/* tc-tic4x.c -- Assemble for the Texas Instruments TMS320C[34]x.
- Copyright (C) 1997,1998, 2002, 2003, 2005, 2006, 2007
- Free Software Foundation. Inc.
+ Copyright (C) 1997-2015 Free Software Foundation, Inc.
Contributed by Michael P. Hayes (m.hayes@elec.canterbury.ac.nz)
o .align cannot handle fill-data-width larger than 0xFF/8-bits. It
should be possible to define a 32-bits pattern.
- o .align fills all section with NOP's when used regardless if has
- been used in .text or .data. (However the .align is primarily
- intended used in .text sections. If you require something else,
- use .align <size>,0x00)
-
o .align: Implement a 'bu' insn if the number of nop's exceeds 4
within the align frag. if(fragsize>4words) insert bu fragend+1
first.
o Evaluation of constant floating point expressions (expr.c needs
work!)
- o Support 'abc' constants (that is 0x616263)
-*/
+ o Support 'abc' constants (that is 0x616263). */
-#include "safe-ctype.h"
#include "as.h"
+#include "safe-ctype.h"
#include "opcode/tic4x.h"
#include "subsegs.h"
-#include "obstack.h"
/* OK, we accept a syntax similar to the other well known C30
assembly tools. With TIC4X_ALT_SYNTAX defined we are more
#define OPTION_ENHANCED (OPTION_MD_BASE + 7)
#define OPTION_REV (OPTION_MD_BASE + 8)
-CONST char *md_shortopts = "bm:prs";
+const char *md_shortopts = "bm:prs";
struct option md_longopts[] =
{
{ "mcpu", required_argument, NULL, OPTION_CPU },
static tic4x_insn_t the_insn; /* Info about our instruction. */
static tic4x_insn_t *insn = &the_insn;
-static int tic4x_gen_to_words
- PARAMS ((FLONUM_TYPE, LITTLENUM_TYPE *, int ));
-static char *tic4x_atof
- PARAMS ((char *, char, LITTLENUM_TYPE * ));
-static void tic4x_insert_reg
- PARAMS ((char *, int ));
-static void tic4x_insert_sym
- PARAMS ((char *, int ));
-static char *tic4x_expression
- PARAMS ((char *, expressionS *));
-static char *tic4x_expression_abs
- PARAMS ((char *, offsetT *));
-static void tic4x_emit_char
- PARAMS ((char, int));
-static void tic4x_seg_alloc
- PARAMS ((char *, segT, int, symbolS *));
-static void tic4x_asg
- PARAMS ((int));
-static void tic4x_bss
- PARAMS ((int));
-static void tic4x_globl
- PARAMS ((int));
-static void tic4x_cons
- PARAMS ((int));
-static void tic4x_stringer
- PARAMS ((int));
-static void tic4x_eval
- PARAMS ((int));
-static void tic4x_newblock
- PARAMS ((int));
-static void tic4x_sect
- PARAMS ((int));
-static void tic4x_set
- PARAMS ((int));
-static void tic4x_usect
- PARAMS ((int));
-static void tic4x_version
- PARAMS ((int));
-static void tic4x_init_regtable
- PARAMS ((void));
-static void tic4x_init_symbols
- PARAMS ((void));
-static int tic4x_inst_insert
- PARAMS ((tic4x_inst_t *));
-static tic4x_inst_t *tic4x_inst_make
- PARAMS ((char *, unsigned long, char *));
-static int tic4x_inst_add
- PARAMS ((tic4x_inst_t *));
-void tic4x_end
- PARAMS ((void));
-static int tic4x_indirect_parse
- PARAMS ((tic4x_operand_t *, const tic4x_indirect_t *));
-static char *tic4x_operand_parse
- PARAMS ((char *, tic4x_operand_t *));
-static int tic4x_operands_match
- PARAMS ((tic4x_inst_t *, tic4x_insn_t *, int));
-static void tic4x_insn_check
- PARAMS ((tic4x_insn_t *));
-static void tic4x_insn_output
- PARAMS ((tic4x_insn_t *));
-static int tic4x_operands_parse
- PARAMS ((char *, tic4x_operand_t *, int ));
-void tic4x_cleanup
- PARAMS ((void));
-int tic4x_unrecognized_line
- PARAMS ((int));
-static int tic4x_pc_offset
- PARAMS ((unsigned int));
-int tic4x_do_align
- PARAMS ((int, const char *, int, int));
-void tic4x_start_line
- PARAMS ((void));
-arelent *tc_gen_reloc
- PARAMS ((asection *, fixS *));
+static void tic4x_asg (int);
+static void tic4x_bss (int);
+static void tic4x_globl (int);
+static void tic4x_cons (int);
+static void tic4x_stringer (int);
+static void tic4x_eval (int);
+static void tic4x_newblock (int);
+static void tic4x_sect (int);
+static void tic4x_set (int);
+static void tic4x_usect (int);
+static void tic4x_version (int);
const pseudo_typeS
/* Turn generic_floating_point_number into a real short/float/double. */
static int
-tic4x_gen_to_words (flonum, words, precision)
- FLONUM_TYPE flonum;
- LITTLENUM_TYPE *words;
- int precision;
+tic4x_gen_to_words (FLONUM_TYPE flonum, LITTLENUM_TYPE *words, int precision)
{
int return_value = 0;
LITTLENUM_TYPE *p; /* Littlenum pointer. */
|| flonum.sign == 0) /* = NaN */
{
if(flonum.sign == 0)
- as_bad ("Nan, using zero.");
+ as_bad (_("Nan, using zero."));
words[0] = 0x8000;
return return_value;
}
}
if (abs (exponent) >= (1 << (exponent_bits - 1)))
- as_bad ("Cannot represent exponent in %d bits", exponent_bits);
+ as_bad (_("Cannot represent exponent in %d bits"), exponent_bits);
/* Force exponent to fit in desired field width. */
exponent &= (1 << (exponent_bits)) - 1;
/* Returns pointer past text consumed. */
static char *
-tic4x_atof (str, what_kind, words)
- char *str;
- char what_kind;
- LITTLENUM_TYPE *words;
+tic4x_atof (char *str, char what_kind, LITTLENUM_TYPE *words)
{
/* Extra bits for zeroed low-order bits. The 1st MAX_PRECISION are
zeroed, the last contain flonum bits. */
break;
default:
- as_bad ("Invalid floating point number");
+ as_bad (_("Invalid floating point number"));
return (NULL);
}
if (atof_generic (&return_value, ".", EXP_CHARS,
&generic_floating_point_number))
{
- as_bad ("Invalid floating point number");
+ as_bad (_("Invalid floating point number"));
return (NULL);
}
}
static void
-tic4x_insert_reg (regname, regnum)
- char *regname;
- int regnum;
+tic4x_insert_reg (char *regname, int regnum)
{
char buf[32];
int i;
}
static void
-tic4x_insert_sym (symname, value)
- char *symname;
- int value;
+tic4x_insert_sym (char *symname, int value)
{
symbolS *symbolP;
}
static char *
-tic4x_expression (str, exp)
- char *str;
- expressionS *exp;
+tic4x_expression (char *str, expressionS *exp)
{
char *s;
char *t;
}
static char *
-tic4x_expression_abs (str, value)
- char *str;
- offsetT *value;
+tic4x_expression_abs (char *str, offsetT *value)
{
char *s;
char *t;
}
static void
-tic4x_emit_char (c,b)
- char c;
- int b;
+tic4x_emit_char (char c, int b)
{
expressionS exp;
}
static void
-tic4x_seg_alloc (name, seg, size, symbolP)
- char *name ATTRIBUTE_UNUSED;
- segT seg ATTRIBUTE_UNUSED;
- int size;
- symbolS *symbolP;
+tic4x_seg_alloc (char *name ATTRIBUTE_UNUSED,
+ segT seg ATTRIBUTE_UNUSED,
+ int size,
+ symbolS *symbolP)
{
/* Note that the size is in words
so we multiply it by 4 to get the number of bytes to allocate. */
/* .asg ["]character-string["], symbol */
static void
-tic4x_asg (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_asg (int x ATTRIBUTE_UNUSED)
{
char c;
char *name;
input_line_pointer++;
if (*input_line_pointer != ',')
{
- as_bad ("Comma expected\n");
+ as_bad (_("Comma expected\n"));
return;
}
*input_line_pointer++ = '\0';
strcpy (tmp, name);
name = tmp;
if (hash_find (tic4x_asg_hash, name))
- hash_replace (tic4x_asg_hash, name, (PTR) str);
+ hash_replace (tic4x_asg_hash, name, (void *) str);
else
- hash_insert (tic4x_asg_hash, name, (PTR) str);
+ hash_insert (tic4x_asg_hash, name, (void *) str);
*input_line_pointer = c;
demand_empty_rest_of_line ();
}
/* .bss symbol, size */
static void
-tic4x_bss (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_bss (int x ATTRIBUTE_UNUSED)
{
char c;
char *name;
c = get_symbol_end (); /* Get terminator. */
if (c != ',')
{
- as_bad (".bss size argument missing\n");
+ as_bad (_(".bss size argument missing\n"));
return;
}
tic4x_expression_abs (++input_line_pointer, &size);
if (size < 0)
{
- as_bad (".bss size %ld < 0!", (long) size);
+ as_bad (_(".bss size %ld < 0!"), (long) size);
return;
}
subseg_set (bss_section, 0);
}
static void
-tic4x_globl (ignore)
- int ignore ATTRIBUTE_UNUSED;
+tic4x_globl (int ignore ATTRIBUTE_UNUSED)
{
char *name;
int c;
*input_line_pointer = c;
SKIP_WHITESPACE ();
S_SET_STORAGE_CLASS (symbolP, C_EXT);
+ S_SET_EXTERNAL (symbolP);
if (c == ',')
{
input_line_pointer++;
/* Handle .byte, .word. .int, .long */
static void
-tic4x_cons (bytes)
- int bytes;
+tic4x_cons (int bytes)
{
- register unsigned int c;
+ unsigned int c;
do
{
SKIP_WHITESPACE ();
/* Handle .ascii, .asciz, .string */
static void
-tic4x_stringer (append_zero)
- int append_zero; /*ex: bytes */
+tic4x_stringer (int append_zero)
{
int bytes;
- register unsigned int c;
+ unsigned int c;
bytes = 0;
do
input_line_pointer = tic4x_expression (input_line_pointer, &exp);
if (exp.X_op != O_constant)
{
- as_bad("Non-constant symbols not allowed\n");
+ as_bad (_("Non-constant symbols not allowed\n"));
return;
}
exp.X_add_number &= 255; /* Limit numeber to 8-bit */
/* .eval expression, symbol */
static void
-tic4x_eval (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_eval (int x ATTRIBUTE_UNUSED)
{
char c;
offsetT value;
tic4x_expression_abs (input_line_pointer, &value);
if (*input_line_pointer++ != ',')
{
- as_bad ("Symbol missing\n");
+ as_bad (_("Symbol missing\n"));
return;
}
name = input_line_pointer;
c = get_symbol_end (); /* Get terminator. */
- demand_empty_rest_of_line ();
tic4x_insert_sym (name, value);
+ *input_line_pointer++ = c;
+ demand_empty_rest_of_line ();
}
/* Reset local labels. */
static void
-tic4x_newblock (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_newblock (int x ATTRIBUTE_UNUSED)
{
dollar_label_clear ();
}
/* .sect "section-name" [, value] */
/* .sect ["]section-name[:subsection-name]["] [, value] */
static void
-tic4x_sect (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_sect (int x ATTRIBUTE_UNUSED)
{
char c;
char *section_name;
- char *subsection_name;
char *name;
segT seg;
offsetT num;
Volker Kuhlmann <v.kuhlmann@elec.canterbury.ac.nz>. */
if (c == ':')
{
- subsection_name = input_line_pointer;
c = get_symbol_end (); /* Get terminator. */
input_line_pointer++; /* Skip null symbol terminator. */
- as_warn (".sect: subsection name ignored");
+ as_warn (_(".sect: subsection name ignored"));
}
/* We might still have a '"' to discard, but the character after a
if (bfd_get_section_flags (stdoutput, seg) == SEC_NO_FLAGS)
{
if (!bfd_set_section_flags (stdoutput, seg, SEC_DATA))
- as_warn ("Error setting flags for \"%s\": %s", name,
+ as_warn (_("Error setting flags for \"%s\": %s"), name,
bfd_errmsg (bfd_get_error ()));
}
/* symbol[:] .set value or .set symbol, value */
static void
-tic4x_set (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_set (int x ATTRIBUTE_UNUSED)
{
symbolS *symbolP;
c = get_symbol_end (); /* Get terminator. */
if (c != ',')
{
- as_bad (".set syntax invalid\n");
+ as_bad (_(".set syntax invalid\n"));
ignore_rest_of_line ();
return;
}
/* [symbol] .usect ["]section-name["], size-in-words [, alignment-flag] */
static void
-tic4x_usect (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_usect (int x ATTRIBUTE_UNUSED)
{
char c;
char *name;
else
alignment_flag = 0;
if (alignment_flag)
- as_warn (".usect: non-zero alignment flag ignored");
+ as_warn (_(".usect: non-zero alignment flag ignored"));
seg = subseg_new (name, 0);
if (line_label != NULL)
}
seg_info (seg)->bss = 1; /* Uninitialised data. */
if (!bfd_set_section_flags (stdoutput, seg, SEC_ALLOC))
- as_warn ("Error setting flags for \"%s\": %s", name,
+ as_warn (_("Error setting flags for \"%s\": %s"), name,
bfd_errmsg (bfd_get_error ()));
tic4x_seg_alloc (name, seg, size, line_label);
/* .version cpu-version. */
static void
-tic4x_version (x)
- int x ATTRIBUTE_UNUSED;
+tic4x_version (int x ATTRIBUTE_UNUSED)
{
offsetT temp;
input_line_pointer =
tic4x_expression_abs (input_line_pointer, &temp);
if (!IS_CPU_TIC3X (temp) && !IS_CPU_TIC4X (temp))
- as_bad ("This assembler does not support processor generation %ld",
+ as_bad (_("This assembler does not support processor generation %ld"),
(long) temp);
if (tic4x_cpu && temp != (offsetT) tic4x_cpu)
- as_warn ("Changing processor generation on fly not supported...");
+ as_warn (_("Changing processor generation on fly not supported..."));
tic4x_cpu = temp;
demand_empty_rest_of_line ();
}
static void
-tic4x_init_regtable ()
+tic4x_init_regtable (void)
{
unsigned int i;
}
static void
-tic4x_init_symbols ()
+tic4x_init_symbols (void)
{
/* The TI tools accept case insensitive versions of these symbols,
we don't !
/* Insert a new instruction template into hash table. */
static int
-tic4x_inst_insert (inst)
- tic4x_inst_t *inst;
+tic4x_inst_insert (const tic4x_inst_t *inst)
{
static char prev_name[16];
const char *retval = NULL;
if (!strcmp (inst->name, prev_name) || inst->name[0] == '\0')
return 1;
- retval = hash_insert (tic4x_op_hash, inst->name, (PTR) inst);
+ retval = hash_insert (tic4x_op_hash, inst->name, (void *) inst);
if (retval != NULL)
fprintf (stderr, "internal error: can't hash `%s': %s\n",
inst->name, retval);
/* Make a new instruction template. */
static tic4x_inst_t *
-tic4x_inst_make (name, opcode, args)
- char *name;
- unsigned long opcode;
- char *args;
+tic4x_inst_make (char *name, unsigned long opcode, char *args)
{
static tic4x_inst_t *insts = NULL;
static char *names = NULL;
- static int index = 0;
+ static int iindex = 0;
if (insts == NULL)
{
insts = (tic4x_inst_t *)
xmalloc (sizeof (tic4x_inst_t) * 1024);
}
- insts[index].name = names;
- insts[index].opcode = opcode;
- insts[index].opmask = 0xffffffff;
- insts[index].args = args;
- index++;
+ insts[iindex].name = names;
+ insts[iindex].opcode = opcode;
+ insts[iindex].opmask = 0xffffffff;
+ insts[iindex].args = args;
+ iindex++;
do
*names++ = *name++;
while (*name);
*names++ = '\0';
- return &insts[index - 1];
+ return &insts[iindex - 1];
}
/* Add instruction template, creating dynamic templates as required. */
static int
-tic4x_inst_add (insts)
- tic4x_inst_t *insts;
+tic4x_inst_add (const tic4x_inst_t *insts)
{
char *s = insts->name;
char *d;
d = name;
/* We do not care about INSNs that is not a part of our
- oplevel setting */
- if (!insts->oplevel & tic4x_oplevel)
+ oplevel setting. */
+ if ((insts->oplevel & tic4x_oplevel) == 0)
return ok;
while (1)
set up all the tables, etc., that the MD part of the assembler will
need. */
void
-md_begin ()
+md_begin (void)
{
int ok = 1;
unsigned int i;
/* Add mnemonics to hash table, expanding conditional mnemonics on fly. */
for (i = 0; i < tic4x_num_insts; i++)
- ok &= tic4x_inst_add ((void *) &tic4x_insts[i]);
+ ok &= tic4x_inst_add (tic4x_insts + i);
/* Create dummy inst to avoid errors accessing end of table. */
tic4x_inst_make ("", 0, "");
}
void
-tic4x_end ()
+tic4x_end (void)
{
bfd_set_arch_mach (stdoutput, bfd_arch_tic4x,
IS_CPU_TIC4X (tic4x_cpu) ? bfd_mach_tic4x : bfd_mach_tic3x);
}
static int
-tic4x_indirect_parse (operand, indirect)
- tic4x_operand_t *operand;
- const tic4x_indirect_t *indirect;
+tic4x_indirect_parse (tic4x_operand_t *operand,
+ const tic4x_indirect_t *indirect)
{
char *n = indirect->name;
char *s = input_line_pointer;
if (operand->aregno >= REG_AR0 && operand->aregno <= REG_AR7)
break;
- as_bad ("Auxiliary register AR0--AR7 required for indirect");
+ as_bad (_("Auxiliary register AR0--AR7 required for indirect"));
return -1;
case 'd': /* Need to match constant for disp. */
operand->disp = operand->expr.X_add_number;
if (operand->disp < 0 || operand->disp > 255)
{
- as_bad ("Bad displacement %d (require 0--255)\n",
+ as_bad (_("Bad displacement %d (require 0--255)\n"),
operand->disp);
return -1;
}
if (operand->expr.X_add_number != REG_IR0
&& operand->expr.X_add_number != REG_IR1)
{
- as_bad ("Index register IR0,IR1 required for displacement");
+ as_bad (_("Index register IR0,IR1 required for displacement"));
return -1;
}
}
static char *
-tic4x_operand_parse (s, operand)
- char *s;
- tic4x_operand_t *operand;
+tic4x_operand_parse (char *s, tic4x_operand_t *operand)
{
unsigned int i;
char c;
expressionS *exp = &operand->expr;
char *save = input_line_pointer;
char *str;
- char *new;
+ char *new_pointer;
struct hash_entry *entry = NULL;
input_line_pointer = s;
str = input_line_pointer;
c = get_symbol_end (); /* Get terminator. */
- new = input_line_pointer;
+ new_pointer = input_line_pointer;
if (strlen (str) && (entry = hash_find (tic4x_asg_hash, str)) != NULL)
{
*input_line_pointer = c;
case '%':
input_line_pointer = tic4x_expression (++input_line_pointer, exp);
if (exp->X_op != O_register)
- as_bad ("Expecting a register name");
+ as_bad (_("Expecting a register name"));
operand->mode = M_REGISTER;
break;
else if (exp->X_op == O_big)
{
if (exp->X_add_number)
- as_bad ("Number too large"); /* bignum required */
+ as_bad (_("Number too large")); /* bignum required */
else
{
tic4x_gen_to_words (generic_floating_point_number,
else if (exp->X_op == O_big)
{
if (exp->X_add_number > 0)
- as_bad ("Number too large"); /* bignum required. */
+ as_bad (_("Number too large")); /* bignum required. */
else
{
tic4x_gen_to_words (generic_floating_point_number,
}
else
- as_bad ("Expecting a constant value");
+ as_bad (_("Expecting a constant value"));
break;
case '\\':
#endif
case '@':
input_line_pointer = tic4x_expression (++input_line_pointer, exp);
if (exp->X_op != O_constant && exp->X_op != O_symbol)
- as_bad ("Bad direct addressing construct %s", s);
+ as_bad (_("Bad direct addressing construct %s"), s);
if (exp->X_op == O_constant)
{
if (exp->X_add_number < 0)
- as_bad ("Direct value of %ld is not suitable",
+ as_bad (_("Direct value of %ld is not suitable"),
(long) exp->X_add_number);
}
operand->mode = M_DIRECT;
operand->expr.X_add_number = 0x18;
}
else
- as_bad ("Unknown indirect addressing mode");
+ as_bad (_("Unknown indirect addressing mode"));
break;
default:
else if (exp->X_op == O_big)
{
if (exp->X_add_number > 0)
- as_bad ("Number too large"); /* bignum required. */
+ as_bad (_("Number too large")); /* bignum required. */
else
{
tic4x_gen_to_words (generic_floating_point_number,
#endif
}
if (entry == NULL)
- new = input_line_pointer;
+ new_pointer = input_line_pointer;
input_line_pointer = save;
- return new;
+ return new_pointer;
}
static int
-tic4x_operands_match (inst, insn, check)
- tic4x_inst_t *inst;
- tic4x_insn_t *insn;
- int check;
+tic4x_operands_match (tic4x_inst_t *inst, tic4x_insn_t *tinsn, int check)
{
const char *args = inst->args;
unsigned long opcode = inst->opcode;
- int num_operands = insn->num_operands;
- tic4x_operand_t *operand = insn->operands;
+ int num_operands = tinsn->num_operands;
+ tic4x_operand_t *operand = tinsn->operands;
expressionS *exp = &operand->expr;
int ret = 1;
int reg;
If an operand matches, we modify insn or opcode appropriately,
and do a "continue". If an operand fails to match, we "break". */
- insn->nchars = 4; /* Instructions always 4 bytes. */
- insn->reloc = NO_RELOC;
- insn->pcrel = 0;
+ tinsn->nchars = 4; /* Instructions always 4 bytes. */
+ tinsn->reloc = NO_RELOC;
+ tinsn->pcrel = 0;
if (*args == '\0')
{
- insn->opcode = opcode;
+ tinsn->opcode = opcode;
return num_operands == 0;
}
case '\0': /* End of args. */
if (num_operands == 1)
{
- insn->opcode = opcode;
+ tinsn->opcode = opcode;
return ret;
}
break; /* Too many operands. */
else
{
if (!check)
- as_bad ("Immediate value of %ld is too large for ldf",
+ as_bad (_("Immediate value of %ld is too large for ldf"),
(long) exp->X_add_number);
ret = -1;
continue;
}
else if (exp->X_op == O_symbol)
{
- insn->reloc = BFD_RELOC_HI16;
- insn->exp = *exp;
+ tinsn->reloc = BFD_RELOC_HI16;
+ tinsn->exp = *exp;
continue;
}
break; /* Not direct (dp) addressing. */
}
else if (exp->X_op == O_symbol)
{
- insn->reloc = BFD_RELOC_LO16;
- insn->exp = *exp;
+ tinsn->reloc = BFD_RELOC_LO16;
+ tinsn->exp = *exp;
continue;
}
break; /* Not direct addressing. */
else
{
if (!check)
- as_bad ("Destination register must be ARn");
+ as_bad (_("Destination register must be ARn"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Immediate value of %ld is too large",
+ as_bad (_("Immediate value of %ld is too large"),
(long) exp->X_add_number);
ret = -1;
continue;
}
if (IS_CPU_TIC4X (tic4x_cpu))
{
- insn->reloc = BFD_RELOC_24_PCREL;
- insn->pcrel = 1;
+ tinsn->reloc = BFD_RELOC_24_PCREL;
+ tinsn->pcrel = 1;
}
else
{
- insn->reloc = BFD_RELOC_24;
- insn->pcrel = 0;
+ tinsn->reloc = BFD_RELOC_24;
+ tinsn->pcrel = 0;
}
- insn->exp = *exp;
+ tinsn->exp = *exp;
continue;
case 'C':
&& operand->expr.X_add_number != 0x18)
{
if (!check)
- as_bad ("Invalid indirect addressing mode");
+ as_bad (_("Invalid indirect addressing mode"));
ret = -1;
continue;
}
else
{
if (!check)
- as_bad ("Register must be Rn");
+ as_bad (_("Register must be Rn"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Register must be Rn");
+ as_bad (_("Register must be Rn"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Register must be R0--R7");
+ as_bad (_("Register must be R0--R7"));
ret = -1;
}
continue;
if (IS_CPU_TIC4X (tic4x_cpu))
break;
if (!check)
- as_bad ("Invalid indirect addressing mode displacement %d",
+ as_bad (_("Invalid indirect addressing mode displacement %d"),
operand->disp);
ret = -1;
continue;
if (IS_CPU_TIC4X (tic4x_cpu))
break;
if (!check)
- as_bad ("Invalid indirect addressing mode displacement %d",
+ as_bad (_("Invalid indirect addressing mode displacement %d"),
operand->disp);
ret = -1;
continue;
else
{
if (!check)
- as_bad ("Register must be R0--R7");
+ as_bad (_("Register must be R0--R7"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Register must be R0--R7");
+ as_bad (_("Register must be R0--R7"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Destination register must be R2 or R3");
+ as_bad (_("Destination register must be R2 or R3"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Destination register must be R0 or R1");
+ as_bad (_("Destination register must be R0 or R1"));
ret = -1;
}
continue;
&& operand->expr.X_add_number != 0x18)
{
if (!check)
- as_bad ("Invalid indirect addressing mode");
+ as_bad (_("Invalid indirect addressing mode"));
ret = -1;
continue;
}
else
{
if (!check)
- as_bad ("Displacement value of %ld is too large",
+ as_bad (_("Displacement value of %ld is too large"),
(long) exp->X_add_number);
ret = -1;
continue;
}
}
- insn->reloc = BFD_RELOC_16_PCREL;
- insn->pcrel = 1;
- insn->exp = *exp;
+ tinsn->reloc = BFD_RELOC_16_PCREL;
+ tinsn->pcrel = 1;
+ tinsn->exp = *exp;
continue;
case 'Q':
else
{
if (!check)
- as_bad ("Register must be Rn");
+ as_bad (_("Register must be Rn"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Register must be Rn");
+ as_bad (_("Register must be Rn"));
ret = -1;
}
continue;
if (exp->X_op == O_big)
{
if (!check)
- as_bad ("Floating point number not valid in expression");
+ as_bad (_("Floating point number not valid in expression"));
ret = -1;
continue;
}
else
{
if (!check)
- as_bad ("Signed immediate value %ld too large",
+ as_bad (_("Signed immediate value %ld too large"),
(long) exp->X_add_number);
ret = -1;
continue;
{
if (operand->mode == M_HI)
{
- insn->reloc = BFD_RELOC_HI16;
+ tinsn->reloc = BFD_RELOC_HI16;
}
else
{
- insn->reloc = BFD_RELOC_LO16;
+ tinsn->reloc = BFD_RELOC_LO16;
}
- insn->exp = *exp;
+ tinsn->exp = *exp;
continue;
}
/* Handle cases like ldi foo - $, ar0 where foo
is a forward reference. Perhaps we should check
for X_op == O_symbol and disallow things like
ldi foo, ar0. */
- insn->reloc = BFD_RELOC_16;
- insn->exp = *exp;
+ tinsn->reloc = BFD_RELOC_16;
+ tinsn->exp = *exp;
continue;
case 'T': /* 5-bit immediate value for tic4x stik. */
else
{
if (!check)
- as_bad ("Immediate value of %ld is too large",
+ as_bad (_("Immediate value of %ld is too large"),
(long) exp->X_add_number);
ret = -1;
continue;
else
{
if (!check)
- as_bad ("Unsigned immediate value %ld too large",
+ as_bad (_("Unsigned immediate value %ld too large"),
(long) exp->X_add_number);
ret = -1;
continue;
else if (exp->X_op == O_symbol)
{
if (operand->mode == M_HI)
- insn->reloc = BFD_RELOC_HI16;
+ tinsn->reloc = BFD_RELOC_HI16;
else
- insn->reloc = BFD_RELOC_LO16;
+ tinsn->reloc = BFD_RELOC_LO16;
- insn->exp = *exp;
+ tinsn->exp = *exp;
continue;
}
- insn->reloc = BFD_RELOC_16;
- insn->exp = *exp;
+ tinsn->reloc = BFD_RELOC_16;
+ tinsn->exp = *exp;
continue;
case 'V': /* Trap numbers (immediate field). */
else
{
if (!check)
- as_bad ("Immediate value of %ld is too large",
+ as_bad (_("Immediate value of %ld is too large"),
(long) exp->X_add_number);
ret = -1;
continue;
if (exp->X_op == O_big)
{
if (!check)
- as_bad ("Floating point number not valid in expression");
+ as_bad (_("Floating point number not valid in expression"));
ret = -1;
continue;
}
else
{
if (!check)
- as_bad ("Immediate value %ld too large",
+ as_bad (_("Immediate value %ld too large"),
(long) exp->X_add_number);
ret = -1;
continue;
}
}
- insn->reloc = BFD_RELOC_16;
- insn->exp = *exp;
+ tinsn->reloc = BFD_RELOC_16;
+ tinsn->exp = *exp;
continue;
case 'X': /* Expansion register for tic4x. */
else
{
if (!check)
- as_bad ("Register must be ivtp or tvtp");
+ as_bad (_("Register must be ivtp or tvtp"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Register must be address register");
+ as_bad (_("Register must be address register"));
ret = -1;
}
continue;
else
{
if (!check)
- as_bad ("Register must be ivtp or tvtp");
+ as_bad (_("Register must be ivtp or tvtp"));
ret = -1;
}
continue;
continue;
case '|': /* treat as `,' if have ldi_ldi form. */
- if (insn->parallel)
+ if (tinsn->parallel)
{
if (--num_operands < 0)
break; /* Too few operands. */
}
static void
-tic4x_insn_check (insn)
- tic4x_insn_t *insn;
+tic4x_insn_check (tic4x_insn_t *tinsn)
{
- if (!strcmp(insn->name, "lda"))
+ if (!strcmp (tinsn->name, "lda"))
{
- if (insn->num_operands < 2 || insn->num_operands > 2)
+ if (tinsn->num_operands < 2 || tinsn->num_operands > 2)
as_fatal ("Illegal internal LDA insn definition");
- if ( insn->operands[0].mode == M_REGISTER
- && insn->operands[1].mode == M_REGISTER
- && insn->operands[0].expr.X_add_number == insn->operands[1].expr.X_add_number )
- as_bad ("Source and destination register should not be equal");
+ if (tinsn->operands[0].mode == M_REGISTER
+ && tinsn->operands[1].mode == M_REGISTER
+ && tinsn->operands[0].expr.X_add_number == tinsn->operands[1].expr.X_add_number )
+ as_bad (_("Source and destination register should not be equal"));
}
- else if( !strcmp(insn->name, "ldi_ldi")
- || !strcmp(insn->name, "ldi1_ldi2")
- || !strcmp(insn->name, "ldi2_ldi1")
- || !strcmp(insn->name, "ldf_ldf")
- || !strcmp(insn->name, "ldf1_ldf2")
- || !strcmp(insn->name, "ldf2_ldf1") )
+ else if (!strcmp (tinsn->name, "ldi_ldi")
+ || !strcmp (tinsn->name, "ldi1_ldi2")
+ || !strcmp (tinsn->name, "ldi2_ldi1")
+ || !strcmp (tinsn->name, "ldf_ldf")
+ || !strcmp (tinsn->name, "ldf1_ldf2")
+ || !strcmp (tinsn->name, "ldf2_ldf1") )
{
- if ( insn->num_operands < 4 && insn->num_operands > 5 )
- as_fatal ("Illegal internal %s insn definition", insn->name);
+ if (tinsn->num_operands < 4 && tinsn->num_operands > 5 )
+ as_fatal ("Illegal internal %s insn definition", tinsn->name);
- if ( insn->operands[1].mode == M_REGISTER
- && insn->operands[insn->num_operands-1].mode == M_REGISTER
- && insn->operands[1].expr.X_add_number == insn->operands[insn->num_operands-1].expr.X_add_number )
- as_warn ("Equal parallell destination registers, one result will be discarded");
+ if (tinsn->operands[1].mode == M_REGISTER
+ && tinsn->operands[tinsn->num_operands-1].mode == M_REGISTER
+ && tinsn->operands[1].expr.X_add_number == tinsn->operands[tinsn->num_operands-1].expr.X_add_number )
+ as_warn (_("Equal parallell destination registers, one result will be discarded"));
}
}
static void
-tic4x_insn_output (insn)
- tic4x_insn_t *insn;
+tic4x_insn_output (tic4x_insn_t *tinsn)
{
char *dst;
/* Grab another fragment for opcode. */
- dst = frag_more (insn->nchars);
+ dst = frag_more (tinsn->nchars);
/* Put out opcode word as a series of bytes in little endian order. */
- md_number_to_chars (dst, insn->opcode, insn->nchars);
+ md_number_to_chars (dst, tinsn->opcode, tinsn->nchars);
/* Put out the symbol-dependent stuff. */
- if (insn->reloc != NO_RELOC)
+ if (tinsn->reloc != NO_RELOC)
{
/* Where is the offset into the fragment for this instruction. */
fix_new_exp (frag_now,
dst - frag_now->fr_literal, /* where */
- insn->nchars, /* size */
- &insn->exp,
- insn->pcrel,
- insn->reloc);
+ tinsn->nchars, /* size */
+ &tinsn->exp,
+ tinsn->pcrel,
+ tinsn->reloc);
}
}
/* Parse the operands. */
-int
-tic4x_operands_parse (s, operands, num_operands)
- char *s;
- tic4x_operand_t *operands;
- int num_operands;
+static int
+tic4x_operands_parse (char *s, tic4x_operand_t *operands, int num_operands)
{
if (!*s)
return num_operands;
if (num_operands > TIC4X_OPERANDS_MAX)
{
- as_bad ("Too many operands scanned");
+ as_bad (_("Too many operands scanned"));
return -1;
}
return num_operands;
by the generic front end. We just parse mnemonic and operands, and
produce the bytes of data and relocation. */
void
-md_assemble (str)
- char *str;
+md_assemble (char *str)
{
int ok = 0;
char *s;
int i;
int parsed = 0;
+ size_t len;
tic4x_inst_t *inst; /* Instruction template. */
tic4x_inst_t *first_inst;
{
if(insn->parallel)
{
- as_bad ("Parallel opcode cannot contain more than two instructions");
+ as_bad (_("Parallel opcode cannot contain more than two instructions"));
insn->parallel = 0;
insn->in_use = 0;
return;
s++;
if (*s) /* Null terminate for hash_find. */
*s++ = '\0'; /* and skip past null. */
- strcat (insn->name, "_");
- strncat (insn->name, str, TIC4X_NAME_MAX - strlen (insn->name));
+ len = strlen (insn->name);
+ snprintf (insn->name + len, TIC4X_NAME_MAX - len, "_%s", str);
insn->operands[insn->num_operands++].mode = M_PARALLEL;
if ((insn->inst = (struct tic4x_inst *)
hash_find (tic4x_op_hash, insn->name)) == NULL)
{
- as_bad ("Unknown opcode `%s'.", insn->name);
+ as_bad (_("Unknown opcode `%s'."), insn->name);
insn->parallel = 0;
insn->in_use = 0;
return;
{
if (first_inst)
tic4x_operands_match (first_inst, insn, 0);
- as_bad ("Invalid operands for %s", insn->name);
+ as_bad (_("Invalid operands for %s"), insn->name);
}
else
- as_bad ("Invalid instruction %s", insn->name);
+ as_bad (_("Invalid instruction %s"), insn->name);
}
if (str && !parsed)
s++;
if (*s) /* Null terminate for hash_find. */
*s++ = '\0'; /* and skip past null. */
- strncpy (insn->name, str, TIC4X_NAME_MAX - 3);
+ strncpy (insn->name, str, TIC4X_NAME_MAX - 1);
+ insn->name[TIC4X_NAME_MAX - 1] = '\0';
if ((i = tic4x_operands_parse (s, insn->operands, 0)) < 0)
{
}
void
-tic4x_cleanup ()
+tic4x_cleanup (void)
{
if (insn->in_use)
md_assemble (NULL);
/* Turn a string in input_line_pointer into a floating point constant
of type type, and store the appropriate bytes in *litP. The number
- of LITTLENUMS emitted is stored in *sizeP. An error message is
+ of chars emitted is stored in *sizeP. An error message is
returned, or NULL on OK. */
char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
+md_atof (int type, char *litP, int *sizeP)
{
int prec;
int ieee;
switch (type)
{
- case 's': /* .single */
+ case 's': /* .single */
case 'S':
ieee = 0;
prec = 1;
break;
- case 'd': /* .double */
+ case 'd': /* .double */
case 'D':
- case 'f': /* .float or .single */
+ case 'f': /* .float */
case 'F':
ieee = 0;
- prec = 2; /* 1 32-bit word */
+ prec = 2; /* 1 32-bit word */
break;
- case 'i': /* .ieee */
+ case 'i': /* .ieee */
case 'I':
prec = 2;
ieee = 1;
- type = 'f'; /* Rewrite type to be usable by atof_ieee() */
+ type = 'f'; /* Rewrite type to be usable by atof_ieee(). */
break;
- case 'e': /* .ldouble */
+ case 'e': /* .ldouble */
case 'E':
- prec = 4; /* 2 32-bit words */
+ prec = 4; /* 2 32-bit words */
ieee = 0;
break;
default:
*sizeP = 0;
- return "Bad call to md_atof()";
+ return _("Unrecognized or unsupported floating point constant");
}
if (ieee)
little endian byte order. */
/* SES: However it is required to put the words (32-bits) out in the
correct order, hence we write 2 and 2 littlenums in little endian
- order, while we keep the original order on successive words. */
- for(wordP = words; wordP<(words+prec) ; wordP+=2)
+ order, while we keep the original order on successive words. */
+ for (wordP = words; wordP<(words+prec) ; wordP+=2)
{
- if (wordP<(words+prec-1)) /* Dump wordP[1] (if we have one) */
+ if (wordP < (words + prec - 1)) /* Dump wordP[1] (if we have one). */
{
md_number_to_chars (litP, (valueT) (wordP[1]),
sizeof (LITTLENUM_TYPE));
sizeof (LITTLENUM_TYPE));
litP += sizeof (LITTLENUM_TYPE);
}
- return 0;
+ return NULL;
}
void
-md_apply_fix (fixP, value, seg)
- fixS *fixP;
- valueT *value;
- segT seg ATTRIBUTE_UNUSED;
+md_apply_fix (fixS *fixP, valueT *value, segT seg ATTRIBUTE_UNUSED)
{
char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
valueT val = *value;
case NO_RELOC:
default:
- as_bad ("Bad relocation type: 0x%02x", fixP->fx_r_type);
+ as_bad (_("Bad relocation type: 0x%02x"), fixP->fx_r_type);
break;
}
/* Should never be called for tic4x. */
void
-md_convert_frag (headers, sec, fragP)
- bfd *headers ATTRIBUTE_UNUSED;
- segT sec ATTRIBUTE_UNUSED;
- fragS *fragP ATTRIBUTE_UNUSED;
+md_convert_frag (bfd *headers ATTRIBUTE_UNUSED,
+ segT sec ATTRIBUTE_UNUSED,
+ fragS *fragP ATTRIBUTE_UNUSED)
{
as_fatal ("md_convert_frag");
}
/* Should never be called for tic4x. */
void
-md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr ATTRIBUTE_UNUSED;
- addressT from_addr ATTRIBUTE_UNUSED;
- addressT to_addr ATTRIBUTE_UNUSED;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
+md_create_short_jump (char *ptr ATTRIBUTE_UNUSED,
+ addressT from_addr ATTRIBUTE_UNUSED,
+ addressT to_addr ATTRIBUTE_UNUSED,
+ fragS *frag ATTRIBUTE_UNUSED,
+ symbolS *to_symbol ATTRIBUTE_UNUSED)
{
as_fatal ("md_create_short_jmp\n");
}
/* Should never be called for tic4x. */
void
-md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr ATTRIBUTE_UNUSED;
- addressT from_addr ATTRIBUTE_UNUSED;
- addressT to_addr ATTRIBUTE_UNUSED;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
+md_create_long_jump (char *ptr ATTRIBUTE_UNUSED,
+ addressT from_addr ATTRIBUTE_UNUSED,
+ addressT to_addr ATTRIBUTE_UNUSED,
+ fragS *frag ATTRIBUTE_UNUSED,
+ symbolS *to_symbol ATTRIBUTE_UNUSED)
{
as_fatal ("md_create_long_jump\n");
}
/* Should never be called for tic4x. */
int
-md_estimate_size_before_relax (fragP, segtype)
- register fragS *fragP ATTRIBUTE_UNUSED;
- segT segtype ATTRIBUTE_UNUSED;
+md_estimate_size_before_relax (fragS *fragP ATTRIBUTE_UNUSED,
+ segT segtype ATTRIBUTE_UNUSED)
{
as_fatal ("md_estimate_size_before_relax\n");
return 0;
int
-md_parse_option (c, arg)
- int c;
- char *arg;
+md_parse_option (int c, char *arg)
{
switch (c)
{
arg++;
tic4x_cpu = atoi (arg);
if (!IS_CPU_TIC3X (tic4x_cpu) && !IS_CPU_TIC4X (tic4x_cpu))
- as_warn ("Unsupported processor generation %d", tic4x_cpu);
+ as_warn (_("Unsupported processor generation %d"), tic4x_cpu);
break;
case OPTION_REV: /* cpu revision */
break;
case 'b':
- as_warn ("Option -b is depreciated, please use -mbig");
+ as_warn (_("Option -b is depreciated, please use -mbig"));
case OPTION_BIG: /* big model */
tic4x_big_model = 1;
break;
case 'p':
- as_warn ("Option -p is depreciated, please use -mmemparm");
+ as_warn (_("Option -p is depreciated, please use -mmemparm"));
case OPTION_MEMPARM: /* push args */
tic4x_reg_args = 0;
break;
case 'r':
- as_warn ("Option -r is depreciated, please use -mregparm");
+ as_warn (_("Option -r is depreciated, please use -mregparm"));
case OPTION_REGPARM: /* register args */
tic4x_reg_args = 1;
break;
case 's':
- as_warn ("Option -s is depreciated, please use -msmall");
+ as_warn (_("Option -s is depreciated, please use -msmall"));
case OPTION_SMALL: /* small model */
tic4x_big_model = 0;
break;
}
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
fprintf (stream,
_("\nTIC4X options:\n"
definitions of TI C3x tools style local labels $n where n is a single
decimal digit. */
int
-tic4x_unrecognized_line (c)
- int c;
+tic4x_unrecognized_line (int c)
{
int lab;
char *s;
if (dollar_label_defined (lab))
{
- as_bad ("Label \"$%d\" redefined", lab);
+ as_bad (_("Label \"$%d\" redefined"), lab);
return 0;
}
/* Handle local labels peculiar to us referred to in an expression. */
symbolS *
-md_undefined_symbol (name)
- char *name;
+md_undefined_symbol (char *name)
{
/* Look for local labels of the form $n. */
if (name[0] == '$' && ISDIGIT (name[1]))
/* Parse an operand that is machine-specific. */
void
-md_operand (expressionP)
- expressionS *expressionP ATTRIBUTE_UNUSED;
+md_operand (expressionS *expressionP ATTRIBUTE_UNUSED)
{
}
/* Round up a section size to the appropriate boundary---do we need this? */
valueT
-md_section_align (segment, size)
- segT segment ATTRIBUTE_UNUSED;
- valueT size;
+md_section_align (segT segment ATTRIBUTE_UNUSED, valueT size)
{
return size; /* Byte (i.e., 32-bit) alignment is fine? */
}
static int
-tic4x_pc_offset (op)
- unsigned int op;
+tic4x_pc_offset (unsigned int op)
{
/* Determine the PC offset for a C[34]x instruction.
This could be simplified using some boolean algebra
DBcondD, BcondD disp + PC + 3 => PC
*/
long
-md_pcrel_from (fixP)
- fixS *fixP;
+md_pcrel_from (fixS *fixP)
{
unsigned char *buf;
unsigned int op;
/* Fill the alignment area with NOP's on .text, unless fill-data
was specified. */
int
-tic4x_do_align (alignment, fill, len, max)
- int alignment ATTRIBUTE_UNUSED;
- const char *fill ATTRIBUTE_UNUSED;
- int len ATTRIBUTE_UNUSED;
- int max ATTRIBUTE_UNUSED;
+tic4x_do_align (int alignment,
+ const char *fill,
+ int len,
+ int max)
{
- unsigned long nop = TIC_NOP_OPCODE;
-
/* Because we are talking lwords, not bytes, adjust alignment to do words */
alignment += 2;
{
if (fill == NULL)
{
- /*if (subseg_text_p (now_seg))*/ /* FIXME: doesn't work for .text for some reason */
- frag_align_pattern( alignment, (const char *)&nop, sizeof(nop), max);
- return 1;
- /*else
- frag_align (alignment, 0, max);*/
+ if (subseg_text_p (now_seg))
+ {
+ char nop[4];
+
+ md_number_to_chars (nop, TIC_NOP_OPCODE, 4);
+ frag_align_pattern (alignment, nop, sizeof (nop), max);
+ }
+ else
+ frag_align (alignment, 0, max);
}
else if (len <= 1)
frag_align (alignment, *fill, max);
/* Look for and remove parallel instruction operator ||. */
void
-tic4x_start_line ()
+tic4x_start_line (void)
{
char *s = input_line_pointer;
}
arelent *
-tc_gen_reloc (seg, fixP)
- asection *seg ATTRIBUTE_UNUSED;
- fixS *fixP;
+tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED, fixS *fixP)
{
arelent *reloc;
if (reloc->howto == (reloc_howto_type *) NULL)
{
as_bad_where (fixP->fx_file, fixP->fx_line,
- "Reloc %d not supported by object file format",
+ _("Reloc %d not supported by object file format"),
(int) fixP->fx_r_type);
return NULL;
}