but nothing is ideal around here.
*/
-static char *insn_error;
+/* Types of printf format used for instruction-related error messages.
+ "I" means int ("%d") and "S" means string ("%s"). */
+enum mips_insn_error_format {
+ ERR_FMT_PLAIN,
+ ERR_FMT_I,
+ ERR_FMT_SS,
+};
+
+/* Information about an error that was found while assembling the current
+ instruction. */
+struct mips_insn_error {
+ /* We sometimes need to match an instruction against more than one
+ opcode table entry. Errors found during this matching are reported
+ against a particular syntactic argument rather than against the
+ instruction as a whole. We grade these messages so that errors
+ against argument N have a greater priority than an error against
+ any argument < N, since the former implies that arguments up to N
+ were acceptable and that the opcode entry was therefore a closer match.
+ If several matches report an error against the same argument,
+ we only use that error if it is the same in all cases.
+
+ min_argnum is the minimum argument number for which an error message
+ should be accepted. It is 0 if MSG is against the instruction as
+ a whole. */
+ int min_argnum;
+
+ /* The printf()-style message, including its format and arguments. */
+ enum mips_insn_error_format format;
+ const char *msg;
+ union {
+ int i;
+ const char *ss[2];
+ } u;
+};
+
+/* The error that should be reported for the current instruction. */
+static struct mips_insn_error insn_error;
static int auto_align = 1;
fill a branch delay slot. */
static struct mips_cl_insn history[1 + MAX_NOPS];
+/* Arrays of operands for each instruction. */
+#define MAX_OPERANDS 6
+struct mips_operand_array {
+ const struct mips_operand *operand[MAX_OPERANDS];
+};
+static struct mips_operand_array *mips_operands;
+static struct mips_operand_array *mips16_operands;
+static struct mips_operand_array *micromips_operands;
+
/* Nop instructions used by emit_nop. */
static struct mips_cl_insn nop_insn;
static struct mips_cl_insn mips16_nop_insn;
static fragS *prev_reloc_op_frag;
-/* Map normal MIPS register numbers to mips16 register numbers. */
-
-#define X ILLEGAL_REG
-static const int mips32_to_16_reg_map[] =
-{
- X, X, 2, 3, 4, 5, 6, 7,
- X, X, X, X, X, X, X, X,
- 0, 1, X, X, X, X, X, X,
- X, X, X, X, X, X, X, X
-};
-#undef X
-
/* Map mips16 register numbers to normal MIPS register numbers. */
static const unsigned int mips16_to_32_reg_map[] =
/* Map microMIPS register numbers to normal MIPS register numbers. */
-#define micromips_to_32_reg_b_map mips16_to_32_reg_map
-#define micromips_to_32_reg_c_map mips16_to_32_reg_map
#define micromips_to_32_reg_d_map mips16_to_32_reg_map
-#define micromips_to_32_reg_e_map mips16_to_32_reg_map
-#define micromips_to_32_reg_f_map mips16_to_32_reg_map
-#define micromips_to_32_reg_g_map mips16_to_32_reg_map
/* The microMIPS registers with type h. */
static const unsigned int micromips_to_32_reg_h_map1[] =
6, 7, 7, 21, 22, 5, 6, 7
};
-#define micromips_to_32_reg_l_map mips16_to_32_reg_map
-
/* The microMIPS registers with type m. */
static const unsigned int micromips_to_32_reg_m_map[] =
{
#define micromips_to_32_reg_n_map micromips_to_32_reg_m_map
-/* The microMIPS registers with type q. */
-static const unsigned int micromips_to_32_reg_q_map[] =
-{
- 0, 17, 2, 3, 4, 5, 6, 7
-};
-
/* Classifies the kind of instructions we're interested in when
implementing -mfix-vr4120. */
enum fix_vr4120_class
(((x) &~ (offsetT) 0xffffffff) == 0 \
|| (((x) &~ (offsetT) 0xffffffff) == ~ (offsetT) 0xffffffff))
-/* Replace bits MASK << SHIFT of STRUCT with the equivalent bits in
- VALUE << SHIFT. VALUE is evaluated exactly once. */
-#define INSERT_BITS(STRUCT, VALUE, MASK, SHIFT) \
- (STRUCT) = (((STRUCT) & ~((MASK) << (SHIFT))) \
- | (((VALUE) & (MASK)) << (SHIFT)))
-
/* Extract bits MASK << SHIFT from STRUCT and shift them right
SHIFT places. */
#define EXTRACT_BITS(STRUCT, MASK, SHIFT) \
(((STRUCT) >> (SHIFT)) & (MASK))
-/* Change INSN's opcode so that the operand given by FIELD has value VALUE.
- INSN is a mips_cl_insn structure and VALUE is evaluated exactly once.
-
- include/opcode/mips.h specifies operand fields using the macros
- OP_MASK_<FIELD> and OP_SH_<FIELD>. The MIPS16 equivalents start
- with "MIPS16OP" instead of "OP". */
-#define INSERT_OPERAND(MICROMIPS, FIELD, INSN, VALUE) \
- do \
- if (!(MICROMIPS)) \
- INSERT_BITS ((INSN).insn_opcode, VALUE, \
- OP_MASK_##FIELD, OP_SH_##FIELD); \
- else \
- INSERT_BITS ((INSN).insn_opcode, VALUE, \
- MICROMIPSOP_MASK_##FIELD, MICROMIPSOP_SH_##FIELD); \
- while (0)
-#define MIPS16_INSERT_OPERAND(FIELD, INSN, VALUE) \
- INSERT_BITS ((INSN).insn_opcode, VALUE, \
- MIPS16OP_MASK_##FIELD, MIPS16OP_SH_##FIELD)
-
/* Extract the operand given by FIELD from mips_cl_insn INSN. */
#define EXTRACT_OPERAND(MICROMIPS, FIELD, INSN) \
(!(MICROMIPS) \
\f
static char *expr_end;
-/* Expressions which appear in macro instructions. These are set by
- mips_ip and read by macro. */
+/* An expression in a macro instruction. This is set by mips_ip and
+ mips16_ip and when populated is always an O_constant. */
static expressionS imm_expr;
-static expressionS imm2_expr;
/* The relocatable field in an instruction and the relocs associated
with it. These variables are used for instructions like LUI and
base = mips_opts.micromips ? "microMIPS" : "MIPS";
size = ISA_HAS_64BIT_REGS (mips_opts.isa) ? 64 : 32;
if (min_rev < 0)
- as_warn (_("The %d-bit %s architecture does not support the"
+ as_warn (_("the %d-bit %s architecture does not support the"
" `%s' extension"), size, base, ase->name);
else
- as_warn (_("The `%s' extension requires %s%d revision %d or greater"),
+ as_warn (_("the `%s' extension requires %s%d revision %d or greater"),
ase->name, base, size, min_rev);
}
if ((ase->flags & FP64_ASES)
&& (warned_fp32 & ase->flags) != ase->flags)
{
warned_fp32 |= ase->flags;
- as_warn (_("The `%s' extension requires 64-bit FPRs"), ase->name);
+ as_warn (_("the `%s' extension requires 64-bit FPRs"), ase->name);
}
}
insn->cleared_p = 0;
}
+/* Get a list of all the operands in INSN. */
+
+static const struct mips_operand_array *
+insn_operands (const struct mips_cl_insn *insn)
+{
+ if (insn->insn_mo >= &mips_opcodes[0]
+ && insn->insn_mo < &mips_opcodes[NUMOPCODES])
+ return &mips_operands[insn->insn_mo - &mips_opcodes[0]];
+
+ if (insn->insn_mo >= &mips16_opcodes[0]
+ && insn->insn_mo < &mips16_opcodes[bfd_mips16_num_opcodes])
+ return &mips16_operands[insn->insn_mo - &mips16_opcodes[0]];
+
+ if (insn->insn_mo >= µmips_opcodes[0]
+ && insn->insn_mo < µmips_opcodes[bfd_micromips_num_opcodes])
+ return µmips_operands[insn->insn_mo - µmips_opcodes[0]];
+
+ abort ();
+}
+
+/* Get a description of operand OPNO of INSN. */
+
+static const struct mips_operand *
+insn_opno (const struct mips_cl_insn *insn, unsigned opno)
+{
+ const struct mips_operand_array *operands;
+
+ operands = insn_operands (insn);
+ if (opno >= MAX_OPERANDS || !operands->operand[opno])
+ abort ();
+ return operands->operand[opno];
+}
+
/* Install UVAL as the value of OPERAND in INSN. */
static inline void
insn->insn_opcode = mips_insert_operand (operand, insn->insn_opcode, uval);
}
+/* Extract the value of OPERAND from INSN. */
+
+static inline unsigned
+insn_extract_operand (const struct mips_cl_insn *insn,
+ const struct mips_operand *operand)
+{
+ return mips_extract_operand (operand, insn->insn_opcode);
+}
+
/* Record the current MIPS16/microMIPS mode in now_seg. */
static void
}
}
+/* Clear the error in insn_error. */
+
+static void
+clear_insn_error (void)
+{
+ memset (&insn_error, 0, sizeof (insn_error));
+}
+
+/* Possibly record error message MSG for the current instruction.
+ If the error is about a particular argument, ARGNUM is the 1-based
+ number of that argument, otherwise it is 0. FORMAT is the format
+ of MSG. Return true if MSG was used, false if the current message
+ was kept. */
+
+static bfd_boolean
+set_insn_error_format (int argnum, enum mips_insn_error_format format,
+ const char *msg)
+{
+ if (argnum == 0)
+ {
+ /* Give priority to errors against specific arguments, and to
+ the first whole-instruction message. */
+ if (insn_error.msg)
+ return FALSE;
+ }
+ else
+ {
+ /* Keep insn_error if it is against a later argument. */
+ if (argnum < insn_error.min_argnum)
+ return FALSE;
+
+ /* If both errors are against the same argument but are different,
+ give up on reporting a specific error for this argument.
+ See the comment about mips_insn_error for details. */
+ if (argnum == insn_error.min_argnum
+ && insn_error.msg
+ && strcmp (insn_error.msg, msg) != 0)
+ {
+ insn_error.msg = 0;
+ insn_error.min_argnum += 1;
+ return FALSE;
+ }
+ }
+ insn_error.min_argnum = argnum;
+ insn_error.format = format;
+ insn_error.msg = msg;
+ return TRUE;
+}
+
+/* Record an instruction error with no % format fields. ARGNUM and MSG are
+ as for set_insn_error_format. */
+
+static void
+set_insn_error (int argnum, const char *msg)
+{
+ set_insn_error_format (argnum, ERR_FMT_PLAIN, msg);
+}
+
+/* Record an instruction error with one %d field I. ARGNUM and MSG are
+ as for set_insn_error_format. */
+
+static void
+set_insn_error_i (int argnum, const char *msg, int i)
+{
+ if (set_insn_error_format (argnum, ERR_FMT_I, msg))
+ insn_error.u.i = i;
+}
+
+/* Record an instruction error with two %s fields S1 and S2. ARGNUM and MSG
+ are as for set_insn_error_format. */
+
+static void
+set_insn_error_ss (int argnum, const char *msg, const char *s1, const char *s2)
+{
+ if (set_insn_error_format (argnum, ERR_FMT_SS, msg))
+ {
+ insn_error.u.ss[0] = s1;
+ insn_error.u.ss[1] = s2;
+ }
+}
+
+/* Report the error in insn_error, which is against assembly code STR. */
+
+static void
+report_insn_error (const char *str)
+{
+ const char *msg;
+
+ msg = ACONCAT ((insn_error.msg, " `%s'", NULL));
+ switch (insn_error.format)
+ {
+ case ERR_FMT_PLAIN:
+ as_bad (msg, str);
+ break;
+
+ case ERR_FMT_I:
+ as_bad (msg, insn_error.u.i, str);
+ break;
+
+ case ERR_FMT_SS:
+ as_bad (msg, insn_error.u.ss[0], insn_error.u.ss[1], str);
+ break;
+ }
+}
+
/* Initialize vr4120_conflicts. There is a bit of duplication here:
the idea is to make it obvious at a glance that each errata is
included. */
unsigned int num;
};
-#define RTYPE_MASK 0x1ff00
-#define RTYPE_NUM 0x00100
-#define RTYPE_FPU 0x00200
-#define RTYPE_FCC 0x00400
-#define RTYPE_VEC 0x00800
-#define RTYPE_GP 0x01000
-#define RTYPE_CP0 0x02000
-#define RTYPE_PC 0x04000
-#define RTYPE_ACC 0x08000
-#define RTYPE_CCC 0x10000
-#define RNUM_MASK 0x000ff
-#define RWARN 0x80000
+#define RNUM_MASK 0x00000ff
+#define RTYPE_MASK 0x0efff00
+#define RTYPE_NUM 0x0000100
+#define RTYPE_FPU 0x0000200
+#define RTYPE_FCC 0x0000400
+#define RTYPE_VEC 0x0000800
+#define RTYPE_GP 0x0001000
+#define RTYPE_CP0 0x0002000
+#define RTYPE_PC 0x0004000
+#define RTYPE_ACC 0x0008000
+#define RTYPE_CCC 0x0010000
+#define RTYPE_VI 0x0020000
+#define RTYPE_VF 0x0040000
+#define RTYPE_R5900_I 0x0080000
+#define RTYPE_R5900_Q 0x0100000
+#define RTYPE_R5900_R 0x0200000
+#define RTYPE_R5900_ACC 0x0400000
+#define RWARN 0x8000000
#define GENERIC_REGISTER_NUMBERS \
{"$0", RTYPE_NUM | 0}, \
{"$v30", RTYPE_VEC | 30}, \
{"$v31", RTYPE_VEC | 31}
+#define R5900_I_NAMES \
+ {"$I", RTYPE_R5900_I | 0}
+
+#define R5900_Q_NAMES \
+ {"$Q", RTYPE_R5900_Q | 0}
+
+#define R5900_R_NAMES \
+ {"$R", RTYPE_R5900_R | 0}
+
+#define R5900_ACC_NAMES \
+ {"$ACC", RTYPE_R5900_ACC | 0 }
+
#define MIPS_DSP_ACCUMULATOR_NAMES \
{"$ac0", RTYPE_ACC | 0}, \
{"$ac1", RTYPE_ACC | 1}, \
MIPS16_SPECIAL_REGISTER_NAMES,
MDMX_VECTOR_REGISTER_NAMES,
+ R5900_I_NAMES,
+ R5900_Q_NAMES,
+ R5900_R_NAMES,
+ R5900_ACC_NAMES,
MIPS_DSP_ACCUMULATOR_NAMES,
{0, 0}
};
{0, 0}
};
-/* Check if S points at a valid register specifier according to TYPES.
- If so, then return 1, advance S to consume the specifier and store
- the register's number in REGNOP, otherwise return 0. */
+/* Register symbols $v0 and $v1 map to GPRs 2 and 3, but they can also be
+ interpreted as vector registers 0 and 1. If SYMVAL is the value of one
+ of these register symbols, return the associated vector register,
+ otherwise return SYMVAL itself. */
-static int
-reg_lookup (char **s, unsigned int types, unsigned int *regnop)
+static unsigned int
+mips_prefer_vec_regno (unsigned int symval)
{
- symbolS *symbolP;
- char *e;
- char save_c;
- int reg = -1;
+ if ((symval & -2) == (RTYPE_GP | 2))
+ return RTYPE_VEC | (symval & 1);
+ return symval;
+}
- /* Find end of name. */
- e = *s;
- if (is_name_beginner (*e))
- ++e;
- while (is_part_of_name (*e))
- ++e;
+/* Return true if string [S, E) is a valid register name, storing its
+ symbol value in *SYMVAL_PTR if so. */
+
+static bfd_boolean
+mips_parse_register_1 (char *s, char *e, unsigned int *symval_ptr)
+{
+ char save_c;
+ symbolS *symbol;
/* Terminate name. */
save_c = *e;
*e = '\0';
- /* Look for a register symbol. */
- if ((symbolP = symbol_find (*s)) && S_GET_SEGMENT (symbolP) == reg_section)
- {
- int r = S_GET_VALUE (symbolP);
- if (r & types)
- reg = r & RNUM_MASK;
- else if ((types & RTYPE_VEC) && (r & ~1) == (RTYPE_GP | 2))
- /* Convert GP reg $v0/1 to MDMX reg $v0/1! */
- reg = (r & RNUM_MASK) - 2;
- }
- /* Else see if this is a register defined in an itbl entry. */
- else if ((types & RTYPE_GP) && itbl_have_entries)
- {
- char *n = *s;
- unsigned long r;
-
- if (*n == '$')
- ++n;
- if (itbl_get_reg_val (n, &r))
- reg = r & RNUM_MASK;
- }
+ /* Look up the name. */
+ symbol = symbol_find (s);
+ *e = save_c;
- /* Advance to next token if a register was recognised. */
- if (reg >= 0)
- *s = e;
- else if (types & RWARN)
- as_warn (_("Unrecognized register name `%s'"), *s);
+ if (!symbol || S_GET_SEGMENT (symbol) != reg_section)
+ return FALSE;
- *e = save_c;
- if (regnop)
- *regnop = reg;
- return reg >= 0;
+ *symval_ptr = S_GET_VALUE (symbol);
+ return TRUE;
}
-/* Check if S points at a valid register list according to TYPES.
- If so, then return 1, advance S to consume the list and store
- the registers present on the list as a bitmask of ones in REGLISTP,
- otherwise return 0. A valid list comprises a comma-separated
- enumeration of valid single registers and/or dash-separated
- contiguous register ranges as determined by their numbers.
+/* Return true if the string at *SPTR is a valid register name. Allow it
+ to have a VU0-style channel suffix of the form x?y?z?w? if CHANNELS_PTR
+ is nonnull.
- As a special exception if one of s0-s7 registers is specified as
- the range's lower delimiter and s8 (fp) is its upper one, then no
- registers whose numbers place them between s7 and s8 (i.e. $24-$29)
- are selected; they have to be listed separately if needed. */
+ When returning true, move *SPTR past the register, store the
+ register's symbol value in *SYMVAL_PTR and the channel mask in
+ *CHANNELS_PTR (if nonnull). The symbol value includes the register
+ number (RNUM_MASK) and register type (RTYPE_MASK). The channel mask
+ is a 4-bit value of the form XYZW and is 0 if no suffix was given. */
-static int
-reglist_lookup (char **s, unsigned int types, unsigned int *reglistp)
-{
- unsigned int reglist = 0;
- unsigned int lastregno;
- bfd_boolean ok = TRUE;
- unsigned int regmask;
- char *s_endlist = *s;
- char *s_reset = *s;
- unsigned int regno;
+static bfd_boolean
+mips_parse_register (char **sptr, unsigned int *symval_ptr,
+ unsigned int *channels_ptr)
+{
+ char *s, *e, *m;
+ const char *q;
+ unsigned int channels, symval, bit;
+
+ /* Find end of name. */
+ s = e = *sptr;
+ if (is_name_beginner (*e))
+ ++e;
+ while (is_part_of_name (*e))
+ ++e;
- while (reg_lookup (s, types, ®no))
+ channels = 0;
+ if (!mips_parse_register_1 (s, e, &symval))
{
- lastregno = regno;
- if (**s == '-')
- {
- (*s)++;
- ok = reg_lookup (s, types, &lastregno);
- if (ok && lastregno < regno)
- ok = FALSE;
- if (!ok)
- break;
- }
+ if (!channels_ptr)
+ return FALSE;
- if (lastregno == FP && regno >= S0 && regno <= S7)
- {
- lastregno = S7;
- reglist |= 1 << FP;
- }
- regmask = 1 << lastregno;
- regmask = (regmask << 1) - 1;
- regmask ^= (1 << regno) - 1;
- reglist |= regmask;
+ /* Eat characters from the end of the string that are valid
+ channel suffixes. The preceding register must be $ACC or
+ end with a digit, so there is no ambiguity. */
+ bit = 1;
+ m = e;
+ for (q = "wzyx"; *q; q++, bit <<= 1)
+ if (m > s && m[-1] == *q)
+ {
+ --m;
+ channels |= bit;
+ }
- s_endlist = *s;
- if (**s != ',')
- break;
- (*s)++;
+ if (channels == 0
+ || !mips_parse_register_1 (s, m, &symval)
+ || (symval & (RTYPE_VI | RTYPE_VF | RTYPE_R5900_ACC)) == 0)
+ return FALSE;
}
- if (ok)
- *s = s_endlist;
- else
- *s = s_reset;
- if (reglistp)
- *reglistp = reglist;
- return ok && reglist != 0;
+ *sptr = e;
+ *symval_ptr = symval;
+ if (channels_ptr)
+ *channels_ptr = channels;
+ return TRUE;
}
-/* Return TRUE if opcode MO is valid on the currently selected ISA, ASE
- and architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
+/* Check if SPTR points at a valid register specifier according to TYPES.
+ If so, then return 1, advance S to consume the specifier and store
+ the register's number in REGNOP, otherwise return 0. */
-static bfd_boolean
-is_opcode_valid (const struct mips_opcode *mo)
+static int
+reg_lookup (char **s, unsigned int types, unsigned int *regnop)
{
- int isa = mips_opts.isa;
- int ase = mips_opts.ase;
- int fp_s, fp_d;
- unsigned int i;
-
- if (ISA_HAS_64BIT_REGS (mips_opts.isa))
- for (i = 0; i < ARRAY_SIZE (mips_ases); i++)
- if ((ase & mips_ases[i].flags) == mips_ases[i].flags)
- ase |= mips_ases[i].flags64;
-
- if (!opcode_is_member (mo, isa, ase, mips_opts.arch))
- return FALSE;
+ unsigned int regno;
- /* Check whether the instruction or macro requires single-precision or
- double-precision floating-point support. Note that this information is
- stored differently in the opcode table for insns and macros. */
- if (mo->pinfo == INSN_MACRO)
+ if (mips_parse_register (s, ®no, NULL))
{
- fp_s = mo->pinfo2 & INSN2_M_FP_S;
- fp_d = mo->pinfo2 & INSN2_M_FP_D;
+ if (types & RTYPE_VEC)
+ regno = mips_prefer_vec_regno (regno);
+ if (regno & types)
+ regno &= RNUM_MASK;
+ else
+ regno = ~0;
}
else
{
- fp_s = mo->pinfo & FP_S;
- fp_d = mo->pinfo & FP_D;
+ if (types & RWARN)
+ as_warn (_("unrecognized register name `%s'"), *s);
+ regno = ~0;
}
+ if (regnop)
+ *regnop = regno;
+ return regno <= RNUM_MASK;
+}
- if (fp_d && (mips_opts.soft_float || mips_opts.single_float))
- return FALSE;
+/* Parse a VU0 "x?y?z?w?" channel mask at S and store the associated
+ mask in *CHANNELS. Return a pointer to the first unconsumed character. */
- if (fp_s && mips_opts.soft_float)
- return FALSE;
+static char *
+mips_parse_vu0_channels (char *s, unsigned int *channels)
+{
+ unsigned int i;
- return TRUE;
+ *channels = 0;
+ for (i = 0; i < 4; i++)
+ if (*s == "xyzw"[i])
+ {
+ *channels |= 1 << (3 - i);
+ ++s;
+ }
+ return s;
}
-/* Return TRUE if the MIPS16 opcode MO is valid on the currently
- selected ISA and architecture. */
+/* Token types for parsed operand lists. */
+enum mips_operand_token_type {
+ /* A plain register, e.g. $f2. */
+ OT_REG,
-static bfd_boolean
-is_opcode_valid_16 (const struct mips_opcode *mo)
-{
- return opcode_is_member (mo, mips_opts.isa, 0, mips_opts.arch);
-}
+ /* A 4-bit XYZW channel mask. */
+ OT_CHANNELS,
-/* Return TRUE if the size of the microMIPS opcode MO matches one
- explicitly requested. Always TRUE in the standard MIPS mode. */
+ /* An element of a vector, e.g. $v0[1]. */
+ OT_REG_ELEMENT,
-static bfd_boolean
-is_size_valid (const struct mips_opcode *mo)
-{
- if (!mips_opts.micromips)
- return TRUE;
+ /* A continuous range of registers, e.g. $s0-$s4. */
+ OT_REG_RANGE,
- if (mips_opts.insn32)
- {
- if (mo->pinfo != INSN_MACRO && micromips_insn_length (mo) != 4)
- return FALSE;
- if ((mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0)
- return FALSE;
- }
- if (!forced_insn_length)
- return TRUE;
- if (mo->pinfo == INSN_MACRO)
- return FALSE;
- return forced_insn_length == micromips_insn_length (mo);
-}
+ /* A (possibly relocated) expression. */
+ OT_INTEGER,
-/* Return TRUE if the microMIPS opcode MO is valid for the delay slot
- of the preceding instruction. Always TRUE in the standard MIPS mode.
+ /* A floating-point value. */
+ OT_FLOAT,
- We don't accept macros in 16-bit delay slots to avoid a case where
- a macro expansion fails because it relies on a preceding 32-bit real
- instruction to have matched and does not handle the operands correctly.
- The only macros that may expand to 16-bit instructions are JAL that
- cannot be placed in a delay slot anyway, and corner cases of BALIGN
- and BGT (that likewise cannot be placed in a delay slot) that decay to
- a NOP. In all these cases the macros precede any corresponding real
- instruction definitions in the opcode table, so they will match in the
- second pass where the size of the delay slot is ignored and therefore
- produce correct code. */
+ /* A single character. This can be '(', ')' or ',', but '(' only appears
+ before OT_REGs. */
+ OT_CHAR,
-static bfd_boolean
-is_delay_slot_valid (const struct mips_opcode *mo)
+ /* A doubled character, either "--" or "++". */
+ OT_DOUBLE_CHAR,
+
+ /* The end of the operand list. */
+ OT_END
+};
+
+/* A parsed operand token. */
+struct mips_operand_token
{
- if (!mips_opts.micromips)
- return TRUE;
+ /* The type of token. */
+ enum mips_operand_token_type type;
+ union
+ {
+ /* The register symbol value for an OT_REG. */
+ unsigned int regno;
+
+ /* The 4-bit channel mask for an OT_CHANNEL_SUFFIX. */
+ unsigned int channels;
+
+ /* The register symbol value and index for an OT_REG_ELEMENT. */
+ struct {
+ unsigned int regno;
+ addressT index;
+ } reg_element;
+
+ /* The two register symbol values involved in an OT_REG_RANGE. */
+ struct {
+ unsigned int regno1;
+ unsigned int regno2;
+ } reg_range;
+
+ /* The value of an OT_INTEGER. The value is represented as an
+ expression and the relocation operators that were applied to
+ that expression. The reloc entries are BFD_RELOC_UNUSED if no
+ relocation operators were used. */
+ struct {
+ expressionS value;
+ bfd_reloc_code_real_type relocs[3];
+ } integer;
+
+ /* The binary data for an OT_FLOAT constant, and the number of bytes
+ in the constant. */
+ struct {
+ unsigned char data[8];
+ int length;
+ } flt;
+
+ /* The character represented by an OT_CHAR or OT_DOUBLE_CHAR. */
+ char ch;
+ } u;
+};
- if (mo->pinfo == INSN_MACRO)
- return (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) == 0;
- if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
- && micromips_insn_length (mo) != 4)
- return FALSE;
- if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0
- && micromips_insn_length (mo) != 2)
- return FALSE;
+/* An obstack used to construct lists of mips_operand_tokens. */
+static struct obstack mips_operand_tokens;
- return TRUE;
+/* Give TOKEN type TYPE and add it to mips_operand_tokens. */
+
+static void
+mips_add_token (struct mips_operand_token *token,
+ enum mips_operand_token_type type)
+{
+ token->type = type;
+ obstack_grow (&mips_operand_tokens, token, sizeof (*token));
}
-/* For consistency checking, verify that all bits of OPCODE are
- specified either by the match/mask part of the instruction
- definition, or by the operand list. INSN_BITS says which
- bits of the instruction are significant and DECODE_OPERAND
- provides the mips_operand description of each operand. */
+/* Check whether S is '(' followed by a register name. Add OT_CHAR
+ and OT_REG tokens for them if so, and return a pointer to the first
+ unconsumed character. Return null otherwise. */
-static int
-validate_mips_insn (const struct mips_opcode *opcode,
- unsigned long insn_bits,
- const struct mips_operand *(*decode_operand) (const char *))
+static char *
+mips_parse_base_start (char *s)
{
- const char *s;
- unsigned long used_bits, doubled, undefined;
- const struct mips_operand *operand;
+ struct mips_operand_token token;
+ unsigned int regno, channels;
+ bfd_boolean decrement_p;
+
+ if (*s != '(')
+ return 0;
+
+ ++s;
+ SKIP_SPACE_TABS (s);
- if ((opcode->mask & opcode->match) != opcode->match)
+ /* Only match "--" as part of a base expression. In other contexts "--X"
+ is a double negative. */
+ decrement_p = (s[0] == '-' && s[1] == '-');
+ if (decrement_p)
{
- as_bad (_("internal: bad mips opcode (mask error): %s %s"),
+ s += 2;
+ SKIP_SPACE_TABS (s);
+ }
+
+ /* Allow a channel specifier because that leads to better error messages
+ than treating something like "$vf0x++" as an expression. */
+ if (!mips_parse_register (&s, ®no, &channels))
+ return 0;
+
+ token.u.ch = '(';
+ mips_add_token (&token, OT_CHAR);
+
+ if (decrement_p)
+ {
+ token.u.ch = '-';
+ mips_add_token (&token, OT_DOUBLE_CHAR);
+ }
+
+ token.u.regno = regno;
+ mips_add_token (&token, OT_REG);
+
+ if (channels)
+ {
+ token.u.channels = channels;
+ mips_add_token (&token, OT_CHANNELS);
+ }
+
+ /* For consistency, only match "++" as part of base expressions too. */
+ SKIP_SPACE_TABS (s);
+ if (s[0] == '+' && s[1] == '+')
+ {
+ s += 2;
+ token.u.ch = '+';
+ mips_add_token (&token, OT_DOUBLE_CHAR);
+ }
+
+ return s;
+}
+
+/* Parse one or more tokens from S. Return a pointer to the first
+ unconsumed character on success. Return null if an error was found
+ and store the error text in insn_error. FLOAT_FORMAT is as for
+ mips_parse_arguments. */
+
+static char *
+mips_parse_argument_token (char *s, char float_format)
+{
+ char *end, *save_in, *err;
+ unsigned int regno1, regno2, channels;
+ struct mips_operand_token token;
+
+ /* First look for "($reg", since we want to treat that as an
+ OT_CHAR and OT_REG rather than an expression. */
+ end = mips_parse_base_start (s);
+ if (end)
+ return end;
+
+ /* Handle other characters that end up as OT_CHARs. */
+ if (*s == ')' || *s == ',')
+ {
+ token.u.ch = *s;
+ mips_add_token (&token, OT_CHAR);
+ ++s;
+ return s;
+ }
+
+ /* Handle tokens that start with a register. */
+ if (mips_parse_register (&s, ®no1, &channels))
+ {
+ if (channels)
+ {
+ /* A register and a VU0 channel suffix. */
+ token.u.regno = regno1;
+ mips_add_token (&token, OT_REG);
+
+ token.u.channels = channels;
+ mips_add_token (&token, OT_CHANNELS);
+ return s;
+ }
+
+ SKIP_SPACE_TABS (s);
+ if (*s == '-')
+ {
+ /* A register range. */
+ ++s;
+ SKIP_SPACE_TABS (s);
+ if (!mips_parse_register (&s, ®no2, NULL))
+ {
+ set_insn_error (0, _("invalid register range"));
+ return 0;
+ }
+
+ token.u.reg_range.regno1 = regno1;
+ token.u.reg_range.regno2 = regno2;
+ mips_add_token (&token, OT_REG_RANGE);
+ return s;
+ }
+ else if (*s == '[')
+ {
+ /* A vector element. */
+ expressionS element;
+
+ ++s;
+ SKIP_SPACE_TABS (s);
+ my_getExpression (&element, s);
+ if (element.X_op != O_constant)
+ {
+ set_insn_error (0, _("vector element must be constant"));
+ return 0;
+ }
+ s = expr_end;
+ SKIP_SPACE_TABS (s);
+ if (*s != ']')
+ {
+ set_insn_error (0, _("missing `]'"));
+ return 0;
+ }
+ ++s;
+
+ token.u.reg_element.regno = regno1;
+ token.u.reg_element.index = element.X_add_number;
+ mips_add_token (&token, OT_REG_ELEMENT);
+ return s;
+ }
+
+ /* Looks like just a plain register. */
+ token.u.regno = regno1;
+ mips_add_token (&token, OT_REG);
+ return s;
+ }
+
+ if (float_format)
+ {
+ /* First try to treat expressions as floats. */
+ save_in = input_line_pointer;
+ input_line_pointer = s;
+ err = md_atof (float_format, (char *) token.u.flt.data,
+ &token.u.flt.length);
+ end = input_line_pointer;
+ input_line_pointer = save_in;
+ if (err && *err)
+ {
+ set_insn_error (0, err);
+ return 0;
+ }
+ if (s != end)
+ {
+ mips_add_token (&token, OT_FLOAT);
+ return end;
+ }
+ }
+
+ /* Treat everything else as an integer expression. */
+ token.u.integer.relocs[0] = BFD_RELOC_UNUSED;
+ token.u.integer.relocs[1] = BFD_RELOC_UNUSED;
+ token.u.integer.relocs[2] = BFD_RELOC_UNUSED;
+ my_getSmallExpression (&token.u.integer.value, token.u.integer.relocs, s);
+ s = expr_end;
+ mips_add_token (&token, OT_INTEGER);
+ return s;
+}
+
+/* S points to the operand list for an instruction. FLOAT_FORMAT is 'f'
+ if expressions should be treated as 32-bit floating-point constants,
+ 'd' if they should be treated as 64-bit floating-point constants,
+ or 0 if they should be treated as integer expressions (the usual case).
+
+ Return a list of tokens on success, otherwise return 0. The caller
+ must obstack_free the list after use. */
+
+static struct mips_operand_token *
+mips_parse_arguments (char *s, char float_format)
+{
+ struct mips_operand_token token;
+
+ SKIP_SPACE_TABS (s);
+ while (*s)
+ {
+ s = mips_parse_argument_token (s, float_format);
+ if (!s)
+ {
+ obstack_free (&mips_operand_tokens,
+ obstack_finish (&mips_operand_tokens));
+ return 0;
+ }
+ SKIP_SPACE_TABS (s);
+ }
+ mips_add_token (&token, OT_END);
+ return (struct mips_operand_token *) obstack_finish (&mips_operand_tokens);
+}
+
+/* Return TRUE if opcode MO is valid on the currently selected ISA, ASE
+ and architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
+
+static bfd_boolean
+is_opcode_valid (const struct mips_opcode *mo)
+{
+ int isa = mips_opts.isa;
+ int ase = mips_opts.ase;
+ int fp_s, fp_d;
+ unsigned int i;
+
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
+ for (i = 0; i < ARRAY_SIZE (mips_ases); i++)
+ if ((ase & mips_ases[i].flags) == mips_ases[i].flags)
+ ase |= mips_ases[i].flags64;
+
+ if (!opcode_is_member (mo, isa, ase, mips_opts.arch))
+ return FALSE;
+
+ /* Check whether the instruction or macro requires single-precision or
+ double-precision floating-point support. Note that this information is
+ stored differently in the opcode table for insns and macros. */
+ if (mo->pinfo == INSN_MACRO)
+ {
+ fp_s = mo->pinfo2 & INSN2_M_FP_S;
+ fp_d = mo->pinfo2 & INSN2_M_FP_D;
+ }
+ else
+ {
+ fp_s = mo->pinfo & FP_S;
+ fp_d = mo->pinfo & FP_D;
+ }
+
+ if (fp_d && (mips_opts.soft_float || mips_opts.single_float))
+ return FALSE;
+
+ if (fp_s && mips_opts.soft_float)
+ return FALSE;
+
+ return TRUE;
+}
+
+/* Return TRUE if the MIPS16 opcode MO is valid on the currently
+ selected ISA and architecture. */
+
+static bfd_boolean
+is_opcode_valid_16 (const struct mips_opcode *mo)
+{
+ return opcode_is_member (mo, mips_opts.isa, 0, mips_opts.arch);
+}
+
+/* Return TRUE if the size of the microMIPS opcode MO matches one
+ explicitly requested. Always TRUE in the standard MIPS mode. */
+
+static bfd_boolean
+is_size_valid (const struct mips_opcode *mo)
+{
+ if (!mips_opts.micromips)
+ return TRUE;
+
+ if (mips_opts.insn32)
+ {
+ if (mo->pinfo != INSN_MACRO && micromips_insn_length (mo) != 4)
+ return FALSE;
+ if ((mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0)
+ return FALSE;
+ }
+ if (!forced_insn_length)
+ return TRUE;
+ if (mo->pinfo == INSN_MACRO)
+ return FALSE;
+ return forced_insn_length == micromips_insn_length (mo);
+}
+
+/* Return TRUE if the microMIPS opcode MO is valid for the delay slot
+ of the preceding instruction. Always TRUE in the standard MIPS mode.
+
+ We don't accept macros in 16-bit delay slots to avoid a case where
+ a macro expansion fails because it relies on a preceding 32-bit real
+ instruction to have matched and does not handle the operands correctly.
+ The only macros that may expand to 16-bit instructions are JAL that
+ cannot be placed in a delay slot anyway, and corner cases of BALIGN
+ and BGT (that likewise cannot be placed in a delay slot) that decay to
+ a NOP. In all these cases the macros precede any corresponding real
+ instruction definitions in the opcode table, so they will match in the
+ second pass where the size of the delay slot is ignored and therefore
+ produce correct code. */
+
+static bfd_boolean
+is_delay_slot_valid (const struct mips_opcode *mo)
+{
+ if (!mips_opts.micromips)
+ return TRUE;
+
+ if (mo->pinfo == INSN_MACRO)
+ return (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) == 0;
+ if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
+ && micromips_insn_length (mo) != 4)
+ return FALSE;
+ if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0
+ && micromips_insn_length (mo) != 2)
+ return FALSE;
+
+ return TRUE;
+}
+
+/* For consistency checking, verify that all bits of OPCODE are specified
+ either by the match/mask part of the instruction definition, or by the
+ operand list. Also build up a list of operands in OPERANDS.
+
+ INSN_BITS says which bits of the instruction are significant.
+ If OPCODE is a standard or microMIPS instruction, DECODE_OPERAND
+ provides the mips_operand description of each operand. DECODE_OPERAND
+ is null for MIPS16 instructions. */
+
+static int
+validate_mips_insn (const struct mips_opcode *opcode,
+ unsigned long insn_bits,
+ const struct mips_operand *(*decode_operand) (const char *),
+ struct mips_operand_array *operands)
+{
+ const char *s;
+ unsigned long used_bits, doubled, undefined, opno, mask;
+ const struct mips_operand *operand;
+
+ mask = (opcode->pinfo == INSN_MACRO ? 0 : opcode->mask);
+ if ((mask & opcode->match) != opcode->match)
+ {
+ as_bad (_("internal: bad mips opcode (mask error): %s %s"),
opcode->name, opcode->args);
return 0;
}
used_bits = 0;
+ opno = 0;
+ if (opcode->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX)
+ used_bits = mips_insert_operand (&mips_vu0_channel_mask, used_bits, -1);
for (s = opcode->args; *s; ++s)
switch (*s)
{
case ')':
break;
+ case '#':
+ s++;
+ break;
+
default:
- operand = decode_operand (s);
- if (!operand)
+ if (!decode_operand)
+ operand = decode_mips16_operand (*s, FALSE);
+ else
+ operand = decode_operand (s);
+ if (!operand && opcode->pinfo != INSN_MACRO)
{
as_bad (_("internal: unknown operand type: %s %s"),
opcode->name, opcode->args);
return 0;
}
- used_bits |= ((1 << operand->size) - 1) << operand->lsb;
- if (operand->type == OP_MDMX_IMM_REG)
- /* Bit 5 is the format selector (OB vs QH). The opcode table
- has separate entries for each format. */
- used_bits &= ~(1 << (operand->lsb + 5));
+ gas_assert (opno < MAX_OPERANDS);
+ operands->operand[opno] = operand;
+ if (operand && operand->type != OP_VU0_MATCH_SUFFIX)
+ {
+ used_bits = mips_insert_operand (operand, used_bits, -1);
+ if (operand->type == OP_MDMX_IMM_REG)
+ /* Bit 5 is the format selector (OB vs QH). The opcode table
+ has separate entries for each format. */
+ used_bits &= ~(1 << (operand->lsb + 5));
+ if (operand->type == OP_ENTRY_EXIT_LIST)
+ used_bits &= ~(mask & 0x700);
+ }
/* Skip prefix characters. */
- if (*s == '+' || *s == 'm')
+ if (decode_operand && (*s == '+' || *s == 'm'))
++s;
+ opno += 1;
break;
}
- doubled = used_bits & opcode->mask & insn_bits;
+ doubled = used_bits & mask & insn_bits;
if (doubled)
{
as_bad (_("internal: bad mips opcode (bits 0x%08lx doubly defined):"
" %s %s"), doubled, opcode->name, opcode->args);
return 0;
}
- used_bits |= opcode->mask;
+ used_bits |= mask;
undefined = ~used_bits & insn_bits;
- if (undefined)
+ if (opcode->pinfo != INSN_MACRO && undefined)
{
as_bad (_("internal: bad mips opcode (bits 0x%08lx undefined): %s %s"),
undefined, opcode->name, opcode->args);
return 1;
}
+/* The MIPS16 version of validate_mips_insn. */
+
+static int
+validate_mips16_insn (const struct mips_opcode *opcode,
+ struct mips_operand_array *operands)
+{
+ if (opcode->args[0] == 'a' || opcode->args[0] == 'i')
+ {
+ /* In this case OPCODE defines the first 16 bits in a 32-bit jump
+ instruction. Use TMP to describe the full instruction. */
+ struct mips_opcode tmp;
+
+ tmp = *opcode;
+ tmp.match <<= 16;
+ tmp.mask <<= 16;
+ return validate_mips_insn (&tmp, 0xffffffff, 0, operands);
+ }
+ return validate_mips_insn (opcode, 0xffff, 0, operands);
+}
+
/* The microMIPS version of validate_mips_insn. */
static int
-validate_micromips_insn (const struct mips_opcode *opc)
+validate_micromips_insn (const struct mips_opcode *opc,
+ struct mips_operand_array *operands)
{
unsigned long insn_bits;
unsigned long major;
unsigned int length;
+ if (opc->pinfo == INSN_MACRO)
+ return validate_mips_insn (opc, 0xffffffff, decode_micromips_operand,
+ operands);
+
length = micromips_insn_length (opc);
if (length != 2 && length != 4)
{
- as_bad (_("Internal error: bad microMIPS opcode (incorrect length: %u): "
+ as_bad (_("internal error: bad microMIPS opcode (incorrect length: %u): "
"%s %s"), length, opc->name, opc->args);
return 0;
}
if ((length == 2 && (major & 7) != 1 && (major & 6) != 2)
|| (length == 4 && (major & 7) != 0 && (major & 4) != 4))
{
- as_bad (_("Internal error: bad microMIPS opcode "
+ as_bad (_("internal error: bad microMIPS opcode "
"(opcode/length mismatch): %s %s"), opc->name, opc->args);
return 0;
}
insn_bits = 1 << 4 * length;
insn_bits <<= 4 * length;
insn_bits -= 1;
- return validate_mips_insn (opc, insn_bits, decode_micromips_operand);
+ return validate_mips_insn (opc, insn_bits, decode_micromips_operand,
+ operands);
}
/* This function is called once, at assembler startup time. It should set up
}
if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_arch))
- as_warn (_("Could not set architecture and machine"));
+ as_warn (_("could not set architecture and machine"));
op_hash = hash_new ();
+ mips_operands = XCNEWVEC (struct mips_operand_array, NUMOPCODES);
for (i = 0; i < NUMOPCODES;)
{
const char *name = mips_opcodes[i].name;
fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
mips_opcodes[i].name, retval);
/* Probably a memory allocation problem? Give up now. */
- as_fatal (_("Broken assembler. No assembly attempted."));
+ as_fatal (_("broken assembler, no assembly attempted"));
}
do
{
- if (mips_opcodes[i].pinfo != INSN_MACRO)
+ if (!validate_mips_insn (&mips_opcodes[i], 0xffffffff,
+ decode_mips_operand, &mips_operands[i]))
+ broken = 1;
+ if (nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
{
- if (!validate_mips_insn (&mips_opcodes[i], 0xffffffff,
- decode_mips_operand))
- broken = 1;
- if (nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
- {
- create_insn (&nop_insn, mips_opcodes + i);
- if (mips_fix_loongson2f_nop)
- nop_insn.insn_opcode = LOONGSON2F_NOP_INSN;
- nop_insn.fixed_p = 1;
- }
+ create_insn (&nop_insn, mips_opcodes + i);
+ if (mips_fix_loongson2f_nop)
+ nop_insn.insn_opcode = LOONGSON2F_NOP_INSN;
+ nop_insn.fixed_p = 1;
}
++i;
}
}
mips16_op_hash = hash_new ();
+ mips16_operands = XCNEWVEC (struct mips_operand_array,
+ bfd_mips16_num_opcodes);
i = 0;
while (i < bfd_mips16_num_opcodes)
mips16_opcodes[i].name, retval);
do
{
- if (mips16_opcodes[i].pinfo != INSN_MACRO
- && ((mips16_opcodes[i].match & mips16_opcodes[i].mask)
- != mips16_opcodes[i].match))
- {
- fprintf (stderr, _("internal error: bad mips16 opcode: %s %s\n"),
- mips16_opcodes[i].name, mips16_opcodes[i].args);
- broken = 1;
- }
+ if (!validate_mips16_insn (&mips16_opcodes[i], &mips16_operands[i]))
+ broken = 1;
if (mips16_nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0)
{
create_insn (&mips16_nop_insn, mips16_opcodes + i);
}
micromips_op_hash = hash_new ();
+ micromips_operands = XCNEWVEC (struct mips_operand_array,
+ bfd_micromips_num_opcodes);
i = 0;
while (i < bfd_micromips_num_opcodes)
as_fatal (_("internal: can't hash `%s': %s"),
micromips_opcodes[i].name, retval);
do
- if (micromips_opcodes[i].pinfo != INSN_MACRO)
- {
- struct mips_cl_insn *micromips_nop_insn;
+ {
+ struct mips_cl_insn *micromips_nop_insn;
- if (!validate_micromips_insn (µmips_opcodes[i]))
- broken = 1;
+ if (!validate_micromips_insn (µmips_opcodes[i],
+ µmips_operands[i]))
+ broken = 1;
- if (micromips_insn_length (micromips_opcodes + i) == 2)
- micromips_nop_insn = µmips_nop16_insn;
- else if (micromips_insn_length (micromips_opcodes + i) == 4)
- micromips_nop_insn = µmips_nop32_insn;
- else
- continue;
+ if (micromips_opcodes[i].pinfo != INSN_MACRO)
+ {
+ if (micromips_insn_length (micromips_opcodes + i) == 2)
+ micromips_nop_insn = µmips_nop16_insn;
+ else if (micromips_insn_length (micromips_opcodes + i) == 4)
+ micromips_nop_insn = µmips_nop32_insn;
+ else
+ continue;
- if (micromips_nop_insn->insn_mo == NULL
- && strcmp (name, "nop") == 0)
- {
- create_insn (micromips_nop_insn, micromips_opcodes + i);
- micromips_nop_insn->fixed_p = 1;
- }
- }
+ if (micromips_nop_insn->insn_mo == NULL
+ && strcmp (name, "nop") == 0)
+ {
+ create_insn (micromips_nop_insn, micromips_opcodes + i);
+ micromips_nop_insn->fixed_p = 1;
+ }
+ }
+ }
while (++i < bfd_micromips_num_opcodes
&& strcmp (micromips_opcodes[i].name, name) == 0);
}
if (broken)
- as_fatal (_("Broken assembler. No assembly attempted."));
+ as_fatal (_("broken assembler, no assembly attempted"));
/* We add all the general register names to the symbol table. This
helps us detect invalid uses of them. */
reg_names_o32[i].num, /* & RNUM_MASK, */
&zero_address_frag));
+ for (i = 0; i < 32; i++)
+ {
+ char regname[7];
+
+ /* R5900 VU0 floating-point register. */
+ regname[sizeof (rename) - 1] = 0;
+ snprintf (regname, sizeof (regname) - 1, "$vf%d", i);
+ symbol_table_insert (symbol_new (regname, reg_section,
+ RTYPE_VF | i, &zero_address_frag));
+
+ /* R5900 VU0 integer register. */
+ snprintf (regname, sizeof (regname) - 1, "$vi%d", i);
+ symbol_table_insert (symbol_new (regname, reg_section,
+ RTYPE_VI | i, &zero_address_frag));
+
+ }
+
+ obstack_init (&mips_operand_tokens);
+
mips_no_prev_insn ();
mips_gprmask = 0;
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
imm_expr.X_op = O_absent;
- imm2_expr.X_op = O_absent;
offset_expr.X_op = O_absent;
offset_reloc[0] = BFD_RELOC_UNUSED;
offset_reloc[1] = BFD_RELOC_UNUSED;
mips_mark_labels ();
mips_assembling_insn = TRUE;
+ clear_insn_error ();
if (mips_opts.mips16)
mips16_ip (str, &insn);
str, insn.insn_opcode));
}
- if (insn_error)
- as_bad ("%s `%s'", insn_error, str);
+ if (insn_error.msg)
+ report_insn_error (str);
else if (insn.insn_mo->pinfo == INSN_MACRO)
{
macro_start ();
&& fixp->fx_offset == fixp->fx_next->fx_offset);
}
-/* This function returns true if modifying a register requires a
- delay. */
-
-static int
-reg_needs_delay (unsigned int reg)
-{
- unsigned long prev_pinfo;
-
- prev_pinfo = history[0].insn_mo->pinfo;
- if (! mips_opts.noreorder
- && (((prev_pinfo & INSN_LOAD_MEMORY_DELAY)
- && ! gpr_interlocks)
- || ((prev_pinfo & INSN_LOAD_COPROC_DELAY)
- && ! cop_interlocks)))
- {
- /* A load from a coprocessor or from memory. All load delays
- delay the use of general register rt for one instruction. */
- /* Itbl support may require additional care here. */
- know (prev_pinfo & INSN_WRITE_GPR_T);
- if (reg == EXTRACT_OPERAND (mips_opts.micromips, RT, history[0]))
- return 1;
- }
-
- return 0;
-}
-
/* Move all labels in LABELS to the current insertion point. TEXT_P
says whether the labels refer to text or data. */
static inline bfd_boolean
compact_branch_p (const struct mips_cl_insn *ip)
{
- if (mips_opts.mips16)
- return (ip->insn_mo->pinfo & (MIPS16_INSN_UNCOND_BRANCH
- | MIPS16_INSN_COND_BRANCH)) != 0;
- else
- return (ip->insn_mo->pinfo2 & (INSN2_UNCOND_BRANCH
- | INSN2_COND_BRANCH)) != 0;
+ return (ip->insn_mo->pinfo2 & (INSN2_UNCOND_BRANCH
+ | INSN2_COND_BRANCH)) != 0;
}
/* Return true if IP is an unconditional branch or jump. */
uncond_branch_p (const struct mips_cl_insn *ip)
{
return ((ip->insn_mo->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0
- || (mips_opts.mips16
- ? (ip->insn_mo->pinfo & MIPS16_INSN_UNCOND_BRANCH) != 0
- : (ip->insn_mo->pinfo2 & INSN2_UNCOND_BRANCH) != 0));
+ || (ip->insn_mo->pinfo2 & INSN2_UNCOND_BRANCH) != 0);
}
/* Return true if IP is a branch-likely instruction. */
return NOP_INSN;
}
-/* Return the mask of core registers that IP reads or writes. */
+/* Return a mask that has bit N set if OPCODE reads the register(s)
+ in operand N. */
static unsigned int
-gpr_mod_mask (const struct mips_cl_insn *ip)
+insn_read_mask (const struct mips_opcode *opcode)
{
- unsigned long pinfo2;
- unsigned int mask;
+ return (opcode->pinfo & INSN_READ_ALL) >> INSN_READ_SHIFT;
+}
- mask = 0;
- pinfo2 = ip->insn_mo->pinfo2;
- if (mips_opts.micromips)
+/* Return a mask that has bit N set if OPCODE writes to the register(s)
+ in operand N. */
+
+static unsigned int
+insn_write_mask (const struct mips_opcode *opcode)
+{
+ return (opcode->pinfo & INSN_WRITE_ALL) >> INSN_WRITE_SHIFT;
+}
+
+/* Return a mask of the registers specified by operand OPERAND of INSN.
+ Ignore registers of type OP_REG_<t> unless bit OP_REG_<t> of TYPE_MASK
+ is set. */
+
+static unsigned int
+operand_reg_mask (const struct mips_cl_insn *insn,
+ const struct mips_operand *operand,
+ unsigned int type_mask)
+{
+ unsigned int uval, vsel;
+
+ switch (operand->type)
+ {
+ case OP_INT:
+ case OP_MAPPED_INT:
+ case OP_MSB:
+ case OP_PCREL:
+ case OP_PERF_REG:
+ case OP_ADDIUSP_INT:
+ case OP_ENTRY_EXIT_LIST:
+ case OP_REPEAT_DEST_REG:
+ case OP_REPEAT_PREV_REG:
+ case OP_PC:
+ case OP_VU0_SUFFIX:
+ case OP_VU0_MATCH_SUFFIX:
+ abort ();
+
+ case OP_REG:
+ case OP_OPTIONAL_REG:
+ {
+ const struct mips_reg_operand *reg_op;
+
+ reg_op = (const struct mips_reg_operand *) operand;
+ if (!(type_mask & (1 << reg_op->reg_type)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ return 1 << mips_decode_reg_operand (reg_op, uval);
+ }
+
+ case OP_REG_PAIR:
+ {
+ const struct mips_reg_pair_operand *pair_op;
+
+ pair_op = (const struct mips_reg_pair_operand *) operand;
+ if (!(type_mask & (1 << pair_op->reg_type)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ return (1 << pair_op->reg1_map[uval]) | (1 << pair_op->reg2_map[uval]);
+ }
+
+ case OP_CLO_CLZ_DEST:
+ if (!(type_mask & (1 << OP_REG_GP)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ return (1 << (uval & 31)) | (1 << (uval >> 5));
+
+ case OP_LWM_SWM_LIST:
+ abort ();
+
+ case OP_SAVE_RESTORE_LIST:
+ abort ();
+
+ case OP_MDMX_IMM_REG:
+ if (!(type_mask & (1 << OP_REG_VEC)))
+ return 0;
+ uval = insn_extract_operand (insn, operand);
+ vsel = uval >> 5;
+ if ((vsel & 0x18) == 0x18)
+ return 0;
+ return 1 << (uval & 31);
+ }
+ abort ();
+}
+
+/* Return a mask of the registers specified by operands OPNO_MASK of INSN,
+ where bit N of OPNO_MASK is set if operand N should be included.
+ Ignore registers of type OP_REG_<t> unless bit OP_REG_<t> of TYPE_MASK
+ is set. */
+
+static unsigned int
+insn_reg_mask (const struct mips_cl_insn *insn,
+ unsigned int type_mask, unsigned int opno_mask)
+{
+ unsigned int opno, reg_mask;
+
+ opno = 0;
+ reg_mask = 0;
+ while (opno_mask != 0)
{
- if (pinfo2 & INSN2_MOD_GPR_MD)
- mask |= 1 << micromips_to_32_reg_d_map[EXTRACT_OPERAND (1, MD, *ip)];
- if (pinfo2 & INSN2_MOD_GPR_MF)
- mask |= 1 << micromips_to_32_reg_f_map[EXTRACT_OPERAND (1, MF, *ip)];
- if (pinfo2 & INSN2_MOD_SP)
- mask |= 1 << SP;
+ if (opno_mask & 1)
+ reg_mask |= operand_reg_mask (insn, insn_opno (insn, opno), type_mask);
+ opno_mask >>= 1;
+ opno += 1;
}
- return mask;
+ return reg_mask;
}
/* Return the mask of core registers that IP reads. */
unsigned long pinfo, pinfo2;
unsigned int mask;
- mask = gpr_mod_mask (ip);
+ mask = insn_reg_mask (ip, 1 << OP_REG_GP, insn_read_mask (ip->insn_mo));
pinfo = ip->insn_mo->pinfo;
pinfo2 = ip->insn_mo->pinfo2;
- if (mips_opts.mips16)
- {
- if (pinfo & MIPS16_INSN_READ_X)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)];
- if (pinfo & MIPS16_INSN_READ_Y)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)];
- if (pinfo & MIPS16_INSN_READ_T)
- mask |= 1 << TREG;
- if (pinfo & MIPS16_INSN_READ_SP)
- mask |= 1 << SP;
- if (pinfo & MIPS16_INSN_READ_31)
- mask |= 1 << RA;
- if (pinfo & MIPS16_INSN_READ_Z)
- mask |= 1 << (mips16_to_32_reg_map
- [MIPS16_EXTRACT_OPERAND (MOVE32Z, *ip)]);
- if (pinfo & MIPS16_INSN_READ_GPR_X)
- mask |= 1 << MIPS16_EXTRACT_OPERAND (REGR32, *ip);
- }
- else
- {
- if (pinfo2 & INSN2_READ_GPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
- if (pinfo & INSN_READ_GPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
- if (pinfo & INSN_READ_GPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
- if (pinfo2 & INSN2_READ_GP)
- mask |= 1 << GP;
- if (pinfo2 & INSN2_READ_GPR_31)
- mask |= 1 << RA;
- if (pinfo2 & INSN2_READ_GPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RZ, *ip);
- }
- if (mips_opts.micromips)
- {
- if (pinfo2 & INSN2_READ_GPR_MC)
- mask |= 1 << micromips_to_32_reg_c_map[EXTRACT_OPERAND (1, MC, *ip)];
- if (pinfo2 & INSN2_READ_GPR_ME)
- mask |= 1 << micromips_to_32_reg_e_map[EXTRACT_OPERAND (1, ME, *ip)];
- if (pinfo2 & INSN2_READ_GPR_MG)
- mask |= 1 << micromips_to_32_reg_g_map[EXTRACT_OPERAND (1, MG, *ip)];
- if (pinfo2 & INSN2_READ_GPR_MJ)
- mask |= 1 << EXTRACT_OPERAND (1, MJ, *ip);
- if (pinfo2 & INSN2_READ_GPR_MMN)
- {
- mask |= 1 << micromips_to_32_reg_m_map[EXTRACT_OPERAND (1, MM, *ip)];
- mask |= 1 << micromips_to_32_reg_n_map[EXTRACT_OPERAND (1, MN, *ip)];
- }
- if (pinfo2 & INSN2_READ_GPR_MP)
- mask |= 1 << EXTRACT_OPERAND (1, MP, *ip);
- if (pinfo2 & INSN2_READ_GPR_MQ)
- mask |= 1 << micromips_to_32_reg_q_map[EXTRACT_OPERAND (1, MQ, *ip)];
- }
+ if (pinfo & INSN_UDI)
+ {
+ /* UDI instructions have traditionally been assumed to read RS
+ and RT. */
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
+ }
+ if (pinfo & INSN_READ_GPR_24)
+ mask |= 1 << 24;
+ if (pinfo2 & INSN2_READ_GPR_16)
+ mask |= 1 << 16;
+ if (pinfo2 & INSN2_READ_SP)
+ mask |= 1 << SP;
+ if (pinfo2 & INSN2_READ_GPR_31)
+ mask |= 1 << 31;
/* Don't include register 0. */
return mask & ~1;
}
unsigned long pinfo, pinfo2;
unsigned int mask;
- mask = gpr_mod_mask (ip);
+ mask = insn_reg_mask (ip, 1 << OP_REG_GP, insn_write_mask (ip->insn_mo));
pinfo = ip->insn_mo->pinfo;
pinfo2 = ip->insn_mo->pinfo2;
- if (mips_opts.mips16)
- {
- if (pinfo & MIPS16_INSN_WRITE_X)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RX, *ip)];
- if (pinfo & MIPS16_INSN_WRITE_Y)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RY, *ip)];
- if (pinfo & MIPS16_INSN_WRITE_Z)
- mask |= 1 << mips16_to_32_reg_map[MIPS16_EXTRACT_OPERAND (RZ, *ip)];
- if (pinfo & MIPS16_INSN_WRITE_T)
- mask |= 1 << TREG;
- if (pinfo & MIPS16_INSN_WRITE_SP)
- mask |= 1 << SP;
- if (pinfo & MIPS16_INSN_WRITE_31)
- mask |= 1 << RA;
- if (pinfo & MIPS16_INSN_WRITE_GPR_Y)
- mask |= 1 << MIPS16OP_EXTRACT_REG32R (ip->insn_opcode);
- }
- else
- {
- if (pinfo & INSN_WRITE_GPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
- if (pinfo & INSN_WRITE_GPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
- if (pinfo & INSN_WRITE_GPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
- if (pinfo & INSN_WRITE_GPR_31)
- mask |= 1 << RA;
- if (pinfo2 & INSN2_WRITE_GPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RZ, *ip);
- }
- if (mips_opts.micromips)
- {
- if (pinfo2 & INSN2_WRITE_GPR_MB)
- mask |= 1 << micromips_to_32_reg_b_map[EXTRACT_OPERAND (1, MB, *ip)];
- if (pinfo2 & INSN2_WRITE_GPR_MH)
- {
- mask |= 1 << micromips_to_32_reg_h_map1[EXTRACT_OPERAND (1, MH, *ip)];
- mask |= 1 << micromips_to_32_reg_h_map2[EXTRACT_OPERAND (1, MH, *ip)];
- }
- if (pinfo2 & INSN2_WRITE_GPR_MJ)
- mask |= 1 << EXTRACT_OPERAND (1, MJ, *ip);
- if (pinfo2 & INSN2_WRITE_GPR_MP)
- mask |= 1 << EXTRACT_OPERAND (1, MP, *ip);
- }
+ if (pinfo & INSN_WRITE_GPR_24)
+ mask |= 1 << 24;
+ if (pinfo & INSN_WRITE_GPR_31)
+ mask |= 1 << 31;
+ if (pinfo & INSN_UDI)
+ /* UDI instructions have traditionally been assumed to write to RD. */
+ mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
+ if (pinfo2 & INSN2_WRITE_SP)
+ mask |= 1 << SP;
/* Don't include register 0. */
return mask & ~1;
}
static unsigned int
fpr_read_mask (const struct mips_cl_insn *ip)
{
- unsigned long pinfo, pinfo2;
+ unsigned long pinfo;
unsigned int mask;
- mask = 0;
+ mask = insn_reg_mask (ip, (1 << OP_REG_FP) | (1 << OP_REG_VEC),
+ insn_read_mask (ip->insn_mo));
pinfo = ip->insn_mo->pinfo;
- pinfo2 = ip->insn_mo->pinfo2;
- if (!mips_opts.mips16)
- {
- if (pinfo2 & INSN2_READ_FPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FD, *ip);
- if (pinfo & INSN_READ_FPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FS, *ip);
- if (pinfo & INSN_READ_FPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FT, *ip);
- if (pinfo & INSN_READ_FPR_R)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FR, *ip);
- if (pinfo2 & INSN2_READ_FPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FZ, *ip);
- }
/* Conservatively treat all operands to an FP_D instruction are doubles.
(This is overly pessimistic for things like cvt.d.s.) */
if (HAVE_32BIT_FPRS && (pinfo & FP_D))
static unsigned int
fpr_write_mask (const struct mips_cl_insn *ip)
{
- unsigned long pinfo, pinfo2;
+ unsigned long pinfo;
unsigned int mask;
- mask = 0;
+ mask = insn_reg_mask (ip, (1 << OP_REG_FP) | (1 << OP_REG_VEC),
+ insn_write_mask (ip->insn_mo));
pinfo = ip->insn_mo->pinfo;
- pinfo2 = ip->insn_mo->pinfo2;
- if (!mips_opts.mips16)
- {
- if (pinfo & INSN_WRITE_FPR_D)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FD, *ip);
- if (pinfo & INSN_WRITE_FPR_S)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FS, *ip);
- if (pinfo & INSN_WRITE_FPR_T)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FT, *ip);
- if (pinfo2 & INSN2_WRITE_FPR_Z)
- mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, FZ, *ip);
- }
/* Conservatively treat all operands to an FP_D instruction are doubles.
(This is overly pessimistic for things like cvt.s.d.) */
if (HAVE_32BIT_FPRS && (pinfo & FP_D))
return FALSE;
}
-/* Report that user-supplied argument ARGNUM for INSN was VAL, but should
- have been in the range [MIN_VAL, MAX_VAL]. PRINT_HEX says whether
- this operand is normally printed in hex or decimal. */
-
-static void
-report_bad_range (struct mips_cl_insn *insn, int argnum,
- offsetT val, int min_val, int max_val,
- bfd_boolean print_hex)
-{
- if (print_hex && val >= 0)
- as_bad (_("Operand %d of `%s' must be in the range [0x%x, 0x%x],"
- " was 0x%lx."),
- argnum, insn->insn_mo->name, min_val, max_val, (unsigned long) val);
- else if (print_hex)
- as_bad (_("Operand %d of `%s' must be in the range [0x%x, 0x%x],"
- " was %ld."),
- argnum, insn->insn_mo->name, min_val, max_val, (unsigned long) val);
- else
- as_bad (_("Operand %d of `%s' must be in the range [%d, %d],"
- " was %ld."),
- argnum, insn->insn_mo->name, min_val, max_val, (unsigned long) val);
-}
-
-/* Report an invalid combination of position and size operands for a bitfield
- operation. POS and SIZE are the values that were given. */
-
-static void
-report_bad_field (offsetT pos, offsetT size)
-{
- as_bad (_("Invalid field specification (position %ld, size %ld)"),
- (unsigned long) pos, (unsigned long) size);
-}
-
/* Information about an instruction argument that we're trying to match. */
struct mips_arg_info
{
/* The instruction so far. */
struct mips_cl_insn *insn;
+ /* The first unconsumed operand token. */
+ struct mips_operand_token *token;
+
/* The 1-based operand number, in terms of insn->insn_mo->args. */
int opnum;
where it gives the lsb position. */
unsigned int last_op_int;
- /* If true, match routines should silently reject invalid arguments.
- If false, match routines can accept invalid arguments as long as
- they report an appropriate error. They still have the option of
- silently rejecting arguments, in which case a generic "Invalid operands"
- style of error will be used instead. */
- bfd_boolean soft_match;
-
- /* If true, the OP_INT match routine should treat plain symbolic operands
- as if a relocation operator like %lo(...) had been used. This is only
- ever true if the operand can be relocated. */
- bfd_boolean allow_nonconst;
-
- /* When true, the OP_INT match routine should allow unsigned N-bit
- arguments to be used where a signed N-bit operand is expected. */
- bfd_boolean lax_max;
-
- /* When true, the OP_REG match routine should assume that another operand
- appears after this one. It should fail the match if the register it
- sees is at the end of the argument list. */
- bfd_boolean optional_reg;
+ /* If true, match routines should assume that no later instruction
+ alternative matches and should therefore be as accomodating as
+ possible. Match routines should not report errors if something
+ is only invalid for !LAX_MATCH. */
+ bfd_boolean lax_match;
/* True if a reference to the current AT register was seen. */
bfd_boolean seen_at;
};
-/* Match a constant integer at S for ARG. Return null if the match failed.
- Otherwise return the end of the matched string and store the constant value
- in *VALUE. In the latter case, use FALLBACK as the value if the match
- succeeded with an error. */
+/* Record that the argument is out of range. */
-static char *
-match_const_int (struct mips_arg_info *arg, char *s, offsetT *value,
- offsetT fallback)
+static void
+match_out_of_range (struct mips_arg_info *arg)
{
- expressionS ex;
- bfd_reloc_code_real_type r[3];
- int num_relocs;
+ set_insn_error_i (arg->argnum, _("operand %d out of range"), arg->argnum);
+}
+
+/* Record that the argument isn't constant but needs to be. */
+
+static void
+match_not_constant (struct mips_arg_info *arg)
+{
+ set_insn_error_i (arg->argnum, _("operand %d must be constant"),
+ arg->argnum);
+}
+
+/* Try to match an OT_CHAR token for character CH. Consume the token
+ and return true on success, otherwise return false. */
- num_relocs = my_getSmallExpression (&ex, r, s);
- if (*s == '(' && ex.X_op == O_register)
+static bfd_boolean
+match_char (struct mips_arg_info *arg, char ch)
+{
+ if (arg->token->type == OT_CHAR && arg->token->u.ch == ch)
{
- /* Assume that the constant has been elided and that S is a base
- register. The rest of the match will fail if the assumption
- turns out to be wrong. */
- *value = 0;
- return s;
+ ++arg->token;
+ if (ch == ',')
+ arg->argnum += 1;
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/* Try to get an expression from the next tokens in ARG. Consume the
+ tokens and return true on success, storing the expression value in
+ VALUE and relocation types in R. */
+
+static bfd_boolean
+match_expression (struct mips_arg_info *arg, expressionS *value,
+ bfd_reloc_code_real_type *r)
+{
+ /* If the next token is a '(' that was parsed as being part of a base
+ expression, assume we have an elided offset. The later match will fail
+ if this turns out to be wrong. */
+ if (arg->token->type == OT_CHAR && arg->token->u.ch == '(')
+ {
+ value->X_op = O_constant;
+ value->X_add_number = 0;
+ r[0] = r[1] = r[2] = BFD_RELOC_UNUSED;
+ return TRUE;
+ }
+
+ /* Reject register-based expressions such as "0+$2" and "(($2))".
+ For plain registers the default error seems more appropriate. */
+ if (arg->token->type == OT_INTEGER
+ && arg->token->u.integer.value.X_op == O_register)
+ {
+ set_insn_error (arg->argnum, _("register value used as expression"));
+ return FALSE;
+ }
+
+ if (arg->token->type == OT_INTEGER)
+ {
+ *value = arg->token->u.integer.value;
+ memcpy (r, arg->token->u.integer.relocs, 3 * sizeof (*r));
+ ++arg->token;
+ return TRUE;
}
- if (num_relocs == 0 && ex.X_op == O_constant)
+ set_insn_error_i
+ (arg->argnum, _("operand %d must be an immediate expression"),
+ arg->argnum);
+ return FALSE;
+}
+
+/* Try to get a constant expression from the next tokens in ARG. Consume
+ the tokens and return return true on success, storing the constant value
+ in *VALUE. Use FALLBACK as the value if the match succeeded with an
+ error. */
+
+static bfd_boolean
+match_const_int (struct mips_arg_info *arg, offsetT *value)
+{
+ expressionS ex;
+ bfd_reloc_code_real_type r[3];
+
+ if (!match_expression (arg, &ex, r))
+ return FALSE;
+
+ if (r[0] == BFD_RELOC_UNUSED && ex.X_op == O_constant)
*value = ex.X_add_number;
else
{
- /* If we got a register rather than an expression, the default
- "Invalid operands" style of error seems more appropriate. */
- if (arg->soft_match || ex.X_op == O_register)
- return 0;
- as_bad (_("Operand %d of `%s' must be constant"),
- arg->argnum, arg->insn->insn_mo->name);
- *value = fallback;
+ match_not_constant (arg);
+ return FALSE;
}
- return expr_end;
+ return TRUE;
}
/* Return the RTYPE_* flags for a register operand of type TYPE that
case OP_REG_HW:
return RTYPE_NUM;
+
+ case OP_REG_VI:
+ return RTYPE_NUM | RTYPE_VI;
+
+ case OP_REG_VF:
+ return RTYPE_NUM | RTYPE_VF;
+
+ case OP_REG_R5900_I:
+ return RTYPE_R5900_I;
+
+ case OP_REG_R5900_Q:
+ return RTYPE_R5900_Q;
+
+ case OP_REG_R5900_R:
+ return RTYPE_R5900_R;
+
+ case OP_REG_R5900_ACC:
+ return RTYPE_R5900_ACC;
}
abort ();
}
&& (regno & 1) != 0
&& HAVE_32BIT_FPRS
&& !mips_oddfpreg_ok (arg->insn->insn_mo, arg->opnum))
- as_warn (_("Float register should be even, was %d"), regno);
+ as_warn (_("float register should be even, was %d"), regno);
if (type == OP_REG_CCC)
{
if ((regno & 1) != 0
&& ((length >= 3 && strcmp (name + length - 3, ".ps") == 0)
|| (length >= 5 && strncmp (name + length - 5, "any2", 4) == 0)))
- as_warn (_("Condition code register should be even for %s, was %d"),
+ as_warn (_("condition code register should be even for %s, was %d"),
name, regno);
if ((regno & 3) != 0
&& (length >= 5 && strncmp (name + length - 5, "any4", 4) == 0))
- as_warn (_("Condition code register should be 0 or 4 for %s, was %d"),
+ as_warn (_("condition code register should be 0 or 4 for %s, was %d"),
name, regno);
}
}
+/* ARG is a register with symbol value SYMVAL. Try to interpret it as
+ a register of type TYPE. Return true on success, storing the register
+ number in *REGNO and warning about any dubious uses. */
+
+static bfd_boolean
+match_regno (struct mips_arg_info *arg, enum mips_reg_operand_type type,
+ unsigned int symval, unsigned int *regno)
+{
+ if (type == OP_REG_VEC)
+ symval = mips_prefer_vec_regno (symval);
+ if (!(symval & convert_reg_type (arg->insn->insn_mo, type)))
+ return FALSE;
+
+ *regno = symval & RNUM_MASK;
+ check_regno (arg, type, *regno);
+ return TRUE;
+}
+
+/* Try to interpret the next token in ARG as a register of type TYPE.
+ Consume the token and return true on success, storing the register
+ number in *REGNO. Return false on failure. */
+
+static bfd_boolean
+match_reg (struct mips_arg_info *arg, enum mips_reg_operand_type type,
+ unsigned int *regno)
+{
+ if (arg->token->type == OT_REG
+ && match_regno (arg, type, arg->token->u.regno, regno))
+ {
+ ++arg->token;
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/* Try to interpret the next token in ARG as a range of registers of type TYPE.
+ Consume the token and return true on success, storing the register numbers
+ in *REGNO1 and *REGNO2. Return false on failure. */
+
+static bfd_boolean
+match_reg_range (struct mips_arg_info *arg, enum mips_reg_operand_type type,
+ unsigned int *regno1, unsigned int *regno2)
+{
+ if (match_reg (arg, type, regno1))
+ {
+ *regno2 = *regno1;
+ return TRUE;
+ }
+ if (arg->token->type == OT_REG_RANGE
+ && match_regno (arg, type, arg->token->u.reg_range.regno1, regno1)
+ && match_regno (arg, type, arg->token->u.reg_range.regno2, regno2)
+ && *regno1 <= *regno2)
+ {
+ ++arg->token;
+ return TRUE;
+ }
+ return FALSE;
+}
+
/* OP_INT matcher. */
-static char *
+static bfd_boolean
match_int_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand_base, char *s)
+ const struct mips_operand *operand_base)
{
const struct mips_int_operand *operand;
- unsigned int uval, mask;
+ unsigned int uval;
int min_val, max_val, factor;
offsetT sval;
- bfd_boolean print_hex;
operand = (const struct mips_int_operand *) operand_base;
factor = 1 << operand->shift;
- mask = (1 << operand_base->size) - 1;
- max_val = (operand->max_val + operand->bias) << operand->shift;
- min_val = max_val - (mask << operand->shift);
- if (arg->lax_max)
- max_val = mask << operand->shift;
+ min_val = mips_int_operand_min (operand);
+ max_val = mips_int_operand_max (operand);
if (operand_base->lsb == 0
&& operand_base->size == 16
&& (operand->max_val == 32767 || operand->max_val == 65535))
{
/* The operand can be relocated. */
- offset_reloc[0] = BFD_RELOC_LO16;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
- if (my_getSmallExpression (&offset_expr, offset_reloc, s) > 0)
+ if (!match_expression (arg, &offset_expr, offset_reloc))
+ return FALSE;
+
+ if (offset_reloc[0] != BFD_RELOC_UNUSED)
/* Relocation operators were used. Accept the arguent and
leave the relocation value in offset_expr and offset_relocs
for the caller to process. */
- return expr_end;
- if (*s == '(' && offset_expr.X_op == O_register)
- /* Assume that the constant has been elided and that S is a base
- register. The rest of the match will fail if the assumption
- turns out to be wrong. */
- sval = 0;
- else
+ return TRUE;
+
+ if (offset_expr.X_op != O_constant)
{
- s = expr_end;
- if (offset_expr.X_op != O_constant)
- /* If non-constant operands are allowed then leave them for
- the caller to process, otherwise fail the match. */
- return arg->allow_nonconst ? s : 0;
- sval = offset_expr.X_add_number;
+ /* Accept non-constant operands if no later alternative matches,
+ leaving it for the caller to process. */
+ if (!arg->lax_match)
+ return FALSE;
+ offset_reloc[0] = BFD_RELOC_LO16;
+ return TRUE;
}
+
/* Clear the global state; we're going to install the operand
ourselves. */
- offset_reloc[0] = BFD_RELOC_UNUSED;
+ sval = offset_expr.X_add_number;
offset_expr.X_op = O_absent;
+
+ /* For compatibility with older assemblers, we accept
+ 0x8000-0xffff as signed 16-bit numbers when only
+ signed numbers are allowed. */
+ if (sval > max_val)
+ {
+ max_val = ((1 << operand_base->size) - 1) << operand->shift;
+ if (!arg->lax_match && sval <= max_val)
+ return FALSE;
+ }
}
else
{
- s = match_const_int (arg, s, &sval, min_val);
- if (!s)
- return 0;
+ if (!match_const_int (arg, &sval))
+ return FALSE;
}
arg->last_op_int = sval;
- /* Check the range. If there's a problem, record the lowest acceptable
- value in arg->last_op_int in order to prevent an unhelpful error
- from OP_MSB too.
-
- Bit counts have traditionally been printed in hex by the disassembler
- but printed as decimal in error messages. Only resort to hex if
- the operand is bigger than 6 bits. */
- print_hex = operand->print_hex && operand_base->size > 6;
- if (sval < min_val || sval > max_val)
- {
- if (arg->soft_match)
- return 0;
- report_bad_range (arg->insn, arg->argnum, sval, min_val, max_val,
- print_hex);
- arg->last_op_int = min_val;
- }
- else if (sval % factor)
+ if (sval < min_val || sval > max_val || sval % factor)
{
- if (arg->soft_match)
- return 0;
- as_bad (print_hex && sval >= 0
- ? _("Operand %d of `%s' must be a factor of %d, was 0x%lx.")
- : _("Operand %d of `%s' must be a factor of %d, was %ld."),
- arg->argnum, arg->insn->insn_mo->name, factor,
- (unsigned long) sval);
- arg->last_op_int = min_val;
+ match_out_of_range (arg);
+ return FALSE;
}
uval = (unsigned int) sval >> operand->shift;
}
insn_insert_operand (arg->insn, operand_base, uval);
- return s;
+ return TRUE;
}
/* OP_MAPPED_INT matcher. */
-static char *
+static bfd_boolean
match_mapped_int_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand_base, char *s)
+ const struct mips_operand *operand_base)
{
const struct mips_mapped_int_operand *operand;
unsigned int uval, num_vals;
offsetT sval;
operand = (const struct mips_mapped_int_operand *) operand_base;
- s = match_const_int (arg, s, &sval, operand->int_map[0]);
- if (!s)
- return 0;
+ if (!match_const_int (arg, &sval))
+ return FALSE;
num_vals = 1 << operand_base->size;
for (uval = 0; uval < num_vals; uval++)
if (operand->int_map[uval] == sval)
break;
if (uval == num_vals)
- return 0;
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
insn_insert_operand (arg->insn, operand_base, uval);
- return s;
+ return TRUE;
}
/* OP_MSB matcher. */
-static char *
+static bfd_boolean
match_msb_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand_base, char *s)
+ const struct mips_operand *operand_base)
{
const struct mips_msb_operand *operand;
int min_val, max_val, max_high;
max_val = min_val + (1 << operand_base->size) - 1;
max_high = operand->opsize;
- s = match_const_int (arg, s, &size, 1);
- if (!s)
- return 0;
+ if (!match_const_int (arg, &size))
+ return FALSE;
high = size + arg->last_op_int;
sval = operand->add_lsb ? high : size;
if (size < 0 || high > max_high || sval < min_val || sval > max_val)
{
- if (arg->soft_match)
- return 0;
- report_bad_field (arg->last_op_int, size);
- sval = min_val;
+ match_out_of_range (arg);
+ return FALSE;
}
insn_insert_operand (arg->insn, operand_base, sval - min_val);
- return s;
+ return TRUE;
}
/* OP_REG matcher. */
-static char *
+static bfd_boolean
match_reg_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand_base, char *s)
+ const struct mips_operand *operand_base)
{
const struct mips_reg_operand *operand;
- unsigned int regno, uval, num_vals, types;
+ unsigned int regno, uval, num_vals;
operand = (const struct mips_reg_operand *) operand_base;
- types = convert_reg_type (arg->insn->insn_mo, operand->reg_type);
- if (!reg_lookup (&s, types, ®no))
- return 0;
-
- SKIP_SPACE_TABS (s);
- if (arg->optional_reg && *s == 0)
- return 0;
+ if (!match_reg (arg, operand->reg_type, ®no))
+ return FALSE;
if (operand->reg_map)
{
if (operand->reg_map[uval] == regno)
break;
if (num_vals == uval)
- return 0;
+ return FALSE;
}
else
uval = regno;
- check_regno (arg, operand->reg_type, regno);
arg->last_regno = regno;
if (arg->opnum == 1)
arg->dest_regno = regno;
insn_insert_operand (arg->insn, operand_base, uval);
- return s;
+ return TRUE;
}
/* OP_REG_PAIR matcher. */
-static char *
+static bfd_boolean
match_reg_pair_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand_base, char *s)
+ const struct mips_operand *operand_base)
{
const struct mips_reg_pair_operand *operand;
- unsigned int regno1, regno2, uval, num_vals, types;
+ unsigned int regno1, regno2, uval, num_vals;
operand = (const struct mips_reg_pair_operand *) operand_base;
- types = convert_reg_type (arg->insn->insn_mo, operand->reg_type);
-
- if (!reg_lookup (&s, types, ®no1))
- return 0;
-
- SKIP_SPACE_TABS (s);
- if (*s++ != ',')
- return 0;
- arg->argnum += 1;
-
- if (!reg_lookup (&s, types, ®no2))
- return 0;
+ if (!match_reg (arg, operand->reg_type, ®no1)
+ || !match_char (arg, ',')
+ || !match_reg (arg, operand->reg_type, ®no2))
+ return FALSE;
num_vals = 1 << operand_base->size;
for (uval = 0; uval < num_vals; uval++)
if (operand->reg1_map[uval] == regno1 && operand->reg2_map[uval] == regno2)
break;
if (uval == num_vals)
- return 0;
+ return FALSE;
- check_regno (arg, operand->reg_type, regno1);
- check_regno (arg, operand->reg_type, regno2);
insn_insert_operand (arg->insn, operand_base, uval);
- return s;
+ return TRUE;
}
/* OP_PCREL matcher. The caller chooses the relocation type. */
-static char *
-match_pcrel_operand (char *s)
+static bfd_boolean
+match_pcrel_operand (struct mips_arg_info *arg)
{
- my_getExpression (&offset_expr, s);
- return expr_end;
+ bfd_reloc_code_real_type r[3];
+
+ return match_expression (arg, &offset_expr, r) && r[0] == BFD_RELOC_UNUSED;
}
/* OP_PERF_REG matcher. */
-static char *
+static bfd_boolean
match_perf_reg_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand, char *s)
+ const struct mips_operand *operand)
{
offsetT sval;
- s = match_const_int (arg, s, &sval, 0);
- if (!s)
- return 0;
+ if (!match_const_int (arg, &sval))
+ return FALSE;
if (sval != 0
&& (sval != 1
&& (strcmp (arg->insn->insn_mo->name, "mfps") == 0
|| strcmp (arg->insn->insn_mo->name, "mtps") == 0))))
{
- if (arg->soft_match)
- return 0;
- as_bad (_("Invalid performance register (%ld)"), (unsigned long) sval);
+ set_insn_error (arg->argnum, _("invalid performance register"));
+ return FALSE;
}
insn_insert_operand (arg->insn, operand, sval);
- return s;
+ return TRUE;
}
/* OP_ADDIUSP matcher. */
-static char *
+static bfd_boolean
match_addiusp_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand, char *s)
+ const struct mips_operand *operand)
{
offsetT sval;
unsigned int uval;
- s = match_const_int (arg, s, &sval, -256);
- if (!s)
- return 0;
+ if (!match_const_int (arg, &sval))
+ return FALSE;
if (sval % 4)
- return 0;
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
sval /= 4;
if (!(sval >= -258 && sval <= 257) || (sval >= -2 && sval <= 1))
- return 0;
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
uval = (unsigned int) sval;
uval = ((uval >> 1) & ~0xff) | (uval & 0xff);
insn_insert_operand (arg->insn, operand, uval);
- return s;
+ return TRUE;
}
/* OP_CLO_CLZ_DEST matcher. */
-static char *
+static bfd_boolean
match_clo_clz_dest_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand, char *s)
+ const struct mips_operand *operand)
{
unsigned int regno;
- if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no))
- return 0;
+ if (!match_reg (arg, OP_REG_GP, ®no))
+ return FALSE;
- check_regno (arg, OP_REG_GP, regno);
insn_insert_operand (arg->insn, operand, regno | (regno << 5));
- return s;
+ return TRUE;
}
/* OP_LWM_SWM_LIST matcher. */
-static char *
+static bfd_boolean
match_lwm_swm_list_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand, char *s)
+ const struct mips_operand *operand)
{
- unsigned int reglist, sregs, ra;
+ unsigned int reglist, sregs, ra, regno1, regno2;
+ struct mips_arg_info reset;
- if (!reglist_lookup (&s, RTYPE_NUM | RTYPE_GP, ®list))
- return 0;
+ reglist = 0;
+ if (!match_reg_range (arg, OP_REG_GP, ®no1, ®no2))
+ return FALSE;
+ do
+ {
+ if (regno2 == FP && regno1 >= S0 && regno1 <= S7)
+ {
+ reglist |= 1 << FP;
+ regno2 = S7;
+ }
+ reglist |= ((1U << regno2 << 1) - 1) & -(1U << regno1);
+ reset = *arg;
+ }
+ while (match_char (arg, ',')
+ && match_reg_range (arg, OP_REG_GP, ®no1, ®no2));
+ *arg = reset;
if (operand->size == 2)
{
and any permutations of these. */
if ((reglist & 0xfff1ffff) != 0x80010000)
- return 0;
+ return FALSE;
sregs = (reglist >> 17) & 7;
ra = 0;
and any permutations of these. */
if ((reglist & 0x3f00ffff) != 0)
- return 0;
+ return FALSE;
ra = (reglist >> 27) & 0x10;
sregs = ((reglist >> 22) & 0x100) | ((reglist >> 16) & 0xff);
}
sregs += 1;
if ((sregs & -sregs) != sregs)
- return 0;
+ return FALSE;
insn_insert_operand (arg->insn, operand, (ffs (sregs) - 1) | ra);
- return s;
+ return TRUE;
+}
+
+/* OP_ENTRY_EXIT_LIST matcher. */
+
+static unsigned int
+match_entry_exit_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand)
+{
+ unsigned int mask;
+ bfd_boolean is_exit;
+
+ /* The format is the same for both ENTRY and EXIT, but the constraints
+ are different. */
+ is_exit = strcmp (arg->insn->insn_mo->name, "exit") == 0;
+ mask = (is_exit ? 7 << 3 : 0);
+ do
+ {
+ unsigned int regno1, regno2;
+ bfd_boolean is_freg;
+
+ if (match_reg_range (arg, OP_REG_GP, ®no1, ®no2))
+ is_freg = FALSE;
+ else if (match_reg_range (arg, OP_REG_FP, ®no1, ®no2))
+ is_freg = TRUE;
+ else
+ return FALSE;
+
+ if (is_exit && is_freg && regno1 == 0 && regno2 < 2)
+ {
+ mask &= ~(7 << 3);
+ mask |= (5 + regno2) << 3;
+ }
+ else if (!is_exit && regno1 == 4 && regno2 >= 4 && regno2 <= 7)
+ mask |= (regno2 - 3) << 3;
+ else if (regno1 == 16 && regno2 >= 16 && regno2 <= 17)
+ mask |= (regno2 - 15) << 1;
+ else if (regno1 == RA && regno2 == RA)
+ mask |= 1;
+ else
+ return FALSE;
+ }
+ while (match_char (arg, ','));
+
+ insn_insert_operand (arg->insn, operand, mask);
+ return TRUE;
+}
+
+/* OP_SAVE_RESTORE_LIST matcher. */
+
+static bfd_boolean
+match_save_restore_list_operand (struct mips_arg_info *arg)
+{
+ unsigned int opcode, args, statics, sregs;
+ unsigned int num_frame_sizes, num_args, num_statics, num_sregs;
+ offsetT frame_size;
+
+ opcode = arg->insn->insn_opcode;
+ frame_size = 0;
+ num_frame_sizes = 0;
+ args = 0;
+ statics = 0;
+ sregs = 0;
+ do
+ {
+ unsigned int regno1, regno2;
+
+ if (arg->token->type == OT_INTEGER)
+ {
+ /* Handle the frame size. */
+ if (!match_const_int (arg, &frame_size))
+ return FALSE;
+ num_frame_sizes += 1;
+ }
+ else
+ {
+ if (!match_reg_range (arg, OP_REG_GP, ®no1, ®no2))
+ return FALSE;
+
+ while (regno1 <= regno2)
+ {
+ if (regno1 >= 4 && regno1 <= 7)
+ {
+ if (num_frame_sizes == 0)
+ /* args $a0-$a3 */
+ args |= 1 << (regno1 - 4);
+ else
+ /* statics $a0-$a3 */
+ statics |= 1 << (regno1 - 4);
+ }
+ else if (regno1 >= 16 && regno1 <= 23)
+ /* $s0-$s7 */
+ sregs |= 1 << (regno1 - 16);
+ else if (regno1 == 30)
+ /* $s8 */
+ sregs |= 1 << 8;
+ else if (regno1 == 31)
+ /* Add $ra to insn. */
+ opcode |= 0x40;
+ else
+ return FALSE;
+ regno1 += 1;
+ if (regno1 == 24)
+ regno1 = 30;
+ }
+ }
+ }
+ while (match_char (arg, ','));
+
+ /* Encode args/statics combination. */
+ if (args & statics)
+ return FALSE;
+ else if (args == 0xf)
+ /* All $a0-$a3 are args. */
+ opcode |= MIPS16_ALL_ARGS << 16;
+ else if (statics == 0xf)
+ /* All $a0-$a3 are statics. */
+ opcode |= MIPS16_ALL_STATICS << 16;
+ else
+ {
+ /* Count arg registers. */
+ num_args = 0;
+ while (args & 0x1)
+ {
+ args >>= 1;
+ num_args += 1;
+ }
+ if (args != 0)
+ return FALSE;
+
+ /* Count static registers. */
+ num_statics = 0;
+ while (statics & 0x8)
+ {
+ statics = (statics << 1) & 0xf;
+ num_statics += 1;
+ }
+ if (statics != 0)
+ return FALSE;
+
+ /* Encode args/statics. */
+ opcode |= ((num_args << 2) | num_statics) << 16;
+ }
+
+ /* Encode $s0/$s1. */
+ if (sregs & (1 << 0)) /* $s0 */
+ opcode |= 0x20;
+ if (sregs & (1 << 1)) /* $s1 */
+ opcode |= 0x10;
+ sregs >>= 2;
+
+ /* Encode $s2-$s8. */
+ num_sregs = 0;
+ while (sregs & 1)
+ {
+ sregs >>= 1;
+ num_sregs += 1;
+ }
+ if (sregs != 0)
+ return FALSE;
+ opcode |= num_sregs << 24;
+
+ /* Encode frame size. */
+ if (num_frame_sizes == 0)
+ {
+ set_insn_error (arg->argnum, _("missing frame size"));
+ return FALSE;
+ }
+ if (num_frame_sizes > 1)
+ {
+ set_insn_error (arg->argnum, _("frame size specified twice"));
+ return FALSE;
+ }
+ if ((frame_size & 7) != 0 || frame_size < 0 || frame_size > 0xff * 8)
+ {
+ set_insn_error (arg->argnum, _("invalid frame size"));
+ return FALSE;
+ }
+ if (frame_size != 128 || (opcode >> 16) != 0)
+ {
+ frame_size /= 8;
+ opcode |= (((frame_size & 0xf0) << 16)
+ | (frame_size & 0x0f));
+ }
+
+ /* Finally build the instruction. */
+ if ((opcode >> 16) != 0 || frame_size == 0)
+ opcode |= MIPS16_EXTEND;
+ arg->insn->insn_opcode = opcode;
+ return TRUE;
}
/* OP_MDMX_IMM_REG matcher. */
-static char *
+static bfd_boolean
match_mdmx_imm_reg_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand, char *s)
+ const struct mips_operand *operand)
{
- unsigned int regno, uval, types;
+ unsigned int regno, uval;
bfd_boolean is_qh;
const struct mips_opcode *opcode;
uval = mips_extract_operand (operand, opcode->match);
is_qh = (uval != 0);
- types = convert_reg_type (arg->insn->insn_mo, OP_REG_VEC);
- if (reg_lookup (&s, types, ®no))
+ if (arg->token->type == OT_REG || arg->token->type == OT_REG_ELEMENT)
{
if ((opcode->membership & INSN_5400)
&& strcmp (opcode->name, "rzu.ob") == 0)
{
- if (arg->soft_match)
- return 0;
- as_bad (_("Operand %d of `%s' must be an immediate"),
- arg->argnum, opcode->name);
+ set_insn_error_i (arg->argnum, _("operand %d must be an immediate"),
+ arg->argnum);
+ return FALSE;
}
/* Check whether this is a vector register or a broadcast of
a single element. */
- SKIP_SPACE_TABS (s);
- if (*s == '[')
+ if (arg->token->type == OT_REG_ELEMENT)
{
- /* Read the element number. */
- expressionS value;
-
- ++s;
- SKIP_SPACE_TABS (s);
- my_getExpression (&value, s);
- s = expr_end;
- if (value.X_op != O_constant
- || value.X_add_number < 0
- || value.X_add_number > (is_qh ? 3 : 7))
+ if (!match_regno (arg, OP_REG_VEC, arg->token->u.reg_element.regno,
+ ®no))
+ return FALSE;
+ if (arg->token->u.reg_element.index > (is_qh ? 3 : 7))
{
- if (arg->soft_match)
- return 0;
- as_bad (_("Invalid element selector"));
- value.X_add_number = 0;
+ set_insn_error (arg->argnum, _("invalid element selector"));
+ return FALSE;
}
- uval |= (unsigned int) value.X_add_number << (is_qh ? 2 : 1) << 5;
- SKIP_SPACE_TABS (s);
- if (*s == ']')
- ++s;
else
- {
- if (arg->soft_match)
- return 0;
- as_bad (_("Expecting ']' found '%s'"), s);
- }
+ uval |= arg->token->u.reg_element.index << (is_qh ? 2 : 1) << 5;
}
else
{
&& (strcmp (opcode->name, "sll.ob") == 0
|| strcmp (opcode->name, "srl.ob") == 0))
{
- if (arg->soft_match)
- return 0;
- as_bad (_("Operand %d of `%s' must be scalar"),
- arg->argnum, opcode->name);
+ set_insn_error_i (arg->argnum, _("operand %d must be scalar"),
+ arg->argnum);
+ return FALSE;
}
+ if (!match_regno (arg, OP_REG_VEC, arg->token->u.regno, ®no))
+ return FALSE;
if (is_qh)
uval |= MDMX_FMTSEL_VEC_QH << 5;
else
uval |= MDMX_FMTSEL_VEC_OB << 5;
}
- check_regno (arg, OP_REG_FP, regno);
uval |= regno;
+ ++arg->token;
}
else
{
offsetT sval;
- s = match_const_int (arg, s, &sval, 0);
- if (!s)
- return 0;
+ if (!match_const_int (arg, &sval))
+ return FALSE;
if (sval < 0 || sval > 31)
{
- if (arg->soft_match)
- return 0;
- report_bad_range (arg->insn, arg->argnum, sval, 0, 31, FALSE);
+ match_out_of_range (arg);
+ return FALSE;
}
uval |= (sval & 31);
if (is_qh)
uval |= MDMX_FMTSEL_IMM_OB << 5;
}
insn_insert_operand (arg->insn, operand, uval);
- return s;
+ return TRUE;
}
/* OP_PC matcher. */
-static char *
-match_pc_operand (char *s)
+static bfd_boolean
+match_pc_operand (struct mips_arg_info *arg)
{
- if (strncmp (s, "$pc", 3) != 0)
- return 0;
- s += 3;
- SKIP_SPACE_TABS (s);
- return s;
+ if (arg->token->type == OT_REG && (arg->token->u.regno & RTYPE_PC))
+ {
+ ++arg->token;
+ return TRUE;
+ }
+ return FALSE;
}
/* OP_REPEAT_DEST_REG and OP_REPEAT_PREV_REG matcher. OTHER_REGNO is the
register that we need to match. */
-static char *
-match_tied_reg_operand (struct mips_arg_info *arg, char *s,
- unsigned int other_regno)
+static bfd_boolean
+match_tied_reg_operand (struct mips_arg_info *arg, unsigned int other_regno)
{
unsigned int regno;
- if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no)
- || regno != other_regno)
- return 0;
- SKIP_SPACE_TABS (s);
- if (arg->optional_reg && *s == 0)
- return 0;
- return s;
+ return match_reg (arg, OP_REG_GP, ®no) && regno == other_regno;
+}
+
+/* Read a floating-point constant from S for LI.S or LI.D. LENGTH is
+ the length of the value in bytes (4 for float, 8 for double) and
+ USING_GPRS says whether the destination is a GPR rather than an FPR.
+
+ Return the constant in IMM and OFFSET as follows:
+
+ - If the constant should be loaded via memory, set IMM to O_absent and
+ OFFSET to the memory address.
+
+ - Otherwise, if the constant should be loaded into two 32-bit registers,
+ set IMM to the O_constant to load into the high register and OFFSET
+ to the corresponding value for the low register.
+
+ - Otherwise, set IMM to the full O_constant and set OFFSET to O_absent.
+
+ These constants only appear as the last operand in an instruction,
+ and every instruction that accepts them in any variant accepts them
+ in all variants. This means we don't have to worry about backing out
+ any changes if the instruction does not match. We just match
+ unconditionally and report an error if the constant is invalid. */
+
+static bfd_boolean
+match_float_constant (struct mips_arg_info *arg, expressionS *imm,
+ expressionS *offset, int length, bfd_boolean using_gprs)
+{
+ char *p;
+ segT seg, new_seg;
+ subsegT subseg;
+ const char *newname;
+ unsigned char *data;
+
+ /* Where the constant is placed is based on how the MIPS assembler
+ does things:
+
+ length == 4 && using_gprs -- immediate value only
+ length == 8 && using_gprs -- .rdata or immediate value
+ length == 4 && !using_gprs -- .lit4 or immediate value
+ length == 8 && !using_gprs -- .lit8 or immediate value
+
+ The .lit4 and .lit8 sections are only used if permitted by the
+ -G argument. */
+ if (arg->token->type != OT_FLOAT)
+ {
+ set_insn_error (arg->argnum, _("floating-point expression required"));
+ return FALSE;
+ }
+
+ gas_assert (arg->token->u.flt.length == length);
+ data = arg->token->u.flt.data;
+ ++arg->token;
+
+ /* Handle 32-bit constants for which an immediate value is best. */
+ if (length == 4
+ && (using_gprs
+ || g_switch_value < 4
+ || (data[0] == 0 && data[1] == 0)
+ || (data[2] == 0 && data[3] == 0)))
+ {
+ imm->X_op = O_constant;
+ if (!target_big_endian)
+ imm->X_add_number = bfd_getl32 (data);
+ else
+ imm->X_add_number = bfd_getb32 (data);
+ offset->X_op = O_absent;
+ return TRUE;
+ }
+
+ /* Handle 64-bit constants for which an immediate value is best. */
+ if (length == 8
+ && !mips_disable_float_construction
+ /* Constants can only be constructed in GPRs and copied
+ to FPRs if the GPRs are at least as wide as the FPRs.
+ Force the constant into memory if we are using 64-bit FPRs
+ but the GPRs are only 32 bits wide. */
+ /* ??? No longer true with the addition of MTHC1, but this
+ is legacy code... */
+ && (using_gprs || !(HAVE_64BIT_FPRS && HAVE_32BIT_GPRS))
+ && ((data[0] == 0 && data[1] == 0)
+ || (data[2] == 0 && data[3] == 0))
+ && ((data[4] == 0 && data[5] == 0)
+ || (data[6] == 0 && data[7] == 0)))
+ {
+ /* The value is simple enough to load with a couple of instructions.
+ If using 32-bit registers, set IMM to the high order 32 bits and
+ OFFSET to the low order 32 bits. Otherwise, set IMM to the entire
+ 64 bit constant. */
+ if (using_gprs ? HAVE_32BIT_GPRS : HAVE_32BIT_FPRS)
+ {
+ imm->X_op = O_constant;
+ offset->X_op = O_constant;
+ if (!target_big_endian)
+ {
+ imm->X_add_number = bfd_getl32 (data + 4);
+ offset->X_add_number = bfd_getl32 (data);
+ }
+ else
+ {
+ imm->X_add_number = bfd_getb32 (data);
+ offset->X_add_number = bfd_getb32 (data + 4);
+ }
+ if (offset->X_add_number == 0)
+ offset->X_op = O_absent;
+ }
+ else
+ {
+ imm->X_op = O_constant;
+ if (!target_big_endian)
+ imm->X_add_number = bfd_getl64 (data);
+ else
+ imm->X_add_number = bfd_getb64 (data);
+ offset->X_op = O_absent;
+ }
+ return TRUE;
+ }
+
+ /* Switch to the right section. */
+ seg = now_seg;
+ subseg = now_subseg;
+ if (length == 4)
+ {
+ gas_assert (!using_gprs && g_switch_value >= 4);
+ newname = ".lit4";
+ }
+ else
+ {
+ if (using_gprs || g_switch_value < 8)
+ newname = RDATA_SECTION_NAME;
+ else
+ newname = ".lit8";
+ }
+
+ new_seg = subseg_new (newname, (subsegT) 0);
+ bfd_set_section_flags (stdoutput, new_seg,
+ SEC_ALLOC | SEC_LOAD | SEC_READONLY | SEC_DATA);
+ frag_align (length == 4 ? 2 : 3, 0, 0);
+ if (strncmp (TARGET_OS, "elf", 3) != 0)
+ record_alignment (new_seg, 4);
+ else
+ record_alignment (new_seg, length == 4 ? 2 : 3);
+ if (seg == now_seg)
+ as_bad (_("cannot use `%s' in this section"), arg->insn->insn_mo->name);
+
+ /* Set the argument to the current address in the section. */
+ imm->X_op = O_absent;
+ offset->X_op = O_symbol;
+ offset->X_add_symbol = symbol_temp_new_now ();
+ offset->X_add_number = 0;
+
+ /* Put the floating point number into the section. */
+ p = frag_more (length);
+ memcpy (p, data, length);
+
+ /* Switch back to the original section. */
+ subseg_set (seg, subseg);
+ return TRUE;
+}
+
+/* OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX matcher; MATCH_P selects between
+ them. */
+
+static bfd_boolean
+match_vu0_suffix_operand (struct mips_arg_info *arg,
+ const struct mips_operand *operand,
+ bfd_boolean match_p)
+{
+ unsigned int uval;
+
+ /* The operand can be an XYZW mask or a single 2-bit channel index
+ (with X being 0). */
+ gas_assert (operand->size == 2 || operand->size == 4);
+
+ /* The suffix can be omitted when it is already part of the opcode. */
+ if (arg->token->type != OT_CHANNELS)
+ return match_p;
+
+ uval = arg->token->u.channels;
+ if (operand->size == 2)
+ {
+ /* Check that a single bit is set and convert it into a 2-bit index. */
+ if ((uval & -uval) != uval)
+ return FALSE;
+ uval = 4 - ffs (uval);
+ }
+
+ if (match_p && insn_extract_operand (arg->insn, operand) != uval)
+ return FALSE;
+
+ ++arg->token;
+ if (!match_p)
+ insn_insert_operand (arg->insn, operand, uval);
+ return TRUE;
}
/* S is the text seen for ARG. Match it against OPERAND. Return the end
of the argument text if the match is successful, otherwise return null. */
-static char *
+static bfd_boolean
match_operand (struct mips_arg_info *arg,
- const struct mips_operand *operand, char *s)
+ const struct mips_operand *operand)
{
switch (operand->type)
{
case OP_INT:
- return match_int_operand (arg, operand, s);
+ return match_int_operand (arg, operand);
case OP_MAPPED_INT:
- return match_mapped_int_operand (arg, operand, s);
+ return match_mapped_int_operand (arg, operand);
case OP_MSB:
- return match_msb_operand (arg, operand, s);
+ return match_msb_operand (arg, operand);
case OP_REG:
- return match_reg_operand (arg, operand, s);
+ case OP_OPTIONAL_REG:
+ return match_reg_operand (arg, operand);
case OP_REG_PAIR:
- return match_reg_pair_operand (arg, operand, s);
+ return match_reg_pair_operand (arg, operand);
case OP_PCREL:
- return match_pcrel_operand (s);
+ return match_pcrel_operand (arg);
case OP_PERF_REG:
- return match_perf_reg_operand (arg, operand, s);
+ return match_perf_reg_operand (arg, operand);
case OP_ADDIUSP_INT:
- return match_addiusp_operand (arg, operand, s);
+ return match_addiusp_operand (arg, operand);
case OP_CLO_CLZ_DEST:
- return match_clo_clz_dest_operand (arg, operand, s);
+ return match_clo_clz_dest_operand (arg, operand);
case OP_LWM_SWM_LIST:
- return match_lwm_swm_list_operand (arg, operand, s);
+ return match_lwm_swm_list_operand (arg, operand);
case OP_ENTRY_EXIT_LIST:
+ return match_entry_exit_operand (arg, operand);
+
case OP_SAVE_RESTORE_LIST:
- abort ();
+ return match_save_restore_list_operand (arg);
case OP_MDMX_IMM_REG:
- return match_mdmx_imm_reg_operand (arg, operand, s);
+ return match_mdmx_imm_reg_operand (arg, operand);
case OP_REPEAT_DEST_REG:
- return match_tied_reg_operand (arg, s, arg->dest_regno);
+ return match_tied_reg_operand (arg, arg->dest_regno);
case OP_REPEAT_PREV_REG:
- return match_tied_reg_operand (arg, s, arg->last_regno);
+ return match_tied_reg_operand (arg, arg->last_regno);
case OP_PC:
- return match_pc_operand (s);
+ return match_pc_operand (arg);
+
+ case OP_VU0_SUFFIX:
+ return match_vu0_suffix_operand (arg, operand, FALSE);
+
+ case OP_VU0_MATCH_SUFFIX:
+ return match_vu0_suffix_operand (arg, operand, TRUE);
}
abort ();
}
if (arg->seen_at)
{
if (AT == ATREG)
- as_warn (_("Used $at without \".set noat\""));
+ as_warn (_("used $at without \".set noat\""));
else
- as_warn (_("Used $%u with \".set at=$%u\""), AT, AT);
+ as_warn (_("used $%u with \".set at=$%u\""), AT, AT);
}
}
+/* Return true if modifying general-purpose register REG needs a delay. */
+
+static bfd_boolean
+reg_needs_delay (unsigned int reg)
+{
+ unsigned long prev_pinfo;
+
+ prev_pinfo = history[0].insn_mo->pinfo;
+ if (!mips_opts.noreorder
+ && (((prev_pinfo & INSN_LOAD_MEMORY_DELAY) && !gpr_interlocks)
+ || ((prev_pinfo & INSN_LOAD_COPROC_DELAY) && !cop_interlocks))
+ && (gpr_write_mask (&history[0]) & (1 << reg)))
+ return TRUE;
+
+ return FALSE;
+}
+
/* Classify an instruction according to the FIX_VR4120_* enumeration.
Return NUM_FIX_VR4120_CLASSES if the instruction isn't affected
by VR4120 errata. */
unsigned long pinfo1, pinfo2;
unsigned int mask;
- /* This function needs to know which pinfo flags are set for INSN2
- and which registers INSN2 uses. The former is stored in PINFO2 and
- the latter is tested via INSN2_USES_GPR. If INSN2 is null, PINFO2
- will have every flag set and INSN2_USES_GPR will always return true. */
+ /* If INFO2 is null, pessimistically assume that all flags are set for
+ the second instruction. */
pinfo1 = insn1->insn_mo->pinfo;
pinfo2 = insn2 ? insn2->insn_mo->pinfo : ~0U;
-#define INSN2_USES_GPR(REG) \
- (insn2 == NULL || (gpr_read_mask (insn2) & (1U << (REG))) != 0)
-
/* For most targets, write-after-read dependencies on the HI and LO
registers must be separated by at least two instructions. */
if (!hilo_interlocks)
if (mips_7000_hilo_fix
&& !mips_opts.micromips
&& MF_HILO_INSN (pinfo1)
- && INSN2_USES_GPR (EXTRACT_OPERAND (0, RD, *insn1)))
+ && (insn2 == NULL || (gpr_read_mask (insn2) & gpr_write_mask (insn1))))
return 2;
/* If we're working around 24K errata, one instruction is required
if ((!gpr_interlocks && (pinfo1 & INSN_LOAD_MEMORY_DELAY))
|| (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC_DELAY)))
{
- know (pinfo1 & INSN_WRITE_GPR_T);
- if (INSN2_USES_GPR (EXTRACT_OPERAND (0, RT, *insn1)))
+ if (insn2 == NULL || (gpr_read_mask (insn2) & gpr_write_mask (insn1)))
return 1;
}
return 1;
}
-#undef INSN2_USES_GPR
-
return 0;
}
static bfd_boolean
can_swap_branch_p (struct mips_cl_insn *ip, expressionS *address_expr,
- bfd_reloc_code_real_type *reloc_type)
+ bfd_reloc_code_real_type *reloc_type)
{
unsigned long pinfo, pinfo2, prev_pinfo, prev_pinfo2;
unsigned int gpr_read, gpr_write, prev_gpr_read, prev_gpr_write;
/* If the previous instruction uses the PC, we can not swap. */
prev_pinfo2 = history[0].insn_mo->pinfo2;
- if (mips_opts.mips16 && (prev_pinfo & MIPS16_INSN_READ_PC))
- return FALSE;
- if (mips_opts.micromips && (prev_pinfo2 & INSN2_READ_PC))
+ if (prev_pinfo2 & INSN2_READ_PC)
return FALSE;
/* If the previous instruction has an incorrect size for a fixed
static enum append_method
get_append_method (struct mips_cl_insn *ip, expressionS *address_expr,
- bfd_reloc_code_real_type *reloc_type)
+ bfd_reloc_code_real_type *reloc_type)
{
- unsigned long pinfo;
-
/* The relaxed version of a macro sequence must be inherently
hazard-free. */
if (mips_relax.sequence == 2)
&& can_swap_branch_p (ip, address_expr, reloc_type))
return APPEND_SWAP;
- pinfo = ip->insn_mo->pinfo;
if (mips_opts.mips16
&& ISA_SUPPORTS_MIPS16E
- && (pinfo & (MIPS16_INSN_READ_X | MIPS16_INSN_READ_31)))
+ && gpr_read_mask (ip) != 0)
return APPEND_ADD_COMPACT;
return APPEND_ADD_WITH_NOP;
&& micromips_insn_length (ip->insn_mo) != 2)
|| ((prev_pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
&& micromips_insn_length (ip->insn_mo) != 4)))
- as_warn (_("Wrong size instruction in a %u-bit branch delay slot"),
+ as_warn (_("wrong size instruction in a %u-bit branch delay slot"),
(prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 ? 16 : 32);
if (address_expr == NULL)
/* End a nested noreorder block. */
-static void
-end_noreorder (void)
-{
- mips_opts.noreorder--;
- if (mips_opts.noreorder == 0 && prev_nop_frag != NULL)
+static void
+end_noreorder (void)
+{
+ mips_opts.noreorder--;
+ if (mips_opts.noreorder == 0 && prev_nop_frag != NULL)
+ {
+ /* Commit to inserting prev_nop_frag_required nops and go back to
+ handling nop insertion the .set reorder way. */
+ prev_nop_frag->fr_fix -= ((prev_nop_frag_holds - prev_nop_frag_required)
+ * NOP_INSN_SIZE);
+ insert_into_history (prev_nop_frag_since,
+ prev_nop_frag_required, NOP_INSN);
+ prev_nop_frag = NULL;
+ }
+}
+
+/* Sign-extend 32-bit mode constants that have bit 31 set and all
+ higher bits unset. */
+
+static void
+normalize_constant_expr (expressionS *ex)
+{
+ if (ex->X_op == O_constant
+ && IS_ZEXT_32BIT_NUM (ex->X_add_number))
+ ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
+ - 0x80000000);
+}
+
+/* Sign-extend 32-bit mode address offsets that have bit 31 set and
+ all higher bits unset. */
+
+static void
+normalize_address_expr (expressionS *ex)
+{
+ if (((ex->X_op == O_constant && HAVE_32BIT_ADDRESSES)
+ || (ex->X_op == O_symbol && HAVE_32BIT_SYMBOLS))
+ && IS_ZEXT_32BIT_NUM (ex->X_add_number))
+ ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
+ - 0x80000000);
+}
+
+/* Try to match TOKENS against OPCODE, storing the result in INSN.
+ Return true if the match was successful.
+
+ OPCODE_EXTRA is a value that should be ORed into the opcode
+ (used for VU0 channel suffixes, etc.). MORE_ALTS is true if
+ there are more alternatives after OPCODE and SOFT_MATCH is
+ as for mips_arg_info. */
+
+static bfd_boolean
+match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
+ struct mips_operand_token *tokens, unsigned int opcode_extra,
+ bfd_boolean lax_match, bfd_boolean complete_p)
+{
+ const char *args;
+ struct mips_arg_info arg;
+ const struct mips_operand *operand;
+ char c;
+
+ imm_expr.X_op = O_absent;
+ offset_expr.X_op = O_absent;
+ offset_reloc[0] = BFD_RELOC_UNUSED;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
+
+ create_insn (insn, opcode);
+ /* When no opcode suffix is specified, assume ".xyzw". */
+ if ((opcode->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) != 0 && opcode_extra == 0)
+ insn->insn_opcode |= 0xf << mips_vu0_channel_mask.lsb;
+ else
+ insn->insn_opcode |= opcode_extra;
+ memset (&arg, 0, sizeof (arg));
+ arg.insn = insn;
+ arg.token = tokens;
+ arg.argnum = 1;
+ arg.last_regno = ILLEGAL_REG;
+ arg.dest_regno = ILLEGAL_REG;
+ arg.lax_match = lax_match;
+ for (args = opcode->args;; ++args)
+ {
+ if (arg.token->type == OT_END)
+ {
+ /* Handle unary instructions in which only one operand is given.
+ The source is then the same as the destination. */
+ if (arg.opnum == 1 && *args == ',')
+ {
+ operand = (mips_opts.micromips
+ ? decode_micromips_operand (args + 1)
+ : decode_mips_operand (args + 1));
+ if (operand && mips_optional_operand_p (operand))
+ {
+ arg.token = tokens;
+ arg.argnum = 1;
+ continue;
+ }
+ }
+
+ /* Treat elided base registers as $0. */
+ if (strcmp (args, "(b)") == 0)
+ args += 3;
+
+ if (args[0] == '+')
+ switch (args[1])
+ {
+ case 'K':
+ case 'N':
+ /* The register suffix is optional. */
+ args += 2;
+ break;
+ }
+
+ /* Fail the match if there were too few operands. */
+ if (*args)
+ return FALSE;
+
+ /* Successful match. */
+ if (!complete_p)
+ return TRUE;
+ clear_insn_error ();
+ if (arg.dest_regno == arg.last_regno
+ && strncmp (insn->insn_mo->name, "jalr", 4) == 0)
+ {
+ if (arg.opnum == 2)
+ set_insn_error
+ (0, _("source and destination must be different"));
+ else if (arg.last_regno == 31)
+ set_insn_error
+ (0, _("a destination register must be supplied"));
+ }
+ else if (arg.last_regno == 31
+ && (strncmp (insn->insn_mo->name, "bltzal", 6) == 0
+ || strncmp (insn->insn_mo->name, "bgezal", 6) == 0))
+ set_insn_error (0, _("the source register must not be $31"));
+ check_completed_insn (&arg);
+ return TRUE;
+ }
+
+ /* Fail the match if the line has too many operands. */
+ if (*args == 0)
+ return FALSE;
+
+ /* Handle characters that need to match exactly. */
+ if (*args == '(' || *args == ')' || *args == ',')
+ {
+ if (match_char (&arg, *args))
+ continue;
+ return FALSE;
+ }
+ if (*args == '#')
+ {
+ ++args;
+ if (arg.token->type == OT_DOUBLE_CHAR
+ && arg.token->u.ch == *args)
+ {
+ ++arg.token;
+ continue;
+ }
+ return FALSE;
+ }
+
+ /* Handle special macro operands. Work out the properties of
+ other operands. */
+ arg.opnum += 1;
+ switch (*args)
+ {
+ case '+':
+ switch (args[1])
+ {
+ case 'i':
+ *offset_reloc = BFD_RELOC_MIPS_JMP;
+ break;
+ }
+ break;
+
+ case 'I':
+ if (!match_const_int (&arg, &imm_expr.X_add_number))
+ return FALSE;
+ imm_expr.X_op = O_constant;
+ if (HAVE_32BIT_GPRS)
+ normalize_constant_expr (&imm_expr);
+ continue;
+
+ case 'A':
+ if (arg.token->type == OT_CHAR && arg.token->u.ch == '(')
+ {
+ /* Assume that the offset has been elided and that what
+ we saw was a base register. The match will fail later
+ if that assumption turns out to be wrong. */
+ offset_expr.X_op = O_constant;
+ offset_expr.X_add_number = 0;
+ }
+ else
+ {
+ if (!match_expression (&arg, &offset_expr, offset_reloc))
+ return FALSE;
+ normalize_address_expr (&offset_expr);
+ }
+ continue;
+
+ case 'F':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 8, TRUE))
+ return FALSE;
+ continue;
+
+ case 'L':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 8, FALSE))
+ return FALSE;
+ continue;
+
+ case 'f':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 4, TRUE))
+ return FALSE;
+ continue;
+
+ case 'l':
+ if (!match_float_constant (&arg, &imm_expr, &offset_expr,
+ 4, FALSE))
+ return FALSE;
+ continue;
+
+ case 'p':
+ *offset_reloc = BFD_RELOC_16_PCREL_S2;
+ break;
+
+ case 'a':
+ *offset_reloc = BFD_RELOC_MIPS_JMP;
+ break;
+
+ case 'm':
+ gas_assert (mips_opts.micromips);
+ c = args[1];
+ switch (c)
+ {
+ case 'D':
+ case 'E':
+ if (!forced_insn_length)
+ *offset_reloc = (int) BFD_RELOC_UNUSED + c;
+ else if (c == 'D')
+ *offset_reloc = BFD_RELOC_MICROMIPS_10_PCREL_S1;
+ else
+ *offset_reloc = BFD_RELOC_MICROMIPS_7_PCREL_S1;
+ break;
+ }
+ break;
+ }
+
+ operand = (mips_opts.micromips
+ ? decode_micromips_operand (args)
+ : decode_mips_operand (args));
+ if (!operand)
+ abort ();
+
+ /* Skip prefixes. */
+ if (*args == '+' || *args == 'm')
+ args++;
+
+ if (mips_optional_operand_p (operand)
+ && args[1] == ','
+ && (arg.token[0].type != OT_REG
+ || arg.token[1].type == OT_END))
+ {
+ /* Assume that the register has been elided and is the
+ same as the first operand. */
+ arg.token = tokens;
+ arg.argnum = 1;
+ }
+
+ if (!match_operand (&arg, operand))
+ return FALSE;
+ }
+}
+
+/* Like match_insn, but for MIPS16. */
+
+static bfd_boolean
+match_mips16_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
+ struct mips_operand_token *tokens)
+{
+ const char *args;
+ const struct mips_operand *operand;
+ const struct mips_operand *ext_operand;
+ struct mips_arg_info arg;
+ int relax_char;
+
+ create_insn (insn, opcode);
+ imm_expr.X_op = O_absent;
+ offset_expr.X_op = O_absent;
+ offset_reloc[0] = BFD_RELOC_UNUSED;
+ offset_reloc[1] = BFD_RELOC_UNUSED;
+ offset_reloc[2] = BFD_RELOC_UNUSED;
+ relax_char = 0;
+
+ memset (&arg, 0, sizeof (arg));
+ arg.insn = insn;
+ arg.token = tokens;
+ arg.argnum = 1;
+ arg.last_regno = ILLEGAL_REG;
+ arg.dest_regno = ILLEGAL_REG;
+ relax_char = 0;
+ for (args = opcode->args;; ++args)
+ {
+ int c;
+
+ if (arg.token->type == OT_END)
+ {
+ offsetT value;
+
+ /* Handle unary instructions in which only one operand is given.
+ The source is then the same as the destination. */
+ if (arg.opnum == 1 && *args == ',')
+ {
+ operand = decode_mips16_operand (args[1], FALSE);
+ if (operand && mips_optional_operand_p (operand))
+ {
+ arg.token = tokens;
+ arg.argnum = 1;
+ continue;
+ }
+ }
+
+ /* Fail the match if there were too few operands. */
+ if (*args)
+ return FALSE;
+
+ /* Successful match. Stuff the immediate value in now, if
+ we can. */
+ clear_insn_error ();
+ if (opcode->pinfo == INSN_MACRO)
+ {
+ gas_assert (relax_char == 0 || relax_char == 'p');
+ gas_assert (*offset_reloc == BFD_RELOC_UNUSED);
+ }
+ else if (relax_char
+ && offset_expr.X_op == O_constant
+ && calculate_reloc (*offset_reloc,
+ offset_expr.X_add_number,
+ &value))
+ {
+ mips16_immed (NULL, 0, relax_char, *offset_reloc, value,
+ forced_insn_length, &insn->insn_opcode);
+ offset_expr.X_op = O_absent;
+ *offset_reloc = BFD_RELOC_UNUSED;
+ }
+ else if (relax_char && *offset_reloc != BFD_RELOC_UNUSED)
+ {
+ if (forced_insn_length == 2)
+ set_insn_error (0, _("invalid unextended operand value"));
+ forced_insn_length = 4;
+ insn->insn_opcode |= MIPS16_EXTEND;
+ }
+ else if (relax_char)
+ *offset_reloc = (int) BFD_RELOC_UNUSED + relax_char;
+
+ check_completed_insn (&arg);
+ return TRUE;
+ }
+
+ /* Fail the match if the line has too many operands. */
+ if (*args == 0)
+ return FALSE;
+
+ /* Handle characters that need to match exactly. */
+ if (*args == '(' || *args == ')' || *args == ',')
+ {
+ if (match_char (&arg, *args))
+ continue;
+ return FALSE;
+ }
+
+ arg.opnum += 1;
+ c = *args;
+ switch (c)
+ {
+ case 'p':
+ case 'q':
+ case 'A':
+ case 'B':
+ case 'E':
+ relax_char = c;
+ break;
+
+ case 'I':
+ if (!match_const_int (&arg, &imm_expr.X_add_number))
+ return FALSE;
+ imm_expr.X_op = O_constant;
+ if (HAVE_32BIT_GPRS)
+ normalize_constant_expr (&imm_expr);
+ continue;
+
+ case 'a':
+ case 'i':
+ *offset_reloc = BFD_RELOC_MIPS16_JMP;
+ insn->insn_opcode <<= 16;
+ break;
+ }
+
+ operand = decode_mips16_operand (c, FALSE);
+ if (!operand)
+ abort ();
+
+ /* '6' is a special case. It is used for BREAK and SDBBP,
+ whose operands are only meaningful to the software that decodes
+ them. This means that there is no architectural reason why
+ they cannot be prefixed by EXTEND, but in practice,
+ exception handlers will only look at the instruction
+ itself. We therefore allow '6' to be extended when
+ disassembling but not when assembling. */
+ if (operand->type != OP_PCREL && c != '6')
+ {
+ ext_operand = decode_mips16_operand (c, TRUE);
+ if (operand != ext_operand)
+ {
+ if (arg.token->type == OT_CHAR && arg.token->u.ch == '(')
+ {
+ offset_expr.X_op = O_constant;
+ offset_expr.X_add_number = 0;
+ relax_char = c;
+ continue;
+ }
+
+ /* We need the OT_INTEGER check because some MIPS16
+ immediate variants are listed before the register ones. */
+ if (arg.token->type != OT_INTEGER
+ || !match_expression (&arg, &offset_expr, offset_reloc))
+ return FALSE;
+
+ /* '8' is used for SLTI(U) and has traditionally not
+ been allowed to take relocation operators. */
+ if (offset_reloc[0] != BFD_RELOC_UNUSED
+ && (ext_operand->size != 16 || c == '8'))
+ return FALSE;
+
+ relax_char = c;
+ continue;
+ }
+ }
+
+ if (mips_optional_operand_p (operand)
+ && args[1] == ','
+ && (arg.token[0].type != OT_REG
+ || arg.token[1].type == OT_END))
+ {
+ /* Assume that the register has been elided and is the
+ same as the first operand. */
+ arg.token = tokens;
+ arg.argnum = 1;
+ }
+
+ if (!match_operand (&arg, operand))
+ return FALSE;
+ }
+}
+
+/* Record that the current instruction is invalid for the current ISA. */
+
+static void
+match_invalid_for_isa (void)
+{
+ set_insn_error_ss
+ (0, _("opcode not supported on this processor: %s (%s)"),
+ mips_cpu_info_from_arch (mips_opts.arch)->name,
+ mips_cpu_info_from_isa (mips_opts.isa)->name);
+}
+
+/* Try to match TOKENS against a series of opcode entries, starting at FIRST.
+ Return true if a definite match or failure was found, storing any match
+ in INSN. OPCODE_EXTRA is a value that should be ORed into the opcode
+ (to handle things like VU0 suffixes). LAX_MATCH is true if we have already
+ tried and failed to match under normal conditions and now want to try a
+ more relaxed match. */
+
+static bfd_boolean
+match_insns (struct mips_cl_insn *insn, const struct mips_opcode *first,
+ const struct mips_opcode *past, struct mips_operand_token *tokens,
+ int opcode_extra, bfd_boolean lax_match)
+{
+ const struct mips_opcode *opcode;
+ const struct mips_opcode *invalid_delay_slot;
+ bfd_boolean seen_valid_for_isa, seen_valid_for_size;
+
+ /* Search for a match, ignoring alternatives that don't satisfy the
+ current ISA or forced_length. */
+ invalid_delay_slot = 0;
+ seen_valid_for_isa = FALSE;
+ seen_valid_for_size = FALSE;
+ opcode = first;
+ do
+ {
+ gas_assert (strcmp (opcode->name, first->name) == 0);
+ if (is_opcode_valid (opcode))
+ {
+ seen_valid_for_isa = TRUE;
+ if (is_size_valid (opcode))
+ {
+ bfd_boolean delay_slot_ok;
+
+ seen_valid_for_size = TRUE;
+ delay_slot_ok = is_delay_slot_valid (opcode);
+ if (match_insn (insn, opcode, tokens, opcode_extra,
+ lax_match, delay_slot_ok))
+ {
+ if (!delay_slot_ok)
+ {
+ if (!invalid_delay_slot)
+ invalid_delay_slot = opcode;
+ }
+ else
+ return TRUE;
+ }
+ }
+ }
+ ++opcode;
+ }
+ while (opcode < past && strcmp (opcode->name, first->name) == 0);
+
+ /* If the only matches we found had the wrong length for the delay slot,
+ pick the first such match. We'll issue an appropriate warning later. */
+ if (invalid_delay_slot)
+ {
+ if (match_insn (insn, invalid_delay_slot, tokens, opcode_extra,
+ lax_match, TRUE))
+ return TRUE;
+ abort ();
+ }
+
+ /* Handle the case where we didn't try to match an instruction because
+ all the alternatives were incompatible with the current ISA. */
+ if (!seen_valid_for_isa)
+ {
+ match_invalid_for_isa ();
+ return TRUE;
+ }
+
+ /* Handle the case where we didn't try to match an instruction because
+ all the alternatives were of the wrong size. */
+ if (!seen_valid_for_size)
+ {
+ if (mips_opts.insn32)
+ set_insn_error (0, _("opcode not supported in the `insn32' mode"));
+ else
+ set_insn_error_i
+ (0, _("unrecognized %d-bit version of microMIPS opcode"),
+ 8 * forced_insn_length);
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/* Like match_insns, but for MIPS16. */
+
+static bfd_boolean
+match_mips16_insns (struct mips_cl_insn *insn, const struct mips_opcode *first,
+ struct mips_operand_token *tokens)
+{
+ const struct mips_opcode *opcode;
+ bfd_boolean seen_valid_for_isa;
+
+ /* Search for a match, ignoring alternatives that don't satisfy the
+ current ISA. There are no separate entries for extended forms so
+ we deal with forced_length later. */
+ seen_valid_for_isa = FALSE;
+ opcode = first;
+ do
+ {
+ gas_assert (strcmp (opcode->name, first->name) == 0);
+ if (is_opcode_valid_16 (opcode))
+ {
+ seen_valid_for_isa = TRUE;
+ if (match_mips16_insn (insn, opcode, tokens))
+ return TRUE;
+ }
+ ++opcode;
+ }
+ while (opcode < &mips16_opcodes[bfd_mips16_num_opcodes]
+ && strcmp (opcode->name, first->name) == 0);
+
+ /* Handle the case where we didn't try to match an instruction because
+ all the alternatives were incompatible with the current ISA. */
+ if (!seen_valid_for_isa)
{
- /* Commit to inserting prev_nop_frag_required nops and go back to
- handling nop insertion the .set reorder way. */
- prev_nop_frag->fr_fix -= ((prev_nop_frag_holds - prev_nop_frag_required)
- * NOP_INSN_SIZE);
- insert_into_history (prev_nop_frag_since,
- prev_nop_frag_required, NOP_INSN);
- prev_nop_frag = NULL;
+ match_invalid_for_isa ();
+ return TRUE;
}
+
+ return FALSE;
}
/* Set up global variables for the start of a new macro. */
macro_warning (relax_substateT subtype)
{
if (subtype & RELAX_DELAY_SLOT)
- return _("Macro instruction expanded into multiple instructions"
+ return _("macro instruction expanded into multiple instructions"
" in a branch delay slot");
else if (subtype & RELAX_NOMACRO)
- return _("Macro instruction expanded into multiple instructions");
+ return _("macro instruction expanded into multiple instructions");
else if (subtype & (RELAX_DELAY_SLOT_SIZE_FIRST
| RELAX_DELAY_SLOT_SIZE_SECOND))
return ((subtype & RELAX_DELAY_SLOT_16BIT)
- ? _("Macro instruction expanded into a wrong size instruction"
+ ? _("macro instruction expanded into a wrong size instruction"
" in a 16-bit branch delay slot")
- : _("Macro instruction expanded into a wrong size instruction"
+ : _("macro instruction expanded into a wrong size instruction"
" in a 32-bit branch delay slot"));
else
return 0;
if (!operand)
abort ();
- insn_insert_operand (&insn, operand, va_arg (args, int));
+ insn_insert_operand (&insn, operand, va_arg (*args, int));
break;
}
}
append_insn (&insn, ep, r, TRUE);
}
-/*
- * Sign-extend 32-bit mode constants that have bit 31 set and all
- * higher bits unset.
- */
-static void
-normalize_constant_expr (expressionS *ex)
-{
- if (ex->X_op == O_constant
- && IS_ZEXT_32BIT_NUM (ex->X_add_number))
- ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
- - 0x80000000);
-}
-
-/*
- * Sign-extend 32-bit mode address offsets that have bit 31 set and
- * all higher bits unset.
- */
-static void
-normalize_address_expr (expressionS *ex)
-{
- if (((ex->X_op == O_constant && HAVE_32BIT_ADDRESSES)
- || (ex->X_op == O_symbol && HAVE_32BIT_SYMBOLS))
- && IS_ZEXT_32BIT_NUM (ex->X_add_number))
- ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
- - 0x80000000);
-}
-
/*
* Generate a "jalr" instruction with a relocation hint to the called
* function. This occurs in NewABI PIC code.
macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, AT);
if (!mips_opts.at)
- as_bad (_("Macro used $at after \".set noat\""));
+ as_bad (_("macro used $at after \".set noat\""));
}
}
static void
set_at (int reg, int unsignedp)
{
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
+ if (imm_expr.X_add_number >= -0x8000
&& imm_expr.X_add_number < 0x8000)
macro_build (&imm_expr, unsignedp ? "sltiu" : "slti", "t,r,j",
AT, reg, BFD_RELOC_LO16);
}
}
-/* Warn if an expression is not a constant. */
-
-static void
-check_absolute_expr (struct mips_cl_insn *ip, expressionS *ex)
-{
- if (ex->X_op == O_big)
- as_bad (_("unsupported large constant"));
- else if (ex->X_op != O_constant)
- as_bad (_("Instruction %s requires absolute expression"),
- ip->insn_mo->name);
-
- if (HAVE_32BIT_GPRS)
- normalize_constant_expr (ex);
-}
-
/* Count the leading zeroes by performing a binary chop. This is a
bulky bit of source, but performance is a LOT better for the
majority of values than a simple loop to count the bits:
char value[32];
sprintf_vma (value, ep->X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
return;
}
if (ep->X_add_number == 3)
generic_bignum[3] = 0;
else if (ep->X_add_number > 4)
- as_bad (_("Number larger than 64 bits"));
+ as_bad (_("number larger than 64 bits"));
lo32.X_op = O_constant;
lo32.X_add_number = generic_bignum[0] + (generic_bignum[1] << 16);
hi32.X_op = O_constant;
abort ();
if (!mips_opts.at && *used_at == 1)
- as_bad (_("Macro used $at after \".set noat\""));
+ as_bad (_("macro used $at after \".set noat\""));
}
/* Move the contents of register SOURCE into register DEST. */
static void
macro (struct mips_cl_insn *ip, char *str)
{
- unsigned int treg, sreg, dreg, breg;
+ const struct mips_operand_array *operands;
+ unsigned int breg, i;
unsigned int tempreg;
int mask;
int used_at = 0;
int off;
int hold_mips_optimize;
unsigned int align;
+ unsigned int op[MAX_OPERANDS];
gas_assert (! mips_opts.mips16);
- treg = EXTRACT_OPERAND (mips_opts.micromips, RT, *ip);
- dreg = EXTRACT_OPERAND (mips_opts.micromips, RD, *ip);
- sreg = breg = EXTRACT_OPERAND (mips_opts.micromips, RS, *ip);
+ operands = insn_operands (ip);
+ for (i = 0; i < MAX_OPERANDS; i++)
+ if (operands->operand[i])
+ op[i] = insn_extract_operand (ip, operands->operand[i]);
+ else
+ op[i] = -1;
+
mask = ip->insn_mo->mask;
label_expr.X_op = O_constant;
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = 8;
- macro_build (&label_expr, "bgez", "s,p", sreg);
- if (dreg == sreg)
+ macro_build (&label_expr, "bgez", "s,p", op[1]);
+ if (op[0] == op[1])
macro_build (NULL, "nop", "");
else
- move_register (dreg, sreg);
- macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", dreg, 0, sreg);
+ move_register (op[0], op[1]);
+ macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", op[0], 0, op[1]);
if (mips_opts.micromips)
micromips_add_label ();
s2 = "dadd";
if (!mips_opts.micromips)
goto do_addi;
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x200
+ if (imm_expr.X_add_number >= -0x200
&& imm_expr.X_add_number < 0x200)
{
- macro_build (NULL, s, "t,r,.", treg, sreg, imm_expr.X_add_number);
+ macro_build (NULL, s, "t,r,.", op[0], op[1],
+ (int) imm_expr.X_add_number);
break;
}
goto do_addi_i;
s = "daddiu";
s2 = "daddu";
do_addi:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
+ if (imm_expr.X_add_number >= -0x8000
&& imm_expr.X_add_number < 0x8000)
{
- macro_build (&imm_expr, s, "t,r,j", treg, sreg, BFD_RELOC_LO16);
+ macro_build (&imm_expr, s, "t,r,j", op[0], op[1], BFD_RELOC_LO16);
break;
}
do_addi_i:
used_at = 1;
load_register (AT, &imm_expr, dbl);
- macro_build (NULL, s2, "d,v,t", treg, sreg, AT);
+ macro_build (NULL, s2, "d,v,t", op[0], op[1], AT);
break;
case M_AND_I:
s = "xori";
s2 = "xor";
do_bit:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= 0
+ if (imm_expr.X_add_number >= 0
&& imm_expr.X_add_number < 0x10000)
{
if (mask != M_NOR_I)
- macro_build (&imm_expr, s, "t,r,i", treg, sreg, BFD_RELOC_LO16);
+ macro_build (&imm_expr, s, "t,r,i", op[0], op[1], BFD_RELOC_LO16);
else
{
macro_build (&imm_expr, "ori", "t,r,i",
- treg, sreg, BFD_RELOC_LO16);
- macro_build (NULL, "nor", "d,v,t", treg, treg, 0);
+ op[0], op[1], BFD_RELOC_LO16);
+ macro_build (NULL, "nor", "d,v,t", op[0], op[0], 0);
}
break;
}
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s2, "d,v,t", treg, sreg, AT);
+ macro_build (NULL, s2, "d,v,t", op[0], op[1], AT);
break;
case M_BALIGN:
macro_build (NULL, "nop", "");
break;
case 2:
- macro_build (NULL, "packrl.ph", "d,s,t", treg, treg, sreg);
+ macro_build (NULL, "packrl.ph", "d,s,t", op[0], op[0], op[1]);
break;
case 1:
case 3:
- macro_build (NULL, "balign", "t,s,2", treg, sreg,
+ macro_build (NULL, "balign", "t,s,2", op[0], op[1],
(int) imm_expr.X_add_number);
break;
default:
case M_BEQL_I:
case M_BNE_I:
case M_BNEL_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- treg = 0;
+ if (imm_expr.X_add_number == 0)
+ op[1] = 0;
else
{
- treg = AT;
+ op[1] = AT;
used_at = 1;
- load_register (treg, &imm_expr, HAVE_64BIT_GPRS);
+ load_register (op[1], &imm_expr, HAVE_64BIT_GPRS);
}
/* Fall through. */
case M_BEQL:
case M_BNEL:
- macro_build_branch_rsrt (mask, &offset_expr, sreg, treg);
+ macro_build_branch_rsrt (mask, &offset_expr, op[0], op[1]);
break;
case M_BGEL:
likely = 1;
case M_BGE:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, treg);
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[1]);
else
{
used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
+ macro_build (NULL, "slt", "d,v,t", AT, op[0], op[1]);
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
&offset_expr, AT, ZERO);
}
case M_BLEZL:
case M_BLTZL:
case M_BLTZALL:
- macro_build_branch_rs (mask, &offset_expr, sreg);
+ macro_build_branch_rs (mask, &offset_expr, op[0]);
break;
case M_BGTL_I:
likely = 1;
case M_BGT_I:
/* Check for > max integer. */
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number >= GPR_SMAX)
+ if (imm_expr.X_add_number >= GPR_SMAX)
{
do_false:
/* Result is always false. */
macro_build_branch_rsrt (M_BNEL, &offset_expr, ZERO, ZERO);
break;
}
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
++imm_expr.X_add_number;
/* FALLTHROUGH */
case M_BGE_I:
case M_BGEL_I:
if (mask == M_BGEL_I)
likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ if (imm_expr.X_add_number == 0)
{
macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ,
- &offset_expr, sreg);
+ &offset_expr, op[0]);
break;
}
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ if (imm_expr.X_add_number == 1)
{
macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ,
- &offset_expr, sreg);
+ &offset_expr, op[0]);
break;
}
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number <= GPR_SMIN)
+ if (imm_expr.X_add_number <= GPR_SMIN)
{
do_true:
/* result is always true */
- as_warn (_("Branch %s is always true"), ip->insn_mo->name);
+ as_warn (_("branch %s is always true"), ip->insn_mo->name);
macro_build (&offset_expr, "b", "p");
break;
}
used_at = 1;
- set_at (sreg, 0);
+ set_at (op[0], 0);
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
&offset_expr, AT, ZERO);
break;
case M_BGEUL:
likely = 1;
case M_BGEU:
- if (treg == 0)
+ if (op[1] == 0)
goto do_true;
- else if (sreg == 0)
+ else if (op[0] == 0)
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, ZERO, treg);
+ &offset_expr, ZERO, op[1]);
else
{
used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
+ macro_build (NULL, "sltu", "d,v,t", AT, op[0], op[1]);
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
&offset_expr, AT, ZERO);
}
case M_BGTUL_I:
likely = 1;
case M_BGTU_I:
- if (sreg == 0
+ if (op[0] == 0
|| (HAVE_32BIT_GPRS
- && imm_expr.X_op == O_constant
&& imm_expr.X_add_number == -1))
goto do_false;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
++imm_expr.X_add_number;
/* FALLTHROUGH */
case M_BGEU_I:
case M_BGEUL_I:
if (mask == M_BGEUL_I)
likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ if (imm_expr.X_add_number == 0)
goto do_true;
- else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ else if (imm_expr.X_add_number == 1)
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, sreg, ZERO);
+ &offset_expr, op[0], ZERO);
else
{
used_at = 1;
- set_at (sreg, 1);
+ set_at (op[0], 1);
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
&offset_expr, AT, ZERO);
}
case M_BGTL:
likely = 1;
case M_BGT:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, treg);
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[1]);
else
{
used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
+ macro_build (NULL, "slt", "d,v,t", AT, op[1], op[0]);
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
&offset_expr, AT, ZERO);
}
case M_BGTUL:
likely = 1;
case M_BGTU:
- if (treg == 0)
+ if (op[1] == 0)
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, sreg, ZERO);
- else if (sreg == 0)
+ &offset_expr, op[0], ZERO);
+ else if (op[0] == 0)
goto do_false;
else
{
used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
+ macro_build (NULL, "sltu", "d,v,t", AT, op[1], op[0]);
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
&offset_expr, AT, ZERO);
}
case M_BLEL:
likely = 1;
case M_BLE:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, treg);
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, op[1]);
else
{
used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, treg, sreg);
+ macro_build (NULL, "slt", "d,v,t", AT, op[1], op[0]);
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
&offset_expr, AT, ZERO);
}
case M_BLEL_I:
likely = 1;
case M_BLE_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number >= GPR_SMAX)
+ if (imm_expr.X_add_number >= GPR_SMAX)
goto do_true;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
++imm_expr.X_add_number;
/* FALLTHROUGH */
case M_BLT_I:
case M_BLTL_I:
if (mask == M_BLTL_I)
likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
- macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, sreg);
- else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
- macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, sreg);
+ if (imm_expr.X_add_number == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[0]);
+ else if (imm_expr.X_add_number == 1)
+ macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[0]);
else
{
used_at = 1;
- set_at (sreg, 0);
+ set_at (op[0], 0);
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
&offset_expr, AT, ZERO);
}
case M_BLEUL:
likely = 1;
case M_BLEU:
- if (treg == 0)
+ if (op[1] == 0)
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, sreg, ZERO);
- else if (sreg == 0)
+ &offset_expr, op[0], ZERO);
+ else if (op[0] == 0)
goto do_true;
else
{
used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, treg, sreg);
+ macro_build (NULL, "sltu", "d,v,t", AT, op[1], op[0]);
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
&offset_expr, AT, ZERO);
}
case M_BLEUL_I:
likely = 1;
case M_BLEU_I:
- if (sreg == 0
+ if (op[0] == 0
|| (HAVE_32BIT_GPRS
- && imm_expr.X_op == O_constant
&& imm_expr.X_add_number == -1))
goto do_true;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
++imm_expr.X_add_number;
/* FALLTHROUGH */
case M_BLTU_I:
case M_BLTUL_I:
if (mask == M_BLTUL_I)
likely = 1;
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ if (imm_expr.X_add_number == 0)
goto do_false;
- else if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ else if (imm_expr.X_add_number == 1)
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
- &offset_expr, sreg, ZERO);
+ &offset_expr, op[0], ZERO);
else
{
used_at = 1;
- set_at (sreg, 1);
+ set_at (op[0], 1);
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
&offset_expr, AT, ZERO);
}
case M_BLTL:
likely = 1;
case M_BLT:
- if (treg == 0)
- macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, sreg);
- else if (sreg == 0)
- macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, treg);
+ if (op[1] == 0)
+ macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[0]);
+ else if (op[0] == 0)
+ macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, op[1]);
else
{
used_at = 1;
- macro_build (NULL, "slt", "d,v,t", AT, sreg, treg);
+ macro_build (NULL, "slt", "d,v,t", AT, op[0], op[1]);
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
&offset_expr, AT, ZERO);
}
case M_BLTUL:
likely = 1;
case M_BLTU:
- if (treg == 0)
+ if (op[1] == 0)
goto do_false;
- else if (sreg == 0)
+ else if (op[0] == 0)
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
- &offset_expr, ZERO, treg);
+ &offset_expr, ZERO, op[1]);
else
{
used_at = 1;
- macro_build (NULL, "sltu", "d,v,t", AT, sreg, treg);
+ macro_build (NULL, "sltu", "d,v,t", AT, op[0], op[1]);
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
&offset_expr, AT, ZERO);
}
break;
- case M_DEXT:
- {
- /* Use unsigned arithmetic. */
- addressT pos;
- addressT size;
-
- if (imm_expr.X_op != O_constant || imm2_expr.X_op != O_constant)
- {
- as_bad (_("Unsupported large constant"));
- pos = size = 1;
- }
- else
- {
- pos = imm_expr.X_add_number;
- size = imm2_expr.X_add_number;
- }
-
- if (pos > 63)
- {
- report_bad_range (ip, 3, pos, 0, 63, FALSE);
- pos = 1;
- }
- if (size == 0 || size > 64 || (pos + size - 1) > 63)
- {
- report_bad_field (pos, size);
- size = 1;
- }
-
- if (size <= 32 && pos < 32)
- {
- s = "dext";
- fmt = "t,r,+A,+C";
- }
- else if (size <= 32)
- {
- s = "dextu";
- fmt = "t,r,+E,+H";
- }
- else
- {
- s = "dextm";
- fmt = "t,r,+A,+G";
- }
- macro_build ((expressionS *) NULL, s, fmt, treg, sreg, (int) pos,
- (int) (size - 1));
- }
- break;
-
- case M_DINS:
- {
- /* Use unsigned arithmetic. */
- addressT pos;
- addressT size;
-
- if (imm_expr.X_op != O_constant || imm2_expr.X_op != O_constant)
- {
- as_bad (_("Unsupported large constant"));
- pos = size = 1;
- }
- else
- {
- pos = imm_expr.X_add_number;
- size = imm2_expr.X_add_number;
- }
-
- if (pos > 63)
- {
- report_bad_range (ip, 3, pos, 0, 63, FALSE);
- pos = 1;
- }
- if (size == 0 || size > 64 || (pos + size - 1) > 63)
- {
- report_bad_field (pos, size);
- size = 1;
- }
-
- if (pos < 32 && (pos + size - 1) < 32)
- {
- s = "dins";
- fmt = "t,r,+A,+B";
- }
- else if (pos >= 32)
- {
- s = "dinsu";
- fmt = "t,r,+E,+F";
- }
- else
- {
- s = "dinsm";
- fmt = "t,r,+A,+F";
- }
- macro_build ((expressionS *) NULL, s, fmt, treg, sreg, (int) pos,
- (int) (pos + size - 1));
- }
- break;
-
case M_DDIV_3:
dbl = 1;
case M_DIV_3:
case M_REM_3:
s = "mfhi";
do_div3:
- if (treg == 0)
+ if (op[2] == 0)
{
- as_warn (_("Divide by zero."));
+ as_warn (_("divide by zero"));
if (mips_trap)
macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
else
start_noreorder ();
if (mips_trap)
{
- macro_build (NULL, "teq", TRAP_FMT, treg, ZERO, 7);
- macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", sreg, treg);
+ macro_build (NULL, "teq", TRAP_FMT, op[2], ZERO, 7);
+ macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", op[1], op[2]);
}
else
{
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = 8;
- macro_build (&label_expr, "bne", "s,t,p", treg, ZERO);
- macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", sreg, treg);
+ macro_build (&label_expr, "bne", "s,t,p", op[2], ZERO);
+ macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", op[1], op[2]);
macro_build (NULL, "break", BRK_FMT, 7);
if (mips_opts.micromips)
micromips_add_label ();
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = mips_trap ? (dbl ? 12 : 8) : (dbl ? 20 : 16);
- macro_build (&label_expr, "bne", "s,t,p", treg, AT);
+ macro_build (&label_expr, "bne", "s,t,p", op[2], AT);
if (dbl)
{
expr1.X_add_number = 1;
}
if (mips_trap)
{
- macro_build (NULL, "teq", TRAP_FMT, sreg, AT, 6);
+ macro_build (NULL, "teq", TRAP_FMT, op[1], AT, 6);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
end_noreorder ();
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = 8;
- macro_build (&label_expr, "bne", "s,t,p", sreg, AT);
+ macro_build (&label_expr, "bne", "s,t,p", op[1], AT);
macro_build (NULL, "nop", "");
/* We want to close the noreorder block as soon as possible, so
}
if (mips_opts.micromips)
micromips_add_label ();
- macro_build (NULL, s, MFHL_FMT, dreg);
+ macro_build (NULL, s, MFHL_FMT, op[0]);
break;
case M_DIV_3I:
s = "ddivu";
s2 = "mfhi";
do_divi:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ if (imm_expr.X_add_number == 0)
{
- as_warn (_("Divide by zero."));
+ as_warn (_("divide by zero"));
if (mips_trap)
macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
else
macro_build (NULL, "break", BRK_FMT, 7);
break;
}
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
+ if (imm_expr.X_add_number == 1)
{
if (strcmp (s2, "mflo") == 0)
- move_register (dreg, sreg);
+ move_register (op[0], op[1]);
else
- move_register (dreg, ZERO);
+ move_register (op[0], ZERO);
break;
}
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number == -1
- && s[strlen (s) - 1] != 'u')
+ if (imm_expr.X_add_number == -1 && s[strlen (s) - 1] != 'u')
{
if (strcmp (s2, "mflo") == 0)
- {
- macro_build (NULL, dbl ? "dneg" : "neg", "d,w", dreg, sreg);
- }
+ macro_build (NULL, dbl ? "dneg" : "neg", "d,w", op[0], op[1]);
else
- move_register (dreg, ZERO);
+ move_register (op[0], ZERO);
break;
}
used_at = 1;
load_register (AT, &imm_expr, dbl);
- macro_build (NULL, s, "z,s,t", sreg, AT);
- macro_build (NULL, s2, MFHL_FMT, dreg);
+ macro_build (NULL, s, "z,s,t", op[1], AT);
+ macro_build (NULL, s2, MFHL_FMT, op[0]);
break;
case M_DIVU_3:
start_noreorder ();
if (mips_trap)
{
- macro_build (NULL, "teq", TRAP_FMT, treg, ZERO, 7);
- macro_build (NULL, s, "z,s,t", sreg, treg);
+ macro_build (NULL, "teq", TRAP_FMT, op[2], ZERO, 7);
+ macro_build (NULL, s, "z,s,t", op[1], op[2]);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
end_noreorder ();
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = 8;
- macro_build (&label_expr, "bne", "s,t,p", treg, ZERO);
- macro_build (NULL, s, "z,s,t", sreg, treg);
+ macro_build (&label_expr, "bne", "s,t,p", op[2], ZERO);
+ macro_build (NULL, s, "z,s,t", op[1], op[2]);
/* We want to close the noreorder block as soon as possible, so
that later insns are available for delay slot filling. */
if (mips_opts.micromips)
micromips_add_label ();
}
- macro_build (NULL, s2, MFHL_FMT, dreg);
+ macro_build (NULL, s2, MFHL_FMT, op[0]);
break;
case M_DLCA_AB:
/* Load the address of a symbol into a register. If breg is not
zero, we then add a base register to it. */
+ breg = op[2];
if (dbl && HAVE_32BIT_GPRS)
as_warn (_("dla used to load 32-bit register"));
if (small_offset_p (0, align, 16))
{
- macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", treg, breg,
+ macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", op[0], breg,
-1, offset_reloc[0], offset_reloc[1], offset_reloc[2]);
break;
}
- if (mips_opts.at && (treg == breg))
+ if (mips_opts.at && (op[0] == breg))
{
tempreg = AT;
used_at = 1;
}
else
- {
- tempreg = treg;
- }
+ tempreg = op[0];
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad (_("Expression too complex"));
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
relax_switch ();
}
if (!IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
- as_bad (_("Offset too large"));
+ as_bad (_("offset too large"));
macro_build_lui (&offset_expr, tempreg);
macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
tempreg, tempreg, BFD_RELOC_LO16);
current AT (from the global offset table) and the
register into the register now, and pretend we were
not using a base register. */
- if (breg == treg)
+ if (breg == op[0])
{
load_delay_nop ();
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
+ op[0], AT, breg);
breg = 0;
- tempreg = treg;
+ tempreg = op[0];
}
add_got_offset_hilo (tempreg, &offset_expr, AT);
used_at = 1;
}
else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
{
+ unsigned int dreg;
+
/* If we are going to add in a base register, and the
target register and the base register are the same,
then we are using AT as a temporary register. Since
current AT (from the global offset table) and the
register into the register now, and pretend we were
not using a base register. */
- if (breg != treg)
+ if (breg != op[0])
dreg = tempreg;
else
{
gas_assert (tempreg == AT);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- dreg = treg;
+ op[0], AT, breg);
+ dreg = op[0];
add_breg_early = 1;
}
if (add_breg_early)
{
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, tempreg, breg);
+ op[0], tempreg, breg);
breg = 0;
- tempreg = treg;
+ tempreg = op[0];
}
relax_end ();
}
}
else
{
+ unsigned int dreg;
+
/* If we are going to add in a base register, and the
target register and the base register are the same,
then we are using AT as a temporary register. Since
current AT (from the global offset table) and the
register into the register now, and pretend we were
not using a base register. */
- if (breg != treg)
+ if (breg != op[0])
dreg = tempreg;
else
{
gas_assert (tempreg == AT);
load_delay_nop ();
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- dreg = treg;
+ op[0], AT, breg);
+ dreg = op[0];
}
load_register (AT, &expr1, HAVE_64BIT_ADDRESSES);
}
else
{
- if (breg == treg)
+ if (breg == op[0])
{
/* We must add in the base register now, as in the
external symbol case. */
gas_assert (tempreg == AT);
load_delay_nop ();
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- tempreg = treg;
+ op[0], AT, breg);
+ tempreg = op[0];
/* We set breg to 0 because we have arranged to add
it in in both cases. */
breg = 0;
}
else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000))
{
+ unsigned int dreg;
+
/* If we are going to add in a base register, and the
target register and the base register are the same,
then we are using AT as a temporary register. Since
current AT (from the global offset table) and the
register into the register now, and pretend we were
not using a base register. */
- if (breg != treg)
+ if (breg != op[0])
dreg = tempreg;
else
{
gas_assert (tempreg == AT);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, AT, breg);
- dreg = treg;
+ op[0], AT, breg);
+ dreg = op[0];
add_breg_early = 1;
}
if (add_breg_early)
{
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
- treg, tempreg, breg);
+ op[0], tempreg, breg);
breg = 0;
- tempreg = treg;
+ tempreg = op[0];
}
relax_end ();
}
abort ();
if (breg != 0)
- macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", treg, tempreg, breg);
+ macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", op[0], tempreg, breg);
break;
case M_MSGSND:
gas_assert (!mips_opts.micromips);
- macro_build (NULL, "c2", "C", (treg << 16) | 0x01);
+ macro_build (NULL, "c2", "C", (op[0] << 16) | 0x01);
break;
case M_MSGLD:
case M_MSGLD_T:
gas_assert (!mips_opts.micromips);
- macro_build (NULL, "c2", "C", (treg << 16) | 0x02);
+ macro_build (NULL, "c2", "C", (op[0] << 16) | 0x02);
break;
case M_MSGWAIT:
case M_MSGWAIT_T:
gas_assert (!mips_opts.micromips);
- macro_build (NULL, "c2", "C", (treg << 16) | 0x03);
+ macro_build (NULL, "c2", "C", (op[0] << 16) | 0x03);
break;
case M_J_A:
generating PIC code they expand to multi-instruction
sequences. Normally they are simple instructions. */
case M_JALS_1:
- dreg = RA;
+ op[1] = op[0];
+ op[0] = RA;
/* Fall through. */
case M_JALS_2:
gas_assert (mips_opts.micromips);
if (mips_opts.insn32)
{
- as_bad (_("Opcode not supported in the `insn32' mode `%s'"), str);
+ as_bad (_("opcode not supported in the `insn32' mode `%s'"), str);
break;
}
jals = 1;
goto jal;
case M_JAL_1:
- dreg = RA;
+ op[1] = op[0];
+ op[0] = RA;
/* Fall through. */
case M_JAL_2:
jal:
s = jals ? "jalrs" : "jalr";
if (mips_opts.micromips
&& !mips_opts.insn32
- && dreg == RA
+ && op[0] == RA
&& !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
- macro_build (NULL, s, "mj", sreg);
+ macro_build (NULL, s, "mj", op[1]);
else
- macro_build (NULL, s, JALR_FMT, dreg, sreg);
+ macro_build (NULL, s, JALR_FMT, op[0], op[1]);
}
else
{
int cprestore = (mips_pic == SVR4_PIC && !HAVE_NEWABI
&& mips_cprestore_offset >= 0);
- if (sreg != PIC_CALL_REG)
+ if (op[1] != PIC_CALL_REG)
as_warn (_("MIPS PIC call to register other than $25"));
s = ((mips_opts.micromips
? "jalrs" : "jalr");
if (mips_opts.micromips
&& !mips_opts.insn32
- && dreg == RA
+ && op[0] == RA
&& !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT))
- macro_build (NULL, s, "mj", sreg);
+ macro_build (NULL, s, "mj", op[1]);
else
- macro_build (NULL, s, JALR_FMT, dreg, sreg);
+ macro_build (NULL, s, JALR_FMT, op[0], op[1]);
if (mips_pic == SVR4_PIC && !HAVE_NEWABI)
{
if (mips_cprestore_offset < 0)
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
else
{
if (!mips_frame_reg_valid)
{
- as_warn (_("No .frame pseudo-op used in PIC code"));
+ as_warn (_("no .frame pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_frame_reg_valid = 1;
}
if (!mips_cprestore_valid)
{
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_cprestore_valid = 1;
}
gas_assert (mips_opts.micromips);
if (mips_opts.insn32)
{
- as_bad (_("Opcode not supported in the `insn32' mode `%s'"), str);
+ as_bad (_("opcode not supported in the `insn32' mode `%s'"), str);
break;
}
jals = 1;
macro_build_jalr (&offset_expr, mips_cprestore_offset >= 0);
if (mips_cprestore_offset < 0)
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
else
{
if (!mips_frame_reg_valid)
{
- as_warn (_("No .frame pseudo-op used in PIC code"));
+ as_warn (_("no .frame pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_frame_reg_valid = 1;
}
if (!mips_cprestore_valid)
{
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_cprestore_valid = 1;
}
}
}
else if (mips_pic == VXWORKS_PIC)
- as_bad (_("Non-PIC jump used in PIC library"));
+ as_bad (_("non-PIC jump used in PIC library"));
else
abort ();
goto ld_st;
case M_ACLR_AB:
s = "aclr";
- treg = EXTRACT_OPERAND (mips_opts.micromips, 3BITPOS, *ip);
fmt = "\\,~(b)";
offbits = 12;
goto ld_st;
case M_ASET_AB:
s = "aset";
- treg = EXTRACT_OPERAND (mips_opts.micromips, 3BITPOS, *ip);
fmt = "\\,~(b)";
offbits = 12;
goto ld_st;
goto ld_st;
case M_LQC2_AB:
s = "lqc2";
- fmt = "E,o(b)";
+ fmt = "+7,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
goto ld_st;
ld:
/* We don't want to use $0 as tempreg. */
- if (breg == treg + lp || treg + lp == ZERO)
+ if (op[2] == op[0] + lp || op[0] + lp == ZERO)
goto ld_st;
else
- tempreg = treg + lp;
+ tempreg = op[0] + lp;
goto ld_noat;
case M_SB_AB:
goto ld_st;
case M_SQC2_AB:
s = "sqc2";
- fmt = "E,o(b)";
+ fmt = "+7,o(b)";
/* Itbl support may require additional care here. */
coproc = 1;
goto ld_st;
ld_st:
tempreg = AT;
ld_noat:
+ breg = op[2];
if (small_offset_p (0, align, 16))
{
/* The first case exists for M_LD_AB and M_SD_AB, which are
macros for o32 but which should act like normal instructions
otherwise. */
if (offbits == 16)
- macro_build (&offset_expr, s, fmt, treg, -1, offset_reloc[0],
+ macro_build (&offset_expr, s, fmt, op[0], -1, offset_reloc[0],
offset_reloc[1], offset_reloc[2], breg);
else if (small_offset_p (0, align, offbits))
{
if (offbits == 0)
- macro_build (NULL, s, fmt, treg, breg);
+ macro_build (NULL, s, fmt, op[0], breg);
else
- macro_build (NULL, s, fmt, treg,
+ macro_build (NULL, s, fmt, op[0],
(int) offset_expr.X_add_number, breg);
}
else
tempreg, breg, -1, offset_reloc[0],
offset_reloc[1], offset_reloc[2]);
if (offbits == 0)
- macro_build (NULL, s, fmt, treg, tempreg);
+ macro_build (NULL, s, fmt, op[0], tempreg);
else
- macro_build (NULL, s, fmt, treg, 0, tempreg);
+ macro_build (NULL, s, fmt, op[0], 0, tempreg);
}
break;
}
if (offset_expr.X_op != O_constant
&& offset_expr.X_op != O_symbol)
{
- as_bad (_("Expression too complex"));
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
char value [32];
sprintf_vma (value, offset_expr.X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
}
/* A constant expression in PIC code can be handled just as it
if (offset_expr.X_add_number != 0)
macro_build (&offset_expr, ADDRESS_ADDI_INSN,
"t,r,j", tempreg, tempreg, BFD_RELOC_LO16);
- macro_build (NULL, s, fmt, treg, tempreg);
+ macro_build (NULL, s, fmt, op[0], tempreg);
}
else if (offbits == 16)
- macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16, tempreg);
+ macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
else
- macro_build (NULL, s, fmt, treg,
+ macro_build (NULL, s, fmt, op[0],
(int) offset_expr.X_add_number, tempreg);
}
else if (offbits != 16)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
if (offbits == 0)
- macro_build (NULL, s, fmt, treg, tempreg);
+ macro_build (NULL, s, fmt, op[0], tempreg);
else
- macro_build (NULL, s, fmt, treg, 0, tempreg);
+ macro_build (NULL, s, fmt, op[0], 0, tempreg);
}
else if (mips_pic == NO_PIC)
{
/* If this is a reference to a GP relative symbol, and there
is no base register, we want
- <op> $treg,<sym>($gp) (BFD_RELOC_GPREL16)
+ <op> op[0],<sym>($gp) (BFD_RELOC_GPREL16)
Otherwise, if there is no base register, we want
lui $tempreg,<sym> (BFD_RELOC_HI16_S)
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
If we have a constant, we need two instructions anyhow,
so we always use the latter form.
If we have a base register, and this is a reference to a
GP relative symbol, we want
addu $tempreg,$breg,$gp
- <op> $treg,<sym>($tempreg) (BFD_RELOC_GPREL16)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_GPREL16)
Otherwise we want
lui $tempreg,<sym> (BFD_RELOC_HI16_S)
addu $tempreg,$tempreg,$breg
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
With a constant we always use the latter case.
With 64bit address space and no base register and $at usable,
daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
dsll32 $tempreg,0
daddu $tempreg,$at
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
If we have a base register, we want
lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
lui $at,<sym> (BFD_RELOC_HI16_S)
daddu $at,$breg
dsll32 $tempreg,0
daddu $tempreg,$at
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
Without $at we can't generate the optimal path for superscalar
processors here since this would require two temporary registers.
dsll $tempreg,16
daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
dsll $tempreg,16
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
If we have a base register, we want
lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST)
daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER)
daddiu $tempreg,<sym> (BFD_RELOC_HI16_S)
dsll $tempreg,16
daddu $tempreg,$tempreg,$breg
- <op> $treg,<sym>($tempreg) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16)
For GP relative symbols in 64bit address space we can use
the same sequence as in 32bit address space. */
relax_start (offset_expr.X_add_symbol);
if (breg == 0)
{
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_GPREL16, mips_gp_register);
}
else
{
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, breg, mips_gp_register);
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_GPREL16, tempreg);
}
relax_switch ();
macro_build (NULL, "daddu", "d,v,t", AT, AT, breg);
macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0);
macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT);
- macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_LO16,
+ macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_LO16,
tempreg);
used_at = 1;
}
if (breg != 0)
macro_build (NULL, "daddu", "d,v,t",
tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_LO16, tempreg);
}
&& !nopic_need_relax (offset_expr.X_add_symbol, 1))
{
relax_start (offset_expr.X_add_symbol);
- macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_GPREL16,
+ macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_GPREL16,
mips_gp_register);
relax_switch ();
}
macro_build_lui (&offset_expr, tempreg);
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_LO16, tempreg);
if (mips_relax.sequence)
relax_end ();
relax_start (offset_expr.X_add_symbol);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, breg, mips_gp_register);
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_GPREL16, tempreg);
relax_switch ();
}
macro_build_lui (&offset_expr, tempreg);
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_LO16, tempreg);
if (mips_relax.sequence)
relax_end ();
/* If this is a reference to an external symbol, we want
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
- <op> $treg,0($tempreg)
+ <op> op[0],0($tempreg)
Otherwise we want
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- <op> $treg,0($tempreg)
+ <op> op[0],0($tempreg)
For NewABI, we want
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
- <op> $treg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST)
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST)
If there is a base register, we add it to $tempreg before
the <op>. If there is a constant, we stick it in the
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_MIPS_GOT_OFST, tempreg);
break;
}
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
- macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
+ macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
}
else if (mips_big_got && !HAVE_NEWABI)
{
lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
addu $tempreg,$tempreg,$gp
lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- <op> $treg,0($tempreg)
+ <op> op[0],0($tempreg)
Otherwise we want
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- <op> $treg,0($tempreg)
+ <op> op[0],0($tempreg)
If there is a base register, we add it to $tempreg before
the <op>. If there is a constant, we stick it in the
<op> instruction. We don't handle constants larger than
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
- macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
+ macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
}
else if (mips_big_got && HAVE_NEWABI)
{
lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
add $tempreg,$tempreg,$gp
lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
- <op> $treg,<ofst>($tempreg)
+ <op> op[0],<ofst>($tempreg)
Otherwise, for local symbols, we want:
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE)
- <op> $treg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST) */
+ <op> op[0],<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST) */
gas_assert (offset_expr.X_op == O_symbol);
expr1.X_add_number = offset_expr.X_add_number;
offset_expr.X_add_number = 0;
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
- macro_build (&expr1, s, fmt, treg, BFD_RELOC_LO16, tempreg);
+ macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg);
relax_switch ();
offset_expr.X_add_number = expr1.X_add_number;
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t",
tempreg, tempreg, breg);
- macro_build (&offset_expr, s, fmt, treg,
+ macro_build (&offset_expr, s, fmt, op[0],
BFD_RELOC_MIPS_GOT_OFST, tempreg);
relax_end ();
}
gas_assert (mips_opts.insn32);
start_noreorder ();
macro_build (NULL, "jr", "s", RA);
- expr1.X_add_number = EXTRACT_OPERAND (1, IMMP, *ip) << 2;
+ expr1.X_add_number = op[0] << 2;
macro_build (&expr1, "addiu", "t,r,j", SP, SP, BFD_RELOC_LO16);
end_noreorder ();
break;
case M_JRC:
gas_assert (mips_opts.micromips);
gas_assert (mips_opts.insn32);
- macro_build (NULL, "jr", "s", sreg);
+ macro_build (NULL, "jr", "s", op[0]);
if (mips_opts.noreorder)
macro_build (NULL, "nop", "");
break;
case M_LI:
case M_LI_S:
- load_register (treg, &imm_expr, 0);
+ load_register (op[0], &imm_expr, 0);
break;
case M_DLI:
- load_register (treg, &imm_expr, 1);
+ load_register (op[0], &imm_expr, 1);
break;
case M_LI_SS:
{
used_at = 1;
load_register (AT, &imm_expr, 0);
- macro_build (NULL, "mtc1", "t,G", AT, treg);
+ macro_build (NULL, "mtc1", "t,G", AT, op[0]);
break;
}
else
{
- gas_assert (offset_expr.X_op == O_symbol
+ gas_assert (imm_expr.X_op == O_absent
+ && offset_expr.X_op == O_symbol
&& strcmp (segment_name (S_GET_SEGMENT
(offset_expr.X_add_symbol)),
".lit4") == 0
&& offset_expr.X_add_number == 0);
- macro_build (&offset_expr, "lwc1", "T,o(b)", treg,
+ macro_build (&offset_expr, "lwc1", "T,o(b)", op[0],
BFD_RELOC_MIPS_LITERAL, mips_gp_register);
break;
}
wide, IMM_EXPR is the entire value. Otherwise IMM_EXPR is the high
order 32 bits of the value and the low order 32 bits are either
zero or in OFFSET_EXPR. */
- if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
+ if (imm_expr.X_op == O_constant)
{
if (HAVE_64BIT_GPRS)
- load_register (treg, &imm_expr, 1);
+ load_register (op[0], &imm_expr, 1);
else
{
int hreg, lreg;
if (target_big_endian)
{
- hreg = treg;
- lreg = treg + 1;
+ hreg = op[0];
+ lreg = op[0] + 1;
}
else
{
- hreg = treg + 1;
- lreg = treg;
+ hreg = op[0] + 1;
+ lreg = op[0];
}
if (hreg <= 31)
}
break;
}
+ gas_assert (imm_expr.X_op == O_absent);
/* We know that sym is in the .rdata section. First we get the
upper 16 bits of the address. */
if (HAVE_64BIT_GPRS)
{
used_at = 1;
- macro_build (&offset_expr, "ld", "t,o(b)", treg, BFD_RELOC_LO16, AT);
+ macro_build (&offset_expr, "ld", "t,o(b)", op[0],
+ BFD_RELOC_LO16, AT);
}
else
{
used_at = 1;
- macro_build (&offset_expr, "lw", "t,o(b)", treg, BFD_RELOC_LO16, AT);
- if (treg != RA)
+ macro_build (&offset_expr, "lw", "t,o(b)", op[0],
+ BFD_RELOC_LO16, AT);
+ if (op[0] != RA)
{
/* FIXME: How in the world do we deal with the possible
overflow here? */
offset_expr.X_add_number += 4;
macro_build (&offset_expr, "lw", "t,o(b)",
- treg + 1, BFD_RELOC_LO16, AT);
+ op[0] + 1, BFD_RELOC_LO16, AT);
}
}
break;
bits wide as well. Otherwise IMM_EXPR is the high order 32 bits of
the value and the low order 32 bits are either zero or in
OFFSET_EXPR. */
- if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
+ if (imm_expr.X_op == O_constant)
{
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_FPRS);
if (HAVE_64BIT_FPRS)
{
gas_assert (HAVE_64BIT_GPRS);
- macro_build (NULL, "dmtc1", "t,S", AT, treg);
+ macro_build (NULL, "dmtc1", "t,S", AT, op[0]);
}
else
{
- macro_build (NULL, "mtc1", "t,G", AT, treg + 1);
+ macro_build (NULL, "mtc1", "t,G", AT, op[0] + 1);
if (offset_expr.X_op == O_absent)
- macro_build (NULL, "mtc1", "t,G", 0, treg);
+ macro_build (NULL, "mtc1", "t,G", 0, op[0]);
else
{
gas_assert (offset_expr.X_op == O_constant);
load_register (AT, &offset_expr, 0);
- macro_build (NULL, "mtc1", "t,G", AT, treg);
+ macro_build (NULL, "mtc1", "t,G", AT, op[0]);
}
}
break;
}
- gas_assert (offset_expr.X_op == O_symbol
+ gas_assert (imm_expr.X_op == O_absent
+ && offset_expr.X_op == O_symbol
&& offset_expr.X_add_number == 0);
s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol));
if (strcmp (s, ".lit8") == 0)
{
- breg = mips_gp_register;
+ op[2] = mips_gp_register;
offset_reloc[0] = BFD_RELOC_MIPS_LITERAL;
offset_reloc[1] = BFD_RELOC_UNUSED;
offset_reloc[2] = BFD_RELOC_UNUSED;
macro_build_lui (&offset_expr, AT);
}
- breg = AT;
+ op[2] = AT;
offset_reloc[0] = BFD_RELOC_LO16;
offset_reloc[1] = BFD_RELOC_UNUSED;
offset_reloc[2] = BFD_RELOC_UNUSED;
if (!target_big_endian)
coproc = 0;
+ breg = op[2];
if (small_offset_p (0, align, 16))
{
ep = &offset_expr;
offset_reloc[1] = BFD_RELOC_UNUSED;
offset_reloc[2] = BFD_RELOC_UNUSED;
}
- if (strcmp (s, "lw") == 0 && treg == breg)
+ if (strcmp (s, "lw") == 0 && op[0] == breg)
{
ep->X_add_number += 4;
- macro_build (ep, s, fmt, treg + 1, -1, offset_reloc[0],
+ macro_build (ep, s, fmt, op[0] + 1, -1, offset_reloc[0],
offset_reloc[1], offset_reloc[2], breg);
ep->X_add_number -= 4;
- macro_build (ep, s, fmt, treg, -1, offset_reloc[0],
+ macro_build (ep, s, fmt, op[0], -1, offset_reloc[0],
offset_reloc[1], offset_reloc[2], breg);
}
else
{
- macro_build (ep, s, fmt, coproc ? treg + 1 : treg, -1,
+ macro_build (ep, s, fmt, coproc ? op[0] + 1 : op[0], -1,
offset_reloc[0], offset_reloc[1], offset_reloc[2],
breg);
ep->X_add_number += 4;
- macro_build (ep, s, fmt, coproc ? treg : treg + 1, -1,
+ macro_build (ep, s, fmt, coproc ? op[0] : op[0] + 1, -1,
offset_reloc[0], offset_reloc[1], offset_reloc[2],
breg);
}
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad (_("Expression too complex"));
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
char value [32];
sprintf_vma (value, offset_expr.X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
}
if (mips_pic == NO_PIC || offset_expr.X_op == O_constant)
{
/* If this is a reference to a GP relative symbol, we want
- <op> $treg,<sym>($gp) (BFD_RELOC_GPREL16)
- <op> $treg+1,<sym>+4($gp) (BFD_RELOC_GPREL16)
+ <op> op[0],<sym>($gp) (BFD_RELOC_GPREL16)
+ <op> op[0]+1,<sym>+4($gp) (BFD_RELOC_GPREL16)
If we have a base register, we use this
addu $at,$breg,$gp
- <op> $treg,<sym>($at) (BFD_RELOC_GPREL16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_GPREL16)
+ <op> op[0],<sym>($at) (BFD_RELOC_GPREL16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_GPREL16)
If this is not a GP relative symbol, we want
lui $at,<sym> (BFD_RELOC_HI16_S)
- <op> $treg,<sym>($at) (BFD_RELOC_LO16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($at) (BFD_RELOC_LO16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16)
If there is a base register, we add it to $at after the
lui instruction. If there is a constant, we always use
the last case. */
}
/* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
BFD_RELOC_GPREL16, tempreg);
offset_expr.X_add_number += 4;
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
/* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
BFD_RELOC_GPREL16, tempreg);
mips_optimize = hold_mips_optimize;
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
/* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
BFD_RELOC_LO16, AT);
/* FIXME: How do we handle overflow here? */
offset_expr.X_add_number += 4;
/* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
BFD_RELOC_LO16, AT);
if (mips_relax.sequence)
relax_end ();
/* If this is a reference to an external symbol, we want
lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
- <op> $treg,0($at)
- <op> $treg+1,4($at)
+ <op> op[0],0($at)
+ <op> op[0]+1,4($at)
Otherwise we want
lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
- <op> $treg,<sym>($at) (BFD_RELOC_LO16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($at) (BFD_RELOC_LO16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16)
If there is a base register we add it to $at before the
lwc1 instructions. If there is a constant we include it
in the lwc1 instructions. */
/* Itbl support may require additional care here. */
relax_start (offset_expr.X_add_symbol);
- macro_build (&expr1, s, fmt, coproc ? treg + 1 : treg,
+ macro_build (&expr1, s, fmt, coproc ? op[0] + 1 : op[0],
BFD_RELOC_LO16, AT);
expr1.X_add_number += 4;
- macro_build (&expr1, s, fmt, coproc ? treg : treg + 1,
+ macro_build (&expr1, s, fmt, coproc ? op[0] : op[0] + 1,
BFD_RELOC_LO16, AT);
relax_switch ();
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
BFD_RELOC_LO16, AT);
offset_expr.X_add_number += 4;
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
BFD_RELOC_LO16, AT);
relax_end ();
addu $at,$at,$gp
lw $at,<sym>($at) (BFD_RELOC_MIPS_GOT_LO16)
nop
- <op> $treg,0($at)
- <op> $treg+1,4($at)
+ <op> op[0],0($at)
+ <op> op[0]+1,4($at)
Otherwise we want
lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
- <op> $treg,<sym>($at) (BFD_RELOC_LO16)
- <op> $treg+1,<sym>+4($at) (BFD_RELOC_LO16)
+ <op> op[0],<sym>($at) (BFD_RELOC_LO16)
+ <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16)
If there is a base register we add it to $at before the
lwc1 instructions. If there is a constant we include it
in the lwc1 instructions. */
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
/* Itbl support may require additional care here. */
- macro_build (&expr1, s, fmt, coproc ? treg + 1 : treg,
+ macro_build (&expr1, s, fmt, coproc ? op[0] + 1 : op[0],
BFD_RELOC_LO16, AT);
expr1.X_add_number += 4;
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
/* Itbl support may require additional care here. */
- macro_build (&expr1, s, fmt, coproc ? treg : treg + 1,
+ macro_build (&expr1, s, fmt, coproc ? op[0] : op[0] + 1,
BFD_RELOC_LO16, AT);
mips_optimize = hold_mips_optimize;
expr1.X_add_number -= 4;
if (breg != 0)
macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT);
/* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0],
BFD_RELOC_LO16, AT);
offset_expr.X_add_number += 4;
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
/* Itbl support may require additional care here. */
- macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1,
+ macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1,
BFD_RELOC_LO16, AT);
mips_optimize = hold_mips_optimize;
relax_end ();
break;
case M_MOVE:
- move_register (dreg, sreg);
+ move_register (op[0], op[1]);
break;
case M_MOVEP:
gas_assert (mips_opts.micromips);
gas_assert (mips_opts.insn32);
- dreg = micromips_to_32_reg_h_map1[EXTRACT_OPERAND (1, MH, *ip)];
- breg = micromips_to_32_reg_h_map2[EXTRACT_OPERAND (1, MH, *ip)];
- sreg = micromips_to_32_reg_m_map[EXTRACT_OPERAND (1, MM, *ip)];
- treg = micromips_to_32_reg_n_map[EXTRACT_OPERAND (1, MN, *ip)];
- move_register (dreg, sreg);
- move_register (breg, treg);
+ move_register (micromips_to_32_reg_h_map1[op[0]],
+ micromips_to_32_reg_m_map[op[1]]);
+ move_register (micromips_to_32_reg_h_map2[op[0]],
+ micromips_to_32_reg_n_map[op[2]]);
break;
case M_DMUL:
dbl = 1;
case M_MUL:
if (mips_opts.arch == CPU_R5900)
- {
- macro_build (NULL, dbl ? "dmultu" : "multu", "d,s,t", dreg, sreg, treg);
- }
+ macro_build (NULL, dbl ? "dmultu" : "multu", "d,s,t", op[0], op[1],
+ op[2]);
else
{
- macro_build (NULL, dbl ? "dmultu" : "multu", "s,t", sreg, treg);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ macro_build (NULL, dbl ? "dmultu" : "multu", "s,t", op[1], op[2]);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
}
break;
anyway. */
used_at = 1;
load_register (AT, &imm_expr, dbl);
- macro_build (NULL, dbl ? "dmult" : "mult", "s,t", sreg, AT);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ macro_build (NULL, dbl ? "dmult" : "mult", "s,t", op[1], AT);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
break;
case M_DMULO_I:
used_at = 1;
if (imm)
load_register (AT, &imm_expr, dbl);
- macro_build (NULL, dbl ? "dmult" : "mult", "s,t", sreg, imm ? AT : treg);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
- macro_build (NULL, dbl ? "dsra32" : "sra", SHFT_FMT, dreg, dreg, RA);
+ macro_build (NULL, dbl ? "dmult" : "mult", "s,t",
+ op[1], imm ? AT : op[2]);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
+ macro_build (NULL, dbl ? "dsra32" : "sra", SHFT_FMT, op[0], op[0], 31);
macro_build (NULL, "mfhi", MFHL_FMT, AT);
if (mips_trap)
- macro_build (NULL, "tne", TRAP_FMT, dreg, AT, 6);
+ macro_build (NULL, "tne", TRAP_FMT, op[0], AT, 6);
else
{
if (mips_opts.micromips)
micromips_label_expr (&label_expr);
else
label_expr.X_add_number = 8;
- macro_build (&label_expr, "beq", "s,t,p", dreg, AT);
+ macro_build (&label_expr, "beq", "s,t,p", op[0], AT);
macro_build (NULL, "nop", "");
macro_build (NULL, "break", BRK_FMT, 6);
if (mips_opts.micromips)
micromips_add_label ();
}
end_noreorder ();
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
break;
case M_DMULOU_I:
if (imm)
load_register (AT, &imm_expr, dbl);
macro_build (NULL, dbl ? "dmultu" : "multu", "s,t",
- sreg, imm ? AT : treg);
+ op[1], imm ? AT : op[2]);
macro_build (NULL, "mfhi", MFHL_FMT, AT);
- macro_build (NULL, "mflo", MFHL_FMT, dreg);
+ macro_build (NULL, "mflo", MFHL_FMT, op[0]);
if (mips_trap)
macro_build (NULL, "tne", TRAP_FMT, AT, ZERO, 6);
else
case M_DROL:
if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
{
- if (dreg == sreg)
+ if (op[0] == op[1])
{
tempreg = AT;
used_at = 1;
}
else
- {
- tempreg = dreg;
- }
- macro_build (NULL, "dnegu", "d,w", tempreg, treg);
- macro_build (NULL, "drorv", "d,t,s", dreg, sreg, tempreg);
+ tempreg = op[0];
+ macro_build (NULL, "dnegu", "d,w", tempreg, op[2]);
+ macro_build (NULL, "drorv", "d,t,s", op[0], op[1], tempreg);
break;
}
used_at = 1;
- macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "dsrlv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "dsllv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "dsrlv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "dsllv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
break;
case M_ROL:
if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
{
- if (dreg == sreg)
+ if (op[0] == op[1])
{
tempreg = AT;
used_at = 1;
}
else
- {
- tempreg = dreg;
- }
- macro_build (NULL, "negu", "d,w", tempreg, treg);
- macro_build (NULL, "rorv", "d,t,s", dreg, sreg, tempreg);
+ tempreg = op[0];
+ macro_build (NULL, "negu", "d,w", tempreg, op[2]);
+ macro_build (NULL, "rorv", "d,t,s", op[0], op[1], tempreg);
break;
}
used_at = 1;
- macro_build (NULL, "subu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "srlv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "sllv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, "subu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "srlv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "sllv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
break;
case M_DROL_I:
char *l;
char *rr;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
rot = imm_expr.X_add_number & 0x3f;
if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
{
rot = (64 - rot) & 0x3f;
if (rot >= 32)
- macro_build (NULL, "dror32", SHFT_FMT, dreg, sreg, rot - 32);
+ macro_build (NULL, "dror32", SHFT_FMT, op[0], op[1], rot - 32);
else
- macro_build (NULL, "dror", SHFT_FMT, dreg, sreg, rot);
+ macro_build (NULL, "dror", SHFT_FMT, op[0], op[1], rot);
break;
}
if (rot == 0)
{
- macro_build (NULL, "dsrl", SHFT_FMT, dreg, sreg, 0);
+ macro_build (NULL, "dsrl", SHFT_FMT, op[0], op[1], 0);
break;
}
l = (rot < 0x20) ? "dsll" : "dsll32";
rr = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32";
rot &= 0x1f;
used_at = 1;
- macro_build (NULL, l, SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, rr, SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, l, SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, rr, SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
}
break;
{
unsigned int rot;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
rot = imm_expr.X_add_number & 0x1f;
if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
{
- macro_build (NULL, "ror", SHFT_FMT, dreg, sreg, (32 - rot) & 0x1f);
+ macro_build (NULL, "ror", SHFT_FMT, op[0], op[1],
+ (32 - rot) & 0x1f);
break;
}
if (rot == 0)
{
- macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, 0);
+ macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], 0);
break;
}
used_at = 1;
- macro_build (NULL, "sll", SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, "sll", SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
}
break;
case M_DROR:
if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
{
- macro_build (NULL, "drorv", "d,t,s", dreg, sreg, treg);
+ macro_build (NULL, "drorv", "d,t,s", op[0], op[1], op[2]);
break;
}
used_at = 1;
- macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "dsllv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "dsrlv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "dsllv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "dsrlv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
break;
case M_ROR:
if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
{
- macro_build (NULL, "rorv", "d,t,s", dreg, sreg, treg);
+ macro_build (NULL, "rorv", "d,t,s", op[0], op[1], op[2]);
break;
}
used_at = 1;
- macro_build (NULL, "subu", "d,v,t", AT, ZERO, treg);
- macro_build (NULL, "sllv", "d,t,s", AT, sreg, AT);
- macro_build (NULL, "srlv", "d,t,s", dreg, sreg, treg);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, "subu", "d,v,t", AT, ZERO, op[2]);
+ macro_build (NULL, "sllv", "d,t,s", AT, op[1], AT);
+ macro_build (NULL, "srlv", "d,t,s", op[0], op[1], op[2]);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
break;
case M_DROR_I:
char *l;
char *rr;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
rot = imm_expr.X_add_number & 0x3f;
if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch))
{
if (rot >= 32)
- macro_build (NULL, "dror32", SHFT_FMT, dreg, sreg, rot - 32);
+ macro_build (NULL, "dror32", SHFT_FMT, op[0], op[1], rot - 32);
else
- macro_build (NULL, "dror", SHFT_FMT, dreg, sreg, rot);
+ macro_build (NULL, "dror", SHFT_FMT, op[0], op[1], rot);
break;
}
if (rot == 0)
{
- macro_build (NULL, "dsrl", SHFT_FMT, dreg, sreg, 0);
+ macro_build (NULL, "dsrl", SHFT_FMT, op[0], op[1], 0);
break;
}
rr = (rot < 0x20) ? "dsrl" : "dsrl32";
l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32";
rot &= 0x1f;
used_at = 1;
- macro_build (NULL, rr, SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, l, SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, rr, SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, l, SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
}
break;
{
unsigned int rot;
- if (imm_expr.X_op != O_constant)
- as_bad (_("Improper rotate count"));
rot = imm_expr.X_add_number & 0x1f;
if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch))
{
- macro_build (NULL, "ror", SHFT_FMT, dreg, sreg, rot);
+ macro_build (NULL, "ror", SHFT_FMT, op[0], op[1], rot);
break;
}
if (rot == 0)
{
- macro_build (NULL, "srl", SHFT_FMT, dreg, sreg, 0);
+ macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], 0);
break;
}
used_at = 1;
- macro_build (NULL, "srl", SHFT_FMT, AT, sreg, rot);
- macro_build (NULL, "sll", SHFT_FMT, dreg, sreg, (0x20 - rot) & 0x1f);
- macro_build (NULL, "or", "d,v,t", dreg, dreg, AT);
+ macro_build (NULL, "srl", SHFT_FMT, AT, op[1], rot);
+ macro_build (NULL, "sll", SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
}
break;
case M_SEQ:
- if (sreg == 0)
- macro_build (&expr1, "sltiu", "t,r,j", dreg, treg, BFD_RELOC_LO16);
- else if (treg == 0)
- macro_build (&expr1, "sltiu", "t,r,j", dreg, sreg, BFD_RELOC_LO16);
+ if (op[1] == 0)
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[2], BFD_RELOC_LO16);
+ else if (op[2] == 0)
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[1], BFD_RELOC_LO16);
else
{
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, treg);
- macro_build (&expr1, "sltiu", "t,r,j", dreg, dreg, BFD_RELOC_LO16);
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], op[2]);
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[0], BFD_RELOC_LO16);
}
break;
case M_SEQ_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ if (imm_expr.X_add_number == 0)
{
- macro_build (&expr1, "sltiu", "t,r,j", dreg, sreg, BFD_RELOC_LO16);
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[1], BFD_RELOC_LO16);
break;
}
- if (sreg == 0)
+ if (op[1] == 0)
{
- as_warn (_("Instruction %s: result is always false"),
+ as_warn (_("instruction %s: result is always false"),
ip->insn_mo->name);
- move_register (dreg, 0);
+ move_register (op[0], 0);
break;
}
if (CPU_HAS_SEQ (mips_opts.arch)
&& -512 <= imm_expr.X_add_number
&& imm_expr.X_add_number < 512)
{
- macro_build (NULL, "seqi", "t,r,+Q", dreg, sreg,
+ macro_build (NULL, "seqi", "t,r,+Q", op[0], op[1],
(int) imm_expr.X_add_number);
break;
}
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= 0
+ if (imm_expr.X_add_number >= 0
&& imm_expr.X_add_number < 0x10000)
- {
- macro_build (&imm_expr, "xori", "t,r,i", dreg, sreg, BFD_RELOC_LO16);
- }
- else if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x8000
+ macro_build (&imm_expr, "xori", "t,r,i", op[0], op[1], BFD_RELOC_LO16);
+ else if (imm_expr.X_add_number > -0x8000
&& imm_expr.X_add_number < 0)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu",
- "t,r,j", dreg, sreg, BFD_RELOC_LO16);
+ "t,r,j", op[0], op[1], BFD_RELOC_LO16);
}
else if (CPU_HAS_SEQ (mips_opts.arch))
{
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "seq", "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, "seq", "d,v,t", op[0], op[1], AT);
break;
}
else
{
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], AT);
used_at = 1;
}
- macro_build (&expr1, "sltiu", "t,r,j", dreg, dreg, BFD_RELOC_LO16);
+ macro_build (&expr1, "sltiu", "t,r,j", op[0], op[0], BFD_RELOC_LO16);
break;
- case M_SGE: /* sreg >= treg <==> not (sreg < treg) */
+ case M_SGE: /* X >= Y <==> not (X < Y) */
s = "slt";
goto sge;
case M_SGEU:
s = "sltu";
sge:
- macro_build (NULL, s, "d,v,t", dreg, sreg, treg);
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
+ macro_build (NULL, s, "d,v,t", op[0], op[1], op[2]);
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
break;
- case M_SGE_I: /* sreg >= I <==> not (sreg < I) */
+ case M_SGE_I: /* X >= I <==> not (X < I) */
case M_SGEU_I:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
+ if (imm_expr.X_add_number >= -0x8000
&& imm_expr.X_add_number < 0x8000)
- {
- macro_build (&imm_expr, mask == M_SGE_I ? "slti" : "sltiu", "t,r,j",
- dreg, sreg, BFD_RELOC_LO16);
- }
+ macro_build (&imm_expr, mask == M_SGE_I ? "slti" : "sltiu", "t,r,j",
+ op[0], op[1], BFD_RELOC_LO16);
else
{
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
macro_build (NULL, mask == M_SGE_I ? "slt" : "sltu", "d,v,t",
- dreg, sreg, AT);
+ op[0], op[1], AT);
used_at = 1;
}
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
break;
- case M_SGT: /* sreg > treg <==> treg < sreg */
+ case M_SGT: /* X > Y <==> Y < X */
s = "slt";
goto sgt;
case M_SGTU:
s = "sltu";
sgt:
- macro_build (NULL, s, "d,v,t", dreg, treg, sreg);
+ macro_build (NULL, s, "d,v,t", op[0], op[2], op[1]);
break;
- case M_SGT_I: /* sreg > I <==> I < sreg */
+ case M_SGT_I: /* X > I <==> I < X */
s = "slt";
goto sgti;
case M_SGTU_I:
sgti:
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s, "d,v,t", dreg, AT, sreg);
+ macro_build (NULL, s, "d,v,t", op[0], AT, op[1]);
break;
- case M_SLE: /* sreg <= treg <==> treg >= sreg <==> not (treg < sreg) */
+ case M_SLE: /* X <= Y <==> Y >= X <==> not (Y < X) */
s = "slt";
goto sle;
case M_SLEU:
s = "sltu";
sle:
- macro_build (NULL, s, "d,v,t", dreg, treg, sreg);
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
+ macro_build (NULL, s, "d,v,t", op[0], op[2], op[1]);
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
break;
- case M_SLE_I: /* sreg <= I <==> I >= sreg <==> not (I < sreg) */
+ case M_SLE_I: /* X <= I <==> I >= X <==> not (I < X) */
s = "slt";
goto slei;
case M_SLEU_I:
slei:
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s, "d,v,t", dreg, AT, sreg);
- macro_build (&expr1, "xori", "t,r,i", dreg, dreg, BFD_RELOC_LO16);
+ macro_build (NULL, s, "d,v,t", op[0], AT, op[1]);
+ macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16);
break;
case M_SLT_I:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
+ if (imm_expr.X_add_number >= -0x8000
&& imm_expr.X_add_number < 0x8000)
{
- macro_build (&imm_expr, "slti", "t,r,j", dreg, sreg, BFD_RELOC_LO16);
+ macro_build (&imm_expr, "slti", "t,r,j", op[0], op[1],
+ BFD_RELOC_LO16);
break;
}
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "slt", "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, "slt", "d,v,t", op[0], op[1], AT);
break;
case M_SLTU_I:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= -0x8000
+ if (imm_expr.X_add_number >= -0x8000
&& imm_expr.X_add_number < 0x8000)
{
- macro_build (&imm_expr, "sltiu", "t,r,j", dreg, sreg,
+ macro_build (&imm_expr, "sltiu", "t,r,j", op[0], op[1],
BFD_RELOC_LO16);
break;
}
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "sltu", "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, "sltu", "d,v,t", op[0], op[1], AT);
break;
case M_SNE:
- if (sreg == 0)
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, treg);
- else if (treg == 0)
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, sreg);
+ if (op[1] == 0)
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[2]);
+ else if (op[2] == 0)
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[1]);
else
{
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, treg);
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, dreg);
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], op[2]);
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[0]);
}
break;
case M_SNE_I:
- if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
+ if (imm_expr.X_add_number == 0)
{
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, sreg);
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[1]);
break;
}
- if (sreg == 0)
+ if (op[1] == 0)
{
- as_warn (_("Instruction %s: result is always true"),
+ as_warn (_("instruction %s: result is always true"),
ip->insn_mo->name);
macro_build (&expr1, HAVE_32BIT_GPRS ? "addiu" : "daddiu", "t,r,j",
- dreg, 0, BFD_RELOC_LO16);
+ op[0], 0, BFD_RELOC_LO16);
break;
}
if (CPU_HAS_SEQ (mips_opts.arch)
&& -512 <= imm_expr.X_add_number
&& imm_expr.X_add_number < 512)
{
- macro_build (NULL, "snei", "t,r,+Q", dreg, sreg,
+ macro_build (NULL, "snei", "t,r,+Q", op[0], op[1],
(int) imm_expr.X_add_number);
break;
}
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number >= 0
+ if (imm_expr.X_add_number >= 0
&& imm_expr.X_add_number < 0x10000)
{
- macro_build (&imm_expr, "xori", "t,r,i", dreg, sreg, BFD_RELOC_LO16);
+ macro_build (&imm_expr, "xori", "t,r,i", op[0], op[1],
+ BFD_RELOC_LO16);
}
- else if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x8000
+ else if (imm_expr.X_add_number > -0x8000
&& imm_expr.X_add_number < 0)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu",
- "t,r,j", dreg, sreg, BFD_RELOC_LO16);
+ "t,r,j", op[0], op[1], BFD_RELOC_LO16);
}
else if (CPU_HAS_SEQ (mips_opts.arch))
{
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "sne", "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, "sne", "d,v,t", op[0], op[1], AT);
break;
}
else
{
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, "xor", "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, "xor", "d,v,t", op[0], op[1], AT);
used_at = 1;
}
- macro_build (NULL, "sltu", "d,v,t", dreg, 0, dreg);
+ macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[0]);
break;
case M_SUB_I:
s2 = "dsub";
if (!mips_opts.micromips)
goto do_subi;
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x200
+ if (imm_expr.X_add_number > -0x200
&& imm_expr.X_add_number <= 0x200)
{
- macro_build (NULL, s, "t,r,.", dreg, sreg, -imm_expr.X_add_number);
+ macro_build (NULL, s, "t,r,.", op[0], op[1],
+ (int) -imm_expr.X_add_number);
break;
}
goto do_subi_i;
s = "daddiu";
s2 = "dsubu";
do_subi:
- if (imm_expr.X_op == O_constant
- && imm_expr.X_add_number > -0x8000
+ if (imm_expr.X_add_number > -0x8000
&& imm_expr.X_add_number <= 0x8000)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, s, "t,r,j", dreg, sreg, BFD_RELOC_LO16);
+ macro_build (&imm_expr, s, "t,r,j", op[0], op[1], BFD_RELOC_LO16);
break;
}
do_subi_i:
used_at = 1;
load_register (AT, &imm_expr, dbl);
- macro_build (NULL, s2, "d,v,t", dreg, sreg, AT);
+ macro_build (NULL, s2, "d,v,t", op[0], op[1], AT);
break;
case M_TEQ_I:
trap:
used_at = 1;
load_register (AT, &imm_expr, HAVE_64BIT_GPRS);
- macro_build (NULL, s, "s,t", sreg, AT);
+ macro_build (NULL, s, "s,t", op[0], AT);
break;
case M_TRUNCWS:
gas_assert (!mips_opts.micromips);
gas_assert (mips_opts.isa == ISA_MIPS1);
used_at = 1;
- sreg = (ip->insn_opcode >> 11) & 0x1f; /* floating reg */
- dreg = (ip->insn_opcode >> 06) & 0x1f; /* floating reg */
/*
* Is the double cfc1 instruction a bug in the mips assembler;
* or is there a reason for it?
*/
start_noreorder ();
- macro_build (NULL, "cfc1", "t,G", treg, RA);
- macro_build (NULL, "cfc1", "t,G", treg, RA);
+ macro_build (NULL, "cfc1", "t,G", op[2], RA);
+ macro_build (NULL, "cfc1", "t,G", op[2], RA);
macro_build (NULL, "nop", "");
expr1.X_add_number = 3;
- macro_build (&expr1, "ori", "t,r,i", AT, treg, BFD_RELOC_LO16);
+ macro_build (&expr1, "ori", "t,r,i", AT, op[2], BFD_RELOC_LO16);
expr1.X_add_number = 2;
macro_build (&expr1, "xori", "t,r,i", AT, AT, BFD_RELOC_LO16);
macro_build (NULL, "ctc1", "t,G", AT, RA);
macro_build (NULL, "nop", "");
macro_build (NULL, mask == M_TRUNCWD ? "cvt.w.d" : "cvt.w.s", "D,S",
- dreg, sreg);
- macro_build (NULL, "ctc1", "t,G", treg, RA);
+ op[0], op[1]);
+ macro_build (NULL, "ctc1", "t,G", op[2], RA);
macro_build (NULL, "nop", "");
end_noreorder ();
break;
ust = 1;
uld_st:
+ breg = op[2];
large_offset = !small_offset_p (off, align, offbits);
ep = &offset_expr;
expr1.X_add_number = 0;
offset_reloc[1] = BFD_RELOC_UNUSED;
offset_reloc[2] = BFD_RELOC_UNUSED;
breg = tempreg;
- tempreg = treg;
+ tempreg = op[0];
ep = &expr1;
}
- else if (!ust && treg == breg)
+ else if (!ust && op[0] == breg)
{
used_at = 1;
tempreg = AT;
}
else
- tempreg = treg;
+ tempreg = op[0];
if (off == 1)
goto ulh_sh;
offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
/* If necessary, move the result in tempreg to the final destination. */
- if (!ust && treg != tempreg)
+ if (!ust && op[0] != tempreg)
{
/* Protect second load's delay slot. */
load_delay_nop ();
- move_register (treg, tempreg);
+ move_register (op[0], tempreg);
}
break;
used_at = 1;
if (target_big_endian == ust)
ep->X_add_number += off;
- tempreg = ust || large_offset ? treg : AT;
+ tempreg = ust || large_offset ? op[0] : AT;
macro_build (ep, s, "t,o(b)", tempreg, -1,
offset_reloc[0], offset_reloc[1], offset_reloc[2], breg);
bytes. Unfortunately for M_USH_A we have none available before
the next store as AT holds the base address. We deal with this
case by clobbering TREG and then restoring it as with ULH. */
- tempreg = ust == large_offset ? treg : AT;
+ tempreg = ust == large_offset ? op[0] : AT;
if (ust)
- macro_build (NULL, "srl", SHFT_FMT, tempreg, treg, 8);
+ macro_build (NULL, "srl", SHFT_FMT, tempreg, op[0], 8);
if (target_big_endian == ust)
ep->X_add_number -= off;
/* For ULH and M_USH_A OR the LSB in. */
if (!ust || large_offset)
{
- tempreg = !large_offset ? AT : treg;
+ tempreg = !large_offset ? AT : op[0];
macro_build (NULL, "sll", SHFT_FMT, tempreg, tempreg, 8);
- macro_build (NULL, "or", "d,v,t", treg, treg, AT);
+ macro_build (NULL, "or", "d,v,t", op[0], op[0], AT);
}
break;
default:
/* FIXME: Check if this is one of the itbl macros, since they
are added dynamically. */
- as_bad (_("Macro %s not implemented yet"), ip->insn_mo->name);
+ as_bad (_("macro %s not implemented yet"), ip->insn_mo->name);
break;
}
if (!mips_opts.at && used_at)
- as_bad (_("Macro used $at after \".set noat\""));
+ as_bad (_("macro used $at after \".set noat\""));
}
/* Implement macros in mips16 mode. */
static void
mips16_macro (struct mips_cl_insn *ip)
{
+ const struct mips_operand_array *operands;
int mask;
- int xreg, yreg, zreg, tmp;
+ int tmp;
expressionS expr1;
int dbl;
const char *s, *s2, *s3;
+ unsigned int op[MAX_OPERANDS];
+ unsigned int i;
mask = ip->insn_mo->mask;
- xreg = MIPS16_EXTRACT_OPERAND (RX, *ip);
- yreg = MIPS16_EXTRACT_OPERAND (RY, *ip);
- zreg = MIPS16_EXTRACT_OPERAND (RZ, *ip);
+ operands = insn_operands (ip);
+ for (i = 0; i < MAX_OPERANDS; i++)
+ if (operands->operand[i])
+ op[i] = insn_extract_operand (ip, operands->operand[i]);
+ else
+ op[i] = -1;
expr1.X_op = O_constant;
expr1.X_op_symbol = NULL;
s = "mfhi";
do_div3:
start_noreorder ();
- macro_build (NULL, dbl ? "ddiv" : "div", "0,x,y", xreg, yreg);
+ macro_build (NULL, dbl ? "ddiv" : "div", "0,x,y", op[1], op[2]);
expr1.X_add_number = 2;
- macro_build (&expr1, "bnez", "x,p", yreg);
+ macro_build (&expr1, "bnez", "x,p", op[2]);
macro_build (NULL, "break", "6", 7);
/* FIXME: The normal code checks for of -1 / -0x80000000 here,
but I don't see how to do the comparisons without a temporary
register. */
end_noreorder ();
- macro_build (NULL, s, "x", zreg);
+ macro_build (NULL, s, "x", op[0]);
break;
case M_DIVU_3:
s2 = "mfhi";
do_divu3:
start_noreorder ();
- macro_build (NULL, s, "0,x,y", xreg, yreg);
+ macro_build (NULL, s, "0,x,y", op[1], op[2]);
expr1.X_add_number = 2;
- macro_build (&expr1, "bnez", "x,p", yreg);
+ macro_build (&expr1, "bnez", "x,p", op[2]);
macro_build (NULL, "break", "6", 7);
end_noreorder ();
- macro_build (NULL, s2, "x", zreg);
+ macro_build (NULL, s2, "x", op[0]);
break;
case M_DMUL:
dbl = 1;
case M_MUL:
- macro_build (NULL, dbl ? "dmultu" : "multu", "x,y", xreg, yreg);
- macro_build (NULL, "mflo", "x", zreg);
+ macro_build (NULL, dbl ? "dmultu" : "multu", "x,y", op[1], op[2]);
+ macro_build (NULL, "mflo", "x", op[0]);
break;
case M_DSUBU_I:
goto do_subu;
case M_SUBU_I:
do_subu:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "y,x,4", yreg, xreg);
+ macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "y,x,4", op[0], op[1]);
break;
case M_SUBU_I_2:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, "addiu", "x,k", xreg);
+ macro_build (&imm_expr, "addiu", "x,k", op[0]);
break;
case M_DSUBU_I_2:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, "daddiu", "y,j", yreg);
+ macro_build (&imm_expr, "daddiu", "y,j", op[0]);
break;
case M_BEQ:
s2 = "btnez";
do_reverse_branch:
- tmp = xreg;
- xreg = yreg;
- yreg = tmp;
+ tmp = op[1];
+ op[1] = op[0];
+ op[0] = tmp;
do_branch:
- macro_build (NULL, s, "x,y", xreg, yreg);
+ macro_build (NULL, s, "x,y", op[0], op[1]);
macro_build (&offset_expr, s2, "p");
break;
s3 = "x,8";
do_addone_branch_i:
- if (imm_expr.X_op != O_constant)
- as_bad (_("Unsupported large constant"));
++imm_expr.X_add_number;
do_branch_i:
- macro_build (&imm_expr, s, s3, xreg);
+ macro_build (&imm_expr, s, s3, op[0]);
macro_build (&offset_expr, s2, "p");
break;
case M_ABS:
expr1.X_add_number = 0;
- macro_build (&expr1, "slti", "x,8", yreg);
- if (xreg != yreg)
- move_register (xreg, yreg);
+ macro_build (&expr1, "slti", "x,8", op[1]);
+ if (op[0] != op[1])
+ macro_build (NULL, "move", "y,X", op[0], mips16_to_32_reg_map[op[1]]);
expr1.X_add_number = 2;
macro_build (&expr1, "bteqz", "p");
- macro_build (NULL, "neg", "x,w", xreg, xreg);
+ macro_build (NULL, "neg", "x,w", op[0], op[0]);
+ break;
}
}
-/* Assemble an instruction into its binary format. If the instruction
- is a macro, set imm_expr, imm2_expr and offset_expr to the values
- associated with "I", "+I" and "A" operands respectively. Otherwise
- store the value of the relocatable field (if any) in offset_expr.
- In both cases set offset_reloc to the relocation operators applied
- to offset_expr. */
+/* Look up instruction [START, START + LENGTH) in HASH. Record any extra
+ opcode bits in *OPCODE_EXTRA. */
-static void
-mips_ip (char *str, struct mips_cl_insn *ip)
+static struct mips_opcode *
+mips_lookup_insn (struct hash_control *hash, const char *start,
+ ssize_t length, unsigned int *opcode_extra)
{
- bfd_boolean wrong_delay_slot_insns = FALSE;
- bfd_boolean need_delay_slot_ok = TRUE;
- struct mips_opcode *firstinsn = NULL;
- const struct mips_opcode *past;
- struct hash_control *hash;
- char *s;
- const char *args;
- char c = 0;
+ char *name, *dot, *p;
+ unsigned int mask, suffix;
+ ssize_t opend;
struct mips_opcode *insn;
- char *argsStart;
- long opend;
- char *name;
- char *dot;
- long end;
- const struct mips_operand *operand;
- struct mips_arg_info arg;
-
- insn_error = NULL;
-
- if (mips_opts.micromips)
- {
- hash = micromips_op_hash;
- past = µmips_opcodes[bfd_micromips_num_opcodes];
- }
- else
- {
- hash = op_hash;
- past = &mips_opcodes[NUMOPCODES];
- }
- forced_insn_length = 0;
- insn = NULL;
-
- /* We first try to match an instruction up to a space or to the end. */
- for (end = 0; str[end] != '\0' && !ISSPACE (str[end]); end++)
- continue;
/* Make a copy of the instruction so that we can fiddle with it. */
- name = alloca (end + 1);
- memcpy (name, str, end);
- name[end] = '\0';
-
- for (;;)
- {
- insn = (struct mips_opcode *) hash_find (hash, name);
-
- if (insn != NULL || !mips_opts.micromips)
- break;
- if (forced_insn_length)
- break;
+ name = alloca (length + 1);
+ memcpy (name, start, length);
+ name[length] = '\0';
- /* See if there's an instruction size override suffix,
- either `16' or `32', at the end of the mnemonic proper,
- that defines the operation, i.e. before the first `.'
- character if any. Strip it and retry. */
- dot = strchr (name, '.');
- opend = dot != NULL ? dot - name : end;
- if (opend < 3)
- break;
- if (name[opend - 2] == '1' && name[opend - 1] == '6')
- forced_insn_length = 2;
- else if (name[opend - 2] == '3' && name[opend - 1] == '2')
- forced_insn_length = 4;
- else
- break;
- memcpy (name + opend - 2, name + opend, end - opend + 1);
- }
- if (insn == NULL)
- {
- insn_error = _("Unrecognized opcode");
- return;
- }
+ /* Look up the instruction as-is. */
+ insn = (struct mips_opcode *) hash_find (hash, name);
+ if (insn)
+ return insn;
- /* For microMIPS instructions placed in a fixed-length branch delay slot
- we make up to two passes over the relevant fragment of the opcode
- table. First we try instructions that meet the delay slot's length
- requirement. If none matched, then we retry with the remaining ones
- and if one matches, then we use it and then issue an appropriate
- warning later on. */
- argsStart = s = str + end;
- for (;;)
+ dot = strchr (name, '.');
+ if (dot && dot[1])
{
- bfd_boolean delay_slot_ok;
- bfd_boolean size_ok;
- bfd_boolean ok;
- bfd_boolean more_alts;
-
- gas_assert (strcmp (insn->name, name) == 0);
-
- ok = is_opcode_valid (insn);
- size_ok = is_size_valid (insn);
- delay_slot_ok = is_delay_slot_valid (insn);
- if (!delay_slot_ok && !wrong_delay_slot_insns)
+ /* Try to interpret the text after the dot as a VU0 channel suffix. */
+ p = mips_parse_vu0_channels (dot + 1, &mask);
+ if (*p == 0 && mask != 0)
{
- firstinsn = insn;
- wrong_delay_slot_insns = TRUE;
- }
- more_alts = (insn + 1 < past
- && strcmp (insn[0].name, insn[1].name) == 0);
- if (!ok || !size_ok || delay_slot_ok != need_delay_slot_ok)
- {
- static char buf[256];
-
- if (more_alts)
- {
- ++insn;
- continue;
- }
- if (wrong_delay_slot_insns && need_delay_slot_ok)
+ *dot = 0;
+ insn = (struct mips_opcode *) hash_find (hash, name);
+ *dot = '.';
+ if (insn && (insn->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) != 0)
{
- gas_assert (firstinsn);
- need_delay_slot_ok = FALSE;
- past = insn + 1;
- insn = firstinsn;
- continue;
+ *opcode_extra |= mask << mips_vu0_channel_mask.lsb;
+ return insn;
}
-
- if (insn_error)
- return;
-
- if (!ok)
- sprintf (buf, _("Opcode not supported on this processor: %s (%s)"),
- mips_cpu_info_from_arch (mips_opts.arch)->name,
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- else if (mips_opts.insn32)
- sprintf (buf, _("Opcode not supported in the `insn32' mode"));
- else
- sprintf (buf, _("Unrecognized %u-bit version of microMIPS opcode"),
- 8 * forced_insn_length);
- insn_error = buf;
-
- return;
}
+ }
- imm_expr.X_op = O_absent;
- imm2_expr.X_op = O_absent;
- offset_expr.X_op = O_absent;
- offset_reloc[0] = BFD_RELOC_UNUSED;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
-
- create_insn (ip, insn);
- insn_error = NULL;
- memset (&arg, 0, sizeof (arg));
- arg.insn = ip;
- arg.argnum = 1;
- arg.last_regno = ILLEGAL_REG;
- arg.dest_regno = ILLEGAL_REG;
- arg.soft_match = (more_alts
- || (wrong_delay_slot_insns && need_delay_slot_ok));
- for (args = insn->args;; ++args)
+ if (mips_opts.micromips)
+ {
+ /* See if there's an instruction size override suffix,
+ either `16' or `32', at the end of the mnemonic proper,
+ that defines the operation, i.e. before the first `.'
+ character if any. Strip it and retry. */
+ opend = dot != NULL ? dot - name : length;
+ if (opend >= 3 && name[opend - 2] == '1' && name[opend - 1] == '6')
+ suffix = 2;
+ else if (name[opend - 2] == '3' && name[opend - 1] == '2')
+ suffix = 4;
+ else
+ suffix = 0;
+ if (suffix)
{
- SKIP_SPACE_TABS (s);
- if (*s == 0)
- {
- /* Handle unary instructions in which only one operand is given.
- The source is then the same as the destination. */
- if (arg.opnum == 1 && *args == ',')
- switch (args[1])
- {
- case 'r':
- case 'v':
- case 'w':
- case 'W':
- case 'V':
- arg.argnum = 1;
- s = argsStart;
- continue;
- }
-
- /* Treat elided base registers as $0. */
- if (strcmp (args, "(b)") == 0)
- args += 3;
-
- /* Fail the match if there were too few operands. */
- if (*args)
- break;
-
- /* Successful match. */
- if (arg.dest_regno == arg.last_regno
- && strncmp (ip->insn_mo->name, "jalr", 4) == 0)
- {
- if (arg.opnum == 2)
- as_bad (_("Source and destination must be different"));
- else if (arg.last_regno == 31)
- as_bad (_("A destination register must be supplied"));
- }
- check_completed_insn (&arg);
- return;
- }
-
- /* Fail the match if the line has too many operands. */
- if (*args == 0)
- break;
-
- /* Handle characters that need to match exactly. */
- if (*args == '(' || *args == ')' || *args == ',')
+ memcpy (name + opend - 2, name + opend, length - opend + 1);
+ insn = (struct mips_opcode *) hash_find (hash, name);
+ if (insn)
{
- if (*s != *args)
- break;
- if (*s == ',')
- arg.argnum += 1;
- ++s;
- continue;
+ forced_insn_length = suffix;
+ return insn;
}
+ }
+ }
- /* Handle special macro operands. Work out the properties of
- other operands. */
- arg.opnum += 1;
- arg.optional_reg = FALSE;
- arg.lax_max = FALSE;
- switch (*args)
- {
- case '+':
- switch (args[1])
- {
- case '1':
- case '2':
- case '3':
- case '4':
- case 'B':
- case 'C':
- case 'F':
- case 'G':
- case 'H':
- case 'J':
- case 'Q':
- case 'S':
- case 's':
- /* If these integer forms come last, there is no other
- form of the instruction that could match. Prefer to
- give detailed error messages where possible. */
- if (args[2] == 0)
- arg.soft_match = FALSE;
- break;
-
- case 'I':
- /* "+I" is like "I", except that imm2_expr is used. */
- my_getExpression (&imm2_expr, s);
- if (imm2_expr.X_op != O_big
- && imm2_expr.X_op != O_constant)
- insn_error = _("absolute expression required");
- if (HAVE_32BIT_GPRS)
- normalize_constant_expr (&imm2_expr);
- s = expr_end;
- ++args;
- continue;
-
- case 'i':
- *offset_reloc = BFD_RELOC_MIPS_JMP;
- break;
- }
- break;
-
- case '\'':
- case ':':
- case '@':
- case '^':
- case '$':
- case '\\':
- case '%':
- case '|':
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '8':
- case 'B':
- case 'C':
- case 'J':
- case 'O':
- case 'P':
- case 'Q':
- case 'c':
- case 'h':
- case 'q':
- /* If these integer forms come last, there is no other
- form of the instruction that could match. Prefer to
- give detailed error messages where possible. */
- if (args[1] == 0)
- arg.soft_match = FALSE;
- break;
-
- case 'r':
- case 'v':
- case 'w':
- case 'W':
- case 'V':
- /* We have already matched a comma by this point, so the register
- is only optional if there is another operand to come. */
- gas_assert (arg.opnum == 2);
- arg.optional_reg = (args[1] == ',');
- break;
-
- case 'I':
- my_getExpression (&imm_expr, s);
- if (imm_expr.X_op != O_big
- && imm_expr.X_op != O_constant)
- insn_error = _("absolute expression required");
- if (HAVE_32BIT_GPRS)
- normalize_constant_expr (&imm_expr);
- s = expr_end;
- continue;
-
- case 'A':
- my_getSmallExpression (&offset_expr, offset_reloc, s);
- if (offset_expr.X_op == O_register)
- {
- /* Assume that the offset has been elided and that what
- we saw was a base register. The match will fail later
- if that assumption turns out to be wrong. */
- offset_expr.X_op = O_constant;
- offset_expr.X_add_number = 0;
- }
- else
- {
- normalize_address_expr (&offset_expr);
- s = expr_end;
- }
- continue;
-
- case 'F':
- case 'L':
- case 'f':
- case 'l':
- {
- int f64;
- int using_gprs;
- char *save_in;
- char *err;
- unsigned char temp[8];
- int len;
- unsigned int length;
- segT seg;
- subsegT subseg;
- char *p;
-
- /* These only appear as the last operand in an
- instruction, and every instruction that accepts
- them in any variant accepts them in all variants.
- This means we don't have to worry about backing out
- any changes if the instruction does not match.
-
- The difference between them is the size of the
- floating point constant and where it goes. For 'F'
- and 'L' the constant is 64 bits; for 'f' and 'l' it
- is 32 bits. Where the constant is placed is based
- on how the MIPS assembler does things:
- F -- .rdata
- L -- .lit8
- f -- immediate value
- l -- .lit4
-
- The .lit4 and .lit8 sections are only used if
- permitted by the -G argument.
-
- The code below needs to know whether the target register
- is 32 or 64 bits wide. It relies on the fact 'f' and
- 'F' are used with GPR-based instructions and 'l' and
- 'L' are used with FPR-based instructions. */
-
- f64 = *args == 'F' || *args == 'L';
- using_gprs = *args == 'F' || *args == 'f';
-
- save_in = input_line_pointer;
- input_line_pointer = s;
- err = md_atof (f64 ? 'd' : 'f', (char *) temp, &len);
- length = len;
- s = input_line_pointer;
- input_line_pointer = save_in;
- if (err != NULL && *err != '\0')
- {
- as_bad (_("Bad floating point constant: %s"), err);
- memset (temp, '\0', sizeof temp);
- length = f64 ? 8 : 4;
- }
-
- gas_assert (length == (unsigned) (f64 ? 8 : 4));
-
- if (*args == 'f'
- || (*args == 'l'
- && (g_switch_value < 4
- || (temp[0] == 0 && temp[1] == 0)
- || (temp[2] == 0 && temp[3] == 0))))
- {
- imm_expr.X_op = O_constant;
- if (!target_big_endian)
- imm_expr.X_add_number = bfd_getl32 (temp);
- else
- imm_expr.X_add_number = bfd_getb32 (temp);
- }
- else if (length > 4
- && !mips_disable_float_construction
- /* Constants can only be constructed in GPRs and
- copied to FPRs if the GPRs are at least as wide
- as the FPRs. Force the constant into memory if
- we are using 64-bit FPRs but the GPRs are only
- 32 bits wide. */
- && (using_gprs
- || !(HAVE_64BIT_FPRS && HAVE_32BIT_GPRS))
- && ((temp[0] == 0 && temp[1] == 0)
- || (temp[2] == 0 && temp[3] == 0))
- && ((temp[4] == 0 && temp[5] == 0)
- || (temp[6] == 0 && temp[7] == 0)))
- {
- /* The value is simple enough to load with a couple of
- instructions. If using 32-bit registers, set
- imm_expr to the high order 32 bits and offset_expr to
- the low order 32 bits. Otherwise, set imm_expr to
- the entire 64 bit constant. */
- if (using_gprs ? HAVE_32BIT_GPRS : HAVE_32BIT_FPRS)
- {
- imm_expr.X_op = O_constant;
- offset_expr.X_op = O_constant;
- if (!target_big_endian)
- {
- imm_expr.X_add_number = bfd_getl32 (temp + 4);
- offset_expr.X_add_number = bfd_getl32 (temp);
- }
- else
- {
- imm_expr.X_add_number = bfd_getb32 (temp);
- offset_expr.X_add_number = bfd_getb32 (temp + 4);
- }
- if (offset_expr.X_add_number == 0)
- offset_expr.X_op = O_absent;
- }
- else
- {
- imm_expr.X_op = O_constant;
- if (!target_big_endian)
- imm_expr.X_add_number = bfd_getl64 (temp);
- else
- imm_expr.X_add_number = bfd_getb64 (temp);
- }
- }
- else
- {
- const char *newname;
- segT new_seg;
-
- /* Switch to the right section. */
- seg = now_seg;
- subseg = now_subseg;
- switch (*args)
- {
- default: /* unused default case avoids warnings. */
- case 'L':
- newname = RDATA_SECTION_NAME;
- if (g_switch_value >= 8)
- newname = ".lit8";
- break;
- case 'F':
- newname = RDATA_SECTION_NAME;
- break;
- case 'l':
- gas_assert (g_switch_value >= 4);
- newname = ".lit4";
- break;
- }
- new_seg = subseg_new (newname, (subsegT) 0);
- bfd_set_section_flags (stdoutput, new_seg,
- (SEC_ALLOC
- | SEC_LOAD
- | SEC_READONLY
- | SEC_DATA));
- frag_align (*args == 'l' ? 2 : 3, 0, 0);
- if (strncmp (TARGET_OS, "elf", 3) != 0)
- record_alignment (new_seg, 4);
- else
- record_alignment (new_seg, *args == 'l' ? 2 : 3);
- if (seg == now_seg)
- as_bad (_("Can't use floating point insn in this section"));
-
- /* Set the argument to the current address in the
- section. */
- offset_expr.X_op = O_symbol;
- offset_expr.X_add_symbol = symbol_temp_new_now ();
- offset_expr.X_add_number = 0;
-
- /* Put the floating point number into the section. */
- p = frag_more ((int) length);
- memcpy (p, temp, length);
-
- /* Switch back to the original section. */
- subseg_set (seg, subseg);
- }
- }
- continue;
-
- /* ??? This is the traditional behavior, but is flaky if
- there are alternative versions of the same instruction
- for different subarchitectures. The next alternative
- might not be suitable. */
- case 'j':
- /* For compatibility with older assemblers, we accept
- 0x8000-0xffff as signed 16-bit numbers when only
- signed numbers are allowed. */
- arg.lax_max = !more_alts;
- case 'i':
- /* Only accept non-constant operands if this is the
- final alternative. Later alternatives might include
- a macro implementation. */
- arg.allow_nonconst = !more_alts;
- break;
-
- case 'u':
- /* There are no macro implementations for out-of-range values. */
- arg.allow_nonconst = TRUE;
- break;
-
- case 'o':
- /* There should always be a macro implementation. */
- arg.allow_nonconst = FALSE;
- break;
+ return NULL;
+}
- case 'p':
- *offset_reloc = BFD_RELOC_16_PCREL_S2;
- break;
+/* Assemble an instruction into its binary format. If the instruction
+ is a macro, set imm_expr and offset_expr to the values associated
+ with "I" and "A" operands respectively. Otherwise store the value
+ of the relocatable field (if any) in offset_expr. In both cases
+ set offset_reloc to the relocation operators applied to offset_expr. */
- case 'a':
- *offset_reloc = BFD_RELOC_MIPS_JMP;
- break;
+static void
+mips_ip (char *str, struct mips_cl_insn *insn)
+{
+ const struct mips_opcode *first, *past;
+ struct hash_control *hash;
+ char format;
+ size_t end;
+ struct mips_operand_token *tokens;
+ unsigned int opcode_extra;
- case 'm':
- gas_assert (mips_opts.micromips);
- c = args[1];
- switch (c)
- {
- case 't':
- case 'c':
- case 'e':
- /* We have already matched a comma by this point,
- so the register is only optional if there is another
- operand to come. */
- gas_assert (arg.opnum == 2);
- arg.optional_reg = (args[2] == ',');
- break;
+ if (mips_opts.micromips)
+ {
+ hash = micromips_op_hash;
+ past = µmips_opcodes[bfd_micromips_num_opcodes];
+ }
+ else
+ {
+ hash = op_hash;
+ past = &mips_opcodes[NUMOPCODES];
+ }
+ forced_insn_length = 0;
+ opcode_extra = 0;
- case 'D':
- case 'E':
- if (!forced_insn_length)
- *offset_reloc = (int) BFD_RELOC_UNUSED + c;
- else if (c == 'D')
- *offset_reloc = BFD_RELOC_MICROMIPS_10_PCREL_S1;
- else
- *offset_reloc = BFD_RELOC_MICROMIPS_7_PCREL_S1;
- break;
- }
- break;
- }
+ /* We first try to match an instruction up to a space or to the end. */
+ for (end = 0; str[end] != '\0' && !ISSPACE (str[end]); end++)
+ continue;
- operand = (mips_opts.micromips
- ? decode_micromips_operand (args)
- : decode_mips_operand (args));
- if (!operand)
- abort ();
+ first = mips_lookup_insn (hash, str, end, &opcode_extra);
+ if (first == NULL)
+ {
+ set_insn_error (0, _("unrecognized opcode"));
+ return;
+ }
- s = match_operand (&arg, operand, s);
- if (!s && arg.optional_reg)
- {
- /* Assume that the register has been elided and is the
- same as the first operand. */
- arg.optional_reg = FALSE;
- arg.argnum = 1;
- s = argsStart;
- SKIP_SPACE_TABS (s);
- s = match_operand (&arg, operand, s);
- }
- if (!s)
- break;
+ if (strcmp (first->name, "li.s") == 0)
+ format = 'f';
+ else if (strcmp (first->name, "li.d") == 0)
+ format = 'd';
+ else
+ format = 0;
+ tokens = mips_parse_arguments (str + end, format);
+ if (!tokens)
+ return;
- /* Skip prefixes. */
- if (*args == '+' || *args == 'm')
- args++;
+ if (!match_insns (insn, first, past, tokens, opcode_extra, FALSE)
+ && !match_insns (insn, first, past, tokens, opcode_extra, TRUE))
+ set_insn_error (0, _("invalid operands"));
- continue;
- }
- /* Args don't match. */
- s = argsStart;
- insn_error = _("Illegal operands");
- if (more_alts)
- {
- ++insn;
- continue;
- }
- if (wrong_delay_slot_insns && need_delay_slot_ok)
- {
- gas_assert (firstinsn);
- need_delay_slot_ok = FALSE;
- past = insn + 1;
- insn = firstinsn;
- continue;
- }
- return;
- }
+ obstack_free (&mips_operand_tokens, tokens);
}
/* As for mips_ip, but used when assembling MIPS16 code.
bytes if the user explicitly requested a small or extended instruction. */
static void
-mips16_ip (char *str, struct mips_cl_insn *ip)
+mips16_ip (char *str, struct mips_cl_insn *insn)
{
- char *s;
- const char *args;
- struct mips_opcode *insn;
- char *argsstart;
- unsigned int regno;
- unsigned int lastregno = 0;
- char *s_reset;
- size_t i;
-
- insn_error = NULL;
+ char *end, *s, c;
+ struct mips_opcode *first;
+ struct mips_operand_token *tokens;
forced_insn_length = 0;
for (s = str; ISLOWER (*s); ++s)
;
- switch (*s)
+ end = s;
+ c = *end;
+ switch (c)
{
case '\0':
break;
case ' ':
- *s++ = '\0';
+ s++;
break;
case '.':
if (s[1] == 't' && s[2] == ' ')
{
- *s = '\0';
forced_insn_length = 2;
s += 3;
break;
}
else if (s[1] == 'e' && s[2] == ' ')
{
- *s = '\0';
forced_insn_length = 4;
s += 3;
break;
}
/* Fall through. */
default:
- insn_error = _("unknown opcode");
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
if (mips_opts.noautoextend && !forced_insn_length)
forced_insn_length = 2;
- if ((insn = (struct mips_opcode *) hash_find (mips16_op_hash, str)) == NULL)
- {
- insn_error = _("unrecognized opcode");
- return;
- }
+ *end = 0;
+ first = (struct mips_opcode *) hash_find (mips16_op_hash, str);
+ *end = c;
- argsstart = s;
- for (;;)
+ if (!first)
{
- bfd_boolean ok;
- char relax_char;
-
- gas_assert (strcmp (insn->name, str) == 0);
-
- ok = is_opcode_valid_16 (insn);
- if (! ok)
- {
- if (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes]
- && strcmp (insn->name, insn[1].name) == 0)
- {
- ++insn;
- continue;
- }
- else
- {
- if (!insn_error)
- {
- static char buf[100];
- sprintf (buf,
- _("Opcode not supported on this processor: %s (%s)"),
- mips_cpu_info_from_arch (mips_opts.arch)->name,
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- insn_error = buf;
- }
- return;
- }
- }
-
- create_insn (ip, insn);
- imm_expr.X_op = O_absent;
- imm2_expr.X_op = O_absent;
- offset_expr.X_op = O_absent;
- offset_reloc[0] = BFD_RELOC_UNUSED;
- offset_reloc[1] = BFD_RELOC_UNUSED;
- offset_reloc[2] = BFD_RELOC_UNUSED;
- relax_char = 0;
- for (args = insn->args; 1; ++args)
- {
- int c;
-
- if (*s == ' ')
- ++s;
-
- /* In this switch statement we call break if we did not find
- a match, continue if we did find a match, or return if we
- are done. */
-
- c = *args;
- switch (c)
- {
- case '\0':
- if (*s == '\0')
- {
- offsetT value;
-
- /* Stuff the immediate value in now, if we can. */
- if (insn->pinfo == INSN_MACRO)
- {
- gas_assert (relax_char == 0);
- gas_assert (*offset_reloc == BFD_RELOC_UNUSED);
- }
- else if (relax_char
- && offset_expr.X_op == O_constant
- && calculate_reloc (*offset_reloc,
- offset_expr.X_add_number,
- &value))
- {
- mips16_immed (NULL, 0, relax_char, *offset_reloc, value,
- forced_insn_length, &ip->insn_opcode);
- offset_expr.X_op = O_absent;
- *offset_reloc = BFD_RELOC_UNUSED;
- }
- else if (relax_char && *offset_reloc != BFD_RELOC_UNUSED)
- {
- if (forced_insn_length == 2)
- as_bad (_("invalid unextended operand value"));
- forced_insn_length = 4;
- ip->insn_opcode |= MIPS16_EXTEND;
- }
- else if (relax_char)
- *offset_reloc = (int) BFD_RELOC_UNUSED + relax_char;
-
- return;
- }
- break;
-
- case ',':
- if (*s++ == c)
- continue;
- s--;
- switch (*++args)
- {
- case 'v':
- MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
- continue;
- case 'w':
- MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
- continue;
- }
- break;
-
- case '(':
- case ')':
- if (*s++ == c)
- continue;
- break;
-
- case 'v':
- case 'w':
- if (s[0] != '$')
- {
- if (c == 'v')
- MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
- else
- MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
- ++args;
- continue;
- }
- /* Fall through. */
- case 'x':
- case 'y':
- case 'z':
- case 'Z':
- case '0':
- case 'S':
- case 'R':
- case 'X':
- case 'Y':
- s_reset = s;
- if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no))
- {
- if (c == 'v' || c == 'w')
- {
- if (c == 'v')
- MIPS16_INSERT_OPERAND (RX, *ip, lastregno);
- else
- MIPS16_INSERT_OPERAND (RY, *ip, lastregno);
- ++args;
- continue;
- }
- break;
- }
-
- if (*s == ' ')
- ++s;
- if (args[1] != *s)
- {
- if (c == 'v' || c == 'w')
- {
- regno = mips16_to_32_reg_map[lastregno];
- s = s_reset;
- ++args;
- }
- }
-
- switch (c)
- {
- case 'x':
- case 'y':
- case 'z':
- case 'v':
- case 'w':
- case 'Z':
- regno = mips32_to_16_reg_map[regno];
- break;
-
- case '0':
- if (regno != 0)
- regno = ILLEGAL_REG;
- break;
-
- case 'S':
- if (regno != SP)
- regno = ILLEGAL_REG;
- break;
-
- case 'R':
- if (regno != RA)
- regno = ILLEGAL_REG;
- break;
-
- case 'X':
- case 'Y':
- if (regno == AT && mips_opts.at)
- {
- if (mips_opts.at == ATREG)
- as_warn (_("used $at without \".set noat\""));
- else
- as_warn (_("used $%u with \".set at=$%u\""),
- regno, mips_opts.at);
- }
- break;
-
- default:
- abort ();
- }
-
- if (regno == ILLEGAL_REG)
- break;
-
- switch (c)
- {
- case 'x':
- case 'v':
- MIPS16_INSERT_OPERAND (RX, *ip, regno);
- break;
- case 'y':
- case 'w':
- MIPS16_INSERT_OPERAND (RY, *ip, regno);
- break;
- case 'z':
- MIPS16_INSERT_OPERAND (RZ, *ip, regno);
- break;
- case 'Z':
- MIPS16_INSERT_OPERAND (MOVE32Z, *ip, regno);
- case '0':
- case 'S':
- case 'R':
- break;
- case 'X':
- MIPS16_INSERT_OPERAND (REGR32, *ip, regno);
- break;
- case 'Y':
- regno = ((regno & 7) << 2) | ((regno & 0x18) >> 3);
- MIPS16_INSERT_OPERAND (REG32R, *ip, regno);
- break;
- default:
- abort ();
- }
-
- lastregno = regno;
- continue;
-
- case 'P':
- if (strncmp (s, "$pc", 3) == 0)
- {
- s += 3;
- continue;
- }
- break;
-
- case '5':
- case 'H':
- case 'W':
- case 'D':
- case 'j':
- case 'V':
- case 'C':
- case 'U':
- case 'k':
- case 'K':
- i = my_getSmallExpression (&offset_expr, offset_reloc, s);
- if (i > 0)
- {
- relax_char = c;
- s = expr_end;
- continue;
- }
- *offset_reloc = BFD_RELOC_UNUSED;
- /* Fall through. */
- case '<':
- case '>':
- case '[':
- case ']':
- case '4':
- case '8':
- my_getExpression (&offset_expr, s);
- if (offset_expr.X_op == O_register)
- {
- /* What we thought was an expression turned out to
- be a register. */
-
- if (s[0] == '(' && args[1] == '(')
- {
- /* It looks like the expression was omitted
- before a register indirection, which means
- that the expression is implicitly zero. We
- still set up offset_expr, so that we handle
- explicit extensions correctly. */
- offset_expr.X_op = O_constant;
- offset_expr.X_add_number = 0;
- relax_char = c;
- continue;
- }
-
- break;
- }
-
- /* We need to relax this instruction. */
- relax_char = c;
- s = expr_end;
- continue;
-
- case 'p':
- case 'q':
- case 'A':
- case 'B':
- case 'E':
- /* We use offset_reloc rather than imm_reloc for the PC
- relative operands. This lets macros with both
- immediate and address operands work correctly. */
- my_getExpression (&offset_expr, s);
-
- if (offset_expr.X_op == O_register)
- break;
-
- /* We need to relax this instruction. */
- relax_char = c;
- s = expr_end;
- continue;
-
- case '6': /* break code */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 63)
- as_warn (_("Invalid value for `%s' (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- MIPS16_INSERT_OPERAND (IMM6, *ip, imm_expr.X_add_number);
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- case 'I':
- my_getExpression (&imm_expr, s);
- if (imm_expr.X_op != O_big
- && imm_expr.X_op != O_constant)
- insn_error = _("absolute expression required");
- if (HAVE_32BIT_GPRS)
- normalize_constant_expr (&imm_expr);
- s = expr_end;
- continue;
-
- case 'a': /* 26 bit address */
- case 'i':
- my_getExpression (&offset_expr, s);
- s = expr_end;
- *offset_reloc = BFD_RELOC_MIPS16_JMP;
- ip->insn_opcode <<= 16;
- continue;
-
- case 'l': /* register list for entry macro */
- case 'L': /* register list for exit macro */
- {
- int mask;
-
- if (c == 'l')
- mask = 0;
- else
- mask = 7 << 3;
- while (*s != '\0')
- {
- unsigned int freg, reg1, reg2;
-
- while (*s == ' ' || *s == ',')
- ++s;
- if (reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®1))
- freg = 0;
- else if (reg_lookup (&s, RTYPE_FPU, ®1))
- freg = 1;
- else
- {
- as_bad (_("can't parse register list"));
- break;
- }
- if (*s == ' ')
- ++s;
- if (*s != '-')
- reg2 = reg1;
- else
- {
- ++s;
- if (!reg_lookup (&s, freg ? RTYPE_FPU
- : (RTYPE_GP | RTYPE_NUM), ®2))
- {
- as_bad (_("invalid register list"));
- break;
- }
- }
- if (freg && reg1 == 0 && reg2 == 0 && c == 'L')
- {
- mask &= ~ (7 << 3);
- mask |= 5 << 3;
- }
- else if (freg && reg1 == 0 && reg2 == 1 && c == 'L')
- {
- mask &= ~ (7 << 3);
- mask |= 6 << 3;
- }
- else if (reg1 == 4 && reg2 >= 4 && reg2 <= 7 && c != 'L')
- mask |= (reg2 - 3) << 3;
- else if (reg1 == 16 && reg2 >= 16 && reg2 <= 17)
- mask |= (reg2 - 15) << 1;
- else if (reg1 == RA && reg2 == RA)
- mask |= 1;
- else
- {
- as_bad (_("invalid register list"));
- break;
- }
- }
- /* The mask is filled in in the opcode table for the
- benefit of the disassembler. We remove it before
- applying the actual mask. */
- ip->insn_opcode &= ~ ((7 << 3) << MIPS16OP_SH_IMM6);
- ip->insn_opcode |= mask << MIPS16OP_SH_IMM6;
- }
- continue;
-
- case 'm': /* Register list for save insn. */
- case 'M': /* Register list for restore insn. */
- {
- int opcode = ip->insn_opcode;
- int framesz = 0, seen_framesz = 0;
- int nargs = 0, statics = 0, sregs = 0;
-
- while (*s != '\0')
- {
- unsigned int reg1, reg2;
-
- SKIP_SPACE_TABS (s);
- while (*s == ',')
- ++s;
- SKIP_SPACE_TABS (s);
-
- my_getExpression (&imm_expr, s);
- if (imm_expr.X_op == O_constant)
- {
- /* Handle the frame size. */
- if (seen_framesz)
- {
- as_bad (_("more than one frame size in list"));
- break;
- }
- seen_framesz = 1;
- framesz = imm_expr.X_add_number;
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
- }
-
- if (! reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®1))
- {
- as_bad (_("can't parse register list"));
- break;
- }
-
- while (*s == ' ')
- ++s;
-
- if (*s != '-')
- reg2 = reg1;
- else
- {
- ++s;
- if (! reg_lookup (&s, RTYPE_GP | RTYPE_NUM, ®2)
- || reg2 < reg1)
- {
- as_bad (_("can't parse register list"));
- break;
- }
- }
-
- while (reg1 <= reg2)
- {
- if (reg1 >= 4 && reg1 <= 7)
- {
- if (!seen_framesz)
- /* args $a0-$a3 */
- nargs |= 1 << (reg1 - 4);
- else
- /* statics $a0-$a3 */
- statics |= 1 << (reg1 - 4);
- }
- else if ((reg1 >= 16 && reg1 <= 23) || reg1 == 30)
- {
- /* $s0-$s8 */
- sregs |= 1 << ((reg1 == 30) ? 8 : (reg1 - 16));
- }
- else if (reg1 == 31)
- {
- /* Add $ra to insn. */
- opcode |= 0x40;
- }
- else
- {
- as_bad (_("unexpected register in list"));
- break;
- }
- if (++reg1 == 24)
- reg1 = 30;
- }
- }
-
- /* Encode args/statics combination. */
- if (nargs & statics)
- as_bad (_("arg/static registers overlap"));
- else if (nargs == 0xf)
- /* All $a0-$a3 are args. */
- opcode |= MIPS16_ALL_ARGS << 16;
- else if (statics == 0xf)
- /* All $a0-$a3 are statics. */
- opcode |= MIPS16_ALL_STATICS << 16;
- else
- {
- int narg = 0, nstat = 0;
-
- /* Count arg registers. */
- while (nargs & 0x1)
- {
- nargs >>= 1;
- narg++;
- }
- if (nargs != 0)
- as_bad (_("invalid arg register list"));
-
- /* Count static registers. */
- while (statics & 0x8)
- {
- statics = (statics << 1) & 0xf;
- nstat++;
- }
- if (statics != 0)
- as_bad (_("invalid static register list"));
-
- /* Encode args/statics. */
- opcode |= ((narg << 2) | nstat) << 16;
- }
-
- /* Encode $s0/$s1. */
- if (sregs & (1 << 0)) /* $s0 */
- opcode |= 0x20;
- if (sregs & (1 << 1)) /* $s1 */
- opcode |= 0x10;
- sregs >>= 2;
-
- if (sregs != 0)
- {
- /* Count regs $s2-$s8. */
- int nsreg = 0;
- while (sregs & 1)
- {
- sregs >>= 1;
- nsreg++;
- }
- if (sregs != 0)
- as_bad (_("invalid static register list"));
- /* Encode $s2-$s8. */
- opcode |= nsreg << 24;
- }
-
- /* Encode frame size. */
- if (!seen_framesz)
- as_bad (_("missing frame size"));
- else if ((framesz & 7) != 0 || framesz < 0
- || framesz > 0xff * 8)
- as_bad (_("invalid frame size"));
- else if (framesz != 128 || (opcode >> 16) != 0)
- {
- framesz /= 8;
- opcode |= (((framesz & 0xf0) << 16)
- | (framesz & 0x0f));
- }
-
- /* Finally build the instruction. */
- if ((opcode >> 16) != 0 || framesz == 0)
- opcode |= MIPS16_EXTEND;
- ip->insn_opcode = opcode;
- }
- continue;
-
- case 'e': /* extend code */
- my_getExpression (&imm_expr, s);
- check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number > 0x7ff)
- {
- as_warn (_("Invalid value for `%s' (%lu)"),
- ip->insn_mo->name,
- (unsigned long) imm_expr.X_add_number);
- imm_expr.X_add_number &= 0x7ff;
- }
- ip->insn_opcode |= imm_expr.X_add_number;
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
-
- default:
- abort ();
- }
- break;
- }
-
- /* Args don't match. */
- if (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes] &&
- strcmp (insn->name, insn[1].name) == 0)
- {
- ++insn;
- s = argsstart;
- continue;
- }
-
- insn_error = _("illegal operands");
-
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
-}
-/* This structure holds information we know about a mips16 immediate
- argument type. */
-
-struct mips16_immed_operand
-{
- /* The type code used in the argument string in the opcode table. */
- int type;
- /* The number of bits in the short form of the opcode. */
- int nbits;
- /* The number of bits in the extended form of the opcode. */
- int extbits;
- /* The amount by which the short form is shifted when it is used;
- for example, the sw instruction has a shift count of 2. */
- int shift;
- /* The amount by which the short form is shifted when it is stored
- into the instruction code. */
- int op_shift;
- /* Non-zero if the short form is unsigned. */
- int unsp;
- /* Non-zero if the extended form is unsigned. */
- int extu;
- /* Non-zero if the value is PC relative. */
- int pcrel;
-};
+ tokens = mips_parse_arguments (s, 0);
+ if (!tokens)
+ return;
-/* The mips16 immediate operand types. */
-
-static const struct mips16_immed_operand mips16_immed_operands[] =
-{
- { '<', 3, 5, 0, MIPS16OP_SH_RZ, 1, 1, 0 },
- { '>', 3, 5, 0, MIPS16OP_SH_RX, 1, 1, 0 },
- { '[', 3, 6, 0, MIPS16OP_SH_RZ, 1, 1, 0 },
- { ']', 3, 6, 0, MIPS16OP_SH_RX, 1, 1, 0 },
- { '4', 4, 15, 0, MIPS16OP_SH_IMM4, 0, 0, 0 },
- { '5', 5, 16, 0, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'H', 5, 16, 1, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'W', 5, 16, 2, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'D', 5, 16, 3, MIPS16OP_SH_IMM5, 1, 0, 0 },
- { 'j', 5, 16, 0, MIPS16OP_SH_IMM5, 0, 0, 0 },
- { '8', 8, 16, 0, MIPS16OP_SH_IMM8, 1, 0, 0 },
- { 'V', 8, 16, 2, MIPS16OP_SH_IMM8, 1, 0, 0 },
- { 'C', 8, 16, 3, MIPS16OP_SH_IMM8, 1, 0, 0 },
- { 'U', 8, 16, 0, MIPS16OP_SH_IMM8, 1, 1, 0 },
- { 'k', 8, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 0 },
- { 'K', 8, 16, 3, MIPS16OP_SH_IMM8, 0, 0, 0 },
- { 'p', 8, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 1 },
- { 'q', 11, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 1 },
- { 'A', 8, 16, 2, MIPS16OP_SH_IMM8, 1, 0, 1 },
- { 'B', 5, 16, 3, MIPS16OP_SH_IMM5, 1, 0, 1 },
- { 'E', 5, 16, 2, MIPS16OP_SH_IMM5, 1, 0, 1 }
-};
+ if (!match_mips16_insns (insn, first, tokens))
+ set_insn_error (0, _("invalid operands"));
-#define MIPS16_NUM_IMMED \
- (sizeof mips16_immed_operands / sizeof mips16_immed_operands[0])
+ obstack_free (&mips_operand_tokens, tokens);
+}
/* Marshal immediate value VAL for an extended MIPS16 instruction.
NBITS is the number of significant bits in VAL. */
return (extval << 16) | val;
}
+/* Like decode_mips16_operand, but require the operand to be defined and
+ require it to be an integer. */
+
+static const struct mips_int_operand *
+mips16_immed_operand (int type, bfd_boolean extended_p)
+{
+ const struct mips_operand *operand;
+
+ operand = decode_mips16_operand (type, extended_p);
+ if (!operand || (operand->type != OP_INT && operand->type != OP_PCREL))
+ abort ();
+ return (const struct mips_int_operand *) operand;
+}
+
+/* Return true if SVAL fits OPERAND. RELOC is as for mips16_immed. */
+
+static bfd_boolean
+mips16_immed_in_range_p (const struct mips_int_operand *operand,
+ bfd_reloc_code_real_type reloc, offsetT sval)
+{
+ int min_val, max_val;
+
+ min_val = mips_int_operand_min (operand);
+ max_val = mips_int_operand_max (operand);
+ if (reloc != BFD_RELOC_UNUSED)
+ {
+ if (min_val < 0)
+ sval = SEXT_16BIT (sval);
+ else
+ sval &= 0xffff;
+ }
+
+ return (sval >= min_val
+ && sval <= max_val
+ && (sval & ((1 << operand->shift) - 1)) == 0);
+}
+
/* Install immediate value VAL into MIPS16 instruction *INSN,
extending it if necessary. The instruction in *INSN may
already be extended.
bfd_reloc_code_real_type reloc, offsetT val,
unsigned int user_insn_length, unsigned long *insn)
{
- const struct mips16_immed_operand *op;
- int mintiny, maxtiny;
-
- op = mips16_immed_operands;
- while (op->type != type)
- {
- ++op;
- gas_assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
- }
-
- if (op->unsp)
- {
- if (type == '<' || type == '>' || type == '[' || type == ']')
- {
- mintiny = 1;
- maxtiny = 1 << op->nbits;
- }
- else
- {
- mintiny = 0;
- maxtiny = (1 << op->nbits) - 1;
- }
- if (reloc != BFD_RELOC_UNUSED)
- val &= 0xffff;
- }
- else
- {
- mintiny = - (1 << (op->nbits - 1));
- maxtiny = (1 << (op->nbits - 1)) - 1;
- if (reloc != BFD_RELOC_UNUSED)
- val = SEXT_16BIT (val);
- }
-
- /* Branch offsets have an implicit 0 in the lowest bit. */
- if (type == 'p' || type == 'q')
- val /= 2;
+ const struct mips_int_operand *operand;
+ unsigned int uval, length;
- if ((val & ((1 << op->shift) - 1)) != 0
- || val < (mintiny << op->shift)
- || val > (maxtiny << op->shift))
+ operand = mips16_immed_operand (type, FALSE);
+ if (!mips16_immed_in_range_p (operand, reloc, val))
{
/* We need an extended instruction. */
if (user_insn_length == 2)
_("extended operand requested but not required"));
}
- if (mips16_opcode_length (*insn) == 2)
+ length = mips16_opcode_length (*insn);
+ if (length == 4)
{
- int insnval;
-
- insnval = ((val >> op->shift) & ((1 << op->nbits) - 1));
- insnval <<= op->op_shift;
- *insn |= insnval;
+ operand = mips16_immed_operand (type, TRUE);
+ if (!mips16_immed_in_range_p (operand, reloc, val))
+ as_bad_where (file, line,
+ _("operand value out of range for instruction"));
}
+ uval = ((unsigned int) val >> operand->shift) - operand->bias;
+ if (length == 2)
+ *insn = mips_insert_operand (&operand->root, *insn, uval);
else
- {
- long minext, maxext;
-
- if (reloc == BFD_RELOC_UNUSED)
- {
- if (op->extu)
- {
- minext = 0;
- maxext = (1 << op->extbits) - 1;
- }
- else
- {
- minext = - (1 << (op->extbits - 1));
- maxext = (1 << (op->extbits - 1)) - 1;
- }
- if (val < minext || val > maxext)
- as_bad_where (file, line,
- _("operand value out of range for instruction"));
- }
-
- *insn |= mips16_immed_extend (val, op->extbits);
- }
+ *insn |= mips16_immed_extend (uval, operand->root.size);
}
\f
struct percent_op_match
mips_set_option_string (const char **string_ptr, const char *new_value)
{
if (*string_ptr != 0 && strcasecmp (*string_ptr, new_value) != 0)
- as_warn (_("A different %s was already specified, is now %s"),
+ as_warn (_("a different %s was already specified, is now %s"),
string_ptr == &mips_arch_string ? "-march" : "-mtune",
new_value);
case OPTION_64:
mips_abi = N64_ABI;
if (!support_64bit_objects())
- as_fatal (_("No compiled in support for 64 bit object file format"));
+ as_fatal (_("no compiled in support for 64 bit object file format"));
break;
case OPTION_GP32:
{
mips_abi = N64_ABI;
if (! support_64bit_objects())
- as_fatal (_("No compiled in support for 64 bit object file "
+ as_fatal (_("no compiled in support for 64 bit object file "
"format"));
}
else if (strcmp (arg, "eabi") == 0)
mips_flag_nan2008 = FALSE;
else
{
- as_fatal (_("Invalid NaN setting -mnan=%s"), arg);
+ as_fatal (_("invalid NaN setting -mnan=%s"), arg);
return 0;
}
break;
if (strncmp (TARGET_OS, "pe", 2) == 0)
{
if (g_switch_seen && g_switch_value != 0)
- as_bad (_("-G not supported in this configuration."));
+ as_bad (_("-G not supported in this configuration"));
g_switch_value = 0;
}
There's no harm in specifying both as long as the ISA levels
are the same. */
if (file_mips_isa != arch_info->isa)
- as_bad (_("-%s conflicts with the other architecture options, which imply -%s"),
+ as_bad (_("-%s conflicts with the other architecture options,"
+ " which imply -%s"),
mips_cpu_info_from_isa (file_mips_isa)->name,
mips_cpu_info_from_isa (arch_info->isa)->name);
}
/* We have no relocation type for PC relative MIPS16 instructions. */
if (fixP->fx_addsy && S_GET_SEGMENT (fixP->fx_addsy) != now_seg)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("PC relative MIPS16 instruction references a different section"));
+ _("PC relative MIPS16 instruction references"
+ " a different section"));
return addr;
}
}
}
else
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Unsupported constant in relocation"));
+ _("unsupported constant in relocation"));
}
break;
case BFD_RELOC_16_PCREL_S2:
if ((*valP & 0x3) != 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch to misaligned address (%lx)"), (long) *valP);
+ _("branch to misaligned address (%lx)"), (long) *valP);
/* We need to save the bits in the instruction since fixup_segment()
might be deleting the relocation entry (i.e., a branch within
and there's nothing we can do to fix this instruction
without turning it into a longer sequence. */
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch out of range"));
+ _("branch out of range"));
}
break;
temp = get_absolute_expression ();
if (temp > max_alignment)
- as_bad (_("Alignment too large: %d. assumed."), temp = max_alignment);
+ as_bad (_("alignment too large, %d assumed"), temp = max_alignment);
else if (temp < 0)
{
- as_warn (_("Alignment negative: 0 assumed."));
+ as_warn (_("alignment negative, 0 assumed"));
temp = 0;
}
if (*input_line_pointer == ',')
}
}
else
- as_warn (_("Unrecognized option \"%s\""), opt);
+ as_warn (_("unrecognized option \"%s\""), opt);
*input_line_pointer = c;
demand_empty_rest_of_line ();
char *s = name + 3;
if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, &mips_opts.at))
- as_bad (_("Unrecognized register name `%s'"), s);
+ as_bad (_("unrecognized register name `%s'"), s);
}
else if (strcmp (name, "at") == 0)
{
}
else
{
- as_warn (_("Tried to set unrecognized symbol: %s\n"), name);
+ as_warn (_("tried to set unrecognized symbol: %s\n"), name);
}
mips_check_isa_supports_ases ();
*input_line_pointer = ch;
if (ex.X_op != O_symbol)
{
- as_bad (_("Unsupported use of %s"), dirstr);
+ as_bad (_("unsupported use of %s"), dirstr);
ignore_rest_of_line ();
}
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .gpword"));
+ as_bad (_("unsupported use of .gpword"));
ignore_rest_of_line ();
}
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .gpdword"));
+ as_bad (_("unsupported use of .gpdword"));
ignore_rest_of_line ();
}
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .ehword"));
+ as_bad (_("unsupported use of .ehword"));
ignore_rest_of_line ();
}
&& memcmp (input_line_pointer, str_legacy, i) == 0)
mips_flag_nan2008 = FALSE;
else
- as_bad (_("Bad .nan directive"));
+ as_bad (_("bad .nan directive"));
input_line_pointer += i;
demand_empty_rest_of_line ();
mips16_extended_frag (fragS *fragp, asection *sec, long stretch)
{
int type;
- const struct mips16_immed_operand *op;
+ const struct mips_int_operand *operand;
offsetT val;
- int mintiny, maxtiny;
segT symsec;
fragS *sym_frag;
return 1;
type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
- op = mips16_immed_operands;
- while (op->type != type)
- {
- ++op;
- gas_assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
- }
-
- if (op->unsp)
- {
- if (type == '<' || type == '>' || type == '[' || type == ']')
- {
- mintiny = 1;
- maxtiny = 1 << op->nbits;
- }
- else
- {
- mintiny = 0;
- maxtiny = (1 << op->nbits) - 1;
- }
- }
- else
- {
- mintiny = - (1 << (op->nbits - 1));
- maxtiny = (1 << (op->nbits - 1)) - 1;
- }
+ operand = mips16_immed_operand (type, FALSE);
sym_frag = symbol_get_frag (fragp->fr_symbol);
val = S_GET_VALUE (fragp->fr_symbol);
symsec = S_GET_SEGMENT (fragp->fr_symbol);
- if (op->pcrel)
+ if (operand->root.type == OP_PCREL)
{
+ const struct mips_pcrel_operand *pcrel_op;
addressT addr;
+ offsetT maxtiny;
/* We won't have the section when we are called from
mips_relax_frag. However, we will always have been called
branch to a different section, we mark it as such. If SEC is
NULL, and the frag is not marked, then it must be a branch to
the same section. */
+ pcrel_op = (const struct mips_pcrel_operand *) operand;
if (sec == NULL)
{
if (RELAX_MIPS16_LONG_BRANCH (fragp->fr_subtype))
PC relative load or add is the instruction itself, but if it
is in a delay slot (in which case it can not be extended) use
the address of the instruction whose delay slot it is in. */
- if (type == 'p' || type == 'q')
+ if (pcrel_op->include_isa_bit)
{
addr += 2;
/* Ignore the low bit in the target, since it will be set
for a text label. */
- if ((val & 1) != 0)
- --val;
+ val &= -2;
}
else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
addr -= 4;
else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
addr -= 2;
- val -= addr & ~ ((1 << op->shift) - 1);
-
- /* Branch offsets have an implicit 0 in the lowest bit. */
- if (type == 'p' || type == 'q')
- val /= 2;
+ val -= addr & -(1 << pcrel_op->align_log2);
/* If any of the shifted bits are set, we must use an extended
opcode. If the address depends on the size of this
instruction, this can lead to a loop, so we arrange to always
use an extended opcode. We only check this when we are in
the main relaxation loop, when SEC is NULL. */
- if ((val & ((1 << op->shift) - 1)) != 0 && sec == NULL)
+ if ((val & ((1 << operand->shift) - 1)) != 0 && sec == NULL)
{
fragp->fr_subtype =
RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype);
}
/* If we are about to mark a frag as extended because the value
- is precisely maxtiny + 1, then there is a chance of an
- infinite loop as in the following code:
+ is precisely the next value above maxtiny, then there is a
+ chance of an infinite loop as in the following code:
la $4,foo
.skip 1020
.align 2
away, so the la can be shrunk, but then foo is 0x400 away, so
the la must be extended. To avoid this loop, we mark the
frag as extended if it was small, and is about to become
- extended with a value of maxtiny + 1. */
- if (val == ((maxtiny + 1) << op->shift)
+ extended with the next value above maxtiny. */
+ maxtiny = mips_int_operand_max (operand);
+ if (val == maxtiny + (1 << operand->shift)
&& ! RELAX_MIPS16_EXTENDED (fragp->fr_subtype)
&& sec == NULL)
{
else if (symsec != absolute_section && sec != NULL)
as_bad_where (fragp->fr_file, fragp->fr_line, _("unsupported relocation"));
- if ((val & ((1 << op->shift) - 1)) != 0
- || val < (mintiny << op->shift)
- || val > (maxtiny << op->shift))
- return 1;
- else
- return 0;
+ return !mips16_immed_in_range_p (operand, BFD_RELOC_UNUSED, val);
}
/* Compute the length of a branch sequence, and adjust the
if (reloc->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- _("Can not represent %s relocation in this object file format"),
+ _("cannot represent %s relocation in this object file"
+ " format"),
bfd_get_reloc_code_name (code));
retval[0] = NULL;
}
int i;
as_warn_where (fragp->fr_file, fragp->fr_line,
- _("Relaxed out-of-range branch into a jump"));
+ _("relaxed out-of-range branch into a jump"));
if (RELAX_BRANCH_UNCOND (fragp->fr_subtype))
goto uncond;
/* Relax 32-bit branches to a sequence of instructions. */
as_warn_where (fragp->fr_file, fragp->fr_line,
- _("Relaxed out-of-range branch into a jump"));
+ _("relaxed out-of-range branch into a jump"));
/* Set the short-delay-slot bit. */
short_ds = al && (insn & 0x02000000) != 0;
if (RELAX_MIPS16_P (fragp->fr_subtype))
{
int type;
- const struct mips16_immed_operand *op;
+ const struct mips_int_operand *operand;
offsetT val;
char *buf;
unsigned int user_length, length;
bfd_boolean ext;
type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
- op = mips16_immed_operands;
- while (op->type != type)
- ++op;
+ operand = mips16_immed_operand (type, FALSE);
ext = RELAX_MIPS16_EXTENDED (fragp->fr_subtype);
val = resolve_symbol_value (fragp->fr_symbol);
- if (op->pcrel)
+ if (operand->root.type == OP_PCREL)
{
+ const struct mips_pcrel_operand *pcrel_op;
addressT addr;
+ pcrel_op = (const struct mips_pcrel_operand *) operand;
addr = fragp->fr_address + fragp->fr_fix;
/* The rules for the base address of a PC relative reloc are
complicated; see mips16_extended_frag. */
- if (type == 'p' || type == 'q')
+ if (pcrel_op->include_isa_bit)
{
addr += 2;
if (ext)
addr += 2;
/* Ignore the low bit in the target, since it will be
set for a text label. */
- if ((val & 1) != 0)
- --val;
+ val &= -2;
}
else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
addr -= 4;
else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
addr -= 2;
- addr &= ~ (addressT) ((1 << op->shift) - 1);
+ addr &= -(1 << pcrel_op->align_log2);
val -= addr;
/* Make sure the section winds up with the alignment we have
assumed. */
- if (op->shift > 0)
- record_alignment (asec, op->shift);
+ if (operand->shift > 0)
+ record_alignment (asec, operand->shift);
}
if (ext
if (!cur_proc_ptr)
{
- as_warn (_(".end directive without a preceding .ent directive."));
+ as_warn (_(".end directive without a preceding .ent directive"));
demand_empty_rest_of_line ();
return;
}
{
gas_assert (S_GET_NAME (p));
if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->func_sym)))
- as_warn (_(".end symbol does not match .ent symbol."));
+ as_warn (_(".end symbol does not match .ent symbol"));
if (debug_type == DEBUG_STABS)
stabs_generate_asm_endfunc (S_GET_NAME (p),
get_number ();
if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) == 0)
- as_warn (_(".ent or .aent not in text section."));
+ as_warn (_(".ent or .aent not in text section"));
if (!aent && cur_proc_ptr)
as_warn (_("missing .end"));
if (*input_line_pointer++ != ','
|| get_absolute_expression_and_terminator (&val) != ',')
{
- as_warn (_("Bad .frame directive"));
+ as_warn (_("bad .frame directive"));
--input_line_pointer;
demand_empty_rest_of_line ();
return;
if (get_absolute_expression_and_terminator (&mask) != ',')
{
- as_warn (_("Bad .mask/.fmask directive"));
+ as_warn (_("bad .mask/.fmask directive"));
--input_line_pointer;
demand_empty_rest_of_line ();
return;
if (mips_matching_cpu_name_p (p->name, cpu_string))
return p;
- as_bad (_("Bad value (%s) for %s"), cpu_string, option);
+ as_bad (_("bad value (%s) for %s"), cpu_string, option);
return 0;
}