/* tc-sh.c -- Assemble code for the Renesas / SuperH SH
- Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
- 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1993-2016 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
accommodate the insns seen so far. */
static unsigned int valid_arch;
+#ifdef OBJ_ELF
+/* Whether --fdpic was given. */
+static int sh_fdpic;
+#endif
+
const char EXP_CHARS[] = "eE";
/* Chars that mean this number is a floating point constant. */
#if BFD_HOST_64BIT_LONG
/* The "reach" type is long, so we can only do this for a 64-bit-long
host. */
-#define SH64PCREL32_M (((long) -1 << 30) * 2 - 4)
+#define SH64PCREL32_M ((-((long) 1 << 30)) * 2 - 4)
#define SH64PCREL48_F ((((long) 1 << 47) - 1) - 4)
-#define SH64PCREL48_M (((long) -1 << 47) - 4)
+#define SH64PCREL48_M ((-((long) 1 << 47)) - 4)
#define SH64PCREL48_LENGTH (3 * 4)
#else
/* If the host does not have 64-bit longs, just make this state identical
in reach to the 32-bit state. Note that we have a slightly incorrect
reach, but the correct one above will overflow a 32-bit number. */
-#define SH64PCREL32_M (((long) -1 << 30) * 2)
+#define SH64PCREL32_M ((-((long) 1 << 30)) * 2)
#define SH64PCREL48_F SH64PCREL32_F
#define SH64PCREL48_M SH64PCREL32_M
#define SH64PCREL48_LENGTH (3 * 4)
#if BFD_HOST_64BIT_LONG
/* The "reach" type is long, so we can only do this for a 64-bit-long
host. */
-#define MOVI_32_M (((long) -1 << 30) * 2 - 4)
+#define MOVI_32_M ((-((long) 1 << 30)) * 2 - 4)
#define MOVI_48_F ((((long) 1 << 47) - 1) - 4)
-#define MOVI_48_M (((long) -1 << 47) - 4)
+#define MOVI_48_M ((-((long) 1 << 47)) - 4)
#else
/* If the host does not have 64-bit longs, just make this state identical
in reach to the 32-bit state. Note that we have a slightly incorrect
reach, but the correct one above will overflow a 32-bit number. */
-#define MOVI_32_M (((long) -1 << 30) * 2)
+#define MOVI_32_M ((-((long) 1 << 30)) * 2)
#define MOVI_48_F MOVI_32_F
#define MOVI_48_M MOVI_32_M
#endif /* BFD_HOST_64BIT_LONG */
if (exp->X_op == O_PIC_reloc)
{
-#ifdef HAVE_SH64
switch (*r_type_p)
{
case BFD_RELOC_NONE:
*r_type_p = exp->X_md;
break;
+ case BFD_RELOC_SH_DISP20:
+ switch (exp->X_md)
+ {
+ case BFD_RELOC_32_GOT_PCREL:
+ *r_type_p = BFD_RELOC_SH_GOT20;
+ break;
+
+ case BFD_RELOC_32_GOTOFF:
+ *r_type_p = BFD_RELOC_SH_GOTOFF20;
+ break;
+
+ case BFD_RELOC_SH_GOTFUNCDESC:
+ *r_type_p = BFD_RELOC_SH_GOTFUNCDESC20;
+ break;
+
+ case BFD_RELOC_SH_GOTOFFFUNCDESC:
+ *r_type_p = BFD_RELOC_SH_GOTOFFFUNCDESC20;
+ break;
+
+ default:
+ abort ();
+ }
+ break;
+
+#ifdef HAVE_SH64
case BFD_RELOC_SH_IMM_LOW16:
switch (exp->X_md)
{
abort ();
}
break;
+#endif
default:
abort ();
}
-#else
- *r_type_p = exp->X_md;
-#endif
if (exp == main_exp)
exp->X_op = O_symbol;
else
/* Add expression EXP of SIZE bytes to offset OFF of fragment FRAG. */
void
-sh_cons_fix_new (fragS *frag, int off, int size, expressionS *exp)
+sh_cons_fix_new (fragS *frag, int off, int size, expressionS *exp,
+ bfd_reloc_code_real_type r_type)
{
- bfd_reloc_code_real_type r_type = BFD_RELOC_UNUSED;
+ r_type = BFD_RELOC_UNUSED;
if (sh_check_fixup (exp, &r_type))
as_bad (_("Invalid PIC expression."));
r_type = BFD_RELOC_32;
break;
-#ifdef HAVE_SH64
case 8:
r_type = BFD_RELOC_64;
break;
-#endif
default:
goto error;
/* Clobbers input_line_pointer, checks end-of-line. */
/* NBYTES 1=.byte, 2=.word, 4=.long */
static void
-sh_elf_cons (register int nbytes)
+sh_elf_cons (int nbytes)
{
expressionS exp;
else
demand_empty_rest_of_line ();
}
-#endif /* OBJ_ELF */
+/* The regular frag_offset_fixed_p doesn't work for rs_align_test
+ frags. */
+
+static bfd_boolean
+align_test_frag_offset_fixed_p (const fragS *frag1, const fragS *frag2,
+ bfd_vma *offset)
+{
+ const fragS *frag;
+ bfd_vma off;
+
+ /* Start with offset initialised to difference between the two frags.
+ Prior to assigning frag addresses this will be zero. */
+ off = frag1->fr_address - frag2->fr_address;
+ if (frag1 == frag2)
+ {
+ *offset = off;
+ return TRUE;
+ }
+
+ /* Maybe frag2 is after frag1. */
+ frag = frag1;
+ while (frag->fr_type == rs_fill
+ || frag->fr_type == rs_align_test)
+ {
+ if (frag->fr_type == rs_fill)
+ off += frag->fr_fix + frag->fr_offset * frag->fr_var;
+ else
+ off += frag->fr_fix;
+ frag = frag->fr_next;
+ if (frag == NULL)
+ break;
+ if (frag == frag2)
+ {
+ *offset = off;
+ return TRUE;
+ }
+ }
+
+ /* Maybe frag1 is after frag2. */
+ off = frag1->fr_address - frag2->fr_address;
+ frag = frag2;
+ while (frag->fr_type == rs_fill
+ || frag->fr_type == rs_align_test)
+ {
+ if (frag->fr_type == rs_fill)
+ off -= frag->fr_fix + frag->fr_offset * frag->fr_var;
+ else
+ off -= frag->fr_fix;
+ frag = frag->fr_next;
+ if (frag == NULL)
+ break;
+ if (frag == frag1)
+ {
+ *offset = off;
+ return TRUE;
+ }
+ }
+
+ return FALSE;
+}
+
+/* Optimize a difference of symbols which have rs_align_test frag if
+ possible. */
+
+int
+sh_optimize_expr (expressionS *l, operatorT op, expressionS *r)
+{
+ bfd_vma frag_off;
+
+ if (op == O_subtract
+ && l->X_op == O_symbol
+ && r->X_op == O_symbol
+ && S_GET_SEGMENT (l->X_add_symbol) == S_GET_SEGMENT (r->X_add_symbol)
+ && (SEG_NORMAL (S_GET_SEGMENT (l->X_add_symbol))
+ || r->X_add_symbol == l->X_add_symbol)
+ && align_test_frag_offset_fixed_p (symbol_get_frag (l->X_add_symbol),
+ symbol_get_frag (r->X_add_symbol),
+ &frag_off))
+ {
+ offsetT symval_diff = S_GET_VALUE (l->X_add_symbol)
+ - S_GET_VALUE (r->X_add_symbol);
+ subtract_from_result (l, r->X_add_number, r->X_extrabit);
+ subtract_from_result (l, frag_off / OCTETS_PER_BYTE, 0);
+ add_to_result (l, symval_diff, symval_diff < 0);
+ l->X_op = O_constant;
+ l->X_add_symbol = 0;
+ return 1;
+ }
+ return 0;
+}
+#endif /* OBJ_ELF */
\f
/* This function is called once, at assembler startup time. This should
set up all the tables, etc that the MD part of the assembler needs. */
md_begin (void)
{
const sh_opcode_info *opcode;
- char *prev_name = "";
+ const char *prev_name = "";
unsigned int target_arch;
target_arch
}
else
prefix = 0;
-
+
consumed = parse_reg_without_prefix (src, mode, reg);
if (consumed == 0)
parse_exp (char *s, sh_operand_info *op)
{
char *save;
- char *new;
+ char *new_pointer;
save = input_line_pointer;
input_line_pointer = s;
expression (&op->immediate);
if (op->immediate.X_op == O_absent)
as_bad (_("missing operand"));
-#ifdef OBJ_ELF
- else if (op->immediate.X_op == O_PIC_reloc
- || sh_PIC_related_p (op->immediate.X_add_symbol)
- || sh_PIC_related_p (op->immediate.X_op_symbol))
- as_bad (_("misplaced PIC operand"));
-#endif
- new = input_line_pointer;
+ new_pointer = input_line_pointer;
input_line_pointer = save;
- return new;
+ return new_pointer;
}
/* The many forms of operand:
get_specific (sh_opcode_info *opcode, sh_operand_info *operands)
{
sh_opcode_info *this_try = opcode;
- char *name = opcode->name;
+ const char *name = opcode->name;
int n = 0;
while (opcode->name)
sh_operand_info *user = operands + n;
sh_arg_type arg = this_try->arg[n];
- if (SH_MERGE_ARCH_SET_VALID (valid_arch, arch_sh2a_nofpu_up)
- && ( arg == A_DISP_REG_M
- || arg == A_DISP_REG_N))
- {
- /* Check a few key IMM* fields for overflow. */
- int opf;
- long val = user->immediate.X_add_number;
-
- for (opf = 0; opf < 4; opf ++)
- switch (this_try->nibbles[opf])
- {
- case IMM0_4:
- case IMM1_4:
- if (val < 0 || val > 15)
- goto fail;
- break;
- case IMM0_4BY2:
- case IMM1_4BY2:
- if (val < 0 || val > 15 * 2)
- goto fail;
- break;
- case IMM0_4BY4:
- case IMM1_4BY4:
- if (val < 0 || val > 15 * 4)
- goto fail;
- break;
- default:
- break;
- }
- }
switch (arg)
{
case A_DISP_PC:
printf (_("unhandled %d\n"), arg);
goto fail;
}
+ if (SH_MERGE_ARCH_SET_VALID (valid_arch, arch_sh2a_nofpu_up)
+ && ( arg == A_DISP_REG_M
+ || arg == A_DISP_REG_N))
+ {
+ /* Check a few key IMM* fields for overflow. */
+ int opf;
+ long val = user->immediate.X_add_number;
+
+ for (opf = 0; opf < 4; opf ++)
+ switch (this_try->nibbles[opf])
+ {
+ case IMM0_4:
+ case IMM1_4:
+ if (val < 0 || val > 15)
+ goto fail;
+ break;
+ case IMM0_4BY2:
+ case IMM1_4BY2:
+ if (val < 0 || val > 15 * 2)
+ goto fail;
+ break;
+ case IMM0_4BY4:
+ case IMM1_4BY4:
+ if (val < 0 || val > 15 * 4)
+ goto fail;
+ break;
+ default:
+ break;
+ }
+ }
}
if ( !SH_MERGE_ARCH_SET_VALID (valid_arch, this_try->arch))
goto fail;
static char *
insert_loop_bounds (char *output, sh_operand_info *operand)
{
- char *name;
symbolS *end_sym;
/* Since the low byte of the opcode will be overwritten by the reloc, we
if (sh_relax)
{
static int count = 0;
+ char name[11];
/* If the last loop insn is a two-byte-insn, it is in danger of being
swapped with the insn after it. To prevent this, create a new
right in the middle, but four byte insns are not swapped anyways. */
/* A REPEAT takes 6 bytes. The SH has a 32 bit address space.
Hence a 9 digit number should be enough to count all REPEATs. */
- name = alloca (11);
sprintf (name, "_R%x", count++ & 0x3fffffff);
end_sym = symbol_new (name, undefined_section, 0, &zero_address_frag);
/* Make this a local symbol. */
static unsigned int
build_Mytes (sh_opcode_info *opcode, sh_operand_info *operand)
{
- int index;
+ int indx;
char nbuf[8];
char *output;
unsigned int size = 2;
int low_byte = target_big_endian ? 1 : 0;
int max_index = 4;
+ bfd_reloc_code_real_type r_type;
+#ifdef OBJ_ELF
+ int unhandled_pic = 0;
+#endif
nbuf[0] = 0;
nbuf[1] = 0;
nbuf[6] = 0;
nbuf[7] = 0;
+#ifdef OBJ_ELF
+ for (indx = 0; indx < 3; indx++)
+ if (opcode->arg[indx] == A_IMM
+ && operand[indx].type == A_IMM
+ && (operand[indx].immediate.X_op == O_PIC_reloc
+ || sh_PIC_related_p (operand[indx].immediate.X_add_symbol)
+ || sh_PIC_related_p (operand[indx].immediate.X_op_symbol)))
+ unhandled_pic = 1;
+#endif
+
if (SH_MERGE_ARCH_SET (opcode->arch, arch_op32))
{
output = frag_more (4);
else
output = frag_more (2);
- for (index = 0; index < max_index; index++)
+ for (indx = 0; indx < max_index; indx++)
{
- sh_nibble_type i = opcode->nibbles[index];
+ sh_nibble_type i = opcode->nibbles[indx];
if (i < 16)
{
- nbuf[index] = i;
+ nbuf[indx] = i;
}
else
{
{
case REG_N:
case REG_N_D:
- nbuf[index] = reg_n;
+ nbuf[indx] = reg_n;
break;
case REG_M:
- nbuf[index] = reg_m;
+ nbuf[indx] = reg_m;
break;
case SDT_REG_N:
if (reg_n < 2 || reg_n > 5)
as_bad (_("Invalid register: 'r%d'"), reg_n);
- nbuf[index] = (reg_n & 3) | 4;
+ nbuf[indx] = (reg_n & 3) | 4;
break;
case REG_NM:
- nbuf[index] = reg_n | (reg_m >> 2);
+ nbuf[indx] = reg_n | (reg_m >> 2);
break;
case REG_B:
- nbuf[index] = reg_b | 0x08;
+ nbuf[indx] = reg_b | 0x08;
break;
case REG_N_B01:
- nbuf[index] = reg_n | 0x01;
+ nbuf[indx] = reg_n | 0x01;
break;
case IMM0_3s:
- nbuf[index] |= 0x08;
+ nbuf[indx] |= 0x08;
case IMM0_3c:
insert (output + low_byte, BFD_RELOC_SH_IMM3, 0, operand);
break;
case IMM0_3Us:
- nbuf[index] |= 0x80;
+ nbuf[indx] |= 0x80;
case IMM0_3Uc:
insert (output + low_byte, BFD_RELOC_SH_IMM3U, 0, operand);
break;
case IMM0_20_4:
break;
case IMM0_20:
- insert4 (output, BFD_RELOC_SH_DISP20, 0, operand);
+ r_type = BFD_RELOC_SH_DISP20;
+#ifdef OBJ_ELF
+ if (sh_check_fixup (&operand->immediate, &r_type))
+ as_bad (_("Invalid PIC expression."));
+ unhandled_pic = 0;
+#endif
+ insert4 (output, r_type, 0, operand);
break;
case IMM0_20BY8:
insert4 (output, BFD_RELOC_SH_DISP20BY8, 0, operand);
break;
case REPEAT:
output = insert_loop_bounds (output, operand);
- nbuf[index] = opcode->nibbles[3];
+ nbuf[indx] = opcode->nibbles[3];
operand += 2;
break;
default:
}
}
}
+#ifdef OBJ_ELF
+ if (unhandled_pic)
+ as_bad (_("misplaced PIC operand"));
+#endif
if (!target_big_endian)
{
output[1] = (nbuf[0] << 4) | (nbuf[1]);
unsigned char *op_start;
unsigned char *op_end;
char name[20];
- int nlen = 0;
+ unsigned int nlen = 0;
/* Drop leading whitespace. */
while (*str == ' ')
assemble_ppi, so the opcode might be terminated by an '@'. */
for (op_start = op_end = (unsigned char *) str;
*op_end
- && nlen < 20
+ && nlen < sizeof (name) - 1
&& !is_end_of_line[*op_end] && *op_end != ' ' && *op_end != '@';
op_end++)
{
as_bad (_("Delayed branches not available on SH1"));
parse_exp (op_end + 1, &operand[0]);
build_relax (opcode, &operand[0]);
+
+ /* All branches are currently 16 bit. */
+ size = 2;
}
else
{
}
/* Various routines to kill one day. */
-/* Equal to MAX_PRECISION in atof-ieee.c. */
-#define MAX_LITTLENUMS 6
-
-/* Turn a string in input_line_pointer into a floating point constant
- of type TYPE, and store the appropriate bytes in *LITP. The number
- of LITTLENUMS emitted is stored in *SIZEP . An error message is
- returned, or NULL on OK. */
-char *
+const char *
md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[4];
- char *t;
- int i;
-
- switch (type)
- {
- case 'f':
- prec = 2;
- break;
-
- case 'd':
- prec = 4;
- break;
-
- default:
- *sizeP = 0;
- return _("bad call to md_atof");
- }
-
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * 2;
-
- if (! target_big_endian)
- {
- for (i = prec - 1; i >= 0; i--)
- {
- md_number_to_chars (litP, (valueT) words[i], 2);
- litP += 2;
- }
- }
- else
- {
- for (i = 0; i < prec; i++)
- {
- md_number_to_chars (litP, (valueT) words[i], 2);
- litP += 2;
- }
- }
-
- return NULL;
+ return ieee_md_atof (type, litP, sizeP, target_big_endian);
}
/* Handle the .uses pseudo-op. This pseudo-op is used just before a
OPTION_SHCOMPACT_CONST_CRANGE,
OPTION_NO_EXPAND,
OPTION_PT32,
+#endif
+ OPTION_H_TICK_HEX,
+#ifdef OBJ_ELF
+ OPTION_FDPIC,
#endif
OPTION_DUMMY /* Not used. This is just here to make it easy to add and subtract options from this enum. */
};
{"no-expand", no_argument, NULL, OPTION_NO_EXPAND},
{"expand-pt32", no_argument, NULL, OPTION_PT32},
#endif /* HAVE_SH64 */
+ { "h-tick-hex", no_argument, NULL, OPTION_H_TICK_HEX },
+
+#ifdef OBJ_ELF
+ {"fdpic", no_argument, NULL, OPTION_FDPIC},
+#endif
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
int
-md_parse_option (int c, char *arg ATTRIBUTE_UNUSED)
+md_parse_option (int c, const char *arg ATTRIBUTE_UNUSED)
{
switch (c)
{
for (; bfd_arch; bfd_arch=bfd_arch->next)
{
int len = strlen(bfd_arch->printable_name);
-
+
if (bfd_arch->mach == bfd_mach_sh5)
continue;
-
+
if (strncasecmp (bfd_arch->printable_name, arg, len) != 0)
continue;
continue;
break;
}
-
+
if (!preset_target_arch)
- as_bad ("Invalid argument to --isa option: %s", arg);
+ as_bad (_("Invalid argument to --isa option: %s"), arg);
}
break;
sh64_abi = sh64_abi_64;
}
else
- as_bad ("Invalid argument to --abi option: %s", arg);
+ as_bad (_("Invalid argument to --abi option: %s"), arg);
break;
case OPTION_NO_MIX:
break;
#endif /* HAVE_SH64 */
+ case OPTION_H_TICK_HEX:
+ enable_h_tick_hex = 1;
+ break;
+
+#ifdef OBJ_ELF
+ case OPTION_FDPIC:
+ sh_fdpic = TRUE;
+ break;
+#endif /* OBJ_ELF */
+
default:
return 0;
}
--expand-pt32 with -abi=64, expand PT, PTA and PTB instructions\n\
to 32 bits only\n"));
#endif /* HAVE_SH64 */
+#ifdef OBJ_ELF
+ fprintf (stream, _("\
+--fdpic generate an FDPIC object file\n"));
+#endif /* OBJ_ELF */
}
\f
/* This struct is used to pass arguments to sh_count_relocs through
return size;
#else /* ! OBJ_ELF */
return ((size + (1 << bfd_get_section_alignment (stdoutput, seg)) - 1)
- & (-1 << bfd_get_section_alignment (stdoutput, seg)));
+ & -(1 << bfd_get_section_alignment (stdoutput, seg)));
#endif /* ! OBJ_ELF */
}
sh_cons_align (int nbytes)
{
int nalign;
- char *p;
if (sh_no_align_cons)
{
return;
}
- p = frag_var (rs_align_test, 1, 1, (relax_substateT) 0,
- (symbolS *) NULL, (offsetT) nalign, (char *) NULL);
+ frag_var (rs_align_test, 1, 1, (relax_substateT) 0,
+ (symbolS *) NULL, (offsetT) nalign, (char *) NULL);
record_alignment (now_seg, nalign);
}
else if (frag->fr_type == rs_align_test)
{
if (bytes != 0)
- as_warn_where (frag->fr_file, frag->fr_line, _("misaligned data"));
+ as_bad_where (frag->fr_file, frag->fr_line, _("misaligned data"));
}
if (sh_relax
{
if (fixP->fx_r_type == BFD_RELOC_32_PLT_PCREL
|| fixP->fx_r_type == BFD_RELOC_32_GOT_PCREL
+ || fixP->fx_r_type == BFD_RELOC_SH_GOT20
|| fixP->fx_r_type == BFD_RELOC_SH_GOTPC
+ || fixP->fx_r_type == BFD_RELOC_SH_GOTFUNCDESC
+ || fixP->fx_r_type == BFD_RELOC_SH_GOTFUNCDESC20
+ || fixP->fx_r_type == BFD_RELOC_SH_GOTOFFFUNCDESC
+ || fixP->fx_r_type == BFD_RELOC_SH_GOTOFFFUNCDESC20
+ || fixP->fx_r_type == BFD_RELOC_SH_FUNCDESC
|| ((fixP->fx_r_type == BFD_RELOC_32) && dont_adjust_reloc_32)
|| fixP->fx_r_type == BFD_RELOC_RVA)
return 0;
elf_elfheader (stdoutput)->e_flags &= ~EF_SH_MACH_MASK;
elf_elfheader (stdoutput)->e_flags |= val;
+
+ if (sh_fdpic)
+ elf_elfheader (stdoutput)->e_flags |= EF_SH_FDPIC;
+}
+#endif
+
+#ifdef TE_UCLINUX
+/* Return the target format for uClinux. */
+
+const char *
+sh_uclinux_target_format (void)
+{
+ if (sh_fdpic)
+ return (!target_big_endian ? "elf32-sh-fdpic" : "elf32-shbig-fdpic");
+ else
+ return (!target_big_endian ? "elf32-shl" : "elf32-sh");
}
#endif
the other symbol. We have to adjust the relocation type here. */
if (fixP->fx_pcrel)
{
+#ifndef HAVE_SH64
+ /* Safeguard; this must not occur for non-sh64 configurations. */
+ gas_assert (fixP->fx_r_type != BFD_RELOC_64);
+#endif
+
switch (fixP->fx_r_type)
{
default:
break;
case BFD_RELOC_SH_PCRELIMM8BY4:
+ /* If we are dealing with a known destination ... */
+ if ((fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy))
+ && (fixP->fx_subsy == NULL || S_IS_DEFINED (fixP->fx_addsy)))
+ {
+ /* Don't silently move the destination due to misalignment.
+ The absolute address is the fragment base plus the offset into
+ the fragment plus the pc relative offset to the label. */
+ if ((fixP->fx_frag->fr_address + fixP->fx_where + val) & 3)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("offset to unaligned destination"));
+
+ /* The displacement cannot be zero or backward even if aligned.
+ Allow -2 because val has already been adjusted somewhere. */
+ if (val < -2)
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("negative offset"));
+ }
+
/* The lower two bits of the PC are cleared before the
displacement is added in. We can assume that the destination
is on a 4 byte boundary. If this instruction is also on a 4
buf[highbyte] |= (val >> 8) & 0xf;
break;
+#ifndef HAVE_SH64
+ case BFD_RELOC_64:
+ apply_full_field_fix (fixP, buf, *valP, 8);
+ break;
+#endif
+
case BFD_RELOC_32:
case BFD_RELOC_32_PCREL:
apply_full_field_fix (fixP, buf, val, 4);
S_SET_THREAD_LOCAL (fixP->fx_addsy);
/* Fallthrough */
case BFD_RELOC_32_GOT_PCREL:
+ case BFD_RELOC_SH_GOT20:
case BFD_RELOC_SH_GOTPLT32:
+ case BFD_RELOC_SH_GOTFUNCDESC:
+ case BFD_RELOC_SH_GOTFUNCDESC20:
+ case BFD_RELOC_SH_GOTOFFFUNCDESC:
+ case BFD_RELOC_SH_GOTOFFFUNCDESC20:
+ case BFD_RELOC_SH_FUNCDESC:
* valP = 0; /* Fully resolved at runtime. No addend. */
apply_full_field_fix (fixP, buf, 0, 4);
break;
S_SET_THREAD_LOCAL (fixP->fx_addsy);
/* Fallthrough */
case BFD_RELOC_32_GOTOFF:
+ case BFD_RELOC_SH_GOTOFF20:
apply_full_field_fix (fixP, buf, val, 4);
break;
#endif
val = ((val >> shift)
| ((long) -1 & ~ ((long) -1 >> shift)));
}
+
+ /* Extend sign for 64-bit host. */
+ val = ((val & 0xffffffff) ^ 0x80000000) - 0x80000000;
if (max != 0 && (val < min || val > max))
as_bad_where (fixP->fx_file, fixP->fx_line, _("offset out of range"));
else if (max != 0)
if (SWITCH_TABLE (fixp))
{
*rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy);
- rel->addend = 0;
+ rel->addend = rel->address - S_GET_VALUE(fixp->fx_subsy);
if (r_type == BFD_RELOC_16)
r_type = BFD_RELOC_SH_SWITCH16;
else if (r_type == BFD_RELOC_8)
bfd_get_reloc_code_name (r_type));
/* Set howto to a garbage value so that we can keep going. */
rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
- assert (rel->howto != NULL);
+ gas_assert (rel->howto != NULL);
}
#ifdef OBJ_ELF
else if (rel->howto->type == R_SH_IND12W)
#ifdef OBJ_ELF
inline static char *
-sh_end_of_match (char *cont, char *what)
+sh_end_of_match (char *cont, const char *what)
{
int len = strlen (what);
reloc_type = BFD_RELOC_SH_TLS_LE_32;
else if ((next_end = sh_end_of_match (next + 1, "DTPOFF")))
reloc_type = BFD_RELOC_SH_TLS_LDO_32;
+ else if ((next_end = sh_end_of_match (next + 1, "PCREL")))
+ reloc_type = BFD_RELOC_32_PCREL;
+ else if ((next_end = sh_end_of_match (next + 1, "GOTFUNCDESC")))
+ reloc_type = BFD_RELOC_SH_GOTFUNCDESC;
+ else if ((next_end = sh_end_of_match (next + 1, "GOTOFFFUNCDESC")))
+ reloc_type = BFD_RELOC_SH_GOTOFFFUNCDESC;
+ else if ((next_end = sh_end_of_match (next + 1, "FUNCDESC")))
+ reloc_type = BFD_RELOC_SH_FUNCDESC;
else
goto no_suffix;
unsigned int i;
const char *p;
char *q;
- static struct { char *name; int dw2regnum; } regnames[] =
+ static struct { const char *name; int dw2regnum; } regnames[] =
{
{ "pr", 17 }, { "t", 18 }, { "gbr", 19 }, { "mach", 20 },
{ "macl", 21 }, { "fpul", 23 }
projects / deliverable / binutils-gdb.git / blobdiff