/* tc-mips.c -- assemble code for a MIPS chip.
Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
- 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+ 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
#define ZERO 0
#define ATREG 1
+#define S0 16
+#define S7 23
#define TREG 24
#define PIC_CALL_REG 25
#define KT0 26
? ".rodata" \
: (abort (), ""))
+/* Ways in which an instruction can be "appended" to the output. */
+enum append_method {
+ /* Just add it normally. */
+ APPEND_ADD,
+
+ /* Add it normally and then add a nop. */
+ APPEND_ADD_WITH_NOP,
+
+ /* Turn an instruction with a delay slot into a "compact" version. */
+ APPEND_ADD_COMPACT,
+
+ /* Insert the instruction before the last one. */
+ APPEND_SWAP
+};
+
/* Information about an instruction, including its format, operands
and fixups. */
struct mips_cl_insn
/* The opcode's entry in mips_opcodes or mips16_opcodes. */
const struct mips_opcode *insn_mo;
- /* True if this is a mips16 instruction and if we want the extended
- form of INSN_MO. */
- bfd_boolean use_extend;
-
- /* The 16-bit extension instruction to use when USE_EXTEND is true. */
- unsigned short extend;
-
/* The 16-bit or 32-bit bitstring of the instruction itself. This is
- a copy of INSN_MO->match with the operands filled in. */
+ a copy of INSN_MO->match with the operands filled in. If we have
+ decided to use an extended MIPS16 instruction, this includes the
+ extension. */
unsigned long insn_opcode;
/* The frag that contains the instruction. */
/* True if this instruction is complete. */
unsigned int complete_p : 1;
+
+ /* True if this instruction is cleared from history by unconditional
+ branch. */
+ unsigned int cleared_p : 1;
};
/* The ABI to use. */
if it has not been initialized. Changed by `.set mipsN', and the
-mipsN command line option, and the default CPU. */
int isa;
- /* Enabled Application Specific Extensions (ASEs). These are set to -1
- if they have not been initialized. Changed by `.set <asename>', by
- command line options, and based on the default architecture. */
- int ase_mips3d;
- int ase_mdmx;
- int ase_smartmips;
- int ase_dsp;
- int ase_dspr2;
- int ase_mt;
+ /* Enabled Application Specific Extensions (ASEs). Changed by `.set
+ <asename>', by command line options, and based on the default
+ architecture. */
+ int ase;
/* Whether we are assembling for the mips16 processor. 0 if we are
not, 1 if we are, and -1 if the value has not been initialized.
Changed by `.set mips16' and `.set nomips16', and the -mips16 and
-nomips16 command line options, and the default CPU. */
int mips16;
+ /* Whether we are assembling for the mipsMIPS ASE. 0 if we are not,
+ 1 if we are, and -1 if the value has not been initialized. Changed
+ by `.set micromips' and `.set nomicromips', and the -mmicromips
+ and -mno-micromips command line options, and the default CPU. */
+ int micromips;
/* Non-zero if we should not reorder instructions. Changed by `.set
reorder' and `.set noreorder'. */
int noreorder;
static struct mips_set_options mips_opts =
{
- /* isa */ ISA_UNKNOWN, /* ase_mips3d */ -1, /* ase_mdmx */ -1,
- /* ase_smartmips */ 0, /* ase_dsp */ -1, /* ase_dspr2 */ -1, /* ase_mt */ -1,
- /* mips16 */ -1, /* noreorder */ 0, /* at */ ATREG,
- /* warn_about_macros */ 0, /* nomove */ 0, /* nobopt */ 0,
- /* noautoextend */ 0, /* gp32 */ 0, /* fp32 */ 0, /* arch */ CPU_UNKNOWN,
- /* sym32 */ FALSE, /* soft_float */ FALSE, /* single_float */ FALSE
+ /* isa */ ISA_UNKNOWN, /* ase */ 0, /* mips16 */ -1, /* micromips */ -1,
+ /* noreorder */ 0, /* at */ ATREG, /* warn_about_macros */ 0,
+ /* nomove */ 0, /* nobopt */ 0, /* noautoextend */ 0, /* gp32 */ 0,
+ /* fp32 */ 0, /* arch */ CPU_UNKNOWN, /* sym32 */ FALSE,
+ /* soft_float */ FALSE, /* single_float */ FALSE
};
+/* The set of ASEs that were selected on the command line, either
+ explicitly via ASE options or implicitly through things like -march. */
+static unsigned int file_ase;
+
+/* Which bits of file_ase were explicitly set or cleared by ASE options. */
+static unsigned int file_ase_explicit;
+
/* These variables are filled in with the masks of registers used.
The object format code reads them and puts them in the appropriate
place. */
|| mips_opts.isa == ISA_MIPS64 \
|| mips_opts.isa == ISA_MIPS64R2)
+/* True if any microMIPS code was produced. */
+static int file_ase_micromips;
+
/* True if we want to create R_MIPS_JALR for jalr $25. */
#ifdef TE_IRIX
#define MIPS_JALR_HINT_P(EXPR) HAVE_NEWABI
|| ((EXPR)->X_op == O_symbol && (EXPR)->X_add_number == 0))
#endif
-/* True if -mips3d was passed or implied by arguments passed on the
- command line (e.g., by -march). */
-static int file_ase_mips3d;
-
-/* True if -mdmx was passed or implied by arguments passed on the
- command line (e.g., by -march). */
-static int file_ase_mdmx;
-
-/* True if -msmartmips was passed or implied by arguments passed on the
- command line (e.g., by -march). */
-static int file_ase_smartmips;
-
#define ISA_SUPPORTS_SMARTMIPS (mips_opts.isa == ISA_MIPS32 \
|| mips_opts.isa == ISA_MIPS32R2)
-/* True if -mdsp was passed or implied by arguments passed on the
- command line (e.g., by -march). */
-static int file_ase_dsp;
-
#define ISA_SUPPORTS_DSP_ASE (mips_opts.isa == ISA_MIPS32R2 \
- || mips_opts.isa == ISA_MIPS64R2)
+ || mips_opts.isa == ISA_MIPS64R2 \
+ || mips_opts.micromips)
#define ISA_SUPPORTS_DSP64_ASE (mips_opts.isa == ISA_MIPS64R2)
-/* True if -mdspr2 was passed or implied by arguments passed on the
- command line (e.g., by -march). */
-static int file_ase_dspr2;
-
#define ISA_SUPPORTS_DSPR2_ASE (mips_opts.isa == ISA_MIPS32R2 \
- || mips_opts.isa == ISA_MIPS64R2)
+ || mips_opts.isa == ISA_MIPS64R2 \
+ || mips_opts.micromips)
-/* True if -mmt was passed or implied by arguments passed on the
- command line (e.g., by -march). */
-static int file_ase_mt;
+#define ISA_SUPPORTS_EVA_ASE (mips_opts.isa == ISA_MIPS32R2 \
+ || mips_opts.isa == ISA_MIPS64R2 \
+ || mips_opts.micromips)
#define ISA_SUPPORTS_MT_ASE (mips_opts.isa == ISA_MIPS32R2 \
|| mips_opts.isa == ISA_MIPS64R2)
+#define ISA_SUPPORTS_MCU_ASE (mips_opts.isa == ISA_MIPS32R2 \
+ || mips_opts.isa == ISA_MIPS64R2 \
+ || mips_opts.micromips)
+
+#define ISA_SUPPORTS_VIRT_ASE (mips_opts.isa == ISA_MIPS32R2 \
+ || mips_opts.isa == ISA_MIPS64R2 \
+ || mips_opts.micromips)
+
+#define ISA_SUPPORTS_VIRT64_ASE (mips_opts.isa == ISA_MIPS64R2 \
+ || (mips_opts.micromips \
+ && ISA_HAS_64BIT_REGS (mips_opts.isa)))
+
/* The argument of the -march= flag. The architecture we are assembling. */
static int file_mips_arch = CPU_UNKNOWN;
static const char *mips_arch_string;
/* Return true if ISA supports 64-bit right rotate (dror et al.)
instructions. */
#define ISA_HAS_DROR(ISA) \
- ((ISA) == ISA_MIPS64R2)
+ ((ISA) == ISA_MIPS64R2 \
+ || (mips_opts.micromips \
+ && ISA_HAS_64BIT_REGS (ISA)) \
+ )
/* Return true if ISA supports 32-bit right rotate (ror et al.)
instructions. */
#define ISA_HAS_ROR(ISA) \
((ISA) == ISA_MIPS32R2 \
|| (ISA) == ISA_MIPS64R2 \
- || mips_opts.ase_smartmips)
+ || (mips_opts.ase & ASE_SMARTMIPS) \
+ || mips_opts.micromips \
+ )
/* Return true if ISA supports single-precision floats in odd registers. */
#define ISA_HAS_ODD_SINGLE_FPR(ISA) \
(strncmp (TARGET_CPU, "mips16", sizeof ("mips16") - 1) == 0 \
|| strncmp (TARGET_CANONICAL, "mips-lsi-elf", sizeof ("mips-lsi-elf") - 1) == 0)
+/* Return true if the given CPU supports the microMIPS ASE. */
+#define CPU_HAS_MICROMIPS(cpu) 0
+
/* True if CPU has a dror instruction. */
#define CPU_HAS_DROR(CPU) ((CPU) == CPU_VR5400 || (CPU) == CPU_VR5500)
/* True if CPU has a ror instruction. */
#define CPU_HAS_ROR(CPU) CPU_HAS_DROR (CPU)
+/* True if CPU is in the Octeon family */
+#define CPU_IS_OCTEON(CPU) ((CPU) == CPU_OCTEON || (CPU) == CPU_OCTEONP || (CPU) == CPU_OCTEON2)
+
/* True if CPU has seq/sne and seqi/snei instructions. */
-#define CPU_HAS_SEQ(CPU) ((CPU) == CPU_OCTEON)
+#define CPU_HAS_SEQ(CPU) (CPU_IS_OCTEON (CPU))
-/* True if CPU does not implement the all the coprocessor insns. For these
- CPUs only those COP insns are accepted that are explicitly marked to be
- available on the CPU. ISA membership for COP insns is ignored. */
-#define NO_ISA_COP(CPU) ((CPU) == CPU_OCTEON)
+/* True, if CPU has support for ldc1 and sdc1. */
+#define CPU_HAS_LDC1_SDC1(CPU) \
+ ((mips_opts.isa != ISA_MIPS1) && ((CPU) != CPU_R5900))
/* True if mflo and mfhi can be immediately followed by instructions
which write to the HI and LO registers.
|| mips_opts.isa == ISA_MIPS64 \
|| mips_opts.isa == ISA_MIPS64R2 \
|| mips_opts.arch == CPU_R4010 \
+ || mips_opts.arch == CPU_R5900 \
|| mips_opts.arch == CPU_R10000 \
|| mips_opts.arch == CPU_R12000 \
|| mips_opts.arch == CPU_R14000 \
|| mips_opts.arch == CPU_R16000 \
|| mips_opts.arch == CPU_RM7000 \
|| mips_opts.arch == CPU_VR5500 \
+ || mips_opts.micromips \
)
/* Whether the processor uses hardware interlocks to protect reads
from the GPRs after they are loaded from memory, and thus does not
require nops to be inserted. This applies to instructions marked
INSN_LOAD_MEMORY_DELAY. These nops are only required at MIPS ISA
- level I. */
-#define gpr_interlocks \
- (mips_opts.isa != ISA_MIPS1 \
- || mips_opts.arch == CPU_R3900)
+ level I and microMIPS mode instructions are always interlocked. */
+#define gpr_interlocks \
+ (mips_opts.isa != ISA_MIPS1 \
+ || mips_opts.arch == CPU_R3900 \
+ || mips_opts.arch == CPU_R5900 \
+ || mips_opts.micromips \
+ )
/* Whether the processor uses hardware interlocks to avoid delays
required by coprocessor instructions, and thus does not require
INSN_LOAD_COPROC_DELAY, INSN_COPROC_MOVE_DELAY, and to delays
between instructions marked INSN_WRITE_COND_CODE and ones marked
INSN_READ_COND_CODE. These nops are only required at MIPS ISA
- levels I, II, and III. */
+ levels I, II, and III and microMIPS mode instructions are always
+ interlocked. */
/* Itbl support may require additional care here. */
#define cop_interlocks \
((mips_opts.isa != ISA_MIPS1 \
&& mips_opts.isa != ISA_MIPS2 \
&& mips_opts.isa != ISA_MIPS3) \
|| mips_opts.arch == CPU_R4300 \
+ || mips_opts.micromips \
)
/* Whether the processor uses hardware interlocks to protect reads
from coprocessor registers after they are loaded from memory, and
thus does not require nops to be inserted. This applies to
instructions marked INSN_COPROC_MEMORY_DELAY. These nops are only
- requires at MIPS ISA level I. */
-#define cop_mem_interlocks (mips_opts.isa != ISA_MIPS1)
+ requires at MIPS ISA level I and microMIPS mode instructions are
+ always interlocked. */
+#define cop_mem_interlocks \
+ (mips_opts.isa != ISA_MIPS1 \
+ || mips_opts.micromips \
+ )
/* Is this a mfhi or mflo instruction? */
#define MF_HILO_INSN(PINFO) \
((PINFO & INSN_READ_HI) || (PINFO & INSN_READ_LO))
-/* Returns true for a (non floating-point) coprocessor instruction. Reading
- or writing the condition code is only possible on the coprocessors and
- these insns are not marked with INSN_COP. Thus for these insns use the
- condition-code flags. */
-#define COP_INSN(PINFO) \
- (PINFO != INSN_MACRO \
- && ((PINFO) & (FP_S | FP_D)) == 0 \
- && ((PINFO) & (INSN_COP | INSN_READ_COND_CODE | INSN_WRITE_COND_CODE)))
+/* Whether code compression (either of the MIPS16 or the microMIPS ASEs)
+ has been selected. This implies, in particular, that addresses of text
+ labels have their LSB set. */
+#define HAVE_CODE_COMPRESSION \
+ ((mips_opts.mips16 | mips_opts.micromips) != 0)
/* MIPS PIC level. */
/* The opcode hash table we use for the mips16. */
static struct hash_control *mips16_op_hash = NULL;
+/* The opcode hash table we use for the microMIPS ASE. */
+static struct hash_control *micromips_op_hash = NULL;
+
/* This array holds the chars that always start a comment. If the
pre-processor is disabled, these aren't very useful */
const char comment_chars[] = "#";
static struct mips_cl_insn history[1 + MAX_NOPS];
/* Nop instructions used by emit_nop. */
-static struct mips_cl_insn nop_insn, mips16_nop_insn;
+static struct mips_cl_insn nop_insn;
+static struct mips_cl_insn mips16_nop_insn;
+static struct mips_cl_insn micromips_nop16_insn;
+static struct mips_cl_insn micromips_nop32_insn;
/* The appropriate nop for the current mode. */
-#define NOP_INSN (mips_opts.mips16 ? &mips16_nop_insn : &nop_insn)
+#define NOP_INSN (mips_opts.mips16 ? &mips16_nop_insn \
+ : (mips_opts.micromips ? µmips_nop16_insn : &nop_insn))
+
+/* The size of NOP_INSN in bytes. */
+#define NOP_INSN_SIZE (HAVE_CODE_COMPRESSION ? 2 : 4)
/* If this is set, it points to a frag holding nop instructions which
were inserted before the start of a noreorder section. If those
16, 17, 2, 3, 4, 5, 6, 7
};
+/* Map normal MIPS register numbers to microMIPS register numbers. */
+
+#define mips32_to_micromips_reg_b_map mips32_to_16_reg_map
+#define mips32_to_micromips_reg_c_map mips32_to_16_reg_map
+#define mips32_to_micromips_reg_d_map mips32_to_16_reg_map
+#define mips32_to_micromips_reg_e_map mips32_to_16_reg_map
+#define mips32_to_micromips_reg_f_map mips32_to_16_reg_map
+#define mips32_to_micromips_reg_g_map mips32_to_16_reg_map
+#define mips32_to_micromips_reg_l_map mips32_to_16_reg_map
+
+#define X ILLEGAL_REG
+/* reg type h: 4, 5, 6. */
+static const int mips32_to_micromips_reg_h_map[] =
+{
+ X, X, X, X, 4, 5, 6, X,
+ X, X, X, X, X, X, X, X,
+ X, X, X, X, X, X, X, X,
+ X, X, X, X, X, X, X, X
+};
+
+/* reg type m: 0, 17, 2, 3, 16, 18, 19, 20. */
+static const int mips32_to_micromips_reg_m_map[] =
+{
+ 0, X, 2, 3, X, X, X, X,
+ X, X, X, X, X, X, X, X,
+ 4, 1, 5, 6, 7, X, X, X,
+ X, X, X, X, X, X, X, X
+};
+
+/* reg type q: 0, 2-7. 17. */
+static const int mips32_to_micromips_reg_q_map[] =
+{
+ 0, X, 2, 3, 4, 5, 6, 7,
+ X, X, X, X, X, X, X, X,
+ X, 1, X, X, X, X, X, X,
+ X, X, X, X, X, X, X, X
+};
+
+#define mips32_to_micromips_reg_n_map mips32_to_micromips_reg_m_map
+#undef X
+
+/* Map microMIPS register numbers to normal MIPS register numbers. */
+
+#define micromips_to_32_reg_b_map mips16_to_32_reg_map
+#define micromips_to_32_reg_c_map mips16_to_32_reg_map
+#define micromips_to_32_reg_d_map mips16_to_32_reg_map
+#define micromips_to_32_reg_e_map mips16_to_32_reg_map
+#define micromips_to_32_reg_f_map mips16_to_32_reg_map
+#define micromips_to_32_reg_g_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type h. */
+static const unsigned int micromips_to_32_reg_h_map[] =
+{
+ 5, 5, 6, 4, 4, 4, 4, 4
+};
+
+/* The microMIPS registers with type i. */
+static const unsigned int micromips_to_32_reg_i_map[] =
+{
+ 6, 7, 7, 21, 22, 5, 6, 7
+};
+
+#define micromips_to_32_reg_l_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type m. */
+static const unsigned int micromips_to_32_reg_m_map[] =
+{
+ 0, 17, 2, 3, 16, 18, 19, 20
+};
+
+#define micromips_to_32_reg_n_map micromips_to_32_reg_m_map
+
+/* The microMIPS registers with type q. */
+static const unsigned int micromips_to_32_reg_q_map[] =
+{
+ 0, 17, 2, 3, 4, 5, 6, 7
+};
+
+/* microMIPS imm type B. */
+static const int micromips_imm_b_map[] =
+{
+ 1, 4, 8, 12, 16, 20, 24, -1
+};
+
+/* microMIPS imm type C. */
+static const int micromips_imm_c_map[] =
+{
+ 128, 1, 2, 3, 4, 7, 8, 15, 16, 31, 32, 63, 64, 255, 32768, 65535
+};
+
/* Classifies the kind of instructions we're interested in when
implementing -mfix-vr4120. */
enum fix_vr4120_class
Like RELAX_NOMACRO, but indicates that the macro appears in a branch
delay slot.
+ RELAX_DELAY_SLOT_16BIT
+ Like RELAX_DELAY_SLOT, but indicates that the delay slot requires a
+ 16-bit instruction.
+
+ RELAX_DELAY_SLOT_SIZE_FIRST
+ Like RELAX_DELAY_SLOT, but indicates that the first implementation of
+ the macro is of the wrong size for the branch delay slot.
+
+ RELAX_DELAY_SLOT_SIZE_SECOND
+ Like RELAX_DELAY_SLOT, but indicates that the second implementation of
+ the macro is of the wrong size for the branch delay slot.
+
The frag's "opcode" points to the first fixup for relaxable code.
Relaxable macros are generated using a sequence such as:
#define RELAX_SECOND_LONGER 0x20000
#define RELAX_NOMACRO 0x40000
#define RELAX_DELAY_SLOT 0x80000
+#define RELAX_DELAY_SLOT_16BIT 0x100000
+#define RELAX_DELAY_SLOT_SIZE_FIRST 0x200000
+#define RELAX_DELAY_SLOT_SIZE_SECOND 0x400000
/* Branch without likely bit. If label is out of range, we turn:
#define RELAX_MIPS16_MARK_LONG_BRANCH(i) ((i) | 0x2000)
#define RELAX_MIPS16_CLEAR_LONG_BRANCH(i) ((i) &~ 0x2000)
+/* For microMIPS code, we use relaxation similar to one we use for
+ MIPS16 code. Some instructions that take immediate values support
+ two encodings: a small one which takes some small value, and a
+ larger one which takes a 16 bit value. As some branches also follow
+ this pattern, relaxing these values is required.
+
+ We can assemble both microMIPS and normal MIPS code in a single
+ object. Therefore, we need to support this type of relaxation at
+ the same time that we support the relaxation described above. We
+ use one of the high bits of the subtype field to distinguish these
+ cases.
+
+ The information we store for this type of relaxation is the argument
+ code found in the opcode file for this relocation, the register
+ selected as the assembler temporary, whether the branch is
+ unconditional, whether it is compact, whether it stores the link
+ address implicitly in $ra, whether relaxation of out-of-range 32-bit
+ branches to a sequence of instructions is enabled, and whether the
+ displacement of a branch is too large to fit as an immediate argument
+ of a 16-bit and a 32-bit branch, respectively. */
+#define RELAX_MICROMIPS_ENCODE(type, at, uncond, compact, link, \
+ relax32, toofar16, toofar32) \
+ (0x40000000 \
+ | ((type) & 0xff) \
+ | (((at) & 0x1f) << 8) \
+ | ((uncond) ? 0x2000 : 0) \
+ | ((compact) ? 0x4000 : 0) \
+ | ((link) ? 0x8000 : 0) \
+ | ((relax32) ? 0x10000 : 0) \
+ | ((toofar16) ? 0x20000 : 0) \
+ | ((toofar32) ? 0x40000 : 0))
+#define RELAX_MICROMIPS_P(i) (((i) & 0xc0000000) == 0x40000000)
+#define RELAX_MICROMIPS_TYPE(i) ((i) & 0xff)
+#define RELAX_MICROMIPS_AT(i) (((i) >> 8) & 0x1f)
+#define RELAX_MICROMIPS_UNCOND(i) (((i) & 0x2000) != 0)
+#define RELAX_MICROMIPS_COMPACT(i) (((i) & 0x4000) != 0)
+#define RELAX_MICROMIPS_LINK(i) (((i) & 0x8000) != 0)
+#define RELAX_MICROMIPS_RELAX32(i) (((i) & 0x10000) != 0)
+
+#define RELAX_MICROMIPS_TOOFAR16(i) (((i) & 0x20000) != 0)
+#define RELAX_MICROMIPS_MARK_TOOFAR16(i) ((i) | 0x20000)
+#define RELAX_MICROMIPS_CLEAR_TOOFAR16(i) ((i) & ~0x20000)
+#define RELAX_MICROMIPS_TOOFAR32(i) (((i) & 0x40000) != 0)
+#define RELAX_MICROMIPS_MARK_TOOFAR32(i) ((i) | 0x40000)
+#define RELAX_MICROMIPS_CLEAR_TOOFAR32(i) ((i) & ~0x40000)
+
+/* Sign-extend 16-bit value X. */
+#define SEXT_16BIT(X) ((((X) + 0x8000) & 0xffff) - 0x8000)
+
/* Is the given value a sign-extended 32-bit value? */
#define IS_SEXT_32BIT_NUM(x) \
(((x) &~ (offsetT) 0x7fffffff) == 0 \
(((x) &~ (offsetT) 0x7fff) == 0 \
|| (((x) &~ (offsetT) 0x7fff) == ~ (offsetT) 0x7fff))
+/* Is the given value a sign-extended 12-bit value? */
+#define IS_SEXT_12BIT_NUM(x) \
+ (((((x) & 0xfff) ^ 0x800LL) - 0x800LL) == (x))
+
+/* Is the given value a sign-extended 9-bit value? */
+#define IS_SEXT_9BIT_NUM(x) \
+ (((((x) & 0x1ff) ^ 0x100LL) - 0x100LL) == (x))
+
/* Is the given value a zero-extended 32-bit value? Or a negated one? */
#define IS_ZEXT_32BIT_NUM(x) \
(((x) &~ (offsetT) 0xffffffff) == 0 \
include/opcode/mips.h specifies operand fields using the macros
OP_MASK_<FIELD> and OP_SH_<FIELD>. The MIPS16 equivalents start
with "MIPS16OP" instead of "OP". */
-#define INSERT_OPERAND(FIELD, INSN, VALUE) \
- INSERT_BITS ((INSN).insn_opcode, VALUE, OP_MASK_##FIELD, OP_SH_##FIELD)
+#define INSERT_OPERAND(MICROMIPS, FIELD, INSN, VALUE) \
+ do \
+ if (!(MICROMIPS)) \
+ INSERT_BITS ((INSN).insn_opcode, VALUE, \
+ OP_MASK_##FIELD, OP_SH_##FIELD); \
+ else \
+ INSERT_BITS ((INSN).insn_opcode, VALUE, \
+ MICROMIPSOP_MASK_##FIELD, MICROMIPSOP_SH_##FIELD); \
+ while (0)
#define MIPS16_INSERT_OPERAND(FIELD, INSN, VALUE) \
INSERT_BITS ((INSN).insn_opcode, VALUE, \
MIPS16OP_MASK_##FIELD, MIPS16OP_SH_##FIELD)
/* Extract the operand given by FIELD from mips_cl_insn INSN. */
-#define EXTRACT_OPERAND(FIELD, INSN) \
- EXTRACT_BITS ((INSN).insn_opcode, OP_MASK_##FIELD, OP_SH_##FIELD)
+#define EXTRACT_OPERAND(MICROMIPS, FIELD, INSN) \
+ (!(MICROMIPS) \
+ ? EXTRACT_BITS ((INSN).insn_opcode, OP_MASK_##FIELD, OP_SH_##FIELD) \
+ : EXTRACT_BITS ((INSN).insn_opcode, \
+ MICROMIPSOP_MASK_##FIELD, MICROMIPSOP_SH_##FIELD))
#define MIPS16_EXTRACT_OPERAND(FIELD, INSN) \
EXTRACT_BITS ((INSN).insn_opcode, \
MIPS16OP_MASK_##FIELD, \
MIPS16OP_SH_##FIELD)
+
+/* The MIPS16 EXTEND opcode, shifted left 16 places. */
+#define MIPS16_EXTEND (0xf000U << 16)
\f
+/* Whether or not we are emitting a branch-likely macro. */
+static bfd_boolean emit_branch_likely_macro = FALSE;
+
/* Global variables used when generating relaxable macros. See the
comment above RELAX_ENCODE for more details about how relaxation
is used. */
/* True if the macro is in a branch delay slot. */
bfd_boolean delay_slot_p;
+ /* Set to the length in bytes required if the macro is in a delay slot
+ that requires a specific length of instruction, otherwise zero. */
+ unsigned int delay_slot_length;
+
/* For relaxable macros, sizes[0] is the length of the first alternative
in bytes and sizes[1] is the length of the second alternative.
For non-relaxable macros, both elements give the length of the
macro in bytes. */
unsigned int sizes[2];
+ /* For relaxable macros, first_insn_sizes[0] is the length of the first
+ instruction of the first alternative in bytes and first_insn_sizes[1]
+ is the length of the first instruction of the second alternative.
+ For non-relaxable macros, both elements give the length of the first
+ instruction in bytes.
+
+ Set to zero if we haven't yet seen the first instruction. */
+ unsigned int first_insn_sizes[2];
+
+ /* For relaxable macros, insns[0] is the number of instructions for the
+ first alternative and insns[1] is the number of instructions for the
+ second alternative.
+
+ For non-relaxable macros, both elements give the number of
+ instructions for the macro. */
+ unsigned int insns[2];
+
/* The first variant frag for this macro. */
fragS *first_frag;
} mips_macro_warning;
\f
/* Prototypes for static functions. */
-#define internalError() \
- as_fatal (_("internal Error, line %d, %s"), __LINE__, __FILE__)
-
enum mips_regclass { MIPS_GR_REG, MIPS_FP_REG, MIPS16_REG };
static void append_insn
- (struct mips_cl_insn *, expressionS *, bfd_reloc_code_real_type *);
+ (struct mips_cl_insn *, expressionS *, bfd_reloc_code_real_type *,
+ bfd_boolean expansionp);
static void mips_no_prev_insn (void);
static void macro_build (expressionS *, const char *, const char *, ...);
static void mips16_macro_build
static void mips_ip (char *str, struct mips_cl_insn * ip);
static void mips16_ip (char *str, struct mips_cl_insn * ip);
static void mips16_immed
- (char *, unsigned int, int, offsetT, bfd_boolean, bfd_boolean, bfd_boolean,
- unsigned long *, bfd_boolean *, unsigned short *);
+ (char *, unsigned int, int, bfd_reloc_code_real_type, offsetT,
+ unsigned int, unsigned long *);
static size_t my_getSmallExpression
(expressionS *, bfd_reloc_code_real_type *, char *);
static void my_getExpression (expressionS *, char *);
static void s_cpreturn (int);
static void s_dtprelword (int);
static void s_dtpreldword (int);
+static void s_tprelword (int);
+static void s_tpreldword (int);
static void s_gpvalue (int);
static void s_gpword (int);
static void s_gpdword (int);
+static void s_ehword (int);
static void s_cpadd (int);
static void s_insn (int);
static void md_obj_begin (void);
static bfd_boolean pic_need_relax (symbolS *, asection *);
static int relaxed_branch_length (fragS *, asection *, int);
static int validate_mips_insn (const struct mips_opcode *);
+static int validate_micromips_insn (const struct mips_opcode *);
+static int relaxed_micromips_16bit_branch_length (fragS *, asection *, int);
+static int relaxed_micromips_32bit_branch_length (fragS *, asection *, int);
/* Table and functions used to map between CPU/ISA names, and
ISA levels, and CPU numbers. */
struct mips_cpu_info
{
const char *name; /* CPU or ISA name. */
- int flags; /* ASEs available, or ISA flag. */
+ int flags; /* MIPS_CPU_* flags. */
+ int ase; /* Set of ASEs implemented by the CPU. */
int isa; /* ISA level. */
int cpu; /* CPU number (default CPU if ISA). */
};
#define MIPS_CPU_IS_ISA 0x0001 /* Is this an ISA? (If 0, a CPU.) */
-#define MIPS_CPU_ASE_SMARTMIPS 0x0002 /* CPU implements SmartMIPS ASE */
-#define MIPS_CPU_ASE_DSP 0x0004 /* CPU implements DSP ASE */
-#define MIPS_CPU_ASE_MT 0x0008 /* CPU implements MT ASE */
-#define MIPS_CPU_ASE_MIPS3D 0x0010 /* CPU implements MIPS-3D ASE */
-#define MIPS_CPU_ASE_MDMX 0x0020 /* CPU implements MDMX ASE */
-#define MIPS_CPU_ASE_DSPR2 0x0040 /* CPU implements DSP R2 ASE */
static const struct mips_cpu_info *mips_parse_cpu (const char *, const char *);
static const struct mips_cpu_info *mips_cpu_info_from_isa (int);
static const struct mips_cpu_info *mips_cpu_info_from_arch (int);
\f
-/* Pseudo-op table.
-
- The following pseudo-ops from the Kane and Heinrich MIPS book
- should be defined here, but are currently unsupported: .alias,
- .galive, .gjaldef, .gjrlive, .livereg, .noalias.
-
- The following pseudo-ops from the Kane and Heinrich MIPS book are
- specific to the type of debugging information being generated, and
- should be defined by the object format: .aent, .begin, .bend,
- .bgnb, .end, .endb, .ent, .fmask, .frame, .loc, .mask, .verstamp,
- .vreg.
+/* Command-line options. */
+const char *md_shortopts = "O::g::G:";
- The following pseudo-ops from the Kane and Heinrich MIPS book are
- not MIPS CPU specific, but are also not specific to the object file
- format. This file is probably the best place to define them, but
- they are not currently supported: .asm0, .endr, .lab, .struct. */
+enum options
+ {
+ OPTION_MARCH = OPTION_MD_BASE,
+ OPTION_MTUNE,
+ OPTION_MIPS1,
+ OPTION_MIPS2,
+ OPTION_MIPS3,
+ OPTION_MIPS4,
+ OPTION_MIPS5,
+ OPTION_MIPS32,
+ OPTION_MIPS64,
+ OPTION_MIPS32R2,
+ OPTION_MIPS64R2,
+ OPTION_MIPS16,
+ OPTION_NO_MIPS16,
+ OPTION_MIPS3D,
+ OPTION_NO_MIPS3D,
+ OPTION_MDMX,
+ OPTION_NO_MDMX,
+ OPTION_DSP,
+ OPTION_NO_DSP,
+ OPTION_MT,
+ OPTION_NO_MT,
+ OPTION_VIRT,
+ OPTION_NO_VIRT,
+ OPTION_SMARTMIPS,
+ OPTION_NO_SMARTMIPS,
+ OPTION_DSPR2,
+ OPTION_NO_DSPR2,
+ OPTION_EVA,
+ OPTION_NO_EVA,
+ OPTION_MICROMIPS,
+ OPTION_NO_MICROMIPS,
+ OPTION_MCU,
+ OPTION_NO_MCU,
+ OPTION_COMPAT_ARCH_BASE,
+ OPTION_M4650,
+ OPTION_NO_M4650,
+ OPTION_M4010,
+ OPTION_NO_M4010,
+ OPTION_M4100,
+ OPTION_NO_M4100,
+ OPTION_M3900,
+ OPTION_NO_M3900,
+ OPTION_M7000_HILO_FIX,
+ OPTION_MNO_7000_HILO_FIX,
+ OPTION_FIX_24K,
+ OPTION_NO_FIX_24K,
+ OPTION_FIX_LOONGSON2F_JUMP,
+ OPTION_NO_FIX_LOONGSON2F_JUMP,
+ OPTION_FIX_LOONGSON2F_NOP,
+ OPTION_NO_FIX_LOONGSON2F_NOP,
+ OPTION_FIX_VR4120,
+ OPTION_NO_FIX_VR4120,
+ OPTION_FIX_VR4130,
+ OPTION_NO_FIX_VR4130,
+ OPTION_FIX_CN63XXP1,
+ OPTION_NO_FIX_CN63XXP1,
+ OPTION_TRAP,
+ OPTION_BREAK,
+ OPTION_EB,
+ OPTION_EL,
+ OPTION_FP32,
+ OPTION_GP32,
+ OPTION_CONSTRUCT_FLOATS,
+ OPTION_NO_CONSTRUCT_FLOATS,
+ OPTION_FP64,
+ OPTION_GP64,
+ OPTION_RELAX_BRANCH,
+ OPTION_NO_RELAX_BRANCH,
+ OPTION_MSHARED,
+ OPTION_MNO_SHARED,
+ OPTION_MSYM32,
+ OPTION_MNO_SYM32,
+ OPTION_SOFT_FLOAT,
+ OPTION_HARD_FLOAT,
+ OPTION_SINGLE_FLOAT,
+ OPTION_DOUBLE_FLOAT,
+ OPTION_32,
+#ifdef OBJ_ELF
+ OPTION_CALL_SHARED,
+ OPTION_CALL_NONPIC,
+ OPTION_NON_SHARED,
+ OPTION_XGOT,
+ OPTION_MABI,
+ OPTION_N32,
+ OPTION_64,
+ OPTION_MDEBUG,
+ OPTION_NO_MDEBUG,
+ OPTION_PDR,
+ OPTION_NO_PDR,
+ OPTION_MVXWORKS_PIC,
+#endif /* OBJ_ELF */
+ OPTION_END_OF_ENUM
+ };
-static const pseudo_typeS mips_pseudo_table[] =
+struct option md_longopts[] =
{
- /* MIPS specific pseudo-ops. */
- {"option", s_option, 0},
- {"set", s_mipsset, 0},
- {"rdata", s_change_sec, 'r'},
- {"sdata", s_change_sec, 's'},
- {"livereg", s_ignore, 0},
- {"abicalls", s_abicalls, 0},
- {"cpload", s_cpload, 0},
- {"cpsetup", s_cpsetup, 0},
- {"cplocal", s_cplocal, 0},
- {"cprestore", s_cprestore, 0},
- {"cpreturn", s_cpreturn, 0},
- {"dtprelword", s_dtprelword, 0},
- {"dtpreldword", s_dtpreldword, 0},
- {"gpvalue", s_gpvalue, 0},
- {"gpword", s_gpword, 0},
- {"gpdword", s_gpdword, 0},
- {"cpadd", s_cpadd, 0},
- {"insn", s_insn, 0},
-
- /* Relatively generic pseudo-ops that happen to be used on MIPS
- chips. */
- {"asciiz", stringer, 8 + 1},
- {"bss", s_change_sec, 'b'},
- {"err", s_err, 0},
- {"half", s_cons, 1},
- {"dword", s_cons, 3},
- {"weakext", s_mips_weakext, 0},
- {"origin", s_org, 0},
- {"repeat", s_rept, 0},
+ /* Options which specify architecture. */
+ {"march", required_argument, NULL, OPTION_MARCH},
+ {"mtune", required_argument, NULL, OPTION_MTUNE},
+ {"mips0", no_argument, NULL, OPTION_MIPS1},
+ {"mips1", no_argument, NULL, OPTION_MIPS1},
+ {"mips2", no_argument, NULL, OPTION_MIPS2},
+ {"mips3", no_argument, NULL, OPTION_MIPS3},
+ {"mips4", no_argument, NULL, OPTION_MIPS4},
+ {"mips5", no_argument, NULL, OPTION_MIPS5},
+ {"mips32", no_argument, NULL, OPTION_MIPS32},
+ {"mips64", no_argument, NULL, OPTION_MIPS64},
+ {"mips32r2", no_argument, NULL, OPTION_MIPS32R2},
+ {"mips64r2", no_argument, NULL, OPTION_MIPS64R2},
- /* For MIPS this is non-standard, but we define it for consistency. */
- {"sbss", s_change_sec, 'B'},
+ /* Options which specify Application Specific Extensions (ASEs). */
+ {"mips16", no_argument, NULL, OPTION_MIPS16},
+ {"no-mips16", no_argument, NULL, OPTION_NO_MIPS16},
+ {"mips3d", no_argument, NULL, OPTION_MIPS3D},
+ {"no-mips3d", no_argument, NULL, OPTION_NO_MIPS3D},
+ {"mdmx", no_argument, NULL, OPTION_MDMX},
+ {"no-mdmx", no_argument, NULL, OPTION_NO_MDMX},
+ {"mdsp", no_argument, NULL, OPTION_DSP},
+ {"mno-dsp", no_argument, NULL, OPTION_NO_DSP},
+ {"mmt", no_argument, NULL, OPTION_MT},
+ {"mno-mt", no_argument, NULL, OPTION_NO_MT},
+ {"msmartmips", no_argument, NULL, OPTION_SMARTMIPS},
+ {"mno-smartmips", no_argument, NULL, OPTION_NO_SMARTMIPS},
+ {"mdspr2", no_argument, NULL, OPTION_DSPR2},
+ {"mno-dspr2", no_argument, NULL, OPTION_NO_DSPR2},
+ {"meva", no_argument, NULL, OPTION_EVA},
+ {"mno-eva", no_argument, NULL, OPTION_NO_EVA},
+ {"mmicromips", no_argument, NULL, OPTION_MICROMIPS},
+ {"mno-micromips", no_argument, NULL, OPTION_NO_MICROMIPS},
+ {"mmcu", no_argument, NULL, OPTION_MCU},
+ {"mno-mcu", no_argument, NULL, OPTION_NO_MCU},
+ {"mvirt", no_argument, NULL, OPTION_VIRT},
+ {"mno-virt", no_argument, NULL, OPTION_NO_VIRT},
- /* These pseudo-ops are defined in read.c, but must be overridden
- here for one reason or another. */
- {"align", s_align, 0},
+ /* Old-style architecture options. Don't add more of these. */
+ {"m4650", no_argument, NULL, OPTION_M4650},
+ {"no-m4650", no_argument, NULL, OPTION_NO_M4650},
+ {"m4010", no_argument, NULL, OPTION_M4010},
+ {"no-m4010", no_argument, NULL, OPTION_NO_M4010},
+ {"m4100", no_argument, NULL, OPTION_M4100},
+ {"no-m4100", no_argument, NULL, OPTION_NO_M4100},
+ {"m3900", no_argument, NULL, OPTION_M3900},
+ {"no-m3900", no_argument, NULL, OPTION_NO_M3900},
+
+ /* Options which enable bug fixes. */
+ {"mfix7000", no_argument, NULL, OPTION_M7000_HILO_FIX},
+ {"no-fix-7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX},
+ {"mno-fix7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX},
+ {"mfix-loongson2f-jump", no_argument, NULL, OPTION_FIX_LOONGSON2F_JUMP},
+ {"mno-fix-loongson2f-jump", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_JUMP},
+ {"mfix-loongson2f-nop", no_argument, NULL, OPTION_FIX_LOONGSON2F_NOP},
+ {"mno-fix-loongson2f-nop", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_NOP},
+ {"mfix-vr4120", no_argument, NULL, OPTION_FIX_VR4120},
+ {"mno-fix-vr4120", no_argument, NULL, OPTION_NO_FIX_VR4120},
+ {"mfix-vr4130", no_argument, NULL, OPTION_FIX_VR4130},
+ {"mno-fix-vr4130", no_argument, NULL, OPTION_NO_FIX_VR4130},
+ {"mfix-24k", no_argument, NULL, OPTION_FIX_24K},
+ {"mno-fix-24k", no_argument, NULL, OPTION_NO_FIX_24K},
+ {"mfix-cn63xxp1", no_argument, NULL, OPTION_FIX_CN63XXP1},
+ {"mno-fix-cn63xxp1", no_argument, NULL, OPTION_NO_FIX_CN63XXP1},
+
+ /* Miscellaneous options. */
+ {"trap", no_argument, NULL, OPTION_TRAP},
+ {"no-break", no_argument, NULL, OPTION_TRAP},
+ {"break", no_argument, NULL, OPTION_BREAK},
+ {"no-trap", no_argument, NULL, OPTION_BREAK},
+ {"EB", no_argument, NULL, OPTION_EB},
+ {"EL", no_argument, NULL, OPTION_EL},
+ {"mfp32", no_argument, NULL, OPTION_FP32},
+ {"mgp32", no_argument, NULL, OPTION_GP32},
+ {"construct-floats", no_argument, NULL, OPTION_CONSTRUCT_FLOATS},
+ {"no-construct-floats", no_argument, NULL, OPTION_NO_CONSTRUCT_FLOATS},
+ {"mfp64", no_argument, NULL, OPTION_FP64},
+ {"mgp64", no_argument, NULL, OPTION_GP64},
+ {"relax-branch", no_argument, NULL, OPTION_RELAX_BRANCH},
+ {"no-relax-branch", no_argument, NULL, OPTION_NO_RELAX_BRANCH},
+ {"mshared", no_argument, NULL, OPTION_MSHARED},
+ {"mno-shared", no_argument, NULL, OPTION_MNO_SHARED},
+ {"msym32", no_argument, NULL, OPTION_MSYM32},
+ {"mno-sym32", no_argument, NULL, OPTION_MNO_SYM32},
+ {"msoft-float", no_argument, NULL, OPTION_SOFT_FLOAT},
+ {"mhard-float", no_argument, NULL, OPTION_HARD_FLOAT},
+ {"msingle-float", no_argument, NULL, OPTION_SINGLE_FLOAT},
+ {"mdouble-float", no_argument, NULL, OPTION_DOUBLE_FLOAT},
+
+ /* Strictly speaking this next option is ELF specific,
+ but we allow it for other ports as well in order to
+ make testing easier. */
+ {"32", no_argument, NULL, OPTION_32},
+
+ /* ELF-specific options. */
+#ifdef OBJ_ELF
+ {"KPIC", no_argument, NULL, OPTION_CALL_SHARED},
+ {"call_shared", no_argument, NULL, OPTION_CALL_SHARED},
+ {"call_nonpic", no_argument, NULL, OPTION_CALL_NONPIC},
+ {"non_shared", no_argument, NULL, OPTION_NON_SHARED},
+ {"xgot", no_argument, NULL, OPTION_XGOT},
+ {"mabi", required_argument, NULL, OPTION_MABI},
+ {"n32", no_argument, NULL, OPTION_N32},
+ {"64", no_argument, NULL, OPTION_64},
+ {"mdebug", no_argument, NULL, OPTION_MDEBUG},
+ {"no-mdebug", no_argument, NULL, OPTION_NO_MDEBUG},
+ {"mpdr", no_argument, NULL, OPTION_PDR},
+ {"mno-pdr", no_argument, NULL, OPTION_NO_PDR},
+ {"mvxworks-pic", no_argument, NULL, OPTION_MVXWORKS_PIC},
+#endif /* OBJ_ELF */
+
+ {NULL, no_argument, NULL, 0}
+};
+size_t md_longopts_size = sizeof (md_longopts);
+\f
+/* Pseudo-op table.
+
+ The following pseudo-ops from the Kane and Heinrich MIPS book
+ should be defined here, but are currently unsupported: .alias,
+ .galive, .gjaldef, .gjrlive, .livereg, .noalias.
+
+ The following pseudo-ops from the Kane and Heinrich MIPS book are
+ specific to the type of debugging information being generated, and
+ should be defined by the object format: .aent, .begin, .bend,
+ .bgnb, .end, .endb, .ent, .fmask, .frame, .loc, .mask, .verstamp,
+ .vreg.
+
+ The following pseudo-ops from the Kane and Heinrich MIPS book are
+ not MIPS CPU specific, but are also not specific to the object file
+ format. This file is probably the best place to define them, but
+ they are not currently supported: .asm0, .endr, .lab, .struct. */
+
+static const pseudo_typeS mips_pseudo_table[] =
+{
+ /* MIPS specific pseudo-ops. */
+ {"option", s_option, 0},
+ {"set", s_mipsset, 0},
+ {"rdata", s_change_sec, 'r'},
+ {"sdata", s_change_sec, 's'},
+ {"livereg", s_ignore, 0},
+ {"abicalls", s_abicalls, 0},
+ {"cpload", s_cpload, 0},
+ {"cpsetup", s_cpsetup, 0},
+ {"cplocal", s_cplocal, 0},
+ {"cprestore", s_cprestore, 0},
+ {"cpreturn", s_cpreturn, 0},
+ {"dtprelword", s_dtprelword, 0},
+ {"dtpreldword", s_dtpreldword, 0},
+ {"tprelword", s_tprelword, 0},
+ {"tpreldword", s_tpreldword, 0},
+ {"gpvalue", s_gpvalue, 0},
+ {"gpword", s_gpword, 0},
+ {"gpdword", s_gpdword, 0},
+ {"ehword", s_ehword, 0},
+ {"cpadd", s_cpadd, 0},
+ {"insn", s_insn, 0},
+
+ /* Relatively generic pseudo-ops that happen to be used on MIPS
+ chips. */
+ {"asciiz", stringer, 8 + 1},
+ {"bss", s_change_sec, 'b'},
+ {"err", s_err, 0},
+ {"half", s_cons, 1},
+ {"dword", s_cons, 3},
+ {"weakext", s_mips_weakext, 0},
+ {"origin", s_org, 0},
+ {"repeat", s_rept, 0},
+
+ /* For MIPS this is non-standard, but we define it for consistency. */
+ {"sbss", s_change_sec, 'B'},
+
+ /* These pseudo-ops are defined in read.c, but must be overridden
+ here for one reason or another. */
+ {"align", s_align, 0},
{"byte", s_cons, 0},
{"data", s_change_sec, 'd'},
{"double", s_float_cons, 'd'},
{"section", s_change_section, 0},
{"short", s_cons, 1},
{"single", s_float_cons, 'f'},
+ {"stabd", s_mips_stab, 'd'},
{"stabn", s_mips_stab, 'n'},
+ {"stabs", s_mips_stab, 's'},
{"text", s_change_sec, 't'},
{"word", s_cons, 2},
#define label_list tc_segment_info_data.labels
static void mips_clear_insn_labels (void);
+static void mips_mark_labels (void);
+static void mips_compressed_mark_labels (void);
static inline void
mips_clear_insn_labels (void)
}
}
+/* Mark instruction labels in MIPS16/microMIPS mode. */
+
+static inline void
+mips_mark_labels (void)
+{
+ if (HAVE_CODE_COMPRESSION)
+ mips_compressed_mark_labels ();
+}
\f
static char *expr_end;
static bfd_reloc_code_real_type offset_reloc[3]
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
-/* These are set by mips16_ip if an explicit extension is used. */
+/* This is set to the resulting size of the instruction to be produced
+ by mips16_ip if an explicit extension is used or by mips_ip if an
+ explicit size is supplied. */
-static bfd_boolean mips16_small, mips16_ext;
+static unsigned int forced_insn_length;
+
+/* True if we are assembling an instruction. All dot symbols defined during
+ this time should be treated as code labels. */
+
+static bfd_boolean mips_assembling_insn;
#ifdef OBJ_ELF
/* The pdr segment for per procedure frame/regmask info. Not used for
}
}
+/* Return the length of a microMIPS instruction in bytes. If bits of
+ the mask beyond the low 16 are 0, then it is a 16-bit instruction.
+ Otherwise assume a 32-bit instruction; 48-bit instructions (0x1f
+ major opcode) will require further modifications to the opcode
+ table. */
+
+static inline unsigned int
+micromips_insn_length (const struct mips_opcode *mo)
+{
+ return (mo->mask >> 16) == 0 ? 2 : 4;
+}
+
+/* Return the length of MIPS16 instruction OPCODE. */
+
+static inline unsigned int
+mips16_opcode_length (unsigned long opcode)
+{
+ return (opcode >> 16) == 0 ? 2 : 4;
+}
+
/* Return the length of instruction INSN. */
static inline unsigned int
insn_length (const struct mips_cl_insn *insn)
{
- if (!mips_opts.mips16)
+ if (mips_opts.micromips)
+ return micromips_insn_length (insn->insn_mo);
+ else if (mips_opts.mips16)
+ return mips16_opcode_length (insn->insn_opcode);
+ else
return 4;
- return insn->mips16_absolute_jump_p || insn->use_extend ? 4 : 2;
}
/* Initialise INSN from opcode entry MO. Leave its position unspecified. */
size_t i;
insn->insn_mo = mo;
- insn->use_extend = FALSE;
- insn->extend = 0;
insn->insn_opcode = mo->match;
insn->frag = NULL;
insn->where = 0;
insn->noreorder_p = (mips_opts.noreorder > 0);
insn->mips16_absolute_jump_p = 0;
insn->complete_p = 0;
+ insn->cleared_p = 0;
}
-/* Record the current MIPS16 mode in now_seg. */
+/* Record the current MIPS16/microMIPS mode in now_seg. */
static void
-mips_record_mips16_mode (void)
+mips_record_compressed_mode (void)
{
segment_info_type *si;
si = seg_info (now_seg);
if (si->tc_segment_info_data.mips16 != mips_opts.mips16)
si->tc_segment_info_data.mips16 = mips_opts.mips16;
+ if (si->tc_segment_info_data.micromips != mips_opts.micromips)
+ si->tc_segment_info_data.micromips = mips_opts.micromips;
+}
+
+/* Read a standard MIPS instruction from BUF. */
+
+static unsigned long
+read_insn (char *buf)
+{
+ if (target_big_endian)
+ return bfd_getb32 ((bfd_byte *) buf);
+ else
+ return bfd_getl32 ((bfd_byte *) buf);
+}
+
+/* Write standard MIPS instruction INSN to BUF. Return a pointer to
+ the next byte. */
+
+static char *
+write_insn (char *buf, unsigned int insn)
+{
+ md_number_to_chars (buf, insn, 4);
+ return buf + 4;
+}
+
+/* Read a microMIPS or MIPS16 opcode from BUF, given that it
+ has length LENGTH. */
+
+static unsigned long
+read_compressed_insn (char *buf, unsigned int length)
+{
+ unsigned long insn;
+ unsigned int i;
+
+ insn = 0;
+ for (i = 0; i < length; i += 2)
+ {
+ insn <<= 16;
+ if (target_big_endian)
+ insn |= bfd_getb16 ((char *) buf);
+ else
+ insn |= bfd_getl16 ((char *) buf);
+ buf += 2;
+ }
+ return insn;
+}
+
+/* Write microMIPS or MIPS16 instruction INSN to BUF, given that the
+ instruction is LENGTH bytes long. Return a pointer to the next byte. */
+
+static char *
+write_compressed_insn (char *buf, unsigned int insn, unsigned int length)
+{
+ unsigned int i;
+
+ for (i = 0; i < length; i += 2)
+ md_number_to_chars (buf + i, insn >> ((length - i - 2) * 8), 2);
+ return buf + length;
}
/* Install INSN at the location specified by its "frag" and "where" fields. */
install_insn (const struct mips_cl_insn *insn)
{
char *f = insn->frag->fr_literal + insn->where;
- if (!mips_opts.mips16)
- md_number_to_chars (f, insn->insn_opcode, 4);
- else if (insn->mips16_absolute_jump_p)
- {
- md_number_to_chars (f, insn->insn_opcode >> 16, 2);
- md_number_to_chars (f + 2, insn->insn_opcode & 0xffff, 2);
- }
+ if (HAVE_CODE_COMPRESSION)
+ write_compressed_insn (f, insn->insn_opcode, insn_length (insn));
else
- {
- if (insn->use_extend)
- {
- md_number_to_chars (f, 0xf000 | insn->extend, 2);
- f += 2;
- }
- md_number_to_chars (f, insn->insn_opcode, 2);
- }
- mips_record_mips16_mode ();
+ write_insn (f, insn->insn_opcode);
+ mips_record_compressed_mode ();
}
/* Move INSN to offset WHERE in FRAG. Adjust the fixups accordingly
}
}
-/* Emit a nop instruction, recording it in the history buffer. */
-
-static void
-emit_nop (void)
-{
- add_fixed_insn (NOP_INSN);
- insert_into_history (0, 1, NOP_INSN);
-}
-
/* Initialize vr4120_conflicts. There is a bit of duplication here:
the idea is to make it obvious at a glance that each errata is
included. */
{0, 0}
};
+/* Check if S points at a valid register specifier according to TYPES.
+ If so, then return 1, advance S to consume the specifier and store
+ the register's number in REGNOP, otherwise return 0. */
+
static int
reg_lookup (char **s, unsigned int types, unsigned int *regnop)
{
return reg >= 0;
}
-/* Return TRUE if opcode MO is valid on the currently selected ISA and
- architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
+/* Check if S points at a valid register list according to TYPES.
+ If so, then return 1, advance S to consume the list and store
+ the registers present on the list as a bitmask of ones in REGLISTP,
+ otherwise return 0. A valid list comprises a comma-separated
+ enumeration of valid single registers and/or dash-separated
+ contiguous register ranges as determined by their numbers.
+
+ As a special exception if one of s0-s7 registers is specified as
+ the range's lower delimiter and s8 (fp) is its upper one, then no
+ registers whose numbers place them between s7 and s8 (i.e. $24-$29)
+ are selected; they have to be listed separately if needed. */
+
+static int
+reglist_lookup (char **s, unsigned int types, unsigned int *reglistp)
+{
+ unsigned int reglist = 0;
+ unsigned int lastregno;
+ bfd_boolean ok = TRUE;
+ unsigned int regmask;
+ char *s_endlist = *s;
+ char *s_reset = *s;
+ unsigned int regno;
+
+ while (reg_lookup (s, types, ®no))
+ {
+ lastregno = regno;
+ if (**s == '-')
+ {
+ (*s)++;
+ ok = reg_lookup (s, types, &lastregno);
+ if (ok && lastregno < regno)
+ ok = FALSE;
+ if (!ok)
+ break;
+ }
+
+ if (lastregno == FP && regno >= S0 && regno <= S7)
+ {
+ lastregno = S7;
+ reglist |= 1 << FP;
+ }
+ regmask = 1 << lastregno;
+ regmask = (regmask << 1) - 1;
+ regmask ^= (1 << regno) - 1;
+ reglist |= regmask;
+
+ s_endlist = *s;
+ if (**s != ',')
+ break;
+ (*s)++;
+ }
+
+ if (ok)
+ *s = s_endlist;
+ else
+ *s = s_reset;
+ if (reglistp)
+ *reglistp = reglist;
+ return ok && reglist != 0;
+}
+
+/* Return TRUE if opcode MO is valid on the currently selected ISA, ASE
+ and architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
static bfd_boolean
is_opcode_valid (const struct mips_opcode *mo)
{
int isa = mips_opts.isa;
+ int ase = mips_opts.ase;
int fp_s, fp_d;
- if (mips_opts.ase_mdmx)
- isa |= INSN_MDMX;
- if (mips_opts.ase_dsp)
- isa |= INSN_DSP;
- if (mips_opts.ase_dsp && ISA_SUPPORTS_DSP64_ASE)
- isa |= INSN_DSP64;
- if (mips_opts.ase_dspr2)
- isa |= INSN_DSPR2;
- if (mips_opts.ase_mt)
- isa |= INSN_MT;
- if (mips_opts.ase_mips3d)
- isa |= INSN_MIPS3D;
- if (mips_opts.ase_smartmips)
- isa |= INSN_SMARTMIPS;
-
- /* Don't accept instructions based on the ISA if the CPU does not implement
- all the coprocessor insns. */
- if (NO_ISA_COP (mips_opts.arch)
- && COP_INSN (mo->pinfo))
- isa = 0;
-
- if (!OPCODE_IS_MEMBER (mo, isa, mips_opts.arch))
+ if ((ase & ASE_DSP) && ISA_SUPPORTS_DSP64_ASE)
+ ase |= ASE_DSP64;
+ if ((ase & ASE_VIRT) && ISA_SUPPORTS_VIRT64_ASE)
+ ase |= ASE_VIRT64;
+
+ if (!opcode_is_member (mo, isa, ase, mips_opts.arch))
return FALSE;
/* Check whether the instruction or macro requires single-precision or
static bfd_boolean
is_opcode_valid_16 (const struct mips_opcode *mo)
{
- return OPCODE_IS_MEMBER (mo, mips_opts.isa, mips_opts.arch) ? TRUE : FALSE;
+ return opcode_is_member (mo, mips_opts.isa, 0, mips_opts.arch);
+}
+
+/* Return TRUE if the size of the microMIPS opcode MO matches one
+ explicitly requested. Always TRUE in the standard MIPS mode. */
+
+static bfd_boolean
+is_size_valid (const struct mips_opcode *mo)
+{
+ if (!mips_opts.micromips)
+ return TRUE;
+
+ if (!forced_insn_length)
+ return TRUE;
+ if (mo->pinfo == INSN_MACRO)
+ return FALSE;
+ return forced_insn_length == micromips_insn_length (mo);
+}
+
+/* Return TRUE if the microMIPS opcode MO is valid for the delay slot
+ of the preceding instruction. Always TRUE in the standard MIPS mode.
+
+ We don't accept macros in 16-bit delay slots to avoid a case where
+ a macro expansion fails because it relies on a preceding 32-bit real
+ instruction to have matched and does not handle the operands correctly.
+ The only macros that may expand to 16-bit instructions are JAL that
+ cannot be placed in a delay slot anyway, and corner cases of BALIGN
+ and BGT (that likewise cannot be placed in a delay slot) that decay to
+ a NOP. In all these cases the macros precede any corresponding real
+ instruction definitions in the opcode table, so they will match in the
+ second pass where the size of the delay slot is ignored and therefore
+ produce correct code. */
+
+static bfd_boolean
+is_delay_slot_valid (const struct mips_opcode *mo)
+{
+ if (!mips_opts.micromips)
+ return TRUE;
+
+ if (mo->pinfo == INSN_MACRO)
+ return (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) == 0;
+ if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
+ && micromips_insn_length (mo) != 4)
+ return FALSE;
+ if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0
+ && micromips_insn_length (mo) != 2)
+ return FALSE;
+
+ return TRUE;
}
/* This function is called once, at assembler startup time. It should set up
&& strcmp (mips16_opcodes[i].name, name) == 0);
}
+ micromips_op_hash = hash_new ();
+
+ i = 0;
+ while (i < bfd_micromips_num_opcodes)
+ {
+ const char *name = micromips_opcodes[i].name;
+
+ retval = hash_insert (micromips_op_hash, name,
+ (void *) µmips_opcodes[i]);
+ if (retval != NULL)
+ as_fatal (_("internal: can't hash `%s': %s"),
+ micromips_opcodes[i].name, retval);
+ do
+ if (micromips_opcodes[i].pinfo != INSN_MACRO)
+ {
+ struct mips_cl_insn *micromips_nop_insn;
+
+ if (!validate_micromips_insn (µmips_opcodes[i]))
+ broken = 1;
+
+ if (micromips_insn_length (micromips_opcodes + i) == 2)
+ micromips_nop_insn = µmips_nop16_insn;
+ else if (micromips_insn_length (micromips_opcodes + i) == 4)
+ micromips_nop_insn = µmips_nop32_insn;
+ else
+ continue;
+
+ if (micromips_nop_insn->insn_mo == NULL
+ && strcmp (name, "nop") == 0)
+ {
+ create_insn (micromips_nop_insn, micromips_opcodes + i);
+ micromips_nop_insn->fixed_p = 1;
+ }
+ }
+ while (++i < bfd_micromips_num_opcodes
+ && strcmp (micromips_opcodes[i].name, name) == 0);
+ }
+
if (broken)
as_fatal (_("Broken assembler. No assembly attempted."));
offset_reloc[1] = BFD_RELOC_UNUSED;
offset_reloc[2] = BFD_RELOC_UNUSED;
+ mips_mark_labels ();
+ mips_assembling_insn = TRUE;
+
if (mips_opts.mips16)
mips16_ip (str, &insn);
else
}
if (insn_error)
- {
- as_bad ("%s `%s'", insn_error, str);
- return;
- }
-
- if (insn.insn_mo->pinfo == INSN_MACRO)
+ as_bad ("%s `%s'", insn_error, str);
+ else if (insn.insn_mo->pinfo == INSN_MACRO)
{
macro_start ();
if (mips_opts.mips16)
else
{
if (imm_expr.X_op != O_absent)
- append_insn (&insn, &imm_expr, imm_reloc);
+ append_insn (&insn, &imm_expr, imm_reloc, FALSE);
else if (offset_expr.X_op != O_absent)
- append_insn (&insn, &offset_expr, offset_reloc);
+ append_insn (&insn, &offset_expr, offset_reloc, FALSE);
else
- append_insn (&insn, NULL, unused_reloc);
+ append_insn (&insn, NULL, unused_reloc, FALSE);
}
+
+ mips_assembling_insn = FALSE;
}
/* Convenience functions for abstracting away the differences between
}
static inline bfd_boolean
-got16_reloc_p (bfd_reloc_code_real_type reloc)
+micromips_reloc_p (bfd_reloc_code_real_type reloc)
{
- return reloc == BFD_RELOC_MIPS_GOT16 || reloc == BFD_RELOC_MIPS16_GOT16;
-}
+ switch (reloc)
+ {
+ case BFD_RELOC_MICROMIPS_7_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_10_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_GPREL16:
+ case BFD_RELOC_MICROMIPS_JMP:
+ case BFD_RELOC_MICROMIPS_HI16:
+ case BFD_RELOC_MICROMIPS_HI16_S:
+ case BFD_RELOC_MICROMIPS_LO16:
+ case BFD_RELOC_MICROMIPS_LITERAL:
+ case BFD_RELOC_MICROMIPS_GOT16:
+ case BFD_RELOC_MICROMIPS_CALL16:
+ case BFD_RELOC_MICROMIPS_GOT_HI16:
+ case BFD_RELOC_MICROMIPS_GOT_LO16:
+ case BFD_RELOC_MICROMIPS_CALL_HI16:
+ case BFD_RELOC_MICROMIPS_CALL_LO16:
+ case BFD_RELOC_MICROMIPS_SUB:
+ case BFD_RELOC_MICROMIPS_GOT_PAGE:
+ case BFD_RELOC_MICROMIPS_GOT_OFST:
+ case BFD_RELOC_MICROMIPS_GOT_DISP:
+ case BFD_RELOC_MICROMIPS_HIGHEST:
+ case BFD_RELOC_MICROMIPS_HIGHER:
+ case BFD_RELOC_MICROMIPS_SCN_DISP:
+ case BFD_RELOC_MICROMIPS_JALR:
+ return TRUE;
-static inline bfd_boolean
-hi16_reloc_p (bfd_reloc_code_real_type reloc)
+ default:
+ return FALSE;
+ }
+}
+
+static inline bfd_boolean
+jmp_reloc_p (bfd_reloc_code_real_type reloc)
+{
+ return reloc == BFD_RELOC_MIPS_JMP || reloc == BFD_RELOC_MICROMIPS_JMP;
+}
+
+static inline bfd_boolean
+got16_reloc_p (bfd_reloc_code_real_type reloc)
+{
+ return (reloc == BFD_RELOC_MIPS_GOT16 || reloc == BFD_RELOC_MIPS16_GOT16
+ || reloc == BFD_RELOC_MICROMIPS_GOT16);
+}
+
+static inline bfd_boolean
+hi16_reloc_p (bfd_reloc_code_real_type reloc)
{
- return reloc == BFD_RELOC_HI16_S || reloc == BFD_RELOC_MIPS16_HI16_S;
+ return (reloc == BFD_RELOC_HI16_S || reloc == BFD_RELOC_MIPS16_HI16_S
+ || reloc == BFD_RELOC_MICROMIPS_HI16_S);
}
static inline bfd_boolean
lo16_reloc_p (bfd_reloc_code_real_type reloc)
{
- return reloc == BFD_RELOC_LO16 || reloc == BFD_RELOC_MIPS16_LO16;
+ return (reloc == BFD_RELOC_LO16 || reloc == BFD_RELOC_MIPS16_LO16
+ || reloc == BFD_RELOC_MICROMIPS_LO16);
+}
+
+static inline bfd_boolean
+jalr_reloc_p (bfd_reloc_code_real_type reloc)
+{
+ return reloc == BFD_RELOC_MIPS_JALR || reloc == BFD_RELOC_MICROMIPS_JALR;
+}
+
+/* Return true if RELOC is a PC-relative relocation that does not have
+ full address range. */
+
+static inline bfd_boolean
+limited_pcrel_reloc_p (bfd_reloc_code_real_type reloc)
+{
+ switch (reloc)
+ {
+ case BFD_RELOC_16_PCREL_S2:
+ case BFD_RELOC_MICROMIPS_7_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_10_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ return TRUE;
+
+ case BFD_RELOC_32_PCREL:
+ return HAVE_64BIT_ADDRESSES;
+
+ default:
+ return FALSE;
+ }
}
/* Return true if the given relocation might need a matching %lo().
static inline bfd_reloc_code_real_type
matching_lo_reloc (bfd_reloc_code_real_type reloc)
{
- return mips16_reloc_p (reloc) ? BFD_RELOC_MIPS16_LO16 : BFD_RELOC_LO16;
+ return (mips16_reloc_p (reloc) ? BFD_RELOC_MIPS16_LO16
+ : (micromips_reloc_p (reloc) ? BFD_RELOC_MICROMIPS_LO16
+ : BFD_RELOC_LO16));
}
/* Return true if the given fixup is followed by a matching R_MIPS_LO16
&& fixp->fx_offset == fixp->fx_next->fx_offset);
}
-/* See whether instruction IP reads register REG. CLASS is the type
- of register. */
-
-static int
-insn_uses_reg (const struct mips_cl_insn *ip, unsigned int reg,
- enum mips_regclass regclass)
-{
- if (regclass == MIPS16_REG)
- {
- gas_assert (mips_opts.mips16);
- reg = mips16_to_32_reg_map[reg];
- regclass = MIPS_GR_REG;
- }
-
- /* Don't report on general register ZERO, since it never changes. */
- if (regclass == MIPS_GR_REG && reg == ZERO)
- return 0;
-
- if (regclass == MIPS_FP_REG)
- {
- gas_assert (! mips_opts.mips16);
- /* If we are called with either $f0 or $f1, we must check $f0.
- This is not optimal, because it will introduce an unnecessary
- NOP between "lwc1 $f0" and "swc1 $f1". To fix this we would
- need to distinguish reading both $f0 and $f1 or just one of
- them. Note that we don't have to check the other way,
- because there is no instruction that sets both $f0 and $f1
- and requires a delay. */
- if ((ip->insn_mo->pinfo & INSN_READ_FPR_S)
- && ((EXTRACT_OPERAND (FS, *ip) & ~(unsigned) 1)
- == (reg &~ (unsigned) 1)))
- return 1;
- if ((ip->insn_mo->pinfo & INSN_READ_FPR_T)
- && ((EXTRACT_OPERAND (FT, *ip) & ~(unsigned) 1)
- == (reg &~ (unsigned) 1)))
- return 1;
- if ((ip->insn_mo->pinfo2 & INSN2_READ_FPR_Z)
- && ((EXTRACT_OPERAND (FZ, *ip) & ~(unsigned) 1)
- == (reg &~ (unsigned) 1)))
- return 1;
- }
- else if (! mips_opts.mips16)
- {
- if ((ip->insn_mo->pinfo & INSN_READ_GPR_S)
- && EXTRACT_OPERAND (RS, *ip) == reg)
- return 1;
- if ((ip->insn_mo->pinfo & INSN_READ_GPR_T)
- && EXTRACT_OPERAND (RT, *ip) == reg)
- return 1;
- if ((ip->insn_mo->pinfo2 & INSN2_READ_GPR_D)
- && EXTRACT_OPERAND (RD, *ip) == reg)
- return 1;
- if ((ip->insn_mo->pinfo2 & INSN2_READ_GPR_Z)
- && EXTRACT_OPERAND (RZ, *ip) == reg)
- return 1;
- }
- else
- {
- if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_X)
- && mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)] == reg)
- return 1;
- if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Y)
- && mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)] == reg)
- return 1;
- if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Z)
- && (mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (MOVE32Z, *ip)]
- == reg))
- return 1;
- if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_T) && reg == TREG)
- return 1;
- if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_SP) && reg == SP)
- return 1;
- if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_31) && reg == RA)
- return 1;
- if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_GPR_X)
- && MIPS16_EXTRACT_OPERAND (REGR32, *ip) == reg)
- return 1;
- }
-
- return 0;
-}
-
/* This function returns true if modifying a register requires a
delay. */
delay the use of general register rt for one instruction. */
/* Itbl support may require additional care here. */
know (prev_pinfo & INSN_WRITE_GPR_T);
- if (reg == EXTRACT_OPERAND (RT, history[0]))
+ if (reg == EXTRACT_OPERAND (mips_opts.micromips, RT, history[0]))
return 1;
}
return 0;
}
-/* Move all labels in insn_labels to the current insertion point. */
+/* Move all labels in LABELS to the current insertion point. TEXT_P
+ says whether the labels refer to text or data. */
static void
-mips_move_labels (void)
+mips_move_labels (struct insn_label_list *labels, bfd_boolean text_p)
{
- segment_info_type *si = seg_info (now_seg);
struct insn_label_list *l;
valueT val;
- for (l = si->label_list; l != NULL; l = l->next)
+ for (l = labels; l != NULL; l = l->next)
{
gas_assert (S_GET_SEGMENT (l->label) == now_seg);
symbol_set_frag (l->label, frag_now);
val = (valueT) frag_now_fix ();
- /* mips16 text labels are stored as odd. */
- if (mips_opts.mips16)
+ /* MIPS16/microMIPS text labels are stored as odd. */
+ if (text_p && HAVE_CODE_COMPRESSION)
++val;
S_SET_VALUE (l->label, val);
}
}
+/* Move all labels in insn_labels to the current insertion point
+ and treat them as text labels. */
+
+static void
+mips_move_text_labels (void)
+{
+ mips_move_labels (seg_info (now_seg)->label_list, TRUE);
+}
+
static bfd_boolean
s_is_linkonce (symbolS *sym, segT from_seg)
{
return linkonce;
}
-/* Mark instruction labels in mips16 mode. This permits the linker to
- handle them specially, such as generating jalx instructions when
- needed. We also make them odd for the duration of the assembly, in
- order to generate the right sort of code. We will make them even
+/* Mark MIPS16 or microMIPS instruction label LABEL. This permits the
+ linker to handle them specially, such as generating jalx instructions
+ when needed. We also make them odd for the duration of the assembly,
+ in order to generate the right sort of code. We will make them even
in the adjust_symtab routine, while leaving them marked. This is
convenient for the debugger and the disassembler. The linker knows
to make them odd again. */
static void
-mips16_mark_labels (void)
+mips_compressed_mark_label (symbolS *label)
{
- segment_info_type *si = seg_info (now_seg);
- struct insn_label_list *l;
-
- if (!mips_opts.mips16)
- return;
-
- for (l = si->label_list; l != NULL; l = l->next)
- {
- symbolS *label = l->label;
+ gas_assert (HAVE_CODE_COMPRESSION);
#if defined(OBJ_ELF) || defined(OBJ_MAYBE_ELF)
- if (IS_ELF)
+ if (IS_ELF)
+ {
+ if (mips_opts.mips16)
S_SET_OTHER (label, ELF_ST_SET_MIPS16 (S_GET_OTHER (label)));
-#endif
- if ((S_GET_VALUE (label) & 1) == 0
- /* Don't adjust the address if the label is global or weak, or
- in a link-once section, since we'll be emitting symbol reloc
- references to it which will be patched up by the linker, and
- the final value of the symbol may or may not be MIPS16. */
- && ! S_IS_WEAK (label)
- && ! S_IS_EXTERNAL (label)
- && ! s_is_linkonce (label, now_seg))
- S_SET_VALUE (label, S_GET_VALUE (label) | 1);
+ else
+ S_SET_OTHER (label, ELF_ST_SET_MICROMIPS (S_GET_OTHER (label)));
}
+#endif
+ if ((S_GET_VALUE (label) & 1) == 0
+ /* Don't adjust the address if the label is global or weak, or
+ in a link-once section, since we'll be emitting symbol reloc
+ references to it which will be patched up by the linker, and
+ the final value of the symbol may or may not be MIPS16/microMIPS. */
+ && !S_IS_WEAK (label)
+ && !S_IS_EXTERNAL (label)
+ && !s_is_linkonce (label, now_seg))
+ S_SET_VALUE (label, S_GET_VALUE (label) | 1);
+}
+
+/* Mark preceding MIPS16 or microMIPS instruction labels. */
+
+static void
+mips_compressed_mark_labels (void)
+{
+ struct insn_label_list *l;
+
+ for (l = seg_info (now_seg)->label_list; l != NULL; l = l->next)
+ mips_compressed_mark_label (l->label);
}
/* End the current frag. Make it a variant frag and record the
mips_relax.sequence = 0;
}
+/* Return true if IP is a delayed branch or jump. */
+
+static inline bfd_boolean
+delayed_branch_p (const struct mips_cl_insn *ip)
+{
+ return (ip->insn_mo->pinfo & (INSN_UNCOND_BRANCH_DELAY
+ | INSN_COND_BRANCH_DELAY
+ | INSN_COND_BRANCH_LIKELY)) != 0;
+}
+
+/* Return true if IP is a compact branch or jump. */
+
+static inline bfd_boolean
+compact_branch_p (const struct mips_cl_insn *ip)
+{
+ if (mips_opts.mips16)
+ return (ip->insn_mo->pinfo & (MIPS16_INSN_UNCOND_BRANCH
+ | MIPS16_INSN_COND_BRANCH)) != 0;
+ else
+ return (ip->insn_mo->pinfo2 & (INSN2_UNCOND_BRANCH
+ | INSN2_COND_BRANCH)) != 0;
+}
+
+/* Return true if IP is an unconditional branch or jump. */
+
+static inline bfd_boolean
+uncond_branch_p (const struct mips_cl_insn *ip)
+{
+ return ((ip->insn_mo->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0
+ || (mips_opts.mips16
+ ? (ip->insn_mo->pinfo & MIPS16_INSN_UNCOND_BRANCH) != 0
+ : (ip->insn_mo->pinfo2 & INSN2_UNCOND_BRANCH) != 0));
+}
+
+/* Return true if IP is a branch-likely instruction. */
+
+static inline bfd_boolean
+branch_likely_p (const struct mips_cl_insn *ip)
+{
+ return (ip->insn_mo->pinfo & INSN_COND_BRANCH_LIKELY) != 0;
+}
+
+/* Return the type of nop that should be used to fill the delay slot
+ of delayed branch IP. */
+
+static struct mips_cl_insn *
+get_delay_slot_nop (const struct mips_cl_insn *ip)
+{
+ if (mips_opts.micromips
+ && (ip->insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ return µmips_nop32_insn;
+ return NOP_INSN;
+}
+
+/* Return the mask of core registers that IP reads or writes. */
+
+static unsigned int
+gpr_mod_mask (const struct mips_cl_insn *ip)
+{
+ unsigned long pinfo2;
+ unsigned int mask;
+
+ mask = 0;
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (mips_opts.micromips)
+ {
+ if (pinfo2 & INSN2_MOD_GPR_MD)
+ mask |= 1 << micromips_to_32_reg_d_map[EXTRACT_OPERAND (1, MD, *ip)];
+ if (pinfo2 & INSN2_MOD_GPR_MF)
+ mask |= 1 << micromips_to_32_reg_f_map[EXTRACT_OPERAND (1, MF, *ip)];
+ if (pinfo2 & INSN2_MOD_SP)
+ mask |= 1 << SP;
+ }
+ return mask;
+}
+
+/* Return the mask of core registers that IP reads. */
+
+static unsigned int
+gpr_read_mask (const struct mips_cl_insn *ip)
+{
+ unsigned long pinfo, pinfo2;
+ unsigned int mask;
+
+ mask = gpr_mod_mask (ip);
+ pinfo = ip->insn_mo->pinfo;
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (mips_opts.mips16)
+ {
+ if (pinfo & MIPS16_INSN_READ_X)
+ mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)];
+ if (pinfo & MIPS16_INSN_READ_Y)
+ mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)];
+ if (pinfo & MIPS16_INSN_READ_T)
+ mask |= 1 << TREG;
+ if (pinfo & MIPS16_INSN_READ_SP)
+ mask |= 1 << SP;
+ if (pinfo & MIPS16_INSN_READ_31)
+ mask |= 1 << RA;
+ if (pinfo & MIPS16_INSN_READ_Z)
+ mask |= 1 << (mips16_to_32_reg_map
+ [MIPS16_EXTRACT_OPERAND (MOVE32Z, *ip)]);
+ if (pinfo & MIPS16_INSN_READ_GPR_X)
+ mask |= 1 << MIPS16_EXTRACT_OPERAND (REGR32, *ip);
+ }
+ else
+ {
+ if (pinfo2 & INSN2_READ_GPR_D)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
+ if (pinfo & INSN_READ_GPR_T)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
+ if (pinfo & INSN_READ_GPR_S)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
+ if (pinfo2 & INSN2_READ_GP)
+ mask |= 1 << GP;
+ if (pinfo2 & INSN2_READ_GPR_31)
+ mask |= 1 << RA;
+ if (pinfo2 & INSN2_READ_GPR_Z)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RZ, *ip);
+ }
+ if (mips_opts.micromips)
+ {
+ if (pinfo2 & INSN2_READ_GPR_MC)
+ mask |= 1 << micromips_to_32_reg_c_map[EXTRACT_OPERAND (1, MC, *ip)];
+ if (pinfo2 & INSN2_READ_GPR_ME)
+ mask |= 1 << micromips_to_32_reg_e_map[EXTRACT_OPERAND (1, ME, *ip)];
+ if (pinfo2 & INSN2_READ_GPR_MG)
+ mask |= 1 << micromips_to_32_reg_g_map[EXTRACT_OPERAND (1, MG, *ip)];
+ if (pinfo2 & INSN2_READ_GPR_MJ)
+ mask |= 1 << EXTRACT_OPERAND (1, MJ, *ip);
+ if (pinfo2 & INSN2_READ_GPR_MMN)
+ {
+ mask |= 1 << micromips_to_32_reg_m_map[EXTRACT_OPERAND (1, MM, *ip)];
+ mask |= 1 << micromips_to_32_reg_n_map[EXTRACT_OPERAND (1, MN, *ip)];
+ }
+ if (pinfo2 & INSN2_READ_GPR_MP)
+ mask |= 1 << EXTRACT_OPERAND (1, MP, *ip);
+ if (pinfo2 & INSN2_READ_GPR_MQ)
+ mask |= 1 << micromips_to_32_reg_q_map[EXTRACT_OPERAND (1, MQ, *ip)];
+ }
+ /* Don't include register 0. */
+ return mask & ~1;
+}
+
+/* Return the mask of core registers that IP writes. */
+
+static unsigned int
+gpr_write_mask (const struct mips_cl_insn *ip)
+{
+ unsigned long pinfo, pinfo2;
+ unsigned int mask;
+
+ mask = gpr_mod_mask (ip);
+ pinfo = ip->insn_mo->pinfo;
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (mips_opts.mips16)
+ {
+ if (pinfo & MIPS16_INSN_WRITE_X)
+ mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)];
+ if (pinfo & MIPS16_INSN_WRITE_Y)
+ mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)];
+ if (pinfo & MIPS16_INSN_WRITE_Z)
+ mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RZ, *ip)];
+ if (pinfo & MIPS16_INSN_WRITE_T)
+ mask |= 1 << TREG;
+ if (pinfo & MIPS16_INSN_WRITE_SP)
+ mask |= 1 << SP;
+ if (pinfo & MIPS16_INSN_WRITE_31)
+ mask |= 1 << RA;
+ if (pinfo & MIPS16_INSN_WRITE_GPR_Y)
+ mask |= 1 << MIPS16OP_EXTRACT_REG32R (ip->insn_opcode);
+ }
+ else
+ {
+ if (pinfo & INSN_WRITE_GPR_D)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
+ if (pinfo & INSN_WRITE_GPR_T)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
+ if (pinfo & INSN_WRITE_GPR_S)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
+ if (pinfo & INSN_WRITE_GPR_31)
+ mask |= 1 << RA;
+ if (pinfo2 & INSN2_WRITE_GPR_Z)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RZ, *ip);
+ }
+ if (mips_opts.micromips)
+ {
+ if (pinfo2 & INSN2_WRITE_GPR_MB)
+ mask |= 1 << micromips_to_32_reg_b_map[EXTRACT_OPERAND (1, MB, *ip)];
+ if (pinfo2 & INSN2_WRITE_GPR_MHI)
+ {
+ mask |= 1 << micromips_to_32_reg_h_map[EXTRACT_OPERAND (1, MH, *ip)];
+ mask |= 1 << micromips_to_32_reg_i_map[EXTRACT_OPERAND (1, MI, *ip)];
+ }
+ if (pinfo2 & INSN2_WRITE_GPR_MJ)
+ mask |= 1 << EXTRACT_OPERAND (1, MJ, *ip);
+ if (pinfo2 & INSN2_WRITE_GPR_MP)
+ mask |= 1 << EXTRACT_OPERAND (1, MP, *ip);
+ }
+ /* Don't include register 0. */
+ return mask & ~1;
+}
+
+/* Return the mask of floating-point registers that IP reads. */
+
+static unsigned int
+fpr_read_mask (const struct mips_cl_insn *ip)
+{
+ unsigned long pinfo, pinfo2;
+ unsigned int mask;
+
+ mask = 0;
+ pinfo = ip->insn_mo->pinfo;
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (!mips_opts.mips16)
+ {
+ if (pinfo2 & INSN2_READ_FPR_D)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FD, *ip);
+ if (pinfo & INSN_READ_FPR_S)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FS, *ip);
+ if (pinfo & INSN_READ_FPR_T)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FT, *ip);
+ if (pinfo & INSN_READ_FPR_R)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FR, *ip);
+ if (pinfo2 & INSN2_READ_FPR_Z)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FZ, *ip);
+ }
+ /* Conservatively treat all operands to an FP_D instruction are doubles.
+ (This is overly pessimistic for things like cvt.d.s.) */
+ if (HAVE_32BIT_FPRS && (pinfo & FP_D))
+ mask |= mask << 1;
+ return mask;
+}
+
+/* Return the mask of floating-point registers that IP writes. */
+
+static unsigned int
+fpr_write_mask (const struct mips_cl_insn *ip)
+{
+ unsigned long pinfo, pinfo2;
+ unsigned int mask;
+
+ mask = 0;
+ pinfo = ip->insn_mo->pinfo;
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (!mips_opts.mips16)
+ {
+ if (pinfo & INSN_WRITE_FPR_D)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FD, *ip);
+ if (pinfo & INSN_WRITE_FPR_S)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FS, *ip);
+ if (pinfo & INSN_WRITE_FPR_T)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FT, *ip);
+ if (pinfo2 & INSN2_WRITE_FPR_Z)
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FZ, *ip);
+ }
+ /* Conservatively treat all operands to an FP_D instruction are doubles.
+ (This is overly pessimistic for things like cvt.s.d.) */
+ if (HAVE_32BIT_FPRS && (pinfo & FP_D))
+ mask |= mask << 1;
+ return mask;
+}
+
/* Classify an instruction according to the FIX_VR4120_* enumeration.
Return NUM_FIX_VR4120_CLASSES if the instruction isn't affected
by VR4120 errata. */
const struct mips_cl_insn *insn2)
{
unsigned long pinfo1, pinfo2;
+ unsigned int mask;
/* This function needs to know which pinfo flags are set for INSN2
and which registers INSN2 uses. The former is stored in PINFO2 and
- the latter is tested via INSN2_USES_REG. If INSN2 is null, PINFO2
- will have every flag set and INSN2_USES_REG will always return true. */
+ the latter is tested via INSN2_USES_GPR. If INSN2 is null, PINFO2
+ will have every flag set and INSN2_USES_GPR will always return true. */
pinfo1 = insn1->insn_mo->pinfo;
pinfo2 = insn2 ? insn2->insn_mo->pinfo : ~0U;
-#define INSN2_USES_REG(REG, CLASS) \
- (insn2 == NULL || insn_uses_reg (insn2, REG, CLASS))
+#define INSN2_USES_GPR(REG) \
+ (insn2 == NULL || (gpr_read_mask (insn2) & (1U << (REG))) != 0)
/* For most targets, write-after-read dependencies on the HI and LO
registers must be separated by at least two instructions. */
/* If we're working around r7000 errata, there must be two instructions
between an mfhi or mflo and any instruction that uses the result. */
if (mips_7000_hilo_fix
+ && !mips_opts.micromips
&& MF_HILO_INSN (pinfo1)
- && INSN2_USES_REG (EXTRACT_OPERAND (RD, *insn1), MIPS_GR_REG))
+ && INSN2_USES_GPR (EXTRACT_OPERAND (0, RD, *insn1)))
return 2;
/* If we're working around 24K errata, one instruction is required
if an ERET or DERET is followed by a branch instruction. */
- if (mips_fix_24k)
+ if (mips_fix_24k && !mips_opts.micromips)
{
if (insn1->insn_opcode == INSN_ERET
|| insn1->insn_opcode == INSN_DERET)
if (insn2 == NULL
|| insn2->insn_opcode == INSN_ERET
|| insn2->insn_opcode == INSN_DERET
- || (insn2->insn_mo->pinfo
- & (INSN_UNCOND_BRANCH_DELAY
- | INSN_COND_BRANCH_DELAY
- | INSN_COND_BRANCH_LIKELY)) != 0)
+ || delayed_branch_p (insn2))
return 1;
}
}
/* If working around VR4120 errata, check for combinations that need
a single intervening instruction. */
- if (mips_fix_vr4120)
+ if (mips_fix_vr4120 && !mips_opts.micromips)
{
unsigned int class1, class2;
}
}
- if (!mips_opts.mips16)
+ if (!HAVE_CODE_COMPRESSION)
{
/* Check for GPR or coprocessor load delays. All such delays
are on the RT register. */
|| (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC_DELAY)))
{
know (pinfo1 & INSN_WRITE_GPR_T);
- if (INSN2_USES_REG (EXTRACT_OPERAND (RT, *insn1), MIPS_GR_REG))
+ if (INSN2_USES_GPR (EXTRACT_OPERAND (0, RT, *insn1)))
return 1;
}
/* Handle cases where INSN1 writes to a known general coprocessor
register. There must be a one instruction delay before INSN2
if INSN2 reads that register, otherwise no delay is needed. */
- if (pinfo1 & INSN_WRITE_FPR_T)
+ mask = fpr_write_mask (insn1);
+ if (mask != 0)
{
- if (INSN2_USES_REG (EXTRACT_OPERAND (FT, *insn1), MIPS_FP_REG))
- return 1;
- }
- else if (pinfo1 & INSN_WRITE_FPR_S)
- {
- if (INSN2_USES_REG (EXTRACT_OPERAND (FS, *insn1), MIPS_FP_REG))
+ if (!insn2 || (mask & fpr_read_mask (insn2)) != 0)
return 1;
}
else
return 1;
}
-#undef INSN2_USES_REG
+#undef INSN2_USES_GPR
return 0;
}
nops_for_vr4130 (int ignore, const struct mips_cl_insn *hist,
const struct mips_cl_insn *insn)
{
- int i, j, reg;
+ int i, j;
+ unsigned int mask;
/* Check if the instruction writes to HI or LO. MTHI and MTLO
are not affected by the errata. */
if (MF_HILO_INSN (hist[i].insn_mo->pinfo))
{
/* Extract the destination register. */
- if (mips_opts.mips16)
- reg = mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, hist[i])];
- else
- reg = EXTRACT_OPERAND (RD, hist[i]);
+ mask = gpr_write_mask (&hist[i]);
/* No nops are needed if INSN reads that register. */
- if (insn != NULL && insn_uses_reg (insn, reg, MIPS_GR_REG))
+ if (insn != NULL && (gpr_read_mask (insn) & mask) != 0)
return 0;
/* ...or if any of the intervening instructions do. */
for (j = 0; j < i; j++)
- if (insn_uses_reg (&hist[j], reg, MIPS_GR_REG))
+ if (gpr_read_mask (&hist[j]) & mask)
return 0;
if (i >= ignore)
nops = tmp_nops;
}
- if (mips_fix_vr4130)
+ if (mips_fix_vr4130 && !mips_opts.micromips)
{
tmp_nops = nops_for_vr4130 (ignore, hist, insn);
if (tmp_nops > nops)
nops = tmp_nops;
}
- if (mips_fix_24k)
+ if (mips_fix_24k && !mips_opts.micromips)
{
tmp_nops = nops_for_24k (ignore, hist, insn);
if (tmp_nops > nops)
int nops, tmp_nops;
nops = nops_for_insn (ignore, hist, insn);
- if (insn->insn_mo->pinfo & (INSN_UNCOND_BRANCH_DELAY
- | INSN_COND_BRANCH_DELAY
- | INSN_COND_BRANCH_LIKELY))
+ if (delayed_branch_p (insn))
{
tmp_nops = nops_for_sequence (2, ignore ? ignore + 2 : 0,
- hist, insn, NOP_INSN);
+ hist, insn, get_delay_slot_nop (insn));
if (tmp_nops > nops)
nops = tmp_nops;
}
- else if (mips_opts.mips16
- && (insn->insn_mo->pinfo & (MIPS16_INSN_UNCOND_BRANCH
- | MIPS16_INSN_COND_BRANCH)))
+ else if (compact_branch_p (insn))
{
tmp_nops = nops_for_sequence (1, ignore ? ignore + 1 : 0, hist, insn);
if (tmp_nops > nops)
static void
fix_loongson2f_nop (struct mips_cl_insn * ip)
{
+ gas_assert (!HAVE_CODE_COMPRESSION);
if (strcmp (ip->insn_mo->name, "nop") == 0)
ip->insn_opcode = LOONGSON2F_NOP_INSN;
}
static void
fix_loongson2f_jump (struct mips_cl_insn * ip)
{
+ gas_assert (!HAVE_CODE_COMPRESSION);
if (strcmp (ip->insn_mo->name, "j") == 0
|| strcmp (ip->insn_mo->name, "jr") == 0
|| strcmp (ip->insn_mo->name, "jalr") == 0)
if (! mips_opts.at)
return;
- sreg = EXTRACT_OPERAND (RS, *ip);
+ sreg = EXTRACT_OPERAND (0, RS, *ip);
if (sreg == ZERO || sreg == KT0 || sreg == KT1 || sreg == ATREG)
return;
fix_loongson2f_jump (ip);
}
-/* Output an instruction. IP is the instruction information.
+/* IP is a branch that has a delay slot, and we need to fill it
+ automatically. Return true if we can do that by swapping IP
+ with the previous instruction.
ADDRESS_EXPR is an operand of the instruction to be used with
RELOC_TYPE. */
-static void
-append_insn (struct mips_cl_insn *ip, expressionS *address_expr,
- bfd_reloc_code_real_type *reloc_type)
+static bfd_boolean
+can_swap_branch_p (struct mips_cl_insn *ip, expressionS *address_expr,
+ bfd_reloc_code_real_type *reloc_type)
{
- unsigned long prev_pinfo, pinfo;
- unsigned long prev_pinfo2, pinfo2;
- relax_stateT prev_insn_frag_type = 0;
- bfd_boolean relaxed_branch = FALSE;
- segment_info_type *si = seg_info (now_seg);
+ unsigned long pinfo, pinfo2, prev_pinfo, prev_pinfo2;
+ unsigned int gpr_read, gpr_write, prev_gpr_read, prev_gpr_write;
- if (mips_fix_loongson2f)
- fix_loongson2f (ip);
+ /* -O2 and above is required for this optimization. */
+ if (mips_optimize < 2)
+ return FALSE;
- /* Mark instruction labels in mips16 mode. */
- mips16_mark_labels ();
+ /* If we have seen .set volatile or .set nomove, don't optimize. */
+ if (mips_opts.nomove)
+ return FALSE;
- file_ase_mips16 |= mips_opts.mips16;
+ /* We can't swap if the previous instruction's position is fixed. */
+ if (history[0].fixed_p)
+ return FALSE;
- prev_pinfo = history[0].insn_mo->pinfo;
- prev_pinfo2 = history[0].insn_mo->pinfo2;
- pinfo = ip->insn_mo->pinfo;
- pinfo2 = ip->insn_mo->pinfo2;
+ /* If the previous previous insn was in a .set noreorder, we can't
+ swap. Actually, the MIPS assembler will swap in this situation.
+ However, gcc configured -with-gnu-as will generate code like
- if (address_expr == NULL)
- ip->complete_p = 1;
- else if (*reloc_type <= BFD_RELOC_UNUSED
- && address_expr->X_op == O_constant)
- {
- unsigned int tmp;
+ .set noreorder
+ lw $4,XXX
+ .set reorder
+ INSN
+ bne $4,$0,foo
- ip->complete_p = 1;
- switch (*reloc_type)
- {
- case BFD_RELOC_32:
- ip->insn_opcode |= address_expr->X_add_number;
- break;
+ in which we can not swap the bne and INSN. If gcc is not configured
+ -with-gnu-as, it does not output the .set pseudo-ops. */
+ if (history[1].noreorder_p)
+ return FALSE;
- case BFD_RELOC_MIPS_HIGHEST:
- tmp = (address_expr->X_add_number + 0x800080008000ull) >> 48;
- ip->insn_opcode |= tmp & 0xffff;
- break;
+ /* If the previous instruction had a fixup in mips16 mode, we can not swap.
+ This means that the previous instruction was a 4-byte one anyhow. */
+ if (mips_opts.mips16 && history[0].fixp[0])
+ return FALSE;
- case BFD_RELOC_MIPS_HIGHER:
- tmp = (address_expr->X_add_number + 0x80008000ull) >> 32;
- ip->insn_opcode |= tmp & 0xffff;
- break;
+ /* If the branch is itself the target of a branch, we can not swap.
+ We cheat on this; all we check for is whether there is a label on
+ this instruction. If there are any branches to anything other than
+ a label, users must use .set noreorder. */
+ if (seg_info (now_seg)->label_list)
+ return FALSE;
- case BFD_RELOC_HI16_S:
- tmp = (address_expr->X_add_number + 0x8000) >> 16;
- ip->insn_opcode |= tmp & 0xffff;
- break;
+ /* If the previous instruction is in a variant frag other than this
+ branch's one, we cannot do the swap. This does not apply to
+ MIPS16 code, which uses variant frags for different purposes. */
+ if (!mips_opts.mips16
+ && history[0].frag
+ && history[0].frag->fr_type == rs_machine_dependent)
+ return FALSE;
- case BFD_RELOC_HI16:
- ip->insn_opcode |= (address_expr->X_add_number >> 16) & 0xffff;
- break;
+ /* We do not swap with instructions that cannot architecturally
+ be placed in a branch delay slot, such as SYNC or ERET. We
+ also refrain from swapping with a trap instruction, since it
+ complicates trap handlers to have the trap instruction be in
+ a delay slot. */
+ prev_pinfo = history[0].insn_mo->pinfo;
+ if (prev_pinfo & INSN_NO_DELAY_SLOT)
+ return FALSE;
- case BFD_RELOC_UNUSED:
- case BFD_RELOC_LO16:
- case BFD_RELOC_MIPS_GOT_DISP:
- ip->insn_opcode |= address_expr->X_add_number & 0xffff;
- break;
+ /* Check for conflicts between the branch and the instructions
+ before the candidate delay slot. */
+ if (nops_for_insn (0, history + 1, ip) > 0)
+ return FALSE;
- case BFD_RELOC_MIPS_JMP:
- if ((address_expr->X_add_number & 3) != 0)
- as_bad (_("jump to misaligned address (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- ip->insn_opcode |= (address_expr->X_add_number >> 2) & 0x3ffffff;
- ip->complete_p = 0;
- break;
+ /* Check for conflicts between the swapped sequence and the
+ target of the branch. */
+ if (nops_for_sequence (2, 0, history + 1, ip, history) > 0)
+ return FALSE;
- case BFD_RELOC_MIPS16_JMP:
- if ((address_expr->X_add_number & 3) != 0)
- as_bad (_("jump to misaligned address (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- ip->insn_opcode |=
- (((address_expr->X_add_number & 0x7c0000) << 3)
- | ((address_expr->X_add_number & 0xf800000) >> 7)
- | ((address_expr->X_add_number & 0x3fffc) >> 2));
- ip->complete_p = 0;
- break;
+ /* If the branch reads a register that the previous
+ instruction sets, we can not swap. */
+ gpr_read = gpr_read_mask (ip);
+ prev_gpr_write = gpr_write_mask (&history[0]);
+ if (gpr_read & prev_gpr_write)
+ return FALSE;
- case BFD_RELOC_16_PCREL_S2:
- if ((address_expr->X_add_number & 3) != 0)
- as_bad (_("branch to misaligned address (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- if (mips_relax_branch)
- goto need_reloc;
- if ((address_expr->X_add_number + 0x20000) & ~0x3ffff)
- as_bad (_("branch address range overflow (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
- ip->insn_opcode |= (address_expr->X_add_number >> 2) & 0xffff;
- ip->complete_p = 0;
- break;
+ /* If the branch writes a register that the previous
+ instruction sets, we can not swap. */
+ gpr_write = gpr_write_mask (ip);
+ if (gpr_write & prev_gpr_write)
+ return FALSE;
+
+ /* If the branch writes a register that the previous
+ instruction reads, we can not swap. */
+ prev_gpr_read = gpr_read_mask (&history[0]);
+ if (gpr_write & prev_gpr_read)
+ return FALSE;
+
+ /* If one instruction sets a condition code and the
+ other one uses a condition code, we can not swap. */
+ pinfo = ip->insn_mo->pinfo;
+ if ((pinfo & INSN_READ_COND_CODE)
+ && (prev_pinfo & INSN_WRITE_COND_CODE))
+ return FALSE;
+ if ((pinfo & INSN_WRITE_COND_CODE)
+ && (prev_pinfo & INSN_READ_COND_CODE))
+ return FALSE;
+
+ /* If the previous instruction uses the PC, we can not swap. */
+ prev_pinfo2 = history[0].insn_mo->pinfo2;
+ if (mips_opts.mips16 && (prev_pinfo & MIPS16_INSN_READ_PC))
+ return FALSE;
+ if (mips_opts.micromips && (prev_pinfo2 & INSN2_READ_PC))
+ return FALSE;
+
+ /* If the previous instruction has an incorrect size for a fixed
+ branch delay slot in microMIPS mode, we cannot swap. */
+ pinfo2 = ip->insn_mo->pinfo2;
+ if (mips_opts.micromips
+ && (pinfo2 & INSN2_BRANCH_DELAY_16BIT)
+ && insn_length (history) != 2)
+ return FALSE;
+ if (mips_opts.micromips
+ && (pinfo2 & INSN2_BRANCH_DELAY_32BIT)
+ && insn_length (history) != 4)
+ return FALSE;
+
+ /* On R5900 short loops need to be fixed by inserting a nop in
+ the branch delay slots.
+ A short loop can be terminated too early. */
+ if (mips_opts.arch == CPU_R5900
+ /* Check if instruction has a parameter, ignore "j $31". */
+ && (address_expr != NULL)
+ /* Parameter must be 16 bit. */
+ && (*reloc_type == BFD_RELOC_16_PCREL_S2)
+ /* Branch to same segment. */
+ && (S_GET_SEGMENT(address_expr->X_add_symbol) == now_seg)
+ /* Branch to same code fragment. */
+ && (symbol_get_frag(address_expr->X_add_symbol) == frag_now)
+ /* Can only calculate branch offset if value is known. */
+ && symbol_constant_p(address_expr->X_add_symbol)
+ /* Check if branch is really conditional. */
+ && !((ip->insn_opcode & 0xffff0000) == 0x10000000 /* beq $0,$0 */
+ || (ip->insn_opcode & 0xffff0000) == 0x04010000 /* bgez $0 */
+ || (ip->insn_opcode & 0xffff0000) == 0x04110000)) /* bgezal $0 */
+ {
+ int distance;
+ /* Check if loop is shorter than 6 instructions including
+ branch and delay slot. */
+ distance = frag_now_fix() - S_GET_VALUE(address_expr->X_add_symbol);
+ if (distance <= 20)
+ {
+ int i;
+ int rv;
+
+ rv = FALSE;
+ /* When the loop includes branches or jumps,
+ it is not a short loop. */
+ for (i = 0; i < (distance / 4); i++)
+ {
+ if ((history[i].cleared_p)
+ || delayed_branch_p(&history[i]))
+ {
+ rv = TRUE;
+ break;
+ }
+ }
+ if (rv == FALSE)
+ {
+ /* Insert nop after branch to fix short loop. */
+ return FALSE;
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+/* Decide how we should add IP to the instruction stream.
+ ADDRESS_EXPR is an operand of the instruction to be used with
+ RELOC_TYPE. */
+
+static enum append_method
+get_append_method (struct mips_cl_insn *ip, expressionS *address_expr,
+ bfd_reloc_code_real_type *reloc_type)
+{
+ unsigned long pinfo;
+
+ /* The relaxed version of a macro sequence must be inherently
+ hazard-free. */
+ if (mips_relax.sequence == 2)
+ return APPEND_ADD;
+
+ /* We must not dabble with instructions in a ".set norerorder" block. */
+ if (mips_opts.noreorder)
+ return APPEND_ADD;
+
+ /* Otherwise, it's our responsibility to fill branch delay slots. */
+ if (delayed_branch_p (ip))
+ {
+ if (!branch_likely_p (ip)
+ && can_swap_branch_p (ip, address_expr, reloc_type))
+ return APPEND_SWAP;
+
+ pinfo = ip->insn_mo->pinfo;
+ if (mips_opts.mips16
+ && ISA_SUPPORTS_MIPS16E
+ && (pinfo & (MIPS16_INSN_READ_X | MIPS16_INSN_READ_31)))
+ return APPEND_ADD_COMPACT;
+
+ return APPEND_ADD_WITH_NOP;
+ }
+
+ return APPEND_ADD;
+}
+
+/* IP is a MIPS16 instruction whose opcode we have just changed.
+ Point IP->insn_mo to the new opcode's definition. */
+
+static void
+find_altered_mips16_opcode (struct mips_cl_insn *ip)
+{
+ const struct mips_opcode *mo, *end;
+
+ end = &mips16_opcodes[bfd_mips16_num_opcodes];
+ for (mo = ip->insn_mo; mo < end; mo++)
+ if ((ip->insn_opcode & mo->mask) == mo->match)
+ {
+ ip->insn_mo = mo;
+ return;
+ }
+ abort ();
+}
+
+/* For microMIPS macros, we need to generate a local number label
+ as the target of branches. */
+#define MICROMIPS_LABEL_CHAR '\037'
+static unsigned long micromips_target_label;
+static char micromips_target_name[32];
+
+static char *
+micromips_label_name (void)
+{
+ char *p = micromips_target_name;
+ char symbol_name_temporary[24];
+ unsigned long l;
+ int i;
+
+ if (*p)
+ return p;
+
+ i = 0;
+ l = micromips_target_label;
+#ifdef LOCAL_LABEL_PREFIX
+ *p++ = LOCAL_LABEL_PREFIX;
+#endif
+ *p++ = 'L';
+ *p++ = MICROMIPS_LABEL_CHAR;
+ do
+ {
+ symbol_name_temporary[i++] = l % 10 + '0';
+ l /= 10;
+ }
+ while (l != 0);
+ while (i > 0)
+ *p++ = symbol_name_temporary[--i];
+ *p = '\0';
+
+ return micromips_target_name;
+}
+
+static void
+micromips_label_expr (expressionS *label_expr)
+{
+ label_expr->X_op = O_symbol;
+ label_expr->X_add_symbol = symbol_find_or_make (micromips_label_name ());
+ label_expr->X_add_number = 0;
+}
+
+static void
+micromips_label_inc (void)
+{
+ micromips_target_label++;
+ *micromips_target_name = '\0';
+}
+
+static void
+micromips_add_label (void)
+{
+ symbolS *s;
+
+ s = colon (micromips_label_name ());
+ micromips_label_inc ();
+#if defined(OBJ_ELF) || defined(OBJ_MAYBE_ELF)
+ if (IS_ELF)
+ S_SET_OTHER (s, ELF_ST_SET_MICROMIPS (S_GET_OTHER (s)));
+#else
+ (void) s;
+#endif
+}
+
+/* If assembling microMIPS code, then return the microMIPS reloc
+ corresponding to the requested one if any. Otherwise return
+ the reloc unchanged. */
+
+static bfd_reloc_code_real_type
+micromips_map_reloc (bfd_reloc_code_real_type reloc)
+{
+ static const bfd_reloc_code_real_type relocs[][2] =
+ {
+ /* Keep sorted incrementally by the left-hand key. */
+ { BFD_RELOC_16_PCREL_S2, BFD_RELOC_MICROMIPS_16_PCREL_S1 },
+ { BFD_RELOC_GPREL16, BFD_RELOC_MICROMIPS_GPREL16 },
+ { BFD_RELOC_MIPS_JMP, BFD_RELOC_MICROMIPS_JMP },
+ { BFD_RELOC_HI16, BFD_RELOC_MICROMIPS_HI16 },
+ { BFD_RELOC_HI16_S, BFD_RELOC_MICROMIPS_HI16_S },
+ { BFD_RELOC_LO16, BFD_RELOC_MICROMIPS_LO16 },
+ { BFD_RELOC_MIPS_LITERAL, BFD_RELOC_MICROMIPS_LITERAL },
+ { BFD_RELOC_MIPS_GOT16, BFD_RELOC_MICROMIPS_GOT16 },
+ { BFD_RELOC_MIPS_CALL16, BFD_RELOC_MICROMIPS_CALL16 },
+ { BFD_RELOC_MIPS_GOT_HI16, BFD_RELOC_MICROMIPS_GOT_HI16 },
+ { BFD_RELOC_MIPS_GOT_LO16, BFD_RELOC_MICROMIPS_GOT_LO16 },
+ { BFD_RELOC_MIPS_CALL_HI16, BFD_RELOC_MICROMIPS_CALL_HI16 },
+ { BFD_RELOC_MIPS_CALL_LO16, BFD_RELOC_MICROMIPS_CALL_LO16 },
+ { BFD_RELOC_MIPS_SUB, BFD_RELOC_MICROMIPS_SUB },
+ { BFD_RELOC_MIPS_GOT_PAGE, BFD_RELOC_MICROMIPS_GOT_PAGE },
+ { BFD_RELOC_MIPS_GOT_OFST, BFD_RELOC_MICROMIPS_GOT_OFST },
+ { BFD_RELOC_MIPS_GOT_DISP, BFD_RELOC_MICROMIPS_GOT_DISP },
+ { BFD_RELOC_MIPS_HIGHEST, BFD_RELOC_MICROMIPS_HIGHEST },
+ { BFD_RELOC_MIPS_HIGHER, BFD_RELOC_MICROMIPS_HIGHER },
+ { BFD_RELOC_MIPS_SCN_DISP, BFD_RELOC_MICROMIPS_SCN_DISP },
+ { BFD_RELOC_MIPS_TLS_GD, BFD_RELOC_MICROMIPS_TLS_GD },
+ { BFD_RELOC_MIPS_TLS_LDM, BFD_RELOC_MICROMIPS_TLS_LDM },
+ { BFD_RELOC_MIPS_TLS_DTPREL_HI16, BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16 },
+ { BFD_RELOC_MIPS_TLS_DTPREL_LO16, BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16 },
+ { BFD_RELOC_MIPS_TLS_GOTTPREL, BFD_RELOC_MICROMIPS_TLS_GOTTPREL },
+ { BFD_RELOC_MIPS_TLS_TPREL_HI16, BFD_RELOC_MICROMIPS_TLS_TPREL_HI16 },
+ { BFD_RELOC_MIPS_TLS_TPREL_LO16, BFD_RELOC_MICROMIPS_TLS_TPREL_LO16 }
+ };
+ bfd_reloc_code_real_type r;
+ size_t i;
+
+ if (!mips_opts.micromips)
+ return reloc;
+ for (i = 0; i < ARRAY_SIZE (relocs); i++)
+ {
+ r = relocs[i][0];
+ if (r > reloc)
+ return reloc;
+ if (r == reloc)
+ return relocs[i][1];
+ }
+ return reloc;
+}
+
+/* Try to resolve relocation RELOC against constant OPERAND at assembly time.
+ Return true on success, storing the resolved value in RESULT. */
+
+static bfd_boolean
+calculate_reloc (bfd_reloc_code_real_type reloc, offsetT operand,
+ offsetT *result)
+{
+ switch (reloc)
+ {
+ case BFD_RELOC_MIPS_HIGHEST:
+ case BFD_RELOC_MICROMIPS_HIGHEST:
+ *result = ((operand + 0x800080008000ull) >> 48) & 0xffff;
+ return TRUE;
+
+ case BFD_RELOC_MIPS_HIGHER:
+ case BFD_RELOC_MICROMIPS_HIGHER:
+ *result = ((operand + 0x80008000ull) >> 32) & 0xffff;
+ return TRUE;
+
+ case BFD_RELOC_HI16_S:
+ case BFD_RELOC_MICROMIPS_HI16_S:
+ case BFD_RELOC_MIPS16_HI16_S:
+ *result = ((operand + 0x8000) >> 16) & 0xffff;
+ return TRUE;
+
+ case BFD_RELOC_HI16:
+ case BFD_RELOC_MICROMIPS_HI16:
+ case BFD_RELOC_MIPS16_HI16:
+ *result = (operand >> 16) & 0xffff;
+ return TRUE;
+
+ case BFD_RELOC_LO16:
+ case BFD_RELOC_MICROMIPS_LO16:
+ case BFD_RELOC_MIPS16_LO16:
+ *result = operand & 0xffff;
+ return TRUE;
+
+ case BFD_RELOC_UNUSED:
+ *result = operand;
+ return TRUE;
+
+ default:
+ return FALSE;
+ }
+}
+
+/* Output an instruction. IP is the instruction information.
+ ADDRESS_EXPR is an operand of the instruction to be used with
+ RELOC_TYPE. EXPANSIONP is true if the instruction is part of
+ a macro expansion. */
+
+static void
+append_insn (struct mips_cl_insn *ip, expressionS *address_expr,
+ bfd_reloc_code_real_type *reloc_type, bfd_boolean expansionp)
+{
+ unsigned long prev_pinfo2, pinfo;
+ bfd_boolean relaxed_branch = FALSE;
+ enum append_method method;
+ bfd_boolean relax32;
+ int branch_disp;
+
+ if (mips_fix_loongson2f && !HAVE_CODE_COMPRESSION)
+ fix_loongson2f (ip);
+
+ file_ase_mips16 |= mips_opts.mips16;
+ file_ase_micromips |= mips_opts.micromips;
+
+ prev_pinfo2 = history[0].insn_mo->pinfo2;
+ pinfo = ip->insn_mo->pinfo;
+
+ if (mips_opts.micromips
+ && !expansionp
+ && (((prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0
+ && micromips_insn_length (ip->insn_mo) != 2)
+ || ((prev_pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
+ && micromips_insn_length (ip->insn_mo) != 4)))
+ as_warn (_("Wrong size instruction in a %u-bit branch delay slot"),
+ (prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 ? 16 : 32);
+
+ if (address_expr == NULL)
+ ip->complete_p = 1;
+ else if (reloc_type[0] <= BFD_RELOC_UNUSED
+ && reloc_type[1] == BFD_RELOC_UNUSED
+ && reloc_type[2] == BFD_RELOC_UNUSED
+ && address_expr->X_op == O_constant)
+ {
+ switch (*reloc_type)
+ {
+ case BFD_RELOC_MIPS_JMP:
+ {
+ int shift;
+
+ shift = mips_opts.micromips ? 1 : 2;
+ if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
+ as_bad (_("jump to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= ((address_expr->X_add_number >> shift)
+ & 0x3ffffff);
+ ip->complete_p = 1;
+ }
+ break;
+
+ case BFD_RELOC_MIPS16_JMP:
+ if ((address_expr->X_add_number & 3) != 0)
+ as_bad (_("jump to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |=
+ (((address_expr->X_add_number & 0x7c0000) << 3)
+ | ((address_expr->X_add_number & 0xf800000) >> 7)
+ | ((address_expr->X_add_number & 0x3fffc) >> 2));
+ ip->complete_p = 1;
+ break;
+
+ case BFD_RELOC_16_PCREL_S2:
+ {
+ int shift;
+
+ shift = mips_opts.micromips ? 1 : 2;
+ if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
+ as_bad (_("branch to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ if (!mips_relax_branch)
+ {
+ if ((address_expr->X_add_number + (1 << (shift + 15)))
+ & ~((1 << (shift + 16)) - 1))
+ as_bad (_("branch address range overflow (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= ((address_expr->X_add_number >> shift)
+ & 0xffff);
+ }
+ }
+ break;
default:
- internalError ();
- }
+ {
+ offsetT value;
+
+ if (calculate_reloc (*reloc_type, address_expr->X_add_number,
+ &value))
+ {
+ ip->insn_opcode |= value & 0xffff;
+ ip->complete_p = 1;
+ }
+ }
+ break;
+ }
}
if (mips_relax.sequence != 2 && !mips_opts.noreorder)
old_frag_offset = frag_now_fix ();
for (i = 0; i < nops; i++)
- emit_nop ();
+ add_fixed_insn (NOP_INSN);
+ insert_into_history (0, nops, NOP_INSN);
if (listing)
{
frag_grow (40);
}
- mips_move_labels ();
+ mips_move_text_labels ();
#ifndef NO_ECOFF_DEBUGGING
if (ECOFF_DEBUGGING)
{
/* Allow this instruction to replace one of the nops that was
tentatively added to prev_nop_frag. */
- prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
+ prev_nop_frag->fr_fix -= NOP_INSN_SIZE;
prev_nop_frag_holds--;
prev_nop_frag_since++;
}
}
+ method = get_append_method (ip, address_expr, reloc_type);
+ branch_disp = method == APPEND_SWAP ? insn_length (history) : 0;
+
#ifdef OBJ_ELF
- /* The value passed to dwarf2_emit_insn is the distance between
- the beginning of the current instruction and the address that
- should be recorded in the debug tables. For MIPS16 debug info
- we want to use ISA-encoded addresses, so we pass -1 for an
- address higher by one than the current. */
- dwarf2_emit_insn (mips_opts.mips16 ? -1 : 0);
+ dwarf2_emit_insn (0);
+ /* We want MIPS16 and microMIPS debug info to use ISA-encoded addresses,
+ so "move" the instruction address accordingly.
+
+ Also, it doesn't seem appropriate for the assembler to reorder .loc
+ entries. If this instruction is a branch that we are going to swap
+ with the previous instruction, the two instructions should be
+ treated as a unit, and the debug information for both instructions
+ should refer to the start of the branch sequence. Using the
+ current position is certainly wrong when swapping a 32-bit branch
+ and a 16-bit delay slot, since the current position would then be
+ in the middle of a branch. */
+ dwarf2_move_insn ((HAVE_CODE_COMPRESSION ? 1 : 0) - branch_disp);
#endif
- /* Record the frag type before frag_var. */
- if (history[0].frag)
- prev_insn_frag_type = history[0].frag->fr_type;
-
- if (address_expr
+ relax32 = (mips_relax_branch
+ /* Don't try branch relaxation within .set nomacro, or within
+ .set noat if we use $at for PIC computations. If it turns
+ out that the branch was out-of-range, we'll get an error. */
+ && !mips_opts.warn_about_macros
+ && (mips_opts.at || mips_pic == NO_PIC)
+ /* Don't relax BPOSGE32/64 or BC1ANY2T/F and BC1ANY4T/F
+ as they have no complementing branches. */
+ && !(ip->insn_mo->ase & (ASE_MIPS3D | ASE_DSP64 | ASE_DSP)));
+
+ if (!HAVE_CODE_COMPRESSION
+ && address_expr
+ && relax32
&& *reloc_type == BFD_RELOC_16_PCREL_S2
- && (pinfo & INSN_UNCOND_BRANCH_DELAY || pinfo & INSN_COND_BRANCH_DELAY
- || pinfo & INSN_COND_BRANCH_LIKELY)
- && mips_relax_branch
- /* Don't try branch relaxation within .set nomacro, or within
- .set noat if we use $at for PIC computations. If it turns
- out that the branch was out-of-range, we'll get an error. */
- && !mips_opts.warn_about_macros
- && (mips_opts.at || mips_pic == NO_PIC)
- /* Don't relax BPOSGE32/64 as they have no complementing branches. */
- && !(ip->insn_mo->membership & (INSN_DSP64 | INSN_DSP))
- && !mips_opts.mips16)
+ && delayed_branch_p (ip))
{
relaxed_branch = TRUE;
add_relaxed_insn (ip, (relaxed_branch_length
(NULL, NULL,
- (pinfo & INSN_UNCOND_BRANCH_DELAY) ? -1
- : (pinfo & INSN_COND_BRANCH_LIKELY) ? 1
+ uncond_branch_p (ip) ? -1
+ : branch_likely_p (ip) ? 1
: 0)), 4,
RELAX_BRANCH_ENCODE
(AT,
- pinfo & INSN_UNCOND_BRANCH_DELAY,
- pinfo & INSN_COND_BRANCH_LIKELY,
+ uncond_branch_p (ip),
+ branch_likely_p (ip),
pinfo & INSN_WRITE_GPR_31,
0),
address_expr->X_add_symbol,
address_expr->X_add_number);
*reloc_type = BFD_RELOC_UNUSED;
}
- else if (*reloc_type > BFD_RELOC_UNUSED)
+ else if (mips_opts.micromips
+ && address_expr
+ && ((relax32 && *reloc_type == BFD_RELOC_16_PCREL_S2)
+ || *reloc_type > BFD_RELOC_UNUSED)
+ && (delayed_branch_p (ip) || compact_branch_p (ip))
+ /* Don't try branch relaxation when users specify
+ 16-bit/32-bit instructions. */
+ && !forced_insn_length)
+ {
+ bfd_boolean relax16 = *reloc_type > BFD_RELOC_UNUSED;
+ int type = relax16 ? *reloc_type - BFD_RELOC_UNUSED : 0;
+ int uncond = uncond_branch_p (ip) ? -1 : 0;
+ int compact = compact_branch_p (ip);
+ int al = pinfo & INSN_WRITE_GPR_31;
+ int length32;
+
+ gas_assert (address_expr != NULL);
+ gas_assert (!mips_relax.sequence);
+
+ relaxed_branch = TRUE;
+ length32 = relaxed_micromips_32bit_branch_length (NULL, NULL, uncond);
+ add_relaxed_insn (ip, relax32 ? length32 : 4, relax16 ? 2 : 4,
+ RELAX_MICROMIPS_ENCODE (type, AT, uncond, compact, al,
+ relax32, 0, 0),
+ address_expr->X_add_symbol,
+ address_expr->X_add_number);
+ *reloc_type = BFD_RELOC_UNUSED;
+ }
+ else if (mips_opts.mips16 && *reloc_type > BFD_RELOC_UNUSED)
{
/* We need to set up a variant frag. */
- gas_assert (mips_opts.mips16 && address_expr != NULL);
+ gas_assert (address_expr != NULL);
add_relaxed_insn (ip, 4, 0,
RELAX_MIPS16_ENCODE
(*reloc_type - BFD_RELOC_UNUSED,
- mips16_small, mips16_ext,
- prev_pinfo & INSN_UNCOND_BRANCH_DELAY,
+ forced_insn_length == 2, forced_insn_length == 4,
+ delayed_branch_p (&history[0]),
history[0].mips16_absolute_jump_p),
make_expr_symbol (address_expr), 0);
}
- else if (mips_opts.mips16
- && ! ip->use_extend
- && *reloc_type != BFD_RELOC_MIPS16_JMP)
+ else if (mips_opts.mips16 && insn_length (ip) == 2)
{
- if ((pinfo & INSN_UNCOND_BRANCH_DELAY) == 0)
+ if (!delayed_branch_p (ip))
/* Make sure there is enough room to swap this instruction with
a following jump instruction. */
frag_grow (6);
{
if (mips_opts.mips16
&& mips_opts.noreorder
- && (prev_pinfo & INSN_UNCOND_BRANCH_DELAY) != 0)
+ && delayed_branch_p (&history[0]))
as_warn (_("extended instruction in delay slot"));
if (mips_relax.sequence)
written so far. */
if (frag_room () < 4)
relax_close_frag ();
- mips_relax.sizes[mips_relax.sequence - 1] += 4;
+ mips_relax.sizes[mips_relax.sequence - 1] += insn_length (ip);
}
if (mips_relax.sequence != 2)
- mips_macro_warning.sizes[0] += 4;
+ {
+ if (mips_macro_warning.first_insn_sizes[0] == 0)
+ mips_macro_warning.first_insn_sizes[0] = insn_length (ip);
+ mips_macro_warning.sizes[0] += insn_length (ip);
+ mips_macro_warning.insns[0]++;
+ }
if (mips_relax.sequence != 1)
- mips_macro_warning.sizes[1] += 4;
+ {
+ if (mips_macro_warning.first_insn_sizes[1] == 0)
+ mips_macro_warning.first_insn_sizes[1] = insn_length (ip);
+ mips_macro_warning.sizes[1] += insn_length (ip);
+ mips_macro_warning.insns[1]++;
+ }
if (mips_opts.mips16)
{
add_fixed_insn (ip);
}
- if (address_expr != NULL && *reloc_type <= BFD_RELOC_UNUSED)
+ if (!ip->complete_p && *reloc_type < BFD_RELOC_UNUSED)
{
- if (!ip->complete_p
- && *reloc_type < BFD_RELOC_UNUSED)
- need_reloc:
- {
- reloc_howto_type *howto;
- int i;
+ bfd_reloc_code_real_type final_type[3];
+ reloc_howto_type *howto0;
+ reloc_howto_type *howto;
+ int i;
- /* In a compound relocation, it is the final (outermost)
- operator that determines the relocated field. */
- for (i = 1; i < 3; i++)
- if (reloc_type[i] == BFD_RELOC_UNUSED)
- break;
+ /* Perform any necessary conversion to microMIPS relocations
+ and find out how many relocations there actually are. */
+ for (i = 0; i < 3 && reloc_type[i] != BFD_RELOC_UNUSED; i++)
+ final_type[i] = micromips_map_reloc (reloc_type[i]);
- howto = bfd_reloc_type_lookup (stdoutput, reloc_type[i - 1]);
- if (howto == NULL)
- {
- /* To reproduce this failure try assembling gas/testsuites/
- gas/mips/mips16-intermix.s with a mips-ecoff targeted
- assembler. */
- as_bad (_("Unsupported MIPS relocation number %d"), reloc_type[i - 1]);
- howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_16);
- }
-
- ip->fixp[0] = fix_new_exp (ip->frag, ip->where,
- bfd_get_reloc_size (howto),
- address_expr,
- reloc_type[0] == BFD_RELOC_16_PCREL_S2,
- reloc_type[0]);
-
- /* Tag symbols that have a R_MIPS16_26 relocation against them. */
- if (reloc_type[0] == BFD_RELOC_MIPS16_JMP
- && ip->fixp[0]->fx_addsy)
- *symbol_get_tc (ip->fixp[0]->fx_addsy) = 1;
+ /* In a compound relocation, it is the final (outermost)
+ operator that determines the relocated field. */
+ howto = howto0 = bfd_reloc_type_lookup (stdoutput, final_type[i - 1]);
- /* These relocations can have an addend that won't fit in
- 4 octets for 64bit assembly. */
- if (HAVE_64BIT_GPRS
- && ! howto->partial_inplace
- && (reloc_type[0] == BFD_RELOC_16
- || reloc_type[0] == BFD_RELOC_32
- || reloc_type[0] == BFD_RELOC_MIPS_JMP
- || reloc_type[0] == BFD_RELOC_GPREL16
- || reloc_type[0] == BFD_RELOC_MIPS_LITERAL
- || reloc_type[0] == BFD_RELOC_GPREL32
- || reloc_type[0] == BFD_RELOC_64
- || reloc_type[0] == BFD_RELOC_CTOR
- || reloc_type[0] == BFD_RELOC_MIPS_SUB
- || reloc_type[0] == BFD_RELOC_MIPS_HIGHEST
- || reloc_type[0] == BFD_RELOC_MIPS_HIGHER
- || reloc_type[0] == BFD_RELOC_MIPS_SCN_DISP
- || reloc_type[0] == BFD_RELOC_MIPS_REL16
- || reloc_type[0] == BFD_RELOC_MIPS_RELGOT
- || reloc_type[0] == BFD_RELOC_MIPS16_GPREL
- || hi16_reloc_p (reloc_type[0])
- || lo16_reloc_p (reloc_type[0])))
- ip->fixp[0]->fx_no_overflow = 1;
+ if (howto == NULL)
+ {
+ /* To reproduce this failure try assembling gas/testsuites/
+ gas/mips/mips16-intermix.s with a mips-ecoff targeted
+ assembler. */
+ as_bad (_("Unsupported MIPS relocation number %d"),
+ final_type[i - 1]);
+ howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_16);
+ }
- if (mips_relax.sequence)
- {
- if (mips_relax.first_fixup == 0)
- mips_relax.first_fixup = ip->fixp[0];
- }
- else if (reloc_needs_lo_p (*reloc_type))
- {
- struct mips_hi_fixup *hi_fixup;
+ if (i > 1)
+ howto0 = bfd_reloc_type_lookup (stdoutput, final_type[0]);
+ ip->fixp[0] = fix_new_exp (ip->frag, ip->where,
+ bfd_get_reloc_size (howto),
+ address_expr,
+ howto0 && howto0->pc_relative,
+ final_type[0]);
+
+ /* Tag symbols that have a R_MIPS16_26 relocation against them. */
+ if (final_type[0] == BFD_RELOC_MIPS16_JMP && ip->fixp[0]->fx_addsy)
+ *symbol_get_tc (ip->fixp[0]->fx_addsy) = 1;
+
+ /* These relocations can have an addend that won't fit in
+ 4 octets for 64bit assembly. */
+ if (HAVE_64BIT_GPRS
+ && ! howto->partial_inplace
+ && (reloc_type[0] == BFD_RELOC_16
+ || reloc_type[0] == BFD_RELOC_32
+ || reloc_type[0] == BFD_RELOC_MIPS_JMP
+ || reloc_type[0] == BFD_RELOC_GPREL16
+ || reloc_type[0] == BFD_RELOC_MIPS_LITERAL
+ || reloc_type[0] == BFD_RELOC_GPREL32
+ || reloc_type[0] == BFD_RELOC_64
+ || reloc_type[0] == BFD_RELOC_CTOR
+ || reloc_type[0] == BFD_RELOC_MIPS_SUB
+ || reloc_type[0] == BFD_RELOC_MIPS_HIGHEST
+ || reloc_type[0] == BFD_RELOC_MIPS_HIGHER
+ || reloc_type[0] == BFD_RELOC_MIPS_SCN_DISP
+ || reloc_type[0] == BFD_RELOC_MIPS_REL16
+ || reloc_type[0] == BFD_RELOC_MIPS_RELGOT
+ || reloc_type[0] == BFD_RELOC_MIPS16_GPREL
+ || hi16_reloc_p (reloc_type[0])
+ || lo16_reloc_p (reloc_type[0])))
+ ip->fixp[0]->fx_no_overflow = 1;
+
+ /* These relocations can have an addend that won't fit in 2 octets. */
+ if (reloc_type[0] == BFD_RELOC_MICROMIPS_7_PCREL_S1
+ || reloc_type[0] == BFD_RELOC_MICROMIPS_10_PCREL_S1)
+ ip->fixp[0]->fx_no_overflow = 1;
- /* Reuse the last entry if it already has a matching %lo. */
- hi_fixup = mips_hi_fixup_list;
- if (hi_fixup == 0
- || !fixup_has_matching_lo_p (hi_fixup->fixp))
- {
- hi_fixup = ((struct mips_hi_fixup *)
- xmalloc (sizeof (struct mips_hi_fixup)));
- hi_fixup->next = mips_hi_fixup_list;
- mips_hi_fixup_list = hi_fixup;
- }
- hi_fixup->fixp = ip->fixp[0];
- hi_fixup->seg = now_seg;
+ if (mips_relax.sequence)
+ {
+ if (mips_relax.first_fixup == 0)
+ mips_relax.first_fixup = ip->fixp[0];
+ }
+ else if (reloc_needs_lo_p (*reloc_type))
+ {
+ struct mips_hi_fixup *hi_fixup;
+
+ /* Reuse the last entry if it already has a matching %lo. */
+ hi_fixup = mips_hi_fixup_list;
+ if (hi_fixup == 0
+ || !fixup_has_matching_lo_p (hi_fixup->fixp))
+ {
+ hi_fixup = ((struct mips_hi_fixup *)
+ xmalloc (sizeof (struct mips_hi_fixup)));
+ hi_fixup->next = mips_hi_fixup_list;
+ mips_hi_fixup_list = hi_fixup;
}
+ hi_fixup->fixp = ip->fixp[0];
+ hi_fixup->seg = now_seg;
+ }
- /* Add fixups for the second and third relocations, if given.
- Note that the ABI allows the second relocation to be
- against RSS_UNDEF, RSS_GP, RSS_GP0 or RSS_LOC. At the
- moment we only use RSS_UNDEF, but we could add support
- for the others if it ever becomes necessary. */
- for (i = 1; i < 3; i++)
- if (reloc_type[i] != BFD_RELOC_UNUSED)
- {
- ip->fixp[i] = fix_new (ip->frag, ip->where,
- ip->fixp[0]->fx_size, NULL, 0,
- FALSE, reloc_type[i]);
+ /* Add fixups for the second and third relocations, if given.
+ Note that the ABI allows the second relocation to be
+ against RSS_UNDEF, RSS_GP, RSS_GP0 or RSS_LOC. At the
+ moment we only use RSS_UNDEF, but we could add support
+ for the others if it ever becomes necessary. */
+ for (i = 1; i < 3; i++)
+ if (reloc_type[i] != BFD_RELOC_UNUSED)
+ {
+ ip->fixp[i] = fix_new (ip->frag, ip->where,
+ ip->fixp[0]->fx_size, NULL, 0,
+ FALSE, final_type[i]);
- /* Use fx_tcbit to mark compound relocs. */
- ip->fixp[0]->fx_tcbit = 1;
- ip->fixp[i]->fx_tcbit = 1;
- }
- }
+ /* Use fx_tcbit to mark compound relocs. */
+ ip->fixp[0]->fx_tcbit = 1;
+ ip->fixp[i]->fx_tcbit = 1;
+ }
}
install_insn (ip);
/* Update the register mask information. */
- if (! mips_opts.mips16)
+ mips_gprmask |= gpr_read_mask (ip) | gpr_write_mask (ip);
+ mips_cprmask[1] |= fpr_read_mask (ip) | fpr_write_mask (ip);
+
+ switch (method)
{
- if ((pinfo & INSN_WRITE_GPR_D) || (pinfo2 & INSN2_READ_GPR_D))
- mips_gprmask |= 1 << EXTRACT_OPERAND (RD, *ip);
- if ((pinfo & (INSN_WRITE_GPR_T | INSN_READ_GPR_T)) != 0)
- mips_gprmask |= 1 << EXTRACT_OPERAND (RT, *ip);
- if (pinfo & INSN_READ_GPR_S)
- mips_gprmask |= 1 << EXTRACT_OPERAND (RS, *ip);
- if (pinfo & INSN_WRITE_GPR_31)
- mips_gprmask |= 1 << RA;
- if (pinfo2 & (INSN2_WRITE_GPR_Z | INSN2_READ_GPR_Z))
- mips_gprmask |= 1 << EXTRACT_OPERAND (RZ, *ip);
- if (pinfo & INSN_WRITE_FPR_D)
- mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FD, *ip);
- if ((pinfo & (INSN_WRITE_FPR_S | INSN_READ_FPR_S)) != 0)
- mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FS, *ip);
- if ((pinfo & (INSN_WRITE_FPR_T | INSN_READ_FPR_T)) != 0)
- mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FT, *ip);
- if ((pinfo & INSN_READ_FPR_R) != 0)
- mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FR, *ip);
- if (pinfo2 & (INSN2_WRITE_FPR_Z | INSN2_READ_FPR_Z))
- mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FZ, *ip);
- if (pinfo & INSN_COP)
- {
- /* We don't keep enough information to sort these cases out.
- The itbl support does keep this information however, although
- we currently don't support itbl fprmats as part of the cop
- instruction. May want to add this support in the future. */
- }
- /* Never set the bit for $0, which is always zero. */
- mips_gprmask &= ~1 << 0;
+ case APPEND_ADD:
+ insert_into_history (0, 1, ip);
+ break;
+
+ case APPEND_ADD_WITH_NOP:
+ {
+ struct mips_cl_insn *nop;
+
+ insert_into_history (0, 1, ip);
+ nop = get_delay_slot_nop (ip);
+ add_fixed_insn (nop);
+ insert_into_history (0, 1, nop);
+ if (mips_relax.sequence)
+ mips_relax.sizes[mips_relax.sequence - 1] += insn_length (nop);
+ }
+ break;
+
+ case APPEND_ADD_COMPACT:
+ /* Convert MIPS16 jr/jalr into a "compact" jump. */
+ gas_assert (mips_opts.mips16);
+ ip->insn_opcode |= 0x0080;
+ find_altered_mips16_opcode (ip);
+ install_insn (ip);
+ insert_into_history (0, 1, ip);
+ break;
+
+ case APPEND_SWAP:
+ {
+ struct mips_cl_insn delay = history[0];
+ if (mips_opts.mips16)
+ {
+ know (delay.frag == ip->frag);
+ move_insn (ip, delay.frag, delay.where);
+ move_insn (&delay, ip->frag, ip->where + insn_length (ip));
+ }
+ else if (relaxed_branch || delay.frag != ip->frag)
+ {
+ /* Add the delay slot instruction to the end of the
+ current frag and shrink the fixed part of the
+ original frag. If the branch occupies the tail of
+ the latter, move it backwards to cover the gap. */
+ delay.frag->fr_fix -= branch_disp;
+ if (delay.frag == ip->frag)
+ move_insn (ip, ip->frag, ip->where - branch_disp);
+ add_fixed_insn (&delay);
+ }
+ else
+ {
+ move_insn (&delay, ip->frag,
+ ip->where - branch_disp + insn_length (ip));
+ move_insn (ip, history[0].frag, history[0].where);
+ }
+ history[0] = *ip;
+ delay.fixed_p = 1;
+ insert_into_history (0, 1, &delay);
+ }
+ break;
}
- else
+
+ /* If we have just completed an unconditional branch, clear the history. */
+ if ((delayed_branch_p (&history[1]) && uncond_branch_p (&history[1]))
+ || (compact_branch_p (&history[0]) && uncond_branch_p (&history[0])))
{
- if (pinfo & (MIPS16_INSN_WRITE_X | MIPS16_INSN_READ_X))
- mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (RX, *ip);
- if (pinfo & (MIPS16_INSN_WRITE_Y | MIPS16_INSN_READ_Y))
- mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (RY, *ip);
- if (pinfo & MIPS16_INSN_WRITE_Z)
- mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (RZ, *ip);
- if (pinfo & (MIPS16_INSN_WRITE_T | MIPS16_INSN_READ_T))
- mips_gprmask |= 1 << TREG;
- if (pinfo & (MIPS16_INSN_WRITE_SP | MIPS16_INSN_READ_SP))
- mips_gprmask |= 1 << SP;
- if (pinfo & (MIPS16_INSN_WRITE_31 | MIPS16_INSN_READ_31))
- mips_gprmask |= 1 << RA;
- if (pinfo & MIPS16_INSN_WRITE_GPR_Y)
- mips_gprmask |= 1 << MIPS16OP_EXTRACT_REG32R (ip->insn_opcode);
- if (pinfo & MIPS16_INSN_READ_Z)
- mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (MOVE32Z, *ip);
- if (pinfo & MIPS16_INSN_READ_GPR_X)
- mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (REGR32, *ip);
+ unsigned int i;
+
+ mips_no_prev_insn ();
+
+ for (i = 0; i < ARRAY_SIZE (history); i++)
+ history[i].cleared_p = 1;
}
- if (mips_relax.sequence != 2 && !mips_opts.noreorder)
+ /* We need to emit a label at the end of branch-likely macros. */
+ if (emit_branch_likely_macro)
{
- /* Filling the branch delay slot is more complex. We try to
- switch the branch with the previous instruction, which we can
- do if the previous instruction does not set up a condition
- that the branch tests and if the branch is not itself the
- target of any branch. */
- if ((pinfo & INSN_UNCOND_BRANCH_DELAY)
- || (pinfo & INSN_COND_BRANCH_DELAY))
- {
- if (mips_optimize < 2
- /* If we have seen .set volatile or .set nomove, don't
- optimize. */
- || mips_opts.nomove != 0
- /* We can't swap if the previous instruction's position
- is fixed. */
- || history[0].fixed_p
- /* If the previous previous insn was in a .set
- noreorder, we can't swap. Actually, the MIPS
- assembler will swap in this situation. However, gcc
- configured -with-gnu-as will generate code like
- .set noreorder
- lw $4,XXX
- .set reorder
- INSN
- bne $4,$0,foo
- in which we can not swap the bne and INSN. If gcc is
- not configured -with-gnu-as, it does not output the
- .set pseudo-ops. */
- || history[1].noreorder_p
- /* If the branch is itself the target of a branch, we
- can not swap. We cheat on this; all we check for is
- whether there is a label on this instruction. If
- there are any branches to anything other than a
- label, users must use .set noreorder. */
- || si->label_list != NULL
- /* If the previous instruction is in a variant frag
- other than this branch's one, we cannot do the swap.
- This does not apply to the mips16, which uses variant
- frags for different purposes. */
- || (! mips_opts.mips16
- && prev_insn_frag_type == rs_machine_dependent)
- /* Check for conflicts between the branch and the instructions
- before the candidate delay slot. */
- || nops_for_insn (0, history + 1, ip) > 0
- /* Check for conflicts between the swapped sequence and the
- target of the branch. */
- || nops_for_sequence (2, 0, history + 1, ip, history) > 0
- /* We do not swap with a trap instruction, since it
- complicates trap handlers to have the trap
- instruction be in a delay slot. */
- || (prev_pinfo & INSN_TRAP)
- /* If the branch reads a register that the previous
- instruction sets, we can not swap. */
- || (! mips_opts.mips16
- && (prev_pinfo & INSN_WRITE_GPR_T)
- && insn_uses_reg (ip, EXTRACT_OPERAND (RT, history[0]),
- MIPS_GR_REG))
- || (! mips_opts.mips16
- && (prev_pinfo & INSN_WRITE_GPR_D)
- && insn_uses_reg (ip, EXTRACT_OPERAND (RD, history[0]),
- MIPS_GR_REG))
- || (! mips_opts.mips16
- && (prev_pinfo2 & INSN2_WRITE_GPR_Z)
- && insn_uses_reg (ip, EXTRACT_OPERAND (RZ, history[0]),
- MIPS_GR_REG))
- || (mips_opts.mips16
- && (((prev_pinfo & MIPS16_INSN_WRITE_X)
- && (insn_uses_reg
- (ip, MIPS16_EXTRACT_OPERAND (RX, history[0]),
- MIPS16_REG)))
- || ((prev_pinfo & MIPS16_INSN_WRITE_Y)
- && (insn_uses_reg
- (ip, MIPS16_EXTRACT_OPERAND (RY, history[0]),
- MIPS16_REG)))
- || ((prev_pinfo & MIPS16_INSN_WRITE_Z)
- && (insn_uses_reg
- (ip, MIPS16_EXTRACT_OPERAND (RZ, history[0]),
- MIPS16_REG)))
- || ((prev_pinfo & MIPS16_INSN_WRITE_T)
- && insn_uses_reg (ip, TREG, MIPS_GR_REG))
- || ((prev_pinfo & MIPS16_INSN_WRITE_31)
- && insn_uses_reg (ip, RA, MIPS_GR_REG))
- || ((prev_pinfo & MIPS16_INSN_WRITE_GPR_Y)
- && insn_uses_reg (ip,
- MIPS16OP_EXTRACT_REG32R
- (history[0].insn_opcode),
- MIPS_GR_REG))))
- /* If the branch writes a register that the previous
- instruction sets, we can not swap (we know that
- branches write only to RD or to $31). */
- || (! mips_opts.mips16
- && (prev_pinfo & INSN_WRITE_GPR_T)
- && (((pinfo & INSN_WRITE_GPR_D)
- && (EXTRACT_OPERAND (RT, history[0])
- == EXTRACT_OPERAND (RD, *ip)))
- || ((pinfo & INSN_WRITE_GPR_31)
- && EXTRACT_OPERAND (RT, history[0]) == RA)))
- || (! mips_opts.mips16
- && (prev_pinfo & INSN_WRITE_GPR_D)
- && (((pinfo & INSN_WRITE_GPR_D)
- && (EXTRACT_OPERAND (RD, history[0])
- == EXTRACT_OPERAND (RD, *ip)))
- || ((pinfo & INSN_WRITE_GPR_31)
- && EXTRACT_OPERAND (RD, history[0]) == RA)))
- || (mips_opts.mips16
- && (pinfo & MIPS16_INSN_WRITE_31)
- && ((prev_pinfo & MIPS16_INSN_WRITE_31)
- || ((prev_pinfo & MIPS16_INSN_WRITE_GPR_Y)
- && (MIPS16OP_EXTRACT_REG32R (history[0].insn_opcode)
- == RA))))
- /* If the branch writes a register that the previous
- instruction reads, we can not swap (we know that
- branches only write to RD or to $31). */
- || (! mips_opts.mips16
- && (pinfo & INSN_WRITE_GPR_D)
- && insn_uses_reg (&history[0],
- EXTRACT_OPERAND (RD, *ip),
- MIPS_GR_REG))
- || (! mips_opts.mips16
- && (pinfo & INSN_WRITE_GPR_31)
- && insn_uses_reg (&history[0], RA, MIPS_GR_REG))
- || (mips_opts.mips16
- && (pinfo & MIPS16_INSN_WRITE_31)
- && insn_uses_reg (&history[0], RA, MIPS_GR_REG))
- /* If one instruction sets a condition code and the
- other one uses a condition code, we can not swap. */
- || ((pinfo & INSN_READ_COND_CODE)
- && (prev_pinfo & INSN_WRITE_COND_CODE))
- || ((pinfo & INSN_WRITE_COND_CODE)
- && (prev_pinfo & INSN_READ_COND_CODE))
- /* If the previous instruction uses the PC, we can not
- swap. */
- || (mips_opts.mips16
- && (prev_pinfo & MIPS16_INSN_READ_PC))
- /* If the previous instruction had a fixup in mips16
- mode, we can not swap. This normally means that the
- previous instruction was a 4 byte branch anyhow. */
- || (mips_opts.mips16 && history[0].fixp[0])
- /* If the previous instruction is a sync, sync.l, or
- sync.p, we can not swap. */
- || (prev_pinfo & INSN_SYNC)
- /* If the previous instruction is an ERET or
- DERET, avoid the swap. */
- || (history[0].insn_opcode == INSN_ERET)
- || (history[0].insn_opcode == INSN_DERET))
- {
- if (mips_opts.mips16
- && (pinfo & INSN_UNCOND_BRANCH_DELAY)
- && (pinfo & (MIPS16_INSN_READ_X | MIPS16_INSN_READ_31))
- && ISA_SUPPORTS_MIPS16E)
- {
- /* Convert MIPS16 jr/jalr into a "compact" jump. */
- ip->insn_opcode |= 0x0080;
- install_insn (ip);
- insert_into_history (0, 1, ip);
- }
- else
- {
- /* We could do even better for unconditional branches to
- portions of this object file; we could pick up the
- instruction at the destination, put it in the delay
- slot, and bump the destination address. */
- insert_into_history (0, 1, ip);
- emit_nop ();
- }
-
- if (mips_relax.sequence)
- mips_relax.sizes[mips_relax.sequence - 1] += 4;
- }
- else
- {
- /* It looks like we can actually do the swap. */
- struct mips_cl_insn delay = history[0];
- if (mips_opts.mips16)
- {
- know (delay.frag == ip->frag);
- move_insn (ip, delay.frag, delay.where);
- move_insn (&delay, ip->frag, ip->where + insn_length (ip));
- }
- else if (relaxed_branch)
- {
- /* Add the delay slot instruction to the end of the
- current frag and shrink the fixed part of the
- original frag. If the branch occupies the tail of
- the latter, move it backwards to cover the gap. */
- delay.frag->fr_fix -= 4;
- if (delay.frag == ip->frag)
- move_insn (ip, ip->frag, ip->where - 4);
- add_fixed_insn (&delay);
- }
- else
- {
- move_insn (&delay, ip->frag, ip->where);
- move_insn (ip, history[0].frag, history[0].where);
- }
- history[0] = *ip;
- delay.fixed_p = 1;
- insert_into_history (0, 1, &delay);
- }
-
- /* If that was an unconditional branch, forget the previous
- insn information. */
- if (pinfo & INSN_UNCOND_BRANCH_DELAY)
- {
- mips_no_prev_insn ();
- }
- }
- else if (pinfo & INSN_COND_BRANCH_LIKELY)
- {
- /* We don't yet optimize a branch likely. What we should do
- is look at the target, copy the instruction found there
- into the delay slot, and increment the branch to jump to
- the next instruction. */
- insert_into_history (0, 1, ip);
- emit_nop ();
- }
- else
- insert_into_history (0, 1, ip);
+ emit_branch_likely_macro = FALSE;
+ micromips_add_label ();
}
- else
- insert_into_history (0, 1, ip);
/* We just output an insn, so the next one doesn't have a label. */
mips_clear_insn_labels ();
}
-/* Forget that there was any previous instruction or label. */
+/* Forget that there was any previous instruction or label.
+ When BRANCH is true, the branch history is also flushed. */
static void
mips_no_prev_insn (void)
{
while (nops-- > 0)
add_fixed_insn (NOP_INSN);
- mips_move_labels ();
+ mips_move_text_labels ();
}
}
mips_no_prev_insn ();
{
/* Record the frag which holds the nop instructions, so
that we can remove them if we don't need them. */
- frag_grow (mips_opts.mips16 ? nops * 2 : nops * 4);
+ frag_grow (nops * NOP_INSN_SIZE);
prev_nop_frag = frag_now;
prev_nop_frag_holds = nops;
prev_nop_frag_required = 0;
decrease the size of prev_nop_frag. */
frag_wane (frag_now);
frag_new (0);
- mips_move_labels ();
+ mips_move_text_labels ();
}
- mips16_mark_labels ();
+ mips_mark_labels ();
mips_clear_insn_labels ();
}
mips_opts.noreorder++;
static void
end_noreorder (void)
{
-
mips_opts.noreorder--;
if (mips_opts.noreorder == 0 && prev_nop_frag != NULL)
{
/* Commit to inserting prev_nop_frag_required nops and go back to
handling nop insertion the .set reorder way. */
prev_nop_frag->fr_fix -= ((prev_nop_frag_holds - prev_nop_frag_required)
- * (mips_opts.mips16 ? 2 : 4));
+ * NOP_INSN_SIZE);
insert_into_history (prev_nop_frag_since,
prev_nop_frag_required, NOP_INSN);
prev_nop_frag = NULL;
macro_start (void)
{
memset (&mips_macro_warning.sizes, 0, sizeof (mips_macro_warning.sizes));
+ memset (&mips_macro_warning.first_insn_sizes, 0,
+ sizeof (mips_macro_warning.first_insn_sizes));
+ memset (&mips_macro_warning.insns, 0, sizeof (mips_macro_warning.insns));
mips_macro_warning.delay_slot_p = (mips_opts.noreorder
- && (history[0].insn_mo->pinfo
- & (INSN_UNCOND_BRANCH_DELAY
- | INSN_COND_BRANCH_DELAY
- | INSN_COND_BRANCH_LIKELY)) != 0);
+ && delayed_branch_p (&history[0]));
+ switch (history[0].insn_mo->pinfo2
+ & (INSN2_BRANCH_DELAY_32BIT | INSN2_BRANCH_DELAY_16BIT))
+ {
+ case INSN2_BRANCH_DELAY_32BIT:
+ mips_macro_warning.delay_slot_length = 4;
+ break;
+ case INSN2_BRANCH_DELAY_16BIT:
+ mips_macro_warning.delay_slot_length = 2;
+ break;
+ default:
+ mips_macro_warning.delay_slot_length = 0;
+ break;
+ }
+ mips_macro_warning.first_frag = NULL;
}
-/* Given that a macro is longer than 4 bytes, return the appropriate warning
- for it. Return null if no warning is needed. SUBTYPE is a bitmask of
- RELAX_DELAY_SLOT and RELAX_NOMACRO. */
+/* Given that a macro is longer than one instruction or of the wrong size,
+ return the appropriate warning for it. Return null if no warning is
+ needed. SUBTYPE is a bitmask of RELAX_DELAY_SLOT, RELAX_DELAY_SLOT_16BIT,
+ RELAX_DELAY_SLOT_SIZE_FIRST, RELAX_DELAY_SLOT_SIZE_SECOND,
+ and RELAX_NOMACRO. */
static const char *
macro_warning (relax_substateT subtype)
" in a branch delay slot");
else if (subtype & RELAX_NOMACRO)
return _("Macro instruction expanded into multiple instructions");
+ else if (subtype & (RELAX_DELAY_SLOT_SIZE_FIRST
+ | RELAX_DELAY_SLOT_SIZE_SECOND))
+ return ((subtype & RELAX_DELAY_SLOT_16BIT)
+ ? _("Macro instruction expanded into a wrong size instruction"
+ " in a 16-bit branch delay slot")
+ : _("Macro instruction expanded into a wrong size instruction"
+ " in a 32-bit branch delay slot"));
else
return 0;
}
static void
macro_end (void)
{
- if (mips_macro_warning.sizes[0] > 4 || mips_macro_warning.sizes[1] > 4)
+ /* Relaxation warning flags. */
+ relax_substateT subtype = 0;
+
+ /* Check delay slot size requirements. */
+ if (mips_macro_warning.delay_slot_length == 2)
+ subtype |= RELAX_DELAY_SLOT_16BIT;
+ if (mips_macro_warning.delay_slot_length != 0)
{
- relax_substateT subtype;
+ if (mips_macro_warning.delay_slot_length
+ != mips_macro_warning.first_insn_sizes[0])
+ subtype |= RELAX_DELAY_SLOT_SIZE_FIRST;
+ if (mips_macro_warning.delay_slot_length
+ != mips_macro_warning.first_insn_sizes[1])
+ subtype |= RELAX_DELAY_SLOT_SIZE_SECOND;
+ }
- /* Set up the relaxation warning flags. */
- subtype = 0;
- if (mips_macro_warning.sizes[1] > mips_macro_warning.sizes[0])
+ /* Check instruction count requirements. */
+ if (mips_macro_warning.insns[0] > 1 || mips_macro_warning.insns[1] > 1)
+ {
+ if (mips_macro_warning.insns[1] > mips_macro_warning.insns[0])
subtype |= RELAX_SECOND_LONGER;
if (mips_opts.warn_about_macros)
subtype |= RELAX_NOMACRO;
if (mips_macro_warning.delay_slot_p)
subtype |= RELAX_DELAY_SLOT;
+ }
- if (mips_macro_warning.sizes[0] > 4 && mips_macro_warning.sizes[1] > 4)
- {
- /* Either the macro has a single implementation or both
- implementations are longer than 4 bytes. Emit the
- warning now. */
- const char *msg = macro_warning (subtype);
- if (msg != 0)
- as_warn ("%s", msg);
- }
- else
- {
- /* One implementation might need a warning but the other
- definitely doesn't. */
- mips_macro_warning.first_frag->fr_subtype |= subtype;
- }
+ /* If both alternatives fail to fill a delay slot correctly,
+ emit the warning now. */
+ if ((subtype & RELAX_DELAY_SLOT_SIZE_FIRST) != 0
+ && (subtype & RELAX_DELAY_SLOT_SIZE_SECOND) != 0)
+ {
+ relax_substateT s;
+ const char *msg;
+
+ s = subtype & (RELAX_DELAY_SLOT_16BIT
+ | RELAX_DELAY_SLOT_SIZE_FIRST
+ | RELAX_DELAY_SLOT_SIZE_SECOND);
+ msg = macro_warning (s);
+ if (msg != NULL)
+ as_warn ("%s", msg);
+ subtype &= ~s;
+ }
+
+ /* If both implementations are longer than 1 instruction, then emit the
+ warning now. */
+ if (mips_macro_warning.insns[0] > 1 && mips_macro_warning.insns[1] > 1)
+ {
+ relax_substateT s;
+ const char *msg;
+
+ s = subtype & (RELAX_SECOND_LONGER | RELAX_NOMACRO | RELAX_DELAY_SLOT);
+ msg = macro_warning (s);
+ if (msg != NULL)
+ as_warn ("%s", msg);
+ subtype &= ~s;
}
+
+ /* If any flags still set, then one implementation might need a warning
+ and the other either will need one of a different kind or none at all.
+ Pass any remaining flags over to relaxation. */
+ if (mips_macro_warning.first_frag != NULL)
+ mips_macro_warning.first_frag->fr_subtype |= subtype;
}
+/* Instruction operand formats used in macros that vary between
+ standard MIPS and microMIPS code. */
+
+static const char * const brk_fmt[2] = { "c", "mF" };
+static const char * const cop12_fmt[2] = { "E,o(b)", "E,~(b)" };
+static const char * const jalr_fmt[2] = { "d,s", "t,s" };
+static const char * const lui_fmt[2] = { "t,u", "s,u" };
+static const char * const mem12_fmt[2] = { "t,o(b)", "t,~(b)" };
+static const char * const mfhl_fmt[2] = { "d", "mj" };
+static const char * const shft_fmt[2] = { "d,w,<", "t,r,<" };
+static const char * const trap_fmt[2] = { "s,t,q", "s,t,|" };
+
+#define BRK_FMT (brk_fmt[mips_opts.micromips])
+#define COP12_FMT (cop12_fmt[mips_opts.micromips])
+#define JALR_FMT (jalr_fmt[mips_opts.micromips])
+#define LUI_FMT (lui_fmt[mips_opts.micromips])
+#define MEM12_FMT (mem12_fmt[mips_opts.micromips])
+#define MFHL_FMT (mfhl_fmt[mips_opts.micromips])
+#define SHFT_FMT (shft_fmt[mips_opts.micromips])
+#define TRAP_FMT (trap_fmt[mips_opts.micromips])
+
/* Read a macro's relocation codes from *ARGS and store them in *R.
The first argument in *ARGS will be either the code for a single
relocation or -1 followed by the three codes that make up a
static void
macro_build (expressionS *ep, const char *name, const char *fmt, ...)
{
- const struct mips_opcode *mo;
- struct mips_cl_insn insn;
+ const struct mips_opcode *mo = NULL;
bfd_reloc_code_real_type r[3];
+ const struct mips_opcode *amo;
+ struct hash_control *hash;
+ struct mips_cl_insn insn;
va_list args;
va_start (args, fmt);
r[0] = BFD_RELOC_UNUSED;
r[1] = BFD_RELOC_UNUSED;
r[2] = BFD_RELOC_UNUSED;
- mo = (struct mips_opcode *) hash_find (op_hash, name);
- gas_assert (mo);
- gas_assert (strcmp (name, mo->name) == 0);
+ hash = mips_opts.micromips ? micromips_op_hash : op_hash;
+ amo = (struct mips_opcode *) hash_find (hash, name);
+ gas_assert (amo);
+ gas_assert (strcmp (name, amo->name) == 0);
- while (1)
+ do
{
/* Search until we get a match for NAME. It is assumed here that
- macros will never generate MDMX, MIPS-3D, or MT instructions. */
- if (strcmp (fmt, mo->args) == 0
- && mo->pinfo != INSN_MACRO
- && is_opcode_valid (mo))
- break;
+ macros will never generate MDMX, MIPS-3D, or MT instructions.
+ We try to match an instruction that fulfils the branch delay
+ slot instruction length requirement (if any) of the previous
+ instruction. While doing this we record the first instruction
+ seen that matches all the other conditions and use it anyway
+ if the requirement cannot be met; we will issue an appropriate
+ warning later on. */
+ if (strcmp (fmt, amo->args) == 0
+ && amo->pinfo != INSN_MACRO
+ && is_opcode_valid (amo)
+ && is_size_valid (amo))
+ {
+ if (is_delay_slot_valid (amo))
+ {
+ mo = amo;
+ break;
+ }
+ else if (!mo)
+ mo = amo;
+ }
- ++mo;
- gas_assert (mo->name);
- gas_assert (strcmp (name, mo->name) == 0);
+ ++amo;
+ gas_assert (amo->name);
}
+ while (strcmp (name, amo->name) == 0);
+ gas_assert (mo);
create_insn (&insn, mo);
for (;;)
{
{
case 'A':
case 'E':
- INSERT_OPERAND (SHAMT, insn, va_arg (args, int));
+ INSERT_OPERAND (mips_opts.micromips,
+ EXTLSB, insn, va_arg (args, int));
continue;
case 'B':
in MSB form. (When handling the instruction in the
non-macro case, these arguments are sizes from which
MSB values must be calculated.) */
- INSERT_OPERAND (INSMSB, insn, va_arg (args, int));
+ INSERT_OPERAND (mips_opts.micromips,
+ INSMSB, insn, va_arg (args, int));
+ continue;
+
+ case 'J':
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, CODE10, insn, va_arg (args, int));
continue;
case 'C':
in MSBD form. (When handling the instruction in the
non-macro case, these arguments are sizes from which
MSBD values must be calculated.) */
- INSERT_OPERAND (EXTMSBD, insn, va_arg (args, int));
+ INSERT_OPERAND (mips_opts.micromips,
+ EXTMSBD, insn, va_arg (args, int));
continue;
case 'Q':
- INSERT_OPERAND (SEQI, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, SEQI, insn, va_arg (args, int));
+ continue;
+
+ case 'j':
+ INSERT_OPERAND (mips_opts.micromips, EVAOFFSET, insn, va_arg (args, int));
continue;
default:
- internalError ();
+ abort ();
}
continue;
case '2':
- INSERT_OPERAND (BP, insn, va_arg (args, int));
+ INSERT_OPERAND (mips_opts.micromips, BP, insn, va_arg (args, int));
continue;
+ case 'n':
+ gas_assert (mips_opts.micromips);
case 't':
case 'w':
case 'E':
- INSERT_OPERAND (RT, insn, va_arg (args, int));
+ INSERT_OPERAND (mips_opts.micromips, RT, insn, va_arg (args, int));
continue;
case 'c':
- INSERT_OPERAND (CODE, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, CODE, insn, va_arg (args, int));
continue;
- case 'T':
case 'W':
- INSERT_OPERAND (FT, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ case 'T':
+ INSERT_OPERAND (mips_opts.micromips, FT, insn, va_arg (args, int));
continue;
- case 'd':
case 'G':
+ if (mips_opts.micromips)
+ INSERT_OPERAND (1, RS, insn, va_arg (args, int));
+ else
+ INSERT_OPERAND (0, RD, insn, va_arg (args, int));
+ continue;
+
case 'K':
- INSERT_OPERAND (RD, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ case 'd':
+ INSERT_OPERAND (mips_opts.micromips, RD, insn, va_arg (args, int));
continue;
case 'U':
+ gas_assert (!mips_opts.micromips);
{
int tmp = va_arg (args, int);
- INSERT_OPERAND (RT, insn, tmp);
- INSERT_OPERAND (RD, insn, tmp);
- continue;
+ INSERT_OPERAND (0, RT, insn, tmp);
+ INSERT_OPERAND (0, RD, insn, tmp);
}
+ continue;
case 'V':
case 'S':
- INSERT_OPERAND (FS, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, FS, insn, va_arg (args, int));
continue;
case 'z':
continue;
case '<':
- INSERT_OPERAND (SHAMT, insn, va_arg (args, int));
+ INSERT_OPERAND (mips_opts.micromips,
+ SHAMT, insn, va_arg (args, int));
continue;
case 'D':
- INSERT_OPERAND (FD, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, FD, insn, va_arg (args, int));
continue;
case 'B':
- INSERT_OPERAND (CODE20, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, CODE20, insn, va_arg (args, int));
continue;
case 'J':
- INSERT_OPERAND (CODE19, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, CODE19, insn, va_arg (args, int));
continue;
case 'q':
- INSERT_OPERAND (CODE2, insn, va_arg (args, int));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, CODE2, insn, va_arg (args, int));
continue;
case 'b':
case 's':
case 'r':
case 'v':
- INSERT_OPERAND (RS, insn, va_arg (args, int));
+ INSERT_OPERAND (mips_opts.micromips, RS, insn, va_arg (args, int));
continue;
case 'i':
*/
if (ep->X_op == O_constant)
{
+ /* For microMIPS we always use relocations for branches.
+ So we should not resolve immediate values. */
+ gas_assert (!mips_opts.micromips);
+
if ((ep->X_add_number & 3) != 0)
as_bad (_("branch to misaligned address (0x%lx)"),
(unsigned long) ep->X_add_number);
continue;
case 'C':
- INSERT_OPERAND (COPZ, insn, va_arg (args, unsigned long));
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, COPZ, insn, va_arg (args, unsigned long));
continue;
case 'k':
- INSERT_OPERAND (CACHE, insn, va_arg (args, unsigned long));
+ INSERT_OPERAND (mips_opts.micromips,
+ CACHE, insn, va_arg (args, unsigned long));
+ continue;
+
+ case '|':
+ gas_assert (mips_opts.micromips);
+ INSERT_OPERAND (1, TRAP, insn, va_arg (args, int));
+ continue;
+
+ case '.':
+ gas_assert (mips_opts.micromips);
+ INSERT_OPERAND (1, OFFSET10, insn, va_arg (args, int));
+ continue;
+
+ case '\\':
+ INSERT_OPERAND (mips_opts.micromips,
+ 3BITPOS, insn, va_arg (args, unsigned int));
+ continue;
+
+ case '~':
+ INSERT_OPERAND (mips_opts.micromips,
+ OFFSET12, insn, va_arg (args, unsigned long));
+ continue;
+
+ case 'N':
+ gas_assert (mips_opts.micromips);
+ INSERT_OPERAND (1, BCC, insn, va_arg (args, int));
+ continue;
+
+ case 'm': /* Opcode extension character. */
+ gas_assert (mips_opts.micromips);
+ switch (*fmt++)
+ {
+ case 'j':
+ INSERT_OPERAND (1, MJ, insn, va_arg (args, int));
+ break;
+
+ case 'p':
+ INSERT_OPERAND (1, MP, insn, va_arg (args, int));
+ break;
+
+ case 'F':
+ INSERT_OPERAND (1, IMMF, insn, va_arg (args, int));
+ break;
+
+ default:
+ abort ();
+ }
continue;
default:
- internalError ();
+ abort ();
}
break;
}
va_end (args);
gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
- append_insn (&insn, ep, r);
+ append_insn (&insn, ep, r, TRUE);
}
static void
case 'p':
case 'q':
{
+ offsetT value;
+
gas_assert (ep != NULL);
if (ep->X_op != O_constant)
*r = (int) BFD_RELOC_UNUSED + c;
- else
+ else if (calculate_reloc (*r, ep->X_add_number, &value))
{
- mips16_immed (NULL, 0, c, ep->X_add_number, FALSE, FALSE,
- FALSE, &insn.insn_opcode, &insn.use_extend,
- &insn.extend);
+ mips16_immed (NULL, 0, c, *r, value, 0, &insn.insn_opcode);
ep = NULL;
*r = BFD_RELOC_UNUSED;
}
gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
- append_insn (&insn, ep, r);
+ append_insn (&insn, ep, r, TRUE);
}
/*
* function. This occurs in NewABI PIC code.
*/
static void
-macro_build_jalr (expressionS *ep)
+macro_build_jalr (expressionS *ep, int cprestore)
{
+ static const bfd_reloc_code_real_type jalr_relocs[2]
+ = { BFD_RELOC_MIPS_JALR, BFD_RELOC_MICROMIPS_JALR };
+ bfd_reloc_code_real_type jalr_reloc = jalr_relocs[mips_opts.micromips];
+ const char *jalr;
char *f = NULL;
if (MIPS_JALR_HINT_P (ep))
frag_grow (8);
f = frag_more (0);
}
- macro_build (NULL, "jalr", "d,s", RA, PIC_CALL_REG);
+ if (mips_opts.micromips)
+ {
+ jalr = mips_opts.noreorder && !cprestore ? "jalr" : "jalrs";
+ if (MIPS_JALR_HINT_P (ep)
+ || (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, jalr, "t,s", RA, PIC_CALL_REG);
+ else
+ macro_build (NULL, jalr, "mj", PIC_CALL_REG);
+ }
+ else
+ macro_build (NULL, "jalr", "d,s", RA, PIC_CALL_REG);
if (MIPS_JALR_HINT_P (ep))
- fix_new_exp (frag_now, f - frag_now->fr_literal,
- 4, ep, FALSE, BFD_RELOC_MIPS_JALR);
+ fix_new_exp (frag_now, f - frag_now->fr_literal, 4, ep, FALSE, jalr_reloc);
}
/*
static void
macro_build_lui (expressionS *ep, int regnum)
{
- expressionS high_expr;
- const struct mips_opcode *mo;
- struct mips_cl_insn insn;
- bfd_reloc_code_real_type r[3]
- = {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
- const char *name = "lui";
- const char *fmt = "t,u";
-
gas_assert (! mips_opts.mips16);
- high_expr = *ep;
-
- if (high_expr.X_op == O_constant)
- {
- /* We can compute the instruction now without a relocation entry. */
- high_expr.X_add_number = ((high_expr.X_add_number + 0x8000)
- >> 16) & 0xffff;
- *r = BFD_RELOC_UNUSED;
- }
- else
+ if (ep->X_op != O_constant)
{
gas_assert (ep->X_op == O_symbol);
/* _gp_disp is a special case, used from s_cpload.
|| (! mips_in_shared
&& strcmp (S_GET_NAME (ep->X_add_symbol),
"__gnu_local_gp") == 0));
- *r = BFD_RELOC_HI16_S;
}
- mo = hash_find (op_hash, name);
- gas_assert (strcmp (name, mo->name) == 0);
- gas_assert (strcmp (fmt, mo->args) == 0);
- create_insn (&insn, mo);
-
- insn.insn_opcode = insn.insn_mo->match;
- INSERT_OPERAND (RT, insn, regnum);
- if (*r == BFD_RELOC_UNUSED)
- {
- insn.insn_opcode |= high_expr.X_add_number;
- append_insn (&insn, NULL, r);
- }
- else
- append_insn (&insn, &high_expr, r);
+ macro_build (ep, "lui", LUI_FMT, regnum, BFD_RELOC_HI16_S);
}
/* Generate a sequence of instructions to do a load or store from a constant
else if ((IS_SEXT_32BIT_NUM (ep->X_add_number)))
{
/* 32 bit values require an lui. */
- macro_build (ep, "lui", "t,u", reg, BFD_RELOC_HI16);
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
if ((ep->X_add_number & 0xffff) != 0)
macro_build (ep, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16);
return;
}
if (lo32.X_add_number & 0x80000000)
{
- macro_build (&lo32, "lui", "t,u", reg, BFD_RELOC_HI16);
+ macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
if (lo32.X_add_number & 0xffff)
macro_build (&lo32, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16);
return;
else
tmp.X_add_number = hi32.X_add_number >> (shift - 32);
macro_build (&tmp, "ori", "t,r,i", reg, 0, BFD_RELOC_LO16);
- macro_build (NULL, (shift >= 32) ? "dsll32" : "dsll", "d,w,<",
+ macro_build (NULL, (shift >= 32) ? "dsll32" : "dsll", SHFT_FMT,
reg, reg, (shift >= 32) ? shift - 32 : shift);
return;
}
if (bit != 0)
{
bit += shift;
- macro_build (NULL, (bit >= 32) ? "dsll32" : "dsll", "d,w,<",
+ macro_build (NULL, (bit >= 32) ? "dsll32" : "dsll", SHFT_FMT,
reg, reg, (bit >= 32) ? bit - 32 : bit);
}
- macro_build (NULL, (shift >= 32) ? "dsrl32" : "dsrl", "d,w,<",
+ macro_build (NULL, (shift >= 32) ? "dsrl32" : "dsrl", SHFT_FMT,
reg, reg, (shift >= 32) ? shift - 32 : shift);
return;
}
{
if (freg != 0)
{
- macro_build (NULL, "dsll32", "d,w,<", reg, freg, 0);
+ macro_build (NULL, "dsll32", SHFT_FMT, reg, freg, 0);
freg = reg;
}
}
if ((freg == 0) && (lo32.X_add_number == (offsetT) 0xffffffff))
{
- macro_build (&lo32, "lui", "t,u", reg, BFD_RELOC_HI16);
- macro_build (NULL, "dsrl32", "d,w,<", reg, reg, 0);
+ macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16);
+ macro_build (NULL, "dsrl32", SHFT_FMT, reg, reg, 0);
return;
}
if (freg != 0)
{
- macro_build (NULL, "dsll", "d,w,<", reg, freg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, reg, freg, 16);
freg = reg;
}
mid16 = lo32;
mid16.X_add_number >>= 16;
macro_build (&mid16, "ori", "t,r,i", reg, freg, BFD_RELOC_LO16);
- macro_build (NULL, "dsll", "d,w,<", reg, reg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
freg = reg;
}
if ((lo32.X_add_number & 0xffff) != 0)
if (*used_at == 0 && mips_opts.at)
{
- macro_build (ep, "lui", "t,u", reg, BFD_RELOC_MIPS_HIGHEST);
- macro_build (ep, "lui", "t,u", AT, BFD_RELOC_HI16_S);
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST);
+ macro_build (ep, "lui", LUI_FMT, AT, BFD_RELOC_HI16_S);
macro_build (ep, "daddiu", "t,r,j", reg, reg,
BFD_RELOC_MIPS_HIGHER);
macro_build (ep, "daddiu", "t,r,j", AT, AT, BFD_RELOC_LO16);
- macro_build (NULL, "dsll32", "d,w,<", reg, reg, 0);
+ macro_build (NULL, "dsll32", SHFT_FMT, reg, reg, 0);
macro_build (NULL, "daddu", "d,v,t", reg, reg, AT);
*used_at = 1;
}
else
{
- macro_build (ep, "lui", "t,u", reg, BFD_RELOC_MIPS_HIGHEST);
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST);
macro_build (ep, "daddiu", "t,r,j", reg, reg,
BFD_RELOC_MIPS_HIGHER);
- macro_build (NULL, "dsll", "d,w,<", reg, reg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_HI16_S);
- macro_build (NULL, "dsll", "d,w,<", reg, reg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16);
macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_LO16);
}
ex.X_add_number = ep->X_add_number;
ep->X_add_number = 0;
relax_start (ep->X_add_symbol);
- macro_build (ep, "lui", "t,u", reg, BFD_RELOC_MIPS_GOT_HI16);
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
reg, reg, mips_gp_register);
macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)",
ex.X_add_number = ep->X_add_number;
ep->X_add_number = 0;
relax_start (ep->X_add_symbol);
- macro_build (ep, "lui", "t,u", reg, BFD_RELOC_MIPS_GOT_HI16);
+ macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
reg, reg, mips_gp_register);
macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)",
static void
move_register (int dest, int source)
{
- macro_build (NULL, HAVE_32BIT_GPRS ? "addu" : "daddu", "d,v,t",
- dest, source, 0);
+ /* Prefer to use a 16-bit microMIPS instruction unless the previous
+ instruction specifically requires a 32-bit one. */
+ if (mips_opts.micromips
+ && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, "move", "mp,mj", dest, source);
+ else
+ macro_build (NULL, HAVE_32BIT_GPRS ? "addu" : "daddu", "d,v,t",
+ dest, source, 0);
}
/* Emit an SVR4 PIC sequence to load address LOCAL into DEST, where
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dest, dest, tmp);
}
+/* Emit a sequence of instructions to emulate a branch likely operation.
+ BR is an ordinary branch corresponding to one to be emulated. BRNEG
+ is its complementing branch with the original condition negated.
+ CALL is set if the original branch specified the link operation.
+ EP, FMT, SREG and TREG specify the usual macro_build() parameters.
+
+ Code like this is produced in the noreorder mode:
+
+ BRNEG <args>, 1f
+ nop
+ b <sym>
+ delay slot (executed only if branch taken)
+ 1:
+
+ or, if CALL is set:
+
+ BRNEG <args>, 1f
+ nop
+ bal <sym>
+ delay slot (executed only if branch taken)
+ 1:
+
+ In the reorder mode the delay slot would be filled with a nop anyway,
+ so code produced is simply:
+
+ BR <args>, <sym>
+ nop
+
+ This function is used when producing code for the microMIPS ASE that
+ does not implement branch likely instructions in hardware. */
+
+static void
+macro_build_branch_likely (const char *br, const char *brneg,
+ int call, expressionS *ep, const char *fmt,
+ unsigned int sreg, unsigned int treg)
+{
+ int noreorder = mips_opts.noreorder;
+ expressionS expr1;
+
+ gas_assert (mips_opts.micromips);
+ start_noreorder ();
+ if (noreorder)
+ {
+ micromips_label_expr (&expr1);
+ macro_build (&expr1, brneg, fmt, sreg, treg);
+ macro_build (NULL, "nop", "");
+ macro_build (ep, call ? "bal" : "b", "p");
+
+ /* Set to true so that append_insn adds a label. */
+ emit_branch_likely_macro = TRUE;
+ }
+ else
+ {
+ macro_build (ep, br, fmt, sreg, treg);
+ macro_build (NULL, "nop", "");
+ }
+ end_noreorder ();
+}
+
+/* Emit a coprocessor branch-likely macro specified by TYPE, using CC as
+ the condition code tested. EP specifies the branch target. */
+
+static void
+macro_build_branch_ccl (int type, expressionS *ep, unsigned int cc)
+{
+ const int call = 0;
+ const char *brneg;
+ const char *br;
+
+ switch (type)
+ {
+ case M_BC1FL:
+ br = "bc1f";
+ brneg = "bc1t";
+ break;
+ case M_BC1TL:
+ br = "bc1t";
+ brneg = "bc1f";
+ break;
+ case M_BC2FL:
+ br = "bc2f";
+ brneg = "bc2t";
+ break;
+ case M_BC2TL:
+ br = "bc2t";
+ brneg = "bc2f";
+ break;
+ default:
+ abort ();
+ }
+ macro_build_branch_likely (br, brneg, call, ep, "N,p", cc, ZERO);
+}
+
+/* Emit a two-argument branch macro specified by TYPE, using SREG as
+ the register tested. EP specifies the branch target. */
+
+static void
+macro_build_branch_rs (int type, expressionS *ep, unsigned int sreg)
+{
+ const char *brneg = NULL;
+ const char *br;
+ int call = 0;
+
+ switch (type)
+ {
+ case M_BGEZ:
+ br = "bgez";
+ break;
+ case M_BGEZL:
+ br = mips_opts.micromips ? "bgez" : "bgezl";
+ brneg = "bltz";
+ break;
+ case M_BGEZALL:
+ gas_assert (mips_opts.micromips);
+ br = "bgezals";
+ brneg = "bltz";
+ call = 1;
+ break;
+ case M_BGTZ:
+ br = "bgtz";
+ break;
+ case M_BGTZL:
+ br = mips_opts.micromips ? "bgtz" : "bgtzl";
+ brneg = "blez";
+ break;
+ case M_BLEZ:
+ br = "blez";
+ break;
+ case M_BLEZL:
+ br = mips_opts.micromips ? "blez" : "blezl";
+ brneg = "bgtz";
+ break;
+ case M_BLTZ:
+ br = "bltz";
+ break;
+ case M_BLTZL:
+ br = mips_opts.micromips ? "bltz" : "bltzl";
+ brneg = "bgez";
+ break;
+ case M_BLTZALL:
+ gas_assert (mips_opts.micromips);
+ br = "bltzals";
+ brneg = "bgez";
+ call = 1;
+ break;
+ default:
+ abort ();
+ }
+ if (mips_opts.micromips && brneg)
+ macro_build_branch_likely (br, brneg, call, ep, "s,p", sreg, ZERO);
+ else
+ macro_build (ep, br, "s,p", sreg);
+}
+
+/* Emit a three-argument branch macro specified by TYPE, using SREG and
+ TREG as the registers tested. EP specifies the branch target. */
+
+static void
+macro_build_branch_rsrt (int type, expressionS *ep,
+ unsigned int sreg, unsigned int treg)
+{
+ const char *brneg = NULL;
+ const int call = 0;
+ const char *br;
+
+ switch (type)
+ {
+ case M_BEQ:
+ case M_BEQ_I:
+ br = "beq";
+ break;
+ case M_BEQL:
+ case M_BEQL_I:
+ br = mips_opts.micromips ? "beq" : "beql";
+ brneg = "bne";
+ break;
+ case M_BNE:
+ case M_BNE_I:
+ br = "bne";
+ break;
+ case M_BNEL:
+ case M_BNEL_I:
+ br = mips_opts.micromips ? "bne" : "bnel";
+ brneg = "beq";
+ break;
+ default:
+ abort ();
+ }
+ if (mips_opts.micromips && brneg)
+ macro_build_branch_likely (br, brneg, call, ep, "s,t,p", sreg, treg);
+ else
+ macro_build (ep, br, "s,t,p", sreg, treg);
+}
+
/*
* Build macros
* This routine implements the seemingly endless macro or synthesized
unsigned int tempreg;
int mask;
int used_at = 0;
+ expressionS label_expr;
expressionS expr1;
+ expressionS *ep;
const char *s;
const char *s2;
const char *fmt;
int likely = 0;
- int dbl = 0;
int coproc = 0;
- int lr = 0;
- int imm = 0;
+ int offbits = 16;
int call = 0;
+ int jals = 0;
+ int dbl = 0;
+ int imm = 0;
+ int ust = 0;
+ int lp = 0;
+ int ab = 0;
int off;
offsetT maxnum;
bfd_reloc_code_real_type r;
gas_assert (! mips_opts.mips16);
- treg = EXTRACT_OPERAND (RT, *ip);
- dreg = EXTRACT_OPERAND (RD, *ip);
- sreg = breg = EXTRACT_OPERAND (RS, *ip);
+ treg = EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
+ dreg = EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
+ sreg = breg = EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
mask = ip->insn_mo->mask;
+ label_expr.X_op = O_constant;
+ label_expr.X_op_symbol = NULL;
+ label_expr.X_add_symbol = NULL;
+ label_expr.X_add_number = 0;
+
expr1.X_op = O_constant;
expr1.X_op_symbol = NULL;
expr1.X_add_symbol = NULL;
case M_DABS:
dbl = 1;
case M_ABS:
- /* bgez $a0,.+12
- move v0,$a0
- sub v0,$zero,$a0
- */
+ /* bgez $a0,1f
+ move v0,$a0
+ sub v0,$zero,$a0
+ 1:
+ */
start_noreorder ();
- expr1.X_add_number = 8;
- macro_build (&expr1, "bgez", "s,p", sreg);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "bgez", "s,p", sreg);
if (dreg == sreg)
macro_build (NULL, "nop", "");
else
move_register (dreg, sreg);
macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", dreg, 0, sreg);
+ if (mips_opts.micromips)
+ micromips_add_label ();
end_noreorder ();
break;
dbl = 1;
s = "daddi";
s2 = "dadd";
- goto do_addi;
+ if (!mips_opts.micromips)
+ goto do_addi;
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x200
+ && imm_expr.X_add_number < 0x200)
+ {
+ macro_build (NULL, s, "t,r,.", treg, sreg, imm_expr.X_add_number);
+ break;
+ }
+ goto do_addi_i;
case M_DADDU_I:
dbl = 1;
s = "daddiu";
macro_build (&imm_expr, s, "t,r,j", treg, sreg, BFD_RELOC_LO16);
break;
}
+ do_addi_i:
used_at = 1;
load_register (AT, &imm_expr, dbl);
macro_build (NULL, s2, "d,v,t", treg, sreg, AT);
case 2:
macro_build (NULL, "packrl.ph", "d,s,t", treg, treg, sreg);
break;
- default:
+ case 1:
+ case 3:
macro_build (NULL, "balign", "t,s,2", treg, sreg,
(int) imm_expr.X_add_number);
break;
+ default:
+ as_bad (_("BALIGN immediate not 0, 1, 2 or 3 (%lu)"),
+ (unsigned long) imm_expr.X_add_number);
+ break;
}
break;
+ case M_BC1FL:
+ case M_BC1TL:
+ case M_BC2FL:
+ case M_BC2TL:
+ gas_assert (mips_opts.micromips);
+ macro_build_branch_ccl (mask, &offset_expr,
+ EXTRACT_OPERAND (1, BCC, *ip));
+ break;
+
case M_BEQ_I:
- s = "beq";
- goto beq_i;
case M_BEQL_I:
- s = "beql";
- likely = 1;
- goto beq_i;
case M_BNE_I:
- s = "bne";
- goto beq_i;
case M_BNEL_I:
- s = "bnel";
- likely = 1;
- beq_i:
if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ treg = 0;
+ else
{
- macro_build (&offset_expr, s, "s,t,p", sreg, ZERO);
- break;
+ treg = AT;
+ used_at = 1;
+ load_register (treg, &imm_expr, HAVE_64BIT_GPRS);
}
- used_at = 1;
- load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (&offset_expr, s, "s,t,p", sreg, AT);
+ /* Fall through. */
+ case M_BEQL:
+ case M_BNEL:
+ macro_build_branch_rsrt (mask, &offset_expr, sreg, treg);
break;
case M_BGEL:
likely = 1;
case M_BGE:
if (treg == 0)
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, sreg);
+ else if (sreg == 0)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, treg);
+ else
{
- macro_build (&offset_expr, likely ? "bgezl" : "bgez", "s,p", sreg);
- break;
- }
- if (sreg == 0)
- {
- macro_build (&offset_expr, likely ? "blezl" : "blez", "s,p", treg);
- break;
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
- macro_build (&offset_expr, likely ? "beql" : "beq", "s,t,p", AT, ZERO);
+ break;
+
+ case M_BGEZL:
+ case M_BGEZALL:
+ case M_BGTZL:
+ case M_BLEZL:
+ case M_BLTZL:
+ case M_BLTZALL:
+ macro_build_branch_rs (mask, &offset_expr, sreg);
break;
case M_BGTL_I:
if (! likely)
macro_build (NULL, "nop", "");
else
- macro_build (&offset_expr, "bnel", "s,t,p", ZERO, ZERO);
+ macro_build_branch_rsrt (M_BNEL, &offset_expr, ZERO, ZERO);
break;
}
if (imm_expr.X_op != O_constant)
likely = 1;
if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
- macro_build (&offset_expr, likely ? "bgezl" : "bgez", "s,p", sreg);
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ,
+ &offset_expr, sreg);
break;
}
if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
- macro_build (&offset_expr, likely ? "bgtzl" : "bgtz", "s,p", sreg);
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ,
+ &offset_expr, sreg);
break;
}
maxnum = 0x7fffffff;
}
used_at = 1;
set_at (sreg, 0);
- macro_build (&offset_expr, likely ? "beql" : "beq", "s,t,p", AT, ZERO);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
break;
case M_BGEUL:
case M_BGEU:
if (treg == 0)
goto do_true;
- if (sreg == 0)
+ else if (sreg == 0)
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, ZERO, treg);
+ else
{
- macro_build (&offset_expr, likely ? "beql" : "beq",
- "s,t,p", ZERO, treg);
- break;
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
- macro_build (&offset_expr, likely ? "beql" : "beq", "s,t,p", AT, ZERO);
break;
case M_BGTUL_I:
likely = 1;
if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
goto do_true;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, sreg, ZERO);
+ else
{
- macro_build (&offset_expr, likely ? "bnel" : "bne",
- "s,t,p", sreg, ZERO);
- break;
+ used_at = 1;
+ set_at (sreg, 1);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- set_at (sreg, 1);
- macro_build (&offset_expr, likely ? "beql" : "beq", "s,t,p", AT, ZERO);
break;
case M_BGTL:
likely = 1;
case M_BGT:
if (treg == 0)
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, sreg);
+ else if (sreg == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, treg);
+ else
{
- macro_build (&offset_expr, likely ? "bgtzl" : "bgtz", "s,p", sreg);
- break;
- }
- if (sreg == 0)
- {
- macro_build (&offset_expr, likely ? "bltzl" : "bltz", "s,p", treg);
- break;
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
- macro_build (&offset_expr, likely ? "bnel" : "bne", "s,t,p", AT, ZERO);
break;
case M_BGTUL:
likely = 1;
case M_BGTU:
if (treg == 0)
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, sreg, ZERO);
+ else if (sreg == 0)
+ goto do_false;
+ else
{
- macro_build (&offset_expr, likely ? "bnel" : "bne",
- "s,t,p", sreg, ZERO);
- break;
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
}
- if (sreg == 0)
- goto do_false;
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
- macro_build (&offset_expr, likely ? "bnel" : "bne", "s,t,p", AT, ZERO);
break;
case M_BLEL:
likely = 1;
case M_BLE:
if (treg == 0)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, sreg);
+ else if (sreg == 0)
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, treg);
+ else
{
- macro_build (&offset_expr, likely ? "blezl" : "blez", "s,p", sreg);
- break;
- }
- if (sreg == 0)
- {
- macro_build (&offset_expr, likely ? "bgezl" : "bgez", "s,p", treg);
- break;
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
- macro_build (&offset_expr, likely ? "beql" : "beq", "s,t,p", AT, ZERO);
break;
case M_BLEL_I:
if (mask == M_BLTL_I)
likely = 1;
if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, sreg);
+ else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, sreg);
+ else
{
- macro_build (&offset_expr, likely ? "bltzl" : "bltz", "s,p", sreg);
- break;
- }
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
- {
- macro_build (&offset_expr, likely ? "blezl" : "blez", "s,p", sreg);
- break;
+ used_at = 1;
+ set_at (sreg, 0);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- set_at (sreg, 0);
- macro_build (&offset_expr, likely ? "bnel" : "bne", "s,t,p", AT, ZERO);
break;
case M_BLEUL:
likely = 1;
case M_BLEU:
if (treg == 0)
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, sreg, ZERO);
+ else if (sreg == 0)
+ goto do_true;
+ else
{
- macro_build (&offset_expr, likely ? "beql" : "beq",
- "s,t,p", sreg, ZERO);
- break;
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, AT, ZERO);
}
- if (sreg == 0)
- goto do_true;
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
- macro_build (&offset_expr, likely ? "beql" : "beq", "s,t,p", AT, ZERO);
break;
case M_BLEUL_I:
likely = 1;
if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
goto do_false;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
+ &offset_expr, sreg, ZERO);
+ else
{
- macro_build (&offset_expr, likely ? "beql" : "beq",
- "s,t,p", sreg, ZERO);
- break;
+ used_at = 1;
+ set_at (sreg, 1);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- set_at (sreg, 1);
- macro_build (&offset_expr, likely ? "bnel" : "bne", "s,t,p", AT, ZERO);
break;
case M_BLTL:
likely = 1;
case M_BLT:
if (treg == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, sreg);
+ else if (sreg == 0)
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, treg);
+ else
{
- macro_build (&offset_expr, likely ? "bltzl" : "bltz", "s,p", sreg);
- break;
- }
- if (sreg == 0)
- {
- macro_build (&offset_expr, likely ? "bgtzl" : "bgtz", "s,p", treg);
- break;
+ used_at = 1;
+ macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
- macro_build (&offset_expr, likely ? "bnel" : "bne", "s,t,p", AT, ZERO);
break;
case M_BLTUL:
case M_BLTU:
if (treg == 0)
goto do_false;
- if (sreg == 0)
+ else if (sreg == 0)
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, ZERO, treg);
+ else
{
- macro_build (&offset_expr, likely ? "bnel" : "bne",
- "s,t,p", ZERO, treg);
- break;
+ used_at = 1;
+ macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
+ macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
+ &offset_expr, AT, ZERO);
}
- used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
- macro_build (&offset_expr, likely ? "bnel" : "bne", "s,t,p", AT, ZERO);
break;
case M_DEXT:
{
as_warn (_("Divide by zero."));
if (mips_trap)
- macro_build (NULL, "teq", "s,t,q", ZERO, ZERO, 7);
+ macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
else
- macro_build (NULL, "break", "c", 7);
+ macro_build (NULL, "break", BRK_FMT, 7);
break;
}
start_noreorder ();
if (mips_trap)
{
- macro_build (NULL, "teq", "s,t,q", treg, ZERO, 7);
+ macro_build (NULL, "teq", TRAP_FMT, treg, ZERO, 7);
macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", sreg, treg);
}
else
{
- expr1.X_add_number = 8;
- macro_build (&expr1, "bne", "s,t,p", treg, ZERO);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "bne", "s,t,p", treg, ZERO);
macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", sreg, treg);
- macro_build (NULL, "break", "c", 7);
+ macro_build (NULL, "break", BRK_FMT, 7);
+ if (mips_opts.micromips)
+ micromips_add_label ();
}
expr1.X_add_number = -1;
used_at = 1;
load_register (AT, &expr1, dbl);
- expr1.X_add_number = mips_trap ? (dbl ? 12 : 8) : (dbl ? 20 : 16);
- macro_build (&expr1, "bne", "s,t,p", treg, AT);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = mips_trap ? (dbl ? 12 : 8) : (dbl ? 20 : 16);
+ macro_build (&label_expr, "bne", "s,t,p", treg, AT);
if (dbl)
{
expr1.X_add_number = 1;
load_register (AT, &expr1, dbl);
- macro_build (NULL, "dsll32", "d,w,<", AT, AT, 31);
+ macro_build (NULL, "dsll32", SHFT_FMT, AT, AT, 31);
}
else
{
expr1.X_add_number = 0x80000000;
- macro_build (&expr1, "lui", "t,u", AT, BFD_RELOC_HI16);
+ macro_build (&expr1, "lui", LUI_FMT, AT, BFD_RELOC_HI16);
}
if (mips_trap)
{
- macro_build (NULL, "teq", "s,t,q", sreg, AT, 6);
+ macro_build (NULL, "teq", TRAP_FMT, sreg, AT, 6);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
end_noreorder ();
}
else
{
- expr1.X_add_number = 8;
- macro_build (&expr1, "bne", "s,t,p", sreg, AT);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "bne", "s,t,p", sreg, AT);
macro_build (NULL, "nop", "");
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
end_noreorder ();
- macro_build (NULL, "break", "c", 6);
+ macro_build (NULL, "break", BRK_FMT, 6);
}
- macro_build (NULL, s, "d", dreg);
+ if (mips_opts.micromips)
+ micromips_add_label ();
+ macro_build (NULL, s, MFHL_FMT, dreg);
break;
case M_DIV_3I:
{
as_warn (_("Divide by zero."));
if (mips_trap)
- macro_build (NULL, "teq", "s,t,q", ZERO, ZERO, 7);
+ macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
else
- macro_build (NULL, "break", "c", 7);
+ macro_build (NULL, "break", BRK_FMT, 7);
break;
}
if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
used_at = 1;
load_register (AT, &imm_expr, dbl);
macro_build (NULL, s, "z,s,t", sreg, AT);
- macro_build (NULL, s2, "d", dreg);
+ macro_build (NULL, s2, MFHL_FMT, dreg);
break;
case M_DIVU_3:
start_noreorder ();
if (mips_trap)
{
- macro_build (NULL, "teq", "s,t,q", treg, ZERO, 7);
+ macro_build (NULL, "teq", TRAP_FMT, treg, ZERO, 7);
macro_build (NULL, s, "z,s,t", sreg, treg);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
}
else
{
- expr1.X_add_number = 8;
- macro_build (&expr1, "bne", "s,t,p", treg, ZERO);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "bne", "s,t,p", treg, ZERO);
macro_build (NULL, s, "z,s,t", sreg, treg);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
end_noreorder ();
- macro_build (NULL, "break", "c", 7);
+ macro_build (NULL, "break", BRK_FMT, 7);
+ if (mips_opts.micromips)
+ micromips_add_label ();
}
- macro_build (NULL, s2, "d", dreg);
+ macro_build (NULL, s2, MFHL_FMT, dreg);
break;
case M_DLCA_AB:
if (used_at == 0 && mips_opts.at)
{
- macro_build (&offset_expr, "lui", "t,u",
+ macro_build (&offset_expr, "lui", LUI_FMT,
tempreg, BFD_RELOC_MIPS_HIGHEST);
- macro_build (&offset_expr, "lui", "t,u",
+ macro_build (&offset_expr, "lui", LUI_FMT,
AT, BFD_RELOC_HI16_S);
macro_build (&offset_expr, "daddiu", "t,r,j",
tempreg, tempreg, BFD_RELOC_MIPS_HIGHER);
macro_build (&offset_expr, "daddiu", "t,r,j",
AT, AT, BFD_RELOC_LO16);
- macro_build (NULL, "dsll32", "d,w,<", tempreg, tempreg, 0);
+ macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0);
macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT);
used_at = 1;
}
else
{
- macro_build (&offset_expr, "lui", "t,u",
+ macro_build (&offset_expr, "lui", LUI_FMT,
tempreg, BFD_RELOC_MIPS_HIGHEST);
macro_build (&offset_expr, "daddiu", "t,r,j",
tempreg, tempreg, BFD_RELOC_MIPS_HIGHER);
- macro_build (NULL, "dsll", "d,w,<", tempreg, tempreg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
macro_build (&offset_expr, "daddiu", "t,r,j",
tempreg, tempreg, BFD_RELOC_HI16_S);
- macro_build (NULL, "dsll", "d,w,<", tempreg, tempreg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
macro_build (&offset_expr, "daddiu", "t,r,j",
tempreg, tempreg, BFD_RELOC_LO16);
}
{
expr1.X_add_number = offset_expr.X_add_number;
offset_expr.X_add_number =
- ((offset_expr.X_add_number + 0x8000) & 0xffff) - 0x8000;
+ SEXT_16BIT (offset_expr.X_add_number);
load_got_offset (tempreg, &offset_expr);
offset_expr.X_add_number = expr1.X_add_number;
/* If we are going to add in a base register, and the
lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16;
lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16;
}
- macro_build (&offset_expr, "lui", "t,u", tempreg, lui_reloc_type);
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, mips_gp_register);
macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
used_at = 1;
}
- offset_expr.X_add_number =
- ((expr1.X_add_number + 0x8000) & 0xffff) - 0x8000;
+ offset_expr.X_add_number = SEXT_16BIT (expr1.X_add_number);
relax_switch ();
if (gpdelay)
lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16;
lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16;
}
- macro_build (&offset_expr, "lui", "t,u", tempreg, lui_reloc_type);
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, mips_gp_register);
macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)",
break;
case M_MSGSND:
+ gas_assert (!mips_opts.micromips);
{
unsigned long temp = (treg << 16) | (0x01);
macro_build (NULL, "c2", "C", temp);
break;
case M_MSGLD:
+ gas_assert (!mips_opts.micromips);
{
unsigned long temp = (0x02);
macro_build (NULL, "c2", "C", temp);
break;
case M_MSGLD_T:
+ gas_assert (!mips_opts.micromips);
{
unsigned long temp = (treg << 16) | (0x02);
macro_build (NULL, "c2", "C", temp);
break;
case M_MSGWAIT:
+ gas_assert (!mips_opts.micromips);
macro_build (NULL, "c2", "C", 3);
break;
case M_MSGWAIT_T:
+ gas_assert (!mips_opts.micromips);
{
unsigned long temp = (treg << 16) | 0x03;
macro_build (NULL, "c2", "C", temp);
/* The jal instructions must be handled as macros because when
generating PIC code they expand to multi-instruction
sequences. Normally they are simple instructions. */
+ case M_JALS_1:
+ dreg = RA;
+ /* Fall through. */
+ case M_JALS_2:
+ gas_assert (mips_opts.micromips);
+ jals = 1;
+ goto jal;
case M_JAL_1:
dreg = RA;
/* Fall through. */
case M_JAL_2:
+ jal:
if (mips_pic == NO_PIC)
- macro_build (NULL, "jalr", "d,s", dreg, sreg);
+ {
+ s = jals ? "jalrs" : "jalr";
+ if (mips_opts.micromips
+ && dreg == RA
+ && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, s, "mj", sreg);
+ else
+ macro_build (NULL, s, JALR_FMT, dreg, sreg);
+ }
else
{
+ int cprestore = (mips_pic == SVR4_PIC && !HAVE_NEWABI
+ && mips_cprestore_offset >= 0);
+
if (sreg != PIC_CALL_REG)
as_warn (_("MIPS PIC call to register other than $25"));
- macro_build (NULL, "jalr", "d,s", dreg, sreg);
+ s = (mips_opts.micromips && (!mips_opts.noreorder || cprestore)
+ ? "jalrs" : "jalr");
+ if (mips_opts.micromips
+ && dreg == RA
+ && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
+ macro_build (NULL, s, "mj", sreg);
+ else
+ macro_build (NULL, s, JALR_FMT, dreg, sreg);
if (mips_pic == SVR4_PIC && !HAVE_NEWABI)
{
if (mips_cprestore_offset < 0)
break;
+ case M_JALS_A:
+ gas_assert (mips_opts.micromips);
+ jals = 1;
+ /* Fall through. */
case M_JAL_A:
if (mips_pic == NO_PIC)
- macro_build (&offset_expr, "jal", "a");
+ macro_build (&offset_expr, jals ? "jals" : "jal", "a");
else if (mips_pic == SVR4_PIC)
{
/* If this is a reference to an external symbol, and we are
else
{
relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", "t,u", PIC_CALL_REG,
+ macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG,
BFD_RELOC_MIPS_CALL_HI16);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG,
PIC_CALL_REG, mips_gp_register);
relax_end ();
}
- macro_build_jalr (&offset_expr);
+ macro_build_jalr (&offset_expr, 0);
}
else
{
int gpdelay;
gpdelay = reg_needs_delay (mips_gp_register);
- macro_build (&offset_expr, "lui", "t,u", PIC_CALL_REG,
+ macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG,
BFD_RELOC_MIPS_CALL_HI16);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG,
PIC_CALL_REG, mips_gp_register);
macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
PIC_CALL_REG, PIC_CALL_REG, BFD_RELOC_LO16);
relax_end ();
- macro_build_jalr (&offset_expr);
+ macro_build_jalr (&offset_expr, mips_cprestore_offset >= 0);
if (mips_cprestore_offset < 0)
as_warn (_("No .cprestore pseudo-op used in PIC code"));
break;
+ case M_LBUE_AB:
+ ab = 1;
+ case M_LBUE_OB:
+ s = "lbue";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LHUE_AB:
+ ab = 1;
+ case M_LHUE_OB:
+ s = "lhue";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LBE_AB:
+ ab = 1;
+ case M_LBE_OB:
+ s = "lbe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LHE_AB:
+ ab = 1;
+ case M_LHE_OB:
+ s = "lhe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LLE_AB:
+ ab = 1;
+ case M_LLE_OB:
+ s = "lle";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LWE_AB:
+ ab = 1;
+ case M_LWE_OB:
+ s = "lwe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LWLE_AB:
+ ab = 1;
+ case M_LWLE_OB:
+ s = "lwle";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_LWRE_AB:
+ ab = 1;
+ case M_LWRE_OB:
+ s = "lwre";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SBE_AB:
+ ab = 1;
+ case M_SBE_OB:
+ s = "sbe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SCE_AB:
+ ab = 1;
+ case M_SCE_OB:
+ s = "sce";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SHE_AB:
+ ab = 1;
+ case M_SHE_OB:
+ s = "she";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SWE_AB:
+ ab = 1;
+ case M_SWE_OB:
+ s = "swe";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SWLE_AB:
+ ab = 1;
+ case M_SWLE_OB:
+ s = "swle";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_SWRE_AB:
+ ab = 1;
+ case M_SWRE_OB:
+ s = "swre";
+ fmt = "t,+j(b)";
+ offbits = 9;
+ goto ld_st;
+ case M_ACLR_AB:
+ ab = 1;
+ case M_ACLR_OB:
+ s = "aclr";
+ treg = EXTRACT_OPERAND (mips_opts.micromips, 3BITPOS, *ip);
+ fmt = "\\,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_ASET_AB:
+ ab = 1;
+ case M_ASET_OB:
+ s = "aset";
+ treg = EXTRACT_OPERAND (mips_opts.micromips, 3BITPOS, *ip);
+ fmt = "\\,~(b)";
+ offbits = 12;
+ goto ld_st;
case M_LB_AB:
+ ab = 1;
s = "lb";
+ fmt = "t,o(b)";
goto ld;
case M_LBU_AB:
+ ab = 1;
s = "lbu";
+ fmt = "t,o(b)";
goto ld;
case M_LH_AB:
+ ab = 1;
s = "lh";
+ fmt = "t,o(b)";
goto ld;
case M_LHU_AB:
+ ab = 1;
s = "lhu";
+ fmt = "t,o(b)";
goto ld;
case M_LW_AB:
+ ab = 1;
s = "lw";
+ fmt = "t,o(b)";
goto ld;
case M_LWC0_AB:
+ ab = 1;
+ gas_assert (!mips_opts.micromips);
s = "lwc0";
+ fmt = "E,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto ld;
+ goto ld_st;
case M_LWC1_AB:
+ ab = 1;
s = "lwc1";
+ fmt = "T,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto ld;
+ goto ld_st;
case M_LWC2_AB:
+ ab = 1;
+ case M_LWC2_OB:
s = "lwc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
/* Itbl support may require additional care here. */
coproc = 1;
- goto ld;
+ goto ld_st;
case M_LWC3_AB:
+ ab = 1;
+ gas_assert (!mips_opts.micromips);
s = "lwc3";
+ fmt = "E,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto ld;
+ goto ld_st;
case M_LWL_AB:
+ ab = 1;
+ case M_LWL_OB:
s = "lwl";
- lr = 1;
- goto ld;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_LWR_AB:
+ ab = 1;
+ case M_LWR_OB:
s = "lwr";
- lr = 1;
- goto ld;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_LDC1_AB:
+ ab = 1;
s = "ldc1";
+ fmt = "T,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto ld;
+ goto ld_st;
case M_LDC2_AB:
+ ab = 1;
+ case M_LDC2_OB:
s = "ldc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
/* Itbl support may require additional care here. */
coproc = 1;
- goto ld;
+ goto ld_st;
+ case M_LQC2_AB:
+ ab = 1;
+ s = "lqc2";
+ fmt = "E,o(b)";
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
case M_LDC3_AB:
+ ab = 1;
s = "ldc3";
+ fmt = "E,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto ld;
+ goto ld_st;
case M_LDL_AB:
+ ab = 1;
+ case M_LDL_OB:
s = "ldl";
- lr = 1;
- goto ld;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_LDR_AB:
+ ab = 1;
+ case M_LDR_OB:
s = "ldr";
- lr = 1;
- goto ld;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_LL_AB:
+ ab = 1;
+ case M_LL_OB:
s = "ll";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
goto ld;
case M_LLD_AB:
+ ab = 1;
+ case M_LLD_OB:
s = "lld";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
goto ld;
case M_LWU_AB:
+ ab = 1;
+ case M_LWU_OB:
s = "lwu";
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld;
+ case M_LWP_AB:
+ ab = 1;
+ case M_LWP_OB:
+ gas_assert (mips_opts.micromips);
+ s = "lwp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ lp = 1;
+ goto ld;
+ case M_LDP_AB:
+ ab = 1;
+ case M_LDP_OB:
+ gas_assert (mips_opts.micromips);
+ s = "ldp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ lp = 1;
+ goto ld;
+ case M_LWM_AB:
+ ab = 1;
+ case M_LWM_OB:
+ gas_assert (mips_opts.micromips);
+ s = "lwm";
+ fmt = "n,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_LDM_AB:
+ ab = 1;
+ case M_LDM_OB:
+ gas_assert (mips_opts.micromips);
+ s = "ldm";
+ fmt = "n,~(b)";
+ offbits = 12;
+ goto ld_st;
+
ld:
- if (breg == treg || coproc || lr)
- {
- tempreg = AT;
- used_at = 1;
- }
+ /* We don't want to use $0 as tempreg. */
+ if (breg == treg + lp || treg + lp == ZERO)
+ goto ld_st;
else
- {
- tempreg = treg;
- }
- goto ld_st;
+ tempreg = treg + lp;
+ goto ld_noat;
+
case M_SB_AB:
+ ab = 1;
s = "sb";
- goto st;
+ fmt = "t,o(b)";
+ goto ld_st;
case M_SH_AB:
+ ab = 1;
s = "sh";
- goto st;
+ fmt = "t,o(b)";
+ goto ld_st;
case M_SW_AB:
+ ab = 1;
s = "sw";
- goto st;
+ fmt = "t,o(b)";
+ goto ld_st;
case M_SWC0_AB:
+ ab = 1;
+ gas_assert (!mips_opts.micromips);
s = "swc0";
+ fmt = "E,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto st;
+ goto ld_st;
case M_SWC1_AB:
+ ab = 1;
s = "swc1";
+ fmt = "T,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto st;
+ goto ld_st;
case M_SWC2_AB:
+ ab = 1;
+ case M_SWC2_OB:
s = "swc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
/* Itbl support may require additional care here. */
coproc = 1;
- goto st;
+ goto ld_st;
case M_SWC3_AB:
+ ab = 1;
+ gas_assert (!mips_opts.micromips);
s = "swc3";
+ fmt = "E,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto st;
+ goto ld_st;
case M_SWL_AB:
+ ab = 1;
+ case M_SWL_OB:
s = "swl";
- goto st;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_SWR_AB:
+ ab = 1;
+ case M_SWR_OB:
s = "swr";
- goto st;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_SC_AB:
+ ab = 1;
+ case M_SC_OB:
s = "sc";
- goto st;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_SCD_AB:
+ ab = 1;
+ case M_SCD_OB:
s = "scd";
- goto st;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_CACHE_AB:
+ ab = 1;
+ case M_CACHE_OB:
s = "cache";
- goto st;
+ fmt = mips_opts.micromips ? "k,~(b)" : "k,o(b)";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_CACHEE_AB:
+ ab = 1;
+ case M_CACHEE_OB:
+ s = "cachee";
+ fmt = "k,+j(b)";
+ offbits = 9;
+ goto ld_st;
case M_PREF_AB:
+ ab = 1;
+ case M_PREF_OB:
s = "pref";
- goto st;
+ fmt = !mips_opts.micromips ? "k,o(b)" : "k,~(b)";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_PREFE_AB:
+ ab = 1;
+ case M_PREFE_OB:
+ s = "prefe";
+ fmt = "k,+j(b)";
+ offbits = 9;
+ goto ld_st;
case M_SDC1_AB:
+ ab = 1;
s = "sdc1";
+ fmt = "T,o(b)";
coproc = 1;
/* Itbl support may require additional care here. */
- goto st;
+ goto ld_st;
case M_SDC2_AB:
+ ab = 1;
+ case M_SDC2_OB:
s = "sdc2";
+ fmt = COP12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ goto ld_st;
+ case M_SQC2_AB:
+ ab = 1;
+ s = "sqc2";
+ fmt = "E,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto st;
+ goto ld_st;
case M_SDC3_AB:
+ ab = 1;
+ gas_assert (!mips_opts.micromips);
s = "sdc3";
+ fmt = "E,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
- goto st;
+ goto ld_st;
case M_SDL_AB:
+ ab = 1;
+ case M_SDL_OB:
s = "sdl";
- goto st;
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
case M_SDR_AB:
+ ab = 1;
+ case M_SDR_OB:
s = "sdr";
- st:
+ fmt = MEM12_FMT;
+ offbits = (mips_opts.micromips ? 12 : 16);
+ goto ld_st;
+ case M_SWP_AB:
+ ab = 1;
+ case M_SWP_OB:
+ gas_assert (mips_opts.micromips);
+ s = "swp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_SDP_AB:
+ ab = 1;
+ case M_SDP_OB:
+ gas_assert (mips_opts.micromips);
+ s = "sdp";
+ fmt = "t,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_SWM_AB:
+ ab = 1;
+ case M_SWM_OB:
+ gas_assert (mips_opts.micromips);
+ s = "swm";
+ fmt = "n,~(b)";
+ offbits = 12;
+ goto ld_st;
+ case M_SDM_AB:
+ ab = 1;
+ case M_SDM_OB:
+ gas_assert (mips_opts.micromips);
+ s = "sdm";
+ fmt = "n,~(b)";
+ offbits = 12;
+
+ ld_st:
tempreg = AT;
used_at = 1;
- ld_st:
- if (coproc
- && NO_ISA_COP (mips_opts.arch)
- && (ip->insn_mo->pinfo2 & (INSN2_M_FP_S | INSN2_M_FP_D)) == 0)
- {
- as_bad (_("Opcode not supported on this processor: %s"),
- mips_cpu_info_from_arch (mips_opts.arch)->name);
- break;
- }
-
- /* Itbl support may require additional care here. */
- if (mask == M_LWC1_AB
- || mask == M_SWC1_AB
- || mask == M_LDC1_AB
- || mask == M_SDC1_AB
- || mask == M_L_DAB
- || mask == M_S_DAB)
- fmt = "T,o(b)";
- else if (mask == M_CACHE_AB || mask == M_PREF_AB)
- fmt = "k,o(b)";
- else if (coproc)
- fmt = "E,o(b)";
- else
- fmt = "t,o(b)";
-
+ ld_noat:
if (offset_expr.X_op != O_constant
&& offset_expr.X_op != O_symbol)
{
is in non PIC code. */
if (offset_expr.X_op == O_constant)
{
+ int hipart = 0;
+
expr1.X_add_number = offset_expr.X_add_number;
normalize_address_expr (&expr1);
- if (!IS_SEXT_16BIT_NUM (expr1.X_add_number))
+ if ((offbits == 0 || offbits == 16)
+ && !IS_SEXT_16BIT_NUM (expr1.X_add_number))
{
expr1.X_add_number = ((expr1.X_add_number + 0x8000)
& ~(bfd_vma) 0xffff);
+ hipart = 1;
+ }
+ else if (offbits == 12 && !IS_SEXT_12BIT_NUM (expr1.X_add_number))
+ {
+ expr1.X_add_number = ((expr1.X_add_number + 0x800)
+ & ~(bfd_vma) 0xfff);
+ hipart = 1;
+ }
+ else if (offbits == 9 && !IS_SEXT_9BIT_NUM (expr1.X_add_number))
+ {
+ expr1.X_add_number = ((expr1.X_add_number + 0x100)
+ & ~(bfd_vma) 0x1ff);
+ hipart = 1;
+ }
+ if (hipart)
+ {
load_register (tempreg, &expr1, HAVE_64BIT_ADDRESSES);
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
breg = tempreg;
}
- macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16, breg);
+ if (offbits == 0)
+ {
+ if (offset_expr.X_add_number == 0)
+ tempreg = breg;
+ else
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN,
+ "t,r,j", tempreg, breg, BFD_RELOC_LO16);
+ macro_build (NULL, s, fmt, treg, tempreg);
+ }
+ else if (offbits == 16)
+ macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16, breg);
+ else
+ macro_build (NULL, s, fmt,
+ treg, (unsigned long) offset_expr.X_add_number, breg);
+ }
+ else if (offbits != 16)
+ {
+ /* The offset field is too narrow to be used for a low-part
+ relocation, so load the whole address into the auxillary
+ register. In the case of "A(b)" addresses, we first load
+ absolute address "A" into the register and then add base
+ register "b". In the case of "o(b)" addresses, we simply
+ need to add 16-bit offset "o" to base register "b", and
+ offset_reloc already contains the relocations associated
+ with "o". */
+ if (ab)
+ {
+ load_address (tempreg, &offset_expr, &used_at);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ }
+ else
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, breg, -1,
+ offset_reloc[0], offset_reloc[1], offset_reloc[2]);
+ expr1.X_add_number = 0;
+ if (offbits == 0)
+ macro_build (NULL, s, fmt, treg, tempreg);
+ else
+ macro_build (NULL, s, fmt,
+ treg, (unsigned long) expr1.X_add_number, tempreg);
}
else if (mips_pic == NO_PIC)
{
if (used_at == 0 && mips_opts.at)
{
- macro_build (&offset_expr, "lui", "t,u", tempreg,
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
BFD_RELOC_MIPS_HIGHEST);
- macro_build (&offset_expr, "lui", "t,u", AT,
+ macro_build (&offset_expr, "lui", LUI_FMT, AT,
BFD_RELOC_HI16_S);
macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
tempreg, BFD_RELOC_MIPS_HIGHER);
if (breg != 0)
macro_build (NULL, "daddu", "d,v,t", AT, AT, breg);
- macro_build (NULL, "dsll32", "d,w,<", tempreg, tempreg, 0);
+ macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0);
macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT);
macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16,
tempreg);
}
else
{
- macro_build (&offset_expr, "lui", "t,u", tempreg,
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
BFD_RELOC_MIPS_HIGHEST);
macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
tempreg, BFD_RELOC_MIPS_HIGHER);
- macro_build (NULL, "dsll", "d,w,<", tempreg, tempreg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
macro_build (&offset_expr, "daddiu", "t,r,j", tempreg,
tempreg, BFD_RELOC_HI16_S);
- macro_build (NULL, "dsll", "d,w,<", tempreg, tempreg, 16);
+ macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16);
if (breg != 0)
macro_build (NULL, "daddu", "d,v,t",
tempreg, tempreg, breg);
as_bad (_("PIC code offset overflow (max 16 signed bits)"));
gpdelay = reg_needs_delay (mips_gp_register);
relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", "t,u", tempreg,
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
BFD_RELOC_MIPS_GOT_HI16);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg,
mips_gp_register);
|| expr1.X_add_number >= 0x8000)
as_bad (_("PIC code offset overflow (max 16 signed bits)"));
relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", "t,u", tempreg,
+ macro_build (&offset_expr, "lui", LUI_FMT, tempreg,
BFD_RELOC_MIPS_GOT_HI16);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg,
mips_gp_register);
s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol));
if (strcmp (s, ".lit8") == 0)
{
- if (mips_opts.isa != ISA_MIPS1)
+ if (CPU_HAS_LDC1_SDC1 (mips_opts.arch) || mips_opts.micromips)
{
macro_build (&offset_expr, "ldc1", "T,o(b)", treg,
BFD_RELOC_MIPS_LITERAL, mips_gp_register);
macro_build_lui (&offset_expr, AT);
}
- if (mips_opts.isa != ISA_MIPS1)
+ if (CPU_HAS_LDC1_SDC1 (mips_opts.arch) || mips_opts.micromips)
{
macro_build (&offset_expr, "ldc1", "T,o(b)",
treg, BFD_RELOC_LO16, AT);
to adjust when loading from memory. */
r = BFD_RELOC_LO16;
dob:
- gas_assert (mips_opts.isa == ISA_MIPS1);
+ gas_assert (!mips_opts.micromips);
+ gas_assert (!CPU_HAS_LDC1_SDC1 (mips_opts.arch));
macro_build (&offset_expr, "lwc1", "T,o(b)",
target_big_endian ? treg + 1 : treg, r, breg);
/* FIXME: A possible overflow which I don't know how to deal
break;
case M_S_DOB:
- gas_assert (mips_opts.isa == ISA_MIPS1);
+ gas_assert (!mips_opts.micromips);
+ gas_assert (!CPU_HAS_LDC1_SDC1 (mips_opts.arch));
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when storing to memory. */
macro_build (&offset_expr, "swc1", "T,o(b)",
break;
case M_L_DAB:
+ gas_assert (!mips_opts.micromips);
/*
* The MIPS assembler seems to check for X_add_number not
* being double aligned and generating:
*/
/* Itbl support may require additional care here. */
coproc = 1;
- if (mips_opts.isa != ISA_MIPS1)
+ fmt = "T,o(b)";
+ if (CPU_HAS_LDC1_SDC1 (mips_opts.arch))
{
s = "ldc1";
- goto ld;
+ goto ld_st;
}
-
s = "lwc1";
- fmt = "T,o(b)";
goto ldd_std;
case M_S_DAB:
- if (mips_opts.isa != ISA_MIPS1)
+ gas_assert (!mips_opts.micromips);
+ /* Itbl support may require additional care here. */
+ coproc = 1;
+ fmt = "T,o(b)";
+ if (CPU_HAS_LDC1_SDC1 (mips_opts.arch))
{
s = "sdc1";
- goto st;
+ goto ld_st;
}
-
s = "swc1";
- fmt = "T,o(b)";
- /* Itbl support may require additional care here. */
- coproc = 1;
goto ldd_std;
+ case M_LQ_AB:
+ fmt = "t,o(b)";
+ s = "lq";
+ goto ld;
+
+ case M_SQ_AB:
+ fmt = "t,o(b)";
+ s = "sq";
+ goto ld_st;
+
case M_LD_AB:
+ fmt = "t,o(b)";
if (HAVE_64BIT_GPRS)
{
s = "ld";
goto ld;
}
-
s = "lw";
- fmt = "t,o(b)";
goto ldd_std;
case M_SD_AB:
+ fmt = "t,o(b)";
if (HAVE_64BIT_GPRS)
{
s = "sd";
- goto st;
+ goto ld_st;
}
-
s = "sw";
- fmt = "t,o(b)";
ldd_std:
if (offset_expr.X_op != O_symbol
as_bad (_("PIC code offset overflow (max 16 signed bits)"));
gpdelay = reg_needs_delay (mips_gp_register);
relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, "lui", "t,u",
+ macro_build (&offset_expr, "lui", LUI_FMT,
AT, BFD_RELOC_MIPS_GOT_HI16);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
AT, AT, mips_gp_register);
}
break;
+
+ case M_SAA_AB:
+ ab = 1;
+ case M_SAA_OB:
+ s = "saa";
+ offbits = 0;
+ fmt = "t,(b)";
+ goto ld_st;
+ case M_SAAD_AB:
+ ab = 1;
+ case M_SAAD_OB:
+ s = "saad";
+ offbits = 0;
+ fmt = "t,(b)";
+ goto ld_st;
+
/* New code added to support COPZ instructions.
This code builds table entries out of the macros in mip_opcodes.
R4000 uses interlocks to handle coproc delays.
case M_COP3:
s = "c3";
copz:
- if (NO_ISA_COP (mips_opts.arch)
- && (ip->insn_mo->pinfo2 & INSN2_M_FP_S) == 0)
- {
- as_bad (_("opcode not supported on this processor: %s"),
- mips_cpu_info_from_arch (mips_opts.arch)->name);
- break;
- }
-
+ gas_assert (!mips_opts.micromips);
/* For now we just do C (same as Cz). The parameter will be
stored in insn_opcode by mips_ip. */
macro_build (NULL, s, "C", ip->insn_opcode);
case M_DMUL:
dbl = 1;
case M_MUL:
+ if (mips_opts.arch == CPU_R5900)
+ {
+ macro_build (NULL, dbl ? "dmultu" : "multu", "d,s,t", dreg, sreg, treg);
+ }
+ else
+ {
macro_build (NULL, dbl ? "dmultu" : "multu", "s,t", sreg, treg);
- macro_build (NULL, "mflo", "d", dreg);
+ macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ }
break;
case M_DMUL_I:
used_at = 1;
load_register (AT, &imm_expr, dbl);
macro_build (NULL, dbl ? "dmult" : "mult", "s,t", sreg, AT);
- macro_build (NULL, "mflo", "d", dreg);
+ macro_build (NULL, "mflo", MFHL_FMT, dreg);
break;
case M_DMULO_I:
if (imm)
load_register (AT, &imm_expr, dbl);
macro_build (NULL, dbl ? "dmult" : "mult", "s,t", sreg, imm ? AT : treg);
- macro_build (NULL, "mflo", "d", dreg);
- macro_build (NULL, dbl ? "dsra32" : "sra", "d,w,<", dreg, dreg, RA);
- macro_build (NULL, "mfhi", "d", AT);
+ macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ macro_build (NULL, dbl ? "dsra32" : "sra", SHFT_FMT, dreg, dreg, RA);
+ macro_build (NULL, "mfhi", MFHL_FMT, AT);
if (mips_trap)
- macro_build (NULL, "tne", "s,t,q", dreg, AT, 6);
+ macro_build (NULL, "tne", TRAP_FMT, dreg, AT, 6);
else
{
- expr1.X_add_number = 8;
- macro_build (&expr1, "beq", "s,t,p", dreg, AT);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "beq", "s,t,p", dreg, AT);
macro_build (NULL, "nop", "");
- macro_build (NULL, "break", "c", 6);
+ macro_build (NULL, "break", BRK_FMT, 6);
+ if (mips_opts.micromips)
+ micromips_add_label ();
}
end_noreorder ();
- macro_build (NULL, "mflo", "d", dreg);
+ macro_build (NULL, "mflo", MFHL_FMT, dreg);
break;
case M_DMULOU_I:
load_register (AT, &imm_expr, dbl);
macro_build (NULL, dbl ? "dmultu" : "multu", "s,t",
sreg, imm ? AT : treg);
- macro_build (NULL, "mfhi", "d", AT);
- macro_build (NULL, "mflo", "d", dreg);
+ macro_build (NULL, "mfhi", MFHL_FMT, AT);
+ macro_build (NULL, "mflo", MFHL_FMT, dreg);
if (mips_trap)
- macro_build (NULL, "tne", "s,t,q", AT, ZERO, 6);
+ macro_build (NULL, "tne", TRAP_FMT, AT, ZERO, 6);
else
{
- expr1.X_add_number = 8;
- macro_build (&expr1, "beq", "s,t,p", AT, ZERO);
+ if (mips_opts.micromips)
+ micromips_label_expr (&label_expr);
+ else
+ label_expr.X_add_number = 8;
+ macro_build (&label_expr, "beq", "s,t,p", AT, ZERO);
macro_build (NULL, "nop", "");
- macro_build (NULL, "break", "c", 6);
+ macro_build (NULL, "break", BRK_FMT, 6);
+ if (mips_opts.micromips)
+ micromips_add_label ();
}
end_noreorder ();
break;
{
rot = (64 - rot) & 0x3f;
if (rot >= 32)
- macro_build (NULL, "dror32", "d,w,<", dreg, sreg, rot - 32);
+ macro_build (NULL, "dror32", SHFT_FMT, dreg, sreg, rot - 32);
else
- macro_build (NULL, "dror", "d,w,<", dreg, sreg, rot);
+ macro_build (NULL, "dror", SHFT_FMT, dreg, sreg, rot);
break;
}
if (rot == 0)
{
- macro_build (NULL, "dsrl", "d,w,<", dreg, sreg, 0);
+ macro_build (NULL, "dsrl", SHFT_FMT, dreg, sreg, 0);
break;
}
l = (rot < 0x20) ? "dsll" : "dsll32";
rr = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32";
rot &= 0x1f;
used_at = 1;
- macro_build (NULL, l, "d,w,<", AT, sreg, rot);
- macro_build (NULL, rr, "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build (NULL, l, SHFT_FMT, AT, sreg, rot);
+ macro_build (NULL, rr, SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
}
break;
rot = imm_expr.X_add_number & 0x1f;
if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
{
- macro_build (NULL, "ror", "d,w,<", dreg, sreg, (32 - rot) & 0x1f);
+ macro_build (NULL, "ror", SHFT_FMT, dreg, sreg, (32 - rot) & 0x1f);
break;
}
if (rot == 0)
{
- macro_build (NULL, "srl", "d,w,<", dreg, sreg, 0);
+ macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, 0);
break;
}
used_at = 1;
- macro_build (NULL, "sll", "d,w,<", AT, sreg, rot);
- macro_build (NULL, "srl", "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build (NULL, "sll", SHFT_FMT, AT, sreg, rot);
+ macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
}
break;
if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
{
if (rot >= 32)
- macro_build (NULL, "dror32", "d,w,<", dreg, sreg, rot - 32);
+ macro_build (NULL, "dror32", SHFT_FMT, dreg, sreg, rot - 32);
else
- macro_build (NULL, "dror", "d,w,<", dreg, sreg, rot);
+ macro_build (NULL, "dror", SHFT_FMT, dreg, sreg, rot);
break;
}
if (rot == 0)
{
- macro_build (NULL, "dsrl", "d,w,<", dreg, sreg, 0);
+ macro_build (NULL, "dsrl", SHFT_FMT, dreg, sreg, 0);
break;
}
rr = (rot < 0x20) ? "dsrl" : "dsrl32";
l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32";
rot &= 0x1f;
used_at = 1;
- macro_build (NULL, rr, "d,w,<", AT, sreg, rot);
- macro_build (NULL, l, "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build (NULL, rr, SHFT_FMT, AT, sreg, rot);
+ macro_build (NULL, l, SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
}
break;
rot = imm_expr.X_add_number & 0x1f;
if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
{
- macro_build (NULL, "ror", "d,w,<", dreg, sreg, rot);
+ macro_build (NULL, "ror", SHFT_FMT, dreg, sreg, rot);
break;
}
if (rot == 0)
{
- macro_build (NULL, "srl", "d,w,<", dreg, sreg, 0);
+ macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, 0);
break;
}
used_at = 1;
- macro_build (NULL, "srl", "d,w,<", AT, sreg, rot);
- macro_build (NULL, "sll", "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build (NULL, "srl", SHFT_FMT, AT, sreg, rot);
+ macro_build (NULL, "sll", SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
}
break;
macro_build (NULL, "sltu", "d,v,t", dreg, 0, dreg);
break;
+ case M_SUB_I:
+ s = "addi";
+ s2 = "sub";
+ goto do_subi;
+ case M_SUBU_I:
+ s = "addiu";
+ s2 = "subu";
+ goto do_subi;
case M_DSUB_I:
dbl = 1;
- case M_SUB_I:
+ s = "daddi";
+ s2 = "dsub";
+ if (!mips_opts.micromips)
+ goto do_subi;
if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x8000
- && imm_expr.X_add_number <= 0x8000)
+ && imm_expr.X_add_number > -0x200
+ && imm_expr.X_add_number <= 0x200)
{
- imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, dbl ? "daddi" : "addi", "t,r,j",
- dreg, sreg, BFD_RELOC_LO16);
+ macro_build (NULL, s, "t,r,.", dreg, sreg, -imm_expr.X_add_number);
break;
}
- used_at = 1;
- load_register (AT, &imm_expr, dbl);
- macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", dreg, sreg, AT);
- break;
-
+ goto do_subi_i;
case M_DSUBU_I:
dbl = 1;
- case M_SUBU_I:
+ s = "daddiu";
+ s2 = "dsubu";
+ do_subi:
if (imm_expr.X_op == O_constant
&& imm_expr.X_add_number > -0x8000
&& imm_expr.X_add_number <= 0x8000)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "t,r,j",
- dreg, sreg, BFD_RELOC_LO16);
+ macro_build (&imm_expr, s, "t,r,j", dreg, sreg, BFD_RELOC_LO16);
break;
}
+ do_subi_i:
used_at = 1;
load_register (AT, &imm_expr, dbl);
- macro_build (NULL, dbl ? "dsubu" : "subu", "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, s2, "d,v,t", dreg, sreg, AT);
break;
case M_TEQ_I:
case M_TRUNCWS:
case M_TRUNCWD:
+ gas_assert (!mips_opts.micromips);
gas_assert (mips_opts.isa == ISA_MIPS1);
used_at = 1;
sreg = (ip->insn_opcode >> 11) & 0x1f; /* floating reg */
end_noreorder ();
break;
+ case M_ULH_A:
+ ab = 1;
case M_ULH:
s = "lb";
- goto ulh;
+ s2 = "lbu";
+ off = 1;
+ goto uld_st;
+ case M_ULHU_A:
+ ab = 1;
case M_ULHU:
s = "lbu";
- ulh:
- used_at = 1;
- if (offset_expr.X_add_number >= 0x7fff)
- as_bad (_("Operand overflow"));
- if (!target_big_endian)
- ++offset_expr.X_add_number;
- macro_build (&offset_expr, s, "t,o(b)", AT, BFD_RELOC_LO16, breg);
- if (!target_big_endian)
- --offset_expr.X_add_number;
- else
- ++offset_expr.X_add_number;
- macro_build (&offset_expr, "lbu", "t,o(b)", treg, BFD_RELOC_LO16, breg);
- macro_build (NULL, "sll", "d,w,<", AT, AT, 8);
- macro_build (NULL, "or", "d,v,t", treg, treg, AT);
- break;
-
+ s2 = "lbu";
+ off = 1;
+ goto uld_st;
+ case M_ULW_A:
+ ab = 1;
+ case M_ULW:
+ s = "lwl";
+ s2 = "lwr";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ off = 3;
+ goto uld_st;
+ case M_ULD_A:
+ ab = 1;
case M_ULD:
s = "ldl";
s2 = "ldr";
+ offbits = (mips_opts.micromips ? 12 : 16);
off = 7;
- goto ulw;
- case M_ULW:
- s = "lwl";
- s2 = "lwr";
+ goto uld_st;
+ case M_USH_A:
+ ab = 1;
+ case M_USH:
+ s = "sb";
+ s2 = "sb";
+ off = 1;
+ ust = 1;
+ goto uld_st;
+ case M_USW_A:
+ ab = 1;
+ case M_USW:
+ s = "swl";
+ s2 = "swr";
+ offbits = (mips_opts.micromips ? 12 : 16);
off = 3;
- ulw:
- if (offset_expr.X_add_number >= 0x8000 - off)
+ ust = 1;
+ goto uld_st;
+ case M_USD_A:
+ ab = 1;
+ case M_USD:
+ s = "sdl";
+ s2 = "sdr";
+ offbits = (mips_opts.micromips ? 12 : 16);
+ off = 7;
+ ust = 1;
+
+ uld_st:
+ if (!ab && offset_expr.X_add_number >= 0x8000 - off)
as_bad (_("Operand overflow"));
- if (treg != breg)
- tempreg = treg;
- else
+
+ ep = &offset_expr;
+ expr1.X_add_number = 0;
+ if (ab)
+ {
+ used_at = 1;
+ tempreg = AT;
+ load_address (tempreg, ep, &used_at);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ breg = tempreg;
+ tempreg = treg;
+ ep = &expr1;
+ }
+ else if (offbits == 12
+ && (offset_expr.X_op != O_constant
+ || !IS_SEXT_12BIT_NUM (offset_expr.X_add_number)
+ || !IS_SEXT_12BIT_NUM (offset_expr.X_add_number + off)))
+ {
+ used_at = 1;
+ tempreg = AT;
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", tempreg, breg,
+ -1, offset_reloc[0], offset_reloc[1], offset_reloc[2]);
+ breg = tempreg;
+ tempreg = treg;
+ ep = &expr1;
+ }
+ else if (!ust && treg == breg)
{
used_at = 1;
tempreg = AT;
}
- if (!target_big_endian)
- offset_expr.X_add_number += off;
- macro_build (&offset_expr, s, "t,o(b)", tempreg, BFD_RELOC_LO16, breg);
- if (!target_big_endian)
- offset_expr.X_add_number -= off;
else
- offset_expr.X_add_number += off;
- macro_build (&offset_expr, s2, "t,o(b)", tempreg, BFD_RELOC_LO16, breg);
+ tempreg = treg;
- /* If necessary, move the result in tempreg to the final destination. */
- if (treg == tempreg)
- break;
- /* Protect second load's delay slot. */
- load_delay_nop ();
- move_register (treg, tempreg);
- break;
+ if (off == 1)
+ goto ulh_sh;
- case M_ULD_A:
- s = "ldl";
- s2 = "ldr";
- off = 7;
- goto ulwa;
- case M_ULW_A:
- s = "lwl";
- s2 = "lwr";
- off = 3;
- ulwa:
- used_at = 1;
- load_address (AT, &offset_expr, &used_at);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, AT, breg);
- if (!target_big_endian)
- expr1.X_add_number = off;
- else
- expr1.X_add_number = 0;
- macro_build (&expr1, s, "t,o(b)", treg, BFD_RELOC_LO16, AT);
if (!target_big_endian)
- expr1.X_add_number = 0;
+ ep->X_add_number += off;
+ if (offbits != 12)
+ macro_build (ep, s, "t,o(b)", tempreg, BFD_RELOC_LO16, breg);
else
- expr1.X_add_number = off;
- macro_build (&expr1, s2, "t,o(b)", treg, BFD_RELOC_LO16, AT);
- break;
+ macro_build (NULL, s, "t,~(b)",
+ tempreg, (unsigned long) ep->X_add_number, breg);
- case M_ULH_A:
- case M_ULHU_A:
- used_at = 1;
- load_address (AT, &offset_expr, &used_at);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, AT, breg);
- if (target_big_endian)
- expr1.X_add_number = 0;
- macro_build (&expr1, mask == M_ULH_A ? "lb" : "lbu", "t,o(b)",
- treg, BFD_RELOC_LO16, AT);
- if (target_big_endian)
- expr1.X_add_number = 1;
+ if (!target_big_endian)
+ ep->X_add_number -= off;
else
- expr1.X_add_number = 0;
- macro_build (&expr1, "lbu", "t,o(b)", AT, BFD_RELOC_LO16, AT);
- macro_build (NULL, "sll", "d,w,<", treg, treg, 8);
- macro_build (NULL, "or", "d,v,t", treg, treg, AT);
- break;
-
- case M_USH:
- used_at = 1;
- if (offset_expr.X_add_number >= 0x7fff)
- as_bad (_("Operand overflow"));
- if (target_big_endian)
- ++offset_expr.X_add_number;
- macro_build (&offset_expr, "sb", "t,o(b)", treg, BFD_RELOC_LO16, breg);
- macro_build (NULL, "srl", "d,w,<", AT, treg, 8);
- if (target_big_endian)
- --offset_expr.X_add_number;
+ ep->X_add_number += off;
+ if (offbits != 12)
+ macro_build (ep, s2, "t,o(b)", tempreg, BFD_RELOC_LO16, breg);
else
- ++offset_expr.X_add_number;
- macro_build (&offset_expr, "sb", "t,o(b)", AT, BFD_RELOC_LO16, breg);
- break;
+ macro_build (NULL, s2, "t,~(b)",
+ tempreg, (unsigned long) ep->X_add_number, breg);
- case M_USD:
- s = "sdl";
- s2 = "sdr";
- off = 7;
- goto usw;
- case M_USW:
- s = "swl";
- s2 = "swr";
- off = 3;
- usw:
- if (offset_expr.X_add_number >= 0x8000 - off)
- as_bad (_("Operand overflow"));
- if (!target_big_endian)
- offset_expr.X_add_number += off;
- macro_build (&offset_expr, s, "t,o(b)", treg, BFD_RELOC_LO16, breg);
- if (!target_big_endian)
- offset_expr.X_add_number -= off;
- else
- offset_expr.X_add_number += off;
- macro_build (&offset_expr, s2, "t,o(b)", treg, BFD_RELOC_LO16, breg);
+ /* If necessary, move the result in tempreg to the final destination. */
+ if (!ust && treg != tempreg)
+ {
+ /* Protect second load's delay slot. */
+ load_delay_nop ();
+ move_register (treg, tempreg);
+ }
break;
- case M_USD_A:
- s = "sdl";
- s2 = "sdr";
- off = 7;
- goto uswa;
- case M_USW_A:
- s = "swl";
- s2 = "swr";
- off = 3;
- uswa:
+ ulh_sh:
used_at = 1;
- load_address (AT, &offset_expr, &used_at);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, AT, breg);
- if (!target_big_endian)
- expr1.X_add_number = off;
- else
- expr1.X_add_number = 0;
- macro_build (&expr1, s, "t,o(b)", treg, BFD_RELOC_LO16, AT);
- if (!target_big_endian)
- expr1.X_add_number = 0;
+ if (target_big_endian == ust)
+ ep->X_add_number += off;
+ tempreg = ust || ab ? treg : AT;
+ macro_build (ep, s, "t,o(b)", tempreg, BFD_RELOC_LO16, breg);
+
+ /* For halfword transfers we need a temporary register to shuffle
+ bytes. Unfortunately for M_USH_A we have none available before
+ the next store as AT holds the base address. We deal with this
+ case by clobbering TREG and then restoring it as with ULH. */
+ tempreg = ust == ab ? treg : AT;
+ if (ust)
+ macro_build (NULL, "srl", SHFT_FMT, tempreg, treg, 8);
+
+ if (target_big_endian == ust)
+ ep->X_add_number -= off;
else
- expr1.X_add_number = off;
- macro_build (&expr1, s2, "t,o(b)", treg, BFD_RELOC_LO16, AT);
- break;
+ ep->X_add_number += off;
+ macro_build (ep, s2, "t,o(b)", tempreg, BFD_RELOC_LO16, breg);
- case M_USH_A:
- used_at = 1;
- load_address (AT, &offset_expr, &used_at);
- if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, AT, breg);
- if (!target_big_endian)
- expr1.X_add_number = 0;
- macro_build (&expr1, "sb", "t,o(b)", treg, BFD_RELOC_LO16, AT);
- macro_build (NULL, "srl", "d,w,<", treg, treg, 8);
- if (!target_big_endian)
- expr1.X_add_number = 1;
- else
- expr1.X_add_number = 0;
- macro_build (&expr1, "sb", "t,o(b)", treg, BFD_RELOC_LO16, AT);
- if (!target_big_endian)
- expr1.X_add_number = 0;
- else
- expr1.X_add_number = 1;
- macro_build (&expr1, "lbu", "t,o(b)", AT, BFD_RELOC_LO16, AT);
- macro_build (NULL, "sll", "d,w,<", treg, treg, 8);
- macro_build (NULL, "or", "d,v,t", treg, treg, AT);
+ /* For M_USH_A re-retrieve the LSB. */
+ if (ust && ab)
+ {
+ if (target_big_endian)
+ ep->X_add_number += off;
+ else
+ ep->X_add_number -= off;
+ macro_build (&expr1, "lbu", "t,o(b)", AT, BFD_RELOC_LO16, AT);
+ }
+ /* For ULH and M_USH_A OR the LSB in. */
+ if (!ust || ab)
+ {
+ tempreg = !ab ? AT : treg;
+ macro_build (NULL, "sll", SHFT_FMT, tempreg, tempreg, 8);
+ macro_build (NULL, "or", "d,v,t", treg, treg, AT);
+ }
break;
default:
switch (mask)
{
default:
- internalError ();
+ abort ();
case M_DDIV_3:
dbl = 1;
case 'G': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
case 'H': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
case 'I': break;
+ case 'J': USE_BITS (OP_MASK_CODE10, OP_SH_CODE10); break;
case 't': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
case 'T': USE_BITS (OP_MASK_RT, OP_SH_RT);
USE_BITS (OP_MASK_SEL, OP_SH_SEL); break;
case 'a': USE_BITS (OP_MASK_OFFSET_A, OP_SH_OFFSET_A); break;
case 'b': USE_BITS (OP_MASK_OFFSET_B, OP_SH_OFFSET_B); break;
case 'c': USE_BITS (OP_MASK_OFFSET_C, OP_SH_OFFSET_C); break;
+ case 'j': USE_BITS (OP_MASK_EVAOFFSET, OP_SH_EVAOFFSET); break;
default:
as_bad (_("internal: bad mips opcode (unknown extension operand type `+%c'): %s %s"),
case '$': USE_BITS (OP_MASK_MT_H, OP_SH_MT_H); break;
case '*': USE_BITS (OP_MASK_MTACC_T, OP_SH_MTACC_T); break;
case '&': USE_BITS (OP_MASK_MTACC_D, OP_SH_MTACC_D); break;
+ case '\\': USE_BITS (OP_MASK_3BITPOS, OP_SH_3BITPOS); break;
+ case '~': USE_BITS (OP_MASK_OFFSET12, OP_SH_OFFSET12); break;
case 'g': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
default:
as_bad (_("internal: bad mips opcode (unknown operand type `%c'): %s %s"),
return 1;
}
+/* For consistency checking, verify that the length implied matches the
+ major opcode and that all bits are specified either by the match/mask
+ part of the instruction definition, or by the operand list. */
+
+static int
+validate_micromips_insn (const struct mips_opcode *opc)
+{
+ unsigned long match = opc->match;
+ unsigned long mask = opc->mask;
+ const char *p = opc->args;
+ unsigned long insn_bits;
+ unsigned long used_bits;
+ unsigned long major;
+ unsigned int length;
+ char e;
+ char c;
+
+ if ((mask & match) != match)
+ {
+ as_bad (_("Internal error: bad microMIPS opcode (mask error): %s %s"),
+ opc->name, opc->args);
+ return 0;
+ }
+ length = micromips_insn_length (opc);
+ if (length != 2 && length != 4)
+ {
+ as_bad (_("Internal error: bad microMIPS opcode (incorrect length: %u): "
+ "%s %s"), length, opc->name, opc->args);
+ return 0;
+ }
+ major = match >> (10 + 8 * (length - 2));
+ if ((length == 2 && (major & 7) != 1 && (major & 6) != 2)
+ || (length == 4 && (major & 7) != 0 && (major & 4) != 4))
+ {
+ as_bad (_("Internal error: bad microMIPS opcode "
+ "(opcode/length mismatch): %s %s"), opc->name, opc->args);
+ return 0;
+ }
+
+ /* Shift piecewise to avoid an overflow where unsigned long is 32-bit. */
+ insn_bits = 1 << 4 * length;
+ insn_bits <<= 4 * length;
+ insn_bits -= 1;
+ used_bits = mask;
+#define USE_BITS(field) \
+ (used_bits |= MICROMIPSOP_MASK_##field << MICROMIPSOP_SH_##field)
+ while (*p)
+ switch (c = *p++)
+ {
+ case ',': break;
+ case '(': break;
+ case ')': break;
+ case '+':
+ e = c;
+ switch (c = *p++)
+ {
+ case 'A': USE_BITS (EXTLSB); break;
+ case 'B': USE_BITS (INSMSB); break;
+ case 'C': USE_BITS (EXTMSBD); break;
+ case 'D': USE_BITS (RS); USE_BITS (SEL); break;
+ case 'E': USE_BITS (EXTLSB); break;
+ case 'F': USE_BITS (INSMSB); break;
+ case 'G': USE_BITS (EXTMSBD); break;
+ case 'H': USE_BITS (EXTMSBD); break;
+ case 'j': USE_BITS (EVAOFFSET); break;
+ default:
+ as_bad (_("Internal error: bad mips opcode "
+ "(unknown extension operand type `%c%c'): %s %s"),
+ e, c, opc->name, opc->args);
+ return 0;
+ }
+ break;
+ case 'm':
+ e = c;
+ switch (c = *p++)
+ {
+ case 'A': USE_BITS (IMMA); break;
+ case 'B': USE_BITS (IMMB); break;
+ case 'C': USE_BITS (IMMC); break;
+ case 'D': USE_BITS (IMMD); break;
+ case 'E': USE_BITS (IMME); break;
+ case 'F': USE_BITS (IMMF); break;
+ case 'G': USE_BITS (IMMG); break;
+ case 'H': USE_BITS (IMMH); break;
+ case 'I': USE_BITS (IMMI); break;
+ case 'J': USE_BITS (IMMJ); break;
+ case 'L': USE_BITS (IMML); break;
+ case 'M': USE_BITS (IMMM); break;
+ case 'N': USE_BITS (IMMN); break;
+ case 'O': USE_BITS (IMMO); break;
+ case 'P': USE_BITS (IMMP); break;
+ case 'Q': USE_BITS (IMMQ); break;
+ case 'U': USE_BITS (IMMU); break;
+ case 'W': USE_BITS (IMMW); break;
+ case 'X': USE_BITS (IMMX); break;
+ case 'Y': USE_BITS (IMMY); break;
+ case 'Z': break;
+ case 'a': break;
+ case 'b': USE_BITS (MB); break;
+ case 'c': USE_BITS (MC); break;
+ case 'd': USE_BITS (MD); break;
+ case 'e': USE_BITS (ME); break;
+ case 'f': USE_BITS (MF); break;
+ case 'g': USE_BITS (MG); break;
+ case 'h': USE_BITS (MH); break;
+ case 'i': USE_BITS (MI); break;
+ case 'j': USE_BITS (MJ); break;
+ case 'l': USE_BITS (ML); break;
+ case 'm': USE_BITS (MM); break;
+ case 'n': USE_BITS (MN); break;
+ case 'p': USE_BITS (MP); break;
+ case 'q': USE_BITS (MQ); break;
+ case 'r': break;
+ case 's': break;
+ case 't': break;
+ case 'x': break;
+ case 'y': break;
+ case 'z': break;
+ default:
+ as_bad (_("Internal error: bad mips opcode "
+ "(unknown extension operand type `%c%c'): %s %s"),
+ e, c, opc->name, opc->args);
+ return 0;
+ }
+ break;
+ case '.': USE_BITS (OFFSET10); break;
+ case '1': USE_BITS (STYPE); break;
+ case '2': USE_BITS (BP); break;
+ case '3': USE_BITS (SA3); break;
+ case '4': USE_BITS (SA4); break;
+ case '5': USE_BITS (IMM8); break;
+ case '6': USE_BITS (RS); break;
+ case '7': USE_BITS (DSPACC); break;
+ case '8': USE_BITS (WRDSP); break;
+ case '0': USE_BITS (DSPSFT); break;
+ case '<': USE_BITS (SHAMT); break;
+ case '>': USE_BITS (SHAMT); break;
+ case '@': USE_BITS (IMM10); break;
+ case 'B': USE_BITS (CODE10); break;
+ case 'C': USE_BITS (COPZ); break;
+ case 'D': USE_BITS (FD); break;
+ case 'E': USE_BITS (RT); break;
+ case 'G': USE_BITS (RS); break;
+ case 'H': USE_BITS (SEL); break;
+ case 'K': USE_BITS (RS); break;
+ case 'M': USE_BITS (CCC); break;
+ case 'N': USE_BITS (BCC); break;
+ case 'R': USE_BITS (FR); break;
+ case 'S': USE_BITS (FS); break;
+ case 'T': USE_BITS (FT); break;
+ case 'V': USE_BITS (FS); break;
+ case '\\': USE_BITS (3BITPOS); break;
+ case '^': USE_BITS (RD); break;
+ case 'a': USE_BITS (TARGET); break;
+ case 'b': USE_BITS (RS); break;
+ case 'c': USE_BITS (CODE); break;
+ case 'd': USE_BITS (RD); break;
+ case 'h': USE_BITS (PREFX); break;
+ case 'i': USE_BITS (IMMEDIATE); break;
+ case 'j': USE_BITS (DELTA); break;
+ case 'k': USE_BITS (CACHE); break;
+ case 'n': USE_BITS (RT); break;
+ case 'o': USE_BITS (DELTA); break;
+ case 'p': USE_BITS (DELTA); break;
+ case 'q': USE_BITS (CODE2); break;
+ case 'r': USE_BITS (RS); break;
+ case 's': USE_BITS (RS); break;
+ case 't': USE_BITS (RT); break;
+ case 'u': USE_BITS (IMMEDIATE); break;
+ case 'v': USE_BITS (RS); break;
+ case 'w': USE_BITS (RT); break;
+ case 'y': USE_BITS (RS3); break;
+ case 'z': break;
+ case '|': USE_BITS (TRAP); break;
+ case '~': USE_BITS (OFFSET12); break;
+ default:
+ as_bad (_("Internal error: bad microMIPS opcode "
+ "(unknown operand type `%c'): %s %s"),
+ c, opc->name, opc->args);
+ return 0;
+ }
+#undef USE_BITS
+ if (used_bits != insn_bits)
+ {
+ if (~used_bits & insn_bits)
+ as_bad (_("Internal error: bad microMIPS opcode "
+ "(bits 0x%lx undefined): %s %s"),
+ ~used_bits & insn_bits, opc->name, opc->args);
+ if (used_bits & ~insn_bits)
+ as_bad (_("Internal error: bad microMIPS opcode "
+ "(bits 0x%lx defined): %s %s"),
+ used_bits & ~insn_bits, opc->name, opc->args);
+ return 0;
+ }
+ return 1;
+}
+
/* UDI immediates. */
struct mips_immed {
char type;
/* Let a macro pass, we'll catch it later when it is expanded. */
return 1;
- if (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa))
+ if (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa) || (mips_opts.arch == CPU_R5900))
{
/* Allow odd registers for single-precision ops. */
switch (insn->pinfo & (FP_S | FP_D))
return 0;
}
+/* Check if EXPR is a constant between MIN (inclusive) and MAX (exclusive)
+ taking bits from BIT up. */
+static int
+expr_const_in_range (expressionS *ep, offsetT min, offsetT max, int bit)
+{
+ return (ep->X_op == O_constant
+ && (ep->X_add_number & ((1 << bit) - 1)) == 0
+ && ep->X_add_number >= min << bit
+ && ep->X_add_number < max << bit);
+}
+
/* This routine assembles an instruction into its binary format. As a
side effect, it sets one of the global variables imm_reloc or
offset_reloc to the type of relocation to do if one of the operands
static void
mips_ip (char *str, struct mips_cl_insn *ip)
{
+ bfd_boolean wrong_delay_slot_insns = FALSE;
+ bfd_boolean need_delay_slot_ok = TRUE;
+ struct mips_opcode *firstinsn = NULL;
+ const struct mips_opcode *past;
+ struct hash_control *hash;
char *s;
const char *args;
char c = 0;
char *argsStart;
unsigned int regno;
unsigned int lastregno;
+ unsigned int destregno = 0;
unsigned int lastpos = 0;
unsigned int limlo, limhi;
+ int sizelo;
char *s_reset;
- char save_c = 0;
offsetT min_range, max_range;
+ long opend;
+ char *name;
int argnum;
unsigned int rtype;
+ char *dot;
+ long end;
insn_error = NULL;
- /* If the instruction contains a '.', we first try to match an instruction
- including the '.'. Then we try again without the '.'. */
+ if (mips_opts.micromips)
+ {
+ hash = micromips_op_hash;
+ past = µmips_opcodes[bfd_micromips_num_opcodes];
+ }
+ else
+ {
+ hash = op_hash;
+ past = &mips_opcodes[NUMOPCODES];
+ }
+ forced_insn_length = 0;
insn = NULL;
- for (s = str; *s != '\0' && !ISSPACE (*s); ++s)
+
+ /* We first try to match an instruction up to a space or to the end. */
+ for (end = 0; str[end] != '\0' && !ISSPACE (str[end]); end++)
continue;
- /* If we stopped on whitespace, then replace the whitespace with null for
- the call to hash_find. Save the character we replaced just in case we
- have to re-parse the instruction. */
- if (ISSPACE (*s))
+ /* Make a copy of the instruction so that we can fiddle with it. */
+ name = alloca (end + 1);
+ memcpy (name, str, end);
+ name[end] = '\0';
+
+ for (;;)
{
- save_c = *s;
- *s++ = '\0';
- }
+ insn = (struct mips_opcode *) hash_find (hash, name);
- insn = (struct mips_opcode *) hash_find (op_hash, str);
+ if (insn != NULL || !mips_opts.micromips)
+ break;
+ if (forced_insn_length)
+ break;
- /* If we didn't find the instruction in the opcode table, try again, but
- this time with just the instruction up to, but not including the
- first '.'. */
+ /* See if there's an instruction size override suffix,
+ either `16' or `32', at the end of the mnemonic proper,
+ that defines the operation, i.e. before the first `.'
+ character if any. Strip it and retry. */
+ dot = strchr (name, '.');
+ opend = dot != NULL ? dot - name : end;
+ if (opend < 3)
+ break;
+ if (name[opend - 2] == '1' && name[opend - 1] == '6')
+ forced_insn_length = 2;
+ else if (name[opend - 2] == '3' && name[opend - 1] == '2')
+ forced_insn_length = 4;
+ else
+ break;
+ memcpy (name + opend - 2, name + opend, end - opend + 1);
+ }
if (insn == NULL)
{
- /* Restore the character we overwrite above (if any). */
- if (save_c)
- *(--s) = save_c;
-
- /* Scan up to the first '.' or whitespace. */
- for (s = str;
- *s != '\0' && *s != '.' && !ISSPACE (*s);
- ++s)
- continue;
-
- /* If we did not find a '.', then we can quit now. */
- if (*s != '.')
- {
- insn_error = _("Unrecognized opcode");
- return;
- }
-
- /* Lookup the instruction in the hash table. */
- *s++ = '\0';
- if ((insn = (struct mips_opcode *) hash_find (op_hash, str)) == NULL)
- {
- insn_error = _("Unrecognized opcode");
- return;
- }
+ insn_error = _("Unrecognized opcode");
+ return;
}
- argsStart = s;
+ /* For microMIPS instructions placed in a fixed-length branch delay slot
+ we make up to two passes over the relevant fragment of the opcode
+ table. First we try instructions that meet the delay slot's length
+ requirement. If none matched, then we retry with the remaining ones
+ and if one matches, then we use it and then issue an appropriate
+ warning later on. */
+ argsStart = s = str + end;
for (;;)
{
+ bfd_boolean delay_slot_ok;
+ bfd_boolean size_ok;
bfd_boolean ok;
- gas_assert (strcmp (insn->name, str) == 0);
+ gas_assert (strcmp (insn->name, name) == 0);
ok = is_opcode_valid (insn);
- if (! ok)
+ size_ok = is_size_valid (insn);
+ delay_slot_ok = is_delay_slot_valid (insn);
+ if (!delay_slot_ok && !wrong_delay_slot_insns)
{
- if (insn + 1 < &mips_opcodes[NUMOPCODES]
- && strcmp (insn->name, insn[1].name) == 0)
+ firstinsn = insn;
+ wrong_delay_slot_insns = TRUE;
+ }
+ if (!ok || !size_ok || delay_slot_ok != need_delay_slot_ok)
+ {
+ static char buf[256];
+
+ if (insn + 1 < past && strcmp (insn->name, insn[1].name) == 0)
{
++insn;
continue;
}
- else
+ if (wrong_delay_slot_insns && need_delay_slot_ok)
{
- if (!insn_error)
- {
- static char buf[100];
- sprintf (buf,
- _("opcode not supported on this processor: %s (%s)"),
- mips_cpu_info_from_arch (mips_opts.arch)->name,
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- insn_error = buf;
- }
- if (save_c)
- *(--s) = save_c;
- return;
+ gas_assert (firstinsn);
+ need_delay_slot_ok = FALSE;
+ past = insn + 1;
+ insn = firstinsn;
+ continue;
}
+
+ if (insn_error)
+ return;
+
+ if (!ok)
+ sprintf (buf, _("Opcode not supported on this processor: %s (%s)"),
+ mips_cpu_info_from_arch (mips_opts.arch)->name,
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ else
+ sprintf (buf, _("Unrecognized %u-bit version of microMIPS opcode"),
+ 8 * forced_insn_length);
+ insn_error = buf;
+
+ return;
}
create_insn (ip, insn);
return;
break;
- case '2': /* DSP 2-bit unsigned immediate in bit 11. */
+ case '2':
+ /* DSP 2-bit unsigned immediate in bit 11 (for standard MIPS
+ code) or 14 (for microMIPS code). */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number != 1
as_bad (_("BALIGN immediate not 1 or 3 (%lu)"),
(unsigned long) imm_expr.X_add_number);
}
- INSERT_OPERAND (BP, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ BP, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
- case '3': /* DSP 3-bit unsigned immediate in bit 21. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_SA3)
- {
- as_bad (_("DSP immediate not in range 0..%d (%lu)"),
- OP_MASK_SA3, (unsigned long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (SA3, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ case '3':
+ /* DSP 3-bit unsigned immediate in bit 13 (for standard MIPS
+ code) or 21 (for microMIPS code). */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_SA3 : OP_MASK_SA3);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ SA3, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
- case '4': /* DSP 4-bit unsigned immediate in bit 21. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_SA4)
- {
- as_bad (_("DSP immediate not in range 0..%d (%lu)"),
- OP_MASK_SA4, (unsigned long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (SA4, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ case '4':
+ /* DSP 4-bit unsigned immediate in bit 12 (for standard MIPS
+ code) or 21 (for microMIPS code). */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_SA4 : OP_MASK_SA4);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ SA4, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
- case '5': /* DSP 8-bit unsigned immediate in bit 16. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_IMM8)
- {
- as_bad (_("DSP immediate not in range 0..%d (%lu)"),
- OP_MASK_IMM8, (unsigned long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (IMM8, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ case '5':
+ /* DSP 8-bit unsigned immediate in bit 13 (for standard MIPS
+ code) or 16 (for microMIPS code). */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_IMM8 : OP_MASK_IMM8);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ IMM8, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
- case '6': /* DSP 5-bit unsigned immediate in bit 21. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_RS)
- {
- as_bad (_("DSP immediate not in range 0..%d (%lu)"),
- OP_MASK_RS, (unsigned long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (RS, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ case '6':
+ /* DSP 5-bit unsigned immediate in bit 16 (for standard MIPS
+ code) or 21 (for microMIPS code). */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_RS : OP_MASK_RS);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ RS, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
case '7': /* Four DSP accumulators in bits 11,12. */
- if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
- s[3] >= '0' && s[3] <= '3')
+ if (s[0] == '$' && s[1] == 'a' && s[2] == 'c'
+ && s[3] >= '0' && s[3] <= '3')
{
regno = s[3] - '0';
s += 4;
- INSERT_OPERAND (DSPACC, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, DSPACC, *ip, regno);
continue;
}
else
as_bad (_("Invalid dsp acc register"));
break;
- case '8': /* DSP 6-bit unsigned immediate in bit 11. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if (imm_expr.X_add_number & ~OP_MASK_WRDSP)
- {
- as_bad (_("DSP immediate not in range 0..%d (%lu)"),
- OP_MASK_WRDSP,
- (unsigned long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (WRDSP, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ case '8':
+ /* DSP 6-bit unsigned immediate in bit 11 (for standard MIPS
+ code) or 14 (for microMIPS code). */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_WRDSP
+ : OP_MASK_WRDSP);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_bad (_("DSP immediate not in range 0..%lu (%lu)"),
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ WRDSP, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
case '9': /* Four DSP accumulators in bits 21,22. */
- if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
- s[3] >= '0' && s[3] <= '3')
+ gas_assert (!mips_opts.micromips);
+ if (s[0] == '$' && s[1] == 'a' && s[2] == 'c'
+ && s[3] >= '0' && s[3] <= '3')
{
regno = s[3] - '0';
s += 4;
- INSERT_OPERAND (DSPACC_S, *ip, regno);
+ INSERT_OPERAND (0, DSPACC_S, *ip, regno);
continue;
}
else
as_bad (_("Invalid dsp acc register"));
break;
- case '0': /* DSP 6-bit signed immediate in bit 20. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((OP_MASK_DSPSFT + 1) >> 1);
- max_range = ((OP_MASK_DSPSFT + 1) >> 1) - 1;
- if (imm_expr.X_add_number < min_range ||
- imm_expr.X_add_number > max_range)
- {
+ case '0':
+ /* DSP 6-bit signed immediate in bit 16 (for standard MIPS
+ code) or 20 (for microMIPS code). */
+ {
+ long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_DSPSFT : OP_MASK_DSPSFT);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ min_range = -((mask + 1) >> 1);
+ max_range = ((mask + 1) >> 1) - 1;
+ if (imm_expr.X_add_number < min_range
+ || imm_expr.X_add_number > max_range)
as_bad (_("DSP immediate not in range %ld..%ld (%ld)"),
(long) min_range, (long) max_range,
(long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (DSPSFT, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ INSERT_OPERAND (mips_opts.micromips,
+ DSPSFT, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
case '\'': /* DSP 6-bit unsigned immediate in bit 16. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if (imm_expr.X_add_number & ~OP_MASK_RDDSP)
OP_MASK_RDDSP,
(unsigned long) imm_expr.X_add_number);
}
- INSERT_OPERAND (RDDSP, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, RDDSP, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case ':': /* DSP 7-bit signed immediate in bit 19. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
min_range = -((OP_MASK_DSPSFT_7 + 1) >> 1);
(long) min_range, (long) max_range,
(long) imm_expr.X_add_number);
}
- INSERT_OPERAND (DSPSFT_7, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, DSPSFT_7, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case '@': /* DSP 10-bit signed immediate in bit 16. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- min_range = -((OP_MASK_IMM10 + 1) >> 1);
- max_range = ((OP_MASK_IMM10 + 1) >> 1) - 1;
- if (imm_expr.X_add_number < min_range ||
- imm_expr.X_add_number > max_range)
- {
+ {
+ long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_IMM10 : OP_MASK_IMM10);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ min_range = -((mask + 1) >> 1);
+ max_range = ((mask + 1) >> 1) - 1;
+ if (imm_expr.X_add_number < min_range
+ || imm_expr.X_add_number > max_range)
as_bad (_("DSP immediate not in range %ld..%ld (%ld)"),
(long) min_range, (long) max_range,
(long) imm_expr.X_add_number);
- }
- INSERT_OPERAND (IMM10, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ IMM10, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
+ continue;
+
+ case '^': /* DSP 5-bit unsigned immediate in bit 11. */
+ gas_assert (mips_opts.micromips);
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~MICROMIPSOP_MASK_RD)
+ as_bad (_("DSP immediate not in range 0..%d (%lu)"),
+ MICROMIPSOP_MASK_RD,
+ (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (1, RD, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case '!': /* MT usermode flag bit. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if (imm_expr.X_add_number & ~OP_MASK_MT_U)
as_bad (_("MT usermode bit not 0 or 1 (%lu)"),
(unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (MT_U, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, MT_U, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case '$': /* MT load high flag bit. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if (imm_expr.X_add_number & ~OP_MASK_MT_H)
as_bad (_("MT load high bit not 0 or 1 (%lu)"),
(unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (MT_H, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, MT_H, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case '*': /* Four DSP accumulators in bits 18,19. */
+ gas_assert (!mips_opts.micromips);
if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
s[3] >= '0' && s[3] <= '3')
{
regno = s[3] - '0';
s += 4;
- INSERT_OPERAND (MTACC_T, *ip, regno);
+ INSERT_OPERAND (0, MTACC_T, *ip, regno);
continue;
}
else
break;
case '&': /* Four DSP accumulators in bits 13,14. */
+ gas_assert (!mips_opts.micromips);
if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
s[3] >= '0' && s[3] <= '3')
{
regno = s[3] - '0';
s += 4;
- INSERT_OPERAND (MTACC_D, *ip, regno);
+ INSERT_OPERAND (0, MTACC_D, *ip, regno);
continue;
}
else
as_bad (_("Invalid dsp/smartmips acc register"));
break;
+ case '\\': /* 3-bit bit position. */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_3BITPOS
+ : OP_MASK_3BITPOS);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_warn (_("Bit position for %s not in range 0..%lu (%lu)"),
+ ip->insn_mo->name,
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ 3BITPOS, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
+ continue;
+
case ',':
++argnum;
if (*s++ == *args)
{
case 'r':
case 'v':
- INSERT_OPERAND (RS, *ip, lastregno);
+ INSERT_OPERAND (mips_opts.micromips, RS, *ip, lastregno);
continue;
case 'w':
- INSERT_OPERAND (RT, *ip, lastregno);
+ INSERT_OPERAND (mips_opts.micromips, RT, *ip, lastregno);
continue;
case 'W':
- INSERT_OPERAND (FT, *ip, lastregno);
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, FT, *ip, lastregno);
continue;
case 'V':
- INSERT_OPERAND (FS, *ip, lastregno);
+ INSERT_OPERAND (mips_opts.micromips, FS, *ip, lastregno);
continue;
}
break;
we must have a left paren. */
/* This is dependent on the next operand specifier
is a base register specification. */
- gas_assert (args[1] == 'b');
- if (*s == '\0')
+ gas_assert (args[1] == 'b'
+ || (mips_opts.micromips
+ && args[1] == 'm'
+ && (args[2] == 'l' || args[2] == 'n'
+ || args[2] == 's' || args[2] == 'a')));
+ if (*s == '\0' && args[1] == 'b')
return;
+ /* Fall through. */
case ')': /* These must match exactly. */
- case '[':
+ if (*s++ == *args)
+ continue;
+ break;
+
+ case '[': /* These must match exactly. */
case ']':
+ gas_assert (!mips_opts.micromips);
if (*s++ == *args)
continue;
break;
case '2':
case '3':
case '4':
+ gas_assert (!mips_opts.micromips);
{
const struct mips_immed *imm = mips_immed;
while (imm->type && imm->type != *args)
++imm;
if (! imm->type)
- internalError ();
+ abort ();
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number & ~imm->mask)
}
continue;
+ case 'J': /* 10-bit hypcall code. */
+ gas_assert (!mips_opts.micromips);
+ {
+ unsigned long mask = OP_MASK_CODE10;
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_warn (_("Code for %s not in range 0..%lu (%lu)"),
+ ip->insn_mo->name,
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (0, CODE10, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
+ continue;
+
case 'A': /* ins/ext position, becomes LSB. */
limlo = 0;
limhi = 31;
imm_expr.X_add_number = limlo;
}
lastpos = imm_expr.X_add_number;
- INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ EXTLSB, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
(unsigned long) lastpos);
imm_expr.X_add_number = limlo - lastpos;
}
- INSERT_OPERAND (INSMSB, *ip,
- lastpos + imm_expr.X_add_number - 1);
+ INSERT_OPERAND (mips_opts.micromips, INSMSB, *ip,
+ lastpos + imm_expr.X_add_number - 1);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'C': /* ext size, becomes MSBD. */
limlo = 1;
limhi = 32;
+ sizelo = 1;
goto do_msbd;
case 'G':
limlo = 33;
limhi = 64;
+ sizelo = 33;
goto do_msbd;
case 'H':
limlo = 33;
limhi = 64;
+ sizelo = 1;
goto do_msbd;
do_msbd:
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
- /* Check for negative input so that small negative numbers
- will not succeed incorrectly. The checks against
- (pos+size) transitively check "size" itself,
- assuming that "pos" is reasonable. */
- if ((long) imm_expr.X_add_number < 0
+ /* The checks against (pos+size) don't transitively check
+ "size" itself, assuming that "pos" is reasonable.
+ We also need to check the lower bound of "size". */
+ if ((long) imm_expr.X_add_number < sizelo
|| ((unsigned long) imm_expr.X_add_number
+ lastpos) < limlo
|| ((unsigned long) imm_expr.X_add_number
(unsigned long) lastpos);
imm_expr.X_add_number = limlo - lastpos;
}
- INSERT_OPERAND (EXTMSBD, *ip, imm_expr.X_add_number - 1);
+ INSERT_OPERAND (mips_opts.micromips,
+ EXTMSBD, *ip, imm_expr.X_add_number - 1);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
continue;
case 'T': /* Coprocessor register. */
+ gas_assert (!mips_opts.micromips);
/* +T is for disassembly only; never match. */
break;
case 't': /* Coprocessor register number. */
+ gas_assert (!mips_opts.micromips);
if (s[0] == '$' && ISDIGIT (s[1]))
{
++s;
as_bad (_("Invalid register number (%d)"), regno);
else
{
- INSERT_OPERAND (RT, *ip, regno);
+ INSERT_OPERAND (0, RT, *ip, regno);
continue;
}
}
case 'x':
/* bbit[01] and bbit[01]32 bit index. Give error if index
is not in the valid range. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number > 31)
(unsigned long) imm_expr.X_add_number);
imm_expr.X_add_number = 0;
}
- INSERT_OPERAND (BBITIND, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, BBITIND, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
/* bbit[01] bit index when bbit is used but we generate
bbit[01]32 because the index is over 32. Move to the
next candidate if index is not in the valid range. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number < 32
|| (unsigned) imm_expr.X_add_number > 63)
break;
- INSERT_OPERAND (BBITIND, *ip, imm_expr.X_add_number - 32);
+ INSERT_OPERAND (0, BBITIND, *ip, imm_expr.X_add_number - 32);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'p':
/* cins, cins32, exts and exts32 position field. Give error
if it's not in the valid range. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number > 31)
}
/* Make the pos explicit to simplify +S. */
lastpos = imm_expr.X_add_number + 32;
- INSERT_OPERAND (CINSPOS, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, CINSPOS, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'P':
/* cins, cins32, exts and exts32 position field. Move to
the next candidate if it's not in the valid range. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number < 32
|| (unsigned) imm_expr.X_add_number > 63)
break;
lastpos = imm_expr.X_add_number;
- INSERT_OPERAND (CINSPOS, *ip, imm_expr.X_add_number - 32);
+ INSERT_OPERAND (0, CINSPOS, *ip, imm_expr.X_add_number - 32);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 's':
/* cins and exts length-minus-one field. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
(unsigned long) imm_expr.X_add_number);
imm_expr.X_add_number = 0;
}
- INSERT_OPERAND (CINSLM1, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, CINSLM1, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'S':
/* cins32/exts32 and cins/exts aliasing cint32/exts32
length-minus-one field. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((long) imm_expr.X_add_number < 0
(unsigned long) imm_expr.X_add_number);
imm_expr.X_add_number = 0;
}
- INSERT_OPERAND (CINSLM1, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, CINSLM1, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'Q':
/* seqi/snei immediate field. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((long) imm_expr.X_add_number < -512
(long) imm_expr.X_add_number);
imm_expr.X_add_number = 0;
}
- INSERT_OPERAND (SEQI, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, SEQI, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'a': /* 8-bit signed offset in bit 6 */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
min_range = -((OP_MASK_OFFSET_A + 1) >> 1);
(long) min_range, (long) max_range,
(long) imm_expr.X_add_number);
}
- INSERT_OPERAND (OFFSET_A, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, OFFSET_A, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'b': /* 8-bit signed offset in bit 3 */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
min_range = -((OP_MASK_OFFSET_B + 1) >> 1);
(long) min_range, (long) max_range,
(long) imm_expr.X_add_number);
}
- INSERT_OPERAND (OFFSET_B, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, OFFSET_B, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'c': /* 9-bit signed offset in bit 6 */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
min_range = -((OP_MASK_OFFSET_C + 1) >> 1);
(long) imm_expr.X_add_number);
}
/* Right shift 4 bits to adjust the offset operand. */
- INSERT_OPERAND (OFFSET_C, *ip, imm_expr.X_add_number >> 4);
+ INSERT_OPERAND (0, OFFSET_C, *ip,
+ imm_expr.X_add_number >> 4);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'z':
+ gas_assert (!mips_opts.micromips);
if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no))
break;
if (regno == AT && mips_opts.at)
as_warn (_("used $%u with \".set at=$%u\""),
regno, mips_opts.at);
}
- INSERT_OPERAND (RZ, *ip, regno);
+ INSERT_OPERAND (0, RZ, *ip, regno);
continue;
case 'Z':
+ gas_assert (!mips_opts.micromips);
if (!reg_lookup (&s, RTYPE_FPU, ®no))
break;
- INSERT_OPERAND (FZ, *ip, regno);
+ INSERT_OPERAND (0, FZ, *ip, regno);
+ continue;
+
+ case 'j':
+ {
+ int shift = 8;
+ size_t i;
+ /* Check whether there is only a single bracketed expression
+ left. If so, it must be the base register and the
+ constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ continue;
+
+ /* If this value won't fit into the offset, then go find
+ a macro that will generate a 16- or 32-bit offset code
+ pattern. */
+ i = my_getSmallExpression (&imm_expr, imm_reloc, s);
+ if ((i == 0 && (imm_expr.X_op != O_constant
+ || imm_expr.X_add_number >= 1 << shift
+ || imm_expr.X_add_number < -1 << shift))
+ || i > 0)
+ {
+ imm_expr.X_op = O_absent;
+ break;
+ }
+ INSERT_OPERAND (mips_opts.micromips, EVAOFFSET, *ip,
+ imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
default:
- as_bad (_("Internal error: bad mips opcode "
+ as_bad (_("Internal error: bad %s opcode "
"(unknown extension operand type `+%c'): %s %s"),
+ mips_opts.micromips ? "microMIPS" : "MIPS",
*args, insn->name, insn->args);
/* Further processing is fruitless. */
return;
}
break;
+ case '.': /* 10-bit offset. */
+ gas_assert (mips_opts.micromips);
+ case '~': /* 12-bit offset. */
+ {
+ int shift = *args == '.' ? 9 : 11;
+ size_t i;
+
+ /* Check whether there is only a single bracketed expression
+ left. If so, it must be the base register and the
+ constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ continue;
+
+ /* If this value won't fit into the offset, then go find
+ a macro that will generate a 16- or 32-bit offset code
+ pattern. */
+ i = my_getSmallExpression (&imm_expr, imm_reloc, s);
+ if ((i == 0 && (imm_expr.X_op != O_constant
+ || imm_expr.X_add_number >= 1 << shift
+ || imm_expr.X_add_number < -1 << shift))
+ || i > 0)
+ {
+ imm_expr.X_op = O_absent;
+ break;
+ }
+ if (shift == 9)
+ INSERT_OPERAND (1, OFFSET10, *ip, imm_expr.X_add_number);
+ else
+ INSERT_OPERAND (mips_opts.micromips,
+ OFFSET12, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
+ continue;
+
case '<': /* must be at least one digit */
/*
* According to the manual, if the shift amount is greater
if ((unsigned long) imm_expr.X_add_number > 31)
as_warn (_("Improper shift amount (%lu)"),
(unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ SHAMT, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
if ((unsigned long) imm_expr.X_add_number < 32
|| (unsigned long) imm_expr.X_add_number > 63)
break;
- INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number - 32);
+ INSERT_OPERAND (mips_opts.micromips,
+ SHAMT, *ip, imm_expr.X_add_number - 32);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
as_warn (_("Invalid value for `%s' (%lu)"),
ip->insn_mo->name,
(unsigned long) imm_expr.X_add_number);
- if (*args == 'k')
+ switch (*args)
{
- if (mips_fix_cn63xxp1 && strcmp ("pref", insn->name) == 0)
+ case 'k':
+ if (mips_fix_cn63xxp1
+ && !mips_opts.micromips
+ && strcmp ("pref", insn->name) == 0)
switch (imm_expr.X_add_number)
{
case 5:
imm_expr.X_add_number = 28;
break;
}
- INSERT_OPERAND (CACHE, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ CACHE, *ip, imm_expr.X_add_number);
+ break;
+ case 'h':
+ INSERT_OPERAND (mips_opts.micromips,
+ PREFX, *ip, imm_expr.X_add_number);
+ break;
+ case '1':
+ INSERT_OPERAND (mips_opts.micromips,
+ STYPE, *ip, imm_expr.X_add_number);
+ break;
}
- else if (*args == 'h')
- INSERT_OPERAND (PREFX, *ip, imm_expr.X_add_number);
- else
- INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'c': /* BREAK code. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > OP_MASK_CODE)
- as_warn (_("Code for %s not in range 0..1023 (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (CODE, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_CODE
+ : OP_MASK_CODE);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_warn (_("Code for %s not in range 0..%lu (%lu)"),
+ ip->insn_mo->name,
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ CODE, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
case 'q': /* Lower BREAK code. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > OP_MASK_CODE2)
- as_warn (_("Lower code for %s not in range 0..1023 (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (CODE2, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_CODE2
+ : OP_MASK_CODE2);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_warn (_("Lower code for %s not in range 0..%lu (%lu)"),
+ ip->insn_mo->name,
+ mask, (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (mips_opts.micromips,
+ CODE2, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
- case 'B': /* 20-bit SYSCALL/BREAK code. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > OP_MASK_CODE20)
- as_warn (_("Code for %s not in range 0..1048575 (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (CODE20, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ case 'B': /* 20- or 10-bit syscall/break/wait code. */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_CODE10
+ : OP_MASK_CODE20);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_warn (_("Code for %s not in range 0..%lu (%lu)"),
+ ip->insn_mo->name,
+ mask, (unsigned long) imm_expr.X_add_number);
+ if (mips_opts.micromips)
+ INSERT_OPERAND (1, CODE10, *ip, imm_expr.X_add_number);
+ else
+ INSERT_OPERAND (0, CODE20, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
- case 'C': /* Coprocessor code. */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > OP_MASK_COPZ)
- {
- as_warn (_("Coproccesor code > 25 bits (%lu)"),
+ case 'C': /* 25- or 23-bit coprocessor code. */
+ {
+ unsigned long mask = (mips_opts.micromips
+ ? MICROMIPSOP_MASK_COPZ
+ : OP_MASK_COPZ);
+
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > mask)
+ as_warn (_("Coproccesor code > %u bits (%lu)"),
+ mips_opts.micromips ? 23U : 25U,
(unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_COPZ;
- }
- INSERT_OPERAND (COPZ, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ INSERT_OPERAND (mips_opts.micromips,
+ COPZ, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
continue;
- case 'J': /* 19-bit WAIT code. */
+ case 'J': /* 19-bit WAIT code. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > OP_MASK_CODE19)
- {
- as_warn (_("Illegal 19-bit code (%lu)"),
+ {
+ as_warn (_("Illegal 19-bit code (%lu)"),
(unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_CODE19;
- }
- INSERT_OPERAND (CODE19, *ip, imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_CODE19;
+ }
+ INSERT_OPERAND (0, CODE19, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'P': /* Performance register. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if (imm_expr.X_add_number != 0 && imm_expr.X_add_number != 1)
as_warn (_("Invalid performance register (%lu)"),
(unsigned long) imm_expr.X_add_number);
- INSERT_OPERAND (PERFREG, *ip, imm_expr.X_add_number);
+ if (imm_expr.X_add_number != 0 && mips_opts.arch == CPU_R5900
+ && (!strcmp(insn->name,"mfps") || !strcmp(insn->name,"mtps")))
+ as_warn (_("Invalid performance register (%lu)"),
+ (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (0, PERFREG, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'G': /* Coprocessor destination register. */
- if (((ip->insn_opcode >> OP_SH_OP) & OP_MASK_OP) == OP_OP_COP0)
- ok = reg_lookup (&s, RTYPE_NUM | RTYPE_CP0, ®no);
- else
- ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no);
- INSERT_OPERAND (RD, *ip, regno);
- if (ok)
- {
- lastregno = regno;
- continue;
- }
- else
- break;
+ {
+ unsigned long opcode = ip->insn_opcode;
+ unsigned long mask;
+ unsigned int types;
+ int cop0;
+
+ if (mips_opts.micromips)
+ {
+ mask = ~((MICROMIPSOP_MASK_RT << MICROMIPSOP_SH_RT)
+ | (MICROMIPSOP_MASK_RS << MICROMIPSOP_SH_RS)
+ | (MICROMIPSOP_MASK_SEL << MICROMIPSOP_SH_SEL));
+ opcode &= mask;
+ switch (opcode)
+ {
+ case 0x000000fc: /* mfc0 */
+ case 0x000002fc: /* mtc0 */
+ case 0x580000fc: /* dmfc0 */
+ case 0x580002fc: /* dmtc0 */
+ cop0 = 1;
+ break;
+ default:
+ cop0 = 0;
+ break;
+ }
+ }
+ else
+ {
+ opcode = (opcode >> OP_SH_OP) & OP_MASK_OP;
+ cop0 = opcode == OP_OP_COP0;
+ }
+ types = RTYPE_NUM | (cop0 ? RTYPE_CP0 : RTYPE_GP);
+ ok = reg_lookup (&s, types, ®no);
+ if (mips_opts.micromips)
+ INSERT_OPERAND (1, RS, *ip, regno);
+ else
+ INSERT_OPERAND (0, RD, *ip, regno);
+ if (ok)
+ {
+ lastregno = regno;
+ continue;
+ }
+ }
+ break;
+ case 'y': /* ALNV.PS source register. */
+ gas_assert (mips_opts.micromips);
+ goto do_reg;
+ case 'x': /* Ignore register name. */
+ case 'U': /* Destination register (CLO/CLZ). */
+ case 'g': /* Coprocessor destination register. */
+ gas_assert (!mips_opts.micromips);
case 'b': /* Base register. */
case 'd': /* Destination register. */
case 's': /* Source register. */
case 'w': /* Both dest and target. */
case 'E': /* Coprocessor target register. */
case 'K': /* RDHWR destination register. */
- case 'x': /* Ignore register name. */
case 'z': /* Must be zero register. */
- case 'U': /* Destination register (CLO/CLZ). */
- case 'g': /* Coprocessor destination register. */
+ do_reg:
s_reset = s;
if (*args == 'E' || *args == 'K')
ok = reg_lookup (&s, RTYPE_NUM, ®no);
case 's':
case 'v':
case 'b':
- INSERT_OPERAND (RS, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, RS, *ip, regno);
break;
- case 'd':
+
case 'K':
+ if (mips_opts.micromips)
+ INSERT_OPERAND (1, RS, *ip, regno);
+ else
+ INSERT_OPERAND (0, RD, *ip, regno);
+ break;
+
+ case 'd':
case 'g':
- INSERT_OPERAND (RD, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, RD, *ip, regno);
break;
+
case 'U':
- INSERT_OPERAND (RD, *ip, regno);
- INSERT_OPERAND (RT, *ip, regno);
+ gas_assert (!mips_opts.micromips);
+ INSERT_OPERAND (0, RD, *ip, regno);
+ INSERT_OPERAND (0, RT, *ip, regno);
break;
+
case 'w':
case 't':
case 'E':
- INSERT_OPERAND (RT, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, RT, *ip, regno);
break;
+
+ case 'y':
+ gas_assert (mips_opts.micromips);
+ INSERT_OPERAND (1, RS3, *ip, regno);
+ break;
+
case 'x':
/* This case exists because on the r3000 trunc
expands into a macro which requires a gp
is MIPS_ISA2 and uses 'x', and the macro
version is MIPS_ISA1 and uses 't'. */
break;
+
case 'z':
/* This case is for the div instruction, which
acts differently if the destination argument
{
case 'r':
case 'v':
- INSERT_OPERAND (RS, *ip, lastregno);
+ INSERT_OPERAND (mips_opts.micromips, RS, *ip, lastregno);
continue;
+
case 'w':
- INSERT_OPERAND (RT, *ip, lastregno);
+ INSERT_OPERAND (mips_opts.micromips, RT, *ip, lastregno);
continue;
}
break;
case 'O': /* MDMX alignment immediate constant. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > OP_MASK_ALN)
as_warn (_("Improper align amount (%ld), using low bits"),
(long) imm_expr.X_add_number);
- INSERT_OPERAND (ALN, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, ALN, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
if (s[0] != '$')
{
/* MDMX Immediate. */
+ gas_assert (!mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > OP_MASK_FT)
as_warn (_("Invalid MDMX Immediate (%ld)"),
(long) imm_expr.X_add_number);
- INSERT_OPERAND (FT, *ip, imm_expr.X_add_number);
+ INSERT_OPERAND (0, FT, *ip, imm_expr.X_add_number);
if (ip->insn_opcode & (OP_MASK_VSEL << OP_SH_VSEL))
ip->insn_opcode |= MDMX_FMTSEL_IMM_QH << OP_SH_VSEL;
else
case 'Y': /* MDMX source register. */
case 'Z': /* MDMX target register. */
is_mdmx = 1;
+ case 'W':
+ gas_assert (!mips_opts.micromips);
case 'D': /* Floating point destination register. */
case 'S': /* Floating point source register. */
case 'T': /* Floating point target register. */
case 'R': /* Floating point source register. */
case 'V':
- case 'W':
rtype = RTYPE_FPU;
if (is_mdmx
- || (mips_opts.ase_mdmx
+ || ((mips_opts.ase & ASE_MDMX)
&& (ip->insn_mo->pinfo & FP_D)
&& (ip->insn_mo->pinfo & (INSN_COPROC_MOVE_DELAY
| INSN_COPROC_MEMORY_DELAY
{
case 'D':
case 'X':
- INSERT_OPERAND (FD, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, FD, *ip, regno);
break;
+
case 'V':
case 'S':
case 'Y':
- INSERT_OPERAND (FS, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, FS, *ip, regno);
break;
+
case 'Q':
/* This is like 'Z', but also needs to fix the MDMX
vector/scalar select bits. Note that the
case 'W':
case 'T':
case 'Z':
- INSERT_OPERAND (FT, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, FT, *ip, regno);
break;
+
case 'R':
- INSERT_OPERAND (FR, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, FR, *ip, regno);
break;
}
lastregno = regno;
switch (*args++)
{
case 'V':
- INSERT_OPERAND (FS, *ip, lastregno);
+ INSERT_OPERAND (mips_opts.micromips, FS, *ip, lastregno);
continue;
+
case 'W':
- INSERT_OPERAND (FT, *ip, lastregno);
+ INSERT_OPERAND (mips_opts.micromips, FT, *ip, lastregno);
continue;
}
break;
int more;
offsetT minval, maxval;
- more = (insn + 1 < &mips_opcodes[NUMOPCODES]
+ more = (insn + 1 < past
&& strcmp (insn->name, insn[1].name) == 0);
/* If the expression was written as an unsigned number,
continue;
case 'u': /* Upper 16 bits. */
+ *imm_reloc = BFD_RELOC_LO16;
if (my_getSmallExpression (&imm_expr, imm_reloc, s) == 0
&& imm_expr.X_op == O_constant
&& (imm_expr.X_add_number < 0
continue;
case 'a': /* 26-bit address. */
+ *offset_reloc = BFD_RELOC_MIPS_JMP;
my_getExpression (&offset_expr, s);
s = expr_end;
- *offset_reloc = BFD_RELOC_MIPS_JMP;
continue;
case 'N': /* 3-bit branch condition code. */
"was %d"),
str, regno);
if (*args == 'N')
- INSERT_OPERAND (BCC, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, BCC, *ip, regno);
else
- INSERT_OPERAND (CCC, *ip, regno);
+ INSERT_OPERAND (mips_opts.micromips, CCC, *ip, regno);
continue;
case 'H':
if (c > 7)
as_bad (_("Invalid coprocessor sub-selection value (0-7)"));
- ip->insn_opcode |= c;
+ INSERT_OPERAND (mips_opts.micromips, SEL, *ip, c);
continue;
case 'e':
+ gas_assert (!mips_opts.micromips);
/* Must be at least one digit. */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
imm_expr.X_add_number = 0;
}
- INSERT_OPERAND (VECBYTE, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
+ INSERT_OPERAND (0, VECBYTE, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '%':
+ gas_assert (!mips_opts.micromips);
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+
+ if ((unsigned long) imm_expr.X_add_number
+ > (unsigned long) OP_MASK_VECALIGN)
+ {
+ as_bad (_("bad byte vector index (%ld)"),
+ (long) imm_expr.X_add_number);
+ imm_expr.X_add_number = 0;
+ }
+
+ INSERT_OPERAND (0, VECALIGN, *ip, imm_expr.X_add_number);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case 'm': /* Opcode extension character. */
+ gas_assert (mips_opts.micromips);
+ c = *++args;
+ switch (c)
+ {
+ case 'r':
+ if (strncmp (s, "$pc", 3) == 0)
+ {
+ s += 3;
+ continue;
+ }
+ break;
+
+ case 'a':
+ case 'b':
+ case 'c':
+ case 'd':
+ case 'e':
+ case 'f':
+ case 'g':
+ case 'h':
+ case 'i':
+ case 'j':
+ case 'l':
+ case 'm':
+ case 'n':
+ case 'p':
+ case 'q':
+ case 's':
+ case 't':
+ case 'x':
+ case 'y':
+ case 'z':
+ s_reset = s;
+ ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no);
+ if (regno == AT && mips_opts.at)
+ {
+ if (mips_opts.at == ATREG)
+ as_warn (_("Used $at without \".set noat\""));
+ else
+ as_warn (_("Used $%u with \".set at=$%u\""),
+ regno, mips_opts.at);
+ }
+ if (!ok)
+ {
+ if (c == 'c')
+ {
+ gas_assert (args[1] == ',');
+ regno = lastregno;
+ ++args;
+ }
+ else if (c == 't')
+ {
+ gas_assert (args[1] == ',');
+ ++args;
+ continue; /* Nothing to do. */
+ }
+ else
+ break;
+ }
+
+ if (c == 'j' && !strncmp (ip->insn_mo->name, "jalr", 4))
+ {
+ if (regno == lastregno)
+ {
+ insn_error
+ = _("Source and destination must be different");
+ continue;
+ }
+ if (regno == 31 && lastregno == 0xffffffff)
+ {
+ insn_error
+ = _("A destination register must be supplied");
+ continue;
+ }
+ }
+
+ if (*s == ' ')
+ ++s;
+ if (args[1] != *s)
+ {
+ if (c == 'e')
+ {
+ gas_assert (args[1] == ',');
+ regno = lastregno;
+ s = s_reset;
+ ++args;
+ }
+ else if (c == 't')
+ {
+ gas_assert (args[1] == ',');
+ s = s_reset;
+ ++args;
+ continue; /* Nothing to do. */
+ }
+ }
+
+ /* Make sure regno is the same as lastregno. */
+ if (c == 't' && regno != lastregno)
+ break;
+
+ /* Make sure regno is the same as destregno. */
+ if (c == 'x' && regno != destregno)
+ break;
+
+ /* We need to save regno, before regno maps to the
+ microMIPS register encoding. */
+ lastregno = regno;
+
+ if (c == 'f')
+ destregno = regno;
+
+ switch (c)
+ {
+ case 'a':
+ if (regno != GP)
+ regno = ILLEGAL_REG;
+ break;
+
+ case 'b':
+ regno = mips32_to_micromips_reg_b_map[regno];
+ break;
+
+ case 'c':
+ regno = mips32_to_micromips_reg_c_map[regno];
+ break;
+
+ case 'd':
+ regno = mips32_to_micromips_reg_d_map[regno];
+ break;
+
+ case 'e':
+ regno = mips32_to_micromips_reg_e_map[regno];
+ break;
+
+ case 'f':
+ regno = mips32_to_micromips_reg_f_map[regno];
+ break;
+
+ case 'g':
+ regno = mips32_to_micromips_reg_g_map[regno];
+ break;
+
+ case 'h':
+ regno = mips32_to_micromips_reg_h_map[regno];
+ break;
+
+ case 'i':
+ switch (EXTRACT_OPERAND (1, MI, *ip))
+ {
+ case 4:
+ if (regno == 21)
+ regno = 3;
+ else if (regno == 22)
+ regno = 4;
+ else if (regno == 5)
+ regno = 5;
+ else if (regno == 6)
+ regno = 6;
+ else if (regno == 7)
+ regno = 7;
+ else
+ regno = ILLEGAL_REG;
+ break;
+
+ case 5:
+ if (regno == 6)
+ regno = 0;
+ else if (regno == 7)
+ regno = 1;
+ else
+ regno = ILLEGAL_REG;
+ break;
+
+ case 6:
+ if (regno == 7)
+ regno = 2;
+ else
+ regno = ILLEGAL_REG;
+ break;
+
+ default:
+ regno = ILLEGAL_REG;
+ break;
+ }
+ break;
+
+ case 'l':
+ regno = mips32_to_micromips_reg_l_map[regno];
+ break;
+
+ case 'm':
+ regno = mips32_to_micromips_reg_m_map[regno];
+ break;
+
+ case 'n':
+ regno = mips32_to_micromips_reg_n_map[regno];
+ break;
+
+ case 'q':
+ regno = mips32_to_micromips_reg_q_map[regno];
+ break;
+
+ case 's':
+ if (regno != SP)
+ regno = ILLEGAL_REG;
+ break;
+
+ case 'y':
+ if (regno != 31)
+ regno = ILLEGAL_REG;
+ break;
+
+ case 'z':
+ if (regno != ZERO)
+ regno = ILLEGAL_REG;
+ break;
+
+ case 'j': /* Do nothing. */
+ case 'p':
+ case 't':
+ case 'x':
+ break;
+
+ default:
+ abort ();
+ }
+
+ if (regno == ILLEGAL_REG)
+ break;
+
+ switch (c)
+ {
+ case 'b':
+ INSERT_OPERAND (1, MB, *ip, regno);
+ break;
+
+ case 'c':
+ INSERT_OPERAND (1, MC, *ip, regno);
+ break;
+
+ case 'd':
+ INSERT_OPERAND (1, MD, *ip, regno);
+ break;
+
+ case 'e':
+ INSERT_OPERAND (1, ME, *ip, regno);
+ break;
+
+ case 'f':
+ INSERT_OPERAND (1, MF, *ip, regno);
+ break;
+
+ case 'g':
+ INSERT_OPERAND (1, MG, *ip, regno);
+ break;
+
+ case 'h':
+ INSERT_OPERAND (1, MH, *ip, regno);
+ break;
+
+ case 'i':
+ INSERT_OPERAND (1, MI, *ip, regno);
+ break;
+
+ case 'j':
+ INSERT_OPERAND (1, MJ, *ip, regno);
+ break;
+
+ case 'l':
+ INSERT_OPERAND (1, ML, *ip, regno);
+ break;
+
+ case 'm':
+ INSERT_OPERAND (1, MM, *ip, regno);
+ break;
+
+ case 'n':
+ INSERT_OPERAND (1, MN, *ip, regno);
+ break;
+
+ case 'p':
+ INSERT_OPERAND (1, MP, *ip, regno);
+ break;
+
+ case 'q':
+ INSERT_OPERAND (1, MQ, *ip, regno);
+ break;
+
+ case 'a': /* Do nothing. */
+ case 's': /* Do nothing. */
+ case 't': /* Do nothing. */
+ case 'x': /* Do nothing. */
+ case 'y': /* Do nothing. */
+ case 'z': /* Do nothing. */
+ break;
+
+ default:
+ abort ();
+ }
+ continue;
+
+ case 'A':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ /* Check whether there is only a single bracketed
+ expression left. If so, it must be the base register
+ and the constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ {
+ INSERT_OPERAND (1, IMMA, *ip, 0);
+ continue;
+ }
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, -64, 64, 2))
+ break;
+
+ imm = ep.X_add_number >> 2;
+ INSERT_OPERAND (1, IMMA, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'B':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || ep.X_op != O_constant)
+ break;
+
+ for (imm = 0; imm < 8; imm++)
+ if (micromips_imm_b_map[imm] == ep.X_add_number)
+ break;
+ if (imm >= 8)
+ break;
+
+ INSERT_OPERAND (1, IMMB, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'C':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || ep.X_op != O_constant)
+ break;
+
+ for (imm = 0; imm < 16; imm++)
+ if (micromips_imm_c_map[imm] == ep.X_add_number)
+ break;
+ if (imm >= 16)
+ break;
+
+ INSERT_OPERAND (1, IMMC, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'D': /* pc relative offset */
+ case 'E': /* pc relative offset */
+ my_getExpression (&offset_expr, s);
+ if (offset_expr.X_op == O_register)
+ break;
+
+ if (!forced_insn_length)
+ *offset_reloc = (int) BFD_RELOC_UNUSED + c;
+ else if (c == 'D')
+ *offset_reloc = BFD_RELOC_MICROMIPS_10_PCREL_S1;
+ else
+ *offset_reloc = BFD_RELOC_MICROMIPS_7_PCREL_S1;
+ s = expr_end;
+ continue;
+
+ case 'F':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 16, 0))
+ break;
+
+ imm = ep.X_add_number;
+ INSERT_OPERAND (1, IMMF, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'G':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ /* Check whether there is only a single bracketed
+ expression left. If so, it must be the base register
+ and the constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ {
+ INSERT_OPERAND (1, IMMG, *ip, 0);
+ continue;
+ }
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, -1, 15, 0))
+ break;
+
+ imm = ep.X_add_number & 15;
+ INSERT_OPERAND (1, IMMG, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'H':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ /* Check whether there is only a single bracketed
+ expression left. If so, it must be the base register
+ and the constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ {
+ INSERT_OPERAND (1, IMMH, *ip, 0);
+ continue;
+ }
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 16, 1))
+ break;
+
+ imm = ep.X_add_number >> 1;
+ INSERT_OPERAND (1, IMMH, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'I':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, -1, 127, 0))
+ break;
+
+ imm = ep.X_add_number & 127;
+ INSERT_OPERAND (1, IMMI, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'J':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ /* Check whether there is only a single bracketed
+ expression left. If so, it must be the base register
+ and the constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ {
+ INSERT_OPERAND (1, IMMJ, *ip, 0);
+ continue;
+ }
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 16, 2))
+ break;
+
+ imm = ep.X_add_number >> 2;
+ INSERT_OPERAND (1, IMMJ, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'L':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ /* Check whether there is only a single bracketed
+ expression left. If so, it must be the base register
+ and the constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ {
+ INSERT_OPERAND (1, IMML, *ip, 0);
+ continue;
+ }
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 16, 0))
+ break;
+
+ imm = ep.X_add_number;
+ INSERT_OPERAND (1, IMML, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'M':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 1, 9, 0))
+ break;
+
+ imm = ep.X_add_number & 7;
+ INSERT_OPERAND (1, IMMM, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'N': /* Register list for lwm and swm. */
+ {
+ /* A comma-separated list of registers and/or
+ dash-separated contiguous ranges including
+ both ra and a set of one or more registers
+ starting at s0 up to s3 which have to be
+ consecutive, e.g.:
+
+ s0, ra
+ s0, s1, ra, s2, s3
+ s0-s2, ra
+
+ and any permutations of these. */
+ unsigned int reglist;
+ int imm;
+
+ if (!reglist_lookup (&s, RTYPE_NUM | RTYPE_GP, ®list))
+ break;
+
+ if ((reglist & 0xfff1ffff) != 0x80010000)
+ break;
+
+ reglist = (reglist >> 17) & 7;
+ reglist += 1;
+ if ((reglist & -reglist) != reglist)
+ break;
+
+ imm = ffs (reglist) - 1;
+ INSERT_OPERAND (1, IMMN, *ip, imm);
+ }
+ continue;
+
+ case 'O': /* sdbbp 4-bit code. */
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 16, 0))
+ break;
+
+ imm = ep.X_add_number;
+ INSERT_OPERAND (1, IMMO, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'P':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 32, 2))
+ break;
+
+ imm = ep.X_add_number >> 2;
+ INSERT_OPERAND (1, IMMP, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'Q':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, -0x400000, 0x400000, 2))
+ break;
+
+ imm = ep.X_add_number >> 2;
+ INSERT_OPERAND (1, IMMQ, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'U':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ /* Check whether there is only a single bracketed
+ expression left. If so, it must be the base register
+ and the constant must be zero. */
+ if (*s == '(' && strchr (s + 1, '(') == 0)
+ {
+ INSERT_OPERAND (1, IMMU, *ip, 0);
+ continue;
+ }
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 32, 2))
+ break;
+
+ imm = ep.X_add_number >> 2;
+ INSERT_OPERAND (1, IMMU, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'W':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 64, 2))
+ break;
+
+ imm = ep.X_add_number >> 2;
+ INSERT_OPERAND (1, IMMW, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'X':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, -8, 8, 0))
+ break;
+
+ imm = ep.X_add_number;
+ INSERT_OPERAND (1, IMMX, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'Y':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+ int imm;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || expr_const_in_range (&ep, -2, 2, 2)
+ || !expr_const_in_range (&ep, -258, 258, 2))
+ break;
+
+ imm = ep.X_add_number >> 2;
+ imm = ((imm >> 1) & ~0xff) | (imm & 0xff);
+ INSERT_OPERAND (1, IMMY, *ip, imm);
+ }
+ s = expr_end;
+ continue;
+
+ case 'Z':
+ {
+ bfd_reloc_code_real_type r[3];
+ expressionS ep;
+
+ if (my_getSmallExpression (&ep, r, s) > 0
+ || !expr_const_in_range (&ep, 0, 1, 0))
+ break;
+ }
+ s = expr_end;
+ continue;
+
+ default:
+ as_bad (_("Internal error: bad microMIPS opcode "
+ "(unknown extension operand type `m%c'): %s %s"),
+ *args, insn->name, insn->args);
+ /* Further processing is fruitless. */
+ return;
+ }
+ break;
+
+ case 'n': /* Register list for 32-bit lwm and swm. */
+ gas_assert (mips_opts.micromips);
+ {
+ /* A comma-separated list of registers and/or
+ dash-separated contiguous ranges including
+ at least one of ra and a set of one or more
+ registers starting at s0 up to s7 and then
+ s8 which have to be consecutive, e.g.:
+
+ ra
+ s0
+ ra, s0, s1, s2
+ s0-s8
+ s0-s5, ra
+
+ and any permutations of these. */
+ unsigned int reglist;
+ int imm;
+ int ra;
+
+ if (!reglist_lookup (&s, RTYPE_NUM | RTYPE_GP, ®list))
+ break;
+
+ if ((reglist & 0x3f00ffff) != 0)
+ break;
+
+ ra = (reglist >> 27) & 0x10;
+ reglist = ((reglist >> 22) & 0x100) | ((reglist >> 16) & 0xff);
+ reglist += 1;
+ if ((reglist & -reglist) != reglist)
+ break;
+
+ imm = (ffs (reglist) - 1) | ra;
+ INSERT_OPERAND (1, RT, *ip, imm);
+ imm_expr.X_op = O_absent;
+ }
continue;
- case '%':
+ case '|': /* 4-bit trap code. */
+ gas_assert (mips_opts.micromips);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
-
if ((unsigned long) imm_expr.X_add_number
- > (unsigned long) OP_MASK_VECALIGN)
- {
- as_bad (_("bad byte vector index (%ld)"),
- (long) imm_expr.X_add_number);
- imm_expr.X_add_number = 0;
- }
-
- INSERT_OPERAND (VECALIGN, *ip, imm_expr.X_add_number);
+ > MICROMIPSOP_MASK_TRAP)
+ as_bad (_("Trap code (%lu) for %s not in 0..15 range"),
+ (unsigned long) imm_expr.X_add_number,
+ ip->insn_mo->name);
+ INSERT_OPERAND (1, TRAP, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
default:
as_bad (_("Bad char = '%c'\n"), *args);
- internalError ();
+ abort ();
}
break;
}
/* Args don't match. */
- if (insn + 1 < &mips_opcodes[NUMOPCODES] &&
- !strcmp (insn->name, insn[1].name))
+ s = argsStart;
+ insn_error = _("Illegal operands");
+ if (insn + 1 < past && !strcmp (insn->name, insn[1].name))
{
++insn;
- s = argsStart;
- insn_error = _("Illegal operands");
continue;
}
- if (save_c)
- *(--argsStart) = save_c;
- insn_error = _("Illegal operands");
+ else if (wrong_delay_slot_insns && need_delay_slot_ok)
+ {
+ gas_assert (firstinsn);
+ need_delay_slot_ok = FALSE;
+ past = insn + 1;
+ insn = firstinsn;
+ continue;
+ }
return;
}
}
/* This routine assembles an instruction into its binary format when
assembling for the mips16. As a side effect, it sets one of the
- global variables imm_reloc or offset_reloc to the type of
- relocation to do if one of the operands is an address expression.
- It also sets mips16_small and mips16_ext if the user explicitly
- requested a small or extended instruction. */
+ global variables imm_reloc or offset_reloc to the type of relocation
+ to do if one of the operands is an address expression. It also sets
+ forced_insn_length to the resulting instruction size in bytes if the
+ user explicitly requested a small or extended instruction. */
static void
mips16_ip (char *str, struct mips_cl_insn *ip)
insn_error = NULL;
- mips16_small = FALSE;
- mips16_ext = FALSE;
+ forced_insn_length = 0;
for (s = str; ISLOWER (*s); ++s)
;
if (s[1] == 't' && s[2] == ' ')
{
*s = '\0';
- mips16_small = TRUE;
+ forced_insn_length = 2;
s += 3;
break;
}
else if (s[1] == 'e' && s[2] == ' ')
{
*s = '\0';
- mips16_ext = TRUE;
+ forced_insn_length = 4;
s += 3;
break;
}
return;
}
- if (mips_opts.noautoextend && ! mips16_ext)
- mips16_small = TRUE;
+ if (mips_opts.noautoextend && !forced_insn_length)
+ forced_insn_length = 2;
if ((insn = (struct mips_opcode *) hash_find (mips16_op_hash, str)) == NULL)
{
{
static char buf[100];
sprintf (buf,
- _("opcode not supported on this processor: %s (%s)"),
+ _("Opcode not supported on this processor: %s (%s)"),
mips_cpu_info_from_arch (mips_opts.arch)->name,
mips_cpu_info_from_isa (mips_opts.isa)->name);
insn_error = buf;
case '\0':
if (*s == '\0')
{
+ offsetT value;
+
/* Stuff the immediate value in now, if we can. */
if (imm_expr.X_op == O_constant
&& *imm_reloc > BFD_RELOC_UNUSED
- && *imm_reloc != BFD_RELOC_MIPS16_GOT16
- && *imm_reloc != BFD_RELOC_MIPS16_CALL16
- && insn->pinfo != INSN_MACRO)
+ && insn->pinfo != INSN_MACRO
+ && calculate_reloc (*offset_reloc,
+ imm_expr.X_add_number, &value))
{
- valueT tmp;
-
- switch (*offset_reloc)
- {
- case BFD_RELOC_MIPS16_HI16_S:
- tmp = (imm_expr.X_add_number + 0x8000) >> 16;
- break;
-
- case BFD_RELOC_MIPS16_HI16:
- tmp = imm_expr.X_add_number >> 16;
- break;
-
- case BFD_RELOC_MIPS16_LO16:
- tmp = ((imm_expr.X_add_number + 0x8000) & 0xffff)
- - 0x8000;
- break;
-
- case BFD_RELOC_UNUSED:
- tmp = imm_expr.X_add_number;
- break;
-
- default:
- internalError ();
- }
- *offset_reloc = BFD_RELOC_UNUSED;
-
mips16_immed (NULL, 0, *imm_reloc - BFD_RELOC_UNUSED,
- tmp, TRUE, mips16_small,
- mips16_ext, &ip->insn_opcode,
- &ip->use_extend, &ip->extend);
+ *offset_reloc, value, forced_insn_length,
+ &ip->insn_opcode);
imm_expr.X_op = O_absent;
*imm_reloc = BFD_RELOC_UNUSED;
+ *offset_reloc = BFD_RELOC_UNUSED;
}
return;
break;
default:
- internalError ();
+ abort ();
}
if (regno == ILLEGAL_REG)
MIPS16_INSERT_OPERAND (REG32R, *ip, regno);
break;
default:
- internalError ();
+ abort ();
}
lastregno = regno;
{
if (imm_expr.X_op != O_constant)
{
- mips16_ext = TRUE;
- ip->use_extend = TRUE;
- ip->extend = 0;
+ forced_insn_length = 4;
+ ip->insn_opcode |= MIPS16_EXTEND;
}
else
{
case 'm': /* Register list for save insn. */
case 'M': /* Register list for restore insn. */
{
- int opcode = 0;
+ int opcode = ip->insn_opcode;
int framesz = 0, seen_framesz = 0;
int nargs = 0, statics = 0, sregs = 0;
/* Finally build the instruction. */
if ((opcode >> 16) != 0 || framesz == 0)
- {
- ip->use_extend = TRUE;
- ip->extend = opcode >> 16;
- }
- ip->insn_opcode |= opcode & 0x7f;
+ opcode |= MIPS16_EXTEND;
+ ip->insn_opcode = opcode;
}
continue;
continue;
default:
- internalError ();
+ abort ();
}
break;
}
#define MIPS16_NUM_IMMED \
(sizeof mips16_immed_operands / sizeof mips16_immed_operands[0])
-/* Handle a mips16 instruction with an immediate value. This or's the
- small immediate value into *INSN. It sets *USE_EXTEND to indicate
- whether an extended value is needed; if one is needed, it sets
- *EXTEND to the value. The argument type is TYPE. The value is VAL.
- If SMALL is true, an unextended opcode was explicitly requested.
- If EXT is true, an extended opcode was explicitly requested. If
- WARN is true, warn if EXT does not match reality. */
+/* Marshal immediate value VAL for an extended MIPS16 instruction.
+ NBITS is the number of significant bits in VAL. */
+
+static unsigned long
+mips16_immed_extend (offsetT val, unsigned int nbits)
+{
+ int extval;
+ if (nbits == 16)
+ {
+ extval = ((val >> 11) & 0x1f) | (val & 0x7e0);
+ val &= 0x1f;
+ }
+ else if (nbits == 15)
+ {
+ extval = ((val >> 11) & 0xf) | (val & 0x7f0);
+ val &= 0xf;
+ }
+ else
+ {
+ extval = ((val & 0x1f) << 6) | (val & 0x20);
+ val = 0;
+ }
+ return (extval << 16) | val;
+}
+
+/* Install immediate value VAL into MIPS16 instruction *INSN,
+ extending it if necessary. The instruction in *INSN may
+ already be extended.
+
+ RELOC is the relocation that produced VAL, or BFD_RELOC_UNUSED
+ if none. In the former case, VAL is a 16-bit number with no
+ defined signedness.
+
+ TYPE is the type of the immediate field. USER_INSN_LENGTH
+ is the length that the user requested, or 0 if none. */
static void
-mips16_immed (char *file, unsigned int line, int type, offsetT val,
- bfd_boolean warn, bfd_boolean small, bfd_boolean ext,
- unsigned long *insn, bfd_boolean *use_extend,
- unsigned short *extend)
+mips16_immed (char *file, unsigned int line, int type,
+ bfd_reloc_code_real_type reloc, offsetT val,
+ unsigned int user_insn_length, unsigned long *insn)
{
const struct mips16_immed_operand *op;
int mintiny, maxtiny;
- bfd_boolean needext;
op = mips16_immed_operands;
while (op->type != type)
mintiny = 0;
maxtiny = (1 << op->nbits) - 1;
}
+ if (reloc != BFD_RELOC_UNUSED)
+ val &= 0xffff;
}
else
{
mintiny = - (1 << (op->nbits - 1));
maxtiny = (1 << (op->nbits - 1)) - 1;
+ if (reloc != BFD_RELOC_UNUSED)
+ val = SEXT_16BIT (val);
}
/* Branch offsets have an implicit 0 in the lowest bit. */
if ((val & ((1 << op->shift) - 1)) != 0
|| val < (mintiny << op->shift)
|| val > (maxtiny << op->shift))
- needext = TRUE;
- else
- needext = FALSE;
-
- if (warn && ext && ! needext)
- as_warn_where (file, line,
- _("extended operand requested but not required"));
- if (small && needext)
- as_bad_where (file, line, _("invalid unextended operand value"));
+ {
+ /* We need an extended instruction. */
+ if (user_insn_length == 2)
+ as_bad_where (file, line, _("invalid unextended operand value"));
+ else
+ *insn |= MIPS16_EXTEND;
+ }
+ else if (user_insn_length == 4)
+ {
+ /* The operand doesn't force an unextended instruction to be extended.
+ Warn if the user wanted an extended instruction anyway. */
+ *insn |= MIPS16_EXTEND;
+ as_warn_where (file, line,
+ _("extended operand requested but not required"));
+ }
- if (small || (! ext && ! needext))
+ if (mips16_opcode_length (*insn) == 2)
{
int insnval;
- *use_extend = FALSE;
insnval = ((val >> op->shift) & ((1 << op->nbits) - 1));
insnval <<= op->op_shift;
*insn |= insnval;
else
{
long minext, maxext;
- int extval;
-
- if (op->extu)
- {
- minext = 0;
- maxext = (1 << op->extbits) - 1;
- }
- else
- {
- minext = - (1 << (op->extbits - 1));
- maxext = (1 << (op->extbits - 1)) - 1;
- }
- if (val < minext || val > maxext)
- as_bad_where (file, line,
- _("operand value out of range for instruction"));
- *use_extend = TRUE;
- if (op->extbits == 16)
+ if (reloc == BFD_RELOC_UNUSED)
{
- extval = ((val >> 11) & 0x1f) | (val & 0x7e0);
- val &= 0x1f;
- }
- else if (op->extbits == 15)
- {
- extval = ((val >> 11) & 0xf) | (val & 0x7f0);
- val &= 0xf;
- }
- else
- {
- extval = ((val & 0x1f) << 6) | (val & 0x20);
- val = 0;
+ if (op->extu)
+ {
+ minext = 0;
+ maxext = (1 << op->extbits) - 1;
+ }
+ else
+ {
+ minext = - (1 << (op->extbits - 1));
+ maxext = (1 << (op->extbits - 1)) - 1;
+ }
+ if (val < minext || val > maxext)
+ as_bad_where (file, line,
+ _("operand value out of range for instruction"));
}
- *extend = (unsigned short) extval;
- *insn |= val;
+ *insn |= mips16_immed_extend (val, op->extbits);
}
}
\f
{"%gprel", BFD_RELOC_MIPS16_GPREL},
{"%got", BFD_RELOC_MIPS16_GOT16},
{"%call16", BFD_RELOC_MIPS16_CALL16},
- {"%hi", BFD_RELOC_MIPS16_HI16_S}
+ {"%hi", BFD_RELOC_MIPS16_HI16_S},
+ {"%tlsgd", BFD_RELOC_MIPS16_TLS_GD},
+ {"%tlsldm", BFD_RELOC_MIPS16_TLS_LDM},
+ {"%dtprel_hi", BFD_RELOC_MIPS16_TLS_DTPREL_HI16},
+ {"%dtprel_lo", BFD_RELOC_MIPS16_TLS_DTPREL_LO16},
+ {"%tprel_hi", BFD_RELOC_MIPS16_TLS_TPREL_HI16},
+ {"%tprel_lo", BFD_RELOC_MIPS16_TLS_TPREL_LO16},
+ {"%gottprel", BFD_RELOC_MIPS16_TLS_GOTTPREL}
};
save_in = input_line_pointer;
input_line_pointer = str;
expression (ep);
- expr_end = input_line_pointer;
- input_line_pointer = save_in;
-}
-
-char *
-md_atof (int type, char *litP, int *sizeP)
-{
- return ieee_md_atof (type, litP, sizeP, target_big_endian);
-}
-
-void
-md_number_to_chars (char *buf, valueT val, int n)
-{
- if (target_big_endian)
- number_to_chars_bigendian (buf, val, n);
- else
- number_to_chars_littleendian (buf, val, n);
-}
-\f
-#ifdef OBJ_ELF
-static int support_64bit_objects(void)
-{
- const char **list, **l;
- int yes;
-
- list = bfd_target_list ();
- for (l = list; *l != NULL; l++)
- if (strcmp (*l, ELF_TARGET ("elf64-", "big")) == 0
- || strcmp (*l, ELF_TARGET ("elf64-", "little")) == 0)
- break;
- yes = (*l != NULL);
- free (list);
- return yes;
-}
-#endif /* OBJ_ELF */
-
-const char *md_shortopts = "O::g::G:";
-
-enum options
- {
- OPTION_MARCH = OPTION_MD_BASE,
- OPTION_MTUNE,
- OPTION_MIPS1,
- OPTION_MIPS2,
- OPTION_MIPS3,
- OPTION_MIPS4,
- OPTION_MIPS5,
- OPTION_MIPS32,
- OPTION_MIPS64,
- OPTION_MIPS32R2,
- OPTION_MIPS64R2,
- OPTION_MIPS16,
- OPTION_NO_MIPS16,
- OPTION_MIPS3D,
- OPTION_NO_MIPS3D,
- OPTION_MDMX,
- OPTION_NO_MDMX,
- OPTION_DSP,
- OPTION_NO_DSP,
- OPTION_MT,
- OPTION_NO_MT,
- OPTION_SMARTMIPS,
- OPTION_NO_SMARTMIPS,
- OPTION_DSPR2,
- OPTION_NO_DSPR2,
- OPTION_COMPAT_ARCH_BASE,
- OPTION_M4650,
- OPTION_NO_M4650,
- OPTION_M4010,
- OPTION_NO_M4010,
- OPTION_M4100,
- OPTION_NO_M4100,
- OPTION_M3900,
- OPTION_NO_M3900,
- OPTION_M7000_HILO_FIX,
- OPTION_MNO_7000_HILO_FIX,
- OPTION_FIX_24K,
- OPTION_NO_FIX_24K,
- OPTION_FIX_LOONGSON2F_JUMP,
- OPTION_NO_FIX_LOONGSON2F_JUMP,
- OPTION_FIX_LOONGSON2F_NOP,
- OPTION_NO_FIX_LOONGSON2F_NOP,
- OPTION_FIX_VR4120,
- OPTION_NO_FIX_VR4120,
- OPTION_FIX_VR4130,
- OPTION_NO_FIX_VR4130,
- OPTION_FIX_CN63XXP1,
- OPTION_NO_FIX_CN63XXP1,
- OPTION_TRAP,
- OPTION_BREAK,
- OPTION_EB,
- OPTION_EL,
- OPTION_FP32,
- OPTION_GP32,
- OPTION_CONSTRUCT_FLOATS,
- OPTION_NO_CONSTRUCT_FLOATS,
- OPTION_FP64,
- OPTION_GP64,
- OPTION_RELAX_BRANCH,
- OPTION_NO_RELAX_BRANCH,
- OPTION_MSHARED,
- OPTION_MNO_SHARED,
- OPTION_MSYM32,
- OPTION_MNO_SYM32,
- OPTION_SOFT_FLOAT,
- OPTION_HARD_FLOAT,
- OPTION_SINGLE_FLOAT,
- OPTION_DOUBLE_FLOAT,
- OPTION_32,
-#ifdef OBJ_ELF
- OPTION_CALL_SHARED,
- OPTION_CALL_NONPIC,
- OPTION_NON_SHARED,
- OPTION_XGOT,
- OPTION_MABI,
- OPTION_N32,
- OPTION_64,
- OPTION_MDEBUG,
- OPTION_NO_MDEBUG,
- OPTION_PDR,
- OPTION_NO_PDR,
- OPTION_MVXWORKS_PIC,
-#endif /* OBJ_ELF */
- OPTION_END_OF_ENUM
- };
-
-struct option md_longopts[] =
-{
- /* Options which specify architecture. */
- {"march", required_argument, NULL, OPTION_MARCH},
- {"mtune", required_argument, NULL, OPTION_MTUNE},
- {"mips0", no_argument, NULL, OPTION_MIPS1},
- {"mips1", no_argument, NULL, OPTION_MIPS1},
- {"mips2", no_argument, NULL, OPTION_MIPS2},
- {"mips3", no_argument, NULL, OPTION_MIPS3},
- {"mips4", no_argument, NULL, OPTION_MIPS4},
- {"mips5", no_argument, NULL, OPTION_MIPS5},
- {"mips32", no_argument, NULL, OPTION_MIPS32},
- {"mips64", no_argument, NULL, OPTION_MIPS64},
- {"mips32r2", no_argument, NULL, OPTION_MIPS32R2},
- {"mips64r2", no_argument, NULL, OPTION_MIPS64R2},
-
- /* Options which specify Application Specific Extensions (ASEs). */
- {"mips16", no_argument, NULL, OPTION_MIPS16},
- {"no-mips16", no_argument, NULL, OPTION_NO_MIPS16},
- {"mips3d", no_argument, NULL, OPTION_MIPS3D},
- {"no-mips3d", no_argument, NULL, OPTION_NO_MIPS3D},
- {"mdmx", no_argument, NULL, OPTION_MDMX},
- {"no-mdmx", no_argument, NULL, OPTION_NO_MDMX},
- {"mdsp", no_argument, NULL, OPTION_DSP},
- {"mno-dsp", no_argument, NULL, OPTION_NO_DSP},
- {"mmt", no_argument, NULL, OPTION_MT},
- {"mno-mt", no_argument, NULL, OPTION_NO_MT},
- {"msmartmips", no_argument, NULL, OPTION_SMARTMIPS},
- {"mno-smartmips", no_argument, NULL, OPTION_NO_SMARTMIPS},
- {"mdspr2", no_argument, NULL, OPTION_DSPR2},
- {"mno-dspr2", no_argument, NULL, OPTION_NO_DSPR2},
-
- /* Old-style architecture options. Don't add more of these. */
- {"m4650", no_argument, NULL, OPTION_M4650},
- {"no-m4650", no_argument, NULL, OPTION_NO_M4650},
- {"m4010", no_argument, NULL, OPTION_M4010},
- {"no-m4010", no_argument, NULL, OPTION_NO_M4010},
- {"m4100", no_argument, NULL, OPTION_M4100},
- {"no-m4100", no_argument, NULL, OPTION_NO_M4100},
- {"m3900", no_argument, NULL, OPTION_M3900},
- {"no-m3900", no_argument, NULL, OPTION_NO_M3900},
-
- /* Options which enable bug fixes. */
- {"mfix7000", no_argument, NULL, OPTION_M7000_HILO_FIX},
- {"no-fix-7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX},
- {"mno-fix7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX},
- {"mfix-loongson2f-jump", no_argument, NULL, OPTION_FIX_LOONGSON2F_JUMP},
- {"mno-fix-loongson2f-jump", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_JUMP},
- {"mfix-loongson2f-nop", no_argument, NULL, OPTION_FIX_LOONGSON2F_NOP},
- {"mno-fix-loongson2f-nop", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_NOP},
- {"mfix-vr4120", no_argument, NULL, OPTION_FIX_VR4120},
- {"mno-fix-vr4120", no_argument, NULL, OPTION_NO_FIX_VR4120},
- {"mfix-vr4130", no_argument, NULL, OPTION_FIX_VR4130},
- {"mno-fix-vr4130", no_argument, NULL, OPTION_NO_FIX_VR4130},
- {"mfix-24k", no_argument, NULL, OPTION_FIX_24K},
- {"mno-fix-24k", no_argument, NULL, OPTION_NO_FIX_24K},
- {"mfix-cn63xxp1", no_argument, NULL, OPTION_FIX_CN63XXP1},
- {"mno-fix-cn63xxp1", no_argument, NULL, OPTION_NO_FIX_CN63XXP1},
+ expr_end = input_line_pointer;
+ input_line_pointer = save_in;
+}
- /* Miscellaneous options. */
- {"trap", no_argument, NULL, OPTION_TRAP},
- {"no-break", no_argument, NULL, OPTION_TRAP},
- {"break", no_argument, NULL, OPTION_BREAK},
- {"no-trap", no_argument, NULL, OPTION_BREAK},
- {"EB", no_argument, NULL, OPTION_EB},
- {"EL", no_argument, NULL, OPTION_EL},
- {"mfp32", no_argument, NULL, OPTION_FP32},
- {"mgp32", no_argument, NULL, OPTION_GP32},
- {"construct-floats", no_argument, NULL, OPTION_CONSTRUCT_FLOATS},
- {"no-construct-floats", no_argument, NULL, OPTION_NO_CONSTRUCT_FLOATS},
- {"mfp64", no_argument, NULL, OPTION_FP64},
- {"mgp64", no_argument, NULL, OPTION_GP64},
- {"relax-branch", no_argument, NULL, OPTION_RELAX_BRANCH},
- {"no-relax-branch", no_argument, NULL, OPTION_NO_RELAX_BRANCH},
- {"mshared", no_argument, NULL, OPTION_MSHARED},
- {"mno-shared", no_argument, NULL, OPTION_MNO_SHARED},
- {"msym32", no_argument, NULL, OPTION_MSYM32},
- {"mno-sym32", no_argument, NULL, OPTION_MNO_SYM32},
- {"msoft-float", no_argument, NULL, OPTION_SOFT_FLOAT},
- {"mhard-float", no_argument, NULL, OPTION_HARD_FLOAT},
- {"msingle-float", no_argument, NULL, OPTION_SINGLE_FLOAT},
- {"mdouble-float", no_argument, NULL, OPTION_DOUBLE_FLOAT},
+char *
+md_atof (int type, char *litP, int *sizeP)
+{
+ return ieee_md_atof (type, litP, sizeP, target_big_endian);
+}
- /* Strictly speaking this next option is ELF specific,
- but we allow it for other ports as well in order to
- make testing easier. */
- {"32", no_argument, NULL, OPTION_32},
-
- /* ELF-specific options. */
+void
+md_number_to_chars (char *buf, valueT val, int n)
+{
+ if (target_big_endian)
+ number_to_chars_bigendian (buf, val, n);
+ else
+ number_to_chars_littleendian (buf, val, n);
+}
+\f
#ifdef OBJ_ELF
- {"KPIC", no_argument, NULL, OPTION_CALL_SHARED},
- {"call_shared", no_argument, NULL, OPTION_CALL_SHARED},
- {"call_nonpic", no_argument, NULL, OPTION_CALL_NONPIC},
- {"non_shared", no_argument, NULL, OPTION_NON_SHARED},
- {"xgot", no_argument, NULL, OPTION_XGOT},
- {"mabi", required_argument, NULL, OPTION_MABI},
- {"n32", no_argument, NULL, OPTION_N32},
- {"64", no_argument, NULL, OPTION_64},
- {"mdebug", no_argument, NULL, OPTION_MDEBUG},
- {"no-mdebug", no_argument, NULL, OPTION_NO_MDEBUG},
- {"mpdr", no_argument, NULL, OPTION_PDR},
- {"mno-pdr", no_argument, NULL, OPTION_NO_PDR},
- {"mvxworks-pic", no_argument, NULL, OPTION_MVXWORKS_PIC},
-#endif /* OBJ_ELF */
+static int support_64bit_objects(void)
+{
+ const char **list, **l;
+ int yes;
- {NULL, no_argument, NULL, 0}
-};
-size_t md_longopts_size = sizeof (md_longopts);
+ list = bfd_target_list ();
+ for (l = list; *l != NULL; l++)
+ if (strcmp (*l, ELF_TARGET ("elf64-", "big")) == 0
+ || strcmp (*l, ELF_TARGET ("elf64-", "little")) == 0)
+ break;
+ yes = (*l != NULL);
+ free (list);
+ return yes;
+}
+#endif /* OBJ_ELF */
/* Set STRING_PTR (either &mips_arch_string or &mips_tune_string) to
NEW_VALUE. Warn if another value was already specified. Note:
break;
case OPTION_MDMX:
- mips_opts.ase_mdmx = 1;
+ mips_opts.ase |= ASE_MDMX;
+ file_ase_explicit |= ASE_MDMX;
break;
case OPTION_NO_MDMX:
- mips_opts.ase_mdmx = 0;
+ mips_opts.ase &= ~ASE_MDMX;
+ file_ase_explicit |= ASE_MDMX;
break;
case OPTION_DSP:
- mips_opts.ase_dsp = 1;
- mips_opts.ase_dspr2 = 0;
+ mips_opts.ase |= ASE_DSP;
+ mips_opts.ase &= ~ASE_DSPR2;
+ file_ase_explicit |= ASE_DSP | ASE_DSPR2;
+ break;
+
+ case OPTION_DSPR2:
+ mips_opts.ase |= ASE_DSP | ASE_DSPR2;
+ file_ase_explicit |= ASE_DSP | ASE_DSPR2;
break;
case OPTION_NO_DSP:
- mips_opts.ase_dsp = 0;
- mips_opts.ase_dspr2 = 0;
+ case OPTION_NO_DSPR2:
+ mips_opts.ase &= ~(ASE_DSP | ASE_DSPR2);
+ file_ase_explicit |= ASE_DSP | ASE_DSPR2;
break;
- case OPTION_DSPR2:
- mips_opts.ase_dspr2 = 1;
- mips_opts.ase_dsp = 1;
+ case OPTION_EVA:
+ mips_opts.ase |= ASE_EVA;
+ file_ase_explicit |= ASE_EVA;
break;
- case OPTION_NO_DSPR2:
- mips_opts.ase_dspr2 = 0;
- mips_opts.ase_dsp = 0;
+ case OPTION_NO_EVA:
+ mips_opts.ase &= ~ASE_EVA;
+ file_ase_explicit |= ASE_EVA;
break;
case OPTION_MT:
- mips_opts.ase_mt = 1;
+ mips_opts.ase |= ASE_MT;
+ file_ase_explicit |= ASE_MT;
break;
case OPTION_NO_MT:
- mips_opts.ase_mt = 0;
+ mips_opts.ase &= ~ASE_MT;
+ file_ase_explicit |= ASE_MT;
+ break;
+
+ case OPTION_MCU:
+ mips_opts.ase |= ASE_MCU;
+ file_ase_explicit |= ASE_MCU;
+ break;
+
+ case OPTION_NO_MCU:
+ mips_opts.ase &= ~ASE_MCU;
+ file_ase_explicit |= ASE_MCU;
+ break;
+
+ case OPTION_MICROMIPS:
+ if (mips_opts.mips16 == 1)
+ {
+ as_bad (_("-mmicromips cannot be used with -mips16"));
+ return 0;
+ }
+ mips_opts.micromips = 1;
+ mips_no_prev_insn ();
+ break;
+
+ case OPTION_NO_MICROMIPS:
+ mips_opts.micromips = 0;
+ mips_no_prev_insn ();
+ break;
+
+ case OPTION_VIRT:
+ mips_opts.ase |= ASE_VIRT;
+ file_ase_explicit |= ASE_VIRT;
+ break;
+
+ case OPTION_NO_VIRT:
+ mips_opts.ase &= ~ASE_VIRT;
+ file_ase_explicit |= ASE_VIRT;
break;
case OPTION_MIPS16:
+ if (mips_opts.micromips == 1)
+ {
+ as_bad (_("-mips16 cannot be used with -micromips"));
+ return 0;
+ }
mips_opts.mips16 = 1;
mips_no_prev_insn ();
break;
break;
case OPTION_MIPS3D:
- mips_opts.ase_mips3d = 1;
+ mips_opts.ase |= ASE_MIPS3D;
+ file_ase_explicit |= ASE_MIPS3D;
break;
case OPTION_NO_MIPS3D:
- mips_opts.ase_mips3d = 0;
+ mips_opts.ase &= ~ASE_MIPS3D;
+ file_ase_explicit |= ASE_MIPS3D;
break;
case OPTION_SMARTMIPS:
- mips_opts.ase_smartmips = 1;
+ mips_opts.ase |= ASE_SMARTMIPS;
+ file_ase_explicit |= ASE_SMARTMIPS;
break;
case OPTION_NO_SMARTMIPS:
- mips_opts.ase_smartmips = 0;
+ mips_opts.ase &= ~ASE_SMARTMIPS;
+ file_ase_explicit |= ASE_SMARTMIPS;
break;
case OPTION_FIX_24K:
}
if (arch_info == 0)
- arch_info = mips_parse_cpu ("default CPU", MIPS_CPU_STRING_DEFAULT);
+ {
+ arch_info = mips_parse_cpu ("default CPU", MIPS_CPU_STRING_DEFAULT);
+ gas_assert (arch_info);
+ }
if (ABI_NEEDS_64BIT_REGS (mips_abi) && !ISA_HAS_64BIT_REGS (arch_info->isa))
as_bad (_("-march=%s is not compatible with the selected ABI"),
if (file_mips_gp32 == 0)
/* 64-bit integer registers implies 64-bit float registers. */
file_mips_fp32 = 0;
- else if ((mips_opts.ase_mips3d > 0 || mips_opts.ase_mdmx > 0)
+ else if ((mips_opts.ase & (ASE_MIPS3D | ASE_MDMX))
&& ISA_HAS_64BIT_FPRS (mips_opts.isa))
/* -mips3d and -mdmx imply 64-bit float registers, if possible. */
file_mips_fp32 = 0;
generation of code for them. */
if (mips_opts.mips16 == -1)
mips_opts.mips16 = (CPU_HAS_MIPS16 (file_mips_arch)) ? 1 : 0;
- if (mips_opts.ase_mips3d == -1)
- mips_opts.ase_mips3d = ((arch_info->flags & MIPS_CPU_ASE_MIPS3D)
- && file_mips_fp32 == 0) ? 1 : 0;
- if (mips_opts.ase_mips3d && file_mips_fp32 == 1)
+ if (mips_opts.micromips == -1)
+ mips_opts.micromips = (CPU_HAS_MICROMIPS (file_mips_arch)) ? 1 : 0;
+
+ /* MIPS3D and MDMX require 64-bit FPRs, so -mfp32 should stop those
+ ASEs from being selected implicitly. */
+ if (file_mips_fp32 == 1)
+ file_ase_explicit |= ASE_MIPS3D | ASE_MDMX;
+
+ /* If the user didn't explicitly select or deselect a particular ASE,
+ use the default setting for the CPU. */
+ mips_opts.ase |= (arch_info->ase & ~file_ase_explicit);
+
+ if ((mips_opts.ase & ASE_MIPS3D) && file_mips_fp32 == 1)
as_bad (_("-mfp32 used with -mips3d"));
- if (mips_opts.ase_mdmx == -1)
- mips_opts.ase_mdmx = ((arch_info->flags & MIPS_CPU_ASE_MDMX)
- && file_mips_fp32 == 0) ? 1 : 0;
- if (mips_opts.ase_mdmx && file_mips_fp32 == 1)
+ if ((mips_opts.ase & ASE_MDMX) && file_mips_fp32 == 1)
as_bad (_("-mfp32 used with -mdmx"));
- if (mips_opts.ase_smartmips == -1)
- mips_opts.ase_smartmips = (arch_info->flags & MIPS_CPU_ASE_SMARTMIPS) ? 1 : 0;
- if (mips_opts.ase_smartmips && !ISA_SUPPORTS_SMARTMIPS)
+ if ((mips_opts.ase & ASE_SMARTMIPS) && !ISA_SUPPORTS_SMARTMIPS)
as_warn (_("%s ISA does not support SmartMIPS"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
- if (mips_opts.ase_dsp == -1)
- mips_opts.ase_dsp = (arch_info->flags & MIPS_CPU_ASE_DSP) ? 1 : 0;
- if (mips_opts.ase_dsp && !ISA_SUPPORTS_DSP_ASE)
+ if ((mips_opts.ase & ASE_DSP) && !ISA_SUPPORTS_DSP_ASE)
as_warn (_("%s ISA does not support DSP ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
- if (mips_opts.ase_dspr2 == -1)
- {
- mips_opts.ase_dspr2 = (arch_info->flags & MIPS_CPU_ASE_DSPR2) ? 1 : 0;
- mips_opts.ase_dsp = (arch_info->flags & MIPS_CPU_ASE_DSP) ? 1 : 0;
- }
- if (mips_opts.ase_dspr2 && !ISA_SUPPORTS_DSPR2_ASE)
+ if ((mips_opts.ase & ASE_DSPR2) && !ISA_SUPPORTS_DSPR2_ASE)
as_warn (_("%s ISA does not support DSP R2 ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
- if (mips_opts.ase_mt == -1)
- mips_opts.ase_mt = (arch_info->flags & MIPS_CPU_ASE_MT) ? 1 : 0;
- if (mips_opts.ase_mt && !ISA_SUPPORTS_MT_ASE)
+ if ((mips_opts.ase & ASE_EVA) && !ISA_SUPPORTS_EVA_ASE)
+ as_warn (_("%s ISA does not support EVA ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+
+ if ((mips_opts.ase & ASE_MT) && !ISA_SUPPORTS_MT_ASE)
as_warn (_("%s ISA does not support MT ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
+ if ((mips_opts.ase & ASE_MCU) && !ISA_SUPPORTS_MCU_ASE)
+ as_warn (_("%s ISA does not support MCU ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+
+ if ((mips_opts.ase & ASE_VIRT) && !ISA_SUPPORTS_VIRT_ASE)
+ as_warn (_("%s ISA does not support Virtualization ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+
file_mips_isa = mips_opts.isa;
- file_ase_mips3d = mips_opts.ase_mips3d;
- file_ase_mdmx = mips_opts.ase_mdmx;
- file_ase_smartmips = mips_opts.ase_smartmips;
- file_ase_dsp = mips_opts.ase_dsp;
- file_ase_dspr2 = mips_opts.ase_dspr2;
- file_ase_mt = mips_opts.ase_mt;
+ file_ase = mips_opts.ase;
mips_opts.gp32 = file_mips_gp32;
mips_opts.fp32 = file_mips_fp32;
mips_opts.soft_float = file_mips_soft_float;
valueT addr = fixP->fx_where + fixP->fx_frag->fr_address;
switch (fixP->fx_r_type)
{
+ case BFD_RELOC_MICROMIPS_7_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_10_PCREL_S1:
+ /* Return the address of the delay slot. */
+ return addr + 2;
+
+ case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_JMP:
case BFD_RELOC_16_PCREL_S2:
case BFD_RELOC_MIPS_JMP:
/* Return the address of the delay slot. */
return addr + 4;
+
+ case BFD_RELOC_32_PCREL:
+ return addr;
+
default:
/* We have no relocation type for PC relative MIPS16 instructions. */
if (fixP->fx_addsy && S_GET_SEGMENT (fixP->fx_addsy) != now_seg)
gas_assert (reloc_needs_lo_p (l->fixp->fx_r_type));
/* If a GOT16 relocation turns out to be against a global symbol,
- there isn't supposed to be a matching LO. */
+ there isn't supposed to be a matching LO. Ignore %gots against
+ constants; we'll report an error for those later. */
if (got16_reloc_p (l->fixp->fx_r_type)
- && !pic_need_relax (l->fixp->fx_addsy, l->seg))
+ && !(l->fixp->fx_addsy
+ && pic_need_relax (l->fixp->fx_addsy, l->seg)))
continue;
/* Check quickly whether the next fixup happens to be a matching %lo. */
}
}
-/* We may have combined relocations without symbols in the N32/N64 ABI.
- We have to prevent gas from dropping them. */
-
int
mips_force_relocation (fixS *fixp)
{
if (generic_force_reloc (fixp))
return 1;
- if (HAVE_NEWABI
- && S_GET_SEGMENT (fixp->fx_addsy) == bfd_abs_section_ptr
- && (fixp->fx_r_type == BFD_RELOC_MIPS_SUB
- || hi16_reloc_p (fixp->fx_r_type)
- || lo16_reloc_p (fixp->fx_r_type)))
+ /* We want to keep BFD_RELOC_MICROMIPS_*_PCREL_S1 relocation,
+ so that the linker relaxation can update targets. */
+ if (fixp->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1
+ || fixp->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1
+ || fixp->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1)
return 1;
return 0;
}
+/* Read the instruction associated with RELOC from BUF. */
+
+static unsigned int
+read_reloc_insn (char *buf, bfd_reloc_code_real_type reloc)
+{
+ if (mips16_reloc_p (reloc) || micromips_reloc_p (reloc))
+ return read_compressed_insn (buf, 4);
+ else
+ return read_insn (buf);
+}
+
+/* Write instruction INSN to BUF, given that it has been relocated
+ by RELOC. */
+
+static void
+write_reloc_insn (char *buf, bfd_reloc_code_real_type reloc,
+ unsigned long insn)
+{
+ if (mips16_reloc_p (reloc) || micromips_reloc_p (reloc))
+ write_compressed_insn (buf, insn, 4);
+ else
+ write_insn (buf, insn);
+}
+
/* Apply a fixup to the object file. */
void
md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
- bfd_byte *buf;
- long insn;
+ char *buf;
+ unsigned long insn;
reloc_howto_type *howto;
/* We ignore generic BFD relocations we don't know about. */
if (! howto)
return;
- gas_assert (fixP->fx_size == 4
+ gas_assert (fixP->fx_size == 2
+ || fixP->fx_size == 4
|| fixP->fx_r_type == BFD_RELOC_16
|| fixP->fx_r_type == BFD_RELOC_64
|| fixP->fx_r_type == BFD_RELOC_CTOR
|| fixP->fx_r_type == BFD_RELOC_MIPS_SUB
+ || fixP->fx_r_type == BFD_RELOC_MICROMIPS_SUB
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY
|| fixP->fx_r_type == BFD_RELOC_MIPS_TLS_DTPREL64);
- buf = (bfd_byte *) (fixP->fx_frag->fr_literal + fixP->fx_where);
+ buf = fixP->fx_frag->fr_literal + fixP->fx_where;
- gas_assert (!fixP->fx_pcrel || fixP->fx_r_type == BFD_RELOC_16_PCREL_S2);
+ gas_assert (!fixP->fx_pcrel || fixP->fx_r_type == BFD_RELOC_16_PCREL_S2
+ || fixP->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1
+ || fixP->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1
+ || fixP->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1
+ || fixP->fx_r_type == BFD_RELOC_32_PCREL);
/* Don't treat parts of a composite relocation as done. There are two
reasons for this:
case BFD_RELOC_MIPS_TLS_DTPREL_HI16:
case BFD_RELOC_MIPS_TLS_DTPREL_LO16:
case BFD_RELOC_MIPS_TLS_GOTTPREL:
+ case BFD_RELOC_MIPS_TLS_TPREL32:
+ case BFD_RELOC_MIPS_TLS_TPREL64:
case BFD_RELOC_MIPS_TLS_TPREL_HI16:
case BFD_RELOC_MIPS_TLS_TPREL_LO16:
+ case BFD_RELOC_MICROMIPS_TLS_GD:
+ case BFD_RELOC_MICROMIPS_TLS_LDM:
+ case BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16:
+ case BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16:
+ case BFD_RELOC_MICROMIPS_TLS_GOTTPREL:
+ case BFD_RELOC_MICROMIPS_TLS_TPREL_HI16:
+ case BFD_RELOC_MICROMIPS_TLS_TPREL_LO16:
+ case BFD_RELOC_MIPS16_TLS_GD:
+ case BFD_RELOC_MIPS16_TLS_LDM:
+ case BFD_RELOC_MIPS16_TLS_DTPREL_HI16:
+ case BFD_RELOC_MIPS16_TLS_DTPREL_LO16:
+ case BFD_RELOC_MIPS16_TLS_GOTTPREL:
+ case BFD_RELOC_MIPS16_TLS_TPREL_HI16:
+ case BFD_RELOC_MIPS16_TLS_TPREL_LO16:
+ if (!fixP->fx_addsy)
+ {
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("TLS relocation against a constant"));
+ break;
+ }
S_SET_THREAD_LOCAL (fixP->fx_addsy);
/* fall through */
case BFD_RELOC_MIPS_JALR:
case BFD_RELOC_HI16:
case BFD_RELOC_HI16_S:
+ case BFD_RELOC_LO16:
case BFD_RELOC_GPREL16:
case BFD_RELOC_MIPS_LITERAL:
case BFD_RELOC_MIPS_CALL16:
case BFD_RELOC_MIPS16_CALL16:
case BFD_RELOC_MIPS16_HI16:
case BFD_RELOC_MIPS16_HI16_S:
+ case BFD_RELOC_MIPS16_LO16:
case BFD_RELOC_MIPS16_JMP:
- /* Nothing needed to do. The value comes from the reloc entry. */
+ case BFD_RELOC_MICROMIPS_JMP:
+ case BFD_RELOC_MICROMIPS_GOT_DISP:
+ case BFD_RELOC_MICROMIPS_GOT_PAGE:
+ case BFD_RELOC_MICROMIPS_GOT_OFST:
+ case BFD_RELOC_MICROMIPS_SUB:
+ case BFD_RELOC_MICROMIPS_HIGHEST:
+ case BFD_RELOC_MICROMIPS_HIGHER:
+ case BFD_RELOC_MICROMIPS_SCN_DISP:
+ case BFD_RELOC_MICROMIPS_JALR:
+ case BFD_RELOC_MICROMIPS_HI16:
+ case BFD_RELOC_MICROMIPS_HI16_S:
+ case BFD_RELOC_MICROMIPS_LO16:
+ case BFD_RELOC_MICROMIPS_GPREL16:
+ case BFD_RELOC_MICROMIPS_LITERAL:
+ case BFD_RELOC_MICROMIPS_CALL16:
+ case BFD_RELOC_MICROMIPS_GOT16:
+ case BFD_RELOC_MICROMIPS_GOT_HI16:
+ case BFD_RELOC_MICROMIPS_GOT_LO16:
+ case BFD_RELOC_MICROMIPS_CALL_HI16:
+ case BFD_RELOC_MICROMIPS_CALL_LO16:
+ case BFD_RELOC_MIPS_EH:
+ if (fixP->fx_done)
+ {
+ offsetT value;
+
+ if (calculate_reloc (fixP->fx_r_type, *valP, &value))
+ {
+ insn = read_reloc_insn (buf, fixP->fx_r_type);
+ if (mips16_reloc_p (fixP->fx_r_type))
+ insn |= mips16_immed_extend (value, 16);
+ else
+ insn |= (value & 0xffff);
+ write_reloc_insn (buf, fixP->fx_r_type, insn);
+ }
+ else
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Unsupported constant in relocation"));
+ }
break;
case BFD_RELOC_64:
if (fixP->fx_done)
{
if (8 <= sizeof (valueT))
- md_number_to_chars ((char *) buf, *valP, 8);
+ md_number_to_chars (buf, *valP, 8);
else
{
valueT hiv;
hiv = 0xffffffff;
else
hiv = 0;
- md_number_to_chars ((char *)(buf + (target_big_endian ? 4 : 0)),
- *valP, 4);
- md_number_to_chars ((char *)(buf + (target_big_endian ? 0 : 4)),
- hiv, 4);
+ md_number_to_chars (buf + (target_big_endian ? 4 : 0), *valP, 4);
+ md_number_to_chars (buf + (target_big_endian ? 0 : 4), hiv, 4);
}
}
break;
case BFD_RELOC_RVA:
case BFD_RELOC_32:
+ case BFD_RELOC_32_PCREL:
case BFD_RELOC_16:
/* If we are deleting this reloc entry, we must fill in the
value now. This can happen if we have a .word which is not
resolved when it appears but is later defined. */
if (fixP->fx_done)
- md_number_to_chars ((char *) buf, *valP, fixP->fx_size);
- break;
-
- case BFD_RELOC_LO16:
- case BFD_RELOC_MIPS16_LO16:
- /* FIXME: Now that embedded-PIC is gone, some of this code/comment
- may be safe to remove, but if so it's not obvious. */
- /* When handling an embedded PIC switch statement, we can wind
- up deleting a LO16 reloc. See the 'o' case in mips_ip. */
- if (fixP->fx_done)
- {
- if (*valP + 0x8000 > 0xffff)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("relocation overflow"));
- if (target_big_endian)
- buf += 2;
- md_number_to_chars ((char *) buf, *valP, 2);
- }
+ md_number_to_chars (buf, *valP, fixP->fx_size);
break;
case BFD_RELOC_16_PCREL_S2:
break;
/* Update old instruction data. */
- if (target_big_endian)
- insn = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
- else
- insn = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ insn = read_insn (buf);
if (*valP + 0x20000 <= 0x3ffff)
{
insn |= (*valP >> 2) & 0xffff;
- md_number_to_chars ((char *) buf, insn, 4);
+ write_insn (buf, insn);
}
else if (mips_pic == NO_PIC
&& fixP->fx_done
fixP->fx_done = 0;
fixP->fx_addsy = section_symbol (text_section);
*valP += md_pcrel_from (fixP);
- md_number_to_chars ((char *) buf, insn, 4);
+ write_insn (buf, insn);
}
else
{
}
break;
+ case BFD_RELOC_MICROMIPS_7_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_10_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ /* We adjust the offset back to even. */
+ if ((*valP & 0x1) != 0)
+ --(*valP);
+
+ if (! fixP->fx_done)
+ break;
+
+ /* Should never visit here, because we keep the relocation. */
+ abort ();
+ break;
+
case BFD_RELOC_VTABLE_INHERIT:
fixP->fx_done = 0;
if (fixP->fx_addsy
break;
default:
- internalError ();
+ abort ();
}
/* Remember value for tc_gen_reloc. */
fill byte should be used, FILL points to an integer that contains
that byte, otherwise FILL is null.
- The MIPS assembler also automatically adjusts any preceding
- label. */
+ This function used to have the comment:
+
+ The MIPS assembler also automatically adjusts any preceding label.
+
+ The implementation therefore applied the adjustment to a maximum of
+ one label. However, other label adjustments are applied to batches
+ of labels, and adjusting just one caused problems when new labels
+ were added for the sake of debugging or unwind information.
+ We therefore adjust all preceding labels (given as LABELS) instead. */
static void
-mips_align (int to, int *fill, symbolS *label)
+mips_align (int to, int *fill, struct insn_label_list *labels)
{
mips_emit_delays ();
- mips_record_mips16_mode ();
+ mips_record_compressed_mode ();
if (fill == NULL && subseg_text_p (now_seg))
frag_align_code (to, 0);
else
frag_align (to, fill ? *fill : 0, 0);
record_alignment (now_seg, to);
- if (label != NULL)
- {
- gas_assert (S_GET_SEGMENT (label) == now_seg);
- symbol_set_frag (label, frag_now);
- S_SET_VALUE (label, (valueT) frag_now_fix ());
- }
+ mips_move_labels (labels, FALSE);
}
/* Align to a given power of two. .align 0 turns off the automatic
struct insn_label_list *l = si->label_list;
/* Auto alignment should be switched on by next section change. */
auto_align = 1;
- mips_align (temp, fill_ptr, l != NULL ? l->label : NULL);
+ mips_align (temp, fill_ptr, l);
}
else
{
{
segment_info_type *si = seg_info (now_seg);
struct insn_label_list *l = si->label_list;
- symbolS *label;
- label = l != NULL ? l->label : NULL;
mips_emit_delays ();
if (log_size > 0 && auto_align)
- mips_align (log_size, 0, label);
+ mips_align (log_size, 0, l);
cons (1 << log_size);
mips_clear_insn_labels ();
}
{
segment_info_type *si = seg_info (now_seg);
struct insn_label_list *l = si->label_list;
- symbolS *label;
-
- label = l != NULL ? l->label : NULL;
mips_emit_delays ();
if (auto_align)
{
if (type == 'd')
- mips_align (3, 0, label);
+ mips_align (3, 0, l);
else
- mips_align (2, 0, label);
+ mips_align (2, 0, l);
}
float_cons (type);
mips_pic = NO_PIC;
else if (i == 2)
{
- mips_pic = SVR4_PIC;
+ mips_pic = SVR4_PIC;
mips_abicalls = TRUE;
}
else
mips_opts.single_float = 0;
else if (strcmp (name, "mips16") == 0
|| strcmp (name, "MIPS-16") == 0)
- mips_opts.mips16 = 1;
+ {
+ if (mips_opts.micromips == 1)
+ as_fatal (_("`mips16' cannot be used with `micromips'"));
+ mips_opts.mips16 = 1;
+ }
else if (strcmp (name, "nomips16") == 0
|| strcmp (name, "noMIPS-16") == 0)
mips_opts.mips16 = 0;
+ else if (strcmp (name, "micromips") == 0)
+ {
+ if (mips_opts.mips16 == 1)
+ as_fatal (_("`micromips' cannot be used with `mips16'"));
+ mips_opts.micromips = 1;
+ }
+ else if (strcmp (name, "nomicromips") == 0)
+ mips_opts.micromips = 0;
else if (strcmp (name, "smartmips") == 0)
{
if (!ISA_SUPPORTS_SMARTMIPS)
as_warn (_("%s ISA does not support SmartMIPS ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
- mips_opts.ase_smartmips = 1;
+ mips_opts.ase |= ASE_SMARTMIPS;
}
else if (strcmp (name, "nosmartmips") == 0)
- mips_opts.ase_smartmips = 0;
+ mips_opts.ase &= ~ASE_SMARTMIPS;
else if (strcmp (name, "mips3d") == 0)
- mips_opts.ase_mips3d = 1;
+ mips_opts.ase |= ASE_MIPS3D;
else if (strcmp (name, "nomips3d") == 0)
- mips_opts.ase_mips3d = 0;
+ mips_opts.ase &= ~ASE_MIPS3D;
else if (strcmp (name, "mdmx") == 0)
- mips_opts.ase_mdmx = 1;
+ mips_opts.ase |= ASE_MDMX;
else if (strcmp (name, "nomdmx") == 0)
- mips_opts.ase_mdmx = 0;
+ mips_opts.ase &= ~ASE_MDMX;
else if (strcmp (name, "dsp") == 0)
{
if (!ISA_SUPPORTS_DSP_ASE)
as_warn (_("%s ISA does not support DSP ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
- mips_opts.ase_dsp = 1;
- mips_opts.ase_dspr2 = 0;
- }
- else if (strcmp (name, "nodsp") == 0)
- {
- mips_opts.ase_dsp = 0;
- mips_opts.ase_dspr2 = 0;
+ mips_opts.ase |= ASE_DSP;
+ mips_opts.ase &= ~ASE_DSPR2;
}
else if (strcmp (name, "dspr2") == 0)
{
if (!ISA_SUPPORTS_DSPR2_ASE)
as_warn (_("%s ISA does not support DSP R2 ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
- mips_opts.ase_dspr2 = 1;
- mips_opts.ase_dsp = 1;
+ mips_opts.ase |= ASE_DSP | ASE_DSPR2;
}
- else if (strcmp (name, "nodspr2") == 0)
+ else if (strcmp (name, "nodsp") == 0
+ || strcmp (name, "nodspr2") == 0)
+ mips_opts.ase &= ~(ASE_DSP | ASE_DSPR2);
+ else if (strcmp (name, "eva") == 0)
{
- mips_opts.ase_dspr2 = 0;
- mips_opts.ase_dsp = 0;
+ if (!ISA_SUPPORTS_EVA_ASE)
+ as_warn (_("%s ISA does not support EVA ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ mips_opts.ase |= ASE_EVA;
}
+ else if (strcmp (name, "noeva") == 0)
+ mips_opts.ase &= ~ASE_EVA;
else if (strcmp (name, "mt") == 0)
{
if (!ISA_SUPPORTS_MT_ASE)
as_warn (_("%s ISA does not support MT ASE"),
mips_cpu_info_from_isa (mips_opts.isa)->name);
- mips_opts.ase_mt = 1;
+ mips_opts.ase |= ASE_MT;
}
else if (strcmp (name, "nomt") == 0)
- mips_opts.ase_mt = 0;
+ mips_opts.ase &= ~ASE_MT;
+ else if (strcmp (name, "mcu") == 0)
+ mips_opts.ase |= ASE_MCU;
+ else if (strcmp (name, "nomcu") == 0)
+ mips_opts.ase &= ~ASE_MCU;
+ else if (strcmp (name, "virt") == 0)
+ {
+ if (!ISA_SUPPORTS_VIRT_ASE)
+ as_warn (_("%s ISA does not support Virtualization ASE"),
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ mips_opts.ase |= ASE_VIRT;
+ }
+ else if (strcmp (name, "novirt") == 0)
+ mips_opts.ase &= ~ASE_VIRT;
else if (strncmp (name, "mips", 4) == 0 || strncmp (name, "arch=", 5) == 0)
{
int reset = 0;
case ISA_MIPS64:
case ISA_MIPS64R2:
mips_opts.gp32 = 0;
+ if (mips_opts.arch == CPU_R5900)
+ {
+ mips_opts.fp32 = 1;
+ }
+ else
+ {
mips_opts.fp32 = 0;
+ }
break;
default:
as_bad (_("unknown ISA level %s"), name + 4);
return;
}
+ if (mips_opts.mips16)
+ {
+ as_bad (_("%s not supported in MIPS16 mode"), ".cpload");
+ ignore_rest_of_line ();
+ return;
+ }
+
/* .cpload should be in a .set noreorder section. */
if (mips_opts.noreorder == 0)
as_warn (_(".cpload not in noreorder section"));
/* In ELF, this symbol is implicitly an STT_OBJECT symbol. */
symbol_get_bfdsym (ex.X_add_symbol)->flags |= BSF_OBJECT;
+ mips_mark_labels ();
+ mips_assembling_insn = TRUE;
+
macro_start ();
macro_build_lui (&ex, mips_gp_register);
macro_build (&ex, "addiu", "t,r,j", mips_gp_register,
mips_gp_register, reg);
macro_end ();
+ mips_assembling_insn = FALSE;
demand_empty_rest_of_line ();
}
return;
}
+ if (mips_opts.mips16)
+ {
+ as_bad (_("%s not supported in MIPS16 mode"), ".cpsetup");
+ ignore_rest_of_line ();
+ return;
+ }
+
reg1 = tc_get_register (0);
SKIP_WHITESPACE ();
if (*input_line_pointer != ',')
SKIP_WHITESPACE ();
expression (&ex_sym);
+ mips_mark_labels ();
+ mips_assembling_insn = TRUE;
+
macro_start ();
if (mips_cpreturn_register == -1)
{
if (mips_in_shared || HAVE_64BIT_SYMBOLS)
{
- macro_build (&ex_sym, "lui", "t,u", mips_gp_register,
+ macro_build (&ex_sym, "lui", LUI_FMT, mips_gp_register,
-1, BFD_RELOC_GPREL16, BFD_RELOC_MIPS_SUB,
BFD_RELOC_HI16_S);
macro_end ();
+ mips_assembling_insn = FALSE;
demand_empty_rest_of_line ();
}
return;
}
+ if (mips_opts.mips16)
+ {
+ as_bad (_("%s not supported in MIPS16 mode"), ".cplocal");
+ ignore_rest_of_line ();
+ return;
+ }
+
mips_gp_register = tc_get_register (0);
demand_empty_rest_of_line ();
}
return;
}
+ if (mips_opts.mips16)
+ {
+ as_bad (_("%s not supported in MIPS16 mode"), ".cprestore");
+ ignore_rest_of_line ();
+ return;
+ }
+
mips_cprestore_offset = get_absolute_expression ();
mips_cprestore_valid = 1;
ex.X_op_symbol = NULL;
ex.X_add_number = mips_cprestore_offset;
+ mips_mark_labels ();
+ mips_assembling_insn = TRUE;
+
macro_start ();
macro_build_ldst_constoffset (&ex, ADDRESS_STORE_INSN, mips_gp_register,
SP, HAVE_64BIT_ADDRESSES);
macro_end ();
+ mips_assembling_insn = FALSE;
demand_empty_rest_of_line ();
}
return;
}
+ if (mips_opts.mips16)
+ {
+ as_bad (_("%s not supported in MIPS16 mode"), ".cpreturn");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ mips_mark_labels ();
+ mips_assembling_insn = TRUE;
+
macro_start ();
if (mips_cpreturn_register == -1)
{
mips_cpreturn_register, 0);
macro_end ();
+ mips_assembling_insn = FALSE;
demand_empty_rest_of_line ();
}
-/* Handle the .dtprelword and .dtpreldword pseudo-ops. They generate
- a 32-bit or 64-bit DTP-relative relocation (BYTES says which) for
- use in DWARF debug information. */
+/* Handle a .dtprelword, .dtpreldword, .tprelword, or .tpreldword
+ pseudo-op; DIRSTR says which. The pseudo-op generates a BYTES-size
+ DTP- or TP-relative relocation of type RTYPE, for use in either DWARF
+ debug information or MIPS16 TLS. */
static void
-s_dtprel_internal (size_t bytes)
+s_tls_rel_directive (const size_t bytes, const char *dirstr,
+ bfd_reloc_code_real_type rtype)
{
expressionS ex;
char *p;
if (ex.X_op != O_symbol)
{
- as_bad (_("Unsupported use of %s"), (bytes == 8
- ? ".dtpreldword"
- : ".dtprelword"));
+ as_bad (_("Unsupported use of %s"), dirstr);
ignore_rest_of_line ();
}
p = frag_more (bytes);
md_number_to_chars (p, 0, bytes);
- fix_new_exp (frag_now, p - frag_now->fr_literal, bytes, &ex, FALSE,
- (bytes == 8
- ? BFD_RELOC_MIPS_TLS_DTPREL64
- : BFD_RELOC_MIPS_TLS_DTPREL32));
-
+ fix_new_exp (frag_now, p - frag_now->fr_literal, bytes, &ex, FALSE, rtype);
demand_empty_rest_of_line ();
+ mips_clear_insn_labels ();
}
/* Handle .dtprelword. */
static void
s_dtprelword (int ignore ATTRIBUTE_UNUSED)
{
- s_dtprel_internal (4);
+ s_tls_rel_directive (4, ".dtprelword", BFD_RELOC_MIPS_TLS_DTPREL32);
}
/* Handle .dtpreldword. */
static void
s_dtpreldword (int ignore ATTRIBUTE_UNUSED)
{
- s_dtprel_internal (8);
+ s_tls_rel_directive (8, ".dtpreldword", BFD_RELOC_MIPS_TLS_DTPREL64);
+}
+
+/* Handle .tprelword. */
+
+static void
+s_tprelword (int ignore ATTRIBUTE_UNUSED)
+{
+ s_tls_rel_directive (4, ".tprelword", BFD_RELOC_MIPS_TLS_TPREL32);
+}
+
+/* Handle .tpreldword. */
+
+static void
+s_tpreldword (int ignore ATTRIBUTE_UNUSED)
+{
+ s_tls_rel_directive (8, ".tpreldword", BFD_RELOC_MIPS_TLS_TPREL64);
}
/* Handle the .gpvalue pseudo-op. This is used when generating NewABI PIC
{
segment_info_type *si;
struct insn_label_list *l;
- symbolS *label;
expressionS ex;
char *p;
si = seg_info (now_seg);
l = si->label_list;
- label = l != NULL ? l->label : NULL;
mips_emit_delays ();
if (auto_align)
- mips_align (2, 0, label);
+ mips_align (2, 0, l);
expression (&ex);
mips_clear_insn_labels ();
{
segment_info_type *si;
struct insn_label_list *l;
- symbolS *label;
expressionS ex;
char *p;
si = seg_info (now_seg);
l = si->label_list;
- label = l != NULL ? l->label : NULL;
mips_emit_delays ();
if (auto_align)
- mips_align (3, 0, label);
+ mips_align (3, 0, l);
expression (&ex);
mips_clear_insn_labels ();
demand_empty_rest_of_line ();
}
+/* Handle the .ehword pseudo-op. This is used when generating unwinding
+ tables. It generates a R_MIPS_EH reloc. */
+
+static void
+s_ehword (int ignore ATTRIBUTE_UNUSED)
+{
+ expressionS ex;
+ char *p;
+
+ mips_emit_delays ();
+
+ expression (&ex);
+ mips_clear_insn_labels ();
+
+ if (ex.X_op != O_symbol || ex.X_add_number != 0)
+ {
+ as_bad (_("Unsupported use of .ehword"));
+ ignore_rest_of_line ();
+ }
+
+ p = frag_more (4);
+ md_number_to_chars (p, 0, 4);
+ fix_new_exp (frag_now, p - frag_now->fr_literal, 4, &ex, FALSE,
+ BFD_RELOC_MIPS_EH);
+
+ demand_empty_rest_of_line ();
+}
+
/* Handle the .cpadd pseudo-op. This is used when dealing with switch
tables in SVR4 PIC code. */
return;
}
+ mips_mark_labels ();
+ mips_assembling_insn = TRUE;
+
/* Add $gp to the register named as an argument. */
macro_start ();
reg = tc_get_register (0);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", reg, reg, mips_gp_register);
macro_end ();
+ mips_assembling_insn = FALSE;
demand_empty_rest_of_line ();
}
/* Handle the .insn pseudo-op. This marks instruction labels in
- mips16 mode. This permits the linker to handle them specially,
+ mips16/micromips mode. This permits the linker to handle them specially,
such as generating jalx instructions when needed. We also make
them odd for the duration of the assembly, in order to generate the
right sort of code. We will make them even in the adjust_symtab
static void
s_insn (int ignore ATTRIBUTE_UNUSED)
{
- mips16_mark_labels ();
+ mips_mark_labels ();
demand_empty_rest_of_line ();
}
-/* Handle a .stabn directive. We need these in order to mark a label
- as being a mips16 text label correctly. Sometimes the compiler
- will emit a label, followed by a .stabn, and then switch sections.
- If the label and .stabn are in mips16 mode, then the label is
- really a mips16 text label. */
+/* Handle a .stab[snd] directive. Ideally these directives would be
+ implemented in a transparent way, so that removing them would not
+ have any effect on the generated instructions. However, s_stab
+ internally changes the section, so in practice we need to decide
+ now whether the preceding label marks compressed code. We do not
+ support changing the compression mode of a label after a .stab*
+ directive, such as in:
+
+ foo:
+ .stabs ...
+ .set mips16
+
+ so the current mode wins. */
static void
s_mips_stab (int type)
{
- if (type == 'n')
- mips16_mark_labels ();
-
+ mips_mark_labels ();
s_stab (type);
}
symsec = S_GET_SEGMENT (sym);
/* This must duplicate the test in adjust_reloc_syms. */
- return (symsec != &bfd_und_section
- && symsec != &bfd_abs_section
+ return (!bfd_is_und_section (symsec)
+ && !bfd_is_abs_section (symsec)
&& !bfd_is_com_section (symsec)
&& !s_is_linkonce (sym, segtype)
#ifdef OBJ_ELF
return length;
}
+/* Compute the length of a branch sequence, and adjust the
+ RELAX_MICROMIPS_TOOFAR32 bit accordingly. If FRAGP is NULL, the
+ worst-case length is computed, with UPDATE being used to indicate
+ whether an unconditional (-1), or regular (0) branch is to be
+ computed. */
+
+static int
+relaxed_micromips_32bit_branch_length (fragS *fragp, asection *sec, int update)
+{
+ bfd_boolean toofar;
+ int length;
+
+ if (fragp
+ && S_IS_DEFINED (fragp->fr_symbol)
+ && sec == S_GET_SEGMENT (fragp->fr_symbol))
+ {
+ addressT addr;
+ offsetT val;
+
+ val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset;
+ /* Ignore the low bit in the target, since it will be set
+ for a text label. */
+ if ((val & 1) != 0)
+ --val;
+
+ addr = fragp->fr_address + fragp->fr_fix + 4;
+
+ val -= addr;
+
+ toofar = val < - (0x8000 << 1) || val >= (0x8000 << 1);
+ }
+ else if (fragp)
+ /* If the symbol is not defined or it's in a different segment,
+ assume the user knows what's going on and emit a short
+ branch. */
+ toofar = FALSE;
+ else
+ toofar = TRUE;
+
+ if (fragp && update
+ && toofar != RELAX_MICROMIPS_TOOFAR32 (fragp->fr_subtype))
+ fragp->fr_subtype = (toofar
+ ? RELAX_MICROMIPS_MARK_TOOFAR32 (fragp->fr_subtype)
+ : RELAX_MICROMIPS_CLEAR_TOOFAR32 (fragp->fr_subtype));
+
+ length = 4;
+ if (toofar)
+ {
+ bfd_boolean compact_known = fragp != NULL;
+ bfd_boolean compact = FALSE;
+ bfd_boolean uncond;
+
+ if (compact_known)
+ compact = RELAX_MICROMIPS_COMPACT (fragp->fr_subtype);
+ if (fragp)
+ uncond = RELAX_MICROMIPS_UNCOND (fragp->fr_subtype);
+ else
+ uncond = update < 0;
+
+ /* If label is out of range, we turn branch <br>:
+
+ <br> label # 4 bytes
+ 0:
+
+ into:
+
+ j label # 4 bytes
+ nop # 2 bytes if compact && !PIC
+ 0:
+ */
+ if (mips_pic == NO_PIC && (!compact_known || compact))
+ length += 2;
+
+ /* If assembling PIC code, we further turn:
+
+ j label # 4 bytes
+
+ into:
+
+ lw/ld at, %got(label)(gp) # 4 bytes
+ d/addiu at, %lo(label) # 4 bytes
+ jr/c at # 2 bytes
+ */
+ if (mips_pic != NO_PIC)
+ length += 6;
+
+ /* If branch <br> is conditional, we prepend negated branch <brneg>:
+
+ <brneg> 0f # 4 bytes
+ nop # 2 bytes if !compact
+ */
+ if (!uncond)
+ length += (compact_known && compact) ? 4 : 6;
+ }
+
+ return length;
+}
+
+/* Compute the length of a branch, and adjust the RELAX_MICROMIPS_TOOFAR16
+ bit accordingly. */
+
+static int
+relaxed_micromips_16bit_branch_length (fragS *fragp, asection *sec, int update)
+{
+ bfd_boolean toofar;
+
+ if (fragp
+ && S_IS_DEFINED (fragp->fr_symbol)
+ && sec == S_GET_SEGMENT (fragp->fr_symbol))
+ {
+ addressT addr;
+ offsetT val;
+ int type;
+
+ val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset;
+ /* Ignore the low bit in the target, since it will be set
+ for a text label. */
+ if ((val & 1) != 0)
+ --val;
+
+ /* Assume this is a 2-byte branch. */
+ addr = fragp->fr_address + fragp->fr_fix + 2;
+
+ /* We try to avoid the infinite loop by not adding 2 more bytes for
+ long branches. */
+
+ val -= addr;
+
+ type = RELAX_MICROMIPS_TYPE (fragp->fr_subtype);
+ if (type == 'D')
+ toofar = val < - (0x200 << 1) || val >= (0x200 << 1);
+ else if (type == 'E')
+ toofar = val < - (0x40 << 1) || val >= (0x40 << 1);
+ else
+ abort ();
+ }
+ else
+ /* If the symbol is not defined or it's in a different segment,
+ we emit a normal 32-bit branch. */
+ toofar = TRUE;
+
+ if (fragp && update
+ && toofar != RELAX_MICROMIPS_TOOFAR16 (fragp->fr_subtype))
+ fragp->fr_subtype
+ = toofar ? RELAX_MICROMIPS_MARK_TOOFAR16 (fragp->fr_subtype)
+ : RELAX_MICROMIPS_CLEAR_TOOFAR16 (fragp->fr_subtype);
+
+ if (toofar)
+ return 4;
+
+ return 2;
+}
+
/* Estimate the size of a frag before relaxing. Unless this is the
mips16, we are not really relaxing here, and the final size is
encoded in the subtype information. For the mips16, we have to
into infinite loops. We change it only in mips_relax_frag(). */
return (RELAX_MIPS16_EXTENDED (fragp->fr_subtype) ? 4 : 2);
+ if (RELAX_MICROMIPS_P (fragp->fr_subtype))
+ {
+ int length = 4;
+
+ if (RELAX_MICROMIPS_TYPE (fragp->fr_subtype) != 0)
+ length = relaxed_micromips_16bit_branch_length (fragp, segtype, FALSE);
+ if (length == 4 && RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype))
+ length = relaxed_micromips_32bit_branch_length (fragp, segtype, FALSE);
+ fragp->fr_var = length;
+
+ return length;
+ }
+
if (mips_pic == NO_PIC)
change = nopic_need_relax (fragp->fr_symbol, 0);
else if (mips_pic == SVR4_PIC)
return 0;
/* There is no place to store an in-place offset for JALR relocations.
- Likewise an in-range offset of PC-relative relocations may overflow
- the in-place relocatable field if recalculated against the start
- address of the symbol's containing section. */
+ Likewise an in-range offset of limited PC-relative relocations may
+ overflow the in-place relocatable field if recalculated against the
+ start address of the symbol's containing section. */
if (HAVE_IN_PLACE_ADDENDS
- && (fixp->fx_pcrel || fixp->fx_r_type == BFD_RELOC_MIPS_JALR))
+ && (limited_pcrel_reloc_p (fixp->fx_r_type)
+ || jalr_reloc_p (fixp->fx_r_type)))
return 0;
#ifdef OBJ_ELF
There is a further restriction:
- 5. We cannot reduce R_MIPS16_26 relocations against MIPS16 symbols
- on targets with in-place addends; the relocation field cannot
+ 5. We cannot reduce jump relocations (R_MIPS_26, R_MIPS16_26 or
+ R_MICROMIPS_26_S1) against MIPS16 or microMIPS symbols on
+ targets with in-place addends; the relocation field cannot
encode the low bit.
- For simplicity, we deal with (3)-(5) by not reducing _any_ relocation
- against a MIPS16 symbol.
+ For simplicity, we deal with (3)-(4) by not reducing _any_ relocation
+ against a MIPS16 symbol. We deal with (5) by by not reducing any
+ such relocations on REL targets.
We deal with (1)-(2) by saying that, if there's a R_MIPS16_26
relocation against some symbol R, no relocation against R may be
if (IS_ELF
&& fixp->fx_subsy == NULL
&& (ELF_ST_IS_MIPS16 (S_GET_OTHER (fixp->fx_addsy))
- || *symbol_get_tc (fixp->fx_addsy)))
+ || *symbol_get_tc (fixp->fx_addsy)
+ || (HAVE_IN_PLACE_ADDENDS
+ && ELF_ST_IS_MICROMIPS (S_GET_OTHER (fixp->fx_addsy))
+ && jmp_reloc_p (fixp->fx_r_type))))
return 0;
#endif
if (fixp->fx_pcrel)
{
- gas_assert (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2);
+ gas_assert (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1
+ || fixp->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1
+ || fixp->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1
+ || fixp->fx_r_type == BFD_RELOC_32_PCREL);
/* At this point, fx_addnumber is "symbol offset - pcrel address".
Relocations want only the symbol offset. */
return fragp->fr_var - old_var;
}
+ if (RELAX_MICROMIPS_P (fragp->fr_subtype))
+ {
+ offsetT old_var = fragp->fr_var;
+ offsetT new_var = 4;
+
+ if (RELAX_MICROMIPS_TYPE (fragp->fr_subtype) != 0)
+ new_var = relaxed_micromips_16bit_branch_length (fragp, sec, TRUE);
+ if (new_var == 4 && RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype))
+ new_var = relaxed_micromips_32bit_branch_length (fragp, sec, TRUE);
+ fragp->fr_var = new_var;
+
+ return new_var - old_var;
+ }
+
if (! RELAX_MIPS16_P (fragp->fr_subtype))
return 0;
{
if (RELAX_BRANCH_P (fragp->fr_subtype))
{
- bfd_byte *buf;
+ char *buf;
unsigned long insn;
expressionS exp;
fixS *fixp;
- buf = (bfd_byte *)fragp->fr_literal + fragp->fr_fix;
-
- if (target_big_endian)
- insn = bfd_getb32 (buf);
- else
- insn = bfd_getl32 (buf);
+ buf = fragp->fr_literal + fragp->fr_fix;
+ insn = read_insn (buf);
if (!RELAX_BRANCH_TOOFAR (fragp->fr_subtype))
{
exp.X_add_symbol = fragp->fr_symbol;
exp.X_add_number = fragp->fr_offset;
- fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
- 4, &exp, TRUE, BFD_RELOC_16_PCREL_S2);
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, TRUE,
+ BFD_RELOC_16_PCREL_S2);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars ((char *) buf, insn, 4);
- buf += 4;
+ buf = write_insn (buf, insn);
}
else
{
switch ((insn >> 28) & 0xf)
{
case 4:
- /* bc[0-3][tf]l? and bc1any[24][ft] instructions can
- have the condition reversed by tweaking a single
- bit, and their opcodes all have 0x4???????. */
- gas_assert ((insn & 0xf1000000) == 0x41000000);
+ /* bc[0-3][tf]l? instructions can have the condition
+ reversed by tweaking a single TF bit, and their
+ opcodes all have 0x4???????. */
+ gas_assert ((insn & 0xf3e00000) == 0x41000000);
insn ^= 0x00010000;
break;
else
{
/* How many bytes in instructions we've already emitted? */
- i = buf - (bfd_byte *)fragp->fr_literal - fragp->fr_fix;
+ i = buf - fragp->fr_literal - fragp->fr_fix;
/* How many bytes in instructions from here to the end? */
i = fragp->fr_var - i;
}
i--;
insn |= i;
/* Branch over the jump. */
- md_number_to_chars ((char *) buf, insn, 4);
- buf += 4;
+ buf = write_insn (buf, insn);
/* nop */
- md_number_to_chars ((char *) buf, 0, 4);
- buf += 4;
+ buf = write_insn (buf, 0);
if (RELAX_BRANCH_LIKELY (fragp->fr_subtype))
{
/* Compute the PC offset from the current instruction to
the end of the variable frag. */
/* How many bytes in instructions we've already emitted? */
- i = buf - (bfd_byte *)fragp->fr_literal - fragp->fr_fix;
+ i = buf - fragp->fr_literal - fragp->fr_fix;
/* How many bytes in instructions from here to the end? */
i = fragp->fr_var - i;
/* Convert to instruction count. */
i >>= 2;
/* Don't decrement i, because we want to branch over the
delay slot. */
-
insn |= i;
- md_number_to_chars ((char *) buf, insn, 4);
- buf += 4;
- md_number_to_chars ((char *) buf, 0, 4);
- buf += 4;
+ buf = write_insn (buf, insn);
+ buf = write_insn (buf, 0);
}
uncond:
exp.X_add_symbol = fragp->fr_symbol;
exp.X_add_number = fragp->fr_offset;
- fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
- 4, &exp, FALSE, BFD_RELOC_MIPS_JMP);
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp,
+ FALSE, BFD_RELOC_MIPS_JMP);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars ((char *) buf, insn, 4);
- buf += 4;
+ buf = write_insn (buf, insn);
}
else
{
exp.X_add_number = 0;
}
- fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
- 4, &exp, FALSE, BFD_RELOC_MIPS_GOT16);
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp,
+ FALSE, BFD_RELOC_MIPS_GOT16);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars ((char *) buf, insn, 4);
- buf += 4;
+ buf = write_insn (buf, insn);
if (mips_opts.isa == ISA_MIPS1)
- {
- /* nop */
- md_number_to_chars ((char *) buf, 0, 4);
- buf += 4;
- }
+ /* nop */
+ buf = write_insn (buf, 0);
/* d/addiu $at, $at, <sym> R_MIPS_LO16 */
insn = HAVE_64BIT_ADDRESSES ? 0x64000000 : 0x24000000;
insn |= at << OP_SH_RS | at << OP_SH_RT;
- fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
- 4, &exp, FALSE, BFD_RELOC_LO16);
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp,
+ FALSE, BFD_RELOC_LO16);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars ((char *) buf, insn, 4);
- buf += 4;
+ buf = write_insn (buf, insn);
/* j(al)r $at. */
if (RELAX_BRANCH_LINK (fragp->fr_subtype))
insn = 0x00000008;
insn |= at << OP_SH_RS;
- md_number_to_chars ((char *) buf, insn, 4);
- buf += 4;
+ buf = write_insn (buf, insn);
}
}
- gas_assert (buf == (bfd_byte *)fragp->fr_literal
- + fragp->fr_fix + fragp->fr_var);
+ fragp->fr_fix += fragp->fr_var;
+ gas_assert (buf == fragp->fr_literal + fragp->fr_fix);
+ return;
+ }
+
+ /* Relax microMIPS branches. */
+ if (RELAX_MICROMIPS_P (fragp->fr_subtype))
+ {
+ char *buf = fragp->fr_literal + fragp->fr_fix;
+ bfd_boolean compact = RELAX_MICROMIPS_COMPACT (fragp->fr_subtype);
+ bfd_boolean al = RELAX_MICROMIPS_LINK (fragp->fr_subtype);
+ int type = RELAX_MICROMIPS_TYPE (fragp->fr_subtype);
+ bfd_boolean short_ds;
+ unsigned long insn;
+ expressionS exp;
+ fixS *fixp;
+
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = fragp->fr_symbol;
+ exp.X_add_number = fragp->fr_offset;
fragp->fr_fix += fragp->fr_var;
+ /* Handle 16-bit branches that fit or are forced to fit. */
+ if (type != 0 && !RELAX_MICROMIPS_TOOFAR16 (fragp->fr_subtype))
+ {
+ /* We generate a fixup instead of applying it right now,
+ because if there is linker relaxation, we're going to
+ need the relocations. */
+ if (type == 'D')
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 2, &exp, TRUE,
+ BFD_RELOC_MICROMIPS_10_PCREL_S1);
+ else if (type == 'E')
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 2, &exp, TRUE,
+ BFD_RELOC_MICROMIPS_7_PCREL_S1);
+ else
+ abort ();
+
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+
+ /* These relocations can have an addend that won't fit in
+ 2 octets. */
+ fixp->fx_no_overflow = 1;
+
+ return;
+ }
+
+ /* Handle 32-bit branches that fit or are forced to fit. */
+ if (!RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype)
+ || !RELAX_MICROMIPS_TOOFAR32 (fragp->fr_subtype))
+ {
+ /* We generate a fixup instead of applying it right now,
+ because if there is linker relaxation, we're going to
+ need the relocations. */
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, TRUE,
+ BFD_RELOC_MICROMIPS_16_PCREL_S1);
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+
+ if (type == 0)
+ return;
+ }
+
+ /* Relax 16-bit branches to 32-bit branches. */
+ if (type != 0)
+ {
+ insn = read_compressed_insn (buf, 2);
+
+ if ((insn & 0xfc00) == 0xcc00) /* b16 */
+ insn = 0x94000000; /* beq */
+ else if ((insn & 0xdc00) == 0x8c00) /* beqz16/bnez16 */
+ {
+ unsigned long regno;
+
+ regno = (insn >> MICROMIPSOP_SH_MD) & MICROMIPSOP_MASK_MD;
+ regno = micromips_to_32_reg_d_map [regno];
+ insn = ((insn & 0x2000) << 16) | 0x94000000; /* beq/bne */
+ insn |= regno << MICROMIPSOP_SH_RS;
+ }
+ else
+ abort ();
+
+ /* Nothing else to do, just write it out. */
+ if (!RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype)
+ || !RELAX_MICROMIPS_TOOFAR32 (fragp->fr_subtype))
+ {
+ buf = write_compressed_insn (buf, insn, 4);
+ gas_assert (buf == fragp->fr_literal + fragp->fr_fix);
+ return;
+ }
+ }
+ else
+ insn = read_compressed_insn (buf, 4);
+
+ /* Relax 32-bit branches to a sequence of instructions. */
+ as_warn_where (fragp->fr_file, fragp->fr_line,
+ _("Relaxed out-of-range branch into a jump"));
+
+ /* Set the short-delay-slot bit. */
+ short_ds = al && (insn & 0x02000000) != 0;
+
+ if (!RELAX_MICROMIPS_UNCOND (fragp->fr_subtype))
+ {
+ symbolS *l;
+
+ /* Reverse the branch. */
+ if ((insn & 0xfc000000) == 0x94000000 /* beq */
+ || (insn & 0xfc000000) == 0xb4000000) /* bne */
+ insn ^= 0x20000000;
+ else if ((insn & 0xffe00000) == 0x40000000 /* bltz */
+ || (insn & 0xffe00000) == 0x40400000 /* bgez */
+ || (insn & 0xffe00000) == 0x40800000 /* blez */
+ || (insn & 0xffe00000) == 0x40c00000 /* bgtz */
+ || (insn & 0xffe00000) == 0x40a00000 /* bnezc */
+ || (insn & 0xffe00000) == 0x40e00000 /* beqzc */
+ || (insn & 0xffe00000) == 0x40200000 /* bltzal */
+ || (insn & 0xffe00000) == 0x40600000 /* bgezal */
+ || (insn & 0xffe00000) == 0x42200000 /* bltzals */
+ || (insn & 0xffe00000) == 0x42600000) /* bgezals */
+ insn ^= 0x00400000;
+ else if ((insn & 0xffe30000) == 0x43800000 /* bc1f */
+ || (insn & 0xffe30000) == 0x43a00000 /* bc1t */
+ || (insn & 0xffe30000) == 0x42800000 /* bc2f */
+ || (insn & 0xffe30000) == 0x42a00000) /* bc2t */
+ insn ^= 0x00200000;
+ else
+ abort ();
+
+ if (al)
+ {
+ /* Clear the and-link and short-delay-slot bits. */
+ gas_assert ((insn & 0xfda00000) == 0x40200000);
+
+ /* bltzal 0x40200000 bgezal 0x40600000 */
+ /* bltzals 0x42200000 bgezals 0x42600000 */
+ insn &= ~0x02200000;
+ }
+
+ /* Make a label at the end for use with the branch. */
+ l = symbol_new (micromips_label_name (), asec, fragp->fr_fix, fragp);
+ micromips_label_inc ();
+#if defined(OBJ_ELF) || defined(OBJ_MAYBE_ELF)
+ if (IS_ELF)
+ S_SET_OTHER (l, ELF_ST_SET_MICROMIPS (S_GET_OTHER (l)));
+#endif
+
+ /* Refer to it. */
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4, l, 0, TRUE,
+ BFD_RELOC_MICROMIPS_16_PCREL_S1);
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+
+ /* Branch over the jump. */
+ buf = write_compressed_insn (buf, insn, 4);
+ if (!compact)
+ /* nop */
+ buf = write_compressed_insn (buf, 0x0c00, 2);
+ }
+
+ if (mips_pic == NO_PIC)
+ {
+ unsigned long jal = short_ds ? 0x74000000 : 0xf4000000; /* jal/s */
+
+ /* j/jal/jals <sym> R_MICROMIPS_26_S1 */
+ insn = al ? jal : 0xd4000000;
+
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE,
+ BFD_RELOC_MICROMIPS_JMP);
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+
+ buf = write_compressed_insn (buf, insn, 4);
+ if (compact)
+ /* nop */
+ buf = write_compressed_insn (buf, 0x0c00, 2);
+ }
+ else
+ {
+ unsigned long at = RELAX_MICROMIPS_AT (fragp->fr_subtype);
+ unsigned long jalr = short_ds ? 0x45e0 : 0x45c0; /* jalr/s */
+ unsigned long jr = compact ? 0x45a0 : 0x4580; /* jr/c */
+
+ /* lw/ld $at, <sym>($gp) R_MICROMIPS_GOT16 */
+ insn = HAVE_64BIT_ADDRESSES ? 0xdc1c0000 : 0xfc1c0000;
+ insn |= at << MICROMIPSOP_SH_RT;
+
+ if (exp.X_add_number)
+ {
+ exp.X_add_symbol = make_expr_symbol (&exp);
+ exp.X_add_number = 0;
+ }
+
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE,
+ BFD_RELOC_MICROMIPS_GOT16);
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+
+ buf = write_compressed_insn (buf, insn, 4);
+
+ /* d/addiu $at, $at, <sym> R_MICROMIPS_LO16 */
+ insn = HAVE_64BIT_ADDRESSES ? 0x5c000000 : 0x30000000;
+ insn |= at << MICROMIPSOP_SH_RT | at << MICROMIPSOP_SH_RS;
+
+ fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE,
+ BFD_RELOC_MICROMIPS_LO16);
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+
+ buf = write_compressed_insn (buf, insn, 4);
+
+ /* jr/jrc/jalr/jalrs $at */
+ insn = al ? jalr : jr;
+ insn |= at << MICROMIPSOP_SH_MJ;
+
+ buf = write_compressed_insn (buf, insn, 2);
+ }
+
+ gas_assert (buf == fragp->fr_literal + fragp->fr_fix);
return;
}
{
int type;
const struct mips16_immed_operand *op;
- bfd_boolean small, ext;
offsetT val;
- bfd_byte *buf;
+ char *buf;
+ unsigned int user_length, length;
unsigned long insn;
- bfd_boolean use_extend;
- unsigned short extend;
+ bfd_boolean ext;
type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
op = mips16_immed_operands;
while (op->type != type)
++op;
- if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
- {
- small = FALSE;
- ext = TRUE;
- }
- else
- {
- small = TRUE;
- ext = FALSE;
- }
-
+ ext = RELAX_MIPS16_EXTENDED (fragp->fr_subtype);
val = resolve_symbol_value (fragp->fr_symbol);
if (op->pcrel)
{
as_warn_where (fragp->fr_file, fragp->fr_line,
_("extended instruction in delay slot"));
- buf = (bfd_byte *) (fragp->fr_literal + fragp->fr_fix);
+ buf = fragp->fr_literal + fragp->fr_fix;
- if (target_big_endian)
- insn = bfd_getb16 (buf);
- else
- insn = bfd_getl16 (buf);
+ insn = read_compressed_insn (buf, 2);
+ if (ext)
+ insn |= MIPS16_EXTEND;
- mips16_immed (fragp->fr_file, fragp->fr_line, type, val,
- RELAX_MIPS16_USER_EXT (fragp->fr_subtype),
- small, ext, &insn, &use_extend, &extend);
+ if (RELAX_MIPS16_USER_EXT (fragp->fr_subtype))
+ user_length = 4;
+ else if (RELAX_MIPS16_USER_SMALL (fragp->fr_subtype))
+ user_length = 2;
+ else
+ user_length = 0;
- if (use_extend)
- {
- md_number_to_chars ((char *) buf, 0xf000 | extend, 2);
- fragp->fr_fix += 2;
- buf += 2;
- }
+ mips16_immed (fragp->fr_file, fragp->fr_line, type,
+ BFD_RELOC_UNUSED, val, user_length, &insn);
- md_number_to_chars ((char *) buf, insn, 2);
- fragp->fr_fix += 2;
- buf += 2;
+ length = (ext ? 4 : 2);
+ gas_assert (mips16_opcode_length (insn) == length);
+ write_compressed_insn (buf, insn, length);
+ fragp->fr_fix += length;
}
else
{
+ relax_substateT subtype = fragp->fr_subtype;
+ bfd_boolean second_longer = (subtype & RELAX_SECOND_LONGER) != 0;
+ bfd_boolean use_second = (subtype & RELAX_USE_SECOND) != 0;
int first, second;
fixS *fixp;
- first = RELAX_FIRST (fragp->fr_subtype);
- second = RELAX_SECOND (fragp->fr_subtype);
+ first = RELAX_FIRST (subtype);
+ second = RELAX_SECOND (subtype);
fixp = (fixS *) fragp->fr_opcode;
+ /* If the delay slot chosen does not match the size of the instruction,
+ then emit a warning. */
+ if ((!use_second && (subtype & RELAX_DELAY_SLOT_SIZE_FIRST) != 0)
+ || (use_second && (subtype & RELAX_DELAY_SLOT_SIZE_SECOND) != 0))
+ {
+ relax_substateT s;
+ const char *msg;
+
+ s = subtype & (RELAX_DELAY_SLOT_16BIT
+ | RELAX_DELAY_SLOT_SIZE_FIRST
+ | RELAX_DELAY_SLOT_SIZE_SECOND);
+ msg = macro_warning (s);
+ if (msg != NULL)
+ as_warn_where (fragp->fr_file, fragp->fr_line, "%s", msg);
+ subtype &= ~s;
+ }
+
/* Possibly emit a warning if we've chosen the longer option. */
- if (((fragp->fr_subtype & RELAX_USE_SECOND) != 0)
- == ((fragp->fr_subtype & RELAX_SECOND_LONGER) != 0))
+ if (use_second == second_longer)
{
- const char *msg = macro_warning (fragp->fr_subtype);
- if (msg != 0)
+ relax_substateT s;
+ const char *msg;
+
+ s = (subtype
+ & (RELAX_SECOND_LONGER | RELAX_NOMACRO | RELAX_DELAY_SLOT));
+ msg = macro_warning (s);
+ if (msg != NULL)
as_warn_where (fragp->fr_file, fragp->fr_line, "%s", msg);
+ subtype &= ~s;
}
/* Go through all the fixups for the first sequence. Disable them
&& fixp->fx_frag == fragp
&& fixp->fx_where < fragp->fr_fix - second)
{
- if (fragp->fr_subtype & RELAX_USE_SECOND)
+ if (subtype & RELAX_USE_SECOND)
fixp->fx_done = 1;
fixp = fixp->fx_next;
}
addresses to account for the relaxation. */
while (fixp && fixp->fx_frag == fragp)
{
- if (fragp->fr_subtype & RELAX_USE_SECOND)
+ if (subtype & RELAX_USE_SECOND)
fixp->fx_where -= first;
else
fixp->fx_done = 1;
}
/* Now modify the frag contents. */
- if (fragp->fr_subtype & RELAX_USE_SECOND)
+ if (subtype & RELAX_USE_SECOND)
{
char *start;
syms = bfd_get_outsymbols (stdoutput);
count = bfd_get_symcount (stdoutput);
for (i = 0; i < count; i++, syms++)
- {
- if (ELF_ST_IS_MIPS16 (elf_symbol (*syms)->internal_elf_sym.st_other)
- && ((*syms)->value & 1) != 0)
- {
- (*syms)->value &= ~1;
- /* If the symbol has an odd size, it was probably computed
- incorrectly, so adjust that as well. */
- if ((elf_symbol (*syms)->internal_elf_sym.st_size & 1) != 0)
- ++elf_symbol (*syms)->internal_elf_sym.st_size;
- }
- }
+ if (ELF_ST_IS_COMPRESSED (elf_symbol (*syms)->internal_elf_sym.st_other)
+ && ((*syms)->value & 1) != 0)
+ {
+ (*syms)->value &= ~1;
+ /* If the symbol has an odd size, it was probably computed
+ incorrectly, so adjust that as well. */
+ if ((elf_symbol (*syms)->internal_elf_sym.st_size & 1) != 0)
+ ++elf_symbol (*syms)->internal_elf_sym.st_size;
+ }
}
#endif
move it. This also bumps the value of the symbol by 1 in compressed
code. */
-void
+static void
mips_record_label (symbolS *sym)
{
segment_info_type *si = seg_info (now_seg);
dwarf2_emit_label (sym);
#endif
}
+
+/* This function is called by tc_new_dot_label whenever a new dot symbol
+ is defined. */
+
+void
+mips_add_dot_label (symbolS *sym)
+{
+ mips_record_label (sym);
+ if (mips_assembling_insn && HAVE_CODE_COMPRESSION)
+ mips_compressed_mark_label (sym);
+}
\f
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_NOREORDER;
if (mips_pic != NO_PIC)
{
- elf_elfheader (stdoutput)->e_flags |= EF_MIPS_PIC;
+ elf_elfheader (stdoutput)->e_flags |= EF_MIPS_PIC;
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_CPIC;
}
if (mips_abicalls)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_CPIC;
- /* Set MIPS ELF flags for ASEs. */
- /* We may need to define a new flag for DSP ASE, and set this flag when
- file_ase_dsp is true. */
- /* Same for DSP R2. */
- /* We may need to define a new flag for MT ASE, and set this flag when
- file_ase_mt is true. */
+ /* Set MIPS ELF flags for ASEs. Note that not all ASEs have flags
+ defined at present; this might need to change in future. */
if (file_ase_mips16)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_M16;
-#if 0 /* XXX FIXME */
- if (file_ase_mips3d)
- elf_elfheader (stdoutput)->e_flags |= ???;
-#endif
- if (file_ase_mdmx)
+ if (file_ase_micromips)
+ elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_MICROMIPS;
+ if (file_ase & ASE_MDMX)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_MDMX;
/* Set the MIPS ELF ABI flags. */
static procS *cur_proc_ptr;
static int numprocs;
-/* Implement NOP_OPCODE. We encode a MIPS16 nop as "1" and a normal
- nop as "0". */
+/* Implement NOP_OPCODE. We encode a MIPS16 nop as "1", a microMIPS nop
+ as "2", and a normal nop as "0". */
+
+#define NOP_OPCODE_MIPS 0
+#define NOP_OPCODE_MIPS16 1
+#define NOP_OPCODE_MICROMIPS 2
char
mips_nop_opcode (void)
{
- return seg_info (now_seg)->tc_segment_info_data.mips16;
+ if (seg_info (now_seg)->tc_segment_info_data.micromips)
+ return NOP_OPCODE_MICROMIPS;
+ else if (seg_info (now_seg)->tc_segment_info_data.mips16)
+ return NOP_OPCODE_MIPS16;
+ else
+ return NOP_OPCODE_MIPS;
}
-/* Fill in an rs_align_code fragment. This only needs to do something
- for MIPS16 code, where 0 is not a nop. */
+/* Fill in an rs_align_code fragment. Unlike elsewhere we want to use
+ 32-bit microMIPS NOPs here (if applicable). */
void
mips_handle_align (fragS *fragp)
{
+ char nop_opcode;
char *p;
int bytes, size, excess;
valueT opcode;
return;
p = fragp->fr_literal + fragp->fr_fix;
- if (*p)
+ nop_opcode = *p;
+ switch (nop_opcode)
{
+ case NOP_OPCODE_MICROMIPS:
+ opcode = micromips_nop32_insn.insn_opcode;
+ size = 4;
+ break;
+ case NOP_OPCODE_MIPS16:
opcode = mips16_nop_insn.insn_opcode;
size = 2;
- }
- else
- {
+ break;
+ case NOP_OPCODE_MIPS:
+ default:
opcode = nop_insn.insn_opcode;
size = 4;
+ break;
}
bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix;
excess = bytes % size;
- if (excess != 0)
+
+ /* Handle the leading part if we're not inserting a whole number of
+ instructions, and make it the end of the fixed part of the frag.
+ Try to fit in a short microMIPS NOP if applicable and possible,
+ and use zeroes otherwise. */
+ gas_assert (excess < 4);
+ fragp->fr_fix += excess;
+ switch (excess)
{
- /* If we're not inserting a whole number of instructions,
- pad the end of the fixed part of the frag with zeros. */
- memset (p, 0, excess);
- p += excess;
- fragp->fr_fix += excess;
+ case 3:
+ *p++ = '\0';
+ /* Fall through. */
+ case 2:
+ if (nop_opcode == NOP_OPCODE_MICROMIPS)
+ {
+ p = write_compressed_insn (p, micromips_nop16_insn.insn_opcode, 2);
+ break;
+ }
+ *p++ = '\0';
+ /* Fall through. */
+ case 1:
+ *p++ = '\0';
+ /* Fall through. */
+ case 0:
+ break;
}
md_number_to_chars (p, opcode, size);
static const struct mips_cpu_info mips_cpu_info_table[] =
{
/* Entries for generic ISAs */
- { "mips1", MIPS_CPU_IS_ISA, ISA_MIPS1, CPU_R3000 },
- { "mips2", MIPS_CPU_IS_ISA, ISA_MIPS2, CPU_R6000 },
- { "mips3", MIPS_CPU_IS_ISA, ISA_MIPS3, CPU_R4000 },
- { "mips4", MIPS_CPU_IS_ISA, ISA_MIPS4, CPU_R8000 },
- { "mips5", MIPS_CPU_IS_ISA, ISA_MIPS5, CPU_MIPS5 },
- { "mips32", MIPS_CPU_IS_ISA, ISA_MIPS32, CPU_MIPS32 },
- { "mips32r2", MIPS_CPU_IS_ISA, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "mips64", MIPS_CPU_IS_ISA, ISA_MIPS64, CPU_MIPS64 },
- { "mips64r2", MIPS_CPU_IS_ISA, ISA_MIPS64R2, CPU_MIPS64R2 },
+ { "mips1", MIPS_CPU_IS_ISA, 0, ISA_MIPS1, CPU_R3000 },
+ { "mips2", MIPS_CPU_IS_ISA, 0, ISA_MIPS2, CPU_R6000 },
+ { "mips3", MIPS_CPU_IS_ISA, 0, ISA_MIPS3, CPU_R4000 },
+ { "mips4", MIPS_CPU_IS_ISA, 0, ISA_MIPS4, CPU_R8000 },
+ { "mips5", MIPS_CPU_IS_ISA, 0, ISA_MIPS5, CPU_MIPS5 },
+ { "mips32", MIPS_CPU_IS_ISA, 0, ISA_MIPS32, CPU_MIPS32 },
+ { "mips32r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "mips64", MIPS_CPU_IS_ISA, 0, ISA_MIPS64, CPU_MIPS64 },
+ { "mips64r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R2, CPU_MIPS64R2 },
/* MIPS I */
- { "r3000", 0, ISA_MIPS1, CPU_R3000 },
- { "r2000", 0, ISA_MIPS1, CPU_R3000 },
- { "r3900", 0, ISA_MIPS1, CPU_R3900 },
+ { "r3000", 0, 0, ISA_MIPS1, CPU_R3000 },
+ { "r2000", 0, 0, ISA_MIPS1, CPU_R3000 },
+ { "r3900", 0, 0, ISA_MIPS1, CPU_R3900 },
/* MIPS II */
- { "r6000", 0, ISA_MIPS2, CPU_R6000 },
+ { "r6000", 0, 0, ISA_MIPS2, CPU_R6000 },
/* MIPS III */
- { "r4000", 0, ISA_MIPS3, CPU_R4000 },
- { "r4010", 0, ISA_MIPS2, CPU_R4010 },
- { "vr4100", 0, ISA_MIPS3, CPU_VR4100 },
- { "vr4111", 0, ISA_MIPS3, CPU_R4111 },
- { "vr4120", 0, ISA_MIPS3, CPU_VR4120 },
- { "vr4130", 0, ISA_MIPS3, CPU_VR4120 },
- { "vr4181", 0, ISA_MIPS3, CPU_R4111 },
- { "vr4300", 0, ISA_MIPS3, CPU_R4300 },
- { "r4400", 0, ISA_MIPS3, CPU_R4400 },
- { "r4600", 0, ISA_MIPS3, CPU_R4600 },
- { "orion", 0, ISA_MIPS3, CPU_R4600 },
- { "r4650", 0, ISA_MIPS3, CPU_R4650 },
+ { "r4000", 0, 0, ISA_MIPS3, CPU_R4000 },
+ { "r4010", 0, 0, ISA_MIPS2, CPU_R4010 },
+ { "vr4100", 0, 0, ISA_MIPS3, CPU_VR4100 },
+ { "vr4111", 0, 0, ISA_MIPS3, CPU_R4111 },
+ { "vr4120", 0, 0, ISA_MIPS3, CPU_VR4120 },
+ { "vr4130", 0, 0, ISA_MIPS3, CPU_VR4120 },
+ { "vr4181", 0, 0, ISA_MIPS3, CPU_R4111 },
+ { "vr4300", 0, 0, ISA_MIPS3, CPU_R4300 },
+ { "r4400", 0, 0, ISA_MIPS3, CPU_R4400 },
+ { "r4600", 0, 0, ISA_MIPS3, CPU_R4600 },
+ { "orion", 0, 0, ISA_MIPS3, CPU_R4600 },
+ { "r4650", 0, 0, ISA_MIPS3, CPU_R4650 },
+ { "r5900", 0, 0, ISA_MIPS3, CPU_R5900 },
/* ST Microelectronics Loongson 2E and 2F cores */
- { "loongson2e", 0, ISA_MIPS3, CPU_LOONGSON_2E },
- { "loongson2f", 0, ISA_MIPS3, CPU_LOONGSON_2F },
+ { "loongson2e", 0, 0, ISA_MIPS3, CPU_LOONGSON_2E },
+ { "loongson2f", 0, 0, ISA_MIPS3, CPU_LOONGSON_2F },
/* MIPS IV */
- { "r8000", 0, ISA_MIPS4, CPU_R8000 },
- { "r10000", 0, ISA_MIPS4, CPU_R10000 },
- { "r12000", 0, ISA_MIPS4, CPU_R12000 },
- { "r14000", 0, ISA_MIPS4, CPU_R14000 },
- { "r16000", 0, ISA_MIPS4, CPU_R16000 },
- { "vr5000", 0, ISA_MIPS4, CPU_R5000 },
- { "vr5400", 0, ISA_MIPS4, CPU_VR5400 },
- { "vr5500", 0, ISA_MIPS4, CPU_VR5500 },
- { "rm5200", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5230", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5231", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5261", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5721", 0, ISA_MIPS4, CPU_R5000 },
- { "rm7000", 0, ISA_MIPS4, CPU_RM7000 },
- { "rm9000", 0, ISA_MIPS4, CPU_RM9000 },
+ { "r8000", 0, 0, ISA_MIPS4, CPU_R8000 },
+ { "r10000", 0, 0, ISA_MIPS4, CPU_R10000 },
+ { "r12000", 0, 0, ISA_MIPS4, CPU_R12000 },
+ { "r14000", 0, 0, ISA_MIPS4, CPU_R14000 },
+ { "r16000", 0, 0, ISA_MIPS4, CPU_R16000 },
+ { "vr5000", 0, 0, ISA_MIPS4, CPU_R5000 },
+ { "vr5400", 0, 0, ISA_MIPS4, CPU_VR5400 },
+ { "vr5500", 0, 0, ISA_MIPS4, CPU_VR5500 },
+ { "rm5200", 0, 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5230", 0, 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5231", 0, 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5261", 0, 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5721", 0, 0, ISA_MIPS4, CPU_R5000 },
+ { "rm7000", 0, 0, ISA_MIPS4, CPU_RM7000 },
+ { "rm9000", 0, 0, ISA_MIPS4, CPU_RM9000 },
/* MIPS 32 */
- { "4kc", 0, ISA_MIPS32, CPU_MIPS32 },
- { "4km", 0, ISA_MIPS32, CPU_MIPS32 },
- { "4kp", 0, ISA_MIPS32, CPU_MIPS32 },
- { "4ksc", MIPS_CPU_ASE_SMARTMIPS, ISA_MIPS32, CPU_MIPS32 },
+ { "4kc", 0, 0, ISA_MIPS32, CPU_MIPS32 },
+ { "4km", 0, 0, ISA_MIPS32, CPU_MIPS32 },
+ { "4kp", 0, 0, ISA_MIPS32, CPU_MIPS32 },
+ { "4ksc", 0, ASE_SMARTMIPS, ISA_MIPS32, CPU_MIPS32 },
/* MIPS 32 Release 2 */
- { "4kec", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "4kem", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "4kep", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "4ksd", MIPS_CPU_ASE_SMARTMIPS, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "m4k", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "m4kp", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kc", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kf2_1", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kf", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kf1_1", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "4kec", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "4kem", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "4kep", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "4ksd", 0, ASE_SMARTMIPS, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m4k", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m4kp", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m14k", 0, ASE_MCU, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m14kc", 0, ASE_MCU, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m14ke", 0, ASE_DSP | ASE_DSPR2 | ASE_MCU,
+ ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m14kec", 0, ASE_DSP | ASE_DSPR2 | ASE_MCU,
+ ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kc", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kf2_1", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kf", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kf1_1", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
/* Deprecated forms of the above. */
- { "24kfx", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kx", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kfx", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kx", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
/* 24KE is a 24K with DSP ASE, other ASEs are optional. */
- { "24kec", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kef2_1", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kef", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kef1_1", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kec", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kef2_1", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kef", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kef1_1", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
/* Deprecated forms of the above. */
- { "24kefx", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "24kex", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kefx", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kex", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
/* 34K is a 24K with DSP and MT ASE, other ASEs are optional. */
- { "34kc", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "34kf2_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "34kf", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "34kf1_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kc", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kf2_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kf", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
/* Deprecated forms of the above. */
- { "34kfx", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "34kx", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kfx", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kx", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* 34Kn is a 34kc without DSP. */
+ { "34kn", 0, ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
/* 74K with DSP and DSPR2 ASE, other ASEs are optional. */
- { "74kc", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "74kf2_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "74kf", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "74kf1_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "74kf3_2", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
- ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "74kc", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "74kf2_1", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "74kf", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "74kf1_1", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "74kf3_2", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 },
/* Deprecated forms of the above. */
- { "74kfx", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "74kx", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_DSPR2,
- ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "74kfx", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "74kx", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 },
/* 1004K cores are multiprocessor versions of the 34K. */
- { "1004kc", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "1004kf2_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "1004kf", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
- { "1004kf1_1", MIPS_CPU_ASE_DSP | MIPS_CPU_ASE_MT,
- ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "1004kc", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "1004kf2_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "1004kf", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "1004kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
/* MIPS 64 */
- { "5kc", 0, ISA_MIPS64, CPU_MIPS64 },
- { "5kf", 0, ISA_MIPS64, CPU_MIPS64 },
- { "20kc", MIPS_CPU_ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 },
- { "25kf", MIPS_CPU_ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 },
+ { "5kc", 0, 0, ISA_MIPS64, CPU_MIPS64 },
+ { "5kf", 0, 0, ISA_MIPS64, CPU_MIPS64 },
+ { "20kc", 0, ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 },
+ { "25kf", 0, ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 },
/* Broadcom SB-1 CPU core */
- { "sb1", MIPS_CPU_ASE_MIPS3D | MIPS_CPU_ASE_MDMX,
- ISA_MIPS64, CPU_SB1 },
+ { "sb1", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
/* Broadcom SB-1A CPU core */
- { "sb1a", MIPS_CPU_ASE_MIPS3D | MIPS_CPU_ASE_MDMX,
- ISA_MIPS64, CPU_SB1 },
+ { "sb1a", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
- { "loongson3a", 0, ISA_MIPS64, CPU_LOONGSON_3A },
+ { "loongson3a", 0, 0, ISA_MIPS64, CPU_LOONGSON_3A },
/* MIPS 64 Release 2 */
/* Cavium Networks Octeon CPU core */
- { "octeon", 0, ISA_MIPS64R2, CPU_OCTEON },
+ { "octeon", 0, 0, ISA_MIPS64R2, CPU_OCTEON },
+ { "octeon+", 0, 0, ISA_MIPS64R2, CPU_OCTEONP },
+ { "octeon2", 0, 0, ISA_MIPS64R2, CPU_OCTEON2 },
/* RMI Xlr */
- { "xlr", 0, ISA_MIPS64, CPU_XLR },
+ { "xlr", 0, 0, ISA_MIPS64, CPU_XLR },
+
+ /* Broadcom XLP.
+ XLP is mostly like XLR, with the prominent exception that it is
+ MIPS64R2 rather than MIPS64. */
+ { "xlp", 0, 0, ISA_MIPS64R2, CPU_XLR },
/* End marker */
- { NULL, 0, 0, 0 }
+ { NULL, 0, 0, 0, 0 }
};
-mips16 generate mips16 instructions\n\
-no-mips16 do not generate mips16 instructions\n"));
fprintf (stream, _("\
+-mmicromips generate microMIPS instructions\n\
+-mno-micromips do not generate microMIPS instructions\n"));
+ fprintf (stream, _("\
-msmartmips generate smartmips instructions\n\
-mno-smartmips do not generate smartmips instructions\n"));
fprintf (stream, _("\
-mmt generate MT instructions\n\
-mno-mt do not generate MT instructions\n"));
fprintf (stream, _("\
+-mmcu generate MCU instructions\n\
+-mno-mcu do not generate MCU instructions\n"));
+ fprintf (stream, _("\
+-mvirt generate Virtualization instructions\n\
+-mno-virt do not generate Virtualization instructions\n"));
+ fprintf (stream, _("\
-mfix-loongson2f-jump work around Loongson2F JUMP instructions\n\
-mfix-loongson2f-nop work around Loongson2F NOP errata\n\
-mfix-vr4120 work around certain VR4120 errata\n\
-msoft-float do not allow floating-point instructions\n\
-msingle-float only allow 32-bit floating-point operations\n\
-mdouble-float allow 32-bit and 64-bit floating-point operations\n\
---[no-]construct-floats [dis]allow floating point values to be constructed\n"
+--[no-]construct-floats [dis]allow floating point values to be constructed\n\
+--[no-]relax-branch [dis]allow out-of-range branches to be relaxed\n"
));
#ifdef OBJ_ELF
fprintf (stream, _("\