-/* i960.c - All the i80960-specific stuff
- Copyright (C) 1989, 1990, 1991 Free Software Foundation, Inc.
+/* tc-i960.c - All the i80960-specific stuff
+ Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2001
+ Free Software Foundation, Inc.
-This file is part of GAS.
+ This file is part of GAS.
-GAS is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+ GAS is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
-GAS is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ GAS is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with GAS; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
-/* $Id$ */
-
-/* See comment on md_parse_option for 80960-specific invocation options. */
-
-/******************************************************************************
- * i80690 NOTE!!!:
- * Header, symbol, and relocation info will be used on the host machine
- * only -- only executable code is actually downloaded to the i80960.
- * Therefore, leave all such information in host byte order.
- *
- * (That's a slight lie -- we DO download some header information, but
- * the downloader converts the file format and corrects the byte-ordering
- * of the relevant fields while doing so.)
- *
- ***************************************************************************** */
+/* See comment on md_parse_option for 80960-specific invocation options. */
/* There are 4 different lengths of (potentially) symbol-based displacements
- * in the 80960 instruction set, each of which could require address fix-ups
- * and (in the case of external symbols) emission of relocation directives:
- *
- * 32-bit (MEMB)
- * This is a standard length for the base assembler and requires no
- * special action.
- *
- * 13-bit (COBR)
- * This is a non-standard length, but the base assembler has a hook for
- * bit field address fixups: the fixS structure can point to a descriptor
- * of the field, in which case our md_number_to_field() routine gets called
- * to process it.
- *
- * I made the hook a little cleaner by having fix_new() (in the base
- * assembler) return a pointer to the fixS in question. And I made it a
- * little simpler by storing the field size (in this case 13) instead of
- * of a pointer to another structure: 80960 displacements are ALWAYS
- * stored in the low-order bits of a 4-byte word.
- *
- * Since the target of a COBR cannot be external, no relocation directives
- * for this size displacement have to be generated. But the base assembler
- * had to be modified to issue error messages if the symbol did turn out
- * to be external.
- *
- * 24-bit (CTRL)
- * Fixups are handled as for the 13-bit case (except that 24 is stored
- * in the fixS).
- *
- * The relocation directive generated is the same as that for the 32-bit
- * displacement, except that it's PC-relative (the 32-bit displacement
- * never is). The i80960 version of the linker needs a mod to
- * distinguish and handle the 24-bit case.
- *
- * 12-bit (MEMA)
- * MEMA formats are always promoted to MEMB (32-bit) if the displacement
- * is based on a symbol, because it could be relocated at link time.
- * The only time we use the 12-bit format is if an absolute value of
- * less than 4096 is specified, in which case we need neither a fixup nor
- * a relocation directive.
- */
+ in the 80960 instruction set, each of which could require address fix-ups
+ and (in the case of external symbols) emission of relocation directives:
+
+ 32-bit (MEMB)
+ This is a standard length for the base assembler and requires no
+ special action.
+
+ 13-bit (COBR)
+ This is a non-standard length, but the base assembler has a
+ hook for bit field address fixups: the fixS structure can
+ point to a descriptor of the field, in which case our
+ md_number_to_field() routine gets called to process it.
+
+ I made the hook a little cleaner by having fix_new() (in the base
+ assembler) return a pointer to the fixS in question. And I made it a
+ little simpler by storing the field size (in this case 13) instead of
+ of a pointer to another structure: 80960 displacements are ALWAYS
+ stored in the low-order bits of a 4-byte word.
+
+ Since the target of a COBR cannot be external, no relocation
+ directives for this size displacement have to be generated.
+ But the base assembler had to be modified to issue error
+ messages if the symbol did turn out to be external.
+
+ 24-bit (CTRL)
+ Fixups are handled as for the 13-bit case (except that 24 is stored
+ in the fixS).
+
+ The relocation directive generated is the same as that for the 32-bit
+ displacement, except that it's PC-relative (the 32-bit displacement
+ never is). The i80960 version of the linker needs a mod to
+ distinguish and handle the 24-bit case.
+
+ 12-bit (MEMA)
+ MEMA formats are always promoted to MEMB (32-bit) if the displacement
+ is based on a symbol, because it could be relocated at link time.
+ The only time we use the 12-bit format is if an absolute value of
+ less than 4096 is specified, in which case we need neither a fixup nor
+ a relocation directive. */
#include <stdio.h>
-#include <ctype.h>
#include "as.h"
+#include "safe-ctype.h"
#include "obstack.h"
-#include "i960-opcode.h"
+#include "opcode/i960.h"
-extern char *input_line_pointer;
-extern struct hash_control *po_hash;
-extern unsigned char nbytes_r_length[];
-extern char *next_object_file_charP;
+#if defined (OBJ_AOUT) || defined (OBJ_BOUT)
+#define TC_S_IS_SYSPROC(s) ((1<=S_GET_OTHER(s)) && (S_GET_OTHER(s)<=32))
+#define TC_S_IS_BALNAME(s) (S_GET_OTHER(s) == N_BALNAME)
+#define TC_S_IS_CALLNAME(s) (S_GET_OTHER(s) == N_CALLNAME)
+#define TC_S_IS_BADPROC(s) ((S_GET_OTHER(s) != 0) && !TC_S_IS_CALLNAME(s) && !TC_S_IS_BALNAME(s) && !TC_S_IS_SYSPROC(s))
+
+#define TC_S_SET_SYSPROC(s, p) (S_SET_OTHER((s), (p)+1))
+#define TC_S_GET_SYSPROC(s) (S_GET_OTHER(s)-1)
+
+#define TC_S_FORCE_TO_BALNAME(s) (S_SET_OTHER((s), N_BALNAME))
+#define TC_S_FORCE_TO_CALLNAME(s) (S_SET_OTHER((s), N_CALLNAME))
+#define TC_S_FORCE_TO_SYSPROC(s) {;}
+
+#else /* ! OBJ_A/BOUT */
#ifdef OBJ_COFF
-int md_reloc_size = sizeof(struct reloc);
-#else /* OBJ_COFF */
-int md_reloc_size = sizeof(struct relocation_info);
-#endif /* OBJ_COFF */
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-#ifdef __STDC__
+#define TC_S_IS_SYSPROC(s) (S_GET_STORAGE_CLASS(s) == C_SCALL)
+#define TC_S_IS_BALNAME(s) (SF_GET_BALNAME(s))
+#define TC_S_IS_CALLNAME(s) (SF_GET_CALLNAME(s))
+#define TC_S_IS_BADPROC(s) (TC_S_IS_SYSPROC(s) && TC_S_GET_SYSPROC(s) < 0 && 31 < TC_S_GET_SYSPROC(s))
-static void emit_machine_reloc(fixS *fixP, relax_addressT segment_address_in_file);
+#define TC_S_SET_SYSPROC(s, p) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx = (p))
+#define TC_S_GET_SYSPROC(s) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx)
-#else /* __STDC__ */
+#define TC_S_FORCE_TO_BALNAME(s) (SF_SET_BALNAME(s))
+#define TC_S_FORCE_TO_CALLNAME(s) (SF_SET_CALLNAME(s))
+#define TC_S_FORCE_TO_SYSPROC(s) (S_SET_STORAGE_CLASS((s), C_SCALL))
-static void emit_machine_reloc();
+#else /* ! OBJ_COFF */
+#ifdef OBJ_ELF
+#define TC_S_IS_SYSPROC(s) 0
-#endif /* __STDC__ */
+#define TC_S_IS_BALNAME(s) 0
+#define TC_S_IS_CALLNAME(s) 0
+#define TC_S_IS_BADPROC(s) 0
-void (*md_emit_relocations)() = emit_machine_reloc;
-#endif /* OBJ_AOUT or OBJ_BOUT */
+#define TC_S_SET_SYSPROC(s, p)
+#define TC_S_GET_SYSPROC(s) 0
+
+#define TC_S_FORCE_TO_BALNAME(s)
+#define TC_S_FORCE_TO_CALLNAME(s)
+#define TC_S_FORCE_TO_SYSPROC(s)
+#else
+ #error COFF, a.out, b.out, and ELF are the only supported formats.
+#endif /* ! OBJ_ELF */
+#endif /* ! OBJ_COFF */
+#endif /* ! OBJ_A/BOUT */
+
+extern char *input_line_pointer;
+
+#if !defined (BFD_ASSEMBLER) && !defined (BFD)
+#ifdef OBJ_COFF
+const int md_reloc_size = sizeof (struct reloc);
+#else /* OBJ_COFF */
+const int md_reloc_size = sizeof (struct relocation_info);
+#endif /* OBJ_COFF */
+#endif
- /***************************
- * Local i80960 routines *
- ************************** */
-
-static void brcnt_emit(); /* Emit branch-prediction instrumentation code */
-static char * brlab_next(); /* Return next branch local label */
- void brtab_emit(); /* Emit br-predict instrumentation table */
-static void cobr_fmt(); /* Generate COBR instruction */
-static void ctrl_fmt(); /* Generate CTRL instruction */
-static char * emit(); /* Emit (internally) binary */
-static int get_args(); /* Break arguments out of comma-separated list */
-static void get_cdisp(); /* Handle COBR or CTRL displacement */
-static char * get_ispec(); /* Find index specification string */
-static int get_regnum(); /* Translate text to register number */
-static int i_scan(); /* Lexical scan of instruction source */
-static void mem_fmt(); /* Generate MEMA or MEMB instruction */
-static void mema_to_memb(); /* Convert MEMA instruction to MEMB format */
-static segT parse_expr(); /* Parse an expression */
-static int parse_ldconst();/* Parse and replace a 'ldconst' pseudo-op */
-static void parse_memop(); /* Parse a memory operand */
-static void parse_po(); /* Parse machine-dependent pseudo-op */
-static void parse_regop(); /* Parse a register operand */
-static void reg_fmt(); /* Generate a REG format instruction */
- void reloc_callj(); /* Relocate a 'callj' instruction */
-static void relax_cobr(); /* "De-optimize" cobr into compare/branch */
-static void s_leafproc(); /* Process '.leafproc' pseudo-op */
-static void s_sysproc(); /* Process '.sysproc' pseudo-op */
-static int shift_ok(); /* Will a 'shlo' substiture for a 'ldconst'? */
-static void syntax(); /* Give syntax error */
-static int targ_has_sfr(); /* Target chip supports spec-func register? */
-static int targ_has_iclass();/* Target chip supports instruction set? */
-/* static void unlink_sym(); */ /* Remove a symbol from the symbol list */
+/* Local i80960 routines. */
+
+static void brcnt_emit (); /* Emit branch-prediction instrumentation code */
+static char *brlab_next (); /* Return next branch local label */
+void brtab_emit (); /* Emit br-predict instrumentation table */
+static void cobr_fmt (); /* Generate COBR instruction */
+static void ctrl_fmt (); /* Generate CTRL instruction */
+static char *emit (); /* Emit (internally) binary */
+static int get_args (); /* Break arguments out of comma-separated list */
+static void get_cdisp (); /* Handle COBR or CTRL displacement */
+static char *get_ispec (); /* Find index specification string */
+static int get_regnum (); /* Translate text to register number */
+static int i_scan (); /* Lexical scan of instruction source */
+static void mem_fmt (); /* Generate MEMA or MEMB instruction */
+static void mema_to_memb (); /* Convert MEMA instruction to MEMB format */
+static void parse_expr (); /* Parse an expression */
+static int parse_ldconst (); /* Parse and replace a 'ldconst' pseudo-op */
+static void parse_memop (); /* Parse a memory operand */
+static void parse_po (); /* Parse machine-dependent pseudo-op */
+static void parse_regop (); /* Parse a register operand */
+static void reg_fmt (); /* Generate a REG format instruction */
+void reloc_callj (); /* Relocate a 'callj' instruction */
+static void relax_cobr (); /* "De-optimize" cobr into compare/branch */
+static void s_leafproc (); /* Process '.leafproc' pseudo-op */
+static void s_sysproc (); /* Process '.sysproc' pseudo-op */
+static int shift_ok (); /* Will a 'shlo' substiture for a 'ldconst'? */
+static void syntax (); /* Give syntax error */
+static int targ_has_sfr (); /* Target chip supports spec-func register? */
+static int targ_has_iclass (); /* Target chip supports instruction set? */
/* See md_parse_option() for meanings of these options */
-static char norelax = 0; /* True if -norelax switch seen */
-static char instrument_branches = 0; /* True if -b switch seen */
+static char norelax; /* True if -norelax switch seen */
+static char instrument_branches; /* True if -b switch seen */
/* Characters that always start a comment.
- * If the pre-processor is disabled, these aren't very useful.
+ If the pre-processor is disabled, these aren't very useful.
*/
-char comment_chars[] = "#";
+const char comment_chars[] = "#";
/* Characters that only start a comment at the beginning of
- * a line. If the line seems to have the form '# 123 filename'
- * .line and .file directives will appear in the pre-processed output.
- *
- * Note that input_file.c hand checks for '#' at the beginning of the
- * first line of the input file. This is because the compiler outputs
- * #NO_APP at the beginning of its output.
+ a line. If the line seems to have the form '# 123 filename'
+ .line and .file directives will appear in the pre-processed output.
+
+ Note that input_file.c hand checks for '#' at the beginning of the
+ first line of the input file. This is because the compiler outputs
+ #NO_APP at the beginning of its output.
*/
-/* Also note that comments started like this one will always work. */
+/* Also note that comments started like this one will always work. */
+
+const char line_comment_chars[] = "";
-char line_comment_chars[] = "";
+const char line_separator_chars[] = ";";
/* Chars that can be used to separate mant from exp in floating point nums */
-char EXP_CHARS[] = "eE";
+const char EXP_CHARS[] = "eE";
/* Chars that mean this number is a floating point constant,
- * as in 0f12.456 or 0d1.2345e12
+ as in 0f12.456 or 0d1.2345e12
*/
-char FLT_CHARS[] = "fFdDtT";
-
+const char FLT_CHARS[] = "fFdDtT";
/* Table used by base assembler to relax addresses based on varying length
- * instructions. The fields are:
- * 1) most positive reach of this state,
- * 2) most negative reach of this state,
- * 3) how many bytes this mode will add to the size of the current frag
- * 4) which index into the table to try if we can't fit into this one.
- *
- * For i80960, the only application is the (de-)optimization of cobr
- * instructions into separate compare and branch instructions when a 13-bit
- * displacement won't hack it.
+ instructions. The fields are:
+ 1) most positive reach of this state,
+ 2) most negative reach of this state,
+ 3) how many bytes this mode will add to the size of the current frag
+ 4) which index into the table to try if we can't fit into this one.
+
+ For i80960, the only application is the (de-)optimization of cobr
+ instructions into separate compare and branch instructions when a 13-bit
+ displacement won't hack it.
*/
-const relax_typeS
-md_relax_table[] = {
- {0, 0, 0,0}, /* State 0 => no more relaxation possible */
- {4088, -4096, 0,2}, /* State 1: conditional branch (cobr) */
- {0x800000-8,-0x800000,4,0}, /* State 2: compare (reg) & branch (ctrl) */
+const relax_typeS md_relax_table[] =
+{
+ {0, 0, 0, 0}, /* State 0 => no more relaxation possible */
+ {4088, -4096, 0, 2}, /* State 1: conditional branch (cobr) */
+ {0x800000 - 8, -0x800000, 4, 0}, /* State 2: compare (reg) & branch (ctrl) */
};
+static void s_endian PARAMS ((int));
/* These are the machine dependent pseudo-ops.
- *
- * This table describes all the machine specific pseudo-ops the assembler
- * has to support. The fields are:
- * pseudo-op name without dot
- * function to call to execute this pseudo-op
- * integer arg to pass to the function
+
+ This table describes all the machine specific pseudo-ops the assembler
+ has to support. The fields are:
+ pseudo-op name without dot
+ function to call to execute this pseudo-op
+ integer arg to pass to the function
*/
#define S_LEAFPROC 1
#define S_SYSPROC 2
-const pseudo_typeS
-md_pseudo_table[] = {
-
- { "bss", s_lcomm, 1 },
- { "extended", float_cons, 't' },
- { "leafproc", parse_po, S_LEAFPROC },
- { "sysproc", parse_po, S_SYSPROC },
+const pseudo_typeS md_pseudo_table[] =
+{
+ {"bss", s_lcomm, 1},
+ {"endian", s_endian, 0},
+ {"extended", float_cons, 't'},
+ {"leafproc", parse_po, S_LEAFPROC},
+ {"sysproc", parse_po, S_SYSPROC},
- { "word", cons, 4 },
- { "quad", big_cons, 16 },
+ {"word", cons, 4},
+ {"quad", cons, 16},
- { 0, 0, 0 }
+ {0, 0, 0}
};
\f
/* Macros to extract info from an 'expressionS' structure 'e' */
#define adds(e) e.X_add_symbol
-#define subs(e) e.X_subtract_symbol
#define offs(e) e.X_add_number
-#define segs(e) e.X_seg
-
/* Branch-prediction bits for CTRL/COBR format opcodes */
-#define BP_MASK 0x00000002 /* Mask for branch-prediction bit */
-#define BP_TAKEN 0x00000000 /* Value to OR in to predict branch */
-#define BP_NOT_TAKEN 0x00000002 /* Value to OR in to predict no branch */
-
+#define BP_MASK 0x00000002 /* Mask for branch-prediction bit */
+#define BP_TAKEN 0x00000000 /* Value to OR in to predict branch */
+#define BP_NOT_TAKEN 0x00000002 /* Value to OR in to predict no branch */
/* Some instruction opcodes that we need explicitly */
#define BE 0x12000000
#define CALLS 0x66003800
#define RET 0x0a000000
-
-/* These masks are used to build up a set of MEMB mode bits. */
+/* These masks are used to build up a set of MEMB mode bits. */
#define A_BIT 0x0400
#define I_BIT 0x0800
#define MEMB_BIT 0x1000
#define D_BIT 0x2000
-
-/* Mask for the only mode bit in a MEMA instruction (if set, abase reg is used) */
+/* Mask for the only mode bit in a MEMA instruction (if set, abase reg is
+ used). */
#define MEMA_ABASE 0x2000
/* Info from which a MEMA or MEMB format instruction can be generated */
-typedef struct {
- long opcode; /* (First) 32 bits of instruction */
- int disp; /* 0-(none), 12- or, 32-bit displacement needed */
- char *e; /* The expression in the source instruction from
- * which the displacement should be determined
- */
-} memS;
-
+typedef struct
+ {
+ /* (First) 32 bits of instruction */
+ long opcode;
+ /* 0-(none), 12- or, 32-bit displacement needed */
+ int disp;
+ /* The expression in the source instruction from which the
+ displacement should be determined. */
+ char *e;
+ }
+
+memS;
/* The two pieces of info we need to generate a register operand */
-struct regop {
- int mode; /* 0 =>local/global/spec reg; 1=> literal or fp reg */
- int special; /* 0 =>not a sfr; 1=> is a sfr (not valid w/mode=0) */
- int n; /* Register number or literal value */
-};
-
-
-/* Number and assembler mnemonic for all registers that can appear in operands */
-static struct {
- char *reg_name;
- int reg_num;
-} regnames[] = {
- { "pfp", 0 }, { "sp", 1 }, { "rip", 2 }, { "r3", 3 },
- { "r4", 4 }, { "r5", 5 }, { "r6", 6 }, { "r7", 7 },
- { "r8", 8 }, { "r9", 9 }, { "r10", 10 }, { "r11", 11 },
- { "r12", 12 }, { "r13", 13 }, { "r14", 14 }, { "r15", 15 },
- { "g0", 16 }, { "g1", 17 }, { "g2", 18 }, { "g3", 19 },
- { "g4", 20 }, { "g5", 21 }, { "g6", 22 }, { "g7", 23 },
- { "g8", 24 }, { "g9", 25 }, { "g10", 26 }, { "g11", 27 },
- { "g12", 28 }, { "g13", 29 }, { "g14", 30 }, { "fp", 31 },
-
- /* Numbers for special-function registers are for assembler internal
- * use only: they are scaled back to range [0-31] for binary output.
- */
-# define SF0 32
-
- { "sf0", 32 }, { "sf1", 33 }, { "sf2", 34 }, { "sf3", 35 },
- { "sf4", 36 }, { "sf5", 37 }, { "sf6", 38 }, { "sf7", 39 },
- { "sf8", 40 }, { "sf9", 41 }, { "sf10",42 }, { "sf11",43 },
- { "sf12",44 }, { "sf13",45 }, { "sf14",46 }, { "sf15",47 },
- { "sf16",48 }, { "sf17",49 }, { "sf18",50 }, { "sf19",51 },
- { "sf20",52 }, { "sf21",53 }, { "sf22",54 }, { "sf23",55 },
- { "sf24",56 }, { "sf25",57 }, { "sf26",58 }, { "sf27",59 },
- { "sf28",60 }, { "sf29",61 }, { "sf30",62 }, { "sf31",63 },
-
- /* Numbers for floating point registers are for assembler internal use
- * only: they are scaled back to [0-3] for binary output.
- */
-# define FP0 64
-
- { "fp0", 64 }, { "fp1", 65 }, { "fp2", 66 }, { "fp3", 67 },
-
- { NULL, 0 }, /* END OF LIST */
+struct regop
+ {
+ int mode; /* 0 =>local/global/spec reg; 1=> literal or fp reg */
+ int special; /* 0 =>not a sfr; 1=> is a sfr (not valid w/mode=0) */
+ int n; /* Register number or literal value */
+ };
+
+/* Number and assembler mnemonic for all registers that can appear in
+ operands. */
+static const struct
+ {
+ char *reg_name;
+ int reg_num;
+ }
+regnames[] =
+{
+ { "pfp", 0 },
+ { "sp", 1 },
+ { "rip", 2 },
+ { "r3", 3 },
+ { "r4", 4 },
+ { "r5", 5 },
+ { "r6", 6 },
+ { "r7", 7 },
+ { "r8", 8 },
+ { "r9", 9 },
+ { "r10", 10 },
+ { "r11", 11 },
+ { "r12", 12 },
+ { "r13", 13 },
+ { "r14", 14 },
+ { "r15", 15 },
+ { "g0", 16 },
+ { "g1", 17 },
+ { "g2", 18 },
+ { "g3", 19 },
+ { "g4", 20 },
+ { "g5", 21 },
+ { "g6", 22 },
+ { "g7", 23 },
+ { "g8", 24 },
+ { "g9", 25 },
+ { "g10", 26 },
+ { "g11", 27 },
+ { "g12", 28 },
+ { "g13", 29 },
+ { "g14", 30 },
+ { "fp", 31 },
+
+ /* Numbers for special-function registers are for assembler internal
+ use only: they are scaled back to range [0-31] for binary output. */
+#define SF0 32
+
+ { "sf0", 32 },
+ { "sf1", 33 },
+ { "sf2", 34 },
+ { "sf3", 35 },
+ { "sf4", 36 },
+ { "sf5", 37 },
+ { "sf6", 38 },
+ { "sf7", 39 },
+ { "sf8", 40 },
+ { "sf9", 41 },
+ { "sf10", 42 },
+ { "sf11", 43 },
+ { "sf12", 44 },
+ { "sf13", 45 },
+ { "sf14", 46 },
+ { "sf15", 47 },
+ { "sf16", 48 },
+ { "sf17", 49 },
+ { "sf18", 50 },
+ { "sf19", 51 },
+ { "sf20", 52 },
+ { "sf21", 53 },
+ { "sf22", 54 },
+ { "sf23", 55 },
+ { "sf24", 56 },
+ { "sf25", 57 },
+ { "sf26", 58 },
+ { "sf27", 59 },
+ { "sf28", 60 },
+ { "sf29", 61 },
+ { "sf30", 62 },
+ { "sf31", 63 },
+
+ /* Numbers for floating point registers are for assembler internal
+ use only: they are scaled back to [0-3] for binary output. */
+#define FP0 64
+
+ { "fp0", 64 },
+ { "fp1", 65 },
+ { "fp2", 66 },
+ { "fp3", 67 },
+
+ { NULL, 0 }, /* END OF LIST */
};
#define IS_RG_REG(n) ((0 <= (n)) && ((n) < SF0))
#define IS_SF_REG(n) ((SF0 <= (n)) && ((n) < FP0))
#define IS_FP_REG(n) ((n) >= FP0)
-/* Number and assembler mnemonic for all registers that can appear as 'abase'
- * (indirect addressing) registers.
- */
-static struct {
- char *areg_name;
- int areg_num;
-} aregs[] = {
- { "(pfp)", 0 }, { "(sp)", 1 }, { "(rip)", 2 }, { "(r3)", 3 },
- { "(r4)", 4 }, { "(r5)", 5 }, { "(r6)", 6 }, { "(r7)", 7 },
- { "(r8)", 8 }, { "(r9)", 9 }, { "(r10)", 10 }, { "(r11)", 11 },
- { "(r12)", 12 }, { "(r13)", 13 }, { "(r14)", 14 }, { "(r15)", 15 },
- { "(g0)", 16 }, { "(g1)", 17 }, { "(g2)", 18 }, { "(g3)", 19 },
- { "(g4)", 20 }, { "(g5)", 21 }, { "(g6)", 22 }, { "(g7)", 23 },
- { "(g8)", 24 }, { "(g9)", 25 }, { "(g10)", 26 }, { "(g11)", 27 },
- { "(g12)", 28 }, { "(g13)", 29 }, { "(g14)", 30 }, { "(fp)", 31 },
-
-# define IPREL 32
- /* for assembler internal use only: this number never appears in binary
- * output.
- */
- { "(ip)", IPREL },
-
- { NULL, 0 }, /* END OF LIST */
+/* Number and assembler mnemonic for all registers that can appear as
+ 'abase' (indirect addressing) registers. */
+static const struct
+ {
+ char *areg_name;
+ int areg_num;
+ }
+aregs[] =
+{
+ { "(pfp)", 0 },
+ { "(sp)", 1 },
+ { "(rip)", 2 },
+ { "(r3)", 3 },
+ { "(r4)", 4 },
+ { "(r5)", 5 },
+ { "(r6)", 6 },
+ { "(r7)", 7 },
+ { "(r8)", 8 },
+ { "(r9)", 9 },
+ { "(r10)", 10 },
+ { "(r11)", 11 },
+ { "(r12)", 12 },
+ { "(r13)", 13 },
+ { "(r14)", 14 },
+ { "(r15)", 15 },
+ { "(g0)", 16 },
+ { "(g1)", 17 },
+ { "(g2)", 18 },
+ { "(g3)", 19 },
+ { "(g4)", 20 },
+ { "(g5)", 21 },
+ { "(g6)", 22 },
+ { "(g7)", 23 },
+ { "(g8)", 24 },
+ { "(g9)", 25 },
+ { "(g10)", 26 },
+ { "(g11)", 27 },
+ { "(g12)", 28 },
+ { "(g13)", 29 },
+ { "(g14)", 30 },
+ { "(fp)", 31 },
+
+#define IPREL 32
+ /* For assembler internal use only: this number never appears in binary
+ output. */
+ { "(ip)", IPREL },
+
+ { NULL, 0 }, /* END OF LIST */
};
-
/* Hash tables */
-static struct hash_control *op_hash = NULL; /* Opcode mnemonics */
-static struct hash_control *reg_hash = NULL; /* Register name hash table */
-static struct hash_control *areg_hash = NULL; /* Abase register hash table */
-
+static struct hash_control *op_hash; /* Opcode mnemonics */
+static struct hash_control *reg_hash; /* Register name hash table */
+static struct hash_control *areg_hash; /* Abase register hash table */
/* Architecture for which we are assembling */
#define ARCH_ANY 0 /* Default: no architecture checking done */
#define ARCH_KB 2
#define ARCH_MC 3
#define ARCH_CA 4
+#define ARCH_JX 5
+#define ARCH_HX 6
int architecture = ARCH_ANY; /* Architecture requested on invocation line */
-int iclasses_seen = 0; /* OR of instruction classes (I_* constants)
- * for which we've actually assembled
- * instructions.
+int iclasses_seen; /* OR of instruction classes (I_* constants)
+ * for which we've actually assembled
+ * instructions.
*/
-
/* BRANCH-PREDICTION INSTRUMENTATION
- *
- * The following supports generation of branch-prediction instrumentation
- * (turned on by -b switch). The instrumentation collects counts
- * of branches taken/not-taken for later input to a utility that will
- * set the branch prediction bits of the instructions in accordance with
- * the behavior observed. (Note that the KX series does not have
- * brach-prediction.)
- *
- * The instrumentation consists of:
- *
- * (1) before and after each conditional branch, a call to an external
- * routine that increments and steps over an inline counter. The
- * counter itself, initialized to 0, immediately follows the call
- * instruction. For each branch, the counter following the branch
- * is the number of times the branch was not taken, and the difference
- * between the counters is the number of times it was taken. An
- * example of an instrumented conditional branch:
- *
- * call BR_CNT_FUNC
- * .word 0
- * LBRANCH23: be label
- * call BR_CNT_FUNC
- * .word 0
- *
- * (2) a table of pointers to the instrumented branches, so that an
- * external postprocessing routine can locate all of the counters.
- * the table begins with a 2-word header: a pointer to the next in
- * a linked list of such tables (initialized to 0); and a count
- * of the number of entries in the table (exclusive of the header.
- *
- * Note that input source code is expected to already contain calls
- * an external routine that will link the branch local table into a
- * list of such tables.
+
+ The following supports generation of branch-prediction instrumentation
+ (turned on by -b switch). The instrumentation collects counts
+ of branches taken/not-taken for later input to a utility that will
+ set the branch prediction bits of the instructions in accordance with
+ the behavior observed. (Note that the KX series does not have
+ brach-prediction.)
+
+ The instrumentation consists of:
+
+ (1) before and after each conditional branch, a call to an external
+ routine that increments and steps over an inline counter. The
+ counter itself, initialized to 0, immediately follows the call
+ instruction. For each branch, the counter following the branch
+ is the number of times the branch was not taken, and the difference
+ between the counters is the number of times it was taken. An
+ example of an instrumented conditional branch:
+
+ call BR_CNT_FUNC
+ .word 0
+ LBRANCH23: be label
+ call BR_CNT_FUNC
+ .word 0
+
+ (2) a table of pointers to the instrumented branches, so that an
+ external postprocessing routine can locate all of the counters.
+ the table begins with a 2-word header: a pointer to the next in
+ a linked list of such tables (initialized to 0); and a count
+ of the number of entries in the table (exclusive of the header.
+
+ Note that input source code is expected to already contain calls
+ an external routine that will link the branch local table into a
+ list of such tables.
*/
-static int br_cnt = 0; /* Number of branches instrumented so far.
- * Also used to generate unique local labels
- * for each instrumented branch
- */
+/* Number of branches instrumented so far. Also used to generate
+ unique local labels for each instrumented branch. */
+static int br_cnt;
#define BR_LABEL_BASE "LBRANCH"
- /* Basename of local labels on instrumented
- * branches, to avoid conflict with compiler-
- * generated local labels.
- */
+/* Basename of local labels on instrumented branches, to avoid
+ conflict with compiler- generated local labels. */
#define BR_CNT_FUNC "__inc_branch"
- /* Name of the external routine that will
- * increment (and step over) an inline counter.
- */
+/* Name of the external routine that will increment (and step over) an
+ inline counter. */
#define BR_TAB_NAME "__BRANCH_TABLE__"
- /* Name of the table of pointers to branches.
- * A local (i.e., non-external) symbol.
- */
+/* Name of the table of pointers to branches. A local (i.e.,
+ non-external) symbol. */
\f
/*****************************************************************************
- * md_begin: One-time initialization.
- *
- * Set up hash tables.
- *
- **************************************************************************** */
+ md_begin: One-time initialization.
+
+ Set up hash tables.
+
+ *************************************************************************** */
void
-md_begin()
+md_begin ()
{
- int i; /* Loop counter */
- const struct i960_opcode *oP; /* Pointer into opcode table */
- char *retval; /* Value returned by hash functions */
+ int i; /* Loop counter */
+ const struct i960_opcode *oP; /* Pointer into opcode table */
+ const char *retval; /* Value returned by hash functions */
- if (((op_hash = hash_new()) == 0)
- || ((reg_hash = hash_new()) == 0)
- || ((areg_hash = hash_new()) == 0)) {
- as_fatal("virtual memory exceeded");
- }
+ op_hash = hash_new ();
+ reg_hash = hash_new ();
+ areg_hash = hash_new ();
- retval = ""; /* For some reason, the base assembler uses an empty
- * string for "no error message", instead of a NULL
- * pointer.
- */
+ /* For some reason, the base assembler uses an empty string for "no
+ error message", instead of a NULL pointer. */
+ retval = 0;
- for (oP=i960_opcodes; oP->name && !*retval; oP++) {
- retval = hash_insert(op_hash, oP->name, oP);
- }
+ for (oP = i960_opcodes; oP->name && !retval; oP++)
+ retval = hash_insert (op_hash, oP->name, (PTR) oP);
- for (i=0; regnames[i].reg_name && !*retval; i++) {
- retval = hash_insert(reg_hash, regnames[i].reg_name,
- ®names[i].reg_num);
- }
+ for (i = 0; regnames[i].reg_name && !retval; i++)
+ retval = hash_insert (reg_hash, regnames[i].reg_name,
+ (char *) ®names[i].reg_num);
- for (i=0; aregs[i].areg_name && !*retval; i++){
- retval = hash_insert(areg_hash, aregs[i].areg_name,
- &aregs[i].areg_num);
- }
+ for (i = 0; aregs[i].areg_name && !retval; i++)
+ retval = hash_insert (areg_hash, aregs[i].areg_name,
+ (char *) &aregs[i].areg_num);
- if (*retval) {
- as_fatal("Hashing returned \"%s\".", retval);
- }
-} /* md_begin() */
+ if (retval)
+ as_fatal (_("Hashing returned \"%s\"."), retval);
+}
/*****************************************************************************
- * md_end: One-time final cleanup
- *
- * None necessary
- *
- **************************************************************************** */
+ md_assemble: Assemble an instruction
+
+ Assumptions about the passed-in text:
+ - all comments, labels removed
+ - text is an instruction
+ - all white space compressed to single blanks
+ - all character constants have been replaced with decimal
+
+ *************************************************************************** */
void
-md_end()
+md_assemble (textP)
+ char *textP; /* Source text of instruction */
{
-}
+ /* Parsed instruction text, containing NO whitespace: arg[0]->opcode
+ mnemonic arg[1-3]->operands, with char constants replaced by
+ decimal numbers. */
+ char *args[4];
+
+ int n_ops; /* Number of instruction operands */
+ /* Pointer to instruction description */
+ struct i960_opcode *oP;
+ /* TRUE iff opcode mnemonic included branch-prediction suffix (".f"
+ or ".t"). */
+ int branch_predict;
+ /* Setting of branch-prediction bit(s) to be OR'd into instruction
+ opcode of CTRL/COBR format instructions. */
+ long bp_bits;
+
+ int n; /* Offset of last character in opcode mnemonic */
+
+ const char *bp_error_msg = _("branch prediction invalid on this opcode");
+
+ /* Parse instruction into opcode and operands */
+ memset (args, '\0', sizeof (args));
+ n_ops = i_scan (textP, args);
+ if (n_ops == -1)
+ {
+ return; /* Error message already issued */
+ }
-/*****************************************************************************
- * md_assemble: Assemble an instruction
- *
- * Assumptions about the passed-in text:
- * - all comments, labels removed
- * - text is an instruction
- * - all white space compressed to single blanks
- * - all character constants have been replaced with decimal
- *
- **************************************************************************** */
-void
-md_assemble(textP)
- char *textP; /* Source text of instruction */
-{
- char *args[4]; /* Parsed instruction text, containing NO whitespace:
- * arg[0]->opcode mnemonic
- * arg[1-3]->operands, with char constants
- * replaced by decimal numbers
- */
- int n_ops; /* Number of instruction operands */
-
- struct i960_opcode *oP;
- /* Pointer to instruction description */
- int branch_predict;
- /* TRUE iff opcode mnemonic included branch-prediction
- * suffix (".f" or ".t")
- */
- long bp_bits; /* Setting of branch-prediction bit(s) to be OR'd
- * into instruction opcode of CTRL/COBR format
- * instructions.
- */
- int n; /* Offset of last character in opcode mnemonic */
-
- static const char bp_error_msg[] = "branch prediction invalid on this opcode";
-
-
- /* Parse instruction into opcode and operands */
- bzero(args, sizeof(args));
- n_ops = i_scan(textP, args);
- if (n_ops == -1){
- return; /* Error message already issued */
+ /* Do "macro substitution" (sort of) on 'ldconst' pseudo-instruction */
+ if (!strcmp (args[0], "ldconst"))
+ {
+ n_ops = parse_ldconst (args);
+ if (n_ops == -1)
+ {
+ return;
}
+ }
- /* Do "macro substitution" (sort of) on 'ldconst' pseudo-instruction */
- if (!strcmp(args[0],"ldconst")){
- n_ops = parse_ldconst(args);
- if (n_ops == -1){
- return;
- }
- }
+ /* Check for branch-prediction suffix on opcode mnemonic, strip it off */
+ n = strlen (args[0]) - 1;
+ branch_predict = 0;
+ bp_bits = 0;
+ if (args[0][n - 1] == '.' && (args[0][n] == 't' || args[0][n] == 'f'))
+ {
+ /* We could check here to see if the target architecture
+ supports branch prediction, but why bother? The bit will
+ just be ignored by processors that don't use it. */
+ branch_predict = 1;
+ bp_bits = (args[0][n] == 't') ? BP_TAKEN : BP_NOT_TAKEN;
+ args[0][n - 1] = '\0'; /* Strip suffix from opcode mnemonic */
+ }
- /* Check for branch-prediction suffix on opcode mnemonic, strip it off */
- n = strlen(args[0]) - 1;
- branch_predict = 0;
- bp_bits = 0;
- if (args[0][n-1] == '.' && (args[0][n] == 't' || args[0][n] == 'f')){
- /* We could check here to see if the target architecture
- * supports branch prediction, but why bother? The bit
- * will just be ignored by processors that don't use it.
- */
- branch_predict = 1;
- bp_bits = (args[0][n] == 't') ? BP_TAKEN : BP_NOT_TAKEN;
- args[0][n-1] = '\0'; /* Strip suffix from opcode mnemonic */
- }
+ /* Look up opcode mnemonic in table and check number of operands.
+ Check that opcode is legal for the target architecture. If all
+ looks good, assemble instruction. */
+ oP = (struct i960_opcode *) hash_find (op_hash, args[0]);
+ if (!oP || !targ_has_iclass (oP->iclass))
+ {
+ as_bad (_("invalid opcode, \"%s\"."), args[0]);
- /* Look up opcode mnemonic in table and check number of operands.
- * Check that opcode is legal for the target architecture.
- * If all looks good, assemble instruction.
- */
- oP = (struct i960_opcode *) hash_find(op_hash, args[0]);
- if (!oP || !targ_has_iclass(oP->iclass)) {
- as_bad("invalid opcode, \"%s\".", args[0]);
-
- } else if (n_ops != oP->num_ops) {
- as_bad("improper number of operands. expecting %d, got %d", oP->num_ops, n_ops);
-
- } else {
- switch (oP->format){
- case FBRA:
- case CTRL:
- ctrl_fmt(args[1], oP->opcode | bp_bits, oP->num_ops);
- if (oP->format == FBRA){
- /* Now generate a 'bno' to same arg */
- ctrl_fmt(args[1], BNO | bp_bits, 1);
- }
- break;
- case COBR:
- case COJ:
- cobr_fmt(args, oP->opcode | bp_bits, oP);
- break;
- case REG:
- if (branch_predict){
- as_warn(bp_error_msg);
- }
- reg_fmt(args, oP);
- break;
- case MEM1:
- case MEM2:
- case MEM4:
- case MEM8:
- case MEM12:
- case MEM16:
- if (branch_predict){
- as_warn(bp_error_msg);
- }
- mem_fmt(args, oP);
- break;
- case CALLJ:
- if (branch_predict){
- as_warn(bp_error_msg);
- }
- /* Output opcode & set up "fixup" (relocation);
- * flag relocation as 'callj' type.
- */
- know(oP->num_ops == 1);
- get_cdisp(args[1], "CTRL", oP->opcode, 24, 0, 1);
- break;
- default:
- BAD_CASE(oP->format);
- break;
+ }
+ else if (n_ops != oP->num_ops)
+ {
+ as_bad (_("improper number of operands. expecting %d, got %d"),
+ oP->num_ops, n_ops);
+ }
+ else
+ {
+ switch (oP->format)
+ {
+ case FBRA:
+ case CTRL:
+ ctrl_fmt (args[1], oP->opcode | bp_bits, oP->num_ops);
+ if (oP->format == FBRA)
+ {
+ /* Now generate a 'bno' to same arg */
+ ctrl_fmt (args[1], BNO | bp_bits, 1);
+ }
+ break;
+ case COBR:
+ case COJ:
+ cobr_fmt (args, oP->opcode | bp_bits, oP);
+ break;
+ case REG:
+ if (branch_predict)
+ {
+ as_warn (bp_error_msg);
+ }
+ reg_fmt (args, oP);
+ break;
+ case MEM1:
+ if (args[0][0] == 'c' && args[0][1] == 'a')
+ {
+ if (branch_predict)
+ {
+ as_warn (bp_error_msg);
}
+ mem_fmt (args, oP, 1);
+ break;
+ }
+ case MEM2:
+ case MEM4:
+ case MEM8:
+ case MEM12:
+ case MEM16:
+ if (branch_predict)
+ {
+ as_warn (bp_error_msg);
+ }
+ mem_fmt (args, oP, 0);
+ break;
+ case CALLJ:
+ if (branch_predict)
+ {
+ as_warn (bp_error_msg);
+ }
+ /* Output opcode & set up "fixup" (relocation); flag
+ relocation as 'callj' type. */
+ know (oP->num_ops == 1);
+ get_cdisp (args[1], "CTRL", oP->opcode, 24, 0, 1);
+ break;
+ default:
+ BAD_CASE (oP->format);
+ break;
}
-} /* md_assemble() */
+ }
+} /* md_assemble() */
/*****************************************************************************
- * md_number_to_chars: convert a number to target byte order
- *
- **************************************************************************** */
-void
-md_number_to_chars(buf, value, n)
- char *buf; /* Put output here */
- long value; /* The integer to be converted */
- int n; /* Number of bytes to output (significant bytes
- * in 'value')
- */
-{
- while (n--){
- *buf++ = value;
- value >>= 8;
- }
+ md_number_to_chars: convert a number to target byte order
- /* XXX line number probably botched for this warning message. */
- if (value != 0 && value != -1){
- as_bad("Displacement too long for instruction field length.");
- }
-} /* md_number_to_chars() */
+ *************************************************************************** */
+void
+md_number_to_chars (buf, value, n)
+ char *buf;
+ valueT value;
+ int n;
+{
+ number_to_chars_littleendian (buf, value, n);
+}
/*****************************************************************************
- * md_chars_to_number: convert from target byte order to host byte order.
- *
- **************************************************************************** */
+ md_chars_to_number: convert from target byte order to host byte order.
+
+ *************************************************************************** */
int
-md_chars_to_number(val, n)
- unsigned char *val; /* Value in target byte order */
- int n; /* Number of bytes in the input */
+md_chars_to_number (val, n)
+ unsigned char *val; /* Value in target byte order */
+ int n; /* Number of bytes in the input */
{
- int retval;
+ int retval;
- for (retval=0; n--;){
- retval <<= 8;
- retval |= val[n];
- }
- return retval;
+ for (retval = 0; n--;)
+ {
+ retval <<= 8;
+ retval |= val[n];
+ }
+ return retval;
}
-
#define MAX_LITTLENUMS 6
-#define LNUM_SIZE sizeof(LITTLENUM_TYPE)
+#define LNUM_SIZE sizeof (LITTLENUM_TYPE)
/*****************************************************************************
- * md_atof: convert ascii to floating point
- *
- * Turn a string at input_line_pointer into a floating point constant of type
- * 'type', and store the appropriate bytes at *litP. The number of LITTLENUMS
- * emitted is returned at 'sizeP'. An error message is returned, or a pointer
- * to an empty message if OK.
- *
- * Note we call the i386 floating point routine, rather than complicating
- * things with more files or symbolic links.
- *
- **************************************************************************** */
-char * md_atof(type, litP, sizeP)
-int type;
-char *litP;
-int *sizeP;
-{
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- int prec;
- char *t;
- char *atof_ieee();
-
- switch(type) {
- case 'f':
- case 'F':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- prec = 4;
- break;
-
- case 't':
- case 'T':
- prec = 5;
- type = 'x'; /* That's what atof_ieee() understands */
- break;
+ md_atof: convert ascii to floating point
- default:
- *sizeP=0;
- return "Bad call to md_atof()";
- }
+ Turn a string at input_line_pointer into a floating point constant of type
+ 'type', and store the appropriate bytes at *litP. The number of LITTLENUMS
+ emitted is returned at 'sizeP'. An error message is returned, or a pointer
+ to an empty message if OK.
- t = atof_ieee(input_line_pointer, type, words);
- if (t){
- input_line_pointer = t;
- }
+ Note we call the i386 floating point routine, rather than complicating
+ things with more files or symbolic links.
+
+ *************************************************************************** */
+char *
+md_atof (type, litP, sizeP)
+ int type;
+ char *litP;
+ int *sizeP;
+{
+ LITTLENUM_TYPE words[MAX_LITTLENUMS];
+ LITTLENUM_TYPE *wordP;
+ int prec;
+ char *t;
+ char *atof_ieee ();
- *sizeP = prec * LNUM_SIZE;
+ switch (type)
+ {
+ case 'f':
+ case 'F':
+ prec = 2;
+ break;
+
+ case 'd':
+ case 'D':
+ prec = 4;
+ break;
+
+ case 't':
+ case 'T':
+ prec = 5;
+ type = 'x'; /* That's what atof_ieee() understands */
+ break;
+
+ default:
+ *sizeP = 0;
+ return _("Bad call to md_atof()");
+ }
+
+ t = atof_ieee (input_line_pointer, type, words);
+ if (t)
+ {
+ input_line_pointer = t;
+ }
- /* Output the LITTLENUMs in REVERSE order in accord with i80960
- * word-order. (Dunno why atof_ieee doesn't do it in the right
- * order in the first place -- probably because it's a hack of
- * atof_m68k.)
- */
+ *sizeP = prec * LNUM_SIZE;
- for(wordP = words + prec - 1; prec--;){
- md_number_to_chars(litP, (long) (*wordP--), LNUM_SIZE);
- litP += sizeof(LITTLENUM_TYPE);
- }
+ /* Output the LITTLENUMs in REVERSE order in accord with i80960
+ word-order. (Dunno why atof_ieee doesn't do it in the right
+ order in the first place -- probably because it's a hack of
+ atof_m68k.) */
- return ""; /* Someone should teach Dean about null pointers */
-}
+ for (wordP = words + prec - 1; prec--;)
+ {
+ md_number_to_chars (litP, (long) (*wordP--), LNUM_SIZE);
+ litP += sizeof (LITTLENUM_TYPE);
+ }
+ return 0;
+}
/*****************************************************************************
- * md_number_to_imm
- *
- **************************************************************************** */
+ md_number_to_imm
+
+ *************************************************************************** */
void
-md_number_to_imm(buf, val, n)
- char *buf;
- long val;
- int n;
+md_number_to_imm (buf, val, n)
+ char *buf;
+ long val;
+ int n;
{
- md_number_to_chars(buf, val, n);
+ md_number_to_chars (buf, val, n);
}
-
/*****************************************************************************
- * md_number_to_disp
- *
- **************************************************************************** */
+ md_number_to_disp
+
+ *************************************************************************** */
void
-md_number_to_disp(buf, val, n)
- char *buf;
- long val;
- int n;
+md_number_to_disp (buf, val, n)
+ char *buf;
+ long val;
+ int n;
{
- md_number_to_chars(buf, val, n);
+ md_number_to_chars (buf, val, n);
}
/*****************************************************************************
- * md_number_to_field:
- *
- * Stick a value (an address fixup) into a bit field of
- * previously-generated instruction.
- *
- **************************************************************************** */
+ md_number_to_field:
+
+ Stick a value (an address fixup) into a bit field of
+ previously-generated instruction.
+
+ *************************************************************************** */
void
-md_number_to_field(instrP, val, bfixP)
- char *instrP; /* Pointer to instruction to be fixed */
- long val; /* Address fixup value */
- bit_fixS *bfixP; /* Description of bit field to be fixed up */
-{
- int numbits; /* Length of bit field to be fixed */
- long instr; /* 32-bit instruction to be fixed-up */
- long sign; /* 0 or -1, according to sign bit of 'val' */
-
- /* Convert instruction back to host byte order
- */
- instr = md_chars_to_number(instrP, 4);
-
- /* Surprise! -- we stored the number of bits
- * to be modified rather than a pointer to a structure.
- */
- numbits = (int)bfixP;
- if (numbits == 1){
- /* This is a no-op, stuck here by reloc_callj() */
- return;
- }
+md_number_to_field (instrP, val, bfixP)
+ char *instrP; /* Pointer to instruction to be fixed */
+ long val; /* Address fixup value */
+ bit_fixS *bfixP; /* Description of bit field to be fixed up */
+{
+ int numbits; /* Length of bit field to be fixed */
+ long instr; /* 32-bit instruction to be fixed-up */
+ long sign; /* 0 or -1, according to sign bit of 'val' */
- know ((numbits==13) || (numbits==24));
-
- /* Propagate sign bit of 'val' for the given number of bits.
- * Result should be all 0 or all 1
- */
- sign = val >> ((int)numbits - 1);
- if (((val < 0) && (sign != -1))
- || ((val > 0) && (sign != 0))){
- as_bad("Fixup of %d too large for field width of %d",
- val, numbits);
- } else {
- /* Put bit field into instruction and write back in target
- * byte order.
- */
- val &= ~(-1 << (int)numbits); /* Clear unused sign bits */
- instr |= val;
- md_number_to_chars(instrP, instr, 4);
- }
-} /* md_number_to_field() */
+ /* Convert instruction back to host byte order. */
+ instr = md_chars_to_number (instrP, 4);
+ /* Surprise! -- we stored the number of bits to be modified rather
+ than a pointer to a structure. */
+ numbits = (int) bfixP;
+ if (numbits == 1)
+ {
+ /* This is a no-op, stuck here by reloc_callj() */
+ return;
+ }
-/*****************************************************************************
- * md_parse_option
- * Invocation line includes a switch not recognized by the base assembler.
- * See if it's a processor-specific option. For the 960, these are:
- *
- * -norelax:
- * Conditional branch instructions that require displacements
- * greater than 13 bits (or that have external targets) should
- * generate errors. The default is to replace each such
- * instruction with the corresponding compare (or chkbit) and
- * branch instructions. Note that the Intel "j" cobr directives
- * are ALWAYS "de-optimized" in this way when necessary,
- * regardless of the setting of this option.
- *
- * -b:
- * Add code to collect information about branches taken, for
- * later optimization of branch prediction bits by a separate
- * tool. COBR and CNTL format instructions have branch
- * prediction bits (in the CX architecture); if "BR" represents
- * an instruction in one of these classes, the following rep-
- * resents the code generated by the assembler:
- *
- * call <increment routine>
- * .word 0 # pre-counter
- * Label: BR
- * call <increment routine>
- * .word 0 # post-counter
- *
- * A table of all such "Labels" is also generated.
- *
- *
- * -AKA, -AKB, -AKC, -ASA, -ASB, -AMC, -ACA:
- * Select the 80960 architecture. Instructions or features not
- * supported by the selected architecture cause fatal errors.
- * The default is to generate code for any instruction or feature
- * that is supported by SOME version of the 960 (even if this
- * means mixing architectures!).
- *
- **************************************************************************** */
-int
-md_parse_option(argP, cntP, vecP)
- char **argP;
- int *cntP;
- char ***vecP;
-{
- char *p;
- struct tabentry { char *flag; int arch; };
- static struct tabentry arch_tab[] = {
- "KA", ARCH_KA,
- "KB", ARCH_KB,
- "SA", ARCH_KA, /* Synonym for KA */
- "SB", ARCH_KB, /* Synonym for KB */
- "KC", ARCH_MC, /* Synonym for MC */
- "MC", ARCH_MC,
- "CA", ARCH_CA,
- NULL, 0
- };
- struct tabentry *tp;
+ know ((numbits == 13) || (numbits == 24));
- if (!strcmp(*argP,"norelax")){
- norelax = 1;
+ /* Propagate sign bit of 'val' for the given number of bits. Result
+ should be all 0 or all 1. */
+ sign = val >> ((int) numbits - 1);
+ if (((val < 0) && (sign != -1))
+ || ((val > 0) && (sign != 0)))
+ {
+ as_bad (_("Fixup of %ld too large for field width of %d"),
+ val, numbits);
+ }
+ else
+ {
+ /* Put bit field into instruction and write back in target
+ * byte order.
+ */
+ val &= ~(-1 << (int) numbits); /* Clear unused sign bits */
+ instr |= val;
+ md_number_to_chars (instrP, instr, 4);
+ }
+} /* md_number_to_field() */
+\f
- } else if (**argP == 'b'){
- instrument_branches = 1;
+/*****************************************************************************
+ md_parse_option
+ Invocation line includes a switch not recognized by the base assembler.
+ See if it's a processor-specific option. For the 960, these are:
+
+ -norelax:
+ Conditional branch instructions that require displacements
+ greater than 13 bits (or that have external targets) should
+ generate errors. The default is to replace each such
+ instruction with the corresponding compare (or chkbit) and
+ branch instructions. Note that the Intel "j" cobr directives
+ are ALWAYS "de-optimized" in this way when necessary,
+ regardless of the setting of this option.
+
+ -b:
+ Add code to collect information about branches taken, for
+ later optimization of branch prediction bits by a separate
+ tool. COBR and CNTL format instructions have branch
+ prediction bits (in the CX architecture); if "BR" represents
+ an instruction in one of these classes, the following rep-
+ resents the code generated by the assembler:
+
+ call <increment routine>
+ .word 0 # pre-counter
+ Label: BR
+ call <increment routine>
+ .word 0 # post-counter
+
+ A table of all such "Labels" is also generated.
+
+ -AKA, -AKB, -AKC, -ASA, -ASB, -AMC, -ACA:
+ Select the 80960 architecture. Instructions or features not
+ supported by the selected architecture cause fatal errors.
+ The default is to generate code for any instruction or feature
+ that is supported by SOME version of the 960 (even if this
+ means mixing architectures!).
+
+ ****************************************************************************/
+
+CONST char *md_shortopts = "A:b";
+struct option md_longopts[] =
+{
+#define OPTION_LINKRELAX (OPTION_MD_BASE)
+ {"linkrelax", no_argument, NULL, OPTION_LINKRELAX},
+ {"link-relax", no_argument, NULL, OPTION_LINKRELAX},
+#define OPTION_NORELAX (OPTION_MD_BASE + 1)
+ {"norelax", no_argument, NULL, OPTION_NORELAX},
+ {"no-relax", no_argument, NULL, OPTION_NORELAX},
+ {NULL, no_argument, NULL, 0}
+};
+size_t md_longopts_size = sizeof (md_longopts);
+
+struct tabentry
+ {
+ char *flag;
+ int arch;
+ };
+static const struct tabentry arch_tab[] =
+{
+ {"KA", ARCH_KA},
+ {"KB", ARCH_KB},
+ {"SA", ARCH_KA}, /* Synonym for KA */
+ {"SB", ARCH_KB}, /* Synonym for KB */
+ {"KC", ARCH_MC}, /* Synonym for MC */
+ {"MC", ARCH_MC},
+ {"CA", ARCH_CA},
+ {"JX", ARCH_JX},
+ {"HX", ARCH_HX},
+ {NULL, 0}
+};
- } else if (**argP == 'A'){
- p = (*argP) + 1;
+int
+md_parse_option (c, arg)
+ int c;
+ char *arg;
+{
+ switch (c)
+ {
+ case OPTION_LINKRELAX:
+ linkrelax = 1;
+ flag_keep_locals = 1;
+ break;
+
+ case OPTION_NORELAX:
+ norelax = 1;
+ break;
+
+ case 'b':
+ instrument_branches = 1;
+ break;
+
+ case 'A':
+ {
+ const struct tabentry *tp;
+ char *p = arg;
+
+ for (tp = arch_tab; tp->flag != NULL; tp++)
+ if (!strcmp (p, tp->flag))
+ break;
+
+ if (tp->flag == NULL)
+ {
+ as_bad (_("invalid architecture %s"), p);
+ return 0;
+ }
+ else
+ architecture = tp->arch;
+ }
+ break;
+
+ default:
+ return 0;
+ }
- for (tp = arch_tab; tp->flag != NULL; tp++){
- if (!strcmp(p,tp->flag)){
- break;
- }
- }
+ return 1;
+}
- if (tp->flag == NULL){
- as_bad("unknown architecture: %s", p);
- } else {
- architecture = tp->arch;
- }
- } else {
- /* Unknown option */
- (*argP)++;
- return 0;
- }
- **argP = '\0'; /* Done parsing this switch */
- return 1;
+void
+md_show_usage (stream)
+ FILE *stream;
+{
+ int i;
+ fprintf (stream, _("I960 options:\n"));
+ for (i = 0; arch_tab[i].flag; i++)
+ fprintf (stream, "%s-A%s", i ? " | " : "", arch_tab[i].flag);
+ fprintf (stream, _("\n\
+ specify variant of 960 architecture\n\
+-b add code to collect statistics about branches taken\n\
+-link-relax preserve individual alignment directives so linker\n\
+ can do relaxing (b.out format only)\n\
+-no-relax don't alter compare-and-branch instructions for\n\
+ long displacements\n"));
}
+\f
/*****************************************************************************
- * md_convert_frag:
- * Called by base assembler after address relaxation is finished: modify
- * variable fragments according to how much relaxation was done.
- *
- * If the fragment substate is still 1, a 13-bit displacement was enough
- * to reach the symbol in question. Set up an address fixup, but otherwise
- * leave the cobr instruction alone.
- *
- * If the fragment substate is 2, a 13-bit displacement was not enough.
- * Replace the cobr with a two instructions (a compare and a branch).
- *
- **************************************************************************** */
+ md_convert_frag:
+ Called by base assembler after address relaxation is finished: modify
+ variable fragments according to how much relaxation was done.
+
+ If the fragment substate is still 1, a 13-bit displacement was enough
+ to reach the symbol in question. Set up an address fixup, but otherwise
+ leave the cobr instruction alone.
+
+ If the fragment substate is 2, a 13-bit displacement was not enough.
+ Replace the cobr with a two instructions (a compare and a branch).
+
+ *************************************************************************** */
+#ifndef BFD_ASSEMBLER
void
-md_convert_frag(fragP)
- fragS * fragP;
+md_convert_frag (headers, seg, fragP)
+ object_headers *headers;
+ segT seg;
+ fragS *fragP;
+#else
+void
+md_convert_frag (abfd, sec, fragP)
+ bfd *abfd;
+ segT sec;
+ fragS *fragP;
+#endif
{
- fixS *fixP; /* Structure describing needed address fix */
+ fixS *fixP; /* Structure describing needed address fix */
- switch (fragP->fr_subtype){
- case 1:
- /* LEAVE SINGLE COBR INSTRUCTION */
- fixP = fix_new(fragP,
- fragP->fr_opcode-fragP->fr_literal,
- 4,
- fragP->fr_symbol,
- 0,
- fragP->fr_offset,
- 1,
- 0);
-
- fixP->fx_bit_fixP = (bit_fixS *) 13; /* size of bit field */
- break;
- case 2:
- /* REPLACE COBR WITH COMPARE/BRANCH INSTRUCTIONS */
- relax_cobr(fragP);
- break;
- default:
- BAD_CASE(fragP->fr_subtype);
- break;
- }
+ switch (fragP->fr_subtype)
+ {
+ case 1:
+ /* LEAVE SINGLE COBR INSTRUCTION */
+ fixP = fix_new (fragP,
+ fragP->fr_opcode - fragP->fr_literal,
+ 4,
+ fragP->fr_symbol,
+ fragP->fr_offset,
+ 1,
+ NO_RELOC);
+
+ fixP->fx_bit_fixP = (bit_fixS *) 13; /* size of bit field */
+ break;
+ case 2:
+ /* REPLACE COBR WITH COMPARE/BRANCH INSTRUCTIONS */
+ relax_cobr (fragP);
+ break;
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
+ }
}
/*****************************************************************************
- * md_estimate_size_before_relax: How much does it look like *fragP will grow?
- *
- * Called by base assembler just before address relaxation.
- * Return the amount by which the fragment will grow.
- *
- * Any symbol that is now undefined will not become defined; cobr's
- * based on undefined symbols will have to be replaced with a compare
- * instruction and a branch instruction, and the code fragment will grow
- * by 4 bytes.
- *
- **************************************************************************** */
+ md_estimate_size_before_relax: How much does it look like *fragP will grow?
+
+ Called by base assembler just before address relaxation.
+ Return the amount by which the fragment will grow.
+
+ Any symbol that is now undefined will not become defined; cobr's
+ based on undefined symbols will have to be replaced with a compare
+ instruction and a branch instruction, and the code fragment will grow
+ by 4 bytes.
+
+ *************************************************************************** */
int
-md_estimate_size_before_relax(fragP, segment_type)
+md_estimate_size_before_relax (fragP, segment_type)
register fragS *fragP;
register segT segment_type;
{
- /* If symbol is undefined in this segment, go to "relaxed" state
- * (compare and branch instructions instead of cobr) right now.
- */
- if (S_GET_SEGMENT(fragP->fr_symbol) != segment_type) {
- relax_cobr(fragP);
- return 4;
- }
- return 0;
-} /* md_estimate_size_before_relax() */
+ /* If symbol is undefined in this segment, go to "relaxed" state
+ (compare and branch instructions instead of cobr) right now. */
+ if (S_GET_SEGMENT (fragP->fr_symbol) != segment_type)
+ {
+ relax_cobr (fragP);
+ return 4;
+ }
+ return 0;
+} /* md_estimate_size_before_relax() */
+#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
/*****************************************************************************
- * md_ri_to_chars:
- * This routine exists in order to overcome machine byte-order problems
- * when dealing with bit-field entries in the relocation_info struct.
- *
- * But relocation info will be used on the host machine only (only
- * executable code is actually downloaded to the i80960). Therefore,
- * we leave it in host byte order.
- *
- **************************************************************************** */
-void md_ri_to_chars(the_bytes, ri)
-char *the_bytes;
-struct reloc_info_generic *ri;
-{
- struct relocation_info br;
-
- (void) bzero(&br, sizeof(br));
-
- br.r_address = ri->r_address;
- br.r_index = ri->r_index;
- br.r_pcrel = ri->r_pcrel;
- br.r_length = ri->r_length;
- br.r_extern = ri->r_extern;
- br.r_bsr = ri->r_bsr;
- br.r_disp = ri->r_disp;
- br.r_callj = ri->r_callj;
-
- *((struct relocation_info *) the_bytes) = br;
-} /* md_ri_to_chars() */
-
-
-#ifndef WORKING_DOT_WORD
-
-int md_short_jump_size = 0;
-int md_long_jump_size = 0;
-
-void md_create_short_jump(ptr, from_addr, to_addr, frag, to_symbol)
-char *ptr;
-long from_addr;
-long to_addr;
-fragS *frag;
-symbolS *to_symbol;
-{
- abort();
-}
+ md_ri_to_chars:
+ This routine exists in order to overcome machine byte-order problems
+ when dealing with bit-field entries in the relocation_info struct.
-void
-md_create_long_jump(ptr,from_addr,to_addr,frag,to_symbol)
- char *ptr;
- long from_addr, to_addr;
- fragS *frag;
- symbolS *to_symbol;
+ But relocation info will be used on the host machine only (only
+ executable code is actually downloaded to the i80960). Therefore,
+ we leave it in host byte order.
+
+ The above comment is no longer true. This routine now really
+ does do the reordering (Ian Taylor 28 Aug 92).
+
+ *************************************************************************** */
+
+static void
+md_ri_to_chars (where, ri)
+ char *where;
+ struct relocation_info *ri;
{
- abort();
+ md_number_to_chars (where, ri->r_address,
+ sizeof (ri->r_address));
+ where[4] = ri->r_index & 0x0ff;
+ where[5] = (ri->r_index >> 8) & 0x0ff;
+ where[6] = (ri->r_index >> 16) & 0x0ff;
+ where[7] = ((ri->r_pcrel << 0)
+ | (ri->r_length << 1)
+ | (ri->r_extern << 3)
+ | (ri->r_bsr << 4)
+ | (ri->r_disp << 5)
+ | (ri->r_callj << 6));
}
-#endif
-\f
- /*************************************************************
- * *
- * FOLLOWING ARE THE LOCAL ROUTINES, IN ALPHABETICAL ORDER *
- * *
- ************************************************************ */
+#endif /* defined(OBJ_AOUT) | defined(OBJ_BOUT) */
+\f
+/* FOLLOWING ARE THE LOCAL ROUTINES, IN ALPHABETICAL ORDER */
/*****************************************************************************
- * brcnt_emit: Emit code to increment inline branch counter.
- *
- * See the comments above the declaration of 'br_cnt' for details on
- * branch-prediction instrumentation.
- **************************************************************************** */
+ brcnt_emit: Emit code to increment inline branch counter.
+
+ See the comments above the declaration of 'br_cnt' for details on
+ branch-prediction instrumentation.
+ *************************************************************************** */
static void
-brcnt_emit()
+brcnt_emit ()
{
- ctrl_fmt(BR_CNT_FUNC,CALL,1);/* Emit call to "increment" routine */
- emit(0); /* Emit inline counter to be incremented */
+ ctrl_fmt (BR_CNT_FUNC, CALL, 1); /* Emit call to "increment" routine */
+ emit (0); /* Emit inline counter to be incremented */
}
/*****************************************************************************
- * brlab_next: generate the next branch local label
- *
- * See the comments above the declaration of 'br_cnt' for details on
- * branch-prediction instrumentation.
- **************************************************************************** */
+ brlab_next: generate the next branch local label
+
+ See the comments above the declaration of 'br_cnt' for details on
+ branch-prediction instrumentation.
+ *************************************************************************** */
static char *
-brlab_next()
+brlab_next ()
{
- static char buf[20];
+ static char buf[20];
- sprintf(buf, "%s%d", BR_LABEL_BASE, br_cnt++);
- return buf;
+ sprintf (buf, "%s%d", BR_LABEL_BASE, br_cnt++);
+ return buf;
}
/*****************************************************************************
- * brtab_emit: generate the fetch-prediction branch table.
- *
- * See the comments above the declaration of 'br_cnt' for details on
- * branch-prediction instrumentation.
- *
- * The code emitted here would be functionally equivalent to the following
- * example assembler source.
- *
- * .data
- * .align 2
- * BR_TAB_NAME:
- * .word 0 # link to next table
- * .word 3 # length of table
- * .word LBRANCH0 # 1st entry in table proper
- * .word LBRANCH1
- * .word LBRANCH2
- ***************************************************************************** */
+ brtab_emit: generate the fetch-prediction branch table.
+
+ See the comments above the declaration of 'br_cnt' for details on
+ branch-prediction instrumentation.
+
+ The code emitted here would be functionally equivalent to the following
+ example assembler source.
+
+ .data
+ .align 2
+ BR_TAB_NAME:
+ .word 0 # link to next table
+ .word 3 # length of table
+ .word LBRANCH0 # 1st entry in table proper
+ .word LBRANCH1
+ .word LBRANCH2
+ **************************************************************************** */
void
-brtab_emit()
+brtab_emit ()
{
- int i;
- char buf[20];
- char *p; /* Where the binary was output to */
- fixS *fixP; /*->description of deferred address fixup */
+ int i;
+ char buf[20];
+ char *p; /* Where the binary was output to */
+ /* Pointer to description of deferred address fixup. */
+ fixS *fixP;
- if (!instrument_branches){
- return;
- }
+ if (!instrument_branches)
+ {
+ return;
+ }
- subseg_new(SEG_DATA,0); /* .data */
- frag_align(2,0); /* .align 2 */
- record_alignment(now_seg,2);
- colon(BR_TAB_NAME); /* BR_TAB_NAME: */
- emit(0); /* .word 0 #link to next table */
- emit(br_cnt); /* .word n #length of table */
-
- for (i=0; i<br_cnt; i++){
- sprintf(buf, "%s%d", BR_LABEL_BASE, i);
- p = emit(0);
- fixP = fix_new(frag_now,
- p - frag_now->fr_literal,
- 4,
- symbol_find(buf),
- 0,
- 0,
- 0,
- 0);
- fixP->fx_im_disp = 2; /* 32-bit displacement fix */
- }
+ subseg_set (data_section, 0); /* .data */
+ frag_align (2, 0, 0); /* .align 2 */
+ record_alignment (now_seg, 2);
+ colon (BR_TAB_NAME); /* BR_TAB_NAME: */
+ emit (0); /* .word 0 #link to next table */
+ emit (br_cnt); /* .word n #length of table */
+
+ for (i = 0; i < br_cnt; i++)
+ {
+ sprintf (buf, "%s%d", BR_LABEL_BASE, i);
+ p = emit (0);
+ fixP = fix_new (frag_now,
+ p - frag_now->fr_literal,
+ 4,
+ symbol_find (buf),
+ 0,
+ 0,
+ NO_RELOC);
+ }
}
/*****************************************************************************
- * cobr_fmt: generate a COBR-format instruction
- *
- **************************************************************************** */
+ cobr_fmt: generate a COBR-format instruction
+
+ *************************************************************************** */
static
void
-cobr_fmt(arg, opcode, oP)
- char *arg[]; /* arg[0]->opcode mnemonic, arg[1-3]->operands (ascii) */
- long opcode; /* Opcode, with branch-prediction bits already set
- * if necessary.
- */
- struct i960_opcode *oP;
- /*->description of instruction */
-{
- long instr; /* 32-bit instruction */
- struct regop regop; /* Description of register operand */
- int n; /* Number of operands */
- int var_frag; /* 1 if varying length code fragment should
- * be emitted; 0 if an address fix
- * should be emitted.
+cobr_fmt (arg, opcode, oP)
+ /* arg[0]->opcode mnemonic, arg[1-3]->operands (ascii) */
+ char *arg[];
+ /* Opcode, with branch-prediction bits already set if necessary. */
+ long opcode;
+ /* Pointer to description of instruction. */
+ struct i960_opcode *oP;
+{
+ long instr; /* 32-bit instruction */
+ struct regop regop; /* Description of register operand */
+ int n; /* Number of operands */
+ int var_frag; /* 1 if varying length code fragment should
+ * be emitted; 0 if an address fix
+ * should be emitted.
*/
- instr = opcode;
- n = oP->num_ops;
+ instr = opcode;
+ n = oP->num_ops;
- if (n >= 1) {
- /* First operand (if any) of a COBR is always a register
- * operand. Parse it.
- */
- parse_regop(®op, arg[1], oP->operand[0]);
- instr |= (regop.n << 19) | (regop.mode << 13);
- }
- if (n >= 2) {
- /* Second operand (if any) of a COBR is always a register
- * operand. Parse it.
- */
- parse_regop(®op, arg[2], oP->operand[1]);
- instr |= (regop.n << 14) | regop.special;
- }
+ if (n >= 1)
+ {
+ /* First operand (if any) of a COBR is always a register
+ operand. Parse it. */
+ parse_regop (®op, arg[1], oP->operand[0]);
+ instr |= (regop.n << 19) | (regop.mode << 13);
+ }
+ if (n >= 2)
+ {
+ /* Second operand (if any) of a COBR is always a register
+ operand. Parse it. */
+ parse_regop (®op, arg[2], oP->operand[1]);
+ instr |= (regop.n << 14) | regop.special;
+ }
+ if (n < 3)
+ {
+ emit (instr);
- if (n < 3){
- emit(instr);
+ }
+ else
+ {
+ if (instrument_branches)
+ {
+ brcnt_emit ();
+ colon (brlab_next ());
+ }
- } else {
- if (instrument_branches){
- brcnt_emit();
- colon(brlab_next());
- }
+ /* A third operand to a COBR is always a displacement. Parse
+ it; if it's relaxable (a cobr "j" directive, or any cobr
+ other than bbs/bbc when the "-norelax" option is not in use)
+ set up a variable code fragment; otherwise set up an address
+ fix. */
+ var_frag = !norelax || (oP->format == COJ); /* TRUE or FALSE */
+ get_cdisp (arg[3], "COBR", instr, 13, var_frag, 0);
- /* A third operand to a COBR is always a displacement.
- * Parse it; if it's relaxable (a cobr "j" directive, or any
- * cobr other than bbs/bbc when the "-norelax" option is not in
- * use) set up a variable code fragment; otherwise set up an
- * address fix.
- */
- var_frag = !norelax || (oP->format == COJ); /* TRUE or FALSE */
- get_cdisp(arg[3], "COBR", instr, 13, var_frag, 0);
-
- if (instrument_branches){
- brcnt_emit();
- }
+ if (instrument_branches)
+ {
+ brcnt_emit ();
}
-} /* cobr_fmt() */
-
+ }
+} /* cobr_fmt() */
/*****************************************************************************
- * ctrl_fmt: generate a CTRL-format instruction
- *
- **************************************************************************** */
+ ctrl_fmt: generate a CTRL-format instruction
+
+ *************************************************************************** */
static
void
-ctrl_fmt(targP, opcode, num_ops)
- char *targP; /* Pointer to text of lone operand (if any) */
- long opcode; /* Template of instruction */
- int num_ops; /* Number of operands */
+ctrl_fmt (targP, opcode, num_ops)
+ char *targP; /* Pointer to text of lone operand (if any) */
+ long opcode; /* Template of instruction */
+ int num_ops; /* Number of operands */
{
- int instrument; /* TRUE iff we should add instrumentation to track
- * how often the branch is taken
- */
-
+ int instrument; /* TRUE iff we should add instrumentation to track
+ * how often the branch is taken
+ */
- if (num_ops == 0){
- emit(opcode); /* Output opcode */
- } else {
+ if (num_ops == 0)
+ {
+ emit (opcode); /* Output opcode */
+ }
+ else
+ {
- instrument = instrument_branches && (opcode!=CALL)
- && (opcode!=B) && (opcode!=RET) && (opcode!=BAL);
+ instrument = instrument_branches && (opcode != CALL)
+ && (opcode != B) && (opcode != RET) && (opcode != BAL);
- if (instrument){
- brcnt_emit();
- colon(brlab_next());
- }
+ if (instrument)
+ {
+ brcnt_emit ();
+ colon (brlab_next ());
+ }
- /* The operand MUST be an ip-relative displacment. Parse it
- * and set up address fix for the instruction we just output.
- */
- get_cdisp(targP, "CTRL", opcode, 24, 0, 0);
+ /* The operand MUST be an ip-relative displacment. Parse it
+ * and set up address fix for the instruction we just output.
+ */
+ get_cdisp (targP, "CTRL", opcode, 24, 0, 0);
- if (instrument){
- brcnt_emit();
- }
+ if (instrument)
+ {
+ brcnt_emit ();
}
+ }
}
-
/*****************************************************************************
- * emit: output instruction binary
- *
- * Output instruction binary, in target byte order, 4 bytes at a time.
- * Return pointer to where it was placed.
- *
- **************************************************************************** */
+ emit: output instruction binary
+
+ Output instruction binary, in target byte order, 4 bytes at a time.
+ Return pointer to where it was placed.
+
+ *************************************************************************** */
static
char *
-emit(instr)
- long instr; /* Word to be output, host byte order */
+emit (instr)
+ long instr; /* Word to be output, host byte order */
{
- char *toP; /* Where to output it */
+ char *toP; /* Where to output it */
- toP = frag_more(4); /* Allocate storage */
- md_number_to_chars(toP, instr, 4); /* Convert to target byte order */
- return toP;
+ toP = frag_more (4); /* Allocate storage */
+ md_number_to_chars (toP, instr, 4); /* Convert to target byte order */
+ return toP;
}
-
/*****************************************************************************
- * get_args: break individual arguments out of comma-separated list
- *
- * Input assumptions:
- * - all comments and labels have been removed
- * - all strings of whitespace have been collapsed to a single blank.
- * - all character constants ('x') have been replaced with decimal
- *
- * Output:
- * args[0] is untouched. args[1] points to first operand, etc. All args:
- * - are NULL-terminated
- * - contain no whitespace
- *
- * Return value:
- * Number of operands (0,1,2, or 3) or -1 on error.
- *
- **************************************************************************** */
-static int get_args(p, args)
- register char *p; /* Pointer to comma-separated operands; MUCKED BY US */
- char *args[]; /* Output arg: pointers to operands placed in args[1-3].
- * MUST ACCOMMODATE 4 ENTRIES (args[0-3]).
- */
-{
- register int n; /* Number of operands */
- register char *to;
-/* char buf[4]; */
-/* int len; */
-
-
- /* Skip lead white space */
- while (*p == ' '){
- p++;
- }
-
- if (*p == '\0'){
- return 0;
- }
+ get_args: break individual arguments out of comma-separated list
+
+ Input assumptions:
+ - all comments and labels have been removed
+ - all strings of whitespace have been collapsed to a single blank.
+ - all character constants ('x') have been replaced with decimal
+
+ Output:
+ args[0] is untouched. args[1] points to first operand, etc. All args:
+ - are NULL-terminated
+ - contain no whitespace
+
+ Return value:
+ Number of operands (0,1,2, or 3) or -1 on error.
+
+ *************************************************************************** */
+static int
+get_args (p, args)
+ /* Pointer to comma-separated operands; MUCKED BY US */
+ register char *p;
+ /* Output arg: pointers to operands placed in args[1-3]. MUST
+ ACCOMMODATE 4 ENTRIES (args[0-3]). */
+ char *args[];
+{
+ register int n; /* Number of operands */
+ register char *to;
- n = 1;
- args[1] = p;
+ /* Skip lead white space */
+ while (*p == ' ')
+ {
+ p++;
+ }
- /* Squeze blanks out by moving non-blanks toward start of string.
- * Isolate operands, whenever comma is found.
- */
- to = p;
- while (*p != '\0'){
+ if (*p == '\0')
+ {
+ return 0;
+ }
- if (*p == ' '){
- p++;
+ n = 1;
+ args[1] = p;
- } else if (*p == ','){
+ /* Squeze blanks out by moving non-blanks toward start of string.
+ * Isolate operands, whenever comma is found.
+ */
+ to = p;
+ while (*p != '\0')
+ {
- /* Start of operand */
- if (n == 3){
- as_bad("too many operands");
- return -1;
- }
- *to++ = '\0'; /* Terminate argument */
- args[++n] = to; /* Start next argument */
- p++;
+ if (*p == ' '
+ && (! ISALNUM (p[1])
+ || ! ISALNUM (p[-1])))
+ {
+ p++;
- } else {
- *to++ = *p++;
- }
}
- *to = '\0';
- return n;
-}
-
-
-/*****************************************************************************
- * get_cdisp: handle displacement for a COBR or CTRL instruction.
- *
- * Parse displacement for a COBR or CTRL instruction.
- *
- * If successful, output the instruction opcode and set up for it,
- * depending on the arg 'var_frag', either:
- * o an address fixup to be done when all symbol values are known, or
- * o a varying length code fragment, with address fixup info. This
- * will be done for cobr instructions that may have to be relaxed
- * in to compare/branch instructions (8 bytes) if the final address
- * displacement is greater than 13 bits.
- *
- **************************************************************************** */
-static
-void
-get_cdisp(dispP, ifmtP, instr, numbits, var_frag, callj)
- char *dispP; /*->displacement as specified in source instruction */
- char *ifmtP; /*->"COBR" or "CTRL" (for use in error message) */
- long instr; /* Instruction needing the displacement */
- int numbits; /* # bits of displacement (13 for COBR, 24 for CTRL) */
- int var_frag; /* 1 if varying length code fragment should be emitted;
- * 0 if an address fix should be emitted.
- */
- int callj; /* 1 if callj relocation should be done; else 0 */
-{
- expressionS e; /* Parsed expression */
- fixS *fixP; /* Structure describing needed address fix */
- char *outP; /* Where instruction binary is output to */
-
- fixP = NULL;
-
- switch (parse_expr(dispP,&e)) {
-
- case SEG_GOOF:
- as_bad("expression syntax error");
- break;
-
- case SEG_TEXT:
- case SEG_UNKNOWN:
- if (var_frag) {
- outP = frag_more(8); /* Allocate worst-case storage */
- md_number_to_chars(outP, instr, 4);
- frag_variant(rs_machine_dependent, 4, 4, 1,
- adds(e), offs(e), outP, 0, 0);
- } else {
- /* Set up a new fix structure, so address can be updated
- * when all symbol values are known.
- */
- outP = emit(instr);
- fixP = fix_new(frag_now,
- outP - frag_now->fr_literal,
- 4,
- adds(e),
- 0,
- offs(e),
- 1,
- 0);
-
- fixP->fx_callj = callj;
-
- /* We want to modify a bit field when the address is
- * known. But we don't need all the garbage in the
- * bit_fix structure. So we're going to lie and store
- * the number of bits affected instead of a pointer.
- */
- fixP->fx_bit_fixP = (bit_fixS *) numbits;
- }
- break;
+ else if (*p == ',')
+ {
- case SEG_DATA:
- case SEG_BSS:
- as_bad("attempt to branch into different segment");
- break;
+ /* Start of operand */
+ if (n == 3)
+ {
+ as_bad (_("too many operands"));
+ return -1;
+ }
+ *to++ = '\0'; /* Terminate argument */
+ args[++n] = to; /* Start next argument */
+ p++;
- default:
- as_bad("target of %s instruction must be a label", ifmtP);
- break;
}
+ else
+ {
+ *to++ = *p++;
+ }
+ }
+ *to = '\0';
+ return n;
}
-
/*****************************************************************************
- * get_ispec: parse a memory operand for an index specification
- *
- * Here, an "index specification" is taken to be anything surrounded
- * by square brackets and NOT followed by anything else.
- *
- * If it's found, detach it from the input string, remove the surrounding
- * square brackets, and return a pointer to it. Otherwise, return NULL.
- *
- **************************************************************************** */
-static
-char *
-get_ispec(textP)
- char *textP; /*->memory operand from source instruction, no white space */
-{
- char *start; /*->start of index specification */
- char *end; /*->end of index specification */
+ get_cdisp: handle displacement for a COBR or CTRL instruction.
- /* Find opening square bracket, if any
- */
- start = index(textP, '[');
+ Parse displacement for a COBR or CTRL instruction.
- if (start != NULL){
+ If successful, output the instruction opcode and set up for it,
+ depending on the arg 'var_frag', either:
+ o an address fixup to be done when all symbol values are known, or
+ o a varying length code fragment, with address fixup info. This
+ will be done for cobr instructions that may have to be relaxed
+ in to compare/branch instructions (8 bytes) if the final
+ address displacement is greater than 13 bits.
- /* Eliminate '[', detach from rest of operand */
- *start++ = '\0';
+ ****************************************************************************/
+static
+void
+get_cdisp (dispP, ifmtP, instr, numbits, var_frag, callj)
+ /* displacement as specified in source instruction */
+ char *dispP;
+ /* "COBR" or "CTRL" (for use in error message) */
+ char *ifmtP;
+ /* Instruction needing the displacement */
+ long instr;
+ /* # bits of displacement (13 for COBR, 24 for CTRL) */
+ int numbits;
+ /* 1 if varying length code fragment should be emitted;
+ * 0 if an address fix should be emitted.
+ */
+ int var_frag;
+ /* 1 if callj relocation should be done; else 0 */
+ int callj;
+{
+ expressionS e; /* Parsed expression */
+ fixS *fixP; /* Structure describing needed address fix */
+ char *outP; /* Where instruction binary is output to */
- end = index(start, ']');
+ fixP = NULL;
- if (end == NULL){
- as_bad("unmatched '['");
+ parse_expr (dispP, &e);
+ switch (e.X_op)
+ {
+ case O_illegal:
+ as_bad (_("expression syntax error"));
- } else {
- /* Eliminate ']' and make sure it was the last thing
- * in the string.
- */
- *end = '\0';
- if (*(end+1) != '\0'){
- as_bad("garbage after index spec ignored");
- }
- }
- }
- return start;
-}
+ case O_symbol:
+ if (S_GET_SEGMENT (e.X_add_symbol) == now_seg
+ || S_GET_SEGMENT (e.X_add_symbol) == undefined_section)
+ {
+ if (var_frag)
+ {
+ outP = frag_more (8); /* Allocate worst-case storage */
+ md_number_to_chars (outP, instr, 4);
+ frag_variant (rs_machine_dependent, 4, 4, 1,
+ adds (e), offs (e), outP);
+ }
+ else
+ {
+ /* Set up a new fix structure, so address can be updated
+ * when all symbol values are known.
+ */
+ outP = emit (instr);
+ fixP = fix_new (frag_now,
+ outP - frag_now->fr_literal,
+ 4,
+ adds (e),
+ offs (e),
+ 1,
+ NO_RELOC);
+
+ fixP->fx_tcbit = callj;
+
+ /* We want to modify a bit field when the address is
+ * known. But we don't need all the garbage in the
+ * bit_fix structure. So we're going to lie and store
+ * the number of bits affected instead of a pointer.
+ */
+ fixP->fx_bit_fixP = (bit_fixS *) numbits;
+ }
+ }
+ else
+ as_bad (_("attempt to branch into different segment"));
+ break;
+
+ default:
+ as_bad (_("target of %s instruction must be a label"), ifmtP);
+ break;
+ }
+}
/*****************************************************************************
- * get_regnum:
- *
- * Look up a (suspected) register name in the register table and return the
- * associated register number (or -1 if not found).
- *
- **************************************************************************** */
+ get_ispec: parse a memory operand for an index specification
+
+ Here, an "index specification" is taken to be anything surrounded
+ by square brackets and NOT followed by anything else.
+
+ If it's found, detach it from the input string, remove the surrounding
+ square brackets, and return a pointer to it. Otherwise, return NULL.
+
+ *************************************************************************** */
static
-int
-get_regnum(regname)
- char *regname; /* Suspected register name */
+char *
+get_ispec (textP)
+ /* Pointer to memory operand from source instruction, no white space. */
+ char *textP;
{
- int *rP;
+ /* Points to start of index specification. */
+ char *start;
+ /* Points to end of index specification. */
+ char *end;
- rP = (int *) hash_find(reg_hash, regname);
- return (rP == NULL) ? -1 : *rP;
-}
+ /* Find opening square bracket, if any. */
+ start = strchr (textP, '[');
+ if (start != NULL)
+ {
-/*****************************************************************************
- * i_scan: perform lexical scan of ascii assembler instruction.
- *
- * Input assumptions:
- * - input string is an i80960 instruction (not a pseudo-op)
- * - all comments and labels have been removed
- * - all strings of whitespace have been collapsed to a single blank.
- *
- * Output:
- * args[0] points to opcode, other entries point to operands. All strings:
- * - are NULL-terminated
- * - contain no whitespace
- * - have character constants ('x') replaced with a decimal number
- *
- * Return value:
- * Number of operands (0,1,2, or 3) or -1 on error.
- *
- **************************************************************************** */
-static int i_scan(iP, args)
- register char *iP; /* Pointer to ascii instruction; MUCKED BY US. */
- char *args[]; /* Output arg: pointers to opcode and operands placed
- * here. MUST ACCOMMODATE 4 ENTRIES.
- */
-{
-
- /* Isolate opcode */
- if (*(iP) == ' ') {
- iP++;
- } /* Skip lead space, if any */
- args[0] = iP;
- for (; *iP != ' '; iP++) {
- if (*iP == '\0') {
- /* There are no operands */
- if (args[0] == iP) {
- /* We never moved: there was no opcode either! */
- as_bad("missing opcode");
- return -1;
- }
- return 0;
- }
+ /* Eliminate '[', detach from rest of operand */
+ *start++ = '\0';
+
+ end = strchr (start, ']');
+
+ if (end == NULL)
+ {
+ as_bad (_("unmatched '['"));
+
+ }
+ else
+ {
+ /* Eliminate ']' and make sure it was the last thing
+ * in the string.
+ */
+ *end = '\0';
+ if (*(end + 1) != '\0')
+ {
+ as_bad (_("garbage after index spec ignored"));
+ }
}
- *iP++ = '\0'; /* Terminate opcode */
- return(get_args(iP, args));
-} /* i_scan() */
+ }
+ return start;
+}
+
+/*****************************************************************************
+ get_regnum:
+ Look up a (suspected) register name in the register table and return the
+ associated register number (or -1 if not found).
+
+ *************************************************************************** */
+static
+int
+get_regnum (regname)
+ char *regname; /* Suspected register name */
+{
+ int *rP;
+
+ rP = (int *) hash_find (reg_hash, regname);
+ return (rP == NULL) ? -1 : *rP;
+}
/*****************************************************************************
- * mem_fmt: generate a MEMA- or MEMB-format instruction
- *
- **************************************************************************** */
-static void mem_fmt(args, oP)
- char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
- struct i960_opcode *oP; /* Pointer to description of instruction */
-{
- int i; /* Loop counter */
- struct regop regop; /* Description of register operand */
- char opdesc; /* Operand descriptor byte */
- memS instr; /* Description of binary to be output */
- char *outP; /* Where the binary was output to */
- expressionS expr; /* Parsed expression */
- fixS *fixP; /*->description of deferred address fixup */
-
- bzero(&instr, sizeof(memS));
- instr.opcode = oP->opcode;
-
- /* Process operands. */
- for (i = 1; i <= oP->num_ops; i++){
- opdesc = oP->operand[i-1];
-
- if (MEMOP(opdesc)){
- parse_memop(&instr, args[i], oP->format);
- } else {
- parse_regop(®op, args[i], opdesc);
- instr.opcode |= regop.n << 19;
- }
+ i_scan: perform lexical scan of ascii assembler instruction.
+
+ Input assumptions:
+ - input string is an i80960 instruction (not a pseudo-op)
+ - all comments and labels have been removed
+ - all strings of whitespace have been collapsed to a single blank.
+
+ Output:
+ args[0] points to opcode, other entries point to operands. All strings:
+ - are NULL-terminated
+ - contain no whitespace
+ - have character constants ('x') replaced with a decimal number
+
+ Return value:
+ Number of operands (0,1,2, or 3) or -1 on error.
+
+ *************************************************************************** */
+static int
+i_scan (iP, args)
+ /* Pointer to ascii instruction; MUCKED BY US. */
+ register char *iP;
+ /* Output arg: pointers to opcode and operands placed here. MUST
+ ACCOMMODATE 4 ENTRIES. */
+ char *args[];
+{
+
+ /* Isolate opcode */
+ if (*(iP) == ' ')
+ {
+ iP++;
+ } /* Skip lead space, if any */
+ args[0] = iP;
+ for (; *iP != ' '; iP++)
+ {
+ if (*iP == '\0')
+ {
+ /* There are no operands */
+ if (args[0] == iP)
+ {
+ /* We never moved: there was no opcode either! */
+ as_bad (_("missing opcode"));
+ return -1;
+ }
+ return 0;
}
+ }
+ *iP++ = '\0'; /* Terminate opcode */
+ return (get_args (iP, args));
+} /* i_scan() */
- /* Output opcode */
- outP = emit(instr.opcode);
+/*****************************************************************************
+ mem_fmt: generate a MEMA- or MEMB-format instruction
- if (instr.disp == 0){
- return;
+ *************************************************************************** */
+static void
+mem_fmt (args, oP, callx)
+ char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
+ struct i960_opcode *oP; /* Pointer to description of instruction */
+ int callx; /* Is this a callx opcode */
+{
+ int i; /* Loop counter */
+ struct regop regop; /* Description of register operand */
+ char opdesc; /* Operand descriptor byte */
+ memS instr; /* Description of binary to be output */
+ char *outP; /* Where the binary was output to */
+ expressionS expr; /* Parsed expression */
+ /* ->description of deferred address fixup */
+ fixS *fixP;
+
+#ifdef OBJ_COFF
+ /* COFF support isn't in place yet for callx relaxing. */
+ callx = 0;
+#endif
+
+ memset (&instr, '\0', sizeof (memS));
+ instr.opcode = oP->opcode;
+
+ /* Process operands. */
+ for (i = 1; i <= oP->num_ops; i++)
+ {
+ opdesc = oP->operand[i - 1];
+
+ if (MEMOP (opdesc))
+ {
+ parse_memop (&instr, args[i], oP->format);
+ }
+ else
+ {
+ parse_regop (®op, args[i], opdesc);
+ instr.opcode |= regop.n << 19;
}
+ }
- /* Parse and process the displacement */
- switch (parse_expr(instr.e,&expr)){
-
- case SEG_GOOF:
- as_bad("expression syntax error");
- break;
-
- case SEG_ABSOLUTE:
- if (instr.disp == 32){
- (void) emit(offs(expr)); /* Output displacement */
- } else {
- /* 12-bit displacement */
- if (offs(expr) & ~0xfff){
- /* Won't fit in 12 bits: convert already-output
- * instruction to MEMB format, output
- * displacement.
- */
- mema_to_memb(outP);
- (void) emit(offs(expr));
- } else {
- /* WILL fit in 12 bits: OR into opcode and
- * overwrite the binary we already put out
- */
- instr.opcode |= offs(expr);
- md_number_to_chars(outP, instr.opcode, 4);
- }
- }
- break;
-
- case SEG_DIFFERENCE:
- case SEG_TEXT:
- case SEG_DATA:
- case SEG_BSS:
- case SEG_UNKNOWN:
- if (instr.disp == 12){
- /* Displacement is dependent on a symbol, whose value
- * may change at link time. We HAVE to reserve 32 bits.
- * Convert already-output opcode to MEMB format.
- */
- mema_to_memb(outP);
- }
+ /* Parse the displacement; this must be done before emitting the
+ opcode, in case it is an expression using `.'. */
+ parse_expr (instr.e, &expr);
- /* Output 0 displacement and set up address fixup for when
- * this symbol's value becomes known.
- */
- outP = emit((long) 0);
- fixP = fix_new(frag_now,
- outP - frag_now->fr_literal,
- 4,
- adds(expr),
- subs(expr),
- offs(expr),
- 0,
- 0);
- fixP->fx_im_disp = 2; /* 32-bit displacement fix */
- break;
+ /* Output opcode */
+ outP = emit (instr.opcode);
- default:
- BAD_CASE(segs(expr));
- break;
+ if (instr.disp == 0)
+ {
+ return;
+ }
+
+ /* Process the displacement */
+ switch (expr.X_op)
+ {
+ case O_illegal:
+ as_bad (_("expression syntax error"));
+ break;
+
+ case O_constant:
+ if (instr.disp == 32)
+ {
+ (void) emit (offs (expr)); /* Output displacement */
}
-} /* memfmt() */
+ else
+ {
+ /* 12-bit displacement */
+ if (offs (expr) & ~0xfff)
+ {
+ /* Won't fit in 12 bits: convert already-output
+ * instruction to MEMB format, output
+ * displacement.
+ */
+ mema_to_memb (outP);
+ (void) emit (offs (expr));
+ }
+ else
+ {
+ /* WILL fit in 12 bits: OR into opcode and
+ * overwrite the binary we already put out
+ */
+ instr.opcode |= offs (expr);
+ md_number_to_chars (outP, instr.opcode, 4);
+ }
+ }
+ break;
+ default:
+ if (instr.disp == 12)
+ {
+ /* Displacement is dependent on a symbol, whose value
+ * may change at link time. We HAVE to reserve 32 bits.
+ * Convert already-output opcode to MEMB format.
+ */
+ mema_to_memb (outP);
+ }
+
+ /* Output 0 displacement and set up address fixup for when
+ * this symbol's value becomes known.
+ */
+ outP = emit ((long) 0);
+ fixP = fix_new_exp (frag_now,
+ outP - frag_now->fr_literal,
+ 4,
+ &expr,
+ 0,
+ NO_RELOC);
+ /* Steve's linker relaxing hack. Mark this 32-bit relocation as
+ being in the instruction stream, specifically as part of a callx
+ instruction. */
+ fixP->fx_bsr = callx;
+ break;
+ }
+} /* memfmt() */
/*****************************************************************************
- * mema_to_memb: convert a MEMA-format opcode to a MEMB-format opcode.
- *
- * There are 2 possible MEMA formats:
- * - displacement only
- * - displacement + abase
- *
- * They are distinguished by the setting of the MEMA_ABASE bit.
- *
- **************************************************************************** */
-static void mema_to_memb(opcodeP)
- char *opcodeP; /* Where to find the opcode, in target byte order */
-{
- long opcode; /* Opcode in host byte order */
- long mode; /* Mode bits for MEMB instruction */
-
- opcode = md_chars_to_number(opcodeP, 4);
- know(!(opcode & MEMB_BIT));
-
- mode = MEMB_BIT | D_BIT;
- if (opcode & MEMA_ABASE){
- mode |= A_BIT;
- }
+ mema_to_memb: convert a MEMA-format opcode to a MEMB-format opcode.
- opcode &= 0xffffc000; /* Clear MEMA offset and mode bits */
- opcode |= mode; /* Set MEMB mode bits */
+ There are 2 possible MEMA formats:
+ - displacement only
+ - displacement + abase
- md_number_to_chars(opcodeP, opcode, 4);
-} /* mema_to_memb() */
+ They are distinguished by the setting of the MEMA_ABASE bit.
+ *************************************************************************** */
+static void
+mema_to_memb (opcodeP)
+ char *opcodeP; /* Where to find the opcode, in target byte order */
+{
+ long opcode; /* Opcode in host byte order */
+ long mode; /* Mode bits for MEMB instruction */
+
+ opcode = md_chars_to_number (opcodeP, 4);
+ know (!(opcode & MEMB_BIT));
+
+ mode = MEMB_BIT | D_BIT;
+ if (opcode & MEMA_ABASE)
+ {
+ mode |= A_BIT;
+ }
+
+ opcode &= 0xffffc000; /* Clear MEMA offset and mode bits */
+ opcode |= mode; /* Set MEMB mode bits */
+
+ md_number_to_chars (opcodeP, opcode, 4);
+} /* mema_to_memb() */
/*****************************************************************************
- * parse_expr: parse an expression
- *
- * Use base assembler's expression parser to parse an expression.
- * It, unfortunately, runs off a global which we have to save/restore
- * in order to make it work for us.
- *
- * An empty expression string is treated as an absolute 0.
- *
- * Return "segment" to which the expression evaluates.
- * Return SEG_GOOF regardless of expression evaluation if entire input
- * string is not consumed in the evaluation -- tolerate no dangling junk!
- *
- **************************************************************************** */
-static
-segT
-parse_expr(textP, expP)
- char *textP; /* Text of expression to be parsed */
- expressionS *expP; /* Where to put the results of parsing */
-{
- char *save_in; /* Save global here */
- segT seg; /* Segment to which expression evaluates */
- symbolS *symP;
-
- know(textP);
-
- if (*textP == '\0') {
- /* Treat empty string as absolute 0 */
- expP->X_add_symbol = expP->X_subtract_symbol = NULL;
- expP->X_add_number = 0;
- seg = expP->X_seg = SEG_ABSOLUTE;
-
- } else {
- save_in = input_line_pointer; /* Save global */
- input_line_pointer = textP; /* Make parser work for us */
-
- seg = expression(expP);
- if (input_line_pointer - textP != strlen(textP)) {
- /* Did not consume all of the input */
- seg = SEG_GOOF;
- }
- symP = expP->X_add_symbol;
- if (symP && (hash_find(reg_hash, S_GET_NAME(symP)))) {
- /* Register name in an expression */
- seg = SEG_GOOF;
- }
+ parse_expr: parse an expression
- input_line_pointer = save_in; /* Restore global */
+ Use base assembler's expression parser to parse an expression.
+ It, unfortunately, runs off a global which we have to save/restore
+ in order to make it work for us.
+
+ An empty expression string is treated as an absolute 0.
+
+ Sets O_illegal regardless of expression evaluation if entire input
+ string is not consumed in the evaluation -- tolerate no dangling junk!
+
+ *************************************************************************** */
+static void
+parse_expr (textP, expP)
+ char *textP; /* Text of expression to be parsed */
+ expressionS *expP; /* Where to put the results of parsing */
+{
+ char *save_in; /* Save global here */
+ symbolS *symP;
+
+ know (textP);
+
+ if (*textP == '\0')
+ {
+ /* Treat empty string as absolute 0 */
+ expP->X_add_symbol = expP->X_op_symbol = NULL;
+ expP->X_add_number = 0;
+ expP->X_op = O_constant;
+ }
+ else
+ {
+ save_in = input_line_pointer; /* Save global */
+ input_line_pointer = textP; /* Make parser work for us */
+
+ (void) expression (expP);
+ if ((size_t) (input_line_pointer - textP) != strlen (textP))
+ {
+ /* Did not consume all of the input */
+ expP->X_op = O_illegal;
+ }
+ symP = expP->X_add_symbol;
+ if (symP && (hash_find (reg_hash, S_GET_NAME (symP))))
+ {
+ /* Register name in an expression */
+ /* FIXME: this isn't much of a check any more. */
+ expP->X_op = O_illegal;
}
- return seg;
-}
+ input_line_pointer = save_in; /* Restore global */
+ }
+}
/*****************************************************************************
- * parse_ldcont:
- * Parse and replace a 'ldconst' pseudo-instruction with an appropriate
- * i80960 instruction.
- *
- * Assumes the input consists of:
- * arg[0] opcode mnemonic ('ldconst')
- * arg[1] first operand (constant)
- * arg[2] name of register to be loaded
- *
- * Replaces opcode and/or operands as appropriate.
- *
- * Returns the new number of arguments, or -1 on failure.
- *
- **************************************************************************** */
+ parse_ldcont:
+ Parse and replace a 'ldconst' pseudo-instruction with an appropriate
+ i80960 instruction.
+
+ Assumes the input consists of:
+ arg[0] opcode mnemonic ('ldconst')
+ arg[1] first operand (constant)
+ arg[2] name of register to be loaded
+
+ Replaces opcode and/or operands as appropriate.
+
+ Returns the new number of arguments, or -1 on failure.
+
+ *************************************************************************** */
static
int
-parse_ldconst(arg)
- char *arg[]; /* See above */
-{
- int n; /* Constant to be loaded */
- int shift; /* Shift count for "shlo" instruction */
- static char buf[5]; /* Literal for first operand */
- static char buf2[5]; /* Literal for second operand */
- expressionS e; /* Parsed expression */
-
-
- arg[3] = NULL; /* So we can tell at the end if it got used or not */
-
- switch(parse_expr(arg[1],&e)){
-
- case SEG_TEXT:
- case SEG_DATA:
- case SEG_BSS:
- case SEG_UNKNOWN:
- case SEG_DIFFERENCE:
- /* We're dependent on one or more symbols -- use "lda" */
- arg[0] = "lda";
- break;
-
- case SEG_ABSOLUTE:
- /* Try the following mappings:
- * ldconst 0,<reg> ->mov 0,<reg>
- * ldconst 31,<reg> ->mov 31,<reg>
- * ldconst 32,<reg> ->addo 1,31,<reg>
- * ldconst 62,<reg> ->addo 31,31,<reg>
- * ldconst 64,<reg> ->shlo 8,3,<reg>
- * ldconst -1,<reg> ->subo 1,0,<reg>
- * ldconst -31,<reg>->subo 31,0,<reg>
- *
- * anthing else becomes:
- * lda xxx,<reg>
- */
- n = offs(e);
- if ((0 <= n) && (n <= 31)){
- arg[0] = "mov";
-
- } else if ((-31 <= n) && (n <= -1)){
- arg[0] = "subo";
- arg[3] = arg[2];
- sprintf(buf, "%d", -n);
- arg[1] = buf;
- arg[2] = "0";
-
- } else if ((32 <= n) && (n <= 62)){
- arg[0] = "addo";
- arg[3] = arg[2];
- arg[1] = "31";
- sprintf(buf, "%d", n-31);
- arg[2] = buf;
-
- } else if ((shift = shift_ok(n)) != 0){
- arg[0] = "shlo";
- arg[3] = arg[2];
- sprintf(buf, "%d", shift);
- arg[1] = buf;
- sprintf(buf2, "%d", n >> shift);
- arg[2] = buf2;
-
- } else {
- arg[0] = "lda";
- }
- break;
+parse_ldconst (arg)
+ char *arg[]; /* See above */
+{
+ int n; /* Constant to be loaded */
+ int shift; /* Shift count for "shlo" instruction */
+ static char buf[5]; /* Literal for first operand */
+ static char buf2[5]; /* Literal for second operand */
+ expressionS e; /* Parsed expression */
+
+ arg[3] = NULL; /* So we can tell at the end if it got used or not */
+
+ parse_expr (arg[1], &e);
+ switch (e.X_op)
+ {
+ default:
+ /* We're dependent on one or more symbols -- use "lda" */
+ arg[0] = "lda";
+ break;
+
+ case O_constant:
+ /* Try the following mappings:
+ * ldconst 0,<reg> ->mov 0,<reg>
+ * ldconst 31,<reg> ->mov 31,<reg>
+ * ldconst 32,<reg> ->addo 1,31,<reg>
+ * ldconst 62,<reg> ->addo 31,31,<reg>
+ * ldconst 64,<reg> ->shlo 8,3,<reg>
+ * ldconst -1,<reg> ->subo 1,0,<reg>
+ * ldconst -31,<reg>->subo 31,0,<reg>
+ *
+ * anthing else becomes:
+ * lda xxx,<reg>
+ */
+ n = offs (e);
+ if ((0 <= n) && (n <= 31))
+ {
+ arg[0] = "mov";
+
+ }
+ else if ((-31 <= n) && (n <= -1))
+ {
+ arg[0] = "subo";
+ arg[3] = arg[2];
+ sprintf (buf, "%d", -n);
+ arg[1] = buf;
+ arg[2] = "0";
- default:
- as_bad("invalid constant");
- return -1;
- break;
}
- return (arg[3] == 0) ? 2: 3;
+ else if ((32 <= n) && (n <= 62))
+ {
+ arg[0] = "addo";
+ arg[3] = arg[2];
+ arg[1] = "31";
+ sprintf (buf, "%d", n - 31);
+ arg[2] = buf;
+
+ }
+ else if ((shift = shift_ok (n)) != 0)
+ {
+ arg[0] = "shlo";
+ arg[3] = arg[2];
+ sprintf (buf, "%d", shift);
+ arg[1] = buf;
+ sprintf (buf2, "%d", n >> shift);
+ arg[2] = buf2;
+
+ }
+ else
+ {
+ arg[0] = "lda";
+ }
+ break;
+
+ case O_illegal:
+ as_bad (_("invalid constant"));
+ return -1;
+ break;
+ }
+ return (arg[3] == 0) ? 2 : 3;
}
/*****************************************************************************
- * parse_memop: parse a memory operand
- *
- * This routine is based on the observation that the 4 mode bits of the
- * MEMB format, taken individually, have fairly consistent meaning:
- *
- * M3 (bit 13): 1 if displacement is present (D_BIT)
- * M2 (bit 12): 1 for MEMB instructions (MEMB_BIT)
- * M1 (bit 11): 1 if index is present (I_BIT)
- * M0 (bit 10): 1 if abase is present (A_BIT)
- *
- * So we parse the memory operand and set bits in the mode as we find
- * things. Then at the end, if we go to MEMB format, we need only set
- * the MEMB bit (M2) and our mode is built for us.
- *
- * Unfortunately, I said "fairly consistent". The exceptions:
- *
- * DBIA
- * 0100 Would seem illegal, but means "abase-only".
- *
- * 0101 Would seem to mean "abase-only" -- it means IP-relative.
- * Must be converted to 0100.
- *
- * 0110 Would seem to mean "index-only", but is reserved.
- * We turn on the D bit and provide a 0 displacement.
- *
- * The other thing to observe is that we parse from the right, peeling
- * things * off as we go: first any index spec, then any abase, then
- * the displacement.
- *
- **************************************************************************** */
-static
-void
-parse_memop(memP, argP, optype)
- memS *memP; /* Where to put the results */
- char *argP; /* Text of the operand to be parsed */
- int optype; /* MEM1, MEM2, MEM4, MEM8, MEM12, or MEM16 */
-{
- char *indexP; /* Pointer to index specification with "[]" removed */
- char *p; /* Temp char pointer */
- char iprel_flag;/* True if this is an IP-relative operand */
- int regnum; /* Register number */
- int scale; /* Scale factor: 1,2,4,8, or 16. Later converted
- * to internal format (0,1,2,3,4 respectively).
- */
- int mode; /* MEMB mode bits */
- int *intP; /* Pointer to register number */
-
- /* The following table contains the default scale factors for each
- * type of memory instruction. It is accessed using (optype-MEM1)
- * as an index -- thus it assumes the 'optype' constants are assigned
- * consecutive values, in the order they appear in this table
- */
- static int def_scale[] = {
- 1, /* MEM1 */
- 2, /* MEM2 */
- 4, /* MEM4 */
- 8, /* MEM8 */
- -1, /* MEM12 -- no valid default */
- 16 /* MEM16 */
- };
+ parse_memop: parse a memory operand
+ This routine is based on the observation that the 4 mode bits of the
+ MEMB format, taken individually, have fairly consistent meaning:
- iprel_flag = mode = 0;
-
- /* Any index present? */
- indexP = get_ispec(argP);
- if (indexP) {
- p = strchr(indexP, '*');
- if (p == NULL) {
- /* No explicit scale -- use default for this
- *instruction type.
- */
- scale = def_scale[ optype - MEM1 ];
- } else {
- *p++ = '\0'; /* Eliminate '*' */
-
- /* Now indexP->a '\0'-terminated register name,
- * and p->a scale factor.
- */
-
- if (!strcmp(p,"16")){
- scale = 16;
- } else if (strchr("1248",*p) && (p[1] == '\0')){
- scale = *p - '0';
- } else {
- scale = -1;
- }
- }
+ M3 (bit 13): 1 if displacement is present (D_BIT)
+ M2 (bit 12): 1 for MEMB instructions (MEMB_BIT)
+ M1 (bit 11): 1 if index is present (I_BIT)
+ M0 (bit 10): 1 if abase is present (A_BIT)
- regnum = get_regnum(indexP); /* Get index reg. # */
- if (!IS_RG_REG(regnum)){
- as_bad("invalid index register");
- return;
- }
+ So we parse the memory operand and set bits in the mode as we find
+ things. Then at the end, if we go to MEMB format, we need only set
+ the MEMB bit (M2) and our mode is built for us.
+
+ Unfortunately, I said "fairly consistent". The exceptions:
- /* Convert scale to its binary encoding */
- switch (scale){
- case 1: scale = 0 << 7; break;
- case 2: scale = 1 << 7; break;
- case 4: scale = 2 << 7; break;
- case 8: scale = 3 << 7; break;
- case 16: scale = 4 << 7; break;
- default: as_bad("invalid scale factor"); return;
- };
-
- memP->opcode |= scale | regnum; /* Set index bits in opcode */
- mode |= I_BIT; /* Found a valid index spec */
+ DBIA
+ 0100 Would seem illegal, but means "abase-only".
+
+ 0101 Would seem to mean "abase-only" -- it means IP-relative.
+ Must be converted to 0100.
+
+ 0110 Would seem to mean "index-only", but is reserved.
+ We turn on the D bit and provide a 0 displacement.
+
+ The other thing to observe is that we parse from the right, peeling
+ things * off as we go: first any index spec, then any abase, then
+ the displacement.
+
+ *************************************************************************** */
+static
+void
+parse_memop (memP, argP, optype)
+ memS *memP; /* Where to put the results */
+ char *argP; /* Text of the operand to be parsed */
+ int optype; /* MEM1, MEM2, MEM4, MEM8, MEM12, or MEM16 */
+{
+ char *indexP; /* Pointer to index specification with "[]" removed */
+ char *p; /* Temp char pointer */
+ char iprel_flag; /* True if this is an IP-relative operand */
+ int regnum; /* Register number */
+ /* Scale factor: 1,2,4,8, or 16. Later converted to internal format
+ (0,1,2,3,4 respectively). */
+ int scale;
+ int mode; /* MEMB mode bits */
+ int *intP; /* Pointer to register number */
+
+ /* The following table contains the default scale factors for each
+ type of memory instruction. It is accessed using (optype-MEM1)
+ as an index -- thus it assumes the 'optype' constants are
+ assigned consecutive values, in the order they appear in this
+ table. */
+ static const int def_scale[] =
+ {
+ 1, /* MEM1 */
+ 2, /* MEM2 */
+ 4, /* MEM4 */
+ 8, /* MEM8 */
+ -1, /* MEM12 -- no valid default */
+ 16 /* MEM16 */
+ };
+
+ iprel_flag = mode = 0;
+
+ /* Any index present? */
+ indexP = get_ispec (argP);
+ if (indexP)
+ {
+ p = strchr (indexP, '*');
+ if (p == NULL)
+ {
+ /* No explicit scale -- use default for this instruction
+ type and assembler mode. */
+ if (flag_mri)
+ scale = 1;
+ else
+ /* GNU960 compatibility */
+ scale = def_scale[optype - MEM1];
}
+ else
+ {
+ *p++ = '\0'; /* Eliminate '*' */
- /* Any abase (Register Indirect) specification present? */
- if ((p = strrchr(argP,'(')) != NULL) {
- /* "(" is there -- does it start a legal abase spec?
- * (If not it could be part of a displacement expression.)
- */
- intP = (int *) hash_find(areg_hash, p);
- if (intP != NULL){
- /* Got an abase here */
- regnum = *intP;
- *p = '\0'; /* discard register spec */
- if (regnum == IPREL){
- /* We have to specialcase ip-rel mode */
- iprel_flag = 1;
- } else {
- memP->opcode |= regnum << 14;
- mode |= A_BIT;
- }
- }
+ /* Now indexP->a '\0'-terminated register name,
+ * and p->a scale factor.
+ */
+
+ if (!strcmp (p, "16"))
+ {
+ scale = 16;
+ }
+ else if (strchr ("1248", *p) && (p[1] == '\0'))
+ {
+ scale = *p - '0';
+ }
+ else
+ {
+ scale = -1;
+ }
}
- /* Any expression present? */
- memP->e = argP;
- if (*argP != '\0'){
- mode |= D_BIT;
+ regnum = get_regnum (indexP); /* Get index reg. # */
+ if (!IS_RG_REG (regnum))
+ {
+ as_bad (_("invalid index register"));
+ return;
}
- /* Special-case ip-relative addressing */
- if (iprel_flag){
- if (mode & I_BIT){
- syntax();
- } else {
- memP->opcode |= 5 << 10; /* IP-relative mode */
- memP->disp = 32;
- }
- return;
+ /* Convert scale to its binary encoding */
+ switch (scale)
+ {
+ case 1:
+ scale = 0 << 7;
+ break;
+ case 2:
+ scale = 1 << 7;
+ break;
+ case 4:
+ scale = 2 << 7;
+ break;
+ case 8:
+ scale = 3 << 7;
+ break;
+ case 16:
+ scale = 4 << 7;
+ break;
+ default:
+ as_bad (_("invalid scale factor"));
+ return;
+ };
+
+ memP->opcode |= scale | regnum; /* Set index bits in opcode */
+ mode |= I_BIT; /* Found a valid index spec */
+ }
+
+ /* Any abase (Register Indirect) specification present? */
+ if ((p = strrchr (argP, '(')) != NULL)
+ {
+ /* "(" is there -- does it start a legal abase spec? If not, it
+ could be part of a displacement expression. */
+ intP = (int *) hash_find (areg_hash, p);
+ if (intP != NULL)
+ {
+ /* Got an abase here */
+ regnum = *intP;
+ *p = '\0'; /* discard register spec */
+ if (regnum == IPREL)
+ {
+ /* We have to specialcase ip-rel mode */
+ iprel_flag = 1;
+ }
+ else
+ {
+ memP->opcode |= regnum << 14;
+ mode |= A_BIT;
+ }
}
+ }
- /* Handle all other modes */
- switch (mode){
- case D_BIT | A_BIT:
- /* Go with MEMA instruction format for now (grow to MEMB later
- * if 12 bits is not enough for the displacement).
- * MEMA format has a single mode bit: set it to indicate
- * that abase is present.
- */
- memP->opcode |= MEMA_ABASE;
- memP->disp = 12;
- break;
-
- case D_BIT:
- /* Go with MEMA instruction format for now (grow to MEMB later
- * if 12 bits is not enough for the displacement).
- */
- memP->disp = 12;
- break;
-
- case A_BIT:
- /* For some reason, the bit string for this mode is not
- * consistent: it should be 0 (exclusive of the MEMB bit),
- * so we set it "by hand" here.
- */
- memP->opcode |= MEMB_BIT;
- break;
-
- case A_BIT | I_BIT:
- /* set MEMB bit in mode, and OR in mode bits */
- memP->opcode |= mode | MEMB_BIT;
- break;
-
- case I_BIT:
- /* Treat missing displacement as displacement of 0 */
- mode |= D_BIT;
- /***********************
- * Fall into next case *
- ********************** */
- case D_BIT | A_BIT | I_BIT:
- case D_BIT | I_BIT:
- /* set MEMB bit in mode, and OR in mode bits */
- memP->opcode |= mode | MEMB_BIT;
- memP->disp = 32;
- break;
+ /* Any expression present? */
+ memP->e = argP;
+ if (*argP != '\0')
+ {
+ mode |= D_BIT;
+ }
- default:
- syntax();
- break;
+ /* Special-case ip-relative addressing */
+ if (iprel_flag)
+ {
+ if (mode & I_BIT)
+ {
+ syntax ();
}
+ else
+ {
+ memP->opcode |= 5 << 10; /* IP-relative mode */
+ memP->disp = 32;
+ }
+ return;
+ }
+
+ /* Handle all other modes */
+ switch (mode)
+ {
+ case D_BIT | A_BIT:
+ /* Go with MEMA instruction format for now (grow to MEMB later
+ if 12 bits is not enough for the displacement). MEMA format
+ has a single mode bit: set it to indicate that abase is
+ present. */
+ memP->opcode |= MEMA_ABASE;
+ memP->disp = 12;
+ break;
+
+ case D_BIT:
+ /* Go with MEMA instruction format for now (grow to MEMB later
+ if 12 bits is not enough for the displacement). */
+ memP->disp = 12;
+ break;
+
+ case A_BIT:
+ /* For some reason, the bit string for this mode is not
+ consistent: it should be 0 (exclusive of the MEMB bit), so we
+ set it "by hand" here. */
+ memP->opcode |= MEMB_BIT;
+ break;
+
+ case A_BIT | I_BIT:
+ /* set MEMB bit in mode, and OR in mode bits */
+ memP->opcode |= mode | MEMB_BIT;
+ break;
+
+ case I_BIT:
+ /* Treat missing displacement as displacement of 0. */
+ mode |= D_BIT;
+ /* Fall into next case. */
+ case D_BIT | A_BIT | I_BIT:
+ case D_BIT | I_BIT:
+ /* set MEMB bit in mode, and OR in mode bits */
+ memP->opcode |= mode | MEMB_BIT;
+ memP->disp = 32;
+ break;
+
+ default:
+ syntax ();
+ break;
+ }
}
/*****************************************************************************
- * parse_po: parse machine-dependent pseudo-op
- *
- * This is a top-level routine for machine-dependent pseudo-ops. It slurps
- * up the rest of the input line, breaks out the individual arguments,
- * and dispatches them to the correct handler.
- **************************************************************************** */
+ parse_po: parse machine-dependent pseudo-op
+
+ This is a top-level routine for machine-dependent pseudo-ops. It slurps
+ up the rest of the input line, breaks out the individual arguments,
+ and dispatches them to the correct handler.
+ *************************************************************************** */
static
void
-parse_po(po_num)
- int po_num; /* Pseudo-op number: currently S_LEAFPROC or S_SYSPROC */
-{
- char *args[4]; /* Pointers operands, with no embedded whitespace.
- * arg[0] unused.
- * arg[1-3]->operands
- */
- int n_ops; /* Number of operands */
- char *p; /* Pointer to beginning of unparsed argument string */
- char eol; /* Character that indicated end of line */
-
- extern char is_end_of_line[];
-
- /* Advance input pointer to end of line. */
- p = input_line_pointer;
- while (!is_end_of_line[ *input_line_pointer ]){
- input_line_pointer++;
- }
- eol = *input_line_pointer; /* Save end-of-line char */
- *input_line_pointer = '\0'; /* Terminate argument list */
+parse_po (po_num)
+ int po_num; /* Pseudo-op number: currently S_LEAFPROC or S_SYSPROC */
+{
+ /* Pointers operands, with no embedded whitespace.
+ arg[0] unused, arg[1-3]->operands */
+ char *args[4];
+ int n_ops; /* Number of operands */
+ char *p; /* Pointer to beginning of unparsed argument string */
+ char eol; /* Character that indicated end of line */
+
+ extern char is_end_of_line[];
+
+ /* Advance input pointer to end of line. */
+ p = input_line_pointer;
+ while (!is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ input_line_pointer++;
+ }
+ eol = *input_line_pointer; /* Save end-of-line char */
+ *input_line_pointer = '\0'; /* Terminate argument list */
- /* Parse out operands */
- n_ops = get_args(p, args);
- if (n_ops == -1){
- return;
- }
+ /* Parse out operands */
+ n_ops = get_args (p, args);
+ if (n_ops == -1)
+ {
+ return;
+ }
- /* Dispatch to correct handler */
- switch(po_num){
- case S_SYSPROC: s_sysproc(n_ops, args); break;
- case S_LEAFPROC: s_leafproc(n_ops, args); break;
- default: BAD_CASE(po_num); break;
- }
+ /* Dispatch to correct handler */
+ switch (po_num)
+ {
+ case S_SYSPROC:
+ s_sysproc (n_ops, args);
+ break;
+ case S_LEAFPROC:
+ s_leafproc (n_ops, args);
+ break;
+ default:
+ BAD_CASE (po_num);
+ break;
+ }
- /* Restore eol, so line numbers get updated correctly. Base assembler
- * assumes we leave input pointer pointing at char following the eol.
- */
- *input_line_pointer++ = eol;
+ /* Restore eol, so line numbers get updated correctly. Base
+ assembler assumes we leave input pointer pointing at char
+ following the eol. */
+ *input_line_pointer++ = eol;
}
/*****************************************************************************
- * parse_regop: parse a register operand.
- *
- * In case of illegal operand, issue a message and return some valid
- * information so instruction processing can continue.
- **************************************************************************** */
+ parse_regop: parse a register operand.
+
+ In case of illegal operand, issue a message and return some valid
+ information so instruction processing can continue.
+ *************************************************************************** */
static
void
-parse_regop(regopP, optext, opdesc)
- struct regop *regopP; /* Where to put description of register operand */
- char *optext; /* Text of operand */
- char opdesc; /* Descriptor byte: what's legal for this operand */
-{
- int n; /* Register number */
- expressionS e; /* Parsed expression */
-
- /* See if operand is a register */
- n = get_regnum(optext);
- if (n >= 0){
- if (IS_RG_REG(n)){
- /* global or local register */
- if (!REG_ALIGN(opdesc,n)){
- as_bad("unaligned register");
- }
- regopP->n = n;
- regopP->mode = 0;
- regopP->special = 0;
- return;
- } else if (IS_FP_REG(n) && FP_OK(opdesc)){
- /* Floating point register, and it's allowed */
- regopP->n = n - FP0;
- regopP->mode = 1;
- regopP->special = 0;
- return;
- } else if (IS_SF_REG(n) && SFR_OK(opdesc)){
- /* Special-function register, and it's allowed */
- regopP->n = n - SF0;
- regopP->mode = 0;
- regopP->special = 1;
- if (!targ_has_sfr(regopP->n)){
- as_bad("no such sfr in this architecture");
- }
- return;
- }
- } else if (LIT_OK(opdesc)){
- /*
- * How about a literal?
- */
- regopP->mode = 1;
- regopP->special = 0;
- if (FP_OK(opdesc)){ /* floating point literal acceptable */
- /* Skip over 0f, 0d, or 0e prefix */
- if ( (optext[0] == '0')
- && (optext[1] >= 'd')
- && (optext[1] <= 'f') ){
- optext += 2;
- }
-
- if (!strcmp(optext,"0.0") || !strcmp(optext,"0") ){
- regopP->n = 0x10;
- return;
- }
- if (!strcmp(optext,"1.0") || !strcmp(optext,"1") ){
- regopP->n = 0x16;
- return;
- }
-
- } else { /* fixed point literal acceptable */
- if ((parse_expr(optext,&e) != SEG_ABSOLUTE)
- || (offs(e) < 0) || (offs(e) > 31)){
- as_bad("illegal literal");
- offs(e) = 0;
- }
- regopP->n = offs(e);
- return;
- }
+parse_regop (regopP, optext, opdesc)
+ struct regop *regopP; /* Where to put description of register operand */
+ char *optext; /* Text of operand */
+ char opdesc; /* Descriptor byte: what's legal for this operand */
+{
+ int n; /* Register number */
+ expressionS e; /* Parsed expression */
+
+ /* See if operand is a register */
+ n = get_regnum (optext);
+ if (n >= 0)
+ {
+ if (IS_RG_REG (n))
+ {
+ /* global or local register */
+ if (!REG_ALIGN (opdesc, n))
+ {
+ as_bad (_("unaligned register"));
+ }
+ regopP->n = n;
+ regopP->mode = 0;
+ regopP->special = 0;
+ return;
+ }
+ else if (IS_FP_REG (n) && FP_OK (opdesc))
+ {
+ /* Floating point register, and it's allowed */
+ regopP->n = n - FP0;
+ regopP->mode = 1;
+ regopP->special = 0;
+ return;
+ }
+ else if (IS_SF_REG (n) && SFR_OK (opdesc))
+ {
+ /* Special-function register, and it's allowed */
+ regopP->n = n - SF0;
+ regopP->mode = 0;
+ regopP->special = 1;
+ if (!targ_has_sfr (regopP->n))
+ {
+ as_bad (_("no such sfr in this architecture"));
+ }
+ return;
+ }
+ }
+ else if (LIT_OK (opdesc))
+ {
+ /* How about a literal? */
+ regopP->mode = 1;
+ regopP->special = 0;
+ if (FP_OK (opdesc))
+ { /* floating point literal acceptable */
+ /* Skip over 0f, 0d, or 0e prefix */
+ if ((optext[0] == '0')
+ && (optext[1] >= 'd')
+ && (optext[1] <= 'f'))
+ {
+ optext += 2;
+ }
+
+ if (!strcmp (optext, "0.0") || !strcmp (optext, "0"))
+ {
+ regopP->n = 0x10;
+ return;
+ }
+ if (!strcmp (optext, "1.0") || !strcmp (optext, "1"))
+ {
+ regopP->n = 0x16;
+ return;
+ }
+
+ }
+ else
+ { /* fixed point literal acceptable */
+ parse_expr (optext, &e);
+ if (e.X_op != O_constant
+ || (offs (e) < 0) || (offs (e) > 31))
+ {
+ as_bad (_("illegal literal"));
+ offs (e) = 0;
+ }
+ regopP->n = offs (e);
+ return;
}
+ }
- /* Nothing worked */
- syntax();
- regopP->mode = 0; /* Register r0 is always a good one */
- regopP->n = 0;
- regopP->special = 0;
-} /* parse_regop() */
+ /* Nothing worked */
+ syntax ();
+ regopP->mode = 0; /* Register r0 is always a good one */
+ regopP->n = 0;
+ regopP->special = 0;
+} /* parse_regop() */
/*****************************************************************************
- * reg_fmt: generate a REG-format instruction
- *
- **************************************************************************** */
-static void reg_fmt(args, oP)
- char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
- struct i960_opcode *oP; /* Pointer to description of instruction */
-{
- long instr; /* Binary to be output */
- struct regop regop; /* Description of register operand */
- int n_ops; /* Number of operands */
-
-
- instr = oP->opcode;
- n_ops = oP->num_ops;
-
- if (n_ops >= 1){
- parse_regop(®op, args[1], oP->operand[0]);
-
- if ((n_ops == 1) && !(instr & M3)){
- /* 1-operand instruction in which the dst field should
- * be used (instead of src1).
- */
- regop.n <<= 19;
- if (regop.special){
- regop.mode = regop.special;
- }
- regop.mode <<= 13;
- regop.special = 0;
- } else {
- /* regop.n goes in bit 0, needs no shifting */
- regop.mode <<= 11;
- regop.special <<= 5;
- }
- instr |= regop.n | regop.mode | regop.special;
+ reg_fmt: generate a REG-format instruction
+
+ *************************************************************************** */
+static void
+reg_fmt (args, oP)
+ char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
+ struct i960_opcode *oP; /* Pointer to description of instruction */
+{
+ long instr; /* Binary to be output */
+ struct regop regop; /* Description of register operand */
+ int n_ops; /* Number of operands */
+
+ instr = oP->opcode;
+ n_ops = oP->num_ops;
+
+ if (n_ops >= 1)
+ {
+ parse_regop (®op, args[1], oP->operand[0]);
+
+ if ((n_ops == 1) && !(instr & M3))
+ {
+ /* 1-operand instruction in which the dst field should
+ * be used (instead of src1).
+ */
+ regop.n <<= 19;
+ if (regop.special)
+ {
+ regop.mode = regop.special;
+ }
+ regop.mode <<= 13;
+ regop.special = 0;
}
+ else
+ {
+ /* regop.n goes in bit 0, needs no shifting */
+ regop.mode <<= 11;
+ regop.special <<= 5;
+ }
+ instr |= regop.n | regop.mode | regop.special;
+ }
- if (n_ops >= 2) {
- parse_regop(®op, args[2], oP->operand[1]);
-
- if ((n_ops == 2) && !(instr & M3)){
- /* 2-operand instruction in which the dst field should
- * be used instead of src2).
- */
- regop.n <<= 19;
- if (regop.special){
- regop.mode = regop.special;
- }
- regop.mode <<= 13;
- regop.special = 0;
- } else {
- regop.n <<= 14;
- regop.mode <<= 12;
- regop.special <<= 6;
- }
- instr |= regop.n | regop.mode | regop.special;
+ if (n_ops >= 2)
+ {
+ parse_regop (®op, args[2], oP->operand[1]);
+
+ if ((n_ops == 2) && !(instr & M3))
+ {
+ /* 2-operand instruction in which the dst field should
+ * be used instead of src2).
+ */
+ regop.n <<= 19;
+ if (regop.special)
+ {
+ regop.mode = regop.special;
+ }
+ regop.mode <<= 13;
+ regop.special = 0;
}
- if (n_ops == 3){
- parse_regop(®op, args[3], oP->operand[2]);
- if (regop.special){
- regop.mode = regop.special;
- }
- instr |= (regop.n <<= 19) | (regop.mode <<= 13);
+ else
+ {
+ regop.n <<= 14;
+ regop.mode <<= 12;
+ regop.special <<= 6;
+ }
+ instr |= regop.n | regop.mode | regop.special;
+ }
+ if (n_ops == 3)
+ {
+ parse_regop (®op, args[3], oP->operand[2]);
+ if (regop.special)
+ {
+ regop.mode = regop.special;
}
- emit(instr);
+ instr |= (regop.n <<= 19) | (regop.mode <<= 13);
+ }
+ emit (instr);
}
-
/*****************************************************************************
- * relax_cobr:
- * Replace cobr instruction in a code fragment with equivalent branch and
- * compare instructions, so it can reach beyond a 13-bit displacement.
- * Set up an address fix/relocation for the new branch instruction.
- *
- **************************************************************************** */
-
-/* This "conditional jump" table maps cobr instructions into equivalent
- * compare and branch opcodes.
- */
-static
-struct {
- long compare;
- long branch;
-} coj[] = { /* COBR OPCODE: */
- CHKBIT, BNO, /* 0x30 - bbc */
- CMPO, BG, /* 0x31 - cmpobg */
- CMPO, BE, /* 0x32 - cmpobe */
- CMPO, BGE, /* 0x33 - cmpobge */
- CMPO, BL, /* 0x34 - cmpobl */
- CMPO, BNE, /* 0x35 - cmpobne */
- CMPO, BLE, /* 0x36 - cmpoble */
- CHKBIT, BO, /* 0x37 - bbs */
- CMPI, BNO, /* 0x38 - cmpibno */
- CMPI, BG, /* 0x39 - cmpibg */
- CMPI, BE, /* 0x3a - cmpibe */
- CMPI, BGE, /* 0x3b - cmpibge */
- CMPI, BL, /* 0x3c - cmpibl */
- CMPI, BNE, /* 0x3d - cmpibne */
- CMPI, BLE, /* 0x3e - cmpible */
- CMPI, BO, /* 0x3f - cmpibo */
+ relax_cobr:
+ Replace cobr instruction in a code fragment with equivalent branch and
+ compare instructions, so it can reach beyond a 13-bit displacement.
+ Set up an address fix/relocation for the new branch instruction.
+
+ *************************************************************************** */
+
+/* This "conditional jump" table maps cobr instructions into
+ equivalent compare and branch opcodes. */
+static const
+struct
+{
+ long compare;
+ long branch;
+}
+
+coj[] =
+{ /* COBR OPCODE: */
+ { CHKBIT, BNO }, /* 0x30 - bbc */
+ { CMPO, BG }, /* 0x31 - cmpobg */
+ { CMPO, BE }, /* 0x32 - cmpobe */
+ { CMPO, BGE }, /* 0x33 - cmpobge */
+ { CMPO, BL }, /* 0x34 - cmpobl */
+ { CMPO, BNE }, /* 0x35 - cmpobne */
+ { CMPO, BLE }, /* 0x36 - cmpoble */
+ { CHKBIT, BO }, /* 0x37 - bbs */
+ { CMPI, BNO }, /* 0x38 - cmpibno */
+ { CMPI, BG }, /* 0x39 - cmpibg */
+ { CMPI, BE }, /* 0x3a - cmpibe */
+ { CMPI, BGE }, /* 0x3b - cmpibge */
+ { CMPI, BL }, /* 0x3c - cmpibl */
+ { CMPI, BNE }, /* 0x3d - cmpibne */
+ { CMPI, BLE }, /* 0x3e - cmpible */
+ { CMPI, BO }, /* 0x3f - cmpibo */
};
static
void
-relax_cobr(fragP)
- register fragS *fragP; /* fragP->fr_opcode is assumed to point to
+relax_cobr (fragP)
+ register fragS *fragP; /* fragP->fr_opcode is assumed to point to
* the cobr instruction, which comes at the
* end of the code fragment.
*/
{
- int opcode, src1, src2, m1, s2;
- /* Bit fields from cobr instruction */
- long bp_bits; /* Branch prediction bits from cobr instruction */
- long instr; /* A single i960 instruction */
- char *iP; /*->instruction to be replaced */
- fixS *fixP; /* Relocation that can be done at assembly time */
-
- /* PICK UP & PARSE COBR INSTRUCTION */
- iP = fragP->fr_opcode;
- instr = md_chars_to_number(iP, 4);
- opcode = ((instr >> 24) & 0xff) - 0x30; /* "-0x30" for table index */
- src1 = (instr >> 19) & 0x1f;
- m1 = (instr >> 13) & 1;
- s2 = instr & 1;
- src2 = (instr >> 14) & 0x1f;
- bp_bits= instr & BP_MASK;
-
- /* GENERATE AND OUTPUT COMPARE INSTRUCTION */
- instr = coj[opcode].compare
- | src1 | (m1 << 11) | (s2 << 6) | (src2 << 14);
- md_number_to_chars(iP, instr, 4);
-
- /* OUTPUT BRANCH INSTRUCTION */
- md_number_to_chars(iP+4, coj[opcode].branch | bp_bits, 4);
-
- /* SET UP ADDRESS FIXUP/RELOCATION */
- fixP = fix_new(fragP,
- iP+4 - fragP->fr_literal,
- 4,
- fragP->fr_symbol,
- 0,
- fragP->fr_offset,
- 1,
- 0);
-
- fixP->fx_bit_fixP = (bit_fixS *) 24; /* Store size of bit field */
-
- fragP->fr_fix += 4;
- frag_wane(fragP);
+ int opcode, src1, src2, m1, s2;
+ /* Bit fields from cobr instruction */
+ long bp_bits; /* Branch prediction bits from cobr instruction */
+ long instr; /* A single i960 instruction */
+ /* ->instruction to be replaced */
+ char *iP;
+ fixS *fixP; /* Relocation that can be done at assembly time */
+
+ /* PICK UP & PARSE COBR INSTRUCTION */
+ iP = fragP->fr_opcode;
+ instr = md_chars_to_number (iP, 4);
+ opcode = ((instr >> 24) & 0xff) - 0x30; /* "-0x30" for table index */
+ src1 = (instr >> 19) & 0x1f;
+ m1 = (instr >> 13) & 1;
+ s2 = instr & 1;
+ src2 = (instr >> 14) & 0x1f;
+ bp_bits = instr & BP_MASK;
+
+ /* GENERATE AND OUTPUT COMPARE INSTRUCTION */
+ instr = coj[opcode].compare
+ | src1 | (m1 << 11) | (s2 << 6) | (src2 << 14);
+ md_number_to_chars (iP, instr, 4);
+
+ /* OUTPUT BRANCH INSTRUCTION */
+ md_number_to_chars (iP + 4, coj[opcode].branch | bp_bits, 4);
+
+ /* SET UP ADDRESS FIXUP/RELOCATION */
+ fixP = fix_new (fragP,
+ iP + 4 - fragP->fr_literal,
+ 4,
+ fragP->fr_symbol,
+ fragP->fr_offset,
+ 1,
+ NO_RELOC);
+
+ fixP->fx_bit_fixP = (bit_fixS *) 24; /* Store size of bit field */
+
+ fragP->fr_fix += 4;
+ frag_wane (fragP);
}
-
/*****************************************************************************
- * reloc_callj: Relocate a 'callj' instruction
- *
- * This is a "non-(GNU)-standard" machine-dependent hook. The base
- * assembler calls it when it decides it can relocate an address at
- * assembly time instead of emitting a relocation directive.
- *
- * Check to see if the relocation involves a 'callj' instruction to a:
- * sysproc: Replace the default 'call' instruction with a 'calls'
- * leafproc: Replace the default 'call' instruction with a 'bal'.
- * other proc: Do nothing.
- *
- * See b.out.h for details on the 'n_other' field in a symbol structure.
- *
- * IMPORTANT!:
- * Assumes the caller has already figured out, in the case of a leafproc,
- * to use the 'bal' entry point, and has substituted that symbol into the
- * passed fixup structure.
- *
- **************************************************************************** */
-void reloc_callj(fixP)
-fixS *fixP; /* Relocation that can be done at assembly time */
-{
- char *where; /*->the binary for the instruction being relocated */
-
- if (!fixP->fx_callj) {
- return;
- } /* This wasn't a callj instruction in the first place */
-
- where = fixP->fx_frag->fr_literal + fixP->fx_where;
-
- if (TC_S_IS_SYSPROC(fixP->fx_addsy)) {
- /* Symbol is a .sysproc: replace 'call' with 'calls'.
- * System procedure number is (other-1).
- */
- md_number_to_chars(where, CALLS|TC_S_GET_SYSPROC(fixP->fx_addsy), 4);
-
- /* Nothing else needs to be done for this instruction.
- * Make sure 'md_number_to_field()' will perform a no-op.
- */
- fixP->fx_bit_fixP = (bit_fixS *) 1;
-
- } else if (TC_S_IS_CALLNAME(fixP->fx_addsy)) {
- /* Should not happen: see block comment above */
- as_fatal("Trying to 'bal' to %s", S_GET_NAME(fixP->fx_addsy));
-
- } else if (TC_S_IS_BALNAME(fixP->fx_addsy)) {
- /* Replace 'call' with 'bal'; both instructions have
- * the same format, so calling code should complete
- * relocation as if nothing happened here.
- */
- md_number_to_chars(where, BAL, 4);
- } else if (TC_S_IS_BADPROC(fixP->fx_addsy)) {
- as_bad("Looks like a proc, but can't tell what kind.\n");
- } /* switch on proc type */
-
- /* else Symbol is neither a sysproc nor a leafproc */
-
- return;
-} /* reloc_callj() */
+ reloc_callj: Relocate a 'callj' instruction
+
+ This is a "non-(GNU)-standard" machine-dependent hook. The base
+ assembler calls it when it decides it can relocate an address at
+ assembly time instead of emitting a relocation directive.
+
+ Check to see if the relocation involves a 'callj' instruction to a:
+ sysproc: Replace the default 'call' instruction with a 'calls'
+ leafproc: Replace the default 'call' instruction with a 'bal'.
+ other proc: Do nothing.
+
+ See b.out.h for details on the 'n_other' field in a symbol structure.
+
+ IMPORTANT!:
+ Assumes the caller has already figured out, in the case of a leafproc,
+ to use the 'bal' entry point, and has substituted that symbol into the
+ passed fixup structure.
+
+ *************************************************************************** */
+void
+reloc_callj (fixP)
+ /* Relocation that can be done at assembly time */
+ fixS *fixP;
+{
+ /* Points to the binary for the instruction being relocated. */
+ char *where;
+
+ if (!fixP->fx_tcbit)
+ {
+ /* This wasn't a callj instruction in the first place */
+ return;
+ }
+
+ where = fixP->fx_frag->fr_literal + fixP->fx_where;
+
+ if (TC_S_IS_SYSPROC (fixP->fx_addsy))
+ {
+ /* Symbol is a .sysproc: replace 'call' with 'calls'. System
+ procedure number is (other-1). */
+ md_number_to_chars (where, CALLS | TC_S_GET_SYSPROC (fixP->fx_addsy), 4);
+ /* Nothing else needs to be done for this instruction. Make
+ sure 'md_number_to_field()' will perform a no-op. */
+ fixP->fx_bit_fixP = (bit_fixS *) 1;
+
+ }
+ else if (TC_S_IS_CALLNAME (fixP->fx_addsy))
+ {
+ /* Should not happen: see block comment above */
+ as_fatal (_("Trying to 'bal' to %s"), S_GET_NAME (fixP->fx_addsy));
+ }
+ else if (TC_S_IS_BALNAME (fixP->fx_addsy))
+ {
+ /* Replace 'call' with 'bal'; both instructions have the same
+ format, so calling code should complete relocation as if
+ nothing happened here. */
+ md_number_to_chars (where, BAL, 4);
+ }
+ else if (TC_S_IS_BADPROC (fixP->fx_addsy))
+ {
+ as_bad (_("Looks like a proc, but can't tell what kind.\n"));
+ } /* switch on proc type */
+
+ /* else Symbol is neither a sysproc nor a leafproc */
+}
/*****************************************************************************
- * s_leafproc: process .leafproc pseudo-op
- *
- * .leafproc takes two arguments, the second one is optional:
- * arg[1]: name of 'call' entry point to leaf procedure
- * arg[2]: name of 'bal' entry point to leaf procedure
- *
- * If the two arguments are identical, or if the second one is missing,
- * the first argument is taken to be the 'bal' entry point.
- *
- * If there are 2 distinct arguments, we must make sure that the 'bal'
- * entry point immediately follows the 'call' entry point in the linked
- * list of symbols.
- *
- **************************************************************************** */
-static void s_leafproc(n_ops, args)
-int n_ops; /* Number of operands */
-char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
-{
- symbolS *callP; /* Pointer to leafproc 'call' entry point symbol */
- symbolS *balP; /* Pointer to leafproc 'bal' entry point symbol */
-
- if ((n_ops != 1) && (n_ops != 2)) {
- as_bad("should have 1 or 2 operands");
- return;
- } /* Check number of arguments */
-
- /* Find or create symbol for 'call' entry point. */
- callP = symbol_find_or_make(args[1]);
-
- if (TC_S_IS_CALLNAME(callP)) {
- as_warn("Redefining leafproc %s", S_GET_NAME(callP));
- } /* is leafproc */
-
- /* If that was the only argument, use it as the 'bal' entry point.
- * Otherwise, mark it as the 'call' entry point and find or create
- * another symbol for the 'bal' entry point.
- */
- if ((n_ops == 1) || !strcmp(args[1],args[2])) {
- TC_S_FORCE_TO_BALNAME(callP);
-
- } else {
- TC_S_FORCE_TO_CALLNAME(callP);
-
- balP = symbol_find_or_make(args[2]);
- if (TC_S_IS_CALLNAME(balP)) {
- as_warn("Redefining leafproc %s", S_GET_NAME(balP));
- }
- TC_S_FORCE_TO_BALNAME(balP);
+ s_leafproc: process .leafproc pseudo-op
- tc_set_bal_of_call(callP, balP);
- } /* if only one arg, or the args are the same */
+ .leafproc takes two arguments, the second one is optional:
+ arg[1]: name of 'call' entry point to leaf procedure
+ arg[2]: name of 'bal' entry point to leaf procedure
- return;
-} /* s_leafproc() */
+ If the two arguments are identical, or if the second one is missing,
+ the first argument is taken to be the 'bal' entry point.
+ If there are 2 distinct arguments, we must make sure that the 'bal'
+ entry point immediately follows the 'call' entry point in the linked
+ list of symbols.
-/*
- * s_sysproc: process .sysproc pseudo-op
- *
- * .sysproc takes two arguments:
- * arg[1]: name of entry point to system procedure
- * arg[2]: 'entry_num' (index) of system procedure in the range
- * [0,31] inclusive.
- *
- * For [ab].out, we store the 'entrynum' in the 'n_other' field of
- * the symbol. Since that entry is normally 0, we bias 'entrynum'
- * by adding 1 to it. It must be unbiased before it is used.
- */
-static void s_sysproc(n_ops, args)
-int n_ops; /* Number of operands */
-char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
-{
- expressionS exp;
- symbolS *symP;
-
- if (n_ops != 2) {
- as_bad("should have two operands");
- return;
- } /* bad arg count */
-
- /* Parse "entry_num" argument and check it for validity. */
- if ((parse_expr(args[2],&exp) != SEG_ABSOLUTE)
- || (offs(exp) < 0)
- || (offs(exp) > 31)) {
- as_bad("'entry_num' must be absolute number in [0,31]");
- return;
+ *************************************************************************** */
+static void
+s_leafproc (n_ops, args)
+ int n_ops; /* Number of operands */
+ char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
+{
+ symbolS *callP; /* Pointer to leafproc 'call' entry point symbol */
+ symbolS *balP; /* Pointer to leafproc 'bal' entry point symbol */
+
+ if ((n_ops != 1) && (n_ops != 2))
+ {
+ as_bad (_("should have 1 or 2 operands"));
+ return;
+ } /* Check number of arguments */
+
+ /* Find or create symbol for 'call' entry point. */
+ callP = symbol_find_or_make (args[1]);
+
+ if (TC_S_IS_CALLNAME (callP))
+ {
+ as_warn (_("Redefining leafproc %s"), S_GET_NAME (callP));
+ } /* is leafproc */
+
+ /* If that was the only argument, use it as the 'bal' entry point.
+ * Otherwise, mark it as the 'call' entry point and find or create
+ * another symbol for the 'bal' entry point.
+ */
+ if ((n_ops == 1) || !strcmp (args[1], args[2]))
+ {
+ TC_S_FORCE_TO_BALNAME (callP);
+
+ }
+ else
+ {
+ TC_S_FORCE_TO_CALLNAME (callP);
+
+ balP = symbol_find_or_make (args[2]);
+ if (TC_S_IS_CALLNAME (balP))
+ {
+ as_warn (_("Redefining leafproc %s"), S_GET_NAME (balP));
}
+ TC_S_FORCE_TO_BALNAME (balP);
- /* Find/make symbol and stick entry number (biased by +1) into it */
- symP = symbol_find_or_make(args[1]);
+#ifndef OBJ_ELF
+ tc_set_bal_of_call (callP, balP);
+#endif
+ } /* if only one arg, or the args are the same */
+}
- if (TC_S_IS_SYSPROC(symP)) {
- as_warn("Redefining entrynum for sysproc %s", S_GET_NAME(symP));
- } /* redefining */
+/*
+ s_sysproc: process .sysproc pseudo-op
- TC_S_SET_SYSPROC(symP, offs(exp)); /* encode entry number */
- TC_S_FORCE_TO_SYSPROC(symP);
+ .sysproc takes two arguments:
+ arg[1]: name of entry point to system procedure
+ arg[2]: 'entry_num' (index) of system procedure in the range
+ [0,31] inclusive.
- return;
-} /* s_sysproc() */
+ For [ab].out, we store the 'entrynum' in the 'n_other' field of
+ the symbol. Since that entry is normally 0, we bias 'entrynum'
+ by adding 1 to it. It must be unbiased before it is used. */
+static void
+s_sysproc (n_ops, args)
+ int n_ops; /* Number of operands */
+ char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
+{
+ expressionS exp;
+ symbolS *symP;
+ if (n_ops != 2)
+ {
+ as_bad (_("should have two operands"));
+ return;
+ } /* bad arg count */
+
+ /* Parse "entry_num" argument and check it for validity. */
+ parse_expr (args[2], &exp);
+ if (exp.X_op != O_constant
+ || (offs (exp) < 0)
+ || (offs (exp) > 31))
+ {
+ as_bad (_("'entry_num' must be absolute number in [0,31]"));
+ return;
+ }
+
+ /* Find/make symbol and stick entry number (biased by +1) into it */
+ symP = symbol_find_or_make (args[1]);
+
+ if (TC_S_IS_SYSPROC (symP))
+ {
+ as_warn (_("Redefining entrynum for sysproc %s"), S_GET_NAME (symP));
+ } /* redefining */
+
+ TC_S_SET_SYSPROC (symP, offs (exp)); /* encode entry number */
+ TC_S_FORCE_TO_SYSPROC (symP);
+}
/*****************************************************************************
- * shift_ok:
- * Determine if a "shlo" instruction can be used to implement a "ldconst".
- * This means that some number X < 32 can be shifted left to produce the
- * constant of interest.
- *
- * Return the shift count, or 0 if we can't do it.
- * Caller calculates X by shifting original constant right 'shift' places.
- *
- **************************************************************************** */
+ shift_ok:
+ Determine if a "shlo" instruction can be used to implement a "ldconst".
+ This means that some number X < 32 can be shifted left to produce the
+ constant of interest.
+
+ Return the shift count, or 0 if we can't do it.
+ Caller calculates X by shifting original constant right 'shift' places.
+
+ *************************************************************************** */
static
int
-shift_ok(n)
- int n; /* The constant of interest */
+shift_ok (n)
+ int n; /* The constant of interest */
{
- int shift; /* The shift count */
+ int shift; /* The shift count */
- if (n <= 0){
- /* Can't do it for negative numbers */
- return 0;
- }
+ if (n <= 0)
+ {
+ /* Can't do it for negative numbers */
+ return 0;
+ }
- /* Shift 'n' right until a 1 is about to be lost */
- for (shift = 0; (n & 1) == 0; shift++){
- n >>= 1;
- }
+ /* Shift 'n' right until a 1 is about to be lost */
+ for (shift = 0; (n & 1) == 0; shift++)
+ {
+ n >>= 1;
+ }
- if (n >= 32){
- return 0;
- }
- return shift;
+ if (n >= 32)
+ {
+ return 0;
+ }
+ return shift;
}
+/* syntax: issue syntax error */
-/*****************************************************************************
- * syntax: issue syntax error
- *
- **************************************************************************** */
-static void syntax() {
- as_bad("syntax error");
-} /* syntax() */
+static void
+syntax ()
+{
+ as_bad (_("syntax error"));
+} /* syntax() */
+/* targ_has_sfr:
+
+ Return TRUE iff the target architecture supports the specified
+ special-function register (sfr). */
-/*****************************************************************************
- * targ_has_sfr:
- * Return TRUE iff the target architecture supports the specified
- * special-function register (sfr).
- *
- **************************************************************************** */
static
int
-targ_has_sfr(n)
- int n; /* Number (0-31) of sfr */
-{
- switch (architecture){
- case ARCH_KA:
- case ARCH_KB:
- case ARCH_MC:
- return 0;
- case ARCH_CA:
- default:
- return ((0<=n) && (n<=2));
- }
+targ_has_sfr (n)
+ int n; /* Number (0-31) of sfr */
+{
+ switch (architecture)
+ {
+ case ARCH_KA:
+ case ARCH_KB:
+ case ARCH_MC:
+ case ARCH_JX:
+ return 0;
+ case ARCH_HX:
+ return ((0 <= n) && (n <= 4));
+ case ARCH_CA:
+ default:
+ return ((0 <= n) && (n <= 2));
+ }
}
+/* targ_has_iclass:
-/*****************************************************************************
- * targ_has_iclass:
- * Return TRUE iff the target architecture supports the indicated
- * class of instructions.
- *
- **************************************************************************** */
+ Return TRUE iff the target architecture supports the indicated
+ class of instructions. */
static
int
-targ_has_iclass(ic)
- int ic; /* Instruction class; one of:
- * I_BASE, I_CX, I_DEC, I_KX, I_FP, I_MIL, I_CASIM
- */
-{
- iclasses_seen |= ic;
- switch (architecture){
- case ARCH_KA: return ic & (I_BASE | I_KX);
- case ARCH_KB: return ic & (I_BASE | I_KX | I_FP | I_DEC);
- case ARCH_MC: return ic & (I_BASE | I_KX | I_FP | I_DEC | I_MIL);
- case ARCH_CA: return ic & (I_BASE | I_CX | I_CASIM);
- default:
- if ((iclasses_seen & (I_KX|I_FP|I_DEC|I_MIL))
- && (iclasses_seen & I_CX)){
- as_warn("architecture of opcode conflicts with that of earlier instruction(s)");
- iclasses_seen &= ~ic;
- }
- return 1;
+targ_has_iclass (ic)
+ /* Instruction class; one of:
+ I_BASE, I_CX, I_DEC, I_KX, I_FP, I_MIL, I_CASIM, I_CX2, I_HX, I_HX2
+ */
+ int ic;
+{
+ iclasses_seen |= ic;
+ switch (architecture)
+ {
+ case ARCH_KA:
+ return ic & (I_BASE | I_KX);
+ case ARCH_KB:
+ return ic & (I_BASE | I_KX | I_FP | I_DEC);
+ case ARCH_MC:
+ return ic & (I_BASE | I_KX | I_FP | I_DEC | I_MIL);
+ case ARCH_CA:
+ return ic & (I_BASE | I_CX | I_CX2 | I_CASIM);
+ case ARCH_JX:
+ return ic & (I_BASE | I_CX2 | I_JX);
+ case ARCH_HX:
+ return ic & (I_BASE | I_CX2 | I_JX | I_HX);
+ default:
+ if ((iclasses_seen & (I_KX | I_FP | I_DEC | I_MIL))
+ && (iclasses_seen & (I_CX | I_CX2)))
+ {
+ as_warn (_("architecture of opcode conflicts with that of earlier instruction(s)"));
+ iclasses_seen &= ~ic;
}
+ return 1;
+ }
}
+/* Handle the MRI .endian pseudo-op. */
-/* Parse an operand that is machine-specific.
- We just return without modifying the expression if we have nothing
- to do. */
-
-/* ARGSUSED */
-void
-md_operand (expressionP)
- expressionS *expressionP;
+static void
+s_endian (ignore)
+ int ignore;
{
+ char *name;
+ char c;
+
+ name = input_line_pointer;
+ c = get_symbol_end ();
+ if (strcasecmp (name, "little") == 0)
+ ;
+ else if (strcasecmp (name, "big") == 0)
+ as_bad (_("big endian mode is not supported"));
+ else
+ as_warn (_("ignoring unrecognized .endian type `%s'"), name);
+
+ *input_line_pointer = c;
+
+ demand_empty_rest_of_line ();
}
-/* We have no need to default values of symbols. */
+/* We have no need to default values of symbols. */
-/* ARGSUSED */
-symbolS *md_undefined_symbol(name)
-char *name;
+symbolS *
+md_undefined_symbol (name)
+ char *name;
{
- return 0;
-} /* md_undefined_symbol() */
+ return 0;
+}
/* Exactly what point is a PC-relative offset relative TO?
On the i960, they're relative to the address of the instruction,
- which we have set up as the address of the fixup too. */
+ which we have set up as the address of the fixup too. */
long
md_pcrel_from (fixP)
fixS *fixP;
return fixP->fx_where + fixP->fx_frag->fr_address;
}
+#ifdef BFD_ASSEMBLER
+int
+md_apply_fix (fixP, valp)
+ fixS *fixP;
+ valueT *valp;
+#else
void
-md_apply_fix(fixP, val)
- fixS *fixP;
- long val;
-{
- char *place = fixP->fx_where + fixP->fx_frag->fr_literal;
-
- if (!fixP->fx_bit_fixP) {
-
- switch (fixP->fx_im_disp) {
- case 0:
- fixP->fx_addnumber = val;
- md_number_to_imm(place, val, fixP->fx_size, fixP);
- break;
- case 1:
- md_number_to_disp(place,
- fixP->fx_pcrel ? val + fixP->fx_pcrel_adjust : val,
- fixP->fx_size);
- break;
- case 2: /* fix requested for .long .word etc */
- md_number_to_chars(place, val, fixP->fx_size);
- break;
- default:
- as_fatal("Internal error in md_apply_fix() in file \"%s\"", __FILE__);
- } /* OVE: maybe one ought to put _imm _disp _chars in one md-func */
- } else {
- md_number_to_field(place, val, fixP->fx_bit_fixP);
- }
+md_apply_fix (fixP, val)
+ fixS *fixP;
+ long val;
+#endif
+{
+#ifdef BFD_ASSEMBLER
+ long val = *valp;
+#endif
+ char *place = fixP->fx_where + fixP->fx_frag->fr_literal;
+
+ if (!fixP->fx_bit_fixP)
+ {
+#ifndef BFD_ASSEMBLER
+ /* For callx, we always want to write out zero, and emit a
+ symbolic relocation. */
+ if (fixP->fx_bsr)
+ val = 0;
+
+ fixP->fx_addnumber = val;
+#endif
- return;
-} /* md_apply_fix() */
+ md_number_to_imm (place, val, fixP->fx_size, fixP);
+ }
+ else
+ md_number_to_field (place, val, fixP->fx_bit_fixP);
+
+#ifdef BFD_ASSEMBLER
+ return 0;
+#endif
+}
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-/*
- * emit_relocations()
- *
- * Crawl along a fixS chain. Emit the segment's relocations.
- */
-static void
-emit_machine_reloc (fixP, segment_address_in_file)
- register fixS * fixP; /* Fixup chain for this segment. */
- relax_addressT segment_address_in_file;
+void
+tc_bout_fix_to_chars (where, fixP, segment_address_in_file)
+ char *where;
+ fixS *fixP;
+ relax_addressT segment_address_in_file;
{
- struct reloc_info_generic ri;
- register symbolS * symbolP;
-
- /* JF this is for paranoia */
- bzero((char *)&ri,sizeof(ri));
- for (; fixP; fixP = fixP->fx_next)
+ static const unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
+ struct relocation_info ri;
+ symbolS *symbolP;
+
+ memset ((char *) &ri, '\0', sizeof (ri));
+ symbolP = fixP->fx_addsy;
+ know (symbolP != 0 || fixP->fx_r_type != NO_RELOC);
+ ri.r_bsr = fixP->fx_bsr; /*SAC LD RELAX HACK */
+ /* These two 'cuz of NS32K */
+ ri.r_callj = fixP->fx_tcbit;
+ if (fixP->fx_bit_fixP)
+ ri.r_length = 2;
+ else
+ ri.r_length = nbytes_r_length[fixP->fx_size];
+ ri.r_pcrel = fixP->fx_pcrel;
+ ri.r_address = fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file;
+
+ if (fixP->fx_r_type != NO_RELOC)
{
- if ((symbolP = fixP->fx_addsy) != 0)
+ switch (fixP->fx_r_type)
{
- /* These two 'cuz of NS32K */
- ri . r_bsr = fixP->fx_bsr;
- ri . r_disp = fixP->fx_im_disp;
-
- ri . r_callj = fixP->fx_callj;
-
- ri . r_length = nbytes_r_length [fixP->fx_size];
- ri . r_pcrel = fixP->fx_pcrel;
- ri . r_address = fixP->fx_frag->fr_address
- + fixP->fx_where
- - segment_address_in_file;
- if (!S_IS_DEFINED(symbolP))
- {
- ri . r_extern = 1;
- ri . r_symbolnum = symbolP->sy_number;
- }
- else
- {
- ri . r_extern = 0;
- ri . r_symbolnum = S_GET_TYPE(symbolP);
- }
-
- /* Output the relocation information in machine-dependent form. */
- md_ri_to_chars(next_object_file_charP, &ri);
- next_object_file_charP += sizeof(struct relocation_info);
+ case rs_align:
+ ri.r_index = -2;
+ ri.r_pcrel = 1;
+ ri.r_length = fixP->fx_size - 1;
+ break;
+ case rs_org:
+ ri.r_index = -2;
+ ri.r_pcrel = 0;
+ break;
+ case rs_fill:
+ ri.r_index = -1;
+ break;
+ default:
+ abort ();
}
+ ri.r_extern = 0;
+ }
+ else if (linkrelax || !S_IS_DEFINED (symbolP) || fixP->fx_bsr)
+ {
+ ri.r_extern = 1;
+ ri.r_index = symbolP->sy_number;
+ }
+ else
+ {
+ ri.r_extern = 0;
+ ri.r_index = S_GET_TYPE (symbolP);
}
-} /* emit_machine_reloc() */
+ /* Output the relocation information in machine-dependent form. */
+ md_ri_to_chars (where, &ri);
+}
+
#endif /* OBJ_AOUT or OBJ_BOUT */
-/* Align an address by rounding it up to the specified boundary.
- */
-long md_section_align(seg, addr)
-segT seg;
-long addr; /* Address to be rounded up */
+#if defined (OBJ_COFF) && defined (BFD)
+short
+tc_coff_fix2rtype (fixP)
+ fixS *fixP;
+{
+ if (fixP->fx_bsr)
+ abort ();
+
+ if (fixP->fx_pcrel == 0 && fixP->fx_size == 4)
+ return R_RELLONG;
+
+ if (fixP->fx_pcrel != 0 && fixP->fx_size == 4)
+ return R_IPRMED;
+
+ abort ();
+ return 0;
+}
+
+int
+tc_coff_sizemachdep (frag)
+ fragS *frag;
{
- return((addr + (1 << section_alignment[(int) seg]) - 1) & (-1 << section_alignment[(int) seg]));
-} /* md_section_align() */
+ if (frag->fr_next)
+ return frag->fr_next->fr_address - frag->fr_address;
+ else
+ return 0;
+}
+#endif
+
+/* Align an address by rounding it up to the specified boundary. */
+valueT
+md_section_align (seg, addr)
+ segT seg;
+ valueT addr; /* Address to be rounded up */
+{
+ int align;
+#ifdef BFD_ASSEMBLER
+ align = bfd_get_section_alignment (stdoutput, seg);
+#else
+ align = section_alignment[(int) seg];
+#endif
+ return (addr + (1 << align) - 1) & (-1 << align);
+}
+
+extern int coff_flags;
#ifdef OBJ_COFF
-void tc_headers_hook(headers)
-object_headers *headers;
-{
- unsigned short arch_flag = 0;
-
- if (iclasses_seen == I_BASE){
- headers->filehdr.f_flags |= F_I960CORE;
- } else if (iclasses_seen & I_CX){
- headers->filehdr.f_flags |= F_I960CA;
- } else if (iclasses_seen & I_MIL){
- headers->filehdr.f_flags |= F_I960MC;
- } else if (iclasses_seen & (I_DEC|I_FP)){
- headers->filehdr.f_flags |= F_I960KB;
- } else {
- headers->filehdr.f_flags |= F_I960KA;
- } /* set arch flag */
-
- if (flagseen['R']) {
- headers->filehdr.f_magic = I960RWMAGIC;
- headers->aouthdr.magic = OMAGIC;
- } else {
- headers->filehdr.f_magic = I960ROMAGIC;
- headers->aouthdr.magic = NMAGIC;
- } /* set magic numbers */
-
- return;
-} /* tc_headers_hook() */
+void
+tc_headers_hook (headers)
+ object_headers *headers;
+{
+ switch (architecture)
+ {
+ case ARCH_KA:
+ coff_flags |= F_I960KA;
+ break;
+
+ case ARCH_KB:
+ coff_flags |= F_I960KB;
+ break;
+
+ case ARCH_MC:
+ coff_flags |= F_I960MC;
+ break;
+
+ case ARCH_CA:
+ coff_flags |= F_I960CA;
+ break;
+
+ case ARCH_JX:
+ coff_flags |= F_I960JX;
+ break;
+
+ case ARCH_HX:
+ coff_flags |= F_I960HX;
+ break;
+
+ default:
+ if (iclasses_seen == I_BASE)
+ coff_flags |= F_I960CORE;
+ else if (iclasses_seen & I_CX)
+ coff_flags |= F_I960CA;
+ else if (iclasses_seen & I_HX)
+ coff_flags |= F_I960HX;
+ else if (iclasses_seen & I_JX)
+ coff_flags |= F_I960JX;
+ else if (iclasses_seen & I_CX2)
+ coff_flags |= F_I960CA;
+ else if (iclasses_seen & I_MIL)
+ coff_flags |= F_I960MC;
+ else if (iclasses_seen & (I_DEC | I_FP))
+ coff_flags |= F_I960KB;
+ else
+ coff_flags |= F_I960KA;
+ break;
+ }
+
+ if (flag_readonly_data_in_text)
+ {
+ headers->filehdr.f_magic = I960RWMAGIC;
+ headers->aouthdr.magic = OMAGIC;
+ }
+ else
+ {
+ headers->filehdr.f_magic = I960ROMAGIC;
+ headers->aouthdr.magic = NMAGIC;
+ } /* set magic numbers */
+}
+
#endif /* OBJ_COFF */
-/*
- * Things going on here:
- *
- * For bout, We need to assure a couple of simplifying
- * assumptions about leafprocs for the linker: the leafproc
- * entry symbols will be defined in the same assembly in
- * which they're declared with the '.leafproc' directive;
- * and if a leafproc has both 'call' and 'bal' entry points
- * they are both global or both local.
- *
- * For coff, the call symbol has a second aux entry that
- * contains the bal entry point. The bal symbol becomes a
- * label.
- *
- * For coff representation, the call symbol has a second aux entry that
- * contains the bal entry point. The bal symbol becomes a label.
- *
- */
+#ifndef BFD_ASSEMBLER
+
+/* Things going on here:
+
+ For bout, We need to assure a couple of simplifying
+ assumptions about leafprocs for the linker: the leafproc
+ entry symbols will be defined in the same assembly in
+ which they're declared with the '.leafproc' directive;
+ and if a leafproc has both 'call' and 'bal' entry points
+ they are both global or both local.
+
+ For coff, the call symbol has a second aux entry that
+ contains the bal entry point. The bal symbol becomes a
+ label.
-void tc_crawl_symbol_chain(headers)
-object_headers *headers;
+ For coff representation, the call symbol has a second aux entry that
+ contains the bal entry point. The bal symbol becomes a label. */
+
+void
+tc_crawl_symbol_chain (headers)
+ object_headers *headers;
{
- symbolS *symbolP;
+ symbolS *symbolP;
- for (symbolP = symbol_rootP; symbolP; symbolP = symbol_next(symbolP)) {
+ for (symbolP = symbol_rootP; symbolP; symbolP = symbol_next (symbolP))
+ {
#ifdef OBJ_COFF
- if (TC_S_IS_SYSPROC(symbolP)) {
- /* second aux entry already contains the sysproc number */
- S_SET_NUMBER_AUXILIARY(symbolP, 2);
- S_SET_STORAGE_CLASS(symbolP, C_SCALL);
- S_SET_DATA_TYPE(symbolP, S_GET_DATA_TYPE(symbolP) | (DT_FCN << N_BTSHFT));
- continue;
- } /* rewrite sysproc */
+ if (TC_S_IS_SYSPROC (symbolP))
+ {
+ /* second aux entry already contains the sysproc number */
+ S_SET_NUMBER_AUXILIARY (symbolP, 2);
+ S_SET_STORAGE_CLASS (symbolP, C_SCALL);
+ S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT));
+ continue;
+ } /* rewrite sysproc */
#endif /* OBJ_COFF */
- if (!TC_S_IS_BALNAME(symbolP) && !TC_S_IS_CALLNAME(symbolP)) {
- continue;
- } /* Not a leafproc symbol */
+ if (!TC_S_IS_BALNAME (symbolP) && !TC_S_IS_CALLNAME (symbolP))
+ {
+ continue;
+ } /* Not a leafproc symbol */
- if (!S_IS_DEFINED(symbolP)) {
- as_bad("leafproc symbol '%s' undefined", S_GET_NAME(symbolP));
- } /* undefined leaf */
+ if (!S_IS_DEFINED (symbolP))
+ {
+ as_bad (_("leafproc symbol '%s' undefined"), S_GET_NAME (symbolP));
+ } /* undefined leaf */
- if (TC_S_IS_CALLNAME(symbolP)) {
- symbolS *balP = tc_get_bal_of_call(symbolP);
- if (S_IS_EXTERNAL(symbolP) != S_IS_EXTERNAL(balP)) {
- S_SET_EXTERNAL(symbolP);
- S_SET_EXTERNAL(balP);
- as_warn("Warning: making leafproc entries %s and %s both global\n",
- S_GET_NAME(symbolP), S_GET_NAME(balP));
- } /* externality mismatch */
- } /* if callname */
- } /* walk the symbol chain */
+ if (TC_S_IS_CALLNAME (symbolP))
+ {
+ symbolS *balP = tc_get_bal_of_call (symbolP);
+ if (S_IS_EXTERNAL (symbolP) != S_IS_EXTERNAL (balP))
+ {
+ S_SET_EXTERNAL (symbolP);
+ S_SET_EXTERNAL (balP);
+ as_warn (_("Warning: making leafproc entries %s and %s both global\n"),
+ S_GET_NAME (symbolP), S_GET_NAME (balP));
+ } /* externality mismatch */
+ } /* if callname */
+ } /* walk the symbol chain */
+}
- return;
-} /* tc_crawl_symbol_chain() */
+#endif /* ! BFD_ASSEMBLER */
-/*
- * For aout or bout, the bal immediately follows the call.
- *
- * For coff, we cheat and store a pointer to the bal symbol
- * in the second aux entry of the call.
- */
+/* For aout or bout, the bal immediately follows the call.
+
+ For coff, we cheat and store a pointer to the bal symbol in the
+ second aux entry of the call. */
+
+#undef OBJ_ABOUT
+#ifdef OBJ_AOUT
+#define OBJ_ABOUT
+#endif
+#ifdef OBJ_BOUT
+#define OBJ_ABOUT
+#endif
-void tc_set_bal_of_call(callP, balP)
-symbolS *callP;
-symbolS *balP;
+void
+tc_set_bal_of_call (callP, balP)
+ symbolS *callP;
+ symbolS *balP;
{
- know(TC_S_IS_CALLNAME(callP));
- know(TC_S_IS_BALNAME(balP));
-
-#ifdef OBJ_COFF
+ know (TC_S_IS_CALLNAME (callP));
+ know (TC_S_IS_BALNAME (balP));
- callP->sy_symbol.ost_auxent[1].x_bal.x_balntry = (int) balP;
- S_SET_NUMBER_AUXILIARY(callP,2);
+#ifdef OBJ_COFF
-#elif defined(OBJ_AOUT) || defined(OBJ_BOUT)
+ callP->sy_tc = balP;
+ S_SET_NUMBER_AUXILIARY (callP, 2);
- /* If the 'bal' entry doesn't immediately follow the 'call'
- * symbol, unlink it from the symbol list and re-insert it.
- */
- if (symbol_next(callP) != balP) {
- symbol_remove(balP, &symbol_rootP, &symbol_lastP);
- symbol_append(balP, callP, &symbol_rootP, &symbol_lastP);
- } /* if not in order */
+#else /* ! OBJ_COFF */
+#ifdef OBJ_ABOUT
-#else
- (as yet unwritten.);
-#endif /* switch on OBJ_FORMAT */
-
- return;
-} /* tc_set_bal_of_call() */
+ /* If the 'bal' entry doesn't immediately follow the 'call'
+ * symbol, unlink it from the symbol list and re-insert it.
+ */
+ if (symbol_next (callP) != balP)
+ {
+ symbol_remove (balP, &symbol_rootP, &symbol_lastP);
+ symbol_append (balP, callP, &symbol_rootP, &symbol_lastP);
+ } /* if not in order */
+
+#else /* ! OBJ_ABOUT */
+ as_fatal ("Only supported for a.out, b.out, or COFF");
+#endif /* ! OBJ_ABOUT */
+#endif /* ! OBJ_COFF */
+}
-char *_tc_get_bal_of_call(callP)
-symbolS *callP;
+symbolS *
+tc_get_bal_of_call (callP)
+ symbolS *callP;
{
- symbolS *retval;
+ symbolS *retval;
- know(TC_S_IS_CALLNAME(callP));
+ know (TC_S_IS_CALLNAME (callP));
#ifdef OBJ_COFF
- retval = (symbolS *) (callP->sy_symbol.ost_auxent[1].x_bal.x_balntry);
-#elif defined(OBJ_AOUT) || defined(OBJ_BOUT)
- retval = symbol_next(callP);
+ retval = callP->sy_tc;
#else
- (as yet unwritten.);
-#endif /* switch on OBJ_FORMAT */
+#ifdef OBJ_ABOUT
+ retval = symbol_next (callP);
+#else
+ as_fatal ("Only supported for a.out, b.out, or COFF");
+#endif /* ! OBJ_ABOUT */
+#endif /* ! OBJ_COFF */
- know(TC_S_IS_BALNAME(retval));
- return((char *) retval);
-} /* _tc_get_bal_of_call() */
+ know (TC_S_IS_BALNAME (retval));
+ return retval;
+} /* _tc_get_bal_of_call() */
-void tc_coff_symbol_emit_hook(symbolP)
-symbolS *symbolP;
+void
+tc_coff_symbol_emit_hook (symbolP)
+ symbolS *symbolP;
{
- if (TC_S_IS_CALLNAME(symbolP)) {
+ if (TC_S_IS_CALLNAME (symbolP))
+ {
#ifdef OBJ_COFF
- symbolS *balP = tc_get_bal_of_call(symbolP);
-
- /* second aux entry contains the bal entry point */
-/* S_SET_NUMBER_AUXILIARY(symbolP, 2); */
- symbolP->sy_symbol.ost_auxent[1].x_bal.x_balntry = S_GET_VALUE(balP);
- S_SET_STORAGE_CLASS(symbolP, (!SF_GET_LOCAL(symbolP) ? C_LEAFEXT : C_LEAFSTAT));
- S_SET_DATA_TYPE(symbolP, S_GET_DATA_TYPE(symbolP) | (DT_FCN << N_BTSHFT));
- /* fix up the bal symbol */
- S_SET_STORAGE_CLASS(balP, C_LABEL);
+ symbolS *balP = tc_get_bal_of_call (symbolP);
+
+#if 0
+ /* second aux entry contains the bal entry point */
+ S_SET_NUMBER_AUXILIARY (symbolP, 2);
+#endif
+ symbolP->sy_symbol.ost_auxent[1].x_bal.x_balntry = S_GET_VALUE (balP);
+ if (S_GET_STORAGE_CLASS (symbolP) == C_EXT)
+ S_SET_STORAGE_CLASS (symbolP, C_LEAFEXT);
+ else
+ S_SET_STORAGE_CLASS (symbolP, C_LEAFSTAT);
+ S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT));
+ /* fix up the bal symbol */
+ S_SET_STORAGE_CLASS (balP, C_LABEL);
#endif /* OBJ_COFF */
- } /* only on calls */
-
- return;
-} /* tc_coff_symbol_emit_hook() */
+ } /* only on calls */
+}
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
+void
+i960_handle_align (fragp)
+ fragS *fragp;
+{
+ if (!linkrelax)
+ return;
+
+#ifndef OBJ_BOUT
+
+ as_bad (_("option --link-relax is only supported in b.out format"));
+ linkrelax = 0;
+ return;
+
+#else
+
+ /* The text section "ends" with another alignment reloc, to which we
+ aren't adding padding. */
+ if (fragp->fr_next == text_last_frag
+ || fragp->fr_next == data_last_frag)
+ return;
+
+ /* alignment directive */
+ fix_new (fragp, fragp->fr_fix, fragp->fr_offset, 0, 0, 0,
+ (int) fragp->fr_type);
+#endif /* OBJ_BOUT */
+}
+
+int
+i960_validate_fix (fixP, this_segment_type, add_symbolPP)
+ fixS *fixP;
+ segT this_segment_type;
+ symbolS **add_symbolPP;
+{
+#define add_symbolP (*add_symbolPP)
+ if (fixP->fx_tcbit && TC_S_IS_CALLNAME (add_symbolP))
+ {
+ /* Relocation should be done via the associated 'bal'
+ entry point symbol. */
+
+ if (!TC_S_IS_BALNAME (tc_get_bal_of_call (add_symbolP)))
+ {
+ as_bad (_("No 'bal' entry point for leafproc %s"),
+ S_GET_NAME (add_symbolP));
+ return 1;
+ }
+ fixP->fx_addsy = add_symbolP = tc_get_bal_of_call (add_symbolP);
+ }
+#if 0
+ /* Still have to work out other conditions for these tests. */
+ {
+ if (fixP->fx_tcbit)
+ {
+ as_bad (_("callj to difference of two symbols"));
+ return 1;
+ }
+ reloc_callj (fixP);
+ if ((int) fixP->fx_bit_fixP == 13)
+ {
+ /* This is a COBR instruction. They have only a 13-bit
+ displacement and are only to be used for local branches:
+ flag as error, don't generate relocation. */
+ as_bad (_("can't use COBR format with external label"));
+ fixP->fx_addsy = NULL; /* No relocations please. */
+ return 1;
+ }
+ }
+#endif
+#undef add_symbolP
+ return 0;
+}
+
+#ifdef BFD_ASSEMBLER
+
+/* From cgen.c: */
+
+static short
+tc_bfd_fix2rtype (fixP)
+ fixS *fixP;
+{
+#if 0
+ if (fixP->fx_bsr)
+ abort ();
+#endif
+
+ if (fixP->fx_pcrel == 0 && fixP->fx_size == 4)
+ return BFD_RELOC_32;
+
+ if (fixP->fx_pcrel != 0 && fixP->fx_size == 4)
+ return BFD_RELOC_24_PCREL;
+
+ abort ();
+ return 0;
+}
+
+/* Translate internal representation of relocation info to BFD target
+ format.
+
+ FIXME: To what extent can we get all relevant targets to use this? */
+
+arelent *
+tc_gen_reloc (section, fixP)
+ asection *section;
+ fixS *fixP;
+{
+ arelent * reloc;
+
+ reloc = (arelent *) xmalloc (sizeof (arelent));
+
+ /* HACK: Is this right? */
+ fixP->fx_r_type = tc_bfd_fix2rtype (fixP);
+
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type);
+ if (reloc->howto == (reloc_howto_type *) NULL)
+ {
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ "internal error: can't export reloc type %d (`%s')",
+ fixP->fx_r_type,
+ bfd_get_reloc_code_name (fixP->fx_r_type));
+ return NULL;
+ }
+
+ assert (!fixP->fx_pcrel == !reloc->howto->pc_relative);
+
+ reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy);
+ reloc->address = fixP->fx_frag->fr_address + fixP->fx_where;
+ reloc->addend = fixP->fx_addnumber;
+
+ return reloc;
+}
+
+/* end from cgen.c */
+
+#endif /* BFD_ASSEMBLER */
-/* end of i960.c */
+/* end of tc-i960.c */
projects / deliverable / binutils-gdb.git / blobdiff