-/* tc-m32r.c -- Assembler for the Mitsubishi M32R.
- Copyright (C) 1996, 1997, 1998, 1999, 2000
- Free Software Foundation, Inc.
+/* tc-m32r.c -- Assembler for the Renesas M32R.
+ Copyright (C) 1996-2019 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ the Free Software Foundation, 51 Franklin Street - Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-#include <stdio.h>
-#include <ctype.h>
#include "as.h"
+#include "safe-ctype.h"
#include "subsegs.h"
#include "symcat.h"
#include "opcodes/m32r-desc.h"
#include "opcodes/m32r-opc.h"
#include "cgen.h"
+#include "elf/m32r.h"
/* Linked list of symbols that are debugging symbols to be defined as the
beginning of the current instruction. */
alignment request. */
static int seen_relaxable_p = 0;
+/* Non-zero if we are generating PIC code. */
+int pic_code;
+
/* Non-zero if -relax specified, in which case sufficient relocs are output
for the linker to do relaxing.
We do simple forms of relaxing internally, but they are always done.
This flag does not apply to them. */
static int m32r_relax;
-#if 0
-/* Not supported yet. */
-/* If non-NULL, pointer to cpu description file to read.
- This allows runtime additions to the assembler. */
-static const char *m32r_cpu_desc;
-#endif
-
/* Non-zero if warn when a high/shigh reloc has no matching low reloc.
Each high/shigh reloc must be paired with it's low cousin in order to
properly calculate the addend in a relocatable link (since there is a
shouldn't assume or require it to). */
static int warn_unmatched_high = 0;
-/* Non-zero if -m32rx has been specified, in which case support for the
- extended M32RX instruction set should be enabled. */
-static int enable_m32rx = 0;
+/* 1 if -m32rx has been specified, in which case support for
+ the extended M32RX instruction set should be enabled.
+ 2 if -m32r2 has been specified, in which case support for
+ the extended M32R2 instruction set should be enabled. */
+static int enable_m32rx = 0; /* Default to M32R. */
/* Non-zero if -m32rx -hidden has been specified, in which case support for
the special M32RX instruction set should be enabled. */
static int enable_special = 0;
+/* Non-zero if -bitinst has been specified, in which case support
+ for extended M32R bit-field instruction set should be enabled. */
+static int enable_special_m32r = 1;
+
+/* Non-zero if -float has been specified, in which case support for
+ extended M32R floating point instruction set should be enabled. */
+static int enable_special_float = 0;
+
/* Non-zero if the programmer should be warned when an explicit parallel
instruction might have constraint violations. */
static int warn_explicit_parallel_conflicts = 1;
+/* Non-zero if the programmer should not receive any messages about
+ parallel instruction with potential or real constraint violations.
+ The ability to suppress these messages is intended only for hardware
+ vendors testing the chip. It supersedes
+ warn_explicit_parallel_conflicts. */
+static int ignore_parallel_conflicts = 0;
+
/* Non-zero if insns can be made parallel. */
+static int use_parallel = 0;
+
+/* Non-zero if optimizations should be performed. */
static int optimize;
+/* m32r er_flags. */
+static int m32r_flags = 0;
+
/* Stuff for .scomm symbols. */
static segT sbss_section;
static asection scom_section;
const char comment_chars[] = ";";
const char line_comment_chars[] = "#";
-const char line_separator_chars[] = "";
+const char line_separator_chars[] = "!";
const char EXP_CHARS[] = "eE";
const char FLT_CHARS[] = "dD";
static struct m32r_hi_fixup *m32r_hi_fixup_list;
\f
+static const struct
+{
+ enum bfd_architecture bfd_mach;
+ int mach_flags;
+} mach_table[] =
+{
+ { bfd_mach_m32r, (1<<MACH_M32R) },
+ { bfd_mach_m32rx, (1<<MACH_M32RX) },
+ { bfd_mach_m32r2, (1<<MACH_M32R2) }
+};
+
static void
-allow_m32rx (on)
- int on;
+allow_m32rx (int on)
{
enable_m32rx = on;
if (stdoutput != NULL)
- bfd_set_arch_mach (stdoutput, TARGET_ARCH,
- enable_m32rx ? bfd_mach_m32rx : bfd_mach_m32r);
+ bfd_set_arch_mach (stdoutput, TARGET_ARCH, mach_table[on].bfd_mach);
+
+ if (gas_cgen_cpu_desc != NULL)
+ gas_cgen_cpu_desc->machs = mach_table[on].mach_flags;
}
\f
-#define M32R_SHORTOPTS "O"
+#define M32R_SHORTOPTS "O::K:"
const char *md_shortopts = M32R_SHORTOPTS;
+enum md_option_enums
+{
+ OPTION_M32R = OPTION_MD_BASE,
+ OPTION_M32RX,
+ OPTION_M32R2,
+ OPTION_BIG,
+ OPTION_LITTLE,
+ OPTION_PARALLEL,
+ OPTION_NO_PARALLEL,
+ OPTION_WARN_PARALLEL,
+ OPTION_NO_WARN_PARALLEL,
+ OPTION_IGNORE_PARALLEL,
+ OPTION_NO_IGNORE_PARALLEL,
+ OPTION_SPECIAL,
+ OPTION_SPECIAL_M32R,
+ OPTION_NO_SPECIAL_M32R,
+ OPTION_SPECIAL_FLOAT,
+ OPTION_WARN_UNMATCHED,
+ OPTION_NO_WARN_UNMATCHED
+};
+
struct option md_longopts[] =
{
-#define OPTION_M32R (OPTION_MD_BASE)
-#define OPTION_M32RX (OPTION_M32R + 1)
-#define OPTION_WARN_PARALLEL (OPTION_M32RX + 1)
-#define OPTION_NO_WARN_PARALLEL (OPTION_WARN_PARALLEL + 1)
-#define OPTION_SPECIAL (OPTION_NO_WARN_PARALLEL + 1)
-#define OPTION_WARN_UNMATCHED (OPTION_SPECIAL + 1)
-#define OPTION_NO_WARN_UNMATCHED (OPTION_WARN_UNMATCHED + 1)
{"m32r", no_argument, NULL, OPTION_M32R},
{"m32rx", no_argument, NULL, OPTION_M32RX},
+ {"m32r2", no_argument, NULL, OPTION_M32R2},
+ {"big", no_argument, NULL, OPTION_BIG},
+ {"little", no_argument, NULL, OPTION_LITTLE},
+ {"EB", no_argument, NULL, OPTION_BIG},
+ {"EL", no_argument, NULL, OPTION_LITTLE},
+ {"parallel", no_argument, NULL, OPTION_PARALLEL},
+ {"no-parallel", no_argument, NULL, OPTION_NO_PARALLEL},
{"warn-explicit-parallel-conflicts", no_argument, NULL, OPTION_WARN_PARALLEL},
{"Wp", no_argument, NULL, OPTION_WARN_PARALLEL},
{"no-warn-explicit-parallel-conflicts", no_argument, NULL, OPTION_NO_WARN_PARALLEL},
{"Wnp", no_argument, NULL, OPTION_NO_WARN_PARALLEL},
+ {"ignore-parallel-conflicts", no_argument, NULL, OPTION_IGNORE_PARALLEL},
+ {"Ip", no_argument, NULL, OPTION_IGNORE_PARALLEL},
+ {"no-ignore-parallel-conflicts", no_argument, NULL, OPTION_NO_IGNORE_PARALLEL},
+ {"nIp", no_argument, NULL, OPTION_NO_IGNORE_PARALLEL},
{"hidden", no_argument, NULL, OPTION_SPECIAL},
+ {"bitinst", no_argument, NULL, OPTION_SPECIAL_M32R},
+ {"no-bitinst", no_argument, NULL, OPTION_NO_SPECIAL_M32R},
+ {"float", no_argument, NULL, OPTION_SPECIAL_FLOAT},
/* Sigh. I guess all warnings must now have both variants. */
{"warn-unmatched-high", no_argument, NULL, OPTION_WARN_UNMATCHED},
{"Wuh", no_argument, NULL, OPTION_WARN_UNMATCHED},
{"no-warn-unmatched-high", no_argument, NULL, OPTION_NO_WARN_UNMATCHED},
{"Wnuh", no_argument, NULL, OPTION_NO_WARN_UNMATCHED},
-
-#if 0
- /* Not supported yet. */
-#define OPTION_RELAX (OPTION_NO_WARN_UNMATCHED + 1)
-#define OPTION_CPU_DESC (OPTION_RELAX + 1)
- {"relax", no_argument, NULL, OPTION_RELAX},
- {"cpu-desc", required_argument, NULL, OPTION_CPU_DESC},
-#endif
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
+static void
+little (int on)
+{
+ target_big_endian = ! on;
+}
+
+/* Use parallel execution. */
+
+static int
+parallel (void)
+{
+ if (! enable_m32rx)
+ return 0;
+
+ if (use_parallel == 1)
+ return 1;
+
+ return 0;
+}
+
int
-md_parse_option (c, arg)
- int c;
- char *arg;
+md_parse_option (int c, const char *arg ATTRIBUTE_UNUSED)
{
switch (c)
{
case 'O':
optimize = 1;
+ use_parallel = 1;
break;
case OPTION_M32R:
allow_m32rx (1);
break;
+ case OPTION_M32R2:
+ allow_m32rx (2);
+ enable_special = 1;
+ enable_special_m32r = 1;
+ break;
+
+ case OPTION_BIG:
+ target_big_endian = 1;
+ break;
+
+ case OPTION_LITTLE:
+ target_big_endian = 0;
+ break;
+
+ case OPTION_PARALLEL:
+ use_parallel = 1;
+ break;
+
+ case OPTION_NO_PARALLEL:
+ use_parallel = 0;
+ break;
+
case OPTION_WARN_PARALLEL:
warn_explicit_parallel_conflicts = 1;
break;
warn_explicit_parallel_conflicts = 0;
break;
+ case OPTION_IGNORE_PARALLEL:
+ ignore_parallel_conflicts = 1;
+ break;
+
+ case OPTION_NO_IGNORE_PARALLEL:
+ ignore_parallel_conflicts = 0;
+ break;
+
case OPTION_SPECIAL:
if (enable_m32rx)
enable_special = 1;
}
break;
+ case OPTION_SPECIAL_M32R:
+ enable_special_m32r = 1;
+ break;
+
+ case OPTION_NO_SPECIAL_M32R:
+ enable_special_m32r = 0;
+ break;
+
+ case OPTION_SPECIAL_FLOAT:
+ enable_special_float = 1;
+ break;
+
case OPTION_WARN_UNMATCHED:
warn_unmatched_high = 1;
break;
warn_unmatched_high = 0;
break;
-#if 0
- /* Not supported yet. */
- case OPTION_RELAX:
- m32r_relax = 1;
- break;
- case OPTION_CPU_DESC:
- m32r_cpu_desc = arg;
+ case 'K':
+ if (strcmp (arg, "PIC") != 0)
+ as_warn (_("Unrecognized option following -K"));
+ else
+ pic_code = 1;
break;
-#endif
default:
return 0;
}
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
fprintf (stream, _(" M32R specific command line options:\n"));
fprintf (stream, _("\
-m32rx support the extended m32rx instruction set\n"));
fprintf (stream, _("\
- -O try to combine instructions in parallel\n"));
+ -m32r2 support the extended m32r2 instruction set\n"));
+ fprintf (stream, _("\
+ -EL,-little produce little endian code and data\n"));
+ fprintf (stream, _("\
+ -EB,-big produce big endian code and data\n"));
+ fprintf (stream, _("\
+ -parallel try to combine instructions in parallel\n"));
+ fprintf (stream, _("\
+ -no-parallel disable -parallel\n"));
+ fprintf (stream, _("\
+ -no-bitinst disallow the M32R2's extended bit-field instructions\n"));
+ fprintf (stream, _("\
+ -O try to optimize code. Implies -parallel\n"));
fprintf (stream, _("\
-warn-explicit-parallel-conflicts warn when parallel instructions\n"));
fprintf (stream, _("\
- violate contraints\n"));
+ might violate constraints\n"));
fprintf (stream, _("\
-no-warn-explicit-parallel-conflicts do not warn when parallel\n"));
fprintf (stream, _("\
- instructions violate contraints\n"));
+ instructions might violate constraints\n"));
fprintf (stream, _("\
-Wp synonym for -warn-explicit-parallel-conflicts\n"));
fprintf (stream, _("\
-Wnp synonym for -no-warn-explicit-parallel-conflicts\n"));
+ fprintf (stream, _("\
+ -ignore-parallel-conflicts do not check parallel instructions\n"));
+ fprintf (stream, _("\
+ for constraint violations\n"));
+ fprintf (stream, _("\
+ -no-ignore-parallel-conflicts check parallel instructions for\n"));
+ fprintf (stream, _("\
+ constraint violations\n"));
+ fprintf (stream, _("\
+ -Ip synonym for -ignore-parallel-conflicts\n"));
+ fprintf (stream, _("\
+ -nIp synonym for -no-ignore-parallel-conflicts\n"));
fprintf (stream, _("\
-warn-unmatched-high warn when an (s)high reloc has no matching low reloc\n"));
fprintf (stream, _("\
-Wnuh synonym for -no-warn-unmatched-high\n"));
-#if 0
fprintf (stream, _("\
- -relax create linker relaxable code\n"));
- fprintf (stream, _("\
- -cpu-desc provide runtime cpu description file\n"));
-#endif
+ -KPIC generate PIC\n"));
}
-static void fill_insn PARAMS ((int));
-static void m32r_scomm PARAMS ((int));
-static void debug_sym PARAMS ((int));
-static void expand_debug_syms PARAMS ((sym_linkS *, int));
-
/* Set by md_assemble for use by m32r_fill_insn. */
static subsegT prev_subseg;
static segT prev_seg;
-/* The target specific pseudo-ops which we support. */
-const pseudo_typeS md_pseudo_table[] =
+#define GOT_NAME "_GLOBAL_OFFSET_TABLE_"
+symbolS * GOT_symbol;
+
+static inline int
+m32r_PIC_related_p (symbolS *sym)
{
- { "word", cons, 4 },
- { "fillinsn", fill_insn, 0 },
- { "scomm", m32r_scomm, 0 },
- { "debugsym", debug_sym, 0 },
- /* Not documented as so far there is no need for them.... */
- { "m32r", allow_m32rx, 0 },
- { "m32rx", allow_m32rx, 1 },
- { NULL, NULL, 0 }
-};
+ expressionS *exp;
+
+ if (! sym)
+ return 0;
+
+ if (sym == GOT_symbol)
+ return 1;
+
+ exp = symbol_get_value_expression (sym);
+
+ return (exp->X_op == O_PIC_reloc
+ || exp->X_md == BFD_RELOC_M32R_26_PLTREL
+ || m32r_PIC_related_p (exp->X_add_symbol)
+ || m32r_PIC_related_p (exp->X_op_symbol));
+}
+
+static inline int
+m32r_check_fixup (expressionS *main_exp, bfd_reloc_code_real_type *r_type_p)
+{
+ expressionS *exp = main_exp;
+
+ if (exp->X_op == O_add && m32r_PIC_related_p (exp->X_op_symbol))
+ return 1;
+
+ if (exp->X_op == O_symbol && exp->X_add_symbol)
+ {
+ if (exp->X_add_symbol == GOT_symbol)
+ {
+ *r_type_p = BFD_RELOC_M32R_GOTPC24;
+ return 0;
+ }
+ }
+ else if (exp->X_op == O_add)
+ {
+ exp = symbol_get_value_expression (exp->X_add_symbol);
+ if (! exp)
+ return 0;
+ }
+
+ if (exp->X_op == O_PIC_reloc)
+ {
+ *r_type_p = exp->X_md;
+ if (exp == main_exp)
+ exp->X_op = O_symbol;
+ else
+ {
+ main_exp->X_add_symbol = exp->X_add_symbol;
+ main_exp->X_add_number += exp->X_add_number;
+ }
+ }
+ else
+ return (m32r_PIC_related_p (exp->X_add_symbol)
+ || m32r_PIC_related_p (exp->X_op_symbol));
+
+ return 0;
+}
/* FIXME: Should be machine generated. */
-#define NOP_INSN 0x7000
+#define NOP_INSN 0x7000
#define PAR_NOP_INSN 0xf000 /* Can only be used in 2nd slot. */
/* This is called from HANDLE_ALIGN in write.c. Fill in the contents
of an rs_align_code fragment. */
void
-m32r_handle_align (fragp)
- fragS *fragp;
+m32r_handle_align (fragS *fragp)
{
static const unsigned char nop_pattern[] = { 0xf0, 0x00 };
static const unsigned char multi_nop_pattern[] = { 0x70, 0x00, 0xf0, 0x00 };
seen after an insn that is relaxable. */
static void
-fill_insn (ignore)
- int ignore;
+fill_insn (int ignore ATTRIBUTE_UNUSED)
{
frag_align_code (2, 0);
prev_insn.insn = NULL;
16 bit instruction. */
static void
-debug_sym (ignore)
- int ignore;
+debug_sym (int ignore ATTRIBUTE_UNUSED)
{
- register char *name;
- register char delim;
- register char *end_name;
- register symbolS *symbolP;
- register sym_linkS *link;
+ char *name;
+ char delim;
+ symbolS *symbolP;
+ sym_linkS *lnk;
- name = input_line_pointer;
- delim = get_symbol_end ();
- end_name = input_line_pointer;
+ delim = get_symbol_name (&name);
if ((symbolP = symbol_find (name)) == NULL
&& (symbolP = md_undefined_symbol (name)) == NULL)
- {
- symbolP = symbol_new (name, undefined_section, 0, &zero_address_frag);
- }
+ symbolP = symbol_new (name, undefined_section, 0, &zero_address_frag);
symbol_table_insert (symbolP);
- if (S_IS_DEFINED (symbolP) && S_GET_SEGMENT (symbolP) != reg_section)
+ if (S_IS_DEFINED (symbolP) && (S_GET_SEGMENT (symbolP) != reg_section
+ || S_IS_EXTERNAL (symbolP)
+ || S_IS_WEAK (symbolP)))
/* xgettext:c-format */
as_bad (_("symbol `%s' already defined"), S_GET_NAME (symbolP));
else
{
- link = (sym_linkS *) xmalloc (sizeof (sym_linkS));
- link->symbol = symbolP;
- link->next = debug_sym_link;
- debug_sym_link = link;
+ lnk = XNEW (sym_linkS);
+ lnk->symbol = symbolP;
+ lnk->next = debug_sym_link;
+ debug_sym_link = lnk;
symbol_get_obj (symbolP)->local = 1;
}
- *end_name = delim;
+ (void) restore_line_pointer (delim);
demand_empty_rest_of_line ();
}
list of symbols and reassign the address. */
static void
-expand_debug_syms (syms, align)
- sym_linkS *syms;
- int align;
+expand_debug_syms (sym_linkS *syms, int align)
{
char *save_input_line = input_line_pointer;
sym_linkS *next_syms;
if (!syms)
return;
- (void) m32r_do_align (align, NULL, 0, 0);
+ (void) frag_align_code (align, 0);
for (; syms != (sym_linkS *) 0; syms = next_syms)
{
symbolS *symbolP = syms->symbol;
next_syms = syms->next;
- input_line_pointer = ".\n";
+ input_line_pointer = (char *) ".\n";
pseudo_set (symbolP);
free ((char *) syms);
}
input_line_pointer = save_input_line;
}
+void
+m32r_flush_pending_output (void)
+{
+ if (debug_sym_link)
+ {
+ expand_debug_syms (debug_sym_link, 1);
+ debug_sym_link = (sym_linkS *) 0;
+ }
+}
+
/* Cover function to fill_insn called after a label and at end of assembly.
The result is always 1: we're called in a conditional to see if the
current line is a label. */
int
-m32r_fill_insn (done)
- int done;
+m32r_fill_insn (int done)
{
if (prev_seg != NULL)
{
return 1;
}
\f
+/* The default target format to use. */
+
+const char *
+m32r_target_format (void)
+{
+#ifdef TE_LINUX
+ if (target_big_endian)
+ return "elf32-m32r-linux";
+ else
+ return "elf32-m32rle-linux";
+#else
+ if (target_big_endian)
+ return "elf32-m32r";
+ else
+ return "elf32-m32rle";
+#endif
+}
+
void
-md_begin ()
+md_begin (void)
{
flagword applicable;
segT seg;
/* Set the machine number and endian. */
gas_cgen_cpu_desc = m32r_cgen_cpu_open (CGEN_CPU_OPEN_MACHS, 0,
CGEN_CPU_OPEN_ENDIAN,
- CGEN_ENDIAN_BIG,
+ (target_big_endian ?
+ CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE),
CGEN_CPU_OPEN_END);
m32r_cgen_init_asm (gas_cgen_cpu_desc);
/* This is a callback from cgen to gas to parse operands. */
cgen_set_parse_operand_fn (gas_cgen_cpu_desc, gas_cgen_parse_operand);
-#if 0
- /* Not supported yet. */
- /* If a runtime cpu description file was provided, parse it. */
- if (m32r_cpu_desc != NULL)
- {
- const char *errmsg;
-
- errmsg = cgen_read_cpu_file (gas_cgen_cpu_desc, m32r_cpu_desc);
- if (errmsg != NULL)
- as_bad ("%s: %s", m32r_cpu_desc, errmsg);
- }
-#endif
-
/* Save the current subseg so we can restore it [it's the default one and
we don't want the initial section to be .sbss]. */
seg = now_seg;
/* The sbss section is for local .scomm symbols. */
sbss_section = subseg_new (".sbss", 0);
+ seg_info (sbss_section)->bss = 1;
/* This is copied from perform_an_assembly_pass. */
applicable = bfd_applicable_section_flags (stdoutput);
- bfd_set_section_flags (stdoutput, sbss_section, applicable & SEC_ALLOC);
-
-#if 0
- /* What does this do? [see perform_an_assembly_pass] */
- seg_info (bss_section)->bss = 1;
-#endif
+ bfd_set_section_flags (sbss_section, applicable & SEC_ALLOC);
subseg_set (seg, subseg);
/* We must construct a fake section similar to bfd_com_section
but with the name .scommon. */
- scom_section = bfd_com_section;
+ scom_section = *bfd_com_section_ptr;
scom_section.name = ".scommon";
- scom_section.output_section = &scom_section;
- scom_section.symbol = &scom_symbol;
- scom_section.symbol_ptr_ptr = &scom_section.symbol;
- scom_symbol = *bfd_com_section.symbol;
+ scom_section.output_section = & scom_section;
+ scom_section.symbol = & scom_symbol;
+ scom_section.symbol_ptr_ptr = & scom_section.symbol;
+ scom_symbol = * bfd_com_section_ptr->symbol;
scom_symbol.name = ".scommon";
- scom_symbol.section = &scom_section;
+ scom_symbol.section = & scom_section;
allow_m32rx (enable_m32rx);
+
+ gas_cgen_initialize_saved_fixups_array ();
}
#define OPERAND_IS_COND_BIT(operand, indices, index) \
checked, otherwise its inputs are examined. */
static int
-first_writes_to_seconds_operands (a, b, check_outputs)
- m32r_insn *a;
- m32r_insn *b;
- const int check_outputs;
+first_writes_to_seconds_operands (m32r_insn *a,
+ m32r_insn *b,
+ const int check_outputs)
{
const CGEN_OPINST *a_operands = CGEN_INSN_OPERANDS (a->insn);
const CGEN_OPINST *b_ops = CGEN_INSN_OPERANDS (b->insn);
int a_index;
+ if (ignore_parallel_conflicts)
+ return 0;
+
/* If at least one of the instructions takes no operands, then there is
nothing to check. There really are instructions without operands,
eg 'nop'. */
/* Returns true if the insn can (potentially) alter the program counter. */
static int
-writes_to_pc (a)
- m32r_insn *a;
+writes_to_pc (m32r_insn *a)
{
-#if 0
- /* Once PC operands are working.... */
- const CGEN_OPINST *a_operands == CGEN_INSN_OPERANDS (gas_cgen_cpu_desc,
- a->insn);
-
- if (a_operands == NULL)
- return 0;
-
- while (a_operands->type != CGEN_OPINST_END)
- {
- if (a_operands->operand != NULL
- && CGEN_OPERAND_INDEX (gas_cgen_cpu_desc,
- a_operands->operand) == M32R_OPERAND_PC)
- return 1;
-
- a_operands++;
- }
-#else
if (CGEN_INSN_ATTR_VALUE (a->insn, CGEN_INSN_UNCOND_CTI)
|| CGEN_INSN_ATTR_VALUE (a->insn, CGEN_INSN_COND_CTI))
return 1;
-#endif
return 0;
}
Otherwise return a pointer to an error message explaining why not. */
static const char *
-can_make_parallel (a, b)
- m32r_insn *a;
- m32r_insn *b;
+can_make_parallel (m32r_insn *a, m32r_insn *b)
{
PIPE_ATTR a_pipe;
PIPE_ATTR b_pipe;
|| CGEN_FIELDS_BITSIZE (&b->fields) != 16)
abort ();
- if (first_writes_to_seconds_operands (a, b, true))
- return _("Instructions write to the same destination register.");
+ if (first_writes_to_seconds_operands (a, b, TRUE))
+ return _("instructions write to the same destination register.");
a_pipe = CGEN_INSN_ATTR_VALUE (a->insn, CGEN_INSN_PIPE);
b_pipe = CGEN_INSN_ATTR_VALUE (b->insn, CGEN_INSN_PIPE);
go away if the instructions are swapped, and we want to make
sure that any other errors are detected before this happens. */
if (a_pipe == PIPE_S
- || b_pipe == PIPE_O)
+ || b_pipe == PIPE_O
+ || (b_pipe == PIPE_O_OS && (enable_m32rx != 2)))
return _("Instructions share the same execution pipeline");
return NULL;
/* Force the top bit of the second 16-bit insn to be set. */
static void
-make_parallel (buffer)
- CGEN_INSN_BYTES_PTR buffer;
+make_parallel (CGEN_INSN_BYTES_PTR buffer)
{
#if CGEN_INT_INSN_P
*buffer |= 0x8000;
/* Same as make_parallel except buffer contains the bytes in target order. */
static void
-target_make_parallel (buffer)
- char *buffer;
+target_make_parallel (char *buffer)
{
buffer[CGEN_CPU_ENDIAN (gas_cgen_cpu_desc) == CGEN_ENDIAN_BIG ? 0 : 1]
|= 0x80;
sequential operation (->). */
static void
-assemble_two_insns (str, str2, parallel_p)
- char *str;
- char *str2;
- int parallel_p;
+assemble_two_insns (char *str1, char *str2, int parallel_p)
{
char *str3;
m32r_insn first;
char *errmsg;
char save_str2 = *str2;
- /* Seperate the two instructions. */
+ /* Separate the two instructions. */
*str2 = 0;
/* Make sure the two insns begin on a 32 bit boundary.
/* Parse the first instruction. */
if (! (first.insn = m32r_cgen_assemble_insn
- (gas_cgen_cpu_desc, str, & first.fields, first.buffer, & errmsg)))
+ (gas_cgen_cpu_desc, str1, & first.fields, first.buffer, & errmsg)))
{
- as_bad (errmsg);
+ as_bad ("%s", errmsg);
return;
}
if (CGEN_FIELDS_BITSIZE (&first.fields) != 16)
{
/* xgettext:c-format */
- as_bad (_("not a 16 bit instruction '%s'"), str);
+ as_bad (_("not a 16 bit instruction '%s'"), str1);
+ return;
+ }
+#ifdef E_M32R2_ARCH
+ else if ((enable_m32rx == 1)
+ /* FIXME: Need standard macro to perform this test. */
+ && ((CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_MACH)
+ & (1 << MACH_M32R2))
+ && !((CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_MACH)
+ & (1 << MACH_M32RX)))))
+ {
+ /* xgettext:c-format */
+ as_bad (_("instruction '%s' is for the M32R2 only"), str1);
return;
}
+ else if ((! enable_special
+ && CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_SPECIAL))
+ || (! enable_special_m32r
+ && CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_SPECIAL_M32R)))
+#else
else if (! enable_special
&& CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_SPECIAL))
+#endif
{
/* xgettext:c-format */
- as_bad (_("unknown instruction '%s'"), str);
+ as_bad (_("unknown instruction '%s'"), str1);
return;
}
else if (! enable_m32rx
== (1 << MACH_M32RX)))
{
/* xgettext:c-format */
- as_bad (_("instruction '%s' is for the M32RX only"), str);
+ as_bad (_("instruction '%s' is for the M32RX only"), str1);
return;
}
&& CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_PIPE) == PIPE_NONE)
{
/* xgettext:c-format */
- as_bad (_("instruction '%s' cannot be executed in parallel."), str);
+ as_bad (_("instruction '%s' cannot be executed in parallel."), str1);
return;
}
*str2 = save_str2;
/* Save the original string pointer. */
- str3 = str;
+ str3 = str1;
/* Advanced past the parsed string. */
- str = str2 + 2;
+ str1 = str2 + 2;
/* Remember the entire string in case it is needed for error
messages. */
/* Convert the opcode to lower case. */
{
- char *s2 = str;
+ char *s2 = str1;
- while (isspace (*s2++))
+ while (ISSPACE (*s2++))
continue;
--s2;
- while (isalnum (*s2))
+ while (ISALNUM (*s2))
{
- if (isupper ((unsigned char) *s2))
- *s2 = tolower (*s2);
+ *s2 = TOLOWER (*s2);
s2++;
}
}
/* Preserve any fixups that have been generated and reset the list
to empty. */
- gas_cgen_save_fixups ();
+ gas_cgen_save_fixups (0);
/* Get the indices of the operands of the instruction. */
/* FIXME: CGEN_FIELDS is already recorded, but relying on that fact
/* Parse the second instruction. */
if (! (second.insn = m32r_cgen_assemble_insn
- (gas_cgen_cpu_desc, str, & second.fields, second.buffer, & errmsg)))
+ (gas_cgen_cpu_desc, str1, & second.fields, second.buffer, & errmsg)))
{
- as_bad (errmsg);
+ as_bad ("%s", errmsg);
return;
}
if (CGEN_FIELDS_BITSIZE (&second.fields) != 16)
{
/* xgettext:c-format */
- as_bad (_("not a 16 bit instruction '%s'"), str);
+ as_bad (_("not a 16 bit instruction '%s'"), str1);
return;
}
+#ifdef E_M32R2_ARCH
+ else if ((enable_m32rx == 1)
+ /* FIXME: Need standard macro to perform this test. */
+ && ((CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_MACH)
+ & (1 << MACH_M32R2))
+ && !((CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_MACH)
+ & (1 << MACH_M32RX)))))
+ {
+ /* xgettext:c-format */
+ as_bad (_("instruction '%s' is for the M32R2 only"), str1);
+ return;
+ }
+ else if ((! enable_special
+ && CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_SPECIAL))
+ || (! enable_special_m32r
+ && CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_SPECIAL_M32R)))
+#else
else if (! enable_special
&& CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_SPECIAL))
+#endif
{
/* xgettext:c-format */
- as_bad (_("unknown instruction '%s'"), str);
+ as_bad (_("unknown instruction '%s'"), str1);
return;
}
else if (! enable_m32rx
&& CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_MACH) == (1 << MACH_M32RX))
{
/* xgettext:c-format */
- as_bad (_("instruction '%s' is for the M32RX only"), str);
+ as_bad (_("instruction '%s' is for the M32RX only"), str1);
return;
}
&& CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_PIPE) == PIPE_NONE)
{
/* xgettext:c-format */
- as_bad (_("instruction '%s' cannot be executed in parallel."), str);
+ as_bad (_("instruction '%s' cannot be executed in parallel."), str1);
return;
}
if (parallel_p && warn_explicit_parallel_conflicts)
{
- if (first_writes_to_seconds_operands (&first, &second, false))
+ if (first_writes_to_seconds_operands (&first, &second, FALSE))
/* xgettext:c-format */
as_warn (_("%s: output of 1st instruction is the same as an input to 2nd instruction - is this intentional ?"), str2);
- if (first_writes_to_seconds_operands (&second, &first, false))
+ if (first_writes_to_seconds_operands (&second, &first, FALSE))
/* xgettext:c-format */
as_warn (_("%s: output of 2nd instruction is the same as an input to 1st instruction - is this intentional ?"), str2);
}
|| (errmsg = (char *) can_make_parallel (&first, &second)) == NULL)
{
/* Get the fixups for the first instruction. */
- gas_cgen_swap_fixups ();
+ gas_cgen_swap_fixups (0);
/* Write it out. */
expand_debug_syms (first.debug_sym_link, 1);
make_parallel (second.buffer);
/* Get its fixups. */
- gas_cgen_restore_fixups ();
+ gas_cgen_restore_fixups (0);
/* Write it out. */
expand_debug_syms (second.debug_sym_link, 1);
make_parallel (first.buffer);
/* Get the fixups for the first instruction. */
- gas_cgen_restore_fixups ();
+ gas_cgen_restore_fixups (0);
/* Write out the first instruction. */
expand_debug_syms (first.debug_sym_link, 1);
return;
}
+ if (CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_SPECIAL)
+ || CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_SPECIAL))
+ m32r_flags |= E_M32R_HAS_HIDDEN_INST;
+ if (CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_SPECIAL_M32R)
+ || CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_SPECIAL_M32R))
+ m32r_flags |= E_M32R_HAS_BIT_INST;
+ if (CGEN_INSN_ATTR_VALUE (first.insn, CGEN_INSN_SPECIAL_FLOAT)
+ || CGEN_INSN_ATTR_VALUE (second.insn, CGEN_INSN_SPECIAL_FLOAT))
+ m32r_flags |= E_M32R_HAS_FLOAT_INST;
+
/* Set these so m32r_fill_insn can use them. */
prev_seg = now_seg;
prev_subseg = now_subseg;
}
void
-md_assemble (str)
- char *str;
+md_assemble (char *str)
{
m32r_insn insn;
char *errmsg;
/* Initialize GAS's cgen interface for a new instruction. */
gas_cgen_init_parse ();
- /* Look for a parallel instruction seperator. */
+ /* Look for a parallel instruction separator. */
if ((str2 = strstr (str, "||")) != NULL)
{
assemble_two_insns (str, str2, 1);
+ m32r_flags |= E_M32R_HAS_PARALLEL;
return;
}
- /* Also look for a sequential instruction seperator. */
+ /* Also look for a sequential instruction separator. */
if ((str2 = strstr (str, "->")) != NULL)
{
assemble_two_insns (str, str2, 0);
if (!insn.insn)
{
- as_bad (errmsg);
+ as_bad ("%s", errmsg);
return;
}
+#ifdef E_M32R2_ARCH
+ if ((enable_m32rx == 1)
+ /* FIXME: Need standard macro to perform this test. */
+ && ((CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_MACH)
+ & (1 << MACH_M32R2))
+ && !((CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_MACH)
+ & (1 << MACH_M32RX)))))
+ {
+ /* xgettext:c-format */
+ as_bad (_("instruction '%s' is for the M32R2 only"), str);
+ return;
+ }
+ else if ((! enable_special
+ && CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_SPECIAL))
+ || (! enable_special_m32r
+ && CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_SPECIAL_M32R)))
+#else
if (! enable_special
&& CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_SPECIAL))
+#endif
{
/* xgettext:c-format */
as_bad (_("unknown instruction '%s'"), str);
return;
}
+ if (CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_SPECIAL))
+ m32r_flags |= E_M32R_HAS_HIDDEN_INST;
+ if (CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_SPECIAL_M32R))
+ m32r_flags |= E_M32R_HAS_BIT_INST;
+ if (CGEN_INSN_ATTR_VALUE (insn.insn, CGEN_INSN_SPECIAL_FLOAT))
+ m32r_flags |= E_M32R_HAS_FLOAT_INST;
+
if (CGEN_INSN_BITSIZE (insn.insn) == 32)
{
/* 32 bit insns must live on 32 bit boundaries. */
else
{
int on_32bit_boundary_p;
- int swap = false;
+ int swap = FALSE;
if (CGEN_INSN_BITSIZE (insn.insn) != 16)
abort ();
prev_insn.insn is NULL when we're on a 32 bit boundary. */
on_32bit_boundary_p = prev_insn.insn == NULL;
+ /* Change a frag to, if each insn to swap is in a different frag.
+ It must keep only one instruction in a frag. */
+ if (parallel() && on_32bit_boundary_p)
+ {
+ frag_wane (frag_now);
+ frag_new (0);
+ }
+
/* Look to see if this instruction can be combined with the
previous instruction to make one, parallel, 32 bit instruction.
If the previous instruction (potentially) changed the flow of
Otherwise call can_make_parallel() with both orderings of the
instructions to see if they can be combined. */
if (! on_32bit_boundary_p
- && enable_m32rx
- && optimize
+ && parallel ()
&& CGEN_INSN_ATTR_VALUE (insn.orig_insn, CGEN_INSN_RELAXABLE) == 0
&& ! writes_to_pc (&prev_insn)
- && ! first_writes_to_seconds_operands (&prev_insn, &insn, false))
+ && ! first_writes_to_seconds_operands (&prev_insn, &insn, FALSE))
{
if (can_make_parallel (&prev_insn, &insn) == NULL)
make_parallel (insn.buffer);
else if (can_make_parallel (&insn, &prev_insn) == NULL)
- swap = true;
+ swap = TRUE;
}
expand_debug_syms (insn.debug_sym_link, 1);
else if (insn.frag->fr_opcode == insn.addr)
insn.frag->fr_opcode = prev_insn.addr;
- /* Update the addresses in any fixups.
- Note that we don't have to handle the case where each insn is in
- a different frag as we ensure they're in the same frag above. */
- for (i = 0; i < prev_insn.num_fixups; ++i)
- prev_insn.fixups[i]->fx_where += 2;
- for (i = 0; i < insn.num_fixups; ++i)
- insn.fixups[i]->fx_where -= 2;
+ /* Change a frag to, if each insn is in a different frag.
+ It must keep only one instruction in a frag. */
+ if (prev_insn.frag != insn.frag)
+ {
+ for (i = 0; i < prev_insn.num_fixups; ++i)
+ prev_insn.fixups[i]->fx_frag = insn.frag;
+ for (i = 0; i < insn.num_fixups; ++i)
+ insn.fixups[i]->fx_frag = prev_insn.frag;
+ }
+ else
+ {
+ /* Update the addresses in any fixups.
+ Note that we don't have to handle the case where each insn is in
+ a different frag as we ensure they're in the same frag above. */
+ for (i = 0; i < prev_insn.num_fixups; ++i)
+ prev_insn.fixups[i]->fx_where += 2;
+ for (i = 0; i < insn.num_fixups; ++i)
+ insn.fixups[i]->fx_where -= 2;
+ }
}
/* Keep track of whether we've seen a pair of 16 bit insns.
We just ignore it. */
void
-md_operand (expressionP)
- expressionS *expressionP;
+md_operand (expressionS *expressionP)
{
if (*input_line_pointer == '#')
{
}
valueT
-md_section_align (segment, size)
- segT segment;
- valueT size;
+md_section_align (segT segment, valueT size)
{
- int align = bfd_get_section_alignment (stdoutput, segment);
- return ((size + (1 << align) - 1) & (-1 << align));
+ int align = bfd_section_alignment (segment);
+
+ return ((size + (1 << align) - 1) & -(1 << align));
}
symbolS *
-md_undefined_symbol (name)
- char *name;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
correctly link the object file. */
static void
-m32r_scomm (ignore)
- int ignore;
+m32r_scomm (int ignore ATTRIBUTE_UNUSED)
{
- register char *name;
- register char c;
- register char *p;
+ char *name;
+ char c;
+ char *p;
offsetT size;
- register symbolS *symbolP;
+ symbolS *symbolP;
offsetT align;
int align2;
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
/* Just after name is now '\0'. */
p = input_line_pointer;
*p = c;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE_AFTER_NAME ();
if (*input_line_pointer != ',')
{
as_bad (_("Expected comma after symbol-name: rest of line ignored."));
demand_empty_rest_of_line ();
}
+
+/* The target specific pseudo-ops which we support. */
+const pseudo_typeS md_pseudo_table[] =
+{
+ { "word", cons, 4 },
+ { "fillinsn", fill_insn, 0 },
+ { "scomm", m32r_scomm, 0 },
+ { "debugsym", debug_sym, 0 },
+ { "m32r", allow_m32rx, 0 },
+ { "m32rx", allow_m32rx, 1 },
+ { "m32r2", allow_m32rx, 2 },
+ { "little", little, 1 },
+ { "big", little, 0 },
+ { NULL, NULL, 0 }
+};
\f
/* Interface to relax_segment. */
};
long
-m32r_relax_frag (segment, fragP, stretch)
- segT segment;
- fragS *fragP;
- long stretch;
+m32r_relax_frag (segT segment, fragS *fragP, long stretch)
{
/* Address of branch insn. */
long address = fragP->fr_address + fragP->fr_fix - 2;
with a 0 value. */
int
-md_estimate_size_before_relax (fragP, segment)
- fragS *fragP;
- segT segment;
+md_estimate_size_before_relax (fragS *fragP, segT segment)
{
- int old_fr_fix = fragP->fr_fix;
-
/* The only thing we have to handle here are symbols outside of the
current segment. They may be undefined or in a different segment in
which case linker scripts may place them anywhere.
However, we can't finish the fragment here and emit the reloc as insn
alignment requirements may move the insn about. */
-
- if (S_GET_SEGMENT (fragP->fr_symbol) != segment)
+ if (S_GET_SEGMENT (fragP->fr_symbol) != segment
+ || S_IS_EXTERNAL (fragP->fr_symbol)
+ || S_IS_WEAK (fragP->fr_symbol))
{
/* The symbol is undefined in this segment.
Change the relaxation subtype to the max allowable and leave
all further handling to md_convert_frag. */
fragP->fr_subtype = 2;
-#if 0
- /* Can't use this, but leave in for illustration. */
- /* Change 16 bit insn to 32 bit insn. */
- fragP->fr_opcode[0] |= 0x80;
-
- /* Increase known (fixed) size of fragment. */
- fragP->fr_fix += 2;
-
- /* Create a relocation for it. */
- fix_new (fragP, old_fr_fix, 4,
- fragP->fr_symbol,
- fragP->fr_offset, 1 /* pcrel */,
- /* FIXME: Can't use a real BFD reloc here.
- gas_cgen_md_apply_fix3 can't handle it. */
- BFD_RELOC_M32R_26_PCREL);
-
- /* Mark this fragment as finished. */
- frag_wane (fragP);
-#else
{
const CGEN_INSN *insn;
int i;
if ((strcmp (CGEN_INSN_MNEMONIC (insn),
CGEN_INSN_MNEMONIC (fragP->fr_cgen.insn))
== 0)
- && CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_RELAX))
+ && CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_RELAXED))
break;
}
if (i == 4)
fragP->fr_cgen.insn = insn;
return 2;
}
-#endif
}
- return (fragP->fr_var + fragP->fr_fix - old_fr_fix);
+ return md_relax_table[fragP->fr_subtype].rlx_length;
}
/* *FRAGP has been relaxed to its final size, and now needs to have
fragP->fr_subtype is the subtype of what the address relaxed to. */
void
-md_convert_frag (abfd, sec, fragP)
- bfd *abfd;
- segT sec;
- fragS *fragP;
+md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
+ segT sec,
+ fragS *fragP)
{
char *opcode;
char *displacement;
abort ();
}
- if (S_GET_SEGMENT (fragP->fr_symbol) != sec)
+ if (S_GET_SEGMENT (fragP->fr_symbol) != sec
+ || S_IS_EXTERNAL (fragP->fr_symbol)
+ || S_IS_WEAK (fragP->fr_symbol))
{
/* Symbol must be resolved by linker. */
if (fragP->fr_offset & 3)
as_warn (_("Addend to unresolved symbol not on word boundary."));
- addend = fragP->fr_offset >> 2;
+#ifdef USE_M32R_OLD_RELOC
+ addend = fragP->fr_offset >> 2; /* Old M32R used USE_REL. */
+#else
+ addend = 0;
+#endif
}
else
{
/* Address we want to reach in file space. */
target_address = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset;
- target_address += symbol_get_frag (fragP->fr_symbol)->fr_address;
addend = (target_address - (opcode_address & -4)) >> 2;
}
/* Create a relocation for symbols that must be resolved by the linker.
Otherwise output the completed insn. */
- if (S_GET_SEGMENT (fragP->fr_symbol) != sec)
- {
- assert (fragP->fr_subtype != 1);
- assert (fragP->fr_cgen.insn != 0);
- gas_cgen_record_fixup (fragP,
- /* Offset of branch insn in frag. */
- fragP->fr_fix + extension - 4,
- fragP->fr_cgen.insn,
- 4 /* Length. */,
- /* FIXME: quick hack. */
-#if 0
- cgen_operand_lookup_by_num (gas_cgen_cpu_desc,
- fragP->fr_cgen.opindex),
-#else
- cgen_operand_lookup_by_num (gas_cgen_cpu_desc,
- M32R_OPERAND_DISP24),
-#endif
- fragP->fr_cgen.opinfo,
- fragP->fr_symbol, fragP->fr_offset);
+ if (S_GET_SEGMENT (fragP->fr_symbol) != sec
+ || S_IS_EXTERNAL (fragP->fr_symbol)
+ || S_IS_WEAK (fragP->fr_symbol))
+ {
+ fixS *fixP;
+
+ gas_assert (fragP->fr_subtype != 1);
+ gas_assert (fragP->fr_cgen.insn != 0);
+
+ fixP = gas_cgen_record_fixup (fragP,
+ /* Offset of branch insn in frag. */
+ fragP->fr_fix + extension - 4,
+ fragP->fr_cgen.insn,
+ 4 /* Length. */,
+ /* FIXME: quick hack. */
+ cgen_operand_lookup_by_num (gas_cgen_cpu_desc,
+ M32R_OPERAND_DISP24),
+ fragP->fr_cgen.opinfo,
+ fragP->fr_symbol, fragP->fr_offset);
+ if (fragP->fr_cgen.opinfo)
+ fixP->fx_r_type = fragP->fr_cgen.opinfo;
}
#define SIZE_FROM_RELAX_STATE(n) ((n) == 1 ? 1 : 3)
given a PC relative reloc. */
long
-md_pcrel_from_section (fixP, sec)
- fixS *fixP;
- segT sec;
+md_pcrel_from_section (fixS *fixP, segT sec)
{
if (fixP->fx_addsy != (symbolS *) NULL
&& (! S_IS_DEFINED (fixP->fx_addsy)
- || S_GET_SEGMENT (fixP->fx_addsy) != sec))
+ || S_GET_SEGMENT (fixP->fx_addsy) != sec
+ || S_IS_EXTERNAL (fixP->fx_addsy)
+ || S_IS_WEAK (fixP->fx_addsy)))
{
+ if (S_GET_SEGMENT (fixP->fx_addsy) != sec
+ && S_IS_DEFINED (fixP->fx_addsy)
+ && ! S_IS_EXTERNAL (fixP->fx_addsy)
+ && ! S_IS_WEAK (fixP->fx_addsy))
+ return fixP->fx_offset;
+
/* The symbol is undefined (or is defined but not in this section).
Let the linker figure it out. */
return 0;
*FIXP may be modified if desired. */
bfd_reloc_code_real_type
-md_cgen_lookup_reloc (insn, operand, fixP)
- const CGEN_INSN *insn;
- const CGEN_OPERAND *operand;
- fixS *fixP;
+md_cgen_lookup_reloc (const CGEN_INSN *insn ATTRIBUTE_UNUSED,
+ const CGEN_OPERAND *operand,
+ fixS *fixP)
{
switch (operand->type)
{
/* Record a HI16 reloc for later matching with its LO16 cousin. */
static void
-m32r_record_hi16 (reloc_type, fixP, seg)
- int reloc_type;
- fixS *fixP;
- segT seg;
+m32r_record_hi16 (int reloc_type,
+ fixS *fixP,
+ segT seg ATTRIBUTE_UNUSED)
{
struct m32r_hi_fixup *hi_fixup;
- assert (reloc_type == BFD_RELOC_M32R_HI16_SLO
+ gas_assert (reloc_type == BFD_RELOC_M32R_HI16_SLO
|| reloc_type == BFD_RELOC_M32R_HI16_ULO);
- hi_fixup = ((struct m32r_hi_fixup *)
- xmalloc (sizeof (struct m32r_hi_fixup)));
+ hi_fixup = XNEW (struct m32r_hi_fixup);
hi_fixup->fixp = fixP;
hi_fixup->seg = now_seg;
hi_fixup->next = m32r_hi_fixup_list;
We need to check for HI16 relocs and queue them up for later sorting. */
fixS *
-m32r_cgen_record_fixup_exp (frag, where, insn, length, operand, opinfo, exp)
- fragS *frag;
- int where;
- const CGEN_INSN *insn;
- int length;
- const CGEN_OPERAND *operand;
- int opinfo;
- expressionS *exp;
+m32r_cgen_record_fixup_exp (fragS *frag,
+ int where,
+ const CGEN_INSN *insn,
+ int length,
+ const CGEN_OPERAND *operand,
+ int opinfo,
+ expressionS *exp)
{
- fixS *fixP = gas_cgen_record_fixup_exp (frag, where, insn, length,
- operand, opinfo, exp);
+ fixS *fixP;
+ bfd_reloc_code_real_type r_type = BFD_RELOC_UNUSED;
+
+ if (m32r_check_fixup (exp, &r_type))
+ as_bad (_("Invalid PIC expression."));
+
+ fixP = gas_cgen_record_fixup_exp (frag, where, insn, length,
+ operand, opinfo, exp);
switch (operand->type)
{
|| fixP->fx_cgen.opinfo == BFD_RELOC_M32R_HI16_ULO)
m32r_record_hi16 (fixP->fx_cgen.opinfo, fixP, now_seg);
break;
+
+ default:
+ /* Avoid -Wall warning. */
+ break;
+ }
+
+ switch (r_type)
+ {
+ case BFD_RELOC_UNUSED:
default:
- /* Avoid -Wall warning */
+ return fixP;
+
+ case BFD_RELOC_M32R_GOTPC24:
+ if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_HI16_SLO)
+ r_type = BFD_RELOC_M32R_GOTPC_HI_SLO;
+ else if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_HI16_ULO)
+ r_type = BFD_RELOC_M32R_GOTPC_HI_ULO;
+ else if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_LO16)
+ r_type = BFD_RELOC_M32R_GOTPC_LO;
+ break;
+
+ case BFD_RELOC_M32R_GOT24:
+ if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_HI16_SLO)
+ r_type = BFD_RELOC_M32R_GOT16_HI_SLO;
+ else if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_HI16_ULO)
+ r_type = BFD_RELOC_M32R_GOT16_HI_ULO;
+ else if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_LO16)
+ r_type = BFD_RELOC_M32R_GOT16_LO;
+ break;
+
+ case BFD_RELOC_M32R_GOTOFF:
+ if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_HI16_SLO)
+ r_type = BFD_RELOC_M32R_GOTOFF_HI_SLO;
+ else if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_HI16_ULO)
+ r_type = BFD_RELOC_M32R_GOTOFF_HI_ULO;
+ else if (fixP->fx_cgen.opinfo == BFD_RELOC_M32R_LO16)
+ r_type = BFD_RELOC_M32R_GOTOFF_LO;
+ break;
+
+ case BFD_RELOC_M32R_26_PLTREL:
+ as_bad (_("Invalid PIC expression."));
break;
}
+ fixP->fx_r_type = r_type;
+
return fixP;
}
tc_gen_reloc. */
void
-m32r_frob_file ()
+m32r_frob_file (void)
{
struct m32r_hi_fixup *l;
segment_info_type *seginfo;
int pass;
- assert (FX_OPINFO_R_TYPE (l->fixp) == BFD_RELOC_M32R_HI16_SLO
+ gas_assert (FX_OPINFO_R_TYPE (l->fixp) == BFD_RELOC_M32R_HI16_SLO
|| FX_OPINFO_R_TYPE (l->fixp) == BFD_RELOC_M32R_HI16_ULO);
/* Check quickly whether the next fixup happens to be a matching low. */
for (pf = &seginfo->fix_root;
*pf != l->fixp;
pf = & (*pf)->fx_next)
- assert (*pf != NULL);
+ gas_assert (*pf != NULL);
*pf = l->fixp->fx_next;
relaxing. */
int
-m32r_force_relocation (fix)
- fixS *fix;
+m32r_force_relocation (fixS *fix)
{
- if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT
- || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ if (generic_force_reloc (fix))
return 1;
if (! m32r_relax)
/* Write a value out to the object file, using the appropriate endianness. */
void
-md_number_to_chars (buf, val, n)
- char *buf;
- valueT val;
- int n;
+md_number_to_chars (char *buf, valueT val, int n)
{
if (target_big_endian)
number_to_chars_bigendian (buf, val, n);
of LITTLENUMS emitted is stored in *SIZEP. An error message is
returned, or NULL on OK. */
-/* Equal to MAX_PRECISION in atof-ieee.c. */
-#define MAX_LITTLENUMS 6
-
-char *
-md_atof (type, litP, sizeP)
- char type;
- char *litP;
- int *sizeP;
+const char *
+md_atof (int type, char *litP, int *sizeP)
{
- int i;
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- char *t;
- char *atof_ieee ();
-
- switch (type)
- {
- case 'f':
- case 'F':
- case 's':
- case 'S':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- case 'r':
- case 'R':
- prec = 4;
- break;
-
- /* FIXME: Some targets allow other format chars for bigger sizes
- here. */
-
- default:
- *sizeP = 0;
- return _("Bad call to md_atof()");
- }
-
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
- *sizeP = prec * sizeof (LITTLENUM_TYPE);
-
- if (target_big_endian)
- {
- for (i = 0; i < prec; i++)
- {
- md_number_to_chars (litP, (valueT) words[i],
- sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
- }
- }
- else
- {
- for (i = prec - 1; i >= 0; i--)
- {
- md_number_to_chars (litP, (valueT) words[i],
- sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
- }
- }
-
- return 0;
+ return ieee_md_atof (type, litP, sizeP, target_big_endian);
}
void
-m32r_elf_section_change_hook ()
+m32r_elf_section_change_hook (void)
{
/* If we have reached the end of a section and we have just emitted a
16 bit insn, then emit a nop to make sure that the section ends on
/* Return true if can adjust the reloc to be relative to its section
(such as .data) instead of relative to some symbol. */
-boolean
-m32r_fix_adjustable (fixP)
- fixS *fixP;
+bfd_boolean
+m32r_fix_adjustable (fixS *fixP)
{
-
bfd_reloc_code_real_type reloc_type;
if ((int) fixP->fx_r_type >= (int) BFD_RELOC_UNUSED)
int opindex = (int) fixP->fx_r_type - (int) BFD_RELOC_UNUSED;
const CGEN_OPERAND *operand =
cgen_operand_lookup_by_num(gas_cgen_cpu_desc, opindex);
+
reloc_type = md_cgen_lookup_reloc (insn, operand, fixP);
}
else
return 1;
/* Prevent all adjustments to global symbols. */
- if (S_IS_EXTERN (fixP->fx_addsy))
+ if (S_IS_EXTERNAL (fixP->fx_addsy))
return 0;
if (S_IS_WEAK (fixP->fx_addsy))
return 0;
+ if (pic_code
+ && (reloc_type == BFD_RELOC_M32R_24
+ || reloc_type == BFD_RELOC_M32R_26_PCREL
+ || reloc_type == BFD_RELOC_M32R_HI16_SLO
+ || reloc_type == BFD_RELOC_M32R_HI16_ULO
+ || reloc_type == BFD_RELOC_M32R_LO16))
+ return 0;
+
+ if (reloc_type == BFD_RELOC_M32R_GOT24
+ || reloc_type == BFD_RELOC_M32R_26_PLTREL
+ || reloc_type == BFD_RELOC_M32R_GOTPC_HI_SLO
+ || reloc_type == BFD_RELOC_M32R_GOTPC_HI_ULO
+ || reloc_type == BFD_RELOC_M32R_GOTPC_LO
+ || reloc_type == BFD_RELOC_M32R_GOT16_HI_SLO
+ || reloc_type == BFD_RELOC_M32R_GOT16_HI_ULO
+ || reloc_type == BFD_RELOC_M32R_GOT16_LO)
+ return 0;
+
/* We need the symbol name for the VTABLE entries. */
if (reloc_type == BFD_RELOC_VTABLE_INHERIT
|| reloc_type == BFD_RELOC_VTABLE_ENTRY)
return 1;
}
+
+void
+m32r_elf_final_processing (void)
+{
+ if (use_parallel)
+ m32r_flags |= E_M32R_HAS_PARALLEL;
+ elf_elfheader (stdoutput)->e_flags |= m32r_flags;
+}
+
+/* Translate internal representation of relocation info to BFD target
+ format. */
+
+arelent *
+tc_gen_reloc (asection * section, fixS * fixP)
+{
+ arelent * reloc;
+ bfd_reloc_code_real_type code;
+
+ reloc = XNEW (arelent);
+
+ reloc->sym_ptr_ptr = XNEW (asymbol *);
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy);
+ reloc->address = fixP->fx_frag->fr_address + fixP->fx_where;
+
+ if (fixP->fx_pcrel)
+ {
+ if (fixP->fx_r_type == BFD_RELOC_32)
+ fixP->fx_r_type = BFD_RELOC_32_PCREL;
+ else if (fixP->fx_r_type == BFD_RELOC_16)
+ {
+ fixP->fx_r_type = BFD_RELOC_16_PCREL;
+ bfd_set_error (bfd_error_bad_value);
+ }
+ }
+
+ code = fixP->fx_r_type;
+ if (pic_code)
+ {
+#ifdef DEBUG_PIC
+printf("%s",bfd_get_reloc_code_name(code));
+#endif
+ switch (code)
+ {
+ case BFD_RELOC_M32R_26_PCREL:
+ code = BFD_RELOC_M32R_26_PLTREL;
+ break;
+
+ case BFD_RELOC_M32R_24:
+ if (fixP->fx_addsy != NULL
+ && strcmp (S_GET_NAME (fixP->fx_addsy), GOT_NAME) == 0)
+ code = BFD_RELOC_M32R_GOTPC24;
+ else
+ code = BFD_RELOC_M32R_GOT24;
+ break;
+
+ case BFD_RELOC_M32R_HI16_ULO:
+ if (fixP->fx_addsy != NULL
+ && strcmp (S_GET_NAME (fixP->fx_addsy), GOT_NAME) == 0)
+ code = BFD_RELOC_M32R_GOTPC_HI_ULO;
+ else
+ code = BFD_RELOC_M32R_GOT16_HI_ULO;
+ break;
+
+ case BFD_RELOC_M32R_HI16_SLO:
+ if (fixP->fx_addsy != NULL
+ && strcmp (S_GET_NAME (fixP->fx_addsy), GOT_NAME) == 0)
+ code = BFD_RELOC_M32R_GOTPC_HI_SLO;
+ else
+ code = BFD_RELOC_M32R_GOT16_HI_SLO;
+ break;
+
+ case BFD_RELOC_M32R_LO16:
+ if (fixP->fx_addsy != NULL
+ && strcmp (S_GET_NAME (fixP->fx_addsy), GOT_NAME) == 0)
+ code = BFD_RELOC_M32R_GOTPC_LO;
+ else
+ code = BFD_RELOC_M32R_GOT16_LO;
+ break;
+
+ default:
+ break;
+ }
+#ifdef DEBUG_PIC
+printf(" => %s",bfd_get_reloc_code_name(code));
+#endif
+ }
+
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
+
+#ifdef DEBUG_PIC
+printf(" => %s\n",reloc->howto->name);
+#endif
+
+ if (reloc->howto == (reloc_howto_type *) NULL)
+ {
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("internal error: can't export reloc type %d (`%s')"),
+ fixP->fx_r_type, bfd_get_reloc_code_name (code));
+ return NULL;
+ }
+
+ /* Use fx_offset for these cases. */
+ if ( fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixP->fx_r_type == BFD_RELOC_32_PCREL)
+ reloc->addend = fixP->fx_offset;
+ else if ((!pic_code
+ && code != BFD_RELOC_M32R_26_PLTREL)
+ && fixP->fx_pcrel
+ && fixP->fx_addsy != NULL
+ && (S_GET_SEGMENT(fixP->fx_addsy) != section)
+ && S_IS_DEFINED (fixP->fx_addsy)
+ && ! S_IS_EXTERNAL(fixP->fx_addsy)
+ && ! S_IS_WEAK(fixP->fx_addsy))
+ /* Already used fx_offset in the opcode field itself. */
+ reloc->addend = fixP->fx_offset;
+ else
+ reloc->addend = fixP->fx_addnumber;
+
+ return reloc;
+}
+
+inline static char *
+m32r_end_of_match (char *cont, const char *what)
+{
+ int len = strlen (what);
+
+ if (strncasecmp (cont, what, strlen (what)) == 0
+ && ! is_part_of_name (cont[len]))
+ return cont + len;
+
+ return NULL;
+}
+
+int
+m32r_parse_name (char const *name,
+ expressionS *exprP,
+ enum expr_mode mode,
+ char *nextcharP)
+{
+ char *next = input_line_pointer;
+ char *next_end;
+ int reloc_type;
+ operatorT op_type;
+ segT segment;
+
+ exprP->X_op_symbol = NULL;
+ exprP->X_md = BFD_RELOC_UNUSED;
+
+ if (strcmp (name, GOT_NAME) == 0)
+ {
+ if (! GOT_symbol)
+ GOT_symbol = symbol_find_or_make (name);
+
+ exprP->X_add_symbol = GOT_symbol;
+ no_suffix:
+ /* If we have an absolute symbol or a
+ reg, then we know its value now. */
+ segment = S_GET_SEGMENT (exprP->X_add_symbol);
+ if (mode != expr_defer && segment == absolute_section)
+ {
+ exprP->X_op = O_constant;
+ exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol);
+ exprP->X_add_symbol = NULL;
+ }
+ else if (mode != expr_defer && segment == reg_section)
+ {
+ exprP->X_op = O_register;
+ exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol);
+ exprP->X_add_symbol = NULL;
+ }
+ else
+ {
+ exprP->X_op = O_symbol;
+ exprP->X_add_number = 0;
+ }
+
+ return 1;
+ }
+
+ exprP->X_add_symbol = symbol_find_or_make (name);
+
+ if (*nextcharP != '@')
+ goto no_suffix;
+ else if ((next_end = m32r_end_of_match (next + 1, "GOTOFF")))
+ {
+ reloc_type = BFD_RELOC_M32R_GOTOFF;
+ op_type = O_PIC_reloc;
+ }
+ else if ((next_end = m32r_end_of_match (next + 1, "GOT")))
+ {
+ reloc_type = BFD_RELOC_M32R_GOT24;
+ op_type = O_PIC_reloc;
+ }
+ else if ((next_end = m32r_end_of_match (next + 1, "PLT")))
+ {
+ reloc_type = BFD_RELOC_M32R_26_PLTREL;
+ op_type = O_PIC_reloc;
+ }
+ else
+ goto no_suffix;
+
+ *input_line_pointer = *nextcharP;
+ input_line_pointer = next_end;
+ *nextcharP = *input_line_pointer;
+ *input_line_pointer = '\0';
+
+ exprP->X_op = op_type;
+ exprP->X_add_number = 0;
+ exprP->X_md = reloc_type;
+
+ return 1;
+}
+
+int
+m32r_cgen_parse_fix_exp(int opinfo, expressionS *exp)
+{
+ if (exp->X_op == O_PIC_reloc
+ && exp->X_md == BFD_RELOC_M32R_26_PLTREL)
+ {
+ exp->X_op = O_symbol;
+ opinfo = exp->X_md;
+ }
+
+ return opinfo;
+}