/* tc-xtensa.c -- Assemble Xtensa instructions.
- Copyright 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+ Copyright 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
#include "tc-xtensa.h"
#include "subsegs.h"
#include "xtensa-relax.h"
-#include "xtensa-istack.h"
#include "dwarf2dbg.h"
+#include "xtensa-istack.h"
#include "struc-symbol.h"
#include "xtensa-config.h"
static vliw_insn cur_vinsn;
+unsigned xtensa_num_pipe_stages;
unsigned xtensa_fetch_width = XCHAL_INST_FETCH_WIDTH;
static enum debug_info_type xt_saved_debug_type = DEBUG_NONE;
/* Instruction only properties about code. */
#define XTENSA_PROP_INSN_NO_DENSITY 0x00000040
#define XTENSA_PROP_INSN_NO_REORDER 0x00000080
-#define XTENSA_PROP_INSN_NO_TRANSFORM 0x00000100
+/* Historically, NO_TRANSFORM was a property of instructions,
+ but it should apply to literals under certain circumstances. */
+#define XTENSA_PROP_NO_TRANSFORM 0x00000100
/* Branch target alignment information. This transmits information
to the linker optimization about the priority of aligning a
unsigned is_data : 1;
unsigned is_unreachable : 1;
+ /* is_specific_opcode implies no_transform. */
+ unsigned is_no_transform : 1;
+
struct
{
unsigned is_loop_target : 1;
unsigned is_no_density : 1;
/* no_longcalls flag does not need to be placed in the object file. */
- /* is_specific_opcode implies no_transform. */
- unsigned is_no_transform : 1;
unsigned is_no_reorder : 1;
#define O_pltrel O_md1 /* like O_symbol but use a PLT reloc */
#define O_hi16 O_md2 /* use high 16 bits of symbolic value */
#define O_lo16 O_md3 /* use low 16 bits of symbolic value */
+#define O_pcrel O_md4 /* value is a PC-relative offset */
+
+struct suffix_reloc_map
+{
+ char *suffix;
+ int length;
+ bfd_reloc_code_real_type reloc;
+ unsigned char operator;
+};
+
+#define SUFFIX_MAP(str, reloc, op) { str, sizeof (str) - 1, reloc, op }
+
+static struct suffix_reloc_map suffix_relocs[] =
+{
+ SUFFIX_MAP ("l", BFD_RELOC_LO16, O_lo16),
+ SUFFIX_MAP ("h", BFD_RELOC_HI16, O_hi16),
+ SUFFIX_MAP ("plt", BFD_RELOC_XTENSA_PLT, O_pltrel),
+ SUFFIX_MAP ("pcrel", BFD_RELOC_32_PCREL, O_pcrel),
+ { (char *) 0, 0, BFD_RELOC_UNUSED, 0 }
+};
/* Directives. */
static void xtensa_literal_pseudo (int);
static void xtensa_frequency_pseudo (int);
static void xtensa_elf_cons (int);
+static void xtensa_leb128 (int);
/* Parsing and Idiom Translation. */
static xtensa_opcode xtensa_callx12_opcode;
static xtensa_opcode xtensa_const16_opcode;
static xtensa_opcode xtensa_entry_opcode;
+static xtensa_opcode xtensa_extui_opcode;
static xtensa_opcode xtensa_movi_opcode;
static xtensa_opcode xtensa_movi_n_opcode;
static xtensa_opcode xtensa_isync_opcode;
}
-/* The "loops_ok" argument is provided to allow ignoring labels that
- define loop ends. This fixes a bug where the NOPs to align a
- loop opcode were included in a previous zero-cost loop:
-
- loop a0, loopend
- <loop1 body>
- loopend:
-
- loop a2, loopend2
- <loop2 body>
-
- would become:
-
- loop a0, loopend
- <loop1 body>
- nop.n <===== bad!
- loopend:
-
- loop a2, loopend2
- <loop2 body>
-
- This argument is used to prevent moving the NOP to before the
- loop-end label, which is what you want in this special case. */
-
static void
-xtensa_move_labels (fragS *new_frag, valueT new_offset, bfd_boolean loops_ok)
+xtensa_move_labels (fragS *new_frag, valueT new_offset)
{
sym_list *lit;
for (lit = insn_labels; lit; lit = lit->next)
{
symbolS *lit_sym = lit->sym;
- if (loops_ok || ! symbol_get_tc (lit_sym)->is_loop_target)
- {
- S_SET_VALUE (lit_sym, new_offset);
- symbol_set_frag (lit_sym, new_frag);
- }
+ S_SET_VALUE (lit_sym, new_offset);
+ symbol_set_frag (lit_sym, new_frag);
}
}
{ "frame", s_ignore, 0 }, /* Formerly used for STABS debugging. */
{ "long", xtensa_elf_cons, 4 },
{ "word", xtensa_elf_cons, 4 },
+ { "4byte", xtensa_elf_cons, 4 },
{ "short", xtensa_elf_cons, 2 },
+ { "2byte", xtensa_elf_cons, 2 },
+ { "sleb128", xtensa_leb128, 1},
+ { "uleb128", xtensa_leb128, 0},
{ "begin", xtensa_begin_directive, 0 },
{ "end", xtensa_end_directive, 0 },
{ "literal", xtensa_literal_pseudo, 0 },
char *p = frag_more ((int) nbytes);
xtensa_set_frag_assembly_state (frag_now);
fix_new_exp (frag_now, p - frag_now->fr_literal,
- nbytes, &exp, 0, reloc);
+ nbytes, &exp, reloc_howto->pc_relative, reloc);
}
}
else
- emit_expr (&exp, (unsigned int) nbytes);
+ {
+ xtensa_set_frag_assembly_state (frag_now);
+ emit_expr (&exp, (unsigned int) nbytes);
+ }
}
while (*input_line_pointer++ == ',');
demand_empty_rest_of_line ();
}
+static bfd_boolean is_leb128_expr;
+
+static void
+xtensa_leb128 (int sign)
+{
+ is_leb128_expr = TRUE;
+ s_leb128 (sign);
+ is_leb128_expr = FALSE;
+}
+
\f
/* Parsing and Idiom Translation. */
static bfd_reloc_code_real_type
xtensa_elf_suffix (char **str_p, expressionS *exp_p)
{
- struct map_bfd
- {
- char *string;
- int length;
- bfd_reloc_code_real_type reloc;
- };
-
char ident[20];
char *str = *str_p;
char *str2;
int ch;
int len;
- struct map_bfd *ptr;
-
-#define MAP(str,reloc) { str, sizeof (str) - 1, reloc }
-
- static struct map_bfd mapping[] =
- {
- MAP ("l", BFD_RELOC_LO16),
- MAP ("h", BFD_RELOC_HI16),
- MAP ("plt", BFD_RELOC_XTENSA_PLT),
- { (char *) 0, 0, BFD_RELOC_UNUSED }
- };
+ struct suffix_reloc_map *ptr;
if (*str++ != '@')
return BFD_RELOC_NONE;
len = str2 - ident;
ch = ident[0];
- for (ptr = &mapping[0]; ptr->length > 0; ptr++)
- if (ch == ptr->string[0]
+ for (ptr = &suffix_relocs[0]; ptr->length > 0; ptr++)
+ if (ch == ptr->suffix[0]
&& len == ptr->length
- && memcmp (ident, ptr->string, ptr->length) == 0)
+ && memcmp (ident, ptr->suffix, ptr->length) == 0)
{
/* Now check for "identifier@suffix+constant". */
if (*str == '-' || *str == '+')
}
+/* Find the matching operator type. */
+static unsigned char
+map_suffix_reloc_to_operator (bfd_reloc_code_real_type reloc)
+{
+ struct suffix_reloc_map *sfx;
+ unsigned char operator = (unsigned char) -1;
+
+ for (sfx = &suffix_relocs[0]; sfx->suffix; sfx++)
+ {
+ if (sfx->reloc == reloc)
+ {
+ operator = sfx->operator;
+ break;
+ }
+ }
+ assert (operator != (unsigned char) -1);
+ return operator;
+}
+
+
+/* Find the matching reloc type. */
+static bfd_reloc_code_real_type
+map_operator_to_reloc (unsigned char operator)
+{
+ struct suffix_reloc_map *sfx;
+ bfd_reloc_code_real_type reloc = BFD_RELOC_UNUSED;
+
+ for (sfx = &suffix_relocs[0]; sfx->suffix; sfx++)
+ {
+ if (sfx->operator == operator)
+ {
+ reloc = sfx->reloc;
+ break;
+ }
+ }
+
+ if (reloc == BFD_RELOC_UNUSED)
+ return BFD_RELOC_32;
+
+ return reloc;
+}
+
+
static const char *
expression_end (const char *name)
{
}
if ((tok->X_op == O_constant || tok->X_op == O_symbol)
- && (reloc = xtensa_elf_suffix (&input_line_pointer, tok))
- && (reloc != BFD_RELOC_NONE))
+ && ((reloc = xtensa_elf_suffix (&input_line_pointer, tok))
+ != BFD_RELOC_NONE))
{
switch (reloc)
{
- default:
- case BFD_RELOC_UNUSED:
- as_bad (_("unsupported relocation"));
- break;
-
- case BFD_RELOC_XTENSA_PLT:
- tok->X_op = O_pltrel;
- break;
-
- case BFD_RELOC_LO16:
- if (tok->X_op == O_constant)
+ case BFD_RELOC_LO16:
+ if (tok->X_op == O_constant)
+ {
tok->X_add_number &= 0xffff;
- else
- tok->X_op = O_lo16;
- break;
-
- case BFD_RELOC_HI16:
- if (tok->X_op == O_constant)
+ return;
+ }
+ break;
+ case BFD_RELOC_HI16:
+ if (tok->X_op == O_constant)
+ {
tok->X_add_number = ((unsigned) tok->X_add_number) >> 16;
- else
- tok->X_op = O_hi16;
- break;
+ return;
+ }
+ break;
+ case BFD_RELOC_UNUSED:
+ as_bad (_("unsupported relocation"));
+ return;
+ case BFD_RELOC_32_PCREL:
+ as_bad (_("pcrel relocation not allowed in an instruction"));
+ return;
+ default:
+ break;
}
+ tok->X_op = map_suffix_reloc_to_operator (reloc);
}
}
else
char *opname = *popname;
bfd_boolean has_underbar = FALSE;
- if (cur_vinsn.inside_bundle)
- return 0;
-
if (*opname == '_')
{
has_underbar = TRUE;
return 0;
}
- if (xtensa_nop_opcode == XTENSA_UNDEFINED
+ /* Don't do anything special with NOPs inside FLIX instructions. They
+ are handled elsewhere. Real NOP instructions are always available
+ in configurations with FLIX, so this should never be an issue but
+ check for it anyway. */
+ if (!cur_vinsn.inside_bundle && xtensa_nop_opcode == XTENSA_UNDEFINED
&& strcmp (opname, "nop") == 0)
{
if (use_transform () && !has_underbar && density_supported)
case O_uminus:
case O_subtract:
case O_pltrel:
+ case O_pcrel:
return TRUE;
default:
return FALSE;
|| xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 0)
return FALSE;
- /* If it is a weak symbol, then assume it won't reach. */
- if (S_IS_WEAK (expr->X_add_symbol))
- return FALSE;
-
- if (is_direct_call_opcode (insn->opcode)
- && ! pc_frag->tc_frag_data.use_longcalls)
+ /* If it is a weak symbol or a symbol in a different section,
+ it cannot be known to fit at assembly time. */
+ if (S_IS_WEAK (expr->X_add_symbol)
+ || S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
{
- /* If callee is undefined or in a different segment, be
- optimistic and assume it will be in range. */
- if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
+ /* For a direct call with --no-longcalls, be optimistic and
+ assume it will be in range. If the symbol is weak and
+ undefined, it may remain undefined at link-time, in which
+ case it will have a zero value and almost certainly be out
+ of range for a direct call; thus, relax for undefined weak
+ symbols even if longcalls is not enabled. */
+ if (is_direct_call_opcode (insn->opcode)
+ && ! pc_frag->tc_frag_data.use_longcalls
+ && (! S_IS_WEAK (expr->X_add_symbol)
+ || S_IS_DEFINED (expr->X_add_symbol)))
return TRUE;
- }
- /* Only references within a segment can be known to fit in the
- operands at assembly time. */
- if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
- return FALSE;
+ return FALSE;
+ }
symbolP = expr->X_add_symbol;
sym_frag = symbol_get_frag (symbolP);
BuildOp *op;
symbolS *sym;
- memset (targ, 0, sizeof (TInsn));
- targ->linenum = insn->linenum;
+ tinsn_init (targ);
+ targ->debug_line = insn->debug_line;
+ targ->loc_directive_seen = insn->loc_directive_seen;
switch (bi->typ)
{
case INSTR_INSTR:
\f
/* Relax the assembly instruction at least "min_steps".
- Return the number of steps taken. */
+ Return the number of steps taken.
+
+ For relaxation to correctly terminate, every relaxation chain must
+ terminate in one of two ways:
+
+ 1. If the chain from one instruction to the next consists entirely of
+ single instructions, then the chain *must* handle all possible
+ immediates without failing. It must not ever fail because an
+ immediate is out of range. The MOVI.N -> MOVI -> L32R relaxation
+ chain is one example. L32R loads 32 bits, and there cannot be an
+ immediate larger than 32 bits, so it satisfies this condition.
+ Single instruction relaxation chains are as defined by
+ xg_is_single_relaxable_instruction.
+
+ 2. Otherwise, the chain must end in a multi-instruction expansion: e.g.,
+ BNEZ.N -> BNEZ -> BNEZ.W15 -> BENZ.N/J
+
+ Strictly speaking, in most cases you can violate condition 1 and be OK
+ -- in particular when the last two instructions have the same single
+ size. But nevertheless, you should guarantee the above two conditions.
+
+ We could fix this so that single-instruction expansions correctly
+ terminate when they can't handle the range, but the error messages are
+ worse, and it actually turns out that in every case but one (18-bit wide
+ branches), you need a multi-instruction expansion to get the full range
+ anyway. And because 18-bit branches are handled identically to 15-bit
+ branches, there isn't any point in changing it. */
static int
xg_assembly_relax (IStack *istack,
{
int steps_taken = 0;
- /* assert (has no symbolic operands)
- Some of its immeds don't fit.
- Try to build a relaxed version.
- This may go through a couple of stages
- of single instruction transformations before
- we get there. */
+ /* Some of its immeds don't fit. Try to build a relaxed version.
+ This may go through a couple of stages of single instruction
+ transformations before we get there. */
TInsn single_target;
TInsn current_insn;
}
-static void
-xg_force_frag_space (int size)
-{
- /* This may have the side effect of creating a new fragment for the
- space to go into. I just do not like the name of the "frag"
- functions. */
- frag_grow (size);
-}
-
-
static void
xg_finish_frag (char *last_insn,
enum xtensa_relax_statesE frag_state,
fragS *old_frag;
- xg_force_frag_space (max_growth);
-
+ frag_grow (max_growth);
old_frag = frag_now;
frag_now->fr_opcode = last_insn;
case INSTR_INSTR:
new_insn->insn_type = ITYPE_INSN;
new_insn->opcode = instr_spec->opcode;
- new_insn->is_specific_opcode = FALSE;
- new_insn->linenum = old_insn->linenum;
break;
case INSTR_LITERAL_DEF:
new_insn->insn_type = ITYPE_LITERAL;
new_insn->opcode = XTENSA_UNDEFINED;
- new_insn->is_specific_opcode = FALSE;
- new_insn->linenum = old_insn->linenum;
break;
case INSTR_LABEL_DEF:
- as_bad (_("INSTR_LABEL_DEF not supported yet"));
- break;
+ abort ();
}
+ new_insn->is_specific_opcode = FALSE;
+ new_insn->debug_line = old_insn->debug_line;
+ new_insn->loc_directive_seen = old_insn->loc_directive_seen;
for (b_op = instr_spec->ops; b_op != NULL; b_op = b_op->next)
{
TInsn new_insn;
bfd_boolean do_expand;
- memset (&new_insn, 0, sizeof (TInsn));
+ tinsn_init (&new_insn);
/* Narrow it if we can. xg_simplify_insn now does all the
appropriate checking (e.g., for the density option). */
if (tinsn_has_invalid_symbolic_operands (orig_insn))
return TRUE;
+ /* Special case for extui opcode which has constraints not handled
+ by the ordinary operand encoding checks. The number of operands
+ and related syntax issues have already been checked. */
+ if (orig_insn->opcode == xtensa_extui_opcode)
+ {
+ int shiftimm = orig_insn->tok[2].X_add_number;
+ int maskimm = orig_insn->tok[3].X_add_number;
+ if (shiftimm + maskimm > 32)
+ {
+ as_bad (_("immediate operands sum to greater than 32"));
+ return TRUE;
+ }
+ }
+
/* If the instruction will definitely need to be relaxed, it is better
to expand it now for better scheduling. Decide whether to expand
now.... */
{
emit_state state;
symbolS *lit_sym = NULL;
+ bfd_reloc_code_real_type reloc;
+ bfd_boolean pcrel = FALSE;
+ char *p;
/* size = 4 for L32R. It could easily be larger when we move to
larger constants. Add a parameter later. */
frag_align (litalign, 0, 0);
record_alignment (now_seg, litalign);
- if (emit_val->X_op == O_pltrel)
+ switch (emit_val->X_op)
{
- char *p = frag_more (litsize);
+ case O_pcrel:
+ pcrel = TRUE;
+ /* fall through */
+ case O_pltrel:
+ p = frag_more (litsize);
xtensa_set_frag_assembly_state (frag_now);
+ reloc = map_operator_to_reloc (emit_val->X_op);
if (emit_val->X_add_symbol)
emit_val->X_op = O_symbol;
else
emit_val->X_op = O_constant;
fix_new_exp (frag_now, p - frag_now->fr_literal,
- litsize, emit_val, 0, BFD_RELOC_XTENSA_PLT);
+ litsize, emit_val, pcrel, reloc);
+ break;
+
+ default:
+ emit_expr (emit_val, litsize);
+ break;
}
- else
- emit_expr (emit_val, litsize);
assert (frag_now->tc_frag_data.literal_frag == NULL);
frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg);
frag_align (litalign, 0, 0);
record_alignment (now_seg, litalign);
- xg_force_frag_space (size);
+ frag_grow (size);
lit_saved_frag = frag_now;
frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg);
/* If an instruction is about to grow, return the longer size. */
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP1
- || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2)
- return 3;
+ || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2
+ || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP3)
+ {
+ /* For most frags at RELAX_IMMED_STEPX, with X > 0, the first
+ instruction in the relaxed version is of length 3. (The case
+ where we have to pull the instruction out of a FLIX bundle
+ is handled conservatively above.) However, frags with opcodes
+ that are expanding to wide branches end up having formats that
+ are not determinable by the RELAX_IMMED_STEPX enumeration, and
+ we can't tell directly what format the relaxer picked. This
+ is a wart in the design of the relaxer that should someday be
+ fixed, but would require major changes, or at least should
+ be accompanied by major changes to make use of that data.
+
+ In any event, we can tell that we are expanding from a single-slot
+ three-byte format to a wider one with the logic below. */
+
+ if (fmt_size <= 3 && fragP->tc_frag_data.text_expansion[0] != 3)
+ return 3 + fragP->tc_frag_data.text_expansion[0];
+ else
+ return 3;
+ }
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
return 2 + fragP->tc_frag_data.text_expansion[0];
fixes into this frchain's fix list. */
pool_location = frag_now;
frag_now->tc_frag_data.lit_frchain = frchain_now;
+ frag_now->tc_frag_data.literal_frag = frag_now;
frag_variant (rs_machine_dependent, 0, 0,
RELAX_LITERAL_POOL_BEGIN, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
static bfd_boolean
relaxable_section (asection *sec)
{
- return (sec->flags & SEC_DEBUGGING) == 0;
+ return ((sec->flags & SEC_DEBUGGING) == 0
+ && strcmp (sec->name, ".eh_frame") != 0);
+}
+
+
+static void
+xtensa_mark_frags_for_org (void)
+{
+ segT *seclist;
+
+ /* Walk over each fragment of all of the current segments. If we find
+ a .org frag in any of the segments, mark all frags prior to it as
+ "no transform", which will prevent linker optimizations from messing
+ up the .org distance. This should be done after
+ xtensa_find_unmarked_state_frags, because we don't want to worry here
+ about that function trashing the data we save here. */
+
+ for (seclist = &stdoutput->sections;
+ seclist && *seclist;
+ seclist = &(*seclist)->next)
+ {
+ segT sec = *seclist;
+ segment_info_type *seginfo;
+ fragS *fragP;
+ flagword flags;
+ flags = bfd_get_section_flags (stdoutput, sec);
+ if (flags & SEC_DEBUGGING)
+ continue;
+ if (!(flags & SEC_ALLOC))
+ continue;
+
+ seginfo = seg_info (sec);
+ if (seginfo && seginfo->frchainP)
+ {
+ fragS *last_fragP = seginfo->frchainP->frch_root;
+ for (fragP = seginfo->frchainP->frch_root; fragP;
+ fragP = fragP->fr_next)
+ {
+ /* cvt_frag_to_fill has changed the fr_type of org frags to
+ rs_fill, so use the value as cached in rs_subtype here. */
+ if (fragP->fr_subtype == RELAX_ORG)
+ {
+ while (last_fragP != fragP->fr_next)
+ {
+ last_fragP->tc_frag_data.is_no_transform = TRUE;
+ last_fragP = last_fragP->fr_next;
+ }
+ }
+ }
+ }
+ }
}
xtensa_opcode opcode;
char *const fixpos = fixP->fx_frag->fr_literal + fixP->fx_where;
- (void) decode_reloc (fixP->fx_r_type, &slot, &alt_reloc);
- if (alt_reloc)
+ if (decode_reloc (fixP->fx_r_type, &slot, &alt_reloc)
+ || alt_reloc)
as_fatal (_("unexpected fix"));
if (!insnbuf)
xtensa_callx12_opcode = xtensa_opcode_lookup (isa, "callx12");
xtensa_const16_opcode = xtensa_opcode_lookup (isa, "const16");
xtensa_entry_opcode = xtensa_opcode_lookup (isa, "entry");
+ xtensa_extui_opcode = xtensa_opcode_lookup (isa, "extui");
xtensa_movi_opcode = xtensa_opcode_lookup (isa, "movi");
xtensa_movi_n_opcode = xtensa_opcode_lookup (isa, "movi.n");
xtensa_isync_opcode = xtensa_opcode_lookup (isa, "isync");
xtensa_rsr_lcount_opcode = xtensa_opcode_lookup (isa, "rsr.lcount");
xtensa_waiti_opcode = xtensa_opcode_lookup (isa, "waiti");
+ xtensa_num_pipe_stages = xtensa_isa_num_pipe_stages (isa);
+
init_op_placement_info_table ();
/* Set up the assembly state. */
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
- xtensa_move_labels (frag_now, 0, TRUE);
+ xtensa_move_labels (frag_now, 0);
}
/* No target aligning in the absolute section. */
RELAX_DESIRE_ALIGN_IF_TARGET,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
- xtensa_move_labels (frag_now, 0, TRUE);
+ xtensa_move_labels (frag_now, 0);
}
/* We need to mark the following properties even if we aren't aligning. */
void
xtensa_flush_pending_output (void)
{
+ /* This line fixes a bug where automatically generated gstabs info
+ separates a function label from its entry instruction, ending up
+ with the literal position between the function label and the entry
+ instruction and crashing code. It only happens with --gstabs and
+ --text-section-literals, and when several other obscure relaxation
+ conditions are met. */
+ if (outputting_stabs_line_debug)
+ return;
+
if (cur_vinsn.inside_bundle)
as_bad (_("missing closing brace"));
md_assemble (char *str)
{
xtensa_isa isa = xtensa_default_isa;
- char *opname, *file_name;
+ char *opname;
unsigned opnamelen;
bfd_boolean has_underbar = FALSE;
char *arg_strings[MAX_INSN_ARGS];
return;
}
- /* A FLIX bundle may be spread across multiple input lines. We want to
- report the first such line in the debug information. Record the line
- number for each TInsn (assume the file name doesn't change), so the
- first line can be found later. */
- as_where (&file_name, &orig_insn.linenum);
+ /* Record the line number for each TInsn, because a FLIX bundle may be
+ spread across multiple input lines and individual instructions may be
+ moved around in some cases. */
+ orig_insn.loc_directive_seen = dwarf2_loc_directive_seen;
+ dwarf2_where (&orig_insn.debug_line);
+ dwarf2_consume_line_info ();
xg_add_branch_and_loop_targets (&orig_insn);
as_bad_where (fragP->fr_file, fragP->fr_line,
_("unaligned entry instruction"));
}
+
+ if (linkrelax && fragP->fr_type == rs_org)
+ fragP->fr_subtype = RELAX_ORG;
}
if (fixP->fx_r_type == BFD_RELOC_XTENSA_ASM_EXPAND)
return 0;
+ if (fixP->fx_r_type == BFD_RELOC_32_PCREL)
+ return addr;
+
if (!insnbuf)
{
insnbuf = xtensa_insnbuf_alloc (isa);
}
+/* tc_symbol_new_hook */
+
+symbolS *expr_symbols = NULL;
+
+void
+xtensa_symbol_new_hook (symbolS *sym)
+{
+ if (is_leb128_expr && S_GET_SEGMENT (sym) == expr_section)
+ {
+ symbol_get_tc (sym)->next_expr_symbol = expr_symbols;
+ expr_symbols = sym;
+ }
+}
+
+
void
md_apply_fix (fixS *fixP, valueT *valP, segT seg)
{
switch (fixP->fx_r_type)
{
+ case BFD_RELOC_32_PCREL:
case BFD_RELOC_32:
case BFD_RELOC_16:
case BFD_RELOC_8:
char *
md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[4];
- char *t;
- int i;
-
- switch (type)
- {
- case 'f':
- prec = 2;
- break;
-
- case 'd':
- prec = 4;
- break;
-
- default:
- *sizeP = 0;
- return "bad call to md_atof";
- }
-
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * 2;
-
- for (i = prec - 1; i >= 0; i--)
- {
- int idx = i;
- if (target_big_endian)
- idx = (prec - 1 - i);
-
- md_number_to_chars (litP, (valueT) words[idx], 2);
- litP += 2;
- }
-
- return NULL;
+ return ieee_md_atof (type, litP, sizeP, target_big_endian);
}
}
if (!fixp->fx_pcrel != !reloc->howto->pc_relative)
- as_fatal (_("internal error? cannot generate `%s' relocation"),
+ as_fatal (_("internal error; cannot generate `%s' relocation"),
bfd_get_reloc_code_name (fixp->fx_r_type));
return reloc;
{
xtensa_isa isa = xtensa_default_isa;
rt = new_resource_table
- (isa, xtensa_isa_num_pipe_stages (isa),
+ (isa, xtensa_num_pipe_stages,
xtensa_isa_num_funcUnits (isa),
(unit_num_copies_func) xtensa_funcUnit_num_copies,
(opcode_num_units_func) xtensa_opcode_num_funcUnit_uses,
bfd_boolean is_jump = FALSE;
bfd_boolean is_branch = FALSE;
xtensa_isa isa = xtensa_default_isa;
- int i;
int insn_size;
int extra_space;
char *f = NULL;
int slot;
- unsigned current_line, best_linenum;
- char *current_file;
+ struct dwarf2_line_info debug_line;
+ bfd_boolean loc_directive_seen = FALSE;
+ TInsn *tinsn;
- best_linenum = UINT_MAX;
+ memset (&debug_line, 0, sizeof (struct dwarf2_line_info));
if (generating_literals)
{
xtensa_set_frag_assembly_state (frag_now);
}
- for (i = 0; i < vinsn->num_slots; i++)
+ for (slot = 0; slot < vinsn->num_slots; slot++)
{
+ tinsn = &vinsn->slots[slot];
+
/* See if the instruction implies an aligned section. */
- if (xtensa_opcode_is_loop (isa, vinsn->slots[i].opcode) == 1)
+ if (xtensa_opcode_is_loop (isa, tinsn->opcode) == 1)
record_alignment (now_seg, 2);
- /* Also determine the best line number for debug info. */
- best_linenum = vinsn->slots[i].linenum < best_linenum
- ? vinsn->slots[i].linenum : best_linenum;
+ /* Determine the best line number for debug info. */
+ if ((tinsn->loc_directive_seen || !loc_directive_seen)
+ && (tinsn->debug_line.filenum != debug_line.filenum
+ || tinsn->debug_line.line < debug_line.line
+ || tinsn->debug_line.column < debug_line.column))
+ debug_line = tinsn->debug_line;
+ if (tinsn->loc_directive_seen)
+ loc_directive_seen = TRUE;
}
/* Special cases for instructions that force an alignment... */
frag_var (rs_machine_dependent, 0, 0,
RELAX_CHECK_ALIGN_NEXT_OPCODE, target_sym, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
-
- xtensa_move_labels (frag_now, 0, FALSE);
}
if (vinsn->slots[0].opcode == xtensa_entry_opcode
&& !vinsn->slots[0].is_specific_opcode)
{
xtensa_mark_literal_pool_location ();
- xtensa_move_labels (frag_now, 0, TRUE);
+ xtensa_move_labels (frag_now, 0);
frag_var (rs_align_test, 1, 1, 0, NULL, 2, NULL);
}
xtensa_insnbuf_to_chars (isa, vinsn->insnbuf, (unsigned char *) f, 0);
- /* Temporarily set the logical line number to the one we want to appear
- in the debug information. */
- as_where (¤t_file, ¤t_line);
- new_logical_line (current_file, best_linenum);
- dwarf2_emit_insn (insn_size + extra_space);
- new_logical_line (current_file, current_line);
+ if (debug_type == DEBUG_DWARF2 || loc_directive_seen)
+ dwarf2_gen_line_info (frag_now_fix () - (insn_size + extra_space),
+ &debug_line);
for (slot = 0; slot < vinsn->num_slots; slot++)
{
- TInsn *tinsn = &vinsn->slots[slot];
+ tinsn = &vinsn->slots[slot];
frag_now->tc_frag_data.slot_subtypes[slot] = tinsn->subtype;
frag_now->tc_frag_data.slot_symbols[slot] = tinsn->symbol;
frag_now->tc_frag_data.slot_offsets[slot] = tinsn->offset;
static void xtensa_fix_target_frags (void);
static void xtensa_mark_narrow_branches (void);
static void xtensa_mark_zcl_first_insns (void);
+static void xtensa_mark_difference_of_two_symbols (void);
static void xtensa_fix_a0_b_retw_frags (void);
static void xtensa_fix_b_j_loop_end_frags (void);
static void xtensa_fix_close_loop_end_frags (void);
}
+/* When a difference-of-symbols expression is encoded as a uleb128 or
+ sleb128 value, the linker is unable to adjust that value to account for
+ link-time relaxation. Mark all the code between such symbols so that
+ its size cannot be changed by linker relaxation. */
+
+static void
+xtensa_mark_difference_of_two_symbols (void)
+{
+ symbolS *expr_sym;
+
+ for (expr_sym = expr_symbols; expr_sym;
+ expr_sym = symbol_get_tc (expr_sym)->next_expr_symbol)
+ {
+ expressionS *expr = symbol_get_value_expression (expr_sym);
+
+ if (expr->X_op == O_subtract)
+ {
+ symbolS *left = expr->X_add_symbol;
+ symbolS *right = expr->X_op_symbol;
+
+ /* Difference of two symbols not in the same section
+ are handled with relocations in the linker. */
+ if (S_GET_SEGMENT (left) == S_GET_SEGMENT (right))
+ {
+ fragS *start;
+ fragS *end;
+
+ if (symbol_get_frag (left)->fr_address
+ <= symbol_get_frag (right)->fr_address)
+ {
+ start = symbol_get_frag (left);
+ end = symbol_get_frag (right);
+ }
+ else
+ {
+ start = symbol_get_frag (right);
+ end = symbol_get_frag (left);
+ }
+ do
+ {
+ start->tc_frag_data.is_no_transform = 1;
+ start = start->fr_next;
+ }
+ while (start && start->fr_address < end->fr_address);
+ }
+ }
+ }
+}
+
+
/* Re-process all of the fragments looking to convert all of the
RELAX_ADD_NOP_IF_A0_B_RETW. If the next instruction is a
conditional branch or a retw/retw.n, convert this frag to one that
int align_power;
offsetT opt_diff;
offsetT branch_align;
+ fragS *loop_frag;
assert (fragP->fr_type == rs_machine_dependent);
switch (fragP->fr_subtype)
return opt_diff;
case RELAX_ALIGN_NEXT_OPCODE:
- target_size = get_loop_align_size (next_frag_format_size (fragP));
+ /* The next non-empty frag after this one holds the LOOP instruction
+ that needs to be aligned. The required alignment depends on the
+ size of the next non-empty frag after the loop frag, i.e., the
+ first instruction in the loop. */
+ loop_frag = next_non_empty_frag (fragP);
+ target_size = get_loop_align_size (next_frag_format_size (loop_frag));
loop_insn_offset = 0;
is_loop = next_frag_opcode_is_loop (fragP, &loop_opcode);
assert (is_loop);
/* If the loop has been expanded then the LOOP instruction
could be at an offset from this fragment. */
- if (next_non_empty_frag(fragP)->tc_frag_data.slot_subtypes[0]
- != RELAX_IMMED)
+ if (loop_frag->tc_frag_data.slot_subtypes[0] != RELAX_IMMED)
loop_insn_offset = get_expanded_loop_offset (loop_opcode);
/* In an ideal world, which is what we are shooting for here,
will call get_noop_aligned_address. */
target_address =
address + loop_insn_offset + xg_get_single_size (loop_opcode);
- align_power = get_text_align_power (target_size),
+ align_power = get_text_align_power (target_size);
opt_diff = get_text_align_fill_size (target_address, align_power,
target_size, FALSE, FALSE);
case RELAX_IMMED:
case RELAX_IMMED_STEP1:
case RELAX_IMMED_STEP2:
+ case RELAX_IMMED_STEP3:
/* Place the immediate. */
new_stretch += relax_frag_immed
(now_seg, fragP, stretch,
int old_size;
bfd_boolean negatable_branch = FALSE;
bfd_boolean branch_jmp_to_next = FALSE;
- bfd_boolean wide_insn = FALSE;
+ bfd_boolean from_wide_insn = FALSE;
xtensa_isa isa = xtensa_default_isa;
IStack istack;
offsetT frag_offset;
int num_steps;
- fragS *lit_fragP;
int num_text_bytes, num_literal_bytes;
- int literal_diff, total_text_diff, this_text_diff, first;
+ int literal_diff, total_text_diff, this_text_diff;
assert (fragP->fr_opcode != NULL);
xg_clear_vinsn (&cur_vinsn);
vinsn_from_chars (&cur_vinsn, fragP->fr_opcode);
if (cur_vinsn.num_slots > 1)
- wide_insn = TRUE;
+ from_wide_insn = TRUE;
tinsn = cur_vinsn.slots[slot];
tinsn_immed_from_frag (&tinsn, fragP, slot);
istack_init (&istack);
num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP, frag_offset,
min_steps, stretch);
- if (num_steps < min_steps)
- {
- as_fatal (_("internal error: relaxation failed"));
- return 0;
- }
-
- if (num_steps > RELAX_IMMED_MAXSTEPS)
- {
- as_fatal (_("internal error: relaxation requires too many steps"));
- return 0;
- }
+ assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
fragP->tc_frag_data.slot_subtypes[slot] = (int) RELAX_IMMED + num_steps;
/* Figure out the number of bytes needed. */
- lit_fragP = 0;
num_literal_bytes = get_num_stack_literal_bytes (&istack);
- literal_diff =
- num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
- first = 0;
- while (istack.insn[first].opcode == XTENSA_UNDEFINED)
- first++;
+ literal_diff
+ = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
num_text_bytes = get_num_stack_text_bytes (&istack);
- if (wide_insn)
+
+ if (from_wide_insn)
{
+ int first = 0;
+ while (istack.insn[first].opcode == XTENSA_UNDEFINED)
+ first++;
+
num_text_bytes += old_size;
if (opcode_fits_format_slot (istack.insn[first].opcode, fmt, slot))
num_text_bytes -= xg_get_single_size (istack.insn[first].opcode);
+ else
+ {
+ /* The first instruction in the relaxed sequence will go after
+ the current wide instruction, and thus its symbolic immediates
+ might not fit. */
+
+ istack_init (&istack);
+ num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP,
+ frag_offset + old_size,
+ min_steps, stretch + old_size);
+ assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
+
+ fragP->tc_frag_data.slot_subtypes[slot]
+ = (int) RELAX_IMMED + num_steps;
+
+ num_literal_bytes = get_num_stack_literal_bytes (&istack);
+ literal_diff
+ = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
+
+ num_text_bytes = get_num_stack_text_bytes (&istack) + old_size;
+ }
}
+
total_text_diff = num_text_bytes - old_size;
this_text_diff = total_text_diff - fragP->tc_frag_data.text_expansion[slot];
/* Find the associated expandable literal for this. */
if (literal_diff != 0)
{
- lit_fragP = fragP->tc_frag_data.literal_frags[slot];
+ fragS *lit_fragP = fragP->tc_frag_data.literal_frags[slot];
if (lit_fragP)
{
assert (literal_diff == 4);
case RELAX_IMMED:
case RELAX_IMMED_STEP1:
case RELAX_IMMED_STEP2:
+ case RELAX_IMMED_STEP3:
/* Place the immediate. */
convert_frag_immed
(sec, fragp,
bfd_boolean branch_jmp_to_next = FALSE;
char *fr_opcode = fragP->fr_opcode;
xtensa_isa isa = xtensa_default_isa;
- bfd_boolean wide_insn = FALSE;
+ bfd_boolean from_wide_insn = FALSE;
int bytes;
bfd_boolean is_loop;
vinsn_from_chars (&cur_vinsn, fr_opcode);
if (cur_vinsn.num_slots > 1)
- wide_insn = TRUE;
+ from_wide_insn = TRUE;
orig_tinsn = cur_vinsn.slots[slot];
tinsn_immed_from_frag (&orig_tinsn, fragP, slot);
break;
case ITYPE_INSN:
- if (first && wide_insn)
+ if (first && from_wide_insn)
{
target_offset += xtensa_format_length (isa, fmt);
first = FALSE;
/* Add a fixup. */
target_seg = S_GET_SEGMENT (lit_sym);
assert (target_seg);
- if (tinsn->tok[0].X_op == O_pltrel)
- reloc_type = BFD_RELOC_XTENSA_PLT;
- else
- reloc_type = BFD_RELOC_32;
+ reloc_type = map_operator_to_reloc (tinsn->tok[0].X_op);
fix_new_exp_in_seg (target_seg, 0, lit_frag, 0, 4,
&tinsn->tok[0], FALSE, reloc_type);
break;
case ITYPE_INSN:
xg_resolve_labels (tinsn, gen_label);
xg_resolve_literals (tinsn, lit_sym);
- if (wide_insn && first)
+ if (from_wide_insn && first)
{
first = FALSE;
if (opcode_fits_format_slot (tinsn->opcode, fmt, slot))
target = 0;
}
- know (symbolP);
- know (symbolP->sy_frag);
- know (!(S_GET_SEGMENT (symbolP) == absolute_section)
- || symbol_get_frag (symbolP) == &zero_address_frag);
-
loop_length = target - (fragP->fr_address + fragP->fr_fix);
loop_length_hi = loop_length & ~0x0ff;
loop_length_lo = loop_length & 0x0ff;
frchain_to = literal_pool->tc_frag_data.lit_frchain;
assert (frchain_to);
}
- insert_after = literal_pool;
-
- while (insert_after->fr_next->fr_subtype != RELAX_LITERAL_POOL_END)
- insert_after = insert_after->fr_next;
-
+ insert_after = literal_pool->tc_frag_data.literal_frag;
dest_seg = insert_after->fr_next->tc_frag_data.lit_seg;
*frag_splice = next_frag;
search_frag->fr_next = insert_after->fr_next;
insert_after->fr_next = search_frag;
search_frag->tc_frag_data.lit_seg = dest_seg;
+ literal_pool->tc_frag_data.literal_frag = search_frag;
/* Now move any fixups associated with this frag to the
right section. */
(frag_predicate, frag_predicate, const char *, xt_section_type);
static void xtensa_create_xproperty_segments
(frag_flags_fn, const char *, xt_section_type);
-static segment_info_type *retrieve_segment_info (segT);
static bfd_boolean section_has_property (segT, frag_predicate);
static bfd_boolean section_has_xproperty (segT, frag_flags_fn);
static void add_xt_block_frags
- (segT, segT, xtensa_block_info **, frag_predicate, frag_predicate);
+ (segT, xtensa_block_info **, frag_predicate, frag_predicate);
static bfd_boolean xtensa_frag_flags_is_empty (const frag_flags *);
static void xtensa_frag_flags_init (frag_flags *);
static void get_frag_property_flags (const fragS *, frag_flags *);
static bfd_vma frag_flags_to_number (const frag_flags *);
-static void add_xt_prop_frags
- (segT, segT, xtensa_block_info **, frag_flags_fn);
+static void add_xt_prop_frags (segT, xtensa_block_info **, frag_flags_fn);
/* Set up property tables after relaxation. */
xtensa_move_seg_list_to_beginning (literal_head);
xtensa_find_unmarked_state_frags ();
+ xtensa_mark_frags_for_org ();
+ xtensa_mark_difference_of_two_symbols ();
xtensa_create_property_segments (get_frag_is_literal,
NULL,
if (section_has_property (sec, property_function))
{
- segT insn_sec =
- xtensa_get_property_section (sec, section_name_base);
- segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec);
- xtensa_block_info **xt_blocks =
- &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+ segment_info_type *xt_seg_info;
+ xtensa_block_info **xt_blocks;
+ segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+
+ prop_sec->output_section = prop_sec;
+ subseg_set (prop_sec, 0);
+ xt_seg_info = seg_info (prop_sec);
+ xt_blocks = &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+
/* Walk over all of the frchains here and add new sections. */
- add_xt_block_frags (sec, insn_sec, xt_blocks, property_function,
+ add_xt_block_frags (sec, xt_blocks, property_function,
end_property_function);
}
}
if (block)
{
xtensa_block_info *cur_block;
- /* This is a section with some data. */
int num_recs = 0;
bfd_size_type rec_size;
rec_size = num_recs * 8;
bfd_set_section_size (stdoutput, sec, rec_size);
- /* In order to make this work with the assembler, we have to
- build some frags and then build the "fixups" for it. It
- would be easier to just set the contents then set the
- arlents. */
-
if (num_recs)
{
- /* Allocate a fragment and leak it. */
- fragS *fragP;
- bfd_size_type frag_size;
- fixS *fixes;
- frchainS *frchainP;
- int i;
char *frag_data;
+ int i;
- frag_size = sizeof (fragS) + rec_size;
- fragP = (fragS *) xmalloc (frag_size);
-
- memset (fragP, 0, frag_size);
- fragP->fr_address = 0;
- fragP->fr_next = NULL;
- fragP->fr_fix = rec_size;
- fragP->fr_var = 0;
- fragP->fr_type = rs_fill;
- /* The rest are zeros. */
-
- frchainP = seginfo->frchainP;
- frchainP->frch_root = fragP;
- frchainP->frch_last = fragP;
-
- fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs);
- memset (fixes, 0, sizeof (fixS) * num_recs);
-
- seginfo->fix_root = fixes;
- seginfo->fix_tail = &fixes[num_recs - 1];
+ subseg_set (sec, 0);
+ frag_data = frag_more (rec_size);
cur_block = block;
- frag_data = &fragP->fr_literal[0];
for (i = 0; i < num_recs; i++)
{
- fixS *fix = &fixes[i];
- assert (cur_block);
+ fixS *fix;
/* Write the fixup. */
- if (i != num_recs - 1)
- fix->fx_next = &fixes[i + 1];
- else
- fix->fx_next = NULL;
- fix->fx_size = 4;
- fix->fx_done = 0;
- fix->fx_frag = fragP;
- fix->fx_where = i * 8;
- fix->fx_addsy = section_symbol (cur_block->sec);
- fix->fx_offset = cur_block->offset;
- fix->fx_r_type = BFD_RELOC_32;
- fix->fx_file = "Internal Assembly";
+ assert (cur_block);
+ fix = fix_new (frag_now, i * 8, 4,
+ section_symbol (cur_block->sec),
+ cur_block->offset,
+ FALSE, BFD_RELOC_32);
+ fix->fx_file = "<internal>";
fix->fx_line = 0;
/* Write the length. */
- md_number_to_chars (&frag_data[4 + 8 * i],
+ md_number_to_chars (&frag_data[4 + i * 8],
cur_block->size, 4);
cur_block = cur_block->next;
}
+ frag_wane (frag_now);
+ frag_new (0);
+ frag_wane (frag_now);
}
}
}
if (section_has_xproperty (sec, flag_fn))
{
- segT insn_sec =
- xtensa_get_property_section (sec, section_name_base);
- segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec);
- xtensa_block_info **xt_blocks =
- &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+ segment_info_type *xt_seg_info;
+ xtensa_block_info **xt_blocks;
+ segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+
+ prop_sec->output_section = prop_sec;
+ subseg_set (prop_sec, 0);
+ xt_seg_info = seg_info (prop_sec);
+ xt_blocks = &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+
/* Walk over all of the frchains here and add new sections. */
- add_xt_prop_frags (sec, insn_sec, xt_blocks, flag_fn);
+ add_xt_prop_frags (sec, xt_blocks, flag_fn);
}
}
if (block)
{
xtensa_block_info *cur_block;
- /* This is a section with some data. */
int num_recs = 0;
bfd_size_type rec_size;
rec_size = num_recs * (8 + 4);
bfd_set_section_size (stdoutput, sec, rec_size);
-
/* elf_section_data (sec)->this_hdr.sh_entsize = 12; */
- /* In order to make this work with the assembler, we have to build
- some frags then build the "fixups" for it. It would be easier to
- just set the contents then set the arlents. */
-
if (num_recs)
{
- /* Allocate a fragment and (unfortunately) leak it. */
- fragS *fragP;
- bfd_size_type frag_size;
- fixS *fixes;
- frchainS *frchainP;
- int i;
char *frag_data;
+ int i;
- frag_size = sizeof (fragS) + rec_size;
- fragP = (fragS *) xmalloc (frag_size);
-
- memset (fragP, 0, frag_size);
- fragP->fr_address = 0;
- fragP->fr_next = NULL;
- fragP->fr_fix = rec_size;
- fragP->fr_var = 0;
- fragP->fr_type = rs_fill;
- /* The rest are zeros. */
-
- frchainP = seginfo->frchainP;
- frchainP->frch_root = fragP;
- frchainP->frch_last = fragP;
-
- fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs);
- memset (fixes, 0, sizeof (fixS) * num_recs);
-
- seginfo->fix_root = fixes;
- seginfo->fix_tail = &fixes[num_recs - 1];
+ subseg_set (sec, 0);
+ frag_data = frag_more (rec_size);
cur_block = block;
- frag_data = &fragP->fr_literal[0];
for (i = 0; i < num_recs; i++)
{
- fixS *fix = &fixes[i];
- assert (cur_block);
+ fixS *fix;
/* Write the fixup. */
- if (i != num_recs - 1)
- fix->fx_next = &fixes[i + 1];
- else
- fix->fx_next = NULL;
- fix->fx_size = 4;
- fix->fx_done = 0;
- fix->fx_frag = fragP;
- fix->fx_where = i * (8 + 4);
- fix->fx_addsy = section_symbol (cur_block->sec);
- fix->fx_offset = cur_block->offset;
- fix->fx_r_type = BFD_RELOC_32;
- fix->fx_file = "Internal Assembly";
+ assert (cur_block);
+ fix = fix_new (frag_now, i * 12, 4,
+ section_symbol (cur_block->sec),
+ cur_block->offset,
+ FALSE, BFD_RELOC_32);
+ fix->fx_file = "<internal>";
fix->fx_line = 0;
/* Write the length. */
- md_number_to_chars (&frag_data[4 + (8+4) * i],
+ md_number_to_chars (&frag_data[4 + i * 12],
cur_block->size, 4);
- md_number_to_chars (&frag_data[8 + (8+4) * i],
+ md_number_to_chars (&frag_data[8 + i * 12],
frag_flags_to_number (&cur_block->flags),
4);
cur_block = cur_block->next;
}
+ frag_wane (frag_now);
+ frag_new (0);
+ frag_wane (frag_now);
}
}
}
}
-static segment_info_type *
-retrieve_segment_info (segT seg)
-{
- segment_info_type *seginfo;
- seginfo = (segment_info_type *) bfd_get_section_userdata (stdoutput, seg);
- if (!seginfo)
- {
- frchainS *frchainP;
-
- seginfo = (segment_info_type *) xmalloc (sizeof (*seginfo));
- memset ((void *) seginfo, 0, sizeof (*seginfo));
- seginfo->fix_root = NULL;
- seginfo->fix_tail = NULL;
- seginfo->bfd_section = seg;
- seginfo->sym = 0;
- /* We will not be dealing with these, only our special ones. */
- bfd_set_section_userdata (stdoutput, seg, (void *) seginfo);
-
- frchainP = (frchainS *) xmalloc (sizeof (frchainS));
- frchainP->frch_root = NULL;
- frchainP->frch_last = NULL;
- frchainP->frch_next = NULL;
- frchainP->frch_subseg = 0;
- frchainP->fix_root = NULL;
- frchainP->fix_tail = NULL;
- /* Do not init the objstack. */
- /* obstack_begin (&frchainP->frch_obstack, chunksize); */
- /* frchainP->frch_frag_now = fragP; */
- frchainP->frch_frag_now = NULL;
-
- seginfo->frchainP = frchainP;
- }
-
- return seginfo;
-}
-
-
static bfd_boolean
section_has_property (segT sec, frag_predicate property_function)
{
static void
add_xt_block_frags (segT sec,
- segT xt_block_sec,
xtensa_block_info **xt_block,
frag_predicate property_function,
frag_predicate end_property_function)
{
- segment_info_type *seg_info;
- segment_info_type *xt_seg_info;
bfd_vma seg_offset;
fragS *fragP;
- xt_seg_info = retrieve_segment_info (xt_block_sec);
- seg_info = retrieve_segment_info (sec);
-
/* Build it if needed. */
while (*xt_block != NULL)
xt_block = &(*xt_block)->next;
/* Walk through the frags. */
seg_offset = 0;
- if (seg_info->frchainP)
+ if (seg_info (sec)->frchainP)
{
- for (fragP = seg_info->frchainP->frch_root;
+ for (fragP = seg_info (sec)->frchainP->frch_root;
fragP;
fragP = fragP->fr_next)
{
xtensa_frag_flags_init (prop_flags);
if (fragP->tc_frag_data.is_literal)
prop_flags->is_literal = TRUE;
+ if (fragP->tc_frag_data.is_specific_opcode
+ || fragP->tc_frag_data.is_no_transform)
+ {
+ prop_flags->is_no_transform = TRUE;
+ if (xtensa_frag_flags_is_empty (prop_flags))
+ prop_flags->is_data = TRUE;
+ }
if (fragP->tc_frag_data.is_unreachable)
prop_flags->is_unreachable = TRUE;
else if (fragP->tc_frag_data.is_insn)
prop_flags->insn.is_loop_target = TRUE;
if (fragP->tc_frag_data.is_branch_target)
prop_flags->insn.is_branch_target = TRUE;
- if (fragP->tc_frag_data.is_specific_opcode
- || fragP->tc_frag_data.is_no_transform)
- prop_flags->insn.is_no_transform = TRUE;
if (fragP->tc_frag_data.is_no_density)
prop_flags->insn.is_no_density = TRUE;
if (fragP->tc_frag_data.use_absolute_literals)
if (prop_flags->insn.is_no_density)
num |= XTENSA_PROP_INSN_NO_DENSITY;
- if (prop_flags->insn.is_no_transform)
- num |= XTENSA_PROP_INSN_NO_TRANSFORM;
+ if (prop_flags->is_no_transform)
+ num |= XTENSA_PROP_NO_TRANSFORM;
if (prop_flags->insn.is_no_reorder)
num |= XTENSA_PROP_INSN_NO_REORDER;
if (prop_flags->insn.is_abslit)
if (prop_flags_1->insn.is_no_density !=
prop_flags_2->insn.is_no_density)
return FALSE;
- if (prop_flags_1->insn.is_no_transform !=
- prop_flags_2->insn.is_no_transform)
+ if (prop_flags_1->is_no_transform !=
+ prop_flags_2->is_no_transform)
return FALSE;
if (prop_flags_1->insn.is_no_reorder !=
prop_flags_2->insn.is_no_reorder)
static void
add_xt_prop_frags (segT sec,
- segT xt_block_sec,
xtensa_block_info **xt_block,
frag_flags_fn property_function)
{
- segment_info_type *seg_info;
- segment_info_type *xt_seg_info;
bfd_vma seg_offset;
fragS *fragP;
- xt_seg_info = retrieve_segment_info (xt_block_sec);
- seg_info = retrieve_segment_info (sec);
/* Build it if needed. */
while (*xt_block != NULL)
{
/* Walk through the frags. */
seg_offset = 0;
- if (seg_info->frchainP)
+ if (seg_info (sec)->frchainP)
{
- for (fragP = seg_info->frchainP->frch_root; fragP;
+ for (fragP = seg_info (sec)->frchainP->frch_root; fragP;
fragP = fragP->fr_next)
{
xtensa_block_info tmp_block;
TInsn *insn;
assert (!istack_full (stack));
insn = &stack->insn[rec];
- memset (insn, 0, sizeof (TInsn));
+ tinsn_init (insn);
stack->ninsn++;
return insn;
}
int rec = stack->ninsn - 1;
assert (!istack_empty (stack));
stack->ninsn--;
- memset (&stack->insn[rec], 0, sizeof (TInsn));
+ tinsn_init (&stack->insn[rec]);
}
\f
projects / deliverable / binutils-gdb.git / blobdiff