/* tc-mips.c -- assemble code for a MIPS chip.
- Copyright (C) 1993-2014 Free Software Foundation, Inc.
+ Copyright (C) 1993-2016 Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus
#include "ecoff.h"
static char *mips_regmask_frag;
+static char *mips_flags_frag;
#define ZERO 0
#define ATREG 1
Changed by .set singlefloat or .set doublefloat, command-line options
-msingle-float or -mdouble-float. The default is false. */
bfd_boolean single_float;
+
+ /* 1 if single-precision operations on odd-numbered registers are
+ allowed. */
+ int oddspreg;
};
/* Specifies whether module level options have been checked yet. */
static bfd_boolean file_mips_opts_checked = FALSE;
-/* True if -mnan=2008, false if -mnan=legacy. */
-static bfd_boolean mips_flag_nan2008 = FALSE;
+/* Do we support nan2008? 0 if we don't, 1 if we do, and -1 if the
+ value has not been initialized. Changed by `.nan legacy' and
+ `.nan 2008', and the -mnan=legacy and -mnan=2008 command line
+ options, and the default CPU. */
+static int mips_nan2008 = -1;
/* This is the struct we use to hold the module level set of options.
Note that we must set the isa field to ISA_UNKNOWN and the ASE, gp and
/* noreorder */ 0, /* at */ ATREG, /* warn_about_macros */ 0,
/* nomove */ 0, /* nobopt */ 0, /* noautoextend */ 0, /* insn32 */ FALSE,
/* gp */ -1, /* fp */ -1, /* arch */ CPU_UNKNOWN, /* sym32 */ FALSE,
- /* soft_float */ FALSE, /* single_float */ FALSE
+ /* soft_float */ FALSE, /* single_float */ FALSE, /* oddspreg */ -1
};
/* This is similar to file_mips_opts, but for the current set of options. */
/* noreorder */ 0, /* at */ ATREG, /* warn_about_macros */ 0,
/* nomove */ 0, /* nobopt */ 0, /* noautoextend */ 0, /* insn32 */ FALSE,
/* gp */ -1, /* fp */ -1, /* arch */ CPU_UNKNOWN, /* sym32 */ FALSE,
- /* soft_float */ FALSE, /* single_float */ FALSE
+ /* soft_float */ FALSE, /* single_float */ FALSE, /* oddspreg */ -1
};
/* Which bits of file_ase were explicitly set or cleared by ASE options. */
|| (ABI) == N64_ABI \
|| (ABI) == O64_ABI)
+#define ISA_IS_R6(ISA) \
+ ((ISA) == ISA_MIPS32R6 \
+ || (ISA) == ISA_MIPS64R6)
+
/* Return true if ISA supports 64 bit wide gp registers. */
#define ISA_HAS_64BIT_REGS(ISA) \
((ISA) == ISA_MIPS3 \
|| (ISA) == ISA_MIPS64 \
|| (ISA) == ISA_MIPS64R2 \
|| (ISA) == ISA_MIPS64R3 \
- || (ISA) == ISA_MIPS64R5)
+ || (ISA) == ISA_MIPS64R5 \
+ || (ISA) == ISA_MIPS64R6)
/* Return true if ISA supports 64 bit wide float registers. */
#define ISA_HAS_64BIT_FPRS(ISA) \
|| (ISA) == ISA_MIPS32R2 \
|| (ISA) == ISA_MIPS32R3 \
|| (ISA) == ISA_MIPS32R5 \
+ || (ISA) == ISA_MIPS32R6 \
|| (ISA) == ISA_MIPS64 \
|| (ISA) == ISA_MIPS64R2 \
|| (ISA) == ISA_MIPS64R3 \
- || (ISA) == ISA_MIPS64R5 )
+ || (ISA) == ISA_MIPS64R5 \
+ || (ISA) == ISA_MIPS64R6)
/* Return true if ISA supports 64-bit right rotate (dror et al.)
instructions. */
((ISA) == ISA_MIPS64R2 \
|| (ISA) == ISA_MIPS64R3 \
|| (ISA) == ISA_MIPS64R5 \
+ || (ISA) == ISA_MIPS64R6 \
|| (mips_opts.micromips \
&& ISA_HAS_64BIT_REGS (ISA)) \
)
((ISA) == ISA_MIPS32R2 \
|| (ISA) == ISA_MIPS32R3 \
|| (ISA) == ISA_MIPS32R5 \
+ || (ISA) == ISA_MIPS32R6 \
|| (ISA) == ISA_MIPS64R2 \
|| (ISA) == ISA_MIPS64R3 \
|| (ISA) == ISA_MIPS64R5 \
+ || (ISA) == ISA_MIPS64R6 \
|| (mips_opts.ase & ASE_SMARTMIPS) \
|| mips_opts.micromips \
)
/* Return true if ISA supports single-precision floats in odd registers. */
-#define ISA_HAS_ODD_SINGLE_FPR(ISA) \
- ((ISA) == ISA_MIPS32 \
- || (ISA) == ISA_MIPS32R2 \
- || (ISA) == ISA_MIPS32R3 \
- || (ISA) == ISA_MIPS32R5 \
- || (ISA) == ISA_MIPS64 \
- || (ISA) == ISA_MIPS64R2 \
- || (ISA) == ISA_MIPS64R3 \
- || (ISA) == ISA_MIPS64R5)
+#define ISA_HAS_ODD_SINGLE_FPR(ISA, CPU)\
+ (((ISA) == ISA_MIPS32 \
+ || (ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS32R3 \
+ || (ISA) == ISA_MIPS32R5 \
+ || (ISA) == ISA_MIPS32R6 \
+ || (ISA) == ISA_MIPS64 \
+ || (ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5 \
+ || (ISA) == ISA_MIPS64R6 \
+ || (CPU) == CPU_R5900) \
+ && (CPU) != CPU_LOONGSON_3A)
/* Return true if ISA supports move to/from high part of a 64-bit
floating-point register. */
((ISA) == ISA_MIPS32R2 \
|| (ISA) == ISA_MIPS32R3 \
|| (ISA) == ISA_MIPS32R5 \
+ || (ISA) == ISA_MIPS32R6 \
+ || (ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5 \
+ || (ISA) == ISA_MIPS64R6)
+
+/* Return true if ISA supports legacy NAN. */
+#define ISA_HAS_LEGACY_NAN(ISA) \
+ ((ISA) == ISA_MIPS1 \
+ || (ISA) == ISA_MIPS2 \
+ || (ISA) == ISA_MIPS3 \
+ || (ISA) == ISA_MIPS4 \
+ || (ISA) == ISA_MIPS5 \
+ || (ISA) == ISA_MIPS32 \
+ || (ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS32R3 \
+ || (ISA) == ISA_MIPS32R5 \
+ || (ISA) == ISA_MIPS64 \
|| (ISA) == ISA_MIPS64R2 \
|| (ISA) == ISA_MIPS64R3 \
|| (ISA) == ISA_MIPS64R5)
#define CPU_HAS_ROR(CPU) CPU_HAS_DROR (CPU)
/* True if CPU is in the Octeon family */
-#define CPU_IS_OCTEON(CPU) ((CPU) == CPU_OCTEON || (CPU) == CPU_OCTEONP || (CPU) == CPU_OCTEON2)
+#define CPU_IS_OCTEON(CPU) ((CPU) == CPU_OCTEON || (CPU) == CPU_OCTEONP \
+ || (CPU) == CPU_OCTEON2 || (CPU) == CPU_OCTEON3)
/* True if CPU has seq/sne and seqi/snei instructions. */
#define CPU_HAS_SEQ(CPU) (CPU_IS_OCTEON (CPU))
|| mips_opts.isa == ISA_MIPS32R2 \
|| mips_opts.isa == ISA_MIPS32R3 \
|| mips_opts.isa == ISA_MIPS32R5 \
+ || mips_opts.isa == ISA_MIPS32R6 \
|| mips_opts.isa == ISA_MIPS64 \
|| mips_opts.isa == ISA_MIPS64R2 \
|| mips_opts.isa == ISA_MIPS64R3 \
|| mips_opts.isa == ISA_MIPS64R5 \
+ || mips_opts.isa == ISA_MIPS64R6 \
|| mips_opts.arch == CPU_R4010 \
|| mips_opts.arch == CPU_R5900 \
|| mips_opts.arch == CPU_R10000 \
/* Whether the processor uses hardware interlocks to avoid delays
required by coprocessor instructions, and thus does not require
nops to be inserted. This applies to instructions marked
- INSN_LOAD_COPROC_DELAY, INSN_COPROC_MOVE_DELAY, and to delays
- between instructions marked INSN_WRITE_COND_CODE and ones marked
+ INSN_LOAD_COPROC, INSN_COPROC_MOVE, and to delays between
+ instructions marked INSN_WRITE_COND_CODE and ones marked
INSN_READ_COND_CODE. These nops are only required at MIPS ISA
levels I, II, and III and microMIPS mode instructions are always
interlocked. */
static void mips_ip (char *str, struct mips_cl_insn * ip);
static void mips16_ip (char *str, struct mips_cl_insn * ip);
static void mips16_immed
- (char *, unsigned int, int, bfd_reloc_code_real_type, offsetT,
+ (const char *, unsigned int, int, bfd_reloc_code_real_type, offsetT,
unsigned int, unsigned long *);
static size_t my_getSmallExpression
(expressionS *, bfd_reloc_code_real_type *, char *);
OPTION_MIPS32R2,
OPTION_MIPS32R3,
OPTION_MIPS32R5,
+ OPTION_MIPS32R6,
OPTION_MIPS64R2,
OPTION_MIPS64R3,
OPTION_MIPS64R5,
+ OPTION_MIPS64R6,
OPTION_MIPS16,
OPTION_NO_MIPS16,
OPTION_MIPS3D,
OPTION_CONSTRUCT_FLOATS,
OPTION_NO_CONSTRUCT_FLOATS,
OPTION_FP64,
+ OPTION_FPXX,
OPTION_GP64,
OPTION_RELAX_BRANCH,
OPTION_NO_RELAX_BRANCH,
OPTION_NO_PDR,
OPTION_MVXWORKS_PIC,
OPTION_NAN,
+ OPTION_ODD_SPREG,
+ OPTION_NO_ODD_SPREG,
OPTION_END_OF_ENUM
};
{"mips32r2", no_argument, NULL, OPTION_MIPS32R2},
{"mips32r3", no_argument, NULL, OPTION_MIPS32R3},
{"mips32r5", no_argument, NULL, OPTION_MIPS32R5},
+ {"mips32r6", no_argument, NULL, OPTION_MIPS32R6},
{"mips64r2", no_argument, NULL, OPTION_MIPS64R2},
{"mips64r3", no_argument, NULL, OPTION_MIPS64R3},
{"mips64r5", no_argument, NULL, OPTION_MIPS64R5},
+ {"mips64r6", no_argument, NULL, OPTION_MIPS64R6},
/* Options which specify Application Specific Extensions (ASEs). */
{"mips16", no_argument, NULL, OPTION_MIPS16},
{"construct-floats", no_argument, NULL, OPTION_CONSTRUCT_FLOATS},
{"no-construct-floats", no_argument, NULL, OPTION_NO_CONSTRUCT_FLOATS},
{"mfp64", no_argument, NULL, OPTION_FP64},
+ {"mfpxx", no_argument, NULL, OPTION_FPXX},
{"mgp64", no_argument, NULL, OPTION_GP64},
{"relax-branch", no_argument, NULL, OPTION_RELAX_BRANCH},
{"no-relax-branch", no_argument, NULL, OPTION_NO_RELAX_BRANCH},
{"mhard-float", no_argument, NULL, OPTION_HARD_FLOAT},
{"msingle-float", no_argument, NULL, OPTION_SINGLE_FLOAT},
{"mdouble-float", no_argument, NULL, OPTION_DOUBLE_FLOAT},
+ {"modd-spreg", no_argument, NULL, OPTION_ODD_SPREG},
+ {"mno-odd-spreg", no_argument, NULL, OPTION_NO_ODD_SPREG},
/* Strictly speaking this next option is ELF specific,
but we allow it for other ports as well in order to
int mips64_rev;
int micromips32_rev;
int micromips64_rev;
+
+ /* The architecture where the ASE was removed or -1 if the extension has not
+ been removed. */
+ int rem_rev;
};
/* A table of all supported ASEs. */
static const struct mips_ase mips_ases[] = {
{ "dsp", ASE_DSP, ASE_DSP64,
OPTION_DSP, OPTION_NO_DSP,
- 2, 2, 2, 2 },
+ 2, 2, 2, 2,
+ -1 },
{ "dspr2", ASE_DSP | ASE_DSPR2, 0,
OPTION_DSPR2, OPTION_NO_DSPR2,
- 2, 2, 2, 2 },
+ 2, 2, 2, 2,
+ -1 },
{ "eva", ASE_EVA, 0,
OPTION_EVA, OPTION_NO_EVA,
- 2, 2, 2, 2 },
+ 2, 2, 2, 2,
+ -1 },
{ "mcu", ASE_MCU, 0,
OPTION_MCU, OPTION_NO_MCU,
- 2, 2, 2, 2 },
+ 2, 2, 2, 2,
+ -1 },
/* Deprecated in MIPS64r5, but we don't implement that yet. */
{ "mdmx", ASE_MDMX, 0,
OPTION_MDMX, OPTION_NO_MDMX,
- -1, 1, -1, -1 },
+ -1, 1, -1, -1,
+ 6 },
/* Requires 64-bit FPRs, so the minimum MIPS32 revision is 2. */
{ "mips3d", ASE_MIPS3D, 0,
OPTION_MIPS3D, OPTION_NO_MIPS3D,
- 2, 1, -1, -1 },
+ 2, 1, -1, -1,
+ 6 },
{ "mt", ASE_MT, 0,
OPTION_MT, OPTION_NO_MT,
- 2, 2, -1, -1 },
+ 2, 2, -1, -1,
+ -1 },
{ "smartmips", ASE_SMARTMIPS, 0,
OPTION_SMARTMIPS, OPTION_NO_SMARTMIPS,
- 1, -1, -1, -1 },
+ 1, -1, -1, -1,
+ 6 },
{ "virt", ASE_VIRT, ASE_VIRT64,
OPTION_VIRT, OPTION_NO_VIRT,
- 2, 2, 2, 2 },
+ 2, 2, 2, 2,
+ -1 },
{ "msa", ASE_MSA, ASE_MSA64,
OPTION_MSA, OPTION_NO_MSA,
- 2, 2, 2, 2 },
+ 2, 2, 2, 2,
+ -1 },
{ "xpa", ASE_XPA, 0,
OPTION_XPA, OPTION_NO_XPA,
- 2, 2, -1, -1 }
+ 2, 2, -1, -1,
+ -1 },
};
/* The set of ASEs that require -mfp64. */
static inline void
mips_clear_insn_labels (void)
{
- register struct insn_label_list **pl;
+ struct insn_label_list **pl;
segment_info_type *si;
if (now_seg)
{
for (pl = &free_insn_labels; *pl != NULL; pl = &(*pl)->next)
;
-
+
si = seg_info (now_seg);
*pl = si->label_list;
si->label_list = NULL;
if (mips_opts.isa == ISA_MIPS32R5 || mips_opts.isa == ISA_MIPS64R5)
return 5;
+ if (mips_opts.isa == ISA_MIPS32R6 || mips_opts.isa == ISA_MIPS64R6)
+ return 6;
+
/* microMIPS implies revision 2 or above. */
if (mips_opts.micromips)
return 2;
as_warn (_("the `%s' extension requires %s%d revision %d or greater"),
ase->name, base, size, min_rev);
}
+ else if ((ase->rem_rev > 0 && mips_isa_rev () >= ase->rem_rev)
+ && (warned_isa & ase->flags) != ase->flags)
+ {
+ warned_isa |= ase->flags;
+ base = mips_opts.micromips ? "microMIPS" : "MIPS";
+ size = ISA_HAS_64BIT_REGS (mips_opts.isa) ? 64 : 32;
+ as_warn (_("the `%s' extension was removed in %s%d revision %d"),
+ ase->name, base, size, ase->rem_rev);
+ }
+
if ((ase->flags & FP64_ASES)
&& mips_opts.fp != 64
&& (warned_fp32 & ase->flags) != ase->flags)
}
/* Return the length of a microMIPS instruction in bytes. If bits of
- the mask beyond the low 16 are 0, then it is a 16-bit instruction.
- Otherwise assume a 32-bit instruction; 48-bit instructions (0x1f
- major opcode) will require further modifications to the opcode
- table. */
+ the mask beyond the low 16 are 0, then it is a 16-bit instruction,
+ otherwise it is a 32-bit instruction. */
static inline unsigned int
micromips_insn_length (const struct mips_opcode *mo)
static void
report_insn_error (const char *str)
{
- const char *msg;
+ const char *msg = concat (insn_error.msg, " `%s'", NULL);
- msg = ACONCAT ((insn_error.msg, " `%s'", NULL));
switch (insn_error.format)
{
case ERR_FMT_PLAIN:
as_bad (msg, insn_error.u.ss[0], insn_error.u.ss[1], str);
break;
}
+
+ free ((char *) msg);
}
/* Initialize vr4120_conflicts. There is a bit of duplication here:
{"$28", RTYPE_NUM | 28}, \
{"$29", RTYPE_NUM | 29}, \
{"$30", RTYPE_NUM | 30}, \
- {"$31", RTYPE_NUM | 31}
+ {"$31", RTYPE_NUM | 31}
#define FPU_REGISTER_NAMES \
{"$f0", RTYPE_FPU | 0}, \
{"$ta0", RTYPE_GP | 12}, /* alias for $t4 */ \
{"$ta1", RTYPE_GP | 13}, /* alias for $t5 */ \
{"$ta2", RTYPE_GP | 14}, /* alias for $t6 */ \
- {"$ta3", RTYPE_GP | 15} /* alias for $t7 */
+ {"$ta3", RTYPE_GP | 15} /* alias for $t7 */
/* Remaining symbolic register names */
#define SYMBOLIC_REGISTER_NAMES \
/* The $txx registers depends on the abi,
these will be added later into the symbol table from
- one of the tables below once mips_abi is set after
+ one of the tables below once mips_abi is set after
parsing of arguments from the command line. */
SYMBOLIC_REGISTER_NAMES,
static char *
mips_parse_argument_token (char *s, char float_format)
{
- char *end, *save_in, *err;
+ char *end, *save_in;
+ const char *err;
unsigned int regno1, regno2, channels;
struct mips_operand_token token;
used_bits &= ~(mask & 0x700);
}
/* Skip prefix characters. */
- if (decode_operand && (*s == '+' || *s == 'm'))
+ if (decode_operand && (*s == '+' || *s == 'm' || *s == '-'))
++s;
opno += 1;
break;
as_bad (_("-G may not be used in position-independent code"));
g_switch_value = 0;
}
+ else if (mips_abicalls)
+ {
+ if (g_switch_seen && g_switch_value != 0)
+ as_bad (_("-G may not be used with abicalls"));
+ g_switch_value = 0;
+ }
if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_opts.arch))
as_warn (_("could not set architecture and machine"));
/* We add all the general register names to the symbol table. This
helps us detect invalid uses of them. */
- for (i = 0; reg_names[i].name; i++)
+ for (i = 0; reg_names[i].name; i++)
symbol_table_insert (symbol_new (reg_names[i].name, reg_section,
reg_names[i].num, /* & RNUM_MASK, */
&zero_address_frag));
if (HAVE_NEWABI)
- for (i = 0; reg_names_n32n64[i].name; i++)
+ for (i = 0; reg_names_n32n64[i].name; i++)
symbol_table_insert (symbol_new (reg_names_n32n64[i].name, reg_section,
reg_names_n32n64[i].num, /* & RNUM_MASK, */
&zero_address_frag));
else
- for (i = 0; reg_names_o32[i].name; i++)
+ for (i = 0; reg_names_o32[i].name; i++)
symbol_table_insert (symbol_new (reg_names_o32[i].name, reg_section,
reg_names_o32[i].num, /* & RNUM_MASK, */
&zero_address_frag));
}
}
+ sec = subseg_new (".MIPS.abiflags", (subsegT) 0);
+ bfd_set_section_flags (stdoutput, sec,
+ SEC_READONLY | SEC_DATA | SEC_ALLOC | SEC_LOAD);
+ bfd_set_section_alignment (stdoutput, sec, 3);
+ mips_flags_frag = frag_more (sizeof (Elf_External_ABIFlags_v0));
+
if (ECOFF_DEBUGGING)
{
sec = subseg_new (".mdebug", (subsegT) 0);
init_vr4120_conflicts ();
}
+static inline void
+fpabi_incompatible_with (int fpabi, const char *what)
+{
+ as_warn (_(".gnu_attribute %d,%d is incompatible with `%s'"),
+ Tag_GNU_MIPS_ABI_FP, fpabi, what);
+}
+
+static inline void
+fpabi_requires (int fpabi, const char *what)
+{
+ as_warn (_(".gnu_attribute %d,%d requires `%s'"),
+ Tag_GNU_MIPS_ABI_FP, fpabi, what);
+}
+
+/* Check -mabi and register sizes against the specified FP ABI. */
+static void
+check_fpabi (int fpabi)
+{
+ switch (fpabi)
+ {
+ case Val_GNU_MIPS_ABI_FP_DOUBLE:
+ if (file_mips_opts.soft_float)
+ fpabi_incompatible_with (fpabi, "softfloat");
+ else if (file_mips_opts.single_float)
+ fpabi_incompatible_with (fpabi, "singlefloat");
+ if (file_mips_opts.gp == 64 && file_mips_opts.fp == 32)
+ fpabi_incompatible_with (fpabi, "gp=64 fp=32");
+ else if (file_mips_opts.gp == 32 && file_mips_opts.fp == 64)
+ fpabi_incompatible_with (fpabi, "gp=32 fp=64");
+ break;
+
+ case Val_GNU_MIPS_ABI_FP_XX:
+ if (mips_abi != O32_ABI)
+ fpabi_requires (fpabi, "-mabi=32");
+ else if (file_mips_opts.soft_float)
+ fpabi_incompatible_with (fpabi, "softfloat");
+ else if (file_mips_opts.single_float)
+ fpabi_incompatible_with (fpabi, "singlefloat");
+ else if (file_mips_opts.fp != 0)
+ fpabi_requires (fpabi, "fp=xx");
+ break;
+
+ case Val_GNU_MIPS_ABI_FP_64A:
+ case Val_GNU_MIPS_ABI_FP_64:
+ if (mips_abi != O32_ABI)
+ fpabi_requires (fpabi, "-mabi=32");
+ else if (file_mips_opts.soft_float)
+ fpabi_incompatible_with (fpabi, "softfloat");
+ else if (file_mips_opts.single_float)
+ fpabi_incompatible_with (fpabi, "singlefloat");
+ else if (file_mips_opts.fp != 64)
+ fpabi_requires (fpabi, "fp=64");
+ else if (fpabi == Val_GNU_MIPS_ABI_FP_64 && !file_mips_opts.oddspreg)
+ fpabi_incompatible_with (fpabi, "nooddspreg");
+ else if (fpabi == Val_GNU_MIPS_ABI_FP_64A && file_mips_opts.oddspreg)
+ fpabi_requires (fpabi, "nooddspreg");
+ break;
+
+ case Val_GNU_MIPS_ABI_FP_SINGLE:
+ if (file_mips_opts.soft_float)
+ fpabi_incompatible_with (fpabi, "softfloat");
+ else if (!file_mips_opts.single_float)
+ fpabi_requires (fpabi, "singlefloat");
+ break;
+
+ case Val_GNU_MIPS_ABI_FP_SOFT:
+ if (!file_mips_opts.soft_float)
+ fpabi_requires (fpabi, "softfloat");
+ break;
+
+ case Val_GNU_MIPS_ABI_FP_OLD_64:
+ as_warn (_(".gnu_attribute %d,%d is no longer supported"),
+ Tag_GNU_MIPS_ABI_FP, fpabi);
+ break;
+
+ case Val_GNU_MIPS_ABI_FP_NAN2008:
+ /* Silently ignore compatibility value. */
+ break;
+
+ default:
+ as_warn (_(".gnu_attribute %d,%d is not a recognized"
+ " floating-point ABI"), Tag_GNU_MIPS_ABI_FP, fpabi);
+ break;
+ }
+}
+
/* Perform consistency checks on the current options. */
static void
/* Check the size of the float registers agrees with the ABI and ISA. */
switch (opts->fp)
{
+ case 0:
+ if (!CPU_HAS_LDC1_SDC1 (opts->arch))
+ as_bad (_("`fp=xx' used with a cpu lacking ldc1/sdc1 instructions"));
+ else if (opts->single_float == 1)
+ as_bad (_("`fp=xx' cannot be used with `singlefloat'"));
+ break;
case 64:
if (!ISA_HAS_64BIT_FPRS (opts->isa))
as_bad (_("`fp=64' used with a 32-bit fpu"));
if (abi_checks
&& ABI_NEEDS_64BIT_REGS (mips_abi))
as_warn (_("`fp=32' used with a 64-bit ABI"));
+ if (ISA_IS_R6 (mips_opts.isa) && opts->single_float == 0)
+ as_bad (_("`fp=32' used with a MIPS R6 cpu"));
break;
default:
as_bad (_("Unknown size of floating point registers"));
break;
}
+ if (ABI_NEEDS_64BIT_REGS (mips_abi) && !opts->oddspreg)
+ as_bad (_("`nooddspreg` cannot be used with a 64-bit ABI"));
+
if (opts->micromips == 1 && opts->mips16 == 1)
as_bad (_("`mips16' cannot be used with `micromips'"));
+ else if (ISA_IS_R6 (mips_opts.isa)
+ && (opts->micromips == 1
+ || opts->mips16 == 1))
+ as_fatal (_("`%s' can not be used with `%s'"),
+ opts->micromips ? "micromips" : "mips16",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+
+ if (ISA_IS_R6 (opts->isa) && mips_relax_branch)
+ as_fatal (_("branch relaxation is not supported in `%s'"),
+ mips_cpu_info_from_isa (opts->isa)->name);
}
/* Perform consistency checks on the module level options exactly once.
&& ISA_HAS_64BIT_FPRS (file_mips_opts.isa))
/* Handle ASEs that require 64-bit float registers, if possible. */
file_mips_opts.fp = 64;
+ else if (ISA_IS_R6 (mips_opts.isa))
+ /* R6 implies 64-bit float registers. */
+ file_mips_opts.fp = 64;
else
/* 32-bit float registers. */
file_mips_opts.fp = 32;
arch_info = mips_cpu_info_from_arch (file_mips_opts.arch);
+ /* Disable operations on odd-numbered floating-point registers by default
+ when using the FPXX ABI. */
+ if (file_mips_opts.oddspreg < 0)
+ {
+ if (file_mips_opts.fp == 0)
+ file_mips_opts.oddspreg = 0;
+ else
+ file_mips_opts.oddspreg = 1;
+ }
+
/* End of GCC-shared inference code. */
/* This flag is set when we have a 64-bit capable CPU but use only
file_mips_opts.micromips = (CPU_HAS_MICROMIPS (file_mips_opts.arch))
? 1 : 0;
+ if (mips_nan2008 == -1)
+ mips_nan2008 = (ISA_HAS_LEGACY_NAN (file_mips_opts.isa)) ? 0 : 1;
+ else if (!ISA_HAS_LEGACY_NAN (file_mips_opts.isa) && mips_nan2008 == 0)
+ as_fatal (_("`%s' does not support legacy NaN"),
+ mips_cpu_info_from_arch (file_mips_opts.arch)->name);
+
/* Some ASEs require 64-bit FPRs, so -mfp32 should stop those ASEs from
being selected implicitly. */
if (file_mips_opts.fp != 64)
case BFD_RELOC_MICROMIPS_7_PCREL_S1:
case BFD_RELOC_MICROMIPS_10_PCREL_S1:
case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ case BFD_RELOC_MIPS_21_PCREL_S2:
+ case BFD_RELOC_MIPS_26_PCREL_S2:
+ case BFD_RELOC_MIPS_18_PCREL_S3:
+ case BFD_RELOC_MIPS_19_PCREL_S2:
return TRUE;
case BFD_RELOC_32_PCREL:
+ case BFD_RELOC_HI16_S_PCREL:
+ case BFD_RELOC_LO16_PCREL:
return HAVE_64BIT_ADDRESSES;
default:
uval = insn_extract_operand (insn, operand);
return (1 << (uval & 31)) | (1 << (uval >> 5));
+ case OP_SAME_RS_RT:
+ if (!(type_mask & (1 << OP_REG_GP)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ gas_assert ((uval & 31) == (uval >> 5));
+ return 1 << (uval & 31);
+
+ case OP_CHECK_PREV:
+ case OP_NON_ZERO_REG:
+ if (!(type_mask & (1 << OP_REG_GP)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ return 1 << (uval & 31);
+
case OP_LWM_SWM_LIST:
abort ();
mips_oddfpreg_ok (const struct mips_opcode *insn, int opnum)
{
const char *s = insn->name;
+ bfd_boolean oddspreg = (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa, mips_opts.arch)
+ || FPR_SIZE == 64)
+ && mips_opts.oddspreg;
if (insn->pinfo == INSN_MACRO)
/* Let a macro pass, we'll catch it later when it is expanded. */
return TRUE;
- if (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa) || mips_opts.arch == CPU_R5900)
- {
- /* Allow odd registers for single-precision ops. */
- switch (insn->pinfo & (FP_S | FP_D))
- {
- case FP_S:
- case 0:
- return TRUE;
- case FP_D:
- return FALSE;
- default:
- break;
- }
+ /* Single-precision coprocessor loads and moves are OK for 32-bit registers,
+ otherwise it depends on oddspreg. */
+ if ((insn->pinfo & FP_S)
+ && (insn->pinfo & (INSN_LOAD_MEMORY | INSN_STORE_MEMORY
+ | INSN_LOAD_COPROC | INSN_COPROC_MOVE)))
+ return FPR_SIZE == 32 || oddspreg;
- /* Cvt.w.x and cvt.x.w allow an odd register for a 'w' or 's' operand. */
- s = strchr (insn->name, '.');
- if (s != NULL && opnum == 2)
- s = strchr (s + 1, '.');
- return (s != NULL && (s[1] == 'w' || s[1] == 's'));
+ /* Allow odd registers for single-precision ops and double-precision if the
+ floating-point registers are 64-bit wide. */
+ switch (insn->pinfo & (FP_S | FP_D))
+ {
+ case FP_S:
+ case 0:
+ return oddspreg;
+ case FP_D:
+ return FPR_SIZE == 64;
+ default:
+ break;
}
- /* Single-precision coprocessor loads and moves are OK too. */
- if ((insn->pinfo & FP_S)
- && (insn->pinfo & (INSN_COPROC_MEMORY_DELAY | INSN_STORE_MEMORY
- | INSN_LOAD_COPROC_DELAY | INSN_COPROC_MOVE_DELAY)))
- return TRUE;
+ /* Cvt.w.x and cvt.x.w allow an odd register for a 'w' or 's' operand. */
+ s = strchr (insn->name, '.');
+ if (s != NULL && opnum == 2)
+ s = strchr (s + 1, '.');
+ if (s != NULL && (s[1] == 'w' || s[1] == 's'))
+ return oddspreg;
- return FALSE;
+ return FPR_SIZE == 64;
}
/* Information about an instruction argument that we're trying to match. */
FPR load, store or move (including moves to and from GPRs). */
if ((mips_opts.ase & ASE_MDMX)
&& (opcode->pinfo & FP_D)
- && (opcode->pinfo & (INSN_COPROC_MOVE_DELAY
+ && (opcode->pinfo & (INSN_COPROC_MOVE
| INSN_COPROC_MEMORY_DELAY
- | INSN_LOAD_COPROC_DELAY
+ | INSN_LOAD_COPROC
| INSN_LOAD_MEMORY
| INSN_STORE_MEMORY)))
return RTYPE_FPU | RTYPE_VEC;
if (type == OP_REG_FP
&& (regno & 1) != 0
- && FPR_SIZE != 64
&& !mips_oddfpreg_ok (arg->insn->insn_mo, arg->opnum))
- as_warn (_("float register should be even, was %d"), regno);
+ {
+ /* This was a warning prior to introducing O32 FPXX and FP64 support
+ so maintain a warning for FP32 but raise an error for the new
+ cases. */
+ if (FPR_SIZE == 32)
+ as_warn (_("float register should be even, was %d"), regno);
+ else
+ as_bad (_("float register should be even, was %d"), regno);
+ }
if (type == OP_REG_CCC)
{
return TRUE;
}
+/* OP_CHECK_PREV matcher. */
+
+static bfd_boolean
+match_check_prev_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand_base)
+{
+ const struct mips_check_prev_operand *operand;
+ unsigned int regno;
+
+ operand = (const struct mips_check_prev_operand *) operand_base;
+
+ if (!match_reg (arg, OP_REG_GP, ®no))
+ return FALSE;
+
+ if (!operand->zero_ok && regno == 0)
+ return FALSE;
+
+ if ((operand->less_than_ok && regno < arg->last_regno)
+ || (operand->greater_than_ok && regno > arg->last_regno)
+ || (operand->equal_ok && regno == arg->last_regno))
+ {
+ arg->last_regno = regno;
+ insn_insert_operand (arg->insn, operand_base, regno);
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/* OP_SAME_RS_RT matcher. */
+
+static bfd_boolean
+match_same_rs_rt_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
+{
+ unsigned int regno;
+
+ if (!match_reg (arg, OP_REG_GP, ®no))
+ return FALSE;
+
+ if (regno == 0)
+ {
+ set_insn_error (arg->argnum, _("the source register must not be $0"));
+ return FALSE;
+ }
+
+ arg->last_regno = regno;
+
+ insn_insert_operand (arg->insn, operand, regno | (regno << 5));
+ return TRUE;
+}
+
/* OP_LWM_SWM_LIST matcher. */
static bfd_boolean
return FALSE;
}
+/* OP_NON_ZERO_REG matcher. */
+
+static bfd_boolean
+match_non_zero_reg_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
+{
+ unsigned int regno;
+
+ if (!match_reg (arg, OP_REG_GP, ®no))
+ return FALSE;
+
+ if (regno == 0)
+ return FALSE;
+
+ arg->last_regno = regno;
+ insn_insert_operand (arg->insn, operand, regno);
+ return TRUE;
+}
+
/* OP_REPEAT_DEST_REG and OP_REPEAT_PREV_REG matcher. OTHER_REGNO is the
register that we need to match. */
/* Handle 64-bit constants for which an immediate value is best. */
if (length == 8
&& !mips_disable_float_construction
- /* Constants can only be constructed in GPRs and copied
- to FPRs if the GPRs are at least as wide as the FPRs.
- Force the constant into memory if we are using 64-bit FPRs
- but the GPRs are only 32 bits wide. */
- /* ??? No longer true with the addition of MTHC1, but this
- is legacy code... */
- && (using_gprs || !(FPR_SIZE == 64 && GPR_SIZE == 32))
+ /* Constants can only be constructed in GPRs and copied to FPRs if the
+ GPRs are at least as wide as the FPRs or MTHC1 is available.
+ Unlike most tests for 32-bit floating-point registers this check
+ specifically looks for GPR_SIZE == 32 as the FPXX ABI does not
+ permit 64-bit moves without MXHC1.
+ Force the constant into memory otherwise. */
+ && (using_gprs
+ || GPR_SIZE == 64
+ || ISA_HAS_MXHC1 (mips_opts.isa)
+ || FPR_SIZE == 32)
&& ((data[0] == 0 && data[1] == 0)
|| (data[2] == 0 && data[3] == 0))
&& ((data[4] == 0 && data[5] == 0)
If using 32-bit registers, set IMM to the high order 32 bits and
OFFSET to the low order 32 bits. Otherwise, set IMM to the entire
64 bit constant. */
- if (using_gprs ? GPR_SIZE == 32 : FPR_SIZE != 64)
+ if (GPR_SIZE == 32 || (!using_gprs && FPR_SIZE != 64))
{
imm->X_op = O_constant;
offset->X_op = O_constant;
case OP_REG_INDEX:
return match_reg_index_operand (arg, operand);
+
+ case OP_SAME_RS_RT:
+ return match_same_rs_rt_operand (arg, operand);
+
+ case OP_CHECK_PREV:
+ return match_check_prev_operand (arg, operand);
+
+ case OP_NON_ZERO_REG:
+ return match_non_zero_reg_operand (arg, operand);
}
abort ();
}
prev_pinfo = history[0].insn_mo->pinfo;
if (!mips_opts.noreorder
&& (((prev_pinfo & INSN_LOAD_MEMORY) && !gpr_interlocks)
- || ((prev_pinfo & INSN_LOAD_COPROC_DELAY) && !cop_interlocks))
+ || ((prev_pinfo & INSN_LOAD_COPROC) && !cop_interlocks))
&& (gpr_write_mask (&history[0]) & (1 << reg)))
return TRUE;
are on the RT register. */
/* Itbl support may require additional care here. */
if ((!gpr_interlocks && (pinfo1 & INSN_LOAD_MEMORY))
- || (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC_DELAY)))
+ || (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC)))
{
if (insn2 == NULL || (gpr_read_mask (insn2) & gpr_write_mask (insn1)))
return 1;
/* Itbl support may require additional care here. FIXME!
Need to modify this to include knowledge about
user specified delays! */
- else if ((!cop_interlocks && (pinfo1 & INSN_COPROC_MOVE_DELAY))
+ else if ((!cop_interlocks && (pinfo1 & INSN_COPROC_MOVE))
|| (!cop_mem_interlocks && (pinfo1 & INSN_COPROC_MEMORY_DELAY)))
{
/* Handle cases where INSN1 writes to a known general coprocessor
return 1;
}
+ /* Forbidden slots can not contain Control Transfer Instructions (CTIs)
+ CTIs include all branches and jumps, nal, eret, eretnc, deret, wait
+ and pause. */
+ if ((insn1->insn_mo->pinfo2 & INSN2_FORBIDDEN_SLOT)
+ && ((pinfo2 & INSN_NO_DELAY_SLOT)
+ || (insn2 && delayed_branch_p (insn2))))
+ return 1;
+
return 0;
}
* Run the data cache in write-through mode.
* Insert a non-store instruction between
Store A and Store B or Store B and Store C. */
-
+
static int
nops_for_24k (int ignore, const struct mips_cl_insn *hist,
const struct mips_cl_insn *insn)
}
break;
+ case BFD_RELOC_MIPS_21_PCREL_S2:
+ {
+ int shift;
+
+ shift = 2;
+ if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
+ as_bad (_("branch to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ if ((address_expr->X_add_number + (1 << (shift + 20)))
+ & ~((1 << (shift + 21)) - 1))
+ as_bad (_("branch address range overflow (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= ((address_expr->X_add_number >> shift)
+ & 0x1fffff);
+ }
+ break;
+
+ case BFD_RELOC_MIPS_26_PCREL_S2:
+ {
+ int shift;
+
+ shift = 2;
+ if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0)
+ as_bad (_("branch to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ if ((address_expr->X_add_number + (1 << (shift + 25)))
+ & ~((1 << (shift + 26)) - 1))
+ as_bad (_("branch address range overflow (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= ((address_expr->X_add_number >> shift)
+ & 0x3ffffff);
+ }
+ break;
+
default:
{
offsetT value;
if (hi_fixup == 0
|| !fixup_has_matching_lo_p (hi_fixup->fixp))
{
- hi_fixup = ((struct mips_hi_fixup *)
- xmalloc (sizeof (struct mips_hi_fixup)));
+ hi_fixup = XNEW (struct mips_hi_fixup);
hi_fixup->next = mips_hi_fixup_list;
mips_hi_fixup_list = hi_fixup;
}
arg.opnum += 1;
switch (*args)
{
+ case '-':
+ switch (args[1])
+ {
+ case 'A':
+ *offset_reloc = BFD_RELOC_MIPS_19_PCREL_S2;
+ break;
+
+ case 'B':
+ *offset_reloc = BFD_RELOC_MIPS_18_PCREL_S3;
+ break;
+ }
+ break;
+
case '+':
switch (args[1])
{
case 'i':
*offset_reloc = BFD_RELOC_MIPS_JMP;
break;
+
+ case '\'':
+ *offset_reloc = BFD_RELOC_MIPS_26_PCREL_S2;
+ break;
+
+ case '\"':
+ *offset_reloc = BFD_RELOC_MIPS_21_PCREL_S2;
+ break;
}
break;
abort ();
/* Skip prefixes. */
- if (*args == '+' || *args == 'm')
+ if (*args == '+' || *args == 'm' || *args == '-')
args++;
if (mips_optional_operand_p (operand)
static const char * const trap_fmt[2] = { "s,t,q", "s,t,|" };
#define BRK_FMT (brk_fmt[mips_opts.micromips][mips_opts.insn32])
-#define COP12_FMT (cop12_fmt[mips_opts.micromips])
+#define COP12_FMT (ISA_IS_R6 (mips_opts.isa) ? "E,+:(d)" \
+ : cop12_fmt[mips_opts.micromips])
#define JALR_FMT (jalr_fmt[mips_opts.micromips])
#define LUI_FMT (lui_fmt[mips_opts.micromips])
#define MEM12_FMT (mem12_fmt[mips_opts.micromips])
+#define LL_SC_FMT (ISA_IS_R6 (mips_opts.isa) ? "t,+j(b)" \
+ : mem12_fmt[mips_opts.micromips])
#define MFHL_FMT (mfhl_fmt[mips_opts.micromips][mips_opts.insn32])
#define SHFT_FMT (shft_fmt[mips_opts.micromips])
#define TRAP_FMT (trap_fmt[mips_opts.micromips])
uval |= (uval << 5);
insn_insert_operand (&insn, operand, uval);
- if (*fmt == '+' || *fmt == 'm')
+ if (*fmt == '+' || *fmt == 'm' || *fmt == '-')
++fmt;
break;
}
&& !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
macro_build (NULL, "move", "mp,mj", dest, source);
else
- macro_build (NULL, GPR_SIZE == 32 ? "addu" : "daddu", "d,v,t",
- dest, source, 0);
+ macro_build (NULL, "or", "d,v,t", dest, source, 0);
}
/* Emit an SVR4 PIC sequence to load address LOCAL into DEST, where
breg = op[2];
if (dbl && GPR_SIZE == 32)
- as_warn (_("dla used to load 32-bit register"));
+ as_warn (_("dla used to load 32-bit register; recommend using la "
+ "instead"));
if (!dbl && HAVE_64BIT_OBJECTS)
- as_warn (_("la used to load 64-bit address"));
+ as_warn (_("la used to load 64-bit address; recommend using dla "
+ "instead"));
if (small_offset_p (0, align, 16))
{
case M_LWC2_AB:
s = "lwc2";
fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 11
+ : 16);
/* Itbl support may require additional care here. */
coproc = 1;
goto ld_st;
case M_LDC2_AB:
s = "ldc2";
fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 11
+ : 16);
/* Itbl support may require additional care here. */
coproc = 1;
goto ld_st;
goto ld_st;
case M_LL_AB:
s = "ll";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ fmt = LL_SC_FMT;
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 9
+ : 16);
goto ld;
case M_LLD_AB:
s = "lld";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ fmt = LL_SC_FMT;
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 9
+ : 16);
goto ld;
case M_LWU_AB:
s = "lwu";
case M_SWC2_AB:
s = "swc2";
fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 11
+ : 16);
/* Itbl support may require additional care here. */
coproc = 1;
goto ld_st;
goto ld_st;
case M_SC_AB:
s = "sc";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ fmt = LL_SC_FMT;
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 9
+ : 16);
goto ld_st;
case M_SCD_AB:
s = "scd";
- fmt = MEM12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ fmt = LL_SC_FMT;
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 9
+ : 16);
goto ld_st;
case M_CACHE_AB:
s = "cache";
- fmt = mips_opts.micromips ? "k,~(b)" : "k,o(b)";
- offbits = (mips_opts.micromips ? 12 : 16);
+ fmt = (mips_opts.micromips ? "k,~(b)"
+ : ISA_IS_R6 (mips_opts.isa) ? "k,+j(b)"
+ : "k,o(b)");
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 9
+ : 16);
goto ld_st;
case M_CACHEE_AB:
s = "cachee";
goto ld_st;
case M_PREF_AB:
s = "pref";
- fmt = !mips_opts.micromips ? "k,o(b)" : "k,~(b)";
- offbits = (mips_opts.micromips ? 12 : 16);
+ fmt = (mips_opts.micromips ? "k,~(b)"
+ : ISA_IS_R6 (mips_opts.isa) ? "k,+j(b)"
+ : "k,o(b)");
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 9
+ : 16);
goto ld_st;
case M_PREFE_AB:
s = "prefe";
case M_SDC2_AB:
s = "sdc2";
fmt = COP12_FMT;
- offbits = (mips_opts.micromips ? 12 : 16);
+ offbits = (mips_opts.micromips ? 12
+ : ISA_IS_R6 (mips_opts.isa) ? 11
+ : 16);
/* Itbl support may require additional care here. */
coproc = 1;
goto ld_st;
{
used_at = 1;
load_register (AT, &imm_expr, FPR_SIZE == 64);
- if (FPR_SIZE == 64)
- {
- gas_assert (GPR_SIZE == 64);
- macro_build (NULL, "dmtc1", "t,S", AT, op[0]);
- }
+ if (FPR_SIZE == 64 && GPR_SIZE == 64)
+ macro_build (NULL, "dmtc1", "t,S", AT, op[0]);
else
{
- macro_build (NULL, "mtc1", "t,G", AT, op[0] + 1);
+ if (ISA_HAS_MXHC1 (mips_opts.isa))
+ macro_build (NULL, "mthc1", "t,G", AT, op[0]);
+ else if (FPR_SIZE != 32)
+ as_bad (_("Unable to generate `%s' compliant code "
+ "without mthc1"),
+ (FPR_SIZE == 64) ? "fp64" : "fpxx");
+ else
+ macro_build (NULL, "mtc1", "t,G", AT, op[0] + 1);
if (offset_expr.X_op == O_absent)
macro_build (NULL, "mtc1", "t,G", 0, op[0]);
else
abort ();
break;
-
+
case M_SAA_AB:
s = "saa";
- offbits = 0;
- fmt = "t,(b)";
- goto ld_st;
+ goto saa_saad;
case M_SAAD_AB:
s = "saad";
+ saa_saad:
+ gas_assert (!mips_opts.micromips);
offbits = 0;
fmt = "t,(b)";
goto ld_st;
case M_DROL_I:
{
unsigned int rot;
- char *l;
- char *rr;
+ const char *l;
+ const char *rr;
rot = imm_expr.X_add_number & 0x3f;
if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
case M_DROR_I:
{
unsigned int rot;
- char *l;
- char *rr;
+ const char *l;
+ const char *rr;
rot = imm_expr.X_add_number & 0x3f;
if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
struct mips_opcode *insn;
/* Make a copy of the instruction so that we can fiddle with it. */
- name = alloca (length + 1);
- memcpy (name, start, length);
- name[length] = '\0';
+ name = xstrndup (start, length);
/* Look up the instruction as-is. */
insn = (struct mips_opcode *) hash_find (hash, name);
if (insn)
- return insn;
+ goto end;
dot = strchr (name, '.');
if (dot && dot[1])
if (insn && (insn->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) != 0)
{
*opcode_extra |= mask << mips_vu0_channel_mask.lsb;
- return insn;
+ goto end;
}
}
}
if (insn)
{
forced_insn_length = suffix;
- return insn;
+ goto end;
}
}
}
- return NULL;
+ insn = NULL;
+ end:
+ free (name);
+ return insn;
}
/* Assemble an instruction into its binary format. If the instruction
is the length that the user requested, or 0 if none. */
static void
-mips16_immed (char *file, unsigned int line, int type,
+mips16_immed (const char *file, unsigned int line, int type,
bfd_reloc_code_real_type reloc, offsetT val,
unsigned int user_insn_length, unsigned long *insn)
{
{"%tprel_hi", BFD_RELOC_MIPS_TLS_TPREL_HI16},
{"%tprel_lo", BFD_RELOC_MIPS_TLS_TPREL_LO16},
{"%gottprel", BFD_RELOC_MIPS_TLS_GOTTPREL},
- {"%hi", BFD_RELOC_HI16_S}
+ {"%hi", BFD_RELOC_HI16_S},
+ {"%pcrel_hi", BFD_RELOC_HI16_S_PCREL},
+ {"%pcrel_lo", BFD_RELOC_LO16_PCREL}
};
static const struct percent_op_match mips16_percent_op[] =
input_line_pointer = save_in;
}
-char *
+const char *
md_atof (int type, char *litP, int *sizeP)
{
return ieee_md_atof (type, litP, sizeP, target_big_endian);
}
int
-md_parse_option (int c, char *arg)
+md_parse_option (int c, const char *arg)
{
unsigned int i;
file_mips_opts.isa = ISA_MIPS32R5;
break;
+ case OPTION_MIPS32R6:
+ file_mips_opts.isa = ISA_MIPS32R6;
+ break;
+
case OPTION_MIPS64R2:
file_mips_opts.isa = ISA_MIPS64R2;
break;
file_mips_opts.isa = ISA_MIPS64R5;
break;
+ case OPTION_MIPS64R6:
+ file_mips_opts.isa = ISA_MIPS64R6;
+ break;
+
case OPTION_MIPS64:
file_mips_opts.isa = ISA_MIPS64;
break;
file_mips_opts.fp = 32;
break;
+ case OPTION_FPXX:
+ file_mips_opts.fp = 0;
+ break;
+
case OPTION_FP64:
file_mips_opts.fp = 64;
break;
+ case OPTION_ODD_SPREG:
+ file_mips_opts.oddspreg = 1;
+ break;
+
+ case OPTION_NO_ODD_SPREG:
+ file_mips_opts.oddspreg = 0;
+ break;
+
case OPTION_SINGLE_FLOAT:
file_mips_opts.single_float = 1;
break;
case OPTION_NAN:
if (strcmp (arg, "2008") == 0)
- mips_flag_nan2008 = TRUE;
+ mips_nan2008 = 1;
else if (strcmp (arg, "legacy") == 0)
- mips_flag_nan2008 = FALSE;
+ mips_nan2008 = 0;
else
{
as_fatal (_("invalid NaN setting -mnan=%s"), arg);
case BFD_RELOC_MICROMIPS_16_PCREL_S1:
case BFD_RELOC_MICROMIPS_JMP:
case BFD_RELOC_16_PCREL_S2:
+ case BFD_RELOC_MIPS_21_PCREL_S2:
+ case BFD_RELOC_MIPS_26_PCREL_S2:
case BFD_RELOC_MIPS_JMP:
/* Return the address of the delay slot. */
return addr + 4;
|| fixp->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1)
return 1;
+ /* We want all PC-relative relocations to be kept for R6 relaxation. */
+ if (ISA_IS_R6 (mips_opts.isa)
+ && (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MIPS_21_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MIPS_26_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MIPS_18_PCREL_S3
+ || fixp->fx_r_type == BFD_RELOC_MIPS_19_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_HI16_S_PCREL
+ || fixp->fx_r_type == BFD_RELOC_LO16_PCREL))
+ return 1;
+
return 0;
}
case BFD_RELOC_MICROMIPS_10_PCREL_S1:
case BFD_RELOC_MICROMIPS_16_PCREL_S1:
case BFD_RELOC_32_PCREL:
+ case BFD_RELOC_MIPS_21_PCREL_S2:
+ case BFD_RELOC_MIPS_26_PCREL_S2:
+ case BFD_RELOC_MIPS_18_PCREL_S3:
+ case BFD_RELOC_MIPS_19_PCREL_S2:
+ case BFD_RELOC_HI16_S_PCREL:
+ case BFD_RELOC_LO16_PCREL:
break;
case BFD_RELOC_32:
|| fixP->fx_r_type == BFD_RELOC_MICROMIPS_SUB
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY
- || fixP->fx_r_type == BFD_RELOC_MIPS_TLS_DTPREL64);
+ || fixP->fx_r_type == BFD_RELOC_MIPS_TLS_DTPREL64
+ || fixP->fx_r_type == BFD_RELOC_NONE);
buf = fixP->fx_frag->fr_literal + fixP->fx_where;
md_number_to_chars (buf, *valP, fixP->fx_size);
break;
+ case BFD_RELOC_MIPS_21_PCREL_S2:
+ case BFD_RELOC_MIPS_26_PCREL_S2:
+ if ((*valP & 0x3) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch to misaligned address (%lx)"), (long) *valP);
+
+ gas_assert (!fixP->fx_done);
+ break;
+
+ case BFD_RELOC_MIPS_18_PCREL_S3:
+ if ((S_GET_VALUE (fixP->fx_addsy) & 0x7) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("PC-relative access using misaligned symbol (%lx)"),
+ (long) S_GET_VALUE (fixP->fx_addsy));
+ if ((fixP->fx_offset & 0x7) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("PC-relative access using misaligned offset (%lx)"),
+ (long) fixP->fx_offset);
+
+ gas_assert (!fixP->fx_done);
+ break;
+
+ case BFD_RELOC_MIPS_19_PCREL_S2:
+ if ((*valP & 0x3) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("PC-relative access to misaligned address (%lx)"),
+ (long) (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset));
+
+ gas_assert (!fixP->fx_done);
+ break;
+
+ case BFD_RELOC_HI16_S_PCREL:
+ case BFD_RELOC_LO16_PCREL:
+ gas_assert (!fixP->fx_done);
+ break;
+
case BFD_RELOC_16_PCREL_S2:
if ((*valP & 0x3) != 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
S_SET_WEAK (fixP->fx_addsy);
break;
+ case BFD_RELOC_NONE:
case BFD_RELOC_VTABLE_ENTRY:
fixP->fx_done = 0;
break;
char *name;
symbolS *p;
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
p = (symbolS *) symbol_find_or_make (name);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
return p;
}
void
s_change_section (int ignore ATTRIBUTE_UNUSED)
{
+ char *saved_ilp;
char *section_name;
- char c;
+ char c, endc;
char next_c = 0;
int section_type;
int section_flag;
int section_entry_size;
int section_alignment;
- section_name = input_line_pointer;
- c = get_symbol_end ();
+ saved_ilp = input_line_pointer;
+ endc = get_symbol_name (§ion_name);
+ c = (endc == '"' ? input_line_pointer[1] : endc);
if (c)
- next_c = *(input_line_pointer + 1);
+ next_c = input_line_pointer [(endc == '"' ? 2 : 1)];
/* Do we have .section Name<,"flags">? */
if (c != ',' || (c == ',' && next_c == '"'))
{
- /* just after name is now '\0'. */
- *input_line_pointer = c;
- input_line_pointer = section_name;
+ /* Just after name is now '\0'. */
+ (void) restore_line_pointer (endc);
+ input_line_pointer = saved_ilp;
obj_elf_section (ignore);
return;
}
+
+ section_name = xstrdup (section_name);
+ c = restore_line_pointer (endc);
+
input_line_pointer++;
/* Do we have .section Name<,type><,flag><,entry_size><,alignment> */
section_type = get_absolute_expression ();
else
section_type = 0;
+
if (*input_line_pointer++ == ',')
section_flag = get_absolute_expression ();
else
section_flag = 0;
+
if (*input_line_pointer++ == ',')
section_entry_size = get_absolute_expression ();
else
section_entry_size = 0;
+
if (*input_line_pointer++ == ',')
section_alignment = get_absolute_expression ();
else
section_alignment = 0;
+
/* FIXME: really ignore? */
(void) section_alignment;
- section_name = xstrdup (section_name);
-
/* When using the generic form of .section (as implemented by obj-elf.c),
there's no way to set the section type to SHT_MIPS_DWARF. Users have
traditionally had to fall back on the more common @progbits instead.
do
{
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
symbolP = symbol_find_or_make (name);
S_SET_EXTERNAL (symbolP);
*input_line_pointer = c;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE_AFTER_NAME ();
/* On Irix 5, every global symbol that is not explicitly labelled as
being a function is apparently labelled as being an object. */
char *secname;
asection *sec;
- secname = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&secname);
sec = bfd_get_section_by_name (stdoutput, secname);
if (sec == NULL)
as_bad (_("%s: no such section"), secname);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
if (sec != NULL && (sec->flags & SEC_CODE) != 0)
flag = BSF_FUNCTION;
char *opt;
char c;
- opt = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&opt);
if (*opt == 'O')
{
else
as_warn (_("unrecognized option \"%s\""), opt);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
demand_empty_rest_of_line ();
}
mips_opts.gp = 64;
else if (strcmp (name, "fp=32") == 0)
mips_opts.fp = 32;
+ else if (strcmp (name, "fp=xx") == 0)
+ mips_opts.fp = 0;
else if (strcmp (name, "fp=64") == 0)
mips_opts.fp = 64;
else if (strcmp (name, "softfloat") == 0)
mips_opts.single_float = 1;
else if (strcmp (name, "doublefloat") == 0)
mips_opts.single_float = 0;
+ else if (strcmp (name, "nooddspreg") == 0)
+ mips_opts.oddspreg = 0;
+ else if (strcmp (name, "oddspreg") == 0)
+ mips_opts.oddspreg = 1;
else if (strcmp (name, "mips16") == 0
|| strcmp (name, "MIPS-16") == 0)
mips_opts.mips16 = 1;
{
struct mips_option_stack *s;
- s = (struct mips_option_stack *) xmalloc (sizeof *s);
+ s = XNEW (struct mips_option_stack);
s->next = mips_opts_stack;
s->options = mips_opts;
mips_opts_stack = s;
case 0:
break;
case ISA_MIPS1:
+ /* MIPS I cannot support FPXX. */
+ mips_opts.fp = 32;
+ /* fall-through. */
case ISA_MIPS2:
case ISA_MIPS32:
case ISA_MIPS32R2:
case ISA_MIPS32R3:
case ISA_MIPS32R5:
mips_opts.gp = 32;
- mips_opts.fp = 32;
+ if (mips_opts.fp != 0)
+ mips_opts.fp = 32;
+ break;
+ case ISA_MIPS32R6:
+ mips_opts.gp = 32;
+ mips_opts.fp = 64;
break;
case ISA_MIPS3:
case ISA_MIPS4:
case ISA_MIPS64R2:
case ISA_MIPS64R3:
case ISA_MIPS64R5:
+ case ISA_MIPS64R6:
mips_opts.gp = 64;
- if (mips_opts.arch == CPU_R5900)
- mips_opts.fp = 32;
- else
- mips_opts.fp = 64;
+ if (mips_opts.fp != 0)
+ {
+ if (mips_opts.arch == CPU_R5900)
+ mips_opts.fp = 32;
+ else
+ mips_opts.fp = 64;
+ }
break;
default:
as_bad (_("unknown ISA level %s"), name + 4);
daddu $gp, $gp, $reg1
If $reg2 is given, this results in:
- daddu $reg2, $gp, $0
+ or $reg2, $gp, $0
lui $gp, %hi(%neg(%gp_rel(label)))
addiu $gp, $gp, %lo(%neg(%gp_rel(label)))
daddu $gp, $gp, $reg1
BFD_RELOC_LO16, SP);
}
else
- macro_build (NULL, "daddu", "d,v,t", mips_cpreturn_register,
- mips_gp_register, 0);
+ move_register (mips_cpreturn_register, mips_gp_register);
if (mips_in_shared || HAVE_64BIT_SYMBOLS)
{
ld $gp, offset($sp)
If a register $reg2 was given there, it results in:
- daddu $gp, $reg2, $0 */
+ or $gp, $reg2, $0 */
static void
s_cpreturn (int ignore ATTRIBUTE_UNUSED)
macro_build (&ex, "ld", "t,o(b)", mips_gp_register, BFD_RELOC_LO16, SP);
}
else
- macro_build (NULL, "daddu", "d,v,t", mips_gp_register,
- mips_cpreturn_register, 0);
+ move_register (mips_gp_register, mips_cpreturn_register);
+
macro_end ();
mips_assembling_insn = FALSE;
p = frag_more (4);
md_number_to_chars (p, 0, 4);
fix_new_exp (frag_now, p - frag_now->fr_literal, 4, &ex, FALSE,
- BFD_RELOC_MIPS_EH);
+ BFD_RELOC_32_PCREL);
demand_empty_rest_of_line ();
}
static void
s_insn (int ignore ATTRIBUTE_UNUSED)
{
+ file_mips_check_options ();
+ file_ase_mips16 |= mips_opts.mips16;
+ file_ase_micromips |= mips_opts.micromips;
+
mips_mark_labels ();
demand_empty_rest_of_line ();
if (i == sizeof (str_2008) - 1
&& memcmp (input_line_pointer, str_2008, i) == 0)
- mips_flag_nan2008 = TRUE;
+ mips_nan2008 = 1;
else if (i == sizeof (str_legacy) - 1
&& memcmp (input_line_pointer, str_legacy, i) == 0)
- mips_flag_nan2008 = FALSE;
+ {
+ if (ISA_HAS_LEGACY_NAN (file_mips_opts.isa))
+ mips_nan2008 = 0;
+ else
+ as_bad (_("`%s' does not support legacy NaN"),
+ mips_cpu_info_from_isa (file_mips_opts.isa)->name);
+ }
else
as_bad (_("bad .nan directive"));
symbolS *symbolP;
expressionS exp;
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
symbolP = symbol_find_or_make (name);
S_SET_WEAK (symbolP);
*input_line_pointer = c;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE_AFTER_NAME ();
if (! is_end_of_line[(unsigned char) *input_line_pointer])
{
if (align > 4)
align = 4;
- return ((addr + (1 << align) - 1) & (-1 << align));
+ return ((addr + (1 << align) - 1) & -(1 << align));
}
/* Utility routine, called from above as well. If called while the
if (fixp->fx_addsy == NULL)
return 1;
+ /* Allow relocs used for EH tables. */
+ if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
+ return 1;
+
/* If symbol SYM is in a mergeable section, relocations of the form
SYM + 0 can usually be made section-relative. The mergeable data
is then identified by the section offset rather than by the symbol.
/* There is no place to store an in-place offset for JALR relocations.
Likewise an in-range offset of limited PC-relative relocations may
overflow the in-place relocatable field if recalculated against the
- start address of the symbol's containing section. */
- if (HAVE_IN_PLACE_ADDENDS
+ start address of the symbol's containing section.
+
+ Also, PC relative relocations for MIPS R6 need to be symbol rather than
+ section relative to allow linker relaxations to be performed later on. */
+ if ((HAVE_IN_PLACE_ADDENDS || ISA_IS_R6 (mips_opts.isa))
&& (limited_pcrel_reloc_p (fixp->fx_r_type)
|| jalr_reloc_p (fixp->fx_r_type)))
return 0;
bfd_reloc_code_real_type code;
memset (retval, 0, sizeof(retval));
- reloc = retval[0] = (arelent *) xcalloc (1, sizeof (arelent));
- reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ reloc = retval[0] = XCNEW (arelent);
+ reloc->sym_ptr_ptr = XNEW (asymbol *);
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
|| fixp->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1
|| fixp->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1
|| fixp->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1
- || fixp->fx_r_type == BFD_RELOC_32_PCREL);
+ || fixp->fx_r_type == BFD_RELOC_32_PCREL
+ || fixp->fx_r_type == BFD_RELOC_MIPS_21_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MIPS_26_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MIPS_18_PCREL_S3
+ || fixp->fx_r_type == BFD_RELOC_MIPS_19_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_HI16_S_PCREL
+ || fixp->fx_r_type == BFD_RELOC_LO16_PCREL);
/* At this point, fx_addnumber is "symbol offset - pcrel address".
Relocations want only the symbol offset. */
struct insn_label_list *l;
if (free_insn_labels == NULL)
- l = (struct insn_label_list *) xmalloc (sizeof *l);
+ l = XNEW (struct insn_label_list);
else
{
l = free_insn_labels;
mips_compressed_mark_label (sym);
}
\f
+/* Converting ASE flags from internal to .MIPS.abiflags values. */
+static unsigned int
+mips_convert_ase_flags (int ase)
+{
+ unsigned int ext_ases = 0;
+
+ if (ase & ASE_DSP)
+ ext_ases |= AFL_ASE_DSP;
+ if (ase & ASE_DSPR2)
+ ext_ases |= AFL_ASE_DSPR2;
+ if (ase & ASE_EVA)
+ ext_ases |= AFL_ASE_EVA;
+ if (ase & ASE_MCU)
+ ext_ases |= AFL_ASE_MCU;
+ if (ase & ASE_MDMX)
+ ext_ases |= AFL_ASE_MDMX;
+ if (ase & ASE_MIPS3D)
+ ext_ases |= AFL_ASE_MIPS3D;
+ if (ase & ASE_MT)
+ ext_ases |= AFL_ASE_MT;
+ if (ase & ASE_SMARTMIPS)
+ ext_ases |= AFL_ASE_SMARTMIPS;
+ if (ase & ASE_VIRT)
+ ext_ases |= AFL_ASE_VIRT;
+ if (ase & ASE_MSA)
+ ext_ases |= AFL_ASE_MSA;
+ if (ase & ASE_XPA)
+ ext_ases |= AFL_ASE_XPA;
+
+ return ext_ases;
+}
/* Some special processing for a MIPS ELF file. */
void
mips_elf_final_processing (void)
{
+ int fpabi;
+ Elf_Internal_ABIFlags_v0 flags;
+
+ flags.version = 0;
+ flags.isa_rev = 0;
+ switch (file_mips_opts.isa)
+ {
+ case INSN_ISA1:
+ flags.isa_level = 1;
+ break;
+ case INSN_ISA2:
+ flags.isa_level = 2;
+ break;
+ case INSN_ISA3:
+ flags.isa_level = 3;
+ break;
+ case INSN_ISA4:
+ flags.isa_level = 4;
+ break;
+ case INSN_ISA5:
+ flags.isa_level = 5;
+ break;
+ case INSN_ISA32:
+ flags.isa_level = 32;
+ flags.isa_rev = 1;
+ break;
+ case INSN_ISA32R2:
+ flags.isa_level = 32;
+ flags.isa_rev = 2;
+ break;
+ case INSN_ISA32R3:
+ flags.isa_level = 32;
+ flags.isa_rev = 3;
+ break;
+ case INSN_ISA32R5:
+ flags.isa_level = 32;
+ flags.isa_rev = 5;
+ break;
+ case INSN_ISA32R6:
+ flags.isa_level = 32;
+ flags.isa_rev = 6;
+ break;
+ case INSN_ISA64:
+ flags.isa_level = 64;
+ flags.isa_rev = 1;
+ break;
+ case INSN_ISA64R2:
+ flags.isa_level = 64;
+ flags.isa_rev = 2;
+ break;
+ case INSN_ISA64R3:
+ flags.isa_level = 64;
+ flags.isa_rev = 3;
+ break;
+ case INSN_ISA64R5:
+ flags.isa_level = 64;
+ flags.isa_rev = 5;
+ break;
+ case INSN_ISA64R6:
+ flags.isa_level = 64;
+ flags.isa_rev = 6;
+ break;
+ }
+
+ flags.gpr_size = file_mips_opts.gp == 32 ? AFL_REG_32 : AFL_REG_64;
+ flags.cpr1_size = file_mips_opts.soft_float ? AFL_REG_NONE
+ : (file_mips_opts.ase & ASE_MSA) ? AFL_REG_128
+ : (file_mips_opts.fp == 64) ? AFL_REG_64
+ : AFL_REG_32;
+ flags.cpr2_size = AFL_REG_NONE;
+ flags.fp_abi = bfd_elf_get_obj_attr_int (stdoutput, OBJ_ATTR_GNU,
+ Tag_GNU_MIPS_ABI_FP);
+ flags.isa_ext = bfd_mips_isa_ext (stdoutput);
+ flags.ases = mips_convert_ase_flags (file_mips_opts.ase);
+ if (file_ase_mips16)
+ flags.ases |= AFL_ASE_MIPS16;
+ if (file_ase_micromips)
+ flags.ases |= AFL_ASE_MICROMIPS;
+ flags.flags1 = 0;
+ if ((ISA_HAS_ODD_SINGLE_FPR (file_mips_opts.isa, file_mips_opts.arch)
+ || file_mips_opts.fp == 64)
+ && file_mips_opts.oddspreg)
+ flags.flags1 |= AFL_FLAGS1_ODDSPREG;
+ flags.flags2 = 0;
+
+ bfd_mips_elf_swap_abiflags_v0_out (stdoutput, &flags,
+ ((Elf_External_ABIFlags_v0 *)
+ mips_flags_frag));
+
/* Write out the register information. */
if (mips_abi != N64_ABI)
{
if (mips_32bitmode)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_32BITMODE;
- if (mips_flag_nan2008)
+ if (mips_nan2008 == 1)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_NAN2008;
/* 32 bit code with 64 bit FP registers. */
- if (file_mips_opts.fp == 64 && ABI_NEEDS_32BIT_REGS (mips_abi))
+ fpabi = bfd_elf_get_obj_attr_int (stdoutput, OBJ_ATTR_GNU,
+ Tag_GNU_MIPS_ABI_FP);
+ if (fpabi == Val_GNU_MIPS_ABI_FP_OLD_64)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_FP64;
}
\f
if (p && cur_proc_ptr)
{
OBJ_SYMFIELD_TYPE *obj = symbol_get_obj (p);
- expressionS *exp = xmalloc (sizeof (expressionS));
+ expressionS *exp = XNEW (expressionS);
obj->size = exp;
exp->X_op = O_subtract;
{ "mips32r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
{ "mips32r3", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R3, CPU_MIPS32R3 },
{ "mips32r5", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R5, CPU_MIPS32R5 },
+ { "mips32r6", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R6, CPU_MIPS32R6 },
{ "mips64", MIPS_CPU_IS_ISA, 0, ISA_MIPS64, CPU_MIPS64 },
{ "mips64r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R2, CPU_MIPS64R2 },
{ "mips64r3", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R3, CPU_MIPS64R3 },
{ "mips64r5", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R5, CPU_MIPS64R5 },
+ { "mips64r6", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R6, CPU_MIPS64R6 },
/* MIPS I */
{ "r3000", 0, 0, ISA_MIPS1, CPU_R3000 },
{ "1004kf2_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
{ "1004kf", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
{ "1004kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* interaptiv is the new name for 1004kf */
+ { "interaptiv", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* M5100 family */
+ { "m5100", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
+ { "m5101", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
/* P5600 with EVA and Virtualization ASEs, other ASEs are optional. */
{ "p5600", 0, ASE_VIRT | ASE_EVA | ASE_XPA, ISA_MIPS32R5, CPU_MIPS32R5 },
{ "sb1", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
/* Broadcom SB-1A CPU core */
{ "sb1a", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
-
+
{ "loongson3a", 0, 0, ISA_MIPS64R2, CPU_LOONGSON_3A },
/* MIPS 64 Release 2 */
{ "octeon", 0, 0, ISA_MIPS64R2, CPU_OCTEON },
{ "octeon+", 0, 0, ISA_MIPS64R2, CPU_OCTEONP },
{ "octeon2", 0, 0, ISA_MIPS64R2, CPU_OCTEON2 },
+ { "octeon3", 0, ASE_VIRT | ASE_VIRT64, ISA_MIPS64R5, CPU_OCTEON3 },
/* RMI Xlr */
{ "xlr", 0, 0, ISA_MIPS64, CPU_XLR },
MIPS64R2 rather than MIPS64. */
{ "xlp", 0, 0, ISA_MIPS64R2, CPU_XLR },
+ /* i6400. */
+ { "i6400", 0, ASE_MSA, ISA_MIPS64R6, CPU_MIPS64R6},
+
/* End marker */
{ NULL, 0, 0, 0, 0 }
};
-mips32r2 generate MIPS32 release 2 ISA instructions\n\
-mips32r3 generate MIPS32 release 3 ISA instructions\n\
-mips32r5 generate MIPS32 release 5 ISA instructions\n\
+-mips32r6 generate MIPS32 release 6 ISA instructions\n\
-mips64 generate MIPS64 ISA instructions\n\
-mips64r2 generate MIPS64 release 2 ISA instructions\n\
-mips64r3 generate MIPS64 release 3 ISA instructions\n\
-mips64r5 generate MIPS64 release 5 ISA instructions\n\
+-mips64r6 generate MIPS64 release 6 ISA instructions\n\
-march=CPU/-mtune=CPU generate code/schedule for CPU, where CPU is one of:\n"));
first = 1;
-mno-micromips do not generate microMIPS instructions\n"));
fprintf (stream, _("\
-msmartmips generate smartmips instructions\n\
--mno-smartmips do not generate smartmips instructions\n"));
+-mno-smartmips do not generate smartmips instructions\n"));
fprintf (stream, _("\
-mdsp generate DSP instructions\n\
-mno-dsp do not generate DSP instructions\n"));
void
md_mips_end (void)
{
+ int fpabi = Val_GNU_MIPS_ABI_FP_ANY;
+
mips_emit_delays ();
if (cur_proc_ptr)
as_warn (_("missing .end at end of assembly"));
/* Just in case no code was emitted, do the consistency check. */
file_mips_check_options ();
+
+ /* Set a floating-point ABI if the user did not. */
+ if (obj_elf_seen_attribute (OBJ_ATTR_GNU, Tag_GNU_MIPS_ABI_FP))
+ {
+ /* Perform consistency checks on the floating-point ABI. */
+ fpabi = bfd_elf_get_obj_attr_int (stdoutput, OBJ_ATTR_GNU,
+ Tag_GNU_MIPS_ABI_FP);
+ if (fpabi != Val_GNU_MIPS_ABI_FP_ANY)
+ check_fpabi (fpabi);
+ }
+ else
+ {
+ /* Soft-float gets precedence over single-float, the two options should
+ not be used together so this should not matter. */
+ if (file_mips_opts.soft_float == 1)
+ fpabi = Val_GNU_MIPS_ABI_FP_SOFT;
+ /* Single-float gets precedence over all double_float cases. */
+ else if (file_mips_opts.single_float == 1)
+ fpabi = Val_GNU_MIPS_ABI_FP_SINGLE;
+ else
+ {
+ switch (file_mips_opts.fp)
+ {
+ case 32:
+ if (file_mips_opts.gp == 32)
+ fpabi = Val_GNU_MIPS_ABI_FP_DOUBLE;
+ break;
+ case 0:
+ fpabi = Val_GNU_MIPS_ABI_FP_XX;
+ break;
+ case 64:
+ if (file_mips_opts.gp == 32 && !file_mips_opts.oddspreg)
+ fpabi = Val_GNU_MIPS_ABI_FP_64A;
+ else if (file_mips_opts.gp == 32)
+ fpabi = Val_GNU_MIPS_ABI_FP_64;
+ else
+ fpabi = Val_GNU_MIPS_ABI_FP_DOUBLE;
+ break;
+ }
+ }
+
+ bfd_elf_add_obj_attr_int (stdoutput, OBJ_ATTR_GNU,
+ Tag_GNU_MIPS_ABI_FP, fpabi);
+ }
+}
+
+/* Returns the relocation type required for a particular CFI encoding. */
+
+bfd_reloc_code_real_type
+mips_cfi_reloc_for_encoding (int encoding)
+{
+ if (encoding == (DW_EH_PE_sdata4 | DW_EH_PE_pcrel))
+ return BFD_RELOC_32_PCREL;
+ else return BFD_RELOC_NONE;
}
projects / deliverable / binutils-gdb.git / blobdiff