/* tc-mips.c -- assemble code for a MIPS chip.
Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
- 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+ Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus
|| mips_opts.isa == ISA_MIPS64 \
|| mips_opts.isa == ISA_MIPS64R2)
+/* True if we want to create R_MIPS_JALR for jalr $25. */
+#ifdef TE_IRIX
+#define MIPS_JALR_HINT_P(EXPR) HAVE_NEWABI
+#else
+/* As a GNU extension, we use R_MIPS_JALR for o32 too. However,
+ because there's no place for any addend, the only acceptable
+ expression is a bare symbol. */
+#define MIPS_JALR_HINT_P(EXPR) \
+ (!HAVE_IN_PLACE_ADDENDS \
+ || ((EXPR)->X_op == O_symbol && (EXPR)->X_add_number == 0))
+#endif
+
/* True if -mips3d was passed or implied by arguments passed on the
command line (e.g., by -march). */
static int file_ase_mips3d;
|| mips_opts.arch == CPU_R4010 \
|| mips_opts.arch == CPU_R10000 \
|| mips_opts.arch == CPU_R12000 \
+ || mips_opts.arch == CPU_R14000 \
+ || mips_opts.arch == CPU_R16000 \
|| mips_opts.arch == CPU_RM7000 \
|| mips_opts.arch == CPU_VR5500 \
)
/* Returns true for a (non floating-point) coprocessor instruction. Reading
or writing the condition code is only possible on the coprocessors and
these insns are not marked with INSN_COP. Thus for these insns use the
- condition-code flags unless this is the floating-point coprocessor. */
+ condition-code flags. */
#define COP_INSN(PINFO) \
(PINFO != INSN_MACRO \
- && (((PINFO) & INSN_COP) \
- || ((PINFO) & (INSN_READ_COND_CODE | INSN_WRITE_COND_CODE) \
- && ((PINFO) & (FP_S | FP_D)) == 0)))
+ && ((PINFO) & (FP_S | FP_D)) == 0 \
+ && ((PINFO) & (INSN_COP | INSN_READ_COND_CODE | INSN_WRITE_COND_CODE)))
/* MIPS PIC level. */
/* Classifies the kind of instructions we're interested in when
implementing -mfix-vr4120. */
-enum fix_vr4120_class {
+enum fix_vr4120_class
+{
FIX_VR4120_MACC,
FIX_VR4120_DMACC,
FIX_VR4120_MULT,
NUM_FIX_VR4120_CLASSES
};
+/* ...likewise -mfix-loongson2f-jump. */
+static bfd_boolean mips_fix_loongson2f_jump;
+
+/* ...likewise -mfix-loongson2f-nop. */
+static bfd_boolean mips_fix_loongson2f_nop;
+
+/* True if -mfix-loongson2f-nop or -mfix-loongson2f-jump passed. */
+static bfd_boolean mips_fix_loongson2f;
+
/* Given two FIX_VR4120_* values X and Y, bit Y of element X is set if
there must be at least one other instruction between an instruction
of type X and an instruction of type Y. */
/* ...likewise -mfix-vr4130. */
static int mips_fix_vr4130;
+/* ...likewise -mfix-24k. */
+static int mips_fix_24k;
+
/* We don't relax branches by default, since this causes us to expand
`la .l2 - .l1' if there's a branch between .l1 and .l2, because we
fail to compute the offset before expanding the macro to the most
enum mips_regclass { MIPS_GR_REG, MIPS_FP_REG, MIPS16_REG };
static void append_insn
- (struct mips_cl_insn *ip, expressionS *p, bfd_reloc_code_real_type *r);
+ (struct mips_cl_insn *, expressionS *, bfd_reloc_code_real_type *);
static void mips_no_prev_insn (void);
+static void macro_build (expressionS *, const char *, const char *, ...);
static void mips16_macro_build
- (expressionS *, const char *, const char *, va_list);
+ (expressionS *, const char *, const char *, va_list *);
static void load_register (int, expressionS *, int);
static void macro_start (void);
static void macro_end (void);
if (reg >= 0)
*s = e;
else if (types & RWARN)
- as_warn ("Unrecognized register name `%s'", *s);
+ as_warn (_("Unrecognized register name `%s'"), *s);
*e = save_c;
if (regnop)
}
/* Return TRUE if opcode MO is valid on the currently selected ISA and
- architecture. If EXPANSIONP is TRUE then this check is done while
- expanding a macro. Use is_opcode_valid_16 for MIPS16 opcodes. */
+ architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
static bfd_boolean
-is_opcode_valid (const struct mips_opcode *mo, bfd_boolean expansionp)
+is_opcode_valid (const struct mips_opcode *mo)
{
int isa = mips_opts.isa;
int fp_s, fp_d;
if (mips_opts.ase_smartmips)
isa |= INSN_SMARTMIPS;
- /* For user code we don't check for mips_opts.mips16 since we want
- to allow jalx if -mips16 was specified on the command line. */
- if (expansionp ? mips_opts.mips16 : file_ase_mips16)
- isa |= INSN_MIPS16;
-
/* Don't accept instructions based on the ISA if the CPU does not implement
all the coprocessor insns. */
if (NO_ISA_COP (mips_opts.arch)
if (nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
{
create_insn (&nop_insn, mips_opcodes + i);
+ if (mips_fix_loongson2f_nop)
+ nop_insn.insn_opcode = LOONGSON2F_NOP_INSN;
nop_insn.fixed_p = 1;
}
}
helps us detect invalid uses of them. */
for (i = 0; reg_names[i].name; i++)
symbol_table_insert (symbol_new (reg_names[i].name, reg_section,
- reg_names[i].num, // & RNUM_MASK,
+ reg_names[i].num, /* & RNUM_MASK, */
&zero_address_frag));
if (HAVE_NEWABI)
for (i = 0; reg_names_n32n64[i].name; i++)
symbol_table_insert (symbol_new (reg_names_n32n64[i].name, reg_section,
- reg_names_n32n64[i].num, // & RNUM_MASK,
+ reg_names_n32n64[i].num, /* & RNUM_MASK, */
&zero_address_frag));
else
for (i = 0; reg_names_o32[i].name; i++)
symbol_table_insert (symbol_new (reg_names_o32[i].name, reg_section,
- reg_names_o32[i].num, // & RNUM_MASK,
+ reg_names_o32[i].num, /* & RNUM_MASK, */
&zero_address_frag));
mips_no_prev_insn ();
static int
insn_uses_reg (const struct mips_cl_insn *ip, unsigned int reg,
- enum mips_regclass class)
+ enum mips_regclass regclass)
{
- if (class == MIPS16_REG)
+ if (regclass == MIPS16_REG)
{
- assert (mips_opts.mips16);
+ gas_assert (mips_opts.mips16);
reg = mips16_to_32_reg_map[reg];
- class = MIPS_GR_REG;
+ regclass = MIPS_GR_REG;
}
/* Don't report on general register ZERO, since it never changes. */
- if (class == MIPS_GR_REG && reg == ZERO)
+ if (regclass == MIPS_GR_REG && reg == ZERO)
return 0;
- if (class == MIPS_FP_REG)
+ if (regclass == MIPS_FP_REG)
{
- assert (! mips_opts.mips16);
+ gas_assert (! mips_opts.mips16);
/* If we are called with either $f0 or $f1, we must check $f0.
This is not optimal, because it will introduce an unnecessary
NOP between "lwc1 $f0" and "swc1 $f1". To fix this we would
for (l = si->label_list; l != NULL; l = l->next)
{
- assert (S_GET_SEGMENT (l->label) == now_seg);
+ gas_assert (S_GET_SEGMENT (l->label) == now_seg);
symbol_set_frag (l->label, frag_now);
val = (valueT) frag_now_fix ();
/* mips16 text labels are stored as odd. */
static void
relax_start (symbolS *symbol)
{
- assert (mips_relax.sequence == 0);
+ gas_assert (mips_relax.sequence == 0);
mips_relax.sequence = 1;
mips_relax.symbol = symbol;
}
static void
relax_switch (void)
{
- assert (mips_relax.sequence == 1);
+ gas_assert (mips_relax.sequence == 1);
mips_relax.sequence = 2;
}
static void
relax_end (void)
{
- assert (mips_relax.sequence == 2);
+ gas_assert (mips_relax.sequence == 2);
relax_close_frag ();
mips_relax.sequence = 0;
}
return NUM_FIX_VR4120_CLASSES;
}
+#define INSN_ERET 0x42000018
+#define INSN_DERET 0x4200001f
+
/* Return the number of instructions that must separate INSN1 and INSN2,
where INSN1 is the earlier instruction. Return the worst-case value
for any INSN2 if INSN2 is null. */
&& INSN2_USES_REG (EXTRACT_OPERAND (RD, *insn1), MIPS_GR_REG))
return 2;
+ /* If we're working around 24K errata, one instruction is required
+ if an ERET or DERET is followed by a branch instruction. */
+ if (mips_fix_24k)
+ {
+ if (insn1->insn_opcode == INSN_ERET
+ || insn1->insn_opcode == INSN_DERET)
+ {
+ if (insn2 == NULL
+ || insn2->insn_opcode == INSN_ERET
+ || insn2->insn_opcode == INSN_DERET
+ || (insn2->insn_mo->pinfo
+ & (INSN_UNCOND_BRANCH_DELAY
+ | INSN_COND_BRANCH_DELAY
+ | INSN_COND_BRANCH_LIKELY)) != 0)
+ return 1;
+ }
+ }
+
/* If working around VR4120 errata, check for combinations that need
a single intervening instruction. */
if (mips_fix_vr4120)
/* Return the number of nops that would be needed to work around the
VR4130 mflo/mfhi errata if instruction INSN immediately followed
- the MAX_VR4130_NOPS instructions described by HISTORY. */
+ the MAX_VR4130_NOPS instructions described by HIST. */
static int
-nops_for_vr4130 (const struct mips_cl_insn *history,
+nops_for_vr4130 (const struct mips_cl_insn *hist,
const struct mips_cl_insn *insn)
{
int i, j, reg;
/* Search for the first MFLO or MFHI. */
for (i = 0; i < MAX_VR4130_NOPS; i++)
- if (!history[i].noreorder_p && MF_HILO_INSN (history[i].insn_mo->pinfo))
+ if (MF_HILO_INSN (hist[i].insn_mo->pinfo))
{
/* Extract the destination register. */
if (mips_opts.mips16)
- reg = mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, history[i])];
+ reg = mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, hist[i])];
else
- reg = EXTRACT_OPERAND (RD, history[i]);
+ reg = EXTRACT_OPERAND (RD, hist[i]);
/* No nops are needed if INSN reads that register. */
if (insn != NULL && insn_uses_reg (insn, reg, MIPS_GR_REG))
/* ...or if any of the intervening instructions do. */
for (j = 0; j < i; j++)
- if (insn_uses_reg (&history[j], reg, MIPS_GR_REG))
+ if (insn_uses_reg (&hist[j], reg, MIPS_GR_REG))
return 0;
return MAX_VR4130_NOPS - i;
}
/* Return the number of nops that would be needed if instruction INSN
- immediately followed the MAX_NOPS instructions given by HISTORY,
- where HISTORY[0] is the most recent instruction. If INSN is null,
+ immediately followed the MAX_NOPS instructions given by HIST,
+ where HIST[0] is the most recent instruction. If INSN is null,
return the worse-case number of nops for any instruction. */
static int
-nops_for_insn (const struct mips_cl_insn *history,
+nops_for_insn (const struct mips_cl_insn *hist,
const struct mips_cl_insn *insn)
{
int i, nops, tmp_nops;
nops = 0;
for (i = 0; i < MAX_DELAY_NOPS; i++)
- if (!history[i].noreorder_p)
- {
- tmp_nops = insns_between (history + i, insn) - i;
- if (tmp_nops > nops)
- nops = tmp_nops;
- }
+ {
+ tmp_nops = insns_between (hist + i, insn) - i;
+ if (tmp_nops > nops)
+ nops = tmp_nops;
+ }
if (mips_fix_vr4130)
{
- tmp_nops = nops_for_vr4130 (history, insn);
+ tmp_nops = nops_for_vr4130 (hist, insn);
if (tmp_nops > nops)
nops = tmp_nops;
}
}
/* The variable arguments provide NUM_INSNS extra instructions that
- might be added to HISTORY. Return the largest number of nops that
+ might be added to HIST. Return the largest number of nops that
would be needed after the extended sequence. */
static int
-nops_for_sequence (int num_insns, const struct mips_cl_insn *history, ...)
+nops_for_sequence (int num_insns, const struct mips_cl_insn *hist, ...)
{
va_list args;
struct mips_cl_insn buffer[MAX_NOPS];
struct mips_cl_insn *cursor;
int nops;
- va_start (args, history);
+ va_start (args, hist);
cursor = buffer + num_insns;
- memcpy (cursor, history, (MAX_NOPS - num_insns) * sizeof (*cursor));
+ memcpy (cursor, hist, (MAX_NOPS - num_insns) * sizeof (*cursor));
while (cursor > buffer)
*--cursor = *va_arg (args, const struct mips_cl_insn *);
worst-case delay for the branch target. */
static int
-nops_for_insn_or_target (const struct mips_cl_insn *history,
+nops_for_insn_or_target (const struct mips_cl_insn *hist,
const struct mips_cl_insn *insn)
{
int nops, tmp_nops;
- nops = nops_for_insn (history, insn);
+ nops = nops_for_insn (hist, insn);
if (insn->insn_mo->pinfo & (INSN_UNCOND_BRANCH_DELAY
| INSN_COND_BRANCH_DELAY
| INSN_COND_BRANCH_LIKELY))
{
- tmp_nops = nops_for_sequence (2, history, insn, NOP_INSN);
+ tmp_nops = nops_for_sequence (2, hist, insn, NOP_INSN);
if (tmp_nops > nops)
nops = tmp_nops;
}
- else if (mips_opts.mips16 && (insn->insn_mo->pinfo & MIPS16_INSN_BRANCH))
+ else if (mips_opts.mips16
+ && (insn->insn_mo->pinfo & (MIPS16_INSN_UNCOND_BRANCH
+ | MIPS16_INSN_COND_BRANCH)))
{
- tmp_nops = nops_for_sequence (1, history, insn);
+ tmp_nops = nops_for_sequence (1, hist, insn);
if (tmp_nops > nops)
nops = tmp_nops;
}
return nops;
}
+/* Fix NOP issue: Replace nops by "or at,at,zero". */
+
+static void
+fix_loongson2f_nop (struct mips_cl_insn * ip)
+{
+ if (strcmp (ip->insn_mo->name, "nop") == 0)
+ ip->insn_opcode = LOONGSON2F_NOP_INSN;
+}
+
+/* Fix Jump Issue: Eliminate instruction fetch from outside 256M region
+ jr target pc &= 'hffff_ffff_cfff_ffff. */
+
+static void
+fix_loongson2f_jump (struct mips_cl_insn * ip)
+{
+ if (strcmp (ip->insn_mo->name, "j") == 0
+ || strcmp (ip->insn_mo->name, "jr") == 0
+ || strcmp (ip->insn_mo->name, "jalr") == 0)
+ {
+ int sreg;
+ expressionS ep;
+
+ if (! mips_opts.at)
+ return;
+
+ sreg = EXTRACT_OPERAND (RS, *ip);
+ if (sreg == ZERO || sreg == KT0 || sreg == KT1 || sreg == ATREG)
+ return;
+
+ ep.X_op = O_constant;
+ ep.X_add_number = 0xcfff0000;
+ macro_build (&ep, "lui", "t,u", ATREG, BFD_RELOC_HI16);
+ ep.X_add_number = 0xffff;
+ macro_build (&ep, "ori", "t,r,i", ATREG, ATREG, BFD_RELOC_LO16);
+ macro_build (NULL, "and", "d,v,t", sreg, sreg, ATREG);
+ }
+}
+
+static void
+fix_loongson2f (struct mips_cl_insn * ip)
+{
+ if (mips_fix_loongson2f_nop)
+ fix_loongson2f_nop (ip);
+
+ if (mips_fix_loongson2f_jump)
+ fix_loongson2f_jump (ip);
+}
+
/* Output an instruction. IP is the instruction information.
ADDRESS_EXPR is an operand of the instruction to be used with
RELOC_TYPE. */
bfd_boolean relaxed_branch = FALSE;
segment_info_type *si = seg_info (now_seg);
+ if (mips_fix_loongson2f)
+ fix_loongson2f (ip);
+
/* Mark instruction labels in mips16 mode. */
mips16_mark_labels ();
{
/* Work out how many nops in prev_nop_frag are needed by IP. */
int nops = nops_for_insn_or_target (history, ip);
- assert (nops <= prev_nop_frag_holds);
+ gas_assert (nops <= prev_nop_frag_holds);
/* Enforce NOPS as a minimum. */
if (nops > prev_nop_frag_required)
else if (*reloc_type > BFD_RELOC_UNUSED)
{
/* We need to set up a variant frag. */
- assert (mips_opts.mips16 && address_expr != NULL);
+ gas_assert (mips_opts.mips16 && address_expr != NULL);
add_relaxed_insn (ip, 4, 0,
RELAX_MIPS16_ENCODE
(*reloc_type - BFD_RELOC_UNUSED,
break;
howto = bfd_reloc_type_lookup (stdoutput, reloc_type[i - 1]);
+ if (howto == NULL)
+ {
+ /* To reproduce this failure try assembling gas/testsuites/
+ gas/mips/mips16-intermix.s with a mips-ecoff targeted
+ assembler. */
+ as_bad (_("Unsupported MIPS relocation number %d"), reloc_type[i - 1]);
+ howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_16);
+ }
+
ip->fixp[0] = fix_new_exp (ip->frag, ip->where,
bfd_get_reloc_size (howto),
address_expr,
|| (mips_opts.mips16 && history[0].fixp[0])
/* If the previous instruction is a sync, sync.l, or
sync.p, we can not swap. */
- || (prev_pinfo & INSN_SYNC))
+ || (prev_pinfo & INSN_SYNC)
+ /* If the previous instruction is an ERET or
+ DERET, avoid the swap. */
+ || (history[0].insn_opcode == INSN_ERET)
+ || (history[0].insn_opcode == INSN_DERET))
{
if (mips_opts.mips16
&& (pinfo & INSN_UNCOND_BRANCH_DELAY)
/* If that was an unconditional branch, forget the previous
insn information. */
if (pinfo & INSN_UNCOND_BRANCH_DELAY)
- mips_no_prev_insn ();
+ {
+ mips_no_prev_insn ();
+ }
}
else if (pinfo & INSN_COND_BRANCH_LIKELY)
{
static void
end_noreorder (void)
{
+
mips_opts.noreorder--;
if (mips_opts.noreorder == 0 && prev_nop_frag != NULL)
{
warning now. */
const char *msg = macro_warning (subtype);
if (msg != 0)
- as_warn (msg);
+ as_warn ("%s", msg);
}
else
{
if (mips_opts.mips16)
{
- mips16_macro_build (ep, name, fmt, args);
+ mips16_macro_build (ep, name, fmt, &args);
va_end (args);
return;
}
r[1] = BFD_RELOC_UNUSED;
r[2] = BFD_RELOC_UNUSED;
mo = (struct mips_opcode *) hash_find (op_hash, name);
- assert (mo);
- assert (strcmp (name, mo->name) == 0);
+ gas_assert (mo);
+ gas_assert (strcmp (name, mo->name) == 0);
while (1)
{
macros will never generate MDMX, MIPS-3D, or MT instructions. */
if (strcmp (fmt, mo->args) == 0
&& mo->pinfo != INSN_MACRO
- && is_opcode_valid (mo, TRUE))
+ && is_opcode_valid (mo))
break;
++mo;
- assert (mo->name);
- assert (strcmp (name, mo->name) == 0);
+ gas_assert (mo->name);
+ gas_assert (strcmp (name, mo->name) == 0);
}
create_insn (&insn, mo);
case 'j':
case 'o':
macro_read_relocs (&args, r);
- assert (*r == BFD_RELOC_GPREL16
+ gas_assert (*r == BFD_RELOC_GPREL16
|| *r == BFD_RELOC_MIPS_LITERAL
|| *r == BFD_RELOC_MIPS_HIGHER
|| *r == BFD_RELOC_HI16_S
case 'u':
macro_read_relocs (&args, r);
- assert (ep != NULL
+ gas_assert (ep != NULL
&& (ep->X_op == O_constant
|| (ep->X_op == O_symbol
&& (*r == BFD_RELOC_MIPS_HIGHEST
continue;
case 'p':
- assert (ep != NULL);
+ gas_assert (ep != NULL);
/*
* This allows macro() to pass an immediate expression for
continue;
case 'a':
- assert (ep != NULL);
+ gas_assert (ep != NULL);
*r = BFD_RELOC_MIPS_JMP;
continue;
break;
}
va_end (args);
- assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
+ gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
append_insn (&insn, ep, r);
}
static void
mips16_macro_build (expressionS *ep, const char *name, const char *fmt,
- va_list args)
+ va_list *args)
{
struct mips_opcode *mo;
struct mips_cl_insn insn;
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
mo = (struct mips_opcode *) hash_find (mips16_op_hash, name);
- assert (mo);
- assert (strcmp (name, mo->name) == 0);
+ gas_assert (mo);
+ gas_assert (strcmp (name, mo->name) == 0);
while (strcmp (fmt, mo->args) != 0 || mo->pinfo == INSN_MACRO)
{
++mo;
- assert (mo->name);
- assert (strcmp (name, mo->name) == 0);
+ gas_assert (mo->name);
+ gas_assert (strcmp (name, mo->name) == 0);
}
create_insn (&insn, mo);
case 'y':
case 'w':
- MIPS16_INSERT_OPERAND (RY, insn, va_arg (args, int));
+ MIPS16_INSERT_OPERAND (RY, insn, va_arg (*args, int));
continue;
case 'x':
case 'v':
- MIPS16_INSERT_OPERAND (RX, insn, va_arg (args, int));
+ MIPS16_INSERT_OPERAND (RX, insn, va_arg (*args, int));
continue;
case 'z':
- MIPS16_INSERT_OPERAND (RZ, insn, va_arg (args, int));
+ MIPS16_INSERT_OPERAND (RZ, insn, va_arg (*args, int));
continue;
case 'Z':
- MIPS16_INSERT_OPERAND (MOVE32Z, insn, va_arg (args, int));
+ MIPS16_INSERT_OPERAND (MOVE32Z, insn, va_arg (*args, int));
continue;
case '0':
continue;
case 'X':
- MIPS16_INSERT_OPERAND (REGR32, insn, va_arg (args, int));
+ MIPS16_INSERT_OPERAND (REGR32, insn, va_arg (*args, int));
continue;
case 'Y':
{
int regno;
- regno = va_arg (args, int);
+ regno = va_arg (*args, int);
regno = ((regno & 7) << 2) | ((regno & 0x18) >> 3);
MIPS16_INSERT_OPERAND (REG32R, insn, regno);
}
case 'p':
case 'q':
{
- assert (ep != NULL);
+ gas_assert (ep != NULL);
if (ep->X_op != O_constant)
*r = (int) BFD_RELOC_UNUSED + c;
continue;
case '6':
- MIPS16_INSERT_OPERAND (IMM6, insn, va_arg (args, int));
+ MIPS16_INSERT_OPERAND (IMM6, insn, va_arg (*args, int));
continue;
}
break;
}
- assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
+ gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
append_insn (&insn, ep, r);
}
{
char *f = NULL;
- if (HAVE_NEWABI)
+ if (MIPS_JALR_HINT_P (ep))
{
frag_grow (8);
f = frag_more (0);
}
macro_build (NULL, "jalr", "d,s", RA, PIC_CALL_REG);
- if (HAVE_NEWABI)
+ if (MIPS_JALR_HINT_P (ep))
fix_new_exp (frag_now, f - frag_now->fr_literal,
4, ep, FALSE, BFD_RELOC_MIPS_JALR);
}
const char *name = "lui";
const char *fmt = "t,u";
- assert (! mips_opts.mips16);
+ gas_assert (! mips_opts.mips16);
high_expr = *ep;
}
else
{
- assert (ep->X_op == O_symbol);
+ gas_assert (ep->X_op == O_symbol);
/* _gp_disp is a special case, used from s_cpload.
__gnu_local_gp is used if mips_no_shared. */
- assert (mips_pic == NO_PIC
+ gas_assert (mips_pic == NO_PIC
|| (! HAVE_NEWABI
&& strcmp (S_GET_NAME (ep->X_add_symbol), "_gp_disp") == 0)
|| (! mips_in_shared
}
mo = hash_find (op_hash, name);
- assert (strcmp (name, mo->name) == 0);
- assert (strcmp (fmt, mo->args) == 0);
+ gas_assert (strcmp (name, mo->name) == 0);
+ gas_assert (strcmp (fmt, mo->args) == 0);
create_insn (&insn, mo);
insn.insn_opcode = insn.insn_mo->match;
macro_build_ldst_constoffset (expressionS *ep, const char *op,
int treg, int breg, int dbl)
{
- assert (ep->X_op == O_constant);
+ gas_assert (ep->X_op == O_constant);
/* Sign-extending 32-bit constants makes their handling easier. */
if (!dbl)
if (ep->X_op != O_big)
{
- assert (ep->X_op == O_constant);
+ gas_assert (ep->X_op == O_constant);
/* Sign-extending 32-bit constants makes their handling easier. */
if (!dbl)
}
else
{
- assert (ep->X_add_number > 2);
+ gas_assert (ep->X_add_number > 2);
if (ep->X_add_number == 3)
generic_bignum[3] = 0;
else if (ep->X_add_number > 4)
bfd_reloc_code_real_type r;
int hold_mips_optimize;
- assert (! mips_opts.mips16);
+ gas_assert (! mips_opts.mips16);
treg = (ip->insn_opcode >> 16) & 0x1f;
dreg = (ip->insn_opcode >> 11) & 0x1f;
s = "dinsm";
fmt = "t,r,+A,+F";
}
- macro_build ((expressionS *) NULL, s, fmt, treg, sreg, pos,
- pos + size - 1);
+ macro_build ((expressionS *) NULL, s, fmt, treg, sreg, (int) pos,
+ (int) (pos + size - 1));
}
break;
}
else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
{
- int dreg;
-
/* If we are going to add in a base register, and the
target register and the base register are the same,
then we are using AT as a temporary register. Since
dreg = tempreg;
else
{
- assert (tempreg == AT);
+ gas_assert (tempreg == AT);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
treg, AT, breg);
dreg = treg;
}
else
{
- int dreg;
-
/* If we are going to add in a base register, and the
target register and the base register are the same,
then we are using AT as a temporary register. Since
dreg = tempreg;
else
{
- assert (tempreg == AT);
+ gas_assert (tempreg == AT);
load_delay_nop ();
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
treg, AT, breg);
{
/* We must add in the base register now, as in the
external symbol case. */
- assert (tempreg == AT);
+ gas_assert (tempreg == AT);
load_delay_nop ();
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
treg, AT, breg);
}
else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
{
- int dreg;
-
/* If we are going to add in a base register, and the
target register and the base register are the same,
then we are using AT as a temporary register. Since
dreg = tempreg;
else
{
- assert (tempreg == AT);
+ gas_assert (tempreg == AT);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
treg, AT, breg);
dreg = treg;
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", treg, tempreg, breg);
break;
+ case M_MSGSND:
+ {
+ unsigned long temp = (treg << 16) | (0x01);
+ macro_build (NULL, "c2", "C", temp);
+ }
+ /* AT is not used, just return */
+ return;
+
+ case M_MSGLD:
+ {
+ unsigned long temp = (0x02);
+ macro_build (NULL, "c2", "C", temp);
+ }
+ /* AT is not used, just return */
+ return;
+
+ case M_MSGLD_T:
+ {
+ unsigned long temp = (treg << 16) | (0x02);
+ macro_build (NULL, "c2", "C", temp);
+ }
+ /* AT is not used, just return */
+ return;
+
+ case M_MSGWAIT:
+ macro_build (NULL, "c2", "C", 3);
+ /* AT is not used, just return */
+ return;
+
+ case M_MSGWAIT_T:
+ {
+ unsigned long temp = (treg << 16) | 0x03;
+ macro_build (NULL, "c2", "C", temp);
+ }
+ /* AT is not used, just return */
+ return;
+
case M_J_A:
/* The j instruction may not be used in PIC code, since it
requires an absolute address. We convert it to a b
/* Quiet this warning. */
mips_cprestore_valid = 1;
}
+ if (mips_opts.noreorder)
+ macro_build (NULL, "nop", "");
expr1.X_add_number = mips_cprestore_offset;
macro_build_ldst_constoffset (&expr1, ADDRESS_LOAD_INSN,
mips_gp_register,
16 bits, because we have no way to load the upper 16 bits
(actually, we could handle them for the subset of cases
in which we are not using $at). */
- assert (offset_expr.X_op == O_symbol);
+ gas_assert (offset_expr.X_op == O_symbol);
if (HAVE_NEWABI)
{
macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg,
16 bits, because we have no way to load the upper 16 bits
(actually, we could handle them for the subset of cases
in which we are not using $at). */
- assert (offset_expr.X_op == O_symbol);
+ gas_assert (offset_expr.X_op == O_symbol);
expr1.X_add_number = offset_expr.X_add_number;
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
Otherwise, for local symbols, we want:
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
<op> $treg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST) */
- assert (offset_expr.X_op == O_symbol);
+ gas_assert (offset_expr.X_op == O_symbol);
expr1.X_add_number = offset_expr.X_add_number;
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
}
else
{
- assert (offset_expr.X_op == O_symbol
+ gas_assert (offset_expr.X_op == O_symbol
&& strcmp (segment_name (S_GET_SEGMENT
(offset_expr.X_add_symbol)),
".lit4") == 0
move_register (lreg, 0);
else
{
- assert (offset_expr.X_op == O_constant);
+ gas_assert (offset_expr.X_op == O_constant);
load_register (lreg, &offset_expr, 0);
}
}
load_register (AT, &imm_expr, HAVE_64BIT_FPRS);
if (HAVE_64BIT_FPRS)
{
- assert (HAVE_64BIT_GPRS);
+ gas_assert (HAVE_64BIT_GPRS);
macro_build (NULL, "dmtc1", "t,S", AT, treg);
}
else
macro_build (NULL, "mtc1", "t,G", 0, treg);
else
{
- assert (offset_expr.X_op == O_constant);
+ gas_assert (offset_expr.X_op == O_constant);
load_register (AT, &offset_expr, 0);
macro_build (NULL, "mtc1", "t,G", AT, treg);
}
break;
}
- assert (offset_expr.X_op == O_symbol
+ gas_assert (offset_expr.X_op == O_symbol
&& offset_expr.X_add_number == 0);
s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol));
if (strcmp (s, ".lit8") == 0)
}
else
{
- assert (strcmp (s, RDATA_SECTION_NAME) == 0);
+ gas_assert (strcmp (s, RDATA_SECTION_NAME) == 0);
used_at = 1;
if (mips_pic != NO_PIC)
macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
to adjust when loading from memory. */
r = BFD_RELOC_LO16;
dob:
- assert (mips_opts.isa == ISA_MIPS1);
+ gas_assert (mips_opts.isa == ISA_MIPS1);
macro_build (&offset_expr, "lwc1", "T,o(b)",
target_big_endian ? treg + 1 : treg, r, breg);
/* FIXME: A possible overflow which I don't know how to deal
case M_SD_OB:
s = "sw";
sd_ob:
- assert (HAVE_32BIT_ADDRESSES);
+ gas_assert (HAVE_32BIT_ADDRESSES);
macro_build (&offset_expr, s, "t,o(b)", treg, BFD_RELOC_LO16, breg);
offset_expr.X_add_number += 4;
macro_build (&offset_expr, s, "t,o(b)", treg + 1, BFD_RELOC_LO16, breg);
case M_DROL_I:
{
unsigned int rot;
- char *l, *r;
+ char *l;
+ char *rr;
if (imm_expr.X_op != O_constant)
as_bad (_("Improper rotate count"));
break;
}
l = (rot < 0x20) ? "dsll" : "dsll32";
- r = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32";
+ rr = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32";
rot &= 0x1f;
used_at = 1;
macro_build (NULL, l, "d,w,<", AT, sreg, rot);
- macro_build (NULL, r, "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build (NULL, rr, "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
}
break;
case M_DROR_I:
{
unsigned int rot;
- char *l, *r;
+ char *l;
+ char *rr;
if (imm_expr.X_op != O_constant)
as_bad (_("Improper rotate count"));
macro_build (NULL, "dsrl", "d,w,<", dreg, sreg, 0);
break;
}
- r = (rot < 0x20) ? "dsrl" : "dsrl32";
+ rr = (rot < 0x20) ? "dsrl" : "dsrl32";
l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32";
rot &= 0x1f;
used_at = 1;
- macro_build (NULL, r, "d,w,<", AT, sreg, rot);
+ macro_build (NULL, rr, "d,w,<", AT, sreg, rot);
macro_build (NULL, l, "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
}
break;
case M_S_DOB:
- assert (mips_opts.isa == ISA_MIPS1);
+ gas_assert (mips_opts.isa == ISA_MIPS1);
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when storing to memory. */
macro_build (&offset_expr, "swc1", "T,o(b)",
&& imm_expr.X_add_number < 512)
{
macro_build (NULL, "seqi", "t,r,+Q", dreg, sreg,
- imm_expr.X_add_number);
+ (int) imm_expr.X_add_number);
break;
}
if (imm_expr.X_op == O_constant
&& imm_expr.X_add_number < 512)
{
macro_build (NULL, "snei", "t,r,+Q", dreg, sreg,
- imm_expr.X_add_number);
+ (int) imm_expr.X_add_number);
break;
}
if (imm_expr.X_op == O_constant
case M_TRUNCWS:
case M_TRUNCWD:
- assert (mips_opts.isa == ISA_MIPS1);
+ gas_assert (mips_opts.isa == ISA_MIPS1);
used_at = 1;
sreg = (ip->insn_opcode >> 11) & 0x1f; /* floating reg */
dreg = (ip->insn_opcode >> 06) & 0x1f; /* floating reg */
case '%': USE_BITS (OP_MASK_VECALIGN, OP_SH_VECALIGN); break;
case '[': break;
case ']': break;
+ case '1': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
case '2': USE_BITS (OP_MASK_BP, OP_SH_BP); break;
case '3': USE_BITS (OP_MASK_SA3, OP_SH_SA3); break;
case '4': USE_BITS (OP_MASK_SA4, OP_SH_SA4); break;
/* If we did not find a '.', then we can quit now. */
if (*s != '.')
{
- insn_error = "unrecognized opcode";
+ insn_error = _("unrecognized opcode");
return;
}
*s++ = '\0';
if ((insn = (struct mips_opcode *) hash_find (op_hash, str)) == NULL)
{
- insn_error = "unrecognized opcode";
+ insn_error = _("unrecognized opcode");
return;
}
}
{
bfd_boolean ok;
- assert (strcmp (insn->name, str) == 0);
+ gas_assert (strcmp (insn->name, str) == 0);
- ok = is_opcode_valid (insn, FALSE);
+ ok = is_opcode_valid (insn);
if (! ok)
{
if (insn + 1 < &mips_opcodes[NUMOPCODES]
create_insn (ip, insn);
insn_error = NULL;
argnum = 1;
+ lastregno = 0xffffffff;
for (args = insn->args;; ++args)
{
int is_mdmx;
we must have a left paren. */
/* This is dependent on the next operand specifier
is a base register specification. */
- assert (args[1] == 'b' || args[1] == '5'
+ gas_assert (args[1] == 'b' || args[1] == '5'
|| args[1] == '-' || args[1] == '4');
if (*s == '\0')
return;
case 'k': /* cache code */
case 'h': /* prefx code */
+ case '1': /* sync type */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
(unsigned long) imm_expr.X_add_number);
if (*args == 'k')
INSERT_OPERAND (CACHE, *ip, imm_expr.X_add_number);
- else
+ else if (*args == 'h')
INSERT_OPERAND (PREFX, *ip, imm_expr.X_add_number);
+ else
+ INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
if (c == 'z' && regno != 0)
break;
- if (c == 's' && !strcmp (ip->insn_mo->name, "jalr"))
+ if (c == 's' && !strncmp (ip->insn_mo->name, "jalr", 4))
{
if (regno == lastregno)
{
- insn_error = _("source and destinationations must be different");
+ insn_error = _("source and destination must be different");
continue;
}
- if (regno == 31 && lastregno == 0)
+ if (regno == 31 && lastregno == 0xffffffff)
{
insn_error = _("a destination register must be supplied");
continue;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > OP_MASK_ALN)
- as_warn ("Improper align amount (%ld), using low bits",
+ as_warn (_("Improper align amount (%ld), using low bits"),
(long) imm_expr.X_add_number);
INSERT_OPERAND (ALN, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
check_absolute_expr (ip, &imm_expr);
s = expr_end;
if (imm_expr.X_add_number > max_el)
- as_bad(_("Bad element selector %ld"),
- (long) imm_expr.X_add_number);
+ as_bad (_("Bad element selector %ld"),
+ (long) imm_expr.X_add_number);
imm_expr.X_add_number &= max_el;
ip->insn_opcode |= (imm_expr.X_add_number
<< (OP_SH_VSEL +
(is_qh ? 2 : 1)));
imm_expr.X_op = O_absent;
if (*s != ']')
- as_warn(_("Expecting ']' found '%s'"), s);
+ as_warn (_("Expecting ']' found '%s'"), s);
else
s++;
}
length = f64 ? 8 : 4;
}
- assert (length == (unsigned) (f64 ? 8 : 4));
+ gas_assert (length == (unsigned) (f64 ? 8 : 4));
if (*args == 'f'
|| (*args == 'l'
newname = RDATA_SECTION_NAME;
break;
case 'l':
- assert (g_switch_value >= 4);
+ gas_assert (g_switch_value >= 4);
newname = ".lit4";
break;
}
/* Set the argument to the current address in the
section. */
offset_expr.X_op = O_symbol;
- offset_expr.X_add_symbol =
- symbol_new ("L0\001", now_seg,
- (valueT) frag_now_fix (), frag_now);
+ offset_expr.X_add_symbol = symbol_temp_new_now ();
offset_expr.X_add_number = 0;
/* Put the floating point number into the section. */
|| strcmp(str + strlen(str) - 5, "any2f") == 0
|| strcmp(str + strlen(str) - 5, "any2t") == 0)
&& (regno & 1) != 0)
- as_warn(_("Condition code register should be even for %s, was %d"),
- str, regno);
+ as_warn (_("Condition code register should be even for %s, was %d"),
+ str, regno);
if ((strcmp(str + strlen(str) - 5, "any4f") == 0
|| strcmp(str + strlen(str) - 5, "any4t") == 0)
&& (regno & 3) != 0)
- as_warn(_("Condition code register should be 0 or 4 for %s, was %d"),
- str, regno);
+ as_warn (_("Condition code register should be 0 or 4 for %s, was %d"),
+ str, regno);
if (*args == 'N')
INSERT_OPERAND (BCC, *ip, regno);
else
{
bfd_boolean ok;
- assert (strcmp (insn->name, str) == 0);
+ gas_assert (strcmp (insn->name, str) == 0);
ok = is_opcode_valid_16 (insn);
if (! ok)
{
int opcode = 0;
int framesz = 0, seen_framesz = 0;
- int args = 0, statics = 0, sregs = 0;
+ int nargs = 0, statics = 0, sregs = 0;
while (*s != '\0')
{
{
if (!seen_framesz)
/* args $a0-$a3 */
- args |= 1 << (reg1 - 4);
+ nargs |= 1 << (reg1 - 4);
else
/* statics $a0-$a3 */
statics |= 1 << (reg1 - 4);
}
/* Encode args/statics combination. */
- if (args & statics)
+ if (nargs & statics)
as_bad (_("arg/static registers overlap"));
- else if (args == 0xf)
+ else if (nargs == 0xf)
/* All $a0-$a3 are args. */
opcode |= MIPS16_ALL_ARGS << 16;
else if (statics == 0xf)
int narg = 0, nstat = 0;
/* Count arg registers. */
- while (args & 0x1)
+ while (nargs & 0x1)
{
- args >>= 1;
+ nargs >>= 1;
narg++;
}
- if (args != 0)
+ if (nargs != 0)
as_bad (_("invalid arg register list"));
/* Count static registers. */
while (op->type != type)
{
++op;
- assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
+ gas_assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
}
if (op->unsp)
If not, issue an error and fall back on something safe. */
if (!bfd_reloc_type_lookup (stdoutput, percent_op[i].reloc))
{
- as_bad ("relocation %s isn't supported by the current ABI",
+ as_bad (_("relocation %s isn't supported by the current ABI"),
percent_op[i].str);
*reloc = BFD_RELOC_UNUSED;
}
crux_depth--;
if (crux_depth > 0)
- as_bad ("unclosed '('");
+ as_bad (_("unclosed '('"));
expr_end = str;
const char *md_shortopts = "O::g::G:";
+enum options
+ {
+ OPTION_MARCH = OPTION_MD_BASE,
+ OPTION_MTUNE,
+ OPTION_MIPS1,
+ OPTION_MIPS2,
+ OPTION_MIPS3,
+ OPTION_MIPS4,
+ OPTION_MIPS5,
+ OPTION_MIPS32,
+ OPTION_MIPS64,
+ OPTION_MIPS32R2,
+ OPTION_MIPS64R2,
+ OPTION_MIPS16,
+ OPTION_NO_MIPS16,
+ OPTION_MIPS3D,
+ OPTION_NO_MIPS3D,
+ OPTION_MDMX,
+ OPTION_NO_MDMX,
+ OPTION_DSP,
+ OPTION_NO_DSP,
+ OPTION_MT,
+ OPTION_NO_MT,
+ OPTION_SMARTMIPS,
+ OPTION_NO_SMARTMIPS,
+ OPTION_DSPR2,
+ OPTION_NO_DSPR2,
+ OPTION_COMPAT_ARCH_BASE,
+ OPTION_M4650,
+ OPTION_NO_M4650,
+ OPTION_M4010,
+ OPTION_NO_M4010,
+ OPTION_M4100,
+ OPTION_NO_M4100,
+ OPTION_M3900,
+ OPTION_NO_M3900,
+ OPTION_M7000_HILO_FIX,
+ OPTION_MNO_7000_HILO_FIX,
+ OPTION_FIX_24K,
+ OPTION_NO_FIX_24K,
+ OPTION_FIX_LOONGSON2F_JUMP,
+ OPTION_NO_FIX_LOONGSON2F_JUMP,
+ OPTION_FIX_LOONGSON2F_NOP,
+ OPTION_NO_FIX_LOONGSON2F_NOP,
+ OPTION_FIX_VR4120,
+ OPTION_NO_FIX_VR4120,
+ OPTION_FIX_VR4130,
+ OPTION_NO_FIX_VR4130,
+ OPTION_TRAP,
+ OPTION_BREAK,
+ OPTION_EB,
+ OPTION_EL,
+ OPTION_FP32,
+ OPTION_GP32,
+ OPTION_CONSTRUCT_FLOATS,
+ OPTION_NO_CONSTRUCT_FLOATS,
+ OPTION_FP64,
+ OPTION_GP64,
+ OPTION_RELAX_BRANCH,
+ OPTION_NO_RELAX_BRANCH,
+ OPTION_MSHARED,
+ OPTION_MNO_SHARED,
+ OPTION_MSYM32,
+ OPTION_MNO_SYM32,
+ OPTION_SOFT_FLOAT,
+ OPTION_HARD_FLOAT,
+ OPTION_SINGLE_FLOAT,
+ OPTION_DOUBLE_FLOAT,
+ OPTION_32,
+#ifdef OBJ_ELF
+ OPTION_CALL_SHARED,
+ OPTION_CALL_NONPIC,
+ OPTION_NON_SHARED,
+ OPTION_XGOT,
+ OPTION_MABI,
+ OPTION_N32,
+ OPTION_64,
+ OPTION_MDEBUG,
+ OPTION_NO_MDEBUG,
+ OPTION_PDR,
+ OPTION_NO_PDR,
+ OPTION_MVXWORKS_PIC,
+#endif /* OBJ_ELF */
+ OPTION_END_OF_ENUM
+ };
+
struct option md_longopts[] =
{
/* Options which specify architecture. */
-#define OPTION_ARCH_BASE (OPTION_MD_BASE)
-#define OPTION_MARCH (OPTION_ARCH_BASE + 0)
{"march", required_argument, NULL, OPTION_MARCH},
-#define OPTION_MTUNE (OPTION_ARCH_BASE + 1)
{"mtune", required_argument, NULL, OPTION_MTUNE},
-#define OPTION_MIPS1 (OPTION_ARCH_BASE + 2)
{"mips0", no_argument, NULL, OPTION_MIPS1},
{"mips1", no_argument, NULL, OPTION_MIPS1},
-#define OPTION_MIPS2 (OPTION_ARCH_BASE + 3)
{"mips2", no_argument, NULL, OPTION_MIPS2},
-#define OPTION_MIPS3 (OPTION_ARCH_BASE + 4)
{"mips3", no_argument, NULL, OPTION_MIPS3},
-#define OPTION_MIPS4 (OPTION_ARCH_BASE + 5)
{"mips4", no_argument, NULL, OPTION_MIPS4},
-#define OPTION_MIPS5 (OPTION_ARCH_BASE + 6)
{"mips5", no_argument, NULL, OPTION_MIPS5},
-#define OPTION_MIPS32 (OPTION_ARCH_BASE + 7)
{"mips32", no_argument, NULL, OPTION_MIPS32},
-#define OPTION_MIPS64 (OPTION_ARCH_BASE + 8)
{"mips64", no_argument, NULL, OPTION_MIPS64},
-#define OPTION_MIPS32R2 (OPTION_ARCH_BASE + 9)
{"mips32r2", no_argument, NULL, OPTION_MIPS32R2},
-#define OPTION_MIPS64R2 (OPTION_ARCH_BASE + 10)
{"mips64r2", no_argument, NULL, OPTION_MIPS64R2},
/* Options which specify Application Specific Extensions (ASEs). */
-#define OPTION_ASE_BASE (OPTION_ARCH_BASE + 11)
-#define OPTION_MIPS16 (OPTION_ASE_BASE + 0)
{"mips16", no_argument, NULL, OPTION_MIPS16},
-#define OPTION_NO_MIPS16 (OPTION_ASE_BASE + 1)
{"no-mips16", no_argument, NULL, OPTION_NO_MIPS16},
-#define OPTION_MIPS3D (OPTION_ASE_BASE + 2)
{"mips3d", no_argument, NULL, OPTION_MIPS3D},
-#define OPTION_NO_MIPS3D (OPTION_ASE_BASE + 3)
{"no-mips3d", no_argument, NULL, OPTION_NO_MIPS3D},
-#define OPTION_MDMX (OPTION_ASE_BASE + 4)
{"mdmx", no_argument, NULL, OPTION_MDMX},
-#define OPTION_NO_MDMX (OPTION_ASE_BASE + 5)
{"no-mdmx", no_argument, NULL, OPTION_NO_MDMX},
-#define OPTION_DSP (OPTION_ASE_BASE + 6)
{"mdsp", no_argument, NULL, OPTION_DSP},
-#define OPTION_NO_DSP (OPTION_ASE_BASE + 7)
{"mno-dsp", no_argument, NULL, OPTION_NO_DSP},
-#define OPTION_MT (OPTION_ASE_BASE + 8)
{"mmt", no_argument, NULL, OPTION_MT},
-#define OPTION_NO_MT (OPTION_ASE_BASE + 9)
{"mno-mt", no_argument, NULL, OPTION_NO_MT},
-#define OPTION_SMARTMIPS (OPTION_ASE_BASE + 10)
{"msmartmips", no_argument, NULL, OPTION_SMARTMIPS},
-#define OPTION_NO_SMARTMIPS (OPTION_ASE_BASE + 11)
{"mno-smartmips", no_argument, NULL, OPTION_NO_SMARTMIPS},
-#define OPTION_DSPR2 (OPTION_ASE_BASE + 12)
{"mdspr2", no_argument, NULL, OPTION_DSPR2},
-#define OPTION_NO_DSPR2 (OPTION_ASE_BASE + 13)
{"mno-dspr2", no_argument, NULL, OPTION_NO_DSPR2},
/* Old-style architecture options. Don't add more of these. */
-#define OPTION_COMPAT_ARCH_BASE (OPTION_ASE_BASE + 14)
-#define OPTION_M4650 (OPTION_COMPAT_ARCH_BASE + 0)
{"m4650", no_argument, NULL, OPTION_M4650},
-#define OPTION_NO_M4650 (OPTION_COMPAT_ARCH_BASE + 1)
{"no-m4650", no_argument, NULL, OPTION_NO_M4650},
-#define OPTION_M4010 (OPTION_COMPAT_ARCH_BASE + 2)
{"m4010", no_argument, NULL, OPTION_M4010},
-#define OPTION_NO_M4010 (OPTION_COMPAT_ARCH_BASE + 3)
{"no-m4010", no_argument, NULL, OPTION_NO_M4010},
-#define OPTION_M4100 (OPTION_COMPAT_ARCH_BASE + 4)
{"m4100", no_argument, NULL, OPTION_M4100},
-#define OPTION_NO_M4100 (OPTION_COMPAT_ARCH_BASE + 5)
{"no-m4100", no_argument, NULL, OPTION_NO_M4100},
-#define OPTION_M3900 (OPTION_COMPAT_ARCH_BASE + 6)
{"m3900", no_argument, NULL, OPTION_M3900},
-#define OPTION_NO_M3900 (OPTION_COMPAT_ARCH_BASE + 7)
{"no-m3900", no_argument, NULL, OPTION_NO_M3900},
/* Options which enable bug fixes. */
-#define OPTION_FIX_BASE (OPTION_COMPAT_ARCH_BASE + 8)
-#define OPTION_M7000_HILO_FIX (OPTION_FIX_BASE + 0)
{"mfix7000", no_argument, NULL, OPTION_M7000_HILO_FIX},
-#define OPTION_MNO_7000_HILO_FIX (OPTION_FIX_BASE + 1)
{"no-fix-7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX},
{"mno-fix7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX},
-#define OPTION_FIX_VR4120 (OPTION_FIX_BASE + 2)
-#define OPTION_NO_FIX_VR4120 (OPTION_FIX_BASE + 3)
+ {"mfix-loongson2f-jump", no_argument, NULL, OPTION_FIX_LOONGSON2F_JUMP},
+ {"mno-fix-loongson2f-jump", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_JUMP},
+ {"mfix-loongson2f-nop", no_argument, NULL, OPTION_FIX_LOONGSON2F_NOP},
+ {"mno-fix-loongson2f-nop", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_NOP},
{"mfix-vr4120", no_argument, NULL, OPTION_FIX_VR4120},
{"mno-fix-vr4120", no_argument, NULL, OPTION_NO_FIX_VR4120},
-#define OPTION_FIX_VR4130 (OPTION_FIX_BASE + 4)
-#define OPTION_NO_FIX_VR4130 (OPTION_FIX_BASE + 5)
{"mfix-vr4130", no_argument, NULL, OPTION_FIX_VR4130},
{"mno-fix-vr4130", no_argument, NULL, OPTION_NO_FIX_VR4130},
+ {"mfix-24k", no_argument, NULL, OPTION_FIX_24K},
+ {"mno-fix-24k", no_argument, NULL, OPTION_NO_FIX_24K},
/* Miscellaneous options. */
-#define OPTION_MISC_BASE (OPTION_FIX_BASE + 6)
-#define OPTION_TRAP (OPTION_MISC_BASE + 0)
{"trap", no_argument, NULL, OPTION_TRAP},
{"no-break", no_argument, NULL, OPTION_TRAP},
-#define OPTION_BREAK (OPTION_MISC_BASE + 1)
{"break", no_argument, NULL, OPTION_BREAK},
{"no-trap", no_argument, NULL, OPTION_BREAK},
-#define OPTION_EB (OPTION_MISC_BASE + 2)
{"EB", no_argument, NULL, OPTION_EB},
-#define OPTION_EL (OPTION_MISC_BASE + 3)
{"EL", no_argument, NULL, OPTION_EL},
-#define OPTION_FP32 (OPTION_MISC_BASE + 4)
{"mfp32", no_argument, NULL, OPTION_FP32},
-#define OPTION_GP32 (OPTION_MISC_BASE + 5)
{"mgp32", no_argument, NULL, OPTION_GP32},
-#define OPTION_CONSTRUCT_FLOATS (OPTION_MISC_BASE + 6)
{"construct-floats", no_argument, NULL, OPTION_CONSTRUCT_FLOATS},
-#define OPTION_NO_CONSTRUCT_FLOATS (OPTION_MISC_BASE + 7)
{"no-construct-floats", no_argument, NULL, OPTION_NO_CONSTRUCT_FLOATS},
-#define OPTION_FP64 (OPTION_MISC_BASE + 8)
{"mfp64", no_argument, NULL, OPTION_FP64},
-#define OPTION_GP64 (OPTION_MISC_BASE + 9)
{"mgp64", no_argument, NULL, OPTION_GP64},
-#define OPTION_RELAX_BRANCH (OPTION_MISC_BASE + 10)
-#define OPTION_NO_RELAX_BRANCH (OPTION_MISC_BASE + 11)
{"relax-branch", no_argument, NULL, OPTION_RELAX_BRANCH},
{"no-relax-branch", no_argument, NULL, OPTION_NO_RELAX_BRANCH},
-#define OPTION_MSHARED (OPTION_MISC_BASE + 12)
-#define OPTION_MNO_SHARED (OPTION_MISC_BASE + 13)
{"mshared", no_argument, NULL, OPTION_MSHARED},
{"mno-shared", no_argument, NULL, OPTION_MNO_SHARED},
-#define OPTION_MSYM32 (OPTION_MISC_BASE + 14)
-#define OPTION_MNO_SYM32 (OPTION_MISC_BASE + 15)
{"msym32", no_argument, NULL, OPTION_MSYM32},
{"mno-sym32", no_argument, NULL, OPTION_MNO_SYM32},
-#define OPTION_SOFT_FLOAT (OPTION_MISC_BASE + 16)
-#define OPTION_HARD_FLOAT (OPTION_MISC_BASE + 17)
{"msoft-float", no_argument, NULL, OPTION_SOFT_FLOAT},
{"mhard-float", no_argument, NULL, OPTION_HARD_FLOAT},
-#define OPTION_SINGLE_FLOAT (OPTION_MISC_BASE + 18)
-#define OPTION_DOUBLE_FLOAT (OPTION_MISC_BASE + 19)
{"msingle-float", no_argument, NULL, OPTION_SINGLE_FLOAT},
{"mdouble-float", no_argument, NULL, OPTION_DOUBLE_FLOAT},
+
+ /* Strictly speaking this next option is ELF specific,
+ but we allow it for other ports as well in order to
+ make testing easier. */
+ {"32", no_argument, NULL, OPTION_32},
/* ELF-specific options. */
#ifdef OBJ_ELF
-#define OPTION_ELF_BASE (OPTION_MISC_BASE + 20)
-#define OPTION_CALL_SHARED (OPTION_ELF_BASE + 0)
{"KPIC", no_argument, NULL, OPTION_CALL_SHARED},
{"call_shared", no_argument, NULL, OPTION_CALL_SHARED},
-#define OPTION_CALL_NONPIC (OPTION_ELF_BASE + 1)
{"call_nonpic", no_argument, NULL, OPTION_CALL_NONPIC},
-#define OPTION_NON_SHARED (OPTION_ELF_BASE + 2)
{"non_shared", no_argument, NULL, OPTION_NON_SHARED},
-#define OPTION_XGOT (OPTION_ELF_BASE + 3)
{"xgot", no_argument, NULL, OPTION_XGOT},
-#define OPTION_MABI (OPTION_ELF_BASE + 4)
{"mabi", required_argument, NULL, OPTION_MABI},
-#define OPTION_32 (OPTION_ELF_BASE + 5)
- {"32", no_argument, NULL, OPTION_32},
-#define OPTION_N32 (OPTION_ELF_BASE + 6)
{"n32", no_argument, NULL, OPTION_N32},
-#define OPTION_64 (OPTION_ELF_BASE + 7)
{"64", no_argument, NULL, OPTION_64},
-#define OPTION_MDEBUG (OPTION_ELF_BASE + 8)
{"mdebug", no_argument, NULL, OPTION_MDEBUG},
-#define OPTION_NO_MDEBUG (OPTION_ELF_BASE + 9)
{"no-mdebug", no_argument, NULL, OPTION_NO_MDEBUG},
-#define OPTION_PDR (OPTION_ELF_BASE + 10)
{"mpdr", no_argument, NULL, OPTION_PDR},
-#define OPTION_NO_PDR (OPTION_ELF_BASE + 11)
{"mno-pdr", no_argument, NULL, OPTION_NO_PDR},
-#define OPTION_MVXWORKS_PIC (OPTION_ELF_BASE + 12)
{"mvxworks-pic", no_argument, NULL, OPTION_MVXWORKS_PIC},
#endif /* OBJ_ELF */
mips_opts.ase_smartmips = 0;
break;
+ case OPTION_FIX_24K:
+ mips_fix_24k = 1;
+ break;
+
+ case OPTION_NO_FIX_24K:
+ mips_fix_24k = 0;
+ break;
+
+ case OPTION_FIX_LOONGSON2F_JUMP:
+ mips_fix_loongson2f_jump = TRUE;
+ break;
+
+ case OPTION_NO_FIX_LOONGSON2F_JUMP:
+ mips_fix_loongson2f_jump = FALSE;
+ break;
+
+ case OPTION_FIX_LOONGSON2F_NOP:
+ mips_fix_loongson2f_nop = TRUE;
+ break;
+
+ case OPTION_NO_FIX_LOONGSON2F_NOP:
+ mips_fix_loongson2f_nop = FALSE;
+ break;
+
case OPTION_FIX_VR4120:
mips_fix_vr4120 = 1;
break;
g_switch_seen = 1;
break;
-#ifdef OBJ_ELF
/* The -32, -n32 and -64 options are shortcuts for -mabi=32, -mabi=n32
and -mabi=64. */
case OPTION_32:
- if (!IS_ELF)
- {
- as_bad (_("-32 is supported for ELF format only"));
- return 0;
- }
- mips_abi = O32_ABI;
+ if (IS_ELF)
+ mips_abi = O32_ABI;
+ /* We silently ignore -32 for non-ELF targets. This greatly
+ simplifies the construction of the MIPS GAS test cases. */
break;
+#ifdef OBJ_ELF
case OPTION_N32:
if (!IS_ELF)
{
return 0;
}
+ mips_fix_loongson2f = mips_fix_loongson2f_nop || mips_fix_loongson2f_jump;
+
return 1;
}
\f
arch_info = mips_parse_cpu ("default CPU", MIPS_CPU_STRING_DEFAULT);
if (ABI_NEEDS_64BIT_REGS (mips_abi) && !ISA_HAS_64BIT_REGS (arch_info->isa))
- as_bad ("-march=%s is not compatible with the selected ABI",
+ as_bad (_("-march=%s is not compatible with the selected ABI"),
arch_info->name);
mips_set_architecture (arch_info);
if (mips_opts.ase_smartmips == -1)
mips_opts.ase_smartmips = (arch_info->flags & MIPS_CPU_ASE_SMARTMIPS) ? 1 : 0;
if (mips_opts.ase_smartmips && !ISA_SUPPORTS_SMARTMIPS)
- as_warn ("%s ISA does not support SmartMIPS",
- mips_cpu_info_from_isa (mips_opts.isa)->name);
+ as_warn (_("%s ISA does not support SmartMIPS"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
if (mips_opts.ase_dsp == -1)
mips_opts.ase_dsp = (arch_info->flags & MIPS_CPU_ASE_DSP) ? 1 : 0;
if (mips_opts.ase_dsp && !ISA_SUPPORTS_DSP_ASE)
- as_warn ("%s ISA does not support DSP ASE",
- mips_cpu_info_from_isa (mips_opts.isa)->name);
+ as_warn (_("%s ISA does not support DSP ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
if (mips_opts.ase_dspr2 == -1)
{
mips_opts.ase_dsp = (arch_info->flags & MIPS_CPU_ASE_DSP) ? 1 : 0;
}
if (mips_opts.ase_dspr2 && !ISA_SUPPORTS_DSPR2_ASE)
- as_warn ("%s ISA does not support DSP R2 ASE",
- mips_cpu_info_from_isa (mips_opts.isa)->name);
+ as_warn (_("%s ISA does not support DSP R2 ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
if (mips_opts.ase_mt == -1)
mips_opts.ase_mt = (arch_info->flags & MIPS_CPU_ASE_MT) ? 1 : 0;
if (mips_opts.ase_mt && !ISA_SUPPORTS_MT_ASE)
- as_warn ("%s ISA does not support MT ASE",
- mips_cpu_info_from_isa (mips_opts.isa)->name);
+ as_warn (_("%s ISA does not support MT ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
file_mips_isa = mips_opts.isa;
file_ase_mips16 = mips_opts.mips16;
bfd_boolean matched_lo_p;
fixS **hi_pos, **lo_pos, **pos;
- assert (reloc_needs_lo_p (l->fixp->fx_r_type));
+ gas_assert (reloc_needs_lo_p (l->fixp->fx_r_type));
/* If a GOT16 relocation turns out to be against a global symbol,
there isn't supposed to be a matching LO. */
hi_pos = pos;
if ((*pos)->fx_r_type == looking_for_rtype
- && (*pos)->fx_addsy == l->fixp->fx_addsy
+ && symbol_same_p ((*pos)->fx_addsy, l->fixp->fx_addsy)
&& (*pos)->fx_offset >= l->fixp->fx_offset
&& (lo_pos == NULL
|| (*pos)->fx_offset < (*lo_pos)->fx_offset
if (! howto)
return;
- assert (fixP->fx_size == 4
+ gas_assert (fixP->fx_size == 4
|| fixP->fx_r_type == BFD_RELOC_16
|| fixP->fx_r_type == BFD_RELOC_64
|| fixP->fx_r_type == BFD_RELOC_CTOR
buf = (bfd_byte *) (fixP->fx_frag->fr_literal + fixP->fx_where);
- assert (!fixP->fx_pcrel || fixP->fx_r_type == BFD_RELOC_16_PCREL_S2);
+ gas_assert (!fixP->fx_pcrel || fixP->fx_r_type == BFD_RELOC_16_PCREL_S2);
/* Don't treat parts of a composite relocation as done. There are two
reasons for this:
record_alignment (now_seg, to);
if (label != NULL)
{
- assert (S_GET_SEGMENT (label) == now_seg);
+ gas_assert (S_GET_SEGMENT (label) == now_seg);
symbol_set_frag (label, frag_now);
S_SET_VALUE (label, (valueT) frag_now_fix ());
}
#endif
mips_emit_delays ();
+
switch (sec)
{
case 't':
section_alignment = get_absolute_expression ();
else
section_alignment = 0;
+ /* FIXME: really ignore? */
+ (void) section_alignment;
section_name = xstrdup (section_name);
else if (strcmp (name, "gp=64") == 0)
{
if (!ISA_HAS_64BIT_REGS (mips_opts.isa))
- as_warn ("%s isa does not support 64-bit registers",
+ as_warn (_("%s isa does not support 64-bit registers"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
mips_opts.gp32 = 0;
}
else if (strcmp (name, "fp=64") == 0)
{
if (!ISA_HAS_64BIT_FPRS (mips_opts.isa))
- as_warn ("%s isa does not support 64-bit floating point registers",
+ as_warn (_("%s isa does not support 64-bit floating point registers"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
mips_opts.fp32 = 0;
}
else if (strcmp (name, "smartmips") == 0)
{
if (!ISA_SUPPORTS_SMARTMIPS)
- as_warn ("%s ISA does not support SmartMIPS ASE",
+ as_warn (_("%s ISA does not support SmartMIPS ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
mips_opts.ase_smartmips = 1;
}
else if (strcmp (name, "dsp") == 0)
{
if (!ISA_SUPPORTS_DSP_ASE)
- as_warn ("%s ISA does not support DSP ASE",
+ as_warn (_("%s ISA does not support DSP ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
mips_opts.ase_dsp = 1;
mips_opts.ase_dspr2 = 0;
else if (strcmp (name, "dspr2") == 0)
{
if (!ISA_SUPPORTS_DSPR2_ASE)
- as_warn ("%s ISA does not support DSP R2 ASE",
+ as_warn (_("%s ISA does not support DSP R2 ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
mips_opts.ase_dspr2 = 1;
mips_opts.ase_dsp = 1;
else if (strcmp (name, "mt") == 0)
{
if (!ISA_SUPPORTS_MT_ASE)
- as_warn ("%s ISA does not support MT ASE",
+ as_warn (_("%s ISA does not support MT ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
mips_opts.ase_mt = 1;
}
{
if (S_IS_DEFINED (symbolP))
{
- as_bad ("ignoring attempt to redefine symbol %s",
+ as_bad (_("ignoring attempt to redefine symbol %s"),
S_GET_NAME (symbolP));
ignore_rest_of_line ();
return;
expression (&exp);
if (exp.X_op != O_symbol)
{
- as_bad ("bad .weakext directive");
+ as_bad (_("bad .weakext directive"));
ignore_rest_of_line ();
return;
}
const char *segname;
segname = segment_name (S_GET_SEGMENT (sym));
- assert (strcmp (segname, ".lit8") != 0
+ gas_assert (strcmp (segname, ".lit8") != 0
&& strcmp (segname, ".lit4") != 0);
change = (strcmp (segname, ".sdata") != 0
&& strcmp (segname, ".sbss") != 0
while (op->type != type)
{
++op;
- assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
+ gas_assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
}
if (op->unsp)
&& (S_GET_SEGMENT (fixp->fx_addsy)->flags & SEC_MERGE) != 0)
return 0;
+ /* There is no place to store an in-place offset for JALR relocations. */
+ if (fixp->fx_r_type == BFD_RELOC_MIPS_JALR && HAVE_IN_PLACE_ADDENDS)
+ return 0;
+
#ifdef OBJ_ELF
/* R_MIPS16_26 relocations against non-MIPS16 functions might resolve
to a floating-point stub. The same is true for non-R_MIPS16_26
if (fixp->fx_pcrel)
{
- assert (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2);
+ gas_assert (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2);
/* At this point, fx_addnumber is "symbol offset - pcrel address".
Relocations want only the symbol offset. */
/* bc[0-3][tf]l? and bc1any[24][ft] instructions can
have the condition reversed by tweaking a single
bit, and their opcodes all have 0x4???????. */
- assert ((insn & 0xf1000000) == 0x41000000);
+ gas_assert ((insn & 0xf1000000) == 0x41000000);
insn ^= 0x00010000;
break;
case 0:
/* bltz 0x04000000 bgez 0x04010000
bltzal 0x04100000 bgezal 0x04110000 */
- assert ((insn & 0xfc0e0000) == 0x04000000);
+ gas_assert ((insn & 0xfc0e0000) == 0x04000000);
insn ^= 0x00010000;
break;
if (RELAX_BRANCH_LINK (fragp->fr_subtype))
{
/* Clear the and-link bit. */
- assert ((insn & 0xfc1c0000) == 0x04100000);
+ gas_assert ((insn & 0xfc1c0000) == 0x04100000);
/* bltzal 0x04100000 bgezal 0x04110000
bltzall 0x04120000 bgezall 0x04130000 */
}
}
- assert (buf == (bfd_byte *)fragp->fr_literal
+ gas_assert (buf == (bfd_byte *)fragp->fr_literal
+ fragp->fr_fix + fragp->fr_var);
fragp->fr_fix += fragp->fr_var;
{
const char *msg = macro_warning (fragp->fr_subtype);
if (msg != 0)
- as_warn_where (fragp->fr_file, fragp->fr_line, msg);
+ as_warn_where (fragp->fr_file, fragp->fr_line, "%s", msg);
}
/* Go through all the fixups for the first sequence. Disable them
mips_handle_align (fragS *fragp)
{
char *p;
+ int bytes, size, excess;
+ valueT opcode;
if (fragp->fr_type != rs_align_code)
return;
p = fragp->fr_literal + fragp->fr_fix;
if (*p)
{
- int bytes;
+ opcode = mips16_nop_insn.insn_opcode;
+ size = 2;
+ }
+ else
+ {
+ opcode = nop_insn.insn_opcode;
+ size = 4;
+ }
- bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix;
- if (bytes & 1)
- {
- *p++ = 0;
- fragp->fr_fix++;
- }
- md_number_to_chars (p, mips16_nop_insn.insn_opcode, 2);
- fragp->fr_var = 2;
+ bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix;
+ excess = bytes % size;
+ if (excess != 0)
+ {
+ /* If we're not inserting a whole number of instructions,
+ pad the end of the fixed part of the frag with zeros. */
+ memset (p, 0, excess);
+ p += excess;
+ fragp->fr_fix += excess;
}
+
+ md_number_to_chars (p, opcode, size);
+ fragp->fr_var = size;
}
static void
if (p != NULL)
{
- assert (S_GET_NAME (p));
+ gas_assert (S_GET_NAME (p));
if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->func_sym)))
as_warn (_(".end symbol does not match .ent symbol."));
{
segT saved_seg = now_seg;
subsegT saved_subseg = now_subseg;
- valueT dot;
expressionS exp;
char *fragp;
- dot = frag_now_fix ();
-
#ifdef md_flush_pending_output
md_flush_pending_output ();
#endif
- assert (pdr_seg);
+ gas_assert (pdr_seg);
subseg_set (pdr_seg, 0);
/* Write the symbol. */
cur_proc_ptr->func_sym = symbolP;
- symbol_get_bfdsym (symbolP)->flags |= BSF_FUNCTION;
-
++numprocs;
if (debug_type == DEBUG_STABS)
S_GET_NAME (symbolP));
}
+ symbol_get_bfdsym (symbolP)->flags |= BSF_FUNCTION;
+
demand_empty_rest_of_line ();
}
{ "r8000", 0, ISA_MIPS4, CPU_R8000 },
{ "r10000", 0, ISA_MIPS4, CPU_R10000 },
{ "r12000", 0, ISA_MIPS4, CPU_R12000 },
+ { "r14000", 0, ISA_MIPS4, CPU_R14000 },
+ { "r16000", 0, ISA_MIPS4, CPU_R16000 },
{ "vr5000", 0, ISA_MIPS4, CPU_R5000 },
{ "vr5400", 0, ISA_MIPS4, CPU_VR5400 },
{ "vr5500", 0, ISA_MIPS4, CPU_VR5500 },
ISA_MIPS32R2, CPU_MIPS32R2 },
{ "74kx", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* 1004K cores are multiprocessor versions of the 34K. */
+ { "1004kc", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
+ ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "1004kf2_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
+ ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "1004kf", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
+ ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "1004kf1_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
+ ISA_MIPS32R2, CPU_MIPS32R2 },
/* MIPS 64 */
{ "5kc", 0, ISA_MIPS64, CPU_MIPS64 },
{ "20kc", MIPS_CPU_ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 },
{ "25kf", MIPS_CPU_ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 },
- /* MIPS 64 Release 2 */
-
/* Broadcom SB-1 CPU core */
{ "sb1", MIPS_CPU_ASE_MIPS3D | MIPS_CPU_ASE_MDMX,
ISA_MIPS64, CPU_SB1 },
{ "sb1a", MIPS_CPU_ASE_MIPS3D | MIPS_CPU_ASE_MDMX,
ISA_MIPS64, CPU_SB1 },
+ /* MIPS 64 Release 2 */
+
/* Cavium Networks Octeon CPU core */
{ "octeon", 0, ISA_MIPS64R2, CPU_OCTEON },
+ /* RMI Xlr */
+ { "xlr", 0, ISA_MIPS64, CPU_XLR },
+
/* End marker */
{ NULL, 0, 0, 0 }
};
if (mips_matching_cpu_name_p (p->name, cpu_string))
return p;
- as_bad ("Bad value (%s) for %s", cpu_string, option);
+ as_bad (_("Bad value (%s) for %s"), cpu_string, option);
return 0;
}
-mmt generate MT instructions\n\
-mno-mt do not generate MT instructions\n"));
fprintf (stream, _("\
+-mfix-loongson2f-jump work around Loongson2F JUMP instructions\n\
+-mfix-loongson2f-nop work around Loongson2F NOP errata\n\
-mfix-vr4120 work around certain VR4120 errata\n\
-mfix-vr4130 work around VR4130 mflo/mfhi errata\n\
+-mfix-24k insert a nop after ERET and DERET instructions\n\
-mgp32 use 32-bit GPRs, regardless of the chosen ISA\n\
-mfp32 use 32-bit FPRs, regardless of the chosen ISA\n\
-msym32 assume all symbols have 32-bit values\n\
#endif
}
+#ifdef TE_IRIX
enum dwarf2_format
mips_dwarf2_format (asection *sec ATTRIBUTE_UNUSED)
{
if (HAVE_64BIT_SYMBOLS)
- {
-#ifdef TE_IRIX
- return dwarf2_format_64bit_irix;
-#else
- return dwarf2_format_64bit;
-#endif
- }
+ return dwarf2_format_64bit_irix;
else
return dwarf2_format_32bit;
}
+#endif
int
mips_dwarf2_addr_size (void)
{
- if (HAVE_64BIT_SYMBOLS)
+ if (HAVE_64BIT_OBJECTS)
return 8;
else
return 4;