int arch;
/* True if ".set sym32" is in effect. */
bfd_boolean sym32;
+ /* True if floating-point operations are not allowed. Changed by .set
+ softfloat or .set hardfloat, by command line options -msoft-float or
+ -mhard-float. The default is false. */
+ bfd_boolean soft_float;
+
+ /* True if only single-precision floating-point operations are allowed.
+ Changed by .set singlefloat or .set doublefloat, command-line options
+ -msingle-float or -mdouble-float. The default is false. */
+ bfd_boolean single_float;
};
+/* This is the struct we use to hold the current set of options. Note
+ that we must set the isa field to ISA_UNKNOWN and the ASE fields to
+ -1 to indicate that they have not been initialized. */
+
/* True if -mgp32 was passed. */
static int file_mips_gp32 = -1;
/* True if -mfp32 was passed. */
static int file_mips_fp32 = -1;
-/* This is the struct we use to hold the current set of options. Note
- that we must set the isa field to ISA_UNKNOWN and the ASE fields to
- -1 to indicate that they have not been initialized. */
+/* 1 if -msoft-float, 0 if -mhard-float. The default is 0. */
+static int file_mips_soft_float = 0;
+
+/* 1 if -msingle-float, 0 if -mdouble-float. The default is 0. */
+static int file_mips_single_float = 0;
static struct mips_set_options mips_opts =
{
- ISA_UNKNOWN, -1, -1, 0, -1, -1, -1, -1, 0, ATREG, 0, 0, 0, 0, 0, 0, CPU_UNKNOWN, FALSE
+ /* isa */ ISA_UNKNOWN, /* ase_mips3d */ -1, /* ase_mdmx */ -1,
+ /* ase_smartmips */ 0, /* ase_dsp */ -1, /* ase_dspr2 */ -1, /* ase_mt */ -1,
+ /* mips16 */ -1, /* noreorder */ 0, /* at */ ATREG,
+ /* warn_about_macros */ 0, /* nomove */ 0, /* nobopt */ 0,
+ /* noautoextend */ 0, /* gp32 */ 0, /* fp32 */ 0, /* arch */ CPU_UNKNOWN,
+ /* sym32 */ FALSE, /* soft_float */ FALSE, /* single_float */ FALSE
};
/* These variables are filled in with the masks of registers used.
return reg >= 0;
}
+/* Return TRUE if opcode MO is valid on the currently selected ISA and
+ architecture. If EXPANSIONP is TRUE then this check is done while
+ expanding a macro. Use is_opcode_valid_16 for MIPS16 opcodes. */
+
+static bfd_boolean
+is_opcode_valid (const struct mips_opcode *mo, bfd_boolean expansionp)
+{
+ int isa = mips_opts.isa;
+ int fp_s, fp_d;
+
+ if (mips_opts.ase_mdmx)
+ isa |= INSN_MDMX;
+ if (mips_opts.ase_dsp)
+ isa |= INSN_DSP;
+ if (mips_opts.ase_dsp && ISA_SUPPORTS_DSP64_ASE)
+ isa |= INSN_DSP64;
+ if (mips_opts.ase_dspr2)
+ isa |= INSN_DSPR2;
+ if (mips_opts.ase_mt)
+ isa |= INSN_MT;
+ if (mips_opts.ase_mips3d)
+ isa |= INSN_MIPS3D;
+ if (mips_opts.ase_smartmips)
+ isa |= INSN_SMARTMIPS;
+
+ /* For user code we don't check for mips_opts.mips16 since we want
+ to allow jalx if -mips16 was specified on the command line. */
+ if (expansionp ? mips_opts.mips16 : file_ase_mips16)
+ isa |= INSN_MIPS16;
+
+ if (!OPCODE_IS_MEMBER (mo, isa, mips_opts.arch))
+ return FALSE;
+
+ /* Check whether the instruction or macro requires single-precision or
+ double-precision floating-point support. Note that this information is
+ stored differently in the opcode table for insns and macros. */
+ if (mo->pinfo == INSN_MACRO)
+ {
+ fp_s = mo->pinfo2 & INSN2_M_FP_S;
+ fp_d = mo->pinfo2 & INSN2_M_FP_D;
+ }
+ else
+ {
+ fp_s = mo->pinfo & FP_S;
+ fp_d = mo->pinfo & FP_D;
+ }
+
+ if (fp_d && (mips_opts.soft_float || mips_opts.single_float))
+ return FALSE;
+
+ if (fp_s && mips_opts.soft_float)
+ return FALSE;
+
+ return TRUE;
+}
+
+/* Return TRUE if the MIPS16 opcode MO is valid on the currently
+ selected ISA and architecture. */
+
+static bfd_boolean
+is_opcode_valid_16 (const struct mips_opcode *mo)
+{
+ return OPCODE_IS_MEMBER (mo, mips_opts.isa, mips_opts.arch) ? TRUE : FALSE;
+}
+
/* This function is called once, at assembler startup time. It should set up
all the tables, etc. that the MD part of the assembler will need. */
macros will never generate MDMX, MIPS-3D, or MT instructions. */
if (strcmp (fmt, mo->args) == 0
&& mo->pinfo != INSN_MACRO
- && OPCODE_IS_MEMBER (mo,
- (mips_opts.isa
- | (mips_opts.mips16 ? INSN_MIPS16 : 0)
- | (mips_opts.ase_dsp ? INSN_DSP : 0)
- | ((mips_opts.ase_dsp && ISA_SUPPORTS_DSP64_ASE)
- ? INSN_DSP64 : 0)
- | (mips_opts.ase_dspr2 ? INSN_DSPR2 : 0)
- | (mips_opts.ase_smartmips ? INSN_SMARTMIPS : 0)),
- mips_opts.arch)
- && (mips_opts.arch != CPU_R4650 || (mo->pinfo & FP_D) == 0))
+ && is_opcode_valid (mo, TRUE))
break;
++mo;
lr = 1;
goto ld;
case M_LDC1_AB:
- if (mips_opts.arch == CPU_R4650)
- {
- as_bad (_("opcode not supported on this processor"));
- break;
- }
s = "ldc1";
/* Itbl support may require additional care here. */
coproc = 1;
s = "cache";
goto st;
case M_SDC1_AB:
- if (mips_opts.arch == CPU_R4650)
- {
- as_bad (_("opcode not supported on this processor"));
- break;
- }
s = "sdc1";
coproc = 1;
/* Itbl support may require additional care here. */
}
case M_L_DOB:
- if (mips_opts.arch == CPU_R4650)
- {
- as_bad (_("opcode not supported on this processor"));
- break;
- }
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when loading from memory. */
r = BFD_RELOC_LO16;
* But, the resulting address is the same after relocation so why
* generate the extra instruction?
*/
- if (mips_opts.arch == CPU_R4650)
- {
- as_bad (_("opcode not supported on this processor"));
- break;
- }
/* Itbl support may require additional care here. */
coproc = 1;
if (mips_opts.isa != ISA_MIPS1)
goto ldd_std;
case M_S_DAB:
- if (mips_opts.arch == CPU_R4650)
- {
- as_bad (_("opcode not supported on this processor"));
- break;
- }
-
if (mips_opts.isa != ISA_MIPS1)
{
s = "sdc1";
break;
case M_S_DOB:
- if (mips_opts.arch == CPU_R4650)
- {
- as_bad (_("opcode not supported on this processor"));
- break;
- }
assert (mips_opts.isa == ISA_MIPS1);
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when storing to memory. */
assert (strcmp (insn->name, str) == 0);
- if (OPCODE_IS_MEMBER (insn,
- (mips_opts.isa
- /* We don't check for mips_opts.mips16 here since
- we want to allow jalx if -mips16 was specified
- on the command line. */
- | (file_ase_mips16 ? INSN_MIPS16 : 0)
- | (mips_opts.ase_mdmx ? INSN_MDMX : 0)
- | (mips_opts.ase_dsp ? INSN_DSP : 0)
- | ((mips_opts.ase_dsp && ISA_SUPPORTS_DSP64_ASE)
- ? INSN_DSP64 : 0)
- | (mips_opts.ase_dspr2 ? INSN_DSPR2 : 0)
- | (mips_opts.ase_mt ? INSN_MT : 0)
- | (mips_opts.ase_mips3d ? INSN_MIPS3D : 0)
- | (mips_opts.ase_smartmips ? INSN_SMARTMIPS : 0)),
- mips_opts.arch))
- ok = TRUE;
- else
- ok = FALSE;
-
- if (insn->pinfo != INSN_MACRO)
- {
- if (mips_opts.arch == CPU_R4650 && (insn->pinfo & FP_D) != 0)
- ok = FALSE;
- }
-
+ ok = is_opcode_valid (insn, FALSE);
if (! ok)
{
if (insn + 1 < &mips_opcodes[NUMOPCODES]
assert (strcmp (insn->name, str) == 0);
- if (OPCODE_IS_MEMBER (insn, mips_opts.isa, mips_opts.arch))
- ok = TRUE;
- else
- ok = FALSE;
-
+ ok = is_opcode_valid_16 (insn);
if (! ok)
{
if (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes]
#define OPTION_MNO_SYM32 (OPTION_MISC_BASE + 15)
{"msym32", no_argument, NULL, OPTION_MSYM32},
{"mno-sym32", no_argument, NULL, OPTION_MNO_SYM32},
-
+#define OPTION_SOFT_FLOAT (OPTION_MISC_BASE + 16)
+#define OPTION_HARD_FLOAT (OPTION_MISC_BASE + 17)
+ {"msoft-float", no_argument, NULL, OPTION_SOFT_FLOAT},
+ {"mhard-float", no_argument, NULL, OPTION_HARD_FLOAT},
+#define OPTION_SINGLE_FLOAT (OPTION_MISC_BASE + 18)
+#define OPTION_DOUBLE_FLOAT (OPTION_MISC_BASE + 19)
+ {"msingle-float", no_argument, NULL, OPTION_SINGLE_FLOAT},
+ {"mdouble-float", no_argument, NULL, OPTION_DOUBLE_FLOAT},
+
/* ELF-specific options. */
#ifdef OBJ_ELF
-#define OPTION_ELF_BASE (OPTION_MISC_BASE + 16)
+#define OPTION_ELF_BASE (OPTION_MISC_BASE + 20)
#define OPTION_CALL_SHARED (OPTION_ELF_BASE + 0)
{"KPIC", no_argument, NULL, OPTION_CALL_SHARED},
{"call_shared", no_argument, NULL, OPTION_CALL_SHARED},
file_mips_fp32 = 0;
break;
+ case OPTION_SINGLE_FLOAT:
+ file_mips_single_float = 1;
+ break;
+
+ case OPTION_DOUBLE_FLOAT:
+ file_mips_single_float = 0;
+ break;
+
+ case OPTION_SOFT_FLOAT:
+ file_mips_soft_float = 1;
+ break;
+
+ case OPTION_HARD_FLOAT:
+ file_mips_soft_float = 0;
+ break;
+
#ifdef OBJ_ELF
case OPTION_MABI:
if (!IS_ELF)
file_ase_mt = mips_opts.ase_mt;
mips_opts.gp32 = file_mips_gp32;
mips_opts.fp32 = file_mips_fp32;
+ mips_opts.soft_float = file_mips_soft_float;
+ mips_opts.single_float = file_mips_single_float;
if (mips_flag_mdebug < 0)
{
mips_cpu_info_from_isa (mips_opts.isa)->name);
mips_opts.fp32 = 0;
}
+ else if (strcmp (name, "softfloat") == 0)
+ mips_opts.soft_float = 1;
+ else if (strcmp (name, "hardfloat") == 0)
+ mips_opts.soft_float = 0;
+ else if (strcmp (name, "singlefloat") == 0)
+ mips_opts.single_float = 1;
+ else if (strcmp (name, "doublefloat") == 0)
+ mips_opts.single_float = 0;
else if (strcmp (name, "mips16") == 0
|| strcmp (name, "MIPS-16") == 0)
mips_opts.mips16 = 1;
-msym32 assume all symbols have 32-bit values\n\
-O0 remove unneeded NOPs, do not swap branches\n\
-O remove unneeded NOPs and swap branches\n\
---[no-]construct-floats [dis]allow floating point values to be constructed\n\
--trap, --no-break trap exception on div by 0 and mult overflow\n\
--break, --no-trap break exception on div by 0 and mult overflow\n"));
+ fprintf (stream, _("\
+-mhard-float allow floating-point instructions\n\
+-msoft-float do not allow floating-point instructions\n\
+-msingle-float only allow 32-bit floating-point operations\n\
+-mdouble-float allow 32-bit and 64-bit floating-point operations\n\
+--[no-]construct-floats [dis]allow floating point values to be constructed\n"
+ ));
#ifdef OBJ_ELF
fprintf (stream, _("\
-KPIC, -call_shared generate SVR4 position independent code\n\
projects / deliverable / binutils-gdb.git / blobdiff