/* TI C6X assembler.
- Copyright 2010
- Free Software Foundation, Inc.
+ Copyright (C) 2010-2019 Free Software Foundation, Inc.
+ Contributed by Joseph Myers <joseph@codesourcery.com>
+ Bernd Schmidt <bernds@codesourcery.com>
This file is part of GAS, the GNU Assembler.
#include "as.h"
#include "dwarf2dbg.h"
+#include "dw2gencfi.h"
#include "safe-ctype.h"
#include "subsegs.h"
#include "opcode/tic6x.h"
#define TRUNC(X) ((valueT) (X) & 0xffffffffU)
#define SEXT(X) ((TRUNC (X) ^ 0x80000000U) - 0x80000000U)
+#define streq(a, b) (strcmp (a, b) == 0)
+
+/* Stuff for .scomm symbols. */
+static segT sbss_section;
+static asection scom_section;
+static asymbol scom_symbol;
+
const char comment_chars[] = ";";
const char line_comment_chars[] = "#*;";
const char line_separator_chars[] = "@";
enum
{
OPTION_MARCH = OPTION_MD_BASE,
- OPTION_MATOMIC,
- OPTION_MNO_ATOMIC,
OPTION_MBIG_ENDIAN,
OPTION_MLITTLE_ENDIAN,
+ OPTION_MDSBT,
+ OPTION_MNO_DSBT,
+ OPTION_MPID,
+ OPTION_MPIC,
+ OPTION_MNO_PIC,
OPTION_MGENERATE_REL
};
struct option md_longopts[] =
{
{ "march", required_argument, NULL, OPTION_MARCH },
- { "matomic", no_argument, NULL, OPTION_MATOMIC },
- { "mno-atomic", no_argument, NULL, OPTION_MNO_ATOMIC },
{ "mbig-endian", no_argument, NULL, OPTION_MBIG_ENDIAN },
{ "mlittle-endian", no_argument, NULL, OPTION_MLITTLE_ENDIAN },
+ { "mdsbt", no_argument, NULL, OPTION_MDSBT },
+ { "mno-dsbt", no_argument, NULL, OPTION_MNO_DSBT },
+ { "mpid", required_argument, NULL, OPTION_MPID },
+ { "mpic", no_argument, NULL, OPTION_MPIC },
+ { "mno-pic", no_argument, NULL, OPTION_MNO_PIC },
{ "mgenerate-rel", no_argument, NULL, OPTION_MGENERATE_REL },
{ NULL, no_argument, NULL, 0 }
};
size_t md_longopts_size = sizeof (md_longopts);
-/* Whether to enable atomic instructions. 1 to enable them, 0 to
- disable, -1 to default from architecture. */
-static int tic6x_atomic = -1;
-
/* The instructions enabled based only on the selected architecture
- (all instructions, if no architecture specified). Atomic
- instructions may be enabled or disabled separately. */
+ (all instructions, if no architecture specified). */
static unsigned short tic6x_arch_enable = (TIC6X_INSN_C62X
| TIC6X_INSN_C64X
| TIC6X_INSN_C64XP
| TIC6X_INSN_C67X
| TIC6X_INSN_C67XP
- | TIC6X_INSN_C674X
- | TIC6X_INSN_ATOMIC);
+ | TIC6X_INSN_C674X);
/* The instructions enabled based on the current set of features
(architecture, as modified by other options). */
static unsigned short tic6x_features;
-/* The architecture attribute value, or C6XABI_Tag_CPU_arch_none if
+/* The architecture attribute value, or C6XABI_Tag_ISA_none if
not yet set. */
-static int tic6x_arch_attribute = C6XABI_Tag_CPU_arch_none;
+static int tic6x_arch_attribute = C6XABI_Tag_ISA_none;
/* Whether any instructions at all have been seen. Once any
instructions have been seen, architecture attributes merge into the
/* Whether to generate RELA relocations. */
static bfd_boolean tic6x_generate_rela = TRUE;
+/* Whether the code uses DSBT addressing. */
+static bfd_boolean tic6x_dsbt;
+
+/* Types of position-independent data (attribute values for
+ Tag_ABI_PID). */
+typedef enum
+ {
+ tic6x_pid_no = 0,
+ tic6x_pid_near = 1,
+ tic6x_pid_far = 2
+ } tic6x_pid_type;
+
+/* The type of data addressing used in this code. */
+static tic6x_pid_type tic6x_pid;
+
+/* Whether the code uses position-independent code. */
+static bfd_boolean tic6x_pic;
+
/* Table of supported architecture variants. */
typedef struct
{
} tic6x_arch_table;
static const tic6x_arch_table tic6x_arches[] =
{
- { "c62x", C6XABI_Tag_CPU_arch_C62X, TIC6X_INSN_C62X },
- { "c64x", C6XABI_Tag_CPU_arch_C64X, TIC6X_INSN_C62X | TIC6X_INSN_C64X },
- { "c64x+", C6XABI_Tag_CPU_arch_C64XP, (TIC6X_INSN_C62X
- | TIC6X_INSN_C64X
- | TIC6X_INSN_C64XP) },
- { "c67x", C6XABI_Tag_CPU_arch_C67X, TIC6X_INSN_C62X | TIC6X_INSN_C67X },
- { "c67x+", C6XABI_Tag_CPU_arch_C67XP, (TIC6X_INSN_C62X
- | TIC6X_INSN_C67X
- | TIC6X_INSN_C67XP) },
- { "c674x", C6XABI_Tag_CPU_arch_C674X, (TIC6X_INSN_C62X
- | TIC6X_INSN_C64X
- | TIC6X_INSN_C64XP
- | TIC6X_INSN_C67X
- | TIC6X_INSN_C67XP
- | TIC6X_INSN_C674X) }
+ { "c62x", C6XABI_Tag_ISA_C62X, TIC6X_INSN_C62X },
+ { "c64x", C6XABI_Tag_ISA_C64X, TIC6X_INSN_C62X | TIC6X_INSN_C64X },
+ { "c64x+", C6XABI_Tag_ISA_C64XP, (TIC6X_INSN_C62X
+ | TIC6X_INSN_C64X
+ | TIC6X_INSN_C64XP) },
+ { "c67x", C6XABI_Tag_ISA_C67X, TIC6X_INSN_C62X | TIC6X_INSN_C67X },
+ { "c67x+", C6XABI_Tag_ISA_C67XP, (TIC6X_INSN_C62X
+ | TIC6X_INSN_C67X
+ | TIC6X_INSN_C67XP) },
+ { "c674x", C6XABI_Tag_ISA_C674X, (TIC6X_INSN_C62X
+ | TIC6X_INSN_C64X
+ | TIC6X_INSN_C64XP
+ | TIC6X_INSN_C67X
+ | TIC6X_INSN_C67XP
+ | TIC6X_INSN_C674X) }
};
+/* Caller saved register encodings. The standard frame layout uses this
+ order, starting from the highest address. There must be
+ TIC6X_NUM_UNWIND_REGS values. */
+enum
+{
+ UNWIND_A15,
+ UNWIND_B15,
+ UNWIND_B14,
+ UNWIND_B13,
+ UNWIND_B12,
+ UNWIND_B11,
+ UNWIND_B10,
+ UNWIND_B3,
+ UNWIND_A14,
+ UNWIND_A13,
+ UNWIND_A12,
+ UNWIND_A11,
+ UNWIND_A10
+};
+
+static void tic6x_output_unwinding (bfd_boolean need_extab);
+
+/* Return the frame unwind state for the current function, allocating
+ as necessary. */
+
+static tic6x_unwind_info *tic6x_get_unwind (void)
+{
+ tic6x_unwind_info *unwind;
+
+ unwind = seg_info (now_seg)->tc_segment_info_data.unwind;
+ if (unwind)
+ return unwind;
+
+ unwind = seg_info (now_seg)->tc_segment_info_data.text_unwind;
+ if (unwind)
+ return unwind;
+
+ unwind =XNEW (tic6x_unwind_info);
+ seg_info (now_seg)->tc_segment_info_data.unwind = unwind;
+ memset (unwind, 0, sizeof (*unwind));
+ return unwind;
+}
+
/* Update the selected architecture based on ARCH, giving an error if
ARCH is an invalid value. Does not call tic6x_update_features; the
caller must do that if necessary. */
as_bad (_("unknown architecture '%s'"), arch);
}
+/* Table of supported -mpid arguments. */
+typedef struct
+{
+ const char *arg;
+ tic6x_pid_type attr;
+} tic6x_pid_type_table;
+static const tic6x_pid_type_table tic6x_pid_types[] =
+ {
+ { "no", tic6x_pid_no },
+ { "near", tic6x_pid_near },
+ { "far", tic6x_pid_far }
+ };
+
+/* Handle -mpid=ARG. */
+
+static void
+tic6x_use_pid (const char *arg)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE (tic6x_pid_types); i++)
+ if (strcmp (arg, tic6x_pid_types[i].arg) == 0)
+ {
+ tic6x_pid = tic6x_pid_types[i].attr;
+ return;
+ }
+
+ as_bad (_("unknown -mpid= argument '%s'"), arg);
+}
+
/* Parse a target-specific option. */
int
-md_parse_option (int c, char *arg)
+md_parse_option (int c, const char *arg)
{
switch (c)
{
tic6x_use_arch (arg);
break;
- case OPTION_MATOMIC:
- tic6x_atomic = 1;
- break;
-
- case OPTION_MNO_ATOMIC:
- tic6x_atomic = 0;
- break;
-
case OPTION_MBIG_ENDIAN:
target_big_endian = 1;
break;
target_big_endian = 0;
break;
+ case OPTION_MDSBT:
+ tic6x_dsbt = 1;
+ break;
+
+ case OPTION_MNO_DSBT:
+ tic6x_dsbt = 0;
+ break;
+
+ case OPTION_MPID:
+ tic6x_use_pid (arg);
+ break;
+
+ case OPTION_MPIC:
+ tic6x_pic = 1;
+ break;
+
+ case OPTION_MNO_PIC:
+ tic6x_pic = 0;
+ break;
+
case OPTION_MGENERATE_REL:
tic6x_generate_rela = FALSE;
break;
fputc ('\n', stream);
fprintf (stream, _("TMS320C6000 options:\n"));
fprintf (stream, _(" -march=ARCH enable instructions from architecture ARCH\n"));
- fprintf (stream, _(" -matomic enable atomic operation instructions\n"));
- fprintf (stream, _(" -mno-atomic disable atomic operation instructions\n"));
fprintf (stream, _(" -mbig-endian generate big-endian code\n"));
fprintf (stream, _(" -mlittle-endian generate little-endian code\n"));
+ fprintf (stream, _(" -mdsbt code uses DSBT addressing\n"));
+ fprintf (stream, _(" -mno-dsbt code does not use DSBT addressing\n"));
+ fprintf (stream, _(" -mpid=no code uses position-dependent data addressing\n"));
+ fprintf (stream, _(" -mpid=near code uses position-independent data addressing,\n"
+ " GOT accesses use near DP addressing\n"));
+ fprintf (stream, _(" -mpid=far code uses position-independent data addressing,\n"
+ " GOT accesses use far DP addressing\n"));
+ fprintf (stream, _(" -mpic code addressing is position-independent\n"));
+ fprintf (stream, _(" -mno-pic code addressing is position-dependent\n"));
/* -mgenerate-rel is only for testsuite use and is deliberately
undocumented. */
static void
tic6x_update_features (void)
{
- switch (tic6x_atomic)
- {
- case -1:
- tic6x_features = tic6x_arch_enable;
- break;
-
- case 0:
- tic6x_features = tic6x_arch_enable & ~TIC6X_INSN_ATOMIC;
- break;
-
- case 1:
- tic6x_features = tic6x_arch_enable | TIC6X_INSN_ATOMIC;
- break;
-
- default:
- abort ();
- }
+ tic6x_features = tic6x_arch_enable;
tic6x_num_registers
= (tic6x_arch_enable & (TIC6X_INSN_C64X | TIC6X_INSN_C67XP)) ? 32 : 16;
tic6x_update_features ();
}
-/* Parse a .arch directive. */
+/* Parse a .cantunwind directive. */
+static void
+s_tic6x_cantunwind (int ignored ATTRIBUTE_UNUSED)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+
+ /* GCC sometimes spits out superfluous .cantunwind directives, so ignore
+ them. */
+ if (unwind->data_bytes == 0)
+ return;
+
+ if (unwind->data_bytes != -1)
+ {
+ as_bad (_("unexpected .cantunwind directive"));
+ return;
+ }
+
+ demand_empty_rest_of_line ();
+
+ if (unwind->personality_routine || unwind->personality_index != -1)
+ as_bad (_("personality routine specified for cantunwind frame"));
+
+ unwind->personality_index = -2;
+}
+
+/* Parse a .handlerdata directive. */
+static void
+s_tic6x_handlerdata (int ignored ATTRIBUTE_UNUSED)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+
+ if (!unwind->saved_seg)
+ {
+ as_bad (_("unexpected .handlerdata directive"));
+ return;
+ }
+
+ if (unwind->table_entry || unwind->personality_index == -2)
+ {
+ as_bad (_("duplicate .handlerdata directive"));
+ return;
+ }
+
+ if (unwind->personality_index == -1 && unwind->personality_routine == NULL)
+ {
+ as_bad (_("personality routine required before .handlerdata directive"));
+ return;
+ }
+
+ tic6x_output_unwinding (TRUE);
+}
+
+/* Parse a .endp directive. */
+static void
+s_tic6x_endp (int ignored ATTRIBUTE_UNUSED)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+
+ if (unwind->data_bytes != 0)
+ {
+ /* Output a .exidx entry if we have not already done so.
+ Then switch back to the text section. */
+ if (!unwind->table_entry)
+ tic6x_output_unwinding (FALSE);
+
+ subseg_set (unwind->saved_seg, unwind->saved_subseg);
+ }
+
+ unwind->saved_seg = NULL;
+ unwind->table_entry = NULL;
+ unwind->data_bytes = 0;
+}
+
+/* Parse a .personalityindex directive. */
+static void
+s_tic6x_personalityindex (int ignored ATTRIBUTE_UNUSED)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+ expressionS exp;
+
+ if (unwind->personality_routine || unwind->personality_index != -1)
+ as_bad (_("duplicate .personalityindex directive"));
+
+ expression (&exp);
+
+ if (exp.X_op != O_constant
+ || exp.X_add_number < 0 || exp.X_add_number > 15)
+ {
+ as_bad (_("bad personality routine number"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ unwind->personality_index = exp.X_add_number;
+
+ demand_empty_rest_of_line ();
+}
+
+static void
+s_tic6x_personality (int ignored ATTRIBUTE_UNUSED)
+{
+ char *name, c;
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+
+ if (unwind->personality_routine || unwind->personality_index != -1)
+ as_bad (_("duplicate .personality directive"));
+
+ c = get_symbol_name (&name);
+ unwind->personality_routine = symbol_find_or_make (name);
+ (void) restore_line_pointer (c);
+ demand_empty_rest_of_line ();
+}
+/* Parse a .arch directive. */
static void
s_tic6x_arch (int ignored ATTRIBUTE_UNUSED)
{
demand_empty_rest_of_line ();
}
-/* Parse a .atomic directive. */
+/* Parse a .ehtype directive. */
static void
-s_tic6x_atomic (int ignored ATTRIBUTE_UNUSED)
+s_tic6x_ehtype (int ignored ATTRIBUTE_UNUSED)
{
- tic6x_atomic = 1;
- tic6x_update_features ();
+ expressionS exp;
+ char *p;
+
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
+ if (is_it_end_of_statement ())
+ {
+ demand_empty_rest_of_line ();
+ return;
+ }
+
+#ifdef md_cons_align
+ md_cons_align (4);
+#endif
+
+
+ expression (&exp);
+
+ if (exp.X_op != O_symbol)
+ {
+ as_bad (_("expected symbol"));
+ return;
+ }
+
+ p = frag_more (4);
+ memset (p, 0, 4);
+ fix_new_exp (frag_now, p - frag_now->fr_literal, 4,
+ &exp, 0, BFD_RELOC_C6000_EHTYPE);
+
demand_empty_rest_of_line ();
}
-/* Parse a .noatomic directive. */
+/* Parse a .nocmp directive. */
static void
-s_tic6x_noatomic (int ignored ATTRIBUTE_UNUSED)
+s_tic6x_nocmp (int ignored ATTRIBUTE_UNUSED)
{
- tic6x_atomic = 0;
- tic6x_update_features ();
+ seg_info (now_seg)->tc_segment_info_data.nocmp = TRUE;
demand_empty_rest_of_line ();
}
-/* Parse a .nocmp directive. */
+/* .scomm pseudo-op handler.
+
+ This is a new pseudo-op to handle putting objects in .scommon.
+ By doing this the linker won't need to do any work,
+ and more importantly it removes the implicit -G arg necessary to
+ correctly link the object file. */
static void
-s_tic6x_nocmp (int ignored ATTRIBUTE_UNUSED)
+s_tic6x_scomm (int ignore ATTRIBUTE_UNUSED)
{
- seg_info (now_seg)->tc_segment_info_data.nocmp = TRUE;
+ char *name;
+ char c;
+ char *p;
+ offsetT size;
+ symbolS *symbolP;
+ offsetT align;
+ int align2;
+
+ c = get_symbol_name (&name);
+
+ /* Just after name is now '\0'. */
+ p = input_line_pointer;
+ (void) restore_line_pointer (c);
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer != ',')
+ {
+ as_bad (_("expected comma after symbol name"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ /* Skip ','. */
+ input_line_pointer++;
+ if ((size = get_absolute_expression ()) < 0)
+ {
+ /* xgettext:c-format */
+ as_warn (_("invalid length for .scomm directive"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ /* The third argument to .scomm is the alignment. */
+ if (*input_line_pointer != ',')
+ align = 8;
+ else
+ {
+ ++input_line_pointer;
+ align = get_absolute_expression ();
+ if (align <= 0)
+ {
+ as_warn (_("alignment is not a positive number"));
+ align = 8;
+ }
+ }
+
+ /* Convert to a power of 2 alignment. */
+ if (align)
+ {
+ for (align2 = 0; (align & 1) == 0; align >>= 1, ++align2)
+ continue;
+ if (align != 1)
+ {
+ as_bad (_("alignment is not a power of 2"));
+ ignore_rest_of_line ();
+ return;
+ }
+ }
+ else
+ align2 = 0;
+
+ *p = 0;
+ symbolP = symbol_find_or_make (name);
+ *p = c;
+
+ if (S_IS_DEFINED (symbolP))
+ {
+ /* xgettext:c-format */
+ as_bad (_("attempt to re-define symbol `%s'"),
+ S_GET_NAME (symbolP));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (S_GET_VALUE (symbolP) && S_GET_VALUE (symbolP) != (valueT) size)
+ {
+ /* xgettext:c-format */
+ as_bad (_("attempt to redefine `%s' with a different length"),
+ S_GET_NAME (symbolP));
+
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (symbol_get_obj (symbolP)->local)
+ {
+ segT old_sec = now_seg;
+ int old_subsec = now_subseg;
+ char *pfrag;
+
+ record_alignment (sbss_section, align2);
+ subseg_set (sbss_section, 0);
+
+ if (align2)
+ frag_align (align2, 0, 0);
+
+ if (S_GET_SEGMENT (symbolP) == sbss_section)
+ symbol_get_frag (symbolP)->fr_symbol = 0;
+
+ symbol_set_frag (symbolP, frag_now);
+
+ pfrag = frag_var (rs_org, 1, 1, (relax_substateT) 0, symbolP, size,
+ (char *) 0);
+ *pfrag = 0;
+ S_SET_SIZE (symbolP, size);
+ S_SET_SEGMENT (symbolP, sbss_section);
+ S_CLEAR_EXTERNAL (symbolP);
+ subseg_set (old_sec, old_subsec);
+ }
+ else
+ {
+ S_SET_VALUE (symbolP, (valueT) size);
+ S_SET_ALIGN (symbolP, 1 << align2);
+ S_SET_EXTERNAL (symbolP);
+ S_SET_SEGMENT (symbolP, &scom_section);
+ }
+
+ symbol_get_bfdsym (symbolP)->flags |= BSF_OBJECT;
+
demand_empty_rest_of_line ();
}
static void
s_tic6x_c6xabi_attribute (int ignored ATTRIBUTE_UNUSED)
{
- int tag = s_vendor_attribute (OBJ_ATTR_PROC);
+ int tag = obj_elf_vendor_attribute (OBJ_ATTR_PROC);
if (tag < NUM_KNOWN_OBJ_ATTRIBUTES)
tic6x_attributes_set_explicitly[tag] = TRUE;
static const tic6x_attribute_table tic6x_attributes[] =
{
-#define TAG(tag, value) { #tag, tag }
+#define TAG(tag, value) { #tag, tag },
#include "elf/tic6x-attrs.h"
#undef TAG
};
const pseudo_typeS md_pseudo_table[] =
{
{ "arch", s_tic6x_arch, 0 },
- { "atomic", s_tic6x_atomic, 0 },
{ "c6xabi_attribute", s_tic6x_c6xabi_attribute, 0 },
- { "noatomic", s_tic6x_noatomic, 0 },
{ "nocmp", s_tic6x_nocmp, 0 },
+ { "scomm", s_tic6x_scomm, 0 },
{ "word", cons, 4 },
+ { "ehtype", s_tic6x_ehtype, 0 },
+ { "endp", s_tic6x_endp, 0 },
+ { "handlerdata", s_tic6x_handlerdata, 0 },
+ { "personalityindex", s_tic6x_personalityindex, 0 },
+ { "personality", s_tic6x_personality, 0 },
+ { "cantunwind", s_tic6x_cantunwind, 0 },
{ 0, 0, 0 }
};
md_begin (void)
{
tic6x_opcode_id id;
+ flagword applicable;
+ segT seg;
+ subsegT subseg;
bfd_set_arch_mach (stdoutput, TARGET_ARCH, 0);
for (id = 0; id < tic6x_opcode_max; id++)
{
const char *errmsg;
- tic6x_opcode_list *opc = xmalloc (sizeof (tic6x_opcode_list));
+ tic6x_opcode_list *opc = XNEW (tic6x_opcode_list);
opc->id = id;
opc->next = hash_find (opcode_hash, tic6x_opcode_table[id].name);
!= NULL)
as_fatal ("%s", _(errmsg));
}
+
+ /* Save the current subseg so we can restore it [it's the default one and
+ we don't want the initial section to be .sbss]. */
+ seg = now_seg;
+ subseg = now_subseg;
+
+ /* The sbss section is for local .scomm symbols. */
+ sbss_section = subseg_new (".bss", 0);
+ seg_info (sbss_section)->bss = 1;
+
+ /* This is copied from perform_an_assembly_pass. */
+ applicable = bfd_applicable_section_flags (stdoutput);
+ bfd_set_section_flags (stdoutput, sbss_section, applicable & SEC_ALLOC);
+
+ subseg_set (seg, subseg);
+
+ /* We must construct a fake section similar to bfd_com_section
+ but with the name .scommon. */
+ scom_section = *bfd_com_section_ptr;
+ scom_section.name = ".scommon";
+ scom_section.output_section = & scom_section;
+ scom_section.symbol = & scom_symbol;
+ scom_section.symbol_ptr_ptr = & scom_section.symbol;
+ scom_symbol = * bfd_com_section_ptr->symbol;
+ scom_symbol.name = ".scommon";
+ scom_symbol.section = & scom_section;
}
/* Whether the current line being parsed had the "||" parallel bars. */
si = seg_info (now_seg);
list = si->tc_segment_info_data.label_list;
- si->tc_segment_info_data.label_list = xmalloc (sizeof (tic6x_label_list));
+ si->tc_segment_info_data.label_list = XNEW (tic6x_label_list);
si->tc_segment_info_data.label_list->next = list;
si->tc_segment_info_data.label_list->label = sym;
{ "dpr_hword", O_dpr_hword },
#define O_dpr_word O_md6
{ "dpr_word", O_dpr_word },
+#define O_pcr_offset O_md7
+ { "pcr_offset", O_pcr_offset }
};
/* Parse a name in some machine-specific way. Used on C6X to handle
const char *inner_name;
unsigned int i;
operatorT op = O_illegal;
- symbolS *sym;
+ symbolS *sym, *op_sym = NULL;
if (*name != '$')
return 0;
name_end = p;
skip_whitespace (p);
+ if (op == O_pcr_offset)
+ {
+ char *op_name_start, *op_name_end;
+
+ if (*p != ',')
+ {
+ *input_line_pointer = 0;
+ return 0;
+ }
+ p++;
+ skip_whitespace (p);
+
+ if (!is_name_beginner (*p))
+ {
+ *input_line_pointer = 0;
+ return 0;
+ }
+
+ op_name_start = p;
+ p++;
+ while (is_part_of_name (*p))
+ p++;
+ op_name_end = p;
+ skip_whitespace (p);
+
+ c = *op_name_end;
+ *op_name_end = 0;
+ op_sym = symbol_find_or_make (op_name_start);
+ *op_name_end = c;
+ }
+
if (*p != ')')
{
*input_line_pointer = 0;
exprP->X_op = op;
exprP->X_add_symbol = sym;
exprP->X_add_number = 0;
- exprP->X_op_symbol = NULL;
+ exprP->X_op_symbol = op_sym;
exprP->X_md = 0;
return 1;
bfd_boolean fix_adda)
{
bfd_reloc_code_real_type new_reloc = BFD_RELOC_UNUSED;
+ symbolS *subsy = NULL;
fixS *fix;
switch (exp->X_op)
}
break;
+ case O_pcr_offset:
+ subsy = exp->X_op_symbol;
+ switch (r_type)
+ {
+ case BFD_RELOC_C6000_ABS_S16:
+ case BFD_RELOC_C6000_ABS_L16:
+ new_reloc = BFD_RELOC_C6000_PCR_L16;
+ break;
+
+ case BFD_RELOC_C6000_ABS_H16:
+ new_reloc = BFD_RELOC_C6000_PCR_H16;
+ break;
+
+ default:
+ as_bad (_("$PCR_OFFSET not supported in this context"));
+ return;
+ }
+ break;
+
case O_symbol:
break;
else
fix = fix_new (frag, where, size, exp->X_add_symbol, exp->X_add_number,
pcrel, new_reloc);
+ fix->tc_fix_data.fix_subsy = subsy;
fix->tc_fix_data.fix_adda = fix_adda;
}
go through the error checking in tic6x_fix_new_exp. */
void
-tic6x_cons_fix_new (fragS *frag, int where, int size, expressionS *exp)
+tic6x_cons_fix_new (fragS *frag, int where, int size, expressionS *exp,
+ bfd_reloc_code_real_type r_type)
{
- bfd_reloc_code_real_type r_type;
-
switch (size)
{
case 1:
tic6x_init_fix_data (fixS *fixP)
{
fixP->tc_fix_data.fix_adda = FALSE;
+ fixP->tc_fix_data.fix_subsy = NULL;
}
/* Return true if the fix can be handled by GAS, false if it must
case BFD_RELOC_C6000_SBR_GOT_U15_W:
case BFD_RELOC_C6000_SBR_GOT_H16_W:
case BFD_RELOC_C6000_SBR_GOT_L16_W:
+ case BFD_RELOC_C6000_EHTYPE:
+ return 0;
+
+ case BFD_RELOC_C6000_PREL31:
+ return 0;
+
+ case BFD_RELOC_C6000_PCR_H16:
+ case BFD_RELOC_C6000_PCR_L16:
return 0;
default:
fldd = tic6x_field_from_fmt (fmt, opct->fixed_fields[fld].field_id);
if (fldd == NULL)
abort ();
- opcode_value |= opct->fixed_fields[fld].min_val << fldd->low_pos;
+ opcode_value |= opct->fixed_fields[fld].min_val << fldd->bitfields[0].low_pos;
}
}
ucexp = operands[opno].value.exp;
unsigned_constant:
if (ucexp.X_add_number < 0
- || ucexp.X_add_number >= (1 << fldd->width))
+ || ucexp.X_add_number >= (1 << fldd->bitfields[0].width))
{
if (print_errors)
as_bad (_("operand %u of '%.*s' out of range"), opno + 1,
value = 0;
/* Opcode table should not permit non-constants without
a known relocation for them. */
- if (fldd->low_pos != 7 || fldd->width != 16)
+ if (fldd->bitfields[0].low_pos != 7 || fldd->bitfields[0].width != 16)
abort ();
*fix_needed = TRUE;
*fix_exp = &operands[opno].value.exp;
}
sign_value = SEXT (operands[opno].value.exp.X_add_number);
signed_constant:
- if (sign_value < -(1 << (fldd->width - 1))
- || (sign_value >= (1 << (fldd->width - 1))))
+ if (sign_value < -(1 << (fldd->bitfields[0].width - 1))
+ || (sign_value >= (1 << (fldd->bitfields[0].width - 1))))
{
if (print_errors)
as_bad (_("operand %u of '%.*s' out of range"), opno + 1,
*ok = FALSE;
return 0;
}
- value = sign_value + (1 << (fldd->width - 1));
- value ^= (1 << (fldd->width - 1));
+ value = sign_value + (1 << (fldd->bitfields[0].width - 1));
+ value ^= (1 << (fldd->bitfields[0].width - 1));
break;
case tic6x_coding_ucst_minus_one:
if (operands[opno].value.exp.X_op != O_constant)
abort ();
if (operands[opno].value.exp.X_add_number <= 0
- || operands[opno].value.exp.X_add_number > (1 << fldd->width))
+ || operands[opno].value.exp.X_add_number > (1 << fldd->bitfields[0].width))
{
if (print_errors)
as_bad (_("operand %u of '%.*s' out of range"), opno + 1,
value = 0;
/* Opcode table should not use this encoding without a known
relocation. */
- if (fldd->low_pos != 8 || fldd->width != 15)
+ if (fldd->bitfields[0].low_pos != 8 || fldd->bitfields[0].width != 15)
abort ();
/* We do not check for offset divisibility here; such a
check is not needed at this point to encode the value,
value = 0;
/* Opcode table should not use this encoding without a
known relocation. */
- if (fldd->low_pos != 7 || fldd->width != 16)
+ if (fldd->bitfields[0].low_pos != 7 || fldd->bitfields[0].width != 16)
abort ();
*fix_needed = TRUE;
*fix_exp = &operands[opno].value.exp;
value = 0;
/* Opcode table should not use this encoding without a
known relocation. */
- if (fldd->low_pos != 7 || fldd->width != 16)
+ if (fldd->bitfields[0].low_pos != 7 || fldd->bitfields[0].width != 16)
abort ();
*fix_needed = TRUE;
*fix_exp = &operands[opno].value.exp;
*fix_needed = TRUE;
*fix_exp = &operands[opno].value.exp;
*fix_pcrel = 1;
- if (fldd->low_pos == 7 && fldd->width == 21)
+ if (fldd->bitfields[0].low_pos == 7 && fldd->bitfields[0].width == 21)
*fx_r_type = BFD_RELOC_C6000_PCR_S21;
- else if (fldd->low_pos == 16 && fldd->width == 12)
+ else if (fldd->bitfields[0].low_pos == 16 && fldd->bitfields[0].width == 12)
*fx_r_type = BFD_RELOC_C6000_PCR_S12;
- else if (fldd->low_pos == 13 && fldd->width == 10)
+ else if (fldd->bitfields[0].low_pos == 13 && fldd->bitfields[0].width == 10)
*fx_r_type = BFD_RELOC_C6000_PCR_S10;
- else if (fldd->low_pos == 16 && fldd->width == 7)
+ else if (fldd->bitfields[0].low_pos == 16 && fldd->bitfields[0].width == 7)
*fx_r_type = BFD_RELOC_C6000_PCR_S7;
else
/* Opcode table should not use this encoding without a
*fix_adda = FALSE;
break;
- case tic6x_coding_reg:
+ case tic6x_coding_regpair_lsb:
switch (operands[opno].form)
{
- case TIC6X_OP_REG:
case TIC6X_OP_REGPAIR:
value = operands[opno].value.reg.num;
break;
- case TIC6X_OP_MEM_NOUNREG:
- case TIC6X_OP_MEM_UNREG:
- value = operands[opno].value.mem.base_reg.num;
- break;
-
default:
abort ();
}
break;
- case tic6x_coding_areg:
+ case tic6x_coding_regpair_msb:
switch (operands[opno].form)
{
- case TIC6X_OP_REG:
- value = (operands[opno].value.reg.num == 15 ? 1 : 0);
- break;
-
- case TIC6X_OP_MEM_NOUNREG:
- value = (operands[opno].value.mem.base_reg.num == 15 ? 1 : 0);
+ case TIC6X_OP_REGPAIR:
+ value = operands[opno].value.reg.num + 1;
break;
default:
}
break;
- case tic6x_coding_crlo:
- if (operands[opno].form != TIC6X_OP_CTRL)
- abort ();
- value = tic6x_ctrl_table[operands[opno].value.ctrl].crlo;
- break;
+ case tic6x_coding_reg:
+ switch (operands[opno].form)
+ {
+ case TIC6X_OP_REG:
+ case TIC6X_OP_REGPAIR:
+ value = operands[opno].value.reg.num;
+ break;
+
+ case TIC6X_OP_MEM_NOUNREG:
+ case TIC6X_OP_MEM_UNREG:
+ value = operands[opno].value.mem.base_reg.num;
+ break;
+
+ default:
+ abort ();
+ }
+ break;
+
+ case tic6x_coding_areg:
+ switch (operands[opno].form)
+ {
+ case TIC6X_OP_REG:
+ value = (operands[opno].value.reg.num == 15 ? 1 : 0);
+ break;
+
+ case TIC6X_OP_MEM_NOUNREG:
+ value = (operands[opno].value.mem.base_reg.num == 15 ? 1 : 0);
+ break;
+
+ default:
+ abort ();
+ }
+ break;
+
+ case tic6x_coding_crlo:
+ if (operands[opno].form != TIC6X_OP_CTRL)
+ abort ();
+ value = tic6x_ctrl_table[operands[opno].value.ctrl].crlo;
+ break;
case tic6x_coding_crhi:
if (operands[opno].form != TIC6X_OP_CTRL)
abort ();
}
if (mem.offset.exp.X_add_number < 0
- || mem.offset.exp.X_add_number >= (1 << fldd->width) * scale)
+ || mem.offset.exp.X_add_number >= (1 << fldd->bitfields[0].width) * scale)
{
if (print_errors)
as_bad (_("offset in operand %u of '%.*s' out of range"),
if (mem.offset.exp.X_op != O_constant)
abort ();
if (mem.offset.exp.X_add_number < 0
- || mem.offset.exp.X_add_number >= (1 << fldd->width))
+ || mem.offset.exp.X_add_number >= (1 << fldd->bitfields[0].width))
{
if (print_errors)
as_bad (_("offset in operand %u of '%.*s' out of range"),
case tic6x_coding_spmask:
/* The position of such a field is hardcoded in the handling
of "||^". */
- if (fldd->low_pos != 18)
+ if (fldd->bitfields[0].low_pos != 18)
abort ();
value = 0;
for (opno = 0; opno < num_operands; opno++)
fcyc_bits = 4;
else
abort ();
- if (fcyc_bits > fldd->width)
+ if (fcyc_bits > fldd->bitfields[0].width)
abort ();
if (opct->variable_fields[fld].coding_method == tic6x_coding_fstg)
int i, t;
if (operands[opno].value.exp.X_add_number < 0
|| (operands[opno].value.exp.X_add_number
- >= (1 << (fldd->width - fcyc_bits))))
+ >= (1 << (fldd->bitfields[0].width - fcyc_bits))))
{
if (print_errors)
as_bad (_("operand %u of '%.*s' out of range"), opno + 1,
return 0;
}
value = operands[opno].value.exp.X_add_number;
- for (t = 0, i = fcyc_bits; i < fldd->width; i++)
+ for (t = 0, i = fcyc_bits; i < fldd->bitfields[0].width; i++)
{
t = (t << 1) | (value & 1);
value >>= 1;
return 0;
}
- opcode_value |= value << fldd->low_pos;
+ opcode_value |= value << fldd->bitfields[0].low_pos;
}
if (this_line_creg)
if (z == NULL)
abort ();
- opcode_value |= this_line_creg << creg->low_pos;
- opcode_value |= this_line_z << z->low_pos;
+ opcode_value |= this_line_creg << creg->bitfields[0].low_pos;
+ opcode_value |= this_line_z << z->bitfields[0].low_pos;
}
*ok = TRUE;
/* If no .arch directives or -march options have been seen, we are
assessing instruction validity based on the C674X default, so set
the attribute accordingly. */
- if (tic6x_arch_attribute == C6XABI_Tag_CPU_arch_none)
- tic6x_arch_attribute = C6XABI_Tag_CPU_arch_C674X;
+ if (tic6x_arch_attribute == C6XABI_Tag_ISA_none)
+ tic6x_arch_attribute = C6XABI_Tag_ISA_C674X;
/* Reset global settings for parallel bars and predicates now to
avoid extra errors if there are problems with this opcode. */
for (opc = opc_list; opc; opc = opc->next)
max_matching_opcodes++;
num_matching_opcodes = 0;
- opcm = xmalloc (max_matching_opcodes * sizeof (*opcm));
+ opcm = XNEWVEC (tic6x_opcode_id, max_matching_opcodes);
max_num_operands = 0;
ok_this_arch = FALSE;
ok_this_fu = FALSE;
switch (fixP->fx_r_type)
{
case BFD_RELOC_NONE:
+ case BFD_RELOC_C6000_EHTYPE:
/* Force output to the object file. */
fixP->fx_done = 0;
break;
if (value < -0x80 || value > 0xff)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("value too large for 1-byte field"));
- md_number_to_chars (buf, value, 1);
+ *buf = value;
}
break;
abort ();
break;
+ case BFD_RELOC_C6000_PCR_H16:
+ case BFD_RELOC_C6000_PCR_L16:
+ if (fixP->fx_done || !seg->use_rela_p)
+ {
+ offsetT newval = md_chars_to_number (buf, 4);
+ int shift = fixP->fx_r_type == BFD_RELOC_C6000_PCR_H16 ? 16 : 0;
+
+ MODIFY_VALUE (newval, value, shift, 7, 16);
+
+ md_number_to_chars (buf, newval, 4);
+ }
+ break;
+
case BFD_RELOC_C6000_SBR_U15_B:
if (fixP->fx_done || !seg->use_rela_p)
{
}
break;
+ case BFD_RELOC_C6000_PREL31:
+ /* Force output to the object file. */
+ fixP->fx_done = 0;
+ break;
+
default:
abort ();
}
/* Convert a floating-point number to target (IEEE) format. */
-char *
+const char *
md_atof (int type, char *litP, int *sizeP)
{
return ieee_md_atof (type, litP, sizeP, target_big_endian);
static void
tic6x_set_attributes (void)
{
- if (tic6x_arch_attribute == C6XABI_Tag_CPU_arch_none)
- tic6x_arch_attribute = C6XABI_Tag_CPU_arch_C674X;
+ if (tic6x_arch_attribute == C6XABI_Tag_ISA_none)
+ tic6x_arch_attribute = C6XABI_Tag_ISA_C674X;
- tic6x_set_attribute_int (Tag_C6XABI_Tag_CPU_arch, tic6x_arch_attribute);
+ tic6x_set_attribute_int (Tag_ISA, tic6x_arch_attribute);
+ tic6x_set_attribute_int (Tag_ABI_DSBT, tic6x_dsbt);
+ tic6x_set_attribute_int (Tag_ABI_PID, tic6x_pid);
+ tic6x_set_attribute_int (Tag_ABI_PIC, tic6x_pic);
}
/* Do machine-dependent manipulations of the frag chains after all
/* Round up section sizes to ensure that text sections consist of
whole fetch packets. */
int align = bfd_get_section_alignment (stdoutput, segment);
- return ((size + (1 << align) - 1) & ((valueT) -1 << align));
+ return ((size + (1 << align) - 1) & (-((valueT) 1 << align)));
}
/* No special undefined symbol handling needed for now. */
tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp)
{
arelent *reloc;
+ asymbol *symbol;
bfd_reloc_code_real_type r_type;
- reloc = xmalloc (sizeof (arelent));
- reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
- *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ reloc = XNEW (arelent);
+ reloc->sym_ptr_ptr = XNEW (asymbol *);
+ symbol = symbol_get_bfdsym (fixp->fx_addsy);
+ *reloc->sym_ptr_ptr = symbol;
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
reloc->addend = (tic6x_generate_rela ? fixp->fx_offset : 0);
r_type = fixp->fx_r_type;
/* Correct for adjustments bfd_install_relocation will make. */
if (reloc->howto->pcrel_offset && reloc->howto->partial_inplace)
- reloc->addend += reloc->address;
-
+ {
+ reloc->addend += reloc->address;
+ if (!bfd_is_com_section (symbol))
+ reloc->addend -= symbol->value;
+ }
+ if (r_type == BFD_RELOC_C6000_PCR_H16
+ || r_type == BFD_RELOC_C6000_PCR_L16)
+ {
+ symbolS *t = fixp->tc_fix_data.fix_subsy;
+ segT sub_symbol_segment;
+
+ resolve_symbol_value (t);
+ sub_symbol_segment = S_GET_SEGMENT (t);
+ if (sub_symbol_segment == undefined_section)
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("undefined symbol %s in PCR relocation"),
+ S_GET_NAME (t));
+ else
+ {
+ reloc->addend = reloc->address & ~0x1F;
+ reloc->addend -= S_GET_VALUE (t);
+ }
+ }
return reloc;
}
+
+/* Convert REGNAME to a DWARF-2 register number. */
+
+int
+tic6x_regname_to_dw2regnum (char *regname)
+{
+ bfd_boolean reg_ok;
+ tic6x_register reg;
+ char *rq = regname;
+
+ reg_ok = tic6x_parse_register (&rq, ®);
+
+ if (!reg_ok)
+ return -1;
+
+ switch (reg.side)
+ {
+ case 1: /* A regs. */
+ if (reg.num < 16)
+ return reg.num;
+ else if (reg.num < 32)
+ return (reg.num - 16) + 37;
+ else
+ return -1;
+
+ case 2: /* B regs. */
+ if (reg.num < 16)
+ return reg.num + 16;
+ else if (reg.num < 32)
+ return (reg.num - 16) + 53;
+ else
+ return -1;
+
+ default:
+ return -1;
+ }
+}
+
+/* Initialize the DWARF-2 unwind information for this procedure. */
+
+void
+tic6x_frame_initial_instructions (void)
+{
+ /* CFA is initial stack pointer (B15). */
+ cfi_add_CFA_def_cfa (31, 0);
+}
+
+/* Start an exception table entry. If idx is nonzero this is an index table
+ entry. */
+
+static void
+tic6x_start_unwind_section (const segT text_seg, int idx)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+ const char * text_name;
+ const char * prefix;
+ const char * prefix_once;
+ const char * group_name;
+ size_t prefix_len;
+ size_t text_len;
+ char * sec_name;
+ size_t sec_name_len;
+ int type;
+ int flags;
+ int linkonce;
+
+ if (idx)
+ {
+ prefix = ELF_STRING_C6000_unwind;
+ prefix_once = ELF_STRING_C6000_unwind_once;
+ type = SHT_C6000_UNWIND;
+ }
+ else
+ {
+ prefix = ELF_STRING_C6000_unwind_info;
+ prefix_once = ELF_STRING_C6000_unwind_info_once;
+ type = SHT_PROGBITS;
+ }
+
+ text_name = segment_name (text_seg);
+ if (streq (text_name, ".text"))
+ text_name = "";
+
+ if (strncmp (text_name, ".gnu.linkonce.t.",
+ strlen (".gnu.linkonce.t.")) == 0)
+ {
+ prefix = prefix_once;
+ text_name += strlen (".gnu.linkonce.t.");
+ }
+
+ prefix_len = strlen (prefix);
+ text_len = strlen (text_name);
+ sec_name_len = prefix_len + text_len;
+ sec_name = XNEWVEC (char, sec_name_len + 1);
+ memcpy (sec_name, prefix, prefix_len);
+ memcpy (sec_name + prefix_len, text_name, text_len);
+ sec_name[prefix_len + text_len] = '\0';
+
+ flags = SHF_ALLOC;
+ linkonce = 0;
+ group_name = 0;
+
+ /* Handle COMDAT group. */
+ if (prefix != prefix_once && (text_seg->flags & SEC_LINK_ONCE) != 0)
+ {
+ group_name = elf_group_name (text_seg);
+ if (group_name == NULL)
+ {
+ as_bad (_("group section `%s' has no group signature"),
+ segment_name (text_seg));
+ ignore_rest_of_line ();
+ return;
+ }
+ flags |= SHF_GROUP;
+ linkonce = 1;
+ }
+
+ obj_elf_change_section (sec_name, type, 0, flags, 0, group_name,
+ linkonce, 0);
+
+ /* Set the section link for index tables. */
+ if (idx)
+ elf_linked_to_section (now_seg) = text_seg;
+
+ seg_info (now_seg)->tc_segment_info_data.text_unwind = unwind;
+}
+
+
+static const int
+tic6x_unwind_frame_regs[TIC6X_NUM_UNWIND_REGS] =
+/* A15 B15 B14 B13 B12 B11 B10 B3 A14 A13 A12 A11 A10. */
+ { 15, 31, 30, 29, 28, 27, 26, 19, 14, 13, 12, 11, 10 };
+
+/* Register save offsets for __c6xabi_push_rts. */
+static const int
+tic6x_pop_rts_offset_little[TIC6X_NUM_UNWIND_REGS] =
+/* A15 B15 B14 B13 B12 B11 B10 B3 A14 A13 A12 A11 A10. */
+ { -1, 1, 0, -3, -4, -7, -8,-11, -2, -5, -6, -9,-10};
+
+static const int
+tic6x_pop_rts_offset_big[TIC6X_NUM_UNWIND_REGS] =
+/* A15 B15 B14 B13 B12 B11 B10 B3 A14 A13 A12 A11 A10. */
+ { -2, 1, 0, -4, -3, -8, -7,-12, -1, -6, -5,-10, -9};
+
+/* Map from dwarf register number to unwind frame register number. */
+static int
+tic6x_unwind_reg_from_dwarf (int dwarf)
+{
+ int reg;
+
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ {
+ if (tic6x_unwind_frame_regs[reg] == dwarf)
+ return reg;
+ }
+
+ return -1;
+}
+
+/* Unwinding bytecode definitions. */
+#define UNWIND_OP_ADD_SP 0x00
+#define UNWIND_OP_ADD_SP2 0xd2
+#define UNWIND_OP2_POP 0x8000
+#define UNWIND_OP2_POP_COMPACT 0xa000
+#define UNWIND_OP_POP_REG 0xc0
+#define UNWIND_OP_MV_FP 0xd0
+#define UNWIND_OP_POP_RTS 0xd1
+#define UNWIND_OP_RET 0xe0
+
+/* Maximum stack adjustment for __c6xabi_unwind_cpp_pr3/4 */
+#define MAX_COMPACT_SP_OFFSET (0x7f << 3)
+
+static void
+tic6x_flush_unwind_word (valueT data)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+ char *ptr;
+
+ /* Create EXTAB entry if it does not exist. */
+ if (unwind->table_entry == NULL)
+ {
+ tic6x_start_unwind_section (unwind->saved_seg, 0);
+ frag_align (2, 0, 0);
+ record_alignment (now_seg, 2);
+ unwind->table_entry = expr_build_dot ();
+ ptr = frag_more (4);
+ unwind->frag_start = ptr;
+ }
+ else
+ {
+ /* Append additional word of data. */
+ ptr = frag_more (4);
+ }
+
+ md_number_to_chars (ptr, data, 4);
+}
+
+/* Add a single byte of unwinding data. */
+
+static void
+tic6x_unwind_byte (int byte)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+
+ unwind->data_bytes++;
+ /* Only flush the first word after we know multiple words are required. */
+ if (unwind->data_bytes == 5)
+ {
+ if (unwind->personality_index == -1)
+ {
+ /* At this point we know we are too big for pr0. */
+ unwind->personality_index = 1;
+ tic6x_flush_unwind_word (0x81000000 | ((unwind->data >> 8) & 0xffff));
+ unwind->data = ((unwind->data & 0xff) << 8) | byte;
+ unwind->data_bytes++;
+ }
+ else
+ {
+ tic6x_flush_unwind_word (unwind->data);
+ unwind->data = byte;
+ }
+ }
+ else
+ {
+ unwind->data = (unwind->data << 8) | byte;
+ if ((unwind->data_bytes & 3) == 0 && unwind->data_bytes > 4)
+ {
+ tic6x_flush_unwind_word (unwind->data);
+ unwind->data = 0;
+ }
+ }
+}
+
+/* Add a two-byte unwinding opcode. */
+static void
+tic6x_unwind_2byte (int bytes)
+{
+ tic6x_unwind_byte (bytes >> 8);
+ tic6x_unwind_byte (bytes & 0xff);
+}
+
+static void
+tic6x_unwind_uleb (offsetT offset)
+{
+ while (offset > 0x7f)
+ {
+ tic6x_unwind_byte ((offset & 0x7f) | 0x80);
+ offset >>= 7;
+ }
+ tic6x_unwind_byte (offset);
+}
+
+void
+tic6x_cfi_startproc (void)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+
+ unwind->personality_index = -1;
+ unwind->personality_routine = NULL;
+ if (unwind->table_entry)
+ as_bad (_("missing .endp before .cfi_startproc"));
+
+ unwind->table_entry = NULL;
+ unwind->data_bytes = -1;
+}
+
+static void
+tic6x_output_exidx_entry (void)
+{
+ char *ptr;
+ long where;
+ unsigned int marked_pr_dependency;
+ segT old_seg;
+ subsegT old_subseg;
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+
+ old_seg = now_seg;
+ old_subseg = now_subseg;
+
+ /* Add index table entry. This is two words. */
+ tic6x_start_unwind_section (unwind->saved_seg, 1);
+ frag_align (2, 0, 0);
+ record_alignment (now_seg, 2);
+
+ ptr = frag_more (8);
+ memset (ptr, 0, 8);
+ where = frag_now_fix () - 8;
+
+ /* Self relative offset of the function start. */
+ fix_new (frag_now, where, 4, unwind->function_start, 0, 1,
+ BFD_RELOC_C6000_PREL31);
+
+ /* Indicate dependency on ABI-defined personality routines to the
+ linker, if it hasn't been done already. */
+ marked_pr_dependency
+ = seg_info (now_seg)->tc_segment_info_data.marked_pr_dependency;
+ if (unwind->personality_index >= 0 && unwind->personality_index < 5
+ && !(marked_pr_dependency & (1 << unwind->personality_index)))
+ {
+ static const char *const name[] =
+ {
+ "__c6xabi_unwind_cpp_pr0",
+ "__c6xabi_unwind_cpp_pr1",
+ "__c6xabi_unwind_cpp_pr2",
+ "__c6xabi_unwind_cpp_pr3",
+ "__c6xabi_unwind_cpp_pr4"
+ };
+ symbolS *pr = symbol_find_or_make (name[unwind->personality_index]);
+ fix_new (frag_now, where, 0, pr, 0, 1, BFD_RELOC_NONE);
+ seg_info (now_seg)->tc_segment_info_data.marked_pr_dependency
+ |= 1 << unwind->personality_index;
+ }
+
+ if (unwind->table_entry)
+ {
+ /* Self relative offset of the table entry. */
+ fix_new (frag_now, where + 4, 4, unwind->table_entry, 0, 1,
+ BFD_RELOC_C6000_PREL31);
+ }
+ else
+ {
+ /* Inline exception table entry. */
+ md_number_to_chars (ptr + 4, unwind->data, 4);
+ }
+
+ /* Restore the original section. */
+ subseg_set (old_seg, old_subseg);
+}
+
+static void
+tic6x_output_unwinding (bfd_boolean need_extab)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+ unsigned safe_mask = unwind->safe_mask;
+ unsigned compact_mask = unwind->compact_mask;
+ unsigned reg_saved_mask = unwind->reg_saved_mask;
+ offsetT cfa_offset = unwind->cfa_offset;
+ long where;
+ int reg;
+
+ if (unwind->personality_index == -2)
+ {
+ /* Function can not be unwound. */
+ unwind->data = 1;
+ tic6x_output_exidx_entry ();
+ return;
+ }
+
+ if (unwind->personality_index == -1 && unwind->personality_routine == NULL)
+ {
+ /* Auto-select a personality routine if none specified. */
+ if (reg_saved_mask || cfa_offset >= MAX_COMPACT_SP_OFFSET)
+ unwind->personality_index = -1;
+ else if (safe_mask)
+ unwind->personality_index = 3;
+ else
+ unwind->personality_index = 4;
+ }
+
+ /* Calculate unwinding opcodes, and emit to EXTAB if necessary. */
+ unwind->table_entry = NULL;
+ if (unwind->personality_index == 3 || unwind->personality_index == 4)
+ {
+ if (cfa_offset >= MAX_COMPACT_SP_OFFSET)
+ {
+ as_bad (_("stack pointer offset too large for personality routine"));
+ return;
+ }
+ if (reg_saved_mask
+ || (unwind->personality_index == 3 && compact_mask != 0)
+ || (unwind->personality_index == 4 && safe_mask != 0))
+ {
+ as_bad (_("stack frame layout does not match personality routine"));
+ return;
+ }
+
+ unwind->data = (1u << 31) | (unwind->personality_index << 24);
+ if (unwind->cfa_reg == 15)
+ unwind->data |= 0x7f << 17;
+ else
+ unwind->data |= cfa_offset << (17 - 3);
+
+ if (unwind->personality_index == 3)
+ unwind->data |= safe_mask << 4;
+ else
+ unwind->data |= compact_mask << 4;
+ unwind->data |= unwind->return_reg;
+ unwind->data_bytes = 4;
+ }
+ else
+ {
+ if (unwind->personality_routine)
+ {
+ unwind->data = 0;
+ unwind->data_bytes = 5;
+ tic6x_flush_unwind_word (0);
+ /* First word is personality routine. */
+ where = frag_now_fix () - 4;
+ fix_new (frag_now, where, 4, unwind->personality_routine, 0, 1,
+ BFD_RELOC_C6000_PREL31);
+ }
+ else if (unwind->personality_index > 0)
+ {
+ unwind->data = 0x8000 | (unwind->personality_index << 8);
+ unwind->data_bytes = 2;
+ }
+ else /* pr0 or undecided */
+ {
+ unwind->data = 0x80;
+ unwind->data_bytes = 1;
+ }
+
+ if (unwind->return_reg != UNWIND_B3)
+ {
+ tic6x_unwind_byte (UNWIND_OP_RET | unwind->return_reg);
+ }
+
+ if (unwind->cfa_reg == 15)
+ {
+ tic6x_unwind_byte (UNWIND_OP_MV_FP);
+ }
+ else if (cfa_offset != 0)
+ {
+ cfa_offset >>= 3;
+ if (cfa_offset > 0x80)
+ {
+ tic6x_unwind_byte (UNWIND_OP_ADD_SP2);
+ tic6x_unwind_uleb (cfa_offset - 0x81);
+ }
+ else if (cfa_offset > 0x40)
+ {
+ tic6x_unwind_byte (UNWIND_OP_ADD_SP | 0x3f);
+ tic6x_unwind_byte (UNWIND_OP_ADD_SP | (cfa_offset - 0x40));
+ }
+ else
+ {
+ tic6x_unwind_byte (UNWIND_OP_ADD_SP | (cfa_offset - 1));
+ }
+ }
+
+ if (safe_mask)
+ tic6x_unwind_2byte (UNWIND_OP2_POP | unwind->safe_mask);
+ else if (unwind->pop_rts)
+ tic6x_unwind_byte (UNWIND_OP_POP_RTS);
+ else if (compact_mask)
+ tic6x_unwind_2byte (UNWIND_OP2_POP_COMPACT | unwind->compact_mask);
+ else if (reg_saved_mask)
+ {
+ offsetT cur_offset;
+ int val;
+ int last_val;
+
+ tic6x_unwind_byte (UNWIND_OP_POP_REG | unwind->saved_reg_count);
+ last_val = 0;
+ for (cur_offset = 0; unwind->saved_reg_count > 0; cur_offset -= 4)
+ {
+ val = 0xf;
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ {
+ if (!unwind->reg_saved[reg])
+ continue;
+
+ if (unwind->reg_offset[reg] == cur_offset)
+ {
+ unwind->saved_reg_count--;
+ val = reg;
+ break;
+ }
+ }
+ if ((cur_offset & 4) == 4)
+ tic6x_unwind_byte ((last_val << 4) | val);
+ else
+ last_val = val;
+ }
+ if ((cur_offset & 4) == 4)
+ tic6x_unwind_byte ((last_val << 4) | 0xf);
+ }
+
+ /* Pad with RETURN opcodes. */
+ while ((unwind->data_bytes & 3) != 0)
+ tic6x_unwind_byte (UNWIND_OP_RET | UNWIND_B3);
+
+ if (unwind->personality_index == -1 && unwind->personality_routine == NULL)
+ unwind->personality_index = 0;
+ }
+
+ /* Force creation of an EXTAB entry if an LSDA is required. */
+ if (need_extab && !unwind->table_entry)
+ {
+ if (unwind->data_bytes != 4)
+ abort ();
+
+ tic6x_flush_unwind_word (unwind->data);
+ }
+ else if (unwind->table_entry && !need_extab)
+ {
+ /* Add an empty descriptor if there is no user-specified data. */
+ char *ptr = frag_more (4);
+ md_number_to_chars (ptr, 0, 4);
+ }
+
+ /* Fill in length of unwinding bytecode. */
+ if (unwind->table_entry)
+ {
+ valueT tmp;
+ if (unwind->data_bytes > 0x400)
+ as_bad (_("too many unwinding instructions"));
+
+ if (unwind->personality_index == -1)
+ {
+ tmp = md_chars_to_number (unwind->frag_start + 4, 4);
+ tmp |= ((unwind->data_bytes - 8) >> 2) << 24;
+ md_number_to_chars (unwind->frag_start + 4, tmp, 4);
+ }
+ else if (unwind->personality_index == 1 || unwind->personality_index == 2)
+ {
+ tmp = md_chars_to_number (unwind->frag_start, 4);
+ tmp |= ((unwind->data_bytes - 4) >> 2) << 16;
+ md_number_to_chars (unwind->frag_start, tmp, 4);
+ }
+ }
+ tic6x_output_exidx_entry ();
+}
+
+/* FIXME: This will get horribly confused if cfi directives are emitted for
+ function epilogue. */
+void
+tic6x_cfi_endproc (struct fde_entry *fde)
+{
+ tic6x_unwind_info *unwind = tic6x_get_unwind ();
+ struct cfi_insn_data *insn;
+ int reg;
+ unsigned safe_mask = 0;
+ unsigned compact_mask = 0;
+ unsigned reg_saved_mask = 0;
+ offsetT cfa_offset = 0;
+ offsetT save_offset = 0;
+
+ unwind->cfa_reg = 31;
+ unwind->return_reg = UNWIND_B3;
+ unwind->saved_reg_count = 0;
+ unwind->pop_rts = FALSE;
+
+ unwind->saved_seg = now_seg;
+ unwind->saved_subseg = now_subseg;
+
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ unwind->reg_saved[reg] = FALSE;
+
+ /* Scan FDE instructions to build up stack frame layout. */
+ for (insn = fde->data; insn; insn = insn->next)
+ {
+ switch (insn->insn)
+ {
+ case DW_CFA_advance_loc:
+ break;
+
+ case DW_CFA_def_cfa:
+ unwind->cfa_reg = insn->u.ri.reg;
+ cfa_offset = insn->u.ri.offset;
+ break;
+
+ case DW_CFA_def_cfa_register:
+ unwind->cfa_reg = insn->u.r;
+ break;
+
+ case DW_CFA_def_cfa_offset:
+ cfa_offset = insn->u.i;
+ break;
+
+ case DW_CFA_undefined:
+ case DW_CFA_same_value:
+ reg = tic6x_unwind_reg_from_dwarf (insn->u.r);
+ if (reg >= 0)
+ unwind->reg_saved[reg] = FALSE;
+ break;
+
+ case DW_CFA_offset:
+ reg = tic6x_unwind_reg_from_dwarf (insn->u.ri.reg);
+ if (reg < 0)
+ {
+ as_bad (_("unable to generate unwinding opcode for reg %d"),
+ insn->u.ri.reg);
+ return;
+ }
+ unwind->reg_saved[reg] = TRUE;
+ unwind->reg_offset[reg] = insn->u.ri.offset;
+ if (insn->u.ri.reg == UNWIND_B3)
+ unwind->return_reg = UNWIND_B3;
+ break;
+
+ case DW_CFA_register:
+ if (insn->u.rr.reg1 != 19)
+ {
+ as_bad (_("unable to generate unwinding opcode for reg %d"),
+ insn->u.rr.reg1);
+ return;
+ }
+
+ reg = tic6x_unwind_reg_from_dwarf (insn->u.rr.reg2);
+ if (reg < 0)
+ {
+ as_bad (_("unable to generate unwinding opcode for reg %d"),
+ insn->u.rr.reg2);
+ return;
+ }
+
+ unwind->return_reg = reg;
+ unwind->reg_saved[UNWIND_B3] = FALSE;
+ if (unwind->reg_saved[reg])
+ {
+ as_bad (_("unable to restore return address from "
+ "previously restored reg"));
+ return;
+ }
+ break;
+
+ case DW_CFA_restore:
+ case DW_CFA_remember_state:
+ case DW_CFA_restore_state:
+ case DW_CFA_GNU_window_save:
+ case CFI_escape:
+ case CFI_val_encoded_addr:
+ as_bad (_("unhandled CFA insn for unwinding (%d)"), insn->insn);
+ break;
+
+ default:
+ abort ();
+ }
+ }
+
+ if (unwind->cfa_reg != 15 && unwind->cfa_reg != 31)
+ {
+ as_bad (_("unable to generate unwinding opcode for frame pointer reg %d"),
+ unwind->cfa_reg);
+ return;
+ }
+
+ if (unwind->cfa_reg == 15)
+ {
+ if (cfa_offset != 0)
+ {
+ as_bad (_("unable to generate unwinding opcode for "
+ "frame pointer offset"));
+ return;
+ }
+ }
+ else
+ {
+ if ((cfa_offset & 7) != 0)
+ {
+ as_bad (_("unwound stack pointer not doubleword aligned"));
+ return;
+ }
+ }
+
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ {
+ if (unwind->reg_saved[reg])
+ reg_saved_mask |= 1 << (TIC6X_NUM_UNWIND_REGS - (reg + 1));
+ }
+
+ /* Check for standard "safe debug" frame layout */
+ if (reg_saved_mask)
+ {
+ save_offset = 0;
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ {
+ if (!unwind->reg_saved[reg])
+ continue;
+
+ if (target_big_endian
+ && reg < TIC6X_NUM_UNWIND_REGS - 1
+ && unwind->reg_saved[reg + 1]
+ && tic6x_unwind_frame_regs[reg]
+ == tic6x_unwind_frame_regs[reg + 1] + 1
+ && (tic6x_unwind_frame_regs[reg] & 1) == 1
+ && (save_offset & 4) == 4)
+ {
+ /* Swapped pair */
+ if (save_offset != unwind->reg_offset[reg + 1]
+ || save_offset - 4 != unwind->reg_offset[reg])
+ break;
+ save_offset -= 8;
+ reg++;
+ }
+ else
+ {
+ if (save_offset != unwind->reg_offset[reg])
+ break;
+ save_offset -= 4;
+ }
+ }
+ if (reg == TIC6X_NUM_UNWIND_REGS)
+ {
+ safe_mask = reg_saved_mask;
+ reg_saved_mask = 0;
+ }
+ }
+
+ /* Check for compact frame layout. */
+ if (reg_saved_mask)
+ {
+ save_offset = 0;
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ {
+ int reg2;
+
+ if (!unwind->reg_saved[reg])
+ continue;
+
+ if (reg < TIC6X_NUM_UNWIND_REGS - 1)
+ {
+ reg2 = reg + 1;
+
+ if (!unwind->reg_saved[reg2]
+ || tic6x_unwind_frame_regs[reg]
+ != tic6x_unwind_frame_regs[reg2] + 1
+ || (tic6x_unwind_frame_regs[reg2] & 1) != 0
+ || save_offset == 0)
+ reg2 = -1;
+ }
+ else
+ reg2 = -1;
+
+ if (reg2 >= 0)
+ {
+ int high_offset;
+ if (target_big_endian)
+ high_offset = 4; /* lower address = positive stack offset. */
+ else
+ high_offset = 0;
+
+ if (save_offset + 4 - high_offset != unwind->reg_offset[reg]
+ || save_offset + high_offset != unwind->reg_offset[reg2])
+ {
+ break;
+ }
+ reg++;
+ }
+ else
+ {
+ if (save_offset != unwind->reg_offset[reg])
+ break;
+ }
+ save_offset -= 8;
+ }
+
+ if (reg == TIC6X_NUM_UNWIND_REGS)
+ {
+ compact_mask = reg_saved_mask;
+ reg_saved_mask = 0;
+ }
+ }
+
+ /* Check for __c6xabi_pop_rts format */
+ if (reg_saved_mask == 0x17ff)
+ {
+ const int *pop_rts_offset = target_big_endian
+ ? tic6x_pop_rts_offset_big
+ : tic6x_pop_rts_offset_little;
+
+ save_offset = 0;
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ {
+ if (reg == UNWIND_B15)
+ continue;
+
+ if (unwind->reg_offset[reg] != pop_rts_offset[reg] * 4)
+ break;
+ }
+
+ if (reg == TIC6X_NUM_UNWIND_REGS)
+ {
+ unwind->pop_rts = TRUE;
+ reg_saved_mask = 0;
+ }
+ }
+ /* If all else fails then describe the frame manually. */
+ if (reg_saved_mask)
+ {
+ save_offset = 0;
+
+ for (reg = 0; reg < TIC6X_NUM_UNWIND_REGS; reg++)
+ {
+ if (!unwind->reg_saved[reg])
+ continue;
+
+ unwind->saved_reg_count++;
+ /* Encoding uses 4 bits per word, so size of unwinding opcode data
+ limits the save area size. The exact cap will be figured out
+ later due to overflow, the 0x800 here is just a quick sanity
+ check to weed out obviously excessive offsets. */
+ if (unwind->reg_offset[reg] > 0 || unwind->reg_offset[reg] < -0x800
+ || (unwind->reg_offset[reg] & 3) != 0)
+ {
+ as_bad (_("stack frame layout too complex for unwinder"));
+ return;
+ }
+
+ if (unwind->reg_offset[reg] < save_offset)
+ save_offset = unwind->reg_offset[reg] - 4;
+ }
+ }
+
+ /* Align to 8-byte boundary (stack grows towards negative offsets). */
+ save_offset &= ~7;
+
+ if (unwind->cfa_reg == 31 && !reg_saved_mask)
+ {
+ cfa_offset += save_offset;
+ if (cfa_offset < 0)
+ {
+ as_bad (_("unwound frame has negative size"));
+ return;
+ }
+ }
+
+ unwind->safe_mask = safe_mask;
+ unwind->compact_mask = compact_mask;
+ unwind->reg_saved_mask = reg_saved_mask;
+ unwind->cfa_offset = cfa_offset;
+ unwind->function_start = fde->start_address;
+}