#define DBG(x)
#endif
+#define SKIP_SPACE_TABS(S) \
+ do { while (*(S) == ' ' || *(S) == '\t') ++(S); } while (0)
+
/* Clean up namespace so we can include obj-elf.h too. */
static int mips_output_flavor (void);
static int mips_output_flavor (void) { return OUTPUT_FLAVOR; }
/* 1 if -msingle-float, 0 if -mdouble-float. The default is 0. */
static int file_mips_single_float = 0;
+/* True if -mnan=2008, false if -mnan=legacy. */
+static bfd_boolean mips_flag_nan2008 = FALSE;
+
static struct mips_set_options mips_opts =
{
/* isa */ ISA_UNKNOWN, /* ase */ 0, /* mips16 */ -1, /* micromips */ -1,
but nothing is ideal around here.
*/
-static char *insn_error;
+/* Types of printf format used for instruction-related error messages.
+ "I" means int ("%d") and "S" means string ("%s"). */
+enum mips_insn_error_format {
+ ERR_FMT_PLAIN,
+ ERR_FMT_I,
+ ERR_FMT_SS,
+};
+
+/* Information about an error that was found while assembling the current
+ instruction. */
+struct mips_insn_error {
+ /* We sometimes need to match an instruction against more than one
+ opcode table entry. Errors found during this matching are reported
+ against a particular syntactic argument rather than against the
+ instruction as a whole. We grade these messages so that errors
+ against argument N have a greater priority than an error against
+ any argument < N, since the former implies that arguments up to N
+ were acceptable and that the opcode entry was therefore a closer match.
+ If several matches report an error against the same argument,
+ we only use that error if it is the same in all cases.
+
+ min_argnum is the minimum argument number for which an error message
+ should be accepted. It is 0 if MSG is against the instruction as
+ a whole. */
+ int min_argnum;
+
+ /* The printf()-style message, including its format and arguments. */
+ enum mips_insn_error_format format;
+ const char *msg;
+ union {
+ int i;
+ const char *ss[2];
+ } u;
+};
+
+/* The error that should be reported for the current instruction. */
+static struct mips_insn_error insn_error;
static int auto_align = 1;
fill a branch delay slot. */
static struct mips_cl_insn history[1 + MAX_NOPS];
+/* Arrays of operands for each instruction. */
+#define MAX_OPERANDS 6
+struct mips_operand_array {
+ const struct mips_operand *operand[MAX_OPERANDS];
+};
+static struct mips_operand_array *mips_operands;
+static struct mips_operand_array *mips16_operands;
+static struct mips_operand_array *micromips_operands;
+
/* Nop instructions used by emit_nop. */
static struct mips_cl_insn nop_insn;
static struct mips_cl_insn mips16_nop_insn;
static fragS *prev_reloc_op_frag;
-/* Map normal MIPS register numbers to mips16 register numbers. */
-
-#define X ILLEGAL_REG
-static const int mips32_to_16_reg_map[] =
-{
- X, X, 2, 3, 4, 5, 6, 7,
- X, X, X, X, X, X, X, X,
- 0, 1, X, X, X, X, X, X,
- X, X, X, X, X, X, X, X
-};
-#undef X
-
/* Map mips16 register numbers to normal MIPS register numbers. */
static const unsigned int mips16_to_32_reg_map[] =
16, 17, 2, 3, 4, 5, 6, 7
};
-/* Map normal MIPS register numbers to microMIPS register numbers. */
-
-#define mips32_to_micromips_reg_b_map mips32_to_16_reg_map
-#define mips32_to_micromips_reg_c_map mips32_to_16_reg_map
-#define mips32_to_micromips_reg_d_map mips32_to_16_reg_map
-#define mips32_to_micromips_reg_e_map mips32_to_16_reg_map
-#define mips32_to_micromips_reg_f_map mips32_to_16_reg_map
-#define mips32_to_micromips_reg_g_map mips32_to_16_reg_map
-#define mips32_to_micromips_reg_l_map mips32_to_16_reg_map
-
-#define X ILLEGAL_REG
-/* reg type m: 0, 17, 2, 3, 16, 18, 19, 20. */
-static const int mips32_to_micromips_reg_m_map[] =
-{
- 0, X, 2, 3, X, X, X, X,
- X, X, X, X, X, X, X, X,
- 4, 1, 5, 6, 7, X, X, X,
- X, X, X, X, X, X, X, X
-};
-
-/* reg type q: 0, 2-7. 17. */
-static const int mips32_to_micromips_reg_q_map[] =
-{
- 0, X, 2, 3, 4, 5, 6, 7,
- X, X, X, X, X, X, X, X,
- X, 1, X, X, X, X, X, X,
- X, X, X, X, X, X, X, X
-};
-
-#define mips32_to_micromips_reg_n_map mips32_to_micromips_reg_m_map
-#undef X
-
/* Map microMIPS register numbers to normal MIPS register numbers. */
-#define micromips_to_32_reg_b_map mips16_to_32_reg_map
-#define micromips_to_32_reg_c_map mips16_to_32_reg_map
#define micromips_to_32_reg_d_map mips16_to_32_reg_map
-#define micromips_to_32_reg_e_map mips16_to_32_reg_map
-#define micromips_to_32_reg_f_map mips16_to_32_reg_map
-#define micromips_to_32_reg_g_map mips16_to_32_reg_map
/* The microMIPS registers with type h. */
static const unsigned int micromips_to_32_reg_h_map1[] =
6, 7, 7, 21, 22, 5, 6, 7
};
-#define micromips_to_32_reg_l_map mips16_to_32_reg_map
-
/* The microMIPS registers with type m. */
static const unsigned int micromips_to_32_reg_m_map[] =
{
#define micromips_to_32_reg_n_map micromips_to_32_reg_m_map
-/* The microMIPS registers with type q. */
-static const unsigned int micromips_to_32_reg_q_map[] =
-{
- 0, 17, 2, 3, 4, 5, 6, 7
-};
-
-/* microMIPS imm type B. */
-static const int micromips_imm_b_map[] =
-{
- 1, 4, 8, 12, 16, 20, 24, -1
-};
-
-/* microMIPS imm type C. */
-static const int micromips_imm_c_map[] =
-{
- 128, 1, 2, 3, 4, 7, 8, 15, 16, 31, 32, 63, 64, 255, 32768, 65535
-};
-
/* Classifies the kind of instructions we're interested in when
implementing -mfix-vr4120. */
enum fix_vr4120_class
(((x) &~ (offsetT) 0xffffffff) == 0 \
|| (((x) &~ (offsetT) 0xffffffff) == ~ (offsetT) 0xffffffff))
-/* Replace bits MASK << SHIFT of STRUCT with the equivalent bits in
- VALUE << SHIFT. VALUE is evaluated exactly once. */
-#define INSERT_BITS(STRUCT, VALUE, MASK, SHIFT) \
- (STRUCT) = (((STRUCT) & ~((MASK) << (SHIFT))) \
- | (((VALUE) & (MASK)) << (SHIFT)))
-
/* Extract bits MASK << SHIFT from STRUCT and shift them right
SHIFT places. */
#define EXTRACT_BITS(STRUCT, MASK, SHIFT) \
(((STRUCT) >> (SHIFT)) & (MASK))
-/* Change INSN's opcode so that the operand given by FIELD has value VALUE.
- INSN is a mips_cl_insn structure and VALUE is evaluated exactly once.
-
- include/opcode/mips.h specifies operand fields using the macros
- OP_MASK_<FIELD> and OP_SH_<FIELD>. The MIPS16 equivalents start
- with "MIPS16OP" instead of "OP". */
-#define INSERT_OPERAND(MICROMIPS, FIELD, INSN, VALUE) \
- do \
- if (!(MICROMIPS)) \
- INSERT_BITS ((INSN).insn_opcode, VALUE, \
- OP_MASK_##FIELD, OP_SH_##FIELD); \
- else \
- INSERT_BITS ((INSN).insn_opcode, VALUE, \
- MICROMIPSOP_MASK_##FIELD, MICROMIPSOP_SH_##FIELD); \
- while (0)
-#define MIPS16_INSERT_OPERAND(FIELD, INSN, VALUE) \
- INSERT_BITS ((INSN).insn_opcode, VALUE, \
- MIPS16OP_MASK_##FIELD, MIPS16OP_SH_##FIELD)
-
/* Extract the operand given by FIELD from mips_cl_insn INSN. */
#define EXTRACT_OPERAND(MICROMIPS, FIELD, INSN) \
(!(MICROMIPS) \
static void s_ehword (int);
static void s_cpadd (int);
static void s_insn (int);
+static void s_nan (int);
static void md_obj_begin (void);
static void md_obj_end (void);
static void s_mips_ent (int);
static void s_mips_loc (int);
static bfd_boolean pic_need_relax (symbolS *, asection *);
static int relaxed_branch_length (fragS *, asection *, int);
-static int validate_mips_insn (const struct mips_opcode *);
-static int validate_micromips_insn (const struct mips_opcode *);
static int relaxed_micromips_16bit_branch_length (fragS *, asection *, int);
static int relaxed_micromips_32bit_branch_length (fragS *, asection *, int);
OPTION_NO_MT,
OPTION_VIRT,
OPTION_NO_VIRT,
+ OPTION_MSA,
+ OPTION_NO_MSA,
OPTION_SMARTMIPS,
OPTION_NO_SMARTMIPS,
OPTION_DSPR2,
OPTION_PDR,
OPTION_NO_PDR,
OPTION_MVXWORKS_PIC,
+ OPTION_NAN,
OPTION_END_OF_ENUM
};
{"mno-mcu", no_argument, NULL, OPTION_NO_MCU},
{"mvirt", no_argument, NULL, OPTION_VIRT},
{"mno-virt", no_argument, NULL, OPTION_NO_VIRT},
+ {"mmsa", no_argument, NULL, OPTION_MSA},
+ {"mno-msa", no_argument, NULL, OPTION_NO_MSA},
/* Old-style architecture options. Don't add more of these. */
{"m4650", no_argument, NULL, OPTION_M4650},
{"mpdr", no_argument, NULL, OPTION_PDR},
{"mno-pdr", no_argument, NULL, OPTION_NO_PDR},
{"mvxworks-pic", no_argument, NULL, OPTION_MVXWORKS_PIC},
+ {"mnan", required_argument, NULL, OPTION_NAN},
{NULL, no_argument, NULL, 0}
};
{ "virt", ASE_VIRT, ASE_VIRT64,
OPTION_VIRT, OPTION_NO_VIRT,
+ 2, 2, 2, 2 },
+
+ { "msa", ASE_MSA, ASE_MSA64,
+ OPTION_MSA, OPTION_NO_MSA,
2, 2, 2, 2 }
};
{"ehword", s_ehword, 0},
{"cpadd", s_cpadd, 0},
{"insn", s_insn, 0},
+ {"nan", s_nan, 0},
/* Relatively generic pseudo-ops that happen to be used on MIPS
chips. */
\f
static char *expr_end;
-/* Expressions which appear in instructions. These are set by
- mips_ip. */
+/* An expression in a macro instruction. This is set by mips_ip and
+ mips16_ip and when populated is always an O_constant. */
static expressionS imm_expr;
-static expressionS imm2_expr;
-static expressionS offset_expr;
-/* Relocs associated with imm_expr and offset_expr. */
+/* The relocatable field in an instruction and the relocs associated
+ with it. These variables are used for instructions like LUI and
+ JAL as well as true offsets. They are also used for address
+ operands in macros. */
-static bfd_reloc_code_real_type imm_reloc[3]
- = {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
+static expressionS offset_expr;
static bfd_reloc_code_real_type offset_reloc[3]
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
base = mips_opts.micromips ? "microMIPS" : "MIPS";
size = ISA_HAS_64BIT_REGS (mips_opts.isa) ? 64 : 32;
if (min_rev < 0)
- as_warn (_("The %d-bit %s architecture does not support the"
+ as_warn (_("the %d-bit %s architecture does not support the"
" `%s' extension"), size, base, ase->name);
else
- as_warn (_("The `%s' extension requires %s%d revision %d or greater"),
+ as_warn (_("the `%s' extension requires %s%d revision %d or greater"),
ase->name, base, size, min_rev);
}
if ((ase->flags & FP64_ASES)
&& (warned_fp32 & ase->flags) != ase->flags)
{
warned_fp32 |= ase->flags;
- as_warn (_("The `%s' extension requires 64-bit FPRs"), ase->name);
+ as_warn (_("the `%s' extension requires 64-bit FPRs"), ase->name);
}
}
insn->cleared_p = 0;
}
+/* Get a list of all the operands in INSN. */
+
+static const struct mips_operand_array *
+insn_operands (const struct mips_cl_insn *insn)
+{
+ if (insn->insn_mo >= &mips_opcodes[0]
+ && insn->insn_mo < &mips_opcodes[NUMOPCODES])
+ return &mips_operands[insn->insn_mo - &mips_opcodes[0]];
+
+ if (insn->insn_mo >= &mips16_opcodes[0]
+ && insn->insn_mo < &mips16_opcodes[bfd_mips16_num_opcodes])
+ return &mips16_operands[insn->insn_mo - &mips16_opcodes[0]];
+
+ if (insn->insn_mo >= µmips_opcodes[0]
+ && insn->insn_mo < µmips_opcodes[bfd_micromips_num_opcodes])
+ return µmips_operands[insn->insn_mo - µmips_opcodes[0]];
+
+ abort ();
+}
+
+/* Get a description of operand OPNO of INSN. */
+
+static const struct mips_operand *
+insn_opno (const struct mips_cl_insn *insn, unsigned opno)
+{
+ const struct mips_operand_array *operands;
+
+ operands = insn_operands (insn);
+ if (opno >= MAX_OPERANDS || !operands->operand[opno])
+ abort ();
+ return operands->operand[opno];
+}
+
+/* Install UVAL as the value of OPERAND in INSN. */
+
+static inline void
+insn_insert_operand (struct mips_cl_insn *insn,
+ const struct mips_operand *operand, unsigned int uval)
+{
+ insn->insn_opcode = mips_insert_operand (operand, insn->insn_opcode, uval);
+}
+
+/* Extract the value of OPERAND from INSN. */
+
+static inline unsigned
+insn_extract_operand (const struct mips_cl_insn *insn,
+ const struct mips_operand *operand)
+{
+ return mips_extract_operand (operand, insn->insn_opcode);
+}
+
/* Record the current MIPS16/microMIPS mode in now_seg. */
static void
}
}
+/* Clear the error in insn_error. */
+
+static void
+clear_insn_error (void)
+{
+ memset (&insn_error, 0, sizeof (insn_error));
+}
+
+/* Possibly record error message MSG for the current instruction.
+ If the error is about a particular argument, ARGNUM is the 1-based
+ number of that argument, otherwise it is 0. FORMAT is the format
+ of MSG. Return true if MSG was used, false if the current message
+ was kept. */
+
+static bfd_boolean
+set_insn_error_format (int argnum, enum mips_insn_error_format format,
+ const char *msg)
+{
+ if (argnum == 0)
+ {
+ /* Give priority to errors against specific arguments, and to
+ the first whole-instruction message. */
+ if (insn_error.msg)
+ return FALSE;
+ }
+ else
+ {
+ /* Keep insn_error if it is against a later argument. */
+ if (argnum < insn_error.min_argnum)
+ return FALSE;
+
+ /* If both errors are against the same argument but are different,
+ give up on reporting a specific error for this argument.
+ See the comment about mips_insn_error for details. */
+ if (argnum == insn_error.min_argnum
+ && insn_error.msg
+ && strcmp (insn_error.msg, msg) != 0)
+ {
+ insn_error.msg = 0;
+ insn_error.min_argnum += 1;
+ return FALSE;
+ }
+ }
+ insn_error.min_argnum = argnum;
+ insn_error.format = format;
+ insn_error.msg = msg;
+ return TRUE;
+}
+
+/* Record an instruction error with no % format fields. ARGNUM and MSG are
+ as for set_insn_error_format. */
+
+static void
+set_insn_error (int argnum, const char *msg)
+{
+ set_insn_error_format (argnum, ERR_FMT_PLAIN, msg);
+}
+
+/* Record an instruction error with one %d field I. ARGNUM and MSG are
+ as for set_insn_error_format. */
+
+static void
+set_insn_error_i (int argnum, const char *msg, int i)
+{
+ if (set_insn_error_format (argnum, ERR_FMT_I, msg))
+ insn_error.u.i = i;
+}
+
+/* Record an instruction error with two %s fields S1 and S2. ARGNUM and MSG
+ are as for set_insn_error_format. */
+
+static void
+set_insn_error_ss (int argnum, const char *msg, const char *s1, const char *s2)
+{
+ if (set_insn_error_format (argnum, ERR_FMT_SS, msg))
+ {
+ insn_error.u.ss[0] = s1;
+ insn_error.u.ss[1] = s2;
+ }
+}
+
+/* Report the error in insn_error, which is against assembly code STR. */
+
+static void
+report_insn_error (const char *str)
+{
+ const char *msg;
+
+ msg = ACONCAT ((insn_error.msg, " `%s'", NULL));
+ switch (insn_error.format)
+ {
+ case ERR_FMT_PLAIN:
+ as_bad (msg, str);
+ break;
+
+ case ERR_FMT_I:
+ as_bad (msg, insn_error.u.i, str);
+ break;
+
+ case ERR_FMT_SS:
+ as_bad (msg, insn_error.u.ss[0], insn_error.u.ss[1], str);
+ break;
+ }
+}
+
/* Initialize vr4120_conflicts. There is a bit of duplication here:
the idea is to make it obvious at a glance that each errata is
included. */
unsigned int num;
};
-#define RTYPE_MASK 0x1ff00
-#define RTYPE_NUM 0x00100
-#define RTYPE_FPU 0x00200
-#define RTYPE_FCC 0x00400
-#define RTYPE_VEC 0x00800
-#define RTYPE_GP 0x01000
-#define RTYPE_CP0 0x02000
-#define RTYPE_PC 0x04000
-#define RTYPE_ACC 0x08000
-#define RTYPE_CCC 0x10000
-#define RNUM_MASK 0x000ff
-#define RWARN 0x80000
+#define RNUM_MASK 0x00000ff
+#define RTYPE_MASK 0x0ffff00
+#define RTYPE_NUM 0x0000100
+#define RTYPE_FPU 0x0000200
+#define RTYPE_FCC 0x0000400
+#define RTYPE_VEC 0x0000800
+#define RTYPE_GP 0x0001000
+#define RTYPE_CP0 0x0002000
+#define RTYPE_PC 0x0004000
+#define RTYPE_ACC 0x0008000
+#define RTYPE_CCC 0x0010000
+#define RTYPE_VI 0x0020000
+#define RTYPE_VF 0x0040000
+#define RTYPE_R5900_I 0x0080000
+#define RTYPE_R5900_Q 0x0100000
+#define RTYPE_R5900_R 0x0200000
+#define RTYPE_R5900_ACC 0x0400000
+#define RTYPE_MSA 0x0800000
+#define RWARN 0x8000000
#define GENERIC_REGISTER_NUMBERS \
{"$0", RTYPE_NUM | 0}, \
{"$v30", RTYPE_VEC | 30}, \
{"$v31", RTYPE_VEC | 31}
+#define R5900_I_NAMES \
+ {"$I", RTYPE_R5900_I | 0}
+
+#define R5900_Q_NAMES \
+ {"$Q", RTYPE_R5900_Q | 0}
+
+#define R5900_R_NAMES \
+ {"$R", RTYPE_R5900_R | 0}
+
+#define R5900_ACC_NAMES \
+ {"$ACC", RTYPE_R5900_ACC | 0 }
+
#define MIPS_DSP_ACCUMULATOR_NAMES \
{"$ac0", RTYPE_ACC | 0}, \
{"$ac1", RTYPE_ACC | 1}, \
MIPS16_SPECIAL_REGISTER_NAMES,
MDMX_VECTOR_REGISTER_NAMES,
+ R5900_I_NAMES,
+ R5900_Q_NAMES,
+ R5900_R_NAMES,
+ R5900_ACC_NAMES,
MIPS_DSP_ACCUMULATOR_NAMES,
{0, 0}
};
{0, 0}
};
-/* Check if S points at a valid register specifier according to TYPES.
- If so, then return 1, advance S to consume the specifier and store
- the register's number in REGNOP, otherwise return 0. */
+/* Register symbols $v0 and $v1 map to GPRs 2 and 3, but they can also be
+ interpreted as vector registers 0 and 1. If SYMVAL is the value of one
+ of these register symbols, return the associated vector register,
+ otherwise return SYMVAL itself. */
-static int
-reg_lookup (char **s, unsigned int types, unsigned int *regnop)
+static unsigned int
+mips_prefer_vec_regno (unsigned int symval)
+{
+ if ((symval & -2) == (RTYPE_GP | 2))
+ return RTYPE_VEC | (symval & 1);
+ return symval;
+}
+
+/* Return true if string [S, E) is a valid register name, storing its
+ symbol value in *SYMVAL_PTR if so. */
+
+static bfd_boolean
+mips_parse_register_1 (char *s, char *e, unsigned int *symval_ptr)
{
- symbolS *symbolP;
- char *e;
char save_c;
- int reg = -1;
+ symbolS *symbol;
+
+ /* Terminate name. */
+ save_c = *e;
+ *e = '\0';
+
+ /* Look up the name. */
+ symbol = symbol_find (s);
+ *e = save_c;
+
+ if (!symbol || S_GET_SEGMENT (symbol) != reg_section)
+ return FALSE;
+
+ *symval_ptr = S_GET_VALUE (symbol);
+ return TRUE;
+}
+
+/* Return true if the string at *SPTR is a valid register name. Allow it
+ to have a VU0-style channel suffix of the form x?y?z?w? if CHANNELS_PTR
+ is nonnull.
+
+ When returning true, move *SPTR past the register, store the
+ register's symbol value in *SYMVAL_PTR and the channel mask in
+ *CHANNELS_PTR (if nonnull). The symbol value includes the register
+ number (RNUM_MASK) and register type (RTYPE_MASK). The channel mask
+ is a 4-bit value of the form XYZW and is 0 if no suffix was given. */
+
+static bfd_boolean
+mips_parse_register (char **sptr, unsigned int *symval_ptr,
+ unsigned int *channels_ptr)
+{
+ char *s, *e, *m;
+ const char *q;
+ unsigned int channels, symval, bit;
/* Find end of name. */
- e = *s;
+ s = e = *sptr;
if (is_name_beginner (*e))
++e;
while (is_part_of_name (*e))
++e;
- /* Terminate name. */
- save_c = *e;
- *e = '\0';
-
- /* Look for a register symbol. */
- if ((symbolP = symbol_find (*s)) && S_GET_SEGMENT (symbolP) == reg_section)
- {
- int r = S_GET_VALUE (symbolP);
- if (r & types)
- reg = r & RNUM_MASK;
- else if ((types & RTYPE_VEC) && (r & ~1) == (RTYPE_GP | 2))
- /* Convert GP reg $v0/1 to MDMX reg $v0/1! */
- reg = (r & RNUM_MASK) - 2;
- }
- /* Else see if this is a register defined in an itbl entry. */
- else if ((types & RTYPE_GP) && itbl_have_entries)
+ channels = 0;
+ if (!mips_parse_register_1 (s, e, &symval))
{
- char *n = *s;
- unsigned long r;
+ if (!channels_ptr)
+ return FALSE;
- if (*n == '$')
- ++n;
- if (itbl_get_reg_val (n, &r))
- reg = r & RNUM_MASK;
- }
+ /* Eat characters from the end of the string that are valid
+ channel suffixes. The preceding register must be $ACC or
+ end with a digit, so there is no ambiguity. */
+ bit = 1;
+ m = e;
+ for (q = "wzyx"; *q; q++, bit <<= 1)
+ if (m > s && m[-1] == *q)
+ {
+ --m;
+ channels |= bit;
+ }
- /* Advance to next token if a register was recognised. */
- if (reg >= 0)
- *s = e;
- else if (types & RWARN)
- as_warn (_("Unrecognized register name `%s'"), *s);
+ if (channels == 0
+ || !mips_parse_register_1 (s, m, &symval)
+ || (symval & (RTYPE_VI | RTYPE_VF | RTYPE_R5900_ACC)) == 0)
+ return FALSE;
+ }
- *e = save_c;
- if (regnop)
- *regnop = reg;
- return reg >= 0;
+ *sptr = e;
+ *symval_ptr = symval;
+ if (channels_ptr)
+ *channels_ptr = channels;
+ return TRUE;
}
-/* Check if S points at a valid register list according to TYPES.
- If so, then return 1, advance S to consume the list and store
- the registers present on the list as a bitmask of ones in REGLISTP,
- otherwise return 0. A valid list comprises a comma-separated
- enumeration of valid single registers and/or dash-separated
- contiguous register ranges as determined by their numbers.
-
- As a special exception if one of s0-s7 registers is specified as
- the range's lower delimiter and s8 (fp) is its upper one, then no
- registers whose numbers place them between s7 and s8 (i.e. $24-$29)
- are selected; they have to be listed separately if needed. */
+/* Check if SPTR points at a valid register specifier according to TYPES.
+ If so, then return 1, advance S to consume the specifier and store
+ the register's number in REGNOP, otherwise return 0. */
static int
-reglist_lookup (char **s, unsigned int types, unsigned int *reglistp)
-{
- unsigned int reglist = 0;
- unsigned int lastregno;
- bfd_boolean ok = TRUE;
- unsigned int regmask;
- char *s_endlist = *s;
- char *s_reset = *s;
+reg_lookup (char **s, unsigned int types, unsigned int *regnop)
+{
unsigned int regno;
- while (reg_lookup (s, types, ®no))
+ if (mips_parse_register (s, ®no, NULL))
{
- lastregno = regno;
- if (**s == '-')
- {
- (*s)++;
- ok = reg_lookup (s, types, &lastregno);
- if (ok && lastregno < regno)
- ok = FALSE;
- if (!ok)
- break;
- }
-
- if (lastregno == FP && regno >= S0 && regno <= S7)
- {
- lastregno = S7;
- reglist |= 1 << FP;
- }
- regmask = 1 << lastregno;
- regmask = (regmask << 1) - 1;
- regmask ^= (1 << regno) - 1;
- reglist |= regmask;
-
- s_endlist = *s;
- if (**s != ',')
- break;
- (*s)++;
+ if (types & RTYPE_VEC)
+ regno = mips_prefer_vec_regno (regno);
+ if (regno & types)
+ regno &= RNUM_MASK;
+ else
+ regno = ~0;
}
-
- if (ok)
- *s = s_endlist;
else
- *s = s_reset;
- if (reglistp)
- *reglistp = reglist;
- return ok && reglist != 0;
+ {
+ if (types & RWARN)
+ as_warn (_("unrecognized register name `%s'"), *s);
+ regno = ~0;
+ }
+ if (regnop)
+ *regnop = regno;
+ return regno <= RNUM_MASK;
}
-static unsigned int
-mips_lookup_reg_pair (unsigned int regno1, unsigned int regno2,
- const unsigned int *map1, const unsigned int *map2,
- unsigned int count)
+/* Parse a VU0 "x?y?z?w?" channel mask at S and store the associated
+ mask in *CHANNELS. Return a pointer to the first unconsumed character. */
+
+static char *
+mips_parse_vu0_channels (char *s, unsigned int *channels)
{
unsigned int i;
- for (i = 0; i < count; i++)
- if (map1[i] == regno1 && map2[i] == regno2)
- return i;
- return ILLEGAL_REG;
+ *channels = 0;
+ for (i = 0; i < 4; i++)
+ if (*s == "xyzw"[i])
+ {
+ *channels |= 1 << (3 - i);
+ ++s;
+ }
+ return s;
}
-/* Return TRUE if opcode MO is valid on the currently selected ISA, ASE
- and architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
+/* Token types for parsed operand lists. */
+enum mips_operand_token_type {
+ /* A plain register, e.g. $f2. */
+ OT_REG,
-static bfd_boolean
-is_opcode_valid (const struct mips_opcode *mo)
-{
- int isa = mips_opts.isa;
- int ase = mips_opts.ase;
- int fp_s, fp_d;
- unsigned int i;
+ /* A 4-bit XYZW channel mask. */
+ OT_CHANNELS,
- if (ISA_HAS_64BIT_REGS (mips_opts.isa))
- for (i = 0; i < ARRAY_SIZE (mips_ases); i++)
- if ((ase & mips_ases[i].flags) == mips_ases[i].flags)
- ase |= mips_ases[i].flags64;
+ /* A constant vector index, e.g. [1]. */
+ OT_INTEGER_INDEX,
- if (!opcode_is_member (mo, isa, ase, mips_opts.arch))
- return FALSE;
+ /* A register vector index, e.g. [$2]. */
+ OT_REG_INDEX,
- /* Check whether the instruction or macro requires single-precision or
- double-precision floating-point support. Note that this information is
- stored differently in the opcode table for insns and macros. */
- if (mo->pinfo == INSN_MACRO)
- {
- fp_s = mo->pinfo2 & INSN2_M_FP_S;
- fp_d = mo->pinfo2 & INSN2_M_FP_D;
- }
- else
- {
- fp_s = mo->pinfo & FP_S;
- fp_d = mo->pinfo & FP_D;
- }
+ /* A continuous range of registers, e.g. $s0-$s4. */
+ OT_REG_RANGE,
- if (fp_d && (mips_opts.soft_float || mips_opts.single_float))
- return FALSE;
+ /* A (possibly relocated) expression. */
+ OT_INTEGER,
- if (fp_s && mips_opts.soft_float)
- return FALSE;
+ /* A floating-point value. */
+ OT_FLOAT,
- return TRUE;
-}
+ /* A single character. This can be '(', ')' or ',', but '(' only appears
+ before OT_REGs. */
+ OT_CHAR,
-/* Return TRUE if the MIPS16 opcode MO is valid on the currently
- selected ISA and architecture. */
+ /* A doubled character, either "--" or "++". */
+ OT_DOUBLE_CHAR,
-static bfd_boolean
-is_opcode_valid_16 (const struct mips_opcode *mo)
+ /* The end of the operand list. */
+ OT_END
+};
+
+/* A parsed operand token. */
+struct mips_operand_token
{
- return opcode_is_member (mo, mips_opts.isa, 0, mips_opts.arch);
+ /* The type of token. */
+ enum mips_operand_token_type type;
+ union
+ {
+ /* The register symbol value for an OT_REG or OT_REG_INDEX. */
+ unsigned int regno;
+
+ /* The 4-bit channel mask for an OT_CHANNEL_SUFFIX. */
+ unsigned int channels;
+
+ /* The integer value of an OT_INTEGER_INDEX. */
+ addressT index;
+
+ /* The two register symbol values involved in an OT_REG_RANGE. */
+ struct {
+ unsigned int regno1;
+ unsigned int regno2;
+ } reg_range;
+
+ /* The value of an OT_INTEGER. The value is represented as an
+ expression and the relocation operators that were applied to
+ that expression. The reloc entries are BFD_RELOC_UNUSED if no
+ relocation operators were used. */
+ struct {
+ expressionS value;
+ bfd_reloc_code_real_type relocs[3];
+ } integer;
+
+ /* The binary data for an OT_FLOAT constant, and the number of bytes
+ in the constant. */
+ struct {
+ unsigned char data[8];
+ int length;
+ } flt;
+
+ /* The character represented by an OT_CHAR or OT_DOUBLE_CHAR. */
+ char ch;
+ } u;
+};
+
+/* An obstack used to construct lists of mips_operand_tokens. */
+static struct obstack mips_operand_tokens;
+
+/* Give TOKEN type TYPE and add it to mips_operand_tokens. */
+
+static void
+mips_add_token (struct mips_operand_token *token,
+ enum mips_operand_token_type type)
+{
+ token->type = type;
+ obstack_grow (&mips_operand_tokens, token, sizeof (*token));
}
-/* Return TRUE if the size of the microMIPS opcode MO matches one
- explicitly requested. Always TRUE in the standard MIPS mode. */
+/* Check whether S is '(' followed by a register name. Add OT_CHAR
+ and OT_REG tokens for them if so, and return a pointer to the first
+ unconsumed character. Return null otherwise. */
-static bfd_boolean
-is_size_valid (const struct mips_opcode *mo)
+static char *
+mips_parse_base_start (char *s)
{
- if (!mips_opts.micromips)
- return TRUE;
+ struct mips_operand_token token;
+ unsigned int regno, channels;
+ bfd_boolean decrement_p;
- if (mips_opts.insn32)
+ if (*s != '(')
+ return 0;
+
+ ++s;
+ SKIP_SPACE_TABS (s);
+
+ /* Only match "--" as part of a base expression. In other contexts "--X"
+ is a double negative. */
+ decrement_p = (s[0] == '-' && s[1] == '-');
+ if (decrement_p)
{
- if (mo->pinfo != INSN_MACRO && micromips_insn_length (mo) != 4)
- return FALSE;
- if ((mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0)
- return FALSE;
+ s += 2;
+ SKIP_SPACE_TABS (s);
}
- if (!forced_insn_length)
- return TRUE;
- if (mo->pinfo == INSN_MACRO)
- return FALSE;
- return forced_insn_length == micromips_insn_length (mo);
-}
-/* Return TRUE if the microMIPS opcode MO is valid for the delay slot
- of the preceding instruction. Always TRUE in the standard MIPS mode.
+ /* Allow a channel specifier because that leads to better error messages
+ than treating something like "$vf0x++" as an expression. */
+ if (!mips_parse_register (&s, ®no, &channels))
+ return 0;
+
+ token.u.ch = '(';
+ mips_add_token (&token, OT_CHAR);
+
+ if (decrement_p)
+ {
+ token.u.ch = '-';
+ mips_add_token (&token, OT_DOUBLE_CHAR);
+ }
+
+ token.u.regno = regno;
+ mips_add_token (&token, OT_REG);
+
+ if (channels)
+ {
+ token.u.channels = channels;
+ mips_add_token (&token, OT_CHANNELS);
+ }
+
+ /* For consistency, only match "++" as part of base expressions too. */
+ SKIP_SPACE_TABS (s);
+ if (s[0] == '+' && s[1] == '+')
+ {
+ s += 2;
+ token.u.ch = '+';
+ mips_add_token (&token, OT_DOUBLE_CHAR);
+ }
+
+ return s;
+}
+
+/* Parse one or more tokens from S. Return a pointer to the first
+ unconsumed character on success. Return null if an error was found
+ and store the error text in insn_error. FLOAT_FORMAT is as for
+ mips_parse_arguments. */
+
+static char *
+mips_parse_argument_token (char *s, char float_format)
+{
+ char *end, *save_in, *err;
+ unsigned int regno1, regno2, channels;
+ struct mips_operand_token token;
+
+ /* First look for "($reg", since we want to treat that as an
+ OT_CHAR and OT_REG rather than an expression. */
+ end = mips_parse_base_start (s);
+ if (end)
+ return end;
+
+ /* Handle other characters that end up as OT_CHARs. */
+ if (*s == ')' || *s == ',')
+ {
+ token.u.ch = *s;
+ mips_add_token (&token, OT_CHAR);
+ ++s;
+ return s;
+ }
+
+ /* Handle tokens that start with a register. */
+ if (mips_parse_register (&s, ®no1, &channels))
+ {
+ if (channels)
+ {
+ /* A register and a VU0 channel suffix. */
+ token.u.regno = regno1;
+ mips_add_token (&token, OT_REG);
+
+ token.u.channels = channels;
+ mips_add_token (&token, OT_CHANNELS);
+ return s;
+ }
+
+ SKIP_SPACE_TABS (s);
+ if (*s == '-')
+ {
+ /* A register range. */
+ ++s;
+ SKIP_SPACE_TABS (s);
+ if (!mips_parse_register (&s, ®no2, NULL))
+ {
+ set_insn_error (0, _("invalid register range"));
+ return 0;
+ }
+
+ token.u.reg_range.regno1 = regno1;
+ token.u.reg_range.regno2 = regno2;
+ mips_add_token (&token, OT_REG_RANGE);
+ return s;
+ }
+
+ /* Add the register itself. */
+ token.u.regno = regno1;
+ mips_add_token (&token, OT_REG);
+
+ /* Check for a vector index. */
+ if (*s == '[')
+ {
+ ++s;
+ SKIP_SPACE_TABS (s);
+ if (mips_parse_register (&s, &token.u.regno, NULL))
+ mips_add_token (&token, OT_REG_INDEX);
+ else
+ {
+ expressionS element;
+
+ my_getExpression (&element, s);
+ if (element.X_op != O_constant)
+ {
+ set_insn_error (0, _("vector element must be constant"));
+ return 0;
+ }
+ s = expr_end;
+ token.u.index = element.X_add_number;
+ mips_add_token (&token, OT_INTEGER_INDEX);
+ }
+ SKIP_SPACE_TABS (s);
+ if (*s != ']')
+ {
+ set_insn_error (0, _("missing `]'"));
+ return 0;
+ }
+ ++s;
+ }
+ return s;
+ }
+
+ if (float_format)
+ {
+ /* First try to treat expressions as floats. */
+ save_in = input_line_pointer;
+ input_line_pointer = s;
+ err = md_atof (float_format, (char *) token.u.flt.data,
+ &token.u.flt.length);
+ end = input_line_pointer;
+ input_line_pointer = save_in;
+ if (err && *err)
+ {
+ set_insn_error (0, err);
+ return 0;
+ }
+ if (s != end)
+ {
+ mips_add_token (&token, OT_FLOAT);
+ return end;
+ }
+ }
+
+ /* Treat everything else as an integer expression. */
+ token.u.integer.relocs[0] = BFD_RELOC_UNUSED;
+ token.u.integer.relocs[1] = BFD_RELOC_UNUSED;
+ token.u.integer.relocs[2] = BFD_RELOC_UNUSED;
+ my_getSmallExpression (&token.u.integer.value, token.u.integer.relocs, s);
+ s = expr_end;
+ mips_add_token (&token, OT_INTEGER);
+ return s;
+}
+
+/* S points to the operand list for an instruction. FLOAT_FORMAT is 'f'
+ if expressions should be treated as 32-bit floating-point constants,
+ 'd' if they should be treated as 64-bit floating-point constants,
+ or 0 if they should be treated as integer expressions (the usual case).
+
+ Return a list of tokens on success, otherwise return 0. The caller
+ must obstack_free the list after use. */
+
+static struct mips_operand_token *
+mips_parse_arguments (char *s, char float_format)
+{
+ struct mips_operand_token token;
+
+ SKIP_SPACE_TABS (s);
+ while (*s)
+ {
+ s = mips_parse_argument_token (s, float_format);
+ if (!s)
+ {
+ obstack_free (&mips_operand_tokens,
+ obstack_finish (&mips_operand_tokens));
+ return 0;
+ }
+ SKIP_SPACE_TABS (s);
+ }
+ mips_add_token (&token, OT_END);
+ return (struct mips_operand_token *) obstack_finish (&mips_operand_tokens);
+}
+
+/* Return TRUE if opcode MO is valid on the currently selected ISA, ASE
+ and architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
+
+static bfd_boolean
+is_opcode_valid (const struct mips_opcode *mo)
+{
+ int isa = mips_opts.isa;
+ int ase = mips_opts.ase;
+ int fp_s, fp_d;
+ unsigned int i;
+
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
+ for (i = 0; i < ARRAY_SIZE (mips_ases); i++)
+ if ((ase & mips_ases[i].flags) == mips_ases[i].flags)
+ ase |= mips_ases[i].flags64;
+
+ if (!opcode_is_member (mo, isa, ase, mips_opts.arch))
+ return FALSE;
+
+ /* Check whether the instruction or macro requires single-precision or
+ double-precision floating-point support. Note that this information is
+ stored differently in the opcode table for insns and macros. */
+ if (mo->pinfo == INSN_MACRO)
+ {
+ fp_s = mo->pinfo2 & INSN2_M_FP_S;
+ fp_d = mo->pinfo2 & INSN2_M_FP_D;
+ }
+ else
+ {
+ fp_s = mo->pinfo & FP_S;
+ fp_d = mo->pinfo & FP_D;
+ }
+
+ if (fp_d && (mips_opts.soft_float || mips_opts.single_float))
+ return FALSE;
+
+ if (fp_s && mips_opts.soft_float)
+ return FALSE;
+
+ return TRUE;
+}
+
+/* Return TRUE if the MIPS16 opcode MO is valid on the currently
+ selected ISA and architecture. */
+
+static bfd_boolean
+is_opcode_valid_16 (const struct mips_opcode *mo)
+{
+ return opcode_is_member (mo, mips_opts.isa, 0, mips_opts.arch);
+}
+
+/* Return TRUE if the size of the microMIPS opcode MO matches one
+ explicitly requested. Always TRUE in the standard MIPS mode. */
+
+static bfd_boolean
+is_size_valid (const struct mips_opcode *mo)
+{
+ if (!mips_opts.micromips)
+ return TRUE;
+
+ if (mips_opts.insn32)
+ {
+ if (mo->pinfo != INSN_MACRO && micromips_insn_length (mo) != 4)
+ return FALSE;
+ if ((mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0)
+ return FALSE;
+ }
+ if (!forced_insn_length)
+ return TRUE;
+ if (mo->pinfo == INSN_MACRO)
+ return FALSE;
+ return forced_insn_length == micromips_insn_length (mo);
+}
+
+/* Return TRUE if the microMIPS opcode MO is valid for the delay slot
+ of the preceding instruction. Always TRUE in the standard MIPS mode.
We don't accept macros in 16-bit delay slots to avoid a case where
a macro expansion fails because it relies on a preceding 32-bit real
return TRUE;
}
+/* For consistency checking, verify that all bits of OPCODE are specified
+ either by the match/mask part of the instruction definition, or by the
+ operand list. Also build up a list of operands in OPERANDS.
+
+ INSN_BITS says which bits of the instruction are significant.
+ If OPCODE is a standard or microMIPS instruction, DECODE_OPERAND
+ provides the mips_operand description of each operand. DECODE_OPERAND
+ is null for MIPS16 instructions. */
+
+static int
+validate_mips_insn (const struct mips_opcode *opcode,
+ unsigned long insn_bits,
+ const struct mips_operand *(*decode_operand) (const char *),
+ struct mips_operand_array *operands)
+{
+ const char *s;
+ unsigned long used_bits, doubled, undefined, opno, mask;
+ const struct mips_operand *operand;
+
+ mask = (opcode->pinfo == INSN_MACRO ? 0 : opcode->mask);
+ if ((mask & opcode->match) != opcode->match)
+ {
+ as_bad (_("internal: bad mips opcode (mask error): %s %s"),
+ opcode->name, opcode->args);
+ return 0;
+ }
+ used_bits = 0;
+ opno = 0;
+ if (opcode->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX)
+ used_bits = mips_insert_operand (&mips_vu0_channel_mask, used_bits, -1);
+ for (s = opcode->args; *s; ++s)
+ switch (*s)
+ {
+ case ',':
+ case '(':
+ case ')':
+ break;
+
+ case '#':
+ s++;
+ break;
+
+ default:
+ if (!decode_operand)
+ operand = decode_mips16_operand (*s, FALSE);
+ else
+ operand = decode_operand (s);
+ if (!operand && opcode->pinfo != INSN_MACRO)
+ {
+ as_bad (_("internal: unknown operand type: %s %s"),
+ opcode->name, opcode->args);
+ return 0;
+ }
+ gas_assert (opno < MAX_OPERANDS);
+ operands->operand[opno] = operand;
+ if (operand && operand->type != OP_VU0_MATCH_SUFFIX)
+ {
+ used_bits = mips_insert_operand (operand, used_bits, -1);
+ if (operand->type == OP_MDMX_IMM_REG)
+ /* Bit 5 is the format selector (OB vs QH). The opcode table
+ has separate entries for each format. */
+ used_bits &= ~(1 << (operand->lsb + 5));
+ if (operand->type == OP_ENTRY_EXIT_LIST)
+ used_bits &= ~(mask & 0x700);
+ }
+ /* Skip prefix characters. */
+ if (decode_operand && (*s == '+' || *s == 'm'))
+ ++s;
+ opno += 1;
+ break;
+ }
+ doubled = used_bits & mask & insn_bits;
+ if (doubled)
+ {
+ as_bad (_("internal: bad mips opcode (bits 0x%08lx doubly defined):"
+ " %s %s"), doubled, opcode->name, opcode->args);
+ return 0;
+ }
+ used_bits |= mask;
+ undefined = ~used_bits & insn_bits;
+ if (opcode->pinfo != INSN_MACRO && undefined)
+ {
+ as_bad (_("internal: bad mips opcode (bits 0x%08lx undefined): %s %s"),
+ undefined, opcode->name, opcode->args);
+ return 0;
+ }
+ used_bits &= ~insn_bits;
+ if (used_bits)
+ {
+ as_bad (_("internal: bad mips opcode (bits 0x%08lx defined): %s %s"),
+ used_bits, opcode->name, opcode->args);
+ return 0;
+ }
+ return 1;
+}
+
+/* The MIPS16 version of validate_mips_insn. */
+
+static int
+validate_mips16_insn (const struct mips_opcode *opcode,
+ struct mips_operand_array *operands)
+{
+ if (opcode->args[0] == 'a' || opcode->args[0] == 'i')
+ {
+ /* In this case OPCODE defines the first 16 bits in a 32-bit jump
+ instruction. Use TMP to describe the full instruction. */
+ struct mips_opcode tmp;
+
+ tmp = *opcode;
+ tmp.match <<= 16;
+ tmp.mask <<= 16;
+ return validate_mips_insn (&tmp, 0xffffffff, 0, operands);
+ }
+ return validate_mips_insn (opcode, 0xffff, 0, operands);
+}
+
+/* The microMIPS version of validate_mips_insn. */
+
+static int
+validate_micromips_insn (const struct mips_opcode *opc,
+ struct mips_operand_array *operands)
+{
+ unsigned long insn_bits;
+ unsigned long major;
+ unsigned int length;
+
+ if (opc->pinfo == INSN_MACRO)
+ return validate_mips_insn (opc, 0xffffffff, decode_micromips_operand,
+ operands);
+
+ length = micromips_insn_length (opc);
+ if (length != 2 && length != 4)
+ {
+ as_bad (_("internal error: bad microMIPS opcode (incorrect length: %u): "
+ "%s %s"), length, opc->name, opc->args);
+ return 0;
+ }
+ major = opc->match >> (10 + 8 * (length - 2));
+ if ((length == 2 && (major & 7) != 1 && (major & 6) != 2)
+ || (length == 4 && (major & 7) != 0 && (major & 4) != 4))
+ {
+ as_bad (_("internal error: bad microMIPS opcode "
+ "(opcode/length mismatch): %s %s"), opc->name, opc->args);
+ return 0;
+ }
+
+ /* Shift piecewise to avoid an overflow where unsigned long is 32-bit. */
+ insn_bits = 1 << 4 * length;
+ insn_bits <<= 4 * length;
+ insn_bits -= 1;
+ return validate_mips_insn (opc, insn_bits, decode_micromips_operand,
+ operands);
+}
+
/* This function is called once, at assembler startup time. It should set up
all the tables, etc. that the MD part of the assembler will need. */
}
if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_arch))
- as_warn (_("Could not set architecture and machine"));
+ as_warn (_("could not set architecture and machine"));
op_hash = hash_new ();
+ mips_operands = XCNEWVEC (struct mips_operand_array, NUMOPCODES);
for (i = 0; i < NUMOPCODES;)
{
const char *name = mips_opcodes[i].name;
fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
mips_opcodes[i].name, retval);
/* Probably a memory allocation problem? Give up now. */
- as_fatal (_("Broken assembler. No assembly attempted."));
+ as_fatal (_("broken assembler, no assembly attempted"));
}
do
{
- if (mips_opcodes[i].pinfo != INSN_MACRO)
+ if (!validate_mips_insn (&mips_opcodes[i], 0xffffffff,
+ decode_mips_operand, &mips_operands[i]))
+ broken = 1;
+ if (nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
{
- if (!validate_mips_insn (&mips_opcodes[i]))
- broken = 1;
- if (nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
- {
- create_insn (&nop_insn, mips_opcodes + i);
- if (mips_fix_loongson2f_nop)
- nop_insn.insn_opcode = LOONGSON2F_NOP_INSN;
- nop_insn.fixed_p = 1;
- }
+ create_insn (&nop_insn, mips_opcodes + i);
+ if (mips_fix_loongson2f_nop)
+ nop_insn.insn_opcode = LOONGSON2F_NOP_INSN;
+ nop_insn.fixed_p = 1;
}
++i;
}
}
mips16_op_hash = hash_new ();
+ mips16_operands = XCNEWVEC (struct mips_operand_array,
+ bfd_mips16_num_opcodes);
i = 0;
while (i < bfd_mips16_num_opcodes)
mips16_opcodes[i].name, retval);
do
{
- if (mips16_opcodes[i].pinfo != INSN_MACRO
- && ((mips16_opcodes[i].match & mips16_opcodes[i].mask)
- != mips16_opcodes[i].match))
- {
- fprintf (stderr, _("internal error: bad mips16 opcode: %s %s\n"),
- mips16_opcodes[i].name, mips16_opcodes[i].args);
- broken = 1;
- }
+ if (!validate_mips16_insn (&mips16_opcodes[i], &mips16_operands[i]))
+ broken = 1;
if (mips16_nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
{
create_insn (&mips16_nop_insn, mips16_opcodes + i);
}
micromips_op_hash = hash_new ();
+ micromips_operands = XCNEWVEC (struct mips_operand_array,
+ bfd_micromips_num_opcodes);
i = 0;
while (i < bfd_micromips_num_opcodes)
as_fatal (_("internal: can't hash `%s': %s"),
micromips_opcodes[i].name, retval);
do
- if (micromips_opcodes[i].pinfo != INSN_MACRO)
- {
- struct mips_cl_insn *micromips_nop_insn;
+ {
+ struct mips_cl_insn *micromips_nop_insn;
- if (!validate_micromips_insn (µmips_opcodes[i]))
- broken = 1;
+ if (!validate_micromips_insn (µmips_opcodes[i],
+ µmips_operands[i]))
+ broken = 1;
- if (micromips_insn_length (micromips_opcodes + i) == 2)
- micromips_nop_insn = µmips_nop16_insn;
- else if (micromips_insn_length (micromips_opcodes + i) == 4)
- micromips_nop_insn = µmips_nop32_insn;
- else
- continue;
+ if (micromips_opcodes[i].pinfo != INSN_MACRO)
+ {
+ if (micromips_insn_length (micromips_opcodes + i) == 2)
+ micromips_nop_insn = µmips_nop16_insn;
+ else if (micromips_insn_length (micromips_opcodes + i) == 4)
+ micromips_nop_insn = µmips_nop32_insn;
+ else
+ continue;
- if (micromips_nop_insn->insn_mo == NULL
- && strcmp (name, "nop") == 0)
- {
- create_insn (micromips_nop_insn, micromips_opcodes + i);
- micromips_nop_insn->fixed_p = 1;
- }
- }
+ if (micromips_nop_insn->insn_mo == NULL
+ && strcmp (name, "nop") == 0)
+ {
+ create_insn (micromips_nop_insn, micromips_opcodes + i);
+ micromips_nop_insn->fixed_p = 1;
+ }
+ }
+ }
while (++i < bfd_micromips_num_opcodes
&& strcmp (micromips_opcodes[i].name, name) == 0);
}
if (broken)
- as_fatal (_("Broken assembler. No assembly attempted."));
+ as_fatal (_("broken assembler, no assembly attempted"));
/* We add all the general register names to the symbol table. This
helps us detect invalid uses of them. */
reg_names_o32[i].num, /* & RNUM_MASK, */
&zero_address_frag));
+ for (i = 0; i < 32; i++)
+ {
+ char regname[7];
+
+ /* R5900 VU0 floating-point register. */
+ regname[sizeof (rename) - 1] = 0;
+ snprintf (regname, sizeof (regname) - 1, "$vf%d", i);
+ symbol_table_insert (symbol_new (regname, reg_section,
+ RTYPE_VF | i, &zero_address_frag));
+
+ /* R5900 VU0 integer register. */
+ snprintf (regname, sizeof (regname) - 1, "$vi%d", i);
+ symbol_table_insert (symbol_new (regname, reg_section,
+ RTYPE_VI | i, &zero_address_frag));
+
+ /* MSA register. */
+ snprintf (regname, sizeof (regname) - 1, "$w%d", i);
+ symbol_table_insert (symbol_new (regname, reg_section,
+ RTYPE_MSA | i, &zero_address_frag));
+ }
+
+ obstack_init (&mips_operand_tokens);
+
mips_no_prev_insn ();
mips_gprmask = 0;
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
imm_expr.X_op = O_absent;
- imm2_expr.X_op = O_absent;
offset_expr.X_op = O_absent;
- imm_reloc[0] = BFD_RELOC_UNUSED;
- imm_reloc[1] = BFD_RELOC_UNUSED;
- imm_reloc[2] = BFD_RELOC_UNUSED;
offset_reloc[0] = BFD_RELOC_UNUSED;
offset_reloc[1] = BFD_RELOC_UNUSED;
offset_reloc[2] = BFD_RELOC_UNUSED;
mips_mark_labels ();
mips_assembling_insn = TRUE;
+ clear_insn_error ();
if (mips_opts.mips16)
mips16_ip (str, &insn);
str, insn.insn_opcode));
}
- if (insn_error)
- as_bad ("%s `%s'", insn_error, str);
+ if (insn_error.msg)
+ report_insn_error (str);
else if (insn.insn_mo->pinfo == INSN_MACRO)
{
macro_start ();
}
else
{
- if (imm_expr.X_op != O_absent)
- append_insn (&insn, &imm_expr, imm_reloc, FALSE);
- else if (offset_expr.X_op != O_absent)
+ if (offset_expr.X_op != O_absent)
append_insn (&insn, &offset_expr, offset_reloc, FALSE);
else
append_insn (&insn, NULL, unused_reloc, FALSE);
&& fixp->fx_offset == fixp->fx_next->fx_offset);
}
-/* This function returns true if modifying a register requires a
- delay. */
-
-static int
-reg_needs_delay (unsigned int reg)
-{
- unsigned long prev_pinfo;
-
- prev_pinfo = history[0].insn_mo->pinfo;
- if (! mips_opts.noreorder
- && (((prev_pinfo & INSN_LOAD_MEMORY_DELAY)
- && ! gpr_interlocks)
- || ((prev_pinfo & INSN_LOAD_COPROC_DELAY)
- && ! cop_interlocks)))
- {
- /* A load from a coprocessor or from memory. All load delays
- delay the use of general register rt for one instruction. */
- /* Itbl support may require additional care here. */
- know (prev_pinfo & INSN_WRITE_GPR_T);
- if (reg == EXTRACT_OPERAND (mips_opts.micromips, RT, history[0]))
- return 1;
- }
-
- return 0;
-}
-
/* Move all labels in LABELS to the current insertion point. TEXT_P
says whether the labels refer to text or data. */
static inline bfd_boolean
compact_branch_p (const struct mips_cl_insn *ip)
{
- if (mips_opts.mips16)
- return (ip->insn_mo->pinfo & (MIPS16_INSN_UNCOND_BRANCH
- | MIPS16_INSN_COND_BRANCH)) != 0;
- else
- return (ip->insn_mo->pinfo2 & (INSN2_UNCOND_BRANCH
- | INSN2_COND_BRANCH)) != 0;
+ return (ip->insn_mo->pinfo2 & (INSN2_UNCOND_BRANCH
+ | INSN2_COND_BRANCH)) != 0;
}
/* Return true if IP is an unconditional branch or jump. */
uncond_branch_p (const struct mips_cl_insn *ip)
{
return ((ip->insn_mo->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0
- || (mips_opts.mips16
- ? (ip->insn_mo->pinfo & MIPS16_INSN_UNCOND_BRANCH) != 0
- : (ip->insn_mo->pinfo2 & INSN2_UNCOND_BRANCH) != 0));
+ || (ip->insn_mo->pinfo2 & INSN2_UNCOND_BRANCH) != 0);
}
/* Return true if IP is a branch-likely instruction. */
return NOP_INSN;
}
-/* Return the mask of core registers that IP reads or writes. */
+/* Return a mask that has bit N set if OPCODE reads the register(s)
+ in operand N. */
static unsigned int
-gpr_mod_mask (const struct mips_cl_insn *ip)
+insn_read_mask (const struct mips_opcode *opcode)
{
- unsigned long pinfo2;
- unsigned int mask;
-
- mask = 0;
- pinfo2 = ip->insn_mo->pinfo2;
- if (mips_opts.micromips)
- {
- if (pinfo2 & INSN2_MOD_GPR_MD)
- mask |= 1 << micromips_to_32_reg_d_map[EXTRACT_OPERAND (1, MD, *ip)];
- if (pinfo2 & INSN2_MOD_GPR_MF)
- mask |= 1 << micromips_to_32_reg_f_map[EXTRACT_OPERAND (1, MF, *ip)];
- if (pinfo2 & INSN2_MOD_SP)
- mask |= 1 << SP;
- }
- return mask;
+ return (opcode->pinfo & INSN_READ_ALL) >> INSN_READ_SHIFT;
}
-/* Return the mask of core registers that IP reads. */
+/* Return a mask that has bit N set if OPCODE writes to the register(s)
+ in operand N. */
static unsigned int
-gpr_read_mask (const struct mips_cl_insn *ip)
+insn_write_mask (const struct mips_opcode *opcode)
{
- unsigned long pinfo, pinfo2;
- unsigned int mask;
+ return (opcode->pinfo & INSN_WRITE_ALL) >> INSN_WRITE_SHIFT;
+}
- mask = gpr_mod_mask (ip);
- pinfo = ip->insn_mo->pinfo;
- pinfo2 = ip->insn_mo->pinfo2;
- if (mips_opts.mips16)
+/* Return a mask of the registers specified by operand OPERAND of INSN.
+ Ignore registers of type OP_REG_<t> unless bit OP_REG_<t> of TYPE_MASK
+ is set. */
+
+static unsigned int
+operand_reg_mask (const struct mips_cl_insn *insn,
+ const struct mips_operand *operand,
+ unsigned int type_mask)
+{
+ unsigned int uval, vsel;
+
+ switch (operand->type)
{
- if (pinfo & MIPS16_INSN_READ_X)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)];
- if (pinfo & MIPS16_INSN_READ_Y)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)];
- if (pinfo & MIPS16_INSN_READ_T)
- mask |= 1 << TREG;
- if (pinfo & MIPS16_INSN_READ_SP)
- mask |= 1 << SP;
- if (pinfo & MIPS16_INSN_READ_31)
- mask |= 1 << RA;
- if (pinfo & MIPS16_INSN_READ_Z)
- mask |= 1 << (mips16_to_32_reg_map
- [MIPS16_EXTRACT_OPERAND (MOVE32Z, *ip)]);
- if (pinfo & MIPS16_INSN_READ_GPR_X)
- mask |= 1 << MIPS16_EXTRACT_OPERAND (REGR32, *ip);
+ case OP_INT:
+ case OP_MAPPED_INT:
+ case OP_MSB:
+ case OP_PCREL:
+ case OP_PERF_REG:
+ case OP_ADDIUSP_INT:
+ case OP_ENTRY_EXIT_LIST:
+ case OP_REPEAT_DEST_REG:
+ case OP_REPEAT_PREV_REG:
+ case OP_PC:
+ case OP_VU0_SUFFIX:
+ case OP_VU0_MATCH_SUFFIX:
+ case OP_IMM_INDEX:
+ abort ();
+
+ case OP_REG:
+ case OP_OPTIONAL_REG:
+ {
+ const struct mips_reg_operand *reg_op;
+
+ reg_op = (const struct mips_reg_operand *) operand;
+ if (!(type_mask & (1 << reg_op->reg_type)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ return 1 << mips_decode_reg_operand (reg_op, uval);
+ }
+
+ case OP_REG_PAIR:
+ {
+ const struct mips_reg_pair_operand *pair_op;
+
+ pair_op = (const struct mips_reg_pair_operand *) operand;
+ if (!(type_mask & (1 << pair_op->reg_type)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ return (1 << pair_op->reg1_map[uval]) | (1 << pair_op->reg2_map[uval]);
+ }
+
+ case OP_CLO_CLZ_DEST:
+ if (!(type_mask & (1 << OP_REG_GP)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ return (1 << (uval & 31)) | (1 << (uval >> 5));
+
+ case OP_LWM_SWM_LIST:
+ abort ();
+
+ case OP_SAVE_RESTORE_LIST:
+ abort ();
+
+ case OP_MDMX_IMM_REG:
+ if (!(type_mask & (1 << OP_REG_VEC)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ vsel = uval >> 5;
+ if ((vsel & 0x18) == 0x18)
+ return 0;
+ return 1 << (uval & 31);
+
+ case OP_REG_INDEX:
+ if (!(type_mask & (1 << OP_REG_GP)))
+ return 0;
+ return 1 << insn_extract_operand (insn, operand);
}
- else
+ abort ();
+}
+
+/* Return a mask of the registers specified by operands OPNO_MASK of INSN,
+ where bit N of OPNO_MASK is set if operand N should be included.
+ Ignore registers of type OP_REG_<t> unless bit OP_REG_<t> of TYPE_MASK
+ is set. */
+
+static unsigned int
+insn_reg_mask (const struct mips_cl_insn *insn,
+ unsigned int type_mask, unsigned int opno_mask)
+{
+ unsigned int opno, reg_mask;
+
+ opno = 0;
+ reg_mask = 0;
+ while (opno_mask != 0)
{
- if (pinfo2 & INSN2_READ_GPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
- if (pinfo & INSN_READ_GPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
- if (pinfo & INSN_READ_GPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
- if (pinfo2 & INSN2_READ_GP)
- mask |= 1 << GP;
- if (pinfo2 & INSN2_READ_GPR_31)
- mask |= 1 << RA;
- if (pinfo2 & INSN2_READ_GPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RZ, *ip);
+ if (opno_mask & 1)
+ reg_mask |= operand_reg_mask (insn, insn_opno (insn, opno), type_mask);
+ opno_mask >>= 1;
+ opno += 1;
}
- if (mips_opts.micromips)
+ return reg_mask;
+}
+
+/* Return the mask of core registers that IP reads. */
+
+static unsigned int
+gpr_read_mask (const struct mips_cl_insn *ip)
+{
+ unsigned long pinfo, pinfo2;
+ unsigned int mask;
+
+ mask = insn_reg_mask (ip, 1 << OP_REG_GP, insn_read_mask (ip->insn_mo));
+ pinfo = ip->insn_mo->pinfo;
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (pinfo & INSN_UDI)
{
- if (pinfo2 & INSN2_READ_GPR_MC)
- mask |= 1 << micromips_to_32_reg_c_map[EXTRACT_OPERAND (1, MC, *ip)];
- if (pinfo2 & INSN2_READ_GPR_ME)
- mask |= 1 << micromips_to_32_reg_e_map[EXTRACT_OPERAND (1, ME, *ip)];
- if (pinfo2 & INSN2_READ_GPR_MG)
- mask |= 1 << micromips_to_32_reg_g_map[EXTRACT_OPERAND (1, MG, *ip)];
- if (pinfo2 & INSN2_READ_GPR_MJ)
- mask |= 1 << EXTRACT_OPERAND (1, MJ, *ip);
- if (pinfo2 & INSN2_READ_GPR_MMN)
- {
- mask |= 1 << micromips_to_32_reg_m_map[EXTRACT_OPERAND (1, MM, *ip)];
- mask |= 1 << micromips_to_32_reg_n_map[EXTRACT_OPERAND (1, MN, *ip)];
- }
- if (pinfo2 & INSN2_READ_GPR_MP)
- mask |= 1 << EXTRACT_OPERAND (1, MP, *ip);
- if (pinfo2 & INSN2_READ_GPR_MQ)
- mask |= 1 << micromips_to_32_reg_q_map[EXTRACT_OPERAND (1, MQ, *ip)];
+ /* UDI instructions have traditionally been assumed to read RS
+ and RT. */
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
}
+ if (pinfo & INSN_READ_GPR_24)
+ mask |= 1 << 24;
+ if (pinfo2 & INSN2_READ_GPR_16)
+ mask |= 1 << 16;
+ if (pinfo2 & INSN2_READ_SP)
+ mask |= 1 << SP;
+ if (pinfo2 & INSN2_READ_GPR_31)
+ mask |= 1 << 31;
/* Don't include register 0. */
return mask & ~1;
}
unsigned long pinfo, pinfo2;
unsigned int mask;
- mask = gpr_mod_mask (ip);
+ mask = insn_reg_mask (ip, 1 << OP_REG_GP, insn_write_mask (ip->insn_mo));
pinfo = ip->insn_mo->pinfo;
pinfo2 = ip->insn_mo->pinfo2;
- if (mips_opts.mips16)
- {
- if (pinfo & MIPS16_INSN_WRITE_X)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)];
- if (pinfo & MIPS16_INSN_WRITE_Y)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)];
- if (pinfo & MIPS16_INSN_WRITE_Z)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RZ, *ip)];
- if (pinfo & MIPS16_INSN_WRITE_T)
- mask |= 1 << TREG;
- if (pinfo & MIPS16_INSN_WRITE_SP)
- mask |= 1 << SP;
- if (pinfo & MIPS16_INSN_WRITE_31)
- mask |= 1 << RA;
- if (pinfo & MIPS16_INSN_WRITE_GPR_Y)
- mask |= 1 << MIPS16OP_EXTRACT_REG32R (ip->insn_opcode);
- }
- else
- {
- if (pinfo & INSN_WRITE_GPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
- if (pinfo & INSN_WRITE_GPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
- if (pinfo & INSN_WRITE_GPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
- if (pinfo & INSN_WRITE_GPR_31)
- mask |= 1 << RA;
- if (pinfo2 & INSN2_WRITE_GPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RZ, *ip);
- }
- if (mips_opts.micromips)
- {
- if (pinfo2 & INSN2_WRITE_GPR_MB)
- mask |= 1 << micromips_to_32_reg_b_map[EXTRACT_OPERAND (1, MB, *ip)];
- if (pinfo2 & INSN2_WRITE_GPR_MH)
- {
- mask |= 1 << micromips_to_32_reg_h_map1[EXTRACT_OPERAND (1, MH, *ip)];
- mask |= 1 << micromips_to_32_reg_h_map2[EXTRACT_OPERAND (1, MH, *ip)];
- }
- if (pinfo2 & INSN2_WRITE_GPR_MJ)
- mask |= 1 << EXTRACT_OPERAND (1, MJ, *ip);
- if (pinfo2 & INSN2_WRITE_GPR_MP)
- mask |= 1 << EXTRACT_OPERAND (1, MP, *ip);
- }
+ if (pinfo & INSN_WRITE_GPR_24)
+ mask |= 1 << 24;
+ if (pinfo & INSN_WRITE_GPR_31)
+ mask |= 1 << 31;
+ if (pinfo & INSN_UDI)
+ /* UDI instructions have traditionally been assumed to write to RD. */
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
+ if (pinfo2 & INSN2_WRITE_SP)
+ mask |= 1 << SP;
/* Don't include register 0. */
return mask & ~1;
}
static unsigned int
fpr_read_mask (const struct mips_cl_insn *ip)
{
- unsigned long pinfo, pinfo2;
+ unsigned long pinfo;
unsigned int mask;
- mask = 0;
+ mask = insn_reg_mask (ip, ((1 << OP_REG_FP) | (1 << OP_REG_VEC)
+ | (1 << OP_REG_MSA)),
+ insn_read_mask (ip->insn_mo));
pinfo = ip->insn_mo->pinfo;
- pinfo2 = ip->insn_mo->pinfo2;
- if (!mips_opts.mips16)
- {
- if (pinfo2 & INSN2_READ_FPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FD, *ip);
- if (pinfo & INSN_READ_FPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FS, *ip);
- if (pinfo & INSN_READ_FPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FT, *ip);
- if (pinfo & INSN_READ_FPR_R)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FR, *ip);
- if (pinfo2 & INSN2_READ_FPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FZ, *ip);
- }
/* Conservatively treat all operands to an FP_D instruction are doubles.
(This is overly pessimistic for things like cvt.d.s.) */
if (HAVE_32BIT_FPRS && (pinfo & FP_D))
static unsigned int
fpr_write_mask (const struct mips_cl_insn *ip)
{
- unsigned long pinfo, pinfo2;
+ unsigned long pinfo;
unsigned int mask;
- mask = 0;
+ mask = insn_reg_mask (ip, ((1 << OP_REG_FP) | (1 << OP_REG_VEC)
+ | (1 << OP_REG_MSA)),
+ insn_write_mask (ip->insn_mo));
pinfo = ip->insn_mo->pinfo;
- pinfo2 = ip->insn_mo->pinfo2;
- if (!mips_opts.mips16)
- {
- if (pinfo & INSN_WRITE_FPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FD, *ip);
- if (pinfo & INSN_WRITE_FPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FS, *ip);
- if (pinfo & INSN_WRITE_FPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FT, *ip);
- if (pinfo2 & INSN2_WRITE_FPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FZ, *ip);
- }
/* Conservatively treat all operands to an FP_D instruction are doubles.
(This is overly pessimistic for things like cvt.s.d.) */
if (HAVE_32BIT_FPRS && (pinfo & FP_D))
return mask;
}
-/* Classify an instruction according to the FIX_VR4120_* enumeration.
- Return NUM_FIX_VR4120_CLASSES if the instruction isn't affected
- by VR4120 errata. */
+/* Operand OPNUM of INSN is an odd-numbered floating-point register.
+ Check whether that is allowed. */
-static unsigned int
-classify_vr4120_insn (const char *name)
+static bfd_boolean
+mips_oddfpreg_ok (const struct mips_opcode *insn, int opnum)
{
- if (strncmp (name, "macc", 4) == 0)
- return FIX_VR4120_MACC;
- if (strncmp (name, "dmacc", 5) == 0)
- return FIX_VR4120_DMACC;
- if (strncmp (name, "mult", 4) == 0)
- return FIX_VR4120_MULT;
- if (strncmp (name, "dmult", 5) == 0)
- return FIX_VR4120_DMULT;
- if (strstr (name, "div"))
- return FIX_VR4120_DIV;
- if (strcmp (name, "mtlo") == 0 || strcmp (name, "mthi") == 0)
- return FIX_VR4120_MTHILO;
- return NUM_FIX_VR4120_CLASSES;
+ const char *s = insn->name;
+
+ if (insn->pinfo == INSN_MACRO)
+ /* Let a macro pass, we'll catch it later when it is expanded. */
+ return TRUE;
+
+ if (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa) || mips_opts.arch == CPU_R5900)
+ {
+ /* Allow odd registers for single-precision ops. */
+ switch (insn->pinfo & (FP_S | FP_D))
+ {
+ case FP_S:
+ case 0:
+ return TRUE;
+ case FP_D:
+ return FALSE;
+ default:
+ break;
+ }
+
+ /* Cvt.w.x and cvt.x.w allow an odd register for a 'w' or 's' operand. */
+ s = strchr (insn->name, '.');
+ if (s != NULL && opnum == 2)
+ s = strchr (s + 1, '.');
+ return (s != NULL && (s[1] == 'w' || s[1] == 's'));
+ }
+
+ /* Single-precision coprocessor loads and moves are OK too. */
+ if ((insn->pinfo & FP_S)
+ && (insn->pinfo & (INSN_COPROC_MEMORY_DELAY | INSN_STORE_MEMORY
+ | INSN_LOAD_COPROC_DELAY | INSN_COPROC_MOVE_DELAY)))
+ return TRUE;
+
+ return FALSE;
}
-#define INSN_ERET 0x42000018
-#define INSN_DERET 0x4200001f
+/* Information about an instruction argument that we're trying to match. */
+struct mips_arg_info
+{
+ /* The instruction so far. */
+ struct mips_cl_insn *insn;
-/* Return the number of instructions that must separate INSN1 and INSN2,
- where INSN1 is the earlier instruction. Return the worst-case value
- for any INSN2 if INSN2 is null. */
+ /* The first unconsumed operand token. */
+ struct mips_operand_token *token;
-static unsigned int
-insns_between (const struct mips_cl_insn *insn1,
- const struct mips_cl_insn *insn2)
+ /* The 1-based operand number, in terms of insn->insn_mo->args. */
+ int opnum;
+
+ /* The 1-based argument number, for error reporting. This does not
+ count elided optional registers, etc.. */
+ int argnum;
+
+ /* The last OP_REG operand seen, or ILLEGAL_REG if none. */
+ unsigned int last_regno;
+
+ /* If the first operand was an OP_REG, this is the register that it
+ specified, otherwise it is ILLEGAL_REG. */
+ unsigned int dest_regno;
+
+ /* The value of the last OP_INT operand. Only used for OP_MSB,
+ where it gives the lsb position. */
+ unsigned int last_op_int;
+
+ /* If true, match routines should assume that no later instruction
+ alternative matches and should therefore be as accomodating as
+ possible. Match routines should not report errors if something
+ is only invalid for !LAX_MATCH. */
+ bfd_boolean lax_match;
+
+ /* True if a reference to the current AT register was seen. */
+ bfd_boolean seen_at;
+};
+
+/* Record that the argument is out of range. */
+
+static void
+match_out_of_range (struct mips_arg_info *arg)
{
- unsigned long pinfo1, pinfo2;
- unsigned int mask;
+ set_insn_error_i (arg->argnum, _("operand %d out of range"), arg->argnum);
+}
- /* This function needs to know which pinfo flags are set for INSN2
- and which registers INSN2 uses. The former is stored in PINFO2 and
- the latter is tested via INSN2_USES_GPR. If INSN2 is null, PINFO2
- will have every flag set and INSN2_USES_GPR will always return true. */
- pinfo1 = insn1->insn_mo->pinfo;
- pinfo2 = insn2 ? insn2->insn_mo->pinfo : ~0U;
+/* Record that the argument isn't constant but needs to be. */
-#define INSN2_USES_GPR(REG) \
- (insn2 == NULL || (gpr_read_mask (insn2) & (1U << (REG))) != 0)
+static void
+match_not_constant (struct mips_arg_info *arg)
+{
+ set_insn_error_i (arg->argnum, _("operand %d must be constant"),
+ arg->argnum);
+}
- /* For most targets, write-after-read dependencies on the HI and LO
- registers must be separated by at least two instructions. */
- if (!hilo_interlocks)
+/* Try to match an OT_CHAR token for character CH. Consume the token
+ and return true on success, otherwise return false. */
+
+static bfd_boolean
+match_char (struct mips_arg_info *arg, char ch)
+{
+ if (arg->token->type == OT_CHAR && arg->token->u.ch == ch)
{
- if ((pinfo1 & INSN_READ_LO) && (pinfo2 & INSN_WRITE_LO))
- return 2;
- if ((pinfo1 & INSN_READ_HI) && (pinfo2 & INSN_WRITE_HI))
- return 2;
+ ++arg->token;
+ if (ch == ',')
+ arg->argnum += 1;
+ return TRUE;
}
+ return FALSE;
+}
- /* If we're working around r7000 errata, there must be two instructions
- between an mfhi or mflo and any instruction that uses the result. */
- if (mips_7000_hilo_fix
- && !mips_opts.micromips
- && MF_HILO_INSN (pinfo1)
- && INSN2_USES_GPR (EXTRACT_OPERAND (0, RD, *insn1)))
- return 2;
+/* Try to get an expression from the next tokens in ARG. Consume the
+ tokens and return true on success, storing the expression value in
+ VALUE and relocation types in R. */
- /* If we're working around 24K errata, one instruction is required
- if an ERET or DERET is followed by a branch instruction. */
- if (mips_fix_24k && !mips_opts.micromips)
+static bfd_boolean
+match_expression (struct mips_arg_info *arg, expressionS *value,
+ bfd_reloc_code_real_type *r)
+{
+ /* If the next token is a '(' that was parsed as being part of a base
+ expression, assume we have an elided offset. The later match will fail
+ if this turns out to be wrong. */
+ if (arg->token->type == OT_CHAR && arg->token->u.ch == '(')
{
- if (insn1->insn_opcode == INSN_ERET
- || insn1->insn_opcode == INSN_DERET)
- {
- if (insn2 == NULL
- || insn2->insn_opcode == INSN_ERET
- || insn2->insn_opcode == INSN_DERET
- || delayed_branch_p (insn2))
- return 1;
- }
+ value->X_op = O_constant;
+ value->X_add_number = 0;
+ r[0] = r[1] = r[2] = BFD_RELOC_UNUSED;
+ return TRUE;
}
- /* If working around VR4120 errata, check for combinations that need
- a single intervening instruction. */
- if (mips_fix_vr4120 && !mips_opts.micromips)
+ /* Reject register-based expressions such as "0+$2" and "(($2))".
+ For plain registers the default error seems more appropriate. */
+ if (arg->token->type == OT_INTEGER
+ && arg->token->u.integer.value.X_op == O_register)
{
- unsigned int class1, class2;
-
- class1 = classify_vr4120_insn (insn1->insn_mo->name);
- if (class1 != NUM_FIX_VR4120_CLASSES && vr4120_conflicts[class1] != 0)
- {
- if (insn2 == NULL)
- return 1;
- class2 = classify_vr4120_insn (insn2->insn_mo->name);
- if (vr4120_conflicts[class1] & (1 << class2))
- return 1;
- }
+ set_insn_error (arg->argnum, _("register value used as expression"));
+ return FALSE;
}
- if (!HAVE_CODE_COMPRESSION)
+ if (arg->token->type == OT_INTEGER)
{
- /* Check for GPR or coprocessor load delays. All such delays
- are on the RT register. */
- /* Itbl support may require additional care here. */
- if ((!gpr_interlocks && (pinfo1 & INSN_LOAD_MEMORY_DELAY))
- || (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC_DELAY)))
- {
- know (pinfo1 & INSN_WRITE_GPR_T);
- if (INSN2_USES_GPR (EXTRACT_OPERAND (0, RT, *insn1)))
- return 1;
- }
+ *value = arg->token->u.integer.value;
+ memcpy (r, arg->token->u.integer.relocs, 3 * sizeof (*r));
+ ++arg->token;
+ return TRUE;
+ }
- /* Check for generic coprocessor hazards.
+ set_insn_error_i
+ (arg->argnum, _("operand %d must be an immediate expression"),
+ arg->argnum);
+ return FALSE;
+}
- This case is not handled very well. There is no special
- knowledge of CP0 handling, and the coprocessors other than
- the floating point unit are not distinguished at all. */
- /* Itbl support may require additional care here. FIXME!
- Need to modify this to include knowledge about
- user specified delays! */
- else if ((!cop_interlocks && (pinfo1 & INSN_COPROC_MOVE_DELAY))
- || (!cop_mem_interlocks && (pinfo1 & INSN_COPROC_MEMORY_DELAY)))
- {
- /* Handle cases where INSN1 writes to a known general coprocessor
- register. There must be a one instruction delay before INSN2
- if INSN2 reads that register, otherwise no delay is needed. */
- mask = fpr_write_mask (insn1);
- if (mask != 0)
- {
- if (!insn2 || (mask & fpr_read_mask (insn2)) != 0)
- return 1;
- }
- else
- {
- /* Read-after-write dependencies on the control registers
- require a two-instruction gap. */
- if ((pinfo1 & INSN_WRITE_COND_CODE)
- && (pinfo2 & INSN_READ_COND_CODE))
- return 2;
+/* Try to get a constant expression from the next tokens in ARG. Consume
+ the tokens and return return true on success, storing the constant value
+ in *VALUE. Use FALLBACK as the value if the match succeeded with an
+ error. */
- /* We don't know exactly what INSN1 does. If INSN2 is
- also a coprocessor instruction, assume there must be
- a one instruction gap. */
- if (pinfo2 & INSN_COP)
- return 1;
- }
- }
+static bfd_boolean
+match_const_int (struct mips_arg_info *arg, offsetT *value)
+{
+ expressionS ex;
+ bfd_reloc_code_real_type r[3];
- /* Check for read-after-write dependencies on the coprocessor
- control registers in cases where INSN1 does not need a general
- coprocessor delay. This means that INSN1 is a floating point
- comparison instruction. */
- /* Itbl support may require additional care here. */
- else if (!cop_interlocks
- && (pinfo1 & INSN_WRITE_COND_CODE)
- && (pinfo2 & INSN_READ_COND_CODE))
- return 1;
+ if (!match_expression (arg, &ex, r))
+ return FALSE;
+
+ if (r[0] == BFD_RELOC_UNUSED && ex.X_op == O_constant)
+ *value = ex.X_add_number;
+ else
+ {
+ match_not_constant (arg);
+ return FALSE;
}
+ return TRUE;
+}
-#undef INSN2_USES_GPR
+/* Return the RTYPE_* flags for a register operand of type TYPE that
+ appears in instruction OPCODE. */
- return 0;
+static unsigned int
+convert_reg_type (const struct mips_opcode *opcode,
+ enum mips_reg_operand_type type)
+{
+ switch (type)
+ {
+ case OP_REG_GP:
+ return RTYPE_NUM | RTYPE_GP;
+
+ case OP_REG_FP:
+ /* Allow vector register names for MDMX if the instruction is a 64-bit
+ FPR load, store or move (including moves to and from GPRs). */
+ if ((mips_opts.ase & ASE_MDMX)
+ && (opcode->pinfo & FP_D)
+ && (opcode->pinfo & (INSN_COPROC_MOVE_DELAY
+ | INSN_COPROC_MEMORY_DELAY
+ | INSN_LOAD_COPROC_DELAY
+ | INSN_LOAD_MEMORY_DELAY
+ | INSN_STORE_MEMORY)))
+ return RTYPE_FPU | RTYPE_VEC;
+ return RTYPE_FPU;
+
+ case OP_REG_CCC:
+ if (opcode->pinfo & (FP_D | FP_S))
+ return RTYPE_CCC | RTYPE_FCC;
+ return RTYPE_CCC;
+
+ case OP_REG_VEC:
+ if (opcode->membership & INSN_5400)
+ return RTYPE_FPU;
+ return RTYPE_FPU | RTYPE_VEC;
+
+ case OP_REG_ACC:
+ return RTYPE_ACC;
+
+ case OP_REG_COPRO:
+ if (opcode->name[strlen (opcode->name) - 1] == '0')
+ return RTYPE_NUM | RTYPE_CP0;
+ return RTYPE_NUM;
+
+ case OP_REG_HW:
+ return RTYPE_NUM;
+
+ case OP_REG_VI:
+ return RTYPE_NUM | RTYPE_VI;
+
+ case OP_REG_VF:
+ return RTYPE_NUM | RTYPE_VF;
+
+ case OP_REG_R5900_I:
+ return RTYPE_R5900_I;
+
+ case OP_REG_R5900_Q:
+ return RTYPE_R5900_Q;
+
+ case OP_REG_R5900_R:
+ return RTYPE_R5900_R;
+
+ case OP_REG_R5900_ACC:
+ return RTYPE_R5900_ACC;
+
+ case OP_REG_MSA:
+ return RTYPE_MSA;
+
+ case OP_REG_MSA_CTRL:
+ return RTYPE_NUM;
+ }
+ abort ();
}
-/* Return the number of nops that would be needed to work around the
- VR4130 mflo/mfhi errata if instruction INSN immediately followed
- the MAX_VR4130_NOPS instructions described by HIST. Ignore hazards
- that are contained within the first IGNORE instructions of HIST. */
+/* ARG is register REGNO, of type TYPE. Warn about any dubious registers. */
-static int
-nops_for_vr4130 (int ignore, const struct mips_cl_insn *hist,
- const struct mips_cl_insn *insn)
+static void
+check_regno (struct mips_arg_info *arg,
+ enum mips_reg_operand_type type, unsigned int regno)
{
- int i, j;
- unsigned int mask;
+ if (AT && type == OP_REG_GP && regno == AT)
+ arg->seen_at = TRUE;
- /* Check if the instruction writes to HI or LO. MTHI and MTLO
- are not affected by the errata. */
- if (insn != 0
- && ((insn->insn_mo->pinfo & (INSN_WRITE_HI | INSN_WRITE_LO)) == 0
- || strcmp (insn->insn_mo->name, "mtlo") == 0
- || strcmp (insn->insn_mo->name, "mthi") == 0))
- return 0;
+ if (type == OP_REG_FP
+ && (regno & 1) != 0
+ && HAVE_32BIT_FPRS
+ && !mips_oddfpreg_ok (arg->insn->insn_mo, arg->opnum))
+ as_warn (_("float register should be even, was %d"), regno);
- /* Search for the first MFLO or MFHI. */
- for (i = 0; i < MAX_VR4130_NOPS; i++)
- if (MF_HILO_INSN (hist[i].insn_mo->pinfo))
- {
- /* Extract the destination register. */
- mask = gpr_write_mask (&hist[i]);
+ if (type == OP_REG_CCC)
+ {
+ const char *name;
+ size_t length;
+
+ name = arg->insn->insn_mo->name;
+ length = strlen (name);
+ if ((regno & 1) != 0
+ && ((length >= 3 && strcmp (name + length - 3, ".ps") == 0)
+ || (length >= 5 && strncmp (name + length - 5, "any2", 4) == 0)))
+ as_warn (_("condition code register should be even for %s, was %d"),
+ name, regno);
+
+ if ((regno & 3) != 0
+ && (length >= 5 && strncmp (name + length - 5, "any4", 4) == 0))
+ as_warn (_("condition code register should be 0 or 4 for %s, was %d"),
+ name, regno);
+ }
+}
- /* No nops are needed if INSN reads that register. */
- if (insn != NULL && (gpr_read_mask (insn) & mask) != 0)
- return 0;
+/* ARG is a register with symbol value SYMVAL. Try to interpret it as
+ a register of type TYPE. Return true on success, storing the register
+ number in *REGNO and warning about any dubious uses. */
- /* ...or if any of the intervening instructions do. */
- for (j = 0; j < i; j++)
- if (gpr_read_mask (&hist[j]) & mask)
- return 0;
+static bfd_boolean
+match_regno (struct mips_arg_info *arg, enum mips_reg_operand_type type,
+ unsigned int symval, unsigned int *regno)
+{
+ if (type == OP_REG_VEC)
+ symval = mips_prefer_vec_regno (symval);
+ if (!(symval & convert_reg_type (arg->insn->insn_mo, type)))
+ return FALSE;
- if (i >= ignore)
- return MAX_VR4130_NOPS - i;
- }
- return 0;
+ *regno = symval & RNUM_MASK;
+ check_regno (arg, type, *regno);
+ return TRUE;
}
-#define BASE_REG_EQ(INSN1, INSN2) \
- ((((INSN1) >> OP_SH_RS) & OP_MASK_RS) \
- == (((INSN2) >> OP_SH_RS) & OP_MASK_RS))
+/* Try to interpret the next token in ARG as a register of type TYPE.
+ Consume the token and return true on success, storing the register
+ number in *REGNO. Return false on failure. */
-/* Return the minimum alignment for this store instruction. */
+static bfd_boolean
+match_reg (struct mips_arg_info *arg, enum mips_reg_operand_type type,
+ unsigned int *regno)
+{
+ if (arg->token->type == OT_REG
+ && match_regno (arg, type, arg->token->u.regno, regno))
+ {
+ ++arg->token;
+ return TRUE;
+ }
+ return FALSE;
+}
-static int
-fix_24k_align_to (const struct mips_opcode *mo)
+/* Try to interpret the next token in ARG as a range of registers of type TYPE.
+ Consume the token and return true on success, storing the register numbers
+ in *REGNO1 and *REGNO2. Return false on failure. */
+
+static bfd_boolean
+match_reg_range (struct mips_arg_info *arg, enum mips_reg_operand_type type,
+ unsigned int *regno1, unsigned int *regno2)
{
- if (strcmp (mo->name, "sh") == 0)
- return 2;
+ if (match_reg (arg, type, regno1))
+ {
+ *regno2 = *regno1;
+ return TRUE;
+ }
+ if (arg->token->type == OT_REG_RANGE
+ && match_regno (arg, type, arg->token->u.reg_range.regno1, regno1)
+ && match_regno (arg, type, arg->token->u.reg_range.regno2, regno2)
+ && *regno1 <= *regno2)
+ {
+ ++arg->token;
+ return TRUE;
+ }
+ return FALSE;
+}
- if (strcmp (mo->name, "swc1") == 0
- || strcmp (mo->name, "swc2") == 0
- || strcmp (mo->name, "sw") == 0
- || strcmp (mo->name, "sc") == 0
- || strcmp (mo->name, "s.s") == 0)
- return 4;
+/* OP_INT matcher. */
- if (strcmp (mo->name, "sdc1") == 0
- || strcmp (mo->name, "sdc2") == 0
- || strcmp (mo->name, "s.d") == 0)
- return 8;
+static bfd_boolean
+match_int_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand_base)
+{
+ const struct mips_int_operand *operand;
+ unsigned int uval;
+ int min_val, max_val, factor;
+ offsetT sval;
+
+ operand = (const struct mips_int_operand *) operand_base;
+ factor = 1 << operand->shift;
+ min_val = mips_int_operand_min (operand);
+ max_val = mips_int_operand_max (operand);
+
+ if (operand_base->lsb == 0
+ && operand_base->size == 16
+ && operand->shift == 0
+ && operand->bias == 0
+ && (operand->max_val == 32767 || operand->max_val == 65535))
+ {
+ /* The operand can be relocated. */
+ if (!match_expression (arg, &offset_expr, offset_reloc))
+ return FALSE;
- /* sb, swl, swr */
- return 1;
-}
+ if (offset_reloc[0] != BFD_RELOC_UNUSED)
+ /* Relocation operators were used. Accept the arguent and
+ leave the relocation value in offset_expr and offset_relocs
+ for the caller to process. */
+ return TRUE;
-struct fix_24k_store_info
- {
- /* Immediate offset, if any, for this store instruction. */
- short off;
- /* Alignment required by this store instruction. */
- int align_to;
- /* True for register offsets. */
- int register_offset;
- };
+ if (offset_expr.X_op != O_constant)
+ {
+ /* Accept non-constant operands if no later alternative matches,
+ leaving it for the caller to process. */
+ if (!arg->lax_match)
+ return FALSE;
+ offset_reloc[0] = BFD_RELOC_LO16;
+ return TRUE;
+ }
-/* Comparison function used by qsort. */
+ /* Clear the global state; we're going to install the operand
+ ourselves. */
+ sval = offset_expr.X_add_number;
+ offset_expr.X_op = O_absent;
-static int
-fix_24k_sort (const void *a, const void *b)
-{
- const struct fix_24k_store_info *pos1 = a;
- const struct fix_24k_store_info *pos2 = b;
+ /* For compatibility with older assemblers, we accept
+ 0x8000-0xffff as signed 16-bit numbers when only
+ signed numbers are allowed. */
+ if (sval > max_val)
+ {
+ max_val = ((1 << operand_base->size) - 1) << operand->shift;
+ if (!arg->lax_match && sval <= max_val)
+ return FALSE;
+ }
+ }
+ else
+ {
+ if (!match_const_int (arg, &sval))
+ return FALSE;
+ }
- return (pos1->off - pos2->off);
+ arg->last_op_int = sval;
+
+ if (sval < min_val || sval > max_val || sval % factor)
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
+
+ uval = (unsigned int) sval >> operand->shift;
+ uval -= operand->bias;
+
+ /* Handle -mfix-cn63xxp1. */
+ if (arg->opnum == 1
+ && mips_fix_cn63xxp1
+ && !mips_opts.micromips
+ && strcmp ("pref", arg->insn->insn_mo->name) == 0)
+ switch (uval)
+ {
+ case 5:
+ case 25:
+ case 26:
+ case 27:
+ case 28:
+ case 29:
+ case 30:
+ case 31:
+ /* These are ok. */
+ break;
+
+ default:
+ /* The rest must be changed to 28. */
+ uval = 28;
+ break;
+ }
+
+ insn_insert_operand (arg->insn, operand_base, uval);
+ return TRUE;
}
-/* INSN is a store instruction. Try to record the store information
- in STINFO. Return false if the information isn't known. */
+/* OP_MAPPED_INT matcher. */
static bfd_boolean
-fix_24k_record_store_info (struct fix_24k_store_info *stinfo,
- const struct mips_cl_insn *insn)
+match_mapped_int_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand_base)
{
- /* The instruction must have a known offset. */
- if (!insn->complete_p || !strstr (insn->insn_mo->args, "o("))
+ const struct mips_mapped_int_operand *operand;
+ unsigned int uval, num_vals;
+ offsetT sval;
+
+ operand = (const struct mips_mapped_int_operand *) operand_base;
+ if (!match_const_int (arg, &sval))
return FALSE;
- stinfo->off = (insn->insn_opcode >> OP_SH_IMMEDIATE) & OP_MASK_IMMEDIATE;
- stinfo->align_to = fix_24k_align_to (insn->insn_mo);
+ num_vals = 1 << operand_base->size;
+ for (uval = 0; uval < num_vals; uval++)
+ if (operand->int_map[uval] == sval)
+ break;
+ if (uval == num_vals)
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
+
+ insn_insert_operand (arg->insn, operand_base, uval);
return TRUE;
}
-/* Return the number of nops that would be needed to work around the 24k
- "lost data on stores during refill" errata if instruction INSN
- immediately followed the 2 instructions described by HIST.
- Ignore hazards that are contained within the first IGNORE
- instructions of HIST.
+/* OP_MSB matcher. */
- Problem: The FSB (fetch store buffer) acts as an intermediate buffer
- for the data cache refills and store data. The following describes
- the scenario where the store data could be lost.
+static bfd_boolean
+match_msb_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand_base)
+{
+ const struct mips_msb_operand *operand;
+ int min_val, max_val, max_high;
+ offsetT size, sval, high;
- * A data cache miss, due to either a load or a store, causing fill
- data to be supplied by the memory subsystem
- * The first three doublewords of fill data are returned and written
- into the cache
- * A sequence of four stores occurs in consecutive cycles around the
- final doubleword of the fill:
- * Store A
- * Store B
- * Store C
- * Zero, One or more instructions
- * Store D
+ operand = (const struct mips_msb_operand *) operand_base;
+ min_val = operand->bias;
+ max_val = min_val + (1 << operand_base->size) - 1;
+ max_high = operand->opsize;
- The four stores A-D must be to different doublewords of the line that
- is being filled. The fourth instruction in the sequence above permits
- the fill of the final doubleword to be transferred from the FSB into
- the cache. In the sequence above, the stores may be either integer
- (sb, sh, sw, swr, swl, sc) or coprocessor (swc1/swc2, sdc1/sdc2,
- swxc1, sdxc1, suxc1) stores, as long as the four stores are to
- different doublewords on the line. If the floating point unit is
- running in 1:2 mode, it is not possible to create the sequence above
- using only floating point store instructions.
+ if (!match_const_int (arg, &size))
+ return FALSE;
- In this case, the cache line being filled is incorrectly marked
- invalid, thereby losing the data from any store to the line that
- occurs between the original miss and the completion of the five
- cycle sequence shown above.
+ high = size + arg->last_op_int;
+ sval = operand->add_lsb ? high : size;
- The workarounds are:
+ if (size < 0 || high > max_high || sval < min_val || sval > max_val)
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
+ insn_insert_operand (arg->insn, operand_base, sval - min_val);
+ return TRUE;
+}
- * Run the data cache in write-through mode.
- * Insert a non-store instruction between
- Store A and Store B or Store B and Store C. */
-
-static int
-nops_for_24k (int ignore, const struct mips_cl_insn *hist,
- const struct mips_cl_insn *insn)
+/* OP_REG matcher. */
+
+static bfd_boolean
+match_reg_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand_base)
{
- struct fix_24k_store_info pos[3];
- int align, i, base_offset;
+ const struct mips_reg_operand *operand;
+ unsigned int regno, uval, num_vals;
- if (ignore >= 2)
- return 0;
+ operand = (const struct mips_reg_operand *) operand_base;
+ if (!match_reg (arg, operand->reg_type, ®no))
+ return FALSE;
- /* If the previous instruction wasn't a store, there's nothing to
- worry about. */
- if ((hist[0].insn_mo->pinfo & INSN_STORE_MEMORY) == 0)
- return 0;
+ if (operand->reg_map)
+ {
+ num_vals = 1 << operand->root.size;
+ for (uval = 0; uval < num_vals; uval++)
+ if (operand->reg_map[uval] == regno)
+ break;
+ if (num_vals == uval)
+ return FALSE;
+ }
+ else
+ uval = regno;
- /* If the instructions after the previous one are unknown, we have
- to assume the worst. */
- if (!insn)
- return 1;
+ arg->last_regno = regno;
+ if (arg->opnum == 1)
+ arg->dest_regno = regno;
+ insn_insert_operand (arg->insn, operand_base, uval);
+ return TRUE;
+}
- /* Check whether we are dealing with three consecutive stores. */
- if ((insn->insn_mo->pinfo & INSN_STORE_MEMORY) == 0
- || (hist[1].insn_mo->pinfo & INSN_STORE_MEMORY) == 0)
- return 0;
+/* OP_REG_PAIR matcher. */
- /* If we don't know the relationship between the store addresses,
- assume the worst. */
- if (!BASE_REG_EQ (insn->insn_opcode, hist[0].insn_opcode)
- || !BASE_REG_EQ (insn->insn_opcode, hist[1].insn_opcode))
- return 1;
+static bfd_boolean
+match_reg_pair_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand_base)
+{
+ const struct mips_reg_pair_operand *operand;
+ unsigned int regno1, regno2, uval, num_vals;
- if (!fix_24k_record_store_info (&pos[0], insn)
- || !fix_24k_record_store_info (&pos[1], &hist[0])
- || !fix_24k_record_store_info (&pos[2], &hist[1]))
- return 1;
+ operand = (const struct mips_reg_pair_operand *) operand_base;
+ if (!match_reg (arg, operand->reg_type, ®no1)
+ || !match_char (arg, ',')
+ || !match_reg (arg, operand->reg_type, ®no2))
+ return FALSE;
- qsort (&pos, 3, sizeof (struct fix_24k_store_info), fix_24k_sort);
+ num_vals = 1 << operand_base->size;
+ for (uval = 0; uval < num_vals; uval++)
+ if (operand->reg1_map[uval] == regno1 && operand->reg2_map[uval] == regno2)
+ break;
+ if (uval == num_vals)
+ return FALSE;
- /* Pick a value of ALIGN and X such that all offsets are adjusted by
- X bytes and such that the base register + X is known to be aligned
- to align bytes. */
+ insn_insert_operand (arg->insn, operand_base, uval);
+ return TRUE;
+}
- if (((insn->insn_opcode >> OP_SH_RS) & OP_MASK_RS) == SP)
- align = 8;
- else
- {
- align = pos[0].align_to;
- base_offset = pos[0].off;
- for (i = 1; i < 3; i++)
- if (align < pos[i].align_to)
- {
- align = pos[i].align_to;
- base_offset = pos[i].off;
- }
- for (i = 0; i < 3; i++)
- pos[i].off -= base_offset;
- }
+/* OP_PCREL matcher. The caller chooses the relocation type. */
- pos[0].off &= ~align + 1;
- pos[1].off &= ~align + 1;
- pos[2].off &= ~align + 1;
+static bfd_boolean
+match_pcrel_operand (struct mips_arg_info *arg)
+{
+ bfd_reloc_code_real_type r[3];
- /* If any two stores write to the same chunk, they also write to the
- same doubleword. The offsets are still sorted at this point. */
- if (pos[0].off == pos[1].off || pos[1].off == pos[2].off)
- return 0;
+ return match_expression (arg, &offset_expr, r) && r[0] == BFD_RELOC_UNUSED;
+}
- /* A range of at least 9 bytes is needed for the stores to be in
- non-overlapping doublewords. */
- if (pos[2].off - pos[0].off <= 8)
- return 0;
+/* OP_PERF_REG matcher. */
- if (pos[2].off - pos[1].off >= 24
- || pos[1].off - pos[0].off >= 24
- || pos[2].off - pos[0].off >= 32)
- return 0;
+static bfd_boolean
+match_perf_reg_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
+{
+ offsetT sval;
- return 1;
-}
+ if (!match_const_int (arg, &sval))
+ return FALSE;
-/* Return the number of nops that would be needed if instruction INSN
- immediately followed the MAX_NOPS instructions given by HIST,
- where HIST[0] is the most recent instruction. Ignore hazards
- between INSN and the first IGNORE instructions in HIST.
+ if (sval != 0
+ && (sval != 1
+ || (mips_opts.arch == CPU_R5900
+ && (strcmp (arg->insn->insn_mo->name, "mfps") == 0
+ || strcmp (arg->insn->insn_mo->name, "mtps") == 0))))
+ {
+ set_insn_error (arg->argnum, _("invalid performance register"));
+ return FALSE;
+ }
- If INSN is null, return the worse-case number of nops for any
- instruction. */
+ insn_insert_operand (arg->insn, operand, sval);
+ return TRUE;
+}
-static int
-nops_for_insn (int ignore, const struct mips_cl_insn *hist,
- const struct mips_cl_insn *insn)
+/* OP_ADDIUSP matcher. */
+
+static bfd_boolean
+match_addiusp_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
{
- int i, nops, tmp_nops;
+ offsetT sval;
+ unsigned int uval;
- nops = 0;
- for (i = ignore; i < MAX_DELAY_NOPS; i++)
- {
- tmp_nops = insns_between (hist + i, insn) - i;
- if (tmp_nops > nops)
- nops = tmp_nops;
- }
+ if (!match_const_int (arg, &sval))
+ return FALSE;
- if (mips_fix_vr4130 && !mips_opts.micromips)
+ if (sval % 4)
{
- tmp_nops = nops_for_vr4130 (ignore, hist, insn);
- if (tmp_nops > nops)
- nops = tmp_nops;
+ match_out_of_range (arg);
+ return FALSE;
}
- if (mips_fix_24k && !mips_opts.micromips)
+ sval /= 4;
+ if (!(sval >= -258 && sval <= 257) || (sval >= -2 && sval <= 1))
{
- tmp_nops = nops_for_24k (ignore, hist, insn);
- if (tmp_nops > nops)
- nops = tmp_nops;
+ match_out_of_range (arg);
+ return FALSE;
}
- return nops;
+ uval = (unsigned int) sval;
+ uval = ((uval >> 1) & ~0xff) | (uval & 0xff);
+ insn_insert_operand (arg->insn, operand, uval);
+ return TRUE;
}
-/* The variable arguments provide NUM_INSNS extra instructions that
- might be added to HIST. Return the largest number of nops that
- would be needed after the extended sequence, ignoring hazards
- in the first IGNORE instructions. */
+/* OP_CLO_CLZ_DEST matcher. */
-static int
-nops_for_sequence (int num_insns, int ignore,
- const struct mips_cl_insn *hist, ...)
+static bfd_boolean
+match_clo_clz_dest_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
{
- va_list args;
- struct mips_cl_insn buffer[MAX_NOPS];
- struct mips_cl_insn *cursor;
- int nops;
+ unsigned int regno;
- va_start (args, hist);
- cursor = buffer + num_insns;
- memcpy (cursor, hist, (MAX_NOPS - num_insns) * sizeof (*cursor));
- while (cursor > buffer)
- *--cursor = *va_arg (args, const struct mips_cl_insn *);
+ if (!match_reg (arg, OP_REG_GP, ®no))
+ return FALSE;
- nops = nops_for_insn (ignore, buffer, NULL);
- va_end (args);
- return nops;
+ insn_insert_operand (arg->insn, operand, regno | (regno << 5));
+ return TRUE;
}
-/* Like nops_for_insn, but if INSN is a branch, take into account the
- worst-case delay for the branch target. */
+/* OP_LWM_SWM_LIST matcher. */
-static int
-nops_for_insn_or_target (int ignore, const struct mips_cl_insn *hist,
- const struct mips_cl_insn *insn)
+static bfd_boolean
+match_lwm_swm_list_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
{
- int nops, tmp_nops;
+ unsigned int reglist, sregs, ra, regno1, regno2;
+ struct mips_arg_info reset;
- nops = nops_for_insn (ignore, hist, insn);
- if (delayed_branch_p (insn))
+ reglist = 0;
+ if (!match_reg_range (arg, OP_REG_GP, ®no1, ®no2))
+ return FALSE;
+ do
{
- tmp_nops = nops_for_sequence (2, ignore ? ignore + 2 : 0,
- hist, insn, get_delay_slot_nop (insn));
- if (tmp_nops > nops)
- nops = tmp_nops;
+ if (regno2 == FP && regno1 >= S0 && regno1 <= S7)
+ {
+ reglist |= 1 << FP;
+ regno2 = S7;
+ }
+ reglist |= ((1U << regno2 << 1) - 1) & -(1U << regno1);
+ reset = *arg;
}
- else if (compact_branch_p (insn))
+ while (match_char (arg, ',')
+ && match_reg_range (arg, OP_REG_GP, ®no1, ®no2));
+ *arg = reset;
+
+ if (operand->size == 2)
{
- tmp_nops = nops_for_sequence (1, ignore ? ignore + 1 : 0, hist, insn);
- if (tmp_nops > nops)
- nops = tmp_nops;
+ /* The list must include both ra and s0-sN, for 0 <= N <= 3. E.g.:
+
+ s0, ra
+ s0, s1, ra, s2, s3
+ s0-s2, ra
+
+ and any permutations of these. */
+ if ((reglist & 0xfff1ffff) != 0x80010000)
+ return FALSE;
+
+ sregs = (reglist >> 17) & 7;
+ ra = 0;
}
- return nops;
-}
+ else
+ {
+ /* The list must include at least one of ra and s0-sN,
+ for 0 <= N <= 8. (Note that there is a gap between s7 and s8,
+ which are $23 and $30 respectively.) E.g.:
+
+ ra
+ s0
+ ra, s0, s1, s2
+ s0-s8
+ s0-s5, ra
+
+ and any permutations of these. */
+ if ((reglist & 0x3f00ffff) != 0)
+ return FALSE;
-/* Fix NOP issue: Replace nops by "or at,at,zero". */
+ ra = (reglist >> 27) & 0x10;
+ sregs = ((reglist >> 22) & 0x100) | ((reglist >> 16) & 0xff);
+ }
+ sregs += 1;
+ if ((sregs & -sregs) != sregs)
+ return FALSE;
-static void
-fix_loongson2f_nop (struct mips_cl_insn * ip)
-{
- gas_assert (!HAVE_CODE_COMPRESSION);
- if (strcmp (ip->insn_mo->name, "nop") == 0)
- ip->insn_opcode = LOONGSON2F_NOP_INSN;
+ insn_insert_operand (arg->insn, operand, (ffs (sregs) - 1) | ra);
+ return TRUE;
}
-/* Fix Jump Issue: Eliminate instruction fetch from outside 256M region
- jr target pc &= 'hffff_ffff_cfff_ffff. */
+/* OP_ENTRY_EXIT_LIST matcher. */
-static void
-fix_loongson2f_jump (struct mips_cl_insn * ip)
+static unsigned int
+match_entry_exit_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
{
- gas_assert (!HAVE_CODE_COMPRESSION);
- if (strcmp (ip->insn_mo->name, "j") == 0
- || strcmp (ip->insn_mo->name, "jr") == 0
- || strcmp (ip->insn_mo->name, "jalr") == 0)
- {
- int sreg;
- expressionS ep;
+ unsigned int mask;
+ bfd_boolean is_exit;
- if (! mips_opts.at)
- return;
+ /* The format is the same for both ENTRY and EXIT, but the constraints
+ are different. */
+ is_exit = strcmp (arg->insn->insn_mo->name, "exit") == 0;
+ mask = (is_exit ? 7 << 3 : 0);
+ do
+ {
+ unsigned int regno1, regno2;
+ bfd_boolean is_freg;
- sreg = EXTRACT_OPERAND (0, RS, *ip);
- if (sreg == ZERO || sreg == KT0 || sreg == KT1 || sreg == ATREG)
- return;
+ if (match_reg_range (arg, OP_REG_GP, ®no1, ®no2))
+ is_freg = FALSE;
+ else if (match_reg_range (arg, OP_REG_FP, ®no1, ®no2))
+ is_freg = TRUE;
+ else
+ return FALSE;
- ep.X_op = O_constant;
- ep.X_add_number = 0xcfff0000;
- macro_build (&ep, "lui", "t,u", ATREG, BFD_RELOC_HI16);
- ep.X_add_number = 0xffff;
- macro_build (&ep, "ori", "t,r,i", ATREG, ATREG, BFD_RELOC_LO16);
- macro_build (NULL, "and", "d,v,t", sreg, sreg, ATREG);
+ if (is_exit && is_freg && regno1 == 0 && regno2 < 2)
+ {
+ mask &= ~(7 << 3);
+ mask |= (5 + regno2) << 3;
+ }
+ else if (!is_exit && regno1 == 4 && regno2 >= 4 && regno2 <= 7)
+ mask |= (regno2 - 3) << 3;
+ else if (regno1 == 16 && regno2 >= 16 && regno2 <= 17)
+ mask |= (regno2 - 15) << 1;
+ else if (regno1 == RA && regno2 == RA)
+ mask |= 1;
+ else
+ return FALSE;
}
-}
+ while (match_char (arg, ','));
-static void
-fix_loongson2f (struct mips_cl_insn * ip)
-{
- if (mips_fix_loongson2f_nop)
- fix_loongson2f_nop (ip);
-
- if (mips_fix_loongson2f_jump)
- fix_loongson2f_jump (ip);
+ insn_insert_operand (arg->insn, operand, mask);
+ return TRUE;
}
-/* IP is a branch that has a delay slot, and we need to fill it
- automatically. Return true if we can do that by swapping IP
- with the previous instruction.
- ADDRESS_EXPR is an operand of the instruction to be used with
- RELOC_TYPE. */
+/* OP_SAVE_RESTORE_LIST matcher. */
static bfd_boolean
-can_swap_branch_p (struct mips_cl_insn *ip, expressionS *address_expr,
- bfd_reloc_code_real_type *reloc_type)
+match_save_restore_list_operand (struct mips_arg_info *arg)
{
- unsigned long pinfo, pinfo2, prev_pinfo, prev_pinfo2;
- unsigned int gpr_read, gpr_write, prev_gpr_read, prev_gpr_write;
+ unsigned int opcode, args, statics, sregs;
+ unsigned int num_frame_sizes, num_args, num_statics, num_sregs;
+ offsetT frame_size;
+
+ opcode = arg->insn->insn_opcode;
+ frame_size = 0;
+ num_frame_sizes = 0;
+ args = 0;
+ statics = 0;
+ sregs = 0;
+ do
+ {
+ unsigned int regno1, regno2;
- /* -O2 and above is required for this optimization. */
- if (mips_optimize < 2)
- return FALSE;
+ if (arg->token->type == OT_INTEGER)
+ {
+ /* Handle the frame size. */
+ if (!match_const_int (arg, &frame_size))
+ return FALSE;
+ num_frame_sizes += 1;
+ }
+ else
+ {
+ if (!match_reg_range (arg, OP_REG_GP, ®no1, ®no2))
+ return FALSE;
- /* If we have seen .set volatile or .set nomove, don't optimize. */
- if (mips_opts.nomove)
- return FALSE;
+ while (regno1 <= regno2)
+ {
+ if (regno1 >= 4 && regno1 <= 7)
+ {
+ if (num_frame_sizes == 0)
+ /* args $a0-$a3 */
+ args |= 1 << (regno1 - 4);
+ else
+ /* statics $a0-$a3 */
+ statics |= 1 << (regno1 - 4);
+ }
+ else if (regno1 >= 16 && regno1 <= 23)
+ /* $s0-$s7 */
+ sregs |= 1 << (regno1 - 16);
+ else if (regno1 == 30)
+ /* $s8 */
+ sregs |= 1 << 8;
+ else if (regno1 == 31)
+ /* Add $ra to insn. */
+ opcode |= 0x40;
+ else
+ return FALSE;
+ regno1 += 1;
+ if (regno1 == 24)
+ regno1 = 30;
+ }
+ }
+ }
+ while (match_char (arg, ','));
- /* We can't swap if the previous instruction's position is fixed. */
- if (history[0].fixed_p)
+ /* Encode args/statics combination. */
+ if (args & statics)
return FALSE;
+ else if (args == 0xf)
+ /* All $a0-$a3 are args. */
+ opcode |= MIPS16_ALL_ARGS << 16;
+ else if (statics == 0xf)
+ /* All $a0-$a3 are statics. */
+ opcode |= MIPS16_ALL_STATICS << 16;
+ else
+ {
+ /* Count arg registers. */
+ num_args = 0;
+ while (args & 0x1)
+ {
+ args >>= 1;
+ num_args += 1;
+ }
+ if (args != 0)
+ return FALSE;
- /* If the previous previous insn was in a .set noreorder, we can't
- swap. Actually, the MIPS assembler will swap in this situation.
- However, gcc configured -with-gnu-as will generate code like
+ /* Count static registers. */
+ num_statics = 0;
+ while (statics & 0x8)
+ {
+ statics = (statics << 1) & 0xf;
+ num_statics += 1;
+ }
+ if (statics != 0)
+ return FALSE;
- .set noreorder
- lw $4,XXX
- .set reorder
- INSN
- bne $4,$0,foo
+ /* Encode args/statics. */
+ opcode |= ((num_args << 2) | num_statics) << 16;
+ }
- in which we can not swap the bne and INSN. If gcc is not configured
- -with-gnu-as, it does not output the .set pseudo-ops. */
- if (history[1].noreorder_p)
- return FALSE;
+ /* Encode $s0/$s1. */
+ if (sregs & (1 << 0)) /* $s0 */
+ opcode |= 0x20;
+ if (sregs & (1 << 1)) /* $s1 */
+ opcode |= 0x10;
+ sregs >>= 2;
- /* If the previous instruction had a fixup in mips16 mode, we can not swap.
- This means that the previous instruction was a 4-byte one anyhow. */
- if (mips_opts.mips16 && history[0].fixp[0])
+ /* Encode $s2-$s8. */
+ num_sregs = 0;
+ while (sregs & 1)
+ {
+ sregs >>= 1;
+ num_sregs += 1;
+ }
+ if (sregs != 0)
return FALSE;
+ opcode |= num_sregs << 24;
- /* If the branch is itself the target of a branch, we can not swap.
- We cheat on this; all we check for is whether there is a label on
- this instruction. If there are any branches to anything other than
- a label, users must use .set noreorder. */
- if (seg_info (now_seg)->label_list)
- return FALSE;
+ /* Encode frame size. */
+ if (num_frame_sizes == 0)
+ {
+ set_insn_error (arg->argnum, _("missing frame size"));
+ return FALSE;
+ }
+ if (num_frame_sizes > 1)
+ {
+ set_insn_error (arg->argnum, _("frame size specified twice"));
+ return FALSE;
+ }
+ if ((frame_size & 7) != 0 || frame_size < 0 || frame_size > 0xff * 8)
+ {
+ set_insn_error (arg->argnum, _("invalid frame size"));
+ return FALSE;
+ }
+ if (frame_size != 128 || (opcode >> 16) != 0)
+ {
+ frame_size /= 8;
+ opcode |= (((frame_size & 0xf0) << 16)
+ | (frame_size & 0x0f));
+ }
- /* If the previous instruction is in a variant frag other than this
- branch's one, we cannot do the swap. This does not apply to
- MIPS16 code, which uses variant frags for different purposes. */
- if (!mips_opts.mips16
- && history[0].frag
- && history[0].frag->fr_type == rs_machine_dependent)
- return FALSE;
+ /* Finally build the instruction. */
+ if ((opcode >> 16) != 0 || frame_size == 0)
+ opcode |= MIPS16_EXTEND;
+ arg->insn->insn_opcode = opcode;
+ return TRUE;
+}
- /* We do not swap with instructions that cannot architecturally
- be placed in a branch delay slot, such as SYNC or ERET. We
- also refrain from swapping with a trap instruction, since it
- complicates trap handlers to have the trap instruction be in
- a delay slot. */
- prev_pinfo = history[0].insn_mo->pinfo;
- if (prev_pinfo & INSN_NO_DELAY_SLOT)
- return FALSE;
+/* OP_MDMX_IMM_REG matcher. */
- /* Check for conflicts between the branch and the instructions
- before the candidate delay slot. */
- if (nops_for_insn (0, history + 1, ip) > 0)
- return FALSE;
+static bfd_boolean
+match_mdmx_imm_reg_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
+{
+ unsigned int regno, uval;
+ bfd_boolean is_qh;
+ const struct mips_opcode *opcode;
- /* Check for conflicts between the swapped sequence and the
- target of the branch. */
- if (nops_for_sequence (2, 0, history + 1, ip, history) > 0)
- return FALSE;
+ /* The mips_opcode records whether this is an octobyte or quadhalf
+ instruction. Start out with that bit in place. */
+ opcode = arg->insn->insn_mo;
+ uval = mips_extract_operand (operand, opcode->match);
+ is_qh = (uval != 0);
- /* If the branch reads a register that the previous
- instruction sets, we can not swap. */
- gpr_read = gpr_read_mask (ip);
- prev_gpr_write = gpr_write_mask (&history[0]);
- if (gpr_read & prev_gpr_write)
- return FALSE;
+ if (arg->token->type == OT_REG)
+ {
+ if ((opcode->membership & INSN_5400)
+ && strcmp (opcode->name, "rzu.ob") == 0)
+ {
+ set_insn_error_i (arg->argnum, _("operand %d must be an immediate"),
+ arg->argnum);
+ return FALSE;
+ }
- /* If the branch writes a register that the previous
- instruction sets, we can not swap. */
- gpr_write = gpr_write_mask (ip);
- if (gpr_write & prev_gpr_write)
- return FALSE;
+ if (!match_regno (arg, OP_REG_VEC, arg->token->u.regno, ®no))
+ return FALSE;
+ ++arg->token;
- /* If the branch writes a register that the previous
- instruction reads, we can not swap. */
- prev_gpr_read = gpr_read_mask (&history[0]);
- if (gpr_write & prev_gpr_read)
- return FALSE;
+ /* Check whether this is a vector register or a broadcast of
+ a single element. */
+ if (arg->token->type == OT_INTEGER_INDEX)
+ {
+ if (arg->token->u.index > (is_qh ? 3 : 7))
+ {
+ set_insn_error (arg->argnum, _("invalid element selector"));
+ return FALSE;
+ }
+ uval |= arg->token->u.index << (is_qh ? 2 : 1) << 5;
+ ++arg->token;
+ }
+ else
+ {
+ /* A full vector. */
+ if ((opcode->membership & INSN_5400)
+ && (strcmp (opcode->name, "sll.ob") == 0
+ || strcmp (opcode->name, "srl.ob") == 0))
+ {
+ set_insn_error_i (arg->argnum, _("operand %d must be scalar"),
+ arg->argnum);
+ return FALSE;
+ }
- /* If one instruction sets a condition code and the
- other one uses a condition code, we can not swap. */
- pinfo = ip->insn_mo->pinfo;
- if ((pinfo & INSN_READ_COND_CODE)
- && (prev_pinfo & INSN_WRITE_COND_CODE))
- return FALSE;
- if ((pinfo & INSN_WRITE_COND_CODE)
- && (prev_pinfo & INSN_READ_COND_CODE))
- return FALSE;
+ if (is_qh)
+ uval |= MDMX_FMTSEL_VEC_QH << 5;
+ else
+ uval |= MDMX_FMTSEL_VEC_OB << 5;
+ }
+ uval |= regno;
+ }
+ else
+ {
+ offsetT sval;
- /* If the previous instruction uses the PC, we can not swap. */
- prev_pinfo2 = history[0].insn_mo->pinfo2;
- if (mips_opts.mips16 && (prev_pinfo & MIPS16_INSN_READ_PC))
- return FALSE;
- if (mips_opts.micromips && (prev_pinfo2 & INSN2_READ_PC))
- return FALSE;
+ if (!match_const_int (arg, &sval))
+ return FALSE;
+ if (sval < 0 || sval > 31)
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
+ uval |= (sval & 31);
+ if (is_qh)
+ uval |= MDMX_FMTSEL_IMM_QH << 5;
+ else
+ uval |= MDMX_FMTSEL_IMM_OB << 5;
+ }
+ insn_insert_operand (arg->insn, operand, uval);
+ return TRUE;
+}
- /* If the previous instruction has an incorrect size for a fixed
- branch delay slot in microMIPS mode, we cannot swap. */
- pinfo2 = ip->insn_mo->pinfo2;
- if (mips_opts.micromips
- && (pinfo2 & INSN2_BRANCH_DELAY_16BIT)
- && insn_length (history) != 2)
- return FALSE;
- if (mips_opts.micromips
- && (pinfo2 & INSN2_BRANCH_DELAY_32BIT)
- && insn_length (history) != 4)
+/* OP_IMM_INDEX matcher. */
+
+static bfd_boolean
+match_imm_index_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
+{
+ unsigned int max_val;
+
+ if (arg->token->type != OT_INTEGER_INDEX)
return FALSE;
- /* On R5900 short loops need to be fixed by inserting a nop in
- the branch delay slots.
- A short loop can be terminated too early. */
- if (mips_opts.arch == CPU_R5900
- /* Check if instruction has a parameter, ignore "j $31". */
- && (address_expr != NULL)
- /* Parameter must be 16 bit. */
- && (*reloc_type == BFD_RELOC_16_PCREL_S2)
- /* Branch to same segment. */
- && (S_GET_SEGMENT(address_expr->X_add_symbol) == now_seg)
- /* Branch to same code fragment. */
- && (symbol_get_frag(address_expr->X_add_symbol) == frag_now)
- /* Can only calculate branch offset if value is known. */
- && symbol_constant_p(address_expr->X_add_symbol)
- /* Check if branch is really conditional. */
- && !((ip->insn_opcode & 0xffff0000) == 0x10000000 /* beq $0,$0 */
- || (ip->insn_opcode & 0xffff0000) == 0x04010000 /* bgez $0 */
- || (ip->insn_opcode & 0xffff0000) == 0x04110000)) /* bgezal $0 */
+ max_val = (1 << operand->size) - 1;
+ if (arg->token->u.index > max_val)
{
- int distance;
- /* Check if loop is shorter than 6 instructions including
- branch and delay slot. */
- distance = frag_now_fix() - S_GET_VALUE(address_expr->X_add_symbol);
- if (distance <= 20)
- {
- int i;
- int rv;
-
- rv = FALSE;
- /* When the loop includes branches or jumps,
- it is not a short loop. */
- for (i = 0; i < (distance / 4); i++)
- {
- if ((history[i].cleared_p)
- || delayed_branch_p(&history[i]))
- {
- rv = TRUE;
- break;
- }
- }
- if (rv == FALSE)
- {
- /* Insert nop after branch to fix short loop. */
- return FALSE;
- }
- }
+ match_out_of_range (arg);
+ return FALSE;
}
-
+ insn_insert_operand (arg->insn, operand, arg->token->u.index);
+ ++arg->token;
return TRUE;
}
-/* Decide how we should add IP to the instruction stream.
- ADDRESS_EXPR is an operand of the instruction to be used with
- RELOC_TYPE. */
+/* OP_REG_INDEX matcher. */
-static enum append_method
-get_append_method (struct mips_cl_insn *ip, expressionS *address_expr,
- bfd_reloc_code_real_type *reloc_type)
+static bfd_boolean
+match_reg_index_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
{
- unsigned long pinfo;
+ unsigned int regno;
- /* The relaxed version of a macro sequence must be inherently
- hazard-free. */
- if (mips_relax.sequence == 2)
- return APPEND_ADD;
+ if (arg->token->type != OT_REG_INDEX)
+ return FALSE;
- /* We must not dabble with instructions in a ".set norerorder" block. */
- if (mips_opts.noreorder)
- return APPEND_ADD;
+ if (!match_regno (arg, OP_REG_GP, arg->token->u.regno, ®no))
+ return FALSE;
- /* Otherwise, it's our responsibility to fill branch delay slots. */
- if (delayed_branch_p (ip))
- {
- if (!branch_likely_p (ip)
- && can_swap_branch_p (ip, address_expr, reloc_type))
- return APPEND_SWAP;
+ insn_insert_operand (arg->insn, operand, regno);
+ ++arg->token;
+ return TRUE;
+}
- pinfo = ip->insn_mo->pinfo;
- if (mips_opts.mips16
- && ISA_SUPPORTS_MIPS16E
- && (pinfo & (MIPS16_INSN_READ_X | MIPS16_INSN_READ_31)))
- return APPEND_ADD_COMPACT;
+/* OP_PC matcher. */
- return APPEND_ADD_WITH_NOP;
+static bfd_boolean
+match_pc_operand (struct mips_arg_info *arg)
+{
+ if (arg->token->type == OT_REG && (arg->token->u.regno & RTYPE_PC))
+ {
+ ++arg->token;
+ return TRUE;
}
-
- return APPEND_ADD;
+ return FALSE;
}
-/* IP is a MIPS16 instruction whose opcode we have just changed.
- Point IP->insn_mo to the new opcode's definition. */
+/* OP_REPEAT_DEST_REG and OP_REPEAT_PREV_REG matcher. OTHER_REGNO is the
+ register that we need to match. */
-static void
-find_altered_mips16_opcode (struct mips_cl_insn *ip)
+static bfd_boolean
+match_tied_reg_operand (struct mips_arg_info *arg, unsigned int other_regno)
{
- const struct mips_opcode *mo, *end;
+ unsigned int regno;
- end = &mips16_opcodes[bfd_mips16_num_opcodes];
- for (mo = ip->insn_mo; mo < end; mo++)
- if ((ip->insn_opcode & mo->mask) == mo->match)
- {
- ip->insn_mo = mo;
- return;
- }
- abort ();
+ return match_reg (arg, OP_REG_GP, ®no) && regno == other_regno;
}
-/* For microMIPS macros, we need to generate a local number label
- as the target of branches. */
-#define MICROMIPS_LABEL_CHAR '\037'
-static unsigned long micromips_target_label;
-static char micromips_target_name[32];
-
-static char *
-micromips_label_name (void)
-{
- char *p = micromips_target_name;
- char symbol_name_temporary[24];
- unsigned long l;
- int i;
+/* Read a floating-point constant from S for LI.S or LI.D. LENGTH is
+ the length of the value in bytes (4 for float, 8 for double) and
+ USING_GPRS says whether the destination is a GPR rather than an FPR.
- if (*p)
- return p;
+ Return the constant in IMM and OFFSET as follows:
- i = 0;
- l = micromips_target_label;
-#ifdef LOCAL_LABEL_PREFIX
- *p++ = LOCAL_LABEL_PREFIX;
-#endif
- *p++ = 'L';
- *p++ = MICROMIPS_LABEL_CHAR;
- do
- {
- symbol_name_temporary[i++] = l % 10 + '0';
- l /= 10;
- }
- while (l != 0);
- while (i > 0)
- *p++ = symbol_name_temporary[--i];
- *p = '\0';
+ - If the constant should be loaded via memory, set IMM to O_absent and
+ OFFSET to the memory address.
- return micromips_target_name;
-}
+ - Otherwise, if the constant should be loaded into two 32-bit registers,
+ set IMM to the O_constant to load into the high register and OFFSET
+ to the corresponding value for the low register.
-static void
-micromips_label_expr (expressionS *label_expr)
-{
- label_expr->X_op = O_symbol;
- label_expr->X_add_symbol = symbol_find_or_make (micromips_label_name ());
- label_expr->X_add_number = 0;
-}
+ - Otherwise, set IMM to the full O_constant and set OFFSET to O_absent.
-static void
-micromips_label_inc (void)
-{
- micromips_target_label++;
- *micromips_target_name = '\0';
-}
+ These constants only appear as the last operand in an instruction,
+ and every instruction that accepts them in any variant accepts them
+ in all variants. This means we don't have to worry about backing out
+ any changes if the instruction does not match. We just match
+ unconditionally and report an error if the constant is invalid. */
-static void
-micromips_add_label (void)
+static bfd_boolean
+match_float_constant (struct mips_arg_info *arg, expressionS *imm,
+ expressionS *offset, int length, bfd_boolean using_gprs)
{
- symbolS *s;
+ char *p;
+ segT seg, new_seg;
+ subsegT subseg;
+ const char *newname;
+ unsigned char *data;
+
+ /* Where the constant is placed is based on how the MIPS assembler
+ does things:
+
+ length == 4 && using_gprs -- immediate value only
+ length == 8 && using_gprs -- .rdata or immediate value
+ length == 4 && !using_gprs -- .lit4 or immediate value
+ length == 8 && !using_gprs -- .lit8 or immediate value
+
+ The .lit4 and .lit8 sections are only used if permitted by the
+ -G argument. */
+ if (arg->token->type != OT_FLOAT)
+ {
+ set_insn_error (arg->argnum, _("floating-point expression required"));
+ return FALSE;
+ }
- s = colon (micromips_label_name ());
- micromips_label_inc ();
- S_SET_OTHER (s, ELF_ST_SET_MICROMIPS (S_GET_OTHER (s)));
-}
+ gas_assert (arg->token->u.flt.length == length);
+ data = arg->token->u.flt.data;
+ ++arg->token;
-/* If assembling microMIPS code, then return the microMIPS reloc
- corresponding to the requested one if any. Otherwise return
- the reloc unchanged. */
+ /* Handle 32-bit constants for which an immediate value is best. */
+ if (length == 4
+ && (using_gprs
+ || g_switch_value < 4
+ || (data[0] == 0 && data[1] == 0)
+ || (data[2] == 0 && data[3] == 0)))
+ {
+ imm->X_op = O_constant;
+ if (!target_big_endian)
+ imm->X_add_number = bfd_getl32 (data);
+ else
+ imm->X_add_number = bfd_getb32 (data);
+ offset->X_op = O_absent;
+ return TRUE;
+ }
-static bfd_reloc_code_real_type
-micromips_map_reloc (bfd_reloc_code_real_type reloc)
-{
- static const bfd_reloc_code_real_type relocs[][2] =
+ /* Handle 64-bit constants for which an immediate value is best. */
+ if (length == 8
+ && !mips_disable_float_construction
+ /* Constants can only be constructed in GPRs and copied
+ to FPRs if the GPRs are at least as wide as the FPRs.
+ Force the constant into memory if we are using 64-bit FPRs
+ but the GPRs are only 32 bits wide. */
+ /* ??? No longer true with the addition of MTHC1, but this
+ is legacy code... */
+ && (using_gprs || !(HAVE_64BIT_FPRS && HAVE_32BIT_GPRS))
+ && ((data[0] == 0 && data[1] == 0)
+ || (data[2] == 0 && data[3] == 0))
+ && ((data[4] == 0 && data[5] == 0)
+ || (data[6] == 0 && data[7] == 0)))
{
- /* Keep sorted incrementally by the left-hand key. */
- { BFD_RELOC_16_PCREL_S2, BFD_RELOC_MICROMIPS_16_PCREL_S1 },
- { BFD_RELOC_GPREL16, BFD_RELOC_MICROMIPS_GPREL16 },
- { BFD_RELOC_MIPS_JMP, BFD_RELOC_MICROMIPS_JMP },
- { BFD_RELOC_HI16, BFD_RELOC_MICROMIPS_HI16 },
- { BFD_RELOC_HI16_S, BFD_RELOC_MICROMIPS_HI16_S },
- { BFD_RELOC_LO16, BFD_RELOC_MICROMIPS_LO16 },
- { BFD_RELOC_MIPS_LITERAL, BFD_RELOC_MICROMIPS_LITERAL },
- { BFD_RELOC_MIPS_GOT16, BFD_RELOC_MICROMIPS_GOT16 },
- { BFD_RELOC_MIPS_CALL16, BFD_RELOC_MICROMIPS_CALL16 },
- { BFD_RELOC_MIPS_GOT_HI16, BFD_RELOC_MICROMIPS_GOT_HI16 },
- { BFD_RELOC_MIPS_GOT_LO16, BFD_RELOC_MICROMIPS_GOT_LO16 },
- { BFD_RELOC_MIPS_CALL_HI16, BFD_RELOC_MICROMIPS_CALL_HI16 },
- { BFD_RELOC_MIPS_CALL_LO16, BFD_RELOC_MICROMIPS_CALL_LO16 },
- { BFD_RELOC_MIPS_SUB, BFD_RELOC_MICROMIPS_SUB },
- { BFD_RELOC_MIPS_GOT_PAGE, BFD_RELOC_MICROMIPS_GOT_PAGE },
- { BFD_RELOC_MIPS_GOT_OFST, BFD_RELOC_MICROMIPS_GOT_OFST },
- { BFD_RELOC_MIPS_GOT_DISP, BFD_RELOC_MICROMIPS_GOT_DISP },
- { BFD_RELOC_MIPS_HIGHEST, BFD_RELOC_MICROMIPS_HIGHEST },
- { BFD_RELOC_MIPS_HIGHER, BFD_RELOC_MICROMIPS_HIGHER },
- { BFD_RELOC_MIPS_SCN_DISP, BFD_RELOC_MICROMIPS_SCN_DISP },
- { BFD_RELOC_MIPS_TLS_GD, BFD_RELOC_MICROMIPS_TLS_GD },
- { BFD_RELOC_MIPS_TLS_LDM, BFD_RELOC_MICROMIPS_TLS_LDM },
- { BFD_RELOC_MIPS_TLS_DTPREL_HI16, BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16 },
- { BFD_RELOC_MIPS_TLS_DTPREL_LO16, BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16 },
- { BFD_RELOC_MIPS_TLS_GOTTPREL, BFD_RELOC_MICROMIPS_TLS_GOTTPREL },
- { BFD_RELOC_MIPS_TLS_TPREL_HI16, BFD_RELOC_MICROMIPS_TLS_TPREL_HI16 },
- { BFD_RELOC_MIPS_TLS_TPREL_LO16, BFD_RELOC_MICROMIPS_TLS_TPREL_LO16 }
- };
- bfd_reloc_code_real_type r;
- size_t i;
+ /* The value is simple enough to load with a couple of instructions.
+ If using 32-bit registers, set IMM to the high order 32 bits and
+ OFFSET to the low order 32 bits. Otherwise, set IMM to the entire
+ 64 bit constant. */
+ if (using_gprs ? HAVE_32BIT_GPRS : HAVE_32BIT_FPRS)
+ {
+ imm->X_op = O_constant;
+ offset->X_op = O_constant;
+ if (!target_big_endian)
+ {
+ imm->X_add_number = bfd_getl32 (data + 4);
+ offset->X_add_number = bfd_getl32 (data);
+ }
+ else
+ {
+ imm->X_add_number = bfd_getb32 (data);
+ offset->X_add_number = bfd_getb32 (data + 4);
+ }
+ if (offset->X_add_number == 0)
+ offset->X_op = O_absent;
+ }
+ else
+ {
+ imm->X_op = O_constant;
+ if (!target_big_endian)
+ imm->X_add_number = bfd_getl64 (data);
+ else
+ imm->X_add_number = bfd_getb64 (data);
+ offset->X_op = O_absent;
+ }
+ return TRUE;
+ }
- if (!mips_opts.micromips)
- return reloc;
- for (i = 0; i < ARRAY_SIZE (relocs); i++)
+ /* Switch to the right section. */
+ seg = now_seg;
+ subseg = now_subseg;
+ if (length == 4)
{
- r = relocs[i][0];
- if (r > reloc)
- return reloc;
- if (r == reloc)
- return relocs[i][1];
+ gas_assert (!using_gprs && g_switch_value >= 4);
+ newname = ".lit4";
}
- return reloc;
+ else
+ {
+ if (using_gprs || g_switch_value < 8)
+ newname = RDATA_SECTION_NAME;
+ else
+ newname = ".lit8";
+ }
+
+ new_seg = subseg_new (newname, (subsegT) 0);
+ bfd_set_section_flags (stdoutput, new_seg,
+ SEC_ALLOC | SEC_LOAD | SEC_READONLY | SEC_DATA);
+ frag_align (length == 4 ? 2 : 3, 0, 0);
+ if (strncmp (TARGET_OS, "elf", 3) != 0)
+ record_alignment (new_seg, 4);
+ else
+ record_alignment (new_seg, length == 4 ? 2 : 3);
+ if (seg == now_seg)
+ as_bad (_("cannot use `%s' in this section"), arg->insn->insn_mo->name);
+
+ /* Set the argument to the current address in the section. */
+ imm->X_op = O_absent;
+ offset->X_op = O_symbol;
+ offset->X_add_symbol = symbol_temp_new_now ();
+ offset->X_add_number = 0;
+
+ /* Put the floating point number into the section. */
+ p = frag_more (length);
+ memcpy (p, data, length);
+
+ /* Switch back to the original section. */
+ subseg_set (seg, subseg);
+ return TRUE;
}
-/* Try to resolve relocation RELOC against constant OPERAND at assembly time.
- Return true on success, storing the resolved value in RESULT. */
+/* OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX matcher; MATCH_P selects between
+ them. */
static bfd_boolean
-calculate_reloc (bfd_reloc_code_real_type reloc, offsetT operand,
- offsetT *result)
+match_vu0_suffix_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand,
+ bfd_boolean match_p)
{
- switch (reloc)
- {
- case BFD_RELOC_MIPS_HIGHEST:
- case BFD_RELOC_MICROMIPS_HIGHEST:
- *result = ((operand + 0x800080008000ull) >> 48) & 0xffff;
- return TRUE;
-
- case BFD_RELOC_MIPS_HIGHER:
- case BFD_RELOC_MICROMIPS_HIGHER:
- *result = ((operand + 0x80008000ull) >> 32) & 0xffff;
- return TRUE;
+ unsigned int uval;
- case BFD_RELOC_HI16_S:
- case BFD_RELOC_MICROMIPS_HI16_S:
- case BFD_RELOC_MIPS16_HI16_S:
- *result = ((operand + 0x8000) >> 16) & 0xffff;
- return TRUE;
+ /* The operand can be an XYZW mask or a single 2-bit channel index
+ (with X being 0). */
+ gas_assert (operand->size == 2 || operand->size == 4);
- case BFD_RELOC_HI16:
- case BFD_RELOC_MICROMIPS_HI16:
- case BFD_RELOC_MIPS16_HI16:
- *result = (operand >> 16) & 0xffff;
- return TRUE;
+ /* The suffix can be omitted when it is already part of the opcode. */
+ if (arg->token->type != OT_CHANNELS)
+ return match_p;
- case BFD_RELOC_LO16:
- case BFD_RELOC_MICROMIPS_LO16:
- case BFD_RELOC_MIPS16_LO16:
- *result = operand & 0xffff;
- return TRUE;
+ uval = arg->token->u.channels;
+ if (operand->size == 2)
+ {
+ /* Check that a single bit is set and convert it into a 2-bit index. */
+ if ((uval & -uval) != uval)
+ return FALSE;
+ uval = 4 - ffs (uval);
+ }
- case BFD_RELOC_UNUSED:
- *result = operand;
- return TRUE;
+ if (match_p && insn_extract_operand (arg->insn, operand) != uval)
+ return FALSE;
- default:
- return FALSE;
- }
+ ++arg->token;
+ if (!match_p)
+ insn_insert_operand (arg->insn, operand, uval);
+ return TRUE;
}
-/* Output an instruction. IP is the instruction information.
- ADDRESS_EXPR is an operand of the instruction to be used with
- RELOC_TYPE. EXPANSIONP is true if the instruction is part of
- a macro expansion. */
+/* S is the text seen for ARG. Match it against OPERAND. Return the end
+ of the argument text if the match is successful, otherwise return null. */
-static void
-append_insn (struct mips_cl_insn *ip, expressionS *address_expr,
- bfd_reloc_code_real_type *reloc_type, bfd_boolean expansionp)
+static bfd_boolean
+match_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
{
- unsigned long prev_pinfo2, pinfo;
- bfd_boolean relaxed_branch = FALSE;
- enum append_method method;
- bfd_boolean relax32;
- int branch_disp;
+ switch (operand->type)
+ {
+ case OP_INT:
+ return match_int_operand (arg, operand);
- if (mips_fix_loongson2f && !HAVE_CODE_COMPRESSION)
- fix_loongson2f (ip);
+ case OP_MAPPED_INT:
+ return match_mapped_int_operand (arg, operand);
- file_ase_mips16 |= mips_opts.mips16;
- file_ase_micromips |= mips_opts.micromips;
+ case OP_MSB:
+ return match_msb_operand (arg, operand);
- prev_pinfo2 = history[0].insn_mo->pinfo2;
- pinfo = ip->insn_mo->pinfo;
+ case OP_REG:
+ case OP_OPTIONAL_REG:
+ return match_reg_operand (arg, operand);
- if (mips_opts.micromips
- && !expansionp
- && (((prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0
- && micromips_insn_length (ip->insn_mo) != 2)
- || ((prev_pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
- && micromips_insn_length (ip->insn_mo) != 4)))
- as_warn (_("Wrong size instruction in a %u-bit branch delay slot"),
- (prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 ? 16 : 32);
+ case OP_REG_PAIR:
+ return match_reg_pair_operand (arg, operand);
- if (address_expr == NULL)
- ip->complete_p = 1;
- else if (reloc_type[0] <= BFD_RELOC_UNUSED
- && reloc_type[1] == BFD_RELOC_UNUSED
- && reloc_type[2] == BFD_RELOC_UNUSED
- && address_expr->X_op == O_constant)
- {
- switch (*reloc_type)
- {
- case BFD_RELOC_MIPS_JMP:
- {
- int shift;
+ case OP_PCREL:
+ return match_pcrel_operand (arg);
- shift = mips_opts.micromips ? 1 : 2;
- if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
- as_bad (_("jump to misaligned address (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- ip->insn_opcode |= ((address_expr->X_add_number >> shift)
- & 0x3ffffff);
- ip->complete_p = 1;
- }
- break;
+ case OP_PERF_REG:
+ return match_perf_reg_operand (arg, operand);
- case BFD_RELOC_MIPS16_JMP:
- if ((address_expr->X_add_number & 3) != 0)
- as_bad (_("jump to misaligned address (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- ip->insn_opcode |=
- (((address_expr->X_add_number & 0x7c0000) << 3)
- | ((address_expr->X_add_number & 0xf800000) >> 7)
- | ((address_expr->X_add_number & 0x3fffc) >> 2));
- ip->complete_p = 1;
- break;
+ case OP_ADDIUSP_INT:
+ return match_addiusp_operand (arg, operand);
- case BFD_RELOC_16_PCREL_S2:
- {
- int shift;
+ case OP_CLO_CLZ_DEST:
+ return match_clo_clz_dest_operand (arg, operand);
- shift = mips_opts.micromips ? 1 : 2;
- if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
- as_bad (_("branch to misaligned address (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- if (!mips_relax_branch)
- {
- if ((address_expr->X_add_number + (1 << (shift + 15)))
- & ~((1 << (shift + 16)) - 1))
- as_bad (_("branch address range overflow (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- ip->insn_opcode |= ((address_expr->X_add_number >> shift)
- & 0xffff);
- }
- }
- break;
+ case OP_LWM_SWM_LIST:
+ return match_lwm_swm_list_operand (arg, operand);
- default:
- {
- offsetT value;
+ case OP_ENTRY_EXIT_LIST:
+ return match_entry_exit_operand (arg, operand);
- if (calculate_reloc (*reloc_type, address_expr->X_add_number,
- &value))
- {
- ip->insn_opcode |= value & 0xffff;
- ip->complete_p = 1;
- }
- }
- break;
- }
- }
+ case OP_SAVE_RESTORE_LIST:
+ return match_save_restore_list_operand (arg);
- if (mips_relax.sequence != 2 && !mips_opts.noreorder)
- {
- /* There are a lot of optimizations we could do that we don't.
- In particular, we do not, in general, reorder instructions.
- If you use gcc with optimization, it will reorder
- instructions and generally do much more optimization then we
- do here; repeating all that work in the assembler would only
- benefit hand written assembly code, and does not seem worth
- it. */
- int nops = (mips_optimize == 0
- ? nops_for_insn (0, history, NULL)
- : nops_for_insn_or_target (0, history, ip));
- if (nops > 0)
- {
- fragS *old_frag;
- unsigned long old_frag_offset;
- int i;
+ case OP_MDMX_IMM_REG:
+ return match_mdmx_imm_reg_operand (arg, operand);
- old_frag = frag_now;
- old_frag_offset = frag_now_fix ();
+ case OP_REPEAT_DEST_REG:
+ return match_tied_reg_operand (arg, arg->dest_regno);
- for (i = 0; i < nops; i++)
- add_fixed_insn (NOP_INSN);
- insert_into_history (0, nops, NOP_INSN);
+ case OP_REPEAT_PREV_REG:
+ return match_tied_reg_operand (arg, arg->last_regno);
- if (listing)
- {
- listing_prev_line ();
- /* We may be at the start of a variant frag. In case we
- are, make sure there is enough space for the frag
- after the frags created by listing_prev_line. The
- argument to frag_grow here must be at least as large
- as the argument to all other calls to frag_grow in
- this file. We don't have to worry about being in the
- middle of a variant frag, because the variants insert
- all needed nop instructions themselves. */
- frag_grow (40);
- }
+ case OP_PC:
+ return match_pc_operand (arg);
- mips_move_text_labels ();
+ case OP_VU0_SUFFIX:
+ return match_vu0_suffix_operand (arg, operand, FALSE);
-#ifndef NO_ECOFF_DEBUGGING
- if (ECOFF_DEBUGGING)
- ecoff_fix_loc (old_frag, old_frag_offset);
-#endif
- }
+ case OP_VU0_MATCH_SUFFIX:
+ return match_vu0_suffix_operand (arg, operand, TRUE);
+
+ case OP_IMM_INDEX:
+ return match_imm_index_operand (arg, operand);
+
+ case OP_REG_INDEX:
+ return match_reg_index_operand (arg, operand);
}
- else if (mips_relax.sequence != 2 && prev_nop_frag != NULL)
+ abort ();
+}
+
+/* ARG is the state after successfully matching an instruction.
+ Issue any queued-up warnings. */
+
+static void
+check_completed_insn (struct mips_arg_info *arg)
+{
+ if (arg->seen_at)
{
- int nops;
+ if (AT == ATREG)
+ as_warn (_("used $at without \".set noat\""));
+ else
+ as_warn (_("used $%u with \".set at=$%u\""), AT, AT);
+ }
+}
- /* Work out how many nops in prev_nop_frag are needed by IP,
- ignoring hazards generated by the first prev_nop_frag_since
- instructions. */
- nops = nops_for_insn_or_target (prev_nop_frag_since, history, ip);
- gas_assert (nops <= prev_nop_frag_holds);
+/* Return true if modifying general-purpose register REG needs a delay. */
- /* Enforce NOPS as a minimum. */
- if (nops > prev_nop_frag_required)
- prev_nop_frag_required = nops;
+static bfd_boolean
+reg_needs_delay (unsigned int reg)
+{
+ unsigned long prev_pinfo;
- if (prev_nop_frag_holds == prev_nop_frag_required)
- {
- /* Settle for the current number of nops. Update the history
- accordingly (for the benefit of any future .set reorder code). */
- prev_nop_frag = NULL;
- insert_into_history (prev_nop_frag_since,
- prev_nop_frag_holds, NOP_INSN);
- }
- else
- {
- /* Allow this instruction to replace one of the nops that was
- tentatively added to prev_nop_frag. */
- prev_nop_frag->fr_fix -= NOP_INSN_SIZE;
- prev_nop_frag_holds--;
- prev_nop_frag_since++;
- }
- }
+ prev_pinfo = history[0].insn_mo->pinfo;
+ if (!mips_opts.noreorder
+ && (((prev_pinfo & INSN_LOAD_MEMORY_DELAY) && !gpr_interlocks)
+ || ((prev_pinfo & INSN_LOAD_COPROC_DELAY) && !cop_interlocks))
+ && (gpr_write_mask (&history[0]) & (1 << reg)))
+ return TRUE;
- method = get_append_method (ip, address_expr, reloc_type);
- branch_disp = method == APPEND_SWAP ? insn_length (history) : 0;
+ return FALSE;
+}
- dwarf2_emit_insn (0);
- /* We want MIPS16 and microMIPS debug info to use ISA-encoded addresses,
- so "move" the instruction address accordingly.
+/* Classify an instruction according to the FIX_VR4120_* enumeration.
+ Return NUM_FIX_VR4120_CLASSES if the instruction isn't affected
+ by VR4120 errata. */
- Also, it doesn't seem appropriate for the assembler to reorder .loc
- entries. If this instruction is a branch that we are going to swap
- with the previous instruction, the two instructions should be
- treated as a unit, and the debug information for both instructions
- should refer to the start of the branch sequence. Using the
- current position is certainly wrong when swapping a 32-bit branch
- and a 16-bit delay slot, since the current position would then be
- in the middle of a branch. */
- dwarf2_move_insn ((HAVE_CODE_COMPRESSION ? 1 : 0) - branch_disp);
+static unsigned int
+classify_vr4120_insn (const char *name)
+{
+ if (strncmp (name, "macc", 4) == 0)
+ return FIX_VR4120_MACC;
+ if (strncmp (name, "dmacc", 5) == 0)
+ return FIX_VR4120_DMACC;
+ if (strncmp (name, "mult", 4) == 0)
+ return FIX_VR4120_MULT;
+ if (strncmp (name, "dmult", 5) == 0)
+ return FIX_VR4120_DMULT;
+ if (strstr (name, "div"))
+ return FIX_VR4120_DIV;
+ if (strcmp (name, "mtlo") == 0 || strcmp (name, "mthi") == 0)
+ return FIX_VR4120_MTHILO;
+ return NUM_FIX_VR4120_CLASSES;
+}
- relax32 = (mips_relax_branch
- /* Don't try branch relaxation within .set nomacro, or within
- .set noat if we use $at for PIC computations. If it turns
- out that the branch was out-of-range, we'll get an error. */
- && !mips_opts.warn_about_macros
- && (mips_opts.at || mips_pic == NO_PIC)
- /* Don't relax BPOSGE32/64 or BC1ANY2T/F and BC1ANY4T/F
- as they have no complementing branches. */
- && !(ip->insn_mo->ase & (ASE_MIPS3D | ASE_DSP64 | ASE_DSP)));
+#define INSN_ERET 0x42000018
+#define INSN_DERET 0x4200001f
- if (!HAVE_CODE_COMPRESSION
- && address_expr
- && relax32
- && *reloc_type == BFD_RELOC_16_PCREL_S2
- && delayed_branch_p (ip))
- {
- relaxed_branch = TRUE;
- add_relaxed_insn (ip, (relaxed_branch_length
- (NULL, NULL,
- uncond_branch_p (ip) ? -1
- : branch_likely_p (ip) ? 1
- : 0)), 4,
- RELAX_BRANCH_ENCODE
- (AT,
- uncond_branch_p (ip),
- branch_likely_p (ip),
- pinfo & INSN_WRITE_GPR_31,
- 0),
- address_expr->X_add_symbol,
- address_expr->X_add_number);
- *reloc_type = BFD_RELOC_UNUSED;
- }
- else if (mips_opts.micromips
- && address_expr
- && ((relax32 && *reloc_type == BFD_RELOC_16_PCREL_S2)
- || *reloc_type > BFD_RELOC_UNUSED)
- && (delayed_branch_p (ip) || compact_branch_p (ip))
- /* Don't try branch relaxation when users specify
- 16-bit/32-bit instructions. */
- && !forced_insn_length)
- {
- bfd_boolean relax16 = *reloc_type > BFD_RELOC_UNUSED;
- int type = relax16 ? *reloc_type - BFD_RELOC_UNUSED : 0;
- int uncond = uncond_branch_p (ip) ? -1 : 0;
- int compact = compact_branch_p (ip);
- int al = pinfo & INSN_WRITE_GPR_31;
- int length32;
+/* Return the number of instructions that must separate INSN1 and INSN2,
+ where INSN1 is the earlier instruction. Return the worst-case value
+ for any INSN2 if INSN2 is null. */
- gas_assert (address_expr != NULL);
- gas_assert (!mips_relax.sequence);
+static unsigned int
+insns_between (const struct mips_cl_insn *insn1,
+ const struct mips_cl_insn *insn2)
+{
+ unsigned long pinfo1, pinfo2;
+ unsigned int mask;
- relaxed_branch = TRUE;
- length32 = relaxed_micromips_32bit_branch_length (NULL, NULL, uncond);
- add_relaxed_insn (ip, relax32 ? length32 : 4, relax16 ? 2 : 4,
- RELAX_MICROMIPS_ENCODE (type, AT, uncond, compact, al,
- relax32, 0, 0),
- address_expr->X_add_symbol,
- address_expr->X_add_number);
- *reloc_type = BFD_RELOC_UNUSED;
- }
- else if (mips_opts.mips16 && *reloc_type > BFD_RELOC_UNUSED)
+ /* If INFO2 is null, pessimistically assume that all flags are set for
+ the second instruction. */
+ pinfo1 = insn1->insn_mo->pinfo;
+ pinfo2 = insn2 ? insn2->insn_mo->pinfo : ~0U;
+
+ /* For most targets, write-after-read dependencies on the HI and LO
+ registers must be separated by at least two instructions. */
+ if (!hilo_interlocks)
{
- /* We need to set up a variant frag. */
- gas_assert (address_expr != NULL);
- add_relaxed_insn (ip, 4, 0,
- RELAX_MIPS16_ENCODE
- (*reloc_type - BFD_RELOC_UNUSED,
- forced_insn_length == 2, forced_insn_length == 4,
- delayed_branch_p (&history[0]),
- history[0].mips16_absolute_jump_p),
- make_expr_symbol (address_expr), 0);
+ if ((pinfo1 & INSN_READ_LO) && (pinfo2 & INSN_WRITE_LO))
+ return 2;
+ if ((pinfo1 & INSN_READ_HI) && (pinfo2 & INSN_WRITE_HI))
+ return 2;
}
- else if (mips_opts.mips16 && insn_length (ip) == 2)
+
+ /* If we're working around r7000 errata, there must be two instructions
+ between an mfhi or mflo and any instruction that uses the result. */
+ if (mips_7000_hilo_fix
+ && !mips_opts.micromips
+ && MF_HILO_INSN (pinfo1)
+ && (insn2 == NULL || (gpr_read_mask (insn2) & gpr_write_mask (insn1))))
+ return 2;
+
+ /* If we're working around 24K errata, one instruction is required
+ if an ERET or DERET is followed by a branch instruction. */
+ if (mips_fix_24k && !mips_opts.micromips)
{
- if (!delayed_branch_p (ip))
- /* Make sure there is enough room to swap this instruction with
- a following jump instruction. */
- frag_grow (6);
- add_fixed_insn (ip);
+ if (insn1->insn_opcode == INSN_ERET
+ || insn1->insn_opcode == INSN_DERET)
+ {
+ if (insn2 == NULL
+ || insn2->insn_opcode == INSN_ERET
+ || insn2->insn_opcode == INSN_DERET
+ || delayed_branch_p (insn2))
+ return 1;
+ }
}
- else
+
+ /* If working around VR4120 errata, check for combinations that need
+ a single intervening instruction. */
+ if (mips_fix_vr4120 && !mips_opts.micromips)
{
- if (mips_opts.mips16
- && mips_opts.noreorder
- && delayed_branch_p (&history[0]))
- as_warn (_("extended instruction in delay slot"));
+ unsigned int class1, class2;
- if (mips_relax.sequence)
+ class1 = classify_vr4120_insn (insn1->insn_mo->name);
+ if (class1 != NUM_FIX_VR4120_CLASSES && vr4120_conflicts[class1] != 0)
{
- /* If we've reached the end of this frag, turn it into a variant
- frag and record the information for the instructions we've
- written so far. */
- if (frag_room () < 4)
- relax_close_frag ();
- mips_relax.sizes[mips_relax.sequence - 1] += insn_length (ip);
+ if (insn2 == NULL)
+ return 1;
+ class2 = classify_vr4120_insn (insn2->insn_mo->name);
+ if (vr4120_conflicts[class1] & (1 << class2))
+ return 1;
}
+ }
- if (mips_relax.sequence != 2)
- {
- if (mips_macro_warning.first_insn_sizes[0] == 0)
- mips_macro_warning.first_insn_sizes[0] = insn_length (ip);
- mips_macro_warning.sizes[0] += insn_length (ip);
- mips_macro_warning.insns[0]++;
- }
- if (mips_relax.sequence != 1)
+ if (!HAVE_CODE_COMPRESSION)
+ {
+ /* Check for GPR or coprocessor load delays. All such delays
+ are on the RT register. */
+ /* Itbl support may require additional care here. */
+ if ((!gpr_interlocks && (pinfo1 & INSN_LOAD_MEMORY_DELAY))
+ || (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC_DELAY)))
{
- if (mips_macro_warning.first_insn_sizes[1] == 0)
- mips_macro_warning.first_insn_sizes[1] = insn_length (ip);
- mips_macro_warning.sizes[1] += insn_length (ip);
- mips_macro_warning.insns[1]++;
+ if (insn2 == NULL || (gpr_read_mask (insn2) & gpr_write_mask (insn1)))
+ return 1;
}
- if (mips_opts.mips16)
+ /* Check for generic coprocessor hazards.
+
+ This case is not handled very well. There is no special
+ knowledge of CP0 handling, and the coprocessors other than
+ the floating point unit are not distinguished at all. */
+ /* Itbl support may require additional care here. FIXME!
+ Need to modify this to include knowledge about
+ user specified delays! */
+ else if ((!cop_interlocks && (pinfo1 & INSN_COPROC_MOVE_DELAY))
+ || (!cop_mem_interlocks && (pinfo1 & INSN_COPROC_MEMORY_DELAY)))
{
- ip->fixed_p = 1;
- ip->mips16_absolute_jump_p = (*reloc_type == BFD_RELOC_MIPS16_JMP);
+ /* Handle cases where INSN1 writes to a known general coprocessor
+ register. There must be a one instruction delay before INSN2
+ if INSN2 reads that register, otherwise no delay is needed. */
+ mask = fpr_write_mask (insn1);
+ if (mask != 0)
+ {
+ if (!insn2 || (mask & fpr_read_mask (insn2)) != 0)
+ return 1;
+ }
+ else
+ {
+ /* Read-after-write dependencies on the control registers
+ require a two-instruction gap. */
+ if ((pinfo1 & INSN_WRITE_COND_CODE)
+ && (pinfo2 & INSN_READ_COND_CODE))
+ return 2;
+
+ /* We don't know exactly what INSN1 does. If INSN2 is
+ also a coprocessor instruction, assume there must be
+ a one instruction gap. */
+ if (pinfo2 & INSN_COP)
+ return 1;
+ }
}
- add_fixed_insn (ip);
- }
- if (!ip->complete_p && *reloc_type < BFD_RELOC_UNUSED)
- {
- bfd_reloc_code_real_type final_type[3];
- reloc_howto_type *howto0;
- reloc_howto_type *howto;
- int i;
-
- /* Perform any necessary conversion to microMIPS relocations
- and find out how many relocations there actually are. */
- for (i = 0; i < 3 && reloc_type[i] != BFD_RELOC_UNUSED; i++)
- final_type[i] = micromips_map_reloc (reloc_type[i]);
-
- /* In a compound relocation, it is the final (outermost)
- operator that determines the relocated field. */
- howto = howto0 = bfd_reloc_type_lookup (stdoutput, final_type[i - 1]);
- if (!howto)
- abort ();
-
- if (i > 1)
- howto0 = bfd_reloc_type_lookup (stdoutput, final_type[0]);
- ip->fixp[0] = fix_new_exp (ip->frag, ip->where,
- bfd_get_reloc_size (howto),
- address_expr,
- howto0 && howto0->pc_relative,
- final_type[0]);
+ /* Check for read-after-write dependencies on the coprocessor
+ control registers in cases where INSN1 does not need a general
+ coprocessor delay. This means that INSN1 is a floating point
+ comparison instruction. */
+ /* Itbl support may require additional care here. */
+ else if (!cop_interlocks
+ && (pinfo1 & INSN_WRITE_COND_CODE)
+ && (pinfo2 & INSN_READ_COND_CODE))
+ return 1;
+ }
- /* Tag symbols that have a R_MIPS16_26 relocation against them. */
- if (final_type[0] == BFD_RELOC_MIPS16_JMP && ip->fixp[0]->fx_addsy)
- *symbol_get_tc (ip->fixp[0]->fx_addsy) = 1;
+ return 0;
+}
- /* These relocations can have an addend that won't fit in
- 4 octets for 64bit assembly. */
- if (HAVE_64BIT_GPRS
- && ! howto->partial_inplace
- && (reloc_type[0] == BFD_RELOC_16
- || reloc_type[0] == BFD_RELOC_32
- || reloc_type[0] == BFD_RELOC_MIPS_JMP
- || reloc_type[0] == BFD_RELOC_GPREL16
- || reloc_type[0] == BFD_RELOC_MIPS_LITERAL
- || reloc_type[0] == BFD_RELOC_GPREL32
- || reloc_type[0] == BFD_RELOC_64
- || reloc_type[0] == BFD_RELOC_CTOR
- || reloc_type[0] == BFD_RELOC_MIPS_SUB
- || reloc_type[0] == BFD_RELOC_MIPS_HIGHEST
- || reloc_type[0] == BFD_RELOC_MIPS_HIGHER
- || reloc_type[0] == BFD_RELOC_MIPS_SCN_DISP
- || reloc_type[0] == BFD_RELOC_MIPS_REL16
- || reloc_type[0] == BFD_RELOC_MIPS_RELGOT
- || reloc_type[0] == BFD_RELOC_MIPS16_GPREL
- || hi16_reloc_p (reloc_type[0])
- || lo16_reloc_p (reloc_type[0])))
- ip->fixp[0]->fx_no_overflow = 1;
+/* Return the number of nops that would be needed to work around the
+ VR4130 mflo/mfhi errata if instruction INSN immediately followed
+ the MAX_VR4130_NOPS instructions described by HIST. Ignore hazards
+ that are contained within the first IGNORE instructions of HIST. */
- /* These relocations can have an addend that won't fit in 2 octets. */
- if (reloc_type[0] == BFD_RELOC_MICROMIPS_7_PCREL_S1
- || reloc_type[0] == BFD_RELOC_MICROMIPS_10_PCREL_S1)
- ip->fixp[0]->fx_no_overflow = 1;
+static int
+nops_for_vr4130 (int ignore, const struct mips_cl_insn *hist,
+ const struct mips_cl_insn *insn)
+{
+ int i, j;
+ unsigned int mask;
- if (mips_relax.sequence)
- {
- if (mips_relax.first_fixup == 0)
- mips_relax.first_fixup = ip->fixp[0];
- }
- else if (reloc_needs_lo_p (*reloc_type))
- {
- struct mips_hi_fixup *hi_fixup;
+ /* Check if the instruction writes to HI or LO. MTHI and MTLO
+ are not affected by the errata. */
+ if (insn != 0
+ && ((insn->insn_mo->pinfo & (INSN_WRITE_HI | INSN_WRITE_LO)) == 0
+ || strcmp (insn->insn_mo->name, "mtlo") == 0
+ || strcmp (insn->insn_mo->name, "mthi") == 0))
+ return 0;
- /* Reuse the last entry if it already has a matching %lo. */
- hi_fixup = mips_hi_fixup_list;
- if (hi_fixup == 0
- || !fixup_has_matching_lo_p (hi_fixup->fixp))
- {
- hi_fixup = ((struct mips_hi_fixup *)
- xmalloc (sizeof (struct mips_hi_fixup)));
- hi_fixup->next = mips_hi_fixup_list;
- mips_hi_fixup_list = hi_fixup;
- }
- hi_fixup->fixp = ip->fixp[0];
- hi_fixup->seg = now_seg;
- }
+ /* Search for the first MFLO or MFHI. */
+ for (i = 0; i < MAX_VR4130_NOPS; i++)
+ if (MF_HILO_INSN (hist[i].insn_mo->pinfo))
+ {
+ /* Extract the destination register. */
+ mask = gpr_write_mask (&hist[i]);
- /* Add fixups for the second and third relocations, if given.
- Note that the ABI allows the second relocation to be
- against RSS_UNDEF, RSS_GP, RSS_GP0 or RSS_LOC. At the
- moment we only use RSS_UNDEF, but we could add support
- for the others if it ever becomes necessary. */
- for (i = 1; i < 3; i++)
- if (reloc_type[i] != BFD_RELOC_UNUSED)
- {
- ip->fixp[i] = fix_new (ip->frag, ip->where,
- ip->fixp[0]->fx_size, NULL, 0,
- FALSE, final_type[i]);
+ /* No nops are needed if INSN reads that register. */
+ if (insn != NULL && (gpr_read_mask (insn) & mask) != 0)
+ return 0;
- /* Use fx_tcbit to mark compound relocs. */
- ip->fixp[0]->fx_tcbit = 1;
- ip->fixp[i]->fx_tcbit = 1;
- }
- }
- install_insn (ip);
+ /* ...or if any of the intervening instructions do. */
+ for (j = 0; j < i; j++)
+ if (gpr_read_mask (&hist[j]) & mask)
+ return 0;
- /* Update the register mask information. */
- mips_gprmask |= gpr_read_mask (ip) | gpr_write_mask (ip);
- mips_cprmask[1] |= fpr_read_mask (ip) | fpr_write_mask (ip);
+ if (i >= ignore)
+ return MAX_VR4130_NOPS - i;
+ }
+ return 0;
+}
- switch (method)
- {
- case APPEND_ADD:
- insert_into_history (0, 1, ip);
- break;
+#define BASE_REG_EQ(INSN1, INSN2) \
+ ((((INSN1) >> OP_SH_RS) & OP_MASK_RS) \
+ == (((INSN2) >> OP_SH_RS) & OP_MASK_RS))
- case APPEND_ADD_WITH_NOP:
- {
- struct mips_cl_insn *nop;
+/* Return the minimum alignment for this store instruction. */
- insert_into_history (0, 1, ip);
- nop = get_delay_slot_nop (ip);
- add_fixed_insn (nop);
- insert_into_history (0, 1, nop);
- if (mips_relax.sequence)
- mips_relax.sizes[mips_relax.sequence - 1] += insn_length (nop);
- }
- break;
+static int
+fix_24k_align_to (const struct mips_opcode *mo)
+{
+ if (strcmp (mo->name, "sh") == 0)
+ return 2;
- case APPEND_ADD_COMPACT:
- /* Convert MIPS16 jr/jalr into a "compact" jump. */
- gas_assert (mips_opts.mips16);
- ip->insn_opcode |= 0x0080;
- find_altered_mips16_opcode (ip);
- install_insn (ip);
- insert_into_history (0, 1, ip);
- break;
+ if (strcmp (mo->name, "swc1") == 0
+ || strcmp (mo->name, "swc2") == 0
+ || strcmp (mo->name, "sw") == 0
+ || strcmp (mo->name, "sc") == 0
+ || strcmp (mo->name, "s.s") == 0)
+ return 4;
- case APPEND_SWAP:
- {
- struct mips_cl_insn delay = history[0];
- if (mips_opts.mips16)
- {
- know (delay.frag == ip->frag);
- move_insn (ip, delay.frag, delay.where);
- move_insn (&delay, ip->frag, ip->where + insn_length (ip));
- }
- else if (relaxed_branch || delay.frag != ip->frag)
- {
- /* Add the delay slot instruction to the end of the
- current frag and shrink the fixed part of the
- original frag. If the branch occupies the tail of
- the latter, move it backwards to cover the gap. */
- delay.frag->fr_fix -= branch_disp;
- if (delay.frag == ip->frag)
- move_insn (ip, ip->frag, ip->where - branch_disp);
- add_fixed_insn (&delay);
- }
- else
- {
- move_insn (&delay, ip->frag,
- ip->where - branch_disp + insn_length (ip));
- move_insn (ip, history[0].frag, history[0].where);
- }
- history[0] = *ip;
- delay.fixed_p = 1;
- insert_into_history (0, 1, &delay);
- }
- break;
- }
+ if (strcmp (mo->name, "sdc1") == 0
+ || strcmp (mo->name, "sdc2") == 0
+ || strcmp (mo->name, "s.d") == 0)
+ return 8;
- /* If we have just completed an unconditional branch, clear the history. */
- if ((delayed_branch_p (&history[1]) && uncond_branch_p (&history[1]))
- || (compact_branch_p (&history[0]) && uncond_branch_p (&history[0])))
- {
- unsigned int i;
+ /* sb, swl, swr */
+ return 1;
+}
- mips_no_prev_insn ();
+struct fix_24k_store_info
+ {
+ /* Immediate offset, if any, for this store instruction. */
+ short off;
+ /* Alignment required by this store instruction. */
+ int align_to;
+ /* True for register offsets. */
+ int register_offset;
+ };
- for (i = 0; i < ARRAY_SIZE (history); i++)
- history[i].cleared_p = 1;
- }
+/* Comparison function used by qsort. */
- /* We need to emit a label at the end of branch-likely macros. */
- if (emit_branch_likely_macro)
- {
- emit_branch_likely_macro = FALSE;
- micromips_add_label ();
- }
+static int
+fix_24k_sort (const void *a, const void *b)
+{
+ const struct fix_24k_store_info *pos1 = a;
+ const struct fix_24k_store_info *pos2 = b;
- /* We just output an insn, so the next one doesn't have a label. */
- mips_clear_insn_labels ();
+ return (pos1->off - pos2->off);
}
-/* Forget that there was any previous instruction or label.
- When BRANCH is true, the branch history is also flushed. */
+/* INSN is a store instruction. Try to record the store information
+ in STINFO. Return false if the information isn't known. */
-static void
-mips_no_prev_insn (void)
-{
- prev_nop_frag = NULL;
- insert_into_history (0, ARRAY_SIZE (history), NOP_INSN);
- mips_clear_insn_labels ();
+static bfd_boolean
+fix_24k_record_store_info (struct fix_24k_store_info *stinfo,
+ const struct mips_cl_insn *insn)
+{
+ /* The instruction must have a known offset. */
+ if (!insn->complete_p || !strstr (insn->insn_mo->args, "o("))
+ return FALSE;
+
+ stinfo->off = (insn->insn_opcode >> OP_SH_IMMEDIATE) & OP_MASK_IMMEDIATE;
+ stinfo->align_to = fix_24k_align_to (insn->insn_mo);
+ return TRUE;
}
-/* This function must be called before we emit something other than
- instructions. It is like mips_no_prev_insn except that it inserts
- any NOPS that might be needed by previous instructions. */
+/* Return the number of nops that would be needed to work around the 24k
+ "lost data on stores during refill" errata if instruction INSN
+ immediately followed the 2 instructions described by HIST.
+ Ignore hazards that are contained within the first IGNORE
+ instructions of HIST.
-void
-mips_emit_delays (void)
-{
- if (! mips_opts.noreorder)
- {
- int nops = nops_for_insn (0, history, NULL);
- if (nops > 0)
- {
- while (nops-- > 0)
- add_fixed_insn (NOP_INSN);
- mips_move_text_labels ();
- }
- }
- mips_no_prev_insn ();
-}
+ Problem: The FSB (fetch store buffer) acts as an intermediate buffer
+ for the data cache refills and store data. The following describes
+ the scenario where the store data could be lost.
-/* Start a (possibly nested) noreorder block. */
+ * A data cache miss, due to either a load or a store, causing fill
+ data to be supplied by the memory subsystem
+ * The first three doublewords of fill data are returned and written
+ into the cache
+ * A sequence of four stores occurs in consecutive cycles around the
+ final doubleword of the fill:
+ * Store A
+ * Store B
+ * Store C
+ * Zero, One or more instructions
+ * Store D
-static void
-start_noreorder (void)
+ The four stores A-D must be to different doublewords of the line that
+ is being filled. The fourth instruction in the sequence above permits
+ the fill of the final doubleword to be transferred from the FSB into
+ the cache. In the sequence above, the stores may be either integer
+ (sb, sh, sw, swr, swl, sc) or coprocessor (swc1/swc2, sdc1/sdc2,
+ swxc1, sdxc1, suxc1) stores, as long as the four stores are to
+ different doublewords on the line. If the floating point unit is
+ running in 1:2 mode, it is not possible to create the sequence above
+ using only floating point store instructions.
+
+ In this case, the cache line being filled is incorrectly marked
+ invalid, thereby losing the data from any store to the line that
+ occurs between the original miss and the completion of the five
+ cycle sequence shown above.
+
+ The workarounds are:
+
+ * Run the data cache in write-through mode.
+ * Insert a non-store instruction between
+ Store A and Store B or Store B and Store C. */
+
+static int
+nops_for_24k (int ignore, const struct mips_cl_insn *hist,
+ const struct mips_cl_insn *insn)
{
- if (mips_opts.noreorder == 0)
- {
- unsigned int i;
- int nops;
+ struct fix_24k_store_info pos[3];
+ int align, i, base_offset;
- /* None of the instructions before the .set noreorder can be moved. */
- for (i = 0; i < ARRAY_SIZE (history); i++)
- history[i].fixed_p = 1;
+ if (ignore >= 2)
+ return 0;
- /* Insert any nops that might be needed between the .set noreorder
- block and the previous instructions. We will later remove any
- nops that turn out not to be needed. */
- nops = nops_for_insn (0, history, NULL);
- if (nops > 0)
- {
- if (mips_optimize != 0)
- {
- /* Record the frag which holds the nop instructions, so
- that we can remove them if we don't need them. */
- frag_grow (nops * NOP_INSN_SIZE);
- prev_nop_frag = frag_now;
- prev_nop_frag_holds = nops;
- prev_nop_frag_required = 0;
- prev_nop_frag_since = 0;
- }
+ /* If the previous instruction wasn't a store, there's nothing to
+ worry about. */
+ if ((hist[0].insn_mo->pinfo & INSN_STORE_MEMORY) == 0)
+ return 0;
- for (; nops > 0; --nops)
- add_fixed_insn (NOP_INSN);
+ /* If the instructions after the previous one are unknown, we have
+ to assume the worst. */
+ if (!insn)
+ return 1;
- /* Move on to a new frag, so that it is safe to simply
- decrease the size of prev_nop_frag. */
- frag_wane (frag_now);
- frag_new (0);
- mips_move_text_labels ();
- }
- mips_mark_labels ();
- mips_clear_insn_labels ();
- }
- mips_opts.noreorder++;
- mips_any_noreorder = 1;
-}
+ /* Check whether we are dealing with three consecutive stores. */
+ if ((insn->insn_mo->pinfo & INSN_STORE_MEMORY) == 0
+ || (hist[1].insn_mo->pinfo & INSN_STORE_MEMORY) == 0)
+ return 0;
-/* End a nested noreorder block. */
+ /* If we don't know the relationship between the store addresses,
+ assume the worst. */
+ if (!BASE_REG_EQ (insn->insn_opcode, hist[0].insn_opcode)
+ || !BASE_REG_EQ (insn->insn_opcode, hist[1].insn_opcode))
+ return 1;
-static void
-end_noreorder (void)
-{
- mips_opts.noreorder--;
- if (mips_opts.noreorder == 0 && prev_nop_frag != NULL)
- {
- /* Commit to inserting prev_nop_frag_required nops and go back to
- handling nop insertion the .set reorder way. */
- prev_nop_frag->fr_fix -= ((prev_nop_frag_holds - prev_nop_frag_required)
- * NOP_INSN_SIZE);
- insert_into_history (prev_nop_frag_since,
- prev_nop_frag_required, NOP_INSN);
- prev_nop_frag = NULL;
- }
-}
+ if (!fix_24k_record_store_info (&pos[0], insn)
+ || !fix_24k_record_store_info (&pos[1], &hist[0])
+ || !fix_24k_record_store_info (&pos[2], &hist[1]))
+ return 1;
-/* Set up global variables for the start of a new macro. */
+ qsort (&pos, 3, sizeof (struct fix_24k_store_info), fix_24k_sort);
-static void
-macro_start (void)
-{
- memset (&mips_macro_warning.sizes, 0, sizeof (mips_macro_warning.sizes));
- memset (&mips_macro_warning.first_insn_sizes, 0,
- sizeof (mips_macro_warning.first_insn_sizes));
- memset (&mips_macro_warning.insns, 0, sizeof (mips_macro_warning.insns));
- mips_macro_warning.delay_slot_p = (mips_opts.noreorder
- && delayed_branch_p (&history[0]));
- switch (history[0].insn_mo->pinfo2
- & (INSN2_BRANCH_DELAY_32BIT | INSN2_BRANCH_DELAY_16BIT))
+ /* Pick a value of ALIGN and X such that all offsets are adjusted by
+ X bytes and such that the base register + X is known to be aligned
+ to align bytes. */
+
+ if (((insn->insn_opcode >> OP_SH_RS) & OP_MASK_RS) == SP)
+ align = 8;
+ else
{
- case INSN2_BRANCH_DELAY_32BIT:
- mips_macro_warning.delay_slot_length = 4;
- break;
- case INSN2_BRANCH_DELAY_16BIT:
- mips_macro_warning.delay_slot_length = 2;
- break;
- default:
- mips_macro_warning.delay_slot_length = 0;
- break;
+ align = pos[0].align_to;
+ base_offset = pos[0].off;
+ for (i = 1; i < 3; i++)
+ if (align < pos[i].align_to)
+ {
+ align = pos[i].align_to;
+ base_offset = pos[i].off;
+ }
+ for (i = 0; i < 3; i++)
+ pos[i].off -= base_offset;
}
- mips_macro_warning.first_frag = NULL;
-}
-/* Given that a macro is longer than one instruction or of the wrong size,
- return the appropriate warning for it. Return null if no warning is
- needed. SUBTYPE is a bitmask of RELAX_DELAY_SLOT, RELAX_DELAY_SLOT_16BIT,
- RELAX_DELAY_SLOT_SIZE_FIRST, RELAX_DELAY_SLOT_SIZE_SECOND,
- and RELAX_NOMACRO. */
+ pos[0].off &= ~align + 1;
+ pos[1].off &= ~align + 1;
+ pos[2].off &= ~align + 1;
-static const char *
-macro_warning (relax_substateT subtype)
-{
- if (subtype & RELAX_DELAY_SLOT)
- return _("Macro instruction expanded into multiple instructions"
- " in a branch delay slot");
- else if (subtype & RELAX_NOMACRO)
- return _("Macro instruction expanded into multiple instructions");
- else if (subtype & (RELAX_DELAY_SLOT_SIZE_FIRST
- | RELAX_DELAY_SLOT_SIZE_SECOND))
- return ((subtype & RELAX_DELAY_SLOT_16BIT)
- ? _("Macro instruction expanded into a wrong size instruction"
- " in a 16-bit branch delay slot")
- : _("Macro instruction expanded into a wrong size instruction"
- " in a 32-bit branch delay slot"));
- else
+ /* If any two stores write to the same chunk, they also write to the
+ same doubleword. The offsets are still sorted at this point. */
+ if (pos[0].off == pos[1].off || pos[1].off == pos[2].off)
+ return 0;
+
+ /* A range of at least 9 bytes is needed for the stores to be in
+ non-overlapping doublewords. */
+ if (pos[2].off - pos[0].off <= 8)
+ return 0;
+
+ if (pos[2].off - pos[1].off >= 24
+ || pos[1].off - pos[0].off >= 24
+ || pos[2].off - pos[0].off >= 32)
return 0;
+
+ return 1;
}
-/* Finish up a macro. Emit warnings as appropriate. */
+/* Return the number of nops that would be needed if instruction INSN
+ immediately followed the MAX_NOPS instructions given by HIST,
+ where HIST[0] is the most recent instruction. Ignore hazards
+ between INSN and the first IGNORE instructions in HIST.
-static void
-macro_end (void)
+ If INSN is null, return the worse-case number of nops for any
+ instruction. */
+
+static int
+nops_for_insn (int ignore, const struct mips_cl_insn *hist,
+ const struct mips_cl_insn *insn)
{
- /* Relaxation warning flags. */
- relax_substateT subtype = 0;
+ int i, nops, tmp_nops;
- /* Check delay slot size requirements. */
- if (mips_macro_warning.delay_slot_length == 2)
- subtype |= RELAX_DELAY_SLOT_16BIT;
- if (mips_macro_warning.delay_slot_length != 0)
+ nops = 0;
+ for (i = ignore; i < MAX_DELAY_NOPS; i++)
{
- if (mips_macro_warning.delay_slot_length
- != mips_macro_warning.first_insn_sizes[0])
- subtype |= RELAX_DELAY_SLOT_SIZE_FIRST;
- if (mips_macro_warning.delay_slot_length
- != mips_macro_warning.first_insn_sizes[1])
- subtype |= RELAX_DELAY_SLOT_SIZE_SECOND;
- }
-
- /* Check instruction count requirements. */
- if (mips_macro_warning.insns[0] > 1 || mips_macro_warning.insns[1] > 1)
- {
- if (mips_macro_warning.insns[1] > mips_macro_warning.insns[0])
- subtype |= RELAX_SECOND_LONGER;
- if (mips_opts.warn_about_macros)
- subtype |= RELAX_NOMACRO;
- if (mips_macro_warning.delay_slot_p)
- subtype |= RELAX_DELAY_SLOT;
+ tmp_nops = insns_between (hist + i, insn) - i;
+ if (tmp_nops > nops)
+ nops = tmp_nops;
}
- /* If both alternatives fail to fill a delay slot correctly,
- emit the warning now. */
- if ((subtype & RELAX_DELAY_SLOT_SIZE_FIRST) != 0
- && (subtype & RELAX_DELAY_SLOT_SIZE_SECOND) != 0)
+ if (mips_fix_vr4130 && !mips_opts.micromips)
{
- relax_substateT s;
- const char *msg;
-
- s = subtype & (RELAX_DELAY_SLOT_16BIT
- | RELAX_DELAY_SLOT_SIZE_FIRST
- | RELAX_DELAY_SLOT_SIZE_SECOND);
- msg = macro_warning (s);
- if (msg != NULL)
- as_warn ("%s", msg);
- subtype &= ~s;
+ tmp_nops = nops_for_vr4130 (ignore, hist, insn);
+ if (tmp_nops > nops)
+ nops = tmp_nops;
}
- /* If both implementations are longer than 1 instruction, then emit the
- warning now. */
- if (mips_macro_warning.insns[0] > 1 && mips_macro_warning.insns[1] > 1)
+ if (mips_fix_24k && !mips_opts.micromips)
{
- relax_substateT s;
- const char *msg;
-
- s = subtype & (RELAX_SECOND_LONGER | RELAX_NOMACRO | RELAX_DELAY_SLOT);
- msg = macro_warning (s);
- if (msg != NULL)
- as_warn ("%s", msg);
- subtype &= ~s;
+ tmp_nops = nops_for_24k (ignore, hist, insn);
+ if (tmp_nops > nops)
+ nops = tmp_nops;
}
- /* If any flags still set, then one implementation might need a warning
- and the other either will need one of a different kind or none at all.
- Pass any remaining flags over to relaxation. */
- if (mips_macro_warning.first_frag != NULL)
- mips_macro_warning.first_frag->fr_subtype |= subtype;
+ return nops;
}
-/* Instruction operand formats used in macros that vary between
- standard MIPS and microMIPS code. */
+/* The variable arguments provide NUM_INSNS extra instructions that
+ might be added to HIST. Return the largest number of nops that
+ would be needed after the extended sequence, ignoring hazards
+ in the first IGNORE instructions. */
-static const char * const brk_fmt[2][2] = { { "c", "c" }, { "mF", "c" } };
-static const char * const cop12_fmt[2] = { "E,o(b)", "E,~(b)" };
-static const char * const jalr_fmt[2] = { "d,s", "t,s" };
-static const char * const lui_fmt[2] = { "t,u", "s,u" };
-static const char * const mem12_fmt[2] = { "t,o(b)", "t,~(b)" };
-static const char * const mfhl_fmt[2][2] = { { "d", "d" }, { "mj", "s" } };
-static const char * const shft_fmt[2] = { "d,w,<", "t,r,<" };
-static const char * const trap_fmt[2] = { "s,t,q", "s,t,|" };
+static int
+nops_for_sequence (int num_insns, int ignore,
+ const struct mips_cl_insn *hist, ...)
+{
+ va_list args;
+ struct mips_cl_insn buffer[MAX_NOPS];
+ struct mips_cl_insn *cursor;
+ int nops;
-#define BRK_FMT (brk_fmt[mips_opts.micromips][mips_opts.insn32])
-#define COP12_FMT (cop12_fmt[mips_opts.micromips])
-#define JALR_FMT (jalr_fmt[mips_opts.micromips])
-#define LUI_FMT (lui_fmt[mips_opts.micromips])
-#define MEM12_FMT (mem12_fmt[mips_opts.micromips])
-#define MFHL_FMT (mfhl_fmt[mips_opts.micromips][mips_opts.insn32])
-#define SHFT_FMT (shft_fmt[mips_opts.micromips])
-#define TRAP_FMT (trap_fmt[mips_opts.micromips])
+ va_start (args, hist);
+ cursor = buffer + num_insns;
+ memcpy (cursor, hist, (MAX_NOPS - num_insns) * sizeof (*cursor));
+ while (cursor > buffer)
+ *--cursor = *va_arg (args, const struct mips_cl_insn *);
-/* Read a macro's relocation codes from *ARGS and store them in *R.
- The first argument in *ARGS will be either the code for a single
- relocation or -1 followed by the three codes that make up a
- composite relocation. */
+ nops = nops_for_insn (ignore, buffer, NULL);
+ va_end (args);
+ return nops;
+}
-static void
-macro_read_relocs (va_list *args, bfd_reloc_code_real_type *r)
+/* Like nops_for_insn, but if INSN is a branch, take into account the
+ worst-case delay for the branch target. */
+
+static int
+nops_for_insn_or_target (int ignore, const struct mips_cl_insn *hist,
+ const struct mips_cl_insn *insn)
{
- int i, next;
+ int nops, tmp_nops;
- next = va_arg (*args, int);
- if (next >= 0)
- r[0] = (bfd_reloc_code_real_type) next;
- else
+ nops = nops_for_insn (ignore, hist, insn);
+ if (delayed_branch_p (insn))
{
- for (i = 0; i < 3; i++)
- r[i] = (bfd_reloc_code_real_type) va_arg (*args, int);
- /* This function is only used for 16-bit relocation fields.
- To make the macro code simpler, treat an unrelocated value
- in the same way as BFD_RELOC_LO16. */
- if (r[0] == BFD_RELOC_UNUSED)
- r[0] = BFD_RELOC_LO16;
+ tmp_nops = nops_for_sequence (2, ignore ? ignore + 2 : 0,
+ hist, insn, get_delay_slot_nop (insn));
+ if (tmp_nops > nops)
+ nops = tmp_nops;
+ }
+ else if (compact_branch_p (insn))
+ {
+ tmp_nops = nops_for_sequence (1, ignore ? ignore + 1 : 0, hist, insn);
+ if (tmp_nops > nops)
+ nops = tmp_nops;
}
+ return nops;
}
-/* Build an instruction created by a macro expansion. This is passed
- a pointer to the count of instructions created so far, an
- expression, the name of the instruction to build, an operand format
- string, and corresponding arguments. */
+/* Fix NOP issue: Replace nops by "or at,at,zero". */
static void
-macro_build (expressionS *ep, const char *name, const char *fmt, ...)
+fix_loongson2f_nop (struct mips_cl_insn * ip)
{
- const struct mips_opcode *mo = NULL;
- bfd_reloc_code_real_type r[3];
- const struct mips_opcode *amo;
- struct hash_control *hash;
- struct mips_cl_insn insn;
- va_list args;
+ gas_assert (!HAVE_CODE_COMPRESSION);
+ if (strcmp (ip->insn_mo->name, "nop") == 0)
+ ip->insn_opcode = LOONGSON2F_NOP_INSN;
+}
- va_start (args, fmt);
+/* Fix Jump Issue: Eliminate instruction fetch from outside 256M region
+ jr target pc &= 'hffff_ffff_cfff_ffff. */
- if (mips_opts.mips16)
+static void
+fix_loongson2f_jump (struct mips_cl_insn * ip)
+{
+ gas_assert (!HAVE_CODE_COMPRESSION);
+ if (strcmp (ip->insn_mo->name, "j") == 0
+ || strcmp (ip->insn_mo->name, "jr") == 0
+ || strcmp (ip->insn_mo->name, "jalr") == 0)
{
- mips16_macro_build (ep, name, fmt, &args);
- va_end (args);
- return;
- }
+ int sreg;
+ expressionS ep;
- r[0] = BFD_RELOC_UNUSED;
- r[1] = BFD_RELOC_UNUSED;
- r[2] = BFD_RELOC_UNUSED;
- hash = mips_opts.micromips ? micromips_op_hash : op_hash;
- amo = (struct mips_opcode *) hash_find (hash, name);
- gas_assert (amo);
- gas_assert (strcmp (name, amo->name) == 0);
+ if (! mips_opts.at)
+ return;
- do
- {
- /* Search until we get a match for NAME. It is assumed here that
- macros will never generate MDMX, MIPS-3D, or MT instructions.
- We try to match an instruction that fulfils the branch delay
- slot instruction length requirement (if any) of the previous
- instruction. While doing this we record the first instruction
- seen that matches all the other conditions and use it anyway
- if the requirement cannot be met; we will issue an appropriate
- warning later on. */
- if (strcmp (fmt, amo->args) == 0
- && amo->pinfo != INSN_MACRO
- && is_opcode_valid (amo)
- && is_size_valid (amo))
- {
- if (is_delay_slot_valid (amo))
- {
- mo = amo;
- break;
- }
- else if (!mo)
- mo = amo;
- }
+ sreg = EXTRACT_OPERAND (0, RS, *ip);
+ if (sreg == ZERO || sreg == KT0 || sreg == KT1 || sreg == ATREG)
+ return;
- ++amo;
- gas_assert (amo->name);
+ ep.X_op = O_constant;
+ ep.X_add_number = 0xcfff0000;
+ macro_build (&ep, "lui", "t,u", ATREG, BFD_RELOC_HI16);
+ ep.X_add_number = 0xffff;
+ macro_build (&ep, "ori", "t,r,i", ATREG, ATREG, BFD_RELOC_LO16);
+ macro_build (NULL, "and", "d,v,t", sreg, sreg, ATREG);
}
- while (strcmp (name, amo->name) == 0);
+}
- gas_assert (mo);
- create_insn (&insn, mo);
- for (;;)
- {
- switch (*fmt++)
- {
- case '\0':
- break;
+static void
+fix_loongson2f (struct mips_cl_insn * ip)
+{
+ if (mips_fix_loongson2f_nop)
+ fix_loongson2f_nop (ip);
- case ',':
- case '(':
- case ')':
- continue;
+ if (mips_fix_loongson2f_jump)
+ fix_loongson2f_jump (ip);
+}
- case '+':
- switch (*fmt++)
- {
- case 'A':
- case 'E':
- INSERT_OPERAND (mips_opts.micromips,
- EXTLSB, insn, va_arg (args, int));
- continue;
+/* IP is a branch that has a delay slot, and we need to fill it
+ automatically. Return true if we can do that by swapping IP
+ with the previous instruction.
+ ADDRESS_EXPR is an operand of the instruction to be used with
+ RELOC_TYPE. */
- case 'B':
- case 'F':
- /* Note that in the macro case, these arguments are already
- in MSB form. (When handling the instruction in the
- non-macro case, these arguments are sizes from which
- MSB values must be calculated.) */
- INSERT_OPERAND (mips_opts.micromips,
- INSMSB, insn, va_arg (args, int));
- continue;
+static bfd_boolean
+can_swap_branch_p (struct mips_cl_insn *ip, expressionS *address_expr,
+ bfd_reloc_code_real_type *reloc_type)
+{
+ unsigned long pinfo, pinfo2, prev_pinfo, prev_pinfo2;
+ unsigned int gpr_read, gpr_write, prev_gpr_read, prev_gpr_write;
+ unsigned int fpr_read, prev_fpr_write;
- case 'J':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, CODE10, insn, va_arg (args, int));
- continue;
+ /* -O2 and above is required for this optimization. */
+ if (mips_optimize < 2)
+ return FALSE;
- case 'C':
- case 'G':
- case 'H':
- /* Note that in the macro case, these arguments are already
- in MSBD form. (When handling the instruction in the
- non-macro case, these arguments are sizes from which
- MSBD values must be calculated.) */
- INSERT_OPERAND (mips_opts.micromips,
- EXTMSBD, insn, va_arg (args, int));
- continue;
+ /* If we have seen .set volatile or .set nomove, don't optimize. */
+ if (mips_opts.nomove)
+ return FALSE;
- case 'Q':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, SEQI, insn, va_arg (args, int));
- continue;
+ /* We can't swap if the previous instruction's position is fixed. */
+ if (history[0].fixed_p)
+ return FALSE;
- case 'j':
- INSERT_OPERAND (mips_opts.micromips, EVAOFFSET, insn, va_arg (args, int));
- continue;
+ /* If the previous previous insn was in a .set noreorder, we can't
+ swap. Actually, the MIPS assembler will swap in this situation.
+ However, gcc configured -with-gnu-as will generate code like
- default:
- abort ();
- }
- continue;
+ .set noreorder
+ lw $4,XXX
+ .set reorder
+ INSN
+ bne $4,$0,foo
- case '2':
- INSERT_OPERAND (mips_opts.micromips, BP, insn, va_arg (args, int));
- continue;
+ in which we can not swap the bne and INSN. If gcc is not configured
+ -with-gnu-as, it does not output the .set pseudo-ops. */
+ if (history[1].noreorder_p)
+ return FALSE;
- case 'n':
- gas_assert (mips_opts.micromips);
- case 't':
- case 'w':
- case 'E':
- INSERT_OPERAND (mips_opts.micromips, RT, insn, va_arg (args, int));
- continue;
+ /* If the previous instruction had a fixup in mips16 mode, we can not swap.
+ This means that the previous instruction was a 4-byte one anyhow. */
+ if (mips_opts.mips16 && history[0].fixp[0])
+ return FALSE;
- case 'c':
- INSERT_OPERAND (mips_opts.micromips, CODE, insn, va_arg (args, int));
- continue;
+ /* If the branch is itself the target of a branch, we can not swap.
+ We cheat on this; all we check for is whether there is a label on
+ this instruction. If there are any branches to anything other than
+ a label, users must use .set noreorder. */
+ if (seg_info (now_seg)->label_list)
+ return FALSE;
- case 'W':
- gas_assert (!mips_opts.micromips);
- case 'T':
- INSERT_OPERAND (mips_opts.micromips, FT, insn, va_arg (args, int));
- continue;
+ /* If the previous instruction is in a variant frag other than this
+ branch's one, we cannot do the swap. This does not apply to
+ MIPS16 code, which uses variant frags for different purposes. */
+ if (!mips_opts.mips16
+ && history[0].frag
+ && history[0].frag->fr_type == rs_machine_dependent)
+ return FALSE;
- case 'G':
- if (mips_opts.micromips)
- INSERT_OPERAND (1, RS, insn, va_arg (args, int));
- else
- INSERT_OPERAND (0, RD, insn, va_arg (args, int));
- continue;
+ /* We do not swap with instructions that cannot architecturally
+ be placed in a branch delay slot, such as SYNC or ERET. We
+ also refrain from swapping with a trap instruction, since it
+ complicates trap handlers to have the trap instruction be in
+ a delay slot. */
+ prev_pinfo = history[0].insn_mo->pinfo;
+ if (prev_pinfo & INSN_NO_DELAY_SLOT)
+ return FALSE;
- case 'K':
- gas_assert (!mips_opts.micromips);
- case 'd':
- INSERT_OPERAND (mips_opts.micromips, RD, insn, va_arg (args, int));
- continue;
+ /* Check for conflicts between the branch and the instructions
+ before the candidate delay slot. */
+ if (nops_for_insn (0, history + 1, ip) > 0)
+ return FALSE;
- case 'U':
- gas_assert (!mips_opts.micromips);
- {
- int tmp = va_arg (args, int);
+ /* Check for conflicts between the swapped sequence and the
+ target of the branch. */
+ if (nops_for_sequence (2, 0, history + 1, ip, history) > 0)
+ return FALSE;
- INSERT_OPERAND (0, RT, insn, tmp);
- INSERT_OPERAND (0, RD, insn, tmp);
- }
- continue;
+ /* If the branch reads a register that the previous
+ instruction sets, we can not swap. */
+ gpr_read = gpr_read_mask (ip);
+ prev_gpr_write = gpr_write_mask (&history[0]);
+ if (gpr_read & prev_gpr_write)
+ return FALSE;
- case 'V':
- case 'S':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, FS, insn, va_arg (args, int));
- continue;
+ fpr_read = fpr_read_mask (ip);
+ prev_fpr_write = fpr_write_mask (&history[0]);
+ if (fpr_read & prev_fpr_write)
+ return FALSE;
- case 'z':
- continue;
+ /* If the branch writes a register that the previous
+ instruction sets, we can not swap. */
+ gpr_write = gpr_write_mask (ip);
+ if (gpr_write & prev_gpr_write)
+ return FALSE;
- case '<':
- INSERT_OPERAND (mips_opts.micromips,
- SHAMT, insn, va_arg (args, int));
- continue;
+ /* If the branch writes a register that the previous
+ instruction reads, we can not swap. */
+ prev_gpr_read = gpr_read_mask (&history[0]);
+ if (gpr_write & prev_gpr_read)
+ return FALSE;
- case 'D':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, FD, insn, va_arg (args, int));
- continue;
+ /* If one instruction sets a condition code and the
+ other one uses a condition code, we can not swap. */
+ pinfo = ip->insn_mo->pinfo;
+ if ((pinfo & INSN_READ_COND_CODE)
+ && (prev_pinfo & INSN_WRITE_COND_CODE))
+ return FALSE;
+ if ((pinfo & INSN_WRITE_COND_CODE)
+ && (prev_pinfo & INSN_READ_COND_CODE))
+ return FALSE;
- case 'B':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, CODE20, insn, va_arg (args, int));
- continue;
+ /* If the previous instruction uses the PC, we can not swap. */
+ prev_pinfo2 = history[0].insn_mo->pinfo2;
+ if (prev_pinfo2 & INSN2_READ_PC)
+ return FALSE;
- case 'J':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, CODE19, insn, va_arg (args, int));
- continue;
+ /* If the previous instruction has an incorrect size for a fixed
+ branch delay slot in microMIPS mode, we cannot swap. */
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (mips_opts.micromips
+ && (pinfo2 & INSN2_BRANCH_DELAY_16BIT)
+ && insn_length (history) != 2)
+ return FALSE;
+ if (mips_opts.micromips
+ && (pinfo2 & INSN2_BRANCH_DELAY_32BIT)
+ && insn_length (history) != 4)
+ return FALSE;
- case 'q':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, CODE2, insn, va_arg (args, int));
- continue;
+ /* On R5900 short loops need to be fixed by inserting a nop in
+ the branch delay slots.
+ A short loop can be terminated too early. */
+ if (mips_opts.arch == CPU_R5900
+ /* Check if instruction has a parameter, ignore "j $31". */
+ && (address_expr != NULL)
+ /* Parameter must be 16 bit. */
+ && (*reloc_type == BFD_RELOC_16_PCREL_S2)
+ /* Branch to same segment. */
+ && (S_GET_SEGMENT(address_expr->X_add_symbol) == now_seg)
+ /* Branch to same code fragment. */
+ && (symbol_get_frag(address_expr->X_add_symbol) == frag_now)
+ /* Can only calculate branch offset if value is known. */
+ && symbol_constant_p(address_expr->X_add_symbol)
+ /* Check if branch is really conditional. */
+ && !((ip->insn_opcode & 0xffff0000) == 0x10000000 /* beq $0,$0 */
+ || (ip->insn_opcode & 0xffff0000) == 0x04010000 /* bgez $0 */
+ || (ip->insn_opcode & 0xffff0000) == 0x04110000)) /* bgezal $0 */
+ {
+ int distance;
+ /* Check if loop is shorter than 6 instructions including
+ branch and delay slot. */
+ distance = frag_now_fix() - S_GET_VALUE(address_expr->X_add_symbol);
+ if (distance <= 20)
+ {
+ int i;
+ int rv;
- case 'b':
- case 's':
- case 'r':
- case 'v':
- INSERT_OPERAND (mips_opts.micromips, RS, insn, va_arg (args, int));
- continue;
+ rv = FALSE;
+ /* When the loop includes branches or jumps,
+ it is not a short loop. */
+ for (i = 0; i < (distance / 4); i++)
+ {
+ if ((history[i].cleared_p)
+ || delayed_branch_p(&history[i]))
+ {
+ rv = TRUE;
+ break;
+ }
+ }
+ if (rv == FALSE)
+ {
+ /* Insert nop after branch to fix short loop. */
+ return FALSE;
+ }
+ }
+ }
- case 'i':
- case 'j':
- macro_read_relocs (&args, r);
- gas_assert (*r == BFD_RELOC_GPREL16
- || *r == BFD_RELOC_MIPS_HIGHER
- || *r == BFD_RELOC_HI16_S
- || *r == BFD_RELOC_LO16
- || *r == BFD_RELOC_MIPS_GOT_OFST);
- continue;
+ return TRUE;
+}
- case 'o':
- macro_read_relocs (&args, r);
- continue;
+/* Decide how we should add IP to the instruction stream.
+ ADDRESS_EXPR is an operand of the instruction to be used with
+ RELOC_TYPE. */
- case 'u':
- macro_read_relocs (&args, r);
- gas_assert (ep != NULL
- && (ep->X_op == O_constant
- || (ep->X_op == O_symbol
- && (*r == BFD_RELOC_MIPS_HIGHEST
- || *r == BFD_RELOC_HI16_S
- || *r == BFD_RELOC_HI16
- || *r == BFD_RELOC_GPREL16
- || *r == BFD_RELOC_MIPS_GOT_HI16
- || *r == BFD_RELOC_MIPS_CALL_HI16))));
- continue;
+static enum append_method
+get_append_method (struct mips_cl_insn *ip, expressionS *address_expr,
+ bfd_reloc_code_real_type *reloc_type)
+{
+ /* The relaxed version of a macro sequence must be inherently
+ hazard-free. */
+ if (mips_relax.sequence == 2)
+ return APPEND_ADD;
- case 'p':
- gas_assert (ep != NULL);
+ /* We must not dabble with instructions in a ".set norerorder" block. */
+ if (mips_opts.noreorder)
+ return APPEND_ADD;
- /*
- * This allows macro() to pass an immediate expression for
- * creating short branches without creating a symbol.
- *
- * We don't allow branch relaxation for these branches, as
- * they should only appear in ".set nomacro" anyway.
- */
- if (ep->X_op == O_constant)
- {
- /* For microMIPS we always use relocations for branches.
- So we should not resolve immediate values. */
- gas_assert (!mips_opts.micromips);
+ /* Otherwise, it's our responsibility to fill branch delay slots. */
+ if (delayed_branch_p (ip))
+ {
+ if (!branch_likely_p (ip)
+ && can_swap_branch_p (ip, address_expr, reloc_type))
+ return APPEND_SWAP;
- if ((ep->X_add_number & 3) != 0)
- as_bad (_("branch to misaligned address (0x%lx)"),
- (unsigned long) ep->X_add_number);
- if ((ep->X_add_number + 0x20000) & ~0x3ffff)
- as_bad (_("branch address range overflow (0x%lx)"),
- (unsigned long) ep->X_add_number);
- insn.insn_opcode |= (ep->X_add_number >> 2) & 0xffff;
- ep = NULL;
- }
- else
- *r = BFD_RELOC_16_PCREL_S2;
- continue;
+ if (mips_opts.mips16
+ && ISA_SUPPORTS_MIPS16E
+ && gpr_read_mask (ip) != 0)
+ return APPEND_ADD_COMPACT;
- case 'a':
- gas_assert (ep != NULL);
- *r = BFD_RELOC_MIPS_JMP;
- continue;
+ return APPEND_ADD_WITH_NOP;
+ }
- case 'C':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, COPZ, insn, va_arg (args, unsigned long));
- continue;
+ return APPEND_ADD;
+}
- case 'k':
- INSERT_OPERAND (mips_opts.micromips,
- CACHE, insn, va_arg (args, unsigned long));
- continue;
+/* IP is a MIPS16 instruction whose opcode we have just changed.
+ Point IP->insn_mo to the new opcode's definition. */
- case '|':
- gas_assert (mips_opts.micromips);
- INSERT_OPERAND (1, TRAP, insn, va_arg (args, int));
- continue;
-
- case '.':
- gas_assert (mips_opts.micromips);
- INSERT_OPERAND (1, OFFSET10, insn, va_arg (args, int));
- continue;
-
- case '\\':
- INSERT_OPERAND (mips_opts.micromips,
- 3BITPOS, insn, va_arg (args, unsigned int));
- continue;
+static void
+find_altered_mips16_opcode (struct mips_cl_insn *ip)
+{
+ const struct mips_opcode *mo, *end;
- case '~':
- INSERT_OPERAND (mips_opts.micromips,
- OFFSET12, insn, va_arg (args, unsigned long));
- continue;
+ end = &mips16_opcodes[bfd_mips16_num_opcodes];
+ for (mo = ip->insn_mo; mo < end; mo++)
+ if ((ip->insn_opcode & mo->mask) == mo->match)
+ {
+ ip->insn_mo = mo;
+ return;
+ }
+ abort ();
+}
- case 'N':
- gas_assert (mips_opts.micromips);
- INSERT_OPERAND (1, BCC, insn, va_arg (args, int));
- continue;
+/* For microMIPS macros, we need to generate a local number label
+ as the target of branches. */
+#define MICROMIPS_LABEL_CHAR '\037'
+static unsigned long micromips_target_label;
+static char micromips_target_name[32];
- case 'm': /* Opcode extension character. */
- gas_assert (mips_opts.micromips);
- switch (*fmt++)
- {
- case 'j':
- INSERT_OPERAND (1, MJ, insn, va_arg (args, int));
- break;
+static char *
+micromips_label_name (void)
+{
+ char *p = micromips_target_name;
+ char symbol_name_temporary[24];
+ unsigned long l;
+ int i;
- case 'p':
- INSERT_OPERAND (1, MP, insn, va_arg (args, int));
- break;
+ if (*p)
+ return p;
- case 'F':
- INSERT_OPERAND (1, IMMF, insn, va_arg (args, int));
- break;
+ i = 0;
+ l = micromips_target_label;
+#ifdef LOCAL_LABEL_PREFIX
+ *p++ = LOCAL_LABEL_PREFIX;
+#endif
+ *p++ = 'L';
+ *p++ = MICROMIPS_LABEL_CHAR;
+ do
+ {
+ symbol_name_temporary[i++] = l % 10 + '0';
+ l /= 10;
+ }
+ while (l != 0);
+ while (i > 0)
+ *p++ = symbol_name_temporary[--i];
+ *p = '\0';
- default:
- abort ();
- }
- continue;
+ return micromips_target_name;
+}
- default:
- abort ();
- }
- break;
- }
- va_end (args);
- gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
+static void
+micromips_label_expr (expressionS *label_expr)
+{
+ label_expr->X_op = O_symbol;
+ label_expr->X_add_symbol = symbol_find_or_make (micromips_label_name ());
+ label_expr->X_add_number = 0;
+}
- append_insn (&insn, ep, r, TRUE);
+static void
+micromips_label_inc (void)
+{
+ micromips_target_label++;
+ *micromips_target_name = '\0';
}
static void
-mips16_macro_build (expressionS *ep, const char *name, const char *fmt,
- va_list *args)
+micromips_add_label (void)
{
- struct mips_opcode *mo;
- struct mips_cl_insn insn;
- bfd_reloc_code_real_type r[3]
- = {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
+ symbolS *s;
- mo = (struct mips_opcode *) hash_find (mips16_op_hash, name);
- gas_assert (mo);
- gas_assert (strcmp (name, mo->name) == 0);
+ s = colon (micromips_label_name ());
+ micromips_label_inc ();
+ S_SET_OTHER (s, ELF_ST_SET_MICROMIPS (S_GET_OTHER (s)));
+}
- while (strcmp (fmt, mo->args) != 0 || mo->pinfo == INSN_MACRO)
+/* If assembling microMIPS code, then return the microMIPS reloc
+ corresponding to the requested one if any. Otherwise return
+ the reloc unchanged. */
+
+static bfd_reloc_code_real_type
+micromips_map_reloc (bfd_reloc_code_real_type reloc)
+{
+ static const bfd_reloc_code_real_type relocs[][2] =
{
- ++mo;
- gas_assert (mo->name);
- gas_assert (strcmp (name, mo->name) == 0);
- }
+ /* Keep sorted incrementally by the left-hand key. */
+ { BFD_RELOC_16_PCREL_S2, BFD_RELOC_MICROMIPS_16_PCREL_S1 },
+ { BFD_RELOC_GPREL16, BFD_RELOC_MICROMIPS_GPREL16 },
+ { BFD_RELOC_MIPS_JMP, BFD_RELOC_MICROMIPS_JMP },
+ { BFD_RELOC_HI16, BFD_RELOC_MICROMIPS_HI16 },
+ { BFD_RELOC_HI16_S, BFD_RELOC_MICROMIPS_HI16_S },
+ { BFD_RELOC_LO16, BFD_RELOC_MICROMIPS_LO16 },
+ { BFD_RELOC_MIPS_LITERAL, BFD_RELOC_MICROMIPS_LITERAL },
+ { BFD_RELOC_MIPS_GOT16, BFD_RELOC_MICROMIPS_GOT16 },
+ { BFD_RELOC_MIPS_CALL16, BFD_RELOC_MICROMIPS_CALL16 },
+ { BFD_RELOC_MIPS_GOT_HI16, BFD_RELOC_MICROMIPS_GOT_HI16 },
+ { BFD_RELOC_MIPS_GOT_LO16, BFD_RELOC_MICROMIPS_GOT_LO16 },
+ { BFD_RELOC_MIPS_CALL_HI16, BFD_RELOC_MICROMIPS_CALL_HI16 },
+ { BFD_RELOC_MIPS_CALL_LO16, BFD_RELOC_MICROMIPS_CALL_LO16 },
+ { BFD_RELOC_MIPS_SUB, BFD_RELOC_MICROMIPS_SUB },
+ { BFD_RELOC_MIPS_GOT_PAGE, BFD_RELOC_MICROMIPS_GOT_PAGE },
+ { BFD_RELOC_MIPS_GOT_OFST, BFD_RELOC_MICROMIPS_GOT_OFST },
+ { BFD_RELOC_MIPS_GOT_DISP, BFD_RELOC_MICROMIPS_GOT_DISP },
+ { BFD_RELOC_MIPS_HIGHEST, BFD_RELOC_MICROMIPS_HIGHEST },
+ { BFD_RELOC_MIPS_HIGHER, BFD_RELOC_MICROMIPS_HIGHER },
+ { BFD_RELOC_MIPS_SCN_DISP, BFD_RELOC_MICROMIPS_SCN_DISP },
+ { BFD_RELOC_MIPS_TLS_GD, BFD_RELOC_MICROMIPS_TLS_GD },
+ { BFD_RELOC_MIPS_TLS_LDM, BFD_RELOC_MICROMIPS_TLS_LDM },
+ { BFD_RELOC_MIPS_TLS_DTPREL_HI16, BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16 },
+ { BFD_RELOC_MIPS_TLS_DTPREL_LO16, BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16 },
+ { BFD_RELOC_MIPS_TLS_GOTTPREL, BFD_RELOC_MICROMIPS_TLS_GOTTPREL },
+ { BFD_RELOC_MIPS_TLS_TPREL_HI16, BFD_RELOC_MICROMIPS_TLS_TPREL_HI16 },
+ { BFD_RELOC_MIPS_TLS_TPREL_LO16, BFD_RELOC_MICROMIPS_TLS_TPREL_LO16 }
+ };
+ bfd_reloc_code_real_type r;
+ size_t i;
- create_insn (&insn, mo);
- for (;;)
+ if (!mips_opts.micromips)
+ return reloc;
+ for (i = 0; i < ARRAY_SIZE (relocs); i++)
{
- int c;
+ r = relocs[i][0];
+ if (r > reloc)
+ return reloc;
+ if (r == reloc)
+ return relocs[i][1];
+ }
+ return reloc;
+}
- c = *fmt++;
- switch (c)
- {
- case '\0':
- break;
+/* Try to resolve relocation RELOC against constant OPERAND at assembly time.
+ Return true on success, storing the resolved value in RESULT. */
- case ',':
- case '(':
- case ')':
- continue;
+static bfd_boolean
+calculate_reloc (bfd_reloc_code_real_type reloc, offsetT operand,
+ offsetT *result)
+{
+ switch (reloc)
+ {
+ case BFD_RELOC_MIPS_HIGHEST:
+ case BFD_RELOC_MICROMIPS_HIGHEST:
+ *result = ((operand + 0x800080008000ull) >> 48) & 0xffff;
+ return TRUE;
- case 'y':
- case 'w':
- MIPS16_INSERT_OPERAND (RY, insn, va_arg (*args, int));
- continue;
+ case BFD_RELOC_MIPS_HIGHER:
+ case BFD_RELOC_MICROMIPS_HIGHER:
+ *result = ((operand + 0x80008000ull) >> 32) & 0xffff;
+ return TRUE;
- case 'x':
- case 'v':
- MIPS16_INSERT_OPERAND (RX, insn, va_arg (*args, int));
- continue;
+ case BFD_RELOC_HI16_S:
+ case BFD_RELOC_MICROMIPS_HI16_S:
+ case BFD_RELOC_MIPS16_HI16_S:
+ *result = ((operand + 0x8000) >> 16) & 0xffff;
+ return TRUE;
- case 'z':
- MIPS16_INSERT_OPERAND (RZ, insn, va_arg (*args, int));
- continue;
+ case BFD_RELOC_HI16:
+ case BFD_RELOC_MICROMIPS_HI16:
+ case BFD_RELOC_MIPS16_HI16:
+ *result = (operand >> 16) & 0xffff;
+ return TRUE;
- case 'Z':
- MIPS16_INSERT_OPERAND (MOVE32Z, insn, va_arg (*args, int));
- continue;
+ case BFD_RELOC_LO16:
+ case BFD_RELOC_MICROMIPS_LO16:
+ case BFD_RELOC_MIPS16_LO16:
+ *result = operand & 0xffff;
+ return TRUE;
- case '0':
- case 'S':
- case 'P':
- case 'R':
- continue;
+ case BFD_RELOC_UNUSED:
+ *result = operand;
+ return TRUE;
- case 'X':
- MIPS16_INSERT_OPERAND (REGR32, insn, va_arg (*args, int));
- continue;
+ default:
+ return FALSE;
+ }
+}
- case 'Y':
- {
- int regno;
+/* Output an instruction. IP is the instruction information.
+ ADDRESS_EXPR is an operand of the instruction to be used with
+ RELOC_TYPE. EXPANSIONP is true if the instruction is part of
+ a macro expansion. */
- regno = va_arg (*args, int);
- regno = ((regno & 7) << 2) | ((regno & 0x18) >> 3);
- MIPS16_INSERT_OPERAND (REG32R, insn, regno);
- }
- continue;
+static void
+append_insn (struct mips_cl_insn *ip, expressionS *address_expr,
+ bfd_reloc_code_real_type *reloc_type, bfd_boolean expansionp)
+{
+ unsigned long prev_pinfo2, pinfo;
+ bfd_boolean relaxed_branch = FALSE;
+ enum append_method method;
+ bfd_boolean relax32;
+ int branch_disp;
- case '<':
- case '>':
- case '4':
- case '5':
- case 'H':
- case 'W':
- case 'D':
- case 'j':
- case '8':
- case 'V':
- case 'C':
- case 'U':
- case 'k':
- case 'K':
- case 'p':
- case 'q':
- {
- offsetT value;
+ if (mips_fix_loongson2f && !HAVE_CODE_COMPRESSION)
+ fix_loongson2f (ip);
- gas_assert (ep != NULL);
+ file_ase_mips16 |= mips_opts.mips16;
+ file_ase_micromips |= mips_opts.micromips;
- if (ep->X_op != O_constant)
- *r = (int) BFD_RELOC_UNUSED + c;
- else if (calculate_reloc (*r, ep->X_add_number, &value))
- {
- mips16_immed (NULL, 0, c, *r, value, 0, &insn.insn_opcode);
- ep = NULL;
- *r = BFD_RELOC_UNUSED;
- }
- }
- continue;
+ prev_pinfo2 = history[0].insn_mo->pinfo2;
+ pinfo = ip->insn_mo->pinfo;
- case '6':
- MIPS16_INSERT_OPERAND (IMM6, insn, va_arg (*args, int));
- continue;
- }
+ if (mips_opts.micromips
+ && !expansionp
+ && (((prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0
+ && micromips_insn_length (ip->insn_mo) != 2)
+ || ((prev_pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
+ && micromips_insn_length (ip->insn_mo) != 4)))
+ as_warn (_("wrong size instruction in a %u-bit branch delay slot"),
+ (prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 ? 16 : 32);
- break;
- }
+ if (address_expr == NULL)
+ ip->complete_p = 1;
+ else if (reloc_type[0] <= BFD_RELOC_UNUSED
+ && reloc_type[1] == BFD_RELOC_UNUSED
+ && reloc_type[2] == BFD_RELOC_UNUSED
+ && address_expr->X_op == O_constant)
+ {
+ switch (*reloc_type)
+ {
+ case BFD_RELOC_MIPS_JMP:
+ {
+ int shift;
- gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
+ shift = mips_opts.micromips ? 1 : 2;
+ if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
+ as_bad (_("jump to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= ((address_expr->X_add_number >> shift)
+ & 0x3ffffff);
+ ip->complete_p = 1;
+ }
+ break;
- append_insn (&insn, ep, r, TRUE);
-}
+ case BFD_RELOC_MIPS16_JMP:
+ if ((address_expr->X_add_number & 3) != 0)
+ as_bad (_("jump to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |=
+ (((address_expr->X_add_number & 0x7c0000) << 3)
+ | ((address_expr->X_add_number & 0xf800000) >> 7)
+ | ((address_expr->X_add_number & 0x3fffc) >> 2));
+ ip->complete_p = 1;
+ break;
-/*
- * Sign-extend 32-bit mode constants that have bit 31 set and all
- * higher bits unset.
- */
-static void
-normalize_constant_expr (expressionS *ex)
-{
- if (ex->X_op == O_constant
- && IS_ZEXT_32BIT_NUM (ex->X_add_number))
- ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
- - 0x80000000);
-}
+ case BFD_RELOC_16_PCREL_S2:
+ {
+ int shift;
-/*
- * Sign-extend 32-bit mode address offsets that have bit 31 set and
- * all higher bits unset.
- */
-static void
-normalize_address_expr (expressionS *ex)
-{
- if (((ex->X_op == O_constant && HAVE_32BIT_ADDRESSES)
- || (ex->X_op == O_symbol && HAVE_32BIT_SYMBOLS))
- && IS_ZEXT_32BIT_NUM (ex->X_add_number))
- ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
- - 0x80000000);
-}
+ shift = mips_opts.micromips ? 1 : 2;
+ if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
+ as_bad (_("branch to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ if (!mips_relax_branch)
+ {
+ if ((address_expr->X_add_number + (1 << (shift + 15)))
+ & ~((1 << (shift + 16)) - 1))
+ as_bad (_("branch address range overflow (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= ((address_expr->X_add_number >> shift)
+ & 0xffff);
+ }
+ }
+ break;
-/*
- * Generate a "jalr" instruction with a relocation hint to the called
- * function. This occurs in NewABI PIC code.
- */
-static void
-macro_build_jalr (expressionS *ep, int cprestore)
-{
- static const bfd_reloc_code_real_type jalr_relocs[2]
- = { BFD_RELOC_MIPS_JALR, BFD_RELOC_MICROMIPS_JALR };
- bfd_reloc_code_real_type jalr_reloc = jalr_relocs[mips_opts.micromips];
- const char *jalr;
- char *f = NULL;
+ default:
+ {
+ offsetT value;
- if (MIPS_JALR_HINT_P (ep))
- {
- frag_grow (8);
- f = frag_more (0);
- }
- if (mips_opts.micromips)
- {
- jalr = ((mips_opts.noreorder && !cprestore) || mips_opts.insn32
- ? "jalr" : "jalrs");
- if (MIPS_JALR_HINT_P (ep)
- || mips_opts.insn32
- || (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
- macro_build (NULL, jalr, "t,s", RA, PIC_CALL_REG);
- else
- macro_build (NULL, jalr, "mj", PIC_CALL_REG);
+ if (calculate_reloc (*reloc_type, address_expr->X_add_number,
+ &value))
+ {
+ ip->insn_opcode |= value & 0xffff;
+ ip->complete_p = 1;
+ }
+ }
+ break;
+ }
}
- else
- macro_build (NULL, "jalr", "d,s", RA, PIC_CALL_REG);
- if (MIPS_JALR_HINT_P (ep))
- fix_new_exp (frag_now, f - frag_now->fr_literal, 4, ep, FALSE, jalr_reloc);
-}
-
-/*
- * Generate a "lui" instruction.
- */
-static void
-macro_build_lui (expressionS *ep, int regnum)
-{
- gas_assert (! mips_opts.mips16);
- if (ep->X_op != O_constant)
+ if (mips_relax.sequence != 2 && !mips_opts.noreorder)
{
- gas_assert (ep->X_op == O_symbol);
- /* _gp_disp is a special case, used from s_cpload.
- __gnu_local_gp is used if mips_no_shared. */
- gas_assert (mips_pic == NO_PIC
- || (! HAVE_NEWABI
- && strcmp (S_GET_NAME (ep->X_add_symbol), "_gp_disp") == 0)
- || (! mips_in_shared
- && strcmp (S_GET_NAME (ep->X_add_symbol),
- "__gnu_local_gp") == 0));
- }
-
- macro_build (ep, "lui", LUI_FMT, regnum, BFD_RELOC_HI16_S);
-}
+ /* There are a lot of optimizations we could do that we don't.
+ In particular, we do not, in general, reorder instructions.
+ If you use gcc with optimization, it will reorder
+ instructions and generally do much more optimization then we
+ do here; repeating all that work in the assembler would only
+ benefit hand written assembly code, and does not seem worth
+ it. */
+ int nops = (mips_optimize == 0
+ ? nops_for_insn (0, history, NULL)
+ : nops_for_insn_or_target (0, history, ip));
+ if (nops > 0)
+ {
+ fragS *old_frag;
+ unsigned long old_frag_offset;
+ int i;
-/* Generate a sequence of instructions to do a load or store from a constant
- offset off of a base register (breg) into/from a target register (treg),
- using AT if necessary. */
-static void
-macro_build_ldst_constoffset (expressionS *ep, const char *op,
- int treg, int breg, int dbl)
-{
- gas_assert (ep->X_op == O_constant);
+ old_frag = frag_now;
+ old_frag_offset = frag_now_fix ();
- /* Sign-extending 32-bit constants makes their handling easier. */
- if (!dbl)
- normalize_constant_expr (ep);
+ for (i = 0; i < nops; i++)
+ add_fixed_insn (NOP_INSN);
+ insert_into_history (0, nops, NOP_INSN);
- /* Right now, this routine can only handle signed 32-bit constants. */
- if (! IS_SEXT_32BIT_NUM(ep->X_add_number + 0x8000))
- as_warn (_("operand overflow"));
+ if (listing)
+ {
+ listing_prev_line ();
+ /* We may be at the start of a variant frag. In case we
+ are, make sure there is enough space for the frag
+ after the frags created by listing_prev_line. The
+ argument to frag_grow here must be at least as large
+ as the argument to all other calls to frag_grow in
+ this file. We don't have to worry about being in the
+ middle of a variant frag, because the variants insert
+ all needed nop instructions themselves. */
+ frag_grow (40);
+ }
- if (IS_SEXT_16BIT_NUM(ep->X_add_number))
- {
- /* Signed 16-bit offset will fit in the op. Easy! */
- macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, breg);
- }
- else
- {
- /* 32-bit offset, need multiple instructions and AT, like:
- lui $tempreg,const_hi (BFD_RELOC_HI16_S)
- addu $tempreg,$tempreg,$breg
- <op> $treg,const_lo($tempreg) (BFD_RELOC_LO16)
- to handle the complete offset. */
- macro_build_lui (ep, AT);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, AT, breg);
- macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, AT);
+ mips_move_text_labels ();
- if (!mips_opts.at)
- as_bad (_("Macro used $at after \".set noat\""));
+#ifndef NO_ECOFF_DEBUGGING
+ if (ECOFF_DEBUGGING)
+ ecoff_fix_loc (old_frag, old_frag_offset);
+#endif
+ }
}
-}
-
-/* set_at()
- * Generates code to set the $at register to true (one)
- * if reg is less than the immediate expression.
- */
-static void
-set_at (int reg, int unsignedp)
-{
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
- && imm_expr.X_add_number < 0x8000)
- macro_build (&imm_expr, unsignedp ? "sltiu" : "slti", "t,r,j",
- AT, reg, BFD_RELOC_LO16);
- else
+ else if (mips_relax.sequence != 2 && prev_nop_frag != NULL)
{
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, unsignedp ? "sltu" : "slt", "d,v,t", AT, reg, AT);
- }
-}
-
-/* Warn if an expression is not a constant. */
+ int nops;
-static void
-check_absolute_expr (struct mips_cl_insn *ip, expressionS *ex)
-{
- if (ex->X_op == O_big)
- as_bad (_("unsupported large constant"));
- else if (ex->X_op != O_constant)
- as_bad (_("Instruction %s requires absolute expression"),
- ip->insn_mo->name);
+ /* Work out how many nops in prev_nop_frag are needed by IP,
+ ignoring hazards generated by the first prev_nop_frag_since
+ instructions. */
+ nops = nops_for_insn_or_target (prev_nop_frag_since, history, ip);
+ gas_assert (nops <= prev_nop_frag_holds);
- if (HAVE_32BIT_GPRS)
- normalize_constant_expr (ex);
-}
+ /* Enforce NOPS as a minimum. */
+ if (nops > prev_nop_frag_required)
+ prev_nop_frag_required = nops;
-/* Count the leading zeroes by performing a binary chop. This is a
- bulky bit of source, but performance is a LOT better for the
- majority of values than a simple loop to count the bits:
- for (lcnt = 0; (lcnt < 32); lcnt++)
- if ((v) & (1 << (31 - lcnt)))
- break;
- However it is not code size friendly, and the gain will drop a bit
- on certain cached systems.
-*/
-#define COUNT_TOP_ZEROES(v) \
- (((v) & ~0xffff) == 0 \
- ? ((v) & ~0xff) == 0 \
- ? ((v) & ~0xf) == 0 \
- ? ((v) & ~0x3) == 0 \
- ? ((v) & ~0x1) == 0 \
- ? !(v) \
- ? 32 \
- : 31 \
- : 30 \
- : ((v) & ~0x7) == 0 \
- ? 29 \
- : 28 \
- : ((v) & ~0x3f) == 0 \
- ? ((v) & ~0x1f) == 0 \
- ? 27 \
- : 26 \
- : ((v) & ~0x7f) == 0 \
- ? 25 \
- : 24 \
- : ((v) & ~0xfff) == 0 \
- ? ((v) & ~0x3ff) == 0 \
- ? ((v) & ~0x1ff) == 0 \
- ? 23 \
- : 22 \
- : ((v) & ~0x7ff) == 0 \
- ? 21 \
- : 20 \
- : ((v) & ~0x3fff) == 0 \
- ? ((v) & ~0x1fff) == 0 \
- ? 19 \
- : 18 \
- : ((v) & ~0x7fff) == 0 \
- ? 17 \
- : 16 \
- : ((v) & ~0xffffff) == 0 \
- ? ((v) & ~0xfffff) == 0 \
- ? ((v) & ~0x3ffff) == 0 \
- ? ((v) & ~0x1ffff) == 0 \
- ? 15 \
- : 14 \
- : ((v) & ~0x7ffff) == 0 \
- ? 13 \
- : 12 \
- : ((v) & ~0x3fffff) == 0 \
- ? ((v) & ~0x1fffff) == 0 \
- ? 11 \
- : 10 \
- : ((v) & ~0x7fffff) == 0 \
- ? 9 \
- : 8 \
- : ((v) & ~0xfffffff) == 0 \
- ? ((v) & ~0x3ffffff) == 0 \
- ? ((v) & ~0x1ffffff) == 0 \
- ? 7 \
- : 6 \
- : ((v) & ~0x7ffffff) == 0 \
- ? 5 \
- : 4 \
- : ((v) & ~0x3fffffff) == 0 \
- ? ((v) & ~0x1fffffff) == 0 \
- ? 3 \
- : 2 \
- : ((v) & ~0x7fffffff) == 0 \
- ? 1 \
- : 0)
-
-/* load_register()
- * This routine generates the least number of instructions necessary to load
- * an absolute expression value into a register.
- */
-static void
-load_register (int reg, expressionS *ep, int dbl)
-{
- int freg;
- expressionS hi32, lo32;
-
- if (ep->X_op != O_big)
- {
- gas_assert (ep->X_op == O_constant);
-
- /* Sign-extending 32-bit constants makes their handling easier. */
- if (!dbl)
- normalize_constant_expr (ep);
-
- if (IS_SEXT_16BIT_NUM (ep->X_add_number))
- {
- /* We can handle 16 bit signed values with an addiu to
- $zero. No need to ever use daddiu here, since $zero and
- the result are always correct in 32 bit mode. */
- macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
- return;
- }
- else if (ep->X_add_number >= 0 && ep->X_add_number < 0x10000)
+ if (prev_nop_frag_holds == prev_nop_frag_required)
{
- /* We can handle 16 bit unsigned values with an ori to
- $zero. */
- macro_build (ep, "ori", "t,r,i", reg, 0, BFD_RELOC_LO16);
- return;
+ /* Settle for the current number of nops. Update the history
+ accordingly (for the benefit of any future .set reorder code). */
+ prev_nop_frag = NULL;
+ insert_into_history (prev_nop_frag_since,
+ prev_nop_frag_holds, NOP_INSN);
}
- else if ((IS_SEXT_32BIT_NUM (ep->X_add_number)))
+ else
{
- /* 32 bit values require an lui. */
- macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
- if ((ep->X_add_number & 0xffff) != 0)
- macro_build (ep, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16);
- return;
+ /* Allow this instruction to replace one of the nops that was
+ tentatively added to prev_nop_frag. */
+ prev_nop_frag->fr_fix -= NOP_INSN_SIZE;
+ prev_nop_frag_holds--;
+ prev_nop_frag_since++;
}
}
- /* The value is larger than 32 bits. */
+ method = get_append_method (ip, address_expr, reloc_type);
+ branch_disp = method == APPEND_SWAP ? insn_length (history) : 0;
- if (!dbl || HAVE_32BIT_GPRS)
- {
- char value[32];
+ dwarf2_emit_insn (0);
+ /* We want MIPS16 and microMIPS debug info to use ISA-encoded addresses,
+ so "move" the instruction address accordingly.
- sprintf_vma (value, ep->X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
- macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
- return;
+ Also, it doesn't seem appropriate for the assembler to reorder .loc
+ entries. If this instruction is a branch that we are going to swap
+ with the previous instruction, the two instructions should be
+ treated as a unit, and the debug information for both instructions
+ should refer to the start of the branch sequence. Using the
+ current position is certainly wrong when swapping a 32-bit branch
+ and a 16-bit delay slot, since the current position would then be
+ in the middle of a branch. */
+ dwarf2_move_insn ((HAVE_CODE_COMPRESSION ? 1 : 0) - branch_disp);
+
+ relax32 = (mips_relax_branch
+ /* Don't try branch relaxation within .set nomacro, or within
+ .set noat if we use $at for PIC computations. If it turns
+ out that the branch was out-of-range, we'll get an error. */
+ && !mips_opts.warn_about_macros
+ && (mips_opts.at || mips_pic == NO_PIC)
+ /* Don't relax BPOSGE32/64 or BC1ANY2T/F and BC1ANY4T/F
+ as they have no complementing branches. */
+ && !(ip->insn_mo->ase & (ASE_MIPS3D | ASE_DSP64 | ASE_DSP)));
+
+ if (!HAVE_CODE_COMPRESSION
+ && address_expr
+ && relax32
+ && *reloc_type == BFD_RELOC_16_PCREL_S2
+ && delayed_branch_p (ip))
+ {
+ relaxed_branch = TRUE;
+ add_relaxed_insn (ip, (relaxed_branch_length
+ (NULL, NULL,
+ uncond_branch_p (ip) ? -1
+ : branch_likely_p (ip) ? 1
+ : 0)), 4,
+ RELAX_BRANCH_ENCODE
+ (AT,
+ uncond_branch_p (ip),
+ branch_likely_p (ip),
+ pinfo & INSN_WRITE_GPR_31,
+ 0),
+ address_expr->X_add_symbol,
+ address_expr->X_add_number);
+ *reloc_type = BFD_RELOC_UNUSED;
}
+ else if (mips_opts.micromips
+ && address_expr
+ && ((relax32 && *reloc_type == BFD_RELOC_16_PCREL_S2)
+ || *reloc_type > BFD_RELOC_UNUSED)
+ && (delayed_branch_p (ip) || compact_branch_p (ip))
+ /* Don't try branch relaxation when users specify
+ 16-bit/32-bit instructions. */
+ && !forced_insn_length)
+ {
+ bfd_boolean relax16 = *reloc_type > BFD_RELOC_UNUSED;
+ int type = relax16 ? *reloc_type - BFD_RELOC_UNUSED : 0;
+ int uncond = uncond_branch_p (ip) ? -1 : 0;
+ int compact = compact_branch_p (ip);
+ int al = pinfo & INSN_WRITE_GPR_31;
+ int length32;
- if (ep->X_op != O_big)
+ gas_assert (address_expr != NULL);
+ gas_assert (!mips_relax.sequence);
+
+ relaxed_branch = TRUE;
+ length32 = relaxed_micromips_32bit_branch_length (NULL, NULL, uncond);
+ add_relaxed_insn (ip, relax32 ? length32 : 4, relax16 ? 2 : 4,
+ RELAX_MICROMIPS_ENCODE (type, AT, uncond, compact, al,
+ relax32, 0, 0),
+ address_expr->X_add_symbol,
+ address_expr->X_add_number);
+ *reloc_type = BFD_RELOC_UNUSED;
+ }
+ else if (mips_opts.mips16 && *reloc_type > BFD_RELOC_UNUSED)
{
- hi32 = *ep;
- hi32.X_add_number = (valueT) hi32.X_add_number >> 16;
- hi32.X_add_number = (valueT) hi32.X_add_number >> 16;
- hi32.X_add_number &= 0xffffffff;
- lo32 = *ep;
- lo32.X_add_number &= 0xffffffff;
+ /* We need to set up a variant frag. */
+ gas_assert (address_expr != NULL);
+ add_relaxed_insn (ip, 4, 0,
+ RELAX_MIPS16_ENCODE
+ (*reloc_type - BFD_RELOC_UNUSED,
+ forced_insn_length == 2, forced_insn_length == 4,
+ delayed_branch_p (&history[0]),
+ history[0].mips16_absolute_jump_p),
+ make_expr_symbol (address_expr), 0);
}
- else
+ else if (mips_opts.mips16 && insn_length (ip) == 2)
{
- gas_assert (ep->X_add_number > 2);
- if (ep->X_add_number == 3)
- generic_bignum[3] = 0;
- else if (ep->X_add_number > 4)
- as_bad (_("Number larger than 64 bits"));
- lo32.X_op = O_constant;
- lo32.X_add_number = generic_bignum[0] + (generic_bignum[1] << 16);
- hi32.X_op = O_constant;
- hi32.X_add_number = generic_bignum[2] + (generic_bignum[3] << 16);
+ if (!delayed_branch_p (ip))
+ /* Make sure there is enough room to swap this instruction with
+ a following jump instruction. */
+ frag_grow (6);
+ add_fixed_insn (ip);
}
-
- if (hi32.X_add_number == 0)
- freg = 0;
else
{
- int shift, bit;
- unsigned long hi, lo;
+ if (mips_opts.mips16
+ && mips_opts.noreorder
+ && delayed_branch_p (&history[0]))
+ as_warn (_("extended instruction in delay slot"));
- if (hi32.X_add_number == (offsetT) 0xffffffff)
+ if (mips_relax.sequence)
{
- if ((lo32.X_add_number & 0xffff8000) == 0xffff8000)
- {
- macro_build (&lo32, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
- return;
- }
- if (lo32.X_add_number & 0x80000000)
- {
- macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
- if (lo32.X_add_number & 0xffff)
- macro_build (&lo32, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16);
- return;
- }
- }
-
- /* Check for 16bit shifted constant. We know that hi32 is
- non-zero, so start the mask on the first bit of the hi32
- value. */
- shift = 17;
- do
- {
- unsigned long himask, lomask;
-
- if (shift < 32)
- {
- himask = 0xffff >> (32 - shift);
- lomask = (0xffff << shift) & 0xffffffff;
- }
- else
- {
- himask = 0xffff << (shift - 32);
- lomask = 0;
- }
- if ((hi32.X_add_number & ~(offsetT) himask) == 0
- && (lo32.X_add_number & ~(offsetT) lomask) == 0)
- {
- expressionS tmp;
-
- tmp.X_op = O_constant;
- if (shift < 32)
- tmp.X_add_number = ((hi32.X_add_number << (32 - shift))
- | (lo32.X_add_number >> shift));
- else
- tmp.X_add_number = hi32.X_add_number >> (shift - 32);
- macro_build (&tmp, "ori", "t,r,i", reg, 0, BFD_RELOC_LO16);
- macro_build (NULL, (shift >= 32) ? "dsll32" : "dsll", SHFT_FMT,
- reg, reg, (shift >= 32) ? shift - 32 : shift);
- return;
- }
- ++shift;
+ /* If we've reached the end of this frag, turn it into a variant
+ frag and record the information for the instructions we've
+ written so far. */
+ if (frag_room () < 4)
+ relax_close_frag ();
+ mips_relax.sizes[mips_relax.sequence - 1] += insn_length (ip);
}
- while (shift <= (64 - 16));
- /* Find the bit number of the lowest one bit, and store the
- shifted value in hi/lo. */
- hi = (unsigned long) (hi32.X_add_number & 0xffffffff);
- lo = (unsigned long) (lo32.X_add_number & 0xffffffff);
- if (lo != 0)
- {
- bit = 0;
- while ((lo & 1) == 0)
- {
- lo >>= 1;
- ++bit;
- }
- lo |= (hi & (((unsigned long) 1 << bit) - 1)) << (32 - bit);
- hi >>= bit;
- }
- else
+ if (mips_relax.sequence != 2)
{
- bit = 32;
- while ((hi & 1) == 0)
- {
- hi >>= 1;
- ++bit;
- }
- lo = hi;
- hi = 0;
+ if (mips_macro_warning.first_insn_sizes[0] == 0)
+ mips_macro_warning.first_insn_sizes[0] = insn_length (ip);
+ mips_macro_warning.sizes[0] += insn_length (ip);
+ mips_macro_warning.insns[0]++;
}
-
- /* Optimize if the shifted value is a (power of 2) - 1. */
- if ((hi == 0 && ((lo + 1) & lo) == 0)
- || (lo == 0xffffffff && ((hi + 1) & hi) == 0))
+ if (mips_relax.sequence != 1)
{
- shift = COUNT_TOP_ZEROES ((unsigned int) hi32.X_add_number);
- if (shift != 0)
- {
- expressionS tmp;
-
- /* This instruction will set the register to be all
- ones. */
- tmp.X_op = O_constant;
- tmp.X_add_number = (offsetT) -1;
- macro_build (&tmp, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
- if (bit != 0)
- {
- bit += shift;
- macro_build (NULL, (bit >= 32) ? "dsll32" : "dsll", SHFT_FMT,
- reg, reg, (bit >= 32) ? bit - 32 : bit);
- }
- macro_build (NULL, (shift >= 32) ? "dsrl32" : "dsrl", SHFT_FMT,
- reg, reg, (shift >= 32) ? shift - 32 : shift);
- return;
- }
+ if (mips_macro_warning.first_insn_sizes[1] == 0)
+ mips_macro_warning.first_insn_sizes[1] = insn_length (ip);
+ mips_macro_warning.sizes[1] += insn_length (ip);
+ mips_macro_warning.insns[1]++;
}
- /* Sign extend hi32 before calling load_register, because we can
- generally get better code when we load a sign extended value. */
- if ((hi32.X_add_number & 0x80000000) != 0)
- hi32.X_add_number |= ~(offsetT) 0xffffffff;
- load_register (reg, &hi32, 0);
- freg = reg;
- }
- if ((lo32.X_add_number & 0xffff0000) == 0)
- {
- if (freg != 0)
+ if (mips_opts.mips16)
{
- macro_build (NULL, "dsll32", SHFT_FMT, reg, freg, 0);
- freg = reg;
+ ip->fixed_p = 1;
+ ip->mips16_absolute_jump_p = (*reloc_type == BFD_RELOC_MIPS16_JMP);
}
+ add_fixed_insn (ip);
}
- else
+
+ if (!ip->complete_p && *reloc_type < BFD_RELOC_UNUSED)
{
- expressionS mid16;
+ bfd_reloc_code_real_type final_type[3];
+ reloc_howto_type *howto0;
+ reloc_howto_type *howto;
+ int i;
- if ((freg == 0) && (lo32.X_add_number == (offsetT) 0xffffffff))
- {
- macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
- macro_build (NULL, "dsrl32", SHFT_FMT, reg, reg, 0);
- return;
- }
+ /* Perform any necessary conversion to microMIPS relocations
+ and find out how many relocations there actually are. */
+ for (i = 0; i < 3 && reloc_type[i] != BFD_RELOC_UNUSED; i++)
+ final_type[i] = micromips_map_reloc (reloc_type[i]);
- if (freg != 0)
+ /* In a compound relocation, it is the final (outermost)
+ operator that determines the relocated field. */
+ howto = howto0 = bfd_reloc_type_lookup (stdoutput, final_type[i - 1]);
+ if (!howto)
+ abort ();
+
+ if (i > 1)
+ howto0 = bfd_reloc_type_lookup (stdoutput, final_type[0]);
+ ip->fixp[0] = fix_new_exp (ip->frag, ip->where,
+ bfd_get_reloc_size (howto),
+ address_expr,
+ howto0 && howto0->pc_relative,
+ final_type[0]);
+
+ /* Tag symbols that have a R_MIPS16_26 relocation against them. */
+ if (final_type[0] == BFD_RELOC_MIPS16_JMP && ip->fixp[0]->fx_addsy)
+ *symbol_get_tc (ip->fixp[0]->fx_addsy) = 1;
+
+ /* These relocations can have an addend that won't fit in
+ 4 octets for 64bit assembly. */
+ if (HAVE_64BIT_GPRS
+ && ! howto->partial_inplace
+ && (reloc_type[0] == BFD_RELOC_16
+ || reloc_type[0] == BFD_RELOC_32
+ || reloc_type[0] == BFD_RELOC_MIPS_JMP
+ || reloc_type[0] == BFD_RELOC_GPREL16
+ || reloc_type[0] == BFD_RELOC_MIPS_LITERAL
+ || reloc_type[0] == BFD_RELOC_GPREL32
+ || reloc_type[0] == BFD_RELOC_64
+ || reloc_type[0] == BFD_RELOC_CTOR
+ || reloc_type[0] == BFD_RELOC_MIPS_SUB
+ || reloc_type[0] == BFD_RELOC_MIPS_HIGHEST
+ || reloc_type[0] == BFD_RELOC_MIPS_HIGHER
+ || reloc_type[0] == BFD_RELOC_MIPS_SCN_DISP
+ || reloc_type[0] == BFD_RELOC_MIPS_REL16
+ || reloc_type[0] == BFD_RELOC_MIPS_RELGOT
+ || reloc_type[0] == BFD_RELOC_MIPS16_GPREL
+ || hi16_reloc_p (reloc_type[0])
+ || lo16_reloc_p (reloc_type[0])))
+ ip->fixp[0]->fx_no_overflow = 1;
+
+ /* These relocations can have an addend that won't fit in 2 octets. */
+ if (reloc_type[0] == BFD_RELOC_MICROMIPS_7_PCREL_S1
+ || reloc_type[0] == BFD_RELOC_MICROMIPS_10_PCREL_S1)
+ ip->fixp[0]->fx_no_overflow = 1;
+
+ if (mips_relax.sequence)
{
- macro_build (NULL, "dsll", SHFT_FMT, reg, freg, 16);
- freg = reg;
+ if (mips_relax.first_fixup == 0)
+ mips_relax.first_fixup = ip->fixp[0];
}
- mid16 = lo32;
- mid16.X_add_number >>= 16;
- macro_build (&mid16, "ori", "t,r,i", reg, freg, BFD_RELOC_LO16);
- macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
- freg = reg;
- }
- if ((lo32.X_add_number & 0xffff) != 0)
- macro_build (&lo32, "ori", "t,r,i", reg, freg, BFD_RELOC_LO16);
-}
+ else if (reloc_needs_lo_p (*reloc_type))
+ {
+ struct mips_hi_fixup *hi_fixup;
-static inline void
-load_delay_nop (void)
-{
- if (!gpr_interlocks)
- macro_build (NULL, "nop", "");
-}
+ /* Reuse the last entry if it already has a matching %lo. */
+ hi_fixup = mips_hi_fixup_list;
+ if (hi_fixup == 0
+ || !fixup_has_matching_lo_p (hi_fixup->fixp))
+ {
+ hi_fixup = ((struct mips_hi_fixup *)
+ xmalloc (sizeof (struct mips_hi_fixup)));
+ hi_fixup->next = mips_hi_fixup_list;
+ mips_hi_fixup_list = hi_fixup;
+ }
+ hi_fixup->fixp = ip->fixp[0];
+ hi_fixup->seg = now_seg;
+ }
-/* Load an address into a register. */
+ /* Add fixups for the second and third relocations, if given.
+ Note that the ABI allows the second relocation to be
+ against RSS_UNDEF, RSS_GP, RSS_GP0 or RSS_LOC. At the
+ moment we only use RSS_UNDEF, but we could add support
+ for the others if it ever becomes necessary. */
+ for (i = 1; i < 3; i++)
+ if (reloc_type[i] != BFD_RELOC_UNUSED)
+ {
+ ip->fixp[i] = fix_new (ip->frag, ip->where,
+ ip->fixp[0]->fx_size, NULL, 0,
+ FALSE, final_type[i]);
-static void
-load_address (int reg, expressionS *ep, int *used_at)
-{
- if (ep->X_op != O_constant
- && ep->X_op != O_symbol)
- {
- as_bad (_("expression too complex"));
- ep->X_op = O_constant;
+ /* Use fx_tcbit to mark compound relocs. */
+ ip->fixp[0]->fx_tcbit = 1;
+ ip->fixp[i]->fx_tcbit = 1;
+ }
}
+ install_insn (ip);
- if (ep->X_op == O_constant)
- {
- load_register (reg, ep, HAVE_64BIT_ADDRESSES);
- return;
- }
+ /* Update the register mask information. */
+ mips_gprmask |= gpr_read_mask (ip) | gpr_write_mask (ip);
+ mips_cprmask[1] |= fpr_read_mask (ip) | fpr_write_mask (ip);
- if (mips_pic == NO_PIC)
+ switch (method)
{
- /* If this is a reference to a GP relative symbol, we want
- addiu $reg,$gp,<sym> (BFD_RELOC_GPREL16)
- Otherwise we want
- lui $reg,<sym> (BFD_RELOC_HI16_S)
- addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
- If we have an addend, we always use the latter form.
+ case APPEND_ADD:
+ insert_into_history (0, 1, ip);
+ break;
- With 64bit address space and a usable $at we want
- lui $reg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- lui $at,<sym> (BFD_RELOC_HI16_S)
- daddiu $reg,<sym> (BFD_RELOC_MIPS_HIGHER)
- daddiu $at,<sym> (BFD_RELOC_LO16)
- dsll32 $reg,0
- daddu $reg,$reg,$at
+ case APPEND_ADD_WITH_NOP:
+ {
+ struct mips_cl_insn *nop;
- If $at is already in use, we use a path which is suboptimal
- on superscalar processors.
- lui $reg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- daddiu $reg,<sym> (BFD_RELOC_MIPS_HIGHER)
- dsll $reg,16
- daddiu $reg,<sym> (BFD_RELOC_HI16_S)
- dsll $reg,16
- daddiu $reg,<sym> (BFD_RELOC_LO16)
+ insert_into_history (0, 1, ip);
+ nop = get_delay_slot_nop (ip);
+ add_fixed_insn (nop);
+ insert_into_history (0, 1, nop);
+ if (mips_relax.sequence)
+ mips_relax.sizes[mips_relax.sequence - 1] += insn_length (nop);
+ }
+ break;
- For GP relative symbols in 64bit address space we can use
- the same sequence as in 32bit address space. */
- if (HAVE_64BIT_SYMBOLS)
- {
- if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (ep->X_add_symbol, 1))
- {
- relax_start (ep->X_add_symbol);
- macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg,
- mips_gp_register, BFD_RELOC_GPREL16);
- relax_switch ();
- }
+ case APPEND_ADD_COMPACT:
+ /* Convert MIPS16 jr/jalr into a "compact" jump. */
+ gas_assert (mips_opts.mips16);
+ ip->insn_opcode |= 0x0080;
+ find_altered_mips16_opcode (ip);
+ install_insn (ip);
+ insert_into_history (0, 1, ip);
+ break;
- if (*used_at == 0 && mips_opts.at)
- {
- macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST);
- macro_build (ep, "lui", LUI_FMT, AT, BFD_RELOC_HI16_S);
- macro_build (ep, "daddiu", "t,r,j", reg, reg,
- BFD_RELOC_MIPS_HIGHER);
- macro_build (ep, "daddiu", "t,r,j", AT, AT, BFD_RELOC_LO16);
- macro_build (NULL, "dsll32", SHFT_FMT, reg, reg, 0);
- macro_build (NULL, "daddu", "d,v,t", reg, reg, AT);
- *used_at = 1;
- }
- else
- {
- macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST);
- macro_build (ep, "daddiu", "t,r,j", reg, reg,
- BFD_RELOC_MIPS_HIGHER);
- macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
- macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_HI16_S);
- macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
- macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_LO16);
- }
+ case APPEND_SWAP:
+ {
+ struct mips_cl_insn delay = history[0];
+ if (mips_opts.mips16)
+ {
+ know (delay.frag == ip->frag);
+ move_insn (ip, delay.frag, delay.where);
+ move_insn (&delay, ip->frag, ip->where + insn_length (ip));
+ }
+ else if (relaxed_branch || delay.frag != ip->frag)
+ {
+ /* Add the delay slot instruction to the end of the
+ current frag and shrink the fixed part of the
+ original frag. If the branch occupies the tail of
+ the latter, move it backwards to cover the gap. */
+ delay.frag->fr_fix -= branch_disp;
+ if (delay.frag == ip->frag)
+ move_insn (ip, ip->frag, ip->where - branch_disp);
+ add_fixed_insn (&delay);
+ }
+ else
+ {
+ move_insn (&delay, ip->frag,
+ ip->where - branch_disp + insn_length (ip));
+ move_insn (ip, history[0].frag, history[0].where);
+ }
+ history[0] = *ip;
+ delay.fixed_p = 1;
+ insert_into_history (0, 1, &delay);
+ }
+ break;
+ }
- if (mips_relax.sequence)
- relax_end ();
- }
- else
- {
- if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (ep->X_add_symbol, 1))
- {
- relax_start (ep->X_add_symbol);
- macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg,
- mips_gp_register, BFD_RELOC_GPREL16);
- relax_switch ();
- }
- macro_build_lui (ep, reg);
- macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j",
- reg, reg, BFD_RELOC_LO16);
- if (mips_relax.sequence)
- relax_end ();
- }
+ /* If we have just completed an unconditional branch, clear the history. */
+ if ((delayed_branch_p (&history[1]) && uncond_branch_p (&history[1]))
+ || (compact_branch_p (&history[0]) && uncond_branch_p (&history[0])))
+ {
+ unsigned int i;
+
+ mips_no_prev_insn ();
+
+ for (i = 0; i < ARRAY_SIZE (history); i++)
+ history[i].cleared_p = 1;
}
- else if (!mips_big_got)
+
+ /* We need to emit a label at the end of branch-likely macros. */
+ if (emit_branch_likely_macro)
{
- expressionS ex;
+ emit_branch_likely_macro = FALSE;
+ micromips_add_label ();
+ }
- /* If this is a reference to an external symbol, we want
- lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- Otherwise we want
- lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
- If there is a constant, it must be added in after.
+ /* We just output an insn, so the next one doesn't have a label. */
+ mips_clear_insn_labels ();
+}
- If we have NewABI, we want
- lw $reg,<sym+cst>($gp) (BFD_RELOC_MIPS_GOT_DISP)
- unless we're referencing a global symbol with a non-zero
- offset, in which case cst must be added separately. */
- if (HAVE_NEWABI)
- {
- if (ep->X_add_number)
- {
- ex.X_add_number = ep->X_add_number;
- ep->X_add_number = 0;
- relax_start (ep->X_add_symbol);
- macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
- BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
- if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- ex.X_op = O_constant;
- macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j",
- reg, reg, BFD_RELOC_LO16);
- ep->X_add_number = ex.X_add_number;
- relax_switch ();
- }
- macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
- BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
- if (mips_relax.sequence)
- relax_end ();
- }
- else
- {
- ex.X_add_number = ep->X_add_number;
- ep->X_add_number = 0;
- macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- load_delay_nop ();
- relax_start (ep->X_add_symbol);
- relax_switch ();
- macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
- BFD_RELOC_LO16);
- relax_end ();
+/* Forget that there was any previous instruction or label.
+ When BRANCH is true, the branch history is also flushed. */
- if (ex.X_add_number != 0)
- {
- if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- ex.X_op = O_constant;
- macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j",
- reg, reg, BFD_RELOC_LO16);
- }
+static void
+mips_no_prev_insn (void)
+{
+ prev_nop_frag = NULL;
+ insert_into_history (0, ARRAY_SIZE (history), NOP_INSN);
+ mips_clear_insn_labels ();
+}
+
+/* This function must be called before we emit something other than
+ instructions. It is like mips_no_prev_insn except that it inserts
+ any NOPS that might be needed by previous instructions. */
+
+void
+mips_emit_delays (void)
+{
+ if (! mips_opts.noreorder)
+ {
+ int nops = nops_for_insn (0, history, NULL);
+ if (nops > 0)
+ {
+ while (nops-- > 0)
+ add_fixed_insn (NOP_INSN);
+ mips_move_text_labels ();
}
}
- else if (mips_big_got)
- {
- expressionS ex;
+ mips_no_prev_insn ();
+}
- /* This is the large GOT case. If this is a reference to an
- external symbol, we want
- lui $reg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- addu $reg,$reg,$gp
- lw $reg,<sym>($reg) (BFD_RELOC_MIPS_GOT_LO16)
+/* Start a (possibly nested) noreorder block. */
- Otherwise, for a reference to a local symbol in old ABI, we want
- lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
- If there is a constant, it must be added in after.
+static void
+start_noreorder (void)
+{
+ if (mips_opts.noreorder == 0)
+ {
+ unsigned int i;
+ int nops;
- In the NewABI, for local symbols, with or without offsets, we want:
- lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
- addiu $reg,$reg,<sym> (BFD_RELOC_MIPS_GOT_OFST)
- */
- if (HAVE_NEWABI)
- {
- ex.X_add_number = ep->X_add_number;
- ep->X_add_number = 0;
- relax_start (ep->X_add_symbol);
- macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- reg, reg, mips_gp_register);
- macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)",
- reg, BFD_RELOC_MIPS_GOT_LO16, reg);
- if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- else if (ex.X_add_number)
- {
- ex.X_op = O_constant;
- macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
- BFD_RELOC_LO16);
- }
+ /* None of the instructions before the .set noreorder can be moved. */
+ for (i = 0; i < ARRAY_SIZE (history); i++)
+ history[i].fixed_p = 1;
- ep->X_add_number = ex.X_add_number;
- relax_switch ();
- macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
- BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
- macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
- BFD_RELOC_MIPS_GOT_OFST);
- relax_end ();
- }
- else
+ /* Insert any nops that might be needed between the .set noreorder
+ block and the previous instructions. We will later remove any
+ nops that turn out not to be needed. */
+ nops = nops_for_insn (0, history, NULL);
+ if (nops > 0)
{
- ex.X_add_number = ep->X_add_number;
- ep->X_add_number = 0;
- relax_start (ep->X_add_symbol);
- macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- reg, reg, mips_gp_register);
- macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)",
- reg, BFD_RELOC_MIPS_GOT_LO16, reg);
- relax_switch ();
- if (reg_needs_delay (mips_gp_register))
+ if (mips_optimize != 0)
{
- /* We need a nop before loading from $gp. This special
- check is required because the lui which starts the main
- instruction stream does not refer to $gp, and so will not
- insert the nop which may be required. */
- macro_build (NULL, "nop", "");
+ /* Record the frag which holds the nop instructions, so
+ that we can remove them if we don't need them. */
+ frag_grow (nops * NOP_INSN_SIZE);
+ prev_nop_frag = frag_now;
+ prev_nop_frag_holds = nops;
+ prev_nop_frag_required = 0;
+ prev_nop_frag_since = 0;
}
- macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- load_delay_nop ();
- macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
- BFD_RELOC_LO16);
- relax_end ();
- if (ex.X_add_number != 0)
- {
- if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- ex.X_op = O_constant;
- macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
- BFD_RELOC_LO16);
- }
+ for (; nops > 0; --nops)
+ add_fixed_insn (NOP_INSN);
+
+ /* Move on to a new frag, so that it is safe to simply
+ decrease the size of prev_nop_frag. */
+ frag_wane (frag_now);
+ frag_new (0);
+ mips_move_text_labels ();
}
+ mips_mark_labels ();
+ mips_clear_insn_labels ();
}
- else
- abort ();
-
- if (!mips_opts.at && *used_at == 1)
- as_bad (_("Macro used $at after \".set noat\""));
+ mips_opts.noreorder++;
+ mips_any_noreorder = 1;
}
-/* Move the contents of register SOURCE into register DEST. */
+/* End a nested noreorder block. */
static void
-move_register (int dest, int source)
+end_noreorder (void)
{
- /* Prefer to use a 16-bit microMIPS instruction unless the previous
- instruction specifically requires a 32-bit one. */
- if (mips_opts.micromips
- && !mips_opts.insn32
- && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
- macro_build (NULL, "move", "mp,mj", dest, source);
- else
- macro_build (NULL, HAVE_32BIT_GPRS ? "addu" : "daddu", "d,v,t",
- dest, source, 0);
+ mips_opts.noreorder--;
+ if (mips_opts.noreorder == 0 && prev_nop_frag != NULL)
+ {
+ /* Commit to inserting prev_nop_frag_required nops and go back to
+ handling nop insertion the .set reorder way. */
+ prev_nop_frag->fr_fix -= ((prev_nop_frag_holds - prev_nop_frag_required)
+ * NOP_INSN_SIZE);
+ insert_into_history (prev_nop_frag_since,
+ prev_nop_frag_required, NOP_INSN);
+ prev_nop_frag = NULL;
+ }
}
-/* Emit an SVR4 PIC sequence to load address LOCAL into DEST, where
- LOCAL is the sum of a symbol and a 16-bit or 32-bit displacement.
- The two alternatives are:
-
- Global symbol Local sybmol
- ------------- ------------
- lw DEST,%got(SYMBOL) lw DEST,%got(SYMBOL + OFFSET)
- ... ...
- addiu DEST,DEST,OFFSET addiu DEST,DEST,%lo(SYMBOL + OFFSET)
-
- load_got_offset emits the first instruction and add_got_offset
- emits the second for a 16-bit offset or add_got_offset_hilo emits
- a sequence to add a 32-bit offset using a scratch register. */
+/* Sign-extend 32-bit mode constants that have bit 31 set and all
+ higher bits unset. */
static void
-load_got_offset (int dest, expressionS *local)
+normalize_constant_expr (expressionS *ex)
{
- expressionS global;
-
- global = *local;
- global.X_add_number = 0;
-
- relax_start (local->X_add_symbol);
- macro_build (&global, ADDRESS_LOAD_INSN, "t,o(b)", dest,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- relax_switch ();
- macro_build (local, ADDRESS_LOAD_INSN, "t,o(b)", dest,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- relax_end ();
+ if (ex->X_op == O_constant
+ && IS_ZEXT_32BIT_NUM (ex->X_add_number))
+ ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
+ - 0x80000000);
}
+/* Sign-extend 32-bit mode address offsets that have bit 31 set and
+ all higher bits unset. */
+
static void
-add_got_offset (int dest, expressionS *local)
+normalize_address_expr (expressionS *ex)
{
- expressionS global;
+ if (((ex->X_op == O_constant && HAVE_32BIT_ADDRESSES)
+ || (ex->X_op == O_symbol && HAVE_32BIT_SYMBOLS))
+ && IS_ZEXT_32BIT_NUM (ex->X_add_number))
+ ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
+ - 0x80000000);
+}
- global.X_op = O_constant;
- global.X_op_symbol = NULL;
- global.X_add_symbol = NULL;
- global.X_add_number = local->X_add_number;
+/* Try to match TOKENS against OPCODE, storing the result in INSN.
+ Return true if the match was successful.
- relax_start (local->X_add_symbol);
- macro_build (&global, ADDRESS_ADDI_INSN, "t,r,j",
- dest, dest, BFD_RELOC_LO16);
- relax_switch ();
- macro_build (local, ADDRESS_ADDI_INSN, "t,r,j", dest, dest, BFD_RELOC_LO16);
- relax_end ();
-}
+ OPCODE_EXTRA is a value that should be ORed into the opcode
+ (used for VU0 channel suffixes, etc.). MORE_ALTS is true if
+ there are more alternatives after OPCODE and SOFT_MATCH is
+ as for mips_arg_info. */
-static void
-add_got_offset_hilo (int dest, expressionS *local, int tmp)
+static bfd_boolean
+match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
+ struct mips_operand_token *tokens, unsigned int opcode_extra,
+ bfd_boolean lax_match, bfd_boolean complete_p)
{
- expressionS global;
- int hold_mips_optimize;
+ const char *args;
+ struct mips_arg_info arg;
+ const struct mips_operand *operand;
+ char c;
- global.X_op = O_constant;
- global.X_op_symbol = NULL;
- global.X_add_symbol = NULL;
- global.X_add_number = local->X_add_number;
+ imm_expr.X_op = O_absent;
+ offset_expr.X_op = O_absent;
+ offset_reloc[0] = BFD_RELOC_UNUSED;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
- relax_start (local->X_add_symbol);
- load_register (tmp, &global, HAVE_64BIT_ADDRESSES);
- relax_switch ();
- /* Set mips_optimize around the lui instruction to avoid
- inserting an unnecessary nop after the lw. */
- hold_mips_optimize = mips_optimize;
- mips_optimize = 2;
- macro_build_lui (&global, tmp);
- mips_optimize = hold_mips_optimize;
- macro_build (local, ADDRESS_ADDI_INSN, "t,r,j", tmp, tmp, BFD_RELOC_LO16);
- relax_end ();
+ create_insn (insn, opcode);
+ /* When no opcode suffix is specified, assume ".xyzw". */
+ if ((opcode->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) != 0 && opcode_extra == 0)
+ insn->insn_opcode |= 0xf << mips_vu0_channel_mask.lsb;
+ else
+ insn->insn_opcode |= opcode_extra;
+ memset (&arg, 0, sizeof (arg));
+ arg.insn = insn;
+ arg.token = tokens;
+ arg.argnum = 1;
+ arg.last_regno = ILLEGAL_REG;
+ arg.dest_regno = ILLEGAL_REG;
+ arg.lax_match = lax_match;
+ for (args = opcode->args;; ++args)
+ {
+ if (arg.token->type == OT_END)
+ {
+ /* Handle unary instructions in which only one operand is given.
+ The source is then the same as the destination. */
+ if (arg.opnum == 1 && *args == ',')
+ {
+ operand = (mips_opts.micromips
+ ? decode_micromips_operand (args + 1)
+ : decode_mips_operand (args + 1));
+ if (operand && mips_optional_operand_p (operand))
+ {
+ arg.token = tokens;
+ arg.argnum = 1;
+ continue;
+ }
+ }
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dest, dest, tmp);
-}
+ /* Treat elided base registers as $0. */
+ if (strcmp (args, "(b)") == 0)
+ args += 3;
-/* Emit a sequence of instructions to emulate a branch likely operation.
- BR is an ordinary branch corresponding to one to be emulated. BRNEG
- is its complementing branch with the original condition negated.
- CALL is set if the original branch specified the link operation.
- EP, FMT, SREG and TREG specify the usual macro_build() parameters.
+ if (args[0] == '+')
+ switch (args[1])
+ {
+ case 'K':
+ case 'N':
+ /* The register suffix is optional. */
+ args += 2;
+ break;
+ }
- Code like this is produced in the noreorder mode:
+ /* Fail the match if there were too few operands. */
+ if (*args)
+ return FALSE;
- BRNEG <args>, 1f
- nop
- b <sym>
- delay slot (executed only if branch taken)
- 1:
+ /* Successful match. */
+ if (!complete_p)
+ return TRUE;
+ clear_insn_error ();
+ if (arg.dest_regno == arg.last_regno
+ && strncmp (insn->insn_mo->name, "jalr", 4) == 0)
+ {
+ if (arg.opnum == 2)
+ set_insn_error
+ (0, _("source and destination must be different"));
+ else if (arg.last_regno == 31)
+ set_insn_error
+ (0, _("a destination register must be supplied"));
+ }
+ else if (arg.last_regno == 31
+ && (strncmp (insn->insn_mo->name, "bltzal", 6) == 0
+ || strncmp (insn->insn_mo->name, "bgezal", 6) == 0))
+ set_insn_error (0, _("the source register must not be $31"));
+ check_completed_insn (&arg);
+ return TRUE;
+ }
- or, if CALL is set:
+ /* Fail the match if the line has too many operands. */
+ if (*args == 0)
+ return FALSE;
- BRNEG <args>, 1f
- nop
- bal <sym>
- delay slot (executed only if branch taken)
- 1:
+ /* Handle characters that need to match exactly. */
+ if (*args == '(' || *args == ')' || *args == ',')
+ {
+ if (match_char (&arg, *args))
+ continue;
+ return FALSE;
+ }
+ if (*args == '#')
+ {
+ ++args;
+ if (arg.token->type == OT_DOUBLE_CHAR
+ && arg.token->u.ch == *args)
+ {
+ ++arg.token;
+ continue;
+ }
+ return FALSE;
+ }
- In the reorder mode the delay slot would be filled with a nop anyway,
- so code produced is simply:
+ /* Handle special macro operands. Work out the properties of
+ other operands. */
+ arg.opnum += 1;
+ switch (*args)
+ {
+ case '+':
+ switch (args[1])
+ {
+ case 'i':
+ *offset_reloc = BFD_RELOC_MIPS_JMP;
+ break;
+ }
+ break;
- BR <args>, <sym>
- nop
+ case 'I':
+ if (!match_const_int (&arg, &imm_expr.X_add_number))
+ return FALSE;
+ imm_expr.X_op = O_constant;
+ if (HAVE_32BIT_GPRS)
+ normalize_constant_expr (&imm_expr);
+ continue;
- This function is used when producing code for the microMIPS ASE that
- does not implement branch likely instructions in hardware. */
+ case 'A':
+ if (arg.token->type == OT_CHAR && arg.token->u.ch == '(')
+ {
+ /* Assume that the offset has been elided and that what
+ we saw was a base register. The match will fail later
+ if that assumption turns out to be wrong. */
+ offset_expr.X_op = O_constant;
+ offset_expr.X_add_number = 0;
+ }
+ else
+ {
+ if (!match_expression (&arg, &offset_expr, offset_reloc))
+ return FALSE;
+ normalize_address_expr (&offset_expr);
+ }
+ continue;
-static void
-macro_build_branch_likely (const char *br, const char *brneg,
- int call, expressionS *ep, const char *fmt,
- unsigned int sreg, unsigned int treg)
-{
- int noreorder = mips_opts.noreorder;
- expressionS expr1;
+ case 'F':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 8, TRUE))
+ return FALSE;
+ continue;
- gas_assert (mips_opts.micromips);
- start_noreorder ();
- if (noreorder)
- {
- micromips_label_expr (&expr1);
- macro_build (&expr1, brneg, fmt, sreg, treg);
- macro_build (NULL, "nop", "");
- macro_build (ep, call ? "bal" : "b", "p");
+ case 'L':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 8, FALSE))
+ return FALSE;
+ continue;
- /* Set to true so that append_insn adds a label. */
- emit_branch_likely_macro = TRUE;
- }
- else
- {
- macro_build (ep, br, fmt, sreg, treg);
- macro_build (NULL, "nop", "");
- }
- end_noreorder ();
-}
+ case 'f':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 4, TRUE))
+ return FALSE;
+ continue;
-/* Emit a coprocessor branch-likely macro specified by TYPE, using CC as
- the condition code tested. EP specifies the branch target. */
+ case 'l':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 4, FALSE))
+ return FALSE;
+ continue;
-static void
-macro_build_branch_ccl (int type, expressionS *ep, unsigned int cc)
-{
- const int call = 0;
- const char *brneg;
- const char *br;
+ case 'p':
+ *offset_reloc = BFD_RELOC_16_PCREL_S2;
+ break;
- switch (type)
- {
- case M_BC1FL:
- br = "bc1f";
- brneg = "bc1t";
- break;
- case M_BC1TL:
- br = "bc1t";
- brneg = "bc1f";
- break;
- case M_BC2FL:
- br = "bc2f";
- brneg = "bc2t";
- break;
- case M_BC2TL:
- br = "bc2t";
- brneg = "bc2f";
- break;
- default:
- abort ();
- }
- macro_build_branch_likely (br, brneg, call, ep, "N,p", cc, ZERO);
-}
+ case 'a':
+ *offset_reloc = BFD_RELOC_MIPS_JMP;
+ break;
-/* Emit a two-argument branch macro specified by TYPE, using SREG as
- the register tested. EP specifies the branch target. */
+ case 'm':
+ gas_assert (mips_opts.micromips);
+ c = args[1];
+ switch (c)
+ {
+ case 'D':
+ case 'E':
+ if (!forced_insn_length)
+ *offset_reloc = (int) BFD_RELOC_UNUSED + c;
+ else if (c == 'D')
+ *offset_reloc = BFD_RELOC_MICROMIPS_10_PCREL_S1;
+ else
+ *offset_reloc = BFD_RELOC_MICROMIPS_7_PCREL_S1;
+ break;
+ }
+ break;
+ }
-static void
-macro_build_branch_rs (int type, expressionS *ep, unsigned int sreg)
-{
- const char *brneg = NULL;
- const char *br;
- int call = 0;
+ operand = (mips_opts.micromips
+ ? decode_micromips_operand (args)
+ : decode_mips_operand (args));
+ if (!operand)
+ abort ();
- switch (type)
- {
- case M_BGEZ:
- br = "bgez";
- break;
- case M_BGEZL:
- br = mips_opts.micromips ? "bgez" : "bgezl";
- brneg = "bltz";
- break;
- case M_BGEZALL:
- gas_assert (mips_opts.micromips);
- br = mips_opts.insn32 ? "bgezal" : "bgezals";
- brneg = "bltz";
- call = 1;
- break;
- case M_BGTZ:
- br = "bgtz";
- break;
- case M_BGTZL:
- br = mips_opts.micromips ? "bgtz" : "bgtzl";
- brneg = "blez";
- break;
- case M_BLEZ:
- br = "blez";
- break;
- case M_BLEZL:
- br = mips_opts.micromips ? "blez" : "blezl";
- brneg = "bgtz";
- break;
- case M_BLTZ:
- br = "bltz";
- break;
- case M_BLTZL:
- br = mips_opts.micromips ? "bltz" : "bltzl";
- brneg = "bgez";
- break;
- case M_BLTZALL:
- gas_assert (mips_opts.micromips);
- br = mips_opts.insn32 ? "bltzal" : "bltzals";
- brneg = "bgez";
- call = 1;
- break;
- default:
- abort ();
+ /* Skip prefixes. */
+ if (*args == '+' || *args == 'm')
+ args++;
+
+ if (mips_optional_operand_p (operand)
+ && args[1] == ','
+ && (arg.token[0].type != OT_REG
+ || arg.token[1].type == OT_END))
+ {
+ /* Assume that the register has been elided and is the
+ same as the first operand. */
+ arg.token = tokens;
+ arg.argnum = 1;
+ }
+
+ if (!match_operand (&arg, operand))
+ return FALSE;
}
- if (mips_opts.micromips && brneg)
- macro_build_branch_likely (br, brneg, call, ep, "s,p", sreg, ZERO);
- else
- macro_build (ep, br, "s,p", sreg);
}
-/* Emit a three-argument branch macro specified by TYPE, using SREG and
- TREG as the registers tested. EP specifies the branch target. */
+/* Like match_insn, but for MIPS16. */
-static void
-macro_build_branch_rsrt (int type, expressionS *ep,
- unsigned int sreg, unsigned int treg)
+static bfd_boolean
+match_mips16_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
+ struct mips_operand_token *tokens)
{
- const char *brneg = NULL;
- const int call = 0;
- const char *br;
+ const char *args;
+ const struct mips_operand *operand;
+ const struct mips_operand *ext_operand;
+ struct mips_arg_info arg;
+ int relax_char;
- switch (type)
+ create_insn (insn, opcode);
+ imm_expr.X_op = O_absent;
+ offset_expr.X_op = O_absent;
+ offset_reloc[0] = BFD_RELOC_UNUSED;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
+ relax_char = 0;
+
+ memset (&arg, 0, sizeof (arg));
+ arg.insn = insn;
+ arg.token = tokens;
+ arg.argnum = 1;
+ arg.last_regno = ILLEGAL_REG;
+ arg.dest_regno = ILLEGAL_REG;
+ relax_char = 0;
+ for (args = opcode->args;; ++args)
{
- case M_BEQ:
- case M_BEQ_I:
- br = "beq";
- break;
- case M_BEQL:
- case M_BEQL_I:
- br = mips_opts.micromips ? "beq" : "beql";
- brneg = "bne";
- break;
- case M_BNE:
- case M_BNE_I:
- br = "bne";
- break;
- case M_BNEL:
- case M_BNEL_I:
- br = mips_opts.micromips ? "bne" : "bnel";
- brneg = "beq";
- break;
- default:
- abort ();
+ int c;
+
+ if (arg.token->type == OT_END)
+ {
+ offsetT value;
+
+ /* Handle unary instructions in which only one operand is given.
+ The source is then the same as the destination. */
+ if (arg.opnum == 1 && *args == ',')
+ {
+ operand = decode_mips16_operand (args[1], FALSE);
+ if (operand && mips_optional_operand_p (operand))
+ {
+ arg.token = tokens;
+ arg.argnum = 1;
+ continue;
+ }
+ }
+
+ /* Fail the match if there were too few operands. */
+ if (*args)
+ return FALSE;
+
+ /* Successful match. Stuff the immediate value in now, if
+ we can. */
+ clear_insn_error ();
+ if (opcode->pinfo == INSN_MACRO)
+ {
+ gas_assert (relax_char == 0 || relax_char == 'p');
+ gas_assert (*offset_reloc == BFD_RELOC_UNUSED);
+ }
+ else if (relax_char
+ && offset_expr.X_op == O_constant
+ && calculate_reloc (*offset_reloc,
+ offset_expr.X_add_number,
+ &value))
+ {
+ mips16_immed (NULL, 0, relax_char, *offset_reloc, value,
+ forced_insn_length, &insn->insn_opcode);
+ offset_expr.X_op = O_absent;
+ *offset_reloc = BFD_RELOC_UNUSED;
+ }
+ else if (relax_char && *offset_reloc != BFD_RELOC_UNUSED)
+ {
+ if (forced_insn_length == 2)
+ set_insn_error (0, _("invalid unextended operand value"));
+ forced_insn_length = 4;
+ insn->insn_opcode |= MIPS16_EXTEND;
+ }
+ else if (relax_char)
+ *offset_reloc = (int) BFD_RELOC_UNUSED + relax_char;
+
+ check_completed_insn (&arg);
+ return TRUE;
+ }
+
+ /* Fail the match if the line has too many operands. */
+ if (*args == 0)
+ return FALSE;
+
+ /* Handle characters that need to match exactly. */
+ if (*args == '(' || *args == ')' || *args == ',')
+ {
+ if (match_char (&arg, *args))
+ continue;
+ return FALSE;
+ }
+
+ arg.opnum += 1;
+ c = *args;
+ switch (c)
+ {
+ case 'p':
+ case 'q':
+ case 'A':
+ case 'B':
+ case 'E':
+ relax_char = c;
+ break;
+
+ case 'I':
+ if (!match_const_int (&arg, &imm_expr.X_add_number))
+ return FALSE;
+ imm_expr.X_op = O_constant;
+ if (HAVE_32BIT_GPRS)
+ normalize_constant_expr (&imm_expr);
+ continue;
+
+ case 'a':
+ case 'i':
+ *offset_reloc = BFD_RELOC_MIPS16_JMP;
+ insn->insn_opcode <<= 16;
+ break;
+ }
+
+ operand = decode_mips16_operand (c, FALSE);
+ if (!operand)
+ abort ();
+
+ /* '6' is a special case. It is used for BREAK and SDBBP,
+ whose operands are only meaningful to the software that decodes
+ them. This means that there is no architectural reason why
+ they cannot be prefixed by EXTEND, but in practice,
+ exception handlers will only look at the instruction
+ itself. We therefore allow '6' to be extended when
+ disassembling but not when assembling. */
+ if (operand->type != OP_PCREL && c != '6')
+ {
+ ext_operand = decode_mips16_operand (c, TRUE);
+ if (operand != ext_operand)
+ {
+ if (arg.token->type == OT_CHAR && arg.token->u.ch == '(')
+ {
+ offset_expr.X_op = O_constant;
+ offset_expr.X_add_number = 0;
+ relax_char = c;
+ continue;
+ }
+
+ /* We need the OT_INTEGER check because some MIPS16
+ immediate variants are listed before the register ones. */
+ if (arg.token->type != OT_INTEGER
+ || !match_expression (&arg, &offset_expr, offset_reloc))
+ return FALSE;
+
+ /* '8' is used for SLTI(U) and has traditionally not
+ been allowed to take relocation operators. */
+ if (offset_reloc[0] != BFD_RELOC_UNUSED
+ && (ext_operand->size != 16 || c == '8'))
+ return FALSE;
+
+ relax_char = c;
+ continue;
+ }
+ }
+
+ if (mips_optional_operand_p (operand)
+ && args[1] == ','
+ && (arg.token[0].type != OT_REG
+ || arg.token[1].type == OT_END))
+ {
+ /* Assume that the register has been elided and is the
+ same as the first operand. */
+ arg.token = tokens;
+ arg.argnum = 1;
+ }
+
+ if (!match_operand (&arg, operand))
+ return FALSE;
}
- if (mips_opts.micromips && brneg)
- macro_build_branch_likely (br, brneg, call, ep, "s,t,p", sreg, treg);
- else
- macro_build (ep, br, "s,t,p", sreg, treg);
}
-/* Return the high part that should be loaded in order to make the low
- part of VALUE accessible using an offset of OFFBITS bits. */
+/* Record that the current instruction is invalid for the current ISA. */
-static offsetT
-offset_high_part (offsetT value, unsigned int offbits)
+static void
+match_invalid_for_isa (void)
{
- offsetT bias;
- addressT low_mask;
-
- if (offbits == 0)
- return value;
- bias = 1 << (offbits - 1);
- low_mask = bias * 2 - 1;
- return (value + bias) & ~low_mask;
+ set_insn_error_ss
+ (0, _("opcode not supported on this processor: %s (%s)"),
+ mips_cpu_info_from_arch (mips_opts.arch)->name,
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
}
-/* Return true if the value stored in offset_expr and offset_reloc
- fits into a signed offset of OFFBITS bits. RANGE is the maximum
- amount that the caller wants to add without inducing overflow
- and ALIGN is the known alignment of the value in bytes. */
+/* Try to match TOKENS against a series of opcode entries, starting at FIRST.
+ Return true if a definite match or failure was found, storing any match
+ in INSN. OPCODE_EXTRA is a value that should be ORed into the opcode
+ (to handle things like VU0 suffixes). LAX_MATCH is true if we have already
+ tried and failed to match under normal conditions and now want to try a
+ more relaxed match. */
static bfd_boolean
-small_offset_p (unsigned int range, unsigned int align, unsigned int offbits)
+match_insns (struct mips_cl_insn *insn, const struct mips_opcode *first,
+ const struct mips_opcode *past, struct mips_operand_token *tokens,
+ int opcode_extra, bfd_boolean lax_match)
{
- if (offbits == 16)
+ const struct mips_opcode *opcode;
+ const struct mips_opcode *invalid_delay_slot;
+ bfd_boolean seen_valid_for_isa, seen_valid_for_size;
+
+ /* Search for a match, ignoring alternatives that don't satisfy the
+ current ISA or forced_length. */
+ invalid_delay_slot = 0;
+ seen_valid_for_isa = FALSE;
+ seen_valid_for_size = FALSE;
+ opcode = first;
+ do
{
- /* Accept any relocation operator if overflow isn't a concern. */
- if (range < align && *offset_reloc != BFD_RELOC_UNUSED)
- return TRUE;
+ gas_assert (strcmp (opcode->name, first->name) == 0);
+ if (is_opcode_valid (opcode))
+ {
+ seen_valid_for_isa = TRUE;
+ if (is_size_valid (opcode))
+ {
+ bfd_boolean delay_slot_ok;
- /* These relocations are guaranteed not to overflow in correct links. */
- if (*offset_reloc == BFD_RELOC_MIPS_LITERAL
- || gprel16_reloc_p (*offset_reloc))
- return TRUE;
+ seen_valid_for_size = TRUE;
+ delay_slot_ok = is_delay_slot_valid (opcode);
+ if (match_insn (insn, opcode, tokens, opcode_extra,
+ lax_match, delay_slot_ok))
+ {
+ if (!delay_slot_ok)
+ {
+ if (!invalid_delay_slot)
+ invalid_delay_slot = opcode;
+ }
+ else
+ return TRUE;
+ }
+ }
+ }
+ ++opcode;
}
- if (offset_expr.X_op == O_constant
- && offset_high_part (offset_expr.X_add_number, offbits) == 0
- && offset_high_part (offset_expr.X_add_number + range, offbits) == 0)
- return TRUE;
- return FALSE;
-}
-
-/*
- * Build macros
- * This routine implements the seemingly endless macro or synthesized
- * instructions and addressing modes in the mips assembly language. Many
- * of these macros are simple and are similar to each other. These could
- * probably be handled by some kind of table or grammar approach instead of
- * this verbose method. Others are not simple macros but are more like
- * optimizing code generation.
- * One interesting optimization is when several store macros appear
- * consecutively that would load AT with the upper half of the same address.
- * The ensuing load upper instructions are ommited. This implies some kind
- * of global optimization. We currently only optimize within a single macro.
- * For many of the load and store macros if the address is specified as a
- * constant expression in the first 64k of memory (ie ld $2,0x4000c) we
- * first load register 'at' with zero and use it as the base register. The
- * mips assembler simply uses register $zero. Just one tiny optimization
- * we're missing.
- */
-static void
-macro (struct mips_cl_insn *ip, char *str)
-{
- unsigned int treg, sreg, dreg, breg;
- unsigned int tempreg;
- int mask;
- int used_at = 0;
- expressionS label_expr;
- expressionS expr1;
- expressionS *ep;
- const char *s;
- const char *s2;
- const char *fmt;
- int likely = 0;
- int coproc = 0;
- int offbits = 16;
- int call = 0;
- int jals = 0;
- int dbl = 0;
- int imm = 0;
- int ust = 0;
- int lp = 0;
- bfd_boolean large_offset;
- int off;
- int hold_mips_optimize;
- unsigned int align;
-
- gas_assert (! mips_opts.mips16);
-
- treg = EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
- dreg = EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
- sreg = breg = EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
- mask = ip->insn_mo->mask;
-
- label_expr.X_op = O_constant;
- label_expr.X_op_symbol = NULL;
- label_expr.X_add_symbol = NULL;
- label_expr.X_add_number = 0;
-
- expr1.X_op = O_constant;
- expr1.X_op_symbol = NULL;
- expr1.X_add_symbol = NULL;
- expr1.X_add_number = 1;
- align = 1;
+ while (opcode < past && strcmp (opcode->name, first->name) == 0);
- switch (mask)
+ /* If the only matches we found had the wrong length for the delay slot,
+ pick the first such match. We'll issue an appropriate warning later. */
+ if (invalid_delay_slot)
{
- case M_DABS:
- dbl = 1;
- case M_ABS:
- /* bgez $a0,1f
- move v0,$a0
- sub v0,$zero,$a0
- 1:
- */
+ if (match_insn (insn, invalid_delay_slot, tokens, opcode_extra,
+ lax_match, TRUE))
+ return TRUE;
+ abort ();
+ }
- start_noreorder ();
+ /* Handle the case where we didn't try to match an instruction because
+ all the alternatives were incompatible with the current ISA. */
+ if (!seen_valid_for_isa)
+ {
+ match_invalid_for_isa ();
+ return TRUE;
+ }
- if (mips_opts.micromips)
- micromips_label_expr (&label_expr);
- else
- label_expr.X_add_number = 8;
- macro_build (&label_expr, "bgez", "s,p", sreg);
- if (dreg == sreg)
- macro_build (NULL, "nop", "");
+ /* Handle the case where we didn't try to match an instruction because
+ all the alternatives were of the wrong size. */
+ if (!seen_valid_for_size)
+ {
+ if (mips_opts.insn32)
+ set_insn_error (0, _("opcode not supported in the `insn32' mode"));
else
- move_register (dreg, sreg);
- macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", dreg, 0, sreg);
- if (mips_opts.micromips)
- micromips_add_label ();
+ set_insn_error_i
+ (0, _("unrecognized %d-bit version of microMIPS opcode"),
+ 8 * forced_insn_length);
+ return TRUE;
+ }
- end_noreorder ();
- break;
+ return FALSE;
+}
- case M_ADD_I:
- s = "addi";
- s2 = "add";
- goto do_addi;
- case M_ADDU_I:
- s = "addiu";
- s2 = "addu";
- goto do_addi;
- case M_DADD_I:
- dbl = 1;
- s = "daddi";
- s2 = "dadd";
- if (!mips_opts.micromips)
- goto do_addi;
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x200
- && imm_expr.X_add_number < 0x200)
- {
- macro_build (NULL, s, "t,r,.", treg, sreg, imm_expr.X_add_number);
- break;
- }
- goto do_addi_i;
- case M_DADDU_I:
- dbl = 1;
- s = "daddiu";
- s2 = "daddu";
- do_addi:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
- && imm_expr.X_add_number < 0x8000)
- {
- macro_build (&imm_expr, s, "t,r,j", treg, sreg, BFD_RELOC_LO16);
- break;
- }
- do_addi_i:
- used_at = 1;
- load_register (AT, &imm_expr, dbl);
- macro_build (NULL, s2, "d,v,t", treg, sreg, AT);
- break;
+/* Like match_insns, but for MIPS16. */
- case M_AND_I:
- s = "andi";
- s2 = "and";
- goto do_bit;
- case M_OR_I:
- s = "ori";
- s2 = "or";
- goto do_bit;
- case M_NOR_I:
- s = "";
- s2 = "nor";
- goto do_bit;
- case M_XOR_I:
- s = "xori";
- s2 = "xor";
- do_bit:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= 0
- && imm_expr.X_add_number < 0x10000)
+static bfd_boolean
+match_mips16_insns (struct mips_cl_insn *insn, const struct mips_opcode *first,
+ struct mips_operand_token *tokens)
+{
+ const struct mips_opcode *opcode;
+ bfd_boolean seen_valid_for_isa;
+
+ /* Search for a match, ignoring alternatives that don't satisfy the
+ current ISA. There are no separate entries for extended forms so
+ we deal with forced_length later. */
+ seen_valid_for_isa = FALSE;
+ opcode = first;
+ do
+ {
+ gas_assert (strcmp (opcode->name, first->name) == 0);
+ if (is_opcode_valid_16 (opcode))
{
- if (mask != M_NOR_I)
- macro_build (&imm_expr, s, "t,r,i", treg, sreg, BFD_RELOC_LO16);
- else
- {
- macro_build (&imm_expr, "ori", "t,r,i",
- treg, sreg, BFD_RELOC_LO16);
- macro_build (NULL, "nor", "d,v,t", treg, treg, 0);
- }
- break;
+ seen_valid_for_isa = TRUE;
+ if (match_mips16_insn (insn, opcode, tokens))
+ return TRUE;
}
+ ++opcode;
+ }
+ while (opcode < &mips16_opcodes[bfd_mips16_num_opcodes]
+ && strcmp (opcode->name, first->name) == 0);
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s2, "d,v,t", treg, sreg, AT);
- break;
+ /* Handle the case where we didn't try to match an instruction because
+ all the alternatives were incompatible with the current ISA. */
+ if (!seen_valid_for_isa)
+ {
+ match_invalid_for_isa ();
+ return TRUE;
+ }
- case M_BALIGN:
- switch (imm_expr.X_add_number)
- {
- case 0:
- macro_build (NULL, "nop", "");
- break;
- case 2:
- macro_build (NULL, "packrl.ph", "d,s,t", treg, treg, sreg);
- break;
- case 1:
- case 3:
- macro_build (NULL, "balign", "t,s,2", treg, sreg,
- (int) imm_expr.X_add_number);
- break;
- default:
- as_bad (_("BALIGN immediate not 0, 1, 2 or 3 (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- break;
- }
- break;
+ return FALSE;
+}
- case M_BC1FL:
- case M_BC1TL:
- case M_BC2FL:
- case M_BC2TL:
- gas_assert (mips_opts.micromips);
- macro_build_branch_ccl (mask, &offset_expr,
- EXTRACT_OPERAND (1, BCC, *ip));
- break;
+/* Set up global variables for the start of a new macro. */
- case M_BEQ_I:
- case M_BEQL_I:
- case M_BNE_I:
- case M_BNEL_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- treg = 0;
- else
- {
- treg = AT;
- used_at = 1;
- load_register (treg, &imm_expr, HAVE_64BIT_GPRS);
- }
- /* Fall through. */
- case M_BEQL:
- case M_BNEL:
- macro_build_branch_rsrt (mask, &offset_expr, sreg, treg);
+static void
+macro_start (void)
+{
+ memset (&mips_macro_warning.sizes, 0, sizeof (mips_macro_warning.sizes));
+ memset (&mips_macro_warning.first_insn_sizes, 0,
+ sizeof (mips_macro_warning.first_insn_sizes));
+ memset (&mips_macro_warning.insns, 0, sizeof (mips_macro_warning.insns));
+ mips_macro_warning.delay_slot_p = (mips_opts.noreorder
+ && delayed_branch_p (&history[0]));
+ switch (history[0].insn_mo->pinfo2
+ & (INSN2_BRANCH_DELAY_32BIT | INSN2_BRANCH_DELAY_16BIT))
+ {
+ case INSN2_BRANCH_DELAY_32BIT:
+ mips_macro_warning.delay_slot_length = 4;
break;
-
- case M_BGEL:
- likely = 1;
- case M_BGE:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, treg);
- else
- {
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, AT, ZERO);
- }
+ case INSN2_BRANCH_DELAY_16BIT:
+ mips_macro_warning.delay_slot_length = 2;
break;
-
- case M_BGEZL:
- case M_BGEZALL:
- case M_BGTZL:
- case M_BLEZL:
- case M_BLTZL:
- case M_BLTZALL:
- macro_build_branch_rs (mask, &offset_expr, sreg);
+ default:
+ mips_macro_warning.delay_slot_length = 0;
break;
+ }
+ mips_macro_warning.first_frag = NULL;
+}
- case M_BGTL_I:
- likely = 1;
- case M_BGT_I:
- /* Check for > max integer. */
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number >= GPR_SMAX)
- {
- do_false:
- /* Result is always false. */
- if (! likely)
- macro_build (NULL, "nop", "");
- else
- macro_build_branch_rsrt (M_BNEL, &offset_expr, ZERO, ZERO);
- break;
- }
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- ++imm_expr.X_add_number;
- /* FALLTHROUGH */
- case M_BGE_I:
- case M_BGEL_I:
- if (mask == M_BGEL_I)
- likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- {
- macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ,
- &offset_expr, sreg);
- break;
- }
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
- {
- macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ,
- &offset_expr, sreg);
- break;
- }
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number <= GPR_SMIN)
- {
- do_true:
- /* result is always true */
- as_warn (_("Branch %s is always true"), ip->insn_mo->name);
- macro_build (&offset_expr, "b", "p");
- break;
- }
- used_at = 1;
- set_at (sreg, 0);
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, AT, ZERO);
- break;
-
- case M_BGEUL:
- likely = 1;
- case M_BGEU:
- if (treg == 0)
- goto do_true;
- else if (sreg == 0)
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, ZERO, treg);
- else
- {
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, AT, ZERO);
- }
- break;
+/* Given that a macro is longer than one instruction or of the wrong size,
+ return the appropriate warning for it. Return null if no warning is
+ needed. SUBTYPE is a bitmask of RELAX_DELAY_SLOT, RELAX_DELAY_SLOT_16BIT,
+ RELAX_DELAY_SLOT_SIZE_FIRST, RELAX_DELAY_SLOT_SIZE_SECOND,
+ and RELAX_NOMACRO. */
- case M_BGTUL_I:
- likely = 1;
- case M_BGTU_I:
- if (sreg == 0
- || (HAVE_32BIT_GPRS
- && imm_expr.X_op == O_constant
- && imm_expr.X_add_number == -1))
- goto do_false;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- ++imm_expr.X_add_number;
- /* FALLTHROUGH */
- case M_BGEU_I:
- case M_BGEUL_I:
- if (mask == M_BGEUL_I)
- likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- goto do_true;
- else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, sreg, ZERO);
- else
- {
- used_at = 1;
- set_at (sreg, 1);
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, AT, ZERO);
- }
- break;
+static const char *
+macro_warning (relax_substateT subtype)
+{
+ if (subtype & RELAX_DELAY_SLOT)
+ return _("macro instruction expanded into multiple instructions"
+ " in a branch delay slot");
+ else if (subtype & RELAX_NOMACRO)
+ return _("macro instruction expanded into multiple instructions");
+ else if (subtype & (RELAX_DELAY_SLOT_SIZE_FIRST
+ | RELAX_DELAY_SLOT_SIZE_SECOND))
+ return ((subtype & RELAX_DELAY_SLOT_16BIT)
+ ? _("macro instruction expanded into a wrong size instruction"
+ " in a 16-bit branch delay slot")
+ : _("macro instruction expanded into a wrong size instruction"
+ " in a 32-bit branch delay slot"));
+ else
+ return 0;
+}
- case M_BGTL:
- likely = 1;
- case M_BGT:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, treg);
- else
- {
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, AT, ZERO);
- }
- break;
+/* Finish up a macro. Emit warnings as appropriate. */
- case M_BGTUL:
- likely = 1;
- case M_BGTU:
- if (treg == 0)
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, sreg, ZERO);
- else if (sreg == 0)
- goto do_false;
- else
- {
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, AT, ZERO);
- }
- break;
+static void
+macro_end (void)
+{
+ /* Relaxation warning flags. */
+ relax_substateT subtype = 0;
- case M_BLEL:
- likely = 1;
- case M_BLE:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, treg);
- else
- {
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, AT, ZERO);
- }
- break;
+ /* Check delay slot size requirements. */
+ if (mips_macro_warning.delay_slot_length == 2)
+ subtype |= RELAX_DELAY_SLOT_16BIT;
+ if (mips_macro_warning.delay_slot_length != 0)
+ {
+ if (mips_macro_warning.delay_slot_length
+ != mips_macro_warning.first_insn_sizes[0])
+ subtype |= RELAX_DELAY_SLOT_SIZE_FIRST;
+ if (mips_macro_warning.delay_slot_length
+ != mips_macro_warning.first_insn_sizes[1])
+ subtype |= RELAX_DELAY_SLOT_SIZE_SECOND;
+ }
- case M_BLEL_I:
- likely = 1;
- case M_BLE_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number >= GPR_SMAX)
- goto do_true;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- ++imm_expr.X_add_number;
- /* FALLTHROUGH */
- case M_BLT_I:
- case M_BLTL_I:
- if (mask == M_BLTL_I)
- likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, sreg);
- else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
- macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, sreg);
- else
- {
- used_at = 1;
- set_at (sreg, 0);
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, AT, ZERO);
- }
- break;
+ /* Check instruction count requirements. */
+ if (mips_macro_warning.insns[0] > 1 || mips_macro_warning.insns[1] > 1)
+ {
+ if (mips_macro_warning.insns[1] > mips_macro_warning.insns[0])
+ subtype |= RELAX_SECOND_LONGER;
+ if (mips_opts.warn_about_macros)
+ subtype |= RELAX_NOMACRO;
+ if (mips_macro_warning.delay_slot_p)
+ subtype |= RELAX_DELAY_SLOT;
+ }
- case M_BLEUL:
- likely = 1;
- case M_BLEU:
- if (treg == 0)
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, sreg, ZERO);
- else if (sreg == 0)
- goto do_true;
- else
- {
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, AT, ZERO);
- }
- break;
+ /* If both alternatives fail to fill a delay slot correctly,
+ emit the warning now. */
+ if ((subtype & RELAX_DELAY_SLOT_SIZE_FIRST) != 0
+ && (subtype & RELAX_DELAY_SLOT_SIZE_SECOND) != 0)
+ {
+ relax_substateT s;
+ const char *msg;
- case M_BLEUL_I:
- likely = 1;
- case M_BLEU_I:
- if (sreg == 0
- || (HAVE_32BIT_GPRS
- && imm_expr.X_op == O_constant
- && imm_expr.X_add_number == -1))
- goto do_true;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- ++imm_expr.X_add_number;
- /* FALLTHROUGH */
- case M_BLTU_I:
- case M_BLTUL_I:
- if (mask == M_BLTUL_I)
- likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- goto do_false;
- else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
- macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, sreg, ZERO);
- else
- {
- used_at = 1;
- set_at (sreg, 1);
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, AT, ZERO);
- }
- break;
+ s = subtype & (RELAX_DELAY_SLOT_16BIT
+ | RELAX_DELAY_SLOT_SIZE_FIRST
+ | RELAX_DELAY_SLOT_SIZE_SECOND);
+ msg = macro_warning (s);
+ if (msg != NULL)
+ as_warn ("%s", msg);
+ subtype &= ~s;
+ }
- case M_BLTL:
- likely = 1;
- case M_BLT:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, treg);
- else
- {
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, AT, ZERO);
- }
- break;
+ /* If both implementations are longer than 1 instruction, then emit the
+ warning now. */
+ if (mips_macro_warning.insns[0] > 1 && mips_macro_warning.insns[1] > 1)
+ {
+ relax_substateT s;
+ const char *msg;
- case M_BLTUL:
- likely = 1;
- case M_BLTU:
- if (treg == 0)
- goto do_false;
- else if (sreg == 0)
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, ZERO, treg);
- else
- {
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
- macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, AT, ZERO);
- }
- break;
+ s = subtype & (RELAX_SECOND_LONGER | RELAX_NOMACRO | RELAX_DELAY_SLOT);
+ msg = macro_warning (s);
+ if (msg != NULL)
+ as_warn ("%s", msg);
+ subtype &= ~s;
+ }
- case M_DEXT:
- {
- /* Use unsigned arithmetic. */
- addressT pos;
- addressT size;
+ /* If any flags still set, then one implementation might need a warning
+ and the other either will need one of a different kind or none at all.
+ Pass any remaining flags over to relaxation. */
+ if (mips_macro_warning.first_frag != NULL)
+ mips_macro_warning.first_frag->fr_subtype |= subtype;
+}
- if (imm_expr.X_op != O_constant || imm2_expr.X_op != O_constant)
- {
- as_bad (_("Unsupported large constant"));
- pos = size = 1;
- }
- else
- {
- pos = imm_expr.X_add_number;
- size = imm2_expr.X_add_number;
- }
+/* Instruction operand formats used in macros that vary between
+ standard MIPS and microMIPS code. */
- if (pos > 63)
- {
- as_bad (_("Improper position (%lu)"), (unsigned long) pos);
- pos = 1;
- }
- if (size == 0 || size > 64 || (pos + size - 1) > 63)
- {
- as_bad (_("Improper extract size (%lu, position %lu)"),
- (unsigned long) size, (unsigned long) pos);
- size = 1;
- }
+static const char * const brk_fmt[2][2] = { { "c", "c" }, { "mF", "c" } };
+static const char * const cop12_fmt[2] = { "E,o(b)", "E,~(b)" };
+static const char * const jalr_fmt[2] = { "d,s", "t,s" };
+static const char * const lui_fmt[2] = { "t,u", "s,u" };
+static const char * const mem12_fmt[2] = { "t,o(b)", "t,~(b)" };
+static const char * const mfhl_fmt[2][2] = { { "d", "d" }, { "mj", "s" } };
+static const char * const shft_fmt[2] = { "d,w,<", "t,r,<" };
+static const char * const trap_fmt[2] = { "s,t,q", "s,t,|" };
- if (size <= 32 && pos < 32)
- {
- s = "dext";
- fmt = "t,r,+A,+C";
- }
- else if (size <= 32)
- {
- s = "dextu";
- fmt = "t,r,+E,+H";
- }
- else
- {
- s = "dextm";
- fmt = "t,r,+A,+G";
- }
- macro_build ((expressionS *) NULL, s, fmt, treg, sreg, (int) pos,
- (int) (size - 1));
- }
- break;
+#define BRK_FMT (brk_fmt[mips_opts.micromips][mips_opts.insn32])
+#define COP12_FMT (cop12_fmt[mips_opts.micromips])
+#define JALR_FMT (jalr_fmt[mips_opts.micromips])
+#define LUI_FMT (lui_fmt[mips_opts.micromips])
+#define MEM12_FMT (mem12_fmt[mips_opts.micromips])
+#define MFHL_FMT (mfhl_fmt[mips_opts.micromips][mips_opts.insn32])
+#define SHFT_FMT (shft_fmt[mips_opts.micromips])
+#define TRAP_FMT (trap_fmt[mips_opts.micromips])
- case M_DINS:
- {
- /* Use unsigned arithmetic. */
- addressT pos;
- addressT size;
+/* Read a macro's relocation codes from *ARGS and store them in *R.
+ The first argument in *ARGS will be either the code for a single
+ relocation or -1 followed by the three codes that make up a
+ composite relocation. */
- if (imm_expr.X_op != O_constant || imm2_expr.X_op != O_constant)
- {
- as_bad (_("Unsupported large constant"));
- pos = size = 1;
- }
- else
- {
- pos = imm_expr.X_add_number;
- size = imm2_expr.X_add_number;
- }
+static void
+macro_read_relocs (va_list *args, bfd_reloc_code_real_type *r)
+{
+ int i, next;
- if (pos > 63)
- {
- as_bad (_("Improper position (%lu)"), (unsigned long) pos);
- pos = 1;
- }
- if (size == 0 || size > 64 || (pos + size - 1) > 63)
- {
- as_bad (_("Improper insert size (%lu, position %lu)"),
- (unsigned long) size, (unsigned long) pos);
- size = 1;
- }
+ next = va_arg (*args, int);
+ if (next >= 0)
+ r[0] = (bfd_reloc_code_real_type) next;
+ else
+ {
+ for (i = 0; i < 3; i++)
+ r[i] = (bfd_reloc_code_real_type) va_arg (*args, int);
+ /* This function is only used for 16-bit relocation fields.
+ To make the macro code simpler, treat an unrelocated value
+ in the same way as BFD_RELOC_LO16. */
+ if (r[0] == BFD_RELOC_UNUSED)
+ r[0] = BFD_RELOC_LO16;
+ }
+}
- if (pos < 32 && (pos + size - 1) < 32)
- {
- s = "dins";
- fmt = "t,r,+A,+B";
- }
- else if (pos >= 32)
- {
- s = "dinsu";
- fmt = "t,r,+E,+F";
- }
- else
- {
- s = "dinsm";
- fmt = "t,r,+A,+F";
- }
- macro_build ((expressionS *) NULL, s, fmt, treg, sreg, (int) pos,
- (int) (pos + size - 1));
- }
- break;
+/* Build an instruction created by a macro expansion. This is passed
+ a pointer to the count of instructions created so far, an
+ expression, the name of the instruction to build, an operand format
+ string, and corresponding arguments. */
- case M_DDIV_3:
- dbl = 1;
- case M_DIV_3:
- s = "mflo";
- goto do_div3;
- case M_DREM_3:
- dbl = 1;
- case M_REM_3:
- s = "mfhi";
- do_div3:
- if (treg == 0)
- {
- as_warn (_("Divide by zero."));
- if (mips_trap)
- macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
- else
- macro_build (NULL, "break", BRK_FMT, 7);
- break;
- }
+static void
+macro_build (expressionS *ep, const char *name, const char *fmt, ...)
+{
+ const struct mips_opcode *mo = NULL;
+ bfd_reloc_code_real_type r[3];
+ const struct mips_opcode *amo;
+ const struct mips_operand *operand;
+ struct hash_control *hash;
+ struct mips_cl_insn insn;
+ va_list args;
+ unsigned int uval;
- start_noreorder ();
- if (mips_trap)
- {
- macro_build (NULL, "teq", TRAP_FMT, treg, ZERO, 7);
- macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", sreg, treg);
- }
- else
- {
- if (mips_opts.micromips)
- micromips_label_expr (&label_expr);
- else
- label_expr.X_add_number = 8;
- macro_build (&label_expr, "bne", "s,t,p", treg, ZERO);
- macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", sreg, treg);
- macro_build (NULL, "break", BRK_FMT, 7);
- if (mips_opts.micromips)
- micromips_add_label ();
- }
- expr1.X_add_number = -1;
- used_at = 1;
- load_register (AT, &expr1, dbl);
- if (mips_opts.micromips)
- micromips_label_expr (&label_expr);
- else
- label_expr.X_add_number = mips_trap ? (dbl ? 12 : 8) : (dbl ? 20 : 16);
- macro_build (&label_expr, "bne", "s,t,p", treg, AT);
- if (dbl)
- {
- expr1.X_add_number = 1;
- load_register (AT, &expr1, dbl);
- macro_build (NULL, "dsll32", SHFT_FMT, AT, AT, 31);
- }
- else
- {
- expr1.X_add_number = 0x80000000;
- macro_build (&expr1, "lui", LUI_FMT, AT, BFD_RELOC_HI16);
- }
- if (mips_trap)
- {
- macro_build (NULL, "teq", TRAP_FMT, sreg, AT, 6);
- /* We want to close the noreorder block as soon as possible, so
- that later insns are available for delay slot filling. */
- end_noreorder ();
- }
- else
- {
- if (mips_opts.micromips)
- micromips_label_expr (&label_expr);
- else
- label_expr.X_add_number = 8;
- macro_build (&label_expr, "bne", "s,t,p", sreg, AT);
- macro_build (NULL, "nop", "");
+ va_start (args, fmt);
- /* We want to close the noreorder block as soon as possible, so
- that later insns are available for delay slot filling. */
- end_noreorder ();
+ if (mips_opts.mips16)
+ {
+ mips16_macro_build (ep, name, fmt, &args);
+ va_end (args);
+ return;
+ }
- macro_build (NULL, "break", BRK_FMT, 6);
- }
- if (mips_opts.micromips)
- micromips_add_label ();
- macro_build (NULL, s, MFHL_FMT, dreg);
- break;
+ r[0] = BFD_RELOC_UNUSED;
+ r[1] = BFD_RELOC_UNUSED;
+ r[2] = BFD_RELOC_UNUSED;
+ hash = mips_opts.micromips ? micromips_op_hash : op_hash;
+ amo = (struct mips_opcode *) hash_find (hash, name);
+ gas_assert (amo);
+ gas_assert (strcmp (name, amo->name) == 0);
- case M_DIV_3I:
- s = "div";
- s2 = "mflo";
- goto do_divi;
- case M_DIVU_3I:
- s = "divu";
- s2 = "mflo";
- goto do_divi;
- case M_REM_3I:
- s = "div";
- s2 = "mfhi";
- goto do_divi;
- case M_REMU_3I:
- s = "divu";
- s2 = "mfhi";
- goto do_divi;
- case M_DDIV_3I:
- dbl = 1;
- s = "ddiv";
- s2 = "mflo";
- goto do_divi;
- case M_DDIVU_3I:
- dbl = 1;
- s = "ddivu";
- s2 = "mflo";
- goto do_divi;
- case M_DREM_3I:
- dbl = 1;
- s = "ddiv";
- s2 = "mfhi";
- goto do_divi;
- case M_DREMU_3I:
- dbl = 1;
- s = "ddivu";
- s2 = "mfhi";
- do_divi:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- {
- as_warn (_("Divide by zero."));
- if (mips_trap)
- macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
- else
- macro_build (NULL, "break", BRK_FMT, 7);
- break;
- }
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
- {
- if (strcmp (s2, "mflo") == 0)
- move_register (dreg, sreg);
- else
- move_register (dreg, ZERO);
- break;
- }
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number == -1
- && s[strlen (s) - 1] != 'u')
+ do
+ {
+ /* Search until we get a match for NAME. It is assumed here that
+ macros will never generate MDMX, MIPS-3D, or MT instructions.
+ We try to match an instruction that fulfils the branch delay
+ slot instruction length requirement (if any) of the previous
+ instruction. While doing this we record the first instruction
+ seen that matches all the other conditions and use it anyway
+ if the requirement cannot be met; we will issue an appropriate
+ warning later on. */
+ if (strcmp (fmt, amo->args) == 0
+ && amo->pinfo != INSN_MACRO
+ && is_opcode_valid (amo)
+ && is_size_valid (amo))
{
- if (strcmp (s2, "mflo") == 0)
+ if (is_delay_slot_valid (amo))
{
- macro_build (NULL, dbl ? "dneg" : "neg", "d,w", dreg, sreg);
+ mo = amo;
+ break;
}
- else
- move_register (dreg, ZERO);
- break;
+ else if (!mo)
+ mo = amo;
}
- used_at = 1;
- load_register (AT, &imm_expr, dbl);
- macro_build (NULL, s, "z,s,t", sreg, AT);
- macro_build (NULL, s2, MFHL_FMT, dreg);
- break;
+ ++amo;
+ gas_assert (amo->name);
+ }
+ while (strcmp (name, amo->name) == 0);
- case M_DIVU_3:
- s = "divu";
- s2 = "mflo";
- goto do_divu3;
- case M_REMU_3:
- s = "divu";
- s2 = "mfhi";
- goto do_divu3;
- case M_DDIVU_3:
- s = "ddivu";
- s2 = "mflo";
- goto do_divu3;
- case M_DREMU_3:
- s = "ddivu";
- s2 = "mfhi";
- do_divu3:
- start_noreorder ();
- if (mips_trap)
- {
- macro_build (NULL, "teq", TRAP_FMT, treg, ZERO, 7);
- macro_build (NULL, s, "z,s,t", sreg, treg);
- /* We want to close the noreorder block as soon as possible, so
- that later insns are available for delay slot filling. */
- end_noreorder ();
- }
- else
+ gas_assert (mo);
+ create_insn (&insn, mo);
+ for (; *fmt; ++fmt)
+ {
+ switch (*fmt)
{
- if (mips_opts.micromips)
- micromips_label_expr (&label_expr);
- else
- label_expr.X_add_number = 8;
- macro_build (&label_expr, "bne", "s,t,p", treg, ZERO);
- macro_build (NULL, s, "z,s,t", sreg, treg);
+ case ',':
+ case '(':
+ case ')':
+ case 'z':
+ break;
- /* We want to close the noreorder block as soon as possible, so
- that later insns are available for delay slot filling. */
- end_noreorder ();
- macro_build (NULL, "break", BRK_FMT, 7);
- if (mips_opts.micromips)
- micromips_add_label ();
- }
- macro_build (NULL, s2, MFHL_FMT, dreg);
- break;
+ case 'i':
+ case 'j':
+ macro_read_relocs (&args, r);
+ gas_assert (*r == BFD_RELOC_GPREL16
+ || *r == BFD_RELOC_MIPS_HIGHER
+ || *r == BFD_RELOC_HI16_S
+ || *r == BFD_RELOC_LO16
+ || *r == BFD_RELOC_MIPS_GOT_OFST);
+ break;
- case M_DLCA_AB:
- dbl = 1;
- case M_LCA_AB:
- call = 1;
- goto do_la;
- case M_DLA_AB:
- dbl = 1;
- case M_LA_AB:
- do_la:
- /* Load the address of a symbol into a register. If breg is not
- zero, we then add a base register to it. */
+ case 'o':
+ macro_read_relocs (&args, r);
+ break;
- if (dbl && HAVE_32BIT_GPRS)
- as_warn (_("dla used to load 32-bit register"));
+ case 'u':
+ macro_read_relocs (&args, r);
+ gas_assert (ep != NULL
+ && (ep->X_op == O_constant
+ || (ep->X_op == O_symbol
+ && (*r == BFD_RELOC_MIPS_HIGHEST
+ || *r == BFD_RELOC_HI16_S
+ || *r == BFD_RELOC_HI16
+ || *r == BFD_RELOC_GPREL16
+ || *r == BFD_RELOC_MIPS_GOT_HI16
+ || *r == BFD_RELOC_MIPS_CALL_HI16))));
+ break;
- if (!dbl && HAVE_64BIT_OBJECTS)
- as_warn (_("la used to load 64-bit address"));
+ case 'p':
+ gas_assert (ep != NULL);
- if (small_offset_p (0, align, 16))
- {
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", treg, breg,
- -1, offset_reloc[0], offset_reloc[1], offset_reloc[2]);
+ /*
+ * This allows macro() to pass an immediate expression for
+ * creating short branches without creating a symbol.
+ *
+ * We don't allow branch relaxation for these branches, as
+ * they should only appear in ".set nomacro" anyway.
+ */
+ if (ep->X_op == O_constant)
+ {
+ /* For microMIPS we always use relocations for branches.
+ So we should not resolve immediate values. */
+ gas_assert (!mips_opts.micromips);
+
+ if ((ep->X_add_number & 3) != 0)
+ as_bad (_("branch to misaligned address (0x%lx)"),
+ (unsigned long) ep->X_add_number);
+ if ((ep->X_add_number + 0x20000) & ~0x3ffff)
+ as_bad (_("branch address range overflow (0x%lx)"),
+ (unsigned long) ep->X_add_number);
+ insn.insn_opcode |= (ep->X_add_number >> 2) & 0xffff;
+ ep = NULL;
+ }
+ else
+ *r = BFD_RELOC_16_PCREL_S2;
break;
- }
- if (mips_opts.at && (treg == breg))
- {
- tempreg = AT;
- used_at = 1;
- }
- else
- {
- tempreg = treg;
- }
+ case 'a':
+ gas_assert (ep != NULL);
+ *r = BFD_RELOC_MIPS_JMP;
+ break;
- if (offset_expr.X_op != O_symbol
- && offset_expr.X_op != O_constant)
- {
- as_bad (_("Expression too complex"));
- offset_expr.X_op = O_constant;
+ default:
+ operand = (mips_opts.micromips
+ ? decode_micromips_operand (fmt)
+ : decode_mips_operand (fmt));
+ if (!operand)
+ abort ();
+
+ uval = va_arg (args, int);
+ if (operand->type == OP_CLO_CLZ_DEST)
+ uval |= (uval << 5);
+ insn_insert_operand (&insn, operand, uval);
+
+ if (*fmt == '+' || *fmt == 'm')
+ ++fmt;
+ break;
}
+ }
+ va_end (args);
+ gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
- if (offset_expr.X_op == O_constant)
- load_register (tempreg, &offset_expr, HAVE_64BIT_ADDRESSES);
- else if (mips_pic == NO_PIC)
- {
- /* If this is a reference to a GP relative symbol, we want
- addiu $tempreg,$gp,<sym> (BFD_RELOC_GPREL16)
- Otherwise we want
- lui $tempreg,<sym> (BFD_RELOC_HI16_S)
- addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- If we have a constant, we need two instructions anyhow,
- so we may as well always use the latter form.
+ append_insn (&insn, ep, r, TRUE);
+}
- With 64bit address space and a usable $at we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- lui $at,<sym> (BFD_RELOC_HI16_S)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- daddiu $at,<sym> (BFD_RELOC_LO16)
- dsll32 $tempreg,0
- daddu $tempreg,$tempreg,$at
+static void
+mips16_macro_build (expressionS *ep, const char *name, const char *fmt,
+ va_list *args)
+{
+ struct mips_opcode *mo;
+ struct mips_cl_insn insn;
+ const struct mips_operand *operand;
+ bfd_reloc_code_real_type r[3]
+ = {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
- If $at is already in use, we use a path which is suboptimal
- on superscalar processors.
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- dsll $tempreg,16
- daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
- dsll $tempreg,16
- daddiu $tempreg,<sym> (BFD_RELOC_LO16)
+ mo = (struct mips_opcode *) hash_find (mips16_op_hash, name);
+ gas_assert (mo);
+ gas_assert (strcmp (name, mo->name) == 0);
- For GP relative symbols in 64bit address space we can use
- the same sequence as in 32bit address space. */
- if (HAVE_64BIT_SYMBOLS)
- {
- if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (offset_expr.X_add_symbol, 1))
- {
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, mips_gp_register, BFD_RELOC_GPREL16);
- relax_switch ();
- }
+ while (strcmp (fmt, mo->args) != 0 || mo->pinfo == INSN_MACRO)
+ {
+ ++mo;
+ gas_assert (mo->name);
+ gas_assert (strcmp (name, mo->name) == 0);
+ }
- if (used_at == 0 && mips_opts.at)
- {
- macro_build (&offset_expr, "lui", LUI_FMT,
- tempreg, BFD_RELOC_MIPS_HIGHEST);
- macro_build (&offset_expr, "lui", LUI_FMT,
- AT, BFD_RELOC_HI16_S);
- macro_build (&offset_expr, "daddiu", "t,r,j",
- tempreg, tempreg, BFD_RELOC_MIPS_HIGHER);
- macro_build (&offset_expr, "daddiu", "t,r,j",
- AT, AT, BFD_RELOC_LO16);
- macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0);
- macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT);
- used_at = 1;
- }
- else
- {
- macro_build (&offset_expr, "lui", LUI_FMT,
- tempreg, BFD_RELOC_MIPS_HIGHEST);
- macro_build (&offset_expr, "daddiu", "t,r,j",
- tempreg, tempreg, BFD_RELOC_MIPS_HIGHER);
- macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
- macro_build (&offset_expr, "daddiu", "t,r,j",
- tempreg, tempreg, BFD_RELOC_HI16_S);
- macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
- macro_build (&offset_expr, "daddiu", "t,r,j",
- tempreg, tempreg, BFD_RELOC_LO16);
- }
+ create_insn (&insn, mo);
+ for (; *fmt; ++fmt)
+ {
+ int c;
- if (mips_relax.sequence)
- relax_end ();
- }
- else
- {
- if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (offset_expr.X_add_symbol, 1))
- {
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, mips_gp_register, BFD_RELOC_GPREL16);
- relax_switch ();
- }
- if (!IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
- as_bad (_("Offset too large"));
- macro_build_lui (&offset_expr, tempreg);
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, tempreg, BFD_RELOC_LO16);
- if (mips_relax.sequence)
- relax_end ();
- }
- }
- else if (!mips_big_got && !HAVE_NEWABI)
+ c = *fmt;
+ switch (c)
{
- int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
-
- /* If this is a reference to an external symbol, and there
- is no constant, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- or for lca or if tempreg is PIC_CALL_REG
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
- For a local symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
+ case ',':
+ case '(':
+ case ')':
+ break;
- If we have a small constant, and this is a reference to
- an external symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $tempreg,$tempreg,<constant>
- For a local symbol, we want the same instruction
- sequence, but we output a BFD_RELOC_LO16 reloc on the
- addiu instruction.
+ case '0':
+ case 'S':
+ case 'P':
+ case 'R':
+ break;
- If we have a large constant, and this is a reference to
- an external symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- lui $at,<hiconstant>
- addiu $at,$at,<loconstant>
- addu $tempreg,$tempreg,$at
- For a local symbol, we want the same instruction
- sequence, but we output a BFD_RELOC_LO16 reloc on the
- addiu instruction.
- */
+ case '<':
+ case '>':
+ case '4':
+ case '5':
+ case 'H':
+ case 'W':
+ case 'D':
+ case 'j':
+ case '8':
+ case 'V':
+ case 'C':
+ case 'U':
+ case 'k':
+ case 'K':
+ case 'p':
+ case 'q':
+ {
+ offsetT value;
- if (offset_expr.X_add_number == 0)
- {
- if (mips_pic == SVR4_PIC
- && breg == 0
- && (call || tempreg == PIC_CALL_REG))
- lw_reloc_type = (int) BFD_RELOC_MIPS_CALL16;
+ gas_assert (ep != NULL);
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- lw_reloc_type, mips_gp_register);
- if (breg != 0)
- {
- /* We're going to put in an addu instruction using
- tempreg, so we may as well insert the nop right
- now. */
- load_delay_nop ();
- }
- relax_switch ();
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- tempreg, BFD_RELOC_MIPS_GOT16, mips_gp_register);
- load_delay_nop ();
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, tempreg, BFD_RELOC_LO16);
- relax_end ();
- /* FIXME: If breg == 0, and the next instruction uses
- $tempreg, then if this variant case is used an extra
- nop will be generated. */
- }
- else if (offset_expr.X_add_number >= -0x8000
- && offset_expr.X_add_number < 0x8000)
- {
- load_got_offset (tempreg, &offset_expr);
- load_delay_nop ();
- add_got_offset (tempreg, &offset_expr);
- }
- else
- {
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number =
- SEXT_16BIT (offset_expr.X_add_number);
- load_got_offset (tempreg, &offset_expr);
- offset_expr.X_add_number = expr1.X_add_number;
- /* If we are going to add in a base register, and the
- target register and the base register are the same,
- then we are using AT as a temporary register. Since
- we want to load the constant into AT, we add our
- current AT (from the global offset table) and the
- register into the register now, and pretend we were
- not using a base register. */
- if (breg == treg)
- {
- load_delay_nop ();
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- breg = 0;
- tempreg = treg;
- }
- add_got_offset_hilo (tempreg, &offset_expr, AT);
- used_at = 1;
- }
+ if (ep->X_op != O_constant)
+ *r = (int) BFD_RELOC_UNUSED + c;
+ else if (calculate_reloc (*r, ep->X_add_number, &value))
+ {
+ mips16_immed (NULL, 0, c, *r, value, 0, &insn.insn_opcode);
+ ep = NULL;
+ *r = BFD_RELOC_UNUSED;
+ }
+ }
+ break;
+
+ default:
+ operand = decode_mips16_operand (c, FALSE);
+ if (!operand)
+ abort ();
+
+ insn_insert_operand (&insn, operand, va_arg (*args, int));
+ break;
}
- else if (!mips_big_got && HAVE_NEWABI)
- {
- int add_breg_early = 0;
+ }
- /* If this is a reference to an external, and there is no
- constant, or local symbol (*), with or without a
- constant, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP)
- or for lca or if tempreg is PIC_CALL_REG
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
+ gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
- If we have a small constant, and this is a reference to
- an external symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP)
- addiu $tempreg,$tempreg,<constant>
+ append_insn (&insn, ep, r, TRUE);
+}
- If we have a large constant, and this is a reference to
- an external symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP)
- lui $at,<hiconstant>
- addiu $at,$at,<loconstant>
- addu $tempreg,$tempreg,$at
+/*
+ * Generate a "jalr" instruction with a relocation hint to the called
+ * function. This occurs in NewABI PIC code.
+ */
+static void
+macro_build_jalr (expressionS *ep, int cprestore)
+{
+ static const bfd_reloc_code_real_type jalr_relocs[2]
+ = { BFD_RELOC_MIPS_JALR, BFD_RELOC_MICROMIPS_JALR };
+ bfd_reloc_code_real_type jalr_reloc = jalr_relocs[mips_opts.micromips];
+ const char *jalr;
+ char *f = NULL;
- (*) Other assemblers seem to prefer GOT_PAGE/GOT_OFST for
- local symbols, even though it introduces an additional
- instruction. */
+ if (MIPS_JALR_HINT_P (ep))
+ {
+ frag_grow (8);
+ f = frag_more (0);
+ }
+ if (mips_opts.micromips)
+ {
+ jalr = ((mips_opts.noreorder && !cprestore) || mips_opts.insn32
+ ? "jalr" : "jalrs");
+ if (MIPS_JALR_HINT_P (ep)
+ || mips_opts.insn32
+ || (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, jalr, "t,s", RA, PIC_CALL_REG);
+ else
+ macro_build (NULL, jalr, "mj", PIC_CALL_REG);
+ }
+ else
+ macro_build (NULL, "jalr", "d,s", RA, PIC_CALL_REG);
+ if (MIPS_JALR_HINT_P (ep))
+ fix_new_exp (frag_now, f - frag_now->fr_literal, 4, ep, FALSE, jalr_reloc);
+}
- if (offset_expr.X_add_number)
- {
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number = 0;
+/*
+ * Generate a "lui" instruction.
+ */
+static void
+macro_build_lui (expressionS *ep, int regnum)
+{
+ gas_assert (! mips_opts.mips16);
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
+ if (ep->X_op != O_constant)
+ {
+ gas_assert (ep->X_op == O_symbol);
+ /* _gp_disp is a special case, used from s_cpload.
+ __gnu_local_gp is used if mips_no_shared. */
+ gas_assert (mips_pic == NO_PIC
+ || (! HAVE_NEWABI
+ && strcmp (S_GET_NAME (ep->X_add_symbol), "_gp_disp") == 0)
+ || (! mips_in_shared
+ && strcmp (S_GET_NAME (ep->X_add_symbol),
+ "__gnu_local_gp") == 0));
+ }
- if (expr1.X_add_number >= -0x8000
- && expr1.X_add_number < 0x8000)
- {
- macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, tempreg, BFD_RELOC_LO16);
- }
- else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
- {
- /* If we are going to add in a base register, and the
- target register and the base register are the same,
- then we are using AT as a temporary register. Since
- we want to load the constant into AT, we add our
- current AT (from the global offset table) and the
- register into the register now, and pretend we were
- not using a base register. */
- if (breg != treg)
- dreg = tempreg;
- else
- {
- gas_assert (tempreg == AT);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- dreg = treg;
- add_breg_early = 1;
- }
+ macro_build (ep, "lui", LUI_FMT, regnum, BFD_RELOC_HI16_S);
+}
- load_register (AT, &expr1, HAVE_64BIT_ADDRESSES);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- dreg, dreg, AT);
+/* Generate a sequence of instructions to do a load or store from a constant
+ offset off of a base register (breg) into/from a target register (treg),
+ using AT if necessary. */
+static void
+macro_build_ldst_constoffset (expressionS *ep, const char *op,
+ int treg, int breg, int dbl)
+{
+ gas_assert (ep->X_op == O_constant);
- used_at = 1;
- }
- else
- as_bad (_("PIC code offset overflow (max 32 signed bits)"));
+ /* Sign-extending 32-bit constants makes their handling easier. */
+ if (!dbl)
+ normalize_constant_expr (ep);
- relax_switch ();
- offset_expr.X_add_number = expr1.X_add_number;
+ /* Right now, this routine can only handle signed 32-bit constants. */
+ if (! IS_SEXT_32BIT_NUM(ep->X_add_number + 0x8000))
+ as_warn (_("operand overflow"));
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
- if (add_breg_early)
- {
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, tempreg, breg);
- breg = 0;
- tempreg = treg;
- }
- relax_end ();
- }
- else if (breg == 0 && (call || tempreg == PIC_CALL_REG))
- {
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_CALL16, mips_gp_register);
- relax_switch ();
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
- relax_end ();
- }
- else
- {
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
- }
- }
- else if (mips_big_got && !HAVE_NEWABI)
- {
- int gpdelay;
- int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16;
- int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16;
- int local_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
-
- /* This is the large GOT case. If this is a reference to an
- external symbol, and there is no constant, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- addu $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- or for lca or if tempreg is PIC_CALL_REG
- lui $tempreg,<sym> (BFD_RELOC_MIPS_CALL_HI16)
- addu $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_CALL_LO16)
- For a local symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
+ if (IS_SEXT_16BIT_NUM(ep->X_add_number))
+ {
+ /* Signed 16-bit offset will fit in the op. Easy! */
+ macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, breg);
+ }
+ else
+ {
+ /* 32-bit offset, need multiple instructions and AT, like:
+ lui $tempreg,const_hi (BFD_RELOC_HI16_S)
+ addu $tempreg,$tempreg,$breg
+ <op> $treg,const_lo($tempreg) (BFD_RELOC_LO16)
+ to handle the complete offset. */
+ macro_build_lui (ep, AT);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, AT, breg);
+ macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, AT);
- If we have a small constant, and this is a reference to
- an external symbol, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- addu $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- nop
- addiu $tempreg,$tempreg,<constant>
- For a local symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $tempreg,$tempreg,<constant> (BFD_RELOC_LO16)
+ if (!mips_opts.at)
+ as_bad (_("macro used $at after \".set noat\""));
+ }
+}
- If we have a large constant, and this is a reference to
- an external symbol, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- addu $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- lui $at,<hiconstant>
- addiu $at,$at,<loconstant>
- addu $tempreg,$tempreg,$at
- For a local symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- lui $at,<hiconstant>
- addiu $at,$at,<loconstant> (BFD_RELOC_LO16)
- addu $tempreg,$tempreg,$at
- */
+/* set_at()
+ * Generates code to set the $at register to true (one)
+ * if reg is less than the immediate expression.
+ */
+static void
+set_at (int reg, int unsignedp)
+{
+ if (imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
+ macro_build (&imm_expr, unsignedp ? "sltiu" : "slti", "t,r,j",
+ AT, reg, BFD_RELOC_LO16);
+ else
+ {
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, unsignedp ? "sltu" : "slt", "d,v,t", AT, reg, AT);
+ }
+}
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number = 0;
- relax_start (offset_expr.X_add_symbol);
- gpdelay = reg_needs_delay (mips_gp_register);
- if (expr1.X_add_number == 0 && breg == 0
- && (call || tempreg == PIC_CALL_REG))
- {
- lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16;
- lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16;
- }
- macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, mips_gp_register);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- tempreg, lw_reloc_type, tempreg);
- if (expr1.X_add_number == 0)
- {
- if (breg != 0)
- {
- /* We're going to put in an addu instruction using
- tempreg, so we may as well insert the nop right
- now. */
- load_delay_nop ();
- }
- }
- else if (expr1.X_add_number >= -0x8000
- && expr1.X_add_number < 0x8000)
- {
- load_delay_nop ();
- macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, tempreg, BFD_RELOC_LO16);
- }
- else
- {
- /* If we are going to add in a base register, and the
- target register and the base register are the same,
- then we are using AT as a temporary register. Since
- we want to load the constant into AT, we add our
- current AT (from the global offset table) and the
- register into the register now, and pretend we were
- not using a base register. */
- if (breg != treg)
- dreg = tempreg;
- else
- {
- gas_assert (tempreg == AT);
- load_delay_nop ();
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- dreg = treg;
- }
+/* Count the leading zeroes by performing a binary chop. This is a
+ bulky bit of source, but performance is a LOT better for the
+ majority of values than a simple loop to count the bits:
+ for (lcnt = 0; (lcnt < 32); lcnt++)
+ if ((v) & (1 << (31 - lcnt)))
+ break;
+ However it is not code size friendly, and the gain will drop a bit
+ on certain cached systems.
+*/
+#define COUNT_TOP_ZEROES(v) \
+ (((v) & ~0xffff) == 0 \
+ ? ((v) & ~0xff) == 0 \
+ ? ((v) & ~0xf) == 0 \
+ ? ((v) & ~0x3) == 0 \
+ ? ((v) & ~0x1) == 0 \
+ ? !(v) \
+ ? 32 \
+ : 31 \
+ : 30 \
+ : ((v) & ~0x7) == 0 \
+ ? 29 \
+ : 28 \
+ : ((v) & ~0x3f) == 0 \
+ ? ((v) & ~0x1f) == 0 \
+ ? 27 \
+ : 26 \
+ : ((v) & ~0x7f) == 0 \
+ ? 25 \
+ : 24 \
+ : ((v) & ~0xfff) == 0 \
+ ? ((v) & ~0x3ff) == 0 \
+ ? ((v) & ~0x1ff) == 0 \
+ ? 23 \
+ : 22 \
+ : ((v) & ~0x7ff) == 0 \
+ ? 21 \
+ : 20 \
+ : ((v) & ~0x3fff) == 0 \
+ ? ((v) & ~0x1fff) == 0 \
+ ? 19 \
+ : 18 \
+ : ((v) & ~0x7fff) == 0 \
+ ? 17 \
+ : 16 \
+ : ((v) & ~0xffffff) == 0 \
+ ? ((v) & ~0xfffff) == 0 \
+ ? ((v) & ~0x3ffff) == 0 \
+ ? ((v) & ~0x1ffff) == 0 \
+ ? 15 \
+ : 14 \
+ : ((v) & ~0x7ffff) == 0 \
+ ? 13 \
+ : 12 \
+ : ((v) & ~0x3fffff) == 0 \
+ ? ((v) & ~0x1fffff) == 0 \
+ ? 11 \
+ : 10 \
+ : ((v) & ~0x7fffff) == 0 \
+ ? 9 \
+ : 8 \
+ : ((v) & ~0xfffffff) == 0 \
+ ? ((v) & ~0x3ffffff) == 0 \
+ ? ((v) & ~0x1ffffff) == 0 \
+ ? 7 \
+ : 6 \
+ : ((v) & ~0x7ffffff) == 0 \
+ ? 5 \
+ : 4 \
+ : ((v) & ~0x3fffffff) == 0 \
+ ? ((v) & ~0x1fffffff) == 0 \
+ ? 3 \
+ : 2 \
+ : ((v) & ~0x7fffffff) == 0 \
+ ? 1 \
+ : 0)
- load_register (AT, &expr1, HAVE_64BIT_ADDRESSES);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dreg, dreg, AT);
+/* load_register()
+ * This routine generates the least number of instructions necessary to load
+ * an absolute expression value into a register.
+ */
+static void
+load_register (int reg, expressionS *ep, int dbl)
+{
+ int freg;
+ expressionS hi32, lo32;
- used_at = 1;
- }
- offset_expr.X_add_number = SEXT_16BIT (expr1.X_add_number);
- relax_switch ();
+ if (ep->X_op != O_big)
+ {
+ gas_assert (ep->X_op == O_constant);
- if (gpdelay)
- {
- /* This is needed because this instruction uses $gp, but
- the first instruction on the main stream does not. */
- macro_build (NULL, "nop", "");
- }
+ /* Sign-extending 32-bit constants makes their handling easier. */
+ if (!dbl)
+ normalize_constant_expr (ep);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- local_reloc_type, mips_gp_register);
- if (expr1.X_add_number >= -0x8000
- && expr1.X_add_number < 0x8000)
- {
- load_delay_nop ();
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, tempreg, BFD_RELOC_LO16);
- /* FIXME: If add_number is 0, and there was no base
- register, the external symbol case ended with a load,
- so if the symbol turns out to not be external, and
- the next instruction uses tempreg, an unnecessary nop
- will be inserted. */
- }
- else
- {
- if (breg == treg)
- {
- /* We must add in the base register now, as in the
- external symbol case. */
- gas_assert (tempreg == AT);
- load_delay_nop ();
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- tempreg = treg;
- /* We set breg to 0 because we have arranged to add
- it in in both cases. */
- breg = 0;
- }
-
- macro_build_lui (&expr1, AT);
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- AT, AT, BFD_RELOC_LO16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, AT);
- used_at = 1;
- }
- relax_end ();
+ if (IS_SEXT_16BIT_NUM (ep->X_add_number))
+ {
+ /* We can handle 16 bit signed values with an addiu to
+ $zero. No need to ever use daddiu here, since $zero and
+ the result are always correct in 32 bit mode. */
+ macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
+ return;
}
- else if (mips_big_got && HAVE_NEWABI)
+ else if (ep->X_add_number >= 0 && ep->X_add_number < 0x10000)
{
- int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16;
- int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16;
- int add_breg_early = 0;
-
- /* This is the large GOT case. If this is a reference to an
- external symbol, and there is no constant, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- add $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- or for lca or if tempreg is PIC_CALL_REG
- lui $tempreg,<sym> (BFD_RELOC_MIPS_CALL_HI16)
- add $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_CALL_LO16)
+ /* We can handle 16 bit unsigned values with an ori to
+ $zero. */
+ macro_build (ep, "ori", "t,r,i", reg, 0, BFD_RELOC_LO16);
+ return;
+ }
+ else if ((IS_SEXT_32BIT_NUM (ep->X_add_number)))
+ {
+ /* 32 bit values require an lui. */
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
+ if ((ep->X_add_number & 0xffff) != 0)
+ macro_build (ep, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16);
+ return;
+ }
+ }
- If we have a small constant, and this is a reference to
- an external symbol, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- add $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- addi $tempreg,$tempreg,<constant>
+ /* The value is larger than 32 bits. */
- If we have a large constant, and this is a reference to
- an external symbol, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- addu $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- lui $at,<hiconstant>
- addi $at,$at,<loconstant>
- add $tempreg,$tempreg,$at
+ if (!dbl || HAVE_32BIT_GPRS)
+ {
+ char value[32];
- If we have NewABI, and we know it's a local symbol, we want
- lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
- addiu $reg,$reg,<sym> (BFD_RELOC_MIPS_GOT_OFST)
- otherwise we have to resort to GOT_HI16/GOT_LO16. */
+ sprintf_vma (value, ep->X_add_number);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
+ macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
+ return;
+ }
- relax_start (offset_expr.X_add_symbol);
+ if (ep->X_op != O_big)
+ {
+ hi32 = *ep;
+ hi32.X_add_number = (valueT) hi32.X_add_number >> 16;
+ hi32.X_add_number = (valueT) hi32.X_add_number >> 16;
+ hi32.X_add_number &= 0xffffffff;
+ lo32 = *ep;
+ lo32.X_add_number &= 0xffffffff;
+ }
+ else
+ {
+ gas_assert (ep->X_add_number > 2);
+ if (ep->X_add_number == 3)
+ generic_bignum[3] = 0;
+ else if (ep->X_add_number > 4)
+ as_bad (_("number larger than 64 bits"));
+ lo32.X_op = O_constant;
+ lo32.X_add_number = generic_bignum[0] + (generic_bignum[1] << 16);
+ hi32.X_op = O_constant;
+ hi32.X_add_number = generic_bignum[2] + (generic_bignum[3] << 16);
+ }
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number = 0;
+ if (hi32.X_add_number == 0)
+ freg = 0;
+ else
+ {
+ int shift, bit;
+ unsigned long hi, lo;
- if (expr1.X_add_number == 0 && breg == 0
- && (call || tempreg == PIC_CALL_REG))
+ if (hi32.X_add_number == (offsetT) 0xffffffff)
+ {
+ if ((lo32.X_add_number & 0xffff8000) == 0xffff8000)
{
- lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16;
- lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16;
+ macro_build (&lo32, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
+ return;
}
- macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, mips_gp_register);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- tempreg, lw_reloc_type, tempreg);
-
- if (expr1.X_add_number == 0)
- ;
- else if (expr1.X_add_number >= -0x8000
- && expr1.X_add_number < 0x8000)
+ if (lo32.X_add_number & 0x80000000)
{
- macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, tempreg, BFD_RELOC_LO16);
+ macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
+ if (lo32.X_add_number & 0xffff)
+ macro_build (&lo32, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16);
+ return;
}
- else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
- {
- /* If we are going to add in a base register, and the
- target register and the base register are the same,
- then we are using AT as a temporary register. Since
- we want to load the constant into AT, we add our
- current AT (from the global offset table) and the
- register into the register now, and pretend we were
- not using a base register. */
- if (breg != treg)
- dreg = tempreg;
- else
- {
- gas_assert (tempreg == AT);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- dreg = treg;
- add_breg_early = 1;
- }
+ }
- load_register (AT, &expr1, HAVE_64BIT_ADDRESSES);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dreg, dreg, AT);
+ /* Check for 16bit shifted constant. We know that hi32 is
+ non-zero, so start the mask on the first bit of the hi32
+ value. */
+ shift = 17;
+ do
+ {
+ unsigned long himask, lomask;
- used_at = 1;
+ if (shift < 32)
+ {
+ himask = 0xffff >> (32 - shift);
+ lomask = (0xffff << shift) & 0xffffffff;
}
else
- as_bad (_("PIC code offset overflow (max 32 signed bits)"));
+ {
+ himask = 0xffff << (shift - 32);
+ lomask = 0;
+ }
+ if ((hi32.X_add_number & ~(offsetT) himask) == 0
+ && (lo32.X_add_number & ~(offsetT) lomask) == 0)
+ {
+ expressionS tmp;
- relax_switch ();
- offset_expr.X_add_number = expr1.X_add_number;
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg,
- tempreg, BFD_RELOC_MIPS_GOT_OFST);
- if (add_breg_early)
+ tmp.X_op = O_constant;
+ if (shift < 32)
+ tmp.X_add_number = ((hi32.X_add_number << (32 - shift))
+ | (lo32.X_add_number >> shift));
+ else
+ tmp.X_add_number = hi32.X_add_number >> (shift - 32);
+ macro_build (&tmp, "ori", "t,r,i", reg, 0, BFD_RELOC_LO16);
+ macro_build (NULL, (shift >= 32) ? "dsll32" : "dsll", SHFT_FMT,
+ reg, reg, (shift >= 32) ? shift - 32 : shift);
+ return;
+ }
+ ++shift;
+ }
+ while (shift <= (64 - 16));
+
+ /* Find the bit number of the lowest one bit, and store the
+ shifted value in hi/lo. */
+ hi = (unsigned long) (hi32.X_add_number & 0xffffffff);
+ lo = (unsigned long) (lo32.X_add_number & 0xffffffff);
+ if (lo != 0)
+ {
+ bit = 0;
+ while ((lo & 1) == 0)
{
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, tempreg, breg);
- breg = 0;
- tempreg = treg;
+ lo >>= 1;
+ ++bit;
}
- relax_end ();
+ lo |= (hi & (((unsigned long) 1 << bit) - 1)) << (32 - bit);
+ hi >>= bit;
}
else
- abort ();
-
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", treg, tempreg, breg);
- break;
-
- case M_MSGSND:
- gas_assert (!mips_opts.micromips);
- {
- unsigned long temp = (treg << 16) | (0x01);
- macro_build (NULL, "c2", "C", temp);
- }
- break;
-
- case M_MSGLD:
- gas_assert (!mips_opts.micromips);
- {
- unsigned long temp = (0x02);
- macro_build (NULL, "c2", "C", temp);
- }
- break;
+ {
+ bit = 32;
+ while ((hi & 1) == 0)
+ {
+ hi >>= 1;
+ ++bit;
+ }
+ lo = hi;
+ hi = 0;
+ }
- case M_MSGLD_T:
- gas_assert (!mips_opts.micromips);
- {
- unsigned long temp = (treg << 16) | (0x02);
- macro_build (NULL, "c2", "C", temp);
- }
- break;
+ /* Optimize if the shifted value is a (power of 2) - 1. */
+ if ((hi == 0 && ((lo + 1) & lo) == 0)
+ || (lo == 0xffffffff && ((hi + 1) & hi) == 0))
+ {
+ shift = COUNT_TOP_ZEROES ((unsigned int) hi32.X_add_number);
+ if (shift != 0)
+ {
+ expressionS tmp;
- case M_MSGWAIT:
- gas_assert (!mips_opts.micromips);
- macro_build (NULL, "c2", "C", 3);
- break;
+ /* This instruction will set the register to be all
+ ones. */
+ tmp.X_op = O_constant;
+ tmp.X_add_number = (offsetT) -1;
+ macro_build (&tmp, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
+ if (bit != 0)
+ {
+ bit += shift;
+ macro_build (NULL, (bit >= 32) ? "dsll32" : "dsll", SHFT_FMT,
+ reg, reg, (bit >= 32) ? bit - 32 : bit);
+ }
+ macro_build (NULL, (shift >= 32) ? "dsrl32" : "dsrl", SHFT_FMT,
+ reg, reg, (shift >= 32) ? shift - 32 : shift);
+ return;
+ }
+ }
- case M_MSGWAIT_T:
- gas_assert (!mips_opts.micromips);
- {
- unsigned long temp = (treg << 16) | 0x03;
- macro_build (NULL, "c2", "C", temp);
- }
- break;
+ /* Sign extend hi32 before calling load_register, because we can
+ generally get better code when we load a sign extended value. */
+ if ((hi32.X_add_number & 0x80000000) != 0)
+ hi32.X_add_number |= ~(offsetT) 0xffffffff;
+ load_register (reg, &hi32, 0);
+ freg = reg;
+ }
+ if ((lo32.X_add_number & 0xffff0000) == 0)
+ {
+ if (freg != 0)
+ {
+ macro_build (NULL, "dsll32", SHFT_FMT, reg, freg, 0);
+ freg = reg;
+ }
+ }
+ else
+ {
+ expressionS mid16;
- case M_J_A:
- /* The j instruction may not be used in PIC code, since it
- requires an absolute address. We convert it to a b
- instruction. */
- if (mips_pic == NO_PIC)
- macro_build (&offset_expr, "j", "a");
- else
- macro_build (&offset_expr, "b", "p");
- break;
+ if ((freg == 0) && (lo32.X_add_number == (offsetT) 0xffffffff))
+ {
+ macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
+ macro_build (NULL, "dsrl32", SHFT_FMT, reg, reg, 0);
+ return;
+ }
- /* The jal instructions must be handled as macros because when
- generating PIC code they expand to multi-instruction
- sequences. Normally they are simple instructions. */
- case M_JALS_1:
- dreg = RA;
- /* Fall through. */
- case M_JALS_2:
- gas_assert (mips_opts.micromips);
- if (mips_opts.insn32)
+ if (freg != 0)
{
- as_bad (_("Opcode not supported in the `insn32' mode `%s'"), str);
- break;
+ macro_build (NULL, "dsll", SHFT_FMT, reg, freg, 16);
+ freg = reg;
}
- jals = 1;
- goto jal;
- case M_JAL_1:
- dreg = RA;
- /* Fall through. */
- case M_JAL_2:
- jal:
- if (mips_pic == NO_PIC)
+ mid16 = lo32;
+ mid16.X_add_number >>= 16;
+ macro_build (&mid16, "ori", "t,r,i", reg, freg, BFD_RELOC_LO16);
+ macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
+ freg = reg;
+ }
+ if ((lo32.X_add_number & 0xffff) != 0)
+ macro_build (&lo32, "ori", "t,r,i", reg, freg, BFD_RELOC_LO16);
+}
+
+static inline void
+load_delay_nop (void)
+{
+ if (!gpr_interlocks)
+ macro_build (NULL, "nop", "");
+}
+
+/* Load an address into a register. */
+
+static void
+load_address (int reg, expressionS *ep, int *used_at)
+{
+ if (ep->X_op != O_constant
+ && ep->X_op != O_symbol)
+ {
+ as_bad (_("expression too complex"));
+ ep->X_op = O_constant;
+ }
+
+ if (ep->X_op == O_constant)
+ {
+ load_register (reg, ep, HAVE_64BIT_ADDRESSES);
+ return;
+ }
+
+ if (mips_pic == NO_PIC)
+ {
+ /* If this is a reference to a GP relative symbol, we want
+ addiu $reg,$gp,<sym> (BFD_RELOC_GPREL16)
+ Otherwise we want
+ lui $reg,<sym> (BFD_RELOC_HI16_S)
+ addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
+ If we have an addend, we always use the latter form.
+
+ With 64bit address space and a usable $at we want
+ lui $reg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ lui $at,<sym> (BFD_RELOC_HI16_S)
+ daddiu $reg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ daddiu $at,<sym> (BFD_RELOC_LO16)
+ dsll32 $reg,0
+ daddu $reg,$reg,$at
+
+ If $at is already in use, we use a path which is suboptimal
+ on superscalar processors.
+ lui $reg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ daddiu $reg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ dsll $reg,16
+ daddiu $reg,<sym> (BFD_RELOC_HI16_S)
+ dsll $reg,16
+ daddiu $reg,<sym> (BFD_RELOC_LO16)
+
+ For GP relative symbols in 64bit address space we can use
+ the same sequence as in 32bit address space. */
+ if (HAVE_64BIT_SYMBOLS)
{
- s = jals ? "jalrs" : "jalr";
- if (mips_opts.micromips
- && !mips_opts.insn32
- && dreg == RA
- && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
- macro_build (NULL, s, "mj", sreg);
+ if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (ep->X_add_symbol, 1))
+ {
+ relax_start (ep->X_add_symbol);
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg,
+ mips_gp_register, BFD_RELOC_GPREL16);
+ relax_switch ();
+ }
+
+ if (*used_at == 0 && mips_opts.at)
+ {
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST);
+ macro_build (ep, "lui", LUI_FMT, AT, BFD_RELOC_HI16_S);
+ macro_build (ep, "daddiu", "t,r,j", reg, reg,
+ BFD_RELOC_MIPS_HIGHER);
+ macro_build (ep, "daddiu", "t,r,j", AT, AT, BFD_RELOC_LO16);
+ macro_build (NULL, "dsll32", SHFT_FMT, reg, reg, 0);
+ macro_build (NULL, "daddu", "d,v,t", reg, reg, AT);
+ *used_at = 1;
+ }
else
- macro_build (NULL, s, JALR_FMT, dreg, sreg);
+ {
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST);
+ macro_build (ep, "daddiu", "t,r,j", reg, reg,
+ BFD_RELOC_MIPS_HIGHER);
+ macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
+ macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_HI16_S);
+ macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
+ macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_LO16);
+ }
+
+ if (mips_relax.sequence)
+ relax_end ();
}
else
{
- int cprestore = (mips_pic == SVR4_PIC && !HAVE_NEWABI
- && mips_cprestore_offset >= 0);
-
- if (sreg != PIC_CALL_REG)
- as_warn (_("MIPS PIC call to register other than $25"));
-
- s = ((mips_opts.micromips
- && !mips_opts.insn32
- && (!mips_opts.noreorder || cprestore))
- ? "jalrs" : "jalr");
- if (mips_opts.micromips
- && !mips_opts.insn32
- && dreg == RA
- && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
- macro_build (NULL, s, "mj", sreg);
- else
- macro_build (NULL, s, JALR_FMT, dreg, sreg);
- if (mips_pic == SVR4_PIC && !HAVE_NEWABI)
+ if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (ep->X_add_symbol, 1))
{
- if (mips_cprestore_offset < 0)
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
- else
- {
- if (!mips_frame_reg_valid)
- {
- as_warn (_("No .frame pseudo-op used in PIC code"));
- /* Quiet this warning. */
- mips_frame_reg_valid = 1;
- }
- if (!mips_cprestore_valid)
- {
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
- /* Quiet this warning. */
- mips_cprestore_valid = 1;
- }
- if (mips_opts.noreorder)
- macro_build (NULL, "nop", "");
- expr1.X_add_number = mips_cprestore_offset;
- macro_build_ldst_constoffset (&expr1, ADDRESS_LOAD_INSN,
- mips_gp_register,
- mips_frame_reg,
- HAVE_64BIT_ADDRESSES);
- }
+ relax_start (ep->X_add_symbol);
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg,
+ mips_gp_register, BFD_RELOC_GPREL16);
+ relax_switch ();
}
+ macro_build_lui (ep, reg);
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j",
+ reg, reg, BFD_RELOC_LO16);
+ if (mips_relax.sequence)
+ relax_end ();
}
+ }
+ else if (!mips_big_got)
+ {
+ expressionS ex;
- break;
+ /* If this is a reference to an external symbol, we want
+ lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ Otherwise we want
+ lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
+ If there is a constant, it must be added in after.
- case M_JALS_A:
- gas_assert (mips_opts.micromips);
- if (mips_opts.insn32)
- {
- as_bad (_("Opcode not supported in the `insn32' mode `%s'"), str);
- break;
- }
- jals = 1;
- /* Fall through. */
- case M_JAL_A:
- if (mips_pic == NO_PIC)
- macro_build (&offset_expr, jals ? "jals" : "jal", "a");
- else if (mips_pic == SVR4_PIC)
+ If we have NewABI, we want
+ lw $reg,<sym+cst>($gp) (BFD_RELOC_MIPS_GOT_DISP)
+ unless we're referencing a global symbol with a non-zero
+ offset, in which case cst must be added separately. */
+ if (HAVE_NEWABI)
{
- /* If this is a reference to an external symbol, and we are
- using a small GOT, we want
- lw $25,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
- nop
- jalr $ra,$25
- nop
- lw $gp,cprestore($sp)
- The cprestore value is set using the .cprestore
- pseudo-op. If we are using a big GOT, we want
- lui $25,<sym> (BFD_RELOC_MIPS_CALL_HI16)
- addu $25,$25,$gp
- lw $25,<sym>($25) (BFD_RELOC_MIPS_CALL_LO16)
- nop
- jalr $ra,$25
- nop
- lw $gp,cprestore($sp)
- If the symbol is not external, we want
- lw $25,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $25,$25,<sym> (BFD_RELOC_LO16)
- jalr $ra,$25
- nop
- lw $gp,cprestore($sp)
-
- For NewABI, we use the same CALL16 or CALL_HI16/CALL_LO16
- sequences above, minus nops, unless the symbol is local,
- which enables us to use GOT_PAGE/GOT_OFST (big got) or
- GOT_DISP. */
- if (HAVE_NEWABI)
+ if (ep->X_add_number)
{
- if (!mips_big_got)
- {
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- PIC_CALL_REG, BFD_RELOC_MIPS_CALL16,
- mips_gp_register);
- relax_switch ();
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- PIC_CALL_REG, BFD_RELOC_MIPS_GOT_DISP,
- mips_gp_register);
- relax_end ();
- }
- else
- {
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG,
- BFD_RELOC_MIPS_CALL_HI16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG,
- PIC_CALL_REG, mips_gp_register);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- PIC_CALL_REG, BFD_RELOC_MIPS_CALL_LO16,
- PIC_CALL_REG);
- relax_switch ();
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- PIC_CALL_REG, BFD_RELOC_MIPS_GOT_PAGE,
- mips_gp_register);
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- PIC_CALL_REG, PIC_CALL_REG,
- BFD_RELOC_MIPS_GOT_OFST);
- relax_end ();
- }
-
- macro_build_jalr (&offset_expr, 0);
+ ex.X_add_number = ep->X_add_number;
+ ep->X_add_number = 0;
+ relax_start (ep->X_add_symbol);
+ macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
+ BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
+ if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ ex.X_op = O_constant;
+ macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j",
+ reg, reg, BFD_RELOC_LO16);
+ ep->X_add_number = ex.X_add_number;
+ relax_switch ();
}
- else
+ macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
+ BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
+ if (mips_relax.sequence)
+ relax_end ();
+ }
+ else
+ {
+ ex.X_add_number = ep->X_add_number;
+ ep->X_add_number = 0;
+ macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ load_delay_nop ();
+ relax_start (ep->X_add_symbol);
+ relax_switch ();
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
+ BFD_RELOC_LO16);
+ relax_end ();
+
+ if (ex.X_add_number != 0)
{
- relax_start (offset_expr.X_add_symbol);
- if (!mips_big_got)
- {
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- PIC_CALL_REG, BFD_RELOC_MIPS_CALL16,
- mips_gp_register);
- load_delay_nop ();
- relax_switch ();
- }
- else
- {
- int gpdelay;
+ if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ ex.X_op = O_constant;
+ macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j",
+ reg, reg, BFD_RELOC_LO16);
+ }
+ }
+ }
+ else if (mips_big_got)
+ {
+ expressionS ex;
- gpdelay = reg_needs_delay (mips_gp_register);
- macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG,
- BFD_RELOC_MIPS_CALL_HI16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG,
- PIC_CALL_REG, mips_gp_register);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- PIC_CALL_REG, BFD_RELOC_MIPS_CALL_LO16,
- PIC_CALL_REG);
- load_delay_nop ();
- relax_switch ();
- if (gpdelay)
- macro_build (NULL, "nop", "");
- }
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- PIC_CALL_REG, BFD_RELOC_MIPS_GOT16,
- mips_gp_register);
- load_delay_nop ();
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- PIC_CALL_REG, PIC_CALL_REG, BFD_RELOC_LO16);
- relax_end ();
- macro_build_jalr (&offset_expr, mips_cprestore_offset >= 0);
+ /* This is the large GOT case. If this is a reference to an
+ external symbol, we want
+ lui $reg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $reg,$reg,$gp
+ lw $reg,<sym>($reg) (BFD_RELOC_MIPS_GOT_LO16)
- if (mips_cprestore_offset < 0)
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
- else
- {
- if (!mips_frame_reg_valid)
- {
- as_warn (_("No .frame pseudo-op used in PIC code"));
- /* Quiet this warning. */
- mips_frame_reg_valid = 1;
- }
- if (!mips_cprestore_valid)
- {
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
- /* Quiet this warning. */
- mips_cprestore_valid = 1;
- }
- if (mips_opts.noreorder)
- macro_build (NULL, "nop", "");
- expr1.X_add_number = mips_cprestore_offset;
- macro_build_ldst_constoffset (&expr1, ADDRESS_LOAD_INSN,
- mips_gp_register,
- mips_frame_reg,
- HAVE_64BIT_ADDRESSES);
- }
+ Otherwise, for a reference to a local symbol in old ABI, we want
+ lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
+ If there is a constant, it must be added in after.
+
+ In the NewABI, for local symbols, with or without offsets, we want:
+ lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
+ addiu $reg,$reg,<sym> (BFD_RELOC_MIPS_GOT_OFST)
+ */
+ if (HAVE_NEWABI)
+ {
+ ex.X_add_number = ep->X_add_number;
+ ep->X_add_number = 0;
+ relax_start (ep->X_add_symbol);
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ reg, reg, mips_gp_register);
+ macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)",
+ reg, BFD_RELOC_MIPS_GOT_LO16, reg);
+ if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ else if (ex.X_add_number)
+ {
+ ex.X_op = O_constant;
+ macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
+ BFD_RELOC_LO16);
}
+
+ ep->X_add_number = ex.X_add_number;
+ relax_switch ();
+ macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
+ BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
+ BFD_RELOC_MIPS_GOT_OFST);
+ relax_end ();
}
- else if (mips_pic == VXWORKS_PIC)
- as_bad (_("Non-PIC jump used in PIC library"));
else
- abort ();
+ {
+ ex.X_add_number = ep->X_add_number;
+ ep->X_add_number = 0;
+ relax_start (ep->X_add_symbol);
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ reg, reg, mips_gp_register);
+ macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)",
+ reg, BFD_RELOC_MIPS_GOT_LO16, reg);
+ relax_switch ();
+ if (reg_needs_delay (mips_gp_register))
+ {
+ /* We need a nop before loading from $gp. This special
+ check is required because the lui which starts the main
+ instruction stream does not refer to $gp, and so will not
+ insert the nop which may be required. */
+ macro_build (NULL, "nop", "");
+ }
+ macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ load_delay_nop ();
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
+ BFD_RELOC_LO16);
+ relax_end ();
- break;
+ if (ex.X_add_number != 0)
+ {
+ if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ ex.X_op = O_constant;
+ macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", reg, reg,
+ BFD_RELOC_LO16);
+ }
+ }
+ }
+ else
+ abort ();
- case M_LBUE_AB:
- s = "lbue";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_LHUE_AB:
- s = "lhue";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_LBE_AB:
- s = "lbe";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_LHE_AB:
- s = "lhe";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_LLE_AB:
- s = "lle";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_LWE_AB:
- s = "lwe";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_LWLE_AB:
- s = "lwle";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_LWRE_AB:
- s = "lwre";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_SBE_AB:
- s = "sbe";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_SCE_AB:
- s = "sce";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_SHE_AB:
- s = "she";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_SWE_AB:
- s = "swe";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_SWLE_AB:
- s = "swle";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_SWRE_AB:
- s = "swre";
- fmt = "t,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_ACLR_AB:
- s = "aclr";
- treg = EXTRACT_OPERAND (mips_opts.micromips, 3BITPOS, *ip);
- fmt = "\\,~(b)";
- offbits = 12;
- goto ld_st;
- case M_ASET_AB:
- s = "aset";
- treg = EXTRACT_OPERAND (mips_opts.micromips, 3BITPOS, *ip);
- fmt = "\\,~(b)";
- offbits = 12;
- goto ld_st;
- case M_LB_AB:
- s = "lb";
- fmt = "t,o(b)";
- goto ld;
- case M_LBU_AB:
- s = "lbu";
- fmt = "t,o(b)";
- goto ld;
- case M_LH_AB:
- s = "lh";
- fmt = "t,o(b)";
- goto ld;
- case M_LHU_AB:
- s = "lhu";
- fmt = "t,o(b)";
- goto ld;
- case M_LW_AB:
- s = "lw";
- fmt = "t,o(b)";
- goto ld;
- case M_LWC0_AB:
- gas_assert (!mips_opts.micromips);
- s = "lwc0";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LWC1_AB:
- s = "lwc1";
- fmt = "T,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LWC2_AB:
- s = "lwc2";
- fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LWC3_AB:
- gas_assert (!mips_opts.micromips);
- s = "lwc3";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LWL_AB:
- s = "lwl";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_LWR_AB:
- s = "lwr";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_LDC1_AB:
- s = "ldc1";
- fmt = "T,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LDC2_AB:
- s = "ldc2";
- fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LQC2_AB:
- s = "lqc2";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LDC3_AB:
- s = "ldc3";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_LDL_AB:
- s = "ldl";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_LDR_AB:
- s = "ldr";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_LL_AB:
- s = "ll";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld;
- case M_LLD_AB:
- s = "lld";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld;
- case M_LWU_AB:
- s = "lwu";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld;
- case M_LWP_AB:
- gas_assert (mips_opts.micromips);
- s = "lwp";
- fmt = "t,~(b)";
- offbits = 12;
- lp = 1;
- goto ld;
- case M_LDP_AB:
- gas_assert (mips_opts.micromips);
- s = "ldp";
- fmt = "t,~(b)";
- offbits = 12;
- lp = 1;
- goto ld;
- case M_LWM_AB:
- gas_assert (mips_opts.micromips);
- s = "lwm";
- fmt = "n,~(b)";
- offbits = 12;
- goto ld_st;
- case M_LDM_AB:
- gas_assert (mips_opts.micromips);
- s = "ldm";
- fmt = "n,~(b)";
- offbits = 12;
- goto ld_st;
-
- ld:
- /* We don't want to use $0 as tempreg. */
- if (breg == treg + lp || treg + lp == ZERO)
- goto ld_st;
- else
- tempreg = treg + lp;
- goto ld_noat;
-
- case M_SB_AB:
- s = "sb";
- fmt = "t,o(b)";
- goto ld_st;
- case M_SH_AB:
- s = "sh";
- fmt = "t,o(b)";
- goto ld_st;
- case M_SW_AB:
- s = "sw";
- fmt = "t,o(b)";
- goto ld_st;
- case M_SWC0_AB:
- gas_assert (!mips_opts.micromips);
- s = "swc0";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_SWC1_AB:
- s = "swc1";
- fmt = "T,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_SWC2_AB:
- s = "swc2";
- fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_SWC3_AB:
- gas_assert (!mips_opts.micromips);
- s = "swc3";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_SWL_AB:
- s = "swl";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_SWR_AB:
- s = "swr";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_SC_AB:
- s = "sc";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_SCD_AB:
- s = "scd";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_CACHE_AB:
- s = "cache";
- fmt = mips_opts.micromips ? "k,~(b)" : "k,o(b)";
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_CACHEE_AB:
- s = "cachee";
- fmt = "k,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_PREF_AB:
- s = "pref";
- fmt = !mips_opts.micromips ? "k,o(b)" : "k,~(b)";
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_PREFE_AB:
- s = "prefe";
- fmt = "k,+j(b)";
- offbits = 9;
- goto ld_st;
- case M_SDC1_AB:
- s = "sdc1";
- fmt = "T,o(b)";
- coproc = 1;
- /* Itbl support may require additional care here. */
- goto ld_st;
- case M_SDC2_AB:
- s = "sdc2";
- fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_SQC2_AB:
- s = "sqc2";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_SDC3_AB:
- gas_assert (!mips_opts.micromips);
- s = "sdc3";
- fmt = "E,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
- goto ld_st;
- case M_SDL_AB:
- s = "sdl";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_SDR_AB:
- s = "sdr";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
- goto ld_st;
- case M_SWP_AB:
- gas_assert (mips_opts.micromips);
- s = "swp";
- fmt = "t,~(b)";
- offbits = 12;
- goto ld_st;
- case M_SDP_AB:
- gas_assert (mips_opts.micromips);
- s = "sdp";
- fmt = "t,~(b)";
- offbits = 12;
- goto ld_st;
- case M_SWM_AB:
- gas_assert (mips_opts.micromips);
- s = "swm";
- fmt = "n,~(b)";
- offbits = 12;
- goto ld_st;
- case M_SDM_AB:
- gas_assert (mips_opts.micromips);
- s = "sdm";
- fmt = "n,~(b)";
- offbits = 12;
+ if (!mips_opts.at && *used_at == 1)
+ as_bad (_("macro used $at after \".set noat\""));
+}
- ld_st:
- tempreg = AT;
- ld_noat:
- if (small_offset_p (0, align, 16))
- {
- /* The first case exists for M_LD_AB and M_SD_AB, which are
- macros for o32 but which should act like normal instructions
- otherwise. */
- if (offbits == 16)
- macro_build (&offset_expr, s, fmt, treg, -1, offset_reloc[0],
- offset_reloc[1], offset_reloc[2], breg);
- else if (small_offset_p (0, align, offbits))
- {
- if (offbits == 0)
- macro_build (NULL, s, fmt, treg, breg);
- else
- macro_build (NULL, s, fmt, treg,
- (unsigned long) offset_expr.X_add_number, breg);
- }
- else
- {
- if (tempreg == AT)
- used_at = 1;
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
- tempreg, breg, -1, offset_reloc[0],
- offset_reloc[1], offset_reloc[2]);
- if (offbits == 0)
- macro_build (NULL, s, fmt, treg, tempreg);
- else
- macro_build (NULL, s, fmt, treg, 0L, tempreg);
- }
- break;
- }
+/* Move the contents of register SOURCE into register DEST. */
- if (tempreg == AT)
- used_at = 1;
+static void
+move_register (int dest, int source)
+{
+ /* Prefer to use a 16-bit microMIPS instruction unless the previous
+ instruction specifically requires a 32-bit one. */
+ if (mips_opts.micromips
+ && !mips_opts.insn32
+ && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, "move", "mp,mj", dest, source);
+ else
+ macro_build (NULL, HAVE_32BIT_GPRS ? "addu" : "daddu", "d,v,t",
+ dest, source, 0);
+}
- if (offset_expr.X_op != O_constant
- && offset_expr.X_op != O_symbol)
- {
- as_bad (_("Expression too complex"));
- offset_expr.X_op = O_constant;
- }
+/* Emit an SVR4 PIC sequence to load address LOCAL into DEST, where
+ LOCAL is the sum of a symbol and a 16-bit or 32-bit displacement.
+ The two alternatives are:
- if (HAVE_32BIT_ADDRESSES
- && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
- {
- char value [32];
+ Global symbol Local sybmol
+ ------------- ------------
+ lw DEST,%got(SYMBOL) lw DEST,%got(SYMBOL + OFFSET)
+ ... ...
+ addiu DEST,DEST,OFFSET addiu DEST,DEST,%lo(SYMBOL + OFFSET)
- sprintf_vma (value, offset_expr.X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
- }
+ load_got_offset emits the first instruction and add_got_offset
+ emits the second for a 16-bit offset or add_got_offset_hilo emits
+ a sequence to add a 32-bit offset using a scratch register. */
- /* A constant expression in PIC code can be handled just as it
- is in non PIC code. */
- if (offset_expr.X_op == O_constant)
- {
- expr1.X_add_number = offset_high_part (offset_expr.X_add_number,
- offbits == 0 ? 16 : offbits);
- offset_expr.X_add_number -= expr1.X_add_number;
+static void
+load_got_offset (int dest, expressionS *local)
+{
+ expressionS global;
- load_register (tempreg, &expr1, HAVE_64BIT_ADDRESSES);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- if (offbits == 0)
- {
- if (offset_expr.X_add_number != 0)
- macro_build (&offset_expr, ADDRESS_ADDI_INSN,
- "t,r,j", tempreg, tempreg, BFD_RELOC_LO16);
- macro_build (NULL, s, fmt, treg, tempreg);
- }
- else if (offbits == 16)
- macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16, tempreg);
- else
- macro_build (NULL, s, fmt, treg,
- (unsigned long) offset_expr.X_add_number, tempreg);
- }
- else if (offbits != 16)
- {
- /* The offset field is too narrow to be used for a low-part
- relocation, so load the whole address into the auxillary
- register. */
- load_address (tempreg, &offset_expr, &used_at);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- if (offbits == 0)
- macro_build (NULL, s, fmt, treg, tempreg);
- else
- macro_build (NULL, s, fmt, treg, 0L, tempreg);
- }
- else if (mips_pic == NO_PIC)
- {
- /* If this is a reference to a GP relative symbol, and there
- is no base register, we want
- <op> $treg,<sym>($gp) (BFD_RELOC_GPREL16)
- Otherwise, if there is no base register, we want
- lui $tempreg,<sym> (BFD_RELOC_HI16_S)
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
- If we have a constant, we need two instructions anyhow,
- so we always use the latter form.
+ global = *local;
+ global.X_add_number = 0;
- If we have a base register, and this is a reference to a
- GP relative symbol, we want
- addu $tempreg,$breg,$gp
- <op> $treg,<sym>($tempreg) (BFD_RELOC_GPREL16)
- Otherwise we want
- lui $tempreg,<sym> (BFD_RELOC_HI16_S)
- addu $tempreg,$tempreg,$breg
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
- With a constant we always use the latter case.
+ relax_start (local->X_add_symbol);
+ macro_build (&global, ADDRESS_LOAD_INSN, "t,o(b)", dest,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ relax_switch ();
+ macro_build (local, ADDRESS_LOAD_INSN, "t,o(b)", dest,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ relax_end ();
+}
- With 64bit address space and no base register and $at usable,
- we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- lui $at,<sym> (BFD_RELOC_HI16_S)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- dsll32 $tempreg,0
- daddu $tempreg,$at
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
- If we have a base register, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- lui $at,<sym> (BFD_RELOC_HI16_S)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- daddu $at,$breg
- dsll32 $tempreg,0
- daddu $tempreg,$at
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+static void
+add_got_offset (int dest, expressionS *local)
+{
+ expressionS global;
- Without $at we can't generate the optimal path for superscalar
- processors here since this would require two temporary registers.
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- dsll $tempreg,16
- daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
- dsll $tempreg,16
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
- If we have a base register, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- dsll $tempreg,16
- daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
- dsll $tempreg,16
- daddu $tempreg,$tempreg,$breg
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+ global.X_op = O_constant;
+ global.X_op_symbol = NULL;
+ global.X_add_symbol = NULL;
+ global.X_add_number = local->X_add_number;
+
+ relax_start (local->X_add_symbol);
+ macro_build (&global, ADDRESS_ADDI_INSN, "t,r,j",
+ dest, dest, BFD_RELOC_LO16);
+ relax_switch ();
+ macro_build (local, ADDRESS_ADDI_INSN, "t,r,j", dest, dest, BFD_RELOC_LO16);
+ relax_end ();
+}
+
+static void
+add_got_offset_hilo (int dest, expressionS *local, int tmp)
+{
+ expressionS global;
+ int hold_mips_optimize;
+
+ global.X_op = O_constant;
+ global.X_op_symbol = NULL;
+ global.X_add_symbol = NULL;
+ global.X_add_number = local->X_add_number;
+
+ relax_start (local->X_add_symbol);
+ load_register (tmp, &global, HAVE_64BIT_ADDRESSES);
+ relax_switch ();
+ /* Set mips_optimize around the lui instruction to avoid
+ inserting an unnecessary nop after the lw. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
+ macro_build_lui (&global, tmp);
+ mips_optimize = hold_mips_optimize;
+ macro_build (local, ADDRESS_ADDI_INSN, "t,r,j", tmp, tmp, BFD_RELOC_LO16);
+ relax_end ();
+
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dest, dest, tmp);
+}
+
+/* Emit a sequence of instructions to emulate a branch likely operation.
+ BR is an ordinary branch corresponding to one to be emulated. BRNEG
+ is its complementing branch with the original condition negated.
+ CALL is set if the original branch specified the link operation.
+ EP, FMT, SREG and TREG specify the usual macro_build() parameters.
- For GP relative symbols in 64bit address space we can use
- the same sequence as in 32bit address space. */
- if (HAVE_64BIT_SYMBOLS)
- {
- if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (offset_expr.X_add_symbol, 1))
- {
- relax_start (offset_expr.X_add_symbol);
- if (breg == 0)
- {
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_GPREL16, mips_gp_register);
- }
- else
- {
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, breg, mips_gp_register);
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_GPREL16, tempreg);
- }
- relax_switch ();
- }
+ Code like this is produced in the noreorder mode:
- if (used_at == 0 && mips_opts.at)
- {
- macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
- BFD_RELOC_MIPS_HIGHEST);
- macro_build (&offset_expr, "lui", LUI_FMT, AT,
- BFD_RELOC_HI16_S);
- macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
- tempreg, BFD_RELOC_MIPS_HIGHER);
- if (breg != 0)
- macro_build (NULL, "daddu", "d,v,t", AT, AT, breg);
- macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0);
- macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT);
- macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16,
- tempreg);
- used_at = 1;
- }
- else
- {
- macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
- BFD_RELOC_MIPS_HIGHEST);
- macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
- tempreg, BFD_RELOC_MIPS_HIGHER);
- macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
- macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
- tempreg, BFD_RELOC_HI16_S);
- macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
- if (breg != 0)
- macro_build (NULL, "daddu", "d,v,t",
- tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_LO16, tempreg);
- }
+ BRNEG <args>, 1f
+ nop
+ b <sym>
+ delay slot (executed only if branch taken)
+ 1:
- if (mips_relax.sequence)
- relax_end ();
- break;
- }
+ or, if CALL is set:
- if (breg == 0)
- {
- if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (offset_expr.X_add_symbol, 1))
- {
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_GPREL16,
- mips_gp_register);
- relax_switch ();
- }
- macro_build_lui (&offset_expr, tempreg);
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_LO16, tempreg);
- if (mips_relax.sequence)
- relax_end ();
- }
- else
- {
- if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (offset_expr.X_add_symbol, 1))
- {
- relax_start (offset_expr.X_add_symbol);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, breg, mips_gp_register);
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_GPREL16, tempreg);
- relax_switch ();
- }
- macro_build_lui (&offset_expr, tempreg);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_LO16, tempreg);
- if (mips_relax.sequence)
- relax_end ();
- }
- }
- else if (!mips_big_got)
- {
- int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
+ BRNEG <args>, 1f
+ nop
+ bal <sym>
+ delay slot (executed only if branch taken)
+ 1:
- /* If this is a reference to an external symbol, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- <op> $treg,0($tempreg)
- Otherwise we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- <op> $treg,0($tempreg)
+ In the reorder mode the delay slot would be filled with a nop anyway,
+ so code produced is simply:
- For NewABI, we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
- <op> $treg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST)
+ BR <args>, <sym>
+ nop
- If there is a base register, we add it to $tempreg before
- the <op>. If there is a constant, we stick it in the
- <op> instruction. We don't handle constants larger than
- 16 bits, because we have no way to load the upper 16 bits
- (actually, we could handle them for the subset of cases
- in which we are not using $at). */
- gas_assert (offset_expr.X_op == O_symbol);
- if (HAVE_NEWABI)
- {
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_MIPS_GOT_OFST, tempreg);
- break;
- }
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number = 0;
- if (expr1.X_add_number < -0x8000
- || expr1.X_add_number >= 0x8000)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- lw_reloc_type, mips_gp_register);
- load_delay_nop ();
- relax_start (offset_expr.X_add_symbol);
- relax_switch ();
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg,
- tempreg, BFD_RELOC_LO16);
- relax_end ();
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
- }
- else if (mips_big_got && !HAVE_NEWABI)
- {
- int gpdelay;
+ This function is used when producing code for the microMIPS ASE that
+ does not implement branch likely instructions in hardware. */
- /* If this is a reference to an external symbol, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- addu $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- <op> $treg,0($tempreg)
- Otherwise we want
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- <op> $treg,0($tempreg)
- If there is a base register, we add it to $tempreg before
- the <op>. If there is a constant, we stick it in the
- <op> instruction. We don't handle constants larger than
- 16 bits, because we have no way to load the upper 16 bits
- (actually, we could handle them for the subset of cases
- in which we are not using $at). */
- gas_assert (offset_expr.X_op == O_symbol);
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number = 0;
- if (expr1.X_add_number < -0x8000
- || expr1.X_add_number >= 0x8000)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- gpdelay = reg_needs_delay (mips_gp_register);
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
- BFD_RELOC_MIPS_GOT_HI16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg,
- mips_gp_register);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_LO16, tempreg);
- relax_switch ();
- if (gpdelay)
- macro_build (NULL, "nop", "");
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- load_delay_nop ();
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg,
- tempreg, BFD_RELOC_LO16);
- relax_end ();
+static void
+macro_build_branch_likely (const char *br, const char *brneg,
+ int call, expressionS *ep, const char *fmt,
+ unsigned int sreg, unsigned int treg)
+{
+ int noreorder = mips_opts.noreorder;
+ expressionS expr1;
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
- }
- else if (mips_big_got && HAVE_NEWABI)
- {
- /* If this is a reference to an external symbol, we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- add $tempreg,$tempreg,$gp
- lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- <op> $treg,<ofst>($tempreg)
- Otherwise, for local symbols, we want:
- lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
- <op> $treg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST) */
- gas_assert (offset_expr.X_op == O_symbol);
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number = 0;
- if (expr1.X_add_number < -0x8000
- || expr1.X_add_number >= 0x8000)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
- BFD_RELOC_MIPS_GOT_HI16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg,
- mips_gp_register);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_LO16, tempreg);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
+ gas_assert (mips_opts.micromips);
+ start_noreorder ();
+ if (noreorder)
+ {
+ micromips_label_expr (&expr1);
+ macro_build (&expr1, brneg, fmt, sreg, treg);
+ macro_build (NULL, "nop", "");
+ macro_build (ep, call ? "bal" : "b", "p");
- relax_switch ();
- offset_expr.X_add_number = expr1.X_add_number;
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
- BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
- BFD_RELOC_MIPS_GOT_OFST, tempreg);
- relax_end ();
- }
- else
- abort ();
+ /* Set to true so that append_insn adds a label. */
+ emit_branch_likely_macro = TRUE;
+ }
+ else
+ {
+ macro_build (ep, br, fmt, sreg, treg);
+ macro_build (NULL, "nop", "");
+ }
+ end_noreorder ();
+}
+
+/* Emit a coprocessor branch-likely macro specified by TYPE, using CC as
+ the condition code tested. EP specifies the branch target. */
+static void
+macro_build_branch_ccl (int type, expressionS *ep, unsigned int cc)
+{
+ const int call = 0;
+ const char *brneg;
+ const char *br;
+
+ switch (type)
+ {
+ case M_BC1FL:
+ br = "bc1f";
+ brneg = "bc1t";
+ break;
+ case M_BC1TL:
+ br = "bc1t";
+ brneg = "bc1f";
+ break;
+ case M_BC2FL:
+ br = "bc2f";
+ brneg = "bc2t";
+ break;
+ case M_BC2TL:
+ br = "bc2t";
+ brneg = "bc2f";
break;
+ default:
+ abort ();
+ }
+ macro_build_branch_likely (br, brneg, call, ep, "N,p", cc, ZERO);
+}
- case M_JRADDIUSP:
+/* Emit a two-argument branch macro specified by TYPE, using SREG as
+ the register tested. EP specifies the branch target. */
+
+static void
+macro_build_branch_rs (int type, expressionS *ep, unsigned int sreg)
+{
+ const char *brneg = NULL;
+ const char *br;
+ int call = 0;
+
+ switch (type)
+ {
+ case M_BGEZ:
+ br = "bgez";
+ break;
+ case M_BGEZL:
+ br = mips_opts.micromips ? "bgez" : "bgezl";
+ brneg = "bltz";
+ break;
+ case M_BGEZALL:
gas_assert (mips_opts.micromips);
- gas_assert (mips_opts.insn32);
- start_noreorder ();
- macro_build (NULL, "jr", "s", RA);
- expr1.X_add_number = EXTRACT_OPERAND (1, IMMP, *ip) << 2;
- macro_build (&expr1, "addiu", "t,r,j", SP, SP, BFD_RELOC_LO16);
- end_noreorder ();
+ br = mips_opts.insn32 ? "bgezal" : "bgezals";
+ brneg = "bltz";
+ call = 1;
break;
-
- case M_JRC:
+ case M_BGTZ:
+ br = "bgtz";
+ break;
+ case M_BGTZL:
+ br = mips_opts.micromips ? "bgtz" : "bgtzl";
+ brneg = "blez";
+ break;
+ case M_BLEZ:
+ br = "blez";
+ break;
+ case M_BLEZL:
+ br = mips_opts.micromips ? "blez" : "blezl";
+ brneg = "bgtz";
+ break;
+ case M_BLTZ:
+ br = "bltz";
+ break;
+ case M_BLTZL:
+ br = mips_opts.micromips ? "bltz" : "bltzl";
+ brneg = "bgez";
+ break;
+ case M_BLTZALL:
gas_assert (mips_opts.micromips);
- gas_assert (mips_opts.insn32);
- macro_build (NULL, "jr", "s", sreg);
- if (mips_opts.noreorder)
- macro_build (NULL, "nop", "");
+ br = mips_opts.insn32 ? "bltzal" : "bltzals";
+ brneg = "bgez";
+ call = 1;
break;
+ default:
+ abort ();
+ }
+ if (mips_opts.micromips && brneg)
+ macro_build_branch_likely (br, brneg, call, ep, "s,p", sreg, ZERO);
+ else
+ macro_build (ep, br, "s,p", sreg);
+}
- case M_LI:
- case M_LI_S:
- load_register (treg, &imm_expr, 0);
- break;
+/* Emit a three-argument branch macro specified by TYPE, using SREG and
+ TREG as the registers tested. EP specifies the branch target. */
- case M_DLI:
- load_register (treg, &imm_expr, 1);
+static void
+macro_build_branch_rsrt (int type, expressionS *ep,
+ unsigned int sreg, unsigned int treg)
+{
+ const char *brneg = NULL;
+ const int call = 0;
+ const char *br;
+
+ switch (type)
+ {
+ case M_BEQ:
+ case M_BEQ_I:
+ br = "beq";
+ break;
+ case M_BEQL:
+ case M_BEQL_I:
+ br = mips_opts.micromips ? "beq" : "beql";
+ brneg = "bne";
break;
+ case M_BNE:
+ case M_BNE_I:
+ br = "bne";
+ break;
+ case M_BNEL:
+ case M_BNEL_I:
+ br = mips_opts.micromips ? "bne" : "bnel";
+ brneg = "beq";
+ break;
+ default:
+ abort ();
+ }
+ if (mips_opts.micromips && brneg)
+ macro_build_branch_likely (br, brneg, call, ep, "s,t,p", sreg, treg);
+ else
+ macro_build (ep, br, "s,t,p", sreg, treg);
+}
- case M_LI_SS:
- if (imm_expr.X_op == O_constant)
- {
- used_at = 1;
- load_register (AT, &imm_expr, 0);
- macro_build (NULL, "mtc1", "t,G", AT, treg);
- break;
- }
- else
- {
- gas_assert (offset_expr.X_op == O_symbol
- && strcmp (segment_name (S_GET_SEGMENT
- (offset_expr.X_add_symbol)),
- ".lit4") == 0
- && offset_expr.X_add_number == 0);
- macro_build (&offset_expr, "lwc1", "T,o(b)", treg,
- BFD_RELOC_MIPS_LITERAL, mips_gp_register);
- break;
- }
+/* Return the high part that should be loaded in order to make the low
+ part of VALUE accessible using an offset of OFFBITS bits. */
- case M_LI_D:
- /* Check if we have a constant in IMM_EXPR. If the GPRs are 64 bits
- wide, IMM_EXPR is the entire value. Otherwise IMM_EXPR is the high
- order 32 bits of the value and the low order 32 bits are either
- zero or in OFFSET_EXPR. */
- if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
- {
- if (HAVE_64BIT_GPRS)
- load_register (treg, &imm_expr, 1);
- else
- {
- int hreg, lreg;
+static offsetT
+offset_high_part (offsetT value, unsigned int offbits)
+{
+ offsetT bias;
+ addressT low_mask;
- if (target_big_endian)
- {
- hreg = treg;
- lreg = treg + 1;
- }
- else
- {
- hreg = treg + 1;
- lreg = treg;
- }
+ if (offbits == 0)
+ return value;
+ bias = 1 << (offbits - 1);
+ low_mask = bias * 2 - 1;
+ return (value + bias) & ~low_mask;
+}
- if (hreg <= 31)
- load_register (hreg, &imm_expr, 0);
- if (lreg <= 31)
- {
- if (offset_expr.X_op == O_absent)
- move_register (lreg, 0);
- else
- {
- gas_assert (offset_expr.X_op == O_constant);
- load_register (lreg, &offset_expr, 0);
- }
- }
- }
- break;
- }
+/* Return true if the value stored in offset_expr and offset_reloc
+ fits into a signed offset of OFFBITS bits. RANGE is the maximum
+ amount that the caller wants to add without inducing overflow
+ and ALIGN is the known alignment of the value in bytes. */
+
+static bfd_boolean
+small_offset_p (unsigned int range, unsigned int align, unsigned int offbits)
+{
+ if (offbits == 16)
+ {
+ /* Accept any relocation operator if overflow isn't a concern. */
+ if (range < align && *offset_reloc != BFD_RELOC_UNUSED)
+ return TRUE;
+
+ /* These relocations are guaranteed not to overflow in correct links. */
+ if (*offset_reloc == BFD_RELOC_MIPS_LITERAL
+ || gprel16_reloc_p (*offset_reloc))
+ return TRUE;
+ }
+ if (offset_expr.X_op == O_constant
+ && offset_high_part (offset_expr.X_add_number, offbits) == 0
+ && offset_high_part (offset_expr.X_add_number + range, offbits) == 0)
+ return TRUE;
+ return FALSE;
+}
+
+/*
+ * Build macros
+ * This routine implements the seemingly endless macro or synthesized
+ * instructions and addressing modes in the mips assembly language. Many
+ * of these macros are simple and are similar to each other. These could
+ * probably be handled by some kind of table or grammar approach instead of
+ * this verbose method. Others are not simple macros but are more like
+ * optimizing code generation.
+ * One interesting optimization is when several store macros appear
+ * consecutively that would load AT with the upper half of the same address.
+ * The ensuing load upper instructions are ommited. This implies some kind
+ * of global optimization. We currently only optimize within a single macro.
+ * For many of the load and store macros if the address is specified as a
+ * constant expression in the first 64k of memory (ie ld $2,0x4000c) we
+ * first load register 'at' with zero and use it as the base register. The
+ * mips assembler simply uses register $zero. Just one tiny optimization
+ * we're missing.
+ */
+static void
+macro (struct mips_cl_insn *ip, char *str)
+{
+ const struct mips_operand_array *operands;
+ unsigned int breg, i;
+ unsigned int tempreg;
+ int mask;
+ int used_at = 0;
+ expressionS label_expr;
+ expressionS expr1;
+ expressionS *ep;
+ const char *s;
+ const char *s2;
+ const char *fmt;
+ int likely = 0;
+ int coproc = 0;
+ int offbits = 16;
+ int call = 0;
+ int jals = 0;
+ int dbl = 0;
+ int imm = 0;
+ int ust = 0;
+ int lp = 0;
+ bfd_boolean large_offset;
+ int off;
+ int hold_mips_optimize;
+ unsigned int align;
+ unsigned int op[MAX_OPERANDS];
- /* We know that sym is in the .rdata section. First we get the
- upper 16 bits of the address. */
- if (mips_pic == NO_PIC)
- {
- macro_build_lui (&offset_expr, AT);
- used_at = 1;
- }
- else
- {
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- used_at = 1;
- }
+ gas_assert (! mips_opts.mips16);
- /* Now we load the register(s). */
- if (HAVE_64BIT_GPRS)
- {
- used_at = 1;
- macro_build (&offset_expr, "ld", "t,o(b)", treg, BFD_RELOC_LO16, AT);
- }
- else
- {
- used_at = 1;
- macro_build (&offset_expr, "lw", "t,o(b)", treg, BFD_RELOC_LO16, AT);
- if (treg != RA)
- {
- /* FIXME: How in the world do we deal with the possible
- overflow here? */
- offset_expr.X_add_number += 4;
- macro_build (&offset_expr, "lw", "t,o(b)",
- treg + 1, BFD_RELOC_LO16, AT);
- }
- }
- break;
+ operands = insn_operands (ip);
+ for (i = 0; i < MAX_OPERANDS; i++)
+ if (operands->operand[i])
+ op[i] = insn_extract_operand (ip, operands->operand[i]);
+ else
+ op[i] = -1;
- case M_LI_DD:
- /* Check if we have a constant in IMM_EXPR. If the FPRs are 64 bits
- wide, IMM_EXPR is the entire value and the GPRs are known to be 64
- bits wide as well. Otherwise IMM_EXPR is the high order 32 bits of
- the value and the low order 32 bits are either zero or in
- OFFSET_EXPR. */
- if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
- {
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_FPRS);
- if (HAVE_64BIT_FPRS)
- {
- gas_assert (HAVE_64BIT_GPRS);
- macro_build (NULL, "dmtc1", "t,S", AT, treg);
- }
- else
- {
- macro_build (NULL, "mtc1", "t,G", AT, treg + 1);
- if (offset_expr.X_op == O_absent)
- macro_build (NULL, "mtc1", "t,G", 0, treg);
- else
- {
- gas_assert (offset_expr.X_op == O_constant);
- load_register (AT, &offset_expr, 0);
- macro_build (NULL, "mtc1", "t,G", AT, treg);
- }
- }
- break;
- }
+ mask = ip->insn_mo->mask;
- gas_assert (offset_expr.X_op == O_symbol
- && offset_expr.X_add_number == 0);
- s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol));
- if (strcmp (s, ".lit8") == 0)
- {
- breg = mips_gp_register;
- offset_reloc[0] = BFD_RELOC_MIPS_LITERAL;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
- }
- else
- {
- gas_assert (strcmp (s, RDATA_SECTION_NAME) == 0);
- used_at = 1;
- if (mips_pic != NO_PIC)
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- else
- {
- /* FIXME: This won't work for a 64 bit address. */
- macro_build_lui (&offset_expr, AT);
- }
+ label_expr.X_op = O_constant;
+ label_expr.X_op_symbol = NULL;
+ label_expr.X_add_symbol = NULL;
+ label_expr.X_add_number = 0;
- breg = AT;
- offset_reloc[0] = BFD_RELOC_LO16;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
- }
- align = 8;
- /* Fall through */
+ expr1.X_op = O_constant;
+ expr1.X_op_symbol = NULL;
+ expr1.X_add_symbol = NULL;
+ expr1.X_add_number = 1;
+ align = 1;
- case M_L_DAB:
- /*
- * The MIPS assembler seems to check for X_add_number not
- * being double aligned and generating:
- * lui at,%hi(foo+1)
- * addu at,at,v1
- * addiu at,at,%lo(foo+1)
- * lwc1 f2,0(at)
- * lwc1 f3,4(at)
- * But, the resulting address is the same after relocation so why
- * generate the extra instruction?
+ switch (mask)
+ {
+ case M_DABS:
+ dbl = 1;
+ case M_ABS:
+ /* bgez $a0,1f
+ move v0,$a0
+ sub v0,$zero,$a0
+ 1:
*/
- /* Itbl support may require additional care here. */
- coproc = 1;
- fmt = "T,o(b)";
- if (CPU_HAS_LDC1_SDC1 (mips_opts.arch))
- {
- s = "ldc1";
- goto ld_st;
- }
- s = "lwc1";
- goto ldd_std;
- case M_S_DAB:
- gas_assert (!mips_opts.micromips);
- /* Itbl support may require additional care here. */
- coproc = 1;
- fmt = "T,o(b)";
- if (CPU_HAS_LDC1_SDC1 (mips_opts.arch))
- {
- s = "sdc1";
- goto ld_st;
- }
- s = "swc1";
- goto ldd_std;
+ start_noreorder ();
- case M_LQ_AB:
- fmt = "t,o(b)";
- s = "lq";
- goto ld;
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "bgez", "s,p", op[1]);
+ if (op[0] == op[1])
+ macro_build (NULL, "nop", "");
+ else
+ move_register (op[0], op[1]);
+ macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", op[0], 0, op[1]);
+ if (mips_opts.micromips)
+ micromips_add_label ();
- case M_SQ_AB:
- fmt = "t,o(b)";
- s = "sq";
- goto ld_st;
+ end_noreorder ();
+ break;
- case M_LD_AB:
- fmt = "t,o(b)";
- if (HAVE_64BIT_GPRS)
+ case M_ADD_I:
+ s = "addi";
+ s2 = "add";
+ goto do_addi;
+ case M_ADDU_I:
+ s = "addiu";
+ s2 = "addu";
+ goto do_addi;
+ case M_DADD_I:
+ dbl = 1;
+ s = "daddi";
+ s2 = "dadd";
+ if (!mips_opts.micromips)
+ goto do_addi;
+ if (imm_expr.X_add_number >= -0x200
+ && imm_expr.X_add_number < 0x200)
{
- s = "ld";
- goto ld;
+ macro_build (NULL, s, "t,r,.", op[0], op[1],
+ (int) imm_expr.X_add_number);
+ break;
}
- s = "lw";
- goto ldd_std;
-
- case M_SD_AB:
- fmt = "t,o(b)";
- if (HAVE_64BIT_GPRS)
+ goto do_addi_i;
+ case M_DADDU_I:
+ dbl = 1;
+ s = "daddiu";
+ s2 = "daddu";
+ do_addi:
+ if (imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
- s = "sd";
- goto ld_st;
+ macro_build (&imm_expr, s, "t,r,j", op[0], op[1], BFD_RELOC_LO16);
+ break;
}
- s = "sw";
-
- ldd_std:
- /* Even on a big endian machine $fn comes before $fn+1. We have
- to adjust when loading from memory. We set coproc if we must
- load $fn+1 first. */
- /* Itbl support may require additional care here. */
- if (!target_big_endian)
- coproc = 0;
+ do_addi_i:
+ used_at = 1;
+ load_register (AT, &imm_expr, dbl);
+ macro_build (NULL, s2, "d,v,t", op[0], op[1], AT);
+ break;
- if (small_offset_p (0, align, 16))
- {
- ep = &offset_expr;
- if (!small_offset_p (4, align, 16))
- {
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", AT, breg,
- -1, offset_reloc[0], offset_reloc[1],
- offset_reloc[2]);
- expr1.X_add_number = 0;
- ep = &expr1;
- breg = AT;
- used_at = 1;
- offset_reloc[0] = BFD_RELOC_LO16;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
- }
- if (strcmp (s, "lw") == 0 && treg == breg)
- {
- ep->X_add_number += 4;
- macro_build (ep, s, fmt, treg + 1, -1, offset_reloc[0],
- offset_reloc[1], offset_reloc[2], breg);
- ep->X_add_number -= 4;
- macro_build (ep, s, fmt, treg, -1, offset_reloc[0],
- offset_reloc[1], offset_reloc[2], breg);
- }
+ case M_AND_I:
+ s = "andi";
+ s2 = "and";
+ goto do_bit;
+ case M_OR_I:
+ s = "ori";
+ s2 = "or";
+ goto do_bit;
+ case M_NOR_I:
+ s = "";
+ s2 = "nor";
+ goto do_bit;
+ case M_XOR_I:
+ s = "xori";
+ s2 = "xor";
+ do_bit:
+ if (imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
+ {
+ if (mask != M_NOR_I)
+ macro_build (&imm_expr, s, "t,r,i", op[0], op[1], BFD_RELOC_LO16);
else
{
- macro_build (ep, s, fmt, coproc ? treg + 1 : treg, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2],
- breg);
- ep->X_add_number += 4;
- macro_build (ep, s, fmt, coproc ? treg : treg + 1, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2],
- breg);
+ macro_build (&imm_expr, "ori", "t,r,i",
+ op[0], op[1], BFD_RELOC_LO16);
+ macro_build (NULL, "nor", "d,v,t", op[0], op[0], 0);
}
break;
}
- if (offset_expr.X_op != O_symbol
- && offset_expr.X_op != O_constant)
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, s2, "d,v,t", op[0], op[1], AT);
+ break;
+
+ case M_BALIGN:
+ switch (imm_expr.X_add_number)
{
- as_bad (_("Expression too complex"));
- offset_expr.X_op = O_constant;
+ case 0:
+ macro_build (NULL, "nop", "");
+ break;
+ case 2:
+ macro_build (NULL, "packrl.ph", "d,s,t", op[0], op[0], op[1]);
+ break;
+ case 1:
+ case 3:
+ macro_build (NULL, "balign", "t,s,2", op[0], op[1],
+ (int) imm_expr.X_add_number);
+ break;
+ default:
+ as_bad (_("BALIGN immediate not 0, 1, 2 or 3 (%lu)"),
+ (unsigned long) imm_expr.X_add_number);
+ break;
}
+ break;
- if (HAVE_32BIT_ADDRESSES
- && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
- {
- char value [32];
+ case M_BC1FL:
+ case M_BC1TL:
+ case M_BC2FL:
+ case M_BC2TL:
+ gas_assert (mips_opts.micromips);
+ macro_build_branch_ccl (mask, &offset_expr,
+ EXTRACT_OPERAND (1, BCC, *ip));
+ break;
- sprintf_vma (value, offset_expr.X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ case M_BEQ_I:
+ case M_BEQL_I:
+ case M_BNE_I:
+ case M_BNEL_I:
+ if (imm_expr.X_add_number == 0)
+ op[1] = 0;
+ else
+ {
+ op[1] = AT;
+ used_at = 1;
+ load_register (op[1], &imm_expr, HAVE_64BIT_GPRS);
}
+ /* Fall through. */
+ case M_BEQL:
+ case M_BNEL:
+ macro_build_branch_rsrt (mask, &offset_expr, op[0], op[1]);
+ break;
- if (mips_pic == NO_PIC || offset_expr.X_op == O_constant)
+ case M_BGEL:
+ likely = 1;
+ case M_BGE:
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[1]);
+ else
{
- /* If this is a reference to a GP relative symbol, we want
- <op> $treg,<sym>($gp) (BFD_RELOC_GPREL16)
- <op> $treg+1,<sym>+4($gp) (BFD_RELOC_GPREL16)
- If we have a base register, we use this
- addu $at,$breg,$gp
- <op> $treg,<sym>($at) (BFD_RELOC_GPREL16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_GPREL16)
- If this is not a GP relative symbol, we want
- lui $at,<sym> (BFD_RELOC_HI16_S)
- <op> $treg,<sym>($at) (BFD_RELOC_LO16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_LO16)
- If there is a base register, we add it to $at after the
- lui instruction. If there is a constant, we always use
- the last case. */
- if (offset_expr.X_op == O_symbol
- && (valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && !nopic_need_relax (offset_expr.X_add_symbol, 1))
- {
- relax_start (offset_expr.X_add_symbol);
- if (breg == 0)
- {
- tempreg = mips_gp_register;
- }
- else
- {
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- AT, breg, mips_gp_register);
- tempreg = AT;
- used_at = 1;
- }
-
- /* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
- BFD_RELOC_GPREL16, tempreg);
- offset_expr.X_add_number += 4;
-
- /* Set mips_optimize to 2 to avoid inserting an
- undesired nop. */
- hold_mips_optimize = mips_optimize;
- mips_optimize = 2;
- /* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
- BFD_RELOC_GPREL16, tempreg);
- mips_optimize = hold_mips_optimize;
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, op[0], op[1]);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
+ }
+ break;
- relax_switch ();
+ case M_BGEZL:
+ case M_BGEZALL:
+ case M_BGTZL:
+ case M_BLEZL:
+ case M_BLTZL:
+ case M_BLTZALL:
+ macro_build_branch_rs (mask, &offset_expr, op[0]);
+ break;
- offset_expr.X_add_number -= 4;
- }
- used_at = 1;
- if (offset_high_part (offset_expr.X_add_number, 16)
- != offset_high_part (offset_expr.X_add_number + 4, 16))
- {
- load_address (AT, &offset_expr, &used_at);
- offset_expr.X_op = O_constant;
- offset_expr.X_add_number = 0;
- }
+ case M_BGTL_I:
+ likely = 1;
+ case M_BGT_I:
+ /* Check for > max integer. */
+ if (imm_expr.X_add_number >= GPR_SMAX)
+ {
+ do_false:
+ /* Result is always false. */
+ if (! likely)
+ macro_build (NULL, "nop", "");
else
- macro_build_lui (&offset_expr, AT);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
- /* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
- BFD_RELOC_LO16, AT);
- /* FIXME: How do we handle overflow here? */
- offset_expr.X_add_number += 4;
- /* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
- BFD_RELOC_LO16, AT);
- if (mips_relax.sequence)
- relax_end ();
+ macro_build_branch_rsrt (M_BNEL, &offset_expr, ZERO, ZERO);
+ break;
}
- else if (!mips_big_got)
+ ++imm_expr.X_add_number;
+ /* FALLTHROUGH */
+ case M_BGE_I:
+ case M_BGEL_I:
+ if (mask == M_BGEL_I)
+ likely = 1;
+ if (imm_expr.X_add_number == 0)
{
- /* If this is a reference to an external symbol, we want
- lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- <op> $treg,0($at)
- <op> $treg+1,4($at)
- Otherwise we want
- lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- <op> $treg,<sym>($at) (BFD_RELOC_LO16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_LO16)
- If there is a base register we add it to $at before the
- lwc1 instructions. If there is a constant we include it
- in the lwc1 instructions. */
- used_at = 1;
- expr1.X_add_number = offset_expr.X_add_number;
- if (expr1.X_add_number < -0x8000
- || expr1.X_add_number >= 0x8000 - 4)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- load_got_offset (AT, &offset_expr);
- load_delay_nop ();
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
-
- /* Set mips_optimize to 2 to avoid inserting an undesired
- nop. */
- hold_mips_optimize = mips_optimize;
- mips_optimize = 2;
-
- /* Itbl support may require additional care here. */
- relax_start (offset_expr.X_add_symbol);
- macro_build (&expr1, s, fmt, coproc ? treg + 1 : treg,
- BFD_RELOC_LO16, AT);
- expr1.X_add_number += 4;
- macro_build (&expr1, s, fmt, coproc ? treg : treg + 1,
- BFD_RELOC_LO16, AT);
- relax_switch ();
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
- BFD_RELOC_LO16, AT);
- offset_expr.X_add_number += 4;
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
- BFD_RELOC_LO16, AT);
- relax_end ();
-
- mips_optimize = hold_mips_optimize;
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ,
+ &offset_expr, op[0]);
+ break;
}
- else if (mips_big_got)
+ if (imm_expr.X_add_number == 1)
{
- int gpdelay;
-
- /* If this is a reference to an external symbol, we want
- lui $at,<sym> (BFD_RELOC_MIPS_GOT_HI16)
- addu $at,$at,$gp
- lw $at,<sym>($at) (BFD_RELOC_MIPS_GOT_LO16)
- nop
- <op> $treg,0($at)
- <op> $treg+1,4($at)
- Otherwise we want
- lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
- nop
- <op> $treg,<sym>($at) (BFD_RELOC_LO16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_LO16)
- If there is a base register we add it to $at before the
- lwc1 instructions. If there is a constant we include it
- in the lwc1 instructions. */
- used_at = 1;
- expr1.X_add_number = offset_expr.X_add_number;
- offset_expr.X_add_number = 0;
- if (expr1.X_add_number < -0x8000
- || expr1.X_add_number >= 0x8000 - 4)
- as_bad (_("PIC code offset overflow (max 16 signed bits)"));
- gpdelay = reg_needs_delay (mips_gp_register);
- relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", LUI_FMT,
- AT, BFD_RELOC_MIPS_GOT_HI16);
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- AT, AT, mips_gp_register);
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
- AT, BFD_RELOC_MIPS_GOT_LO16, AT);
- load_delay_nop ();
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
- /* Itbl support may require additional care here. */
- macro_build (&expr1, s, fmt, coproc ? treg + 1 : treg,
- BFD_RELOC_LO16, AT);
- expr1.X_add_number += 4;
-
- /* Set mips_optimize to 2 to avoid inserting an undesired
- nop. */
- hold_mips_optimize = mips_optimize;
- mips_optimize = 2;
- /* Itbl support may require additional care here. */
- macro_build (&expr1, s, fmt, coproc ? treg : treg + 1,
- BFD_RELOC_LO16, AT);
- mips_optimize = hold_mips_optimize;
- expr1.X_add_number -= 4;
-
- relax_switch ();
- offset_expr.X_add_number = expr1.X_add_number;
- if (gpdelay)
- macro_build (NULL, "nop", "");
- macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
- BFD_RELOC_MIPS_GOT16, mips_gp_register);
- load_delay_nop ();
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
- /* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
- BFD_RELOC_LO16, AT);
- offset_expr.X_add_number += 4;
-
- /* Set mips_optimize to 2 to avoid inserting an undesired
- nop. */
- hold_mips_optimize = mips_optimize;
- mips_optimize = 2;
- /* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
- BFD_RELOC_LO16, AT);
- mips_optimize = hold_mips_optimize;
- relax_end ();
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ,
+ &offset_expr, op[0]);
+ break;
+ }
+ if (imm_expr.X_add_number <= GPR_SMIN)
+ {
+ do_true:
+ /* result is always true */
+ as_warn (_("branch %s is always true"), ip->insn_mo->name);
+ macro_build (&offset_expr, "b", "p");
+ break;
}
+ used_at = 1;
+ set_at (op[0], 0);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
+ break;
+
+ case M_BGEUL:
+ likely = 1;
+ case M_BGEU:
+ if (op[1] == 0)
+ goto do_true;
+ else if (op[0] == 0)
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, ZERO, op[1]);
else
- abort ();
+ {
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, op[0], op[1]);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
+ }
+ break;
+ case M_BGTUL_I:
+ likely = 1;
+ case M_BGTU_I:
+ if (op[0] == 0
+ || (HAVE_32BIT_GPRS
+ && imm_expr.X_add_number == -1))
+ goto do_false;
+ ++imm_expr.X_add_number;
+ /* FALLTHROUGH */
+ case M_BGEU_I:
+ case M_BGEUL_I:
+ if (mask == M_BGEUL_I)
+ likely = 1;
+ if (imm_expr.X_add_number == 0)
+ goto do_true;
+ else if (imm_expr.X_add_number == 1)
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, op[0], ZERO);
+ else
+ {
+ used_at = 1;
+ set_at (op[0], 1);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
+ }
break;
-
- case M_SAA_AB:
- s = "saa";
- offbits = 0;
- fmt = "t,(b)";
- goto ld_st;
- case M_SAAD_AB:
- s = "saad";
- offbits = 0;
- fmt = "t,(b)";
- goto ld_st;
- /* New code added to support COPZ instructions.
- This code builds table entries out of the macros in mip_opcodes.
- R4000 uses interlocks to handle coproc delays.
- Other chips (like the R3000) require nops to be inserted for delays.
+ case M_BGTL:
+ likely = 1;
+ case M_BGT:
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[1]);
+ else
+ {
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, op[1], op[0]);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
+ }
+ break;
- FIXME: Currently, we require that the user handle delays.
- In order to fill delay slots for non-interlocked chips,
- we must have a way to specify delays based on the coprocessor.
- Eg. 4 cycles if load coproc reg from memory, 1 if in cache, etc.
- What are the side-effects of the cop instruction?
- What cache support might we have and what are its effects?
- Both coprocessor & memory require delays. how long???
- What registers are read/set/modified?
+ case M_BGTUL:
+ likely = 1;
+ case M_BGTU:
+ if (op[1] == 0)
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, op[0], ZERO);
+ else if (op[0] == 0)
+ goto do_false;
+ else
+ {
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, op[1], op[0]);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
+ }
+ break;
- If an itbl is provided to interpret cop instructions,
- this knowledge can be encoded in the itbl spec. */
+ case M_BLEL:
+ likely = 1;
+ case M_BLE:
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, op[1]);
+ else
+ {
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, op[1], op[0]);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
+ }
+ break;
- case M_COP0:
- s = "c0";
- goto copz;
- case M_COP1:
- s = "c1";
- goto copz;
- case M_COP2:
- s = "c2";
- goto copz;
- case M_COP3:
- s = "c3";
- copz:
- gas_assert (!mips_opts.micromips);
- /* For now we just do C (same as Cz). The parameter will be
- stored in insn_opcode by mips_ip. */
- macro_build (NULL, s, "C", ip->insn_opcode);
+ case M_BLEL_I:
+ likely = 1;
+ case M_BLE_I:
+ if (imm_expr.X_add_number >= GPR_SMAX)
+ goto do_true;
+ ++imm_expr.X_add_number;
+ /* FALLTHROUGH */
+ case M_BLT_I:
+ case M_BLTL_I:
+ if (mask == M_BLTL_I)
+ likely = 1;
+ if (imm_expr.X_add_number == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[0]);
+ else if (imm_expr.X_add_number == 1)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[0]);
+ else
+ {
+ used_at = 1;
+ set_at (op[0], 0);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
+ }
break;
- case M_MOVE:
- move_register (dreg, sreg);
+ case M_BLEUL:
+ likely = 1;
+ case M_BLEU:
+ if (op[1] == 0)
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, op[0], ZERO);
+ else if (op[0] == 0)
+ goto do_true;
+ else
+ {
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, op[1], op[0]);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
+ }
break;
- case M_MOVEP:
- gas_assert (mips_opts.micromips);
- gas_assert (mips_opts.insn32);
- dreg = micromips_to_32_reg_h_map1[EXTRACT_OPERAND (1, MH, *ip)];
- breg = micromips_to_32_reg_h_map2[EXTRACT_OPERAND (1, MH, *ip)];
- sreg = micromips_to_32_reg_m_map[EXTRACT_OPERAND (1, MM, *ip)];
- treg = micromips_to_32_reg_n_map[EXTRACT_OPERAND (1, MN, *ip)];
- move_register (dreg, sreg);
- move_register (breg, treg);
+ case M_BLEUL_I:
+ likely = 1;
+ case M_BLEU_I:
+ if (op[0] == 0
+ || (HAVE_32BIT_GPRS
+ && imm_expr.X_add_number == -1))
+ goto do_true;
+ ++imm_expr.X_add_number;
+ /* FALLTHROUGH */
+ case M_BLTU_I:
+ case M_BLTUL_I:
+ if (mask == M_BLTUL_I)
+ likely = 1;
+ if (imm_expr.X_add_number == 0)
+ goto do_false;
+ else if (imm_expr.X_add_number == 1)
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, op[0], ZERO);
+ else
+ {
+ used_at = 1;
+ set_at (op[0], 1);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
+ }
break;
- case M_DMUL:
- dbl = 1;
- case M_MUL:
- if (mips_opts.arch == CPU_R5900)
- {
- macro_build (NULL, dbl ? "dmultu" : "multu", "d,s,t", dreg, sreg, treg);
- }
+ case M_BLTL:
+ likely = 1;
+ case M_BLT:
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, op[1]);
else
- {
- macro_build (NULL, dbl ? "dmultu" : "multu", "s,t", sreg, treg);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
- }
+ {
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, op[0], op[1]);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
+ }
break;
- case M_DMUL_I:
- dbl = 1;
- case M_MUL_I:
- /* The MIPS assembler some times generates shifts and adds. I'm
- not trying to be that fancy. GCC should do this for us
- anyway. */
- used_at = 1;
- load_register (AT, &imm_expr, dbl);
- macro_build (NULL, dbl ? "dmult" : "mult", "s,t", sreg, AT);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ case M_BLTUL:
+ likely = 1;
+ case M_BLTU:
+ if (op[1] == 0)
+ goto do_false;
+ else if (op[0] == 0)
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, ZERO, op[1]);
+ else
+ {
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, op[0], op[1]);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
+ }
break;
- case M_DMULO_I:
+ case M_DDIV_3:
dbl = 1;
- case M_MULO_I:
- imm = 1;
- goto do_mulo;
-
- case M_DMULO:
+ case M_DIV_3:
+ s = "mflo";
+ goto do_div3;
+ case M_DREM_3:
dbl = 1;
- case M_MULO:
- do_mulo:
+ case M_REM_3:
+ s = "mfhi";
+ do_div3:
+ if (op[2] == 0)
+ {
+ as_warn (_("divide by zero"));
+ if (mips_trap)
+ macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
+ else
+ macro_build (NULL, "break", BRK_FMT, 7);
+ break;
+ }
+
start_noreorder ();
- used_at = 1;
- if (imm)
- load_register (AT, &imm_expr, dbl);
- macro_build (NULL, dbl ? "dmult" : "mult", "s,t", sreg, imm ? AT : treg);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
- macro_build (NULL, dbl ? "dsra32" : "sra", SHFT_FMT, dreg, dreg, RA);
- macro_build (NULL, "mfhi", MFHL_FMT, AT);
if (mips_trap)
- macro_build (NULL, "tne", TRAP_FMT, dreg, AT, 6);
+ {
+ macro_build (NULL, "teq", TRAP_FMT, op[2], ZERO, 7);
+ macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", op[1], op[2]);
+ }
else
{
if (mips_opts.micromips)
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = 8;
- macro_build (&label_expr, "beq", "s,t,p", dreg, AT);
- macro_build (NULL, "nop", "");
- macro_build (NULL, "break", BRK_FMT, 6);
+ macro_build (&label_expr, "bne", "s,t,p", op[2], ZERO);
+ macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", op[1], op[2]);
+ macro_build (NULL, "break", BRK_FMT, 7);
if (mips_opts.micromips)
micromips_add_label ();
}
- end_noreorder ();
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
- break;
-
- case M_DMULOU_I:
- dbl = 1;
- case M_MULOU_I:
- imm = 1;
- goto do_mulou;
-
- case M_DMULOU:
- dbl = 1;
- case M_MULOU:
- do_mulou:
- start_noreorder ();
+ expr1.X_add_number = -1;
used_at = 1;
- if (imm)
- load_register (AT, &imm_expr, dbl);
- macro_build (NULL, dbl ? "dmultu" : "multu", "s,t",
- sreg, imm ? AT : treg);
- macro_build (NULL, "mfhi", MFHL_FMT, AT);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ load_register (AT, &expr1, dbl);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = mips_trap ? (dbl ? 12 : 8) : (dbl ? 20 : 16);
+ macro_build (&label_expr, "bne", "s,t,p", op[2], AT);
+ if (dbl)
+ {
+ expr1.X_add_number = 1;
+ load_register (AT, &expr1, dbl);
+ macro_build (NULL, "dsll32", SHFT_FMT, AT, AT, 31);
+ }
+ else
+ {
+ expr1.X_add_number = 0x80000000;
+ macro_build (&expr1, "lui", LUI_FMT, AT, BFD_RELOC_HI16);
+ }
if (mips_trap)
- macro_build (NULL, "tne", TRAP_FMT, AT, ZERO, 6);
+ {
+ macro_build (NULL, "teq", TRAP_FMT, op[1], AT, 6);
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ end_noreorder ();
+ }
else
{
if (mips_opts.micromips)
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = 8;
- macro_build (&label_expr, "beq", "s,t,p", AT, ZERO);
+ macro_build (&label_expr, "bne", "s,t,p", op[1], AT);
macro_build (NULL, "nop", "");
+
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ end_noreorder ();
+
macro_build (NULL, "break", BRK_FMT, 6);
- if (mips_opts.micromips)
- micromips_add_label ();
}
- end_noreorder ();
+ if (mips_opts.micromips)
+ micromips_add_label ();
+ macro_build (NULL, s, MFHL_FMT, op[0]);
break;
- case M_DROL:
- if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
+ case M_DIV_3I:
+ s = "div";
+ s2 = "mflo";
+ goto do_divi;
+ case M_DIVU_3I:
+ s = "divu";
+ s2 = "mflo";
+ goto do_divi;
+ case M_REM_3I:
+ s = "div";
+ s2 = "mfhi";
+ goto do_divi;
+ case M_REMU_3I:
+ s = "divu";
+ s2 = "mfhi";
+ goto do_divi;
+ case M_DDIV_3I:
+ dbl = 1;
+ s = "ddiv";
+ s2 = "mflo";
+ goto do_divi;
+ case M_DDIVU_3I:
+ dbl = 1;
+ s = "ddivu";
+ s2 = "mflo";
+ goto do_divi;
+ case M_DREM_3I:
+ dbl = 1;
+ s = "ddiv";
+ s2 = "mfhi";
+ goto do_divi;
+ case M_DREMU_3I:
+ dbl = 1;
+ s = "ddivu";
+ s2 = "mfhi";
+ do_divi:
+ if (imm_expr.X_add_number == 0)
{
- if (dreg == sreg)
- {
- tempreg = AT;
- used_at = 1;
- }
+ as_warn (_("divide by zero"));
+ if (mips_trap)
+ macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
else
- {
- tempreg = dreg;
- }
- macro_build (NULL, "dnegu", "d,w", tempreg, treg);
- macro_build (NULL, "drorv", "d,t,s", dreg, sreg, tempreg);
+ macro_build (NULL, "break", BRK_FMT, 7);
break;
}
- used_at = 1;
- macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "dsrlv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "dsllv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
- break;
-
- case M_ROL:
- if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
+ if (imm_expr.X_add_number == 1)
{
- if (dreg == sreg)
- {
- tempreg = AT;
- used_at = 1;
- }
+ if (strcmp (s2, "mflo") == 0)
+ move_register (op[0], op[1]);
else
- {
- tempreg = dreg;
- }
- macro_build (NULL, "negu", "d,w", tempreg, treg);
- macro_build (NULL, "rorv", "d,t,s", dreg, sreg, tempreg);
+ move_register (op[0], ZERO);
break;
}
- used_at = 1;
- macro_build (NULL, "subu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "srlv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "sllv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
- break;
-
- case M_DROL_I:
- {
- unsigned int rot;
- char *l;
- char *rr;
-
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
- rot = imm_expr.X_add_number & 0x3f;
- if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
- {
- rot = (64 - rot) & 0x3f;
- if (rot >= 32)
- macro_build (NULL, "dror32", SHFT_FMT, dreg, sreg, rot - 32);
- else
- macro_build (NULL, "dror", SHFT_FMT, dreg, sreg, rot);
- break;
- }
- if (rot == 0)
- {
- macro_build (NULL, "dsrl", SHFT_FMT, dreg, sreg, 0);
- break;
- }
- l = (rot < 0x20) ? "dsll" : "dsll32";
- rr = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32";
- rot &= 0x1f;
- used_at = 1;
- macro_build (NULL, l, SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, rr, SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
- }
- break;
-
- case M_ROL_I:
- {
- unsigned int rot;
-
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
- rot = imm_expr.X_add_number & 0x1f;
- if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
- {
- macro_build (NULL, "ror", SHFT_FMT, dreg, sreg, (32 - rot) & 0x1f);
- break;
- }
- if (rot == 0)
- {
- macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, 0);
- break;
- }
- used_at = 1;
- macro_build (NULL, "sll", SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
- }
- break;
-
- case M_DROR:
- if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
+ if (imm_expr.X_add_number == -1 && s[strlen (s) - 1] != 'u')
{
- macro_build (NULL, "drorv", "d,t,s", dreg, sreg, treg);
+ if (strcmp (s2, "mflo") == 0)
+ macro_build (NULL, dbl ? "dneg" : "neg", "d,w", op[0], op[1]);
+ else
+ move_register (op[0], ZERO);
break;
}
+
used_at = 1;
- macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "dsllv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "dsrlv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ load_register (AT, &imm_expr, dbl);
+ macro_build (NULL, s, "z,s,t", op[1], AT);
+ macro_build (NULL, s2, MFHL_FMT, op[0]);
break;
- case M_ROR:
- if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
+ case M_DIVU_3:
+ s = "divu";
+ s2 = "mflo";
+ goto do_divu3;
+ case M_REMU_3:
+ s = "divu";
+ s2 = "mfhi";
+ goto do_divu3;
+ case M_DDIVU_3:
+ s = "ddivu";
+ s2 = "mflo";
+ goto do_divu3;
+ case M_DREMU_3:
+ s = "ddivu";
+ s2 = "mfhi";
+ do_divu3:
+ start_noreorder ();
+ if (mips_trap)
{
- macro_build (NULL, "rorv", "d,t,s", dreg, sreg, treg);
- break;
+ macro_build (NULL, "teq", TRAP_FMT, op[2], ZERO, 7);
+ macro_build (NULL, s, "z,s,t", op[1], op[2]);
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ end_noreorder ();
}
- used_at = 1;
- macro_build (NULL, "subu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "sllv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "srlv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
- break;
-
- case M_DROR_I:
- {
- unsigned int rot;
- char *l;
- char *rr;
-
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
- rot = imm_expr.X_add_number & 0x3f;
- if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
- {
- if (rot >= 32)
- macro_build (NULL, "dror32", SHFT_FMT, dreg, sreg, rot - 32);
- else
- macro_build (NULL, "dror", SHFT_FMT, dreg, sreg, rot);
- break;
- }
- if (rot == 0)
- {
- macro_build (NULL, "dsrl", SHFT_FMT, dreg, sreg, 0);
- break;
- }
- rr = (rot < 0x20) ? "dsrl" : "dsrl32";
- l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32";
- rot &= 0x1f;
- used_at = 1;
- macro_build (NULL, rr, SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, l, SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
- }
- break;
-
- case M_ROR_I:
- {
- unsigned int rot;
-
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
- rot = imm_expr.X_add_number & 0x1f;
- if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
- {
- macro_build (NULL, "ror", SHFT_FMT, dreg, sreg, rot);
- break;
- }
- if (rot == 0)
- {
- macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, 0);
- break;
- }
- used_at = 1;
- macro_build (NULL, "srl", SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, "sll", SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
- }
- break;
-
- case M_SEQ:
- if (sreg == 0)
- macro_build (&expr1, "sltiu", "t,r,j", dreg, treg, BFD_RELOC_LO16);
- else if (treg == 0)
- macro_build (&expr1, "sltiu", "t,r,j", dreg, sreg, BFD_RELOC_LO16);
else
{
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, treg);
- macro_build (&expr1, "sltiu", "t,r,j", dreg, dreg, BFD_RELOC_LO16);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "bne", "s,t,p", op[2], ZERO);
+ macro_build (NULL, s, "z,s,t", op[1], op[2]);
+
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ end_noreorder ();
+ macro_build (NULL, "break", BRK_FMT, 7);
+ if (mips_opts.micromips)
+ micromips_add_label ();
}
+ macro_build (NULL, s2, MFHL_FMT, op[0]);
break;
- case M_SEQ_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- {
- macro_build (&expr1, "sltiu", "t,r,j", dreg, sreg, BFD_RELOC_LO16);
- break;
- }
- if (sreg == 0)
- {
- as_warn (_("Instruction %s: result is always false"),
- ip->insn_mo->name);
- move_register (dreg, 0);
- break;
- }
- if (CPU_HAS_SEQ (mips_opts.arch)
- && -512 <= imm_expr.X_add_number
- && imm_expr.X_add_number < 512)
- {
- macro_build (NULL, "seqi", "t,r,+Q", dreg, sreg,
- (int) imm_expr.X_add_number);
- break;
- }
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= 0
- && imm_expr.X_add_number < 0x10000)
- {
- macro_build (&imm_expr, "xori", "t,r,i", dreg, sreg, BFD_RELOC_LO16);
- }
- else if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x8000
- && imm_expr.X_add_number < 0)
+ case M_DLCA_AB:
+ dbl = 1;
+ case M_LCA_AB:
+ call = 1;
+ goto do_la;
+ case M_DLA_AB:
+ dbl = 1;
+ case M_LA_AB:
+ do_la:
+ /* Load the address of a symbol into a register. If breg is not
+ zero, we then add a base register to it. */
+
+ breg = op[2];
+ if (dbl && HAVE_32BIT_GPRS)
+ as_warn (_("dla used to load 32-bit register"));
+
+ if (!dbl && HAVE_64BIT_OBJECTS)
+ as_warn (_("la used to load 64-bit address"));
+
+ if (small_offset_p (0, align, 16))
{
- imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu",
- "t,r,j", dreg, sreg, BFD_RELOC_LO16);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", op[0], breg,
+ -1, offset_reloc[0], offset_reloc[1], offset_reloc[2]);
+ break;
}
- else if (CPU_HAS_SEQ (mips_opts.arch))
+
+ if (mips_opts.at && (op[0] == breg))
{
+ tempreg = AT;
used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "seq", "d,v,t", dreg, sreg, AT);
- break;
}
else
+ tempreg = op[0];
+
+ if (offset_expr.X_op != O_symbol
+ && offset_expr.X_op != O_constant)
{
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, AT);
- used_at = 1;
+ as_bad (_("expression too complex"));
+ offset_expr.X_op = O_constant;
}
- macro_build (&expr1, "sltiu", "t,r,j", dreg, dreg, BFD_RELOC_LO16);
- break;
-
- case M_SGE: /* sreg >= treg <==> not (sreg < treg) */
- s = "slt";
- goto sge;
- case M_SGEU:
- s = "sltu";
- sge:
- macro_build (NULL, s, "d,v,t", dreg, sreg, treg);
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
- break;
- case M_SGE_I: /* sreg >= I <==> not (sreg < I) */
- case M_SGEU_I:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
- && imm_expr.X_add_number < 0x8000)
+ if (offset_expr.X_op == O_constant)
+ load_register (tempreg, &offset_expr, HAVE_64BIT_ADDRESSES);
+ else if (mips_pic == NO_PIC)
{
- macro_build (&imm_expr, mask == M_SGE_I ? "slti" : "sltiu", "t,r,j",
- dreg, sreg, BFD_RELOC_LO16);
+ /* If this is a reference to a GP relative symbol, we want
+ addiu $tempreg,$gp,<sym> (BFD_RELOC_GPREL16)
+ Otherwise we want
+ lui $tempreg,<sym> (BFD_RELOC_HI16_S)
+ addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
+ If we have a constant, we need two instructions anyhow,
+ so we may as well always use the latter form.
+
+ With 64bit address space and a usable $at we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ lui $at,<sym> (BFD_RELOC_HI16_S)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ daddiu $at,<sym> (BFD_RELOC_LO16)
+ dsll32 $tempreg,0
+ daddu $tempreg,$tempreg,$at
+
+ If $at is already in use, we use a path which is suboptimal
+ on superscalar processors.
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ dsll $tempreg,16
+ daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
+ dsll $tempreg,16
+ daddiu $tempreg,<sym> (BFD_RELOC_LO16)
+
+ For GP relative symbols in 64bit address space we can use
+ the same sequence as in 32bit address space. */
+ if (HAVE_64BIT_SYMBOLS)
+ {
+ if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, mips_gp_register, BFD_RELOC_GPREL16);
+ relax_switch ();
+ }
+
+ if (used_at == 0 && mips_opts.at)
+ {
+ macro_build (&offset_expr, "lui", LUI_FMT,
+ tempreg, BFD_RELOC_MIPS_HIGHEST);
+ macro_build (&offset_expr, "lui", LUI_FMT,
+ AT, BFD_RELOC_HI16_S);
+ macro_build (&offset_expr, "daddiu", "t,r,j",
+ tempreg, tempreg, BFD_RELOC_MIPS_HIGHER);
+ macro_build (&offset_expr, "daddiu", "t,r,j",
+ AT, AT, BFD_RELOC_LO16);
+ macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0);
+ macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT);
+ used_at = 1;
+ }
+ else
+ {
+ macro_build (&offset_expr, "lui", LUI_FMT,
+ tempreg, BFD_RELOC_MIPS_HIGHEST);
+ macro_build (&offset_expr, "daddiu", "t,r,j",
+ tempreg, tempreg, BFD_RELOC_MIPS_HIGHER);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
+ macro_build (&offset_expr, "daddiu", "t,r,j",
+ tempreg, tempreg, BFD_RELOC_HI16_S);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
+ macro_build (&offset_expr, "daddiu", "t,r,j",
+ tempreg, tempreg, BFD_RELOC_LO16);
+ }
+
+ if (mips_relax.sequence)
+ relax_end ();
+ }
+ else
+ {
+ if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, mips_gp_register, BFD_RELOC_GPREL16);
+ relax_switch ();
+ }
+ if (!IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
+ as_bad (_("offset too large"));
+ macro_build_lui (&offset_expr, tempreg);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, tempreg, BFD_RELOC_LO16);
+ if (mips_relax.sequence)
+ relax_end ();
+ }
}
- else
+ else if (!mips_big_got && !HAVE_NEWABI)
{
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, mask == M_SGE_I ? "slt" : "sltu", "d,v,t",
- dreg, sreg, AT);
- used_at = 1;
- }
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
- break;
+ int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
- case M_SGT: /* sreg > treg <==> treg < sreg */
- s = "slt";
- goto sgt;
- case M_SGTU:
- s = "sltu";
- sgt:
- macro_build (NULL, s, "d,v,t", dreg, treg, sreg);
- break;
+ /* If this is a reference to an external symbol, and there
+ is no constant, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ or for lca or if tempreg is PIC_CALL_REG
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
+ For a local symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- case M_SGT_I: /* sreg > I <==> I < sreg */
- s = "slt";
- goto sgti;
- case M_SGTU_I:
- s = "sltu";
- sgti:
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s, "d,v,t", dreg, AT, sreg);
- break;
+ If we have a small constant, and this is a reference to
+ an external symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<constant>
+ For a local symbol, we want the same instruction
+ sequence, but we output a BFD_RELOC_LO16 reloc on the
+ addiu instruction.
- case M_SLE: /* sreg <= treg <==> treg >= sreg <==> not (treg < sreg) */
- s = "slt";
- goto sle;
- case M_SLEU:
- s = "sltu";
- sle:
- macro_build (NULL, s, "d,v,t", dreg, treg, sreg);
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
- break;
+ If we have a large constant, and this is a reference to
+ an external symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ lui $at,<hiconstant>
+ addiu $at,$at,<loconstant>
+ addu $tempreg,$tempreg,$at
+ For a local symbol, we want the same instruction
+ sequence, but we output a BFD_RELOC_LO16 reloc on the
+ addiu instruction.
+ */
- case M_SLE_I: /* sreg <= I <==> I >= sreg <==> not (I < sreg) */
- s = "slt";
- goto slei;
- case M_SLEU_I:
- s = "sltu";
- slei:
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s, "d,v,t", dreg, AT, sreg);
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
- break;
+ if (offset_expr.X_add_number == 0)
+ {
+ if (mips_pic == SVR4_PIC
+ && breg == 0
+ && (call || tempreg == PIC_CALL_REG))
+ lw_reloc_type = (int) BFD_RELOC_MIPS_CALL16;
- case M_SLT_I:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
- && imm_expr.X_add_number < 0x8000)
- {
- macro_build (&imm_expr, "slti", "t,r,j", dreg, sreg, BFD_RELOC_LO16);
- break;
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ lw_reloc_type, mips_gp_register);
+ if (breg != 0)
+ {
+ /* We're going to put in an addu instruction using
+ tempreg, so we may as well insert the nop right
+ now. */
+ load_delay_nop ();
+ }
+ relax_switch ();
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ tempreg, BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ load_delay_nop ();
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, tempreg, BFD_RELOC_LO16);
+ relax_end ();
+ /* FIXME: If breg == 0, and the next instruction uses
+ $tempreg, then if this variant case is used an extra
+ nop will be generated. */
+ }
+ else if (offset_expr.X_add_number >= -0x8000
+ && offset_expr.X_add_number < 0x8000)
+ {
+ load_got_offset (tempreg, &offset_expr);
+ load_delay_nop ();
+ add_got_offset (tempreg, &offset_expr);
+ }
+ else
+ {
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number =
+ SEXT_16BIT (offset_expr.X_add_number);
+ load_got_offset (tempreg, &offset_expr);
+ offset_expr.X_add_number = expr1.X_add_number;
+ /* If we are going to add in a base register, and the
+ target register and the base register are the same,
+ then we are using AT as a temporary register. Since
+ we want to load the constant into AT, we add our
+ current AT (from the global offset table) and the
+ register into the register now, and pretend we were
+ not using a base register. */
+ if (breg == op[0])
+ {
+ load_delay_nop ();
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ op[0], AT, breg);
+ breg = 0;
+ tempreg = op[0];
+ }
+ add_got_offset_hilo (tempreg, &offset_expr, AT);
+ used_at = 1;
+ }
}
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "slt", "d,v,t", dreg, sreg, AT);
- break;
+ else if (!mips_big_got && HAVE_NEWABI)
+ {
+ int add_breg_early = 0;
+
+ /* If this is a reference to an external, and there is no
+ constant, or local symbol (*), with or without a
+ constant, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP)
+ or for lca or if tempreg is PIC_CALL_REG
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
+
+ If we have a small constant, and this is a reference to
+ an external symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP)
+ addiu $tempreg,$tempreg,<constant>
- case M_SLTU_I:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
- && imm_expr.X_add_number < 0x8000)
- {
- macro_build (&imm_expr, "sltiu", "t,r,j", dreg, sreg,
- BFD_RELOC_LO16);
- break;
- }
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "sltu", "d,v,t", dreg, sreg, AT);
- break;
+ If we have a large constant, and this is a reference to
+ an external symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP)
+ lui $at,<hiconstant>
+ addiu $at,$at,<loconstant>
+ addu $tempreg,$tempreg,$at
- case M_SNE:
- if (sreg == 0)
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, treg);
- else if (treg == 0)
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, sreg);
- else
- {
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, treg);
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, dreg);
- }
- break;
+ (*) Other assemblers seem to prefer GOT_PAGE/GOT_OFST for
+ local symbols, even though it introduces an additional
+ instruction. */
- case M_SNE_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- {
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, sreg);
- break;
- }
- if (sreg == 0)
- {
- as_warn (_("Instruction %s: result is always true"),
- ip->insn_mo->name);
- macro_build (&expr1, HAVE_32BIT_GPRS ? "addiu" : "daddiu", "t,r,j",
- dreg, 0, BFD_RELOC_LO16);
- break;
- }
- if (CPU_HAS_SEQ (mips_opts.arch)
- && -512 <= imm_expr.X_add_number
- && imm_expr.X_add_number < 512)
- {
- macro_build (NULL, "snei", "t,r,+Q", dreg, sreg,
- (int) imm_expr.X_add_number);
- break;
- }
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= 0
- && imm_expr.X_add_number < 0x10000)
- {
- macro_build (&imm_expr, "xori", "t,r,i", dreg, sreg, BFD_RELOC_LO16);
- }
- else if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x8000
- && imm_expr.X_add_number < 0)
- {
- imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu",
- "t,r,j", dreg, sreg, BFD_RELOC_LO16);
- }
- else if (CPU_HAS_SEQ (mips_opts.arch))
- {
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "sne", "d,v,t", dreg, sreg, AT);
- break;
- }
- else
- {
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, AT);
- used_at = 1;
- }
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, dreg);
- break;
+ if (offset_expr.X_add_number)
+ {
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
- case M_SUB_I:
- s = "addi";
- s2 = "sub";
- goto do_subi;
- case M_SUBU_I:
- s = "addiu";
- s2 = "subu";
- goto do_subi;
- case M_DSUB_I:
- dbl = 1;
- s = "daddi";
- s2 = "dsub";
- if (!mips_opts.micromips)
- goto do_subi;
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x200
- && imm_expr.X_add_number <= 0x200)
- {
- macro_build (NULL, s, "t,r,.", dreg, sreg, -imm_expr.X_add_number);
- break;
- }
- goto do_subi_i;
- case M_DSUBU_I:
- dbl = 1;
- s = "daddiu";
- s2 = "dsubu";
- do_subi:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x8000
- && imm_expr.X_add_number <= 0x8000)
- {
- imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, s, "t,r,j", dreg, sreg, BFD_RELOC_LO16);
- break;
- }
- do_subi_i:
- used_at = 1;
- load_register (AT, &imm_expr, dbl);
- macro_build (NULL, s2, "d,v,t", dreg, sreg, AT);
- break;
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
- case M_TEQ_I:
- s = "teq";
- goto trap;
- case M_TGE_I:
- s = "tge";
- goto trap;
- case M_TGEU_I:
- s = "tgeu";
- goto trap;
- case M_TLT_I:
- s = "tlt";
- goto trap;
- case M_TLTU_I:
- s = "tltu";
- goto trap;
- case M_TNE_I:
- s = "tne";
- trap:
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s, "s,t", sreg, AT);
- break;
+ if (expr1.X_add_number >= -0x8000
+ && expr1.X_add_number < 0x8000)
+ {
+ macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, tempreg, BFD_RELOC_LO16);
+ }
+ else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
+ {
+ unsigned int dreg;
- case M_TRUNCWS:
- case M_TRUNCWD:
- gas_assert (!mips_opts.micromips);
- gas_assert (mips_opts.isa == ISA_MIPS1);
- used_at = 1;
- sreg = (ip->insn_opcode >> 11) & 0x1f; /* floating reg */
- dreg = (ip->insn_opcode >> 06) & 0x1f; /* floating reg */
+ /* If we are going to add in a base register, and the
+ target register and the base register are the same,
+ then we are using AT as a temporary register. Since
+ we want to load the constant into AT, we add our
+ current AT (from the global offset table) and the
+ register into the register now, and pretend we were
+ not using a base register. */
+ if (breg != op[0])
+ dreg = tempreg;
+ else
+ {
+ gas_assert (tempreg == AT);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ op[0], AT, breg);
+ dreg = op[0];
+ add_breg_early = 1;
+ }
- /*
- * Is the double cfc1 instruction a bug in the mips assembler;
- * or is there a reason for it?
- */
- start_noreorder ();
- macro_build (NULL, "cfc1", "t,G", treg, RA);
- macro_build (NULL, "cfc1", "t,G", treg, RA);
- macro_build (NULL, "nop", "");
- expr1.X_add_number = 3;
- macro_build (&expr1, "ori", "t,r,i", AT, treg, BFD_RELOC_LO16);
- expr1.X_add_number = 2;
- macro_build (&expr1, "xori", "t,r,i", AT, AT, BFD_RELOC_LO16);
- macro_build (NULL, "ctc1", "t,G", AT, RA);
- macro_build (NULL, "nop", "");
- macro_build (NULL, mask == M_TRUNCWD ? "cvt.w.d" : "cvt.w.s", "D,S",
- dreg, sreg);
- macro_build (NULL, "ctc1", "t,G", treg, RA);
- macro_build (NULL, "nop", "");
- end_noreorder ();
- break;
+ load_register (AT, &expr1, HAVE_64BIT_ADDRESSES);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ dreg, dreg, AT);
- case M_ULH_AB:
- s = "lb";
- s2 = "lbu";
- off = 1;
- goto uld_st;
- case M_ULHU_AB:
- s = "lbu";
- s2 = "lbu";
- off = 1;
- goto uld_st;
- case M_ULW_AB:
- s = "lwl";
- s2 = "lwr";
- offbits = (mips_opts.micromips ? 12 : 16);
- off = 3;
- goto uld_st;
- case M_ULD_AB:
- s = "ldl";
- s2 = "ldr";
- offbits = (mips_opts.micromips ? 12 : 16);
- off = 7;
- goto uld_st;
- case M_USH_AB:
- s = "sb";
- s2 = "sb";
- off = 1;
- ust = 1;
- goto uld_st;
- case M_USW_AB:
- s = "swl";
- s2 = "swr";
- offbits = (mips_opts.micromips ? 12 : 16);
- off = 3;
- ust = 1;
- goto uld_st;
- case M_USD_AB:
- s = "sdl";
- s2 = "sdr";
- offbits = (mips_opts.micromips ? 12 : 16);
- off = 7;
- ust = 1;
+ used_at = 1;
+ }
+ else
+ as_bad (_("PIC code offset overflow (max 32 signed bits)"));
- uld_st:
- large_offset = !small_offset_p (off, align, offbits);
- ep = &offset_expr;
- expr1.X_add_number = 0;
- if (large_offset)
- {
- used_at = 1;
- tempreg = AT;
- if (small_offset_p (0, align, 16))
- macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", tempreg, breg, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2]);
+ relax_switch ();
+ offset_expr.X_add_number = expr1.X_add_number;
+
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
+ if (add_breg_early)
+ {
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ op[0], tempreg, breg);
+ breg = 0;
+ tempreg = op[0];
+ }
+ relax_end ();
+ }
+ else if (breg == 0 && (call || tempreg == PIC_CALL_REG))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_CALL16, mips_gp_register);
+ relax_switch ();
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
+ relax_end ();
+ }
else
{
- load_address (tempreg, ep, &used_at);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- tempreg, tempreg, breg);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
}
- offset_reloc[0] = BFD_RELOC_LO16;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
- breg = tempreg;
- tempreg = treg;
- ep = &expr1;
}
- else if (!ust && treg == breg)
+ else if (mips_big_got && !HAVE_NEWABI)
{
- used_at = 1;
- tempreg = AT;
- }
- else
- tempreg = treg;
+ int gpdelay;
+ int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16;
+ int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16;
+ int local_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
- if (off == 1)
- goto ulh_sh;
+ /* This is the large GOT case. If this is a reference to an
+ external symbol, and there is no constant, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ or for lca or if tempreg is PIC_CALL_REG
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_CALL_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_CALL_LO16)
+ For a local symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- if (!target_big_endian)
- ep->X_add_number += off;
- if (offbits == 12)
- macro_build (NULL, s, "t,~(b)",
- tempreg, (unsigned long) ep->X_add_number, breg);
- else
- macro_build (ep, s, "t,o(b)", tempreg, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
+ If we have a small constant, and this is a reference to
+ an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ nop
+ addiu $tempreg,$tempreg,<constant>
+ For a local symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<constant> (BFD_RELOC_LO16)
- if (!target_big_endian)
- ep->X_add_number -= off;
- else
- ep->X_add_number += off;
- if (offbits == 12)
- macro_build (NULL, s2, "t,~(b)",
- tempreg, (unsigned long) ep->X_add_number, breg);
- else
- macro_build (ep, s2, "t,o(b)", tempreg, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
+ If we have a large constant, and this is a reference to
+ an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ lui $at,<hiconstant>
+ addiu $at,$at,<loconstant>
+ addu $tempreg,$tempreg,$at
+ For a local symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ lui $at,<hiconstant>
+ addiu $at,$at,<loconstant> (BFD_RELOC_LO16)
+ addu $tempreg,$tempreg,$at
+ */
- /* If necessary, move the result in tempreg to the final destination. */
- if (!ust && treg != tempreg)
- {
- /* Protect second load's delay slot. */
- load_delay_nop ();
- move_register (treg, tempreg);
- }
- break;
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ relax_start (offset_expr.X_add_symbol);
+ gpdelay = reg_needs_delay (mips_gp_register);
+ if (expr1.X_add_number == 0 && breg == 0
+ && (call || tempreg == PIC_CALL_REG))
+ {
+ lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16;
+ lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16;
+ }
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ tempreg, lw_reloc_type, tempreg);
+ if (expr1.X_add_number == 0)
+ {
+ if (breg != 0)
+ {
+ /* We're going to put in an addu instruction using
+ tempreg, so we may as well insert the nop right
+ now. */
+ load_delay_nop ();
+ }
+ }
+ else if (expr1.X_add_number >= -0x8000
+ && expr1.X_add_number < 0x8000)
+ {
+ load_delay_nop ();
+ macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, tempreg, BFD_RELOC_LO16);
+ }
+ else
+ {
+ unsigned int dreg;
- ulh_sh:
- used_at = 1;
- if (target_big_endian == ust)
- ep->X_add_number += off;
- tempreg = ust || large_offset ? treg : AT;
- macro_build (ep, s, "t,o(b)", tempreg, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
+ /* If we are going to add in a base register, and the
+ target register and the base register are the same,
+ then we are using AT as a temporary register. Since
+ we want to load the constant into AT, we add our
+ current AT (from the global offset table) and the
+ register into the register now, and pretend we were
+ not using a base register. */
+ if (breg != op[0])
+ dreg = tempreg;
+ else
+ {
+ gas_assert (tempreg == AT);
+ load_delay_nop ();
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ op[0], AT, breg);
+ dreg = op[0];
+ }
- /* For halfword transfers we need a temporary register to shuffle
- bytes. Unfortunately for M_USH_A we have none available before
- the next store as AT holds the base address. We deal with this
- case by clobbering TREG and then restoring it as with ULH. */
- tempreg = ust == large_offset ? treg : AT;
- if (ust)
- macro_build (NULL, "srl", SHFT_FMT, tempreg, treg, 8);
+ load_register (AT, &expr1, HAVE_64BIT_ADDRESSES);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dreg, dreg, AT);
- if (target_big_endian == ust)
- ep->X_add_number -= off;
- else
- ep->X_add_number += off;
- macro_build (ep, s2, "t,o(b)", tempreg, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
+ used_at = 1;
+ }
+ offset_expr.X_add_number = SEXT_16BIT (expr1.X_add_number);
+ relax_switch ();
- /* For M_USH_A re-retrieve the LSB. */
- if (ust && large_offset)
- {
- if (target_big_endian)
- ep->X_add_number += off;
+ if (gpdelay)
+ {
+ /* This is needed because this instruction uses $gp, but
+ the first instruction on the main stream does not. */
+ macro_build (NULL, "nop", "");
+ }
+
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ local_reloc_type, mips_gp_register);
+ if (expr1.X_add_number >= -0x8000
+ && expr1.X_add_number < 0x8000)
+ {
+ load_delay_nop ();
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, tempreg, BFD_RELOC_LO16);
+ /* FIXME: If add_number is 0, and there was no base
+ register, the external symbol case ended with a load,
+ so if the symbol turns out to not be external, and
+ the next instruction uses tempreg, an unnecessary nop
+ will be inserted. */
+ }
else
- ep->X_add_number -= off;
- macro_build (&expr1, "lbu", "t,o(b)", AT, -1,
- offset_reloc[0], offset_reloc[1], offset_reloc[2], AT);
+ {
+ if (breg == op[0])
+ {
+ /* We must add in the base register now, as in the
+ external symbol case. */
+ gas_assert (tempreg == AT);
+ load_delay_nop ();
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ op[0], AT, breg);
+ tempreg = op[0];
+ /* We set breg to 0 because we have arranged to add
+ it in in both cases. */
+ breg = 0;
+ }
+
+ macro_build_lui (&expr1, AT);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ AT, AT, BFD_RELOC_LO16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, AT);
+ used_at = 1;
+ }
+ relax_end ();
}
- /* For ULH and M_USH_A OR the LSB in. */
- if (!ust || large_offset)
+ else if (mips_big_got && HAVE_NEWABI)
{
- tempreg = !large_offset ? AT : treg;
- macro_build (NULL, "sll", SHFT_FMT, tempreg, tempreg, 8);
- macro_build (NULL, "or", "d,v,t", treg, treg, AT);
- }
- break;
+ int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16;
+ int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16;
+ int add_breg_early = 0;
- default:
- /* FIXME: Check if this is one of the itbl macros, since they
- are added dynamically. */
- as_bad (_("Macro %s not implemented yet"), ip->insn_mo->name);
- break;
- }
- if (!mips_opts.at && used_at)
- as_bad (_("Macro used $at after \".set noat\""));
-}
+ /* This is the large GOT case. If this is a reference to an
+ external symbol, and there is no constant, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ add $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ or for lca or if tempreg is PIC_CALL_REG
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_CALL_HI16)
+ add $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_CALL_LO16)
-/* Implement macros in mips16 mode. */
+ If we have a small constant, and this is a reference to
+ an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ add $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ addi $tempreg,$tempreg,<constant>
-static void
-mips16_macro (struct mips_cl_insn *ip)
-{
- int mask;
- int xreg, yreg, zreg, tmp;
- expressionS expr1;
- int dbl;
- const char *s, *s2, *s3;
+ If we have a large constant, and this is a reference to
+ an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ lui $at,<hiconstant>
+ addi $at,$at,<loconstant>
+ add $tempreg,$tempreg,$at
- mask = ip->insn_mo->mask;
+ If we have NewABI, and we know it's a local symbol, we want
+ lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
+ addiu $reg,$reg,<sym> (BFD_RELOC_MIPS_GOT_OFST)
+ otherwise we have to resort to GOT_HI16/GOT_LO16. */
+
+ relax_start (offset_expr.X_add_symbol);
+
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+
+ if (expr1.X_add_number == 0 && breg == 0
+ && (call || tempreg == PIC_CALL_REG))
+ {
+ lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16;
+ lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16;
+ }
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ tempreg, lw_reloc_type, tempreg);
- xreg = MIPS16_EXTRACT_OPERAND (RX, *ip);
- yreg = MIPS16_EXTRACT_OPERAND (RY, *ip);
- zreg = MIPS16_EXTRACT_OPERAND (RZ, *ip);
+ if (expr1.X_add_number == 0)
+ ;
+ else if (expr1.X_add_number >= -0x8000
+ && expr1.X_add_number < 0x8000)
+ {
+ macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, tempreg, BFD_RELOC_LO16);
+ }
+ else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
+ {
+ unsigned int dreg;
- expr1.X_op = O_constant;
- expr1.X_op_symbol = NULL;
- expr1.X_add_symbol = NULL;
- expr1.X_add_number = 1;
+ /* If we are going to add in a base register, and the
+ target register and the base register are the same,
+ then we are using AT as a temporary register. Since
+ we want to load the constant into AT, we add our
+ current AT (from the global offset table) and the
+ register into the register now, and pretend we were
+ not using a base register. */
+ if (breg != op[0])
+ dreg = tempreg;
+ else
+ {
+ gas_assert (tempreg == AT);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ op[0], AT, breg);
+ dreg = op[0];
+ add_breg_early = 1;
+ }
- dbl = 0;
+ load_register (AT, &expr1, HAVE_64BIT_ADDRESSES);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dreg, dreg, AT);
- switch (mask)
- {
- default:
- abort ();
+ used_at = 1;
+ }
+ else
+ as_bad (_("PIC code offset overflow (max 32 signed bits)"));
- case M_DDIV_3:
- dbl = 1;
- case M_DIV_3:
- s = "mflo";
- goto do_div3;
- case M_DREM_3:
- dbl = 1;
- case M_REM_3:
- s = "mfhi";
- do_div3:
- start_noreorder ();
- macro_build (NULL, dbl ? "ddiv" : "div", "0,x,y", xreg, yreg);
- expr1.X_add_number = 2;
- macro_build (&expr1, "bnez", "x,p", yreg);
- macro_build (NULL, "break", "6", 7);
+ relax_switch ();
+ offset_expr.X_add_number = expr1.X_add_number;
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg,
+ tempreg, BFD_RELOC_MIPS_GOT_OFST);
+ if (add_breg_early)
+ {
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ op[0], tempreg, breg);
+ breg = 0;
+ tempreg = op[0];
+ }
+ relax_end ();
+ }
+ else
+ abort ();
- /* FIXME: The normal code checks for of -1 / -0x80000000 here,
- since that causes an overflow. We should do that as well,
- but I don't see how to do the comparisons without a temporary
- register. */
- end_noreorder ();
- macro_build (NULL, s, "x", zreg);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", op[0], tempreg, breg);
break;
- case M_DIVU_3:
- s = "divu";
- s2 = "mflo";
- goto do_divu3;
- case M_REMU_3:
- s = "divu";
- s2 = "mfhi";
- goto do_divu3;
- case M_DDIVU_3:
- s = "ddivu";
- s2 = "mflo";
- goto do_divu3;
- case M_DREMU_3:
- s = "ddivu";
- s2 = "mfhi";
- do_divu3:
- start_noreorder ();
- macro_build (NULL, s, "0,x,y", xreg, yreg);
- expr1.X_add_number = 2;
- macro_build (&expr1, "bnez", "x,p", yreg);
- macro_build (NULL, "break", "6", 7);
- end_noreorder ();
- macro_build (NULL, s2, "x", zreg);
+ case M_MSGSND:
+ gas_assert (!mips_opts.micromips);
+ macro_build (NULL, "c2", "C", (op[0] << 16) | 0x01);
break;
- case M_DMUL:
- dbl = 1;
- case M_MUL:
- macro_build (NULL, dbl ? "dmultu" : "multu", "x,y", xreg, yreg);
- macro_build (NULL, "mflo", "x", zreg);
+ case M_MSGLD:
+ gas_assert (!mips_opts.micromips);
+ macro_build (NULL, "c2", "C", 0x02);
break;
- case M_DSUBU_I:
- dbl = 1;
- goto do_subu;
- case M_SUBU_I:
- do_subu:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "y,x,4", yreg, xreg);
+ case M_MSGLD_T:
+ gas_assert (!mips_opts.micromips);
+ macro_build (NULL, "c2", "C", (op[0] << 16) | 0x02);
break;
- case M_SUBU_I_2:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, "addiu", "x,k", xreg);
+ case M_MSGWAIT:
+ gas_assert (!mips_opts.micromips);
+ macro_build (NULL, "c2", "C", 3);
break;
- case M_DSUBU_I_2:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, "daddiu", "y,j", yreg);
+ case M_MSGWAIT_T:
+ gas_assert (!mips_opts.micromips);
+ macro_build (NULL, "c2", "C", (op[0] << 16) | 0x03);
break;
- case M_BEQ:
- s = "cmp";
- s2 = "bteqz";
- goto do_branch;
- case M_BNE:
- s = "cmp";
- s2 = "btnez";
- goto do_branch;
- case M_BLT:
- s = "slt";
- s2 = "btnez";
- goto do_branch;
- case M_BLTU:
- s = "sltu";
- s2 = "btnez";
- goto do_branch;
- case M_BLE:
- s = "slt";
- s2 = "bteqz";
- goto do_reverse_branch;
- case M_BLEU:
- s = "sltu";
- s2 = "bteqz";
- goto do_reverse_branch;
- case M_BGE:
- s = "slt";
- s2 = "bteqz";
- goto do_branch;
- case M_BGEU:
- s = "sltu";
- s2 = "bteqz";
- goto do_branch;
- case M_BGT:
- s = "slt";
- s2 = "btnez";
- goto do_reverse_branch;
- case M_BGTU:
- s = "sltu";
- s2 = "btnez";
-
- do_reverse_branch:
- tmp = xreg;
- xreg = yreg;
- yreg = tmp;
-
- do_branch:
- macro_build (NULL, s, "x,y", xreg, yreg);
- macro_build (&offset_expr, s2, "p");
+ case M_J_A:
+ /* The j instruction may not be used in PIC code, since it
+ requires an absolute address. We convert it to a b
+ instruction. */
+ if (mips_pic == NO_PIC)
+ macro_build (&offset_expr, "j", "a");
+ else
+ macro_build (&offset_expr, "b", "p");
break;
- case M_BEQ_I:
- s = "cmpi";
- s2 = "bteqz";
- s3 = "x,U";
- goto do_branch_i;
- case M_BNE_I:
- s = "cmpi";
- s2 = "btnez";
- s3 = "x,U";
- goto do_branch_i;
- case M_BLT_I:
- s = "slti";
- s2 = "btnez";
- s3 = "x,8";
- goto do_branch_i;
- case M_BLTU_I:
- s = "sltiu";
- s2 = "btnez";
- s3 = "x,8";
- goto do_branch_i;
- case M_BLE_I:
- s = "slti";
- s2 = "btnez";
- s3 = "x,8";
- goto do_addone_branch_i;
- case M_BLEU_I:
- s = "sltiu";
- s2 = "btnez";
- s3 = "x,8";
- goto do_addone_branch_i;
- case M_BGE_I:
- s = "slti";
- s2 = "bteqz";
- s3 = "x,8";
- goto do_branch_i;
- case M_BGEU_I:
- s = "sltiu";
- s2 = "bteqz";
- s3 = "x,8";
- goto do_branch_i;
- case M_BGT_I:
- s = "slti";
- s2 = "bteqz";
- s3 = "x,8";
- goto do_addone_branch_i;
- case M_BGTU_I:
- s = "sltiu";
- s2 = "bteqz";
- s3 = "x,8";
-
- do_addone_branch_i:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
- ++imm_expr.X_add_number;
-
- do_branch_i:
- macro_build (&imm_expr, s, s3, xreg);
- macro_build (&offset_expr, s2, "p");
- break;
+ /* The jal instructions must be handled as macros because when
+ generating PIC code they expand to multi-instruction
+ sequences. Normally they are simple instructions. */
+ case M_JALS_1:
+ op[1] = op[0];
+ op[0] = RA;
+ /* Fall through. */
+ case M_JALS_2:
+ gas_assert (mips_opts.micromips);
+ if (mips_opts.insn32)
+ {
+ as_bad (_("opcode not supported in the `insn32' mode `%s'"), str);
+ break;
+ }
+ jals = 1;
+ goto jal;
+ case M_JAL_1:
+ op[1] = op[0];
+ op[0] = RA;
+ /* Fall through. */
+ case M_JAL_2:
+ jal:
+ if (mips_pic == NO_PIC)
+ {
+ s = jals ? "jalrs" : "jalr";
+ if (mips_opts.micromips
+ && !mips_opts.insn32
+ && op[0] == RA
+ && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, s, "mj", op[1]);
+ else
+ macro_build (NULL, s, JALR_FMT, op[0], op[1]);
+ }
+ else
+ {
+ int cprestore = (mips_pic == SVR4_PIC && !HAVE_NEWABI
+ && mips_cprestore_offset >= 0);
- case M_ABS:
- expr1.X_add_number = 0;
- macro_build (&expr1, "slti", "x,8", yreg);
- if (xreg != yreg)
- move_register (xreg, yreg);
- expr1.X_add_number = 2;
- macro_build (&expr1, "bteqz", "p");
- macro_build (NULL, "neg", "x,w", xreg, xreg);
- }
-}
+ if (op[1] != PIC_CALL_REG)
+ as_warn (_("MIPS PIC call to register other than $25"));
-/* For consistency checking, verify that all bits are specified either
- by the match/mask part of the instruction definition, or by the
- operand list. */
-static int
-validate_mips_insn (const struct mips_opcode *opc)
-{
- const char *p = opc->args;
- char c;
- unsigned long used_bits = opc->mask;
+ s = ((mips_opts.micromips
+ && !mips_opts.insn32
+ && (!mips_opts.noreorder || cprestore))
+ ? "jalrs" : "jalr");
+ if (mips_opts.micromips
+ && !mips_opts.insn32
+ && op[0] == RA
+ && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, s, "mj", op[1]);
+ else
+ macro_build (NULL, s, JALR_FMT, op[0], op[1]);
+ if (mips_pic == SVR4_PIC && !HAVE_NEWABI)
+ {
+ if (mips_cprestore_offset < 0)
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
+ else
+ {
+ if (!mips_frame_reg_valid)
+ {
+ as_warn (_("no .frame pseudo-op used in PIC code"));
+ /* Quiet this warning. */
+ mips_frame_reg_valid = 1;
+ }
+ if (!mips_cprestore_valid)
+ {
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
+ /* Quiet this warning. */
+ mips_cprestore_valid = 1;
+ }
+ if (mips_opts.noreorder)
+ macro_build (NULL, "nop", "");
+ expr1.X_add_number = mips_cprestore_offset;
+ macro_build_ldst_constoffset (&expr1, ADDRESS_LOAD_INSN,
+ mips_gp_register,
+ mips_frame_reg,
+ HAVE_64BIT_ADDRESSES);
+ }
+ }
+ }
- if ((used_bits & opc->match) != opc->match)
- {
- as_bad (_("internal: bad mips opcode (mask error): %s %s"),
- opc->name, opc->args);
- return 0;
- }
-#define USE_BITS(mask,shift) (used_bits |= ((mask) << (shift)))
- while (*p)
- switch (c = *p++)
- {
- case ',': break;
- case '(': break;
- case ')': break;
- case '+':
- switch (c = *p++)
- {
- case '1': USE_BITS (OP_MASK_UDI1, OP_SH_UDI1); break;
- case '2': USE_BITS (OP_MASK_UDI2, OP_SH_UDI2); break;
- case '3': USE_BITS (OP_MASK_UDI3, OP_SH_UDI3); break;
- case '4': USE_BITS (OP_MASK_UDI4, OP_SH_UDI4); break;
- case 'A': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
- case 'B': USE_BITS (OP_MASK_INSMSB, OP_SH_INSMSB); break;
- case 'C': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
- case 'E': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
- case 'F': USE_BITS (OP_MASK_INSMSB, OP_SH_INSMSB); break;
- case 'G': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
- case 'H': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
- case 'I': break;
- case 'J': USE_BITS (OP_MASK_CODE10, OP_SH_CODE10); break;
- case 't': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
- case 'x': USE_BITS (OP_MASK_BBITIND, OP_SH_BBITIND); break;
- case 'X': USE_BITS (OP_MASK_BBITIND, OP_SH_BBITIND); break;
- case 'p': USE_BITS (OP_MASK_CINSPOS, OP_SH_CINSPOS); break;
- case 'P': USE_BITS (OP_MASK_CINSPOS, OP_SH_CINSPOS); break;
- case 'Q': USE_BITS (OP_MASK_SEQI, OP_SH_SEQI); break;
- case 's': USE_BITS (OP_MASK_CINSLM1, OP_SH_CINSLM1); break;
- case 'S': USE_BITS (OP_MASK_CINSLM1, OP_SH_CINSLM1); break;
- case 'z': USE_BITS (OP_MASK_RZ, OP_SH_RZ); break;
- case 'Z': USE_BITS (OP_MASK_FZ, OP_SH_FZ); break;
- case 'a': USE_BITS (OP_MASK_OFFSET_A, OP_SH_OFFSET_A); break;
- case 'b': USE_BITS (OP_MASK_OFFSET_B, OP_SH_OFFSET_B); break;
- case 'c': USE_BITS (OP_MASK_OFFSET_C, OP_SH_OFFSET_C); break;
- case 'i': USE_BITS (OP_MASK_TARGET, OP_SH_TARGET); break;
- case 'j': USE_BITS (OP_MASK_EVAOFFSET, OP_SH_EVAOFFSET); break;
-
- default:
- as_bad (_("internal: bad mips opcode (unknown extension operand type `+%c'): %s %s"),
- c, opc->name, opc->args);
- return 0;
- }
- break;
- case '<': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
- case '>': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
- case 'A': break;
- case 'B': USE_BITS (OP_MASK_CODE20, OP_SH_CODE20); break;
- case 'C': USE_BITS (OP_MASK_COPZ, OP_SH_COPZ); break;
- case 'D': USE_BITS (OP_MASK_FD, OP_SH_FD); break;
- case 'E': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
- case 'F': break;
- case 'G': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
- case 'H': USE_BITS (OP_MASK_SEL, OP_SH_SEL); break;
- case 'I': break;
- case 'J': USE_BITS (OP_MASK_CODE19, OP_SH_CODE19); break;
- case 'K': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
- case 'L': break;
- case 'M': USE_BITS (OP_MASK_CCC, OP_SH_CCC); break;
- case 'N': USE_BITS (OP_MASK_BCC, OP_SH_BCC); break;
- case 'O': USE_BITS (OP_MASK_ALN, OP_SH_ALN); break;
- case 'Q': USE_BITS (OP_MASK_VSEL, OP_SH_VSEL);
- USE_BITS (OP_MASK_FT, OP_SH_FT); break;
- case 'R': USE_BITS (OP_MASK_FR, OP_SH_FR); break;
- case 'S': USE_BITS (OP_MASK_FS, OP_SH_FS); break;
- case 'T': USE_BITS (OP_MASK_FT, OP_SH_FT); break;
- case 'V': USE_BITS (OP_MASK_FS, OP_SH_FS); break;
- case 'W': USE_BITS (OP_MASK_FT, OP_SH_FT); break;
- case 'X': USE_BITS (OP_MASK_FD, OP_SH_FD); break;
- case 'Y': USE_BITS (OP_MASK_FS, OP_SH_FS); break;
- case 'Z': USE_BITS (OP_MASK_FT, OP_SH_FT); break;
- case 'a': USE_BITS (OP_MASK_TARGET, OP_SH_TARGET); break;
- case 'b': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
- case 'c': USE_BITS (OP_MASK_CODE, OP_SH_CODE); break;
- case 'd': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
- case 'f': break;
- case 'h': USE_BITS (OP_MASK_PREFX, OP_SH_PREFX); break;
- case 'i': USE_BITS (OP_MASK_IMMEDIATE, OP_SH_IMMEDIATE); break;
- case 'j': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
- case 'k': USE_BITS (OP_MASK_CACHE, OP_SH_CACHE); break;
- case 'l': break;
- case 'o': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
- case 'p': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
- case 'q': USE_BITS (OP_MASK_CODE2, OP_SH_CODE2); break;
- case 'r': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
- case 's': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
- case 't': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
- case 'u': USE_BITS (OP_MASK_IMMEDIATE, OP_SH_IMMEDIATE); break;
- case 'v': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
- case 'w': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
- case 'x': break;
- case 'z': break;
- case 'P': USE_BITS (OP_MASK_PERFREG, OP_SH_PERFREG); break;
- case 'U': USE_BITS (OP_MASK_RD, OP_SH_RD);
- USE_BITS (OP_MASK_RT, OP_SH_RT); break;
- case 'e': USE_BITS (OP_MASK_VECBYTE, OP_SH_VECBYTE); break;
- case '%': USE_BITS (OP_MASK_VECALIGN, OP_SH_VECALIGN); break;
- case '1': USE_BITS (OP_MASK_STYPE, OP_SH_STYPE); break;
- case '2': USE_BITS (OP_MASK_BP, OP_SH_BP); break;
- case '3': USE_BITS (OP_MASK_SA3, OP_SH_SA3); break;
- case '4': USE_BITS (OP_MASK_SA4, OP_SH_SA4); break;
- case '5': USE_BITS (OP_MASK_IMM8, OP_SH_IMM8); break;
- case '6': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
- case '7': USE_BITS (OP_MASK_DSPACC, OP_SH_DSPACC); break;
- case '8': USE_BITS (OP_MASK_WRDSP, OP_SH_WRDSP); break;
- case '9': USE_BITS (OP_MASK_DSPACC_S, OP_SH_DSPACC_S);break;
- case '0': USE_BITS (OP_MASK_DSPSFT, OP_SH_DSPSFT); break;
- case '\'': USE_BITS (OP_MASK_RDDSP, OP_SH_RDDSP); break;
- case ':': USE_BITS (OP_MASK_DSPSFT_7, OP_SH_DSPSFT_7);break;
- case '@': USE_BITS (OP_MASK_IMM10, OP_SH_IMM10); break;
- case '!': USE_BITS (OP_MASK_MT_U, OP_SH_MT_U); break;
- case '$': USE_BITS (OP_MASK_MT_H, OP_SH_MT_H); break;
- case '*': USE_BITS (OP_MASK_MTACC_T, OP_SH_MTACC_T); break;
- case '&': USE_BITS (OP_MASK_MTACC_D, OP_SH_MTACC_D); break;
- case '\\': USE_BITS (OP_MASK_3BITPOS, OP_SH_3BITPOS); break;
- case '~': USE_BITS (OP_MASK_OFFSET12, OP_SH_OFFSET12); break;
- case 'g': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
- default:
- as_bad (_("internal: bad mips opcode (unknown operand type `%c'): %s %s"),
- c, opc->name, opc->args);
- return 0;
- }
-#undef USE_BITS
- if (used_bits != 0xffffffff)
- {
- as_bad (_("internal: bad mips opcode (bits 0x%lx undefined): %s %s"),
- ~used_bits & 0xffffffff, opc->name, opc->args);
- return 0;
- }
- return 1;
-}
+ break;
-/* For consistency checking, verify that the length implied matches the
- major opcode and that all bits are specified either by the match/mask
- part of the instruction definition, or by the operand list. */
+ case M_JALS_A:
+ gas_assert (mips_opts.micromips);
+ if (mips_opts.insn32)
+ {
+ as_bad (_("opcode not supported in the `insn32' mode `%s'"), str);
+ break;
+ }
+ jals = 1;
+ /* Fall through. */
+ case M_JAL_A:
+ if (mips_pic == NO_PIC)
+ macro_build (&offset_expr, jals ? "jals" : "jal", "a");
+ else if (mips_pic == SVR4_PIC)
+ {
+ /* If this is a reference to an external symbol, and we are
+ using a small GOT, we want
+ lw $25,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
+ nop
+ jalr $ra,$25
+ nop
+ lw $gp,cprestore($sp)
+ The cprestore value is set using the .cprestore
+ pseudo-op. If we are using a big GOT, we want
+ lui $25,<sym> (BFD_RELOC_MIPS_CALL_HI16)
+ addu $25,$25,$gp
+ lw $25,<sym>($25) (BFD_RELOC_MIPS_CALL_LO16)
+ nop
+ jalr $ra,$25
+ nop
+ lw $gp,cprestore($sp)
+ If the symbol is not external, we want
+ lw $25,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $25,$25,<sym> (BFD_RELOC_LO16)
+ jalr $ra,$25
+ nop
+ lw $gp,cprestore($sp)
-static int
-validate_micromips_insn (const struct mips_opcode *opc)
-{
- unsigned long match = opc->match;
- unsigned long mask = opc->mask;
- const char *p = opc->args;
- unsigned long insn_bits;
- unsigned long used_bits;
- unsigned long major;
- unsigned int length;
- char e;
- char c;
+ For NewABI, we use the same CALL16 or CALL_HI16/CALL_LO16
+ sequences above, minus nops, unless the symbol is local,
+ which enables us to use GOT_PAGE/GOT_OFST (big got) or
+ GOT_DISP. */
+ if (HAVE_NEWABI)
+ {
+ if (!mips_big_got)
+ {
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ PIC_CALL_REG, BFD_RELOC_MIPS_CALL16,
+ mips_gp_register);
+ relax_switch ();
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ PIC_CALL_REG, BFD_RELOC_MIPS_GOT_DISP,
+ mips_gp_register);
+ relax_end ();
+ }
+ else
+ {
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG,
+ BFD_RELOC_MIPS_CALL_HI16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG,
+ PIC_CALL_REG, mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ PIC_CALL_REG, BFD_RELOC_MIPS_CALL_LO16,
+ PIC_CALL_REG);
+ relax_switch ();
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ PIC_CALL_REG, BFD_RELOC_MIPS_GOT_PAGE,
+ mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ PIC_CALL_REG, PIC_CALL_REG,
+ BFD_RELOC_MIPS_GOT_OFST);
+ relax_end ();
+ }
- if ((mask & match) != match)
- {
- as_bad (_("Internal error: bad microMIPS opcode (mask error): %s %s"),
- opc->name, opc->args);
- return 0;
- }
- length = micromips_insn_length (opc);
- if (length != 2 && length != 4)
- {
- as_bad (_("Internal error: bad microMIPS opcode (incorrect length: %u): "
- "%s %s"), length, opc->name, opc->args);
- return 0;
- }
- major = match >> (10 + 8 * (length - 2));
- if ((length == 2 && (major & 7) != 1 && (major & 6) != 2)
- || (length == 4 && (major & 7) != 0 && (major & 4) != 4))
- {
- as_bad (_("Internal error: bad microMIPS opcode "
- "(opcode/length mismatch): %s %s"), opc->name, opc->args);
- return 0;
- }
+ macro_build_jalr (&offset_expr, 0);
+ }
+ else
+ {
+ relax_start (offset_expr.X_add_symbol);
+ if (!mips_big_got)
+ {
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ PIC_CALL_REG, BFD_RELOC_MIPS_CALL16,
+ mips_gp_register);
+ load_delay_nop ();
+ relax_switch ();
+ }
+ else
+ {
+ int gpdelay;
- /* Shift piecewise to avoid an overflow where unsigned long is 32-bit. */
- insn_bits = 1 << 4 * length;
- insn_bits <<= 4 * length;
- insn_bits -= 1;
- used_bits = mask;
-#define USE_BITS(field) \
- (used_bits |= MICROMIPSOP_MASK_##field << MICROMIPSOP_SH_##field)
- while (*p)
- switch (c = *p++)
- {
- case ',': break;
- case '(': break;
- case ')': break;
- case '+':
- e = c;
- switch (c = *p++)
- {
- case 'A': USE_BITS (EXTLSB); break;
- case 'B': USE_BITS (INSMSB); break;
- case 'C': USE_BITS (EXTMSBD); break;
- case 'E': USE_BITS (EXTLSB); break;
- case 'F': USE_BITS (INSMSB); break;
- case 'G': USE_BITS (EXTMSBD); break;
- case 'H': USE_BITS (EXTMSBD); break;
- case 'i': USE_BITS (TARGET); break;
- case 'j': USE_BITS (EVAOFFSET); break;
- default:
- as_bad (_("Internal error: bad mips opcode "
- "(unknown extension operand type `%c%c'): %s %s"),
- e, c, opc->name, opc->args);
- return 0;
- }
- break;
- case 'm':
- e = c;
- switch (c = *p++)
- {
- case 'A': USE_BITS (IMMA); break;
- case 'B': USE_BITS (IMMB); break;
- case 'C': USE_BITS (IMMC); break;
- case 'D': USE_BITS (IMMD); break;
- case 'E': USE_BITS (IMME); break;
- case 'F': USE_BITS (IMMF); break;
- case 'G': USE_BITS (IMMG); break;
- case 'H': USE_BITS (IMMH); break;
- case 'I': USE_BITS (IMMI); break;
- case 'J': USE_BITS (IMMJ); break;
- case 'L': USE_BITS (IMML); break;
- case 'M': USE_BITS (IMMM); break;
- case 'N': USE_BITS (IMMN); break;
- case 'O': USE_BITS (IMMO); break;
- case 'P': USE_BITS (IMMP); break;
- case 'Q': USE_BITS (IMMQ); break;
- case 'U': USE_BITS (IMMU); break;
- case 'W': USE_BITS (IMMW); break;
- case 'X': USE_BITS (IMMX); break;
- case 'Y': USE_BITS (IMMY); break;
- case 'Z': break;
- case 'a': break;
- case 'b': USE_BITS (MB); break;
- case 'c': USE_BITS (MC); break;
- case 'd': USE_BITS (MD); break;
- case 'e': USE_BITS (ME); break;
- case 'f': USE_BITS (MF); break;
- case 'g': USE_BITS (MG); break;
- case 'h': USE_BITS (MH); break;
- case 'j': USE_BITS (MJ); break;
- case 'l': USE_BITS (ML); break;
- case 'm': USE_BITS (MM); break;
- case 'n': USE_BITS (MN); break;
- case 'p': USE_BITS (MP); break;
- case 'q': USE_BITS (MQ); break;
- case 'r': break;
- case 's': break;
- case 't': break;
- case 'x': break;
- case 'y': break;
- case 'z': break;
- default:
- as_bad (_("Internal error: bad mips opcode "
- "(unknown extension operand type `%c%c'): %s %s"),
- e, c, opc->name, opc->args);
- return 0;
- }
- break;
- case '.': USE_BITS (OFFSET10); break;
- case '1': USE_BITS (STYPE); break;
- case '2': USE_BITS (BP); break;
- case '3': USE_BITS (SA3); break;
- case '4': USE_BITS (SA4); break;
- case '5': USE_BITS (IMM8); break;
- case '6': USE_BITS (RS); break;
- case '7': USE_BITS (DSPACC); break;
- case '8': USE_BITS (WRDSP); break;
- case '0': USE_BITS (DSPSFT); break;
- case '<': USE_BITS (SHAMT); break;
- case '>': USE_BITS (SHAMT); break;
- case '@': USE_BITS (IMM10); break;
- case 'B': USE_BITS (CODE10); break;
- case 'C': USE_BITS (COPZ); break;
- case 'D': USE_BITS (FD); break;
- case 'E': USE_BITS (RT); break;
- case 'G': USE_BITS (RS); break;
- case 'H': USE_BITS (SEL); break;
- case 'K': USE_BITS (RS); break;
- case 'M': USE_BITS (CCC); break;
- case 'N': USE_BITS (BCC); break;
- case 'R': USE_BITS (FR); break;
- case 'S': USE_BITS (FS); break;
- case 'T': USE_BITS (FT); break;
- case 'V': USE_BITS (FS); break;
- case '\\': USE_BITS (3BITPOS); break;
- case '^': USE_BITS (RD); break;
- case 'a': USE_BITS (TARGET); break;
- case 'b': USE_BITS (RS); break;
- case 'c': USE_BITS (CODE); break;
- case 'd': USE_BITS (RD); break;
- case 'h': USE_BITS (PREFX); break;
- case 'i': USE_BITS (IMMEDIATE); break;
- case 'j': USE_BITS (DELTA); break;
- case 'k': USE_BITS (CACHE); break;
- case 'n': USE_BITS (RT); break;
- case 'o': USE_BITS (DELTA); break;
- case 'p': USE_BITS (DELTA); break;
- case 'q': USE_BITS (CODE2); break;
- case 'r': USE_BITS (RS); break;
- case 's': USE_BITS (RS); break;
- case 't': USE_BITS (RT); break;
- case 'u': USE_BITS (IMMEDIATE); break;
- case 'v': USE_BITS (RS); break;
- case 'w': USE_BITS (RT); break;
- case 'y': USE_BITS (RS3); break;
- case 'z': break;
- case '|': USE_BITS (TRAP); break;
- case '~': USE_BITS (OFFSET12); break;
- default:
- as_bad (_("Internal error: bad microMIPS opcode "
- "(unknown operand type `%c'): %s %s"),
- c, opc->name, opc->args);
- return 0;
- }
-#undef USE_BITS
- if (used_bits != insn_bits)
- {
- if (~used_bits & insn_bits)
- as_bad (_("Internal error: bad microMIPS opcode "
- "(bits 0x%lx undefined): %s %s"),
- ~used_bits & insn_bits, opc->name, opc->args);
- if (used_bits & ~insn_bits)
- as_bad (_("Internal error: bad microMIPS opcode "
- "(bits 0x%lx defined): %s %s"),
- used_bits & ~insn_bits, opc->name, opc->args);
- return 0;
- }
- return 1;
-}
+ gpdelay = reg_needs_delay (mips_gp_register);
+ macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG,
+ BFD_RELOC_MIPS_CALL_HI16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG,
+ PIC_CALL_REG, mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ PIC_CALL_REG, BFD_RELOC_MIPS_CALL_LO16,
+ PIC_CALL_REG);
+ load_delay_nop ();
+ relax_switch ();
+ if (gpdelay)
+ macro_build (NULL, "nop", "");
+ }
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ PIC_CALL_REG, BFD_RELOC_MIPS_GOT16,
+ mips_gp_register);
+ load_delay_nop ();
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ PIC_CALL_REG, PIC_CALL_REG, BFD_RELOC_LO16);
+ relax_end ();
+ macro_build_jalr (&offset_expr, mips_cprestore_offset >= 0);
-/* UDI immediates. */
-struct mips_immed {
- char type;
- unsigned int shift;
- unsigned long mask;
- const char * desc;
-};
+ if (mips_cprestore_offset < 0)
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
+ else
+ {
+ if (!mips_frame_reg_valid)
+ {
+ as_warn (_("no .frame pseudo-op used in PIC code"));
+ /* Quiet this warning. */
+ mips_frame_reg_valid = 1;
+ }
+ if (!mips_cprestore_valid)
+ {
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
+ /* Quiet this warning. */
+ mips_cprestore_valid = 1;
+ }
+ if (mips_opts.noreorder)
+ macro_build (NULL, "nop", "");
+ expr1.X_add_number = mips_cprestore_offset;
+ macro_build_ldst_constoffset (&expr1, ADDRESS_LOAD_INSN,
+ mips_gp_register,
+ mips_frame_reg,
+ HAVE_64BIT_ADDRESSES);
+ }
+ }
+ }
+ else if (mips_pic == VXWORKS_PIC)
+ as_bad (_("non-PIC jump used in PIC library"));
+ else
+ abort ();
-static const struct mips_immed mips_immed[] = {
- { '1', OP_SH_UDI1, OP_MASK_UDI1, 0},
- { '2', OP_SH_UDI2, OP_MASK_UDI2, 0},
- { '3', OP_SH_UDI3, OP_MASK_UDI3, 0},
- { '4', OP_SH_UDI4, OP_MASK_UDI4, 0},
- { 0,0,0,0 }
-};
+ break;
+
+ case M_LBUE_AB:
+ s = "lbue";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LHUE_AB:
+ s = "lhue";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LBE_AB:
+ s = "lbe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LHE_AB:
+ s = "lhe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LLE_AB:
+ s = "lle";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LWE_AB:
+ s = "lwe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LWLE_AB:
+ s = "lwle";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LWRE_AB:
+ s = "lwre";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SBE_AB:
+ s = "sbe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SCE_AB:
+ s = "sce";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SHE_AB:
+ s = "she";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SWE_AB:
+ s = "swe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SWLE_AB:
+ s = "swle";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SWRE_AB:
+ s = "swre";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_ACLR_AB:
+ s = "aclr";
+ fmt = "\\,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_ASET_AB:
+ s = "aset";
+ fmt = "\\,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_LB_AB:
+ s = "lb";
+ fmt = "t,o(b)";
+ goto ld;
+ case M_LBU_AB:
+ s = "lbu";
+ fmt = "t,o(b)";
+ goto ld;
+ case M_LH_AB:
+ s = "lh";
+ fmt = "t,o(b)";
+ goto ld;
+ case M_LHU_AB:
+ s = "lhu";
+ fmt = "t,o(b)";
+ goto ld;
+ case M_LW_AB:
+ s = "lw";
+ fmt = "t,o(b)";
+ goto ld;
+ case M_LWC0_AB:
+ gas_assert (!mips_opts.micromips);
+ s = "lwc0";
+ fmt = "E,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LWC1_AB:
+ s = "lwc1";
+ fmt = "T,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LWC2_AB:
+ s = "lwc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LWC3_AB:
+ gas_assert (!mips_opts.micromips);
+ s = "lwc3";
+ fmt = "E,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LWL_AB:
+ s = "lwl";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_LWR_AB:
+ s = "lwr";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_LDC1_AB:
+ s = "ldc1";
+ fmt = "T,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LDC2_AB:
+ s = "ldc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LQC2_AB:
+ s = "lqc2";
+ fmt = "+7,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LDC3_AB:
+ s = "ldc3";
+ fmt = "E,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_LDL_AB:
+ s = "ldl";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_LDR_AB:
+ s = "ldr";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_LL_AB:
+ s = "ll";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld;
+ case M_LLD_AB:
+ s = "lld";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld;
+ case M_LWU_AB:
+ s = "lwu";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld;
+ case M_LWP_AB:
+ gas_assert (mips_opts.micromips);
+ s = "lwp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ lp = 1;
+ goto ld;
+ case M_LDP_AB:
+ gas_assert (mips_opts.micromips);
+ s = "ldp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ lp = 1;
+ goto ld;
+ case M_LWM_AB:
+ gas_assert (mips_opts.micromips);
+ s = "lwm";
+ fmt = "n,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_LDM_AB:
+ gas_assert (mips_opts.micromips);
+ s = "ldm";
+ fmt = "n,~(b)";
+ offbits = 12;
+ goto ld_st;
-/* Check whether an odd floating-point register is allowed. */
-static int
-mips_oddfpreg_ok (const struct mips_opcode *insn, int argnum)
-{
- const char *s = insn->name;
+ ld:
+ /* We don't want to use $0 as tempreg. */
+ if (op[2] == op[0] + lp || op[0] + lp == ZERO)
+ goto ld_st;
+ else
+ tempreg = op[0] + lp;
+ goto ld_noat;
- if (insn->pinfo == INSN_MACRO)
- /* Let a macro pass, we'll catch it later when it is expanded. */
- return 1;
+ case M_SB_AB:
+ s = "sb";
+ fmt = "t,o(b)";
+ goto ld_st;
+ case M_SH_AB:
+ s = "sh";
+ fmt = "t,o(b)";
+ goto ld_st;
+ case M_SW_AB:
+ s = "sw";
+ fmt = "t,o(b)";
+ goto ld_st;
+ case M_SWC0_AB:
+ gas_assert (!mips_opts.micromips);
+ s = "swc0";
+ fmt = "E,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SWC1_AB:
+ s = "swc1";
+ fmt = "T,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SWC2_AB:
+ s = "swc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SWC3_AB:
+ gas_assert (!mips_opts.micromips);
+ s = "swc3";
+ fmt = "E,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SWL_AB:
+ s = "swl";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_SWR_AB:
+ s = "swr";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_SC_AB:
+ s = "sc";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_SCD_AB:
+ s = "scd";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_CACHE_AB:
+ s = "cache";
+ fmt = mips_opts.micromips ? "k,~(b)" : "k,o(b)";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_CACHEE_AB:
+ s = "cachee";
+ fmt = "k,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_PREF_AB:
+ s = "pref";
+ fmt = !mips_opts.micromips ? "k,o(b)" : "k,~(b)";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_PREFE_AB:
+ s = "prefe";
+ fmt = "k,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SDC1_AB:
+ s = "sdc1";
+ fmt = "T,o(b)";
+ coproc = 1;
+ /* Itbl support may require additional care here. */
+ goto ld_st;
+ case M_SDC2_AB:
+ s = "sdc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SQC2_AB:
+ s = "sqc2";
+ fmt = "+7,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SDC3_AB:
+ gas_assert (!mips_opts.micromips);
+ s = "sdc3";
+ fmt = "E,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SDL_AB:
+ s = "sdl";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_SDR_AB:
+ s = "sdr";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_SWP_AB:
+ gas_assert (mips_opts.micromips);
+ s = "swp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_SDP_AB:
+ gas_assert (mips_opts.micromips);
+ s = "sdp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_SWM_AB:
+ gas_assert (mips_opts.micromips);
+ s = "swm";
+ fmt = "n,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_SDM_AB:
+ gas_assert (mips_opts.micromips);
+ s = "sdm";
+ fmt = "n,~(b)";
+ offbits = 12;
- if (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa) || (mips_opts.arch == CPU_R5900))
- {
- /* Allow odd registers for single-precision ops. */
- switch (insn->pinfo & (FP_S | FP_D))
+ ld_st:
+ tempreg = AT;
+ ld_noat:
+ breg = op[2];
+ if (small_offset_p (0, align, 16))
{
- case FP_S:
- case 0:
- return 1; /* both single precision - ok */
- case FP_D:
- return 0; /* both double precision - fail */
- default:
+ /* The first case exists for M_LD_AB and M_SD_AB, which are
+ macros for o32 but which should act like normal instructions
+ otherwise. */
+ if (offbits == 16)
+ macro_build (&offset_expr, s, fmt, op[0], -1, offset_reloc[0],
+ offset_reloc[1], offset_reloc[2], breg);
+ else if (small_offset_p (0, align, offbits))
+ {
+ if (offbits == 0)
+ macro_build (NULL, s, fmt, op[0], breg);
+ else
+ macro_build (NULL, s, fmt, op[0],
+ (int) offset_expr.X_add_number, breg);
+ }
+ else
+ {
+ if (tempreg == AT)
+ used_at = 1;
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, breg, -1, offset_reloc[0],
+ offset_reloc[1], offset_reloc[2]);
+ if (offbits == 0)
+ macro_build (NULL, s, fmt, op[0], tempreg);
+ else
+ macro_build (NULL, s, fmt, op[0], 0, tempreg);
+ }
break;
}
- /* Cvt.w.x and cvt.x.w allow an odd register for a 'w' or 's' operand. */
- s = strchr (insn->name, '.');
- if (argnum == 2)
- s = s != NULL ? strchr (s + 1, '.') : NULL;
- return (s != NULL && (s[1] == 'w' || s[1] == 's'));
- }
-
- /* Single-precision coprocessor loads and moves are OK too. */
- if ((insn->pinfo & FP_S)
- && (insn->pinfo & (INSN_COPROC_MEMORY_DELAY | INSN_STORE_MEMORY
- | INSN_LOAD_COPROC_DELAY | INSN_COPROC_MOVE_DELAY)))
- return 1;
-
- return 0;
-}
-
-/* Check if EXPR is a constant between MIN (inclusive) and MAX (exclusive)
- taking bits from BIT up. */
-static int
-expr_const_in_range (expressionS *ep, offsetT min, offsetT max, int bit)
-{
- return (ep->X_op == O_constant
- && (ep->X_add_number & ((1 << bit) - 1)) == 0
- && ep->X_add_number >= min << bit
- && ep->X_add_number < max << bit);
-}
-
-/* This routine assembles an instruction into its binary format. As a
- side effect, it sets one of the global variables imm_reloc or
- offset_reloc to the type of relocation to do if one of the operands
- is an address expression. */
-
-static void
-mips_ip (char *str, struct mips_cl_insn *ip)
-{
- bfd_boolean wrong_delay_slot_insns = FALSE;
- bfd_boolean need_delay_slot_ok = TRUE;
- struct mips_opcode *firstinsn = NULL;
- const struct mips_opcode *past;
- struct hash_control *hash;
- char *s;
- const char *args;
- char c = 0;
- struct mips_opcode *insn;
- char *argsStart;
- unsigned int regno, regno2;
- unsigned int lastregno;
- unsigned int destregno = 0;
- unsigned int lastpos = 0;
- unsigned int limlo, limhi;
- int sizelo;
- char *s_reset;
- offsetT min_range, max_range;
- long opend;
- char *name;
- int argnum;
- unsigned int rtype;
- char *dot;
- long end;
+ if (tempreg == AT)
+ used_at = 1;
- insn_error = NULL;
+ if (offset_expr.X_op != O_constant
+ && offset_expr.X_op != O_symbol)
+ {
+ as_bad (_("expression too complex"));
+ offset_expr.X_op = O_constant;
+ }
- if (mips_opts.micromips)
- {
- hash = micromips_op_hash;
- past = µmips_opcodes[bfd_micromips_num_opcodes];
- }
- else
- {
- hash = op_hash;
- past = &mips_opcodes[NUMOPCODES];
- }
- forced_insn_length = 0;
- insn = NULL;
+ if (HAVE_32BIT_ADDRESSES
+ && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
+ {
+ char value [32];
- /* We first try to match an instruction up to a space or to the end. */
- for (end = 0; str[end] != '\0' && !ISSPACE (str[end]); end++)
- continue;
+ sprintf_vma (value, offset_expr.X_add_number);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
+ }
- /* Make a copy of the instruction so that we can fiddle with it. */
- name = alloca (end + 1);
- memcpy (name, str, end);
- name[end] = '\0';
+ /* A constant expression in PIC code can be handled just as it
+ is in non PIC code. */
+ if (offset_expr.X_op == O_constant)
+ {
+ expr1.X_add_number = offset_high_part (offset_expr.X_add_number,
+ offbits == 0 ? 16 : offbits);
+ offset_expr.X_add_number -= expr1.X_add_number;
- for (;;)
- {
- insn = (struct mips_opcode *) hash_find (hash, name);
+ load_register (tempreg, &expr1, HAVE_64BIT_ADDRESSES);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ if (offbits == 0)
+ {
+ if (offset_expr.X_add_number != 0)
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN,
+ "t,r,j", tempreg, tempreg, BFD_RELOC_LO16);
+ macro_build (NULL, s, fmt, op[0], tempreg);
+ }
+ else if (offbits == 16)
+ macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
+ else
+ macro_build (NULL, s, fmt, op[0],
+ (int) offset_expr.X_add_number, tempreg);
+ }
+ else if (offbits != 16)
+ {
+ /* The offset field is too narrow to be used for a low-part
+ relocation, so load the whole address into the auxillary
+ register. */
+ load_address (tempreg, &offset_expr, &used_at);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ if (offbits == 0)
+ macro_build (NULL, s, fmt, op[0], tempreg);
+ else
+ macro_build (NULL, s, fmt, op[0], 0, tempreg);
+ }
+ else if (mips_pic == NO_PIC)
+ {
+ /* If this is a reference to a GP relative symbol, and there
+ is no base register, we want
+ <op> op[0],<sym>($gp) (BFD_RELOC_GPREL16)
+ Otherwise, if there is no base register, we want
+ lui $tempreg,<sym> (BFD_RELOC_HI16_S)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
+ If we have a constant, we need two instructions anyhow,
+ so we always use the latter form.
- if (insn != NULL || !mips_opts.micromips)
- break;
- if (forced_insn_length)
- break;
+ If we have a base register, and this is a reference to a
+ GP relative symbol, we want
+ addu $tempreg,$breg,$gp
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_GPREL16)
+ Otherwise we want
+ lui $tempreg,<sym> (BFD_RELOC_HI16_S)
+ addu $tempreg,$tempreg,$breg
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
+ With a constant we always use the latter case.
- /* See if there's an instruction size override suffix,
- either `16' or `32', at the end of the mnemonic proper,
- that defines the operation, i.e. before the first `.'
- character if any. Strip it and retry. */
- dot = strchr (name, '.');
- opend = dot != NULL ? dot - name : end;
- if (opend < 3)
- break;
- if (name[opend - 2] == '1' && name[opend - 1] == '6')
- forced_insn_length = 2;
- else if (name[opend - 2] == '3' && name[opend - 1] == '2')
- forced_insn_length = 4;
- else
- break;
- memcpy (name + opend - 2, name + opend, end - opend + 1);
- }
- if (insn == NULL)
- {
- insn_error = _("Unrecognized opcode");
- return;
- }
+ With 64bit address space and no base register and $at usable,
+ we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ lui $at,<sym> (BFD_RELOC_HI16_S)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ dsll32 $tempreg,0
+ daddu $tempreg,$at
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
+ If we have a base register, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ lui $at,<sym> (BFD_RELOC_HI16_S)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ daddu $at,$breg
+ dsll32 $tempreg,0
+ daddu $tempreg,$at
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
- /* For microMIPS instructions placed in a fixed-length branch delay slot
- we make up to two passes over the relevant fragment of the opcode
- table. First we try instructions that meet the delay slot's length
- requirement. If none matched, then we retry with the remaining ones
- and if one matches, then we use it and then issue an appropriate
- warning later on. */
- argsStart = s = str + end;
- for (;;)
- {
- bfd_boolean delay_slot_ok;
- bfd_boolean size_ok;
- bfd_boolean ok;
+ Without $at we can't generate the optimal path for superscalar
+ processors here since this would require two temporary registers.
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ dsll $tempreg,16
+ daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
+ dsll $tempreg,16
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
+ If we have a base register, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ dsll $tempreg,16
+ daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
+ dsll $tempreg,16
+ daddu $tempreg,$tempreg,$breg
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
- gas_assert (strcmp (insn->name, name) == 0);
+ For GP relative symbols in 64bit address space we can use
+ the same sequence as in 32bit address space. */
+ if (HAVE_64BIT_SYMBOLS)
+ {
+ if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ if (breg == 0)
+ {
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_GPREL16, mips_gp_register);
+ }
+ else
+ {
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, breg, mips_gp_register);
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_GPREL16, tempreg);
+ }
+ relax_switch ();
+ }
- ok = is_opcode_valid (insn);
- size_ok = is_size_valid (insn);
- delay_slot_ok = is_delay_slot_valid (insn);
- if (!delay_slot_ok && !wrong_delay_slot_insns)
- {
- firstinsn = insn;
- wrong_delay_slot_insns = TRUE;
- }
- if (!ok || !size_ok || delay_slot_ok != need_delay_slot_ok)
- {
- static char buf[256];
+ if (used_at == 0 && mips_opts.at)
+ {
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
+ BFD_RELOC_MIPS_HIGHEST);
+ macro_build (&offset_expr, "lui", LUI_FMT, AT,
+ BFD_RELOC_HI16_S);
+ macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
+ tempreg, BFD_RELOC_MIPS_HIGHER);
+ if (breg != 0)
+ macro_build (NULL, "daddu", "d,v,t", AT, AT, breg);
+ macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0);
+ macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT);
+ macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_LO16,
+ tempreg);
+ used_at = 1;
+ }
+ else
+ {
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
+ BFD_RELOC_MIPS_HIGHEST);
+ macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
+ tempreg, BFD_RELOC_MIPS_HIGHER);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
+ macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
+ tempreg, BFD_RELOC_HI16_S);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
+ if (breg != 0)
+ macro_build (NULL, "daddu", "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_LO16, tempreg);
+ }
- if (insn + 1 < past && strcmp (insn->name, insn[1].name) == 0)
- {
- ++insn;
- continue;
+ if (mips_relax.sequence)
+ relax_end ();
+ break;
}
- if (wrong_delay_slot_insns && need_delay_slot_ok)
+
+ if (breg == 0)
{
- gas_assert (firstinsn);
- need_delay_slot_ok = FALSE;
- past = insn + 1;
- insn = firstinsn;
- continue;
+ if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_GPREL16,
+ mips_gp_register);
+ relax_switch ();
+ }
+ macro_build_lui (&offset_expr, tempreg);
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_LO16, tempreg);
+ if (mips_relax.sequence)
+ relax_end ();
}
-
- if (insn_error)
- return;
-
- if (!ok)
- sprintf (buf, _("Opcode not supported on this processor: %s (%s)"),
- mips_cpu_info_from_arch (mips_opts.arch)->name,
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- else if (mips_opts.insn32)
- sprintf (buf, _("Opcode not supported in the `insn32' mode"));
else
- sprintf (buf, _("Unrecognized %u-bit version of microMIPS opcode"),
- 8 * forced_insn_length);
- insn_error = buf;
-
- return;
- }
-
- imm_expr.X_op = O_absent;
- imm2_expr.X_op = O_absent;
- offset_expr.X_op = O_absent;
- imm_reloc[0] = BFD_RELOC_UNUSED;
- imm_reloc[1] = BFD_RELOC_UNUSED;
- imm_reloc[2] = BFD_RELOC_UNUSED;
- offset_reloc[0] = BFD_RELOC_UNUSED;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
-
- create_insn (ip, insn);
- insn_error = NULL;
- argnum = 1;
- lastregno = 0xffffffff;
- for (args = insn->args;; ++args)
- {
- int is_mdmx;
-
- s += strspn (s, " \t");
- is_mdmx = 0;
- switch (*args)
{
- case '\0': /* end of args */
- if (*s == '\0')
- return;
- break;
-
- case '2':
- /* DSP 2-bit unsigned immediate in bit 11 (for standard MIPS
- code) or 14 (for microMIPS code). */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number != 1
- && (unsigned long) imm_expr.X_add_number != 3)
+ if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
{
- as_bad (_("BALIGN immediate not 1 or 3 (%lu)"),
- (unsigned long) imm_expr.X_add_number);
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, breg, mips_gp_register);
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_GPREL16, tempreg);
+ relax_switch ();
}
- INSERT_OPERAND (mips_opts.micromips,
- BP, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case '3':
- /* DSP 3-bit unsigned immediate in bit 21 (for standard MIPS
- code) or 13 (for microMIPS code). */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_SA3 : OP_MASK_SA3);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- SA3, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
-
- case '4':
- /* DSP 4-bit unsigned immediate in bit 21 (for standard MIPS
- code) or 12 (for microMIPS code). */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_SA4 : OP_MASK_SA4);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- SA4, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ macro_build_lui (&offset_expr, tempreg);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_LO16, tempreg);
+ if (mips_relax.sequence)
+ relax_end ();
+ }
+ }
+ else if (!mips_big_got)
+ {
+ int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
- case '5':
- /* DSP 8-bit unsigned immediate in bit 16 (for standard MIPS
- code) or 13 (for microMIPS code). */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_IMM8 : OP_MASK_IMM8);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- IMM8, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ /* If this is a reference to an external symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ <op> op[0],0($tempreg)
+ Otherwise we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
+ <op> op[0],0($tempreg)
- case '6':
- /* DSP 5-bit unsigned immediate in bit 21 (for standard MIPS
- code) or 16 (for microMIPS code). */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_RS : OP_MASK_RS);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- RS, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ For NewABI, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST)
- case '7':
- /* Four DSP accumulators in bit 11 (for standard MIPS code)
- or 14 (for microMIPS code). */
- if (s[0] == '$' && s[1] == 'a' && s[2] == 'c'
- && s[3] >= '0' && s[3] <= '3')
- {
- regno = s[3] - '0';
- s += 4;
- INSERT_OPERAND (mips_opts.micromips, DSPACC, *ip, regno);
- continue;
- }
- else
- as_bad (_("Invalid dsp acc register"));
+ If there is a base register, we add it to $tempreg before
+ the <op>. If there is a constant, we stick it in the
+ <op> instruction. We don't handle constants larger than
+ 16 bits, because we have no way to load the upper 16 bits
+ (actually, we could handle them for the subset of cases
+ in which we are not using $at). */
+ gas_assert (offset_expr.X_op == O_symbol);
+ if (HAVE_NEWABI)
+ {
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_MIPS_GOT_OFST, tempreg);
break;
+ }
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ if (expr1.X_add_number < -0x8000
+ || expr1.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ lw_reloc_type, mips_gp_register);
+ load_delay_nop ();
+ relax_start (offset_expr.X_add_symbol);
+ relax_switch ();
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg,
+ tempreg, BFD_RELOC_LO16);
+ relax_end ();
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
+ }
+ else if (mips_big_got && !HAVE_NEWABI)
+ {
+ int gpdelay;
- case '8':
- /* DSP 6-bit unsigned immediate in bit 11 (for standard MIPS
- code) or 14 (for microMIPS code). */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_WRDSP
- : OP_MASK_WRDSP);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- WRDSP, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ /* If this is a reference to an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ <op> op[0],0($tempreg)
+ Otherwise we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
+ <op> op[0],0($tempreg)
+ If there is a base register, we add it to $tempreg before
+ the <op>. If there is a constant, we stick it in the
+ <op> instruction. We don't handle constants larger than
+ 16 bits, because we have no way to load the upper 16 bits
+ (actually, we could handle them for the subset of cases
+ in which we are not using $at). */
+ gas_assert (offset_expr.X_op == O_symbol);
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ if (expr1.X_add_number < -0x8000
+ || expr1.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ gpdelay = reg_needs_delay (mips_gp_register);
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
+ BFD_RELOC_MIPS_GOT_HI16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg,
+ mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_LO16, tempreg);
+ relax_switch ();
+ if (gpdelay)
+ macro_build (NULL, "nop", "");
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ load_delay_nop ();
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg,
+ tempreg, BFD_RELOC_LO16);
+ relax_end ();
- case '9': /* Four DSP accumulators in bits 21,22. */
- gas_assert (!mips_opts.micromips);
- if (s[0] == '$' && s[1] == 'a' && s[2] == 'c'
- && s[3] >= '0' && s[3] <= '3')
- {
- regno = s[3] - '0';
- s += 4;
- INSERT_OPERAND (0, DSPACC_S, *ip, regno);
- continue;
- }
- else
- as_bad (_("Invalid dsp acc register"));
- break;
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
+ }
+ else if (mips_big_got && HAVE_NEWABI)
+ {
+ /* If this is a reference to an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ add $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ <op> op[0],<ofst>($tempreg)
+ Otherwise, for local symbols, we want:
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST) */
+ gas_assert (offset_expr.X_op == O_symbol);
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ if (expr1.X_add_number < -0x8000
+ || expr1.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
+ BFD_RELOC_MIPS_GOT_HI16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg,
+ mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_LO16, tempreg);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
- case '0':
- /* DSP 6-bit signed immediate in bit 20 (for standard MIPS
- code) or 16 (for microMIPS code). */
- {
- long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_DSPSFT : OP_MASK_DSPSFT);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((mask + 1) >> 1);
- max_range = ((mask + 1) >> 1) - 1;
- if (imm_expr.X_add_number < min_range
- || imm_expr.X_add_number > max_range)
- as_bad (_("DSP immediate not in range %ld..%ld (%ld)"),
- (long) min_range, (long) max_range,
- (long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- DSPSFT, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ relax_switch ();
+ offset_expr.X_add_number = expr1.X_add_number;
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
+ BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&offset_expr, s, fmt, op[0],
+ BFD_RELOC_MIPS_GOT_OFST, tempreg);
+ relax_end ();
+ }
+ else
+ abort ();
- case '\'': /* DSP 6-bit unsigned immediate in bit 16. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_RDDSP)
- {
- as_bad (_("DSP immediate not in range 0..%d (%lu)"),
- OP_MASK_RDDSP,
- (unsigned long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (0, RDDSP, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ break;
- case ':': /* DSP 7-bit signed immediate in bit 19. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((OP_MASK_DSPSFT_7 + 1) >> 1);
- max_range = ((OP_MASK_DSPSFT_7 + 1) >> 1) - 1;
- if (imm_expr.X_add_number < min_range ||
- imm_expr.X_add_number > max_range)
- {
- as_bad (_("DSP immediate not in range %ld..%ld (%ld)"),
- (long) min_range, (long) max_range,
- (long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (0, DSPSFT_7, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_JRADDIUSP:
+ gas_assert (mips_opts.micromips);
+ gas_assert (mips_opts.insn32);
+ start_noreorder ();
+ macro_build (NULL, "jr", "s", RA);
+ expr1.X_add_number = op[0] << 2;
+ macro_build (&expr1, "addiu", "t,r,j", SP, SP, BFD_RELOC_LO16);
+ end_noreorder ();
+ break;
- case '@': /* DSP 10-bit signed immediate in bit 16. */
- {
- long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_IMM10 : OP_MASK_IMM10);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((mask + 1) >> 1);
- max_range = ((mask + 1) >> 1) - 1;
- if (imm_expr.X_add_number < min_range
- || imm_expr.X_add_number > max_range)
- as_bad (_("DSP immediate not in range %ld..%ld (%ld)"),
- (long) min_range, (long) max_range,
- (long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- IMM10, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ case M_JRC:
+ gas_assert (mips_opts.micromips);
+ gas_assert (mips_opts.insn32);
+ macro_build (NULL, "jr", "s", op[0]);
+ if (mips_opts.noreorder)
+ macro_build (NULL, "nop", "");
+ break;
- case '^': /* DSP 5-bit unsigned immediate in bit 11. */
- gas_assert (mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~MICROMIPSOP_MASK_RD)
- as_bad (_("DSP immediate not in range 0..%d (%lu)"),
- MICROMIPSOP_MASK_RD,
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (1, RD, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_LI:
+ case M_LI_S:
+ load_register (op[0], &imm_expr, 0);
+ break;
- case '!': /* MT usermode flag bit. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_MT_U)
- as_bad (_("MT usermode bit not 0 or 1 (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (0, MT_U, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_DLI:
+ load_register (op[0], &imm_expr, 1);
+ break;
- case '$': /* MT load high flag bit. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_MT_H)
- as_bad (_("MT load high bit not 0 or 1 (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (0, MT_H, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_LI_SS:
+ if (imm_expr.X_op == O_constant)
+ {
+ used_at = 1;
+ load_register (AT, &imm_expr, 0);
+ macro_build (NULL, "mtc1", "t,G", AT, op[0]);
+ break;
+ }
+ else
+ {
+ gas_assert (imm_expr.X_op == O_absent
+ && offset_expr.X_op == O_symbol
+ && strcmp (segment_name (S_GET_SEGMENT
+ (offset_expr.X_add_symbol)),
+ ".lit4") == 0
+ && offset_expr.X_add_number == 0);
+ macro_build (&offset_expr, "lwc1", "T,o(b)", op[0],
+ BFD_RELOC_MIPS_LITERAL, mips_gp_register);
+ break;
+ }
- case '*': /* Four DSP accumulators in bits 18,19. */
- gas_assert (!mips_opts.micromips);
- if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
- s[3] >= '0' && s[3] <= '3')
- {
- regno = s[3] - '0';
- s += 4;
- INSERT_OPERAND (0, MTACC_T, *ip, regno);
- continue;
- }
- else
- as_bad (_("Invalid dsp/smartmips acc register"));
- break;
+ case M_LI_D:
+ /* Check if we have a constant in IMM_EXPR. If the GPRs are 64 bits
+ wide, IMM_EXPR is the entire value. Otherwise IMM_EXPR is the high
+ order 32 bits of the value and the low order 32 bits are either
+ zero or in OFFSET_EXPR. */
+ if (imm_expr.X_op == O_constant)
+ {
+ if (HAVE_64BIT_GPRS)
+ load_register (op[0], &imm_expr, 1);
+ else
+ {
+ int hreg, lreg;
- case '&': /* Four DSP accumulators in bits 13,14. */
- gas_assert (!mips_opts.micromips);
- if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
- s[3] >= '0' && s[3] <= '3')
+ if (target_big_endian)
{
- regno = s[3] - '0';
- s += 4;
- INSERT_OPERAND (0, MTACC_D, *ip, regno);
- continue;
+ hreg = op[0];
+ lreg = op[0] + 1;
}
else
- as_bad (_("Invalid dsp/smartmips acc register"));
- break;
-
- case '\\': /* 3-bit bit position. */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_3BITPOS
- : OP_MASK_3BITPOS);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_warn (_("Bit position for %s not in range 0..%lu (%lu)"),
- ip->insn_mo->name,
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- 3BITPOS, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
-
- case ',':
- ++argnum;
- if (*s++ == *args)
- continue;
- s--;
- switch (*++args)
{
- case 'r':
- case 'v':
- INSERT_OPERAND (mips_opts.micromips, RS, *ip, lastregno);
- continue;
-
- case 'w':
- INSERT_OPERAND (mips_opts.micromips, RT, *ip, lastregno);
- continue;
-
- case 'W':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, FT, *ip, lastregno);
- continue;
-
- case 'V':
- INSERT_OPERAND (mips_opts.micromips, FS, *ip, lastregno);
- continue;
+ hreg = op[0] + 1;
+ lreg = op[0];
}
- break;
-
- case '(':
- /* Handle optional base register.
- Either the base register is omitted or
- we must have a left paren. */
- /* This is dependent on the next operand specifier
- is a base register specification. */
- gas_assert (args[1] == 'b'
- || (mips_opts.micromips
- && args[1] == 'm'
- && (args[2] == 'l' || args[2] == 'n'
- || args[2] == 's' || args[2] == 'a')));
- if (*s == '\0' && args[1] == 'b')
- return;
- /* Fall through. */
-
- case ')': /* These must match exactly. */
- if (*s++ == *args)
- continue;
- break;
- case '+': /* Opcode extension character. */
- switch (*++args)
+ if (hreg <= 31)
+ load_register (hreg, &imm_expr, 0);
+ if (lreg <= 31)
{
- case '1': /* UDI immediates. */
- case '2':
- case '3':
- case '4':
- gas_assert (!mips_opts.micromips);
- {
- const struct mips_immed *imm = mips_immed;
-
- while (imm->type && imm->type != *args)
- ++imm;
- if (! imm->type)
- abort ();
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number & ~imm->mask)
- {
- as_warn (_("Illegal %s number (%lu, 0x%lx)"),
- imm->desc ? imm->desc : ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number,
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= imm->mask;
- }
- ip->insn_opcode |= ((unsigned long) imm_expr.X_add_number
- << imm->shift);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
-
- case 'J': /* 10-bit hypcall code. */
- gas_assert (!mips_opts.micromips);
- {
- unsigned long mask = OP_MASK_CODE10;
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_warn (_("Code for %s not in range 0..%lu (%lu)"),
- ip->insn_mo->name,
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (0, CODE10, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
-
- case 'A': /* ins/ext position, becomes LSB. */
- limlo = 0;
- limhi = 31;
- goto do_lsb;
- case 'E':
- limlo = 32;
- limhi = 63;
- goto do_lsb;
- do_lsb:
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number < limlo
- || (unsigned long) imm_expr.X_add_number > limhi)
- {
- as_bad (_("Improper position (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number = limlo;
- }
- lastpos = imm_expr.X_add_number;
- INSERT_OPERAND (mips_opts.micromips,
- EXTLSB, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'B': /* ins size, becomes MSB. */
- limlo = 1;
- limhi = 32;
- goto do_msb;
- case 'F':
- limlo = 33;
- limhi = 64;
- goto do_msb;
- do_msb:
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- /* Check for negative input so that small negative numbers
- will not succeed incorrectly. The checks against
- (pos+size) transitively check "size" itself,
- assuming that "pos" is reasonable. */
- if ((long) imm_expr.X_add_number < 0
- || ((unsigned long) imm_expr.X_add_number
- + lastpos) < limlo
- || ((unsigned long) imm_expr.X_add_number
- + lastpos) > limhi)
- {
- as_bad (_("Improper insert size (%lu, position %lu)"),
- (unsigned long) imm_expr.X_add_number,
- (unsigned long) lastpos);
- imm_expr.X_add_number = limlo - lastpos;
- }
- INSERT_OPERAND (mips_opts.micromips, INSMSB, *ip,
- lastpos + imm_expr.X_add_number - 1);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'C': /* ext size, becomes MSBD. */
- limlo = 1;
- limhi = 32;
- sizelo = 1;
- goto do_msbd;
- case 'G':
- limlo = 33;
- limhi = 64;
- sizelo = 33;
- goto do_msbd;
- case 'H':
- limlo = 33;
- limhi = 64;
- sizelo = 1;
- goto do_msbd;
- do_msbd:
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- /* The checks against (pos+size) don't transitively check
- "size" itself, assuming that "pos" is reasonable.
- We also need to check the lower bound of "size". */
- if ((long) imm_expr.X_add_number < sizelo
- || ((unsigned long) imm_expr.X_add_number
- + lastpos) < limlo
- || ((unsigned long) imm_expr.X_add_number
- + lastpos) > limhi)
- {
- as_bad (_("Improper extract size (%lu, position %lu)"),
- (unsigned long) imm_expr.X_add_number,
- (unsigned long) lastpos);
- imm_expr.X_add_number = limlo - lastpos;
- }
- INSERT_OPERAND (mips_opts.micromips,
- EXTMSBD, *ip, imm_expr.X_add_number - 1);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'I':
- /* "+I" is like "I", except that imm2_expr is used. */
- my_getExpression (&imm2_expr, s);
- if (imm2_expr.X_op != O_big
- && imm2_expr.X_op != O_constant)
- insn_error = _("absolute expression required");
- if (HAVE_32BIT_GPRS)
- normalize_constant_expr (&imm2_expr);
- s = expr_end;
- continue;
-
- case 't': /* Coprocessor register number. */
- gas_assert (!mips_opts.micromips);
- if (s[0] == '$' && ISDIGIT (s[1]))
- {
- ++s;
- regno = 0;
- do
- {
- regno *= 10;
- regno += *s - '0';
- ++s;
- }
- while (ISDIGIT (*s));
- if (regno > 31)
- as_bad (_("Invalid register number (%d)"), regno);
- else
- {
- INSERT_OPERAND (0, RT, *ip, regno);
- continue;
- }
- }
+ if (offset_expr.X_op == O_absent)
+ move_register (lreg, 0);
else
- as_bad (_("Invalid coprocessor 0 register number"));
- break;
-
- case 'x':
- /* bbit[01] and bbit[01]32 bit index. Give error if index
- is not in the valid range. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned) imm_expr.X_add_number > 31)
- {
- as_bad (_("Improper bit index (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
- }
- INSERT_OPERAND (0, BBITIND, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'X':
- /* bbit[01] bit index when bbit is used but we generate
- bbit[01]32 because the index is over 32. Move to the
- next candidate if index is not in the valid range. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned) imm_expr.X_add_number < 32
- || (unsigned) imm_expr.X_add_number > 63)
- break;
- INSERT_OPERAND (0, BBITIND, *ip, imm_expr.X_add_number - 32);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'p':
- /* cins, cins32, exts and exts32 position field. Give error
- if it's not in the valid range. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned) imm_expr.X_add_number > 31)
{
- as_bad (_("Improper position (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
+ gas_assert (offset_expr.X_op == O_constant);
+ load_register (lreg, &offset_expr, 0);
}
- lastpos = imm_expr.X_add_number;
- INSERT_OPERAND (0, CINSPOS, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ }
+ }
+ break;
+ }
+ gas_assert (imm_expr.X_op == O_absent);
- case 'P':
- /* cins, cins32, exts and exts32 position field. Move to
- the next candidate if it's not in the valid range. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned) imm_expr.X_add_number < 32
- || (unsigned) imm_expr.X_add_number > 63)
- break;
- lastpos = imm_expr.X_add_number;
- INSERT_OPERAND (0, CINSPOS, *ip, imm_expr.X_add_number - 32);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ /* We know that sym is in the .rdata section. First we get the
+ upper 16 bits of the address. */
+ if (mips_pic == NO_PIC)
+ {
+ macro_build_lui (&offset_expr, AT);
+ used_at = 1;
+ }
+ else
+ {
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ used_at = 1;
+ }
- case 's':
- /* cins32 and exts32 length-minus-one field. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 31
- || (unsigned long) imm_expr.X_add_number + lastpos > 31)
- {
- as_bad (_("Improper size (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
- }
- INSERT_OPERAND (0, CINSLM1, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ /* Now we load the register(s). */
+ if (HAVE_64BIT_GPRS)
+ {
+ used_at = 1;
+ macro_build (&offset_expr, "ld", "t,o(b)", op[0],
+ BFD_RELOC_LO16, AT);
+ }
+ else
+ {
+ used_at = 1;
+ macro_build (&offset_expr, "lw", "t,o(b)", op[0],
+ BFD_RELOC_LO16, AT);
+ if (op[0] != RA)
+ {
+ /* FIXME: How in the world do we deal with the possible
+ overflow here? */
+ offset_expr.X_add_number += 4;
+ macro_build (&offset_expr, "lw", "t,o(b)",
+ op[0] + 1, BFD_RELOC_LO16, AT);
+ }
+ }
+ break;
- case 'S':
- /* cins/exts length-minus-one field. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 31
- || (unsigned long) imm_expr.X_add_number + lastpos > 63)
- {
- as_bad (_("Improper size (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
- }
- INSERT_OPERAND (0, CINSLM1, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_LI_DD:
+ /* Check if we have a constant in IMM_EXPR. If the FPRs are 64 bits
+ wide, IMM_EXPR is the entire value and the GPRs are known to be 64
+ bits wide as well. Otherwise IMM_EXPR is the high order 32 bits of
+ the value and the low order 32 bits are either zero or in
+ OFFSET_EXPR. */
+ if (imm_expr.X_op == O_constant)
+ {
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_FPRS);
+ if (HAVE_64BIT_FPRS)
+ {
+ gas_assert (HAVE_64BIT_GPRS);
+ macro_build (NULL, "dmtc1", "t,S", AT, op[0]);
+ }
+ else
+ {
+ macro_build (NULL, "mtc1", "t,G", AT, op[0] + 1);
+ if (offset_expr.X_op == O_absent)
+ macro_build (NULL, "mtc1", "t,G", 0, op[0]);
+ else
+ {
+ gas_assert (offset_expr.X_op == O_constant);
+ load_register (AT, &offset_expr, 0);
+ macro_build (NULL, "mtc1", "t,G", AT, op[0]);
+ }
+ }
+ break;
+ }
- case 'Q':
- /* seqi/snei immediate field. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((long) imm_expr.X_add_number < -512
- || (long) imm_expr.X_add_number >= 512)
- {
- as_bad (_("Improper immediate (%ld)"),
- (long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
- }
- INSERT_OPERAND (0, SEQI, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ gas_assert (imm_expr.X_op == O_absent
+ && offset_expr.X_op == O_symbol
+ && offset_expr.X_add_number == 0);
+ s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol));
+ if (strcmp (s, ".lit8") == 0)
+ {
+ op[2] = mips_gp_register;
+ offset_reloc[0] = BFD_RELOC_MIPS_LITERAL;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
+ }
+ else
+ {
+ gas_assert (strcmp (s, RDATA_SECTION_NAME) == 0);
+ used_at = 1;
+ if (mips_pic != NO_PIC)
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ else
+ {
+ /* FIXME: This won't work for a 64 bit address. */
+ macro_build_lui (&offset_expr, AT);
+ }
- case 'a': /* 8-bit signed offset in bit 6 */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((OP_MASK_OFFSET_A + 1) >> 1);
- max_range = ((OP_MASK_OFFSET_A + 1) >> 1) - 1;
- if (imm_expr.X_add_number < min_range
- || imm_expr.X_add_number > max_range)
- {
- as_bad (_("Offset not in range %ld..%ld (%ld)"),
- (long) min_range, (long) max_range,
- (long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (0, OFFSET_A, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ op[2] = AT;
+ offset_reloc[0] = BFD_RELOC_LO16;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
+ }
+ align = 8;
+ /* Fall through */
- case 'b': /* 8-bit signed offset in bit 3 */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((OP_MASK_OFFSET_B + 1) >> 1);
- max_range = ((OP_MASK_OFFSET_B + 1) >> 1) - 1;
- if (imm_expr.X_add_number < min_range
- || imm_expr.X_add_number > max_range)
- {
- as_bad (_("Offset not in range %ld..%ld (%ld)"),
- (long) min_range, (long) max_range,
- (long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (0, OFFSET_B, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_L_DAB:
+ /*
+ * The MIPS assembler seems to check for X_add_number not
+ * being double aligned and generating:
+ * lui at,%hi(foo+1)
+ * addu at,at,v1
+ * addiu at,at,%lo(foo+1)
+ * lwc1 f2,0(at)
+ * lwc1 f3,4(at)
+ * But, the resulting address is the same after relocation so why
+ * generate the extra instruction?
+ */
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ fmt = "T,o(b)";
+ if (CPU_HAS_LDC1_SDC1 (mips_opts.arch))
+ {
+ s = "ldc1";
+ goto ld_st;
+ }
+ s = "lwc1";
+ goto ldd_std;
- case 'c': /* 9-bit signed offset in bit 6 */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((OP_MASK_OFFSET_C + 1) >> 1);
- max_range = ((OP_MASK_OFFSET_C + 1) >> 1) - 1;
- /* We check the offset range before adjusted. */
- min_range <<= 4;
- max_range <<= 4;
- if (imm_expr.X_add_number < min_range
- || imm_expr.X_add_number > max_range)
- {
- as_bad (_("Offset not in range %ld..%ld (%ld)"),
- (long) min_range, (long) max_range,
- (long) imm_expr.X_add_number);
- }
- if (imm_expr.X_add_number & 0xf)
- {
- as_bad (_("Offset not 16 bytes alignment (%ld)"),
- (long) imm_expr.X_add_number);
- }
- /* Right shift 4 bits to adjust the offset operand. */
- INSERT_OPERAND (0, OFFSET_C, *ip,
- imm_expr.X_add_number >> 4);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_S_DAB:
+ gas_assert (!mips_opts.micromips);
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ fmt = "T,o(b)";
+ if (CPU_HAS_LDC1_SDC1 (mips_opts.arch))
+ {
+ s = "sdc1";
+ goto ld_st;
+ }
+ s = "swc1";
+ goto ldd_std;
- case 'z':
- gas_assert (!mips_opts.micromips);
- if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no))
- break;
- if (regno == AT && mips_opts.at)
- {
- if (mips_opts.at == ATREG)
- as_warn (_("used $at without \".set noat\""));
- else
- as_warn (_("used $%u with \".set at=$%u\""),
- regno, mips_opts.at);
- }
- INSERT_OPERAND (0, RZ, *ip, regno);
- continue;
+ case M_LQ_AB:
+ fmt = "t,o(b)";
+ s = "lq";
+ goto ld;
- case 'Z':
- gas_assert (!mips_opts.micromips);
- if (!reg_lookup (&s, RTYPE_FPU, ®no))
- break;
- INSERT_OPERAND (0, FZ, *ip, regno);
- continue;
+ case M_SQ_AB:
+ fmt = "t,o(b)";
+ s = "sq";
+ goto ld_st;
- case 'i':
- goto jump;
-
- case 'j':
- {
- int shift = 8;
- size_t i;
- /* Check whether there is only a single bracketed expression
- left. If so, it must be the base register and the
- constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- continue;
-
- /* If this value won't fit into the offset, then go find
- a macro that will generate a 16- or 32-bit offset code
- pattern. */
- i = my_getSmallExpression (&imm_expr, imm_reloc, s);
- if ((i == 0 && (imm_expr.X_op != O_constant
- || imm_expr.X_add_number >= 1 << shift
- || imm_expr.X_add_number < -1 << shift))
- || i > 0)
- {
- imm_expr.X_op = O_absent;
- break;
- }
- INSERT_OPERAND (mips_opts.micromips, EVAOFFSET, *ip,
- imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ case M_LD_AB:
+ fmt = "t,o(b)";
+ if (HAVE_64BIT_GPRS)
+ {
+ s = "ld";
+ goto ld;
+ }
+ s = "lw";
+ goto ldd_std;
- default:
- as_bad (_("Internal error: bad %s opcode "
- "(unknown extension operand type `+%c'): %s %s"),
- mips_opts.micromips ? "microMIPS" : "MIPS",
- *args, insn->name, insn->args);
- /* Further processing is fruitless. */
- return;
- }
- break;
+ case M_SD_AB:
+ fmt = "t,o(b)";
+ if (HAVE_64BIT_GPRS)
+ {
+ s = "sd";
+ goto ld_st;
+ }
+ s = "sw";
- case '.': /* 10-bit offset. */
- gas_assert (mips_opts.micromips);
- case '~': /* 12-bit offset. */
- {
- int shift = *args == '.' ? 9 : 11;
- size_t i;
+ ldd_std:
+ /* Even on a big endian machine $fn comes before $fn+1. We have
+ to adjust when loading from memory. We set coproc if we must
+ load $fn+1 first. */
+ /* Itbl support may require additional care here. */
+ if (!target_big_endian)
+ coproc = 0;
- /* Check whether there is only a single bracketed expression
- left. If so, it must be the base register and the
- constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- continue;
+ breg = op[2];
+ if (small_offset_p (0, align, 16))
+ {
+ ep = &offset_expr;
+ if (!small_offset_p (4, align, 16))
+ {
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", AT, breg,
+ -1, offset_reloc[0], offset_reloc[1],
+ offset_reloc[2]);
+ expr1.X_add_number = 0;
+ ep = &expr1;
+ breg = AT;
+ used_at = 1;
+ offset_reloc[0] = BFD_RELOC_LO16;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
+ }
+ if (strcmp (s, "lw") == 0 && op[0] == breg)
+ {
+ ep->X_add_number += 4;
+ macro_build (ep, s, fmt, op[0] + 1, -1, offset_reloc[0],
+ offset_reloc[1], offset_reloc[2], breg);
+ ep->X_add_number -= 4;
+ macro_build (ep, s, fmt, op[0], -1, offset_reloc[0],
+ offset_reloc[1], offset_reloc[2], breg);
+ }
+ else
+ {
+ macro_build (ep, s, fmt, coproc ? op[0] + 1 : op[0], -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2],
+ breg);
+ ep->X_add_number += 4;
+ macro_build (ep, s, fmt, coproc ? op[0] : op[0] + 1, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2],
+ breg);
+ }
+ break;
+ }
- /* If this value won't fit into the offset, then go find
- a macro that will generate a 16- or 32-bit offset code
- pattern. */
- i = my_getSmallExpression (&imm_expr, imm_reloc, s);
- if ((i == 0 && (imm_expr.X_op != O_constant
- || imm_expr.X_add_number >= 1 << shift
- || imm_expr.X_add_number < -1 << shift))
- || i > 0)
- {
- imm_expr.X_op = O_absent;
- break;
- }
- if (shift == 9)
- INSERT_OPERAND (1, OFFSET10, *ip, imm_expr.X_add_number);
- else
- INSERT_OPERAND (mips_opts.micromips,
- OFFSET12, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ if (offset_expr.X_op != O_symbol
+ && offset_expr.X_op != O_constant)
+ {
+ as_bad (_("expression too complex"));
+ offset_expr.X_op = O_constant;
+ }
- case '<': /* must be at least one digit */
- /*
- * According to the manual, if the shift amount is greater
- * than 31 or less than 0, then the shift amount should be
- * mod 32. In reality the mips assembler issues an error.
- * We issue a warning and mask out all but the low 5 bits.
- */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 31)
- as_warn (_("Improper shift amount (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- SHAMT, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ if (HAVE_32BIT_ADDRESSES
+ && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
+ {
+ char value [32];
- case '>': /* shift amount minus 32 */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number < 32
- || (unsigned long) imm_expr.X_add_number > 63)
- break;
- INSERT_OPERAND (mips_opts.micromips,
- SHAMT, *ip, imm_expr.X_add_number - 32);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ sprintf_vma (value, offset_expr.X_add_number);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
+ }
- case 'k': /* CACHE code. */
- case 'h': /* PREFX code. */
- case '1': /* SYNC type. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 31)
- as_warn (_("Invalid value for `%s' (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- switch (*args)
+ if (mips_pic == NO_PIC || offset_expr.X_op == O_constant)
+ {
+ /* If this is a reference to a GP relative symbol, we want
+ <op> op[0],<sym>($gp) (BFD_RELOC_GPREL16)
+ <op> op[0]+1,<sym>+4($gp) (BFD_RELOC_GPREL16)
+ If we have a base register, we use this
+ addu $at,$breg,$gp
+ <op> op[0],<sym>($at) (BFD_RELOC_GPREL16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_GPREL16)
+ If this is not a GP relative symbol, we want
+ lui $at,<sym> (BFD_RELOC_HI16_S)
+ <op> op[0],<sym>($at) (BFD_RELOC_LO16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16)
+ If there is a base register, we add it to $at after the
+ lui instruction. If there is a constant, we always use
+ the last case. */
+ if (offset_expr.X_op == O_symbol
+ && (valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ if (breg == 0)
{
- case 'k':
- if (mips_fix_cn63xxp1
- && !mips_opts.micromips
- && strcmp ("pref", insn->name) == 0)
- switch (imm_expr.X_add_number)
- {
- case 5:
- case 25:
- case 26:
- case 27:
- case 28:
- case 29:
- case 30:
- case 31: /* These are ok. */
- break;
-
- default: /* The rest must be changed to 28. */
- imm_expr.X_add_number = 28;
- break;
- }
- INSERT_OPERAND (mips_opts.micromips,
- CACHE, *ip, imm_expr.X_add_number);
- break;
- case 'h':
- INSERT_OPERAND (mips_opts.micromips,
- PREFX, *ip, imm_expr.X_add_number);
- break;
- case '1':
- INSERT_OPERAND (mips_opts.micromips,
- STYPE, *ip, imm_expr.X_add_number);
- break;
+ tempreg = mips_gp_register;
+ }
+ else
+ {
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ AT, breg, mips_gp_register);
+ tempreg = AT;
+ used_at = 1;
}
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'c': /* BREAK code. */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_CODE
- : OP_MASK_CODE);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_warn (_("Code for %s not in range 0..%lu (%lu)"),
- ip->insn_mo->name,
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- CODE, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
-
- case 'q': /* Lower BREAK code. */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_CODE2
- : OP_MASK_CODE2);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_warn (_("Lower code for %s not in range 0..%lu (%lu)"),
- ip->insn_mo->name,
- mask, (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- CODE2, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
-
- case 'B': /* 20- or 10-bit syscall/break/wait code. */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_CODE10
- : OP_MASK_CODE20);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_warn (_("Code for %s not in range 0..%lu (%lu)"),
- ip->insn_mo->name,
- mask, (unsigned long) imm_expr.X_add_number);
- if (mips_opts.micromips)
- INSERT_OPERAND (1, CODE10, *ip, imm_expr.X_add_number);
- else
- INSERT_OPERAND (0, CODE20, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
- case 'C': /* 25- or 23-bit coprocessor code. */
- {
- unsigned long mask = (mips_opts.micromips
- ? MICROMIPSOP_MASK_COPZ
- : OP_MASK_COPZ);
-
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > mask)
- as_warn (_("Coproccesor code > %u bits (%lu)"),
- mips_opts.micromips ? 23U : 25U,
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (mips_opts.micromips,
- COPZ, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- }
- continue;
+ /* Itbl support may require additional care here. */
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
+ BFD_RELOC_GPREL16, tempreg);
+ offset_expr.X_add_number += 4;
- case 'J': /* 19-bit WAIT code. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > OP_MASK_CODE19)
- {
- as_warn (_("Illegal 19-bit code (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_CODE19;
- }
- INSERT_OPERAND (0, CODE19, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ /* Set mips_optimize to 2 to avoid inserting an
+ undesired nop. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
+ /* Itbl support may require additional care here. */
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
+ BFD_RELOC_GPREL16, tempreg);
+ mips_optimize = hold_mips_optimize;
- case 'P': /* Performance register. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number != 0 && imm_expr.X_add_number != 1)
- as_warn (_("Invalid performance register (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- if (imm_expr.X_add_number != 0 && mips_opts.arch == CPU_R5900
- && (!strcmp(insn->name,"mfps") || !strcmp(insn->name,"mtps")))
- as_warn (_("Invalid performance register (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (0, PERFREG, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ relax_switch ();
- case 'G': /* Coprocessor destination register. */
- {
- unsigned long opcode = ip->insn_opcode;
- unsigned long mask;
- unsigned int types;
- int cop0;
-
- if (mips_opts.micromips)
- {
- mask = ~((MICROMIPSOP_MASK_RT << MICROMIPSOP_SH_RT)
- | (MICROMIPSOP_MASK_RS << MICROMIPSOP_SH_RS)
- | (MICROMIPSOP_MASK_SEL << MICROMIPSOP_SH_SEL));
- opcode &= mask;
- switch (opcode)
- {
- case 0x000000fc: /* mfc0 */
- case 0x000002fc: /* mtc0 */
- case 0x580000fc: /* dmfc0 */
- case 0x580002fc: /* dmtc0 */
- cop0 = 1;
- break;
- default:
- cop0 = 0;
- break;
- }
- }
- else
- {
- opcode = (opcode >> OP_SH_OP) & OP_MASK_OP;
- cop0 = opcode == OP_OP_COP0;
- }
- types = RTYPE_NUM | (cop0 ? RTYPE_CP0 : RTYPE_GP);
- ok = reg_lookup (&s, types, ®no);
- if (mips_opts.micromips)
- INSERT_OPERAND (1, RS, *ip, regno);
- else
- INSERT_OPERAND (0, RD, *ip, regno);
- if (ok)
- {
- lastregno = regno;
- continue;
- }
- }
- break;
+ offset_expr.X_add_number -= 4;
+ }
+ used_at = 1;
+ if (offset_high_part (offset_expr.X_add_number, 16)
+ != offset_high_part (offset_expr.X_add_number + 4, 16))
+ {
+ load_address (AT, &offset_expr, &used_at);
+ offset_expr.X_op = O_constant;
+ offset_expr.X_add_number = 0;
+ }
+ else
+ macro_build_lui (&offset_expr, AT);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
+ /* Itbl support may require additional care here. */
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
+ BFD_RELOC_LO16, AT);
+ /* FIXME: How do we handle overflow here? */
+ offset_expr.X_add_number += 4;
+ /* Itbl support may require additional care here. */
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
+ BFD_RELOC_LO16, AT);
+ if (mips_relax.sequence)
+ relax_end ();
+ }
+ else if (!mips_big_got)
+ {
+ /* If this is a reference to an external symbol, we want
+ lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ <op> op[0],0($at)
+ <op> op[0]+1,4($at)
+ Otherwise we want
+ lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ <op> op[0],<sym>($at) (BFD_RELOC_LO16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16)
+ If there is a base register we add it to $at before the
+ lwc1 instructions. If there is a constant we include it
+ in the lwc1 instructions. */
+ used_at = 1;
+ expr1.X_add_number = offset_expr.X_add_number;
+ if (expr1.X_add_number < -0x8000
+ || expr1.X_add_number >= 0x8000 - 4)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ load_got_offset (AT, &offset_expr);
+ load_delay_nop ();
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
- case 'y': /* ALNV.PS source register. */
- gas_assert (mips_opts.micromips);
- goto do_reg;
- case 'x': /* Ignore register name. */
- case 'U': /* Destination register (CLO/CLZ). */
- case 'g': /* Coprocessor destination register. */
- gas_assert (!mips_opts.micromips);
- case 'b': /* Base register. */
- case 'd': /* Destination register. */
- case 's': /* Source register. */
- case 't': /* Target register. */
- case 'r': /* Both target and source. */
- case 'v': /* Both dest and source. */
- case 'w': /* Both dest and target. */
- case 'E': /* Coprocessor target register. */
- case 'K': /* RDHWR destination register. */
- case 'z': /* Must be zero register. */
- do_reg:
- s_reset = s;
- if (*args == 'E' || *args == 'K')
- ok = reg_lookup (&s, RTYPE_NUM, ®no);
- else
- {
- ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no);
- if (regno == AT && mips_opts.at)
- {
- if (mips_opts.at == ATREG)
- as_warn (_("Used $at without \".set noat\""));
- else
- as_warn (_("Used $%u with \".set at=$%u\""),
- regno, mips_opts.at);
- }
- }
- if (ok)
- {
- c = *args;
- if (*s == ' ')
- ++s;
- if (args[1] != *s)
- {
- if (c == 'r' || c == 'v' || c == 'w')
- {
- regno = lastregno;
- s = s_reset;
- ++args;
- }
- }
- /* 'z' only matches $0. */
- if (c == 'z' && regno != 0)
- break;
+ /* Set mips_optimize to 2 to avoid inserting an undesired
+ nop. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
- if (c == 's' && !strncmp (ip->insn_mo->name, "jalr", 4))
- {
- if (regno == lastregno)
- {
- insn_error
- = _("Source and destination must be different");
- continue;
- }
- if (regno == 31 && lastregno == 0xffffffff)
- {
- insn_error
- = _("A destination register must be supplied");
- continue;
- }
- }
- /* Now that we have assembled one operand, we use the args
- string to figure out where it goes in the instruction. */
- switch (c)
- {
- case 'r':
- case 's':
- case 'v':
- case 'b':
- INSERT_OPERAND (mips_opts.micromips, RS, *ip, regno);
- break;
-
- case 'K':
- if (mips_opts.micromips)
- INSERT_OPERAND (1, RS, *ip, regno);
- else
- INSERT_OPERAND (0, RD, *ip, regno);
- break;
-
- case 'd':
- case 'g':
- INSERT_OPERAND (mips_opts.micromips, RD, *ip, regno);
- break;
-
- case 'U':
- gas_assert (!mips_opts.micromips);
- INSERT_OPERAND (0, RD, *ip, regno);
- INSERT_OPERAND (0, RT, *ip, regno);
- break;
-
- case 'w':
- case 't':
- case 'E':
- INSERT_OPERAND (mips_opts.micromips, RT, *ip, regno);
- break;
-
- case 'y':
- gas_assert (mips_opts.micromips);
- INSERT_OPERAND (1, RS3, *ip, regno);
- break;
-
- case 'x':
- /* This case exists because on the r3000 trunc
- expands into a macro which requires a gp
- register. On the r6000 or r4000 it is
- assembled into a single instruction which
- ignores the register. Thus the insn version
- is MIPS_ISA2 and uses 'x', and the macro
- version is MIPS_ISA1 and uses 't'. */
- break;
-
- case 'z':
- /* This case is for the div instruction, which
- acts differently if the destination argument
- is $0. This only matches $0, and is checked
- outside the switch. */
- break;
- }
- lastregno = regno;
- continue;
- }
- switch (*args++)
- {
- case 'r':
- case 'v':
- INSERT_OPERAND (mips_opts.micromips, RS, *ip, lastregno);
- continue;
+ /* Itbl support may require additional care here. */
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&expr1, s, fmt, coproc ? op[0] + 1 : op[0],
+ BFD_RELOC_LO16, AT);
+ expr1.X_add_number += 4;
+ macro_build (&expr1, s, fmt, coproc ? op[0] : op[0] + 1,
+ BFD_RELOC_LO16, AT);
+ relax_switch ();
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
+ BFD_RELOC_LO16, AT);
+ offset_expr.X_add_number += 4;
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
+ BFD_RELOC_LO16, AT);
+ relax_end ();
- case 'w':
- INSERT_OPERAND (mips_opts.micromips, RT, *ip, lastregno);
- continue;
- }
- break;
+ mips_optimize = hold_mips_optimize;
+ }
+ else if (mips_big_got)
+ {
+ int gpdelay;
- case 'O': /* MDMX alignment immediate constant. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > OP_MASK_ALN)
- as_warn (_("Improper align amount (%ld), using low bits"),
- (long) imm_expr.X_add_number);
- INSERT_OPERAND (0, ALN, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ /* If this is a reference to an external symbol, we want
+ lui $at,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $at,$at,$gp
+ lw $at,<sym>($at) (BFD_RELOC_MIPS_GOT_LO16)
+ nop
+ <op> op[0],0($at)
+ <op> op[0]+1,4($at)
+ Otherwise we want
+ lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ <op> op[0],<sym>($at) (BFD_RELOC_LO16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16)
+ If there is a base register we add it to $at before the
+ lwc1 instructions. If there is a constant we include it
+ in the lwc1 instructions. */
+ used_at = 1;
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ if (expr1.X_add_number < -0x8000
+ || expr1.X_add_number >= 0x8000 - 4)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ gpdelay = reg_needs_delay (mips_gp_register);
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, "lui", LUI_FMT,
+ AT, BFD_RELOC_MIPS_GOT_HI16);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ AT, AT, mips_gp_register);
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
+ AT, BFD_RELOC_MIPS_GOT_LO16, AT);
+ load_delay_nop ();
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
+ /* Itbl support may require additional care here. */
+ macro_build (&expr1, s, fmt, coproc ? op[0] + 1 : op[0],
+ BFD_RELOC_LO16, AT);
+ expr1.X_add_number += 4;
- case 'Q': /* MDMX vector, element sel, or const. */
- if (s[0] != '$')
- {
- /* MDMX Immediate. */
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > OP_MASK_FT)
- as_warn (_("Invalid MDMX Immediate (%ld)"),
- (long) imm_expr.X_add_number);
- INSERT_OPERAND (0, FT, *ip, imm_expr.X_add_number);
- if (ip->insn_opcode & (OP_MASK_VSEL << OP_SH_VSEL))
- ip->insn_opcode |= MDMX_FMTSEL_IMM_QH << OP_SH_VSEL;
- else
- ip->insn_opcode |= MDMX_FMTSEL_IMM_OB << OP_SH_VSEL;
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
- }
- /* Not MDMX Immediate. Fall through. */
- case 'X': /* MDMX destination register. */
- case 'Y': /* MDMX source register. */
- case 'Z': /* MDMX target register. */
- is_mdmx = !(insn->membership & INSN_5400);
- case 'W':
- gas_assert (!mips_opts.micromips);
- case 'D': /* Floating point destination register. */
- case 'S': /* Floating point source register. */
- case 'T': /* Floating point target register. */
- case 'R': /* Floating point source register. */
- case 'V':
- rtype = RTYPE_FPU;
- if (is_mdmx
- || ((mips_opts.ase & ASE_MDMX)
- && (ip->insn_mo->pinfo & FP_D)
- && (ip->insn_mo->pinfo & (INSN_COPROC_MOVE_DELAY
- | INSN_COPROC_MEMORY_DELAY
- | INSN_LOAD_COPROC_DELAY
- | INSN_LOAD_MEMORY_DELAY
- | INSN_STORE_MEMORY))))
- rtype |= RTYPE_VEC;
- s_reset = s;
- if (reg_lookup (&s, rtype, ®no))
- {
- if ((regno & 1) != 0
- && HAVE_32BIT_FPRS
- && !mips_oddfpreg_ok (ip->insn_mo, argnum))
- as_warn (_("Float register should be even, was %d"),
- regno);
-
- c = *args;
- if (*s == ' ')
- ++s;
- if (args[1] != *s)
- {
- if (c == 'V' || c == 'W')
- {
- regno = lastregno;
- s = s_reset;
- ++args;
- }
- }
- switch (c)
- {
- case 'D':
- case 'X':
- INSERT_OPERAND (mips_opts.micromips, FD, *ip, regno);
- break;
-
- case 'V':
- case 'S':
- case 'Y':
- INSERT_OPERAND (mips_opts.micromips, FS, *ip, regno);
- break;
-
- case 'Q':
- /* This is like 'Z', but also needs to fix the MDMX
- vector/scalar select bits. Note that the
- scalar immediate case is handled above. */
- if ((ip->insn_mo->membership & INSN_5400)
- && strcmp (insn->name, "rzu.ob") == 0)
- as_bad (_("Operand %d of `%s' must be an immediate"),
- argnum, ip->insn_mo->name);
-
- if (*s == '[')
- {
- int is_qh = (ip->insn_opcode & (1 << OP_SH_VSEL));
- int max_el = (is_qh ? 3 : 7);
- s++;
- my_getExpression(&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- s = expr_end;
- if (imm_expr.X_add_number > max_el)
- as_bad (_("Bad element selector %ld"),
- (long) imm_expr.X_add_number);
- imm_expr.X_add_number &= max_el;
- ip->insn_opcode |= (imm_expr.X_add_number
- << (OP_SH_VSEL +
- (is_qh ? 2 : 1)));
- imm_expr.X_op = O_absent;
- if (*s != ']')
- as_warn (_("Expecting ']' found '%s'"), s);
- else
- s++;
- }
- else
- {
- if ((ip->insn_mo->membership & INSN_5400)
- && (strcmp (insn->name, "sll.ob") == 0
- || strcmp (insn->name, "srl.ob") == 0))
- as_bad (_("Operand %d of `%s' must be scalar"),
- argnum, ip->insn_mo->name);
-
- if (ip->insn_opcode & (OP_MASK_VSEL << OP_SH_VSEL))
- ip->insn_opcode |= (MDMX_FMTSEL_VEC_QH
- << OP_SH_VSEL);
- else
- ip->insn_opcode |= (MDMX_FMTSEL_VEC_OB <<
- OP_SH_VSEL);
- }
- /* Fall through. */
- case 'W':
- case 'T':
- case 'Z':
- INSERT_OPERAND (mips_opts.micromips, FT, *ip, regno);
- break;
-
- case 'R':
- INSERT_OPERAND (mips_opts.micromips, FR, *ip, regno);
- break;
- }
- lastregno = regno;
- continue;
- }
+ /* Set mips_optimize to 2 to avoid inserting an undesired
+ nop. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
+ /* Itbl support may require additional care here. */
+ macro_build (&expr1, s, fmt, coproc ? op[0] : op[0] + 1,
+ BFD_RELOC_LO16, AT);
+ mips_optimize = hold_mips_optimize;
+ expr1.X_add_number -= 4;
- switch (*args++)
- {
- case 'V':
- INSERT_OPERAND (mips_opts.micromips, FS, *ip, lastregno);
- continue;
+ relax_switch ();
+ offset_expr.X_add_number = expr1.X_add_number;
+ if (gpdelay)
+ macro_build (NULL, "nop", "");
+ macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
+ BFD_RELOC_MIPS_GOT16, mips_gp_register);
+ load_delay_nop ();
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
+ /* Itbl support may require additional care here. */
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
+ BFD_RELOC_LO16, AT);
+ offset_expr.X_add_number += 4;
- case 'W':
- INSERT_OPERAND (mips_opts.micromips, FT, *ip, lastregno);
- continue;
- }
- break;
+ /* Set mips_optimize to 2 to avoid inserting an undesired
+ nop. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
+ /* Itbl support may require additional care here. */
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
+ BFD_RELOC_LO16, AT);
+ mips_optimize = hold_mips_optimize;
+ relax_end ();
+ }
+ else
+ abort ();
- case 'I':
- my_getExpression (&imm_expr, s);
- if (imm_expr.X_op != O_big
- && imm_expr.X_op != O_constant)
- insn_error = _("absolute expression required");
- if (HAVE_32BIT_GPRS)
- normalize_constant_expr (&imm_expr);
- s = expr_end;
- continue;
+ break;
+
+ case M_SAA_AB:
+ s = "saa";
+ offbits = 0;
+ fmt = "t,(b)";
+ goto ld_st;
+ case M_SAAD_AB:
+ s = "saad";
+ offbits = 0;
+ fmt = "t,(b)";
+ goto ld_st;
- case 'A':
- my_getSmallExpression (&offset_expr, offset_reloc, s);
- if (offset_expr.X_op == O_register)
- {
- /* Assume that the offset has been elided and that what
- we saw was a base register. The match will fail later
- if that assumption turns out to be wrong. */
- offset_expr.X_op = O_constant;
- offset_expr.X_add_number = 0;
- }
- else
- {
- normalize_address_expr (&offset_expr);
- s = expr_end;
- }
- continue;
+ /* New code added to support COPZ instructions.
+ This code builds table entries out of the macros in mip_opcodes.
+ R4000 uses interlocks to handle coproc delays.
+ Other chips (like the R3000) require nops to be inserted for delays.
- case 'F':
- case 'L':
- case 'f':
- case 'l':
- {
- int f64;
- int using_gprs;
- char *save_in;
- char *err;
- unsigned char temp[8];
- int len;
- unsigned int length;
- segT seg;
- subsegT subseg;
- char *p;
-
- /* These only appear as the last operand in an
- instruction, and every instruction that accepts
- them in any variant accepts them in all variants.
- This means we don't have to worry about backing out
- any changes if the instruction does not match.
-
- The difference between them is the size of the
- floating point constant and where it goes. For 'F'
- and 'L' the constant is 64 bits; for 'f' and 'l' it
- is 32 bits. Where the constant is placed is based
- on how the MIPS assembler does things:
- F -- .rdata
- L -- .lit8
- f -- immediate value
- l -- .lit4
-
- The .lit4 and .lit8 sections are only used if
- permitted by the -G argument.
-
- The code below needs to know whether the target register
- is 32 or 64 bits wide. It relies on the fact 'f' and
- 'F' are used with GPR-based instructions and 'l' and
- 'L' are used with FPR-based instructions. */
-
- f64 = *args == 'F' || *args == 'L';
- using_gprs = *args == 'F' || *args == 'f';
-
- save_in = input_line_pointer;
- input_line_pointer = s;
- err = md_atof (f64 ? 'd' : 'f', (char *) temp, &len);
- length = len;
- s = input_line_pointer;
- input_line_pointer = save_in;
- if (err != NULL && *err != '\0')
- {
- as_bad (_("Bad floating point constant: %s"), err);
- memset (temp, '\0', sizeof temp);
- length = f64 ? 8 : 4;
- }
-
- gas_assert (length == (unsigned) (f64 ? 8 : 4));
-
- if (*args == 'f'
- || (*args == 'l'
- && (g_switch_value < 4
- || (temp[0] == 0 && temp[1] == 0)
- || (temp[2] == 0 && temp[3] == 0))))
- {
- imm_expr.X_op = O_constant;
- if (!target_big_endian)
- imm_expr.X_add_number = bfd_getl32 (temp);
- else
- imm_expr.X_add_number = bfd_getb32 (temp);
- }
- else if (length > 4
- && !mips_disable_float_construction
- /* Constants can only be constructed in GPRs and
- copied to FPRs if the GPRs are at least as wide
- as the FPRs. Force the constant into memory if
- we are using 64-bit FPRs but the GPRs are only
- 32 bits wide. */
- && (using_gprs
- || !(HAVE_64BIT_FPRS && HAVE_32BIT_GPRS))
- && ((temp[0] == 0 && temp[1] == 0)
- || (temp[2] == 0 && temp[3] == 0))
- && ((temp[4] == 0 && temp[5] == 0)
- || (temp[6] == 0 && temp[7] == 0)))
- {
- /* The value is simple enough to load with a couple of
- instructions. If using 32-bit registers, set
- imm_expr to the high order 32 bits and offset_expr to
- the low order 32 bits. Otherwise, set imm_expr to
- the entire 64 bit constant. */
- if (using_gprs ? HAVE_32BIT_GPRS : HAVE_32BIT_FPRS)
- {
- imm_expr.X_op = O_constant;
- offset_expr.X_op = O_constant;
- if (!target_big_endian)
- {
- imm_expr.X_add_number = bfd_getl32 (temp + 4);
- offset_expr.X_add_number = bfd_getl32 (temp);
- }
- else
- {
- imm_expr.X_add_number = bfd_getb32 (temp);
- offset_expr.X_add_number = bfd_getb32 (temp + 4);
- }
- if (offset_expr.X_add_number == 0)
- offset_expr.X_op = O_absent;
- }
- else
- {
- imm_expr.X_op = O_constant;
- if (!target_big_endian)
- imm_expr.X_add_number = bfd_getl64 (temp);
- else
- imm_expr.X_add_number = bfd_getb64 (temp);
- }
- }
- else
- {
- const char *newname;
- segT new_seg;
-
- /* Switch to the right section. */
- seg = now_seg;
- subseg = now_subseg;
- switch (*args)
- {
- default: /* unused default case avoids warnings. */
- case 'L':
- newname = RDATA_SECTION_NAME;
- if (g_switch_value >= 8)
- newname = ".lit8";
- break;
- case 'F':
- newname = RDATA_SECTION_NAME;
- break;
- case 'l':
- gas_assert (g_switch_value >= 4);
- newname = ".lit4";
- break;
- }
- new_seg = subseg_new (newname, (subsegT) 0);
- bfd_set_section_flags (stdoutput, new_seg,
- (SEC_ALLOC
- | SEC_LOAD
- | SEC_READONLY
- | SEC_DATA));
- frag_align (*args == 'l' ? 2 : 3, 0, 0);
- if (strncmp (TARGET_OS, "elf", 3) != 0)
- record_alignment (new_seg, 4);
- else
- record_alignment (new_seg, *args == 'l' ? 2 : 3);
- if (seg == now_seg)
- as_bad (_("Can't use floating point insn in this section"));
-
- /* Set the argument to the current address in the
- section. */
- offset_expr.X_op = O_symbol;
- offset_expr.X_add_symbol = symbol_temp_new_now ();
- offset_expr.X_add_number = 0;
-
- /* Put the floating point number into the section. */
- p = frag_more ((int) length);
- memcpy (p, temp, length);
-
- /* Switch back to the original section. */
- subseg_set (seg, subseg);
- }
- }
- continue;
+ FIXME: Currently, we require that the user handle delays.
+ In order to fill delay slots for non-interlocked chips,
+ we must have a way to specify delays based on the coprocessor.
+ Eg. 4 cycles if load coproc reg from memory, 1 if in cache, etc.
+ What are the side-effects of the cop instruction?
+ What cache support might we have and what are its effects?
+ Both coprocessor & memory require delays. how long???
+ What registers are read/set/modified?
- case 'i': /* 16-bit unsigned immediate. */
- case 'j': /* 16-bit signed immediate. */
- *imm_reloc = BFD_RELOC_LO16;
- if (my_getSmallExpression (&imm_expr, imm_reloc, s) == 0)
- {
- int more;
- offsetT minval, maxval;
-
- more = (insn + 1 < past
- && strcmp (insn->name, insn[1].name) == 0);
-
- /* For compatibility with older assemblers, we accept
- 0x8000-0xffff as signed 16-bit numbers when only
- signed numbers are allowed. */
- if (*args == 'i')
- minval = 0, maxval = 0xffff;
- else if (more)
- minval = -0x8000, maxval = 0x7fff;
- else
- minval = -0x8000, maxval = 0xffff;
+ If an itbl is provided to interpret cop instructions,
+ this knowledge can be encoded in the itbl spec. */
- if (imm_expr.X_op != O_constant
- || imm_expr.X_add_number < minval
- || imm_expr.X_add_number > maxval)
- {
- if (more)
- break;
- if (imm_expr.X_op == O_constant
- || imm_expr.X_op == O_big)
- as_bad (_("Expression out of range"));
- }
- }
- s = expr_end;
- continue;
+ case M_COP0:
+ s = "c0";
+ goto copz;
+ case M_COP1:
+ s = "c1";
+ goto copz;
+ case M_COP2:
+ s = "c2";
+ goto copz;
+ case M_COP3:
+ s = "c3";
+ copz:
+ gas_assert (!mips_opts.micromips);
+ /* For now we just do C (same as Cz). The parameter will be
+ stored in insn_opcode by mips_ip. */
+ macro_build (NULL, s, "C", (int) ip->insn_opcode);
+ break;
- case 'o': /* 16-bit offset. */
- offset_reloc[0] = BFD_RELOC_LO16;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
+ case M_MOVE:
+ move_register (op[0], op[1]);
+ break;
- /* Check whether there is only a single bracketed expression
- left. If so, it must be the base register and the
- constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- {
- offset_expr.X_op = O_constant;
- offset_expr.X_add_number = 0;
- continue;
- }
+ case M_MOVEP:
+ gas_assert (mips_opts.micromips);
+ gas_assert (mips_opts.insn32);
+ move_register (micromips_to_32_reg_h_map1[op[0]],
+ micromips_to_32_reg_m_map[op[1]]);
+ move_register (micromips_to_32_reg_h_map2[op[0]],
+ micromips_to_32_reg_n_map[op[2]]);
+ break;
- /* If this value won't fit into a 16 bit offset, then go
- find a macro that will generate the 32 bit offset
- code pattern. */
- if (my_getSmallExpression (&offset_expr, offset_reloc, s) == 0
- && (offset_expr.X_op != O_constant
- || offset_expr.X_add_number >= 0x8000
- || offset_expr.X_add_number < -0x8000))
- break;
+ case M_DMUL:
+ dbl = 1;
+ case M_MUL:
+ if (mips_opts.arch == CPU_R5900)
+ macro_build (NULL, dbl ? "dmultu" : "multu", "d,s,t", op[0], op[1],
+ op[2]);
+ else
+ {
+ macro_build (NULL, dbl ? "dmultu" : "multu", "s,t", op[1], op[2]);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
+ }
+ break;
- s = expr_end;
- continue;
+ case M_DMUL_I:
+ dbl = 1;
+ case M_MUL_I:
+ /* The MIPS assembler some times generates shifts and adds. I'm
+ not trying to be that fancy. GCC should do this for us
+ anyway. */
+ used_at = 1;
+ load_register (AT, &imm_expr, dbl);
+ macro_build (NULL, dbl ? "dmult" : "mult", "s,t", op[1], AT);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
+ break;
- case 'p': /* PC-relative offset. */
- *offset_reloc = BFD_RELOC_16_PCREL_S2;
- my_getExpression (&offset_expr, s);
- s = expr_end;
- continue;
+ case M_DMULO_I:
+ dbl = 1;
+ case M_MULO_I:
+ imm = 1;
+ goto do_mulo;
- case 'u': /* Upper 16 bits. */
- *imm_reloc = BFD_RELOC_LO16;
- if (my_getSmallExpression (&imm_expr, imm_reloc, s) == 0
- && imm_expr.X_op == O_constant
- && (imm_expr.X_add_number < 0
- || imm_expr.X_add_number >= 0x10000))
- as_bad (_("lui expression (%lu) not in range 0..65535"),
- (unsigned long) imm_expr.X_add_number);
- s = expr_end;
- continue;
+ case M_DMULO:
+ dbl = 1;
+ case M_MULO:
+ do_mulo:
+ start_noreorder ();
+ used_at = 1;
+ if (imm)
+ load_register (AT, &imm_expr, dbl);
+ macro_build (NULL, dbl ? "dmult" : "mult", "s,t",
+ op[1], imm ? AT : op[2]);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
+ macro_build (NULL, dbl ? "dsra32" : "sra", SHFT_FMT, op[0], op[0], 31);
+ macro_build (NULL, "mfhi", MFHL_FMT, AT);
+ if (mips_trap)
+ macro_build (NULL, "tne", TRAP_FMT, op[0], AT, 6);
+ else
+ {
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "beq", "s,t,p", op[0], AT);
+ macro_build (NULL, "nop", "");
+ macro_build (NULL, "break", BRK_FMT, 6);
+ if (mips_opts.micromips)
+ micromips_add_label ();
+ }
+ end_noreorder ();
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
+ break;
- case 'a': /* 26-bit address. */
- jump:
- *offset_reloc = BFD_RELOC_MIPS_JMP;
- my_getExpression (&offset_expr, s);
- s = expr_end;
- continue;
+ case M_DMULOU_I:
+ dbl = 1;
+ case M_MULOU_I:
+ imm = 1;
+ goto do_mulou;
+
+ case M_DMULOU:
+ dbl = 1;
+ case M_MULOU:
+ do_mulou:
+ start_noreorder ();
+ used_at = 1;
+ if (imm)
+ load_register (AT, &imm_expr, dbl);
+ macro_build (NULL, dbl ? "dmultu" : "multu", "s,t",
+ op[1], imm ? AT : op[2]);
+ macro_build (NULL, "mfhi", MFHL_FMT, AT);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
+ if (mips_trap)
+ macro_build (NULL, "tne", TRAP_FMT, AT, ZERO, 6);
+ else
+ {
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "beq", "s,t,p", AT, ZERO);
+ macro_build (NULL, "nop", "");
+ macro_build (NULL, "break", BRK_FMT, 6);
+ if (mips_opts.micromips)
+ micromips_add_label ();
+ }
+ end_noreorder ();
+ break;
- case 'N': /* 3-bit branch condition code. */
- case 'M': /* 3-bit compare condition code. */
- rtype = RTYPE_CCC;
- if (ip->insn_mo->pinfo & (FP_D | FP_S))
- rtype |= RTYPE_FCC;
- if (!reg_lookup (&s, rtype, ®no))
- break;
- if ((strcmp (str + strlen (str) - 3, ".ps") == 0
- || strcmp (str + strlen (str) - 5, "any2f") == 0
- || strcmp (str + strlen (str) - 5, "any2t") == 0)
- && (regno & 1) != 0)
- as_warn (_("Condition code register should be even for %s, "
- "was %d"),
- str, regno);
- if ((strcmp (str + strlen (str) - 5, "any4f") == 0
- || strcmp (str + strlen (str) - 5, "any4t") == 0)
- && (regno & 3) != 0)
- as_warn (_("Condition code register should be 0 or 4 for %s, "
- "was %d"),
- str, regno);
- if (*args == 'N')
- INSERT_OPERAND (mips_opts.micromips, BCC, *ip, regno);
- else
- INSERT_OPERAND (mips_opts.micromips, CCC, *ip, regno);
- continue;
+ case M_DROL:
+ if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
+ {
+ if (op[0] == op[1])
+ {
+ tempreg = AT;
+ used_at = 1;
+ }
+ else
+ tempreg = op[0];
+ macro_build (NULL, "dnegu", "d,w", tempreg, op[2]);
+ macro_build (NULL, "drorv", "d,t,s", op[0], op[1], tempreg);
+ break;
+ }
+ used_at = 1;
+ macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "dsrlv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "dsllv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ break;
- case 'H':
- if (s[0] == '0' && (s[1] == 'x' || s[1] == 'X'))
- s += 2;
- if (ISDIGIT (*s))
- {
- c = 0;
- do
- {
- c *= 10;
- c += *s - '0';
- ++s;
- }
- while (ISDIGIT (*s));
- }
- else
- c = 8; /* Invalid sel value. */
+ case M_ROL:
+ if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
+ {
+ if (op[0] == op[1])
+ {
+ tempreg = AT;
+ used_at = 1;
+ }
+ else
+ tempreg = op[0];
+ macro_build (NULL, "negu", "d,w", tempreg, op[2]);
+ macro_build (NULL, "rorv", "d,t,s", op[0], op[1], tempreg);
+ break;
+ }
+ used_at = 1;
+ macro_build (NULL, "subu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "srlv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "sllv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ break;
- if (c > 7)
- as_bad (_("Invalid coprocessor sub-selection value (0-7)"));
- INSERT_OPERAND (mips_opts.micromips, SEL, *ip, c);
- continue;
+ case M_DROL_I:
+ {
+ unsigned int rot;
+ char *l;
+ char *rr;
- case 'e':
- gas_assert (!mips_opts.micromips);
- /* Must be at least one digit. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
+ rot = imm_expr.X_add_number & 0x3f;
+ if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
+ {
+ rot = (64 - rot) & 0x3f;
+ if (rot >= 32)
+ macro_build (NULL, "dror32", SHFT_FMT, op[0], op[1], rot - 32);
+ else
+ macro_build (NULL, "dror", SHFT_FMT, op[0], op[1], rot);
+ break;
+ }
+ if (rot == 0)
+ {
+ macro_build (NULL, "dsrl", SHFT_FMT, op[0], op[1], 0);
+ break;
+ }
+ l = (rot < 0x20) ? "dsll" : "dsll32";
+ rr = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32";
+ rot &= 0x1f;
+ used_at = 1;
+ macro_build (NULL, l, SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, rr, SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ }
+ break;
- if ((unsigned long) imm_expr.X_add_number
- > (unsigned long) OP_MASK_VECBYTE)
- {
- as_bad (_("bad byte vector index (%ld)"),
- (long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
- }
+ case M_ROL_I:
+ {
+ unsigned int rot;
- INSERT_OPERAND (0, VECBYTE, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ rot = imm_expr.X_add_number & 0x1f;
+ if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
+ {
+ macro_build (NULL, "ror", SHFT_FMT, op[0], op[1],
+ (32 - rot) & 0x1f);
+ break;
+ }
+ if (rot == 0)
+ {
+ macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], 0);
+ break;
+ }
+ used_at = 1;
+ macro_build (NULL, "sll", SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ }
+ break;
- case '%':
- gas_assert (!mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
+ case M_DROR:
+ if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
+ {
+ macro_build (NULL, "drorv", "d,t,s", op[0], op[1], op[2]);
+ break;
+ }
+ used_at = 1;
+ macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "dsllv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "dsrlv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ break;
- if ((unsigned long) imm_expr.X_add_number
- > (unsigned long) OP_MASK_VECALIGN)
- {
- as_bad (_("bad byte vector index (%ld)"),
- (long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
- }
+ case M_ROR:
+ if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
+ {
+ macro_build (NULL, "rorv", "d,t,s", op[0], op[1], op[2]);
+ break;
+ }
+ used_at = 1;
+ macro_build (NULL, "subu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "sllv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "srlv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ break;
- INSERT_OPERAND (0, VECALIGN, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ case M_DROR_I:
+ {
+ unsigned int rot;
+ char *l;
+ char *rr;
- case 'm': /* Opcode extension character. */
- gas_assert (mips_opts.micromips);
- c = *++args;
- switch (c)
- {
- case 'r':
- if (strncmp (s, "$pc", 3) == 0)
- {
- s += 3;
- continue;
- }
- break;
+ rot = imm_expr.X_add_number & 0x3f;
+ if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
+ {
+ if (rot >= 32)
+ macro_build (NULL, "dror32", SHFT_FMT, op[0], op[1], rot - 32);
+ else
+ macro_build (NULL, "dror", SHFT_FMT, op[0], op[1], rot);
+ break;
+ }
+ if (rot == 0)
+ {
+ macro_build (NULL, "dsrl", SHFT_FMT, op[0], op[1], 0);
+ break;
+ }
+ rr = (rot < 0x20) ? "dsrl" : "dsrl32";
+ l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32";
+ rot &= 0x1f;
+ used_at = 1;
+ macro_build (NULL, rr, SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, l, SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ }
+ break;
- case 'a':
- case 'b':
- case 'c':
- case 'd':
- case 'e':
- case 'f':
- case 'g':
- case 'h':
- case 'j':
- case 'l':
- case 'm':
- case 'n':
- case 'p':
- case 'q':
- case 's':
- case 't':
- case 'x':
- case 'y':
- case 'z':
- s_reset = s;
- ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no);
- if (regno == AT && mips_opts.at)
- {
- if (mips_opts.at == ATREG)
- as_warn (_("Used $at without \".set noat\""));
- else
- as_warn (_("Used $%u with \".set at=$%u\""),
- regno, mips_opts.at);
- }
- if (!ok)
- {
- if (c == 'c')
- {
- gas_assert (args[1] == ',');
- regno = lastregno;
- ++args;
- }
- else if (c == 't')
- {
- gas_assert (args[1] == ',');
- ++args;
- continue; /* Nothing to do. */
- }
- else
- break;
- }
+ case M_ROR_I:
+ {
+ unsigned int rot;
- if (c == 'j' && !strncmp (ip->insn_mo->name, "jalr", 4))
- {
- if (regno == lastregno)
- {
- insn_error
- = _("Source and destination must be different");
- continue;
- }
- if (regno == 31 && lastregno == 0xffffffff)
- {
- insn_error
- = _("A destination register must be supplied");
- continue;
- }
- }
+ rot = imm_expr.X_add_number & 0x1f;
+ if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
+ {
+ macro_build (NULL, "ror", SHFT_FMT, op[0], op[1], rot);
+ break;
+ }
+ if (rot == 0)
+ {
+ macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], 0);
+ break;
+ }
+ used_at = 1;
+ macro_build (NULL, "srl", SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, "sll", SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ }
+ break;
- if (*s == ' ')
- ++s;
- if (args[1] != *s)
- {
- if (c == 'e')
- {
- gas_assert (args[1] == ',');
- regno = lastregno;
- s = s_reset;
- ++args;
- }
- else if (c == 't')
- {
- gas_assert (args[1] == ',');
- s = s_reset;
- ++args;
- continue; /* Nothing to do. */
- }
- }
+ case M_SEQ:
+ if (op[1] == 0)
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[2], BFD_RELOC_LO16);
+ else if (op[2] == 0)
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[1], BFD_RELOC_LO16);
+ else
+ {
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], op[2]);
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[0], BFD_RELOC_LO16);
+ }
+ break;
- /* Make sure regno is the same as lastregno. */
- if (c == 't' && regno != lastregno)
- break;
+ case M_SEQ_I:
+ if (imm_expr.X_add_number == 0)
+ {
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[1], BFD_RELOC_LO16);
+ break;
+ }
+ if (op[1] == 0)
+ {
+ as_warn (_("instruction %s: result is always false"),
+ ip->insn_mo->name);
+ move_register (op[0], 0);
+ break;
+ }
+ if (CPU_HAS_SEQ (mips_opts.arch)
+ && -512 <= imm_expr.X_add_number
+ && imm_expr.X_add_number < 512)
+ {
+ macro_build (NULL, "seqi", "t,r,+Q", op[0], op[1],
+ (int) imm_expr.X_add_number);
+ break;
+ }
+ if (imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
+ macro_build (&imm_expr, "xori", "t,r,i", op[0], op[1], BFD_RELOC_LO16);
+ else if (imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number < 0)
+ {
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu",
+ "t,r,j", op[0], op[1], BFD_RELOC_LO16);
+ }
+ else if (CPU_HAS_SEQ (mips_opts.arch))
+ {
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, "seq", "d,v,t", op[0], op[1], AT);
+ break;
+ }
+ else
+ {
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], AT);
+ used_at = 1;
+ }
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[0], BFD_RELOC_LO16);
+ break;
- /* Make sure regno is the same as destregno. */
- if (c == 'x' && regno != destregno)
- break;
+ case M_SGE: /* X >= Y <==> not (X < Y) */
+ s = "slt";
+ goto sge;
+ case M_SGEU:
+ s = "sltu";
+ sge:
+ macro_build (NULL, s, "d,v,t", op[0], op[1], op[2]);
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
+ break;
+
+ case M_SGE_I: /* X >= I <==> not (X < I) */
+ case M_SGEU_I:
+ if (imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
+ macro_build (&imm_expr, mask == M_SGE_I ? "slti" : "sltiu", "t,r,j",
+ op[0], op[1], BFD_RELOC_LO16);
+ else
+ {
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, mask == M_SGE_I ? "slt" : "sltu", "d,v,t",
+ op[0], op[1], AT);
+ used_at = 1;
+ }
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
+ break;
- /* We need to save regno, before regno maps to the
- microMIPS register encoding. */
- lastregno = regno;
+ case M_SGT: /* X > Y <==> Y < X */
+ s = "slt";
+ goto sgt;
+ case M_SGTU:
+ s = "sltu";
+ sgt:
+ macro_build (NULL, s, "d,v,t", op[0], op[2], op[1]);
+ break;
- if (c == 'f')
- destregno = regno;
+ case M_SGT_I: /* X > I <==> I < X */
+ s = "slt";
+ goto sgti;
+ case M_SGTU_I:
+ s = "sltu";
+ sgti:
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, s, "d,v,t", op[0], AT, op[1]);
+ break;
- switch (c)
- {
- case 'a':
- if (regno != GP)
- regno = ILLEGAL_REG;
- break;
-
- case 'b':
- regno = mips32_to_micromips_reg_b_map[regno];
- break;
-
- case 'c':
- regno = mips32_to_micromips_reg_c_map[regno];
- break;
-
- case 'd':
- regno = mips32_to_micromips_reg_d_map[regno];
- break;
-
- case 'e':
- regno = mips32_to_micromips_reg_e_map[regno];
- break;
-
- case 'f':
- regno = mips32_to_micromips_reg_f_map[regno];
- break;
-
- case 'g':
- regno = mips32_to_micromips_reg_g_map[regno];
- break;
-
- case 'h':
- s += strspn (s, " \t");
- if (*s != ',')
- {
- regno = ILLEGAL_REG;
- break;
- }
- ++s;
- s += strspn (s, " \t");
- ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no2);
- if (!ok)
- {
- regno = ILLEGAL_REG;
- break;
- }
- if (regno2 == AT && mips_opts.at)
- {
- if (mips_opts.at == ATREG)
- as_warn (_("Used $at without \".set noat\""));
- else
- as_warn (_("Used $%u with \".set at=$%u\""),
- regno2, mips_opts.at);
- }
- regno = (mips_lookup_reg_pair
- (regno, regno2,
- micromips_to_32_reg_h_map1,
- micromips_to_32_reg_h_map2, 8));
- break;
-
- case 'l':
- regno = mips32_to_micromips_reg_l_map[regno];
- break;
-
- case 'm':
- regno = mips32_to_micromips_reg_m_map[regno];
- break;
-
- case 'n':
- regno = mips32_to_micromips_reg_n_map[regno];
- break;
-
- case 'q':
- regno = mips32_to_micromips_reg_q_map[regno];
- break;
-
- case 's':
- if (regno != SP)
- regno = ILLEGAL_REG;
- break;
-
- case 'y':
- if (regno != 31)
- regno = ILLEGAL_REG;
- break;
-
- case 'z':
- if (regno != ZERO)
- regno = ILLEGAL_REG;
- break;
-
- case 'j': /* Do nothing. */
- case 'p':
- case 't':
- case 'x':
- break;
-
- default:
- abort ();
- }
+ case M_SLE: /* X <= Y <==> Y >= X <==> not (Y < X) */
+ s = "slt";
+ goto sle;
+ case M_SLEU:
+ s = "sltu";
+ sle:
+ macro_build (NULL, s, "d,v,t", op[0], op[2], op[1]);
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
+ break;
- if (regno == ILLEGAL_REG)
- break;
+ case M_SLE_I: /* X <= I <==> I >= X <==> not (I < X) */
+ s = "slt";
+ goto slei;
+ case M_SLEU_I:
+ s = "sltu";
+ slei:
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, s, "d,v,t", op[0], AT, op[1]);
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
+ break;
- switch (c)
- {
- case 'b':
- INSERT_OPERAND (1, MB, *ip, regno);
- break;
-
- case 'c':
- INSERT_OPERAND (1, MC, *ip, regno);
- break;
-
- case 'd':
- INSERT_OPERAND (1, MD, *ip, regno);
- break;
-
- case 'e':
- INSERT_OPERAND (1, ME, *ip, regno);
- break;
-
- case 'f':
- INSERT_OPERAND (1, MF, *ip, regno);
- break;
-
- case 'g':
- INSERT_OPERAND (1, MG, *ip, regno);
- break;
-
- case 'h':
- INSERT_OPERAND (1, MH, *ip, regno);
- break;
-
- case 'j':
- INSERT_OPERAND (1, MJ, *ip, regno);
- break;
-
- case 'l':
- INSERT_OPERAND (1, ML, *ip, regno);
- break;
-
- case 'm':
- INSERT_OPERAND (1, MM, *ip, regno);
- break;
-
- case 'n':
- INSERT_OPERAND (1, MN, *ip, regno);
- break;
-
- case 'p':
- INSERT_OPERAND (1, MP, *ip, regno);
- break;
-
- case 'q':
- INSERT_OPERAND (1, MQ, *ip, regno);
- break;
-
- case 'a': /* Do nothing. */
- case 's': /* Do nothing. */
- case 't': /* Do nothing. */
- case 'x': /* Do nothing. */
- case 'y': /* Do nothing. */
- case 'z': /* Do nothing. */
- break;
-
- default:
- abort ();
- }
- continue;
+ case M_SLT_I:
+ if (imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
+ {
+ macro_build (&imm_expr, "slti", "t,r,j", op[0], op[1],
+ BFD_RELOC_LO16);
+ break;
+ }
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, "slt", "d,v,t", op[0], op[1], AT);
+ break;
- case 'A':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- /* Check whether there is only a single bracketed
- expression left. If so, it must be the base register
- and the constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- {
- INSERT_OPERAND (1, IMMA, *ip, 0);
- continue;
- }
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, -64, 64, 2))
- break;
-
- imm = ep.X_add_number >> 2;
- INSERT_OPERAND (1, IMMA, *ip, imm);
- }
- s = expr_end;
- continue;
+ case M_SLTU_I:
+ if (imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
+ {
+ macro_build (&imm_expr, "sltiu", "t,r,j", op[0], op[1],
+ BFD_RELOC_LO16);
+ break;
+ }
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, "sltu", "d,v,t", op[0], op[1], AT);
+ break;
- case 'B':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || ep.X_op != O_constant)
- break;
-
- for (imm = 0; imm < 8; imm++)
- if (micromips_imm_b_map[imm] == ep.X_add_number)
- break;
- if (imm >= 8)
- break;
-
- INSERT_OPERAND (1, IMMB, *ip, imm);
- }
- s = expr_end;
- continue;
+ case M_SNE:
+ if (op[1] == 0)
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[2]);
+ else if (op[2] == 0)
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[1]);
+ else
+ {
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], op[2]);
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[0]);
+ }
+ break;
- case 'C':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || ep.X_op != O_constant)
- break;
-
- for (imm = 0; imm < 16; imm++)
- if (micromips_imm_c_map[imm] == ep.X_add_number)
- break;
- if (imm >= 16)
- break;
-
- INSERT_OPERAND (1, IMMC, *ip, imm);
- }
- s = expr_end;
- continue;
+ case M_SNE_I:
+ if (imm_expr.X_add_number == 0)
+ {
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[1]);
+ break;
+ }
+ if (op[1] == 0)
+ {
+ as_warn (_("instruction %s: result is always true"),
+ ip->insn_mo->name);
+ macro_build (&expr1, HAVE_32BIT_GPRS ? "addiu" : "daddiu", "t,r,j",
+ op[0], 0, BFD_RELOC_LO16);
+ break;
+ }
+ if (CPU_HAS_SEQ (mips_opts.arch)
+ && -512 <= imm_expr.X_add_number
+ && imm_expr.X_add_number < 512)
+ {
+ macro_build (NULL, "snei", "t,r,+Q", op[0], op[1],
+ (int) imm_expr.X_add_number);
+ break;
+ }
+ if (imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
+ {
+ macro_build (&imm_expr, "xori", "t,r,i", op[0], op[1],
+ BFD_RELOC_LO16);
+ }
+ else if (imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number < 0)
+ {
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu",
+ "t,r,j", op[0], op[1], BFD_RELOC_LO16);
+ }
+ else if (CPU_HAS_SEQ (mips_opts.arch))
+ {
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, "sne", "d,v,t", op[0], op[1], AT);
+ break;
+ }
+ else
+ {
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], AT);
+ used_at = 1;
+ }
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[0]);
+ break;
- case 'D': /* pc relative offset */
- case 'E': /* pc relative offset */
- my_getExpression (&offset_expr, s);
- if (offset_expr.X_op == O_register)
- break;
+ case M_SUB_I:
+ s = "addi";
+ s2 = "sub";
+ goto do_subi;
+ case M_SUBU_I:
+ s = "addiu";
+ s2 = "subu";
+ goto do_subi;
+ case M_DSUB_I:
+ dbl = 1;
+ s = "daddi";
+ s2 = "dsub";
+ if (!mips_opts.micromips)
+ goto do_subi;
+ if (imm_expr.X_add_number > -0x200
+ && imm_expr.X_add_number <= 0x200)
+ {
+ macro_build (NULL, s, "t,r,.", op[0], op[1],
+ (int) -imm_expr.X_add_number);
+ break;
+ }
+ goto do_subi_i;
+ case M_DSUBU_I:
+ dbl = 1;
+ s = "daddiu";
+ s2 = "dsubu";
+ do_subi:
+ if (imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number <= 0x8000)
+ {
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build (&imm_expr, s, "t,r,j", op[0], op[1], BFD_RELOC_LO16);
+ break;
+ }
+ do_subi_i:
+ used_at = 1;
+ load_register (AT, &imm_expr, dbl);
+ macro_build (NULL, s2, "d,v,t", op[0], op[1], AT);
+ break;
- if (!forced_insn_length)
- *offset_reloc = (int) BFD_RELOC_UNUSED + c;
- else if (c == 'D')
- *offset_reloc = BFD_RELOC_MICROMIPS_10_PCREL_S1;
- else
- *offset_reloc = BFD_RELOC_MICROMIPS_7_PCREL_S1;
- s = expr_end;
- continue;
+ case M_TEQ_I:
+ s = "teq";
+ goto trap;
+ case M_TGE_I:
+ s = "tge";
+ goto trap;
+ case M_TGEU_I:
+ s = "tgeu";
+ goto trap;
+ case M_TLT_I:
+ s = "tlt";
+ goto trap;
+ case M_TLTU_I:
+ s = "tltu";
+ goto trap;
+ case M_TNE_I:
+ s = "tne";
+ trap:
+ used_at = 1;
+ load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
+ macro_build (NULL, s, "s,t", op[0], AT);
+ break;
- case 'F':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ case M_TRUNCWS:
+ case M_TRUNCWD:
+ gas_assert (!mips_opts.micromips);
+ gas_assert (mips_opts.isa == ISA_MIPS1);
+ used_at = 1;
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 16, 0))
- break;
+ /*
+ * Is the double cfc1 instruction a bug in the mips assembler;
+ * or is there a reason for it?
+ */
+ start_noreorder ();
+ macro_build (NULL, "cfc1", "t,G", op[2], RA);
+ macro_build (NULL, "cfc1", "t,G", op[2], RA);
+ macro_build (NULL, "nop", "");
+ expr1.X_add_number = 3;
+ macro_build (&expr1, "ori", "t,r,i", AT, op[2], BFD_RELOC_LO16);
+ expr1.X_add_number = 2;
+ macro_build (&expr1, "xori", "t,r,i", AT, AT, BFD_RELOC_LO16);
+ macro_build (NULL, "ctc1", "t,G", AT, RA);
+ macro_build (NULL, "nop", "");
+ macro_build (NULL, mask == M_TRUNCWD ? "cvt.w.d" : "cvt.w.s", "D,S",
+ op[0], op[1]);
+ macro_build (NULL, "ctc1", "t,G", op[2], RA);
+ macro_build (NULL, "nop", "");
+ end_noreorder ();
+ break;
- imm = ep.X_add_number;
- INSERT_OPERAND (1, IMMF, *ip, imm);
- }
- s = expr_end;
- continue;
+ case M_ULH_AB:
+ s = "lb";
+ s2 = "lbu";
+ off = 1;
+ goto uld_st;
+ case M_ULHU_AB:
+ s = "lbu";
+ s2 = "lbu";
+ off = 1;
+ goto uld_st;
+ case M_ULW_AB:
+ s = "lwl";
+ s2 = "lwr";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ off = 3;
+ goto uld_st;
+ case M_ULD_AB:
+ s = "ldl";
+ s2 = "ldr";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ off = 7;
+ goto uld_st;
+ case M_USH_AB:
+ s = "sb";
+ s2 = "sb";
+ off = 1;
+ ust = 1;
+ goto uld_st;
+ case M_USW_AB:
+ s = "swl";
+ s2 = "swr";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ off = 3;
+ ust = 1;
+ goto uld_st;
+ case M_USD_AB:
+ s = "sdl";
+ s2 = "sdr";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ off = 7;
+ ust = 1;
- case 'G':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- /* Check whether there is only a single bracketed
- expression left. If so, it must be the base register
- and the constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- {
- INSERT_OPERAND (1, IMMG, *ip, 0);
- continue;
- }
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, -1, 15, 0))
- break;
-
- imm = ep.X_add_number & 15;
- INSERT_OPERAND (1, IMMG, *ip, imm);
- }
- s = expr_end;
- continue;
+ uld_st:
+ breg = op[2];
+ large_offset = !small_offset_p (off, align, offbits);
+ ep = &offset_expr;
+ expr1.X_add_number = 0;
+ if (large_offset)
+ {
+ used_at = 1;
+ tempreg = AT;
+ if (small_offset_p (0, align, 16))
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", tempreg, breg, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2]);
+ else
+ {
+ load_address (tempreg, ep, &used_at);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ }
+ offset_reloc[0] = BFD_RELOC_LO16;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
+ breg = tempreg;
+ tempreg = op[0];
+ ep = &expr1;
+ }
+ else if (!ust && op[0] == breg)
+ {
+ used_at = 1;
+ tempreg = AT;
+ }
+ else
+ tempreg = op[0];
- case 'H':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- /* Check whether there is only a single bracketed
- expression left. If so, it must be the base register
- and the constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- {
- INSERT_OPERAND (1, IMMH, *ip, 0);
- continue;
- }
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 16, 1))
- break;
-
- imm = ep.X_add_number >> 1;
- INSERT_OPERAND (1, IMMH, *ip, imm);
- }
- s = expr_end;
- continue;
+ if (off == 1)
+ goto ulh_sh;
- case 'I':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ if (!target_big_endian)
+ ep->X_add_number += off;
+ if (offbits == 12)
+ macro_build (NULL, s, "t,~(b)", tempreg, (int) ep->X_add_number, breg);
+ else
+ macro_build (ep, s, "t,o(b)", tempreg, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, -1, 127, 0))
- break;
+ if (!target_big_endian)
+ ep->X_add_number -= off;
+ else
+ ep->X_add_number += off;
+ if (offbits == 12)
+ macro_build (NULL, s2, "t,~(b)",
+ tempreg, (int) ep->X_add_number, breg);
+ else
+ macro_build (ep, s2, "t,o(b)", tempreg, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
- imm = ep.X_add_number & 127;
- INSERT_OPERAND (1, IMMI, *ip, imm);
- }
- s = expr_end;
- continue;
+ /* If necessary, move the result in tempreg to the final destination. */
+ if (!ust && op[0] != tempreg)
+ {
+ /* Protect second load's delay slot. */
+ load_delay_nop ();
+ move_register (op[0], tempreg);
+ }
+ break;
- case 'J':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- /* Check whether there is only a single bracketed
- expression left. If so, it must be the base register
- and the constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- {
- INSERT_OPERAND (1, IMMJ, *ip, 0);
- continue;
- }
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 16, 2))
- break;
-
- imm = ep.X_add_number >> 2;
- INSERT_OPERAND (1, IMMJ, *ip, imm);
- }
- s = expr_end;
- continue;
+ ulh_sh:
+ used_at = 1;
+ if (target_big_endian == ust)
+ ep->X_add_number += off;
+ tempreg = ust || large_offset ? op[0] : AT;
+ macro_build (ep, s, "t,o(b)", tempreg, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
- case 'L':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- /* Check whether there is only a single bracketed
- expression left. If so, it must be the base register
- and the constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- {
- INSERT_OPERAND (1, IMML, *ip, 0);
- continue;
- }
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 16, 0))
- break;
-
- imm = ep.X_add_number;
- INSERT_OPERAND (1, IMML, *ip, imm);
- }
- s = expr_end;
- continue;
+ /* For halfword transfers we need a temporary register to shuffle
+ bytes. Unfortunately for M_USH_A we have none available before
+ the next store as AT holds the base address. We deal with this
+ case by clobbering TREG and then restoring it as with ULH. */
+ tempreg = ust == large_offset ? op[0] : AT;
+ if (ust)
+ macro_build (NULL, "srl", SHFT_FMT, tempreg, op[0], 8);
- case 'M':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ if (target_big_endian == ust)
+ ep->X_add_number -= off;
+ else
+ ep->X_add_number += off;
+ macro_build (ep, s2, "t,o(b)", tempreg, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 1, 9, 0))
- break;
+ /* For M_USH_A re-retrieve the LSB. */
+ if (ust && large_offset)
+ {
+ if (target_big_endian)
+ ep->X_add_number += off;
+ else
+ ep->X_add_number -= off;
+ macro_build (&expr1, "lbu", "t,o(b)", AT, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2], AT);
+ }
+ /* For ULH and M_USH_A OR the LSB in. */
+ if (!ust || large_offset)
+ {
+ tempreg = !large_offset ? AT : op[0];
+ macro_build (NULL, "sll", SHFT_FMT, tempreg, tempreg, 8);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
+ }
+ break;
- imm = ep.X_add_number & 7;
- INSERT_OPERAND (1, IMMM, *ip, imm);
- }
- s = expr_end;
- continue;
+ default:
+ /* FIXME: Check if this is one of the itbl macros, since they
+ are added dynamically. */
+ as_bad (_("macro %s not implemented yet"), ip->insn_mo->name);
+ break;
+ }
+ if (!mips_opts.at && used_at)
+ as_bad (_("macro used $at after \".set noat\""));
+}
- case 'N': /* Register list for lwm and swm. */
- {
- /* A comma-separated list of registers and/or
- dash-separated contiguous ranges including
- both ra and a set of one or more registers
- starting at s0 up to s3 which have to be
- consecutive, e.g.:
+/* Implement macros in mips16 mode. */
- s0, ra
- s0, s1, ra, s2, s3
- s0-s2, ra
+static void
+mips16_macro (struct mips_cl_insn *ip)
+{
+ const struct mips_operand_array *operands;
+ int mask;
+ int tmp;
+ expressionS expr1;
+ int dbl;
+ const char *s, *s2, *s3;
+ unsigned int op[MAX_OPERANDS];
+ unsigned int i;
- and any permutations of these. */
- unsigned int reglist;
- int imm;
+ mask = ip->insn_mo->mask;
- if (!reglist_lookup (&s, RTYPE_NUM | RTYPE_GP, ®list))
- break;
+ operands = insn_operands (ip);
+ for (i = 0; i < MAX_OPERANDS; i++)
+ if (operands->operand[i])
+ op[i] = insn_extract_operand (ip, operands->operand[i]);
+ else
+ op[i] = -1;
- if ((reglist & 0xfff1ffff) != 0x80010000)
- break;
+ expr1.X_op = O_constant;
+ expr1.X_op_symbol = NULL;
+ expr1.X_add_symbol = NULL;
+ expr1.X_add_number = 1;
- reglist = (reglist >> 17) & 7;
- reglist += 1;
- if ((reglist & -reglist) != reglist)
- break;
+ dbl = 0;
- imm = ffs (reglist) - 1;
- INSERT_OPERAND (1, IMMN, *ip, imm);
- }
- continue;
+ switch (mask)
+ {
+ default:
+ abort ();
- case 'O': /* sdbbp 4-bit code. */
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ case M_DDIV_3:
+ dbl = 1;
+ case M_DIV_3:
+ s = "mflo";
+ goto do_div3;
+ case M_DREM_3:
+ dbl = 1;
+ case M_REM_3:
+ s = "mfhi";
+ do_div3:
+ start_noreorder ();
+ macro_build (NULL, dbl ? "ddiv" : "div", "0,x,y", op[1], op[2]);
+ expr1.X_add_number = 2;
+ macro_build (&expr1, "bnez", "x,p", op[2]);
+ macro_build (NULL, "break", "6", 7);
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 16, 0))
- break;
+ /* FIXME: The normal code checks for of -1 / -0x80000000 here,
+ since that causes an overflow. We should do that as well,
+ but I don't see how to do the comparisons without a temporary
+ register. */
+ end_noreorder ();
+ macro_build (NULL, s, "x", op[0]);
+ break;
- imm = ep.X_add_number;
- INSERT_OPERAND (1, IMMO, *ip, imm);
- }
- s = expr_end;
- continue;
+ case M_DIVU_3:
+ s = "divu";
+ s2 = "mflo";
+ goto do_divu3;
+ case M_REMU_3:
+ s = "divu";
+ s2 = "mfhi";
+ goto do_divu3;
+ case M_DDIVU_3:
+ s = "ddivu";
+ s2 = "mflo";
+ goto do_divu3;
+ case M_DREMU_3:
+ s = "ddivu";
+ s2 = "mfhi";
+ do_divu3:
+ start_noreorder ();
+ macro_build (NULL, s, "0,x,y", op[1], op[2]);
+ expr1.X_add_number = 2;
+ macro_build (&expr1, "bnez", "x,p", op[2]);
+ macro_build (NULL, "break", "6", 7);
+ end_noreorder ();
+ macro_build (NULL, s2, "x", op[0]);
+ break;
- case 'P':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ case M_DMUL:
+ dbl = 1;
+ case M_MUL:
+ macro_build (NULL, dbl ? "dmultu" : "multu", "x,y", op[1], op[2]);
+ macro_build (NULL, "mflo", "x", op[0]);
+ break;
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 32, 2))
- break;
+ case M_DSUBU_I:
+ dbl = 1;
+ goto do_subu;
+ case M_SUBU_I:
+ do_subu:
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "y,x,4", op[0], op[1]);
+ break;
- imm = ep.X_add_number >> 2;
- INSERT_OPERAND (1, IMMP, *ip, imm);
- }
- s = expr_end;
- continue;
+ case M_SUBU_I_2:
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build (&imm_expr, "addiu", "x,k", op[0]);
+ break;
- case 'Q':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ case M_DSUBU_I_2:
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build (&imm_expr, "daddiu", "y,j", op[0]);
+ break;
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, -0x400000, 0x400000, 2))
- break;
+ case M_BEQ:
+ s = "cmp";
+ s2 = "bteqz";
+ goto do_branch;
+ case M_BNE:
+ s = "cmp";
+ s2 = "btnez";
+ goto do_branch;
+ case M_BLT:
+ s = "slt";
+ s2 = "btnez";
+ goto do_branch;
+ case M_BLTU:
+ s = "sltu";
+ s2 = "btnez";
+ goto do_branch;
+ case M_BLE:
+ s = "slt";
+ s2 = "bteqz";
+ goto do_reverse_branch;
+ case M_BLEU:
+ s = "sltu";
+ s2 = "bteqz";
+ goto do_reverse_branch;
+ case M_BGE:
+ s = "slt";
+ s2 = "bteqz";
+ goto do_branch;
+ case M_BGEU:
+ s = "sltu";
+ s2 = "bteqz";
+ goto do_branch;
+ case M_BGT:
+ s = "slt";
+ s2 = "btnez";
+ goto do_reverse_branch;
+ case M_BGTU:
+ s = "sltu";
+ s2 = "btnez";
- imm = ep.X_add_number >> 2;
- INSERT_OPERAND (1, IMMQ, *ip, imm);
- }
- s = expr_end;
- continue;
+ do_reverse_branch:
+ tmp = op[1];
+ op[1] = op[0];
+ op[0] = tmp;
- case 'U':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- /* Check whether there is only a single bracketed
- expression left. If so, it must be the base register
- and the constant must be zero. */
- if (*s == '(' && strchr (s + 1, '(') == 0)
- {
- INSERT_OPERAND (1, IMMU, *ip, 0);
- continue;
- }
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 32, 2))
- break;
-
- imm = ep.X_add_number >> 2;
- INSERT_OPERAND (1, IMMU, *ip, imm);
- }
- s = expr_end;
- continue;
+ do_branch:
+ macro_build (NULL, s, "x,y", op[0], op[1]);
+ macro_build (&offset_expr, s2, "p");
+ break;
- case 'W':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ case M_BEQ_I:
+ s = "cmpi";
+ s2 = "bteqz";
+ s3 = "x,U";
+ goto do_branch_i;
+ case M_BNE_I:
+ s = "cmpi";
+ s2 = "btnez";
+ s3 = "x,U";
+ goto do_branch_i;
+ case M_BLT_I:
+ s = "slti";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BLTU_I:
+ s = "sltiu";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BLE_I:
+ s = "slti";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_addone_branch_i;
+ case M_BLEU_I:
+ s = "sltiu";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_addone_branch_i;
+ case M_BGE_I:
+ s = "slti";
+ s2 = "bteqz";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BGEU_I:
+ s = "sltiu";
+ s2 = "bteqz";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BGT_I:
+ s = "slti";
+ s2 = "bteqz";
+ s3 = "x,8";
+ goto do_addone_branch_i;
+ case M_BGTU_I:
+ s = "sltiu";
+ s2 = "bteqz";
+ s3 = "x,8";
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 64, 2))
- break;
+ do_addone_branch_i:
+ ++imm_expr.X_add_number;
- imm = ep.X_add_number >> 2;
- INSERT_OPERAND (1, IMMW, *ip, imm);
- }
- s = expr_end;
- continue;
+ do_branch_i:
+ macro_build (&imm_expr, s, s3, op[0]);
+ macro_build (&offset_expr, s2, "p");
+ break;
- case 'X':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
+ case M_ABS:
+ expr1.X_add_number = 0;
+ macro_build (&expr1, "slti", "x,8", op[1]);
+ if (op[0] != op[1])
+ macro_build (NULL, "move", "y,X", op[0], mips16_to_32_reg_map[op[1]]);
+ expr1.X_add_number = 2;
+ macro_build (&expr1, "bteqz", "p");
+ macro_build (NULL, "neg", "x,w", op[0], op[0]);
+ break;
+ }
+}
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, -8, 8, 0))
- break;
+/* Look up instruction [START, START + LENGTH) in HASH. Record any extra
+ opcode bits in *OPCODE_EXTRA. */
- imm = ep.X_add_number;
- INSERT_OPERAND (1, IMMX, *ip, imm);
- }
- s = expr_end;
- continue;
+static struct mips_opcode *
+mips_lookup_insn (struct hash_control *hash, const char *start,
+ ssize_t length, unsigned int *opcode_extra)
+{
+ char *name, *dot, *p;
+ unsigned int mask, suffix;
+ ssize_t opend;
+ struct mips_opcode *insn;
- case 'Y':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
- int imm;
-
- if (my_getSmallExpression (&ep, r, s) > 0
- || expr_const_in_range (&ep, -2, 2, 2)
- || !expr_const_in_range (&ep, -258, 258, 2))
- break;
-
- imm = ep.X_add_number >> 2;
- imm = ((imm >> 1) & ~0xff) | (imm & 0xff);
- INSERT_OPERAND (1, IMMY, *ip, imm);
- }
- s = expr_end;
- continue;
+ /* Make a copy of the instruction so that we can fiddle with it. */
+ name = alloca (length + 1);
+ memcpy (name, start, length);
+ name[length] = '\0';
- case 'Z':
- {
- bfd_reloc_code_real_type r[3];
- expressionS ep;
+ /* Look up the instruction as-is. */
+ insn = (struct mips_opcode *) hash_find (hash, name);
+ if (insn)
+ return insn;
- if (my_getSmallExpression (&ep, r, s) > 0
- || !expr_const_in_range (&ep, 0, 1, 0))
- break;
- }
- s = expr_end;
- continue;
+ dot = strchr (name, '.');
+ if (dot && dot[1])
+ {
+ /* Try to interpret the text after the dot as a VU0 channel suffix. */
+ p = mips_parse_vu0_channels (dot + 1, &mask);
+ if (*p == 0 && mask != 0)
+ {
+ *dot = 0;
+ insn = (struct mips_opcode *) hash_find (hash, name);
+ *dot = '.';
+ if (insn && (insn->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) != 0)
+ {
+ *opcode_extra |= mask << mips_vu0_channel_mask.lsb;
+ return insn;
+ }
+ }
+ }
- default:
- as_bad (_("Internal error: bad microMIPS opcode "
- "(unknown extension operand type `m%c'): %s %s"),
- *args, insn->name, insn->args);
- /* Further processing is fruitless. */
- return;
- }
- break;
+ if (mips_opts.micromips)
+ {
+ /* See if there's an instruction size override suffix,
+ either `16' or `32', at the end of the mnemonic proper,
+ that defines the operation, i.e. before the first `.'
+ character if any. Strip it and retry. */
+ opend = dot != NULL ? dot - name : length;
+ if (opend >= 3 && name[opend - 2] == '1' && name[opend - 1] == '6')
+ suffix = 2;
+ else if (name[opend - 2] == '3' && name[opend - 1] == '2')
+ suffix = 4;
+ else
+ suffix = 0;
+ if (suffix)
+ {
+ memcpy (name + opend - 2, name + opend, length - opend + 1);
+ insn = (struct mips_opcode *) hash_find (hash, name);
+ if (insn)
+ {
+ forced_insn_length = suffix;
+ return insn;
+ }
+ }
+ }
- case 'n': /* Register list for 32-bit lwm and swm. */
- gas_assert (mips_opts.micromips);
- {
- /* A comma-separated list of registers and/or
- dash-separated contiguous ranges including
- at least one of ra and a set of one or more
- registers starting at s0 up to s7 and then
- s8 which have to be consecutive, e.g.:
-
- ra
- s0
- ra, s0, s1, s2
- s0-s8
- s0-s5, ra
-
- and any permutations of these. */
- unsigned int reglist;
- int imm;
- int ra;
-
- if (!reglist_lookup (&s, RTYPE_NUM | RTYPE_GP, ®list))
- break;
+ return NULL;
+}
- if ((reglist & 0x3f00ffff) != 0)
- break;
+/* Assemble an instruction into its binary format. If the instruction
+ is a macro, set imm_expr and offset_expr to the values associated
+ with "I" and "A" operands respectively. Otherwise store the value
+ of the relocatable field (if any) in offset_expr. In both cases
+ set offset_reloc to the relocation operators applied to offset_expr. */
- ra = (reglist >> 27) & 0x10;
- reglist = ((reglist >> 22) & 0x100) | ((reglist >> 16) & 0xff);
- reglist += 1;
- if ((reglist & -reglist) != reglist)
- break;
+static void
+mips_ip (char *str, struct mips_cl_insn *insn)
+{
+ const struct mips_opcode *first, *past;
+ struct hash_control *hash;
+ char format;
+ size_t end;
+ struct mips_operand_token *tokens;
+ unsigned int opcode_extra;
- imm = (ffs (reglist) - 1) | ra;
- INSERT_OPERAND (1, RT, *ip, imm);
- imm_expr.X_op = O_absent;
- }
- continue;
+ if (mips_opts.micromips)
+ {
+ hash = micromips_op_hash;
+ past = µmips_opcodes[bfd_micromips_num_opcodes];
+ }
+ else
+ {
+ hash = op_hash;
+ past = &mips_opcodes[NUMOPCODES];
+ }
+ forced_insn_length = 0;
+ opcode_extra = 0;
- case '|': /* 4-bit trap code. */
- gas_assert (mips_opts.micromips);
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number
- > MICROMIPSOP_MASK_TRAP)
- as_bad (_("Trap code (%lu) for %s not in 0..15 range"),
- (unsigned long) imm_expr.X_add_number,
- ip->insn_mo->name);
- INSERT_OPERAND (1, TRAP, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ /* We first try to match an instruction up to a space or to the end. */
+ for (end = 0; str[end] != '\0' && !ISSPACE (str[end]); end++)
+ continue;
- default:
- as_bad (_("Bad char = '%c'\n"), *args);
- abort ();
- }
- break;
- }
- /* Args don't match. */
- s = argsStart;
- insn_error = _("Illegal operands");
- if (insn + 1 < past && !strcmp (insn->name, insn[1].name))
- {
- ++insn;
- continue;
- }
- else if (wrong_delay_slot_insns && need_delay_slot_ok)
- {
- gas_assert (firstinsn);
- need_delay_slot_ok = FALSE;
- past = insn + 1;
- insn = firstinsn;
- continue;
- }
+ first = mips_lookup_insn (hash, str, end, &opcode_extra);
+ if (first == NULL)
+ {
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
-}
-#define SKIP_SPACE_TABS(S) { while (*(S) == ' ' || *(S) == '\t') ++(S); }
+ if (strcmp (first->name, "li.s") == 0)
+ format = 'f';
+ else if (strcmp (first->name, "li.d") == 0)
+ format = 'd';
+ else
+ format = 0;
+ tokens = mips_parse_arguments (str + end, format);
+ if (!tokens)
+ return;
+
+ if (!match_insns (insn, first, past, tokens, opcode_extra, FALSE)
+ && !match_insns (insn, first, past, tokens, opcode_extra, TRUE))
+ set_insn_error (0, _("invalid operands"));
+
+ obstack_free (&mips_operand_tokens, tokens);
+}
-/* This routine assembles an instruction into its binary format when
- assembling for the mips16. As a side effect, it sets one of the
- global variables imm_reloc or offset_reloc to the type of relocation
- to do if one of the operands is an address expression. It also sets
- forced_insn_length to the resulting instruction size in bytes if the
- user explicitly requested a small or extended instruction. */
+/* As for mips_ip, but used when assembling MIPS16 code.
+ Also set forced_insn_length to the resulting instruction size in
+ bytes if the user explicitly requested a small or extended instruction. */
static void
-mips16_ip (char *str, struct mips_cl_insn *ip)
+mips16_ip (char *str, struct mips_cl_insn *insn)
{
- char *s;
- const char *args;
- struct mips_opcode *insn;
- char *argsstart;
- unsigned int regno;
- unsigned int lastregno = 0;
- char *s_reset;
- size_t i;
-
- insn_error = NULL;
+ char *end, *s, c;
+ struct mips_opcode *first;
+ struct mips_operand_token *tokens;
forced_insn_length = 0;
for (s = str; ISLOWER (*s); ++s)
;
- switch (*s)
+ end = s;
+ c = *end;
+ switch (c)
{
case '\0':
break;
case ' ':
- *s++ = '\0';
+ s++;
break;
case '.':
if (s[1] == 't' && s[2] == ' ')
{
- *s = '\0';
forced_insn_length = 2;
s += 3;
break;
}
else if (s[1] == 'e' && s[2] == ' ')
{
- *s = '\0';
forced_insn_length = 4;
s += 3;
break;
}
/* Fall through. */
default:
- insn_error = _("unknown opcode");
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
if (mips_opts.noautoextend && !forced_insn_length)
forced_insn_length = 2;
- if ((insn = (struct mips_opcode *) hash_find (mips16_op_hash, str)) == NULL)
- {
- insn_error = _("unrecognized opcode");
- return;
- }
+ *end = 0;
+ first = (struct mips_opcode *) hash_find (mips16_op_hash, str);
+ *end = c;
- argsstart = s;
- for (;;)
+ if (!first)
{
- bfd_boolean ok;
-
- gas_assert (strcmp (insn->name, str) == 0);
-
- ok = is_opcode_valid_16 (insn);
- if (! ok)
- {
- if (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes]
- && strcmp (insn->name, insn[1].name) == 0)
- {
- ++insn;
- continue;
- }
- else
- {
- if (!insn_error)
- {
- static char buf[100];
- sprintf (buf,
- _("Opcode not supported on this processor: %s (%s)"),
- mips_cpu_info_from_arch (mips_opts.arch)->name,
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- insn_error = buf;
- }
- return;
- }
- }
-
- create_insn (ip, insn);
- imm_expr.X_op = O_absent;
- imm_reloc[0] = BFD_RELOC_UNUSED;
- imm_reloc[1] = BFD_RELOC_UNUSED;
- imm_reloc[2] = BFD_RELOC_UNUSED;
- imm2_expr.X_op = O_absent;
- offset_expr.X_op = O_absent;
- offset_reloc[0] = BFD_RELOC_UNUSED;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
- for (args = insn->args; 1; ++args)
- {
- int c;
-
- if (*s == ' ')
- ++s;
-
- /* In this switch statement we call break if we did not find
- a match, continue if we did find a match, or return if we
- are done. */
-
- c = *args;
- switch (c)
- {
- case '\0':
- if (*s == '\0')
- {
- offsetT value;
-
- /* Stuff the immediate value in now, if we can. */
- if (imm_expr.X_op == O_constant
- && *imm_reloc > BFD_RELOC_UNUSED
- && insn->pinfo != INSN_MACRO
- && calculate_reloc (*offset_reloc,
- imm_expr.X_add_number, &value))
- {
- mips16_immed (NULL, 0, *imm_reloc - BFD_RELOC_UNUSED,
- *offset_reloc, value, forced_insn_length,
- &ip->insn_opcode);
- imm_expr.X_op = O_absent;
- *imm_reloc = BFD_RELOC_UNUSED;
- *offset_reloc = BFD_RELOC_UNUSED;
- }
-
- return;
- }
- break;
-
- case ',':
- if (*s++ == c)
- continue;
- s--;
- switch (*++args)
- {
- case 'v':
- MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
- continue;
- case 'w':
- MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
- continue;
- }
- break;
-
- case '(':
- case ')':
- if (*s++ == c)
- continue;
- break;
-
- case 'v':
- case 'w':
- if (s[0] != '$')
- {
- if (c == 'v')
- MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
- else
- MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
- ++args;
- continue;
- }
- /* Fall through. */
- case 'x':
- case 'y':
- case 'z':
- case 'Z':
- case '0':
- case 'S':
- case 'R':
- case 'X':
- case 'Y':
- s_reset = s;
- if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no))
- {
- if (c == 'v' || c == 'w')
- {
- if (c == 'v')
- MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
- else
- MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
- ++args;
- continue;
- }
- break;
- }
-
- if (*s == ' ')
- ++s;
- if (args[1] != *s)
- {
- if (c == 'v' || c == 'w')
- {
- regno = mips16_to_32_reg_map[lastregno];
- s = s_reset;
- ++args;
- }
- }
-
- switch (c)
- {
- case 'x':
- case 'y':
- case 'z':
- case 'v':
- case 'w':
- case 'Z':
- regno = mips32_to_16_reg_map[regno];
- break;
-
- case '0':
- if (regno != 0)
- regno = ILLEGAL_REG;
- break;
-
- case 'S':
- if (regno != SP)
- regno = ILLEGAL_REG;
- break;
-
- case 'R':
- if (regno != RA)
- regno = ILLEGAL_REG;
- break;
-
- case 'X':
- case 'Y':
- if (regno == AT && mips_opts.at)
- {
- if (mips_opts.at == ATREG)
- as_warn (_("used $at without \".set noat\""));
- else
- as_warn (_("used $%u with \".set at=$%u\""),
- regno, mips_opts.at);
- }
- break;
-
- default:
- abort ();
- }
-
- if (regno == ILLEGAL_REG)
- break;
-
- switch (c)
- {
- case 'x':
- case 'v':
- MIPS16_INSERT_OPERAND (RX, *ip, regno);
- break;
- case 'y':
- case 'w':
- MIPS16_INSERT_OPERAND (RY, *ip, regno);
- break;
- case 'z':
- MIPS16_INSERT_OPERAND (RZ, *ip, regno);
- break;
- case 'Z':
- MIPS16_INSERT_OPERAND (MOVE32Z, *ip, regno);
- case '0':
- case 'S':
- case 'R':
- break;
- case 'X':
- MIPS16_INSERT_OPERAND (REGR32, *ip, regno);
- break;
- case 'Y':
- regno = ((regno & 7) << 2) | ((regno & 0x18) >> 3);
- MIPS16_INSERT_OPERAND (REG32R, *ip, regno);
- break;
- default:
- abort ();
- }
-
- lastregno = regno;
- continue;
-
- case 'P':
- if (strncmp (s, "$pc", 3) == 0)
- {
- s += 3;
- continue;
- }
- break;
-
- case '5':
- case 'H':
- case 'W':
- case 'D':
- case 'j':
- case 'V':
- case 'C':
- case 'U':
- case 'k':
- case 'K':
- i = my_getSmallExpression (&imm_expr, imm_reloc, s);
- if (i > 0)
- {
- if (imm_expr.X_op != O_constant)
- {
- forced_insn_length = 4;
- ip->insn_opcode |= MIPS16_EXTEND;
- }
- else
- {
- /* We need to relax this instruction. */
- *offset_reloc = *imm_reloc;
- *imm_reloc = (int) BFD_RELOC_UNUSED + c;
- }
- s = expr_end;
- continue;
- }
- *imm_reloc = BFD_RELOC_UNUSED;
- /* Fall through. */
- case '<':
- case '>':
- case '[':
- case ']':
- case '4':
- case '8':
- my_getExpression (&imm_expr, s);
- if (imm_expr.X_op == O_register)
- {
- /* What we thought was an expression turned out to
- be a register. */
-
- if (s[0] == '(' && args[1] == '(')
- {
- /* It looks like the expression was omitted
- before a register indirection, which means
- that the expression is implicitly zero. We
- still set up imm_expr, so that we handle
- explicit extensions correctly. */
- imm_expr.X_op = O_constant;
- imm_expr.X_add_number = 0;
- *imm_reloc = (int) BFD_RELOC_UNUSED + c;
- continue;
- }
-
- break;
- }
-
- /* We need to relax this instruction. */
- *imm_reloc = (int) BFD_RELOC_UNUSED + c;
- s = expr_end;
- continue;
-
- case 'p':
- case 'q':
- case 'A':
- case 'B':
- case 'E':
- /* We use offset_reloc rather than imm_reloc for the PC
- relative operands. This lets macros with both
- immediate and address operands work correctly. */
- my_getExpression (&offset_expr, s);
-
- if (offset_expr.X_op == O_register)
- break;
-
- /* We need to relax this instruction. */
- *offset_reloc = (int) BFD_RELOC_UNUSED + c;
- s = expr_end;
- continue;
-
- case '6': /* break code */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 63)
- as_warn (_("Invalid value for `%s' (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- MIPS16_INSERT_OPERAND (IMM6, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'a': /* 26 bit address */
- case 'i':
- my_getExpression (&offset_expr, s);
- s = expr_end;
- *offset_reloc = BFD_RELOC_MIPS16_JMP;
- ip->insn_opcode <<= 16;
- continue;
-
- case 'l': /* register list for entry macro */
- case 'L': /* register list for exit macro */
- {
- int mask;
-
- if (c == 'l')
- mask = 0;
- else
- mask = 7 << 3;
- while (*s != '\0')
- {
- unsigned int freg, reg1, reg2;
-
- while (*s == ' ' || *s == ',')
- ++s;
- if (reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®1))
- freg = 0;
- else if (reg_lookup (&s, RTYPE_FPU, ®1))
- freg = 1;
- else
- {
- as_bad (_("can't parse register list"));
- break;
- }
- if (*s == ' ')
- ++s;
- if (*s != '-')
- reg2 = reg1;
- else
- {
- ++s;
- if (!reg_lookup (&s, freg ? RTYPE_FPU
- : (RTYPE_GP | RTYPE_NUM), ®2))
- {
- as_bad (_("invalid register list"));
- break;
- }
- }
- if (freg && reg1 == 0 && reg2 == 0 && c == 'L')
- {
- mask &= ~ (7 << 3);
- mask |= 5 << 3;
- }
- else if (freg && reg1 == 0 && reg2 == 1 && c == 'L')
- {
- mask &= ~ (7 << 3);
- mask |= 6 << 3;
- }
- else if (reg1 == 4 && reg2 >= 4 && reg2 <= 7 && c != 'L')
- mask |= (reg2 - 3) << 3;
- else if (reg1 == 16 && reg2 >= 16 && reg2 <= 17)
- mask |= (reg2 - 15) << 1;
- else if (reg1 == RA && reg2 == RA)
- mask |= 1;
- else
- {
- as_bad (_("invalid register list"));
- break;
- }
- }
- /* The mask is filled in in the opcode table for the
- benefit of the disassembler. We remove it before
- applying the actual mask. */
- ip->insn_opcode &= ~ ((7 << 3) << MIPS16OP_SH_IMM6);
- ip->insn_opcode |= mask << MIPS16OP_SH_IMM6;
- }
- continue;
-
- case 'm': /* Register list for save insn. */
- case 'M': /* Register list for restore insn. */
- {
- int opcode = ip->insn_opcode;
- int framesz = 0, seen_framesz = 0;
- int nargs = 0, statics = 0, sregs = 0;
-
- while (*s != '\0')
- {
- unsigned int reg1, reg2;
-
- SKIP_SPACE_TABS (s);
- while (*s == ',')
- ++s;
- SKIP_SPACE_TABS (s);
-
- my_getExpression (&imm_expr, s);
- if (imm_expr.X_op == O_constant)
- {
- /* Handle the frame size. */
- if (seen_framesz)
- {
- as_bad (_("more than one frame size in list"));
- break;
- }
- seen_framesz = 1;
- framesz = imm_expr.X_add_number;
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
- }
-
- if (! reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®1))
- {
- as_bad (_("can't parse register list"));
- break;
- }
-
- while (*s == ' ')
- ++s;
-
- if (*s != '-')
- reg2 = reg1;
- else
- {
- ++s;
- if (! reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®2)
- || reg2 < reg1)
- {
- as_bad (_("can't parse register list"));
- break;
- }
- }
-
- while (reg1 <= reg2)
- {
- if (reg1 >= 4 && reg1 <= 7)
- {
- if (!seen_framesz)
- /* args $a0-$a3 */
- nargs |= 1 << (reg1 - 4);
- else
- /* statics $a0-$a3 */
- statics |= 1 << (reg1 - 4);
- }
- else if ((reg1 >= 16 && reg1 <= 23) || reg1 == 30)
- {
- /* $s0-$s8 */
- sregs |= 1 << ((reg1 == 30) ? 8 : (reg1 - 16));
- }
- else if (reg1 == 31)
- {
- /* Add $ra to insn. */
- opcode |= 0x40;
- }
- else
- {
- as_bad (_("unexpected register in list"));
- break;
- }
- if (++reg1 == 24)
- reg1 = 30;
- }
- }
-
- /* Encode args/statics combination. */
- if (nargs & statics)
- as_bad (_("arg/static registers overlap"));
- else if (nargs == 0xf)
- /* All $a0-$a3 are args. */
- opcode |= MIPS16_ALL_ARGS << 16;
- else if (statics == 0xf)
- /* All $a0-$a3 are statics. */
- opcode |= MIPS16_ALL_STATICS << 16;
- else
- {
- int narg = 0, nstat = 0;
-
- /* Count arg registers. */
- while (nargs & 0x1)
- {
- nargs >>= 1;
- narg++;
- }
- if (nargs != 0)
- as_bad (_("invalid arg register list"));
-
- /* Count static registers. */
- while (statics & 0x8)
- {
- statics = (statics << 1) & 0xf;
- nstat++;
- }
- if (statics != 0)
- as_bad (_("invalid static register list"));
-
- /* Encode args/statics. */
- opcode |= ((narg << 2) | nstat) << 16;
- }
-
- /* Encode $s0/$s1. */
- if (sregs & (1 << 0)) /* $s0 */
- opcode |= 0x20;
- if (sregs & (1 << 1)) /* $s1 */
- opcode |= 0x10;
- sregs >>= 2;
-
- if (sregs != 0)
- {
- /* Count regs $s2-$s8. */
- int nsreg = 0;
- while (sregs & 1)
- {
- sregs >>= 1;
- nsreg++;
- }
- if (sregs != 0)
- as_bad (_("invalid static register list"));
- /* Encode $s2-$s8. */
- opcode |= nsreg << 24;
- }
-
- /* Encode frame size. */
- if (!seen_framesz)
- as_bad (_("missing frame size"));
- else if ((framesz & 7) != 0 || framesz < 0
- || framesz > 0xff * 8)
- as_bad (_("invalid frame size"));
- else if (framesz != 128 || (opcode >> 16) != 0)
- {
- framesz /= 8;
- opcode |= (((framesz & 0xf0) << 16)
- | (framesz & 0x0f));
- }
-
- /* Finally build the instruction. */
- if ((opcode >> 16) != 0 || framesz == 0)
- opcode |= MIPS16_EXTEND;
- ip->insn_opcode = opcode;
- }
- continue;
-
- case 'e': /* extend code */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 0x7ff)
- {
- as_warn (_("Invalid value for `%s' (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= 0x7ff;
- }
- ip->insn_opcode |= imm_expr.X_add_number;
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- default:
- abort ();
- }
- break;
- }
-
- /* Args don't match. */
- if (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes] &&
- strcmp (insn->name, insn[1].name) == 0)
- {
- ++insn;
- s = argsstart;
- continue;
- }
-
- insn_error = _("illegal operands");
-
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
-}
-
-/* This structure holds information we know about a mips16 immediate
- argument type. */
-struct mips16_immed_operand
-{
- /* The type code used in the argument string in the opcode table. */
- int type;
- /* The number of bits in the short form of the opcode. */
- int nbits;
- /* The number of bits in the extended form of the opcode. */
- int extbits;
- /* The amount by which the short form is shifted when it is used;
- for example, the sw instruction has a shift count of 2. */
- int shift;
- /* The amount by which the short form is shifted when it is stored
- into the instruction code. */
- int op_shift;
- /* Non-zero if the short form is unsigned. */
- int unsp;
- /* Non-zero if the extended form is unsigned. */
- int extu;
- /* Non-zero if the value is PC relative. */
- int pcrel;
-};
+ tokens = mips_parse_arguments (s, 0);
+ if (!tokens)
+ return;
-/* The mips16 immediate operand types. */
-
-static const struct mips16_immed_operand mips16_immed_operands[] =
-{
- { '<', 3, 5, 0, MIPS16OP_SH_RZ, 1, 1, 0 },
- { '>', 3, 5, 0, MIPS16OP_SH_RX, 1, 1, 0 },
- { '[', 3, 6, 0, MIPS16OP_SH_RZ, 1, 1, 0 },
- { ']', 3, 6, 0, MIPS16OP_SH_RX, 1, 1, 0 },
- { '4', 4, 15, 0, MIPS16OP_SH_IMM4, 0, 0, 0 },
- { '5', 5, 16, 0, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'H', 5, 16, 1, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'W', 5, 16, 2, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'D', 5, 16, 3, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'j', 5, 16, 0, MIPS16OP_SH_IMM5, 0, 0, 0 },
- { '8', 8, 16, 0, MIPS16OP_SH_IMM8, 1, 0, 0 },
- { 'V', 8, 16, 2, MIPS16OP_SH_IMM8, 1, 0, 0 },
- { 'C', 8, 16, 3, MIPS16OP_SH_IMM8, 1, 0, 0 },
- { 'U', 8, 16, 0, MIPS16OP_SH_IMM8, 1, 1, 0 },
- { 'k', 8, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 0 },
- { 'K', 8, 16, 3, MIPS16OP_SH_IMM8, 0, 0, 0 },
- { 'p', 8, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 1 },
- { 'q', 11, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 1 },
- { 'A', 8, 16, 2, MIPS16OP_SH_IMM8, 1, 0, 1 },
- { 'B', 5, 16, 3, MIPS16OP_SH_IMM5, 1, 0, 1 },
- { 'E', 5, 16, 2, MIPS16OP_SH_IMM5, 1, 0, 1 }
-};
+ if (!match_mips16_insns (insn, first, tokens))
+ set_insn_error (0, _("invalid operands"));
-#define MIPS16_NUM_IMMED \
- (sizeof mips16_immed_operands / sizeof mips16_immed_operands[0])
+ obstack_free (&mips_operand_tokens, tokens);
+}
/* Marshal immediate value VAL for an extended MIPS16 instruction.
NBITS is the number of significant bits in VAL. */
return (extval << 16) | val;
}
+/* Like decode_mips16_operand, but require the operand to be defined and
+ require it to be an integer. */
+
+static const struct mips_int_operand *
+mips16_immed_operand (int type, bfd_boolean extended_p)
+{
+ const struct mips_operand *operand;
+
+ operand = decode_mips16_operand (type, extended_p);
+ if (!operand || (operand->type != OP_INT && operand->type != OP_PCREL))
+ abort ();
+ return (const struct mips_int_operand *) operand;
+}
+
+/* Return true if SVAL fits OPERAND. RELOC is as for mips16_immed. */
+
+static bfd_boolean
+mips16_immed_in_range_p (const struct mips_int_operand *operand,
+ bfd_reloc_code_real_type reloc, offsetT sval)
+{
+ int min_val, max_val;
+
+ min_val = mips_int_operand_min (operand);
+ max_val = mips_int_operand_max (operand);
+ if (reloc != BFD_RELOC_UNUSED)
+ {
+ if (min_val < 0)
+ sval = SEXT_16BIT (sval);
+ else
+ sval &= 0xffff;
+ }
+
+ return (sval >= min_val
+ && sval <= max_val
+ && (sval & ((1 << operand->shift) - 1)) == 0);
+}
+
/* Install immediate value VAL into MIPS16 instruction *INSN,
extending it if necessary. The instruction in *INSN may
already be extended.
bfd_reloc_code_real_type reloc, offsetT val,
unsigned int user_insn_length, unsigned long *insn)
{
- const struct mips16_immed_operand *op;
- int mintiny, maxtiny;
-
- op = mips16_immed_operands;
- while (op->type != type)
- {
- ++op;
- gas_assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
- }
-
- if (op->unsp)
- {
- if (type == '<' || type == '>' || type == '[' || type == ']')
- {
- mintiny = 1;
- maxtiny = 1 << op->nbits;
- }
- else
- {
- mintiny = 0;
- maxtiny = (1 << op->nbits) - 1;
- }
- if (reloc != BFD_RELOC_UNUSED)
- val &= 0xffff;
- }
- else
- {
- mintiny = - (1 << (op->nbits - 1));
- maxtiny = (1 << (op->nbits - 1)) - 1;
- if (reloc != BFD_RELOC_UNUSED)
- val = SEXT_16BIT (val);
- }
+ const struct mips_int_operand *operand;
+ unsigned int uval, length;
- /* Branch offsets have an implicit 0 in the lowest bit. */
- if (type == 'p' || type == 'q')
- val /= 2;
-
- if ((val & ((1 << op->shift) - 1)) != 0
- || val < (mintiny << op->shift)
- || val > (maxtiny << op->shift))
+ operand = mips16_immed_operand (type, FALSE);
+ if (!mips16_immed_in_range_p (operand, reloc, val))
{
/* We need an extended instruction. */
if (user_insn_length == 2)
_("extended operand requested but not required"));
}
- if (mips16_opcode_length (*insn) == 2)
+ length = mips16_opcode_length (*insn);
+ if (length == 4)
{
- int insnval;
-
- insnval = ((val >> op->shift) & ((1 << op->nbits) - 1));
- insnval <<= op->op_shift;
- *insn |= insnval;
+ operand = mips16_immed_operand (type, TRUE);
+ if (!mips16_immed_in_range_p (operand, reloc, val))
+ as_bad_where (file, line,
+ _("operand value out of range for instruction"));
}
+ uval = ((unsigned int) val >> operand->shift) - operand->bias;
+ if (length == 2)
+ *insn = mips_insert_operand (&operand->root, *insn, uval);
else
- {
- long minext, maxext;
-
- if (reloc == BFD_RELOC_UNUSED)
- {
- if (op->extu)
- {
- minext = 0;
- maxext = (1 << op->extbits) - 1;
- }
- else
- {
- minext = - (1 << (op->extbits - 1));
- maxext = (1 << (op->extbits - 1)) - 1;
- }
- if (val < minext || val > maxext)
- as_bad_where (file, line,
- _("operand value out of range for instruction"));
- }
-
- *insn |= mips16_immed_extend (val, op->extbits);
- }
+ *insn |= mips16_immed_extend (uval, operand->root.size);
}
\f
struct percent_op_match
mips_set_option_string (const char **string_ptr, const char *new_value)
{
if (*string_ptr != 0 && strcasecmp (*string_ptr, new_value) != 0)
- as_warn (_("A different %s was already specified, is now %s"),
+ as_warn (_("a different %s was already specified, is now %s"),
string_ptr == &mips_arch_string ? "-march" : "-mtune",
new_value);
case OPTION_64:
mips_abi = N64_ABI;
if (!support_64bit_objects())
- as_fatal (_("No compiled in support for 64 bit object file format"));
+ as_fatal (_("no compiled in support for 64 bit object file format"));
break;
case OPTION_GP32:
{
mips_abi = N64_ABI;
if (! support_64bit_objects())
- as_fatal (_("No compiled in support for 64 bit object file "
+ as_fatal (_("no compiled in support for 64 bit object file "
"format"));
}
else if (strcmp (arg, "eabi") == 0)
mips_pic = VXWORKS_PIC;
break;
+ case OPTION_NAN:
+ if (strcmp (arg, "2008") == 0)
+ mips_flag_nan2008 = TRUE;
+ else if (strcmp (arg, "legacy") == 0)
+ mips_flag_nan2008 = FALSE;
+ else
+ {
+ as_fatal (_("invalid NaN setting -mnan=%s"), arg);
+ return 0;
+ }
+ break;
+
default:
return 0;
}
if (strncmp (TARGET_OS, "pe", 2) == 0)
{
if (g_switch_seen && g_switch_value != 0)
- as_bad (_("-G not supported in this configuration."));
+ as_bad (_("-G not supported in this configuration"));
g_switch_value = 0;
}
There's no harm in specifying both as long as the ISA levels
are the same. */
if (file_mips_isa != arch_info->isa)
- as_bad (_("-%s conflicts with the other architecture options, which imply -%s"),
+ as_bad (_("-%s conflicts with the other architecture options,"
+ " which imply -%s"),
mips_cpu_info_from_isa (file_mips_isa)->name,
mips_cpu_info_from_isa (arch_info->isa)->name);
}
/* We have no relocation type for PC relative MIPS16 instructions. */
if (fixP->fx_addsy && S_GET_SEGMENT (fixP->fx_addsy) != now_seg)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("PC relative MIPS16 instruction references a different section"));
+ _("PC relative MIPS16 instruction references"
+ " a different section"));
return addr;
}
}
}
else
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Unsupported constant in relocation"));
+ _("unsupported constant in relocation"));
}
break;
case BFD_RELOC_16_PCREL_S2:
if ((*valP & 0x3) != 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch to misaligned address (%lx)"), (long) *valP);
+ _("branch to misaligned address (%lx)"), (long) *valP);
/* We need to save the bits in the instruction since fixup_segment()
might be deleting the relocation entry (i.e., a branch within
and there's nothing we can do to fix this instruction
without turning it into a longer sequence. */
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch out of range"));
+ _("branch out of range"));
}
break;
temp = get_absolute_expression ();
if (temp > max_alignment)
- as_bad (_("Alignment too large: %d. assumed."), temp = max_alignment);
+ as_bad (_("alignment too large, %d assumed"), temp = max_alignment);
else if (temp < 0)
{
- as_warn (_("Alignment negative: 0 assumed."));
+ as_warn (_("alignment negative, 0 assumed"));
temp = 0;
}
if (*input_line_pointer == ',')
}
}
else
- as_warn (_("Unrecognized option \"%s\""), opt);
+ as_warn (_("unrecognized option \"%s\""), opt);
*input_line_pointer = c;
demand_empty_rest_of_line ();
char *s = name + 3;
if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, &mips_opts.at))
- as_bad (_("Unrecognized register name `%s'"), s);
+ as_bad (_("unrecognized register name `%s'"), s);
}
else if (strcmp (name, "at") == 0)
{
}
else
{
- as_warn (_("Tried to set unrecognized symbol: %s\n"), name);
+ as_warn (_("tried to set unrecognized symbol: %s\n"), name);
}
mips_check_isa_supports_ases ();
*input_line_pointer = ch;
if (ex.X_op != O_symbol)
{
- as_bad (_("Unsupported use of %s"), dirstr);
+ as_bad (_("unsupported use of %s"), dirstr);
ignore_rest_of_line ();
}
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .gpword"));
+ as_bad (_("unsupported use of .gpword"));
ignore_rest_of_line ();
}
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .gpdword"));
+ as_bad (_("unsupported use of .gpdword"));
ignore_rest_of_line ();
}
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .ehword"));
+ as_bad (_("unsupported use of .ehword"));
ignore_rest_of_line ();
}
demand_empty_rest_of_line ();
}
+/* Handle the .nan pseudo-op. */
+
+static void
+s_nan (int ignore ATTRIBUTE_UNUSED)
+{
+ static const char str_legacy[] = "legacy";
+ static const char str_2008[] = "2008";
+ size_t i;
+
+ for (i = 0; !is_end_of_line[(unsigned char) input_line_pointer[i]]; i++);
+
+ if (i == sizeof (str_2008) - 1
+ && memcmp (input_line_pointer, str_2008, i) == 0)
+ mips_flag_nan2008 = TRUE;
+ else if (i == sizeof (str_legacy) - 1
+ && memcmp (input_line_pointer, str_legacy, i) == 0)
+ mips_flag_nan2008 = FALSE;
+ else
+ as_bad (_("bad .nan directive"));
+
+ input_line_pointer += i;
+ demand_empty_rest_of_line ();
+}
+
/* Handle a .stab[snd] directive. Ideally these directives would be
implemented in a transparent way, so that removing them would not
have any effect on the generated instructions. However, s_stab
mips16_extended_frag (fragS *fragp, asection *sec, long stretch)
{
int type;
- const struct mips16_immed_operand *op;
+ const struct mips_int_operand *operand;
offsetT val;
- int mintiny, maxtiny;
segT symsec;
fragS *sym_frag;
return 1;
type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
- op = mips16_immed_operands;
- while (op->type != type)
- {
- ++op;
- gas_assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
- }
-
- if (op->unsp)
- {
- if (type == '<' || type == '>' || type == '[' || type == ']')
- {
- mintiny = 1;
- maxtiny = 1 << op->nbits;
- }
- else
- {
- mintiny = 0;
- maxtiny = (1 << op->nbits) - 1;
- }
- }
- else
- {
- mintiny = - (1 << (op->nbits - 1));
- maxtiny = (1 << (op->nbits - 1)) - 1;
- }
+ operand = mips16_immed_operand (type, FALSE);
sym_frag = symbol_get_frag (fragp->fr_symbol);
val = S_GET_VALUE (fragp->fr_symbol);
symsec = S_GET_SEGMENT (fragp->fr_symbol);
- if (op->pcrel)
+ if (operand->root.type == OP_PCREL)
{
+ const struct mips_pcrel_operand *pcrel_op;
addressT addr;
+ offsetT maxtiny;
/* We won't have the section when we are called from
mips_relax_frag. However, we will always have been called
branch to a different section, we mark it as such. If SEC is
NULL, and the frag is not marked, then it must be a branch to
the same section. */
+ pcrel_op = (const struct mips_pcrel_operand *) operand;
if (sec == NULL)
{
if (RELAX_MIPS16_LONG_BRANCH (fragp->fr_subtype))
PC relative load or add is the instruction itself, but if it
is in a delay slot (in which case it can not be extended) use
the address of the instruction whose delay slot it is in. */
- if (type == 'p' || type == 'q')
+ if (pcrel_op->include_isa_bit)
{
addr += 2;
/* Ignore the low bit in the target, since it will be set
for a text label. */
- if ((val & 1) != 0)
- --val;
+ val &= -2;
}
else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
addr -= 4;
else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
addr -= 2;
- val -= addr & ~ ((1 << op->shift) - 1);
-
- /* Branch offsets have an implicit 0 in the lowest bit. */
- if (type == 'p' || type == 'q')
- val /= 2;
+ val -= addr & -(1 << pcrel_op->align_log2);
/* If any of the shifted bits are set, we must use an extended
opcode. If the address depends on the size of this
instruction, this can lead to a loop, so we arrange to always
use an extended opcode. We only check this when we are in
the main relaxation loop, when SEC is NULL. */
- if ((val & ((1 << op->shift) - 1)) != 0 && sec == NULL)
+ if ((val & ((1 << operand->shift) - 1)) != 0 && sec == NULL)
{
fragp->fr_subtype =
RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype);
}
/* If we are about to mark a frag as extended because the value
- is precisely maxtiny + 1, then there is a chance of an
- infinite loop as in the following code:
+ is precisely the next value above maxtiny, then there is a
+ chance of an infinite loop as in the following code:
la $4,foo
.skip 1020
.align 2
away, so the la can be shrunk, but then foo is 0x400 away, so
the la must be extended. To avoid this loop, we mark the
frag as extended if it was small, and is about to become
- extended with a value of maxtiny + 1. */
- if (val == ((maxtiny + 1) << op->shift)
+ extended with the next value above maxtiny. */
+ maxtiny = mips_int_operand_max (operand);
+ if (val == maxtiny + (1 << operand->shift)
&& ! RELAX_MIPS16_EXTENDED (fragp->fr_subtype)
&& sec == NULL)
{
else if (symsec != absolute_section && sec != NULL)
as_bad_where (fragp->fr_file, fragp->fr_line, _("unsupported relocation"));
- if ((val & ((1 << op->shift) - 1)) != 0
- || val < (mintiny << op->shift)
- || val > (maxtiny << op->shift))
- return 1;
- else
- return 0;
+ return !mips16_immed_in_range_p (operand, BFD_RELOC_UNUSED, val);
}
/* Compute the length of a branch sequence, and adjust the
if (reloc->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- _("Can not represent %s relocation in this object file format"),
+ _("cannot represent %s relocation in this object file"
+ " format"),
bfd_get_reloc_code_name (code));
retval[0] = NULL;
}
int i;
as_warn_where (fragp->fr_file, fragp->fr_line,
- _("Relaxed out-of-range branch into a jump"));
+ _("relaxed out-of-range branch into a jump"));
if (RELAX_BRANCH_UNCOND (fragp->fr_subtype))
goto uncond;
switch ((insn >> 28) & 0xf)
{
case 4:
- /* bc[0-3][tf]l? instructions can have the condition
- reversed by tweaking a single TF bit, and their
- opcodes all have 0x4???????. */
- gas_assert ((insn & 0xf3e00000) == 0x41000000);
- insn ^= 0x00010000;
+ if ((insn & 0xff000000) == 0x47000000
+ || (insn & 0xff600000) == 0x45600000)
+ {
+ /* BZ.df/BNZ.df, BZ.V/BNZ.V can have the condition
+ reversed by tweaking bit 23. */
+ insn ^= 0x00800000;
+ }
+ else
+ {
+ /* bc[0-3][tf]l? instructions can have the condition
+ reversed by tweaking a single TF bit, and their
+ opcodes all have 0x4???????. */
+ gas_assert ((insn & 0xf3e00000) == 0x41000000);
+ insn ^= 0x00010000;
+ }
break;
case 0:
/* Relax 32-bit branches to a sequence of instructions. */
as_warn_where (fragp->fr_file, fragp->fr_line,
- _("Relaxed out-of-range branch into a jump"));
+ _("relaxed out-of-range branch into a jump"));
/* Set the short-delay-slot bit. */
short_ds = al && (insn & 0x02000000) != 0;
|| (insn & 0xffe30000) == 0x42800000 /* bc2f */
|| (insn & 0xffe30000) == 0x42a00000) /* bc2t */
insn ^= 0x00200000;
+ else if ((insn & 0xff000000) == 0x83000000 /* BZ.df
+ BNZ.df */
+ || (insn & 0xff600000) == 0x81600000) /* BZ.V
+ BNZ.V */
+ insn ^= 0x00800000;
else
abort ();
if (RELAX_MIPS16_P (fragp->fr_subtype))
{
int type;
- const struct mips16_immed_operand *op;
+ const struct mips_int_operand *operand;
offsetT val;
char *buf;
unsigned int user_length, length;
bfd_boolean ext;
type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
- op = mips16_immed_operands;
- while (op->type != type)
- ++op;
+ operand = mips16_immed_operand (type, FALSE);
ext = RELAX_MIPS16_EXTENDED (fragp->fr_subtype);
val = resolve_symbol_value (fragp->fr_symbol);
- if (op->pcrel)
+ if (operand->root.type == OP_PCREL)
{
+ const struct mips_pcrel_operand *pcrel_op;
addressT addr;
+ pcrel_op = (const struct mips_pcrel_operand *) operand;
addr = fragp->fr_address + fragp->fr_fix;
/* The rules for the base address of a PC relative reloc are
complicated; see mips16_extended_frag. */
- if (type == 'p' || type == 'q')
+ if (pcrel_op->include_isa_bit)
{
addr += 2;
if (ext)
addr += 2;
/* Ignore the low bit in the target, since it will be
set for a text label. */
- if ((val & 1) != 0)
- --val;
+ val &= -2;
}
else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
addr -= 4;
else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
addr -= 2;
- addr &= ~ (addressT) ((1 << op->shift) - 1);
+ addr &= -(1 << pcrel_op->align_log2);
val -= addr;
/* Make sure the section winds up with the alignment we have
assumed. */
- if (op->shift > 0)
- record_alignment (asec, op->shift);
+ if (operand->shift > 0)
+ record_alignment (asec, operand->shift);
}
if (ext
if (mips_32bitmode)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_32BITMODE;
-#if 0 /* XXX FIXME */
+ if (mips_flag_nan2008)
+ elf_elfheader (stdoutput)->e_flags |= EF_MIPS_NAN2008;
+
/* 32 bit code with 64 bit FP registers. */
if (!file_mips_fp32 && ABI_NEEDS_32BIT_REGS (mips_abi))
- elf_elfheader (stdoutput)->e_flags |= ???;
-#endif
+ elf_elfheader (stdoutput)->e_flags |= EF_MIPS_FP64;
}
\f
typedef struct proc {
if (!cur_proc_ptr)
{
- as_warn (_(".end directive without a preceding .ent directive."));
+ as_warn (_(".end directive without a preceding .ent directive"));
demand_empty_rest_of_line ();
return;
}
{
gas_assert (S_GET_NAME (p));
if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->func_sym)))
- as_warn (_(".end symbol does not match .ent symbol."));
+ as_warn (_(".end symbol does not match .ent symbol"));
if (debug_type == DEBUG_STABS)
stabs_generate_asm_endfunc (S_GET_NAME (p),
get_number ();
if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) == 0)
- as_warn (_(".ent or .aent not in text section."));
+ as_warn (_(".ent or .aent not in text section"));
if (!aent && cur_proc_ptr)
as_warn (_("missing .end"));
if (*input_line_pointer++ != ','
|| get_absolute_expression_and_terminator (&val) != ',')
{
- as_warn (_("Bad .frame directive"));
+ as_warn (_("bad .frame directive"));
--input_line_pointer;
demand_empty_rest_of_line ();
return;
if (get_absolute_expression_and_terminator (&mask) != ',')
{
- as_warn (_("Bad .mask/.fmask directive"));
+ as_warn (_("bad .mask/.fmask directive"));
--input_line_pointer;
demand_empty_rest_of_line ();
return;
if (mips_matching_cpu_name_p (p->name, cpu_string))
return p;
- as_bad (_("Bad value (%s) for %s"), cpu_string, option);
+ as_bad (_("bad value (%s) for %s"), cpu_string, option);
return 0;
}
-mmcu generate MCU instructions\n\
-mno-mcu do not generate MCU instructions\n"));
fprintf (stream, _("\
+-mmsa generate MSA instructions\n\
+-mno-msa do not generate MSA instructions\n"));
+ fprintf (stream, _("\
-mvirt generate Virtualization instructions\n\
-mno-virt do not generate Virtualization instructions\n"));
fprintf (stream, _("\
-msingle-float only allow 32-bit floating-point operations\n\
-mdouble-float allow 32-bit and 64-bit floating-point operations\n\
--[no-]construct-floats [dis]allow floating point values to be constructed\n\
---[no-]relax-branch [dis]allow out-of-range branches to be relaxed\n"
- ));
+--[no-]relax-branch [dis]allow out-of-range branches to be relaxed\n\
+-mnan=ENCODING select an IEEE 754 NaN encoding convention, either of:\n"));
+
+ first = 1;
+
+ show (stream, "legacy", &column, &first);
+ show (stream, "2008", &column, &first);
+
+ fputc ('\n', stream);
+
fprintf (stream, _("\
-KPIC, -call_shared generate SVR4 position independent code\n\
-call_nonpic generate non-PIC code that can operate with DSOs\n\