You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
#include "as.h"
#include "config.h"
#include "opcode/mips.h"
#include "itbl-ops.h"
#include "dwarf2dbg.h"
+#include "dw2gencfi.h"
#ifdef DEBUG
#define DBG(x) printf x
? ".rodata" \
: (abort (), ""))
+/* Information about an instruction, including its format, operands
+ and fixups. */
+struct mips_cl_insn
+{
+ /* The opcode's entry in mips_opcodes or mips16_opcodes. */
+ const struct mips_opcode *insn_mo;
+
+ /* True if this is a mips16 instruction and if we want the extended
+ form of INSN_MO. */
+ bfd_boolean use_extend;
+
+ /* The 16-bit extension instruction to use when USE_EXTEND is true. */
+ unsigned short extend;
+
+ /* The 16-bit or 32-bit bitstring of the instruction itself. This is
+ a copy of INSN_MO->match with the operands filled in. */
+ unsigned long insn_opcode;
+
+ /* The frag that contains the instruction. */
+ struct frag *frag;
+
+ /* The offset into FRAG of the first instruction byte. */
+ long where;
+
+ /* The relocs associated with the instruction, if any. */
+ fixS *fixp[3];
+
+ /* True if this entry cannot be moved from its current position. */
+ unsigned int fixed_p : 1;
+
+ /* True if this instruction occurred in a .set noreorder block. */
+ unsigned int noreorder_p : 1;
+
+ /* True for mips16 instructions that jump to an absolute address. */
+ unsigned int mips16_absolute_jump_p : 1;
+};
+
/* The ABI to use. */
enum mips_abi_level
{
command line options, and based on the default architecture. */
int ase_mips3d;
int ase_mdmx;
+ int ase_smartmips;
+ int ase_dsp;
+ int ase_mt;
/* Whether we are assembling for the mips16 processor. 0 if we are
not, 1 if we are, and -1 if the value has not been initialized.
Changed by `.set mips16' and `.set nomips16', and the -mips16 and
/* MIPS architecture (CPU) type. Changed by .set arch=FOO, the -march
command line option, and the default CPU. */
int arch;
+ /* True if ".set sym32" is in effect. */
+ bfd_boolean sym32;
};
/* True if -mgp32 was passed. */
static struct mips_set_options mips_opts =
{
- ISA_UNKNOWN, -1, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0, CPU_UNKNOWN
+ ISA_UNKNOWN, -1, -1, 0, -1, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0, CPU_UNKNOWN, FALSE
};
/* These variables are filled in with the masks of registers used.
command line (e.g., by -march). */
static int file_ase_mdmx;
+/* True if -msmartmips was passed or implied by arguments passed on the
+ command line (e.g., by -march). */
+static int file_ase_smartmips;
+
+#define ISA_SUPPORTS_SMARTMIPS (mips_opts.isa == ISA_MIPS32 \
+ || mips_opts.isa == ISA_MIPS32R2)
+
+/* True if -mdsp was passed or implied by arguments passed on the
+ command line (e.g., by -march). */
+static int file_ase_dsp;
+
+#define ISA_SUPPORTS_DSP_ASE (mips_opts.isa == ISA_MIPS32R2 \
+ || mips_opts.isa == ISA_MIPS64R2)
+
+/* True if -mmt was passed or implied by arguments passed on the
+ command line (e.g., by -march). */
+static int file_ase_mt;
+
+#define ISA_SUPPORTS_MT_ASE (mips_opts.isa == ISA_MIPS32R2 \
+ || mips_opts.isa == ISA_MIPS64R2)
+
/* The argument of the -march= flag. The architecture we are assembling. */
static int file_mips_arch = CPU_UNKNOWN;
static const char *mips_arch_string;
#define ABI_NEEDS_32BIT_REGS(ABI) ((ABI) == O32_ABI)
/* Likewise 64-bit registers. */
-#define ABI_NEEDS_64BIT_REGS(ABI) \
- ((ABI) == N32_ABI \
- || (ABI) == N64_ABI \
+#define ABI_NEEDS_64BIT_REGS(ABI) \
+ ((ABI) == N32_ABI \
+ || (ABI) == N64_ABI \
|| (ABI) == O64_ABI)
-/* Return true if ISA supports 64 bit gp register instructions. */
-#define ISA_HAS_64BIT_REGS(ISA) ( \
- (ISA) == ISA_MIPS3 \
- || (ISA) == ISA_MIPS4 \
- || (ISA) == ISA_MIPS5 \
- || (ISA) == ISA_MIPS64 \
- || (ISA) == ISA_MIPS64R2 \
- )
+/* Return true if ISA supports 64 bit wide gp registers. */
+#define ISA_HAS_64BIT_REGS(ISA) \
+ ((ISA) == ISA_MIPS3 \
+ || (ISA) == ISA_MIPS4 \
+ || (ISA) == ISA_MIPS5 \
+ || (ISA) == ISA_MIPS64 \
+ || (ISA) == ISA_MIPS64R2)
+
+/* Return true if ISA supports 64 bit wide float registers. */
+#define ISA_HAS_64BIT_FPRS(ISA) \
+ ((ISA) == ISA_MIPS3 \
+ || (ISA) == ISA_MIPS4 \
+ || (ISA) == ISA_MIPS5 \
+ || (ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS64 \
+ || (ISA) == ISA_MIPS64R2)
/* Return true if ISA supports 64-bit right rotate (dror et al.)
instructions. */
-#define ISA_HAS_DROR(ISA) ( \
- (ISA) == ISA_MIPS64R2 \
- )
+#define ISA_HAS_DROR(ISA) \
+ ((ISA) == ISA_MIPS64R2)
/* Return true if ISA supports 32-bit right rotate (ror et al.)
instructions. */
-#define ISA_HAS_ROR(ISA) ( \
- (ISA) == ISA_MIPS32R2 \
- || (ISA) == ISA_MIPS64R2 \
- )
+#define ISA_HAS_ROR(ISA) \
+ ((ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS64R2 \
+ || mips_opts.ase_smartmips)
+
+/* Return true if ISA supports single-precision floats in odd registers. */
+#define ISA_HAS_ODD_SINGLE_FPR(ISA) \
+ ((ISA) == ISA_MIPS32 \
+ || (ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS64 \
+ || (ISA) == ISA_MIPS64R2)
+
+/* Return true if ISA supports move to/from high part of a 64-bit
+ floating-point register. */
+#define ISA_HAS_MXHC1(ISA) \
+ ((ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS64R2)
#define HAVE_32BIT_GPRS \
- (mips_opts.gp32 || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ (mips_opts.gp32 || !ISA_HAS_64BIT_REGS (mips_opts.isa))
#define HAVE_32BIT_FPRS \
- (mips_opts.fp32 || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ (mips_opts.fp32 || !ISA_HAS_64BIT_FPRS (mips_opts.isa))
-#define HAVE_64BIT_GPRS (! HAVE_32BIT_GPRS)
-#define HAVE_64BIT_FPRS (! HAVE_32BIT_FPRS)
+#define HAVE_64BIT_GPRS (!HAVE_32BIT_GPRS)
+#define HAVE_64BIT_FPRS (!HAVE_32BIT_FPRS)
#define HAVE_NEWABI (mips_abi == N32_ABI || mips_abi == N64_ABI)
/* True if relocations are stored in-place. */
#define HAVE_IN_PLACE_ADDENDS (!HAVE_NEWABI)
-/* We can only have 64bit addresses if the object file format supports it. */
-#define HAVE_32BIT_ADDRESSES \
- (HAVE_32BIT_GPRS \
- || (bfd_arch_bits_per_address (stdoutput) == 32 \
- || ! HAVE_64BIT_OBJECTS)) \
+/* The ABI-derived address size. */
+#define HAVE_64BIT_ADDRESSES \
+ (HAVE_64BIT_GPRS && (mips_abi == EABI_ABI || mips_abi == N64_ABI))
+#define HAVE_32BIT_ADDRESSES (!HAVE_64BIT_ADDRESSES)
-#define HAVE_64BIT_ADDRESSES (! HAVE_32BIT_ADDRESSES)
+/* The size of symbolic constants (i.e., expressions of the form
+ "SYMBOL" or "SYMBOL + OFFSET"). */
+#define HAVE_32BIT_SYMBOLS \
+ (HAVE_32BIT_ADDRESSES || !HAVE_64BIT_OBJECTS || mips_opts.sym32)
+#define HAVE_64BIT_SYMBOLS (!HAVE_32BIT_SYMBOLS)
/* Addresses are loaded in different ways, depending on the address size
in use. The n32 ABI Documentation also mandates the use of additions
#define CPU_HAS_MDMX(cpu) (FALSE \
)
+/* Return true if the given CPU supports the DSP ASE. */
+#define CPU_HAS_DSP(cpu) (FALSE \
+ )
+
+/* Return true if the given CPU supports the MT ASE. */
+#define CPU_HAS_MT(cpu) (FALSE \
+ )
+
/* True if CPU has a dror instruction. */
#define CPU_HAS_DROR(CPU) ((CPU) == CPU_VR5400 || (CPU) == CPU_VR5500)
equivalent to seeing no -g option at all. */
static int mips_debug = 0;
-/* The previous instruction. */
-static struct mips_cl_insn prev_insn;
-
-/* The instruction before prev_insn. */
-static struct mips_cl_insn prev_prev_insn;
-
-/* If we don't want information for prev_insn or prev_prev_insn, we
- point the insn_mo field at this dummy integer. */
-static const struct mips_opcode dummy_opcode = { NULL, NULL, 0, 0, 0, 0, 0 };
-
-/* Non-zero if prev_insn is valid. */
-static int prev_insn_valid;
+/* The maximum number of NOPs needed to avoid the VR4130 mflo/mfhi errata. */
+#define MAX_VR4130_NOPS 4
-/* The frag for the previous instruction. */
-static struct frag *prev_insn_frag;
+/* The maximum number of NOPs needed to fill delay slots. */
+#define MAX_DELAY_NOPS 2
-/* The offset into prev_insn_frag for the previous instruction. */
-static long prev_insn_where;
+/* The maximum number of NOPs needed for any purpose. */
+#define MAX_NOPS 4
-/* The reloc type for the previous instruction, if any. */
-static bfd_reloc_code_real_type prev_insn_reloc_type[3];
+/* A list of previous instructions, with index 0 being the most recent.
+ We need to look back MAX_NOPS instructions when filling delay slots
+ or working around processor errata. We need to look back one
+ instruction further if we're thinking about using history[0] to
+ fill a branch delay slot. */
+static struct mips_cl_insn history[1 + MAX_NOPS];
-/* The reloc for the previous instruction, if any. */
-static fixS *prev_insn_fixp[3];
+/* Nop instructions used by emit_nop. */
+static struct mips_cl_insn nop_insn, mips16_nop_insn;
-/* Non-zero if the previous instruction was in a delay slot. */
-static int prev_insn_is_delay_slot;
-
-/* Non-zero if the previous instruction was in a .set noreorder. */
-static int prev_insn_unreordered;
-
-/* Non-zero if the previous instruction uses an extend opcode (if
- mips16). */
-static int prev_insn_extended;
-
-/* Non-zero if the previous previous instruction was in a .set
- noreorder. */
-static int prev_prev_insn_unreordered;
+/* The appropriate nop for the current mode. */
+#define NOP_INSN (mips_opts.mips16 ? &mips16_nop_insn : &nop_insn)
/* If this is set, it points to a frag holding nop instructions which
were inserted before the start of a noreorder section. If those
16, 17, 2, 3, 4, 5, 6, 7
};
+/* Classifies the kind of instructions we're interested in when
+ implementing -mfix-vr4120. */
+enum fix_vr4120_class {
+ FIX_VR4120_MACC,
+ FIX_VR4120_DMACC,
+ FIX_VR4120_MULT,
+ FIX_VR4120_DMULT,
+ FIX_VR4120_DIV,
+ FIX_VR4120_MTHILO,
+ NUM_FIX_VR4120_CLASSES
+};
+
+/* Given two FIX_VR4120_* values X and Y, bit Y of element X is set if
+ there must be at least one other instruction between an instruction
+ of type X and an instruction of type Y. */
+static unsigned int vr4120_conflicts[NUM_FIX_VR4120_CLASSES];
+
+/* True if -mfix-vr4120 is in force. */
static int mips_fix_vr4120;
+/* ...likewise -mfix-vr4130. */
+static int mips_fix_vr4130;
+
/* We don't relax branches by default, since this causes us to expand
`la .l2 - .l1' if there's a branch between .l1 and .l2, because we
fail to compute the offset before expanding the macro to the most
(((x) &~ (offsetT) 0x7fff) == 0 \
|| (((x) &~ (offsetT) 0x7fff) == ~ (offsetT) 0x7fff))
+/* Is the given value a zero-extended 32-bit value? Or a negated one? */
+#define IS_ZEXT_32BIT_NUM(x) \
+ (((x) &~ (offsetT) 0xffffffff) == 0 \
+ || (((x) &~ (offsetT) 0xffffffff) == ~ (offsetT) 0xffffffff))
+
+/* Replace bits MASK << SHIFT of STRUCT with the equivalent bits in
+ VALUE << SHIFT. VALUE is evaluated exactly once. */
+#define INSERT_BITS(STRUCT, VALUE, MASK, SHIFT) \
+ (STRUCT) = (((STRUCT) & ~((MASK) << (SHIFT))) \
+ | (((VALUE) & (MASK)) << (SHIFT)))
+
+/* Extract bits MASK << SHIFT from STRUCT and shift them right
+ SHIFT places. */
+#define EXTRACT_BITS(STRUCT, MASK, SHIFT) \
+ (((STRUCT) >> (SHIFT)) & (MASK))
+
+/* Change INSN's opcode so that the operand given by FIELD has value VALUE.
+ INSN is a mips_cl_insn structure and VALUE is evaluated exactly once.
+
+ include/opcode/mips.h specifies operand fields using the macros
+ OP_MASK_<FIELD> and OP_SH_<FIELD>. The MIPS16 equivalents start
+ with "MIPS16OP" instead of "OP". */
+#define INSERT_OPERAND(FIELD, INSN, VALUE) \
+ INSERT_BITS ((INSN).insn_opcode, VALUE, OP_MASK_##FIELD, OP_SH_##FIELD)
+#define MIPS16_INSERT_OPERAND(FIELD, INSN, VALUE) \
+ INSERT_BITS ((INSN).insn_opcode, VALUE, \
+ MIPS16OP_MASK_##FIELD, MIPS16OP_SH_##FIELD)
+
+/* Extract the operand given by FIELD from mips_cl_insn INSN. */
+#define EXTRACT_OPERAND(FIELD, INSN) \
+ EXTRACT_BITS ((INSN).insn_opcode, OP_MASK_##FIELD, OP_SH_##FIELD)
+#define MIPS16_EXTRACT_OPERAND(FIELD, INSN) \
+ EXTRACT_BITS ((INSN).insn_opcode, \
+ MIPS16OP_MASK_##FIELD, \
+ MIPS16OP_SH_##FIELD)
\f
/* Global variables used when generating relaxable macros. See the
comment above RELAX_ENCODE for more details about how relaxation
static void append_insn
(struct mips_cl_insn *ip, expressionS *p, bfd_reloc_code_real_type *r);
-static void mips_no_prev_insn (int);
+static void mips_no_prev_insn (void);
static void mips16_macro_build
(expressionS *, const char *, const char *, va_list);
static void load_register (int, expressionS *, int);
struct mips_cpu_info
{
const char *name; /* CPU or ISA name. */
- int is_isa; /* Is this an ISA? (If 0, a CPU.) */
+ int flags; /* ASEs available, or ISA flag. */
int isa; /* ISA level. */
int cpu; /* CPU number (default CPU if ISA). */
};
+#define MIPS_CPU_IS_ISA 0x0001 /* Is this an ISA? (If 0, a CPU.) */
+#define MIPS_CPU_ASE_SMARTMIPS 0x0002 /* CPU implements SmartMIPS ASE */
+#define MIPS_CPU_ASE_DSP 0x0004 /* CPU implements DSP ASE */
+#define MIPS_CPU_ASE_MT 0x0008 /* CPU implements MT ASE */
+#define MIPS_CPU_ASE_MIPS3D 0x0010 /* CPU implements MIPS-3D ASE */
+#define MIPS_CPU_ASE_MDMX 0x0020 /* CPU implements MDMX ASE */
+
static const struct mips_cpu_info *mips_parse_cpu (const char *, const char *);
static const struct mips_cpu_info *mips_cpu_info_from_isa (int);
static const struct mips_cpu_info *mips_cpu_info_from_arch (int);
case bfd_target_coff_flavour:
return "pe-mips";
case bfd_target_elf_flavour:
+#ifdef TE_VXWORKS
+ if (!HAVE_64BIT_OBJECTS && !HAVE_NEWABI)
+ return (target_big_endian
+ ? "elf32-bigmips-vxworks"
+ : "elf32-littlemips-vxworks");
+#endif
#ifdef TE_TMIPS
/* This is traditional mips. */
return (target_big_endian
}
}
-/* This function is called once, at assembler startup time. It should
- set up all the tables, etc. that the MD part of the assembler will need. */
+/* Return the length of instruction INSN. */
+
+static inline unsigned int
+insn_length (const struct mips_cl_insn *insn)
+{
+ if (!mips_opts.mips16)
+ return 4;
+ return insn->mips16_absolute_jump_p || insn->use_extend ? 4 : 2;
+}
+
+/* Initialise INSN from opcode entry MO. Leave its position unspecified. */
+
+static void
+create_insn (struct mips_cl_insn *insn, const struct mips_opcode *mo)
+{
+ size_t i;
+
+ insn->insn_mo = mo;
+ insn->use_extend = FALSE;
+ insn->extend = 0;
+ insn->insn_opcode = mo->match;
+ insn->frag = NULL;
+ insn->where = 0;
+ for (i = 0; i < ARRAY_SIZE (insn->fixp); i++)
+ insn->fixp[i] = NULL;
+ insn->fixed_p = (mips_opts.noreorder > 0);
+ insn->noreorder_p = (mips_opts.noreorder > 0);
+ insn->mips16_absolute_jump_p = 0;
+}
+
+/* Install INSN at the location specified by its "frag" and "where" fields. */
+
+static void
+install_insn (const struct mips_cl_insn *insn)
+{
+ char *f = insn->frag->fr_literal + insn->where;
+ if (!mips_opts.mips16)
+ md_number_to_chars (f, insn->insn_opcode, 4);
+ else if (insn->mips16_absolute_jump_p)
+ {
+ md_number_to_chars (f, insn->insn_opcode >> 16, 2);
+ md_number_to_chars (f + 2, insn->insn_opcode & 0xffff, 2);
+ }
+ else
+ {
+ if (insn->use_extend)
+ {
+ md_number_to_chars (f, 0xf000 | insn->extend, 2);
+ f += 2;
+ }
+ md_number_to_chars (f, insn->insn_opcode, 2);
+ }
+}
+
+/* Move INSN to offset WHERE in FRAG. Adjust the fixups accordingly
+ and install the opcode in the new location. */
+
+static void
+move_insn (struct mips_cl_insn *insn, fragS *frag, long where)
+{
+ size_t i;
+
+ insn->frag = frag;
+ insn->where = where;
+ for (i = 0; i < ARRAY_SIZE (insn->fixp); i++)
+ if (insn->fixp[i] != NULL)
+ {
+ insn->fixp[i]->fx_frag = frag;
+ insn->fixp[i]->fx_where = where;
+ }
+ install_insn (insn);
+}
+
+/* Add INSN to the end of the output. */
+
+static void
+add_fixed_insn (struct mips_cl_insn *insn)
+{
+ char *f = frag_more (insn_length (insn));
+ move_insn (insn, frag_now, f - frag_now->fr_literal);
+}
+
+/* Start a variant frag and move INSN to the start of the variant part,
+ marking it as fixed. The other arguments are as for frag_var. */
+
+static void
+add_relaxed_insn (struct mips_cl_insn *insn, int max_chars, int var,
+ relax_substateT subtype, symbolS *symbol, offsetT offset)
+{
+ frag_grow (max_chars);
+ move_insn (insn, frag_now, frag_more (0) - frag_now->fr_literal);
+ insn->fixed_p = 1;
+ frag_var (rs_machine_dependent, max_chars, var,
+ subtype, symbol, offset, NULL);
+}
+
+/* Insert N copies of INSN into the history buffer, starting at
+ position FIRST. Neither FIRST nor N need to be clipped. */
+
+static void
+insert_into_history (unsigned int first, unsigned int n,
+ const struct mips_cl_insn *insn)
+{
+ if (mips_relax.sequence != 2)
+ {
+ unsigned int i;
+
+ for (i = ARRAY_SIZE (history); i-- > first;)
+ if (i >= first + n)
+ history[i] = history[i - n];
+ else
+ history[i] = *insn;
+ }
+}
+
+/* Emit a nop instruction, recording it in the history buffer. */
+
+static void
+emit_nop (void)
+{
+ add_fixed_insn (NOP_INSN);
+ insert_into_history (0, 1, NOP_INSN);
+}
+
+/* Initialize vr4120_conflicts. There is a bit of duplication here:
+ the idea is to make it obvious at a glance that each errata is
+ included. */
+
+static void
+init_vr4120_conflicts (void)
+{
+#define CONFLICT(FIRST, SECOND) \
+ vr4120_conflicts[FIX_VR4120_##FIRST] |= 1 << FIX_VR4120_##SECOND
+
+ /* Errata 21 - [D]DIV[U] after [D]MACC */
+ CONFLICT (MACC, DIV);
+ CONFLICT (DMACC, DIV);
+
+ /* Errata 23 - Continuous DMULT[U]/DMACC instructions. */
+ CONFLICT (DMULT, DMULT);
+ CONFLICT (DMULT, DMACC);
+ CONFLICT (DMACC, DMULT);
+ CONFLICT (DMACC, DMACC);
+
+ /* Errata 24 - MT{LO,HI} after [D]MACC */
+ CONFLICT (MACC, MTHILO);
+ CONFLICT (DMACC, MTHILO);
+
+ /* VR4181A errata MD(1): "If a MULT, MULTU, DMULT or DMULTU
+ instruction is executed immediately after a MACC or DMACC
+ instruction, the result of [either instruction] is incorrect." */
+ CONFLICT (MACC, MULT);
+ CONFLICT (MACC, DMULT);
+ CONFLICT (DMACC, MULT);
+ CONFLICT (DMACC, DMULT);
+
+ /* VR4181A errata MD(4): "If a MACC or DMACC instruction is
+ executed immediately after a DMULT, DMULTU, DIV, DIVU,
+ DDIV or DDIVU instruction, the result of the MACC or
+ DMACC instruction is incorrect.". */
+ CONFLICT (DMULT, MACC);
+ CONFLICT (DMULT, DMACC);
+ CONFLICT (DIV, MACC);
+ CONFLICT (DIV, DMACC);
+
+#undef CONFLICT
+}
+
+struct regname {
+ const char *name;
+ unsigned int num;
+};
+
+#define RTYPE_MASK 0x1ff00
+#define RTYPE_NUM 0x00100
+#define RTYPE_FPU 0x00200
+#define RTYPE_FCC 0x00400
+#define RTYPE_VEC 0x00800
+#define RTYPE_GP 0x01000
+#define RTYPE_CP0 0x02000
+#define RTYPE_PC 0x04000
+#define RTYPE_ACC 0x08000
+#define RTYPE_CCC 0x10000
+#define RNUM_MASK 0x000ff
+#define RWARN 0x80000
+
+#define GENERIC_REGISTER_NUMBERS \
+ {"$0", RTYPE_NUM | 0}, \
+ {"$1", RTYPE_NUM | 1}, \
+ {"$2", RTYPE_NUM | 2}, \
+ {"$3", RTYPE_NUM | 3}, \
+ {"$4", RTYPE_NUM | 4}, \
+ {"$5", RTYPE_NUM | 5}, \
+ {"$6", RTYPE_NUM | 6}, \
+ {"$7", RTYPE_NUM | 7}, \
+ {"$8", RTYPE_NUM | 8}, \
+ {"$9", RTYPE_NUM | 9}, \
+ {"$10", RTYPE_NUM | 10}, \
+ {"$11", RTYPE_NUM | 11}, \
+ {"$12", RTYPE_NUM | 12}, \
+ {"$13", RTYPE_NUM | 13}, \
+ {"$14", RTYPE_NUM | 14}, \
+ {"$15", RTYPE_NUM | 15}, \
+ {"$16", RTYPE_NUM | 16}, \
+ {"$17", RTYPE_NUM | 17}, \
+ {"$18", RTYPE_NUM | 18}, \
+ {"$19", RTYPE_NUM | 19}, \
+ {"$20", RTYPE_NUM | 20}, \
+ {"$21", RTYPE_NUM | 21}, \
+ {"$22", RTYPE_NUM | 22}, \
+ {"$23", RTYPE_NUM | 23}, \
+ {"$24", RTYPE_NUM | 24}, \
+ {"$25", RTYPE_NUM | 25}, \
+ {"$26", RTYPE_NUM | 26}, \
+ {"$27", RTYPE_NUM | 27}, \
+ {"$28", RTYPE_NUM | 28}, \
+ {"$29", RTYPE_NUM | 29}, \
+ {"$30", RTYPE_NUM | 30}, \
+ {"$31", RTYPE_NUM | 31}
+
+#define FPU_REGISTER_NAMES \
+ {"$f0", RTYPE_FPU | 0}, \
+ {"$f1", RTYPE_FPU | 1}, \
+ {"$f2", RTYPE_FPU | 2}, \
+ {"$f3", RTYPE_FPU | 3}, \
+ {"$f4", RTYPE_FPU | 4}, \
+ {"$f5", RTYPE_FPU | 5}, \
+ {"$f6", RTYPE_FPU | 6}, \
+ {"$f7", RTYPE_FPU | 7}, \
+ {"$f8", RTYPE_FPU | 8}, \
+ {"$f9", RTYPE_FPU | 9}, \
+ {"$f10", RTYPE_FPU | 10}, \
+ {"$f11", RTYPE_FPU | 11}, \
+ {"$f12", RTYPE_FPU | 12}, \
+ {"$f13", RTYPE_FPU | 13}, \
+ {"$f14", RTYPE_FPU | 14}, \
+ {"$f15", RTYPE_FPU | 15}, \
+ {"$f16", RTYPE_FPU | 16}, \
+ {"$f17", RTYPE_FPU | 17}, \
+ {"$f18", RTYPE_FPU | 18}, \
+ {"$f19", RTYPE_FPU | 19}, \
+ {"$f20", RTYPE_FPU | 20}, \
+ {"$f21", RTYPE_FPU | 21}, \
+ {"$f22", RTYPE_FPU | 22}, \
+ {"$f23", RTYPE_FPU | 23}, \
+ {"$f24", RTYPE_FPU | 24}, \
+ {"$f25", RTYPE_FPU | 25}, \
+ {"$f26", RTYPE_FPU | 26}, \
+ {"$f27", RTYPE_FPU | 27}, \
+ {"$f28", RTYPE_FPU | 28}, \
+ {"$f29", RTYPE_FPU | 29}, \
+ {"$f30", RTYPE_FPU | 30}, \
+ {"$f31", RTYPE_FPU | 31}
+
+#define FPU_CONDITION_CODE_NAMES \
+ {"$fcc0", RTYPE_FCC | 0}, \
+ {"$fcc1", RTYPE_FCC | 1}, \
+ {"$fcc2", RTYPE_FCC | 2}, \
+ {"$fcc3", RTYPE_FCC | 3}, \
+ {"$fcc4", RTYPE_FCC | 4}, \
+ {"$fcc5", RTYPE_FCC | 5}, \
+ {"$fcc6", RTYPE_FCC | 6}, \
+ {"$fcc7", RTYPE_FCC | 7}
+
+#define COPROC_CONDITION_CODE_NAMES \
+ {"$cc0", RTYPE_FCC | RTYPE_CCC | 0}, \
+ {"$cc1", RTYPE_FCC | RTYPE_CCC | 1}, \
+ {"$cc2", RTYPE_FCC | RTYPE_CCC | 2}, \
+ {"$cc3", RTYPE_FCC | RTYPE_CCC | 3}, \
+ {"$cc4", RTYPE_FCC | RTYPE_CCC | 4}, \
+ {"$cc5", RTYPE_FCC | RTYPE_CCC | 5}, \
+ {"$cc6", RTYPE_FCC | RTYPE_CCC | 6}, \
+ {"$cc7", RTYPE_FCC | RTYPE_CCC | 7}
+
+#define N32N64_SYMBOLIC_REGISTER_NAMES \
+ {"$a4", RTYPE_GP | 8}, \
+ {"$a5", RTYPE_GP | 9}, \
+ {"$a6", RTYPE_GP | 10}, \
+ {"$a7", RTYPE_GP | 11}, \
+ {"$ta0", RTYPE_GP | 8}, /* alias for $a4 */ \
+ {"$ta1", RTYPE_GP | 9}, /* alias for $a5 */ \
+ {"$ta2", RTYPE_GP | 10}, /* alias for $a6 */ \
+ {"$ta3", RTYPE_GP | 11}, /* alias for $a7 */ \
+ {"$t0", RTYPE_GP | 12}, \
+ {"$t1", RTYPE_GP | 13}, \
+ {"$t2", RTYPE_GP | 14}, \
+ {"$t3", RTYPE_GP | 15}
+
+#define O32_SYMBOLIC_REGISTER_NAMES \
+ {"$t0", RTYPE_GP | 8}, \
+ {"$t1", RTYPE_GP | 9}, \
+ {"$t2", RTYPE_GP | 10}, \
+ {"$t3", RTYPE_GP | 11}, \
+ {"$t4", RTYPE_GP | 12}, \
+ {"$t5", RTYPE_GP | 13}, \
+ {"$t6", RTYPE_GP | 14}, \
+ {"$t7", RTYPE_GP | 15}, \
+ {"$ta0", RTYPE_GP | 12}, /* alias for $t4 */ \
+ {"$ta1", RTYPE_GP | 13}, /* alias for $t5 */ \
+ {"$ta2", RTYPE_GP | 14}, /* alias for $t6 */ \
+ {"$ta3", RTYPE_GP | 15} /* alias for $t7 */
+
+/* Remaining symbolic register names */
+#define SYMBOLIC_REGISTER_NAMES \
+ {"$zero", RTYPE_GP | 0}, \
+ {"$at", RTYPE_GP | 1}, \
+ {"$AT", RTYPE_GP | 1}, \
+ {"$v0", RTYPE_GP | 2}, \
+ {"$v1", RTYPE_GP | 3}, \
+ {"$a0", RTYPE_GP | 4}, \
+ {"$a1", RTYPE_GP | 5}, \
+ {"$a2", RTYPE_GP | 6}, \
+ {"$a3", RTYPE_GP | 7}, \
+ {"$s0", RTYPE_GP | 16}, \
+ {"$s1", RTYPE_GP | 17}, \
+ {"$s2", RTYPE_GP | 18}, \
+ {"$s3", RTYPE_GP | 19}, \
+ {"$s4", RTYPE_GP | 20}, \
+ {"$s5", RTYPE_GP | 21}, \
+ {"$s6", RTYPE_GP | 22}, \
+ {"$s7", RTYPE_GP | 23}, \
+ {"$t8", RTYPE_GP | 24}, \
+ {"$t9", RTYPE_GP | 25}, \
+ {"$k0", RTYPE_GP | 26}, \
+ {"$kt0", RTYPE_GP | 26}, \
+ {"$k1", RTYPE_GP | 27}, \
+ {"$kt1", RTYPE_GP | 27}, \
+ {"$gp", RTYPE_GP | 28}, \
+ {"$sp", RTYPE_GP | 29}, \
+ {"$s8", RTYPE_GP | 30}, \
+ {"$fp", RTYPE_GP | 30}, \
+ {"$ra", RTYPE_GP | 31}
+
+#define MIPS16_SPECIAL_REGISTER_NAMES \
+ {"$pc", RTYPE_PC | 0}
+
+#define MDMX_VECTOR_REGISTER_NAMES \
+ /* {"$v0", RTYPE_VEC | 0}, clash with REG 2 above */ \
+ /* {"$v1", RTYPE_VEC | 1}, clash with REG 3 above */ \
+ {"$v2", RTYPE_VEC | 2}, \
+ {"$v3", RTYPE_VEC | 3}, \
+ {"$v4", RTYPE_VEC | 4}, \
+ {"$v5", RTYPE_VEC | 5}, \
+ {"$v6", RTYPE_VEC | 6}, \
+ {"$v7", RTYPE_VEC | 7}, \
+ {"$v8", RTYPE_VEC | 8}, \
+ {"$v9", RTYPE_VEC | 9}, \
+ {"$v10", RTYPE_VEC | 10}, \
+ {"$v11", RTYPE_VEC | 11}, \
+ {"$v12", RTYPE_VEC | 12}, \
+ {"$v13", RTYPE_VEC | 13}, \
+ {"$v14", RTYPE_VEC | 14}, \
+ {"$v15", RTYPE_VEC | 15}, \
+ {"$v16", RTYPE_VEC | 16}, \
+ {"$v17", RTYPE_VEC | 17}, \
+ {"$v18", RTYPE_VEC | 18}, \
+ {"$v19", RTYPE_VEC | 19}, \
+ {"$v20", RTYPE_VEC | 20}, \
+ {"$v21", RTYPE_VEC | 21}, \
+ {"$v22", RTYPE_VEC | 22}, \
+ {"$v23", RTYPE_VEC | 23}, \
+ {"$v24", RTYPE_VEC | 24}, \
+ {"$v25", RTYPE_VEC | 25}, \
+ {"$v26", RTYPE_VEC | 26}, \
+ {"$v27", RTYPE_VEC | 27}, \
+ {"$v28", RTYPE_VEC | 28}, \
+ {"$v29", RTYPE_VEC | 29}, \
+ {"$v30", RTYPE_VEC | 30}, \
+ {"$v31", RTYPE_VEC | 31}
+
+#define MIPS_DSP_ACCUMULATOR_NAMES \
+ {"$ac0", RTYPE_ACC | 0}, \
+ {"$ac1", RTYPE_ACC | 1}, \
+ {"$ac2", RTYPE_ACC | 2}, \
+ {"$ac3", RTYPE_ACC | 3}
+
+static const struct regname reg_names[] = {
+ GENERIC_REGISTER_NUMBERS,
+ FPU_REGISTER_NAMES,
+ FPU_CONDITION_CODE_NAMES,
+ COPROC_CONDITION_CODE_NAMES,
+
+ /* The $txx registers depends on the abi,
+ these will be added later into the symbol table from
+ one of the tables below once mips_abi is set after
+ parsing of arguments from the command line. */
+ SYMBOLIC_REGISTER_NAMES,
+
+ MIPS16_SPECIAL_REGISTER_NAMES,
+ MDMX_VECTOR_REGISTER_NAMES,
+ MIPS_DSP_ACCUMULATOR_NAMES,
+ {0, 0}
+};
+
+static const struct regname reg_names_o32[] = {
+ O32_SYMBOLIC_REGISTER_NAMES,
+ {0, 0}
+};
+
+static const struct regname reg_names_n32n64[] = {
+ N32N64_SYMBOLIC_REGISTER_NAMES,
+ {0, 0}
+};
+
+static int
+reg_lookup (char **s, unsigned int types, unsigned int *regnop)
+{
+ symbolS *symbolP;
+ char *e;
+ char save_c;
+ int reg = -1;
+
+ /* Find end of name. */
+ e = *s;
+ if (is_name_beginner (*e))
+ ++e;
+ while (is_part_of_name (*e))
+ ++e;
+
+ /* Terminate name. */
+ save_c = *e;
+ *e = '\0';
+
+ /* Look for a register symbol. */
+ if ((symbolP = symbol_find (*s)) && S_GET_SEGMENT (symbolP) == reg_section)
+ {
+ int r = S_GET_VALUE (symbolP);
+ if (r & types)
+ reg = r & RNUM_MASK;
+ else if ((types & RTYPE_VEC) && (r & ~1) == (RTYPE_GP | 2))
+ /* Convert GP reg $v0/1 to MDMX reg $v0/1! */
+ reg = (r & RNUM_MASK) - 2;
+ }
+ /* Else see if this is a register defined in an itbl entry. */
+ else if ((types & RTYPE_GP) && itbl_have_entries)
+ {
+ char *n = *s;
+ unsigned long r;
+
+ if (*n == '$')
+ ++n;
+ if (itbl_get_reg_val (n, &r))
+ reg = r & RNUM_MASK;
+ }
+
+ /* Advance to next token if a register was recognised. */
+ if (reg >= 0)
+ *s = e;
+ else if (types & RWARN)
+ as_warn ("Unrecognized register name `%s'", *s);
+
+ *e = save_c;
+ if (regnop)
+ *regnop = reg;
+ return reg >= 0;
+}
+
+/* This function is called once, at assembler startup time. It should set up
+ all the tables, etc. that the MD part of the assembler will need. */
void
md_begin (void)
int i = 0;
int broken = 0;
+ if (mips_pic != NO_PIC)
+ {
+ if (g_switch_seen && g_switch_value != 0)
+ as_bad (_("-G may not be used in position-independent code"));
+ g_switch_value = 0;
+ }
+
if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_arch))
as_warn (_("Could not set architecture and machine"));
{
if (!validate_mips_insn (&mips_opcodes[i]))
broken = 1;
+ if (nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
+ {
+ create_insn (&nop_insn, mips_opcodes + i);
+ nop_insn.fixed_p = 1;
+ }
}
++i;
}
mips16_opcodes[i].name, mips16_opcodes[i].args);
broken = 1;
}
+ if (mips16_nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
+ {
+ create_insn (&mips16_nop_insn, mips16_opcodes + i);
+ mips16_nop_insn.fixed_p = 1;
+ }
++i;
}
while (i < bfd_mips16_num_opcodes
/* We add all the general register names to the symbol table. This
helps us detect invalid uses of them. */
- for (i = 0; i < 32; i++)
- {
- char buf[5];
-
- sprintf (buf, "$%d", i);
- symbol_table_insert (symbol_new (buf, reg_section, i,
+ for (i = 0; reg_names[i].name; i++)
+ symbol_table_insert (symbol_new (reg_names[i].name, reg_section,
+ reg_names[i].num, // & RNUM_MASK,
+ &zero_address_frag));
+ if (HAVE_NEWABI)
+ for (i = 0; reg_names_n32n64[i].name; i++)
+ symbol_table_insert (symbol_new (reg_names_n32n64[i].name, reg_section,
+ reg_names_n32n64[i].num, // & RNUM_MASK,
&zero_address_frag));
- }
- symbol_table_insert (symbol_new ("$ra", reg_section, RA,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$fp", reg_section, FP,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$sp", reg_section, SP,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$gp", reg_section, GP,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$at", reg_section, AT,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$kt0", reg_section, KT0,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$kt1", reg_section, KT1,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$zero", reg_section, ZERO,
- &zero_address_frag));
- symbol_table_insert (symbol_new ("$pc", reg_section, -1,
- &zero_address_frag));
-
- /* If we don't add these register names to the symbol table, they
- may end up being added as regular symbols by operand(), and then
- make it to the object file as undefined in case they're not
- regarded as local symbols. They're local in o32, since `$' is a
- local symbol prefix, but not in n32 or n64. */
- for (i = 0; i < 8; i++)
- {
- char buf[6];
-
- sprintf (buf, "$fcc%i", i);
- symbol_table_insert (symbol_new (buf, reg_section, -1,
+ else
+ for (i = 0; reg_names_o32[i].name; i++)
+ symbol_table_insert (symbol_new (reg_names_o32[i].name, reg_section,
+ reg_names_o32[i].num, // & RNUM_MASK,
&zero_address_frag));
- }
- mips_no_prev_insn (FALSE);
+ mips_no_prev_insn ();
mips_gprmask = 0;
mips_cprmask[0] = 0;
bfd_set_gp_size (stdoutput, g_switch_value);
+#ifdef OBJ_ELF
if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
{
- /* On a native system, sections must be aligned to 16 byte
- boundaries. When configured for an embedded ELF target, we
- don't bother. */
- if (strcmp (TARGET_OS, "elf") != 0)
+ /* On a native system other than VxWorks, sections must be aligned
+ to 16 byte boundaries. When configured for an embedded ELF
+ target, we don't bother. */
+ if (strcmp (TARGET_OS, "elf") != 0
+ && strcmp (TARGET_OS, "vxworks") != 0)
{
(void) bfd_set_section_alignment (stdoutput, text_section, 4);
(void) bfd_set_section_alignment (stdoutput, data_section, 4);
bfd_set_section_flags (stdoutput, sec, flags);
bfd_set_section_alignment (stdoutput, sec, HAVE_NEWABI ? 3 : 2);
-#ifdef OBJ_ELF
mips_regmask_frag = frag_more (sizeof (Elf32_External_RegInfo));
-#endif
}
else
{
bfd_set_section_flags (stdoutput, sec, flags);
bfd_set_section_alignment (stdoutput, sec, 3);
-#ifdef OBJ_ELF
/* Set up the option header. */
{
Elf_Internal_Options opthdr;
mips_regmask_frag = frag_more (sizeof (Elf64_External_RegInfo));
}
-#endif
}
if (ECOFF_DEBUGGING)
SEC_HAS_CONTENTS | SEC_READONLY);
(void) bfd_set_section_alignment (stdoutput, sec, 2);
}
-#ifdef OBJ_ELF
else if (OUTPUT_FLAVOR == bfd_target_elf_flavour && mips_flag_pdr)
{
pdr_seg = subseg_new (".pdr", (subsegT) 0);
| SEC_DEBUGGING);
(void) bfd_set_section_alignment (stdoutput, pdr_seg, 2);
}
-#endif
subseg_set (seg, subseg);
}
}
+#endif /* OBJ_ELF */
if (! ECOFF_DEBUGGING)
md_obj_begin ();
+
+ if (mips_fix_vr4120)
+ init_vr4120_conflicts ();
}
void
}
/* Return true if the given relocation might need a matching %lo().
- Note that R_MIPS_GOT16 relocations only need a matching %lo() when
- applied to local symbols. */
+ This is only "might" because SVR4 R_MIPS_GOT16 relocations only
+ need a matching %lo() when applied to local symbols. */
static inline bfd_boolean
reloc_needs_lo_p (bfd_reloc_code_real_type reloc)
{
return (HAVE_IN_PLACE_ADDENDS
&& (reloc == BFD_RELOC_HI16_S
- || reloc == BFD_RELOC_MIPS_GOT16
- || reloc == BFD_RELOC_MIPS16_HI16_S));
+ || reloc == BFD_RELOC_MIPS16_HI16_S
+ /* VxWorks R_MIPS_GOT16 relocs never need a matching %lo();
+ all GOT16 relocations evaluate to "G". */
+ || (reloc == BFD_RELOC_MIPS_GOT16 && mips_pic != VXWORKS_PIC)));
}
/* Return true if the given fixup is followed by a matching R_MIPS_LO16
of register. */
static int
-insn_uses_reg (struct mips_cl_insn *ip, unsigned int reg,
+insn_uses_reg (const struct mips_cl_insn *ip, unsigned int reg,
enum mips_regclass class)
{
if (class == MIPS16_REG)
because there is no instruction that sets both $f0 and $f1
and requires a delay. */
if ((ip->insn_mo->pinfo & INSN_READ_FPR_S)
- && ((((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS) &~(unsigned)1)
+ && ((EXTRACT_OPERAND (FS, *ip) & ~(unsigned) 1)
== (reg &~ (unsigned) 1)))
return 1;
if ((ip->insn_mo->pinfo & INSN_READ_FPR_T)
- && ((((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT) &~(unsigned)1)
+ && ((EXTRACT_OPERAND (FT, *ip) & ~(unsigned) 1)
== (reg &~ (unsigned) 1)))
return 1;
}
else if (! mips_opts.mips16)
{
if ((ip->insn_mo->pinfo & INSN_READ_GPR_S)
- && ((ip->insn_opcode >> OP_SH_RS) & OP_MASK_RS) == reg)
+ && EXTRACT_OPERAND (RS, *ip) == reg)
return 1;
if ((ip->insn_mo->pinfo & INSN_READ_GPR_T)
- && ((ip->insn_opcode >> OP_SH_RT) & OP_MASK_RT) == reg)
+ && EXTRACT_OPERAND (RT, *ip) == reg)
return 1;
}
else
{
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_X)
- && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_RX)
- & MIPS16OP_MASK_RX)]
- == reg))
+ && mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)] == reg)
return 1;
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Y)
- && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_RY)
- & MIPS16OP_MASK_RY)]
- == reg))
+ && mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)] == reg)
return 1;
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Z)
- && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_MOVE32Z)
- & MIPS16OP_MASK_MOVE32Z)]
+ && (mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (MOVE32Z, *ip)]
== reg))
return 1;
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_T) && reg == TREG)
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_31) && reg == RA)
return 1;
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_GPR_X)
- && ((ip->insn_opcode >> MIPS16OP_SH_REGR32)
- & MIPS16OP_MASK_REGR32) == reg)
+ && MIPS16_EXTRACT_OPERAND (REGR32, *ip) == reg)
return 1;
}
{
unsigned long prev_pinfo;
- prev_pinfo = prev_insn.insn_mo->pinfo;
+ prev_pinfo = history[0].insn_mo->pinfo;
if (! mips_opts.noreorder
&& (((prev_pinfo & INSN_LOAD_MEMORY_DELAY)
&& ! gpr_interlocks)
delay the use of general register rt for one instruction. */
/* Itbl support may require additional care here. */
know (prev_pinfo & INSN_WRITE_GPR_T);
- if (reg == ((prev_insn.insn_opcode >> OP_SH_RT) & OP_MASK_RT))
+ if (reg == EXTRACT_OPERAND (RT, history[0]))
return 1;
}
return 0;
}
+/* Move all labels in insn_labels to the current insertion point. */
+
+static void
+mips_move_labels (void)
+{
+ struct insn_label_list *l;
+ valueT val;
+
+ for (l = insn_labels; l != NULL; l = l->next)
+ {
+ assert (S_GET_SEGMENT (l->label) == now_seg);
+ symbol_set_frag (l->label, frag_now);
+ val = (valueT) frag_now_fix ();
+ /* mips16 text labels are stored as odd. */
+ if (mips_opts.mips16)
+ ++val;
+ S_SET_VALUE (l->label, val);
+ }
+}
+
/* Mark instruction labels in mips16 mode. This permits the linker to
handle them specially, such as generating jalx instructions when
needed. We also make them odd for the duration of the assembly, in
mips_relax.sequence = 0;
}
-/* Output an instruction. IP is the instruction information.
- ADDRESS_EXPR is an operand of the instruction to be used with
- RELOC_TYPE. */
+/* Classify an instruction according to the FIX_VR4120_* enumeration.
+ Return NUM_FIX_VR4120_CLASSES if the instruction isn't affected
+ by VR4120 errata. */
+
+static unsigned int
+classify_vr4120_insn (const char *name)
+{
+ if (strncmp (name, "macc", 4) == 0)
+ return FIX_VR4120_MACC;
+ if (strncmp (name, "dmacc", 5) == 0)
+ return FIX_VR4120_DMACC;
+ if (strncmp (name, "mult", 4) == 0)
+ return FIX_VR4120_MULT;
+ if (strncmp (name, "dmult", 5) == 0)
+ return FIX_VR4120_DMULT;
+ if (strstr (name, "div"))
+ return FIX_VR4120_DIV;
+ if (strcmp (name, "mtlo") == 0 || strcmp (name, "mthi") == 0)
+ return FIX_VR4120_MTHILO;
+ return NUM_FIX_VR4120_CLASSES;
+}
-static void
-append_insn (struct mips_cl_insn *ip, expressionS *address_expr,
- bfd_reloc_code_real_type *reloc_type)
+/* Return the number of instructions that must separate INSN1 and INSN2,
+ where INSN1 is the earlier instruction. Return the worst-case value
+ for any INSN2 if INSN2 is null. */
+
+static unsigned int
+insns_between (const struct mips_cl_insn *insn1,
+ const struct mips_cl_insn *insn2)
{
- register unsigned long prev_pinfo, pinfo;
- char *f;
- fixS *fixp[3];
- int nops = 0;
- relax_stateT prev_insn_frag_type = 0;
- bfd_boolean relaxed_branch = FALSE;
- bfd_boolean force_new_frag = FALSE;
+ unsigned long pinfo1, pinfo2;
- /* Mark instruction labels in mips16 mode. */
- mips16_mark_labels ();
+ /* This function needs to know which pinfo flags are set for INSN2
+ and which registers INSN2 uses. The former is stored in PINFO2 and
+ the latter is tested via INSN2_USES_REG. If INSN2 is null, PINFO2
+ will have every flag set and INSN2_USES_REG will always return true. */
+ pinfo1 = insn1->insn_mo->pinfo;
+ pinfo2 = insn2 ? insn2->insn_mo->pinfo : ~0U;
- prev_pinfo = prev_insn.insn_mo->pinfo;
- pinfo = ip->insn_mo->pinfo;
+#define INSN2_USES_REG(REG, CLASS) \
+ (insn2 == NULL || insn_uses_reg (insn2, REG, CLASS))
- if (mips_relax.sequence != 2
- && (!mips_opts.noreorder || prev_nop_frag != NULL))
+ /* For most targets, write-after-read dependencies on the HI and LO
+ registers must be separated by at least two instructions. */
+ if (!hilo_interlocks)
{
- int prev_prev_nop;
+ if ((pinfo1 & INSN_READ_LO) && (pinfo2 & INSN_WRITE_LO))
+ return 2;
+ if ((pinfo1 & INSN_READ_HI) && (pinfo2 & INSN_WRITE_HI))
+ return 2;
+ }
- /* If the previous insn required any delay slots, see if we need
- to insert a NOP or two. There are eight kinds of possible
- hazards, of which an instruction can have at most one type.
- (1) a load from memory delay
- (2) a load from a coprocessor delay
- (3) an unconditional branch delay
- (4) a conditional branch delay
- (5) a move to coprocessor register delay
- (6) a load coprocessor register from memory delay
- (7) a coprocessor condition code delay
- (8) a HI/LO special register delay
+ /* If we're working around r7000 errata, there must be two instructions
+ between an mfhi or mflo and any instruction that uses the result. */
+ if (mips_7000_hilo_fix
+ && MF_HILO_INSN (pinfo1)
+ && INSN2_USES_REG (EXTRACT_OPERAND (RD, *insn1), MIPS_GR_REG))
+ return 2;
- There are a lot of optimizations we could do that we don't.
- In particular, we do not, in general, reorder instructions.
- If you use gcc with optimization, it will reorder
- instructions and generally do much more optimization then we
- do here; repeating all that work in the assembler would only
- benefit hand written assembly code, and does not seem worth
- it. */
+ /* If working around VR4120 errata, check for combinations that need
+ a single intervening instruction. */
+ if (mips_fix_vr4120)
+ {
+ unsigned int class1, class2;
- /* This is how a NOP is emitted. */
-#define emit_nop() \
- (mips_opts.mips16 \
- ? md_number_to_chars (frag_more (2), 0x6500, 2) \
- : md_number_to_chars (frag_more (4), 0, 4))
-
- /* The previous insn might require a delay slot, depending upon
- the contents of the current insn. */
- if (! mips_opts.mips16
- && (((prev_pinfo & INSN_LOAD_MEMORY_DELAY)
- && ! gpr_interlocks)
- || ((prev_pinfo & INSN_LOAD_COPROC_DELAY)
- && ! cop_interlocks)))
- {
- /* A load from a coprocessor or from memory. All load
- delays delay the use of general register rt for one
- instruction. */
- /* Itbl support may require additional care here. */
- know (prev_pinfo & INSN_WRITE_GPR_T);
- if (mips_optimize == 0
- || insn_uses_reg (ip,
- ((prev_insn.insn_opcode >> OP_SH_RT)
- & OP_MASK_RT),
- MIPS_GR_REG))
- ++nops;
- }
- else if (! mips_opts.mips16
- && (((prev_pinfo & INSN_COPROC_MOVE_DELAY)
- && ! cop_interlocks)
- || ((prev_pinfo & INSN_COPROC_MEMORY_DELAY)
- && ! cop_mem_interlocks)))
- {
- /* A generic coprocessor delay. The previous instruction
- modified a coprocessor general or control register. If
- it modified a control register, we need to avoid any
- coprocessor instruction (this is probably not always
- required, but it sometimes is). If it modified a general
- register, we avoid using that register.
-
- This case is not handled very well. There is no special
- knowledge of CP0 handling, and the coprocessors other
- than the floating point unit are not distinguished at
- all. */
- /* Itbl support may require additional care here. FIXME!
- Need to modify this to include knowledge about
- user specified delays! */
- if (prev_pinfo & INSN_WRITE_FPR_T)
- {
- if (mips_optimize == 0
- || insn_uses_reg (ip,
- ((prev_insn.insn_opcode >> OP_SH_FT)
- & OP_MASK_FT),
- MIPS_FP_REG))
- ++nops;
- }
- else if (prev_pinfo & INSN_WRITE_FPR_S)
- {
- if (mips_optimize == 0
- || insn_uses_reg (ip,
- ((prev_insn.insn_opcode >> OP_SH_FS)
- & OP_MASK_FS),
- MIPS_FP_REG))
- ++nops;
- }
- else
- {
- /* We don't know exactly what the previous instruction
- does. If the current instruction uses a coprocessor
- register, we must insert a NOP. If previous
- instruction may set the condition codes, and the
- current instruction uses them, we must insert two
- NOPS. */
- /* Itbl support may require additional care here. */
- if (mips_optimize == 0
- || ((prev_pinfo & INSN_WRITE_COND_CODE)
- && (pinfo & INSN_READ_COND_CODE)))
- nops += 2;
- else if (pinfo & INSN_COP)
- ++nops;
- }
- }
- else if (! mips_opts.mips16
- && (prev_pinfo & INSN_WRITE_COND_CODE)
- && ! cop_interlocks)
+ class1 = classify_vr4120_insn (insn1->insn_mo->name);
+ if (class1 != NUM_FIX_VR4120_CLASSES && vr4120_conflicts[class1] != 0)
{
- /* The previous instruction sets the coprocessor condition
- codes, but does not require a general coprocessor delay
- (this means it is a floating point comparison
- instruction). If this instruction uses the condition
- codes, we need to insert a single NOP. */
- /* Itbl support may require additional care here. */
- if (mips_optimize == 0
- || (pinfo & INSN_READ_COND_CODE))
- ++nops;
- }
-
- /* If we're fixing up mfhi/mflo for the r7000 and the
- previous insn was an mfhi/mflo and the current insn
- reads the register that the mfhi/mflo wrote to, then
- insert two nops. */
-
- else if (mips_7000_hilo_fix
- && MF_HILO_INSN (prev_pinfo)
- && insn_uses_reg (ip, ((prev_insn.insn_opcode >> OP_SH_RD)
- & OP_MASK_RD),
- MIPS_GR_REG))
- {
- nops += 2;
- }
-
- /* If we're fixing up mfhi/mflo for the r7000 and the
- 2nd previous insn was an mfhi/mflo and the current insn
- reads the register that the mfhi/mflo wrote to, then
- insert one nop. */
-
- else if (mips_7000_hilo_fix
- && MF_HILO_INSN (prev_prev_insn.insn_opcode)
- && insn_uses_reg (ip, ((prev_prev_insn.insn_opcode >> OP_SH_RD)
- & OP_MASK_RD),
- MIPS_GR_REG))
-
- {
- ++nops;
- }
-
- else if (prev_pinfo & INSN_READ_LO)
- {
- /* The previous instruction reads the LO register; if the
- current instruction writes to the LO register, we must
- insert two NOPS. Some newer processors have interlocks.
- Also the tx39's multiply instructions can be executed
- immediately after a read from HI/LO (without the delay),
- though the tx39's divide insns still do require the
- delay. */
- if (! (hilo_interlocks
- || (mips_opts.arch == CPU_R3900 && (pinfo & INSN_MULT)))
- && (mips_optimize == 0
- || (pinfo & INSN_WRITE_LO)))
- nops += 2;
- /* Most mips16 branch insns don't have a delay slot.
- If a read from LO is immediately followed by a branch
- to a write to LO we have a read followed by a write
- less than 2 insns away. We assume the target of
- a branch might be a write to LO, and insert a nop
- between a read and an immediately following branch. */
- else if (mips_opts.mips16
- && (mips_optimize == 0
- || (pinfo & MIPS16_INSN_BRANCH)))
- ++nops;
- }
- else if (prev_insn.insn_mo->pinfo & INSN_READ_HI)
- {
- /* The previous instruction reads the HI register; if the
- current instruction writes to the HI register, we must
- insert a NOP. Some newer processors have interlocks.
- Also the note tx39's multiply above. */
- if (! (hilo_interlocks
- || (mips_opts.arch == CPU_R3900 && (pinfo & INSN_MULT)))
- && (mips_optimize == 0
- || (pinfo & INSN_WRITE_HI)))
- nops += 2;
- /* Most mips16 branch insns don't have a delay slot.
- If a read from HI is immediately followed by a branch
- to a write to HI we have a read followed by a write
- less than 2 insns away. We assume the target of
- a branch might be a write to HI, and insert a nop
- between a read and an immediately following branch. */
- else if (mips_opts.mips16
- && (mips_optimize == 0
- || (pinfo & MIPS16_INSN_BRANCH)))
- ++nops;
- }
-
- /* If the previous instruction was in a noreorder section, then
- we don't want to insert the nop after all. */
- /* Itbl support may require additional care here. */
- if (prev_insn_unreordered)
- nops = 0;
-
- /* There are two cases which require two intervening
- instructions: 1) setting the condition codes using a move to
- coprocessor instruction which requires a general coprocessor
- delay and then reading the condition codes 2) reading the HI
- or LO register and then writing to it (except on processors
- which have interlocks). If we are not already emitting a NOP
- instruction, we must check for these cases compared to the
- instruction previous to the previous instruction. */
- if ((! mips_opts.mips16
- && (prev_prev_insn.insn_mo->pinfo & INSN_COPROC_MOVE_DELAY)
- && (prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
- && (pinfo & INSN_READ_COND_CODE)
- && ! cop_interlocks)
- || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_LO)
- && (pinfo & INSN_WRITE_LO)
- && ! (hilo_interlocks
- || (mips_opts.arch == CPU_R3900 && (pinfo & INSN_MULT))))
- || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
- && (pinfo & INSN_WRITE_HI)
- && ! (hilo_interlocks
- || (mips_opts.arch == CPU_R3900 && (pinfo & INSN_MULT)))))
- prev_prev_nop = 1;
- else
- prev_prev_nop = 0;
+ if (insn2 == NULL)
+ return 1;
+ class2 = classify_vr4120_insn (insn2->insn_mo->name);
+ if (vr4120_conflicts[class1] & (1 << class2))
+ return 1;
+ }
+ }
- if (prev_prev_insn_unreordered)
- prev_prev_nop = 0;
+ if (!mips_opts.mips16)
+ {
+ /* Check for GPR or coprocessor load delays. All such delays
+ are on the RT register. */
+ /* Itbl support may require additional care here. */
+ if ((!gpr_interlocks && (pinfo1 & INSN_LOAD_MEMORY_DELAY))
+ || (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC_DELAY)))
+ {
+ know (pinfo1 & INSN_WRITE_GPR_T);
+ if (INSN2_USES_REG (EXTRACT_OPERAND (RT, *insn1), MIPS_GR_REG))
+ return 1;
+ }
- if (prev_prev_nop && nops == 0)
- ++nops;
+ /* Check for generic coprocessor hazards.
- if (mips_fix_vr4120 && prev_insn.insn_mo->name)
+ This case is not handled very well. There is no special
+ knowledge of CP0 handling, and the coprocessors other than
+ the floating point unit are not distinguished at all. */
+ /* Itbl support may require additional care here. FIXME!
+ Need to modify this to include knowledge about
+ user specified delays! */
+ else if ((!cop_interlocks && (pinfo1 & INSN_COPROC_MOVE_DELAY))
+ || (!cop_mem_interlocks && (pinfo1 & INSN_COPROC_MEMORY_DELAY)))
{
- /* We're out of bits in pinfo, so we must resort to string
- ops here. Shortcuts are selected based on opcodes being
- limited to the VR4120 instruction set. */
- int min_nops = 0;
- const char *pn = prev_insn.insn_mo->name;
- const char *tn = ip->insn_mo->name;
- if (strncmp (pn, "macc", 4) == 0
- || strncmp (pn, "dmacc", 5) == 0)
+ /* Handle cases where INSN1 writes to a known general coprocessor
+ register. There must be a one instruction delay before INSN2
+ if INSN2 reads that register, otherwise no delay is needed. */
+ if (pinfo1 & INSN_WRITE_FPR_T)
{
- /* Errata 21 - [D]DIV[U] after [D]MACC */
- if (strstr (tn, "div"))
- min_nops = 1;
-
- /* VR4181A errata MD(1): "If a MULT, MULTU, DMULT or DMULTU
- instruction is executed immediately after a MACC or
- DMACC instruction, the result of [either instruction]
- is incorrect." */
- if (strncmp (tn, "mult", 4) == 0
- || strncmp (tn, "dmult", 5) == 0)
- min_nops = 1;
-
- /* Errata 23 - Continuous DMULT[U]/DMACC instructions.
- Applies on top of VR4181A MD(1) errata. */
- if (pn[0] == 'd' && strncmp (tn, "dmacc", 5) == 0)
- min_nops = 1;
-
- /* Errata 24 - MT{LO,HI} after [D]MACC */
- if (strcmp (tn, "mtlo") == 0
- || strcmp (tn, "mthi") == 0)
- min_nops = 1;
+ if (INSN2_USES_REG (EXTRACT_OPERAND (FT, *insn1), MIPS_FP_REG))
+ return 1;
}
- else if (strncmp (pn, "dmult", 5) == 0
- && (strncmp (tn, "dmult", 5) == 0
- || strncmp (tn, "dmacc", 5) == 0))
+ else if (pinfo1 & INSN_WRITE_FPR_S)
{
- /* Here is the rest of errata 23. */
- min_nops = 1;
+ if (INSN2_USES_REG (EXTRACT_OPERAND (FS, *insn1), MIPS_FP_REG))
+ return 1;
}
- else if ((strncmp (pn, "dmult", 5) == 0 || strstr (pn, "div"))
- && (strncmp (tn, "macc", 4) == 0
- || strncmp (tn, "dmacc", 5) == 0))
+ else
{
- /* VR4181A errata MD(4): "If a MACC or DMACC instruction is
- executed immediately after a DMULT, DMULTU, DIV, DIVU,
- DDIV or DDIVU instruction, the result of the MACC or
- DMACC instruction is incorrect.". This partly overlaps
- the workaround for errata 23. */
- min_nops = 1;
+ /* Read-after-write dependencies on the control registers
+ require a two-instruction gap. */
+ if ((pinfo1 & INSN_WRITE_COND_CODE)
+ && (pinfo2 & INSN_READ_COND_CODE))
+ return 2;
+
+ /* We don't know exactly what INSN1 does. If INSN2 is
+ also a coprocessor instruction, assume there must be
+ a one instruction gap. */
+ if (pinfo2 & INSN_COP)
+ return 1;
}
- if (nops < min_nops)
- nops = min_nops;
}
- /* If we are being given a nop instruction, don't bother with
- one of the nops we would otherwise output. This will only
- happen when a nop instruction is used with mips_optimize set
- to 0. */
- if (nops > 0
- && ! mips_opts.noreorder
- && ip->insn_opcode == (unsigned) (mips_opts.mips16 ? 0x6500 : 0))
- --nops;
+ /* Check for read-after-write dependencies on the coprocessor
+ control registers in cases where INSN1 does not need a general
+ coprocessor delay. This means that INSN1 is a floating point
+ comparison instruction. */
+ /* Itbl support may require additional care here. */
+ else if (!cop_interlocks
+ && (pinfo1 & INSN_WRITE_COND_CODE)
+ && (pinfo2 & INSN_READ_COND_CODE))
+ return 1;
+ }
- /* Now emit the right number of NOP instructions. */
- if (nops > 0 && ! mips_opts.noreorder)
- {
- fragS *old_frag;
- unsigned long old_frag_offset;
- int i;
- struct insn_label_list *l;
+#undef INSN2_USES_REG
- old_frag = frag_now;
- old_frag_offset = frag_now_fix ();
+ return 0;
+}
- for (i = 0; i < nops; i++)
- emit_nop ();
+/* Return the number of nops that would be needed to work around the
+ VR4130 mflo/mfhi errata if instruction INSN immediately followed
+ the MAX_VR4130_NOPS instructions described by HISTORY. */
- if (listing)
- {
- listing_prev_line ();
- /* We may be at the start of a variant frag. In case we
- are, make sure there is enough space for the frag
- after the frags created by listing_prev_line. The
- argument to frag_grow here must be at least as large
- as the argument to all other calls to frag_grow in
- this file. We don't have to worry about being in the
- middle of a variant frag, because the variants insert
- all needed nop instructions themselves. */
- frag_grow (40);
- }
+static int
+nops_for_vr4130 (const struct mips_cl_insn *history,
+ const struct mips_cl_insn *insn)
+{
+ int i, j, reg;
- for (l = insn_labels; l != NULL; l = l->next)
- {
- valueT val;
+ /* Check if the instruction writes to HI or LO. MTHI and MTLO
+ are not affected by the errata. */
+ if (insn != 0
+ && ((insn->insn_mo->pinfo & (INSN_WRITE_HI | INSN_WRITE_LO)) == 0
+ || strcmp (insn->insn_mo->name, "mtlo") == 0
+ || strcmp (insn->insn_mo->name, "mthi") == 0))
+ return 0;
- assert (S_GET_SEGMENT (l->label) == now_seg);
- symbol_set_frag (l->label, frag_now);
- val = (valueT) frag_now_fix ();
- /* mips16 text labels are stored as odd. */
- if (mips_opts.mips16)
- ++val;
- S_SET_VALUE (l->label, val);
- }
+ /* Search for the first MFLO or MFHI. */
+ for (i = 0; i < MAX_VR4130_NOPS; i++)
+ if (!history[i].noreorder_p && MF_HILO_INSN (history[i].insn_mo->pinfo))
+ {
+ /* Extract the destination register. */
+ if (mips_opts.mips16)
+ reg = mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, history[i])];
+ else
+ reg = EXTRACT_OPERAND (RD, history[i]);
-#ifndef NO_ECOFF_DEBUGGING
- if (ECOFF_DEBUGGING)
- ecoff_fix_loc (old_frag, old_frag_offset);
-#endif
- }
- else if (prev_nop_frag != NULL)
- {
- /* We have a frag holding nops we may be able to remove. If
- we don't need any nops, we can decrease the size of
- prev_nop_frag by the size of one instruction. If we do
- need some nops, we count them in prev_nops_required. */
- if (prev_nop_frag_since == 0)
- {
- if (nops == 0)
- {
- prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
- --prev_nop_frag_holds;
- }
- else
- prev_nop_frag_required += nops;
- }
- else
- {
- if (prev_prev_nop == 0)
- {
- prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
- --prev_nop_frag_holds;
- }
- else
- ++prev_nop_frag_required;
- }
+ /* No nops are needed if INSN reads that register. */
+ if (insn != NULL && insn_uses_reg (insn, reg, MIPS_GR_REG))
+ return 0;
- if (prev_nop_frag_holds <= prev_nop_frag_required)
- prev_nop_frag = NULL;
+ /* ...or if any of the intervening instructions do. */
+ for (j = 0; j < i; j++)
+ if (insn_uses_reg (&history[j], reg, MIPS_GR_REG))
+ return 0;
- ++prev_nop_frag_since;
+ return MAX_VR4130_NOPS - i;
+ }
+ return 0;
+}
- /* Sanity check: by the time we reach the second instruction
- after prev_nop_frag, we should have used up all the nops
- one way or another. */
- assert (prev_nop_frag_since <= 1 || prev_nop_frag == NULL);
- }
+/* Return the number of nops that would be needed if instruction INSN
+ immediately followed the MAX_NOPS instructions given by HISTORY,
+ where HISTORY[0] is the most recent instruction. If INSN is null,
+ return the worse-case number of nops for any instruction. */
+
+static int
+nops_for_insn (const struct mips_cl_insn *history,
+ const struct mips_cl_insn *insn)
+{
+ int i, nops, tmp_nops;
+
+ nops = 0;
+ for (i = 0; i < MAX_DELAY_NOPS; i++)
+ if (!history[i].noreorder_p)
+ {
+ tmp_nops = insns_between (history + i, insn) - i;
+ if (tmp_nops > nops)
+ nops = tmp_nops;
+ }
+
+ if (mips_fix_vr4130)
+ {
+ tmp_nops = nops_for_vr4130 (history, insn);
+ if (tmp_nops > nops)
+ nops = tmp_nops;
+ }
+
+ return nops;
+}
+
+/* The variable arguments provide NUM_INSNS extra instructions that
+ might be added to HISTORY. Return the largest number of nops that
+ would be needed after the extended sequence. */
+
+static int
+nops_for_sequence (int num_insns, const struct mips_cl_insn *history, ...)
+{
+ va_list args;
+ struct mips_cl_insn buffer[MAX_NOPS];
+ struct mips_cl_insn *cursor;
+ int nops;
+
+ va_start (args, history);
+ cursor = buffer + num_insns;
+ memcpy (cursor, history, (MAX_NOPS - num_insns) * sizeof (*cursor));
+ while (cursor > buffer)
+ *--cursor = *va_arg (args, const struct mips_cl_insn *);
+
+ nops = nops_for_insn (buffer, NULL);
+ va_end (args);
+ return nops;
+}
+
+/* Like nops_for_insn, but if INSN is a branch, take into account the
+ worst-case delay for the branch target. */
+
+static int
+nops_for_insn_or_target (const struct mips_cl_insn *history,
+ const struct mips_cl_insn *insn)
+{
+ int nops, tmp_nops;
+
+ nops = nops_for_insn (history, insn);
+ if (insn->insn_mo->pinfo & (INSN_UNCOND_BRANCH_DELAY
+ | INSN_COND_BRANCH_DELAY
+ | INSN_COND_BRANCH_LIKELY))
+ {
+ tmp_nops = nops_for_sequence (2, history, insn, NOP_INSN);
+ if (tmp_nops > nops)
+ nops = tmp_nops;
+ }
+ else if (mips_opts.mips16 && (insn->insn_mo->pinfo & MIPS16_INSN_BRANCH))
+ {
+ tmp_nops = nops_for_sequence (1, history, insn);
+ if (tmp_nops > nops)
+ nops = tmp_nops;
+ }
+ return nops;
+}
+
+/* Output an instruction. IP is the instruction information.
+ ADDRESS_EXPR is an operand of the instruction to be used with
+ RELOC_TYPE. */
+
+static void
+append_insn (struct mips_cl_insn *ip, expressionS *address_expr,
+ bfd_reloc_code_real_type *reloc_type)
+{
+ register unsigned long prev_pinfo, pinfo;
+ relax_stateT prev_insn_frag_type = 0;
+ bfd_boolean relaxed_branch = FALSE;
+
+ /* Mark instruction labels in mips16 mode. */
+ mips16_mark_labels ();
+
+ prev_pinfo = history[0].insn_mo->pinfo;
+ pinfo = ip->insn_mo->pinfo;
+
+ if (mips_relax.sequence != 2 && !mips_opts.noreorder)
+ {
+ /* There are a lot of optimizations we could do that we don't.
+ In particular, we do not, in general, reorder instructions.
+ If you use gcc with optimization, it will reorder
+ instructions and generally do much more optimization then we
+ do here; repeating all that work in the assembler would only
+ benefit hand written assembly code, and does not seem worth
+ it. */
+ int nops = (mips_optimize == 0
+ ? nops_for_insn (history, NULL)
+ : nops_for_insn_or_target (history, ip));
+ if (nops > 0)
+ {
+ fragS *old_frag;
+ unsigned long old_frag_offset;
+ int i;
+
+ old_frag = frag_now;
+ old_frag_offset = frag_now_fix ();
+
+ for (i = 0; i < nops; i++)
+ emit_nop ();
+
+ if (listing)
+ {
+ listing_prev_line ();
+ /* We may be at the start of a variant frag. In case we
+ are, make sure there is enough space for the frag
+ after the frags created by listing_prev_line. The
+ argument to frag_grow here must be at least as large
+ as the argument to all other calls to frag_grow in
+ this file. We don't have to worry about being in the
+ middle of a variant frag, because the variants insert
+ all needed nop instructions themselves. */
+ frag_grow (40);
+ }
+
+ mips_move_labels ();
+
+#ifndef NO_ECOFF_DEBUGGING
+ if (ECOFF_DEBUGGING)
+ ecoff_fix_loc (old_frag, old_frag_offset);
+#endif
+ }
+ }
+ else if (mips_relax.sequence != 2 && prev_nop_frag != NULL)
+ {
+ /* Work out how many nops in prev_nop_frag are needed by IP. */
+ int nops = nops_for_insn_or_target (history, ip);
+ assert (nops <= prev_nop_frag_holds);
+
+ /* Enforce NOPS as a minimum. */
+ if (nops > prev_nop_frag_required)
+ prev_nop_frag_required = nops;
+
+ if (prev_nop_frag_holds == prev_nop_frag_required)
+ {
+ /* Settle for the current number of nops. Update the history
+ accordingly (for the benefit of any future .set reorder code). */
+ prev_nop_frag = NULL;
+ insert_into_history (prev_nop_frag_since,
+ prev_nop_frag_holds, NOP_INSN);
+ }
+ else
+ {
+ /* Allow this instruction to replace one of the nops that was
+ tentatively added to prev_nop_frag. */
+ prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
+ prev_nop_frag_holds--;
+ prev_nop_frag_since++;
+ }
}
#ifdef OBJ_ELF
#endif
/* Record the frag type before frag_var. */
- if (prev_insn_frag)
- prev_insn_frag_type = prev_insn_frag->fr_type;
+ if (history[0].frag)
+ prev_insn_frag_type = history[0].frag->fr_type;
if (address_expr
&& *reloc_type == BFD_RELOC_16_PCREL_S2
&& !mips_opts.mips16)
{
relaxed_branch = TRUE;
- f = frag_var (rs_machine_dependent,
- relaxed_branch_length
- (NULL, NULL,
- (pinfo & INSN_UNCOND_BRANCH_DELAY) ? -1
- : (pinfo & INSN_COND_BRANCH_LIKELY) ? 1 : 0), 4,
- RELAX_BRANCH_ENCODE
- (pinfo & INSN_UNCOND_BRANCH_DELAY,
- pinfo & INSN_COND_BRANCH_LIKELY,
- pinfo & INSN_WRITE_GPR_31,
- 0),
- address_expr->X_add_symbol,
- address_expr->X_add_number,
- 0);
+ add_relaxed_insn (ip, (relaxed_branch_length
+ (NULL, NULL,
+ (pinfo & INSN_UNCOND_BRANCH_DELAY) ? -1
+ : (pinfo & INSN_COND_BRANCH_LIKELY) ? 1
+ : 0)), 4,
+ RELAX_BRANCH_ENCODE
+ (pinfo & INSN_UNCOND_BRANCH_DELAY,
+ pinfo & INSN_COND_BRANCH_LIKELY,
+ pinfo & INSN_WRITE_GPR_31,
+ 0),
+ address_expr->X_add_symbol,
+ address_expr->X_add_number);
*reloc_type = BFD_RELOC_UNUSED;
}
else if (*reloc_type > BFD_RELOC_UNUSED)
{
/* We need to set up a variant frag. */
assert (mips_opts.mips16 && address_expr != NULL);
- f = frag_var (rs_machine_dependent, 4, 0,
- RELAX_MIPS16_ENCODE (*reloc_type - BFD_RELOC_UNUSED,
- mips16_small, mips16_ext,
- (prev_pinfo
- & INSN_UNCOND_BRANCH_DELAY),
- (*prev_insn_reloc_type
- == BFD_RELOC_MIPS16_JMP)),
- make_expr_symbol (address_expr), 0, NULL);
+ add_relaxed_insn (ip, 4, 0,
+ RELAX_MIPS16_ENCODE
+ (*reloc_type - BFD_RELOC_UNUSED,
+ mips16_small, mips16_ext,
+ prev_pinfo & INSN_UNCOND_BRANCH_DELAY,
+ history[0].mips16_absolute_jump_p),
+ make_expr_symbol (address_expr), 0);
}
else if (mips_opts.mips16
&& ! ip->use_extend
&& *reloc_type != BFD_RELOC_MIPS16_JMP)
{
- /* Make sure there is enough room to swap this instruction with
- a following jump instruction. */
- frag_grow (6);
- f = frag_more (2);
+ if ((pinfo & INSN_UNCOND_BRANCH_DELAY) == 0)
+ /* Make sure there is enough room to swap this instruction with
+ a following jump instruction. */
+ frag_grow (6);
+ add_fixed_insn (ip);
}
else
{
if (mips_relax.sequence != 1)
mips_macro_warning.sizes[1] += 4;
- f = frag_more (4);
+ if (mips_opts.mips16)
+ {
+ ip->fixed_p = 1;
+ ip->mips16_absolute_jump_p = (*reloc_type == BFD_RELOC_MIPS16_JMP);
+ }
+ add_fixed_insn (ip);
}
- fixp[0] = fixp[1] = fixp[2] = NULL;
if (address_expr != NULL && *reloc_type <= BFD_RELOC_UNUSED)
{
if (address_expr->X_op == O_constant)
if ((address_expr->X_add_number & 3) != 0)
as_bad (_("jump to misaligned address (0x%lx)"),
(unsigned long) address_expr->X_add_number);
- if (address_expr->X_add_number & ~0xfffffff)
- as_bad (_("jump address range overflow (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
ip->insn_opcode |= (address_expr->X_add_number >> 2) & 0x3ffffff;
break;
if ((address_expr->X_add_number & 3) != 0)
as_bad (_("jump to misaligned address (0x%lx)"),
(unsigned long) address_expr->X_add_number);
- if (address_expr->X_add_number & ~0xfffffff)
- as_bad (_("jump address range overflow (0x%lx)"),
- (unsigned long) address_expr->X_add_number);
ip->insn_opcode |=
(((address_expr->X_add_number & 0x7c0000) << 3)
| ((address_expr->X_add_number & 0xf800000) >> 7)
break;
case BFD_RELOC_16_PCREL_S2:
- goto need_reloc;
+ if ((address_expr->X_add_number & 3) != 0)
+ as_bad (_("branch to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ if (mips_relax_branch)
+ goto need_reloc;
+ if ((address_expr->X_add_number + 0x20000) & ~0x3ffff)
+ as_bad (_("branch address range overflow (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= (address_expr->X_add_number >> 2) & 0xffff;
+ break;
default:
internalError ();
break;
howto = bfd_reloc_type_lookup (stdoutput, reloc_type[i - 1]);
- fixp[0] = fix_new_exp (frag_now, f - frag_now->fr_literal,
- bfd_get_reloc_size(howto),
- address_expr,
- reloc_type[0] == BFD_RELOC_16_PCREL_S2,
- reloc_type[0]);
+ ip->fixp[0] = fix_new_exp (ip->frag, ip->where,
+ bfd_get_reloc_size (howto),
+ address_expr,
+ reloc_type[0] == BFD_RELOC_16_PCREL_S2,
+ reloc_type[0]);
/* These relocations can have an addend that won't fit in
4 octets for 64bit assembly. */
|| reloc_type[0] == BFD_RELOC_MIPS16_GPREL
|| reloc_type[0] == BFD_RELOC_MIPS16_HI16_S
|| reloc_type[0] == BFD_RELOC_MIPS16_LO16))
- fixp[0]->fx_no_overflow = 1;
+ ip->fixp[0]->fx_no_overflow = 1;
if (mips_relax.sequence)
{
if (mips_relax.first_fixup == 0)
- mips_relax.first_fixup = fixp[0];
+ mips_relax.first_fixup = ip->fixp[0];
}
else if (reloc_needs_lo_p (*reloc_type))
{
hi_fixup->next = mips_hi_fixup_list;
mips_hi_fixup_list = hi_fixup;
}
- hi_fixup->fixp = fixp[0];
+ hi_fixup->fixp = ip->fixp[0];
hi_fixup->seg = now_seg;
}
for (i = 1; i < 3; i++)
if (reloc_type[i] != BFD_RELOC_UNUSED)
{
- fixp[i] = fix_new (frag_now, fixp[0]->fx_where,
- fixp[0]->fx_size, NULL, 0,
- FALSE, reloc_type[i]);
+ ip->fixp[i] = fix_new (ip->frag, ip->where,
+ ip->fixp[0]->fx_size, NULL, 0,
+ FALSE, reloc_type[i]);
/* Use fx_tcbit to mark compound relocs. */
- fixp[0]->fx_tcbit = 1;
- fixp[i]->fx_tcbit = 1;
+ ip->fixp[0]->fx_tcbit = 1;
+ ip->fixp[i]->fx_tcbit = 1;
}
}
}
-
- if (! mips_opts.mips16)
- md_number_to_chars (f, ip->insn_opcode, 4);
- else if (*reloc_type == BFD_RELOC_MIPS16_JMP)
- {
- md_number_to_chars (f, ip->insn_opcode >> 16, 2);
- md_number_to_chars (f + 2, ip->insn_opcode & 0xffff, 2);
- }
- else
- {
- if (ip->use_extend)
- {
- md_number_to_chars (f, 0xf000 | ip->extend, 2);
- f += 2;
- }
- md_number_to_chars (f, ip->insn_opcode, 2);
- }
+ install_insn (ip);
/* Update the register mask information. */
if (! mips_opts.mips16)
{
if (pinfo & INSN_WRITE_GPR_D)
- mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD);
+ mips_gprmask |= 1 << EXTRACT_OPERAND (RD, *ip);
if ((pinfo & (INSN_WRITE_GPR_T | INSN_READ_GPR_T)) != 0)
- mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RT) & OP_MASK_RT);
+ mips_gprmask |= 1 << EXTRACT_OPERAND (RT, *ip);
if (pinfo & INSN_READ_GPR_S)
- mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RS) & OP_MASK_RS);
+ mips_gprmask |= 1 << EXTRACT_OPERAND (RS, *ip);
if (pinfo & INSN_WRITE_GPR_31)
mips_gprmask |= 1 << RA;
if (pinfo & INSN_WRITE_FPR_D)
- mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FD) & OP_MASK_FD);
+ mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FD, *ip);
if ((pinfo & (INSN_WRITE_FPR_S | INSN_READ_FPR_S)) != 0)
- mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS);
+ mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FS, *ip);
if ((pinfo & (INSN_WRITE_FPR_T | INSN_READ_FPR_T)) != 0)
- mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT);
+ mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FT, *ip);
if ((pinfo & INSN_READ_FPR_R) != 0)
- mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FR) & OP_MASK_FR);
+ mips_cprmask[1] |= 1 << EXTRACT_OPERAND (FR, *ip);
if (pinfo & INSN_COP)
{
/* We don't keep enough information to sort these cases out.
else
{
if (pinfo & (MIPS16_INSN_WRITE_X | MIPS16_INSN_READ_X))
- mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_RX)
- & MIPS16OP_MASK_RX);
+ mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (RX, *ip);
if (pinfo & (MIPS16_INSN_WRITE_Y | MIPS16_INSN_READ_Y))
- mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_RY)
- & MIPS16OP_MASK_RY);
+ mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (RY, *ip);
if (pinfo & MIPS16_INSN_WRITE_Z)
- mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_RZ)
- & MIPS16OP_MASK_RZ);
+ mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (RZ, *ip);
if (pinfo & (MIPS16_INSN_WRITE_T | MIPS16_INSN_READ_T))
mips_gprmask |= 1 << TREG;
if (pinfo & (MIPS16_INSN_WRITE_SP | MIPS16_INSN_READ_SP))
if (pinfo & MIPS16_INSN_WRITE_GPR_Y)
mips_gprmask |= 1 << MIPS16OP_EXTRACT_REG32R (ip->insn_opcode);
if (pinfo & MIPS16_INSN_READ_Z)
- mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_MOVE32Z)
- & MIPS16OP_MASK_MOVE32Z);
+ mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (MOVE32Z, *ip);
if (pinfo & MIPS16_INSN_READ_GPR_X)
- mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_REGR32)
- & MIPS16OP_MASK_REGR32);
+ mips_gprmask |= 1 << MIPS16_EXTRACT_OPERAND (REGR32, *ip);
}
if (mips_relax.sequence != 2 && !mips_opts.noreorder)
/* If we have seen .set volatile or .set nomove, don't
optimize. */
|| mips_opts.nomove != 0
- /* If we had to emit any NOP instructions, then we
- already know we can not swap. */
- || nops != 0
- /* If we don't even know the previous insn, we can not
- swap. */
- || ! prev_insn_valid
- /* If the previous insn is already in a branch delay
- slot, then we can not swap. */
- || prev_insn_is_delay_slot
+ /* We can't swap if the previous instruction's position
+ is fixed. */
+ || history[0].fixed_p
/* If the previous previous insn was in a .set
noreorder, we can't swap. Actually, the MIPS
assembler will swap in this situation. However, gcc
bne $4,$0,foo
in which we can not swap the bne and INSN. If gcc is
not configured -with-gnu-as, it does not output the
- .set pseudo-ops. We don't have to check
- prev_insn_unreordered, because prev_insn_valid will
- be 0 in that case. We don't want to use
- prev_prev_insn_valid, because we do want to be able
- to swap at the start of a function. */
- || prev_prev_insn_unreordered
+ .set pseudo-ops. */
+ || history[1].noreorder_p
/* If the branch is itself the target of a branch, we
can not swap. We cheat on this; all we check for is
whether there is a label on this instruction. If
frags for different purposes. */
|| (! mips_opts.mips16
&& prev_insn_frag_type == rs_machine_dependent)
- /* If the branch reads the condition codes, we don't
- even try to swap, because in the sequence
- ctc1 $X,$31
- INSN
- INSN
- bc1t LABEL
- we can not swap, and I don't feel like handling that
- case. */
- || (! mips_opts.mips16
- && (pinfo & INSN_READ_COND_CODE)
- && ! cop_interlocks)
- /* We can not swap with an instruction that requires a
- delay slot, because the target of the branch might
- interfere with that instruction. */
- || (! mips_opts.mips16
- && (prev_pinfo
- /* Itbl support may require additional care here. */
- & (INSN_LOAD_COPROC_DELAY
- | INSN_COPROC_MOVE_DELAY
- | INSN_WRITE_COND_CODE))
- && ! cop_interlocks)
- || (! (hilo_interlocks
- || (mips_opts.arch == CPU_R3900 && (pinfo & INSN_MULT)))
- && (prev_pinfo
- & (INSN_READ_LO
- | INSN_READ_HI)))
- || (! mips_opts.mips16
- && (prev_pinfo & INSN_LOAD_MEMORY_DELAY)
- && ! gpr_interlocks)
- || (! mips_opts.mips16
- /* Itbl support may require additional care here. */
- && (prev_pinfo & INSN_COPROC_MEMORY_DELAY)
- && ! cop_mem_interlocks)
- /* We can not swap with a branch instruction. */
- || (prev_pinfo
- & (INSN_UNCOND_BRANCH_DELAY
- | INSN_COND_BRANCH_DELAY
- | INSN_COND_BRANCH_LIKELY))
+ /* Check for conflicts between the branch and the instructions
+ before the candidate delay slot. */
+ || nops_for_insn (history + 1, ip) > 0
+ /* Check for conflicts between the swapped sequence and the
+ target of the branch. */
+ || nops_for_sequence (2, history + 1, ip, history) > 0
/* We do not swap with a trap instruction, since it
complicates trap handlers to have the trap
instruction be in a delay slot. */
instruction sets, we can not swap. */
|| (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_T)
- && insn_uses_reg (ip,
- ((prev_insn.insn_opcode >> OP_SH_RT)
- & OP_MASK_RT),
+ && insn_uses_reg (ip, EXTRACT_OPERAND (RT, history[0]),
MIPS_GR_REG))
|| (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_D)
- && insn_uses_reg (ip,
- ((prev_insn.insn_opcode >> OP_SH_RD)
- & OP_MASK_RD),
+ && insn_uses_reg (ip, EXTRACT_OPERAND (RD, history[0]),
MIPS_GR_REG))
|| (mips_opts.mips16
&& (((prev_pinfo & MIPS16_INSN_WRITE_X)
- && insn_uses_reg (ip,
- ((prev_insn.insn_opcode
- >> MIPS16OP_SH_RX)
- & MIPS16OP_MASK_RX),
- MIPS16_REG))
+ && (insn_uses_reg
+ (ip, MIPS16_EXTRACT_OPERAND (RX, history[0]),
+ MIPS16_REG)))
|| ((prev_pinfo & MIPS16_INSN_WRITE_Y)
- && insn_uses_reg (ip,
- ((prev_insn.insn_opcode
- >> MIPS16OP_SH_RY)
- & MIPS16OP_MASK_RY),
- MIPS16_REG))
+ && (insn_uses_reg
+ (ip, MIPS16_EXTRACT_OPERAND (RY, history[0]),
+ MIPS16_REG)))
|| ((prev_pinfo & MIPS16_INSN_WRITE_Z)
- && insn_uses_reg (ip,
- ((prev_insn.insn_opcode
- >> MIPS16OP_SH_RZ)
- & MIPS16OP_MASK_RZ),
- MIPS16_REG))
+ && (insn_uses_reg
+ (ip, MIPS16_EXTRACT_OPERAND (RZ, history[0]),
+ MIPS16_REG)))
|| ((prev_pinfo & MIPS16_INSN_WRITE_T)
&& insn_uses_reg (ip, TREG, MIPS_GR_REG))
|| ((prev_pinfo & MIPS16_INSN_WRITE_31)
&& insn_uses_reg (ip, RA, MIPS_GR_REG))
|| ((prev_pinfo & MIPS16_INSN_WRITE_GPR_Y)
&& insn_uses_reg (ip,
- MIPS16OP_EXTRACT_REG32R (prev_insn.
- insn_opcode),
+ MIPS16OP_EXTRACT_REG32R
+ (history[0].insn_opcode),
MIPS_GR_REG))))
/* If the branch writes a register that the previous
instruction sets, we can not swap (we know that
|| (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_T)
&& (((pinfo & INSN_WRITE_GPR_D)
- && (((prev_insn.insn_opcode >> OP_SH_RT) & OP_MASK_RT)
- == ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD)))
+ && (EXTRACT_OPERAND (RT, history[0])
+ == EXTRACT_OPERAND (RD, *ip)))
|| ((pinfo & INSN_WRITE_GPR_31)
- && (((prev_insn.insn_opcode >> OP_SH_RT)
- & OP_MASK_RT)
- == RA))))
+ && EXTRACT_OPERAND (RT, history[0]) == RA)))
|| (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_D)
&& (((pinfo & INSN_WRITE_GPR_D)
- && (((prev_insn.insn_opcode >> OP_SH_RD) & OP_MASK_RD)
- == ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD)))
+ && (EXTRACT_OPERAND (RD, history[0])
+ == EXTRACT_OPERAND (RD, *ip)))
|| ((pinfo & INSN_WRITE_GPR_31)
- && (((prev_insn.insn_opcode >> OP_SH_RD)
- & OP_MASK_RD)
- == RA))))
+ && EXTRACT_OPERAND (RD, history[0]) == RA)))
|| (mips_opts.mips16
&& (pinfo & MIPS16_INSN_WRITE_31)
&& ((prev_pinfo & MIPS16_INSN_WRITE_31)
|| ((prev_pinfo & MIPS16_INSN_WRITE_GPR_Y)
- && (MIPS16OP_EXTRACT_REG32R (prev_insn.insn_opcode)
+ && (MIPS16OP_EXTRACT_REG32R (history[0].insn_opcode)
== RA))))
/* If the branch writes a register that the previous
instruction reads, we can not swap (we know that
branches only write to RD or to $31). */
|| (! mips_opts.mips16
&& (pinfo & INSN_WRITE_GPR_D)
- && insn_uses_reg (&prev_insn,
- ((ip->insn_opcode >> OP_SH_RD)
- & OP_MASK_RD),
+ && insn_uses_reg (&history[0],
+ EXTRACT_OPERAND (RD, *ip),
MIPS_GR_REG))
|| (! mips_opts.mips16
&& (pinfo & INSN_WRITE_GPR_31)
- && insn_uses_reg (&prev_insn, RA, MIPS_GR_REG))
+ && insn_uses_reg (&history[0], RA, MIPS_GR_REG))
|| (mips_opts.mips16
&& (pinfo & MIPS16_INSN_WRITE_31)
- && insn_uses_reg (&prev_insn, RA, MIPS_GR_REG))
- /* If the previous previous instruction has a load
- delay, and sets a register that the branch reads, we
- can not swap. */
- || (! mips_opts.mips16
- /* Itbl support may require additional care here. */
- && (((prev_prev_insn.insn_mo->pinfo & INSN_LOAD_COPROC_DELAY)
- && ! cop_interlocks)
- || ((prev_prev_insn.insn_mo->pinfo
- & INSN_LOAD_MEMORY_DELAY)
- && ! gpr_interlocks))
- && insn_uses_reg (ip,
- ((prev_prev_insn.insn_opcode >> OP_SH_RT)
- & OP_MASK_RT),
- MIPS_GR_REG))
+ && insn_uses_reg (&history[0], RA, MIPS_GR_REG))
/* If one instruction sets a condition code and the
other one uses a condition code, we can not swap. */
|| ((pinfo & INSN_READ_COND_CODE)
swap. */
|| (mips_opts.mips16
&& (prev_pinfo & MIPS16_INSN_READ_PC))
- /* If the previous instruction was extended, we can not
- swap. */
- || (mips_opts.mips16 && prev_insn_extended)
/* If the previous instruction had a fixup in mips16
mode, we can not swap. This normally means that the
previous instruction was a 4 byte branch anyhow. */
- || (mips_opts.mips16 && prev_insn_fixp[0])
+ || (mips_opts.mips16 && history[0].fixp[0])
/* If the previous instruction is a sync, sync.l, or
sync.p, we can not swap. */
|| (prev_pinfo & INSN_SYNC))
{
- /* We could do even better for unconditional branches to
- portions of this object file; we could pick up the
- instruction at the destination, put it in the delay
- slot, and bump the destination address. */
- emit_nop ();
+ if (mips_opts.mips16
+ && (pinfo & INSN_UNCOND_BRANCH_DELAY)
+ && (pinfo & (MIPS16_INSN_READ_X | MIPS16_INSN_READ_31))
+ && (mips_opts.isa == ISA_MIPS32
+ || mips_opts.isa == ISA_MIPS32R2
+ || mips_opts.isa == ISA_MIPS64
+ || mips_opts.isa == ISA_MIPS64R2))
+ {
+ /* Convert MIPS16 jr/jalr into a "compact" jump. */
+ ip->insn_opcode |= 0x0080;
+ install_insn (ip);
+ insert_into_history (0, 1, ip);
+ }
+ else
+ {
+ /* We could do even better for unconditional branches to
+ portions of this object file; we could pick up the
+ instruction at the destination, put it in the delay
+ slot, and bump the destination address. */
+ insert_into_history (0, 1, ip);
+ emit_nop ();
+ }
+
if (mips_relax.sequence)
mips_relax.sizes[mips_relax.sequence - 1] += 4;
- /* Update the previous insn information. */
- prev_prev_insn = *ip;
- prev_insn.insn_mo = &dummy_opcode;
}
else
{
/* It looks like we can actually do the swap. */
- if (! mips_opts.mips16)
+ struct mips_cl_insn delay = history[0];
+ if (mips_opts.mips16)
{
- char *prev_f;
- char temp[4];
-
- prev_f = prev_insn_frag->fr_literal + prev_insn_where;
- if (!relaxed_branch)
- {
- /* If this is not a relaxed branch, then just
- swap the instructions. */
- memcpy (temp, prev_f, 4);
- memcpy (prev_f, f, 4);
- memcpy (f, temp, 4);
- }
- else
- {
- /* If this is a relaxed branch, then we move the
- instruction to be placed in the delay slot to
- the current frag, shrinking the fixed part of
- the originating frag. If the branch occupies
- the tail of the latter, we move it backwards,
- into the space freed by the moved instruction. */
- f = frag_more (4);
- memcpy (f, prev_f, 4);
- prev_insn_frag->fr_fix -= 4;
- if (prev_insn_frag->fr_type == rs_machine_dependent)
- memmove (prev_f, prev_f + 4, prev_insn_frag->fr_var);
- }
-
- if (prev_insn_fixp[0])
- {
- prev_insn_fixp[0]->fx_frag = frag_now;
- prev_insn_fixp[0]->fx_where = f - frag_now->fr_literal;
- }
- if (prev_insn_fixp[1])
- {
- prev_insn_fixp[1]->fx_frag = frag_now;
- prev_insn_fixp[1]->fx_where = f - frag_now->fr_literal;
- }
- if (prev_insn_fixp[2])
- {
- prev_insn_fixp[2]->fx_frag = frag_now;
- prev_insn_fixp[2]->fx_where = f - frag_now->fr_literal;
- }
- if (prev_insn_fixp[0] && HAVE_NEWABI
- && prev_insn_frag != frag_now
- && (prev_insn_fixp[0]->fx_r_type
- == BFD_RELOC_MIPS_GOT_DISP
- || (prev_insn_fixp[0]->fx_r_type
- == BFD_RELOC_MIPS_CALL16)))
- {
- /* To avoid confusion in tc_gen_reloc, we must
- ensure that this does not become a variant
- frag. */
- force_new_frag = TRUE;
- }
-
- if (!relaxed_branch)
- {
- if (fixp[0])
- {
- fixp[0]->fx_frag = prev_insn_frag;
- fixp[0]->fx_where = prev_insn_where;
- }
- if (fixp[1])
- {
- fixp[1]->fx_frag = prev_insn_frag;
- fixp[1]->fx_where = prev_insn_where;
- }
- if (fixp[2])
- {
- fixp[2]->fx_frag = prev_insn_frag;
- fixp[2]->fx_where = prev_insn_where;
- }
- }
- else if (prev_insn_frag->fr_type == rs_machine_dependent)
- {
- if (fixp[0])
- fixp[0]->fx_where -= 4;
- if (fixp[1])
- fixp[1]->fx_where -= 4;
- if (fixp[2])
- fixp[2]->fx_where -= 4;
- }
+ know (delay.frag == ip->frag);
+ move_insn (ip, delay.frag, delay.where);
+ move_insn (&delay, ip->frag, ip->where + insn_length (ip));
+ }
+ else if (relaxed_branch)
+ {
+ /* Add the delay slot instruction to the end of the
+ current frag and shrink the fixed part of the
+ original frag. If the branch occupies the tail of
+ the latter, move it backwards to cover the gap. */
+ delay.frag->fr_fix -= 4;
+ if (delay.frag == ip->frag)
+ move_insn (ip, ip->frag, ip->where - 4);
+ add_fixed_insn (&delay);
}
else
{
- char *prev_f;
- char temp[2];
-
- assert (prev_insn_fixp[0] == NULL);
- assert (prev_insn_fixp[1] == NULL);
- assert (prev_insn_fixp[2] == NULL);
- prev_f = prev_insn_frag->fr_literal + prev_insn_where;
- memcpy (temp, prev_f, 2);
- memcpy (prev_f, f, 2);
- if (*reloc_type != BFD_RELOC_MIPS16_JMP)
- {
- assert (*reloc_type == BFD_RELOC_UNUSED);
- memcpy (f, temp, 2);
- }
- else
- {
- memcpy (f, f + 2, 2);
- memcpy (f + 2, temp, 2);
- }
- if (fixp[0])
- {
- fixp[0]->fx_frag = prev_insn_frag;
- fixp[0]->fx_where = prev_insn_where;
- }
- if (fixp[1])
- {
- fixp[1]->fx_frag = prev_insn_frag;
- fixp[1]->fx_where = prev_insn_where;
- }
- if (fixp[2])
- {
- fixp[2]->fx_frag = prev_insn_frag;
- fixp[2]->fx_where = prev_insn_where;
- }
+ move_insn (&delay, ip->frag, ip->where);
+ move_insn (ip, history[0].frag, history[0].where);
}
-
- /* Update the previous insn information; leave prev_insn
- unchanged. */
- prev_prev_insn = *ip;
+ history[0] = *ip;
+ delay.fixed_p = 1;
+ insert_into_history (0, 1, &delay);
}
- prev_insn_is_delay_slot = 1;
/* If that was an unconditional branch, forget the previous
insn information. */
if (pinfo & INSN_UNCOND_BRANCH_DELAY)
- {
- prev_prev_insn.insn_mo = &dummy_opcode;
- prev_insn.insn_mo = &dummy_opcode;
- }
-
- prev_insn_fixp[0] = NULL;
- prev_insn_fixp[1] = NULL;
- prev_insn_fixp[2] = NULL;
- prev_insn_reloc_type[0] = BFD_RELOC_UNUSED;
- prev_insn_reloc_type[1] = BFD_RELOC_UNUSED;
- prev_insn_reloc_type[2] = BFD_RELOC_UNUSED;
- prev_insn_extended = 0;
+ mips_no_prev_insn ();
}
else if (pinfo & INSN_COND_BRANCH_LIKELY)
{
is look at the target, copy the instruction found there
into the delay slot, and increment the branch to jump to
the next instruction. */
+ insert_into_history (0, 1, ip);
emit_nop ();
- /* Update the previous insn information. */
- prev_prev_insn = *ip;
- prev_insn.insn_mo = &dummy_opcode;
- prev_insn_fixp[0] = NULL;
- prev_insn_fixp[1] = NULL;
- prev_insn_fixp[2] = NULL;
- prev_insn_reloc_type[0] = BFD_RELOC_UNUSED;
- prev_insn_reloc_type[1] = BFD_RELOC_UNUSED;
- prev_insn_reloc_type[2] = BFD_RELOC_UNUSED;
- prev_insn_extended = 0;
- prev_insn_is_delay_slot = 1;
}
else
- {
- /* Update the previous insn information. */
- if (nops > 0)
- prev_prev_insn.insn_mo = &dummy_opcode;
- else
- prev_prev_insn = prev_insn;
- prev_insn = *ip;
-
- /* Any time we see a branch, we always fill the delay slot
- immediately; since this insn is not a branch, we know it
- is not in a delay slot. */
- prev_insn_is_delay_slot = 0;
-
- prev_insn_fixp[0] = fixp[0];
- prev_insn_fixp[1] = fixp[1];
- prev_insn_fixp[2] = fixp[2];
- prev_insn_reloc_type[0] = reloc_type[0];
- prev_insn_reloc_type[1] = reloc_type[1];
- prev_insn_reloc_type[2] = reloc_type[2];
- if (mips_opts.mips16)
- prev_insn_extended = (ip->use_extend
- || *reloc_type > BFD_RELOC_UNUSED);
- }
-
- prev_prev_insn_unreordered = prev_insn_unreordered;
- prev_insn_unreordered = 0;
- prev_insn_frag = frag_now;
- prev_insn_where = f - frag_now->fr_literal;
- prev_insn_valid = 1;
- }
- else if (mips_relax.sequence != 2)
- {
- /* We need to record a bit of information even when we are not
- reordering, in order to determine the base address for mips16
- PC relative relocs. */
- prev_prev_insn = prev_insn;
- prev_insn = *ip;
- prev_insn_reloc_type[0] = reloc_type[0];
- prev_insn_reloc_type[1] = reloc_type[1];
- prev_insn_reloc_type[2] = reloc_type[2];
- prev_prev_insn_unreordered = prev_insn_unreordered;
- prev_insn_unreordered = 1;
+ insert_into_history (0, 1, ip);
}
+ else
+ insert_into_history (0, 1, ip);
/* We just output an insn, so the next one doesn't have a label. */
mips_clear_insn_labels ();
}
-/* This function forgets that there was any previous instruction or
- label. If PRESERVE is non-zero, it remembers enough information to
- know whether nops are needed before a noreorder section. */
+/* Forget that there was any previous instruction or label. */
static void
-mips_no_prev_insn (int preserve)
+mips_no_prev_insn (void)
{
- if (! preserve)
- {
- prev_insn.insn_mo = &dummy_opcode;
- prev_prev_insn.insn_mo = &dummy_opcode;
- prev_nop_frag = NULL;
- prev_nop_frag_holds = 0;
- prev_nop_frag_required = 0;
- prev_nop_frag_since = 0;
- }
- prev_insn_valid = 0;
- prev_insn_is_delay_slot = 0;
- prev_insn_unreordered = 0;
- prev_insn_extended = 0;
- prev_insn_reloc_type[0] = BFD_RELOC_UNUSED;
- prev_insn_reloc_type[1] = BFD_RELOC_UNUSED;
- prev_insn_reloc_type[2] = BFD_RELOC_UNUSED;
- prev_prev_insn_unreordered = 0;
+ prev_nop_frag = NULL;
+ insert_into_history (0, ARRAY_SIZE (history), NOP_INSN);
mips_clear_insn_labels ();
}
-/* This function must be called whenever we turn on noreorder or emit
- something other than instructions. It inserts any NOPS which might
- be needed by the previous instruction, and clears the information
- kept for the previous instructions. The INSNS parameter is true if
- instructions are to follow. */
+/* This function must be called before we emit something other than
+ instructions. It is like mips_no_prev_insn except that it inserts
+ any NOPS that might be needed by previous instructions. */
-static void
-mips_emit_delays (bfd_boolean insns)
+void
+mips_emit_delays (void)
{
if (! mips_opts.noreorder)
{
- int nops;
-
- nops = 0;
- if ((! mips_opts.mips16
- && ((prev_insn.insn_mo->pinfo
- & (INSN_LOAD_COPROC_DELAY
- | INSN_COPROC_MOVE_DELAY
- | INSN_WRITE_COND_CODE))
- && ! cop_interlocks))
- || (! hilo_interlocks
- && (prev_insn.insn_mo->pinfo
- & (INSN_READ_LO
- | INSN_READ_HI)))
- || (! mips_opts.mips16
- && (prev_insn.insn_mo->pinfo & INSN_LOAD_MEMORY_DELAY)
- && ! gpr_interlocks)
- || (! mips_opts.mips16
- && (prev_insn.insn_mo->pinfo & INSN_COPROC_MEMORY_DELAY)
- && ! cop_mem_interlocks))
- {
- /* Itbl support may require additional care here. */
- ++nops;
- if ((! mips_opts.mips16
- && ((prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
- && ! cop_interlocks))
- || (! hilo_interlocks
- && ((prev_insn.insn_mo->pinfo & INSN_READ_HI)
- || (prev_insn.insn_mo->pinfo & INSN_READ_LO))))
- ++nops;
-
- if (prev_insn_unreordered)
- nops = 0;
- }
- else if ((! mips_opts.mips16
- && ((prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
- && ! cop_interlocks))
- || (! hilo_interlocks
- && ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
- || (prev_prev_insn.insn_mo->pinfo & INSN_READ_LO))))
+ int nops = nops_for_insn (history, NULL);
+ if (nops > 0)
{
- /* Itbl support may require additional care here. */
- if (! prev_prev_insn_unreordered)
- ++nops;
+ while (nops-- > 0)
+ add_fixed_insn (NOP_INSN);
+ mips_move_labels ();
}
+ }
+ mips_no_prev_insn ();
+}
- if (mips_fix_vr4120 && prev_insn.insn_mo->name)
- {
- int min_nops = 0;
- const char *pn = prev_insn.insn_mo->name;
- if (strncmp (pn, "macc", 4) == 0
- || strncmp (pn, "dmacc", 5) == 0
- || strncmp (pn, "dmult", 5) == 0
- || strstr (pn, "div"))
- min_nops = 1;
- if (nops < min_nops)
- nops = min_nops;
- }
+/* Start a (possibly nested) noreorder block. */
+static void
+start_noreorder (void)
+{
+ if (mips_opts.noreorder == 0)
+ {
+ unsigned int i;
+ int nops;
+
+ /* None of the instructions before the .set noreorder can be moved. */
+ for (i = 0; i < ARRAY_SIZE (history); i++)
+ history[i].fixed_p = 1;
+
+ /* Insert any nops that might be needed between the .set noreorder
+ block and the previous instructions. We will later remove any
+ nops that turn out not to be needed. */
+ nops = nops_for_insn (history, NULL);
if (nops > 0)
{
- struct insn_label_list *l;
-
- if (insns)
+ if (mips_optimize != 0)
{
/* Record the frag which holds the nop instructions, so
that we can remove them if we don't need them. */
}
for (; nops > 0; --nops)
- emit_nop ();
+ add_fixed_insn (NOP_INSN);
- if (insns)
- {
- /* Move on to a new frag, so that it is safe to simply
- decrease the size of prev_nop_frag. */
- frag_wane (frag_now);
- frag_new (0);
- }
-
- for (l = insn_labels; l != NULL; l = l->next)
- {
- valueT val;
-
- assert (S_GET_SEGMENT (l->label) == now_seg);
- symbol_set_frag (l->label, frag_now);
- val = (valueT) frag_now_fix ();
- /* mips16 text labels are stored as odd. */
- if (mips_opts.mips16)
- ++val;
- S_SET_VALUE (l->label, val);
- }
+ /* Move on to a new frag, so that it is safe to simply
+ decrease the size of prev_nop_frag. */
+ frag_wane (frag_now);
+ frag_new (0);
+ mips_move_labels ();
}
+ mips16_mark_labels ();
+ mips_clear_insn_labels ();
}
+ mips_opts.noreorder++;
+ mips_any_noreorder = 1;
+}
- /* Mark instruction labels in mips16 mode. */
- if (insns)
- mips16_mark_labels ();
+/* End a nested noreorder block. */
- mips_no_prev_insn (insns);
+static void
+end_noreorder (void)
+{
+ mips_opts.noreorder--;
+ if (mips_opts.noreorder == 0 && prev_nop_frag != NULL)
+ {
+ /* Commit to inserting prev_nop_frag_required nops and go back to
+ handling nop insertion the .set reorder way. */
+ prev_nop_frag->fr_fix -= ((prev_nop_frag_holds - prev_nop_frag_required)
+ * (mips_opts.mips16 ? 2 : 4));
+ insert_into_history (prev_nop_frag_since,
+ prev_nop_frag_required, NOP_INSN);
+ prev_nop_frag = NULL;
+ }
}
/* Set up global variables for the start of a new macro. */
{
memset (&mips_macro_warning.sizes, 0, sizeof (mips_macro_warning.sizes));
mips_macro_warning.delay_slot_p = (mips_opts.noreorder
- && (prev_insn.insn_mo->pinfo
+ && (history[0].insn_mo->pinfo
& (INSN_UNCOND_BRANCH_DELAY
| INSN_COND_BRANCH_DELAY
| INSN_COND_BRANCH_LIKELY)) != 0);
static void
macro_build (expressionS *ep, const char *name, const char *fmt, ...)
{
+ const struct mips_opcode *mo;
struct mips_cl_insn insn;
bfd_reloc_code_real_type r[3];
va_list args;
r[0] = BFD_RELOC_UNUSED;
r[1] = BFD_RELOC_UNUSED;
r[2] = BFD_RELOC_UNUSED;
- insn.insn_mo = (struct mips_opcode *) hash_find (op_hash, name);
- assert (insn.insn_mo);
- assert (strcmp (name, insn.insn_mo->name) == 0);
-
- /* Search until we get a match for NAME. */
- while (1)
- {
- /* It is assumed here that macros will never generate
- MDMX or MIPS-3D instructions. */
- if (strcmp (fmt, insn.insn_mo->args) == 0
- && insn.insn_mo->pinfo != INSN_MACRO
- && OPCODE_IS_MEMBER (insn.insn_mo,
- (mips_opts.isa
- | (file_ase_mips16 ? INSN_MIPS16 : 0)),
+ mo = (struct mips_opcode *) hash_find (op_hash, name);
+ assert (mo);
+ assert (strcmp (name, mo->name) == 0);
+
+ /* Search until we get a match for NAME. It is assumed here that
+ macros will never generate MDMX or MIPS-3D instructions. */
+ while (strcmp (fmt, mo->args) != 0
+ || mo->pinfo == INSN_MACRO
+ || !OPCODE_IS_MEMBER (mo,
+ (mips_opts.isa
+ | (mips_opts.mips16 ? INSN_MIPS16 : 0)
+ | (mips_opts.ase_smartmips ? INSN_SMARTMIPS : 0)),
mips_opts.arch)
- && (mips_opts.arch != CPU_R4650 || (insn.insn_mo->pinfo & FP_D) == 0))
- break;
-
- ++insn.insn_mo;
- assert (insn.insn_mo->name);
- assert (strcmp (name, insn.insn_mo->name) == 0);
+ || (mips_opts.arch == CPU_R4650 && (mo->pinfo & FP_D) != 0))
+ {
+ ++mo;
+ assert (mo->name);
+ assert (strcmp (name, mo->name) == 0);
}
- insn.insn_opcode = insn.insn_mo->match;
+ create_insn (&insn, mo);
for (;;)
{
switch (*fmt++)
{
case 'A':
case 'E':
- insn.insn_opcode |= (va_arg (args, int)
- & OP_MASK_SHAMT) << OP_SH_SHAMT;
+ INSERT_OPERAND (SHAMT, insn, va_arg (args, int));
continue;
case 'B':
in MSB form. (When handling the instruction in the
non-macro case, these arguments are sizes from which
MSB values must be calculated.) */
- insn.insn_opcode |= (va_arg (args, int)
- & OP_MASK_INSMSB) << OP_SH_INSMSB;
+ INSERT_OPERAND (INSMSB, insn, va_arg (args, int));
continue;
case 'C':
in MSBD form. (When handling the instruction in the
non-macro case, these arguments are sizes from which
MSBD values must be calculated.) */
- insn.insn_opcode |= (va_arg (args, int)
- & OP_MASK_EXTMSBD) << OP_SH_EXTMSBD;
+ INSERT_OPERAND (EXTMSBD, insn, va_arg (args, int));
continue;
default:
case 't':
case 'w':
case 'E':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_RT;
+ INSERT_OPERAND (RT, insn, va_arg (args, int));
continue;
case 'c':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_CODE;
+ INSERT_OPERAND (CODE, insn, va_arg (args, int));
continue;
case 'T':
case 'W':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_FT;
+ INSERT_OPERAND (FT, insn, va_arg (args, int));
continue;
case 'd':
case 'G':
case 'K':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_RD;
+ INSERT_OPERAND (RD, insn, va_arg (args, int));
continue;
case 'U':
{
int tmp = va_arg (args, int);
- insn.insn_opcode |= tmp << OP_SH_RT;
- insn.insn_opcode |= tmp << OP_SH_RD;
+ INSERT_OPERAND (RT, insn, tmp);
+ INSERT_OPERAND (RD, insn, tmp);
continue;
}
case 'V':
case 'S':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_FS;
+ INSERT_OPERAND (FS, insn, va_arg (args, int));
continue;
case 'z':
continue;
case '<':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_SHAMT;
+ INSERT_OPERAND (SHAMT, insn, va_arg (args, int));
continue;
case 'D':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_FD;
+ INSERT_OPERAND (FD, insn, va_arg (args, int));
continue;
case 'B':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_CODE20;
+ INSERT_OPERAND (CODE20, insn, va_arg (args, int));
continue;
case 'J':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_CODE19;
+ INSERT_OPERAND (CODE19, insn, va_arg (args, int));
continue;
case 'q':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_CODE2;
+ INSERT_OPERAND (CODE2, insn, va_arg (args, int));
continue;
case 'b':
case 's':
case 'r':
case 'v':
- insn.insn_opcode |= va_arg (args, int) << OP_SH_RS;
+ INSERT_OPERAND (RS, insn, va_arg (args, int));
continue;
case 'i':
case 'p':
assert (ep != NULL);
+
/*
* This allows macro() to pass an immediate expression for
* creating short branches without creating a symbol.
- * Note that the expression still might come from the assembly
- * input, in which case the value is not checked for range nor
- * is a relocation entry generated (yuck).
+ *
+ * We don't allow branch relaxation for these branches, as
+ * they should only appear in ".set nomacro" anyway.
*/
if (ep->X_op == O_constant)
{
+ if ((ep->X_add_number & 3) != 0)
+ as_bad (_("branch to misaligned address (0x%lx)"),
+ (unsigned long) ep->X_add_number);
+ if ((ep->X_add_number + 0x20000) & ~0x3ffff)
+ as_bad (_("branch address range overflow (0x%lx)"),
+ (unsigned long) ep->X_add_number);
insn.insn_opcode |= (ep->X_add_number >> 2) & 0xffff;
ep = NULL;
}
insn.insn_opcode |= va_arg (args, unsigned long);
continue;
+ case 'k':
+ insn.insn_opcode |= va_arg (args, unsigned long) << OP_SH_CACHE;
+ continue;
+
default:
internalError ();
}
mips16_macro_build (expressionS *ep, const char *name, const char *fmt,
va_list args)
{
+ struct mips_opcode *mo;
struct mips_cl_insn insn;
bfd_reloc_code_real_type r[3]
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
- insn.insn_mo = (struct mips_opcode *) hash_find (mips16_op_hash, name);
- assert (insn.insn_mo);
- assert (strcmp (name, insn.insn_mo->name) == 0);
+ mo = (struct mips_opcode *) hash_find (mips16_op_hash, name);
+ assert (mo);
+ assert (strcmp (name, mo->name) == 0);
- while (strcmp (fmt, insn.insn_mo->args) != 0
- || insn.insn_mo->pinfo == INSN_MACRO)
+ while (strcmp (fmt, mo->args) != 0 || mo->pinfo == INSN_MACRO)
{
- ++insn.insn_mo;
- assert (insn.insn_mo->name);
- assert (strcmp (name, insn.insn_mo->name) == 0);
+ ++mo;
+ assert (mo->name);
+ assert (strcmp (name, mo->name) == 0);
}
- insn.insn_opcode = insn.insn_mo->match;
- insn.use_extend = FALSE;
-
+ create_insn (&insn, mo);
for (;;)
{
int c;
case 'y':
case 'w':
- insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_RY;
+ MIPS16_INSERT_OPERAND (RY, insn, va_arg (args, int));
continue;
case 'x':
case 'v':
- insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_RX;
+ MIPS16_INSERT_OPERAND (RX, insn, va_arg (args, int));
continue;
case 'z':
- insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_RZ;
+ MIPS16_INSERT_OPERAND (RZ, insn, va_arg (args, int));
continue;
case 'Z':
- insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_MOVE32Z;
+ MIPS16_INSERT_OPERAND (MOVE32Z, insn, va_arg (args, int));
continue;
case '0':
continue;
case 'X':
- insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_REGR32;
+ MIPS16_INSERT_OPERAND (REGR32, insn, va_arg (args, int));
continue;
case 'Y':
continue;
case '6':
- insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_IMM6;
+ MIPS16_INSERT_OPERAND (IMM6, insn, va_arg (args, int));
continue;
}
append_insn (&insn, ep, r);
}
+/*
+ * Sign-extend 32-bit mode constants that have bit 31 set and all
+ * higher bits unset.
+ */
+static void
+normalize_constant_expr (expressionS *ex)
+{
+ if (ex->X_op == O_constant
+ && IS_ZEXT_32BIT_NUM (ex->X_add_number))
+ ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
+ - 0x80000000);
+}
+
+/*
+ * Sign-extend 32-bit mode address offsets that have bit 31 set and
+ * all higher bits unset.
+ */
+static void
+normalize_address_expr (expressionS *ex)
+{
+ if (((ex->X_op == O_constant && HAVE_32BIT_ADDRESSES)
+ || (ex->X_op == O_symbol && HAVE_32BIT_SYMBOLS))
+ && IS_ZEXT_32BIT_NUM (ex->X_add_number))
+ ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
+ - 0x80000000);
+}
+
/*
* Generate a "jalr" instruction with a relocation hint to the called
* function. This occurs in NewABI PIC code.
macro_build_lui (expressionS *ep, int regnum)
{
expressionS high_expr;
+ const struct mips_opcode *mo;
struct mips_cl_insn insn;
bfd_reloc_code_real_type r[3]
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
else
{
assert (ep->X_op == O_symbol);
- /* _gp_disp is a special case, used from s_cpload. _gp is used
- if mips_no_shared. */
+ /* _gp_disp is a special case, used from s_cpload.
+ __gnu_local_gp is used if mips_no_shared. */
assert (mips_pic == NO_PIC
|| (! HAVE_NEWABI
&& strcmp (S_GET_NAME (ep->X_add_symbol), "_gp_disp") == 0)
|| (! mips_in_shared
- && strcmp (S_GET_NAME (ep->X_add_symbol), "_gp") == 0));
+ && strcmp (S_GET_NAME (ep->X_add_symbol),
+ "__gnu_local_gp") == 0));
*r = BFD_RELOC_HI16_S;
}
- insn.insn_mo = (struct mips_opcode *) hash_find (op_hash, name);
- assert (insn.insn_mo);
- assert (strcmp (name, insn.insn_mo->name) == 0);
- assert (strcmp (fmt, insn.insn_mo->args) == 0);
+ mo = hash_find (op_hash, name);
+ assert (strcmp (name, mo->name) == 0);
+ assert (strcmp (fmt, mo->args) == 0);
+ create_insn (&insn, mo);
- insn.insn_opcode = insn.insn_mo->match | (regnum << OP_SH_RT);
+ insn.insn_opcode = insn.insn_mo->match;
+ INSERT_OPERAND (RT, insn, regnum);
if (*r == BFD_RELOC_UNUSED)
{
insn.insn_opcode |= high_expr.X_add_number;
assert (ep->X_op == O_constant);
/* Sign-extending 32-bit constants makes their handling easier. */
- if (! dbl && ! ((ep->X_add_number & ~((bfd_vma) 0x7fffffff))
- == ~((bfd_vma) 0x7fffffff)))
- {
- if (ep->X_add_number & ~((bfd_vma) 0xffffffff))
- as_bad (_("constant too large"));
-
- ep->X_add_number = (((ep->X_add_number & 0xffffffff) ^ 0x80000000)
- - 0x80000000);
- }
+ if (!dbl)
+ normalize_constant_expr (ep);
/* Right now, this routine can only handle signed 32-bit constants. */
if (! IS_SEXT_32BIT_NUM(ep->X_add_number + 0x8000))
}
}
-static void
-normalize_constant_expr (expressionS *ex)
-{
- if (ex->X_op == O_constant && HAVE_32BIT_GPRS)
- ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
- - 0x80000000);
-}
-
/* Warn if an expression is not a constant. */
static void
if (ex->X_op == O_big)
as_bad (_("unsupported large constant"));
else if (ex->X_op != O_constant)
- as_bad (_("Instruction %s requires absolute expression"), ip->insn_mo->name);
+ as_bad (_("Instruction %s requires absolute expression"),
+ ip->insn_mo->name);
- normalize_constant_expr (ex);
+ if (HAVE_32BIT_GPRS)
+ normalize_constant_expr (ex);
}
/* Count the leading zeroes by performing a binary chop. This is a
assert (ep->X_op == O_constant);
/* Sign-extending 32-bit constants makes their handling easier. */
- if (! dbl && ! ((ep->X_add_number & ~((bfd_vma) 0x7fffffff))
- == ~((bfd_vma) 0x7fffffff)))
- {
- if (ep->X_add_number & ~((bfd_vma) 0xffffffff))
- as_bad (_("constant too large"));
-
- ep->X_add_number = (((ep->X_add_number & 0xffffffff) ^ 0x80000000)
- - 0x80000000);
- }
+ if (!dbl)
+ normalize_constant_expr (ep);
if (IS_SEXT_16BIT_NUM (ep->X_add_number))
{
/* The value is larger than 32 bits. */
- if (HAVE_32BIT_GPRS)
+ if (!dbl || HAVE_32BIT_GPRS)
{
- as_bad (_("Number (0x%lx) larger than 32 bits"),
- (unsigned long) ep->X_add_number);
+ char value[32];
+
+ sprintf_vma (value, ep->X_add_number);
+ as_bad (_("Number (0x%s) larger than 32 bits"), value);
macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
return;
}
daddiu $reg,<sym> (BFD_RELOC_HI16_S)
dsll $reg,16
daddiu $reg,<sym> (BFD_RELOC_LO16)
- */
- if (HAVE_64BIT_ADDRESSES)
+
+ For GP relative symbols in 64bit address space we can use
+ the same sequence as in 32bit address space. */
+ if (HAVE_64BIT_SYMBOLS)
{
- /* ??? We don't provide a GP-relative alternative for these macros.
- It used not to be possible with the original relaxation code,
- but it could be done now. */
+ if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (ep->X_add_symbol, 1))
+ {
+ relax_start (ep->X_add_symbol);
+ macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg,
+ mips_gp_register, BFD_RELOC_GPREL16);
+ relax_switch ();
+ }
if (*used_at == 0 && !mips_opts.noat)
{
macro_build (NULL, "dsll", "d,w,<", reg, reg, 16);
macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_LO16);
}
+
+ if (mips_relax.sequence)
+ relax_end ();
}
else
{
if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET
- && ! nopic_need_relax (ep->X_add_symbol, 1))
+ && !nopic_need_relax (ep->X_add_symbol, 1))
{
relax_start (ep->X_add_symbol);
macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg,
relax_end ();
}
}
- else if (mips_pic == SVR4_PIC && ! mips_big_got)
+ else if (!mips_big_got)
{
expressionS ex;
}
}
}
- else if (mips_pic == SVR4_PIC)
+ else if (mips_big_got)
{
expressionS ex;
sub v0,$zero,$a0
*/
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
expr1.X_add_number = 8;
macro_build (&expr1, "bgez", "s,p", sreg);
move_register (dreg, sreg);
macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", dreg, 0, sreg);
- --mips_opts.noreorder;
+ end_noreorder ();
break;
case M_ADD_I:
break;
}
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
if (mips_trap)
{
macro_build (NULL, "teq", "s,t,q", treg, 0, 7);
macro_build (NULL, "teq", "s,t,q", sreg, AT, 6);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
- --mips_opts.noreorder;
+ end_noreorder ();
}
else
{
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
- --mips_opts.noreorder;
+ end_noreorder ();
macro_build (NULL, "break", "c", 6);
}
s = "ddivu";
s2 = "mfhi";
do_divu3:
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
if (mips_trap)
{
macro_build (NULL, "teq", "s,t,q", treg, 0, 7);
macro_build (NULL, s, "z,s,t", sreg, treg);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
- --mips_opts.noreorder;
+ end_noreorder ();
}
else
{
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
- --mips_opts.noreorder;
+ end_noreorder ();
macro_build (NULL, "break", "c", 7);
}
macro_build (NULL, s2, "d", dreg);
&& offset_expr.X_add_number >= -0x8000
&& offset_expr.X_add_number < 0x8000)
{
- macro_build (&offset_expr,
- (dbl || HAVE_64BIT_ADDRESSES) ? "daddiu" : "addiu",
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN,
"t,r,j", treg, sreg, BFD_RELOC_LO16);
break;
}
}
if (offset_expr.X_op == O_constant)
- load_register (tempreg, &offset_expr,
- (mips_pic == NO_PIC
- ? (dbl || HAVE_64BIT_ADDRESSES)
- : HAVE_64BIT_ADDRESSES));
+ load_register (tempreg, &offset_expr, HAVE_64BIT_ADDRESSES);
else if (mips_pic == NO_PIC)
{
/* If this is a reference to a GP relative symbol, we want
If we have a constant, we need two instructions anyhow,
so we may as well always use the latter form.
- With 64bit address space and a usable $at we want
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- lui $at,<sym> (BFD_RELOC_HI16_S)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- daddiu $at,<sym> (BFD_RELOC_LO16)
- dsll32 $tempreg,0
- daddu $tempreg,$tempreg,$at
-
- If $at is already in use, we use a path which is suboptimal
- on superscalar processors.
- lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
- daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
- dsll $tempreg,16
- daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
- dsll $tempreg,16
- daddiu $tempreg,<sym> (BFD_RELOC_LO16)
- */
- if (HAVE_64BIT_ADDRESSES)
+ With 64bit address space and a usable $at we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ lui $at,<sym> (BFD_RELOC_HI16_S)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ daddiu $at,<sym> (BFD_RELOC_LO16)
+ dsll32 $tempreg,0
+ daddu $tempreg,$tempreg,$at
+
+ If $at is already in use, we use a path which is suboptimal
+ on superscalar processors.
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
+ daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
+ dsll $tempreg,16
+ daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
+ dsll $tempreg,16
+ daddiu $tempreg,<sym> (BFD_RELOC_LO16)
+
+ For GP relative symbols in 64bit address space we can use
+ the same sequence as in 32bit address space. */
+ if (HAVE_64BIT_SYMBOLS)
{
- /* ??? We don't provide a GP-relative alternative for
- these macros. It used not to be possible with the
- original relaxation code, but it could be done now. */
+ if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
+ tempreg, mips_gp_register, BFD_RELOC_GPREL16);
+ relax_switch ();
+ }
if (used_at == 0 && !mips_opts.noat)
{
macro_build (&offset_expr, "daddiu", "t,r,j",
tempreg, tempreg, BFD_RELOC_LO16);
}
+
+ if (mips_relax.sequence)
+ relax_end ();
}
else
{
if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && ! nopic_need_relax (offset_expr.X_add_symbol, 1))
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
{
relax_start (offset_expr.X_add_symbol);
macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
relax_end ();
}
}
- else if (mips_pic == SVR4_PIC && ! mips_big_got && ! HAVE_NEWABI)
+ else if (!mips_big_got && !HAVE_NEWABI)
{
int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
if (offset_expr.X_add_number == 0)
{
- if (breg == 0 && (call || tempreg == PIC_CALL_REG))
+ if (mips_pic == SVR4_PIC
+ && breg == 0
+ && (call || tempreg == PIC_CALL_REG))
lw_reloc_type = (int) BFD_RELOC_MIPS_CALL16;
relax_start (offset_expr.X_add_symbol);
used_at = 1;
}
}
- else if (mips_pic == SVR4_PIC && ! mips_big_got && HAVE_NEWABI)
+ else if (!mips_big_got && HAVE_NEWABI)
{
int add_breg_early = 0;
BFD_RELOC_MIPS_GOT_DISP, mips_gp_register);
}
}
- else if (mips_pic == SVR4_PIC && ! HAVE_NEWABI)
+ else if (mips_big_got && !HAVE_NEWABI)
{
int gpdelay;
int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16;
}
relax_end ();
}
- else if (mips_pic == SVR4_PIC && HAVE_NEWABI)
+ else if (mips_big_got && HAVE_NEWABI)
{
int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16;
int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16;
abort ();
if (breg != 0)
- {
- char *s;
-
- if (mips_pic == NO_PIC)
- s = (dbl || HAVE_64BIT_ADDRESSES) ? "daddu" : "addu";
- else
- s = ADDRESS_ADD_INSN;
-
- macro_build (NULL, s, "d,v,t", treg, tempreg, breg);
- }
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", treg, tempreg, breg);
break;
case M_J_A:
case M_JAL_2:
if (mips_pic == NO_PIC)
macro_build (NULL, "jalr", "d,s", dreg, sreg);
- else if (mips_pic == SVR4_PIC)
+ else
{
if (sreg != PIC_CALL_REG)
as_warn (_("MIPS PIC call to register other than $25"));
macro_build (NULL, "jalr", "d,s", dreg, sreg);
- if (! HAVE_NEWABI)
+ if (mips_pic == SVR4_PIC && !HAVE_NEWABI)
{
if (mips_cprestore_offset < 0)
as_warn (_("No .cprestore pseudo-op used in PIC code"));
}
}
}
- else
- abort ();
break;
}
}
}
+ else if (mips_pic == VXWORKS_PIC)
+ as_bad (_("Non-PIC jump used in PIC library"));
else
abort ();
case M_SCD_AB:
s = "scd";
goto st;
+ case M_CACHE_AB:
+ s = "cache";
+ goto st;
case M_SDC1_AB:
if (mips_opts.arch == CPU_R4650)
{
|| mask == M_L_DAB
|| mask == M_S_DAB)
fmt = "T,o(b)";
+ else if (mask == M_CACHE_AB)
+ fmt = "k,o(b)";
else if (coproc)
fmt = "E,o(b)";
else
fmt = "t,o(b)";
- /* Sign-extending 32-bit constants makes their handling easier.
- The HAVE_64BIT_GPRS... part is due to the linux kernel hack
- described below. */
- if ((! HAVE_64BIT_ADDRESSES
- && (! HAVE_64BIT_GPRS && offset_expr.X_op == O_constant))
- && (offset_expr.X_op == O_constant)
- && ! ((offset_expr.X_add_number & ~((bfd_vma) 0x7fffffff))
- == ~((bfd_vma) 0x7fffffff)))
- {
- if (offset_expr.X_add_number & ~((bfd_vma) 0xffffffff))
- as_bad (_("constant too large"));
-
- offset_expr.X_add_number = (((offset_expr.X_add_number & 0xffffffff)
- ^ 0x80000000) - 0x80000000);
- }
-
if (offset_expr.X_op != O_constant
&& offset_expr.X_op != O_symbol)
{
offset_expr.X_op = O_constant;
}
+ if (HAVE_32BIT_ADDRESSES
+ && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
+ {
+ char value [32];
+
+ sprintf_vma (value, offset_expr.X_add_number);
+ as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ }
+
/* A constant expression in PIC code can be handled just as it
is in non PIC code. */
- if (mips_pic == NO_PIC
- || offset_expr.X_op == O_constant)
+ if (offset_expr.X_op == O_constant)
+ {
+ expr1.X_add_number = ((offset_expr.X_add_number + 0x8000)
+ & ~(bfd_vma) 0xffff);
+ normalize_address_expr (&expr1);
+ load_register (tempreg, &expr1, HAVE_64BIT_ADDRESSES);
+ if (breg != 0)
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, tempreg, breg);
+ macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16, tempreg);
+ }
+ else if (mips_pic == NO_PIC)
{
/* If this is a reference to a GP relative symbol, and there
is no base register, we want
daddu $tempreg,$tempreg,$breg
<op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
- If we have 64-bit addresses, as an optimization, for
- addresses which are 32-bit constants (e.g. kseg0/kseg1
- addresses) we fall back to the 32-bit address generation
- mechanism since it is more efficient. Note that due to
- the signed offset used by memory operations, the 32-bit
- range is shifted down by 32768 here. This code should
- probably attempt to generate 64-bit constants more
- efficiently in general.
-
- As an extension for architectures with 64-bit registers,
- we don't truncate 64-bit addresses given as literal
- constants down to 32 bits, to support existing practice
- in the mips64 Linux (the kernel), that compiles source
- files with -mabi=64, assembling them as o32 or n32 (with
- -Wa,-32 or -Wa,-n32). This is not beautiful, but since
- the whole kernel is loaded into a memory region that is
- addressable with sign-extended 32-bit addresses, it is
- wasteful to compute the upper 32 bits of every
- non-literal address, that takes more space and time.
- Some day this should probably be implemented as an
- assembler option, such that the kernel doesn't have to
- use such ugly hacks, even though it will still have to
- end up converting the binary to ELF32 for a number of
- platforms whose boot loaders don't support ELF64
- binaries. */
- if ((HAVE_64BIT_ADDRESSES
- && ! (offset_expr.X_op == O_constant
- && IS_SEXT_32BIT_NUM (offset_expr.X_add_number + 0x8000)))
- || (HAVE_64BIT_GPRS
- && offset_expr.X_op == O_constant
- && ! IS_SEXT_32BIT_NUM (offset_expr.X_add_number + 0x8000)))
+ For GP relative symbols in 64bit address space we can use
+ the same sequence as in 32bit address space. */
+ if (HAVE_64BIT_SYMBOLS)
{
- /* ??? We don't provide a GP-relative alternative for
- these macros. It used not to be possible with the
- original relaxation code, but it could be done now. */
+ if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
+ {
+ relax_start (offset_expr.X_add_symbol);
+ if (breg == 0)
+ {
+ macro_build (&offset_expr, s, fmt, treg,
+ BFD_RELOC_GPREL16, mips_gp_register);
+ }
+ else
+ {
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
+ tempreg, breg, mips_gp_register);
+ macro_build (&offset_expr, s, fmt, treg,
+ BFD_RELOC_GPREL16, tempreg);
+ }
+ relax_switch ();
+ }
if (used_at == 0 && !mips_opts.noat)
{
macro_build (&offset_expr, s, fmt, treg,
BFD_RELOC_LO16, tempreg);
}
+
+ if (mips_relax.sequence)
+ relax_end ();
break;
}
- if (offset_expr.X_op == O_constant
- && ! IS_SEXT_32BIT_NUM (offset_expr.X_add_number + 0x8000))
- as_bad (_("load/store address overflow (max 32 bits)"));
-
if (breg == 0)
{
if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && ! nopic_need_relax (offset_expr.X_add_symbol, 1))
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
{
relax_start (offset_expr.X_add_symbol);
macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_GPREL16,
else
{
if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
- && ! nopic_need_relax (offset_expr.X_add_symbol, 1))
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
{
relax_start (offset_expr.X_add_symbol);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
relax_end ();
}
}
- else if (mips_pic == SVR4_PIC && ! mips_big_got)
+ else if (!mips_big_got)
{
int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
tempreg, tempreg, breg);
macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
}
- else if (mips_pic == SVR4_PIC && ! HAVE_NEWABI)
+ else if (mips_big_got && !HAVE_NEWABI)
{
int gpdelay;
tempreg, tempreg, breg);
macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
}
- else if (mips_pic == SVR4_PIC && HAVE_NEWABI)
+ else if (mips_big_got && HAVE_NEWABI)
{
/* If this is a reference to an external symbol, we want
lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
macro_build_lui (&offset_expr, AT);
used_at = 1;
}
- else if (mips_pic == SVR4_PIC)
+ else
{
macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
BFD_RELOC_MIPS_GOT16, mips_gp_register);
used_at = 1;
}
- else
- abort ();
/* Now we load the register(s). */
if (HAVE_64BIT_GPRS)
{
assert (strcmp (s, RDATA_SECTION_NAME) == 0);
used_at = 1;
- if (mips_pic == SVR4_PIC)
+ if (mips_pic != NO_PIC)
macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT,
BFD_RELOC_MIPS_GOT16, mips_gp_register);
else
offset_expr.X_op = O_constant;
}
+ if (HAVE_32BIT_ADDRESSES
+ && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
+ {
+ char value [32];
+
+ sprintf_vma (value, offset_expr.X_add_number);
+ as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ }
+
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when loading from memory. We set coproc if we must
load $fn+1 first. */
If there is a base register, we add it to $at after the
lui instruction. If there is a constant, we always use
the last case. */
- if ((valueT) offset_expr.X_add_number > MAX_GPREL_OFFSET
- || nopic_need_relax (offset_expr.X_add_symbol, 1))
- used_at = 1;
- else
+ if (offset_expr.X_op == O_symbol
+ && (valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET
+ && !nopic_need_relax (offset_expr.X_add_symbol, 1))
{
relax_start (offset_expr.X_add_symbol);
if (breg == 0)
if (mips_relax.sequence)
relax_end ();
}
- else if (mips_pic == SVR4_PIC && ! mips_big_got)
+ else if (!mips_big_got)
{
/* If this is a reference to an external symbol, we want
lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
mips_optimize = hold_mips_optimize;
}
- else if (mips_pic == SVR4_PIC)
+ else if (mips_big_got)
{
int gpdelay;
dbl = 1;
case M_MULO:
do_mulo:
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
used_at = 1;
if (imm)
load_register (AT, &imm_expr, dbl);
macro_build (NULL, "nop", "", 0);
macro_build (NULL, "break", "c", 6);
}
- --mips_opts.noreorder;
+ end_noreorder ();
macro_build (NULL, "mflo", "d", dreg);
break;
dbl = 1;
case M_MULOU:
do_mulou:
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
used_at = 1;
if (imm)
load_register (AT, &imm_expr, dbl);
macro_build (NULL, "nop", "", 0);
macro_build (NULL, "break", "c", 6);
}
- --mips_opts.noreorder;
+ end_noreorder ();
break;
case M_DROL:
* Is the double cfc1 instruction a bug in the mips assembler;
* or is there a reason for it?
*/
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
macro_build (NULL, "cfc1", "t,G", treg, RA);
macro_build (NULL, "cfc1", "t,G", treg, RA);
macro_build (NULL, "nop", "");
dreg, sreg);
macro_build (NULL, "ctc1", "t,G", treg, RA);
macro_build (NULL, "nop", "");
- --mips_opts.noreorder;
+ end_noreorder ();
break;
case M_ULH:
mask = ip->insn_mo->mask;
- xreg = (ip->insn_opcode >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX;
- yreg = (ip->insn_opcode >> MIPS16OP_SH_RY) & MIPS16OP_MASK_RY;
- zreg = (ip->insn_opcode >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ;
+ xreg = MIPS16_EXTRACT_OPERAND (RX, *ip);
+ yreg = MIPS16_EXTRACT_OPERAND (RY, *ip);
+ zreg = MIPS16_EXTRACT_OPERAND (RZ, *ip);
expr1.X_op = O_constant;
expr1.X_op_symbol = NULL;
case M_REM_3:
s = "mfhi";
do_div3:
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
macro_build (NULL, dbl ? "ddiv" : "div", "0,x,y", xreg, yreg);
expr1.X_add_number = 2;
macro_build (&expr1, "bnez", "x,p", yreg);
since that causes an overflow. We should do that as well,
but I don't see how to do the comparisons without a temporary
register. */
- --mips_opts.noreorder;
+ end_noreorder ();
macro_build (NULL, s, "x", zreg);
break;
s = "ddivu";
s2 = "mfhi";
do_divu3:
- mips_emit_delays (TRUE);
- ++mips_opts.noreorder;
- mips_any_noreorder = 1;
+ start_noreorder ();
macro_build (NULL, s, "0,x,y", xreg, yreg);
expr1.X_add_number = 2;
macro_build (&expr1, "bnez", "x,p", yreg);
macro_build (NULL, "break", "6", 7);
- --mips_opts.noreorder;
+ end_noreorder ();
macro_build (NULL, s2, "x", zreg);
break;
case '+':
switch (c = *p++)
{
+ case '1': USE_BITS (OP_MASK_UDI1, OP_SH_UDI1); break;
+ case '2': USE_BITS (OP_MASK_UDI2, OP_SH_UDI2); break;
+ case '3': USE_BITS (OP_MASK_UDI3, OP_SH_UDI3); break;
+ case '4': USE_BITS (OP_MASK_UDI4, OP_SH_UDI4); break;
case 'A': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
case 'B': USE_BITS (OP_MASK_INSMSB, OP_SH_INSMSB); break;
case 'C': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
case 'G': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
case 'H': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
case 'I': break;
+ case 't': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ case 'T': USE_BITS (OP_MASK_RT, OP_SH_RT);
+ USE_BITS (OP_MASK_SEL, OP_SH_SEL); break;
default:
as_bad (_("internal: bad mips opcode (unknown extension operand type `+%c'): %s %s"),
c, opc->name, opc->args);
case '%': USE_BITS (OP_MASK_VECALIGN, OP_SH_VECALIGN); break;
case '[': break;
case ']': break;
+ case '3': USE_BITS (OP_MASK_SA3, OP_SH_SA3); break;
+ case '4': USE_BITS (OP_MASK_SA4, OP_SH_SA4); break;
+ case '5': USE_BITS (OP_MASK_IMM8, OP_SH_IMM8); break;
+ case '6': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case '7': USE_BITS (OP_MASK_DSPACC, OP_SH_DSPACC); break;
+ case '8': USE_BITS (OP_MASK_WRDSP, OP_SH_WRDSP); break;
+ case '9': USE_BITS (OP_MASK_DSPACC_S, OP_SH_DSPACC_S);break;
+ case '0': USE_BITS (OP_MASK_DSPSFT, OP_SH_DSPSFT); break;
+ case '\'': USE_BITS (OP_MASK_RDDSP, OP_SH_RDDSP); break;
+ case ':': USE_BITS (OP_MASK_DSPSFT_7, OP_SH_DSPSFT_7);break;
+ case '@': USE_BITS (OP_MASK_IMM10, OP_SH_IMM10); break;
+ case '!': USE_BITS (OP_MASK_MT_U, OP_SH_MT_U); break;
+ case '$': USE_BITS (OP_MASK_MT_H, OP_SH_MT_H); break;
+ case '*': USE_BITS (OP_MASK_MTACC_T, OP_SH_MTACC_T); break;
+ case '&': USE_BITS (OP_MASK_MTACC_D, OP_SH_MTACC_D); break;
+ case 'g': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
default:
as_bad (_("internal: bad mips opcode (unknown operand type `%c'): %s %s"),
c, opc->name, opc->args);
return 1;
}
+/* UDI immediates. */
+struct mips_immed {
+ char type;
+ unsigned int shift;
+ unsigned long mask;
+ const char * desc;
+};
+
+static const struct mips_immed mips_immed[] = {
+ { '1', OP_SH_UDI1, OP_MASK_UDI1, 0},
+ { '2', OP_SH_UDI2, OP_MASK_UDI2, 0},
+ { '3', OP_SH_UDI3, OP_MASK_UDI3, 0},
+ { '4', OP_SH_UDI4, OP_MASK_UDI4, 0},
+ { 0,0,0,0 }
+};
+
+/* Check whether an odd floating-point register is allowed. */
+static int
+mips_oddfpreg_ok (const struct mips_opcode *insn, int argnum)
+{
+ const char *s = insn->name;
+
+ if (insn->pinfo == INSN_MACRO)
+ /* Let a macro pass, we'll catch it later when it is expanded. */
+ return 1;
+
+ if (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa))
+ {
+ /* Allow odd registers for single-precision ops. */
+ switch (insn->pinfo & (FP_S | FP_D))
+ {
+ case FP_S:
+ case 0:
+ return 1; /* both single precision - ok */
+ case FP_D:
+ return 0; /* both double precision - fail */
+ default:
+ break;
+ }
+
+ /* Cvt.w.x and cvt.x.w allow an odd register for a 'w' or 's' operand. */
+ s = strchr (insn->name, '.');
+ if (argnum == 2)
+ s = s != NULL ? strchr (s + 1, '.') : NULL;
+ return (s != NULL && (s[1] == 'w' || s[1] == 's'));
+ }
+
+ /* Single-precision coprocessor loads and moves are OK too. */
+ if ((insn->pinfo & FP_S)
+ && (insn->pinfo & (INSN_COPROC_MEMORY_DELAY | INSN_STORE_MEMORY
+ | INSN_LOAD_COPROC_DELAY | INSN_COPROC_MOVE_DELAY)))
+ return 1;
+
+ return 0;
+}
+
/* This routine assembles an instruction into its binary format. As a
side effect, it sets one of the global variables imm_reloc or
offset_reloc to the type of relocation to do if one of the operands
unsigned int limlo, limhi;
char *s_reset;
char save_c = 0;
+ offsetT min_range, max_range;
+ int argnum;
+ unsigned int rtype;
insn_error = NULL;
if (OPCODE_IS_MEMBER (insn,
(mips_opts.isa
+ /* We don't check for mips_opts.mips16 here since
+ we want to allow jalx if -mips16 was specified
+ on the command line. */
| (file_ase_mips16 ? INSN_MIPS16 : 0)
| (mips_opts.ase_mdmx ? INSN_MDMX : 0)
- | (mips_opts.ase_mips3d ? INSN_MIPS3D : 0)),
+ | (mips_opts.ase_dsp ? INSN_DSP : 0)
+ | (mips_opts.ase_mt ? INSN_MT : 0)
+ | (mips_opts.ase_mips3d ? INSN_MIPS3D : 0)
+ | (mips_opts.ase_smartmips ? INSN_SMARTMIPS : 0)),
mips_opts.arch))
ok = TRUE;
else
ok = FALSE;
}
- if (! ok)
- {
- if (insn + 1 < &mips_opcodes[NUMOPCODES]
- && strcmp (insn->name, insn[1].name) == 0)
- {
- ++insn;
+ if (! ok)
+ {
+ if (insn + 1 < &mips_opcodes[NUMOPCODES]
+ && strcmp (insn->name, insn[1].name) == 0)
+ {
+ ++insn;
+ continue;
+ }
+ else
+ {
+ if (!insn_error)
+ {
+ static char buf[100];
+ sprintf (buf,
+ _("opcode not supported on this processor: %s (%s)"),
+ mips_cpu_info_from_arch (mips_opts.arch)->name,
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ insn_error = buf;
+ }
+ if (save_c)
+ *(--s) = save_c;
+ return;
+ }
+ }
+
+ create_insn (ip, insn);
+ insn_error = NULL;
+ argnum = 1;
+ for (args = insn->args;; ++args)
+ {
+ int is_mdmx;
+
+ s += strspn (s, " \t");
+ is_mdmx = 0;
+ switch (*args)
+ {
+ case '\0': /* end of args */
+ if (*s == '\0')
+ return;
+ break;
+
+ case '3': /* dsp 3-bit unsigned immediate in bit 21 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_SA3)
+ {
+ as_warn (_("DSP immediate not in range 0..%d (%lu)"),
+ OP_MASK_SA3, (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_SA3;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_SA3;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '4': /* dsp 4-bit unsigned immediate in bit 21 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_SA4)
+ {
+ as_warn (_("DSP immediate not in range 0..%d (%lu)"),
+ OP_MASK_SA4, (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_SA4;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_SA4;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '5': /* dsp 8-bit unsigned immediate in bit 16 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_IMM8)
+ {
+ as_warn (_("DSP immediate not in range 0..%d (%lu)"),
+ OP_MASK_IMM8, (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_IMM8;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_IMM8;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '6': /* dsp 5-bit unsigned immediate in bit 21 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_RS)
+ {
+ as_warn (_("DSP immediate not in range 0..%d (%lu)"),
+ OP_MASK_RS, (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_RS;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_RS;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '7': /* four dsp accumulators in bits 11,12 */
+ if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
+ s[3] >= '0' && s[3] <= '3')
+ {
+ regno = s[3] - '0';
+ s += 4;
+ ip->insn_opcode |= regno << OP_SH_DSPACC;
+ continue;
+ }
+ else
+ as_bad (_("Invalid dsp acc register"));
+ break;
+
+ case '8': /* dsp 6-bit unsigned immediate in bit 11 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_WRDSP)
+ {
+ as_warn (_("DSP immediate not in range 0..%d (%lu)"),
+ OP_MASK_WRDSP,
+ (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_WRDSP;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_WRDSP;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '9': /* four dsp accumulators in bits 21,22 */
+ if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
+ s[3] >= '0' && s[3] <= '3')
+ {
+ regno = s[3] - '0';
+ s += 4;
+ ip->insn_opcode |= regno << OP_SH_DSPACC_S;
+ continue;
+ }
+ else
+ as_bad (_("Invalid dsp acc register"));
+ break;
+
+ case '0': /* dsp 6-bit signed immediate in bit 20 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ min_range = -((OP_MASK_DSPSFT + 1) >> 1);
+ max_range = ((OP_MASK_DSPSFT + 1) >> 1) - 1;
+ if (imm_expr.X_add_number < min_range ||
+ imm_expr.X_add_number > max_range)
+ {
+ as_warn (_("DSP immediate not in range %ld..%ld (%ld)"),
+ (long) min_range, (long) max_range,
+ (long) imm_expr.X_add_number);
+ }
+ imm_expr.X_add_number &= OP_MASK_DSPSFT;
+ ip->insn_opcode |= ((unsigned long) imm_expr.X_add_number
+ << OP_SH_DSPSFT);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '\'': /* dsp 6-bit unsigned immediate in bit 16 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_RDDSP)
+ {
+ as_warn (_("DSP immediate not in range 0..%d (%lu)"),
+ OP_MASK_RDDSP,
+ (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_RDDSP;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_RDDSP;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case ':': /* dsp 7-bit signed immediate in bit 19 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ min_range = -((OP_MASK_DSPSFT_7 + 1) >> 1);
+ max_range = ((OP_MASK_DSPSFT_7 + 1) >> 1) - 1;
+ if (imm_expr.X_add_number < min_range ||
+ imm_expr.X_add_number > max_range)
+ {
+ as_warn (_("DSP immediate not in range %ld..%ld (%ld)"),
+ (long) min_range, (long) max_range,
+ (long) imm_expr.X_add_number);
+ }
+ imm_expr.X_add_number &= OP_MASK_DSPSFT_7;
+ ip->insn_opcode |= ((unsigned long) imm_expr.X_add_number
+ << OP_SH_DSPSFT_7);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case '@': /* dsp 10-bit signed immediate in bit 16 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ min_range = -((OP_MASK_IMM10 + 1) >> 1);
+ max_range = ((OP_MASK_IMM10 + 1) >> 1) - 1;
+ if (imm_expr.X_add_number < min_range ||
+ imm_expr.X_add_number > max_range)
+ {
+ as_warn (_("DSP immediate not in range %ld..%ld (%ld)"),
+ (long) min_range, (long) max_range,
+ (long) imm_expr.X_add_number);
+ }
+ imm_expr.X_add_number &= OP_MASK_IMM10;
+ ip->insn_opcode |= ((unsigned long) imm_expr.X_add_number
+ << OP_SH_IMM10);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
continue;
- }
- else
- {
- if (!insn_error)
+
+ case '!': /* mt 1-bit unsigned immediate in bit 5 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_MT_U)
{
- static char buf[100];
- sprintf (buf,
- _("opcode not supported on this processor: %s (%s)"),
- mips_cpu_info_from_arch (mips_opts.arch)->name,
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- insn_error = buf;
+ as_warn (_("MT immediate not in range 0..%d (%lu)"),
+ OP_MASK_MT_U, (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_MT_U;
}
- if (save_c)
- *(--s) = save_c;
- return;
- }
- }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_MT_U;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
- ip->insn_mo = insn;
- ip->insn_opcode = insn->match;
- insn_error = NULL;
- for (args = insn->args;; ++args)
- {
- int is_mdmx;
+ case '$': /* mt 1-bit unsigned immediate in bit 4 */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number & ~OP_MASK_MT_H)
+ {
+ as_warn (_("MT immediate not in range 0..%d (%lu)"),
+ OP_MASK_MT_H, (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= OP_MASK_MT_H;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_MT_H;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
- s += strspn (s, " \t");
- is_mdmx = 0;
- switch (*args)
- {
- case '\0': /* end of args */
- if (*s == '\0')
- return;
+ case '*': /* four dsp accumulators in bits 18,19 */
+ if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
+ s[3] >= '0' && s[3] <= '3')
+ {
+ regno = s[3] - '0';
+ s += 4;
+ ip->insn_opcode |= regno << OP_SH_MTACC_T;
+ continue;
+ }
+ else
+ as_bad (_("Invalid dsp/smartmips acc register"));
+ break;
+
+ case '&': /* four dsp accumulators in bits 13,14 */
+ if (s[0] == '$' && s[1] == 'a' && s[2] == 'c' &&
+ s[3] >= '0' && s[3] <= '3')
+ {
+ regno = s[3] - '0';
+ s += 4;
+ ip->insn_opcode |= regno << OP_SH_MTACC_D;
+ continue;
+ }
+ else
+ as_bad (_("Invalid dsp/smartmips acc register"));
break;
case ',':
{
case 'r':
case 'v':
- ip->insn_opcode |= lastregno << OP_SH_RS;
+ INSERT_OPERAND (RS, *ip, lastregno);
continue;
case 'w':
- ip->insn_opcode |= lastregno << OP_SH_RT;
+ INSERT_OPERAND (RT, *ip, lastregno);
continue;
case 'W':
- ip->insn_opcode |= lastregno << OP_SH_FT;
+ INSERT_OPERAND (FT, *ip, lastregno);
continue;
case 'V':
- ip->insn_opcode |= lastregno << OP_SH_FS;
+ INSERT_OPERAND (FS, *ip, lastregno);
continue;
}
break;
case '+': /* Opcode extension character. */
switch (*++args)
{
+ case '1': /* UDI immediates. */
+ case '2':
+ case '3':
+ case '4':
+ {
+ const struct mips_immed *imm = mips_immed;
+
+ while (imm->type && imm->type != *args)
+ ++imm;
+ if (! imm->type)
+ internalError ();
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number & ~imm->mask)
+ {
+ as_warn (_("Illegal %s number (%lu, 0x%lx)"),
+ imm->desc ? imm->desc : ip->insn_mo->name,
+ (unsigned long) imm_expr.X_add_number,
+ (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= imm->mask;
+ }
+ ip->insn_opcode |= ((unsigned long) imm_expr.X_add_number
+ << imm->shift);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ }
+ continue;
+
case 'A': /* ins/ext position, becomes LSB. */
limlo = 0;
limhi = 31;
imm_expr.X_add_number = limlo;
}
lastpos = imm_expr.X_add_number;
- ip->insn_opcode |= (imm_expr.X_add_number
- & OP_MASK_SHAMT) << OP_SH_SHAMT;
+ INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
(unsigned long) lastpos);
imm_expr.X_add_number = limlo - lastpos;
}
- ip->insn_opcode |= ((lastpos + imm_expr.X_add_number - 1)
- & OP_MASK_INSMSB) << OP_SH_INSMSB;
+ INSERT_OPERAND (INSMSB, *ip,
+ lastpos + imm_expr.X_add_number - 1);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
(unsigned long) lastpos);
imm_expr.X_add_number = limlo - lastpos;
}
- ip->insn_opcode |= ((imm_expr.X_add_number - 1)
- & OP_MASK_EXTMSBD) << OP_SH_EXTMSBD;
+ INSERT_OPERAND (EXTMSBD, *ip, imm_expr.X_add_number - 1);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
if (imm2_expr.X_op != O_big
&& imm2_expr.X_op != O_constant)
insn_error = _("absolute expression required");
- normalize_constant_expr (&imm2_expr);
+ if (HAVE_32BIT_GPRS)
+ normalize_constant_expr (&imm2_expr);
s = expr_end;
continue;
+ case 'T': /* Coprocessor register. */
+ /* +T is for disassembly only; never match. */
+ break;
+
+ case 't': /* Coprocessor register number. */
+ if (s[0] == '$' && ISDIGIT (s[1]))
+ {
+ ++s;
+ regno = 0;
+ do
+ {
+ regno *= 10;
+ regno += *s - '0';
+ ++s;
+ }
+ while (ISDIGIT (*s));
+ if (regno > 31)
+ as_bad (_("Invalid register number (%d)"), regno);
+ else
+ {
+ ip->insn_opcode |= regno << OP_SH_RT;
+ continue;
+ }
+ }
+ else
+ as_bad (_("Invalid coprocessor 0 register number"));
+ break;
+
default:
as_bad (_("internal: bad mips opcode (unknown extension operand type `+%c'): %s %s"),
*args, insn->name, insn->args);
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
- {
- as_warn (_("Improper shift amount (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_SHAMT;
- }
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_SHAMT;
+ as_warn (_("Improper shift amount (%lu)"),
+ (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
if ((unsigned long) imm_expr.X_add_number < 32
|| (unsigned long) imm_expr.X_add_number > 63)
break;
- ip->insn_opcode |= (imm_expr.X_add_number - 32) << OP_SH_SHAMT;
+ INSERT_OPERAND (SHAMT, *ip, imm_expr.X_add_number - 32);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
- {
- as_warn (_("Invalid value for `%s' (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= 0x1f;
- }
+ as_warn (_("Invalid value for `%s' (%lu)"),
+ ip->insn_mo->name,
+ (unsigned long) imm_expr.X_add_number);
if (*args == 'k')
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_CACHE;
+ INSERT_OPERAND (CACHE, *ip, imm_expr.X_add_number);
else
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_PREFX;
+ INSERT_OPERAND (PREFX, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 1023)
- {
- as_warn (_("Illegal break code (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_CODE;
- }
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_CODE;
+ as_warn (_("Illegal break code (%lu)"),
+ (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (CODE, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 1023)
- {
- as_warn (_("Illegal lower break code (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_CODE2;
- }
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_CODE2;
+ as_warn (_("Illegal lower break code (%lu)"),
+ (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (CODE2, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
if ((unsigned long) imm_expr.X_add_number > OP_MASK_CODE20)
as_warn (_("Illegal 20-bit code (%lu)"),
(unsigned long) imm_expr.X_add_number);
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_CODE20;
+ INSERT_OPERAND (CODE20, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
if ((unsigned long) imm_expr.X_add_number > OP_MASK_CODE19)
as_warn (_("Illegal 19-bit code (%lu)"),
(unsigned long) imm_expr.X_add_number);
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_CODE19;
+ INSERT_OPERAND (CODE19, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
- case 'P': /* Performance register */
+ case 'P': /* Performance register. */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if (imm_expr.X_add_number != 0 && imm_expr.X_add_number != 1)
- {
- as_warn (_("Invalid performance register (%lu)"),
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_PERFREG;
- }
- ip->insn_opcode |= (imm_expr.X_add_number << OP_SH_PERFREG);
+ as_warn (_("Invalid performance register (%lu)"),
+ (unsigned long) imm_expr.X_add_number);
+ INSERT_OPERAND (PERFREG, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
+ case 'G': /* Coprocessor destination register. */
+ if (((ip->insn_opcode >> OP_SH_OP) & OP_MASK_OP) == OP_OP_COP0)
+ ok = reg_lookup (&s, RTYPE_NUM | RTYPE_CP0, ®no);
+ else
+ ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no);
+ ip->insn_opcode |= regno << OP_SH_RD;
+ if (ok)
+ {
+ lastregno = regno;
+ continue;
+ }
+ else
+ break;
+
case 'b': /* base register */
case 'd': /* destination register */
case 's': /* source register */
case 'v': /* both dest and source */
case 'w': /* both dest and target */
case 'E': /* coprocessor target register */
- case 'G': /* coprocessor destination register */
case 'K': /* 'rdhwr' destination register */
case 'x': /* ignore register name */
case 'z': /* must be zero register */
case 'U': /* destination register (clo/clz). */
- s_reset = s;
- if (s[0] == '$')
+ case 'g': /* coprocessor destination register */
+ s_reset = s;
+ if (*args == 'E' || *args == 'K')
+ ok = reg_lookup (&s, RTYPE_NUM, ®no);
+ else
+ {
+ ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no);
+ if (regno == AT && ! mips_opts.noat)
+ as_warn ("Used $at without \".set noat\"");
+ }
+ if (ok)
{
-
- if (ISDIGIT (s[1]))
- {
- ++s;
- regno = 0;
- do
- {
- regno *= 10;
- regno += *s - '0';
- ++s;
- }
- while (ISDIGIT (*s));
- if (regno > 31)
- as_bad (_("Invalid register number (%d)"), regno);
- }
- else if (*args == 'E' || *args == 'G' || *args == 'K')
- goto notreg;
- else
- {
- if (s[1] == 'r' && s[2] == 'a')
- {
- s += 3;
- regno = RA;
- }
- else if (s[1] == 'f' && s[2] == 'p')
- {
- s += 3;
- regno = FP;
- }
- else if (s[1] == 's' && s[2] == 'p')
- {
- s += 3;
- regno = SP;
- }
- else if (s[1] == 'g' && s[2] == 'p')
- {
- s += 3;
- regno = GP;
- }
- else if (s[1] == 'a' && s[2] == 't')
- {
- s += 3;
- regno = AT;
- }
- else if (s[1] == 'k' && s[2] == 't' && s[3] == '0')
- {
- s += 4;
- regno = KT0;
- }
- else if (s[1] == 'k' && s[2] == 't' && s[3] == '1')
- {
- s += 4;
- regno = KT1;
- }
- else if (s[1] == 'z' && s[2] == 'e' && s[3] == 'r' && s[4] == 'o')
- {
- s += 5;
- regno = ZERO;
- }
- else if (itbl_have_entries)
- {
- char *p, *n;
- unsigned long r;
-
- p = s + 1; /* advance past '$' */
- n = itbl_get_field (&p); /* n is name */
-
- /* See if this is a register defined in an
- itbl entry. */
- if (itbl_get_reg_val (n, &r))
- {
- /* Get_field advances to the start of
- the next field, so we need to back
- rack to the end of the last field. */
- if (p)
- s = p - 1;
- else
- s = strchr (s, '\0');
- regno = r;
- }
- else
- goto notreg;
- }
- else
- goto notreg;
- }
- if (regno == AT
- && ! mips_opts.noat
- && *args != 'E'
- && *args != 'G'
- && *args != 'K')
- as_warn (_("Used $at without \".set noat\""));
c = *args;
if (*s == ' ')
++s;
case 's':
case 'v':
case 'b':
- ip->insn_opcode |= regno << OP_SH_RS;
+ INSERT_OPERAND (RS, *ip, regno);
break;
case 'd':
case 'G':
case 'K':
- ip->insn_opcode |= regno << OP_SH_RD;
+ case 'g':
+ INSERT_OPERAND (RD, *ip, regno);
break;
case 'U':
- ip->insn_opcode |= regno << OP_SH_RD;
- ip->insn_opcode |= regno << OP_SH_RT;
+ INSERT_OPERAND (RD, *ip, regno);
+ INSERT_OPERAND (RT, *ip, regno);
break;
case 'w':
case 't':
case 'E':
- ip->insn_opcode |= regno << OP_SH_RT;
+ INSERT_OPERAND (RT, *ip, regno);
break;
case 'x':
/* This case exists because on the r3000 trunc
lastregno = regno;
continue;
}
- notreg:
switch (*args++)
{
case 'r':
case 'v':
- ip->insn_opcode |= lastregno << OP_SH_RS;
+ INSERT_OPERAND (RS, *ip, lastregno);
continue;
case 'w':
- ip->insn_opcode |= lastregno << OP_SH_RT;
+ INSERT_OPERAND (RT, *ip, lastregno);
continue;
}
break;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > OP_MASK_ALN)
- {
- as_warn ("Improper align amount (%ld), using low bits",
- (long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_ALN;
- }
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_ALN;
+ as_warn ("Improper align amount (%ld), using low bits",
+ (long) imm_expr.X_add_number);
+ INSERT_OPERAND (ALN, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > OP_MASK_FT)
- {
- as_warn (_("Invalid MDMX Immediate (%ld)"),
- (long) imm_expr.X_add_number);
- imm_expr.X_add_number &= OP_MASK_FT;
- }
- imm_expr.X_add_number &= OP_MASK_FT;
+ as_warn (_("Invalid MDMX Immediate (%ld)"),
+ (long) imm_expr.X_add_number);
+ INSERT_OPERAND (FT, *ip, imm_expr.X_add_number);
if (ip->insn_opcode & (OP_MASK_VSEL << OP_SH_VSEL))
ip->insn_opcode |= MDMX_FMTSEL_IMM_QH << OP_SH_VSEL;
else
ip->insn_opcode |= MDMX_FMTSEL_IMM_OB << OP_SH_VSEL;
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_FT;
imm_expr.X_op = O_absent;
s = expr_end;
continue;
case 'R': /* floating point source register */
case 'V':
case 'W':
+ rtype = RTYPE_FPU;
+ if (is_mdmx
+ || (mips_opts.ase_mdmx
+ && (ip->insn_mo->pinfo & FP_D)
+ && (ip->insn_mo->pinfo & (INSN_COPROC_MOVE_DELAY
+ | INSN_COPROC_MEMORY_DELAY
+ | INSN_LOAD_COPROC_DELAY
+ | INSN_LOAD_MEMORY_DELAY
+ | INSN_STORE_MEMORY))))
+ rtype |= RTYPE_VEC;
s_reset = s;
- /* Accept $fN for FP and MDMX register numbers, and in
- addition accept $vN for MDMX register numbers. */
- if ((s[0] == '$' && s[1] == 'f' && ISDIGIT (s[2]))
- || (is_mdmx != 0 && s[0] == '$' && s[1] == 'v'
- && ISDIGIT (s[2])))
+ if (reg_lookup (&s, rtype, ®no))
{
- s += 2;
- regno = 0;
- do
- {
- regno *= 10;
- regno += *s - '0';
- ++s;
- }
- while (ISDIGIT (*s));
-
- if (regno > 31)
- as_bad (_("Invalid float register number (%d)"), regno);
-
if ((regno & 1) != 0
&& HAVE_32BIT_FPRS
- && ! (strcmp (str, "mtc1") == 0
- || strcmp (str, "mfc1") == 0
- || strcmp (str, "lwc1") == 0
- || strcmp (str, "swc1") == 0
- || strcmp (str, "l.s") == 0
- || strcmp (str, "s.s") == 0))
+ && ! mips_oddfpreg_ok (ip->insn_mo, argnum))
as_warn (_("Float register should be even, was %d"),
regno);
{
case 'D':
case 'X':
- ip->insn_opcode |= regno << OP_SH_FD;
+ INSERT_OPERAND (FD, *ip, regno);
break;
case 'V':
case 'S':
case 'Y':
- ip->insn_opcode |= regno << OP_SH_FS;
+ INSERT_OPERAND (FS, *ip, regno);
break;
case 'Q':
/* This is like 'Z', but also needs to fix the MDMX
case 'W':
case 'T':
case 'Z':
- ip->insn_opcode |= regno << OP_SH_FT;
+ INSERT_OPERAND (FT, *ip, regno);
break;
case 'R':
- ip->insn_opcode |= regno << OP_SH_FR;
+ INSERT_OPERAND (FR, *ip, regno);
break;
}
lastregno = regno;
switch (*args++)
{
case 'V':
- ip->insn_opcode |= lastregno << OP_SH_FS;
+ INSERT_OPERAND (FS, *ip, lastregno);
continue;
case 'W':
- ip->insn_opcode |= lastregno << OP_SH_FT;
+ INSERT_OPERAND (FT, *ip, lastregno);
continue;
}
break;
if (imm_expr.X_op != O_big
&& imm_expr.X_op != O_constant)
insn_error = _("absolute expression required");
- normalize_constant_expr (&imm_expr);
+ if (HAVE_32BIT_GPRS)
+ normalize_constant_expr (&imm_expr);
s = expr_end;
continue;
case 'A':
my_getExpression (&offset_expr, s);
+ normalize_address_expr (&offset_expr);
*imm_reloc = BFD_RELOC_32;
s = expr_end;
continue;
case 'N': /* 3 bit branch condition code */
case 'M': /* 3 bit compare condition code */
- if (strncmp (s, "$fcc", 4) != 0)
+ rtype = RTYPE_CCC;
+ if (ip->insn_mo->pinfo & (FP_D| FP_S))
+ rtype |= RTYPE_FCC;
+ if (!reg_lookup (&s, rtype, ®no))
break;
- s += 4;
- regno = 0;
- do
- {
- regno *= 10;
- regno += *s - '0';
- ++s;
- }
- while (ISDIGIT (*s));
- if (regno > 7)
- as_bad (_("Invalid condition code register $fcc%d"), regno);
if ((strcmp(str + strlen(str) - 3, ".ps") == 0
|| strcmp(str + strlen(str) - 5, "any2f") == 0
|| strcmp(str + strlen(str) - 5, "any2t") == 0)
as_warn(_("Condition code register should be 0 or 4 for %s, was %d"),
str, regno);
if (*args == 'N')
- ip->insn_opcode |= regno << OP_SH_BCC;
+ INSERT_OPERAND (BCC, *ip, regno);
else
- ip->insn_opcode |= regno << OP_SH_CCC;
+ INSERT_OPERAND (CCC, *ip, regno);
continue;
case 'H':
imm_expr.X_add_number = 0;
}
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_VECBYTE;
+ INSERT_OPERAND (VECBYTE, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
imm_expr.X_add_number = 0;
}
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_VECALIGN;
+ INSERT_OPERAND (VECALIGN, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
}
}
+#define SKIP_SPACE_TABS(S) { while (*(S) == ' ' || *(S) == '\t') ++(S); }
+
/* This routine assembles an instruction into its binary format when
assembling for the mips16. As a side effect, it sets one of the
global variables imm_reloc or offset_reloc to the type of
argsstart = s;
for (;;)
{
+ bfd_boolean ok;
+
assert (strcmp (insn->name, str) == 0);
- ip->insn_mo = insn;
- ip->insn_opcode = insn->match;
- ip->use_extend = FALSE;
+ if (OPCODE_IS_MEMBER (insn, mips_opts.isa, mips_opts.arch))
+ ok = TRUE;
+ else
+ ok = FALSE;
+
+ if (! ok)
+ {
+ if (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes]
+ && strcmp (insn->name, insn[1].name) == 0)
+ {
+ ++insn;
+ continue;
+ }
+ else
+ {
+ if (!insn_error)
+ {
+ static char buf[100];
+ sprintf (buf,
+ _("opcode not supported on this processor: %s (%s)"),
+ mips_cpu_info_from_arch (mips_opts.arch)->name,
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ insn_error = buf;
+ }
+ return;
+ }
+ }
+
+ create_insn (ip, insn);
imm_expr.X_op = O_absent;
imm_reloc[0] = BFD_RELOC_UNUSED;
imm_reloc[1] = BFD_RELOC_UNUSED;
switch (*++args)
{
case 'v':
- ip->insn_opcode |= lastregno << MIPS16OP_SH_RX;
+ MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
continue;
case 'w':
- ip->insn_opcode |= lastregno << MIPS16OP_SH_RY;
+ MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
continue;
}
break;
if (s[0] != '$')
{
if (c == 'v')
- ip->insn_opcode |= lastregno << MIPS16OP_SH_RX;
+ MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
else
- ip->insn_opcode |= lastregno << MIPS16OP_SH_RY;
+ MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
++args;
continue;
}
case 'R':
case 'X':
case 'Y':
- if (s[0] != '$')
- break;
- s_reset = s;
- if (ISDIGIT (s[1]))
+ s_reset = s;
+ if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no))
{
- ++s;
- regno = 0;
- do
- {
- regno *= 10;
- regno += *s - '0';
- ++s;
- }
- while (ISDIGIT (*s));
- if (regno > 31)
- {
- as_bad (_("invalid register number (%d)"), regno);
- regno = 2;
- }
- }
- else
- {
- if (s[1] == 'r' && s[2] == 'a')
- {
- s += 3;
- regno = RA;
- }
- else if (s[1] == 'f' && s[2] == 'p')
- {
- s += 3;
- regno = FP;
- }
- else if (s[1] == 's' && s[2] == 'p')
- {
- s += 3;
- regno = SP;
- }
- else if (s[1] == 'g' && s[2] == 'p')
- {
- s += 3;
- regno = GP;
- }
- else if (s[1] == 'a' && s[2] == 't')
- {
- s += 3;
- regno = AT;
- }
- else if (s[1] == 'k' && s[2] == 't' && s[3] == '0')
- {
- s += 4;
- regno = KT0;
- }
- else if (s[1] == 'k' && s[2] == 't' && s[3] == '1')
- {
- s += 4;
- regno = KT1;
- }
- else if (s[1] == 'z' && s[2] == 'e' && s[3] == 'r' && s[4] == 'o')
+ if (c == 'v' || c == 'w')
{
- s += 5;
- regno = ZERO;
+ if (c == 'v')
+ ip->insn_opcode |= lastregno << MIPS16OP_SH_RX;
+ else
+ ip->insn_opcode |= lastregno << MIPS16OP_SH_RY;
+ ++args;
+ continue;
}
- else
- break;
+ break;
}
if (*s == ' ')
{
case 'x':
case 'v':
- ip->insn_opcode |= regno << MIPS16OP_SH_RX;
+ MIPS16_INSERT_OPERAND (RX, *ip, regno);
break;
case 'y':
case 'w':
- ip->insn_opcode |= regno << MIPS16OP_SH_RY;
+ MIPS16_INSERT_OPERAND (RY, *ip, regno);
break;
case 'z':
- ip->insn_opcode |= regno << MIPS16OP_SH_RZ;
+ MIPS16_INSERT_OPERAND (RZ, *ip, regno);
break;
case 'Z':
- ip->insn_opcode |= regno << MIPS16OP_SH_MOVE32Z;
+ MIPS16_INSERT_OPERAND (MOVE32Z, *ip, regno);
case '0':
case 'S':
case 'R':
break;
case 'X':
- ip->insn_opcode |= regno << MIPS16OP_SH_REGR32;
+ MIPS16_INSERT_OPERAND (REGR32, *ip, regno);
break;
case 'Y':
regno = ((regno & 7) << 2) | ((regno & 0x18) >> 3);
- ip->insn_opcode |= regno << MIPS16OP_SH_REG32R;
+ MIPS16_INSERT_OPERAND (REG32R, *ip, regno);
break;
default:
internalError ();
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 63)
- {
- as_warn (_("Invalid value for `%s' (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= 0x3f;
- }
- ip->insn_opcode |= imm_expr.X_add_number << MIPS16OP_SH_IMM6;
+ as_warn (_("Invalid value for `%s' (%lu)"),
+ ip->insn_mo->name,
+ (unsigned long) imm_expr.X_add_number);
+ MIPS16_INSERT_OPERAND (IMM6, *ip, imm_expr.X_add_number);
imm_expr.X_op = O_absent;
s = expr_end;
continue;
mask = 7 << 3;
while (*s != '\0')
{
- int freg, reg1, reg2;
+ unsigned int freg, reg1, reg2;
while (*s == ' ' || *s == ',')
++s;
- if (*s != '$')
- {
- as_bad (_("can't parse register list"));
- break;
- }
- ++s;
- if (*s != 'f')
+ if (reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®1))
freg = 0;
+ else if (reg_lookup (&s, RTYPE_FPU, ®1))
+ freg = 1;
else
{
- freg = 1;
- ++s;
- }
- reg1 = 0;
- while (ISDIGIT (*s))
- {
- reg1 *= 10;
- reg1 += *s - '0';
- ++s;
+ as_bad (_("can't parse register list"));
+ break;
}
if (*s == ' ')
++s;
else
{
++s;
- if (*s != '$')
- break;
- ++s;
- if (freg)
- {
- if (*s == 'f')
- ++s;
- else
- {
- as_bad (_("invalid register list"));
- break;
- }
- }
- reg2 = 0;
- while (ISDIGIT (*s))
+ if (!reg_lookup (&s, freg ? RTYPE_FPU
+ : (RTYPE_GP | RTYPE_NUM), ®2))
{
- reg2 *= 10;
- reg2 += *s - '0';
- ++s;
+ as_bad (_("invalid register list"));
+ break;
}
}
if (freg && reg1 == 0 && reg2 == 0 && c == 'L')
}
continue;
+ case 'm': /* Register list for save insn. */
+ case 'M': /* Register list for restore insn. */
+ {
+ int opcode = 0;
+ int framesz = 0, seen_framesz = 0;
+ int args = 0, statics = 0, sregs = 0;
+
+ while (*s != '\0')
+ {
+ unsigned int reg1, reg2;
+
+ SKIP_SPACE_TABS (s);
+ while (*s == ',')
+ ++s;
+ SKIP_SPACE_TABS (s);
+
+ my_getExpression (&imm_expr, s);
+ if (imm_expr.X_op == O_constant)
+ {
+ /* Handle the frame size. */
+ if (seen_framesz)
+ {
+ as_bad (_("more than one frame size in list"));
+ break;
+ }
+ seen_framesz = 1;
+ framesz = imm_expr.X_add_number;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+ }
+
+ if (! reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®1))
+ {
+ as_bad (_("can't parse register list"));
+ break;
+ }
+
+ while (*s == ' ')
+ ++s;
+
+ if (*s != '-')
+ reg2 = reg1;
+ else
+ {
+ ++s;
+ if (! reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®2)
+ || reg2 < reg1)
+ {
+ as_bad (_("can't parse register list"));
+ break;
+ }
+ }
+
+ while (reg1 <= reg2)
+ {
+ if (reg1 >= 4 && reg1 <= 7)
+ {
+ if (c == 'm' && !seen_framesz)
+ /* args $a0-$a3 */
+ args |= 1 << (reg1 - 4);
+ else
+ /* statics $a0-$a3 */
+ statics |= 1 << (reg1 - 4);
+ }
+ else if ((reg1 >= 16 && reg1 <= 23) || reg1 == 30)
+ {
+ /* $s0-$s8 */
+ sregs |= 1 << ((reg1 == 30) ? 8 : (reg1 - 16));
+ }
+ else if (reg1 == 31)
+ {
+ /* Add $ra to insn. */
+ opcode |= 0x40;
+ }
+ else
+ {
+ as_bad (_("unexpected register in list"));
+ break;
+ }
+ if (++reg1 == 24)
+ reg1 = 30;
+ }
+ }
+
+ /* Encode args/statics combination. */
+ if (args & statics)
+ as_bad (_("arg/static registers overlap"));
+ else if (args == 0xf)
+ /* All $a0-$a3 are args. */
+ opcode |= MIPS16_ALL_ARGS << 16;
+ else if (statics == 0xf)
+ /* All $a0-$a3 are statics. */
+ opcode |= MIPS16_ALL_STATICS << 16;
+ else
+ {
+ int narg = 0, nstat = 0;
+
+ /* Count arg registers. */
+ while (args & 0x1)
+ {
+ args >>= 1;
+ narg++;
+ }
+ if (args != 0)
+ as_bad (_("invalid arg register list"));
+
+ /* Count static registers. */
+ while (statics & 0x8)
+ {
+ statics = (statics << 1) & 0xf;
+ nstat++;
+ }
+ if (statics != 0)
+ as_bad (_("invalid static register list"));
+
+ /* Encode args/statics. */
+ opcode |= ((narg << 2) | nstat) << 16;
+ }
+
+ /* Encode $s0/$s1. */
+ if (sregs & (1 << 0)) /* $s0 */
+ opcode |= 0x20;
+ if (sregs & (1 << 1)) /* $s1 */
+ opcode |= 0x10;
+ sregs >>= 2;
+
+ if (sregs != 0)
+ {
+ /* Count regs $s2-$s8. */
+ int nsreg = 0;
+ while (sregs & 1)
+ {
+ sregs >>= 1;
+ nsreg++;
+ }
+ if (sregs != 0)
+ as_bad (_("invalid static register list"));
+ /* Encode $s2-$s8. */
+ opcode |= nsreg << 24;
+ }
+
+ /* Encode frame size. */
+ if (!seen_framesz)
+ as_bad (_("missing frame size"));
+ else if ((framesz & 7) != 0 || framesz < 0
+ || framesz > 0xff * 8)
+ as_bad (_("invalid frame size"));
+ else if (framesz != 128 || (opcode >> 16) != 0)
+ {
+ framesz /= 8;
+ opcode |= (((framesz & 0xf0) << 16)
+ | (framesz & 0x0f));
+ }
+
+ /* Finally build the instruction. */
+ if ((opcode >> 16) != 0 || framesz == 0)
+ {
+ ip->use_extend = TRUE;
+ ip->extend = opcode >> 16;
+ }
+ ip->insn_opcode |= opcode & 0x7f;
+ }
+ continue;
+
case 'e': /* extend code */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
{"%highest", BFD_RELOC_MIPS_HIGHEST},
{"%higher", BFD_RELOC_MIPS_HIGHER},
{"%neg", BFD_RELOC_MIPS_SUB},
+ {"%tlsgd", BFD_RELOC_MIPS_TLS_GD},
+ {"%tlsldm", BFD_RELOC_MIPS_TLS_LDM},
+ {"%dtprel_hi", BFD_RELOC_MIPS_TLS_DTPREL_HI16},
+ {"%dtprel_lo", BFD_RELOC_MIPS_TLS_DTPREL_LO16},
+ {"%tprel_hi", BFD_RELOC_MIPS_TLS_TPREL_HI16},
+ {"%tprel_lo", BFD_RELOC_MIPS_TLS_TPREL_LO16},
+ {"%gottprel", BFD_RELOC_MIPS_TLS_GOTTPREL},
#endif
{"%hi", BFD_RELOC_HI16_S}
};
for (i = 0; i < limit; i++)
if (strncasecmp (*str, percent_op[i].str, strlen (percent_op[i].str)) == 0)
{
+ int len = strlen (percent_op[i].str);
+
+ if (!ISSPACE ((*str)[len]) && (*str)[len] != '(')
+ continue;
+
*str += strlen (percent_op[i].str);
*reloc = percent_op[i].reloc;
{"mdmx", no_argument, NULL, OPTION_MDMX},
#define OPTION_NO_MDMX (OPTION_ASE_BASE + 5)
{"no-mdmx", no_argument, NULL, OPTION_NO_MDMX},
+#define OPTION_DSP (OPTION_ASE_BASE + 6)
+ {"mdsp", no_argument, NULL, OPTION_DSP},
+#define OPTION_NO_DSP (OPTION_ASE_BASE + 7)
+ {"mno-dsp", no_argument, NULL, OPTION_NO_DSP},
+#define OPTION_MT (OPTION_ASE_BASE + 8)
+ {"mmt", no_argument, NULL, OPTION_MT},
+#define OPTION_NO_MT (OPTION_ASE_BASE + 9)
+ {"mno-mt", no_argument, NULL, OPTION_NO_MT},
+#define OPTION_SMARTMIPS (OPTION_ASE_BASE + 10)
+ {"msmartmips", no_argument, NULL, OPTION_SMARTMIPS},
+#define OPTION_NO_SMARTMIPS (OPTION_ASE_BASE + 11)
+ {"mno-smartmips", no_argument, NULL, OPTION_NO_SMARTMIPS},
/* Old-style architecture options. Don't add more of these. */
-#define OPTION_COMPAT_ARCH_BASE (OPTION_ASE_BASE + 6)
+#define OPTION_COMPAT_ARCH_BASE (OPTION_ASE_BASE + 12)
#define OPTION_M4650 (OPTION_COMPAT_ARCH_BASE + 0)
{"m4650", no_argument, NULL, OPTION_M4650},
#define OPTION_NO_M4650 (OPTION_COMPAT_ARCH_BASE + 1)
#define OPTION_NO_FIX_VR4120 (OPTION_FIX_BASE + 3)
{"mfix-vr4120", no_argument, NULL, OPTION_FIX_VR4120},
{"mno-fix-vr4120", no_argument, NULL, OPTION_NO_FIX_VR4120},
+#define OPTION_FIX_VR4130 (OPTION_FIX_BASE + 4)
+#define OPTION_NO_FIX_VR4130 (OPTION_FIX_BASE + 5)
+ {"mfix-vr4130", no_argument, NULL, OPTION_FIX_VR4130},
+ {"mno-fix-vr4130", no_argument, NULL, OPTION_NO_FIX_VR4130},
/* Miscellaneous options. */
-#define OPTION_MISC_BASE (OPTION_FIX_BASE + 4)
+#define OPTION_MISC_BASE (OPTION_FIX_BASE + 6)
#define OPTION_TRAP (OPTION_MISC_BASE + 0)
{"trap", no_argument, NULL, OPTION_TRAP},
{"no-break", no_argument, NULL, OPTION_TRAP},
#define OPTION_MNO_SHARED (OPTION_MISC_BASE + 13)
{"mshared", no_argument, NULL, OPTION_MSHARED},
{"mno-shared", no_argument, NULL, OPTION_MNO_SHARED},
+#define OPTION_MSYM32 (OPTION_MISC_BASE + 14)
+#define OPTION_MNO_SYM32 (OPTION_MISC_BASE + 15)
+ {"msym32", no_argument, NULL, OPTION_MSYM32},
+ {"mno-sym32", no_argument, NULL, OPTION_MNO_SYM32},
/* ELF-specific options. */
#ifdef OBJ_ELF
-#define OPTION_ELF_BASE (OPTION_MISC_BASE + 14)
+#define OPTION_ELF_BASE (OPTION_MISC_BASE + 16)
#define OPTION_CALL_SHARED (OPTION_ELF_BASE + 0)
{"KPIC", no_argument, NULL, OPTION_CALL_SHARED},
{"call_shared", no_argument, NULL, OPTION_CALL_SHARED},
{"mpdr", no_argument, NULL, OPTION_PDR},
#define OPTION_NO_PDR (OPTION_ELF_BASE + 10)
{"mno-pdr", no_argument, NULL, OPTION_NO_PDR},
+#define OPTION_MVXWORKS_PIC (OPTION_ELF_BASE + 11)
+ {"mvxworks-pic", no_argument, NULL, OPTION_MVXWORKS_PIC},
#endif /* OBJ_ELF */
{NULL, no_argument, NULL, 0}
mips_opts.ase_mdmx = 0;
break;
+ case OPTION_DSP:
+ mips_opts.ase_dsp = 1;
+ break;
+
+ case OPTION_NO_DSP:
+ mips_opts.ase_dsp = 0;
+ break;
+
+ case OPTION_MT:
+ mips_opts.ase_mt = 1;
+ break;
+
+ case OPTION_NO_MT:
+ mips_opts.ase_mt = 0;
+ break;
+
case OPTION_MIPS16:
mips_opts.mips16 = 1;
- mips_no_prev_insn (FALSE);
+ mips_no_prev_insn ();
break;
case OPTION_NO_MIPS16:
mips_opts.mips16 = 0;
- mips_no_prev_insn (FALSE);
+ mips_no_prev_insn ();
break;
case OPTION_MIPS3D:
mips_opts.ase_mips3d = 0;
break;
+ case OPTION_SMARTMIPS:
+ mips_opts.ase_smartmips = 1;
+ break;
+
+ case OPTION_NO_SMARTMIPS:
+ mips_opts.ase_smartmips = 0;
+ break;
+
case OPTION_FIX_VR4120:
mips_fix_vr4120 = 1;
break;
mips_fix_vr4120 = 0;
break;
+ case OPTION_FIX_VR4130:
+ mips_fix_vr4130 = 1;
+ break;
+
+ case OPTION_NO_FIX_VR4130:
+ mips_fix_vr4130 = 0;
+ break;
+
case OPTION_RELAX_BRANCH:
mips_relax_branch = 1;
break;
mips_in_shared = FALSE;
break;
+ case OPTION_MSYM32:
+ mips_opts.sym32 = TRUE;
+ break;
+
+ case OPTION_MNO_SYM32:
+ mips_opts.sym32 = FALSE;
+ break;
+
#ifdef OBJ_ELF
/* When generating ELF code, we permit -KPIC and -call_shared to
select SVR4_PIC, and -non_shared to select no PIC. This is
}
mips_pic = SVR4_PIC;
mips_abicalls = TRUE;
- if (g_switch_seen && g_switch_value != 0)
- {
- as_bad (_("-G may not be used with SVR4 PIC code"));
- return 0;
- }
- g_switch_value = 0;
break;
case OPTION_NON_SHARED:
mips_abicalls = FALSE;
break;
- /* The -xgot option tells the assembler to use 32 offsets when
- accessing the got in SVR4_PIC mode. It is for Irix
+ /* The -xgot option tells the assembler to use 32 bit offsets
+ when accessing the got in SVR4_PIC mode. It is for Irix
compatibility. */
case OPTION_XGOT:
mips_big_got = 1;
#endif /* OBJ_ELF */
case 'G':
- if (mips_pic == SVR4_PIC)
- {
- as_bad (_("-G may not be used with SVR4 PIC code"));
- return 0;
- }
- else
- g_switch_value = atoi (arg);
+ g_switch_value = atoi (arg);
g_switch_seen = 1;
break;
case OPTION_NO_PDR:
mips_flag_pdr = FALSE;
break;
+
+ case OPTION_MVXWORKS_PIC:
+ mips_pic = VXWORKS_PIC;
+ break;
#endif /* OBJ_ELF */
default:
const struct mips_cpu_info *tune_info = 0;
/* GP relative stuff not working for PE */
- if (strncmp (TARGET_OS, "pe", 2) == 0
- && g_switch_value != 0)
+ if (strncmp (TARGET_OS, "pe", 2) == 0)
{
- if (g_switch_seen)
+ if (g_switch_seen && g_switch_value != 0)
as_bad (_("-G not supported in this configuration."));
g_switch_value = 0;
}
|| !ISA_HAS_64BIT_REGS (mips_opts.isa));
}
- /* ??? GAS treats single-float processors as though they had 64-bit
- float registers (although it complains when double-precision
- instructions are used). As things stand, saying they have 32-bit
- registers would lead to spurious "register must be even" messages.
- So here we assume float registers are always the same size as
- integer ones, unless the user says otherwise. */
- if (file_mips_fp32 < 0)
- file_mips_fp32 = file_mips_gp32;
+ switch (file_mips_fp32)
+ {
+ default:
+ case -1:
+ /* No user specified float register size.
+ ??? GAS treats single-float processors as though they had 64-bit
+ float registers (although it complains when double-precision
+ instructions are used). As things stand, saying they have 32-bit
+ registers would lead to spurious "register must be even" messages.
+ So here we assume float registers are never smaller than the
+ integer ones. */
+ if (file_mips_gp32 == 0)
+ /* 64-bit integer registers implies 64-bit float registers. */
+ file_mips_fp32 = 0;
+ else if ((mips_opts.ase_mips3d > 0 || mips_opts.ase_mdmx > 0)
+ && ISA_HAS_64BIT_FPRS (mips_opts.isa))
+ /* -mips3d and -mdmx imply 64-bit float registers, if possible. */
+ file_mips_fp32 = 0;
+ else
+ /* 32-bit float registers. */
+ file_mips_fp32 = 1;
+ break;
+
+ /* The user specified the size of the float registers. Check if it
+ agrees with the ABI and ISA. */
+ case 0:
+ if (!ISA_HAS_64BIT_FPRS (mips_opts.isa))
+ as_bad (_("-mfp64 used with a 32-bit fpu"));
+ else if (ABI_NEEDS_32BIT_REGS (mips_abi)
+ && !ISA_HAS_MXHC1 (mips_opts.isa))
+ as_warn (_("-mfp64 used with a 32-bit ABI"));
+ break;
+ case 1:
+ if (ABI_NEEDS_64BIT_REGS (mips_abi))
+ as_warn (_("-mfp32 used with a 64-bit ABI"));
+ break;
+ }
/* End of GCC-shared inference code. */
if (mips_opts.mips16 == -1)
mips_opts.mips16 = (CPU_HAS_MIPS16 (file_mips_arch)) ? 1 : 0;
if (mips_opts.ase_mips3d == -1)
- mips_opts.ase_mips3d = (CPU_HAS_MIPS3D (file_mips_arch)) ? 1 : 0;
+ mips_opts.ase_mips3d = ((CPU_HAS_MIPS3D (file_mips_arch)
+ || (arch_info->flags & MIPS_CPU_ASE_MIPS3D))
+ && file_mips_fp32 == 0) ? 1 : 0;
+ if (mips_opts.ase_mips3d && file_mips_fp32 == 1)
+ as_bad (_("-mfp32 used with -mips3d"));
+
if (mips_opts.ase_mdmx == -1)
- mips_opts.ase_mdmx = (CPU_HAS_MDMX (file_mips_arch)) ? 1 : 0;
+ mips_opts.ase_mdmx = ((CPU_HAS_MDMX (file_mips_arch)
+ || (arch_info->flags & MIPS_CPU_ASE_MDMX))
+ && file_mips_fp32 == 0) ? 1 : 0;
+ if (mips_opts.ase_mdmx && file_mips_fp32 == 1)
+ as_bad (_("-mfp32 used with -mdmx"));
+
+ if (mips_opts.ase_smartmips == -1)
+ mips_opts.ase_smartmips = (arch_info->flags & MIPS_CPU_ASE_SMARTMIPS) ? 1 : 0;
+ if (mips_opts.ase_smartmips && !ISA_SUPPORTS_SMARTMIPS)
+ as_warn ("%s ISA does not support SmartMIPS",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+
+ if (mips_opts.ase_dsp == -1)
+ mips_opts.ase_dsp = (arch_info->flags & MIPS_CPU_ASE_DSP) ? 1 : 0;
+ if (mips_opts.ase_dsp && !ISA_SUPPORTS_DSP_ASE)
+ as_warn ("%s ISA does not support DSP ASE",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+
+ if (mips_opts.ase_mt == -1)
+ mips_opts.ase_mt = (arch_info->flags & MIPS_CPU_ASE_MT) ? 1 : 0;
+ if (mips_opts.ase_mt && !ISA_SUPPORTS_MT_ASE)
+ as_warn ("%s ISA does not support MT ASE",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
file_mips_isa = mips_opts.isa;
file_ase_mips16 = mips_opts.mips16;
file_ase_mips3d = mips_opts.ase_mips3d;
file_ase_mdmx = mips_opts.ase_mdmx;
+ file_ase_smartmips = mips_opts.ase_smartmips;
+ file_ase_dsp = mips_opts.ase_dsp;
+ file_ase_mt = mips_opts.ase_mt;
mips_opts.gp32 = file_mips_gp32;
mips_opts.fp32 = file_mips_fp32;
}
/* Sort any unmatched HI16 and GOT16 relocs so that they immediately precede
- the corresponding LO16 reloc. This is called before md_apply_fix3 and
+ the corresponding LO16 reloc. This is called before md_apply_fix and
tc_gen_reloc. Unmatched relocs can only be generated by use of explicit
relocation operators.
if (*pos == l->fixp)
hi_pos = pos;
- if ((*pos)->fx_r_type == BFD_RELOC_LO16
+ if (((*pos)->fx_r_type == BFD_RELOC_LO16
+ || (*pos)->fx_r_type == BFD_RELOC_MIPS16_LO16)
&& (*pos)->fx_addsy == l->fixp->fx_addsy
&& (*pos)->fx_offset >= l->fixp->fx_offset
&& (lo_pos == NULL
return 0;
}
-/* This hook is called before a fix is simplified. We don't really
- decide whether to skip a fix here. Rather, we turn global symbols
- used as branch targets into local symbols, such that they undergo
- simplification. We can only do this if the symbol is defined and
- it is in the same section as the branch. If this doesn't hold, we
- emit a better error message than just saying the relocation is not
- valid for the selected object format.
-
- FIXP is the fix-up we're going to try to simplify, SEG is the
- segment in which the fix up occurs. The return value should be
- non-zero to indicate the fix-up is valid for further
- simplifications. */
-
-int
-mips_validate_fix (struct fix *fixP, asection *seg)
-{
- /* There's a lot of discussion on whether it should be possible to
- use R_MIPS_PC16 to represent branch relocations. The outcome
- seems to be that it can, but gas/bfd are very broken in creating
- RELA relocations for this, so for now we only accept branches to
- symbols in the same section. Anything else is of dubious value,
- since there's no guarantee that at link time the symbol would be
- in range. Even for branches to local symbols this is arguably
- wrong, since it we assume the symbol is not going to be
- overridden, which should be possible per ELF library semantics,
- but then, there isn't a dynamic relocation that could be used to
- this effect, and the target would likely be out of range as well.
-
- Unfortunately, it seems that there is too much code out there
- that relies on branches to symbols that are global to be resolved
- as if they were local, like the IRIX tools do, so we do it as
- well, but with a warning so that people are reminded to fix their
- code. If we ever get back to using R_MIPS_PC16 for branch
- targets, this entire block should go away (and probably the
- whole function). */
-
- if (fixP->fx_r_type == BFD_RELOC_16_PCREL_S2
- && ((OUTPUT_FLAVOR == bfd_target_ecoff_flavour
- || OUTPUT_FLAVOR == bfd_target_elf_flavour)
- || bfd_reloc_type_lookup (stdoutput, BFD_RELOC_16_PCREL_S2) == NULL)
- && fixP->fx_addsy)
- {
- if (! S_IS_DEFINED (fixP->fx_addsy))
- {
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Cannot branch to undefined symbol."));
- /* Avoid any further errors about this fixup. */
- fixP->fx_done = 1;
- }
- else if (S_GET_SEGMENT (fixP->fx_addsy) != seg)
- {
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Cannot branch to symbol in another section."));
- fixP->fx_done = 1;
- }
- else if (S_IS_EXTERNAL (fixP->fx_addsy))
- {
- symbolS *sym = fixP->fx_addsy;
-
- if (mips_pic == SVR4_PIC)
- as_warn_where (fixP->fx_file, fixP->fx_line,
- _("Pretending global symbol used as branch target is local."));
-
- fixP->fx_addsy = symbol_create (S_GET_NAME (sym),
- S_GET_SEGMENT (sym),
- S_GET_VALUE (sym),
- symbol_get_frag (sym));
- copy_symbol_attributes (fixP->fx_addsy, sym);
- S_CLEAR_EXTERNAL (fixP->fx_addsy);
- assert (symbol_resolved_p (sym));
- symbol_mark_resolved (fixP->fx_addsy);
- }
- }
-
- return 1;
-}
-
/* Apply a fixup to the object file. */
void
-md_apply_fix3 (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
+md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
bfd_byte *buf;
long insn;
buf = (bfd_byte *) (fixP->fx_frag->fr_literal + fixP->fx_where);
- assert (! fixP->fx_pcrel);
+ assert (! fixP->fx_pcrel || fixP->fx_r_type == BFD_RELOC_16_PCREL_S2);
/* Don't treat parts of a composite relocation as done. There are two
reasons for this:
constants. The easiest way of dealing with the pathological
exceptions is to generate a relocation against STN_UNDEF and
leave everything up to the linker. */
- if (fixP->fx_addsy == NULL && fixP->fx_tcbit == 0)
+ if (fixP->fx_addsy == NULL && ! fixP->fx_pcrel && fixP->fx_tcbit == 0)
fixP->fx_done = 1;
switch (fixP->fx_r_type)
{
+ case BFD_RELOC_MIPS_TLS_GD:
+ case BFD_RELOC_MIPS_TLS_LDM:
+ case BFD_RELOC_MIPS_TLS_DTPREL_HI16:
+ case BFD_RELOC_MIPS_TLS_DTPREL_LO16:
+ case BFD_RELOC_MIPS_TLS_GOTTPREL:
+ case BFD_RELOC_MIPS_TLS_TPREL_HI16:
+ case BFD_RELOC_MIPS_TLS_TPREL_LO16:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ /* fall through */
+
case BFD_RELOC_MIPS_JMP:
case BFD_RELOC_MIPS_SHIFT5:
case BFD_RELOC_MIPS_SHIFT6:
case BFD_RELOC_MIPS16_GPREL:
case BFD_RELOC_MIPS16_HI16:
case BFD_RELOC_MIPS16_HI16_S:
- assert (! fixP->fx_pcrel);
/* Nothing needed to do. The value comes from the reloc entry */
break;
if (fixP->fx_done)
{
if (8 <= sizeof (valueT))
- md_number_to_chars (buf, *valP, 8);
+ md_number_to_chars ((char *) buf, *valP, 8);
else
{
valueT hiv;
hiv = 0xffffffff;
else
hiv = 0;
- md_number_to_chars ((char *)(buf + target_big_endian ? 4 : 0),
+ md_number_to_chars ((char *)(buf + (target_big_endian ? 4 : 0)),
*valP, 4);
- md_number_to_chars ((char *)(buf + target_big_endian ? 0 : 4),
+ md_number_to_chars ((char *)(buf + (target_big_endian ? 0 : 4)),
hiv, 4);
}
}
value now. This can happen if we have a .word which is not
resolved when it appears but is later defined. */
if (fixP->fx_done)
- md_number_to_chars (buf, *valP, 4);
+ md_number_to_chars ((char *) buf, *valP, 4);
break;
case BFD_RELOC_16:
/* If we are deleting this reloc entry, we must fill in the
value now. */
if (fixP->fx_done)
- md_number_to_chars (buf, *valP, 2);
+ md_number_to_chars ((char *) buf, *valP, 2);
break;
case BFD_RELOC_LO16:
_("relocation overflow"));
if (target_big_endian)
buf += 2;
- md_number_to_chars (buf, *valP, 2);
+ md_number_to_chars ((char *) buf, *valP, 2);
}
break;
case BFD_RELOC_16_PCREL_S2:
if ((*valP & 0x3) != 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch to odd address (%lx)"), (long) *valP);
+ _("Branch to misaligned address (%lx)"), (long) *valP);
/*
* We need to save the bits in the instruction since fixup_segment()
if (*valP + 0x20000 <= 0x3ffff)
{
insn |= (*valP >> 2) & 0xffff;
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
}
else if (mips_pic == NO_PIC
&& fixP->fx_done
fixP->fx_done = 0;
fixP->fx_addsy = section_symbol (text_section);
*valP += md_pcrel_from (fixP);
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
}
else
{
static void
mips_align (int to, int fill, symbolS *label)
{
- mips_emit_delays (FALSE);
+ mips_emit_delays ();
frag_align (to, fill, 0);
record_alignment (now_seg, to);
if (label != NULL)
demand_empty_rest_of_line ();
}
-void
-mips_flush_pending_output (void)
-{
- mips_emit_delays (FALSE);
- mips_clear_insn_labels ();
-}
-
static void
s_change_sec (int sec)
{
obj_elf_section_change_hook ();
#endif
- mips_emit_delays (FALSE);
+ mips_emit_delays ();
switch (sec)
{
case 't':
There's nothing really harmful in this, since bfd will correct
SHT_PROGBITS to SHT_MIPS_DWARF before writing out the file. But it
- means that, for backwards compatibiltiy, the special_section entries
+ means that, for backwards compatibility, the special_section entries
for dwarf sections must use SHT_PROGBITS rather than SHT_MIPS_DWARF.
Even so, we shouldn't force users of the MIPS .section syntax to
symbolS *label;
label = insn_labels != NULL ? insn_labels->label : NULL;
- mips_emit_delays (FALSE);
+ mips_emit_delays ();
if (log_size > 0 && auto_align)
mips_align (log_size, 0, label);
mips_clear_insn_labels ();
label = insn_labels != NULL ? insn_labels->label : NULL;
- mips_emit_delays (FALSE);
+ mips_emit_delays ();
if (auto_align)
{
symbolS *symbolP;
flagword flag;
- name = input_line_pointer;
- c = get_symbol_end ();
- symbolP = symbol_find_or_make (name);
- *input_line_pointer = c;
- SKIP_WHITESPACE ();
-
- /* On Irix 5, every global symbol that is not explicitly labelled as
- being a function is apparently labelled as being an object. */
- flag = BSF_OBJECT;
-
- if (! is_end_of_line[(unsigned char) *input_line_pointer])
+ do
{
- char *secname;
- asection *sec;
-
- secname = input_line_pointer;
+ name = input_line_pointer;
c = get_symbol_end ();
- sec = bfd_get_section_by_name (stdoutput, secname);
- if (sec == NULL)
- as_bad (_("%s: no such section"), secname);
+ symbolP = symbol_find_or_make (name);
+ S_SET_EXTERNAL (symbolP);
+
*input_line_pointer = c;
+ SKIP_WHITESPACE ();
- if (sec != NULL && (sec->flags & SEC_CODE) != 0)
- flag = BSF_FUNCTION;
- }
+ /* On Irix 5, every global symbol that is not explicitly labelled as
+ being a function is apparently labelled as being an object. */
+ flag = BSF_OBJECT;
+
+ if (!is_end_of_line[(unsigned char) *input_line_pointer]
+ && (*input_line_pointer != ','))
+ {
+ char *secname;
+ asection *sec;
- symbol_get_bfdsym (symbolP)->flags |= flag;
+ secname = input_line_pointer;
+ c = get_symbol_end ();
+ sec = bfd_get_section_by_name (stdoutput, secname);
+ if (sec == NULL)
+ as_bad (_("%s: no such section"), secname);
+ *input_line_pointer = c;
+
+ if (sec != NULL && (sec->flags & SEC_CODE) != 0)
+ flag = BSF_FUNCTION;
+ }
+
+ symbol_get_bfdsym (symbolP)->flags |= flag;
+
+ c = *input_line_pointer;
+ if (c == ',')
+ {
+ input_line_pointer++;
+ SKIP_WHITESPACE ();
+ if (is_end_of_line[(unsigned char) *input_line_pointer])
+ c = '\n';
+ }
+ }
+ while (c == ',');
- S_SET_EXTERNAL (symbolP);
demand_empty_rest_of_line ();
}
if (strcmp (name, "reorder") == 0)
{
- if (mips_opts.noreorder && prev_nop_frag != NULL)
- {
- /* If we still have pending nops, we can discard them. The
- usual nop handling will insert any that are still
- needed. */
- prev_nop_frag->fr_fix -= (prev_nop_frag_holds
- * (mips_opts.mips16 ? 2 : 4));
- prev_nop_frag = NULL;
- }
- mips_opts.noreorder = 0;
+ if (mips_opts.noreorder)
+ end_noreorder ();
}
else if (strcmp (name, "noreorder") == 0)
{
- mips_emit_delays (TRUE);
- mips_opts.noreorder = 1;
- mips_any_noreorder = 1;
+ if (!mips_opts.noreorder)
+ start_noreorder ();
}
else if (strcmp (name, "at") == 0)
{
{
mips_opts.nobopt = 1;
}
+ else if (strcmp (name, "gp=default") == 0)
+ mips_opts.gp32 = file_mips_gp32;
+ else if (strcmp (name, "gp=32") == 0)
+ mips_opts.gp32 = 1;
+ else if (strcmp (name, "gp=64") == 0)
+ {
+ if (!ISA_HAS_64BIT_REGS (mips_opts.isa))
+ as_warn ("%s isa does not support 64-bit registers",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ mips_opts.gp32 = 0;
+ }
+ else if (strcmp (name, "fp=default") == 0)
+ mips_opts.fp32 = file_mips_fp32;
+ else if (strcmp (name, "fp=32") == 0)
+ mips_opts.fp32 = 1;
+ else if (strcmp (name, "fp=64") == 0)
+ {
+ if (!ISA_HAS_64BIT_FPRS (mips_opts.isa))
+ as_warn ("%s isa does not support 64-bit floating point registers",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ mips_opts.fp32 = 0;
+ }
else if (strcmp (name, "mips16") == 0
|| strcmp (name, "MIPS-16") == 0)
mips_opts.mips16 = 1;
else if (strcmp (name, "nomips16") == 0
|| strcmp (name, "noMIPS-16") == 0)
mips_opts.mips16 = 0;
+ else if (strcmp (name, "smartmips") == 0)
+ {
+ if (!ISA_SUPPORTS_SMARTMIPS)
+ as_warn ("%s ISA does not support SmartMIPS ASE",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ mips_opts.ase_smartmips = 1;
+ }
+ else if (strcmp (name, "nosmartmips") == 0)
+ mips_opts.ase_smartmips = 0;
else if (strcmp (name, "mips3d") == 0)
mips_opts.ase_mips3d = 1;
else if (strcmp (name, "nomips3d") == 0)
mips_opts.ase_mdmx = 1;
else if (strcmp (name, "nomdmx") == 0)
mips_opts.ase_mdmx = 0;
+ else if (strcmp (name, "dsp") == 0)
+ {
+ if (!ISA_SUPPORTS_DSP_ASE)
+ as_warn ("%s ISA does not support DSP ASE",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ mips_opts.ase_dsp = 1;
+ }
+ else if (strcmp (name, "nodsp") == 0)
+ mips_opts.ase_dsp = 0;
+ else if (strcmp (name, "mt") == 0)
+ {
+ if (!ISA_SUPPORTS_MT_ASE)
+ as_warn ("%s ISA does not support MT ASE",
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+ mips_opts.ase_mt = 1;
+ }
+ else if (strcmp (name, "nomt") == 0)
+ mips_opts.ase_mt = 0;
else if (strncmp (name, "mips", 4) == 0 || strncmp (name, "arch=", 5) == 0)
{
int reset = 0;
/* If we're changing the reorder mode we need to handle
delay slots correctly. */
if (s->options.noreorder && ! mips_opts.noreorder)
- mips_emit_delays (TRUE);
+ start_noreorder ();
else if (! s->options.noreorder && mips_opts.noreorder)
- {
- if (prev_nop_frag != NULL)
- {
- prev_nop_frag->fr_fix -= (prev_nop_frag_holds
- * (mips_opts.mips16 ? 2 : 4));
- prev_nop_frag = NULL;
- }
- }
+ end_noreorder ();
mips_opts = s->options;
mips_opts_stack = s->next;
free (s);
}
}
+ else if (strcmp (name, "sym32") == 0)
+ mips_opts.sym32 = TRUE;
+ else if (strcmp (name, "nosym32") == 0)
+ mips_opts.sym32 = FALSE;
else
{
as_warn (_("Tried to set unrecognized symbol: %s\n"), name);
The .cpload argument is normally $25 == $t9.
The -mno-shared option changes this to:
- lui $gp,%hi(_gp)
- addiu $gp,$gp,%lo(_gp)
+ lui $gp,%hi(__gnu_local_gp)
+ addiu $gp,$gp,%lo(__gnu_local_gp)
and the argument is ignored. This saves an instruction, but the
resulting code is not position independent; it uses an absolute
- address for _gp. Thus code assembled with -mno-shared can go into
- an ordinary executable, but not into a shared library. */
+ address for __gnu_local_gp. Thus code assembled with -mno-shared
+ can go into an ordinary executable, but not into a shared library. */
static void
s_cpload (int ignore ATTRIBUTE_UNUSED)
/* If we need to produce a 64-bit address, we are better off using
the default instruction sequence. */
- in_shared = mips_in_shared || HAVE_64BIT_ADDRESSES;
+ in_shared = mips_in_shared || HAVE_64BIT_SYMBOLS;
ex.X_op = O_symbol;
- ex.X_add_symbol = symbol_find_or_make (in_shared ? "_gp_disp" : "_gp");
+ ex.X_add_symbol = symbol_find_or_make (in_shared ? "_gp_disp" :
+ "__gnu_local_gp");
ex.X_op_symbol = NULL;
ex.X_add_number = 0;
macro_build (NULL, "daddu", "d,v,t", mips_cpreturn_register,
mips_gp_register, 0);
- if (mips_in_shared || HAVE_64BIT_ADDRESSES)
+ if (mips_in_shared || HAVE_64BIT_SYMBOLS)
{
macro_build (&ex_sym, "lui", "t,u", mips_gp_register,
-1, BFD_RELOC_GPREL16, BFD_RELOC_MIPS_SUB,
expressionS ex;
ex.X_op = O_symbol;
- ex.X_add_symbol = symbol_find_or_make ("_gp");
+ ex.X_add_symbol = symbol_find_or_make ("__gnu_local_gp");
ex.X_op_symbol = NULL;
ex.X_add_number = 0;
}
label = insn_labels != NULL ? insn_labels->label : NULL;
- mips_emit_delays (TRUE);
+ mips_emit_delays ();
if (auto_align)
mips_align (2, 0, label);
mips_clear_insn_labels ();
}
label = insn_labels != NULL ? insn_labels->label : NULL;
- mips_emit_delays (TRUE);
+ mips_emit_delays ();
if (auto_align)
mips_align (3, 0, label);
mips_clear_insn_labels ();
int
tc_get_register (int frame)
{
- int reg;
+ unsigned int reg;
SKIP_WHITESPACE ();
- if (*input_line_pointer++ != '$')
- {
- as_warn (_("expected `$'"));
- reg = ZERO;
- }
- else if (ISDIGIT (*input_line_pointer))
- {
- reg = get_absolute_expression ();
- if (reg < 0 || reg >= 32)
- {
- as_warn (_("Bad register number"));
- reg = ZERO;
- }
- }
- else
- {
- if (strncmp (input_line_pointer, "ra", 2) == 0)
- {
- reg = RA;
- input_line_pointer += 2;
- }
- else if (strncmp (input_line_pointer, "fp", 2) == 0)
- {
- reg = FP;
- input_line_pointer += 2;
- }
- else if (strncmp (input_line_pointer, "sp", 2) == 0)
- {
- reg = SP;
- input_line_pointer += 2;
- }
- else if (strncmp (input_line_pointer, "gp", 2) == 0)
- {
- reg = GP;
- input_line_pointer += 2;
- }
- else if (strncmp (input_line_pointer, "at", 2) == 0)
- {
- reg = AT;
- input_line_pointer += 2;
- }
- else if (strncmp (input_line_pointer, "kt0", 3) == 0)
- {
- reg = KT0;
- input_line_pointer += 3;
- }
- else if (strncmp (input_line_pointer, "kt1", 3) == 0)
- {
- reg = KT1;
- input_line_pointer += 3;
- }
- else if (strncmp (input_line_pointer, "zero", 4) == 0)
- {
- reg = ZERO;
- input_line_pointer += 4;
- }
- else
- {
- as_warn (_("Unrecognized register name"));
- reg = ZERO;
- while (ISALNUM(*input_line_pointer))
- input_line_pointer++;
- }
- }
+ if (! reg_lookup (&input_line_pointer, RWARN | RTYPE_NUM | RTYPE_GP, ®))
+ reg = 0;
if (frame)
{
mips_frame_reg = reg != 0 ? reg : SP;
change = nopic_need_relax (fragp->fr_symbol, 0);
else if (mips_pic == SVR4_PIC)
change = pic_need_relax (fragp->fr_symbol, segtype);
+ else if (mips_pic == VXWORKS_PIC)
+ /* For vxworks, GOT16 relocations never have a corresponding LO16. */
+ change = 0;
else
abort ();
placed anywhere. Rather than break backwards compatibility by changing
this, it seems better not to force the issue, and instead keep the
original symbol. This will work with either linker behavior. */
- if ((fixp->fx_r_type == BFD_RELOC_LO16 || reloc_needs_lo_p (fixp->fx_r_type))
+ if ((fixp->fx_r_type == BFD_RELOC_LO16
+ || fixp->fx_r_type == BFD_RELOC_MIPS16_LO16
+ || reloc_needs_lo_p (fixp->fx_r_type))
&& HAVE_IN_PLACE_ADDENDS
&& (S_GET_SEGMENT (fixp->fx_addsy)->flags & SEC_MERGE) != 0)
return 0;
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
- assert (! fixp->fx_pcrel);
- reloc->addend = fixp->fx_addnumber;
+ if (fixp->fx_pcrel)
+ {
+ assert (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2);
+
+ /* At this point, fx_addnumber is "symbol offset - pcrel address".
+ Relocations want only the symbol offset. */
+ reloc->addend = fixp->fx_addnumber + reloc->address;
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
+ {
+ /* A gruesome hack which is a result of the gruesome gas
+ reloc handling. What's worse, for COFF (as opposed to
+ ECOFF), we might need yet another copy of reloc->address.
+ See bfd_install_relocation. */
+ reloc->addend += reloc->address;
+ }
+ }
+ else
+ reloc->addend = fixp->fx_addnumber;
/* Since the old MIPS ELF ABI uses Rel instead of Rela, encode the vtable
entry to be used in the relocation's section offset. */
code = fixp->fx_r_type;
- /* To support a PC relative reloc, we used a Cygnus extension.
- We check for that here to make sure that we don't let such a
- reloc escape normally. (FIXME: This was formerly used by
- embedded-PIC support, but is now used by branch handling in
- general. That probably should be fixed.) */
- if ((OUTPUT_FLAVOR == bfd_target_ecoff_flavour
- || OUTPUT_FLAVOR == bfd_target_elf_flavour)
- && code == BFD_RELOC_16_PCREL_S2)
- reloc->howto = NULL;
- else
- reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
-
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
if (reloc->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
exp.X_add_number = fragp->fr_offset;
fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
- 4, &exp, 1,
- BFD_RELOC_16_PCREL_S2);
+ 4, &exp, 1, BFD_RELOC_16_PCREL_S2);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
buf += 4;
}
else
i--;
insn |= i;
/* Branch over the jump. */
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
buf += 4;
/* Nop */
- md_number_to_chars (buf, 0, 4);
+ md_number_to_chars ((char *) buf, 0, 4);
buf += 4;
if (RELAX_BRANCH_LIKELY (fragp->fr_subtype))
delay slot. */
insn |= i;
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
buf += 4;
- md_number_to_chars (buf, 0, 4);
+ md_number_to_chars ((char *) buf, 0, 4);
buf += 4;
}
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
buf += 4;
}
else
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
buf += 4;
if (mips_opts.isa == ISA_MIPS1)
{
/* nop */
- md_number_to_chars (buf, 0, 4);
+ md_number_to_chars ((char *) buf, 0, 4);
buf += 4;
}
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
buf += 4;
/* j(al)r $at. */
else
insn = 0x00200008;
- md_number_to_chars (buf, insn, 4);
+ md_number_to_chars ((char *) buf, insn, 4);
buf += 4;
}
}
if (use_extend)
{
- md_number_to_chars (buf, 0xf000 | extend, 2);
+ md_number_to_chars ((char *) buf, 0xf000 | extend, 2);
fragp->fr_fix += 2;
buf += 2;
}
- md_number_to_chars (buf, insn, 2);
+ md_number_to_chars ((char *) buf, insn, 2);
fragp->fr_fix += 2;
buf += 2;
}
l->label = sym;
l->next = insn_labels;
insn_labels = l;
+
+#ifdef OBJ_ELF
+ dwarf2_emit_label (sym);
+#endif
}
\f
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_CPIC;
/* Set MIPS ELF flags for ASEs. */
+ /* We may need to define a new flag for DSP ASE, and set this flag when
+ file_ase_dsp is true. */
+ /* We may need to define a new flag for MT ASE, and set this flag when
+ file_ase_mt is true. */
if (file_ase_mips16)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_M16;
#if 0 /* XXX FIXME */
if (mips_32bitmode)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_32BITMODE;
+
+#if 0 /* XXX FIXME */
+ /* 32 bit code with 64 bit FP registers. */
+ if (!file_mips_fp32 && ABI_NEEDS_32BIT_REGS (mips_abi))
+ elf_elfheader (stdoutput)->e_flags |= ???;
+#endif
}
#endif /* OBJ_ELF || OBJ_MAYBE_ELF */
\f
typedef struct proc {
- symbolS *isym;
+ symbolS *func_sym;
+ symbolS *func_end_sym;
unsigned long reg_mask;
unsigned long reg_offset;
unsigned long fpreg_mask;
if (p != NULL)
{
assert (S_GET_NAME (p));
- if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->isym)))
+ if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->func_sym)))
as_warn (_(".end symbol does not match .ent symbol."));
if (debug_type == DEBUG_STABS)
as_warn (_(".end directive missing or unknown symbol"));
#ifdef OBJ_ELF
+ /* Create an expression to calculate the size of the function. */
+ if (p && cur_proc_ptr)
+ {
+ OBJ_SYMFIELD_TYPE *obj = symbol_get_obj (p);
+ expressionS *exp = xmalloc (sizeof (expressionS));
+
+ obj->size = exp;
+ exp->X_op = O_subtract;
+ exp->X_add_symbol = symbol_temp_new_now ();
+ exp->X_op_symbol = p;
+ exp->X_add_number = 0;
+
+ cur_proc_ptr->func_end_sym = exp->X_add_symbol;
+ }
+
/* Generate a .pdr section. */
if (OUTPUT_FLAVOR == bfd_target_elf_flavour && ! ECOFF_DEBUGGING
&& mips_flag_pdr)
cur_proc_ptr = &cur_proc;
memset (cur_proc_ptr, '\0', sizeof (procS));
- cur_proc_ptr->isym = symbolP;
+ cur_proc_ptr->func_sym = symbolP;
symbol_get_bfdsym (symbolP)->flags |= BSF_FUNCTION;
static const struct mips_cpu_info mips_cpu_info_table[] =
{
/* Entries for generic ISAs */
- { "mips1", 1, ISA_MIPS1, CPU_R3000 },
- { "mips2", 1, ISA_MIPS2, CPU_R6000 },
- { "mips3", 1, ISA_MIPS3, CPU_R4000 },
- { "mips4", 1, ISA_MIPS4, CPU_R8000 },
- { "mips5", 1, ISA_MIPS5, CPU_MIPS5 },
- { "mips32", 1, ISA_MIPS32, CPU_MIPS32 },
- { "mips32r2", 1, ISA_MIPS32R2, CPU_MIPS32R2 },
- { "mips64", 1, ISA_MIPS64, CPU_MIPS64 },
- { "mips64r2", 1, ISA_MIPS64R2, CPU_MIPS64R2 },
+ { "mips1", MIPS_CPU_IS_ISA, ISA_MIPS1, CPU_R3000 },
+ { "mips2", MIPS_CPU_IS_ISA, ISA_MIPS2, CPU_R6000 },
+ { "mips3", MIPS_CPU_IS_ISA, ISA_MIPS3, CPU_R4000 },
+ { "mips4", MIPS_CPU_IS_ISA, ISA_MIPS4, CPU_R8000 },
+ { "mips5", MIPS_CPU_IS_ISA, ISA_MIPS5, CPU_MIPS5 },
+ { "mips32", MIPS_CPU_IS_ISA, ISA_MIPS32, CPU_MIPS32 },
+ { "mips32r2", MIPS_CPU_IS_ISA, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "mips64", MIPS_CPU_IS_ISA, ISA_MIPS64, CPU_MIPS64 },
+ { "mips64r2", MIPS_CPU_IS_ISA, ISA_MIPS64R2, CPU_MIPS64R2 },
/* MIPS I */
- { "r3000", 0, ISA_MIPS1, CPU_R3000 },
- { "r2000", 0, ISA_MIPS1, CPU_R3000 },
- { "r3900", 0, ISA_MIPS1, CPU_R3900 },
+ { "r3000", 0, ISA_MIPS1, CPU_R3000 },
+ { "r2000", 0, ISA_MIPS1, CPU_R3000 },
+ { "r3900", 0, ISA_MIPS1, CPU_R3900 },
/* MIPS II */
- { "r6000", 0, ISA_MIPS2, CPU_R6000 },
+ { "r6000", 0, ISA_MIPS2, CPU_R6000 },
/* MIPS III */
- { "r4000", 0, ISA_MIPS3, CPU_R4000 },
- { "r4010", 0, ISA_MIPS2, CPU_R4010 },
- { "vr4100", 0, ISA_MIPS3, CPU_VR4100 },
- { "vr4111", 0, ISA_MIPS3, CPU_R4111 },
- { "vr4120", 0, ISA_MIPS3, CPU_VR4120 },
- { "vr4130", 0, ISA_MIPS3, CPU_VR4120 },
- { "vr4181", 0, ISA_MIPS3, CPU_R4111 },
- { "vr4300", 0, ISA_MIPS3, CPU_R4300 },
- { "r4400", 0, ISA_MIPS3, CPU_R4400 },
- { "r4600", 0, ISA_MIPS3, CPU_R4600 },
- { "orion", 0, ISA_MIPS3, CPU_R4600 },
- { "r4650", 0, ISA_MIPS3, CPU_R4650 },
+ { "r4000", 0, ISA_MIPS3, CPU_R4000 },
+ { "r4010", 0, ISA_MIPS2, CPU_R4010 },
+ { "vr4100", 0, ISA_MIPS3, CPU_VR4100 },
+ { "vr4111", 0, ISA_MIPS3, CPU_R4111 },
+ { "vr4120", 0, ISA_MIPS3, CPU_VR4120 },
+ { "vr4130", 0, ISA_MIPS3, CPU_VR4120 },
+ { "vr4181", 0, ISA_MIPS3, CPU_R4111 },
+ { "vr4300", 0, ISA_MIPS3, CPU_R4300 },
+ { "r4400", 0, ISA_MIPS3, CPU_R4400 },
+ { "r4600", 0, ISA_MIPS3, CPU_R4600 },
+ { "orion", 0, ISA_MIPS3, CPU_R4600 },
+ { "r4650", 0, ISA_MIPS3, CPU_R4650 },
/* MIPS IV */
- { "r8000", 0, ISA_MIPS4, CPU_R8000 },
- { "r10000", 0, ISA_MIPS4, CPU_R10000 },
- { "r12000", 0, ISA_MIPS4, CPU_R12000 },
- { "vr5000", 0, ISA_MIPS4, CPU_R5000 },
- { "vr5400", 0, ISA_MIPS4, CPU_VR5400 },
- { "vr5500", 0, ISA_MIPS4, CPU_VR5500 },
- { "rm5200", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5230", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5231", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5261", 0, ISA_MIPS4, CPU_R5000 },
- { "rm5721", 0, ISA_MIPS4, CPU_R5000 },
- { "rm7000", 0, ISA_MIPS4, CPU_RM7000 },
- { "rm9000", 0, ISA_MIPS4, CPU_RM9000 },
+ { "r8000", 0, ISA_MIPS4, CPU_R8000 },
+ { "r10000", 0, ISA_MIPS4, CPU_R10000 },
+ { "r12000", 0, ISA_MIPS4, CPU_R12000 },
+ { "vr5000", 0, ISA_MIPS4, CPU_R5000 },
+ { "vr5400", 0, ISA_MIPS4, CPU_VR5400 },
+ { "vr5500", 0, ISA_MIPS4, CPU_VR5500 },
+ { "rm5200", 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5230", 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5231", 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5261", 0, ISA_MIPS4, CPU_R5000 },
+ { "rm5721", 0, ISA_MIPS4, CPU_R5000 },
+ { "rm7000", 0, ISA_MIPS4, CPU_RM7000 },
+ { "rm9000", 0, ISA_MIPS4, CPU_RM9000 },
/* MIPS 32 */
- { "4kc", 0, ISA_MIPS32, CPU_MIPS32 },
- { "4km", 0, ISA_MIPS32, CPU_MIPS32 },
- { "4kp", 0, ISA_MIPS32, CPU_MIPS32 },
+ { "4kc", 0, ISA_MIPS32, CPU_MIPS32 },
+ { "4km", 0, ISA_MIPS32, CPU_MIPS32 },
+ { "4kp", 0, ISA_MIPS32, CPU_MIPS32 },
+ { "4ksc", MIPS_CPU_ASE_SMARTMIPS, ISA_MIPS32, CPU_MIPS32 },
+
+ /* MIPS 32 Release 2 */
+ { "4kec", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "4kem", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "4kep", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "4ksd", MIPS_CPU_ASE_SMARTMIPS, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m4k", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "m4kp", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24k", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kc", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kf", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kx", 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* 24ke is a 24k with DSP ASE, other ASEs are optional. */
+ { "24ke", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kec", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kef", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "24kex", MIPS_CPU_ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* 34k is a 24k with MT ASE, other ASEs are optional. */
+ { "34kc", MIPS_CPU_ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kf", MIPS_CPU_ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "34kx", MIPS_CPU_ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
/* MIPS 64 */
- { "5kc", 0, ISA_MIPS64, CPU_MIPS64 },
- { "20kc", 0, ISA_MIPS64, CPU_MIPS64 },
+ { "5kc", 0, ISA_MIPS64, CPU_MIPS64 },
+ { "5kf", 0, ISA_MIPS64, CPU_MIPS64 },
+ { "20kc", MIPS_CPU_ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 },
+
+ /* MIPS 64 Release 2 */
+ { "25kf", MIPS_CPU_ASE_MIPS3D, ISA_MIPS64R2, CPU_MIPS64R2 },
/* Broadcom SB-1 CPU core */
- { "sb1", 0, ISA_MIPS64, CPU_SB1 },
+ { "sb1", 0, ISA_MIPS64, CPU_SB1 },
/* End marker */
{ NULL, 0, 0, 0 }
int i;
for (i = 0; mips_cpu_info_table[i].name != NULL; i++)
- if (mips_cpu_info_table[i].is_isa
+ if ((mips_cpu_info_table[i].flags & MIPS_CPU_IS_ISA)
&& isa == mips_cpu_info_table[i].isa)
return (&mips_cpu_info_table[i]);
-mips16 generate mips16 instructions\n\
-no-mips16 do not generate mips16 instructions\n"));
fprintf (stream, _("\
+-msmartmips generate smartmips instructions\n\
+-mno-smartmips do not generate smartmips instructions\n"));
+ fprintf (stream, _("\
+-mdsp generate DSP instructions\n\
+-mno-dsp do not generate DSP instructions\n"));
+ fprintf (stream, _("\
+-mmt generate MT instructions\n\
+-mno-mt do not generate MT instructions\n"));
+ fprintf (stream, _("\
-mfix-vr4120 work around certain VR4120 errata\n\
+-mfix-vr4130 work around VR4130 mflo/mfhi errata\n\
-mgp32 use 32-bit GPRs, regardless of the chosen ISA\n\
-mfp32 use 32-bit FPRs, regardless of the chosen ISA\n\
+-mno-shared optimize output for executables\n\
+-msym32 assume all symbols have 32-bit values\n\
-O0 remove unneeded NOPs, do not swap branches\n\
-O remove unneeded NOPs and swap branches\n\
--[no-]construct-floats [dis]allow floating point values to be constructed\n\
-non_shared do not generate position independent code\n\
-xgot assume a 32 bit GOT\n\
-mpdr, -mno-pdr enable/disable creation of .pdr sections\n\
+-mshared, -mno-shared disable/enable .cpload optimization for\n\
+ non-shared code\n\
-mabi=ABI create ABI conformant object file for:\n"));
first = 1;
else
return 4;
}
+
+/* Standard calling conventions leave the CFA at SP on entry. */
+void
+mips_cfi_frame_initial_instructions (void)
+{
+ cfi_add_CFA_def_cfa_register (SP);
+}
+
+int
+tc_mips_regname_to_dw2regnum (char *regname)
+{
+ unsigned int regnum = -1;
+ unsigned int reg;
+
+ if (reg_lookup (®name, RTYPE_GP | RTYPE_NUM, ®))
+ regnum = reg;
+
+ return regnum;
+}