/* tc-mcore.c -- Assemble code for M*Core
-
- Copyright (C) 1993,1994, 1999 Free Software Foundation.
+ Copyright (C) 1999-2015 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
-#include <stdio.h>
#include "as.h"
-#include "bfd.h"
#include "subsegs.h"
#define DEFINE_TABLE
#include "../opcodes/mcore-opc.h"
-#include <ctype.h>
-#include <string.h>
+#include "safe-ctype.h"
#ifdef OBJ_ELF
#include "elf/mcore.h"
#endif
/* Forward declarations for dumb compilers. */
-static void mcore_s_literals PARAMS ((int));
-static void mcore_cons PARAMS ((int));
-static void mcore_float_cons PARAMS ((int));
-static void mcore_stringer PARAMS ((int));
-static int log2 PARAMS ((unsigned int));
-static char * parse_reg PARAMS ((char *, unsigned *));
-static char * parse_creg PARAMS ((char *, unsigned *));
-static char * parse_exp PARAMS ((char *, expressionS *));
-static void make_name PARAMS ((char *, char *, int));
-static int enter_literal PARAMS ((expressionS *, int));
-static char * parse_rt PARAMS ((char *, char **, int, expressionS *));
-static char * parse_imm PARAMS ((char *, unsigned *, unsigned, unsigned));
-static char * parse_mem PARAMS ((char *, unsigned *, unsigned *, unsigned));
-static void dump_literals PARAMS ((int));
-static void check_literals PARAMS ((int, int));
-static void mcore_s_text PARAMS ((int));
-static void mcore_s_data PARAMS ((int));
-#ifdef OBJ_ELF
-static void mcore_s_section PARAMS ((int));
-#endif
/* Several places in this file insert raw instructions into the
object. They should use MCORE_INST_XXX macros to get the opcodes
and then use these two macros to crack the MCORE_INST value into
the appropriate byte values. */
-#define INST_BYTE0(x) (((x) >> 8) & 0xFF)
-#define INST_BYTE1(x) ((x) & 0xFF)
+#define INST_BYTE0(x) (target_big_endian ? (((x) >> 8) & 0xFF) : ((x) & 0xFF))
+#define INST_BYTE1(x) (target_big_endian ? ((x) & 0xFF) : (((x) >> 8) & 0xFF))
const char comment_chars[] = "#/";
const char line_separator_chars[] = ";";
const char line_comment_chars[] = "#/";
-const int md_reloc_size = 8;
-
-static int do_jsri2bsr = 0; /* change here from 1 by Cruess 19 August 97 */
+static int do_jsri2bsr = 0; /* Change here from 1 by Cruess 19 August 97. */
static int sifilter_mode = 0;
const char EXP_CHARS[] = "eE";
-/* Chars that mean this number is a floating point constant */
-/* As in 0f12.456 */
-/* or 0d1.2345e12 */
+/* Chars that mean this number is a floating point constant
+ As in 0f12.456
+ or 0d1.2345e12 */
const char FLT_CHARS[] = "rRsSfFdDxXpP";
#define C(what,length) (((what) << 2) + (length))
#define GET_WHAT(x) ((x >> 2))
-/* These are the two types of relaxable instruction */
+/* These are the two types of relaxable instruction. */
#define COND_JUMP 1
#define UNCD_JUMP 2
#define UNDEF_DISP 0
-#define COND12 1
-#define COND32 2
-#define UNCD12 1
-#define UNCD32 2
-#define UNDEF_WORD_DISP 4
-#define END 5
+#define DISP12 1
+#define DISP32 2
+#define UNDEF_WORD_DISP 3
#define C12_LEN 2
-#define C32_LEN 10 /* allow for align */
+#define C32_LEN 10 /* Allow for align. */
#define U12_LEN 2
-#define U32_LEN 8 /* allow for align */
+#define U32_LEN 8 /* Allow for align. */
+
+typedef enum
+{
+ M210,
+ M340
+}
+cpu_type;
+cpu_type cpu = M340;
-/* Initialize the relax table */
+/* Initialize the relax table. */
const relax_typeS md_relax_table[] =
{
-{ 1, 1, 0, 0 }, /* 0: unused */
-{ 1, 1, 0, 0 }, /* 1: unused */
-{ 1, 1, 0, 0 }, /* 2: unused */
-{ 1, 1, 0, 0 }, /* 3: unused */
-{ 1, 1, 0, 0 }, /* 4: unused */
-{ 2048, -2046, C12_LEN, C(COND_JUMP, COND32) }, /* 5: C(COND_JUMP, COND12) */
-{ 0, 0, C32_LEN, 0 }, /* 6: C(COND_JUMP, COND32) */
-{ 1, 1, 0, 0 }, /* 7: unused */
-{ 1, 1, 0, 0 }, /* 8: unused */
-{ 2048, -2046, U12_LEN, C(UNCD_JUMP, UNCD32) }, /* 9: C(UNCD_JUMP, UNCD12) */
-{ 0, 0, U32_LEN, 0 }, /*10: C(UNCD_JUMP, UNCD32) */
-{ 1, 1, 0, 0 }, /*11: unused */
-{ 0, 0, 0, 0 } /*12: unused */
+ { 0, 0, 0, 0 },
+ { 0, 0, 0, 0 },
+ { 0, 0, 0, 0 },
+ { 0, 0, 0, 0 },
+
+ /* COND_JUMP */
+ { 0, 0, 0, 0 }, /* UNDEF_DISP */
+ { 2048, -2046, C12_LEN, C(COND_JUMP, DISP32) }, /* DISP12 */
+ { 0, 0, C32_LEN, 0 }, /* DISP32 */
+ { 0, 0, C32_LEN, 0 }, /* UNDEF_WORD_DISP */
+
+ /* UNCD_JUMP */
+ { 0, 0, 0, 0 }, /* UNDEF_DISP */
+ { 2048, -2046, U12_LEN, C(UNCD_JUMP, DISP32) }, /* DISP12 */
+ { 0, 0, U32_LEN, 0 }, /* DISP32 */
+ { 0, 0, U32_LEN, 0 } /* UNDEF_WORD_DISP */
+
};
-/* LITERAL POOL DATA STRUCTURES */
+/* Literal pool data structures. */
struct literal
{
unsigned short refcnt;
-- so we have to be smaller than 1018 and since we deal with 2-byte
instructions, the next good choice is 1016.
-- Note we have a test case that fails when we've got 1018 here. */
-#define SPANPANIC (1016) /* 1024 - 1 entry - 2 byte rounding */
+#define SPANPANIC (1016) /* 1024 - 1 entry - 2 byte rounding. */
#define SPANCLOSE (900)
#define SPANEXIT (600)
-static symbolS * poolsym; /* label for current pool */
+static symbolS * poolsym; /* Label for current pool. */
static char poolname[8];
-static struct hash_control * opcode_hash_control; /* Opcode mnemonics */
+static struct hash_control * opcode_hash_control; /* Opcode mnemonics. */
-/* This table describes all the machine specific pseudo-ops the assembler
- has to support. The fields are:
- Pseudo-op name without dot
- Function to call to execute this pseudo-op
- Integer arg to pass to the function */
-const pseudo_typeS md_pseudo_table[] =
+#define POOL_END_LABEL ".LE"
+#define POOL_START_LABEL ".LS"
+
+static void
+make_name (char * s, char * p, int n)
{
- { "export", s_globl, 0 },
- { "import", s_ignore, 0 },
- { "literals", mcore_s_literals, 0 },
- { "page", listing_eject, 0 },
- { "bss", s_lcomm_bytes, 1 },
+ static const char hex[] = "0123456789ABCDEF";
- /* The following are to intercept the placement of data into the text
- section (eg addresses for a switch table), so that the space they
- occupy can be taken into account when deciding whether or not to
- dump the current literal pool.
- XXX - currently we do not cope with the .space and .dcb.d directives. */
- { "ascii", mcore_stringer, 0 },
- { "asciz", mcore_stringer, 1 },
- { "byte", mcore_cons, 1 },
- { "dc", mcore_cons, 2 },
- { "dc.b", mcore_cons, 1 },
- { "dc.d", mcore_float_cons, 'd' },
- { "dc.l", mcore_cons, 4 },
- { "dc.s", mcore_float_cons, 'f' },
- { "dc.w", mcore_cons, 2 },
- { "dc.x", mcore_float_cons, 'x' },
- { "double", mcore_float_cons, 'd'},
- { "float", mcore_float_cons, 'f'},
- { "hword", mcore_cons, 2 },
- { "int", mcore_cons, 4 },
- { "long", mcore_cons, 4 },
- { "octa", mcore_cons, 16 },
- { "quad", mcore_cons, 8 },
- { "short", mcore_cons, 2 },
- { "single", mcore_float_cons, 'f'},
- { "string", mcore_stringer, 1 },
- { "word", mcore_cons, 2 },
+ s[0] = p[0];
+ s[1] = p[1];
+ s[2] = p[2];
+ s[3] = hex[(n >> 12) & 0xF];
+ s[4] = hex[(n >> 8) & 0xF];
+ s[5] = hex[(n >> 4) & 0xF];
+ s[6] = hex[(n) & 0xF];
+ s[7] = 0;
+}
- /* Allow for the effect of section changes. */
- { "text", mcore_s_text, 0 },
- { "data", mcore_s_data, 0 },
-
-#ifdef OBJ_ELF
- { "section", mcore_s_section, 0 },
- { "section.s", mcore_s_section, 0 },
- { "sect", mcore_s_section, 0 },
- { "sect.s", mcore_s_section, 0 },
-#endif
- { 0, 0, 0 }
-};
+static void
+dump_literals (int isforce)
+{
+ unsigned int i;
+ struct literal * p;
+ symbolS * brarsym = NULL;
+
+ if (poolsize == 0)
+ return;
+
+ /* Must we branch around the literal table? */
+ if (isforce)
+ {
+ char * output;
+ char brarname[8];
+
+ make_name (brarname, POOL_END_LABEL, poolnumber);
+
+ brarsym = symbol_make (brarname);
+
+ symbol_table_insert (brarsym);
+
+ output = frag_var (rs_machine_dependent,
+ md_relax_table[C (UNCD_JUMP, DISP32)].rlx_length,
+ md_relax_table[C (UNCD_JUMP, DISP12)].rlx_length,
+ C (UNCD_JUMP, 0), brarsym, 0, 0);
+ output[0] = INST_BYTE0 (MCORE_INST_BR); /* br .+xxx */
+ output[1] = INST_BYTE1 (MCORE_INST_BR);
+ }
+
+ /* Make sure that the section is sufficiently aligned and that
+ the literal table is aligned within it. */
+ record_alignment (now_seg, 2);
+ frag_align (2, 0, 0);
+
+ colon (S_GET_NAME (poolsym));
+
+ for (i = 0, p = litpool; i < poolsize; i++, p++)
+ emit_expr (& p->e, 4);
+
+ if (brarsym != NULL)
+ colon (S_GET_NAME (brarsym));
+
+ poolsize = 0;
+}
static void
-mcore_s_literals (ignore)
- int ignore;
+mcore_s_literals (int ignore ATTRIBUTE_UNUSED)
{
dump_literals (0);
demand_empty_rest_of_line ();
}
+/* Perform FUNC (ARG), and track number of bytes added to frag. */
static void
-mcore_cons (nbytes)
- int nbytes;
+mcore_pool_count (void (*func) (int), int arg)
{
- if (now_seg == text_section)
+ const fragS *curr_frag = frag_now;
+ offsetT added = -frag_now_fix_octets ();
+
+ (*func) (arg);
+
+ while (curr_frag != frag_now)
{
- char * ptr = input_line_pointer;
- int commas = 1;
-
- /* Count the number of commas on the line. */
- while (! is_end_of_line [* ptr])
- commas += * ptr ++ == ',';
-
- poolspan += nbytes * commas;
+ added += curr_frag->fr_fix;
+ curr_frag = curr_frag->fr_next;
}
-
- cons (nbytes);
+
+ added += frag_now_fix_octets ();
+ poolspan += added;
+}
+
+static void
+check_literals (int kind, int offset)
+{
+ poolspan += offset;
+
+ /* SPANCLOSE and SPANEXIT are smaller numbers than SPANPANIC.
+ SPANPANIC means that we must dump now.
+ kind == 0 is any old instruction.
+ kind > 0 means we just had a control transfer instruction.
+ kind == 1 means within a function
+ kind == 2 means we just left a function
+
+ The dump_literals (1) call inserts a branch around the table, so
+ we first look to see if its a situation where we won't have to
+ insert a branch (e.g., the previous instruction was an unconditional
+ branch).
+
+ SPANPANIC is the point where we must dump a single-entry pool.
+ it accounts for alignments and an inserted branch.
+ the 'poolsize*2' accounts for the scenario where we do:
+ lrw r1,lit1; lrw r2,lit2; lrw r3,lit3
+ Note that the 'lit2' reference is 2 bytes further along
+ but the literal it references will be 4 bytes further along,
+ so we must consider the poolsize into this equation.
+ This is slightly over-cautious, but guarantees that we won't
+ panic because a relocation is too distant. */
+
+ if (poolspan > SPANCLOSE && kind > 0)
+ dump_literals (0);
+ else if (poolspan > SPANEXIT && kind > 1)
+ dump_literals (0);
+ else if (poolspan >= (SPANPANIC - poolsize * 2))
+ dump_literals (1);
+}
+
+static void
+mcore_cons (int nbytes)
+{
+ if (now_seg == text_section)
+ mcore_pool_count (cons, nbytes);
+ else
+ cons (nbytes);
/* In theory we ought to call check_literals (2,0) here in case
we need to dump the literal table. We cannot do this however,
as the directives that we are intercepting may be being used
to build a switch table, and we must not interfere with its
- contents. Instead we cross our fingers and pray... */
+ contents. Instead we cross our fingers and pray... */
}
static void
-mcore_float_cons (float_type)
- int float_type;
+mcore_float_cons (int float_type)
{
if (now_seg == text_section)
- {
- char * ptr = input_line_pointer;
- int commas = 1;
-
-#ifdef REPEAT_CONS_EXPRESSIONS
-#error REPEAT_CONS_EXPRESSIONS not handled
-#endif
-
- /* Count the number of commas on the line. */
- while (! is_end_of_line [* ptr])
- commas += * ptr ++ == ',';
-
- /* We would like to compute "hex_float (float_type) * commas"
- but hex_float is not exported from read.c */
- float_type == 'f' ? 4 : (float_type == 'd' ? 8 : 12);
- poolspan += float_type * commas;
- }
+ mcore_pool_count (float_cons, float_type);
+ else
+ float_cons (float_type);
- float_cons (float_type);
-
/* See the comment in mcore_cons () about calling check_literals.
It is unlikely that a switch table will be constructed using
floating point values, but it is still likely that an indexed
}
static void
-mcore_stringer (append_zero)
- int append_zero;
+mcore_stringer (int append_zero)
{
if (now_seg == text_section)
- {
- char * ptr = input_line_pointer;
-
- /* In theory we should compute how many bytes are going to
- be occupied by the string(s) and add this to the poolspan.
- To keep things simple however, we just add the number of
- bytes left on the current line. This will be an over-
- estimate, which is OK, and automatically allows for the
- appending a zero byte, since the real string(s) is/are
- required to be enclosed in double quotes. */
- while (! is_end_of_line [* ptr])
- ptr ++;
-
- poolspan += ptr - input_line_pointer;
- }
-
- stringer (append_zero);
+ mcore_pool_count (stringer, append_zero);
+ else
+ stringer (append_zero);
/* We call check_literals here in case a large number of strings are
being placed into the text section with a sequence of stringer
}
static void
-mcore_s_text (ignore)
- int ignore;
+mcore_fill (int unused)
+{
+ if (now_seg == text_section)
+ mcore_pool_count (s_fill, unused);
+ else
+ s_fill (unused);
+
+ check_literals (2, 0);
+}
+
+/* Handle the section changing pseudo-ops. These call through to the
+ normal implementations, but they dump the literal pool first. */
+
+static void
+mcore_s_text (int ignore)
{
dump_literals (0);
-
+
+#ifdef OBJ_ELF
+ obj_elf_text (ignore);
+#else
s_text (ignore);
+#endif
}
static void
-mcore_s_data (ignore)
- int ignore;
+mcore_s_data (int ignore)
{
dump_literals (0);
-
+
+#ifdef OBJ_ELF
+ obj_elf_data (ignore);
+#else
s_data (ignore);
+#endif
}
+static void
+mcore_s_section (int ignore)
+{
+ /* Scan forwards to find the name of the section. If the section
+ being switched to is ".line" then this is a DWARF1 debug section
+ which is arbitrarily placed inside generated code. In this case
+ do not dump the literal pool because it is a) inefficient and
+ b) would require the generation of extra code to jump around the
+ pool. */
+ char * ilp = input_line_pointer;
+
+ while (*ilp != 0 && ISSPACE (*ilp))
+ ++ ilp;
+
+ if (strncmp (ilp, ".line", 5) == 0
+ && (ISSPACE (ilp[5]) || *ilp == '\n' || *ilp == '\r'))
+ ;
+ else
+ dump_literals (0);
+
+#ifdef OBJ_ELF
+ obj_elf_section (ignore);
+#endif
+#ifdef OBJ_COFF
+ obj_coff_section (ignore);
+#endif
+}
+
+static void
+mcore_s_bss (int needs_align)
+{
+ dump_literals (0);
+
+ s_lcomm_bytes (needs_align);
+}
+
+#ifdef OBJ_ELF
+static void
+mcore_s_comm (int needs_align)
+{
+ dump_literals (0);
+
+ obj_elf_common (needs_align);
+}
+#endif
+
+/* This table describes all the machine specific pseudo-ops the assembler
+ has to support. The fields are:
+ Pseudo-op name without dot
+ Function to call to execute this pseudo-op
+ Integer arg to pass to the function. */
+const pseudo_typeS md_pseudo_table[] =
+{
+ { "export", s_globl, 0 },
+ { "import", s_ignore, 0 },
+ { "literals", mcore_s_literals, 0 },
+ { "page", listing_eject, 0 },
+
+ /* The following are to intercept the placement of data into the text
+ section (eg addresses for a switch table), so that the space they
+ occupy can be taken into account when deciding whether or not to
+ dump the current literal pool.
+ XXX - currently we do not cope with the .space and .dcb.d directives. */
+ { "ascii", mcore_stringer, 8 + 0 },
+ { "asciz", mcore_stringer, 8 + 1 },
+ { "byte", mcore_cons, 1 },
+ { "dc", mcore_cons, 2 },
+ { "dc.b", mcore_cons, 1 },
+ { "dc.d", mcore_float_cons, 'd'},
+ { "dc.l", mcore_cons, 4 },
+ { "dc.s", mcore_float_cons, 'f'},
+ { "dc.w", mcore_cons, 2 },
+ { "dc.x", mcore_float_cons, 'x'},
+ { "double", mcore_float_cons, 'd'},
+ { "float", mcore_float_cons, 'f'},
+ { "hword", mcore_cons, 2 },
+ { "int", mcore_cons, 4 },
+ { "long", mcore_cons, 4 },
+ { "octa", mcore_cons, 16 },
+ { "quad", mcore_cons, 8 },
+ { "short", mcore_cons, 2 },
+ { "single", mcore_float_cons, 'f'},
+ { "string", mcore_stringer, 8 + 1 },
+ { "word", mcore_cons, 2 },
+ { "fill", mcore_fill, 0 },
+
+ /* Allow for the effect of section changes. */
+ { "text", mcore_s_text, 0 },
+ { "data", mcore_s_data, 0 },
+ { "bss", mcore_s_bss, 1 },
+#ifdef OBJ_ELF
+ { "comm", mcore_s_comm, 0 },
+#endif
+ { "section", mcore_s_section, 0 },
+ { "section.s", mcore_s_section, 0 },
+ { "sect", mcore_s_section, 0 },
+ { "sect.s", mcore_s_section, 0 },
+
+ { 0, 0, 0 }
+};
+
/* This function is called once, at assembler startup time. This should
- set up all the tables, etc that the MD part of the assembler needs. */
+ set up all the tables, etc that the MD part of the assembler needs. */
+
void
-md_begin ()
+md_begin (void)
{
- mcore_opcode_info * opcode;
+ const mcore_opcode_info * opcode;
char * prev_name = "";
opcode_hash_control = hash_new ();
- /* Insert unique names into hash table */
+ /* Insert unique names into hash table. */
for (opcode = mcore_table; opcode->name; opcode ++)
{
- if (streq (prev_name, opcode->name))
- {
- /* Make all the opcodes with the same name point to the same
- string. */
- opcode->name = prev_name;
- }
- else
+ if (! streq (prev_name, opcode->name))
{
prev_name = opcode->name;
hash_insert (opcode_hash_control, opcode->name, (char *) opcode);
}
}
-static int reg_m;
-static int reg_n;
-static expressionS immediate; /* absolute expression */
-
/* Get a log2(val). */
+
static int
-log2 (val)
- unsigned int val;
+mylog2 (unsigned int val)
{
- int log = -1;
- while (val != 0)
+ int log = -1;
+
+ while (val != 0)
{
- log ++;
- val >>= 1;
+ log ++;
+ val >>= 1;
}
-
- return log;
+
+ return log;
}
/* Try to parse a reg name. */
+
static char *
-parse_reg (s, reg)
- char * s;
- unsigned * reg;
+parse_reg (char * s, unsigned * reg)
{
/* Strip leading whitespace. */
- while (isspace (* s))
+ while (ISSPACE (* s))
++ s;
-
- if (tolower (s[0]) == 'r')
+
+ if (TOLOWER (s[0]) == 'r')
{
if (s[1] == '1' && s[2] >= '0' && s[2] <= '5')
{
*reg = 10 + s[2] - '0';
return s + 3;
}
-
+
if (s[1] >= '0' && s[1] <= '9')
{
*reg = s[1] - '0';
return s + 2;
}
}
- else if ( tolower (s[0]) == 's'
- && tolower (s[1]) == 'p'
- && ! isalnum (s[2]))
+ else if ( TOLOWER (s[0]) == 's'
+ && TOLOWER (s[1]) == 'p'
+ && ! ISALNUM (s[2]))
{
* reg = 0;
return s + 2;
}
-
+
as_bad (_("register expected, but saw '%.6s'"), s);
return s;
}
};
static char *
-parse_creg (s, reg)
- char * s;
- unsigned * reg;
+parse_creg (char * s, unsigned * reg)
{
int i;
/* Strip leading whitespace. */
- while (isspace (* s))
+ while (ISSPACE (* s))
++s;
-
- if ((tolower (s[0]) == 'c' && tolower (s[1]) == 'r'))
+
+ if ((TOLOWER (s[0]) == 'c' && TOLOWER (s[1]) == 'r'))
{
if (s[2] == '3' && s[3] >= '0' && s[3] <= '1')
{
*reg = 30 + s[3] - '0';
return s + 4;
}
-
+
if (s[2] == '2' && s[3] >= '0' && s[3] <= '9')
{
*reg = 20 + s[3] - '0';
return s + 4;
}
-
+
if (s[2] == '1' && s[3] >= '0' && s[3] <= '9')
{
*reg = 10 + s[3] - '0';
return s + 4;
}
-
+
if (s[2] >= '0' && s[2] <= '9')
{
*reg = s[2] - '0';
return s + 3;
}
}
-
+
/* Look at alternate creg names before giving error. */
for (i = 0; cregs[i].name[0] != '\0'; i++)
{
char buf [10];
int length;
int j;
-
+
length = strlen (cregs[i].name);
-
+
for (j = 0; j < length; j++)
- buf[j] = tolower (s[j]);
-
+ buf[j] = TOLOWER (s[j]);
+
if (strncmp (cregs[i].name, buf, length) == 0)
{
*reg = cregs[i].crnum;
return s + length;
}
}
-
+
as_bad (_("control register expected, but saw '%.6s'"), s);
-
+
return s;
}
static char *
-parse_exp (s, e)
- char * s;
- expressionS * e;
+parse_psrmod (char * s, unsigned * reg)
+{
+ int i;
+ char buf[10];
+ static struct psrmods
+ {
+ char * name;
+ unsigned int value;
+ }
+ psrmods[] =
+ {
+ { "ie", 1 },
+ { "fe", 2 },
+ { "ee", 4 },
+ { "af", 8 } /* Really 0 and non-combinable. */
+ };
+
+ for (i = 0; i < 2; i++)
+ buf[i] = TOLOWER (s[i]);
+
+ for (i = sizeof (psrmods) / sizeof (psrmods[0]); i--;)
+ {
+ if (! strncmp (psrmods[i].name, buf, 2))
+ {
+ * reg = psrmods[i].value;
+
+ return s + 2;
+ }
+ }
+
+ as_bad (_("bad/missing psr specifier"));
+
+ * reg = 0;
+
+ return s;
+}
+
+static char *
+parse_exp (char * s, expressionS * e)
{
char * save;
- char * new;
+ char * new_pointer;
/* Skip whitespace. */
- while (isspace (* s))
+ while (ISSPACE (* s))
++ s;
-
+
save = input_line_pointer;
input_line_pointer = s;
expression (e);
-
+
if (e->X_op == O_absent)
as_bad (_("missing operand"));
-
- new = input_line_pointer;
- input_line_pointer = save;
-
- return new;
-}
-static void
-make_name (s, p, n)
- char * s;
- char * p;
- int n;
-{
- static const char hex[] = "0123456789ABCDEF";
-
- s[0] = p[0];
- s[1] = p[1];
- s[2] = p[2];
- s[3] = hex[(n >> 12) & 0xF];
- s[4] = hex[(n >> 8) & 0xF];
- s[5] = hex[(n >> 4) & 0xF];
- s[6] = hex[(n) & 0xF];
- s[7] = 0;
-}
-
-#define POOL_END_LABEL ".LE"
-#define POOL_START_LABEL ".LS"
-
-static void
-dump_literals (isforce)
- int isforce;
-{
- int i;
- struct literal * p;
- symbolS * brarsym;
-
- if (poolsize == 0)
- return;
-
- /* Must we branch around the literal table? */
- if (isforce)
- {
- char * output;
- char brarname[8];
-
- make_name (brarname, POOL_END_LABEL, poolnumber);
-
- brarsym = symbol_make (brarname);
-
- symbol_table_insert (brarsym);
-
- output = frag_var (rs_machine_dependent,
- md_relax_table[C (UNCD_JUMP, UNCD32)].rlx_length,
- md_relax_table[C (UNCD_JUMP, UNCD12)].rlx_length,
- C (UNCD_JUMP, 0), brarsym, 0, 0);
- output[0] = INST_BYTE0 (MCORE_INST_BR); /* br .+xxx */
- output[1] = INST_BYTE1 (MCORE_INST_BR);
- }
-
- /* Make sure that the section is sufficiently aligned and that
- the literal table is aligned within it. */
- record_alignment (now_seg, 2);
- frag_align (2, 0, 0);
-
- colon (S_GET_NAME (poolsym));
-
- for (i = 0, p = litpool; i < poolsize; i++, p++)
- emit_expr (& p->e, 4);
-
- if (isforce)
- colon (S_GET_NAME (brarsym));
-
- poolsize = 0;
-}
+ new_pointer = input_line_pointer;
+ input_line_pointer = save;
-static void
-check_literals (kind, offset)
- int kind;
- int offset;
-{
- poolspan += offset;
-
- /* SPANCLOSE and SPANEXIT are smaller numbers than SPANPANIC.
- SPANPANIC means that we must dump now.
- kind == 0 is any old instruction.
- kind > 0 means we just had a control transfer instruction.
- kind == 1 means within a function
- kind == 2 means we just left a function
-
- The dump_literals (1) call inserts a branch around the table, so
- we first look to see if its a situation where we won't have to
- insert a branch (e.g., the previous instruction was an unconditional
- branch).
-
- SPANPANIC is the point where we must dump a single-entry pool.
- it accounts for alignments and an inserted branch.
- the 'poolsize*2' accounts for the scenario where we do:
- lrw r1,lit1; lrw r2,lit2; lrw r3,lit3
- Note that the 'lit2' reference is 2 bytes further along
- but the literal it references will be 4 bytes further along,
- so we must consider the poolsize into this equation.
- This is slightly over-cautious, but guarantees that we won't
- panic because a relocation is too distant. */
-
- if (poolspan > SPANCLOSE && kind > 0)
- dump_literals (0);
- else if (poolspan > SPANEXIT && kind > 1)
- dump_literals (0);
- else if (poolspan >= (SPANPANIC - poolsize * 2))
- dump_literals (1);
+ return new_pointer;
}
static int
-enter_literal (e, ispcrel)
- expressionS * e;
- int ispcrel;
+enter_literal (expressionS * e, int ispcrel)
{
- int i;
+ unsigned int i;
struct literal * p;
if (poolsize >= MAX_POOL_SIZE - 2)
- {
- /* The literal pool is as full as we can handle. We have
- to be 2 entries shy of the 1024/4=256 entries because we
- have to allow for the branch (2 bytes) and the alignment
- (2 bytes before the first insn referencing the pool and
- 2 bytes before the pool itself) == 6 bytes, rounds up
- to 2 entries. */
- dump_literals (1);
- }
+ /* The literal pool is as full as we can handle. We have
+ to be 2 entries shy of the 1024/4=256 entries because we
+ have to allow for the branch (2 bytes) and the alignment
+ (2 bytes before the first insn referencing the pool and
+ 2 bytes before the pool itself) == 6 bytes, rounds up
+ to 2 entries. */
+ dump_literals (1);
if (poolsize == 0)
{
/* Create new literal pool. */
if (++ poolnumber > 0xFFFF)
as_fatal (_("more than 65K literal pools"));
-
+
make_name (poolname, POOL_START_LABEL, poolnumber);
poolsym = symbol_make (poolname);
symbol_table_insert (poolsym);
poolspan = 0;
}
-
+
/* Search pool for value so we don't have duplicates. */
for (p = litpool, i = 0; i < poolsize; i++, p++)
{
p->refcnt = 1;
p->ispcrel = ispcrel;
p->e = * e;
-
+
poolsize ++;
- return i;
+ return i;
}
/* Parse a literal specification. -- either new or old syntax.
old syntax: the user supplies the label and places the literal.
new syntax: we put it into the literal pool. */
+
static char *
-parse_rt (s, outputp, ispcrel, ep)
- char * s;
- char ** outputp;
- int ispcrel;
- expressionS * ep;
+parse_rt (char * s,
+ char ** outputp,
+ int ispcrel,
+ expressionS * ep)
{
expressionS e;
int n;
-
+
if (ep)
/* Indicate nothing there. */
ep->X_op = O_absent;
-
+
if (*s == '[')
{
s = parse_exp (s + 1, & e);
-
+
if (*s == ']')
s++;
else
else
{
s = parse_exp (s, & e);
-
+
n = enter_literal (& e, ispcrel);
-
+
if (ep)
*ep = e;
e.X_add_symbol = poolsym;
e.X_add_number = n << 2;
}
-
+
* outputp = frag_more (2);
fix_new_exp (frag_now, (*outputp) - frag_now->fr_literal, 2, & e, 1,
}
static char *
-parse_imm (s, val, min, max)
- char * s;
- unsigned * val;
- unsigned min;
- unsigned max;
+parse_imm (char * s,
+ unsigned * val,
+ unsigned min,
+ unsigned max)
{
- char * new;
+ char * new_pointer;
expressionS e;
-
- new = parse_exp (s, & e);
-
+
+ new_pointer = parse_exp (s, & e);
+
if (e.X_op == O_absent)
; /* An error message has already been emitted. */
else if (e.X_op != O_constant)
as_bad (_("operand must be a constant"));
- else if (e.X_add_number < min || e.X_add_number > max)
- as_bad (_("operand must be absolute in range %d..%d, not %d"),
- min, max, e.X_add_number);
+ else if ((addressT) e.X_add_number < min || (addressT) e.X_add_number > max)
+ as_bad (_("operand must be absolute in range %u..%u, not %ld"),
+ min, max, (long) e.X_add_number);
* val = e.X_add_number;
-
- return new;
+
+ return new_pointer;
}
static char *
-parse_mem (s, reg, off, siz)
- char * s;
- unsigned * reg;
- unsigned * off;
- unsigned siz;
+parse_mem (char * s,
+ unsigned * reg,
+ unsigned * off,
+ unsigned siz)
{
- char * new;
-
* off = 0;
-
- while (isspace (* s))
+
+ while (ISSPACE (* s))
++ s;
-
+
if (* s == '(')
{
s = parse_reg (s + 1, reg);
- while (isspace (* s))
+ while (ISSPACE (* s))
++ s;
-
+
if (* s == ',')
{
s = parse_imm (s + 1, off, 0, 63);
-
+
if (siz > 1)
{
if (siz > 2)
{
if (* off & 0x3)
as_bad (_("operand must be a multiple of 4"));
-
+
* off >>= 2;
}
else
{
if (* off & 0x1)
as_bad (_("operand must be a multiple of 2"));
-
+
* off >>= 1;
}
}
}
-
- while (isspace (* s))
+
+ while (ISSPACE (* s))
++ s;
-
+
if (* s == ')')
s ++;
}
else
as_bad (_("base register expected"));
-
+
return s;
}
the frags/bytes it assembles to. */
void
-md_assemble (str)
- char * str;
+md_assemble (char * str)
{
char * op_start;
char * op_end;
unsigned off;
unsigned isize;
expressionS e;
- char name[20];
+ char name[21];
/* Drop leading whitespace. */
- while (isspace (* str))
+ while (ISSPACE (* str))
str ++;
/* Find the op code end. */
for (op_start = op_end = str;
- * op_end && nlen < 20 && !is_end_of_line [*op_end] && *op_end != ' ';
+ nlen < 20 && !is_end_of_line [(unsigned char) *op_end] && *op_end != ' ';
op_end++)
{
name[nlen] = op_start[nlen];
nlen++;
}
-
+
name [nlen] = 0;
-
+
if (nlen == 0)
{
as_bad (_("can't find opcode "));
as_bad (_("unknown opcode \"%s\""), name);
return;
}
-
+
inst = opcode->inst;
isize = 2;
-
+
switch (opcode->opclass)
{
case O0:
output = frag_more (2);
break;
-
+
case OT:
op_end = parse_imm (op_end + 1, & reg, 0, 3);
inst |= reg;
output = frag_more (2);
break;
-
+
case O1:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
output = frag_more (2);
break;
-
+
case JMP:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
output = frag_more (2);
/* In a sifilter mode, we emit this insn 2 times,
- fixes problem of an interrupt during a jmp.. */
+ fixes problem of an interrupt during a jmp.. */
if (sifilter_mode)
{
output[0] = INST_BYTE0 (inst);
output = frag_more (2);
}
break;
-
+
case JSR:
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg == 15)
as_bad (_("invalid register: r15 illegal"));
-
+
inst |= reg;
output = frag_more (2);
-
+
if (sifilter_mode)
{
- /* Replace with: bsr .+2 ; addi r15,6; jmp rx ; jmp rx */
- inst = MCORE_INST_BSR; /* with 0 displacement */
+ /* Replace with: bsr .+2 ; addi r15,6; jmp rx ; jmp rx. */
+ inst = MCORE_INST_BSR; /* With 0 displacement. */
output[0] = INST_BYTE0 (inst);
output[1] = INST_BYTE1 (inst);
output = frag_more (2);
inst = MCORE_INST_ADDI;
- inst |= 15; /* addi r15,6 */
- inst |= (6 - 1) << 4; /* over the jmp's */
+ inst |= 15; /* addi r15,6 */
+ inst |= (6 - 1) << 4; /* Over the jmp's. */
output[0] = INST_BYTE0 (inst);
output[1] = INST_BYTE1 (inst);
output[0] = INST_BYTE0 (inst);
output[1] = INST_BYTE1 (inst);
- output = frag_more (2); /* 2nd emitted in fallthru */
+ /* 2nd emitted in fallthrough. */
+ output = frag_more (2);
}
break;
-
+
case OC:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (*op_end == ',')
{
op_end = parse_creg (op_end + 1, & reg);
inst |= reg << 4;
}
-
+
output = frag_more (2);
break;
+ case MULSH:
+ if (cpu == M210)
+ {
+ as_bad (_("M340 specific opcode used when assembling for M210"));
+ break;
+ }
+ /* drop through... */
case O2:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_reg (op_end + 1, & reg);
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
- case X1: /* Handle both syntax-> xtrb- r1,rx OR xtrb- rx */
+
+ case X1:
+ /* Handle both syntax-> xtrb- r1,rx OR xtrb- rx. */
op_end = parse_reg (op_end + 1, & reg);
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
- if (* op_end == ',') /* xtrb- r1,rx */
+
+ if (* op_end == ',') /* xtrb- r1,rx. */
{
if (reg != 1)
as_bad (_("destination register must be r1"));
-
+
op_end = parse_reg (op_end + 1, & reg);
}
-
+
inst |= reg;
output = frag_more (2);
break;
-
- case O1R1: /* div- rx,r1 */
+
+ case O1R1: /* div- rx,r1. */
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_reg (op_end + 1, & reg);
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case OI:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 32);
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case OB:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 0, 31);
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
- case OB2: /* like OB, but arg is 2^n instead of n */
+
+ case OB2:
+ /* Like OB, but arg is 2^n instead of n. */
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 1 << 31);
- /* Further restrict the immediate to a power of two. */
+ /* Further restrict the immediate to a power of two. */
if ((reg & (reg - 1)) == 0)
- reg = log2 (reg);
+ reg = mylog2 (reg);
else
{
reg = 0;
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
- case OBRa: /* Specific for bgeni: imm of 0->6 translate to movi. */
+
+ case OBRa: /* Specific for bgeni: imm of 0->6 translate to movi. */
case OBRb:
case OBRc:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 0, 31);
- /* immediate values of 0 -> 6 translate to movi */
+ /* Immediate values of 0 -> 6 translate to movi. */
if (reg <= 6)
{
inst = (inst & 0xF) | MCORE_INST_BGENI_ALT;
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
- case OBR2: /* like OBR, but arg is 2^n instead of n */
+
+ case OBR2: /* Like OBR, but arg is 2^n instead of n. */
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 1 << 31);
-
+
/* Further restrict the immediate to a power of two. */
if ((reg & (reg - 1)) == 0)
- reg = log2 (reg);
+ reg = mylog2 (reg);
else
{
reg = 0;
as_bad (_("immediate is not a power of two"));
}
-
- /* Immediate values of 0 -> 6 translate to movi. */
+
+ /* Immediate values of 0 -> 6 translate to movi. */
if (reg <= 6)
{
inst = (inst & 0xF) | MCORE_INST_BGENI_ALT;
reg = 0x1 << reg;
as_warn (_("translating mgeni to movi"));
}
-
+
inst |= reg << 4;
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case OMa: /* Specific for bmaski: imm 1->7 translate to movi. */
case OMb:
case OMc:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 32);
-
- /* Immediate values of 1 -> 7 translate to movi. */
+
+ /* Immediate values of 1 -> 7 translate to movi. */
if (reg <= 7)
{
inst = (inst & 0xF) | MCORE_INST_BMASKI_ALT;
reg = (0x1 << reg) - 1;
inst |= reg << 4;
-
+
as_warn (_("translating bmaski to movi"));
}
else
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case SI:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 31);
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
case I7:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 0, 0x7F);
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case LS:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg << 8;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
int size;
-
+
if ((inst & 0x6000) == 0)
size = 4;
else if ((inst & 0x6000) == 0x4000)
size = 2;
else if ((inst & 0x6000) == 0x2000)
size = 1;
-
+ else
+ abort ();
+
op_end = parse_mem (op_end + 1, & reg, & off, size);
-
+
if (off > 16)
as_bad (_("displacement too large (%d)"), off);
else
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case LR:
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg == 0 || reg == 15)
as_bad (_("Invalid register: r0 and r15 illegal"));
-
+
inst |= (reg << 8);
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
- /* parse_rt calls frag_more() for us. */
- input_line_pointer = parse_rt (op_end + 1, & output, 0, 0);
+ {
+ /* parse_rt calls frag_more() for us. */
+ input_line_pointer = parse_rt (op_end + 1, & output, 0, 0);
+ op_end = input_line_pointer;
+ }
else
{
as_bad (_("second operand missing"));
output = frag_more (2); /* save its space */
}
break;
-
+
case LJ:
input_line_pointer = parse_rt (op_end + 1, & output, 1, 0);
/* parse_rt() calls frag_more() for us. */
+ op_end = input_line_pointer;
break;
-
+
case RM:
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg == 0 || reg == 15)
as_bad (_("bad starting register: r0 and r15 invalid"));
-
+
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == '-')
{
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg != 15)
as_bad (_("ending register must be r15"));
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
}
-
+
if (* op_end == ',')
{
op_end ++;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == '(')
{
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg != 0)
as_bad (_("bad base register: must be r0"));
-
+
if (* op_end == ')')
op_end ++;
}
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case RQ:
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg != 4)
as_fatal (_("first register must be r4"));
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == '-')
{
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg != 7)
as_fatal (_("last register must be r7"));
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end ++;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == '(')
{
op_end = parse_reg (op_end + 1, & reg);
-
+
if (reg >= 4 && reg <= 7)
as_fatal ("base register cannot be r4, r5, r6, or r7");
-
+
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ')')
op_end ++;
}
}
else
as_bad (_("reg-reg expected"));
-
+
output = frag_more (2);
break;
-
+
case BR:
input_line_pointer = parse_exp (op_end + 1, & e);
-
+ op_end = input_line_pointer;
+
output = frag_more (2);
-
- fix_new_exp (frag_now, output-frag_now->fr_literal,
+
+ fix_new_exp (frag_now, output-frag_now->fr_literal,
2, & e, 1, BFD_RELOC_MCORE_PCREL_IMM11BY2);
break;
-
+
case BL:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg << 4;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_exp (op_end + 1, & e);
output = frag_more (2);
-
- fix_new_exp (frag_now, output-frag_now->fr_literal,
+
+ fix_new_exp (frag_now, output-frag_now->fr_literal,
2, & e, 1, BFD_RELOC_MCORE_PCREL_IMM4BY2);
}
else
output = frag_more (2);
}
break;
-
+
case JC:
input_line_pointer = parse_exp (op_end + 1, & e);
-
+ op_end = input_line_pointer;
+
output = frag_var (rs_machine_dependent,
- md_relax_table[C (COND_JUMP, COND32)].rlx_length,
- md_relax_table[C (COND_JUMP, COND12)].rlx_length,
+ md_relax_table[C (COND_JUMP, DISP32)].rlx_length,
+ md_relax_table[C (COND_JUMP, DISP12)].rlx_length,
C (COND_JUMP, 0), e.X_add_symbol, e.X_add_number, 0);
isize = C32_LEN;
break;
-
+
case JU:
input_line_pointer = parse_exp (op_end + 1, & e);
+ op_end = input_line_pointer;
+
output = frag_var (rs_machine_dependent,
- md_relax_table[C (UNCD_JUMP, UNCD32)].rlx_length,
- md_relax_table[C (UNCD_JUMP, UNCD12)].rlx_length,
+ md_relax_table[C (UNCD_JUMP, DISP32)].rlx_length,
+ md_relax_table[C (UNCD_JUMP, DISP12)].rlx_length,
C (UNCD_JUMP, 0), e.X_add_symbol, e.X_add_number, 0);
isize = U32_LEN;
break;
-
+
case JL:
inst = MCORE_INST_JSRI; /* jsri */
input_line_pointer = parse_rt (op_end + 1, & output, 1, & e);
- /* parse_rt() calls frag_more for us */
-
- /* Only do this if we know how to do it ... */
+ /* parse_rt() calls frag_more for us. */
+ op_end = input_line_pointer;
+
+ /* Only do this if we know how to do it ... */
if (e.X_op != O_absent && do_jsri2bsr)
{
/* Look at adding the R_PCREL_JSRIMM11BY2. */
- fix_new_exp (frag_now, output-frag_now->fr_literal,
+ fix_new_exp (frag_now, output-frag_now->fr_literal,
2, & e, 1, BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2);
}
break;
- case RSI: /* SI, but imm becomes 32-imm */
+ case RSI:
+ /* SI, but imm becomes 32-imm. */
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 31);
-
+
reg = 32 - reg;
inst |= reg << 4;
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case DO21: /* O2, dup rd, lit must be 1 */
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
inst |= reg << 4;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 31);
-
+
if (reg != 1)
as_bad (_("second operand must be 1"));
}
else
as_bad (_("second operand missing"));
-
+
output = frag_more (2);
break;
-
+
case SIa:
op_end = parse_reg (op_end + 1, & reg);
inst |= reg;
-
+
/* Skip whitespace. */
- while (isspace (* op_end))
+ while (ISSPACE (* op_end))
++ op_end;
-
+
if (* op_end == ',')
{
op_end = parse_imm (op_end + 1, & reg, 1, 31);
if (reg == 0)
as_bad (_("zero used as immediate value"));
-
+
inst |= reg << 4;
}
else
as_bad (_("second operand missing"));
-
+
+ output = frag_more (2);
+ break;
+
+ case OPSR:
+ if (cpu == M210)
+ {
+ as_bad (_("M340 specific opcode used when assembling for M210"));
+ break;
+ }
+
+ op_end = parse_psrmod (op_end + 1, & reg);
+
+ /* Look for further selectors. */
+ while (* op_end == ',')
+ {
+ unsigned value;
+
+ op_end = parse_psrmod (op_end + 1, & value);
+
+ if (value & reg)
+ as_bad (_("duplicated psr bit specifier"));
+
+ reg |= value;
+ }
+
+ if (reg > 8)
+ as_bad (_("`af' must appear alone"));
+
+ inst |= (reg & 0x7);
output = frag_more (2);
break;
default:
as_bad (_("unimplemented opcode \"%s\""), name);
}
-
+
+ /* Drop whitespace after all the operands have been parsed. */
+ while (ISSPACE (* op_end))
+ op_end ++;
+
+ /* Give warning message if the insn has more operands than required. */
+ if (strcmp (op_end, opcode->name) && strcmp (op_end, ""))
+ as_warn (_("ignoring operands: %s "), op_end);
+
output[0] = INST_BYTE0 (inst);
output[1] = INST_BYTE1 (inst);
-
+
check_literals (opcode->transfer, isize);
}
symbolS *
-md_undefined_symbol (name)
- char * name;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
void
-md_mcore_end ()
+md_mcore_end (void)
{
dump_literals (0);
subseg_set (text_section, 0);
}
/* Various routines to kill one day. */
-/* Equal to MAX_PRECISION in atof-ieee.c */
-#define MAX_LITTLENUMS 6
-/* Turn a string in input_line_pointer into a floating point constant of type
- type, and store the appropriate bytes in *litP. The number of LITTLENUMS
- emitted is stored in *sizeP. An error message is returned, or NULL on OK.*/
char *
-md_atof (type, litP, sizeP)
- int type;
- char * litP;
- int * sizeP;
+md_atof (int type, char * litP, int * sizeP)
{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- int i;
- char * t;
- char * atof_ieee ();
-
- switch (type)
- {
- case 'f':
- case 'F':
- case 's':
- case 'S':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- case 'r':
- case 'R':
- prec = 4;
- break;
-
- case 'x':
- case 'X':
- prec = 6;
- break;
-
- case 'p':
- case 'P':
- prec = 6;
- break;
-
- default:
- *sizeP = 0;
- return _("Bad call to MD_NTOF()");
- }
-
- t = atof_ieee (input_line_pointer, type, words);
-
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * sizeof (LITTLENUM_TYPE);
-
- for (i = 0; i < prec; i++)
- {
- md_number_to_chars (litP, (valueT) words[i],
- sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
- }
-
- return 0;
+ return ieee_md_atof (type, litP, sizeP, target_big_endian);
}
\f
-CONST char * md_shortopts = "";
+const char * md_shortopts = "";
-#define OPTION_JSRI2BSR_ON (OPTION_MD_BASE + 0)
-#define OPTION_JSRI2BSR_OFF (OPTION_MD_BASE + 1)
-#define OPTION_SIFILTER_ON (OPTION_MD_BASE + 2)
-#define OPTION_SIFILTER_OFF (OPTION_MD_BASE + 3)
+enum options
+{
+ OPTION_JSRI2BSR_ON = OPTION_MD_BASE,
+ OPTION_JSRI2BSR_OFF,
+ OPTION_SIFILTER_ON,
+ OPTION_SIFILTER_OFF,
+ OPTION_CPU,
+ OPTION_EB,
+ OPTION_EL,
+};
struct option md_longopts[] =
{
{ "jsri2bsr", no_argument, NULL, OPTION_JSRI2BSR_ON},
{ "sifilter", no_argument, NULL, OPTION_SIFILTER_ON},
{ "no-sifilter", no_argument, NULL, OPTION_SIFILTER_OFF},
+ { "cpu", required_argument, NULL, OPTION_CPU},
+ { "EB", no_argument, NULL, OPTION_EB},
+ { "EL", no_argument, NULL, OPTION_EL},
{ NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
int
-md_parse_option (c, arg)
- int c;
- char * arg;
+md_parse_option (int c, char * arg)
{
- int i;
- char * p;
-
switch (c)
{
-
+ case OPTION_CPU:
+ if (streq (arg, "210"))
+ {
+ cpu = M210;
+ target_big_endian = 1;
+ }
+ else if (streq (arg, "340"))
+ cpu = M340;
+ else
+ as_warn (_("unrecognised cpu type '%s'"), arg);
+ break;
+
+ case OPTION_EB: target_big_endian = 1; break;
+ case OPTION_EL: target_big_endian = 0; cpu = M340; break;
case OPTION_JSRI2BSR_ON: do_jsri2bsr = 1; break;
case OPTION_JSRI2BSR_OFF: do_jsri2bsr = 0; break;
case OPTION_SIFILTER_ON: sifilter_mode = 1; break;
}
void
-md_show_usage (stream)
- FILE * stream;
+md_show_usage (FILE * stream)
{
fprintf (stream, _("\
MCORE specific options:\n\
-{no-}jsri2bsr {dis}able jsri to bsr transformation (def: dis)\n\
- -{no-}sifilter {dis}able silicon filter behavior (def: dis)"));
+ -{no-}sifilter {dis}able silicon filter behavior (def: dis)\n\
+ -cpu=[210|340] select CPU type\n\
+ -EB assemble for a big endian system (default)\n\
+ -EL assemble for a little endian system\n"));
}
\f
int md_short_jump_size;
void
-md_create_short_jump (ptr, from_Nddr, to_Nddr, frag, to_symbol)
- char * ptr;
- addressT from_Nddr;
- addressT to_Nddr;
- fragS * frag;
- symbolS * to_symbol;
+md_create_short_jump (char * ptr ATTRIBUTE_UNUSED,
+ addressT from_Nddr ATTRIBUTE_UNUSED,
+ addressT to_Nddr ATTRIBUTE_UNUSED,
+ fragS * frag ATTRIBUTE_UNUSED,
+ symbolS * to_symbol ATTRIBUTE_UNUSED)
{
as_fatal (_("failed sanity check: short_jump"));
}
void
-md_create_long_jump (ptr, from_Nddr, to_Nddr, frag, to_symbol)
- char * ptr;
- addressT from_Nddr;
- addressT to_Nddr;
- fragS * frag;
- symbolS * to_symbol;
+md_create_long_jump (char * ptr ATTRIBUTE_UNUSED,
+ addressT from_Nddr ATTRIBUTE_UNUSED,
+ addressT to_Nddr ATTRIBUTE_UNUSED,
+ fragS * frag ATTRIBUTE_UNUSED,
+ symbolS * to_symbol ATTRIBUTE_UNUSED)
{
as_fatal (_("failed sanity check: long_jump"));
}
/* Called after relaxing, change the frags so they know how big they are. */
+
void
-md_convert_frag (abfd, sec, fragP)
- bfd * abfd;
- segT sec;
- register fragS * fragP;
+md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED,
+ segT sec ATTRIBUTE_UNUSED,
+ fragS * fragP)
{
- unsigned char * buffer;
+ char *buffer;
int targ_addr = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset;
-
- buffer = (unsigned char *) (fragP->fr_fix + fragP->fr_literal);
- targ_addr += fragP->fr_symbol->sy_frag->fr_address;
+
+ buffer = fragP->fr_fix + fragP->fr_literal;
switch (fragP->fr_subtype)
{
- case C (COND_JUMP, COND12):
- case C (UNCD_JUMP, UNCD12):
+ case C (COND_JUMP, DISP12):
+ case C (UNCD_JUMP, DISP12):
{
- /* Get the address of the end of the instruction */
+ /* Get the address of the end of the instruction. */
int next_inst = fragP->fr_fix + fragP->fr_address + 2;
unsigned char t0;
int disp = targ_addr - next_inst;
-
+
if (disp & 1)
as_bad (_("odd displacement at %x"), next_inst - 2);
-
+
disp >>= 1;
+
+ if (! target_big_endian)
+ {
+ t0 = buffer[1] & 0xF8;
+
+ md_number_to_chars (buffer, disp, 2);
+
+ buffer[1] = (buffer[1] & 0x07) | t0;
+ }
+ else
{
t0 = buffer[0] & 0xF8;
-
+
md_number_to_chars (buffer, disp, 2);
-
+
buffer[0] = (buffer[0] & 0x07) | t0;
}
-
+
fragP->fr_fix += 2;
- fragP->fr_var = 0;
}
break;
- case C (COND_JUMP, COND32):
+ case C (COND_JUMP, DISP32):
case C (COND_JUMP, UNDEF_WORD_DISP):
{
/* A conditional branch wont fit into 12 bits so:
- * b!cond 1f
- * jmpi 0f
- * .align 2
- * 0: .long disp
- * 1:
- *
- * if the b!cond is 4 byte aligned, the literal which would
- * go at x+4 will also be aligned.
- */
+ b!cond 1f
+ jmpi 0f
+ .align 2
+ 0: .long disp
+ 1:
+
+ If the b!cond is 4 byte aligned, the literal which would
+ go at x+4 will also be aligned. */
int first_inst = fragP->fr_fix + fragP->fr_address;
int needpad = (first_inst & 3);
- buffer[0] ^= 0x08; /* Toggle T/F bit */
+ if (! target_big_endian)
+ buffer[1] ^= 0x08;
+ else
+ buffer[0] ^= 0x08; /* Toggle T/F bit. */
- buffer[2] = INST_BYTE0 (MCORE_INST_JMPI); /* Build jmpi */
+ buffer[2] = INST_BYTE0 (MCORE_INST_JMPI); /* Build jmpi. */
buffer[3] = INST_BYTE1 (MCORE_INST_JMPI);
-
+
if (needpad)
{
+ if (! target_big_endian)
+ {
+ buffer[0] = 4; /* Branch over jmpi, pad, and ptr. */
+ buffer[2] = 1; /* Jmpi offset of 1 gets the pointer. */
+ }
+ else
{
- buffer[1] = 4; /* branch over jmpi, pad, and ptr */
- buffer[3] = 1; /* jmpi offset of 1 gets the pointer */
+ buffer[1] = 4; /* Branch over jmpi, pad, and ptr. */
+ buffer[3] = 1; /* Jmpi offset of 1 gets the pointer. */
}
-
- buffer[4] = 0; /* alignment/pad */
+
+ buffer[4] = 0; /* Alignment/pad. */
buffer[5] = 0;
- buffer[6] = 0; /* space for 32 bit address */
+ buffer[6] = 0; /* Space for 32 bit address. */
buffer[7] = 0;
buffer[8] = 0;
buffer[9] = 0;
-
- /* Make reloc for the long disp */
+
+ /* Make reloc for the long disp. */
fix_new (fragP, fragP->fr_fix + 6, 4,
fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32);
-
+
fragP->fr_fix += C32_LEN;
}
else
/* See comment below about this given gas' limitations for
shrinking the fragment. '3' is the amount of code that
we inserted here, but '4' is right for the space we reserved
- for this fragment. */
+ for this fragment. */
+ if (! target_big_endian)
{
- buffer[1] = 3; /* branch over jmpi, and ptr */
- buffer[3] = 0; /* jmpi offset of 0 gets the pointer */
+ buffer[0] = 3; /* Branch over jmpi, and ptr. */
+ buffer[2] = 0; /* Jmpi offset of 0 gets the pointer. */
}
-
- buffer[4] = 0; /* space for 32 bit address */
+ else
+ {
+ buffer[1] = 3; /* Branch over jmpi, and ptr. */
+ buffer[3] = 0; /* Jmpi offset of 0 gets the pointer. */
+ }
+
+ buffer[4] = 0; /* Space for 32 bit address. */
buffer[5] = 0;
buffer[6] = 0;
buffer[7] = 0;
-
+
/* Make reloc for the long disp. */
fix_new (fragP, fragP->fr_fix + 4, 4,
fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32);
/* Frag is actually shorter (see the other side of this ifdef)
but gas isn't prepared for that. We have to re-adjust
- the branch displacement so that it goes beyond the
+ the branch displacement so that it goes beyond the
full length of the fragment, not just what we actually
filled in. */
- buffer[1] = 4; /* jmpi, ptr, and the 'tail pad' */
+ if (! target_big_endian)
+ buffer[0] = 4; /* Jmpi, ptr, and the 'tail pad'. */
+ else
+ buffer[1] = 4; /* Jmpi, ptr, and the 'tail pad'. */
}
-
- fragP->fr_var = 0;
}
break;
- case C (UNCD_JUMP, UNCD32):
+ case C (UNCD_JUMP, DISP32):
case C (UNCD_JUMP, UNDEF_WORD_DISP):
{
/* An unconditional branch will not fit in 12 bits, make code which
.align 2
0: .long disp
we need a pad if "first_inst" is 4 byte aligned.
- [because the natural literal place is x + 2] */
+ [because the natural literal place is x + 2]. */
int first_inst = fragP->fr_fix + fragP->fr_address;
int needpad = !(first_inst & 3);
- buffer[0] = INST_BYTE0 (MCORE_INST_JMPI); /* Build jmpi */
+ buffer[0] = INST_BYTE0 (MCORE_INST_JMPI); /* Build jmpi. */
buffer[1] = INST_BYTE1 (MCORE_INST_JMPI);
if (needpad)
{
- buffer[1] = 1; /* jmpi offset of 1 since padded */
- buffer[2] = 0; /* alignment */
+ if (! target_big_endian)
+ buffer[0] = 1; /* Jmpi offset of 1 since padded. */
+ else
+ buffer[1] = 1; /* Jmpi offset of 1 since padded. */
+ buffer[2] = 0; /* Alignment. */
buffer[3] = 0;
- buffer[4] = 0; /* space for 32 bit address */
+ buffer[4] = 0; /* Space for 32 bit address. */
buffer[5] = 0;
buffer[6] = 0;
buffer[7] = 0;
-
- /* Make reloc for the long disp */
+
+ /* Make reloc for the long disp. */
fix_new (fragP, fragP->fr_fix + 4, 4,
fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32);
-
+
fragP->fr_fix += U32_LEN;
}
else
{
- buffer[1] = 0; /* jmpi offset of 0 if no pad */
- buffer[2] = 0; /* space for 32 bit address */
+ if (! target_big_endian)
+ buffer[0] = 0; /* Jmpi offset of 0 if no pad. */
+ else
+ buffer[1] = 0; /* Jmpi offset of 0 if no pad. */
+ buffer[2] = 0; /* Space for 32 bit address. */
buffer[3] = 0;
buffer[4] = 0;
buffer[5] = 0;
-
- /* Make reloc for the long disp */
+
+ /* Make reloc for the long disp. */
fix_new (fragP, fragP->fr_fix + 2, 4,
fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32);
fragP->fr_fix += U32_LEN;
}
-
- fragP->fr_var = 0;
}
break;
/* Applies the desired value to the specified location.
Also sets up addends for 'rela' type relocations. */
-int
-md_apply_fix3 (fixP, valp, segment)
- fixS * fixP;
- valueT * valp;
- segT segment;
+
+void
+md_apply_fix (fixS * fixP,
+ valueT * valP,
+ segT segment ATTRIBUTE_UNUSED)
{
char * buf = fixP->fx_where + fixP->fx_frag->fr_literal;
char * file = fixP->fx_file ? fixP->fx_file : _("unknown");
const char * symname;
/* Note: use offsetT because it is signed, valueT is unsigned. */
- offsetT val = (offsetT) * valp;
-
+ offsetT val = *valP;
+
symname = fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : _("<unknown>");
/* Save this for the addend in the relocation record. */
fixP->fx_addnumber = val;
- /* If the fix is relative to a symbol which is not defined, or not
- in the same segment as the fix, we cannot resolve it here. */
- if (fixP->fx_addsy != NULL
- && ( ! S_IS_DEFINED (fixP->fx_addsy)
- || (S_GET_SEGMENT (fixP->fx_addsy) != segment)))
+ if (fixP->fx_addsy != NULL)
{
- fixP->fx_done = 0;
#ifdef OBJ_ELF
/* For ELF we can just return and let the reloc that will be generated
take care of everything. For COFF we still have to insert 'val'
into the insn since the addend field will be ignored. */
- return 0;
+ return;
#endif
}
else
fixP->fx_done = 1;
-
+
switch (fixP->fx_r_type)
{
- case BFD_RELOC_MCORE_PCREL_IMM11BY2: /* second byte of 2 byte opcode */
+ /* Second byte of 2 byte opcode. */
+ case BFD_RELOC_MCORE_PCREL_IMM11BY2:
if ((val & 1) != 0)
as_bad_where (file, fixP->fx_line,
- _("odd distance branch (0x%x bytes)"), val);
+ _("odd distance branch (0x%lx bytes)"), (long) val);
val /= 2;
if (((val & ~0x3ff) != 0) && ((val | 0x3ff) != -1))
as_bad_where (file, fixP->fx_line,
- _("pcrel for branch to %s too far (0x%x)"),
- symname, val);
- buf[0] |= ((val >> 8) & 0x7);
- buf[1] |= (val & 0xff);
+ _("pcrel for branch to %s too far (0x%lx)"),
+ symname, (long) val);
+ if (target_big_endian)
+ {
+ buf[0] |= ((val >> 8) & 0x7);
+ buf[1] |= (val & 0xff);
+ }
+ else
+ {
+ buf[1] |= ((val >> 8) & 0x7);
+ buf[0] |= (val & 0xff);
+ }
break;
- case BFD_RELOC_MCORE_PCREL_IMM8BY4: /* lower 8 bits of 2 byte opcode */
+ /* Lower 8 bits of 2 byte opcode. */
+ case BFD_RELOC_MCORE_PCREL_IMM8BY4:
val += 3;
val /= 4;
if (val & ~0xff)
as_bad_where (file, fixP->fx_line,
- _("pcrel for lrw/jmpi/jsri to %s too far (0x%x)"),
- symname, val);
+ _("pcrel for lrw/jmpi/jsri to %s too far (0x%lx)"),
+ symname, (long) val);
+ else if (! target_big_endian)
+ buf[0] |= (val & 0xff);
else
buf[1] |= (val & 0xff);
break;
- case BFD_RELOC_MCORE_PCREL_IMM4BY2: /* loopt instruction */
+ /* Loopt instruction. */
+ case BFD_RELOC_MCORE_PCREL_IMM4BY2:
if ((val < -32) || (val > -2))
as_bad_where (file, fixP->fx_line,
- _("pcrel for loopt too far (0x%x)"), val);
+ _("pcrel for loopt too far (0x%lx)"), (long) val);
val /= 2;
- buf[1] |= (val & 0xf);
+ if (! target_big_endian)
+ buf[0] |= (val & 0xf);
+ else
+ buf[1] |= (val & 0xf);
break;
case BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2:
/* Conditional linker map jsri to bsr. */
- /* If its a local target and close enough, fix it.
- NB: >= -2k for backwards bsr; < 2k for forwards... */
+ /* If its a local target and close enough, fix it.
+ NB: >= -2k for backwards bsr; < 2k for forwards... */
if (fixP->fx_addsy == 0 && val >= -2048 && val < 2048)
{
long nval = (val / 2) & 0x7ff;
nval |= MCORE_INST_BSR;
-
+
/* REPLACE the instruction, don't just modify it. */
buf[0] = INST_BYTE0 (nval);
buf[1] = INST_BYTE1 (nval);
case BFD_RELOC_VTABLE_ENTRY:
fixP->fx_done = 0;
break;
-
+
default:
if (fixP->fx_addsy != NULL)
{
address, then it cannot be resolved until the final link. */
fixP->fx_done = 0;
}
-#ifdef OBJ_ELF
+#ifdef OBJ_ELF
else
#endif
{
}
break;
}
-
- return 0; /* Return value is ignored. */
}
void
-md_operand (expressionP)
- expressionS * expressionP;
+md_operand (expressionS * expressionP)
{
/* Ignore leading hash symbol, if poresent. */
if (* input_line_pointer == '#')
/* Called just before address relaxation, return the length
by which a fragment must grow to reach it's destination. */
int
-md_estimate_size_before_relax (fragP, segment_type)
- register fragS * fragP;
- register segT segment_type;
+md_estimate_size_before_relax (fragS * fragP, segT segment_type)
{
switch (fragP->fr_subtype)
{
+ default:
+ abort ();
+
case C (UNCD_JUMP, UNDEF_DISP):
/* Used to be a branch to somewhere which was unknown. */
if (!fragP->fr_symbol)
- {
- fragP->fr_subtype = C (UNCD_JUMP, UNCD12);
- fragP->fr_var = md_relax_table[C (UNCD_JUMP, UNCD12)].rlx_length;
- }
+ fragP->fr_subtype = C (UNCD_JUMP, DISP12);
else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
- {
- fragP->fr_subtype = C (UNCD_JUMP, UNCD12);
- fragP->fr_var = md_relax_table[C (UNCD_JUMP, UNCD12)].rlx_length;
- }
+ fragP->fr_subtype = C (UNCD_JUMP, DISP12);
else
- {
- fragP->fr_subtype = C (UNCD_JUMP, UNDEF_WORD_DISP);
- fragP->fr_var = md_relax_table[C (UNCD_JUMP, UNCD32)].rlx_length;
- return md_relax_table[C (UNCD_JUMP, UNCD32)].rlx_length;
- }
+ fragP->fr_subtype = C (UNCD_JUMP, UNDEF_WORD_DISP);
break;
- default:
- abort ();
-
case C (COND_JUMP, UNDEF_DISP):
- /* Used to be a branch to somewhere which was unknown. */
+ /* Used to be a branch to somewhere which was unknown. */
if (fragP->fr_symbol
&& S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
- {
- /* Got a symbol and it's defined in this segment, become byte
- sized - maybe it will fix up */
- fragP->fr_subtype = C (COND_JUMP, COND12);
- fragP->fr_var = md_relax_table[C (COND_JUMP, COND12)].rlx_length;
- }
+ /* Got a symbol and it's defined in this segment, become byte
+ sized - maybe it will fix up */
+ fragP->fr_subtype = C (COND_JUMP, DISP12);
else if (fragP->fr_symbol)
- {
- /* Its got a segment, but its not ours, so it will always be long. */
- fragP->fr_subtype = C (COND_JUMP, UNDEF_WORD_DISP);
- fragP->fr_var = md_relax_table[C (COND_JUMP, COND32)].rlx_length;
- return md_relax_table[C (COND_JUMP, COND32)].rlx_length;
- }
+ /* Its got a segment, but its not ours, so it will always be long. */
+ fragP->fr_subtype = C (COND_JUMP, UNDEF_WORD_DISP);
else
- {
- /* We know the abs value. */
- fragP->fr_subtype = C (COND_JUMP, COND12);
- fragP->fr_var = md_relax_table[C (COND_JUMP, COND12)].rlx_length;
- }
+ /* We know the abs value. */
+ fragP->fr_subtype = C (COND_JUMP, DISP12);
+ break;
+ case C (UNCD_JUMP, DISP12):
+ case C (UNCD_JUMP, DISP32):
+ case C (UNCD_JUMP, UNDEF_WORD_DISP):
+ case C (COND_JUMP, DISP12):
+ case C (COND_JUMP, DISP32):
+ case C (COND_JUMP, UNDEF_WORD_DISP):
+ /* When relaxing a section for the second time, we don't need to
+ do anything besides return the current size. */
break;
}
-
- return fragP->fr_var;
+
+ return md_relax_table[fragP->fr_subtype].rlx_length;
}
-/* Put number into target byte order */
+/* Put number into target byte order. */
+
void
-md_number_to_chars (ptr, use, nbytes)
- char * ptr;
- valueT use;
- int nbytes;
+md_number_to_chars (char * ptr, valueT use, int nbytes)
{
- switch (nbytes)
- {
- case 4: *ptr++ = (use >> 24) & 0xff; /* fall through */
- case 3: *ptr++ = (use >> 16) & 0xff; /* fall through */
- case 2: *ptr++ = (use >> 8) & 0xff; /* fall through */
- case 1: *ptr++ = (use >> 0) & 0xff; break;
- default: abort ();
- }
+ if (target_big_endian)
+ number_to_chars_bigendian (ptr, use, nbytes);
+ else
+ number_to_chars_littleendian (ptr, use, nbytes);
}
/* Round up a section size to the appropriate boundary. */
+
valueT
-md_section_align (segment, size)
- segT segment;
- valueT size;
+md_section_align (segT segment ATTRIBUTE_UNUSED,
+ valueT size)
{
- return size; /* Byte alignment is fine */
+ /* Byte alignment is fine. */
+ return size;
}
-
/* The location from which a PC relative jump should be calculated,
given a PC relative reloc. */
+
long
-md_pcrel_from_section (fixp, sec)
- fixS * fixp;
- segT sec;
+md_pcrel_from_section (fixS * fixp, segT sec ATTRIBUTE_UNUSED)
{
#ifdef OBJ_ELF
/* If the symbol is undefined or defined in another section
we leave the add number alone for the linker to fix it later.
- Only account for the PC pre-bump (which is 2 bytes on the MCore). */
+ Only account for the PC pre-bump (which is 2 bytes on the MCore). */
if (fixp->fx_addsy != (symbolS *) NULL
&& (! S_IS_DEFINED (fixp->fx_addsy)
|| (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
-
+
{
- assert (fixp->fx_size == 2); /* must be an insn */
+ gas_assert (fixp->fx_size == 2); /* must be an insn */
return fixp->fx_size;
}
#endif
- /* The case where we are going to resolve things... */
+ /* The case where we are going to resolve things... */
return fixp->fx_size + fixp->fx_where + fixp->fx_frag->fr_address;
}
#define MAP(SZ,PCREL,TYPE) case F (SZ, PCREL): code = (TYPE); break
arelent *
-tc_gen_reloc (section, fixp)
- asection * section;
- fixS * fixp;
+tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp)
{
arelent * rel;
bfd_reloc_code_real_type code;
- int handled = 0;
switch (fixp->fx_r_type)
{
- /* These confuse the size/pcrel macro approach. */
+ /* These confuse the size/pcrel macro approach. */
case BFD_RELOC_VTABLE_INHERIT:
case BFD_RELOC_VTABLE_ENTRY:
case BFD_RELOC_MCORE_PCREL_IMM4BY2:
case BFD_RELOC_MCORE_PCREL_IMM8BY4:
case BFD_RELOC_MCORE_PCREL_IMM11BY2:
case BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2:
+ case BFD_RELOC_RVA:
code = fixp->fx_r_type;
break;
-
+
default:
switch (F (fixp->fx_size, fixp->fx_pcrel))
- {
- MAP (1, 0, BFD_RELOC_8);
- MAP (2, 0, BFD_RELOC_16);
- MAP (4, 0, BFD_RELOC_32);
- MAP (1, 1, BFD_RELOC_8_PCREL);
- MAP (2, 1, BFD_RELOC_16_PCREL);
- MAP (4, 1, BFD_RELOC_32_PCREL);
- default:
+ {
+ MAP (1, 0, BFD_RELOC_8);
+ MAP (2, 0, BFD_RELOC_16);
+ MAP (4, 0, BFD_RELOC_32);
+ MAP (1, 1, BFD_RELOC_8_PCREL);
+ MAP (2, 1, BFD_RELOC_16_PCREL);
+ MAP (4, 1, BFD_RELOC_32_PCREL);
+ default:
code = fixp->fx_r_type;
- as_bad (_("Can not do %d byte %srelocation"),
+ as_bad (_("Can not do %d byte %srelocation"),
fixp->fx_size,
- fixp->fx_pcrel ? _("pc-relative") : "");
- }
+ fixp->fx_pcrel ? _("pc-relative") : "");
+ }
break;
}
- rel = (arelent *) xmalloc (sizeof (arelent));
- rel->sym_ptr_ptr = & fixp->fx_addsy->bsym;
+ rel = xmalloc (sizeof (arelent));
+ rel->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
+ *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
/* Always pass the addend along! */
rel->addend = fixp->fx_addnumber;
rel->howto = bfd_reloc_type_lookup (stdoutput, code);
-
+
if (rel->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- _("Cannot represent relocation type %s"),
- bfd_get_reloc_code_name (code));
-
+ _("Cannot represent relocation type %s"),
+ bfd_get_reloc_code_name (code));
+
/* Set howto to a garbage value so that we can keep going. */
rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
- assert (rel->howto != NULL);
+ gas_assert (rel->howto != NULL);
}
return rel;
This is used to force out switch and PC relative relocations when
relaxing. */
int
-mcore_force_relocation (fix)
- fixS * fix;
+mcore_force_relocation (fixS * fix)
{
- if ( fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT
- || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ if (fix->fx_r_type == BFD_RELOC_RVA)
return 1;
- return 0;
+ return generic_force_reloc (fix);
}
/* Return true if the fix can be handled by GAS, false if it must
be passed through to the linker. */
-boolean
-mcore_fix_adjustable (fixP)
- fixS * fixP;
+
+bfd_boolean
+mcore_fix_adjustable (fixS * fixP)
{
- if (fixP->fx_addsy == NULL)
- return 1;
-
/* We need the symbol name for the VTABLE entries. */
if ( fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 1;
}
-
-/* Handle the .section pseudo-op. This is like the usual one, but it
- dumps the literal pool before changing the section. */
-static void
-mcore_s_section (ignore)
- int ignore;
-{
- dump_literals (0);
-
- obj_elf_section (ignore);
-}
#endif /* OBJ_ELF */