/* tc-sh.c -- Assemble code for the Hitachi Super-H
- Copyright (C) 1993, 94, 95, 96, 97, 98, 1999 Free Software Foundation.
+ Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-/*
- Written By Steve Chamberlain
- sac@cygnus.com
- */
+/* Written By Steve Chamberlain <sac@cygnus.com> */
#include <stdio.h>
#include "as.h"
#define DEFINE_TABLE
#include "opcodes/sh-opc.h"
#include <ctype.h>
+#include "struc-symbol.h"
#ifdef OBJ_ELF
#include "elf/sh.h"
#endif
+#include "dwarf2dbg.h"
+
const char comment_chars[] = "!";
const char line_separator_chars[] = ";";
const char line_comment_chars[] = "!#";
void s_align_bytes ();
static void s_uacons PARAMS ((int));
static sh_opcode_info *find_cooked_opcode PARAMS ((char **));
-static void assemble_ppi PARAMS ((char *, sh_opcode_info *));
+static unsigned int assemble_ppi PARAMS ((char *, sh_opcode_info *));
+
+#ifdef OBJ_ELF
+static void sh_elf_cons PARAMS ((int));
+
+symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */
+#endif
int shl = 0;
static void
little (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
shl = 1;
target_big_endian = 0;
has to support. The fields are:
pseudo-op name without dot
function to call to execute this pseudo-op
- Integer arg to pass to the function
- */
+ Integer arg to pass to the function. */
const pseudo_typeS md_pseudo_table[] =
{
+#ifdef OBJ_ELF
+ {"long", sh_elf_cons, 4},
+ {"int", sh_elf_cons, 4},
+ {"word", sh_elf_cons, 2},
+ {"short", sh_elf_cons, 2},
+#else
{"int", cons, 4},
{"word", cons, 2},
+#endif /* OBJ_ELF */
{"form", listing_psize, 0},
{"little", little, 0},
{"heading", listing_title, 0},
{"uses", s_uses, 0},
{"uaword", s_uacons, 2},
{"ualong", s_uacons, 4},
+ {"uaquad", s_uacons, 8},
+ {"2byte", s_uacons, 2},
+ {"4byte", s_uacons, 4},
+ {"8byte", s_uacons, 8},
+#ifdef BFD_ASSEMBLER
+ {"file", dwarf2_directive_file, 0 },
+ {"loc", dwarf2_directive_loc, 0 },
+#endif
{0, 0, 0}
};
const char EXP_CHARS[] = "eE";
-/* Chars that mean this number is a floating point constant */
+/* Chars that mean this number is a floating point constant. */
/* As in 0f12.456 */
/* or 0d1.2345e12 */
const char FLT_CHARS[] = "rRsSfFdDxXpP";
#define C(a,b) ENCODE_RELAX(a,b)
-#define JREG 14 /* Register used as a temp when relaxing */
#define ENCODE_RELAX(what,length) (((what) << 4) + (length))
#define GET_WHAT(x) ((x>>4))
-/* These are the three types of relaxable instrction */
+/* These are the three types of relaxable instrction. */
#define COND_JUMP 1
#define COND_JUMP_DELAY 2
#define UNCOND_JUMP 3
#define COND8 1
#define COND12 2
#define COND32 3
-#define UNCOND12 1
-#define UNCOND32 2
#define UNDEF_WORD_DISP 4
#define UNCOND12 1
#define UNCOND32_M -(1<<30)
#define UNCOND32_LENGTH 14
+#define EMPTY { 0, 0, 0, 0 }
+
const relax_typeS md_relax_table[C (END, 0)] = {
- { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
- { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
- { 0 },
+ EMPTY,
/* C (COND_JUMP, COND8) */
{ COND8_F, COND8_M, COND8_LENGTH, C (COND_JUMP, COND12) },
/* C (COND_JUMP, COND12) */
{ COND12_F, COND12_M, COND12_LENGTH, C (COND_JUMP, COND32), },
/* C (COND_JUMP, COND32) */
{ COND32_F, COND32_M, COND32_LENGTH, 0, },
- { 0 }, { 0 }, { 0 }, { 0 },
- { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
+ /* C (COND_JUMP, UNDEF_WORD_DISP) */
+ { 0, 0, COND32_LENGTH, 0, },
+ EMPTY, EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
- { 0 },
+ EMPTY,
/* C (COND_JUMP_DELAY, COND8) */
{ COND8_F, COND8_M, COND8_LENGTH, C (COND_JUMP_DELAY, COND12) },
/* C (COND_JUMP_DELAY, COND12) */
{ COND12_F, COND12_M, COND12_DELAY_LENGTH, C (COND_JUMP_DELAY, COND32), },
/* C (COND_JUMP_DELAY, COND32) */
{ COND32_F, COND32_M, COND32_LENGTH, 0, },
- { 0 }, { 0 }, { 0 }, { 0 },
- { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
+ /* C (COND_JUMP_DELAY, UNDEF_WORD_DISP) */
+ { 0, 0, COND32_LENGTH, 0, },
+ EMPTY, EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
- { 0 },
+ EMPTY,
/* C (UNCOND_JUMP, UNCOND12) */
{ UNCOND12_F, UNCOND12_M, UNCOND12_LENGTH, C (UNCOND_JUMP, UNCOND32), },
/* C (UNCOND_JUMP, UNCOND32) */
{ UNCOND32_F, UNCOND32_M, UNCOND32_LENGTH, 0, },
- { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
- { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
+ EMPTY,
+ /* C (UNCOND_JUMP, UNDEF_WORD_DISP) */
+ { 0, 0, UNCOND32_LENGTH, 0, },
+ EMPTY, EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
};
+#undef EMPTY
+
static struct hash_control *opcode_hash_control; /* Opcode mnemonics */
-/*
- This function is called once, at assembler startup time. This should
- set up all the tables, etc that the MD part of the assembler needs
- */
+\f
+#ifdef OBJ_ELF
+/* Parse @got, etc. and return the desired relocation.
+ If we have additional arithmetic expression, then we fill in new_exp_p. */
+static bfd_reloc_code_real_type
+sh_elf_suffix (str_p, exp_p, new_exp_p)
+ char **str_p;
+ expressionS *exp_p, *new_exp_p;
+{
+ struct map_bfd {
+ char *string;
+ int length;
+ bfd_reloc_code_real_type reloc;
+ };
+
+ char ident[20];
+ char *str = *str_p;
+ char *str2;
+ int ch;
+ int len;
+ struct map_bfd *ptr;
+
+#define MAP(str,reloc) { str, sizeof (str)-1, reloc }
+
+ static struct map_bfd mapping[] = {
+ MAP ("got", BFD_RELOC_32_GOT_PCREL),
+ MAP ("plt", BFD_RELOC_32_PLT_PCREL),
+ MAP ("gotoff", BFD_RELOC_32_GOTOFF),
+ { (char *)0, 0, BFD_RELOC_UNUSED }
+ };
+
+ if (*str++ != '@')
+ return BFD_RELOC_UNUSED;
+
+ for (ch = *str, str2 = ident;
+ (str2 < ident + sizeof (ident) - 1
+ && (isalnum (ch) || ch == '@'));
+ ch = *++str)
+ {
+ *str2++ = (islower (ch)) ? ch : tolower (ch);
+ }
+
+ *str2 = '\0';
+ len = str2 - ident;
+
+ ch = ident[0];
+ for (ptr = &mapping[0]; ptr->length > 0; ptr++)
+ if (ch == ptr->string[0]
+ && len == ptr->length
+ && memcmp (ident, ptr->string, ptr->length) == 0)
+ {
+ /* Now check for identifier@suffix+constant */
+ if (*str == '-' || *str == '+')
+ {
+ char *orig_line = input_line_pointer;
+
+ input_line_pointer = str;
+ expression (new_exp_p);
+ if (new_exp_p->X_op == O_constant)
+ {
+ exp_p->X_add_number += new_exp_p->X_add_number;
+ str = input_line_pointer;
+ }
+ if (new_exp_p->X_op == O_subtract)
+ str = input_line_pointer;
+
+ if (&input_line_pointer != str_p)
+ input_line_pointer = orig_line;
+ }
+
+ *str_p = str;
+ return ptr->reloc;
+ }
+
+ return BFD_RELOC_UNUSED;
+}
+
+/* The regular cons() function, that reads constants, doesn't support
+ suffixes such as @GOT, @GOTOFF and @PLT, that generate
+ machine-specific relocation types. So we must define it here. */
+/* Clobbers input_line_pointer, checks end-of-line. */
+static void
+sh_elf_cons (nbytes)
+ register int nbytes; /* 1=.byte, 2=.word, 4=.long */
+{
+ expressionS exp, new_exp;
+ bfd_reloc_code_real_type reloc;
+ const char *name;
+
+ if (is_it_end_of_statement ())
+ {
+ demand_empty_rest_of_line ();
+ return;
+ }
+
+ do
+ {
+ expression (&exp);
+ new_exp.X_op = O_absent;
+ new_exp.X_add_symbol = new_exp.X_op_symbol = NULL;
+ /* If the _GLOBAL_OFFSET_TABLE_ symbol hasn't been found yet,
+ use the name of the symbol to tell whether it's the
+ _GLOBAL_OFFSET_TABLE_. If it has, comparing the symbols is
+ sufficient. */
+ if (! GOT_symbol && exp.X_add_symbol)
+ name = S_GET_NAME (exp.X_add_symbol);
+ else
+ name = NULL;
+ /* Check whether this expression involves the
+ _GLOBAL_OFFSET_TABLE_ symbol, by itself or added to a
+ difference of two other symbols. */
+ if (((GOT_symbol && GOT_symbol == exp.X_add_symbol)
+ || (! GOT_symbol && name
+ && strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0))
+ && (exp.X_op == O_symbol
+ || (exp.X_op == O_add
+ && ((symbol_get_value_expression (exp.X_op_symbol)->X_op)
+ == O_subtract))))
+ {
+ reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput,
+ BFD_RELOC_32);
+ int size = bfd_get_reloc_size (reloc_howto);
+
+ if (GOT_symbol == NULL)
+ GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
+
+ if (size > nbytes)
+ as_bad (_("%s relocations do not fit in %d bytes\n"),
+ reloc_howto->name, nbytes);
+ else
+ {
+ register char *p = frag_more ((int) nbytes);
+ int offset = nbytes - size;
+
+ fix_new_exp (frag_now, p - frag_now->fr_literal + offset,
+ size, &exp, 0, TC_RELOC_GLOBAL_OFFSET_TABLE);
+ }
+ }
+ /* Check if this symbol involves one of the magic suffixes, such
+ as @GOT, @GOTOFF or @PLT, and determine which relocation type
+ to use. */
+ else if ((exp.X_op == O_symbol || (exp.X_op == O_add && exp.X_op_symbol))
+ && *input_line_pointer == '@'
+ && ((reloc = sh_elf_suffix (&input_line_pointer, &exp, &new_exp))
+ != BFD_RELOC_UNUSED))
+ {
+ reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput,
+ reloc);
+ int size = bfd_get_reloc_size (reloc_howto);
+
+ /* Force a GOT to be generated. */
+ if (GOT_symbol == NULL)
+ GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
+
+ if (size > nbytes)
+ as_bad (_("%s relocations do not fit in %d bytes\n"),
+ reloc_howto->name, nbytes);
+ else
+ {
+ register char *p = frag_more ((int) nbytes);
+ int offset = nbytes - size;
+
+ fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size,
+ &exp, 0, reloc);
+ if (new_exp.X_op != O_absent)
+ fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size,
+ &new_exp, 0, BFD_RELOC_32);
+ }
+ }
+ else
+ emit_expr (&exp, (unsigned int) nbytes);
+ }
+ while (*input_line_pointer++ == ',');
+
+ input_line_pointer--; /* Put terminator back into stream. */
+ if (*input_line_pointer == '#' || *input_line_pointer == '!')
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer++]);
+ }
+ else
+ demand_empty_rest_of_line ();
+}
+#endif /* OBJ_ELF */
+
+\f
+/* This function is called once, at assembler startup time. This should
+ set up all the tables, etc that the MD part of the assembler needs. */
void
md_begin ()
opcode_hash_control = hash_new ();
- /* Insert unique names into hash table */
+ /* Insert unique names into hash table. */
for (opcode = sh_table; opcode->name; opcode++)
{
if (strcmp (prev_name, opcode->name))
else
{
/* Make all the opcodes with the same name point to the same
- string */
+ string. */
opcode->name = prev_name;
}
}
static int reg_efg;
static int reg_b;
-static expressionS immediate; /* absolute expression */
-
typedef struct
{
sh_arg_type type;
int reg;
+ expressionS immediate;
}
-
sh_operand_info;
#define IDENT_CHAR(c) (isalnum (c) || (c) == '_')
-/* try and parse a reg name, returns number of chars consumed */
+/* Try to parse a reg name. Return the number of chars consumed. */
+
static int
parse_reg (src, mode, reg)
char *src;
int *mode;
int *reg;
{
+ char l0 = tolower (src[0]);
+ char l1 = l0 ? tolower (src[1]) : 0;
+
/* We use ! IDENT_CHAR for the next character after the register name, to
make sure that we won't accidentally recognize a symbol name such as
'sram' or sr_ram as being a reference to the register 'sr'. */
- if (src[0] == 'r')
+ if (l0 == 'r')
{
- if (src[1] == '1')
+ if (l1 == '1')
{
if (src[2] >= '0' && src[2] <= '5'
&& ! IDENT_CHAR ((unsigned char) src[3]))
return 3;
}
}
- if (src[1] >= '0' && src[1] <= '9'
+ if (l1 >= '0' && l1 <= '9'
&& ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = A_REG_N;
- *reg = (src[1] - '0');
+ *reg = (l1 - '0');
return 2;
}
- if (src[1] >= '0' && src[1] <= '7' && strncmp (&src[2], "_bank", 5) == 0
+ if (l1 >= '0' && l1 <= '7' && strncasecmp (&src[2], "_bank", 5) == 0
&& ! IDENT_CHAR ((unsigned char) src[7]))
{
*mode = A_REG_B;
- *reg = (src[1] - '0');
+ *reg = (l1 - '0');
return 7;
}
- if (src[1] == 'e' && ! IDENT_CHAR ((unsigned char) src[2]))
+ if (l1 == 'e' && ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = A_RE;
return 2;
}
- if (src[1] == 's' && ! IDENT_CHAR ((unsigned char) src[2]))
+ if (l1 == 's' && ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = A_RS;
return 2;
}
}
- if (src[0] == 'a')
+ if (l0 == 'a')
{
- if (src[1] == '0')
+ if (l1 == '0')
{
if (! IDENT_CHAR ((unsigned char) src[2]))
{
*reg = A_A0_NUM;
return 2;
}
- if (src[2] == 'g' && ! IDENT_CHAR ((unsigned char) src[3]))
+ if (tolower (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = DSP_REG_N;
*reg = A_A0G_NUM;
return 3;
}
}
- if (src[1] == '1')
+ if (l1 == '1')
{
if (! IDENT_CHAR ((unsigned char) src[2]))
{
*reg = A_A1_NUM;
return 2;
}
- if (src[2] == 'g' && ! IDENT_CHAR ((unsigned char) src[3]))
+ if (tolower (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = DSP_REG_N;
*reg = A_A1G_NUM;
}
}
- if (src[1] == 'x' && src[2] >= '0' && src[2] <= '1'
+ if (l1 == 'x' && src[2] >= '0' && src[2] <= '1'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_REG_N;
- *reg = 4 + (src[1] - '0');
+ *reg = 4 + (l1 - '0');
return 3;
}
- if (src[1] == 'y' && src[2] >= '0' && src[2] <= '1'
+ if (l1 == 'y' && src[2] >= '0' && src[2] <= '1'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_REG_N;
- *reg = 6 + (src[1] - '0');
+ *reg = 6 + (l1 - '0');
return 3;
}
- if (src[1] == 's' && src[2] >= '0' && src[2] <= '3'
+ if (l1 == 's' && src[2] >= '0' && src[2] <= '3'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
- int n = src[1] - '0';
+ int n = l1 - '0';
*mode = A_REG_N;
*reg = n | ((~n & 2) << 1);
}
}
- if (src[0] == 'i' && src[1] && ! IDENT_CHAR ((unsigned char) src[3]))
+ if (l0 == 'i' && l1 && ! IDENT_CHAR ((unsigned char) src[3]))
{
- if (src[1] == 's')
+ if (l1 == 's')
{
*mode = A_REG_N;
*reg = 8;
return 2;
}
- if (src[1] == 'x')
+ if (l1 == 'x')
{
*mode = A_REG_N;
*reg = 8;
return 2;
}
- if (src[1] == 'y')
+ if (l1 == 'y')
{
*mode = A_REG_N;
*reg = 9;
}
}
- if (src[0] == 'x' && src[1] >= '0' && src[1] <= '1'
+ if (l0 == 'x' && l1 >= '0' && l1 <= '1'
&& ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = DSP_REG_N;
- *reg = A_X0_NUM + src[1] - '0';
+ *reg = A_X0_NUM + l1 - '0';
return 2;
}
- if (src[0] == 'y' && src[1] >= '0' && src[1] <= '1'
+ if (l0 == 'y' && l1 >= '0' && l1 <= '1'
&& ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = DSP_REG_N;
- *reg = A_Y0_NUM + src[1] - '0';
+ *reg = A_Y0_NUM + l1 - '0';
return 2;
}
- if (src[0] == 'm' && src[1] >= '0' && src[1] <= '1'
+ if (l0 == 'm' && l1 >= '0' && l1 <= '1'
&& ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = DSP_REG_N;
- *reg = src[1] == '0' ? A_M0_NUM : A_M1_NUM;
+ *reg = l1 == '0' ? A_M0_NUM : A_M1_NUM;
return 2;
}
- if (src[0] == 's'
- && src[1] == 's'
- && src[2] == 'r' && ! IDENT_CHAR ((unsigned char) src[3]))
+ if (l0 == 's'
+ && l1 == 's'
+ && tolower (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_SSR;
return 3;
}
- if (src[0] == 's' && src[1] == 'p' && src[2] == 'c'
+ if (l0 == 's' && l1 == 'p' && tolower (src[2]) == 'c'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_SPC;
return 3;
}
- if (src[0] == 's' && src[1] == 'g' && src[2] == 'r'
+ if (l0 == 's' && l1 == 'g' && tolower (src[2]) == 'r'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_SGR;
return 3;
}
- if (src[0] == 'd' && src[1] == 's' && src[2] == 'r'
+ if (l0 == 'd' && l1 == 's' && tolower (src[2]) == 'r'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_DSR;
return 3;
}
- if (src[0] == 'd' && src[1] == 'b' && src[2] == 'r'
+ if (l0 == 'd' && l1 == 'b' && tolower (src[2]) == 'r'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_DBR;
return 3;
}
- if (src[0] == 's' && src[1] == 'r' && ! IDENT_CHAR ((unsigned char) src[2]))
+ if (l0 == 's' && l1 == 'r' && ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = A_SR;
return 2;
}
- if (src[0] == 's' && src[1] == 'p' && ! IDENT_CHAR ((unsigned char) src[2]))
+ if (l0 == 's' && l1 == 'p' && ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = A_REG_N;
*reg = 15;
return 2;
}
- if (src[0] == 'p' && src[1] == 'r' && ! IDENT_CHAR ((unsigned char) src[2]))
+ if (l0 == 'p' && l1 == 'r' && ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = A_PR;
return 2;
}
- if (src[0] == 'p' && src[1] == 'c' && ! IDENT_CHAR ((unsigned char) src[2]))
+ if (l0 == 'p' && l1 == 'c' && ! IDENT_CHAR ((unsigned char) src[2]))
{
- *mode = A_DISP_PC;
+ /* Don't use A_DISP_PC here - that would accept stuff like 'mova pc,r0'
+ and use an uninitialized immediate. */
+ *mode = A_PC;
return 2;
}
- if (src[0] == 'g' && src[1] == 'b' && src[2] == 'r'
+ if (l0 == 'g' && l1 == 'b' && tolower (src[2]) == 'r'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_GBR;
return 3;
}
- if (src[0] == 'v' && src[1] == 'b' && src[2] == 'r'
+ if (l0 == 'v' && l1 == 'b' && tolower (src[2]) == 'r'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_VBR;
return 3;
}
- if (src[0] == 'm' && src[1] == 'a' && src[2] == 'c'
+ if (l0 == 'm' && l1 == 'a' && tolower (src[2]) == 'c'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
- if (src[3] == 'l')
+ if (tolower (src[3]) == 'l')
{
*mode = A_MACL;
return 4;
}
- if (src[3] == 'h')
+ if (tolower (src[3]) == 'h')
{
*mode = A_MACH;
return 4;
}
}
- if (src[0] == 'm' && src[1] == 'o' && src[2] == 'd'
+ if (l0 == 'm' && l1 == 'o' && tolower (src[2]) == 'd'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_MOD;
return 3;
}
- if (src[0] == 'f' && src[1] == 'r')
+ if (l0 == 'f' && l1 == 'r')
{
if (src[2] == '1')
{
return 3;
}
}
- if (src[0] == 'd' && src[1] == 'r')
+ if (l0 == 'd' && l1 == 'r')
{
if (src[2] == '1')
{
return 3;
}
}
- if (src[0] == 'x' && src[1] == 'd')
+ if (l0 == 'x' && l1 == 'd')
{
if (src[2] == '1')
{
return 3;
}
}
- if (src[0] == 'f' && src[1] == 'v')
+ if (l0 == 'f' && l1 == 'v')
{
if (src[2] == '1'&& src[3] == '2' && ! IDENT_CHAR ((unsigned char) src[4]))
{
return 3;
}
}
- if (src[0] == 'f' && src[1] == 'p' && src[2] == 'u' && src[3] == 'l'
+ if (l0 == 'f' && l1 == 'p' && tolower (src[2]) == 'u'
+ && tolower (src[3]) == 'l'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = FPUL_N;
return 4;
}
- if (src[0] == 'f' && src[1] == 'p' && src[2] == 's' && src[3] == 'c'
- && src[4] == 'r' && ! IDENT_CHAR ((unsigned char) src[5]))
+ if (l0 == 'f' && l1 == 'p' && tolower (src[2]) == 's'
+ && tolower (src[3]) == 'c'
+ && tolower (src[4]) == 'r' && ! IDENT_CHAR ((unsigned char) src[5]))
{
*mode = FPSCR_N;
return 5;
}
- if (src[0] == 'x' && src[1] == 'm' && src[2] == 't' && src[3] == 'r'
- && src[4] == 'x' && ! IDENT_CHAR ((unsigned char) src[5]))
+ if (l0 == 'x' && l1 == 'm' && tolower (src[2]) == 't'
+ && tolower (src[3]) == 'r'
+ && tolower (src[4]) == 'x' && ! IDENT_CHAR ((unsigned char) src[5]))
{
*mode = XMTRX_M4;
return 5;
return 0;
}
-static symbolS *dot()
+static symbolS *
+dot ()
{
const char *fake;
now_seg,
(valueT) frag_now_fix (),
frag_now);
-
}
-
-static
-char *
-parse_exp (s)
+static char *
+parse_exp (s, op)
char *s;
+ sh_operand_info *op;
{
char *save;
char *new;
save = input_line_pointer;
input_line_pointer = s;
- expression (&immediate);
- if (immediate.X_op == O_absent)
+ expression (&op->immediate);
+ if (op->immediate.X_op == O_absent)
as_bad (_("missing operand"));
new = input_line_pointer;
input_line_pointer = save;
return new;
}
-
/* The many forms of operand:
Rn Register direct
disp:12
#imm8
pr, gbr, vbr, macl, mach
-
*/
-static
-char *
+static char *
parse_at (src, op)
char *src;
sh_operand_info *op;
src++;
if (src[0] == '-')
{
- /* Must be predecrement */
+ /* Must be predecrement. */
src++;
len = parse_reg (src, &mode, &(op->reg));
else
{
/* Must be an @(disp,.. thing) */
- src = parse_exp (src);
+ src = parse_exp (src, op);
if (src[0] == ',')
src++;
/* Now can be rn, gbr or pc */
{
op->type = A_DISP_GBR;
}
- else if (mode == A_DISP_PC)
+ else if (mode == A_PC)
{
- /* Turn a plain @(4,pc) into @(.+4,pc) */
- if (immediate.X_op == O_constant) {
- immediate.X_add_symbol = dot();
- immediate.X_op = O_symbol;
- }
+ /* Turn a plain @(4,pc) into @(.+4,pc). */
+ if (op->immediate.X_op == O_constant)
+ {
+ op->immediate.X_add_symbol = dot();
+ op->immediate.X_op = O_symbol;
+ }
op->type = A_DISP_PC;
}
else
if (src[0] == '#')
{
src++;
- *ptr = parse_exp (src);
+ *ptr = parse_exp (src, op);
op->type = A_IMM;
return;
}
}
else
{
- /* Not a reg, the only thing left is a displacement */
- *ptr = parse_exp (src);
+ /* Not a reg, the only thing left is a displacement. */
+ *ptr = parse_exp (src, op);
op->type = A_DISP_PC;
return;
}
}
-static
-char *
+static char *
get_operands (info, args, operand)
sh_opcode_info *info;
char *args;
sh_operand_info *operand;
-
{
char *ptr = args;
if (info->arg[0])
ptr++;
}
get_operand (&ptr, operand + 1);
- if (info->arg[2])
+ /* ??? Hack: psha/pshl have a varying operand number depending on
+ the type of the first operand. We handle this by having the
+ three-operand version first and reducing the number of operands
+ parsed to two if we see that the first operand is an immediate.
+ This works because no insn with three operands has an immediate
+ as first operand. */
+ if (info->arg[2] && operand[0].type != A_IMM)
{
if (*ptr == ',')
{
/* Passed a pointer to a list of opcodes which use different
addressing modes, return the opcode which matches the opcodes
- provided
- */
+ provided. */
-static
-sh_opcode_info *
+static sh_opcode_info *
get_specific (opcode, operands)
sh_opcode_info *opcode;
sh_operand_info *operands;
sh_opcode_info *this_try = opcode;
char *name = opcode->name;
int n = 0;
+
while (opcode->name)
{
this_try = opcode++;
if (this_try->name != name)
{
/* We've looked so far down the table that we've run out of
- opcodes with the same name */
+ opcodes with the same name. */
return 0;
}
- /* look at both operands needed by the opcodes and provided by
+
+ /* Look at both operands needed by the opcodes and provided by
the user - since an arg test will often fail on the same arg
again and again, we'll try and test the last failing arg the
- first on each opcode try */
-
+ first on each opcode try. */
for (n = 0; this_try->arg[n]; n++)
{
sh_operand_info *user = operands + n;
sh_arg_type arg = this_try->arg[n];
+
switch (arg)
{
case A_IMM:
goto fail;
break;
- case A_REG_B:
+ case A_REG_B:
if (user->type != arg)
goto fail;
reg_b = user->reg;
goto fail;
reg_m = 4;
break;
-
+
default:
printf (_("unhandled %d\n"), arg);
goto fail;
goto fail;
valid_arch &= this_try->arch;
return this_try;
- fail:;
+ fail:
+ ;
}
return 0;
return operand->X_add_number;
}
-
static void
-insert (where, how, pcrel)
+insert (where, how, pcrel, op)
char *where;
int how;
int pcrel;
+ sh_operand_info *op;
{
fix_new_exp (frag_now,
where - frag_now->fr_literal,
2,
- &immediate,
+ &op->immediate,
pcrel,
how);
}
static void
-build_relax (opcode)
+build_relax (opcode, op)
sh_opcode_info *opcode;
+ sh_operand_info *op;
{
int high_byte = target_big_endian ? 0 : 1;
char *p;
md_relax_table[C (what, COND32)].rlx_length,
md_relax_table[C (what, COND8)].rlx_length,
C (what, 0),
- immediate.X_add_symbol,
- immediate.X_add_number,
+ op->immediate.X_add_symbol,
+ op->immediate.X_add_number,
0);
p[high_byte] = (opcode->nibbles[0] << 4) | (opcode->nibbles[1]);
}
md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length,
md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length,
C (UNCOND_JUMP, 0),
- immediate.X_add_symbol,
- immediate.X_add_number,
+ op->immediate.X_add_symbol,
+ op->immediate.X_add_number,
0);
p[high_byte] = (opcode->nibbles[0] << 4);
}
}
-/* Now we know what sort of opcodes it is, lets build the bytes -
- */
-static void
+/* Insert ldrs & ldre with fancy relocations that relaxation can recognize. */
+
+static char *
+insert_loop_bounds (output, operand)
+ char *output;
+ sh_operand_info *operand;
+{
+ char *name;
+ symbolS *end_sym;
+
+ /* Since the low byte of the opcode will be overwritten by the reloc, we
+ can just stash the high byte into both bytes and ignore endianness. */
+ output[0] = 0x8c;
+ output[1] = 0x8c;
+ insert (output, BFD_RELOC_SH_LOOP_START, 1, operand);
+ insert (output, BFD_RELOC_SH_LOOP_END, 1, operand + 1);
+
+ if (sh_relax)
+ {
+ static int count = 0;
+
+ /* If the last loop insn is a two-byte-insn, it is in danger of being
+ swapped with the insn after it. To prevent this, create a new
+ symbol - complete with SH_LABEL reloc - after the last loop insn.
+ If the last loop insn is four bytes long, the symbol will be
+ right in the middle, but four byte insns are not swapped anyways. */
+ /* A REPEAT takes 6 bytes. The SH has a 32 bit address space.
+ Hence a 9 digit number should be enough to count all REPEATs. */
+ name = alloca (11);
+ sprintf (name, "_R%x", count++ & 0x3fffffff);
+ end_sym = symbol_new (name, undefined_section, 0, &zero_address_frag);
+ /* Make this a local symbol. */
+#ifdef OBJ_COFF
+ SF_SET_LOCAL (end_sym);
+#endif /* OBJ_COFF */
+ symbol_table_insert (end_sym);
+ end_sym->sy_value = operand[1].immediate;
+ end_sym->sy_value.X_add_number += 2;
+ fix_new (frag_now, frag_now_fix (), 2, end_sym, 0, 1, BFD_RELOC_SH_LABEL);
+ }
+
+ output = frag_more (2);
+ output[0] = 0x8e;
+ output[1] = 0x8e;
+ insert (output, BFD_RELOC_SH_LOOP_START, 1, operand);
+ insert (output, BFD_RELOC_SH_LOOP_END, 1, operand + 1);
+
+ return frag_more (2);
+}
+
+/* Now we know what sort of opcodes it is, let's build the bytes. */
+
+static unsigned int
build_Mytes (opcode, operand)
sh_opcode_info *opcode;
sh_operand_info *operand;
int index;
char nbuf[4];
char *output = frag_more (2);
+ unsigned int size = 2;
int low_byte = target_big_endian ? 1 : 0;
nbuf[0] = 0;
nbuf[1] = 0;
case REG_NM:
nbuf[index] = reg_n | (reg_m >> 2);
break;
- case REG_B:
+ case REG_B:
nbuf[index] = reg_b | 0x08;
break;
- case DISP_4:
- insert (output + low_byte, BFD_RELOC_SH_IMM4, 0);
+ case IMM0_4BY4:
+ insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0, operand);
+ break;
+ case IMM0_4BY2:
+ insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0, operand);
+ break;
+ case IMM0_4:
+ insert (output + low_byte, BFD_RELOC_SH_IMM4, 0, operand);
+ break;
+ case IMM1_4BY4:
+ insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0, operand + 1);
+ break;
+ case IMM1_4BY2:
+ insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0, operand + 1);
break;
- case IMM_4BY4:
- insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0);
+ case IMM1_4:
+ insert (output + low_byte, BFD_RELOC_SH_IMM4, 0, operand + 1);
break;
- case IMM_4BY2:
- insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0);
+ case IMM0_8BY4:
+ insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0, operand);
break;
- case IMM_4:
- insert (output + low_byte, BFD_RELOC_SH_IMM4, 0);
+ case IMM0_8BY2:
+ insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0, operand);
break;
- case IMM_8BY4:
- insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0);
+ case IMM0_8:
+ insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand);
break;
- case IMM_8BY2:
- insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0);
+ case IMM1_8BY4:
+ insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0, operand + 1);
break;
- case IMM_8:
- insert (output + low_byte, BFD_RELOC_SH_IMM8, 0);
+ case IMM1_8BY2:
+ insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0, operand + 1);
+ break;
+ case IMM1_8:
+ insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand + 1);
break;
case PCRELIMM_8BY4:
- insert (output, BFD_RELOC_SH_PCRELIMM8BY4, 1);
+ insert (output, BFD_RELOC_SH_PCRELIMM8BY4, 1, operand);
break;
case PCRELIMM_8BY2:
- insert (output, BFD_RELOC_SH_PCRELIMM8BY2, 1);
+ insert (output, BFD_RELOC_SH_PCRELIMM8BY2, 1, operand);
+ break;
+ case REPEAT:
+ output = insert_loop_bounds (output, operand);
+ nbuf[index] = opcode->nibbles[3];
+ operand += 2;
break;
default:
printf (_("failed for %d\n"), i);
}
}
}
- if (! target_big_endian) {
- output[1] = (nbuf[0] << 4) | (nbuf[1]);
- output[0] = (nbuf[2] << 4) | (nbuf[3]);
- }
- else {
- output[0] = (nbuf[0] << 4) | (nbuf[1]);
- output[1] = (nbuf[2] << 4) | (nbuf[3]);
- }
+ if (!target_big_endian)
+ {
+ output[1] = (nbuf[0] << 4) | (nbuf[1]);
+ output[0] = (nbuf[2] << 4) | (nbuf[3]);
+ }
+ else
+ {
+ output[0] = (nbuf[0] << 4) | (nbuf[1]);
+ output[1] = (nbuf[2] << 4) | (nbuf[3]);
+ }
+ return size;
}
/* Find an opcode at the start of *STR_P in the hash table, and set
unsigned char *op_end;
char name[20];
int nlen = 0;
- /* Drop leading whitespace */
+
+ /* Drop leading whitespace. */
while (*str == ' ')
str++;
name[nlen] = c;
nlen++;
}
+
name[nlen] = 0;
*str_p = op_end;
if (nlen == 0)
- {
- as_bad (_("can't find opcode "));
- }
+ as_bad (_("can't find opcode "));
return (sh_opcode_info *) hash_find (opcode_hash_control, name);
}
/* Assemble a parallel processing insn. */
#define DDT_BASE 0xf000 /* Base value for double data transfer insns */
-static void
+
+static unsigned int
assemble_ppi (op_end, opcode)
char *op_end;
sh_opcode_info *opcode;
int field_b = 0;
char *output;
int move_code;
+ unsigned int size;
/* Some insn ignore one or more register fields, e.g. psts machl,a0.
Make sure we encode a defined insn pattern. */
opcode = get_specific (opcode, operand);
if (opcode == 0)
{
- /* Couldn't find an opcode which matched the operands */
+ /* Couldn't find an opcode which matched the operands. */
char *where = frag_more (2);
+ size = 2;
where[0] = 0x0;
where[1] = 0x0;
as_bad (_("invalid operands for opcode"));
- return;
+ return size;
}
+
if (opcode->nibbles[0] != PPI)
as_bad (_("insn can't be combined with parallel processing insn"));
break;
case PSH:
- if (immediate.X_op != O_constant)
+ if (operand[0].immediate.X_op != O_constant)
as_bad (_("dsp immediate shift value not constant"));
field_b = ((opcode->nibbles[2] << 12)
- | (immediate.X_add_number & 127) << 4
+ | (operand[0].immediate.X_add_number & 127) << 4
| reg_n);
break;
case PPI3:
unsigned long ppi_code = (movx | movy | 0xf800) << 16 | field_b;
output = frag_more (4);
+ size = 4;
if (! target_big_endian)
{
output[3] = ppi_code >> 8;
move_code |= 0xf800;
}
else
- /* Just a double data transfer. */
- output = frag_more (2);
+ {
+ /* Just a double data transfer. */
+ output = frag_more (2);
+ size = 2;
+ }
if (! target_big_endian)
{
output[1] = move_code >> 8;
output[0] = move_code >> 8;
output[1] = move_code;
}
+ return size;
}
/* This is the guts of the machine-dependent assembler. STR points to a
machine dependent instruction. This function is supposed to emit
- the frags/bytes it assembles to.
- */
+ the frags/bytes it assembles to. */
void
md_assemble (str)
unsigned char *op_end;
sh_operand_info operand[3];
sh_opcode_info *opcode;
+ unsigned int size = 0;
opcode = find_cooked_opcode (&str);
op_end = str;
if (opcode->nibbles[0] == PPI)
{
- assemble_ppi (op_end, opcode);
- return;
- }
-
- if (opcode->arg[0] == A_BDISP12
- || opcode->arg[0] == A_BDISP8)
- {
- parse_exp (op_end + 1);
- build_relax (opcode);
+ size = assemble_ppi (op_end, opcode);
}
else
{
- if (opcode->arg[0] == A_END)
+ if (opcode->arg[0] == A_BDISP12
+ || opcode->arg[0] == A_BDISP8)
{
- /* Ignore trailing whitespace. If there is any, it has already
- been compressed to a single space. */
- if (*op_end == ' ')
- op_end++;
+ parse_exp (op_end + 1, &operand[0]);
+ build_relax (opcode, &operand[0]);
}
else
{
- op_end = get_operands (opcode, op_end, operand);
- }
- opcode = get_specific (opcode, operand);
-
- if (opcode == 0)
- {
- /* Couldn't find an opcode which matched the operands */
- char *where = frag_more (2);
+ if (opcode->arg[0] == A_END)
+ {
+ /* Ignore trailing whitespace. If there is any, it has already
+ been compressed to a single space. */
+ if (*op_end == ' ')
+ op_end++;
+ }
+ else
+ {
+ op_end = get_operands (opcode, op_end, operand);
+ }
+ opcode = get_specific (opcode, operand);
- where[0] = 0x0;
- where[1] = 0x0;
- as_bad (_("invalid operands for opcode"));
- return;
- }
+ if (opcode == 0)
+ {
+ /* Couldn't find an opcode which matched the operands. */
+ char *where = frag_more (2);
+ size = 2;
- if (*op_end)
- as_bad (_("excess operands: '%s'"), op_end);
+ where[0] = 0x0;
+ where[1] = 0x0;
+ as_bad (_("invalid operands for opcode"));
+ }
+ else
+ {
+ if (*op_end)
+ as_bad (_("excess operands: '%s'"), op_end);
- build_Mytes (opcode, operand);
+ size = build_Mytes (opcode, operand);
+ }
+ }
}
+#ifdef BFD_ASSEMBLER
+ dwarf2_emit_insn (size);
+#endif
}
/* This routine is called each time a label definition is seen. It
offset = frag_now_fix ();
if (frag_now != last_label_frag
|| offset != last_label_offset)
- {
+ {
fix_new (frag_now, offset, 2, &abs_symbol, 0, 0, BFD_RELOC_SH_LABEL);
last_label_frag = frag_now;
last_label_offset = offset;
}
symbolS *
-DEFUN (md_undefined_symbol, (name),
- char *name)
+md_undefined_symbol (name)
+ char *name;
{
+#ifdef OBJ_ELF
+ /* Under ELF we need to default _GLOBAL_OFFSET_TABLE. Otherwise we
+ have no need to default values of symbols. */
+ if (strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0)
+ {
+ if (!GOT_symbol)
+ {
+ if (symbol_find (name))
+ as_bad ("GOT already in the symbol table");
+
+ GOT_symbol = symbol_new (name, undefined_section,
+ (valueT)0, & zero_address_frag);
+ }
+
+ return GOT_symbol;
+ }
+#endif /* OBJ_ELF */
+
return 0;
}
#ifndef BFD_ASSEMBLER
void
-DEFUN (tc_crawl_symbol_chain, (headers),
- object_headers * headers)
+tc_crawl_symbol_chain (headers)
+ object_headers *headers;
{
printf (_("call to tc_crawl_symbol_chain \n"));
}
void
-DEFUN (tc_headers_hook, (headers),
- object_headers * headers)
+tc_headers_hook (headers)
+ object_headers *headers;
{
printf (_("call to tc_headers_hook \n"));
}
#endif
#endif
-/* Various routines to kill one day */
-/* Equal to MAX_PRECISION in atof-ieee.c */
+/* Various routines to kill one day. */
+/* Equal to MAX_PRECISION in atof-ieee.c. */
#define MAX_LITTLENUMS 6
-/* Turn a string in input_line_pointer into a floating point constant of type
- type, and store the appropriate bytes in *litP. The number of LITTLENUMS
- emitted is stored in *sizeP . An error message is returned, or NULL on OK.
- */
+/* Turn a string in input_line_pointer into a floating point constant
+ of type TYPE, and store the appropriate bytes in *LITP. The number
+ of LITTLENUMS emitted is stored in *SIZEP . An error message is
+ returned, or NULL on OK. */
+
char *
md_atof (type, litP, sizeP)
int type;
litP += 2;
}
}
-
+
return NULL;
}
static void
s_uses (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
expressionS ex;
}
\f
CONST char *md_shortopts = "";
-struct option md_longopts[] = {
-
+struct option md_longopts[] =
+{
#define OPTION_RELAX (OPTION_MD_BASE)
#define OPTION_LITTLE (OPTION_MD_BASE + 1)
#define OPTION_SMALL (OPTION_LITTLE + 1)
{"dsp", no_argument, NULL, OPTION_DSP},
{NULL, no_argument, NULL, 0}
};
-size_t md_longopts_size = sizeof(md_longopts);
+size_t md_longopts_size = sizeof (md_longopts);
int
md_parse_option (c, arg)
int c;
- char *arg;
+ char *arg ATTRIBUTE_UNUSED;
{
switch (c)
{
md_show_usage (stream)
FILE *stream;
{
- fprintf(stream, _("\
+ fprintf (stream, _("\
SH options:\n\
-little generate little endian code\n\
-relax alter jump instructions for long displacements\n\
--small align sections to 4 byte boundaries, not 16\n
+-small align sections to 4 byte boundaries, not 16\n\
-dsp enable sh-dsp insns, and disable sh3e / sh4 insns.\n"));
}
\f
symbol. When using BFD_ASSEMBLER, this is called via
bfd_map_over_sections. */
-/*ARGSUSED*/
static void
sh_count_relocs (abfd, sec, data)
- bfd *abfd;
+ bfd *abfd ATTRIBUTE_UNUSED;
segT sec;
PTR data;
{
/* Handle the count relocs for a particular section. When using
BFD_ASSEMBLER, this is called via bfd_map_over_sections. */
-/*ARGSUSED*/
static void
sh_frob_section (abfd, sec, ignore)
- bfd *abfd;
+ bfd *abfd ATTRIBUTE_UNUSED;
segT sec;
- PTR ignore;
+ PTR ignore ATTRIBUTE_UNUSED;
{
segment_info_type *seginfo;
fixS *fix;
continue;
}
- /* fscan should also be a fixup to a local symbol in the same
- section. */
+ /* The variable fscan should also be a fixup to a local symbol
+ in the same section. */
sym = fscan->fx_addsy;
if (sym == NULL
|| fscan->fx_subsy != NULL
We have already adjusted the value of sym to include the
fragment address, so we undo that adjustment here. */
subseg_change (sec, 0);
- fix_new (symbol_get_frag (sym),
- S_GET_VALUE (sym) - symbol_get_frag (sym)->fr_address,
+ fix_new (fscan->fx_frag,
+ S_GET_VALUE (sym) - fscan->fx_frag->fr_address,
4, &abs_symbol, info.count, 0, BFD_RELOC_SH_COUNT);
}
}
void
md_convert_frag (headers, seg, fragP)
#ifdef BFD_ASSEMBLER
- bfd *headers;
+ bfd *headers ATTRIBUTE_UNUSED;
#else
object_headers *headers;
#endif
case C (UNCOND_JUMP, UNCOND32):
case C (UNCOND_JUMP, UNDEF_WORD_DISP):
if (fragP->fr_symbol == NULL)
- as_bad (_("at 0x%lx, displacement overflows 12-bit field"),
- (unsigned long) fragP->fr_address);
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("displacement overflows 12-bit field"));
else if (S_IS_DEFINED (fragP->fr_symbol))
- as_bad (_("at 0x%lx, displacement to defined symbol %s overflows 12-bit field"),
- (unsigned long) fragP->fr_address,
- S_GET_NAME (fragP->fr_symbol));
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("displacement to defined symbol %s overflows 12-bit field"),
+ S_GET_NAME (fragP->fr_symbol));
else
- as_bad (_("at 0x%lx, displacement to undefined symbol %s overflows 12-bit field"),
- (unsigned long) fragP->fr_address,
- S_GET_NAME (fragP->fr_symbol));
-
-#if 0 /* This code works, but generates poor code and the compiler
- should never produce a sequence that requires it to be used. */
-
- /* A jump wont fit in 12 bits, make code which looks like
- bra foo
- mov.w @(0, PC), r14
- .long disp
- foo: bra @r14
- */
- int t = buffer[0] & 0x10;
-
- buffer[highbyte] = 0xa0; /* branch over move and disp */
- buffer[lowbyte] = 3;
- buffer[highbyte+2] = 0xd0 | JREG; /* Build mov insn */
- buffer[lowbyte+2] = 0x00;
-
- buffer[highbyte+4] = 0; /* space for 32 bit jump disp */
- buffer[lowbyte+4] = 0;
- buffer[highbyte+6] = 0;
- buffer[lowbyte+6] = 0;
-
- buffer[highbyte+8] = 0x40 | JREG; /* Build jmp @JREG */
- buffer[lowbyte+8] = t ? 0xb : 0x2b;
-
- buffer[highbyte+10] = 0x20; /* build nop */
- buffer[lowbyte+10] = 0x0b;
-
- /* Make reloc for the long disp */
- fix_new (fragP,
- fragP->fr_fix + 4,
- 4,
- fragP->fr_symbol,
- fragP->fr_offset,
- 0,
- BFD_RELOC_32);
- fragP->fr_fix += UNCOND32_LENGTH;
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("displacement to undefined symbol %s overflows 12-bit field"),
+ S_GET_NAME (fragP->fr_symbol));
+ /* Stabilize this frag, so we don't trip an assert. */
+ fragP->fr_fix += fragP->fr_var;
fragP->fr_var = 0;
- donerelax = 1;
-#endif
-
break;
case C (COND_JUMP, COND12):
case C (COND_JUMP_DELAY, COND12):
- /* A bcond won't fit, so turn it into a b!cond; bra disp; nop */
+ /* A bcond won't fit, so turn it into a b!cond; bra disp; nop. */
/* I found that a relax failure for gcc.c-torture/execute/930628-1.c
was due to gas incorrectly relaxing an out-of-range conditional
branch with delay slot. It turned:
bf.s L6 (slot mov.l r12,@(44,r0))
into:
-
+
2c: 8f 01 a0 8b bf.s 32 <_main+32> (slot bra L6)
30: 00 09 nop
32: 10 cb mov.l r12,@(44,r0)
case C (COND_JUMP, UNDEF_WORD_DISP):
case C (COND_JUMP_DELAY, UNDEF_WORD_DISP):
if (fragP->fr_symbol == NULL)
- as_bad (_("at 0x%lx, displacement overflows 8-bit field"),
- (unsigned long) fragP->fr_address);
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("displacement overflows 8-bit field"));
else if (S_IS_DEFINED (fragP->fr_symbol))
- as_bad (_("at 0x%lx, displacement to defined symbol %s overflows 8-bit field "),
- (unsigned long) fragP->fr_address,
- S_GET_NAME (fragP->fr_symbol));
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("displacement to defined symbol %s overflows 8-bit field"),
+ S_GET_NAME (fragP->fr_symbol));
else
- as_bad (_("at 0x%lx, displacement to undefined symbol %s overflows 8-bit field "),
- (unsigned long) fragP->fr_address,
- S_GET_NAME (fragP->fr_symbol));
-
-#if 0 /* This code works, but generates poor code, and the compiler
- should never produce a sequence that requires it to be used. */
-
- /* A bcond won't fit and it won't go into a 12 bit
- displacement either, the code sequence looks like:
- b!cond foop
- mov.w @(n, PC), r14
- jmp @r14
- nop
- .long where
- foop:
- */
-
- buffer[0] ^= 0x2; /* Toggle T/F bit */
-#define JREG 14
- buffer[1] = 5; /* branch over mov, jump, nop and ptr */
- buffer[2] = 0xd0 | JREG; /* Build mov insn */
- buffer[3] = 0x2;
- buffer[4] = 0x40 | JREG; /* Build jmp @JREG */
- buffer[5] = 0x0b;
- buffer[6] = 0x20; /* build nop */
- buffer[7] = 0x0b;
- buffer[8] = 0; /* space for 32 bit jump disp */
- buffer[9] = 0;
- buffer[10] = 0;
- buffer[11] = 0;
- buffer[12] = 0;
- buffer[13] = 0;
- /* Make reloc for the long disp */
- fix_new (fragP,
- fragP->fr_fix + 8,
- 4,
- fragP->fr_symbol,
- fragP->fr_offset,
- 0,
- BFD_RELOC_32);
- fragP->fr_fix += COND32_LENGTH;
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("displacement to undefined symbol %s overflows 8-bit field "),
+ S_GET_NAME (fragP->fr_symbol));
+ /* Stabilize this frag, so we don't trip an assert. */
+ fragP->fr_fix += fragP->fr_var;
fragP->fr_var = 0;
- donerelax = 1;
-#endif
-
break;
default:
}
valueT
-DEFUN (md_section_align, (seg, size),
- segT seg AND
- valueT size)
+md_section_align (seg, size)
+ segT seg ATTRIBUTE_UNUSED;
+ valueT size;
{
#ifdef BFD_ASSEMBLER
#ifdef OBJ_ELF
return;
}
- p = frag_var (rs_align_code, 1, 1, (relax_substateT) 0,
+ p = frag_var (rs_align_test, 1, 1, (relax_substateT) 0,
(symbolS *) NULL, (offsetT) nalign, (char *) NULL);
record_alignment (now_seg, nalign);
sh_handle_align (frag)
fragS *frag;
{
+ int bytes = frag->fr_next->fr_address - frag->fr_address - frag->fr_fix;
+
+ if (frag->fr_type == rs_align_code)
+ {
+ static const unsigned char big_nop_pattern[] = { 0x00, 0x09 };
+ static const unsigned char little_nop_pattern[] = { 0x09, 0x00 };
+
+ char *p = frag->fr_literal + frag->fr_fix;
+
+ if (bytes & 1)
+ {
+ *p++ = 0;
+ bytes--;
+ frag->fr_fix += 1;
+ }
+
+ if (target_big_endian)
+ {
+ memcpy (p, big_nop_pattern, sizeof big_nop_pattern);
+ frag->fr_var = sizeof big_nop_pattern;
+ }
+ else
+ {
+ memcpy (p, little_nop_pattern, sizeof little_nop_pattern);
+ frag->fr_var = sizeof little_nop_pattern;
+ }
+ }
+ else if (frag->fr_type == rs_align_test)
+ {
+ if (bytes != 0)
+ as_warn_where (frag->fr_file, frag->fr_line, _("misaligned data"));
+ }
+
if (sh_relax
- && frag->fr_type == rs_align
+ && (frag->fr_type == rs_align
+ || frag->fr_type == rs_align_code)
&& frag->fr_address + frag->fr_fix > 0
&& frag->fr_offset > 1
&& now_seg != bss_section)
fix_new (frag, frag->fr_fix, 2, &abs_symbol, frag->fr_offset, 0,
BFD_RELOC_SH_ALIGN);
-
- if (frag->fr_type == rs_align_code
- && frag->fr_next->fr_address - frag->fr_address - frag->fr_fix != 0)
- as_warn_where (frag->fr_file, frag->fr_line, _("misaligned data"));
}
/* This macro decides whether a particular reloc is an entry in a
{
if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT
- || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY
+ || fix->fx_r_type == BFD_RELOC_SH_LOOP_START
+ || fix->fx_r_type == BFD_RELOC_SH_LOOP_END)
return 1;
if (! sh_relax)
if (fixP->fx_addsy == NULL)
return 1;
-
+
+ if (fixP->fx_r_type == BFD_RELOC_SH_PCDISP8BY2
+ || fixP->fx_r_type == BFD_RELOC_SH_PCDISP12BY2
+ || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY2
+ || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY4
+ || fixP->fx_r_type == BFD_RELOC_8_PCREL
+ || fixP->fx_r_type == BFD_RELOC_SH_SWITCH16
+ || fixP->fx_r_type == BFD_RELOC_SH_SWITCH32)
+ return 1;
+
+ if (! TC_RELOC_RTSYM_LOC_FIXUP (fixP)
+ || fixP->fx_r_type == BFD_RELOC_32_GOTOFF
+ || fixP->fx_r_type == BFD_RELOC_RVA)
+ return 0;
+
/* We need the symbol name for the VTABLE entries */
if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 1;
}
-void sh_elf_final_processing()
+void
+sh_elf_final_processing ()
{
int val;
int shift;
#ifdef BFD_ASSEMBLER
- /* adjust_reloc_syms won't convert a reloc against a weak symbol
- into a reloc against a section, but bfd_install_relocation will
- screw up if the symbol is defined, so we have to adjust val here
- to avoid the screw up later. */
- if (fixP->fx_addsy != NULL
+ /* A difference between two symbols, the second of which is in the
+ current section, is transformed in a PC-relative relocation to
+ the other symbol. We have to adjust the relocation type here. */
+ if (fixP->fx_pcrel)
+ {
+ switch (fixP->fx_r_type)
+ {
+ default:
+ break;
+
+ case BFD_RELOC_32:
+ fixP->fx_r_type = BFD_RELOC_32_PCREL;
+ break;
+
+ /* Currently, we only support 32-bit PCREL relocations.
+ We'd need a new reloc type to handle 16_PCREL, and
+ 8_PCREL is already taken for R_SH_SWITCH8, which
+ apparently does something completely different than what
+ we need. FIXME. */
+ case BFD_RELOC_16:
+ bfd_set_error (bfd_error_bad_value);
+ return false;
+
+ case BFD_RELOC_8:
+ bfd_set_error (bfd_error_bad_value);
+ return false;
+ }
+ }
+
+ /* The function adjust_reloc_syms won't convert a reloc against a weak
+ symbol into a reloc against a section, but bfd_install_relocation
+ will screw up if the symbol is defined, so we have to adjust val here
+ to avoid the screw up later.
+
+ For ordinary relocs, this does not happen for ELF, since for ELF,
+ bfd_install_relocation uses the "special function" field of the
+ howto, and does not execute the code that needs to be undone, as long
+ as the special function does not return bfd_reloc_continue.
+ It can happen for GOT- and PLT-type relocs the way they are
+ described in elf32-sh.c as they use bfd_elf_generic_reloc, but it
+ doesn't matter here since those relocs don't use VAL; see below. */
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour
+ && fixP->fx_addsy != NULL
&& S_IS_WEAK (fixP->fx_addsy))
val -= S_GET_VALUE (fixP->fx_addsy);
#endif
Note that adding further restrictions may invalidate
reasonable looking assembly code, such as ``and -0x1,r0''. */
max = 0xff;
- min = - 0xff;
+ min = -0xff;
*buf++ = val;
break;
case BFD_RELOC_SH_PCDISP12BY2:
val /= 2;
- if (val < -0x800 || val >= 0x7ff)
+ if (val < -0x800 || val > 0x7ff)
as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far"));
buf[lowbyte] = val & 0xff;
buf[highbyte] |= (val >> 8) & 0xf;
break;
case BFD_RELOC_32:
- if (! target_big_endian)
- {
- *buf++ = val >> 0;
- *buf++ = val >> 8;
- *buf++ = val >> 16;
- *buf++ = val >> 24;
- }
- else
- {
- *buf++ = val >> 24;
- *buf++ = val >> 16;
- *buf++ = val >> 8;
- *buf++ = val >> 0;
- }
+ case BFD_RELOC_32_PCREL:
+ md_number_to_chars (buf, val, 4);
break;
case BFD_RELOC_16:
- if (! target_big_endian)
- {
- *buf++ = val >> 0;
- *buf++ = val >> 8;
- }
- else
- {
- *buf++ = val >> 8;
- *buf++ = val >> 0;
- }
+ md_number_to_chars (buf, val, 2);
break;
case BFD_RELOC_SH_USES:
/* Nothing to do here. */
break;
+ case BFD_RELOC_SH_LOOP_START:
+ case BFD_RELOC_SH_LOOP_END:
+
case BFD_RELOC_VTABLE_INHERIT:
case BFD_RELOC_VTABLE_ENTRY:
fixP->fx_done = 0;
return;
#endif
+#ifdef OBJ_ELF
+ case BFD_RELOC_32_PLT_PCREL:
+ /* Make the jump instruction point to the address of the operand. At
+ runtime we merely add the offset to the actual PLT entry. */
+ *valp = 0xfffffffc;
+ break;
+
+ case BFD_RELOC_SH_GOTPC:
+ /* This is tough to explain. We end up with this one if we have
+ operands that look like "_GLOBAL_OFFSET_TABLE_+[.-.L284]".
+ The goal here is to obtain the absolute address of the GOT,
+ and it is strongly preferable from a performance point of
+ view to avoid using a runtime relocation for this. There are
+ cases where you have something like:
+
+ .long _GLOBAL_OFFSET_TABLE_+[.-.L66]
+
+ and here no correction would be required. Internally in the
+ assembler we treat operands of this form as not being pcrel
+ since the '.' is explicitly mentioned, and I wonder whether
+ it would simplify matters to do it this way. Who knows. In
+ earlier versions of the PIC patches, the pcrel_adjust field
+ was used to store the correction, but since the expression is
+ not pcrel, I felt it would be confusing to do it this way. */
+ *valp -= 1;
+ md_number_to_chars (buf, val, 4);
+ break;
+
+ case BFD_RELOC_32_GOT_PCREL:
+ *valp = 0; /* Fully resolved at runtime. No addend. */
+ md_number_to_chars (buf, 0, 4);
+ break;
+
+ case BFD_RELOC_32_GOTOFF:
+ break;
+#endif
+
default:
abort ();
}
register fragS *fragP;
register segT segment_type;
{
+ int what;
+
switch (fragP->fr_subtype)
{
+ default:
+ abort ();
+
case C (UNCOND_JUMP, UNDEF_DISP):
- /* used to be a branch to somewhere which was unknown */
+ /* Used to be a branch to somewhere which was unknown. */
if (!fragP->fr_symbol)
{
fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12);
- fragP->fr_var = md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length;
}
else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
{
fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12);
- fragP->fr_var = md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length;
}
else
{
fragP->fr_subtype = C (UNCOND_JUMP, UNDEF_WORD_DISP);
- fragP->fr_var = md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length;
- return md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length;
}
break;
- default:
- abort ();
case C (COND_JUMP, UNDEF_DISP):
case C (COND_JUMP_DELAY, UNDEF_DISP):
- /* used to be a branch to somewhere which was unknown */
+ what = GET_WHAT (fragP->fr_subtype);
+ /* Used to be a branch to somewhere which was unknown. */
if (fragP->fr_symbol
&& S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
{
- int what = GET_WHAT (fragP->fr_subtype);
/* Got a symbol and it's defined in this segment, become byte
- sized - maybe it will fix up */
+ sized - maybe it will fix up. */
fragP->fr_subtype = C (what, COND8);
- fragP->fr_var = md_relax_table[C (what, COND8)].rlx_length;
}
else if (fragP->fr_symbol)
{
- int what = GET_WHAT (fragP->fr_subtype);
- /* Its got a segment, but its not ours, so it will always be long */
+ /* Its got a segment, but its not ours, so it will always be long. */
fragP->fr_subtype = C (what, UNDEF_WORD_DISP);
- fragP->fr_var = md_relax_table[C (what, COND32)].rlx_length;
- return md_relax_table[C (what, COND32)].rlx_length;
}
else
{
- int what = GET_WHAT (fragP->fr_subtype);
- /* We know the abs value */
+ /* We know the abs value. */
fragP->fr_subtype = C (what, COND8);
- fragP->fr_var = md_relax_table[C (what, COND8)].rlx_length;
}
+ break;
+ case C (UNCOND_JUMP, UNCOND12):
+ case C (UNCOND_JUMP, UNCOND32):
+ case C (UNCOND_JUMP, UNDEF_WORD_DISP):
+ case C (COND_JUMP, COND8):
+ case C (COND_JUMP, COND12):
+ case C (COND_JUMP, COND32):
+ case C (COND_JUMP, UNDEF_WORD_DISP):
+ case C (COND_JUMP_DELAY, COND8):
+ case C (COND_JUMP_DELAY, COND12):
+ case C (COND_JUMP_DELAY, COND32):
+ case C (COND_JUMP_DELAY, UNDEF_WORD_DISP):
+ /* When relaxing a section for the second time, we don't need to
+ do anything besides return the current size. */
break;
}
+
+ fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length;
return fragP->fr_var;
}
-/* Put number into target byte order */
+/* Put number into target byte order. */
void
md_number_to_chars (ptr, use, nbytes)
#endif /* OBJ_COFF */
-/* When we align the .text section, insert the correct NOP pattern. */
-
-int
-sh_do_align (n, fill, len, max)
- int n;
- const char *fill;
- int len;
- int max;
-{
- if (fill == NULL
- && subseg_text_p (now_seg)
- && n > 1)
- {
- static const unsigned char big_nop_pattern[] = { 0x00, 0x09 };
- static const unsigned char little_nop_pattern[] = { 0x09, 0x00 };
-
- /* First align to a 2 byte boundary, in case there is an odd
- .byte. */
- frag_align (1, 0, 0);
- if (target_big_endian)
- frag_align_pattern (n, big_nop_pattern, sizeof big_nop_pattern, max);
- else
- frag_align_pattern (n, little_nop_pattern, sizeof little_nop_pattern,
- max);
- return 1;
- }
-
- return 0;
-}
-
#ifndef BFD_ASSEMBLER
#ifdef OBJ_COFF
arelent *
tc_gen_reloc (section, fixp)
- asection *section;
+ asection *section ATTRIBUTE_UNUSED;
fixS *fixp;
{
arelent *rel;
else if (r_type == BFD_RELOC_VTABLE_INHERIT
|| r_type == BFD_RELOC_VTABLE_ENTRY)
rel->addend = fixp->fx_offset;
+ else if (r_type == BFD_RELOC_SH_LOOP_START
+ || r_type == BFD_RELOC_SH_LOOP_END)
+ rel->addend = fixp->fx_offset;
+ else if (r_type == BFD_RELOC_SH_LABEL && fixp->fx_pcrel)
+ {
+ rel->addend = 0;
+ rel->address = rel->addend = fixp->fx_offset;
+ }
else if (fixp->fx_pcrel)
rel->addend = fixp->fx_addnumber;
+ else if (r_type == BFD_RELOC_32 || r_type == BFD_RELOC_32_GOTOFF)
+ rel->addend = fixp->fx_addnumber;
else
rel->addend = 0;