/* tc-mips.c -- assemble code for a MIPS chip.
- Copyright (C) 1993-2015 Free Software Foundation, Inc.
+ Copyright (C) 1993-2016 Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus
static void mips_ip (char *str, struct mips_cl_insn * ip);
static void mips16_ip (char *str, struct mips_cl_insn * ip);
static void mips16_immed
- (char *, unsigned int, int, bfd_reloc_code_real_type, offsetT,
+ (const char *, unsigned int, int, bfd_reloc_code_real_type, offsetT,
unsigned int, unsigned long *);
static size_t my_getSmallExpression
(expressionS *, bfd_reloc_code_real_type *, char *);
{
for (pl = &free_insn_labels; *pl != NULL; pl = &(*pl)->next)
;
-
+
si = seg_info (now_seg);
*pl = si->label_list;
si->label_list = NULL;
}
/* Return the length of a microMIPS instruction in bytes. If bits of
- the mask beyond the low 16 are 0, then it is a 16-bit instruction.
- Otherwise assume a 32-bit instruction; 48-bit instructions (0x1f
- major opcode) will require further modifications to the opcode
- table. */
+ the mask beyond the low 16 are 0, then it is a 16-bit instruction,
+ otherwise it is a 32-bit instruction. */
static inline unsigned int
micromips_insn_length (const struct mips_opcode *mo)
{"$28", RTYPE_NUM | 28}, \
{"$29", RTYPE_NUM | 29}, \
{"$30", RTYPE_NUM | 30}, \
- {"$31", RTYPE_NUM | 31}
+ {"$31", RTYPE_NUM | 31}
#define FPU_REGISTER_NAMES \
{"$f0", RTYPE_FPU | 0}, \
{"$ta0", RTYPE_GP | 12}, /* alias for $t4 */ \
{"$ta1", RTYPE_GP | 13}, /* alias for $t5 */ \
{"$ta2", RTYPE_GP | 14}, /* alias for $t6 */ \
- {"$ta3", RTYPE_GP | 15} /* alias for $t7 */
+ {"$ta3", RTYPE_GP | 15} /* alias for $t7 */
/* Remaining symbolic register names */
#define SYMBOLIC_REGISTER_NAMES \
/* The $txx registers depends on the abi,
these will be added later into the symbol table from
- one of the tables below once mips_abi is set after
+ one of the tables below once mips_abi is set after
parsing of arguments from the command line. */
SYMBOLIC_REGISTER_NAMES,
as_bad (_("-G may not be used in position-independent code"));
g_switch_value = 0;
}
+ else if (mips_abicalls)
+ {
+ if (g_switch_seen && g_switch_value != 0)
+ as_bad (_("-G may not be used with abicalls"));
+ g_switch_value = 0;
+ }
if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_opts.arch))
as_warn (_("could not set architecture and machine"));
/* We add all the general register names to the symbol table. This
helps us detect invalid uses of them. */
- for (i = 0; reg_names[i].name; i++)
+ for (i = 0; reg_names[i].name; i++)
symbol_table_insert (symbol_new (reg_names[i].name, reg_section,
reg_names[i].num, /* & RNUM_MASK, */
&zero_address_frag));
if (HAVE_NEWABI)
- for (i = 0; reg_names_n32n64[i].name; i++)
+ for (i = 0; reg_names_n32n64[i].name; i++)
symbol_table_insert (symbol_new (reg_names_n32n64[i].name, reg_section,
reg_names_n32n64[i].num, /* & RNUM_MASK, */
&zero_address_frag));
else
- for (i = 0; reg_names_o32[i].name; i++)
+ for (i = 0; reg_names_o32[i].name; i++)
symbol_table_insert (symbol_new (reg_names_o32[i].name, reg_section,
reg_names_o32[i].num, /* & RNUM_MASK, */
&zero_address_frag));
Tag_GNU_MIPS_ABI_FP, fpabi);
break;
+ case Val_GNU_MIPS_ABI_FP_NAN2008:
+ /* Silently ignore compatibility value. */
+ break;
+
default:
as_warn (_(".gnu_attribute %d,%d is not a recognized"
" floating-point ABI"), Tag_GNU_MIPS_ABI_FP, fpabi);
* Run the data cache in write-through mode.
* Insert a non-store instruction between
Store A and Store B or Store B and Store C. */
-
+
static int
nops_for_24k (int ignore, const struct mips_cl_insn *hist,
const struct mips_cl_insn *insn)
&& !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
macro_build (NULL, "move", "mp,mj", dest, source);
else
- macro_build (NULL, GPR_SIZE == 32 ? "addu" : "daddu", "d,v,t",
- dest, source, 0);
+ macro_build (NULL, "or", "d,v,t", dest, source, 0);
}
/* Emit an SVR4 PIC sequence to load address LOCAL into DEST, where
abort ();
break;
-
+
case M_SAA_AB:
s = "saa";
goto saa_saad;
is the length that the user requested, or 0 if none. */
static void
-mips16_immed (char *file, unsigned int line, int type,
+mips16_immed (const char *file, unsigned int line, int type,
bfd_reloc_code_real_type reloc, offsetT val,
unsigned int user_insn_length, unsigned long *insn)
{
|| fixP->fx_r_type == BFD_RELOC_MICROMIPS_SUB
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY
- || fixP->fx_r_type == BFD_RELOC_MIPS_TLS_DTPREL64);
+ || fixP->fx_r_type == BFD_RELOC_MIPS_TLS_DTPREL64
+ || fixP->fx_r_type == BFD_RELOC_NONE);
buf = fixP->fx_frag->fr_literal + fixP->fx_where;
S_SET_WEAK (fixP->fx_addsy);
break;
+ case BFD_RELOC_NONE:
case BFD_RELOC_VTABLE_ENTRY:
fixP->fx_done = 0;
break;
char *name;
symbolS *p;
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
p = (symbolS *) symbol_find_or_make (name);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
return p;
}
void
s_change_section (int ignore ATTRIBUTE_UNUSED)
{
+ char *saved_ilp;
char *section_name;
- char c;
+ char c, endc;
char next_c = 0;
int section_type;
int section_flag;
int section_entry_size;
int section_alignment;
- section_name = input_line_pointer;
- c = get_symbol_end ();
+ saved_ilp = input_line_pointer;
+ endc = get_symbol_name (§ion_name);
+ c = (endc == '"' ? input_line_pointer[1] : endc);
if (c)
- next_c = *(input_line_pointer + 1);
+ next_c = input_line_pointer [(endc == '"' ? 2 : 1)];
/* Do we have .section Name<,"flags">? */
if (c != ',' || (c == ',' && next_c == '"'))
{
- /* just after name is now '\0'. */
- *input_line_pointer = c;
- input_line_pointer = section_name;
+ /* Just after name is now '\0'. */
+ (void) restore_line_pointer (endc);
+ input_line_pointer = saved_ilp;
obj_elf_section (ignore);
return;
}
+
+ section_name = xstrdup (section_name);
+ c = restore_line_pointer (endc);
+
input_line_pointer++;
/* Do we have .section Name<,type><,flag><,entry_size><,alignment> */
section_type = get_absolute_expression ();
else
section_type = 0;
+
if (*input_line_pointer++ == ',')
section_flag = get_absolute_expression ();
else
section_flag = 0;
+
if (*input_line_pointer++ == ',')
section_entry_size = get_absolute_expression ();
else
section_entry_size = 0;
+
if (*input_line_pointer++ == ',')
section_alignment = get_absolute_expression ();
else
section_alignment = 0;
+
/* FIXME: really ignore? */
(void) section_alignment;
- section_name = xstrdup (section_name);
-
/* When using the generic form of .section (as implemented by obj-elf.c),
there's no way to set the section type to SHT_MIPS_DWARF. Users have
traditionally had to fall back on the more common @progbits instead.
do
{
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
symbolP = symbol_find_or_make (name);
S_SET_EXTERNAL (symbolP);
*input_line_pointer = c;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE_AFTER_NAME ();
/* On Irix 5, every global symbol that is not explicitly labelled as
being a function is apparently labelled as being an object. */
char *secname;
asection *sec;
- secname = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&secname);
sec = bfd_get_section_by_name (stdoutput, secname);
if (sec == NULL)
as_bad (_("%s: no such section"), secname);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
if (sec != NULL && (sec->flags & SEC_CODE) != 0)
flag = BSF_FUNCTION;
char *opt;
char c;
- opt = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&opt);
if (*opt == 'O')
{
else
as_warn (_("unrecognized option \"%s\""), opt);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
demand_empty_rest_of_line ();
}
daddu $gp, $gp, $reg1
If $reg2 is given, this results in:
- daddu $reg2, $gp, $0
+ or $reg2, $gp, $0
lui $gp, %hi(%neg(%gp_rel(label)))
addiu $gp, $gp, %lo(%neg(%gp_rel(label)))
daddu $gp, $gp, $reg1
BFD_RELOC_LO16, SP);
}
else
- macro_build (NULL, "daddu", "d,v,t", mips_cpreturn_register,
- mips_gp_register, 0);
+ move_register (mips_cpreturn_register, mips_gp_register);
if (mips_in_shared || HAVE_64BIT_SYMBOLS)
{
ld $gp, offset($sp)
If a register $reg2 was given there, it results in:
- daddu $gp, $reg2, $0 */
+ or $gp, $reg2, $0 */
static void
s_cpreturn (int ignore ATTRIBUTE_UNUSED)
macro_build (&ex, "ld", "t,o(b)", mips_gp_register, BFD_RELOC_LO16, SP);
}
else
- macro_build (NULL, "daddu", "d,v,t", mips_gp_register,
- mips_cpreturn_register, 0);
+ move_register (mips_gp_register, mips_cpreturn_register);
+
macro_end ();
mips_assembling_insn = FALSE;
p = frag_more (4);
md_number_to_chars (p, 0, 4);
fix_new_exp (frag_now, p - frag_now->fr_literal, 4, &ex, FALSE,
- BFD_RELOC_MIPS_EH);
+ BFD_RELOC_32_PCREL);
demand_empty_rest_of_line ();
}
symbolS *symbolP;
expressionS exp;
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
symbolP = symbol_find_or_make (name);
S_SET_WEAK (symbolP);
*input_line_pointer = c;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE_AFTER_NAME ();
if (! is_end_of_line[(unsigned char) *input_line_pointer])
{
if (align > 4)
align = 4;
- return ((addr + (1 << align) - 1) & (-1 << align));
+ return ((addr + (1 << align) - 1) & -(1 << align));
}
/* Utility routine, called from above as well. If called while the
if (fixp->fx_addsy == NULL)
return 1;
+ /* Allow relocs used for EH tables. */
+ if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
+ return 1;
+
/* If symbol SYM is in a mergeable section, relocations of the form
SYM + 0 can usually be made section-relative. The mergeable data
is then identified by the section offset rather than by the symbol.
{ "1004kf2_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
{ "1004kf", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
{ "1004kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* interaptiv is the new name for 1004kf */
+ { "interaptiv", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* M5100 family */
+ { "m5100", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
+ { "m5101", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
/* P5600 with EVA and Virtualization ASEs, other ASEs are optional. */
{ "p5600", 0, ASE_VIRT | ASE_EVA | ASE_XPA, ISA_MIPS32R5, CPU_MIPS32R5 },
{ "sb1", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
/* Broadcom SB-1A CPU core */
{ "sb1a", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
-
+
{ "loongson3a", 0, 0, ISA_MIPS64R2, CPU_LOONGSON_3A },
/* MIPS 64 Release 2 */
-mno-micromips do not generate microMIPS instructions\n"));
fprintf (stream, _("\
-msmartmips generate smartmips instructions\n\
--mno-smartmips do not generate smartmips instructions\n"));
+-mno-smartmips do not generate smartmips instructions\n"));
fprintf (stream, _("\
-mdsp generate DSP instructions\n\
-mno-dsp do not generate DSP instructions\n"));
Tag_GNU_MIPS_ABI_FP, fpabi);
}
}
+
+/* Returns the relocation type required for a particular CFI encoding. */
+
+bfd_reloc_code_real_type
+mips_cfi_reloc_for_encoding (int encoding)
+{
+ if (encoding == (DW_EH_PE_sdata4 | DW_EH_PE_pcrel))
+ return BFD_RELOC_32_PCREL;
+ else return BFD_RELOC_NONE;
+}
projects / deliverable / binutils-gdb.git / blobdiff