/* tc-xtensa.c -- Assemble Xtensa instructions.
- Copyright 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+ Copyright 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
MA 02110-1301, USA. */
-#include <string.h>
#include <limits.h>
#include "as.h"
#include "sb.h"
#include "safe-ctype.h"
#include "tc-xtensa.h"
-#include "frags.h"
#include "subsegs.h"
#include "xtensa-relax.h"
-#include "xtensa-istack.h"
#include "dwarf2dbg.h"
+#include "xtensa-istack.h"
#include "struc-symbol.h"
#include "xtensa-config.h"
+/* Provide default values for new configuration settings. */
+#ifndef XSHAL_ABI
+#define XSHAL_ABI 0
+#endif
+
#ifndef uint32
#define uint32 unsigned int
#endif
static vliw_insn cur_vinsn;
+unsigned xtensa_num_pipe_stages;
unsigned xtensa_fetch_width = XCHAL_INST_FETCH_WIDTH;
static enum debug_info_type xt_saved_debug_type = DEBUG_NONE;
#define LITERAL_SECTION_NAME xtensa_section_rename (".literal")
#define LIT4_SECTION_NAME xtensa_section_rename (".lit4")
-#define FINI_SECTION_NAME xtensa_section_rename (".fini")
#define INIT_SECTION_NAME xtensa_section_rename (".init")
-#define FINI_LITERAL_SECTION_NAME xtensa_section_rename (".fini.literal")
-#define INIT_LITERAL_SECTION_NAME xtensa_section_rename (".init.literal")
+#define FINI_SECTION_NAME xtensa_section_rename (".fini")
/* This type is used for the directive_stack to keep track of the
- state of the literal collection pools. */
+ state of the literal collection pools. If lit_prefix is set, it is
+ used to determine the literal section names; otherwise, the literal
+ sections are determined based on the current text section. The
+ lit_seg and lit4_seg fields cache these literal sections, with the
+ current_text_seg field used a tag to indicate whether the cached
+ values are valid. */
typedef struct lit_state_struct
{
- const char *lit_seg_name;
- const char *lit4_seg_name;
- const char *init_lit_seg_name;
- const char *fini_lit_seg_name;
+ char *lit_prefix;
+ segT current_text_seg;
segT lit_seg;
segT lit4_seg;
- segT init_lit_seg;
- segT fini_lit_seg;
} lit_state;
static lit_state default_lit_sections;
-/* We keep lists of literal segments. The seg_list type is the node
- for such a list. The *_literal_head locals are the heads of the
- various lists. All of these lists have a dummy node at the start. */
+/* We keep a list of literal segments. The seg_list type is the node
+ for this list. The literal_head pointer is the head of the list,
+ with the literal_head_h dummy node at the start. */
typedef struct seg_list_struct
{
static seg_list literal_head_h;
static seg_list *literal_head = &literal_head_h;
-static seg_list init_literal_head_h;
-static seg_list *init_literal_head = &init_literal_head_h;
-static seg_list fini_literal_head_h;
-static seg_list *fini_literal_head = &fini_literal_head_h;
/* Lists of symbols. We keep a list of symbols that label the current
/* Instruction only properties about code. */
#define XTENSA_PROP_INSN_NO_DENSITY 0x00000040
#define XTENSA_PROP_INSN_NO_REORDER 0x00000080
-#define XTENSA_PROP_INSN_NO_TRANSFORM 0x00000100
+/* Historically, NO_TRANSFORM was a property of instructions,
+ but it should apply to literals under certain circumstances. */
+#define XTENSA_PROP_NO_TRANSFORM 0x00000100
/* Branch target alignment information. This transmits information
to the linker optimization about the priority of aligning a
unsigned is_data : 1;
unsigned is_unreachable : 1;
+ /* is_specific_opcode implies no_transform. */
+ unsigned is_no_transform : 1;
+
struct
{
unsigned is_loop_target : 1;
unsigned is_no_density : 1;
/* no_longcalls flag does not need to be placed in the object file. */
- /* is_specific_opcode implies no_transform. */
- unsigned is_no_transform : 1;
unsigned is_no_reorder : 1;
#define O_pltrel O_md1 /* like O_symbol but use a PLT reloc */
#define O_hi16 O_md2 /* use high 16 bits of symbolic value */
#define O_lo16 O_md3 /* use low 16 bits of symbolic value */
+#define O_pcrel O_md4 /* value is a PC-relative offset */
+
+struct suffix_reloc_map
+{
+ char *suffix;
+ int length;
+ bfd_reloc_code_real_type reloc;
+ unsigned char operator;
+};
+
+#define SUFFIX_MAP(str, reloc, op) { str, sizeof (str) - 1, reloc, op }
+
+static struct suffix_reloc_map suffix_relocs[] =
+{
+ SUFFIX_MAP ("l", BFD_RELOC_LO16, O_lo16),
+ SUFFIX_MAP ("h", BFD_RELOC_HI16, O_hi16),
+ SUFFIX_MAP ("plt", BFD_RELOC_XTENSA_PLT, O_pltrel),
+ SUFFIX_MAP ("pcrel", BFD_RELOC_32_PCREL, O_pcrel),
+ { (char *) 0, 0, BFD_RELOC_UNUSED, 0 }
+};
/* Directives. */
FALSE, /* freeregs */
FALSE, /* longcalls */
FALSE, /* literal_prefix */
- TRUE, /* schedule */
+ FALSE, /* schedule */
#if XSHAL_USE_ABSOLUTE_LITERALS
TRUE /* absolute_literals */
#else
static void xtensa_begin_directive (int);
static void xtensa_end_directive (int);
-static void xtensa_literal_prefix (char const *, int);
+static void xtensa_literal_prefix (void);
static void xtensa_literal_position (int);
static void xtensa_literal_pseudo (int);
static void xtensa_frequency_pseudo (int);
static void xtensa_elf_cons (int);
+static void xtensa_leb128 (int);
/* Parsing and Idiom Translation. */
static void xtensa_switch_to_non_abs_literal_fragment (emit_state *);
static void xtensa_switch_section_emit_state (emit_state *, segT, subsegT);
static void xtensa_restore_emit_state (emit_state *);
-static void cache_literal_section
- (seg_list *, const char *, segT *, bfd_boolean);
+static segT cache_literal_section (bfd_boolean);
/* Import from elf32-xtensa.c in BFD library. */
-extern char *xtensa_get_property_section_name (asection *, const char *);
+extern asection *xtensa_get_property_section (asection *, const char *);
/* op_placement_info functions. */
static xtensa_opcode xtensa_callx12_opcode;
static xtensa_opcode xtensa_const16_opcode;
static xtensa_opcode xtensa_entry_opcode;
+static xtensa_opcode xtensa_extui_opcode;
static xtensa_opcode xtensa_movi_opcode;
static xtensa_opcode xtensa_movi_n_opcode;
static xtensa_opcode xtensa_isync_opcode;
}
-/* The "loops_ok" argument is provided to allow ignoring labels that
- define loop ends. This fixes a bug where the NOPs to align a
- loop opcode were included in a previous zero-cost loop:
-
- loop a0, loopend
- <loop1 body>
- loopend:
-
- loop a2, loopend2
- <loop2 body>
-
- would become:
-
- loop a0, loopend
- <loop1 body>
- nop.n <===== bad!
- loopend:
-
- loop a2, loopend2
- <loop2 body>
-
- This argument is used to prevent moving the NOP to before the
- loop-end label, which is what you want in this special case. */
-
static void
-xtensa_move_labels (fragS *new_frag, valueT new_offset, bfd_boolean loops_ok)
+xtensa_move_labels (fragS *new_frag, valueT new_offset)
{
sym_list *lit;
for (lit = insn_labels; lit; lit = lit->next)
{
symbolS *lit_sym = lit->sym;
- if (loops_ok || ! symbol_get_tc (lit_sym)->is_loop_target)
- {
- S_SET_VALUE (lit_sym, new_offset);
- symbol_set_frag (lit_sym, new_frag);
- }
+ S_SET_VALUE (lit_sym, new_offset);
+ symbol_set_frag (lit_sym, new_frag);
}
}
{ "frame", s_ignore, 0 }, /* Formerly used for STABS debugging. */
{ "long", xtensa_elf_cons, 4 },
{ "word", xtensa_elf_cons, 4 },
+ { "4byte", xtensa_elf_cons, 4 },
{ "short", xtensa_elf_cons, 2 },
+ { "2byte", xtensa_elf_cons, 2 },
+ { "sleb128", xtensa_leb128, 1},
+ { "uleb128", xtensa_leb128, 0},
{ "begin", xtensa_begin_directive, 0 },
{ "end", xtensa_end_directive, 0 },
{ "literal", xtensa_literal_pseudo, 0 },
directiveE directive;
bfd_boolean negated;
emit_state *state;
- int len;
lit_state *ls;
get_directive (&directive, &negated);
assert (ls);
*ls = default_lit_sections;
-
directive_push (directive_literal_prefix, negated, ls);
- /* Parse the new prefix from the input_line_pointer. */
- SKIP_WHITESPACE ();
- len = strspn (input_line_pointer,
- "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
- "abcdefghijklmnopqrstuvwxyz_/0123456789.$");
-
/* Process the new prefix. */
- xtensa_literal_prefix (input_line_pointer, len);
-
- /* Skip the name in the input line. */
- input_line_pointer += len;
+ xtensa_literal_prefix ();
break;
case directive_freeregs:
/* Restore the default collection sections from saved state. */
s = (lit_state *) state;
assert (s);
-
default_lit_sections = *s;
- /* free the state storage */
+ /* Free the state storage. */
+ free (s->lit_prefix);
free (s);
break;
static void
-xtensa_literal_prefix (char const *start, int len)
+xtensa_literal_prefix (void)
{
- char *name, *linkonce_suffix;
- char *newname, *newname4;
- size_t linkonce_len;
+ char *name;
+ int len;
+
+ /* Parse the new prefix from the input_line_pointer. */
+ SKIP_WHITESPACE ();
+ len = strspn (input_line_pointer,
+ "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+ "abcdefghijklmnopqrstuvwxyz_/0123456789.$");
/* Get a null-terminated copy of the name. */
name = xmalloc (len + 1);
assert (name);
-
- strncpy (name, start, len);
+ strncpy (name, input_line_pointer, len);
name[len] = 0;
- /* Allocate the sections (interesting note: the memory pointing to
- the name is actually used for the name by the new section). */
-
- newname = xmalloc (len + strlen (".literal") + 1);
- newname4 = xmalloc (len + strlen (".lit4") + 1);
-
- linkonce_len = sizeof (".gnu.linkonce.") - 1;
- if (strncmp (name, ".gnu.linkonce.", linkonce_len) == 0
- && (linkonce_suffix = strchr (name + linkonce_len, '.')) != 0)
- {
- strcpy (newname, ".gnu.linkonce.literal");
- strcpy (newname4, ".gnu.linkonce.lit4");
-
- strcat (newname, linkonce_suffix);
- strcat (newname4, linkonce_suffix);
- }
- else
- {
- int suffix_pos = len;
-
- /* If the section name ends with ".text", then replace that suffix
- instead of appending an additional suffix. */
- if (len >= 5 && strcmp (name + len - 5, ".text") == 0)
- suffix_pos -= 5;
-
- strcpy (newname, name);
- strcpy (newname4, name);
+ /* Skip the name in the input line. */
+ input_line_pointer += len;
- strcpy (newname + suffix_pos, ".literal");
- strcpy (newname4 + suffix_pos, ".lit4");
- }
+ default_lit_sections.lit_prefix = name;
- /* Note that cache_literal_section does not create a segment if
- it already exists. */
+ /* Clear cached literal sections, since the prefix has changed. */
default_lit_sections.lit_seg = NULL;
default_lit_sections.lit4_seg = NULL;
-
- /* Canonicalizing section names allows renaming literal
- sections to occur correctly. */
- default_lit_sections.lit_seg_name = tc_canonicalize_symbol_name (newname);
- default_lit_sections.lit4_seg_name = tc_canonicalize_symbol_name (newname4);
-
- free (name);
}
char *p = frag_more ((int) nbytes);
xtensa_set_frag_assembly_state (frag_now);
fix_new_exp (frag_now, p - frag_now->fr_literal,
- nbytes, &exp, 0, reloc);
+ nbytes, &exp, reloc_howto->pc_relative, reloc);
}
}
else
- emit_expr (&exp, (unsigned int) nbytes);
+ {
+ xtensa_set_frag_assembly_state (frag_now);
+ emit_expr (&exp, (unsigned int) nbytes);
+ }
}
while (*input_line_pointer++ == ',');
demand_empty_rest_of_line ();
}
+static bfd_boolean is_leb128_expr;
+
+static void
+xtensa_leb128 (int sign)
+{
+ is_leb128_expr = TRUE;
+ s_leb128 (sign);
+ is_leb128_expr = FALSE;
+}
+
\f
/* Parsing and Idiom Translation. */
static bfd_reloc_code_real_type
xtensa_elf_suffix (char **str_p, expressionS *exp_p)
{
- struct map_bfd
- {
- char *string;
- int length;
- bfd_reloc_code_real_type reloc;
- };
-
char ident[20];
char *str = *str_p;
char *str2;
int ch;
int len;
- struct map_bfd *ptr;
-
-#define MAP(str,reloc) { str, sizeof (str) - 1, reloc }
-
- static struct map_bfd mapping[] =
- {
- MAP ("l", BFD_RELOC_LO16),
- MAP ("h", BFD_RELOC_HI16),
- MAP ("plt", BFD_RELOC_XTENSA_PLT),
- { (char *) 0, 0, BFD_RELOC_UNUSED }
- };
+ struct suffix_reloc_map *ptr;
if (*str++ != '@')
return BFD_RELOC_NONE;
len = str2 - ident;
ch = ident[0];
- for (ptr = &mapping[0]; ptr->length > 0; ptr++)
- if (ch == ptr->string[0]
+ for (ptr = &suffix_relocs[0]; ptr->length > 0; ptr++)
+ if (ch == ptr->suffix[0]
&& len == ptr->length
- && memcmp (ident, ptr->string, ptr->length) == 0)
+ && memcmp (ident, ptr->suffix, ptr->length) == 0)
{
/* Now check for "identifier@suffix+constant". */
if (*str == '-' || *str == '+')
}
+/* Find the matching operator type. */
+static unsigned char
+map_suffix_reloc_to_operator (bfd_reloc_code_real_type reloc)
+{
+ struct suffix_reloc_map *sfx;
+ unsigned char operator = (unsigned char) -1;
+
+ for (sfx = &suffix_relocs[0]; sfx->suffix; sfx++)
+ {
+ if (sfx->reloc == reloc)
+ {
+ operator = sfx->operator;
+ break;
+ }
+ }
+ assert (operator != (unsigned char) -1);
+ return operator;
+}
+
+
+/* Find the matching reloc type. */
+static bfd_reloc_code_real_type
+map_operator_to_reloc (unsigned char operator)
+{
+ struct suffix_reloc_map *sfx;
+ bfd_reloc_code_real_type reloc = BFD_RELOC_UNUSED;
+
+ for (sfx = &suffix_relocs[0]; sfx->suffix; sfx++)
+ {
+ if (sfx->operator == operator)
+ {
+ reloc = sfx->reloc;
+ break;
+ }
+ }
+
+ if (reloc == BFD_RELOC_UNUSED)
+ return BFD_RELOC_32;
+
+ return reloc;
+}
+
+
static const char *
expression_end (const char *name)
{
}
if ((tok->X_op == O_constant || tok->X_op == O_symbol)
- && (reloc = xtensa_elf_suffix (&input_line_pointer, tok))
- && (reloc != BFD_RELOC_NONE))
+ && ((reloc = xtensa_elf_suffix (&input_line_pointer, tok))
+ != BFD_RELOC_NONE))
{
switch (reloc)
{
- default:
- case BFD_RELOC_UNUSED:
- as_bad (_("unsupported relocation"));
- break;
-
- case BFD_RELOC_XTENSA_PLT:
- tok->X_op = O_pltrel;
- break;
-
- case BFD_RELOC_LO16:
- if (tok->X_op == O_constant)
+ case BFD_RELOC_LO16:
+ if (tok->X_op == O_constant)
+ {
tok->X_add_number &= 0xffff;
- else
- tok->X_op = O_lo16;
- break;
-
- case BFD_RELOC_HI16:
- if (tok->X_op == O_constant)
+ return;
+ }
+ break;
+ case BFD_RELOC_HI16:
+ if (tok->X_op == O_constant)
+ {
tok->X_add_number = ((unsigned) tok->X_add_number) >> 16;
- else
- tok->X_op = O_hi16;
- break;
+ return;
+ }
+ break;
+ case BFD_RELOC_UNUSED:
+ as_bad (_("unsupported relocation"));
+ return;
+ case BFD_RELOC_32_PCREL:
+ as_bad (_("pcrel relocation not allowed in an instruction"));
+ return;
+ default:
+ break;
}
+ tok->X_op = map_suffix_reloc_to_operator (reloc);
}
}
else
char *opname = *popname;
bfd_boolean has_underbar = FALSE;
- if (cur_vinsn.inside_bundle)
- return 0;
-
if (*opname == '_')
{
has_underbar = TRUE;
return 0;
}
- if (xtensa_nop_opcode == XTENSA_UNDEFINED
+ /* Don't do anything special with NOPs inside FLIX instructions. They
+ are handled elsewhere. Real NOP instructions are always available
+ in configurations with FLIX, so this should never be an issue but
+ check for it anyway. */
+ if (!cur_vinsn.inside_bundle && xtensa_nop_opcode == XTENSA_UNDEFINED
&& strcmp (opname, "nop") == 0)
{
if (use_transform () && !has_underbar && density_supported)
xtensa_isa isa = xtensa_default_isa;
int n, num_operands;
- if (xtensa_opcode_is_call (isa, opcode) == 0)
+ if (xtensa_opcode_is_call (isa, opcode) != 1)
return FALSE;
num_operands = xtensa_opcode_num_operands (isa, opcode);
case O_uminus:
case O_subtract:
case O_pltrel:
+ case O_pcrel:
return TRUE;
default:
return FALSE;
|| xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 0)
return FALSE;
- /* If it is a weak symbol, then assume it won't reach. */
- if (S_IS_WEAK (expr->X_add_symbol))
- return FALSE;
-
- if (is_direct_call_opcode (insn->opcode)
- && ! pc_frag->tc_frag_data.use_longcalls)
+ /* If it is a weak symbol or a symbol in a different section,
+ it cannot be known to fit at assembly time. */
+ if (S_IS_WEAK (expr->X_add_symbol)
+ || S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
{
- /* If callee is undefined or in a different segment, be
- optimistic and assume it will be in range. */
- if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
+ /* For a direct call with --no-longcalls, be optimistic and
+ assume it will be in range. If the symbol is weak and
+ undefined, it may remain undefined at link-time, in which
+ case it will have a zero value and almost certainly be out
+ of range for a direct call; thus, relax for undefined weak
+ symbols even if longcalls is not enabled. */
+ if (is_direct_call_opcode (insn->opcode)
+ && ! pc_frag->tc_frag_data.use_longcalls
+ && (! S_IS_WEAK (expr->X_add_symbol)
+ || S_IS_DEFINED (expr->X_add_symbol)))
return TRUE;
- }
- /* Only references within a segment can be known to fit in the
- operands at assembly time. */
- if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
- return FALSE;
+ return FALSE;
+ }
symbolP = expr->X_add_symbol;
sym_frag = symbol_get_frag (symbolP);
BuildOp *op;
symbolS *sym;
- memset (targ, 0, sizeof (TInsn));
- targ->linenum = insn->linenum;
+ tinsn_init (targ);
+ targ->debug_line = insn->debug_line;
+ targ->loc_directive_seen = insn->loc_directive_seen;
switch (bi->typ)
{
case INSTR_INSTR:
\f
/* Relax the assembly instruction at least "min_steps".
- Return the number of steps taken. */
+ Return the number of steps taken.
+
+ For relaxation to correctly terminate, every relaxation chain must
+ terminate in one of two ways:
+
+ 1. If the chain from one instruction to the next consists entirely of
+ single instructions, then the chain *must* handle all possible
+ immediates without failing. It must not ever fail because an
+ immediate is out of range. The MOVI.N -> MOVI -> L32R relaxation
+ chain is one example. L32R loads 32 bits, and there cannot be an
+ immediate larger than 32 bits, so it satisfies this condition.
+ Single instruction relaxation chains are as defined by
+ xg_is_single_relaxable_instruction.
+
+ 2. Otherwise, the chain must end in a multi-instruction expansion: e.g.,
+ BNEZ.N -> BNEZ -> BNEZ.W15 -> BENZ.N/J
+
+ Strictly speaking, in most cases you can violate condition 1 and be OK
+ -- in particular when the last two instructions have the same single
+ size. But nevertheless, you should guarantee the above two conditions.
+
+ We could fix this so that single-instruction expansions correctly
+ terminate when they can't handle the range, but the error messages are
+ worse, and it actually turns out that in every case but one (18-bit wide
+ branches), you need a multi-instruction expansion to get the full range
+ anyway. And because 18-bit branches are handled identically to 15-bit
+ branches, there isn't any point in changing it. */
static int
xg_assembly_relax (IStack *istack,
{
int steps_taken = 0;
- /* assert (has no symbolic operands)
- Some of its immeds don't fit.
- Try to build a relaxed version.
- This may go through a couple of stages
- of single instruction transformations before
- we get there. */
+ /* Some of its immeds don't fit. Try to build a relaxed version.
+ This may go through a couple of stages of single instruction
+ transformations before we get there. */
TInsn single_target;
TInsn current_insn;
}
-static void
-xg_force_frag_space (int size)
-{
- /* This may have the side effect of creating a new fragment for the
- space to go into. I just do not like the name of the "frag"
- functions. */
- frag_grow (size);
-}
-
-
static void
xg_finish_frag (char *last_insn,
enum xtensa_relax_statesE frag_state,
fragS *old_frag;
- xg_force_frag_space (max_growth);
-
+ frag_grow (max_growth);
old_frag = frag_now;
frag_now->fr_opcode = last_insn;
symbolS *sym;
fragS *target_frag;
- if (xtensa_opcode_is_branch (isa, insn->opcode) == 0
- && xtensa_opcode_is_jump (isa, insn->opcode) == 0)
+ if (xtensa_opcode_is_branch (isa, insn->opcode) != 1
+ && xtensa_opcode_is_jump (isa, insn->opcode) != 1)
return FALSE;
for (i = 0; i < num_ops; i++)
case INSTR_INSTR:
new_insn->insn_type = ITYPE_INSN;
new_insn->opcode = instr_spec->opcode;
- new_insn->is_specific_opcode = FALSE;
- new_insn->linenum = old_insn->linenum;
break;
case INSTR_LITERAL_DEF:
new_insn->insn_type = ITYPE_LITERAL;
new_insn->opcode = XTENSA_UNDEFINED;
- new_insn->is_specific_opcode = FALSE;
- new_insn->linenum = old_insn->linenum;
break;
case INSTR_LABEL_DEF:
- as_bad (_("INSTR_LABEL_DEF not supported yet"));
- break;
+ abort ();
}
+ new_insn->is_specific_opcode = FALSE;
+ new_insn->debug_line = old_insn->debug_line;
+ new_insn->loc_directive_seen = old_insn->loc_directive_seen;
for (b_op = instr_spec->ops; b_op != NULL; b_op = b_op->next)
{
TInsn new_insn;
bfd_boolean do_expand;
- memset (&new_insn, 0, sizeof (TInsn));
+ tinsn_init (&new_insn);
/* Narrow it if we can. xg_simplify_insn now does all the
appropriate checking (e.g., for the density option). */
if (tinsn_has_invalid_symbolic_operands (orig_insn))
return TRUE;
+ /* Special case for extui opcode which has constraints not handled
+ by the ordinary operand encoding checks. The number of operands
+ and related syntax issues have already been checked. */
+ if (orig_insn->opcode == xtensa_extui_opcode)
+ {
+ int shiftimm = orig_insn->tok[2].X_add_number;
+ int maskimm = orig_insn->tok[3].X_add_number;
+ if (shiftimm + maskimm > 32)
+ {
+ as_bad (_("immediate operands sum to greater than 32"));
+ return TRUE;
+ }
+ }
+
/* If the instruction will definitely need to be relaxed, it is better
to expand it now for better scheduling. Decide whether to expand
now.... */
/* Return TRUE if the section flags are marked linkonce
- or the name is .gnu.linkonce*. */
+ or the name is .gnu.linkonce.*. */
+
+static int linkonce_len = sizeof (".gnu.linkonce.") - 1;
static bfd_boolean
get_is_linkonce_section (bfd *abfd ATTRIBUTE_UNUSED, segT sec)
link_once_flags = (flags & SEC_LINK_ONCE);
/* Flags might not be set yet. */
- if (!link_once_flags)
- {
- static size_t len = sizeof ".gnu.linkonce.t.";
+ if (!link_once_flags
+ && strncmp (segment_name (sec), ".gnu.linkonce.", linkonce_len) == 0)
+ link_once_flags = SEC_LINK_ONCE;
- if (strncmp (segment_name (sec), ".gnu.linkonce.t.", len - 1) == 0)
- link_once_flags = SEC_LINK_ONCE;
- }
return (link_once_flags != 0);
}
xtensa_add_literal_sym (symbolP);
- frag->tc_frag_data.is_literal = TRUE;
lit_num++;
return symbolP;
}
{
emit_state state;
symbolS *lit_sym = NULL;
+ bfd_reloc_code_real_type reloc;
+ bfd_boolean pcrel = FALSE;
+ char *p;
/* size = 4 for L32R. It could easily be larger when we move to
larger constants. Add a parameter later. */
frag_align (litalign, 0, 0);
record_alignment (now_seg, litalign);
- if (emit_val->X_op == O_pltrel)
+ switch (emit_val->X_op)
{
- char *p = frag_more (litsize);
+ case O_pcrel:
+ pcrel = TRUE;
+ /* fall through */
+ case O_pltrel:
+ p = frag_more (litsize);
xtensa_set_frag_assembly_state (frag_now);
+ reloc = map_operator_to_reloc (emit_val->X_op);
if (emit_val->X_add_symbol)
emit_val->X_op = O_symbol;
else
emit_val->X_op = O_constant;
fix_new_exp (frag_now, p - frag_now->fr_literal,
- litsize, emit_val, 0, BFD_RELOC_XTENSA_PLT);
+ litsize, emit_val, pcrel, reloc);
+ break;
+
+ default:
+ emit_expr (emit_val, litsize);
+ break;
}
- else
- emit_expr (emit_val, litsize);
assert (frag_now->tc_frag_data.literal_frag == NULL);
frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg);
frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now);
lit_sym = frag_now->fr_symbol;
- frag_now->tc_frag_data.is_literal = TRUE;
/* Go back. */
xtensa_restore_emit_state (&state);
frag_align (litalign, 0, 0);
record_alignment (now_seg, litalign);
- xg_force_frag_space (size);
+ frag_grow (size);
lit_saved_frag = frag_now;
frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg);
- frag_now->tc_frag_data.is_literal = TRUE;
frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now);
xg_finish_frag (0, RELAX_LITERAL, 0, size, FALSE);
the_fix = fix_new_exp (fragP, offset, fmt_length, expr,
howto->pc_relative, reloc);
the_fix->fx_no_overflow = 1;
-
- if (expr->X_add_symbol
- && (S_IS_EXTERNAL (expr->X_add_symbol)
- || S_IS_WEAK (expr->X_add_symbol)))
- the_fix->fx_plt = TRUE;
-
the_fix->tc_fix_data.X_add_symbol = expr->X_add_symbol;
the_fix->tc_fix_data.X_add_number = expr->X_add_number;
the_fix->tc_fix_data.slot = slot;
{
symbolS *sym = get_special_label_symbol ();
int i;
- /* assert (!insn->is_literal); */
for (i = 0; i < insn->ntok; i++)
if (insn->tok[i].X_add_symbol == sym)
insn->tok[i].X_add_symbol = label_sym;
/* If an instruction is about to grow, return the longer size. */
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP1
- || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2)
- return 3;
+ || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2
+ || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP3)
+ {
+ /* For most frags at RELAX_IMMED_STEPX, with X > 0, the first
+ instruction in the relaxed version is of length 3. (The case
+ where we have to pull the instruction out of a FLIX bundle
+ is handled conservatively above.) However, frags with opcodes
+ that are expanding to wide branches end up having formats that
+ are not determinable by the RELAX_IMMED_STEPX enumeration, and
+ we can't tell directly what format the relaxer picked. This
+ is a wart in the design of the relaxer that should someday be
+ fixed, but would require major changes, or at least should
+ be accompanied by major changes to make use of that data.
+
+ In any event, we can tell that we are expanding from a single-slot
+ three-byte format to a wider one with the logic below. */
+
+ if (fmt_size <= 3 && fragP->tc_frag_data.text_expansion[0] != 3)
+ return 3 + fragP->tc_frag_data.text_expansion[0];
+ else
+ return 3;
+ }
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
return 2 + fragP->tc_frag_data.text_expansion[0];
emit_state s;
fragS *pool_location;
- if (use_literal_section && !directive_state[directive_absolute_literals])
+ if (use_literal_section)
return;
- frag_align (2, 0, 0);
- record_alignment (now_seg, 2);
-
/* We stash info in these frags so we can later move the literal's
fixes into this frchain's fix list. */
pool_location = frag_now;
frag_now->tc_frag_data.lit_frchain = frchain_now;
+ frag_now->tc_frag_data.literal_frag = frag_now;
frag_variant (rs_machine_dependent, 0, 0,
RELAX_LITERAL_POOL_BEGIN, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
static bfd_boolean
relaxable_section (asection *sec)
{
- return (sec->flags & SEC_DEBUGGING) == 0;
+ return ((sec->flags & SEC_DEBUGGING) == 0
+ && strcmp (sec->name, ".eh_frame") != 0);
+}
+
+
+static void
+xtensa_mark_frags_for_org (void)
+{
+ segT *seclist;
+
+ /* Walk over each fragment of all of the current segments. If we find
+ a .org frag in any of the segments, mark all frags prior to it as
+ "no transform", which will prevent linker optimizations from messing
+ up the .org distance. This should be done after
+ xtensa_find_unmarked_state_frags, because we don't want to worry here
+ about that function trashing the data we save here. */
+
+ for (seclist = &stdoutput->sections;
+ seclist && *seclist;
+ seclist = &(*seclist)->next)
+ {
+ segT sec = *seclist;
+ segment_info_type *seginfo;
+ fragS *fragP;
+ flagword flags;
+ flags = bfd_get_section_flags (stdoutput, sec);
+ if (flags & SEC_DEBUGGING)
+ continue;
+ if (!(flags & SEC_ALLOC))
+ continue;
+
+ seginfo = seg_info (sec);
+ if (seginfo && seginfo->frchainP)
+ {
+ fragS *last_fragP = seginfo->frchainP->frch_root;
+ for (fragP = seginfo->frchainP->frch_root; fragP;
+ fragP = fragP->fr_next)
+ {
+ /* cvt_frag_to_fill has changed the fr_type of org frags to
+ rs_fill, so use the value as cached in rs_subtype here. */
+ if (fragP->fr_subtype == RELAX_ORG)
+ {
+ while (last_fragP != fragP->fr_next)
+ {
+ last_fragP->tc_frag_data.is_no_transform = TRUE;
+ last_fragP = last_fragP->fr_next;
+ }
+ }
+ }
+ }
+ }
}
xtensa_opcode opcode;
char *const fixpos = fixP->fx_frag->fr_literal + fixP->fx_where;
- (void) decode_reloc (fixP->fx_r_type, &slot, &alt_reloc);
- if (alt_reloc)
+ if (decode_reloc (fixP->fx_r_type, &slot, &alt_reloc)
+ || alt_reloc)
as_fatal (_("unexpected fix"));
if (!insnbuf)
linkrelax = 1;
- /* Set up the .literal, .fini.literal and .init.literal sections. */
+ /* Set up the literal sections. */
memset (&default_lit_sections, 0, sizeof (default_lit_sections));
- default_lit_sections.init_lit_seg_name = INIT_LITERAL_SECTION_NAME;
- default_lit_sections.fini_lit_seg_name = FINI_LITERAL_SECTION_NAME;
- default_lit_sections.lit_seg_name = LITERAL_SECTION_NAME;
- default_lit_sections.lit4_seg_name = LIT4_SECTION_NAME;
subseg_set (current_section, current_subsec);
xtensa_callx12_opcode = xtensa_opcode_lookup (isa, "callx12");
xtensa_const16_opcode = xtensa_opcode_lookup (isa, "const16");
xtensa_entry_opcode = xtensa_opcode_lookup (isa, "entry");
+ xtensa_extui_opcode = xtensa_opcode_lookup (isa, "extui");
xtensa_movi_opcode = xtensa_opcode_lookup (isa, "movi");
xtensa_movi_n_opcode = xtensa_opcode_lookup (isa, "movi.n");
xtensa_isync_opcode = xtensa_opcode_lookup (isa, "isync");
xtensa_rsr_lcount_opcode = xtensa_opcode_lookup (isa, "rsr.lcount");
xtensa_waiti_opcode = xtensa_opcode_lookup (isa, "waiti");
+ xtensa_num_pipe_stages = xtensa_isa_num_pipe_stages (isa);
+
init_op_placement_info_table ();
/* Set up the assembly state. */
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
- xtensa_move_labels (frag_now, 0, TRUE);
+ xtensa_move_labels (frag_now, 0);
}
/* No target aligning in the absolute section. */
RELAX_DESIRE_ALIGN_IF_TARGET,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
- xtensa_move_labels (frag_now, 0, TRUE);
+ xtensa_move_labels (frag_now, 0);
}
/* We need to mark the following properties even if we aren't aligning. */
void
xtensa_flush_pending_output (void)
{
+ /* This line fixes a bug where automatically generated gstabs info
+ separates a function label from its entry instruction, ending up
+ with the literal position between the function label and the entry
+ instruction and crashing code. It only happens with --gstabs and
+ --text-section-literals, and when several other obscure relaxation
+ conditions are met. */
+ if (outputting_stabs_line_debug)
+ return;
+
if (cur_vinsn.inside_bundle)
as_bad (_("missing closing brace"));
md_assemble (char *str)
{
xtensa_isa isa = xtensa_default_isa;
- char *opname, *file_name;
+ char *opname;
unsigned opnamelen;
bfd_boolean has_underbar = FALSE;
char *arg_strings[MAX_INSN_ARGS];
return;
}
- /* A FLIX bundle may be spread across multiple input lines. We want to
- report the first such line in the debug information. Record the line
- number for each TInsn (assume the file name doesn't change), so the
- first line can be found later. */
- as_where (&file_name, &orig_insn.linenum);
+ /* Record the line number for each TInsn, because a FLIX bundle may be
+ spread across multiple input lines and individual instructions may be
+ moved around in some cases. */
+ orig_insn.loc_directive_seen = dwarf2_loc_directive_seen;
+ dwarf2_where (&orig_insn.debug_line);
+ dwarf2_consume_line_info ();
xg_add_branch_and_loop_targets (&orig_insn);
as_bad_where (fragP->fr_file, fragP->fr_line,
_("unaligned entry instruction"));
}
+
+ if (linkrelax && fragP->fr_type == rs_org)
+ fragP->fr_subtype = RELAX_ORG;
}
if (fixP->fx_r_type == BFD_RELOC_XTENSA_ASM_EXPAND)
return 0;
+ if (fixP->fx_r_type == BFD_RELOC_32_PCREL)
+ return addr;
+
if (!insnbuf)
{
insnbuf = xtensa_insnbuf_alloc (isa);
}
+/* tc_symbol_new_hook */
+
+symbolS *expr_symbols = NULL;
+
+void
+xtensa_symbol_new_hook (symbolS *sym)
+{
+ if (is_leb128_expr && S_GET_SEGMENT (sym) == expr_section)
+ {
+ symbol_get_tc (sym)->next_expr_symbol = expr_symbols;
+ expr_symbols = sym;
+ }
+}
+
+
void
md_apply_fix (fixS *fixP, valueT *valP, segT seg)
{
switch (fixP->fx_r_type)
{
+ case BFD_RELOC_32_PCREL:
case BFD_RELOC_32:
case BFD_RELOC_16:
case BFD_RELOC_8:
readable when all branch targets are encoded in relocations. */
assert (fixP->fx_addsy);
- if (S_GET_SEGMENT (fixP->fx_addsy) == seg && !fixP->fx_plt
+ if (S_GET_SEGMENT (fixP->fx_addsy) == seg
&& !S_FORCE_RELOC (fixP->fx_addsy, 1))
{
val = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset
char *
md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[4];
- char *t;
- int i;
-
- switch (type)
- {
- case 'f':
- prec = 2;
- break;
-
- case 'd':
- prec = 4;
- break;
-
- default:
- *sizeP = 0;
- return "bad call to md_atof";
- }
-
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * 2;
-
- for (i = prec - 1; i >= 0; i--)
- {
- int idx = i;
- if (target_big_endian)
- idx = (prec - 1 - i);
-
- md_number_to_chars (litP, (valueT) words[idx], 2);
- litP += 2;
- }
-
- return NULL;
+ return ieee_md_atof (type, litP, sizeP, target_big_endian);
}
}
if (!fixp->fx_pcrel != !reloc->howto->pc_relative)
- as_fatal (_("internal error? cannot generate `%s' relocation"),
+ as_fatal (_("internal error; cannot generate `%s' relocation"),
bfd_get_reloc_code_name (fixp->fx_r_type));
return reloc;
{
xtensa_isa isa = xtensa_default_isa;
rt = new_resource_table
- (isa, xtensa_isa_num_pipe_stages (isa),
+ (isa, xtensa_num_pipe_stages,
xtensa_isa_num_funcUnits (isa),
(unit_num_copies_func) xtensa_funcUnit_num_copies,
(opcode_num_units_func) xtensa_opcode_num_funcUnit_uses,
|| orig_insn->opcode == xtensa_movi_n_opcode)
&& !cur_vinsn.inside_bundle
&& (orig_insn->tok[1].X_op == O_symbol
- || orig_insn->tok[1].X_op == O_pltrel))
+ || orig_insn->tok[1].X_op == O_pltrel)
+ && !orig_insn->is_specific_opcode && use_transform ())
xg_assembly_relax (&istack, orig_insn, now_seg, frag_now, 0, 1, 0);
else
if (xg_expand_assembly_insn (&istack, orig_insn))
bfd_boolean is_jump = FALSE;
bfd_boolean is_branch = FALSE;
xtensa_isa isa = xtensa_default_isa;
- int i;
int insn_size;
int extra_space;
char *f = NULL;
int slot;
- unsigned current_line, best_linenum;
- char *current_file;
+ struct dwarf2_line_info debug_line;
+ bfd_boolean loc_directive_seen = FALSE;
+ TInsn *tinsn;
- best_linenum = UINT_MAX;
+ memset (&debug_line, 0, sizeof (struct dwarf2_line_info));
if (generating_literals)
{
xtensa_set_frag_assembly_state (frag_now);
}
- for (i = 0; i < vinsn->num_slots; i++)
+ for (slot = 0; slot < vinsn->num_slots; slot++)
{
+ tinsn = &vinsn->slots[slot];
+
/* See if the instruction implies an aligned section. */
- if (xtensa_opcode_is_loop (isa, vinsn->slots[i].opcode) == 1)
+ if (xtensa_opcode_is_loop (isa, tinsn->opcode) == 1)
record_alignment (now_seg, 2);
- /* Also determine the best line number for debug info. */
- best_linenum = vinsn->slots[i].linenum < best_linenum
- ? vinsn->slots[i].linenum : best_linenum;
+ /* Determine the best line number for debug info. */
+ if ((tinsn->loc_directive_seen || !loc_directive_seen)
+ && (tinsn->debug_line.filenum != debug_line.filenum
+ || tinsn->debug_line.line < debug_line.line
+ || tinsn->debug_line.column < debug_line.column))
+ debug_line = tinsn->debug_line;
+ if (tinsn->loc_directive_seen)
+ loc_directive_seen = TRUE;
}
/* Special cases for instructions that force an alignment... */
{
int max_fill;
+ /* Remember the symbol that marks the end of the loop in the frag
+ that marks the start of the loop. This way we can easily find
+ the end of the loop at the beginning, without adding special code
+ to mark the loop instructions themselves. */
+ symbolS *target_sym = NULL;
+ if (vinsn->slots[0].tok[1].X_op == O_symbol)
+ target_sym = vinsn->slots[0].tok[1].X_add_symbol;
+
xtensa_set_frag_assembly_state (frag_now);
frag_now->tc_frag_data.is_insn = TRUE;
if (use_transform ())
frag_var (rs_machine_dependent, max_fill, max_fill,
- RELAX_ALIGN_NEXT_OPCODE,
- frag_now->fr_symbol,
- frag_now->fr_offset,
- NULL);
+ RELAX_ALIGN_NEXT_OPCODE, target_sym, 0, NULL);
else
frag_var (rs_machine_dependent, 0, 0,
- RELAX_CHECK_ALIGN_NEXT_OPCODE, 0, 0, NULL);
+ RELAX_CHECK_ALIGN_NEXT_OPCODE, target_sym, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
-
- xtensa_move_labels (frag_now, 0, FALSE);
}
if (vinsn->slots[0].opcode == xtensa_entry_opcode
&& !vinsn->slots[0].is_specific_opcode)
{
xtensa_mark_literal_pool_location ();
- xtensa_move_labels (frag_now, 0, TRUE);
+ xtensa_move_labels (frag_now, 0);
frag_var (rs_align_test, 1, 1, 0, NULL, 2, NULL);
}
xtensa_insnbuf_to_chars (isa, vinsn->insnbuf, (unsigned char *) f, 0);
- /* Temporarily set the logical line number to the one we want to appear
- in the debug information. */
- as_where (¤t_file, ¤t_line);
- new_logical_line (current_file, best_linenum);
- dwarf2_emit_insn (insn_size + extra_space);
- new_logical_line (current_file, current_line);
+ if (debug_type == DEBUG_DWARF2 || loc_directive_seen)
+ dwarf2_gen_line_info (frag_now_fix () - (insn_size + extra_space),
+ &debug_line);
for (slot = 0; slot < vinsn->num_slots; slot++)
{
- TInsn *tinsn = &vinsn->slots[slot];
+ tinsn = &vinsn->slots[slot];
frag_now->tc_frag_data.slot_subtypes[slot] = tinsn->subtype;
frag_now->tc_frag_data.slot_symbols[slot] = tinsn->symbol;
frag_now->tc_frag_data.slot_offsets[slot] = tinsn->offset;
when converting them. */
/* "short_loop": Add a NOP if the loop is < 4 bytes. */
- if (xtensa_opcode_is_loop (isa, vinsn->slots[0].opcode)
+ if (xtensa_opcode_is_loop (isa, vinsn->slots[0].opcode) == 1
&& !vinsn->slots[0].is_specific_opcode)
{
if (workaround_short_loop && use_transform ())
static void xtensa_fix_target_frags (void);
static void xtensa_mark_narrow_branches (void);
static void xtensa_mark_zcl_first_insns (void);
+static void xtensa_mark_difference_of_two_symbols (void);
static void xtensa_fix_a0_b_retw_frags (void);
static void xtensa_fix_b_j_loop_end_frags (void);
static void xtensa_fix_close_loop_end_frags (void);
static void xtensa_fix_short_loop_frags (void);
static void xtensa_sanity_check (void);
+static void xtensa_add_config_info (void);
void
xtensa_end (void)
xtensa_mark_zcl_first_insns ();
xtensa_sanity_check ();
+
+ xtensa_add_config_info ();
}
xtensa_cleanup_align_frags (void)
{
frchainS *frchP;
+ asection *s;
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if ((fragP->fr_type == rs_align
- || fragP->fr_type == rs_align_code
- || (fragP->fr_type == rs_machine_dependent
- && (fragP->fr_subtype == RELAX_DESIRE_ALIGN
- || fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)))
- && fragP->fr_fix == 0)
- {
- fragS *next = fragP->fr_next;
-
- while (next
- && next->fr_fix == 0
- && next->fr_type == rs_machine_dependent
- && next->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
- {
- frag_wane (next);
- next = next->fr_next;
- }
- }
- /* If we don't widen branch targets, then they
- will be easier to align. */
- if (fragP->tc_frag_data.is_branch_target
- && fragP->fr_opcode == fragP->fr_literal
- && fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_SLOTS
- && fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
- frag_wane (fragP);
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_UNREACHABLE)
- fragP->tc_frag_data.is_unreachable = TRUE;
- }
- }
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if ((fragP->fr_type == rs_align
+ || fragP->fr_type == rs_align_code
+ || (fragP->fr_type == rs_machine_dependent
+ && (fragP->fr_subtype == RELAX_DESIRE_ALIGN
+ || fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)))
+ && fragP->fr_fix == 0)
+ {
+ fragS *next = fragP->fr_next;
+
+ while (next
+ && next->fr_fix == 0
+ && next->fr_type == rs_machine_dependent
+ && next->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
+ {
+ frag_wane (next);
+ next = next->fr_next;
+ }
+ }
+ /* If we don't widen branch targets, then they
+ will be easier to align. */
+ if (fragP->tc_frag_data.is_branch_target
+ && fragP->fr_opcode == fragP->fr_literal
+ && fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_SLOTS
+ && fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
+ frag_wane (fragP);
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_UNREACHABLE)
+ fragP->tc_frag_data.is_unreachable = TRUE;
+ }
+ }
}
xtensa_fix_target_frags (void)
{
frchainS *frchP;
+ asection *s;
/* When this routine is called, all of the subsections are still intact
so we walk over subsections instead of sections. */
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
-
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
- {
- if (next_frag_is_branch_target (fragP))
- fragP->fr_subtype = RELAX_DESIRE_ALIGN;
- else
- frag_wane (fragP);
- }
- }
- }
-}
-
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
+ {
+ if (next_frag_is_branch_target (fragP))
+ fragP->fr_subtype = RELAX_DESIRE_ALIGN;
+ else
+ frag_wane (fragP);
+ }
+ }
+ }
+}
-static bfd_boolean is_narrow_branch_guaranteed_in_range (fragS *, TInsn *);
+
+static bfd_boolean is_narrow_branch_guaranteed_in_range (fragS *, TInsn *);
static void
xtensa_mark_narrow_branches (void)
{
frchainS *frchP;
+ asection *s;
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_SLOTS
- && fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED)
- {
- vliw_insn vinsn;
-
- vinsn_from_chars (&vinsn, fragP->fr_opcode);
- tinsn_immed_from_frag (&vinsn.slots[0], fragP, 0);
-
- if (vinsn.num_slots == 1
- && xtensa_opcode_is_branch (xtensa_default_isa,
- vinsn.slots[0].opcode)
- && xg_get_single_size (vinsn.slots[0].opcode) == 2
- && is_narrow_branch_guaranteed_in_range (fragP,
- &vinsn.slots[0]))
- {
- fragP->fr_subtype = RELAX_SLOTS;
- fragP->tc_frag_data.slot_subtypes[0] = RELAX_NARROW;
- fragP->tc_frag_data.is_aligning_branch = 1;
- }
- }
- }
- }
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_SLOTS
+ && fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED)
+ {
+ vliw_insn vinsn;
+
+ vinsn_from_chars (&vinsn, fragP->fr_opcode);
+ tinsn_immed_from_frag (&vinsn.slots[0], fragP, 0);
+
+ if (vinsn.num_slots == 1
+ && xtensa_opcode_is_branch (xtensa_default_isa,
+ vinsn.slots[0].opcode) == 1
+ && xg_get_single_size (vinsn.slots[0].opcode) == 2
+ && is_narrow_branch_guaranteed_in_range (fragP,
+ &vinsn.slots[0]))
+ {
+ fragP->fr_subtype = RELAX_SLOTS;
+ fragP->tc_frag_data.slot_subtypes[0] = RELAX_NARROW;
+ fragP->tc_frag_data.is_aligning_branch = 1;
+ }
+ }
+ }
+ }
}
xtensa_mark_zcl_first_insns (void)
{
frchainS *frchP;
+ asection *s;
+
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE
+ || fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE))
+ {
+ /* Find the loop frag. */
+ fragS *targ_frag = next_non_empty_frag (fragP);
+ /* Find the first insn frag. */
+ targ_frag = next_non_empty_frag (targ_frag);
+
+ /* Of course, sometimes (mostly for toy test cases) a
+ zero-cost loop instruction is the last in a section. */
+ if (targ_frag)
+ {
+ targ_frag->tc_frag_data.is_first_loop_insn = TRUE;
+ /* Do not widen a frag that is the first instruction of a
+ zero-cost loop. It makes that loop harder to align. */
+ if (targ_frag->fr_type == rs_machine_dependent
+ && targ_frag->fr_subtype == RELAX_SLOTS
+ && (targ_frag->tc_frag_data.slot_subtypes[0]
+ == RELAX_NARROW))
+ {
+ if (targ_frag->tc_frag_data.is_aligning_branch)
+ targ_frag->tc_frag_data.slot_subtypes[0] = RELAX_IMMED;
+ else
+ {
+ frag_wane (targ_frag);
+ targ_frag->tc_frag_data.slot_subtypes[0] = 0;
+ }
+ }
+ }
+ if (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)
+ frag_wane (fragP);
+ }
+ }
+ }
+}
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
+
+/* When a difference-of-symbols expression is encoded as a uleb128 or
+ sleb128 value, the linker is unable to adjust that value to account for
+ link-time relaxation. Mark all the code between such symbols so that
+ its size cannot be changed by linker relaxation. */
+
+static void
+xtensa_mark_difference_of_two_symbols (void)
+{
+ symbolS *expr_sym;
+
+ for (expr_sym = expr_symbols; expr_sym;
+ expr_sym = symbol_get_tc (expr_sym)->next_expr_symbol)
{
- fragS *fragP;
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ expressionS *expr = symbol_get_value_expression (expr_sym);
+
+ if (expr->X_op == O_subtract)
{
- if (fragP->fr_type == rs_machine_dependent
- && (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE
- || fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE))
+ symbolS *left = expr->X_add_symbol;
+ symbolS *right = expr->X_op_symbol;
+
+ /* Difference of two symbols not in the same section
+ are handled with relocations in the linker. */
+ if (S_GET_SEGMENT (left) == S_GET_SEGMENT (right))
{
- /* Find the loop frag. */
- fragS *targ_frag = next_non_empty_frag (fragP);
- /* Find the first insn frag. */
- targ_frag = next_non_empty_frag (targ_frag);
-
- /* Of course, sometimes (mostly for toy test cases) a
- zero-cost loop instruction is the last in a section. */
- if (targ_frag)
+ fragS *start;
+ fragS *end;
+
+ if (symbol_get_frag (left)->fr_address
+ <= symbol_get_frag (right)->fr_address)
{
- targ_frag->tc_frag_data.is_first_loop_insn = TRUE;
- /* Do not widen a frag that is the first instruction of a
- zero-cost loop. It makes that loop harder to align. */
- if (targ_frag->fr_type == rs_machine_dependent
- && targ_frag->fr_subtype == RELAX_SLOTS
- && (targ_frag->tc_frag_data.slot_subtypes[0]
- == RELAX_NARROW))
- {
- if (targ_frag->tc_frag_data.is_aligning_branch)
- targ_frag->tc_frag_data.slot_subtypes[0] = RELAX_IMMED;
- else
- {
- frag_wane (targ_frag);
- targ_frag->tc_frag_data.slot_subtypes[0] = 0;
- }
- }
+ start = symbol_get_frag (left);
+ end = symbol_get_frag (right);
}
- if (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)
- frag_wane (fragP);
+ else
+ {
+ start = symbol_get_frag (right);
+ end = symbol_get_frag (left);
+ }
+ do
+ {
+ start->tc_frag_data.is_no_transform = 1;
+ start = start->fr_next;
+ }
+ while (start && start->fr_address < end->fr_address);
}
}
}
xtensa_fix_a0_b_retw_frags (void)
{
frchainS *frchP;
+ asection *s;
/* When this routine is called, all of the subsections are still intact
so we walk over subsections instead of sections. */
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_ADD_NOP_IF_A0_B_RETW)
- {
- if (next_instrs_are_b_retw (fragP))
- {
- if (fragP->tc_frag_data.is_no_transform)
- as_bad (_("instruction sequence (write a0, branch, retw) may trigger hardware errata"));
- else
- relax_frag_add_nop (fragP);
- }
- frag_wane (fragP);
- }
- }
- }
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_ADD_NOP_IF_A0_B_RETW)
+ {
+ if (next_instrs_are_b_retw (fragP))
+ {
+ if (fragP->tc_frag_data.is_no_transform)
+ as_bad (_("instruction sequence (write a0, branch, retw) may trigger hardware errata"));
+ else
+ relax_frag_add_nop (fragP);
+ }
+ frag_wane (fragP);
+ }
+ }
+ }
}
xtensa_fix_b_j_loop_end_frags (void)
{
frchainS *frchP;
+ asection *s;
/* When this routine is called, all of the subsections are still intact
so we walk over subsections instead of sections. */
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_ADD_NOP_IF_PRE_LOOP_END)
- {
- if (next_instr_is_loop_end (fragP))
- {
- if (fragP->tc_frag_data.is_no_transform)
- as_bad (_("branching or jumping to a loop end may trigger hardware errata"));
- else
- relax_frag_add_nop (fragP);
- }
- frag_wane (fragP);
- }
- }
- }
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_ADD_NOP_IF_PRE_LOOP_END)
+ {
+ if (next_instr_is_loop_end (fragP))
+ {
+ if (fragP->tc_frag_data.is_no_transform)
+ as_bad (_("branching or jumping to a loop end may trigger hardware errata"));
+ else
+ relax_frag_add_nop (fragP);
+ }
+ frag_wane (fragP);
+ }
+ }
+ }
}
.fill 0. */
static offsetT min_bytes_to_other_loop_end
- (fragS *, fragS *, offsetT, offsetT);
+ (fragS *, fragS *, offsetT);
static void
xtensa_fix_close_loop_end_frags (void)
{
frchainS *frchP;
+ asection *s;
/* When this routine is called, all of the subsections are still intact
so we walk over subsections instead of sections. */
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
- fragS *current_target = NULL;
- offsetT current_offset = 0;
+ fragS *current_target = NULL;
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if (fragP->fr_type == rs_machine_dependent
- && ((fragP->fr_subtype == RELAX_IMMED)
- || ((fragP->fr_subtype == RELAX_SLOTS)
- && (fragP->tc_frag_data.slot_subtypes[0]
- == RELAX_IMMED))))
- {
- /* Read it. If the instruction is a loop, get the target. */
- TInsn t_insn;
- tinsn_from_chars (&t_insn, fragP->fr_opcode, 0);
- if (xtensa_opcode_is_loop (xtensa_default_isa,
- t_insn.opcode) == 1)
- {
- /* Get the current fragment target. */
- if (fragP->tc_frag_data.slot_symbols[0])
- {
- symbolS *sym = fragP->tc_frag_data.slot_symbols[0];
- current_target = symbol_get_frag (sym);
- current_offset = fragP->fr_offset;
- }
- }
- }
-
- if (current_target
- && fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_ADD_NOP_IF_CLOSE_LOOP_END)
- {
- offsetT min_bytes;
- int bytes_added = 0;
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && ((fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE)
+ || (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)))
+ current_target = symbol_get_frag (fragP->fr_symbol);
+
+ if (current_target
+ && fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_ADD_NOP_IF_CLOSE_LOOP_END)
+ {
+ offsetT min_bytes;
+ int bytes_added = 0;
#define REQUIRED_LOOP_DIVIDING_BYTES 12
- /* Max out at 12. */
- min_bytes = min_bytes_to_other_loop_end
- (fragP->fr_next, current_target, current_offset,
- REQUIRED_LOOP_DIVIDING_BYTES);
-
- if (min_bytes < REQUIRED_LOOP_DIVIDING_BYTES)
- {
- if (fragP->tc_frag_data.is_no_transform)
- as_bad (_("loop end too close to another loop end may trigger hardware errata"));
- else
- {
- while (min_bytes + bytes_added
- < REQUIRED_LOOP_DIVIDING_BYTES)
- {
- int length = 3;
-
- if (fragP->fr_var < length)
- as_fatal (_("fr_var %lu < length %d"),
- (long) fragP->fr_var, length);
- else
- {
- assemble_nop (length,
- fragP->fr_literal + fragP->fr_fix);
- fragP->fr_fix += length;
- fragP->fr_var -= length;
- }
- bytes_added += length;
- }
- }
- }
- frag_wane (fragP);
- }
- assert (fragP->fr_type != rs_machine_dependent
- || fragP->fr_subtype != RELAX_ADD_NOP_IF_CLOSE_LOOP_END);
- }
- }
+ /* Max out at 12. */
+ min_bytes = min_bytes_to_other_loop_end
+ (fragP->fr_next, current_target, REQUIRED_LOOP_DIVIDING_BYTES);
+
+ if (min_bytes < REQUIRED_LOOP_DIVIDING_BYTES)
+ {
+ if (fragP->tc_frag_data.is_no_transform)
+ as_bad (_("loop end too close to another loop end may trigger hardware errata"));
+ else
+ {
+ while (min_bytes + bytes_added
+ < REQUIRED_LOOP_DIVIDING_BYTES)
+ {
+ int length = 3;
+
+ if (fragP->fr_var < length)
+ as_fatal (_("fr_var %lu < length %d"),
+ (long) fragP->fr_var, length);
+ else
+ {
+ assemble_nop (length,
+ fragP->fr_literal + fragP->fr_fix);
+ fragP->fr_fix += length;
+ fragP->fr_var -= length;
+ }
+ bytes_added += length;
+ }
+ }
+ }
+ frag_wane (fragP);
+ }
+ assert (fragP->fr_type != rs_machine_dependent
+ || fragP->fr_subtype != RELAX_ADD_NOP_IF_CLOSE_LOOP_END);
+ }
+ }
}
static offsetT
min_bytes_to_other_loop_end (fragS *fragP,
fragS *current_target,
- offsetT current_offset,
offsetT max_size)
{
offsetT offset = 0;
{
if (current_fragP->tc_frag_data.is_loop_target
&& current_fragP != current_target)
- return offset + current_offset;
+ return offset;
offset += unrelaxed_frag_min_size (current_fragP);
- if (offset + current_offset >= max_size)
+ if (offset >= max_size)
return max_size;
}
return max_size;
xtensa_fix_short_loop_frags (void)
{
frchainS *frchP;
+ asection *s;
/* When this routine is called, all of the subsections are still intact
so we walk over subsections instead of sections. */
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
- fragS *current_target = NULL;
- offsetT current_offset = 0;
- xtensa_opcode current_opcode = XTENSA_UNDEFINED;
-
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- /* Check on the current loop. */
- if (fragP->fr_type == rs_machine_dependent
- && ((fragP->fr_subtype == RELAX_IMMED)
- || ((fragP->fr_subtype == RELAX_SLOTS)
- && (fragP->tc_frag_data.slot_subtypes[0]
- == RELAX_IMMED))))
- {
- TInsn t_insn;
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+ fragS *current_target = NULL;
+ xtensa_opcode current_opcode = XTENSA_UNDEFINED;
- /* Read it. If the instruction is a loop, get the target. */
- tinsn_from_chars (&t_insn, fragP->fr_opcode, 0);
- if (xtensa_opcode_is_loop (xtensa_default_isa,
- t_insn.opcode) == 1)
- {
- /* Get the current fragment target. */
- if (fragP->tc_frag_data.slot_symbols[0])
- {
- symbolS *sym = fragP->tc_frag_data.slot_symbols[0];
- current_target = symbol_get_frag (sym);
- current_offset = fragP->fr_offset;
- current_opcode = t_insn.opcode;
- }
- }
- }
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && ((fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE)
+ || (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)))
+ {
+ TInsn t_insn;
+ fragS *loop_frag = next_non_empty_frag (fragP);
+ tinsn_from_chars (&t_insn, loop_frag->fr_opcode, 0);
+ current_target = symbol_get_frag (fragP->fr_symbol);
+ current_opcode = t_insn.opcode;
+ assert (xtensa_opcode_is_loop (xtensa_default_isa,
+ current_opcode) == 1);
+ }
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_ADD_NOP_IF_SHORT_LOOP)
- {
- if (count_insns_to_loop_end (fragP->fr_next, TRUE, 3) < 3
- && (branch_before_loop_end (fragP->fr_next)
- || (workaround_all_short_loops
- && current_opcode != XTENSA_UNDEFINED
- && current_opcode != xtensa_loop_opcode)))
- {
- if (fragP->tc_frag_data.is_no_transform)
- as_bad (_("loop containing less than three instructions may trigger hardware errata"));
- else
- relax_frag_add_nop (fragP);
- }
- frag_wane (fragP);
- }
- }
- }
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_ADD_NOP_IF_SHORT_LOOP)
+ {
+ if (count_insns_to_loop_end (fragP->fr_next, TRUE, 3) < 3
+ && (branch_before_loop_end (fragP->fr_next)
+ || (workaround_all_short_loops
+ && current_opcode != XTENSA_UNDEFINED
+ && current_opcode != xtensa_loop_opcode)))
+ {
+ if (fragP->tc_frag_data.is_no_transform)
+ as_bad (_("loop containing less than three instructions may trigger hardware errata"));
+ else
+ relax_frag_add_nop (fragP);
+ }
+ frag_wane (fragP);
+ }
+ }
+ }
}
{
char *file_name;
unsigned line;
-
frchainS *frchP;
+ asection *s;
as_where (&file_name, &line);
- for (frchP = frchain_root; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
-
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- /* Currently we only check for empty loops here. */
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_IMMED)
- {
- static xtensa_insnbuf insnbuf = NULL;
- TInsn t_insn;
-
- if (fragP->fr_opcode != NULL)
- {
- if (!insnbuf)
- insnbuf = xtensa_insnbuf_alloc (xtensa_default_isa);
- tinsn_from_chars (&t_insn, fragP->fr_opcode, 0);
- tinsn_immed_from_frag (&t_insn, fragP, 0);
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
- if (xtensa_opcode_is_loop (xtensa_default_isa,
- t_insn.opcode) == 1)
- {
- if (is_empty_loop (&t_insn, fragP))
- {
- new_logical_line (fragP->fr_file, fragP->fr_line);
- as_bad (_("invalid empty loop"));
- }
- if (!is_local_forward_loop (&t_insn, fragP))
- {
- new_logical_line (fragP->fr_file, fragP->fr_line);
- as_bad (_("loop target does not follow "
- "loop instruction in section"));
- }
- }
- }
- }
- }
- }
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_SLOTS
+ && fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED)
+ {
+ static xtensa_insnbuf insnbuf = NULL;
+ TInsn t_insn;
+
+ if (fragP->fr_opcode != NULL)
+ {
+ if (!insnbuf)
+ insnbuf = xtensa_insnbuf_alloc (xtensa_default_isa);
+ tinsn_from_chars (&t_insn, fragP->fr_opcode, 0);
+ tinsn_immed_from_frag (&t_insn, fragP, 0);
+
+ if (xtensa_opcode_is_loop (xtensa_default_isa,
+ t_insn.opcode) == 1)
+ {
+ if (is_empty_loop (&t_insn, fragP))
+ {
+ new_logical_line (fragP->fr_file, fragP->fr_line);
+ as_bad (_("invalid empty loop"));
+ }
+ if (!is_local_forward_loop (&t_insn, fragP))
+ {
+ new_logical_line (fragP->fr_file, fragP->fr_line);
+ as_bad (_("loop target does not follow "
+ "loop instruction in section"));
+ }
+ }
+ }
+ }
+ }
+ }
new_logical_line (file_name, line);
}
if (insn->insn_type != ITYPE_INSN)
return FALSE;
- if (xtensa_opcode_is_loop (xtensa_default_isa, insn->opcode) == 0)
+ if (xtensa_opcode_is_loop (xtensa_default_isa, insn->opcode) != 1)
return FALSE;
if (insn->ntok <= LOOP_IMMED_OPN)
return FALSE;
}
+
+#define XTINFO_NAME "Xtensa_Info"
+#define XTINFO_NAMESZ 12
+#define XTINFO_TYPE 1
+
+static void
+xtensa_add_config_info (void)
+{
+ asection *info_sec;
+ char *data, *p;
+ int sz;
+
+ info_sec = subseg_new (".xtensa.info", 0);
+ bfd_set_section_flags (stdoutput, info_sec, SEC_HAS_CONTENTS | SEC_READONLY);
+
+ data = xmalloc (100);
+ sprintf (data, "USE_ABSOLUTE_LITERALS=%d\nABI=%d\n",
+ XSHAL_USE_ABSOLUTE_LITERALS, XSHAL_ABI);
+ sz = strlen (data) + 1;
+
+ /* Add enough null terminators to pad to a word boundary. */
+ do
+ data[sz++] = 0;
+ while ((sz & 3) != 0);
+
+ /* Follow the standard note section layout:
+ First write the length of the name string. */
+ p = frag_more (4);
+ md_number_to_chars (p, (valueT) XTINFO_NAMESZ, 4);
+
+ /* Next comes the length of the "descriptor", i.e., the actual data. */
+ p = frag_more (4);
+ md_number_to_chars (p, (valueT) sz, 4);
+
+ /* Write the note type. */
+ p = frag_more (4);
+ md_number_to_chars (p, (valueT) XTINFO_TYPE, 4);
+
+ /* Write the name field. */
+ p = frag_more (XTINFO_NAMESZ);
+ memcpy (p, XTINFO_NAME, XTINFO_NAMESZ);
+
+ /* Finally, write the descriptor. */
+ p = frag_more (sz);
+ memcpy (p, data, sz);
+
+ free (data);
+}
+
\f
/* Alignment Functions. */
int align_power;
offsetT opt_diff;
offsetT branch_align;
+ fragS *loop_frag;
assert (fragP->fr_type == rs_machine_dependent);
switch (fragP->fr_subtype)
return opt_diff;
case RELAX_ALIGN_NEXT_OPCODE:
- target_size = get_loop_align_size (next_frag_format_size (fragP));
+ /* The next non-empty frag after this one holds the LOOP instruction
+ that needs to be aligned. The required alignment depends on the
+ size of the next non-empty frag after the loop frag, i.e., the
+ first instruction in the loop. */
+ loop_frag = next_non_empty_frag (fragP);
+ target_size = get_loop_align_size (next_frag_format_size (loop_frag));
loop_insn_offset = 0;
is_loop = next_frag_opcode_is_loop (fragP, &loop_opcode);
assert (is_loop);
/* If the loop has been expanded then the LOOP instruction
could be at an offset from this fragment. */
- if (next_non_empty_frag(fragP)->tc_frag_data.slot_subtypes[0]
- != RELAX_IMMED)
+ if (loop_frag->tc_frag_data.slot_subtypes[0] != RELAX_IMMED)
loop_insn_offset = get_expanded_loop_offset (loop_opcode);
/* In an ideal world, which is what we are shooting for here,
will call get_noop_aligned_address. */
target_address =
address + loop_insn_offset + xg_get_single_size (loop_opcode);
- align_power = get_text_align_power (target_size),
+ align_power = get_text_align_power (target_size);
opt_diff = get_text_align_fill_size (target_address, align_power,
target_size, FALSE, FALSE);
case RELAX_IMMED:
case RELAX_IMMED_STEP1:
case RELAX_IMMED_STEP2:
+ case RELAX_IMMED_STEP3:
/* Place the immediate. */
new_stretch += relax_frag_immed
(now_seg, fragP, stretch,
c 0 2 1 (case 5b makes this case unnecessary)
6a 2 0 0
b 1 0 3
- c 0 1 4 (case 6b makes this case unneccesary)
+ c 0 1 4 (case 6b makes this case unnecessary)
d 1 1 1 (case 6a makes this case unnecessary)
e 0 2 2 (case 6a makes this case unnecessary)
f 0 3 0 (case 6a makes this case unnecessary)
int old_size;
bfd_boolean negatable_branch = FALSE;
bfd_boolean branch_jmp_to_next = FALSE;
- bfd_boolean wide_insn = FALSE;
+ bfd_boolean from_wide_insn = FALSE;
xtensa_isa isa = xtensa_default_isa;
IStack istack;
offsetT frag_offset;
int num_steps;
- fragS *lit_fragP;
int num_text_bytes, num_literal_bytes;
- int literal_diff, total_text_diff, this_text_diff, first;
+ int literal_diff, total_text_diff, this_text_diff;
assert (fragP->fr_opcode != NULL);
xg_clear_vinsn (&cur_vinsn);
vinsn_from_chars (&cur_vinsn, fragP->fr_opcode);
if (cur_vinsn.num_slots > 1)
- wide_insn = TRUE;
+ from_wide_insn = TRUE;
tinsn = cur_vinsn.slots[slot];
tinsn_immed_from_frag (&tinsn, fragP, slot);
- if (estimate_only && xtensa_opcode_is_loop (isa, tinsn.opcode))
+ if (estimate_only && xtensa_opcode_is_loop (isa, tinsn.opcode) == 1)
return 0;
if (workaround_b_j_loop_end && ! fragP->tc_frag_data.is_no_transform)
istack_init (&istack);
num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP, frag_offset,
min_steps, stretch);
- if (num_steps < min_steps)
- {
- as_fatal (_("internal error: relaxation failed"));
- return 0;
- }
-
- if (num_steps > RELAX_IMMED_MAXSTEPS)
- {
- as_fatal (_("internal error: relaxation requires too many steps"));
- return 0;
- }
+ assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
fragP->tc_frag_data.slot_subtypes[slot] = (int) RELAX_IMMED + num_steps;
/* Figure out the number of bytes needed. */
- lit_fragP = 0;
num_literal_bytes = get_num_stack_literal_bytes (&istack);
- literal_diff =
- num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
- first = 0;
- while (istack.insn[first].opcode == XTENSA_UNDEFINED)
- first++;
+ literal_diff
+ = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
num_text_bytes = get_num_stack_text_bytes (&istack);
- if (wide_insn)
+
+ if (from_wide_insn)
{
+ int first = 0;
+ while (istack.insn[first].opcode == XTENSA_UNDEFINED)
+ first++;
+
num_text_bytes += old_size;
if (opcode_fits_format_slot (istack.insn[first].opcode, fmt, slot))
num_text_bytes -= xg_get_single_size (istack.insn[first].opcode);
+ else
+ {
+ /* The first instruction in the relaxed sequence will go after
+ the current wide instruction, and thus its symbolic immediates
+ might not fit. */
+
+ istack_init (&istack);
+ num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP,
+ frag_offset + old_size,
+ min_steps, stretch + old_size);
+ assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
+
+ fragP->tc_frag_data.slot_subtypes[slot]
+ = (int) RELAX_IMMED + num_steps;
+
+ num_literal_bytes = get_num_stack_literal_bytes (&istack);
+ literal_diff
+ = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
+
+ num_text_bytes = get_num_stack_text_bytes (&istack) + old_size;
+ }
}
+
total_text_diff = num_text_bytes - old_size;
this_text_diff = total_text_diff - fragP->tc_frag_data.text_expansion[slot];
/* Find the associated expandable literal for this. */
if (literal_diff != 0)
{
- lit_fragP = fragP->tc_frag_data.literal_frags[slot];
+ fragS *lit_fragP = fragP->tc_frag_data.literal_frags[slot];
if (lit_fragP)
{
assert (literal_diff == 4);
case RELAX_IMMED:
case RELAX_IMMED_STEP1:
case RELAX_IMMED_STEP2:
+ case RELAX_IMMED_STEP3:
/* Place the immediate. */
convert_frag_immed
(sec, fragp,
bfd_boolean branch_jmp_to_next = FALSE;
char *fr_opcode = fragP->fr_opcode;
xtensa_isa isa = xtensa_default_isa;
- bfd_boolean wide_insn = FALSE;
+ bfd_boolean from_wide_insn = FALSE;
int bytes;
bfd_boolean is_loop;
vinsn_from_chars (&cur_vinsn, fr_opcode);
if (cur_vinsn.num_slots > 1)
- wide_insn = TRUE;
+ from_wide_insn = TRUE;
orig_tinsn = cur_vinsn.slots[slot];
tinsn_immed_from_frag (&orig_tinsn, fragP, slot);
break;
case ITYPE_INSN:
- if (first && wide_insn)
+ if (first && from_wide_insn)
{
target_offset += xtensa_format_length (isa, fmt);
first = FALSE;
/* Add a fixup. */
target_seg = S_GET_SEGMENT (lit_sym);
assert (target_seg);
- if (tinsn->tok[0].X_op == O_pltrel)
- reloc_type = BFD_RELOC_XTENSA_PLT;
- else
- reloc_type = BFD_RELOC_32;
+ reloc_type = map_operator_to_reloc (tinsn->tok[0].X_op);
fix_new_exp_in_seg (target_seg, 0, lit_frag, 0, 4,
&tinsn->tok[0], FALSE, reloc_type);
break;
case ITYPE_INSN:
xg_resolve_labels (tinsn, gen_label);
xg_resolve_literals (tinsn, lit_sym);
- if (wide_insn && first)
+ if (from_wide_insn && first)
{
first = FALSE;
if (opcode_fits_format_slot (tinsn->opcode, fmt, slot))
target = 0;
}
- know (symbolP);
- know (symbolP->sy_frag);
- know (!(S_GET_SEGMENT (symbolP) == absolute_section)
- || symbol_get_frag (symbolP) == &zero_address_frag);
-
loop_length = target - (fragP->fr_address + fragP->fr_fix);
loop_length_hi = loop_length & ~0x0ff;
loop_length_lo = loop_length & 0x0ff;
sym_list *lit;
mark_literal_frags (literal_head->next);
- mark_literal_frags (init_literal_head->next);
- mark_literal_frags (fini_literal_head->next);
if (use_literal_section)
return;
- segment = literal_head->next;
- while (segment)
+ for (segment = literal_head->next; segment; segment = segment->next)
{
+ /* Keep the literals for .init and .fini in separate sections. */
+ if (!strcmp (segment_name (segment->seg), INIT_SECTION_NAME)
+ || !strcmp (segment_name (segment->seg), FINI_SECTION_NAME))
+ continue;
+
frchain_from = seg_info (segment->seg)->frchainP;
search_frag = frchain_from->frch_root;
literal_pool = NULL;
frchain_to = literal_pool->tc_frag_data.lit_frchain;
assert (frchain_to);
}
- insert_after = literal_pool;
-
- while (insert_after->fr_next->fr_subtype != RELAX_LITERAL_POOL_END)
- insert_after = insert_after->fr_next;
-
+ insert_after = literal_pool->tc_frag_data.literal_frag;
dest_seg = insert_after->fr_next->tc_frag_data.lit_seg;
*frag_splice = next_frag;
search_frag->fr_next = insert_after->fr_next;
insert_after->fr_next = search_frag;
search_frag->tc_frag_data.lit_seg = dest_seg;
+ literal_pool->tc_frag_data.literal_frag = search_frag;
/* Now move any fixups associated with this frag to the
right section. */
}
frchain_from->fix_tail = NULL;
xtensa_restore_emit_state (&state);
- segment = segment->next;
}
/* Now fix up the SEGMENT value for all the literal symbols. */
/* Now that we have the last section, push all the literal
sections to the end. */
xtensa_reorder_seg_list (literal_head, last_sec);
- xtensa_reorder_seg_list (init_literal_head, last_sec);
- xtensa_reorder_seg_list (fini_literal_head, last_sec);
/* Now perform the final error check. */
for (sec = stdoutput->sections; sec != NULL; sec = sec->next)
{
if (directive_state[directive_absolute_literals])
{
- cache_literal_section (0, default_lit_sections.lit4_seg_name,
- &default_lit_sections.lit4_seg, FALSE);
- xtensa_switch_section_emit_state (result,
- default_lit_sections.lit4_seg, 0);
+ segT lit4_seg = cache_literal_section (TRUE);
+ xtensa_switch_section_emit_state (result, lit4_seg, 0);
}
else
xtensa_switch_to_non_abs_literal_fragment (result);
static void
xtensa_switch_to_non_abs_literal_fragment (emit_state *result)
{
- /* When we mark a literal pool location, we want to put a frag in
- the literal pool that points to it. But to do that, we want to
- switch_to_literal_fragment. But literal sections don't have
- literal pools, so their location is always null, so we would
- recurse forever. This is kind of hacky, but it works. */
-
static bfd_boolean recursive = FALSE;
fragS *pool_location = get_literal_pool_location (now_seg);
+ segT lit_seg;
bfd_boolean is_init =
(now_seg && !strcmp (segment_name (now_seg), INIT_SECTION_NAME));
-
bfd_boolean is_fini =
(now_seg && !strcmp (segment_name (now_seg), FINI_SECTION_NAME));
&& !is_init && ! is_fini)
{
as_bad (_("literal pool location required for text-section-literals; specify with .literal_position"));
+
+ /* When we mark a literal pool location, we want to put a frag in
+ the literal pool that points to it. But to do that, we want to
+ switch_to_literal_fragment. But literal sections don't have
+ literal pools, so their location is always null, so we would
+ recurse forever. This is kind of hacky, but it works. */
+
recursive = TRUE;
xtensa_mark_literal_pool_location ();
recursive = FALSE;
}
- /* Special case: If we are in the ".fini" or ".init" section, then
- we will ALWAYS be generating to the ".fini.literal" and
- ".init.literal" sections. */
-
- if (is_init)
- {
- cache_literal_section (init_literal_head,
- default_lit_sections.init_lit_seg_name,
- &default_lit_sections.init_lit_seg, TRUE);
- xtensa_switch_section_emit_state (result,
- default_lit_sections.init_lit_seg, 0);
- }
- else if (is_fini)
- {
- cache_literal_section (fini_literal_head,
- default_lit_sections.fini_lit_seg_name,
- &default_lit_sections.fini_lit_seg, TRUE);
- xtensa_switch_section_emit_state (result,
- default_lit_sections.fini_lit_seg, 0);
- }
- else
- {
- cache_literal_section (literal_head,
- default_lit_sections.lit_seg_name,
- &default_lit_sections.lit_seg, TRUE);
- xtensa_switch_section_emit_state (result,
- default_lit_sections.lit_seg, 0);
- }
+ lit_seg = cache_literal_section (FALSE);
+ xtensa_switch_section_emit_state (result, lit_seg, 0);
if (!use_literal_section
&& !is_init && !is_fini
}
-/* Get a segment of a given name. If the segment is already
- present, return it; otherwise, create a new one. */
+/* Predicate function used to look up a section in a particular group. */
-static void
-cache_literal_section (seg_list *head,
- const char *name,
- segT *pseg,
- bfd_boolean is_code)
+static bfd_boolean
+match_section_group (bfd *abfd ATTRIBUTE_UNUSED, asection *sec, void *inf)
{
- segT current_section = now_seg;
- int current_subsec = now_subseg;
- segT seg;
+ const char *gname = inf;
+ const char *group_name = elf_group_name (sec);
+
+ return (group_name == gname
+ || (group_name != NULL
+ && gname != NULL
+ && strcmp (group_name, gname) == 0));
+}
- if (*pseg != 0)
- return;
- /* Check if the named section exists. */
- for (seg = stdoutput->sections; seg; seg = seg->next)
+/* Get the literal section to be used for the current text section.
+ The result may be cached in the default_lit_sections structure. */
+
+static segT
+cache_literal_section (bfd_boolean use_abs_literals)
+{
+ const char *text_name, *group_name = 0;
+ char *base_name, *name, *suffix;
+ segT *pcached;
+ segT seg, current_section;
+ int current_subsec;
+ bfd_boolean linkonce = FALSE;
+
+ /* Save the current section/subsection. */
+ current_section = now_seg;
+ current_subsec = now_subseg;
+
+ /* Clear the cached values if they are no longer valid. */
+ if (now_seg != default_lit_sections.current_text_seg)
{
- if (!strcmp (segment_name (seg), name))
- break;
+ default_lit_sections.current_text_seg = now_seg;
+ default_lit_sections.lit_seg = NULL;
+ default_lit_sections.lit4_seg = NULL;
+ }
+
+ /* Check if the literal section is already cached. */
+ if (use_abs_literals)
+ pcached = &default_lit_sections.lit4_seg;
+ else
+ pcached = &default_lit_sections.lit_seg;
+
+ if (*pcached)
+ return *pcached;
+
+ text_name = default_lit_sections.lit_prefix;
+ if (! text_name || ! *text_name)
+ {
+ text_name = segment_name (current_section);
+ group_name = elf_group_name (current_section);
+ linkonce = (current_section->flags & SEC_LINK_ONCE) != 0;
+ }
+
+ base_name = use_abs_literals ? ".lit4" : ".literal";
+ if (group_name)
+ {
+ name = xmalloc (strlen (base_name) + strlen (group_name) + 2);
+ sprintf (name, "%s.%s", base_name, group_name);
}
+ else if (strncmp (text_name, ".gnu.linkonce.", linkonce_len) == 0)
+ {
+ suffix = strchr (text_name + linkonce_len, '.');
+
+ name = xmalloc (linkonce_len + strlen (base_name) + 1
+ + (suffix ? strlen (suffix) : 0));
+ strcpy (name, ".gnu.linkonce");
+ strcat (name, base_name);
+ if (suffix)
+ strcat (name, suffix);
+ linkonce = TRUE;
+ }
+ else
+ {
+ /* If the section name ends with ".text", then replace that suffix
+ instead of appending an additional suffix. */
+ size_t len = strlen (text_name);
+ if (len >= 5 && strcmp (text_name + len - 5, ".text") == 0)
+ len -= 5;
+
+ name = xmalloc (len + strlen (base_name) + 1);
+ strcpy (name, text_name);
+ strcpy (name + len, base_name);
+ }
+
+ /* Canonicalize section names to allow renaming literal sections.
+ The group name, if any, came from the current text section and
+ has already been canonicalized. */
+ name = tc_canonicalize_symbol_name (name);
- if (!seg)
+ seg = bfd_get_section_by_name_if (stdoutput, name, match_section_group,
+ (void *) group_name);
+ if (! seg)
{
- /* Create a new literal section. */
- seg = subseg_new (name, (subsegT) 0);
- if (head)
+ flagword flags;
+
+ seg = subseg_force_new (name, 0);
+
+ if (! use_abs_literals)
{
- /* Add the newly created literal segment to the specified list. */
+ /* Add the newly created literal segment to the list. */
seg_list *n = (seg_list *) xmalloc (sizeof (seg_list));
n->seg = seg;
- n->next = head->next;
- head->next = n;
+ n->next = literal_head->next;
+ literal_head->next = n;
}
- bfd_set_section_flags (stdoutput, seg, SEC_HAS_CONTENTS |
- SEC_READONLY | SEC_ALLOC | SEC_LOAD
- | (is_code ? SEC_CODE : SEC_DATA));
+
+ flags = (SEC_HAS_CONTENTS | SEC_READONLY | SEC_ALLOC | SEC_LOAD
+ | (linkonce ? (SEC_LINK_ONCE | SEC_LINK_DUPLICATES_DISCARD) : 0)
+ | (use_abs_literals ? SEC_DATA : SEC_CODE));
+
+ elf_group_name (seg) = group_name;
+
+ bfd_set_section_flags (stdoutput, seg, flags);
bfd_set_section_alignment (stdoutput, seg, 2);
}
- *pseg = seg;
+ *pcached = seg;
subseg_set (current_section, current_subsec);
+ return seg;
}
\f
(frag_predicate, frag_predicate, const char *, xt_section_type);
static void xtensa_create_xproperty_segments
(frag_flags_fn, const char *, xt_section_type);
-static segment_info_type *retrieve_segment_info (segT);
-static segT retrieve_xtensa_section (char *);
static bfd_boolean section_has_property (segT, frag_predicate);
static bfd_boolean section_has_xproperty (segT, frag_flags_fn);
static void add_xt_block_frags
- (segT, segT, xtensa_block_info **, frag_predicate, frag_predicate);
+ (segT, xtensa_block_info **, frag_predicate, frag_predicate);
static bfd_boolean xtensa_frag_flags_is_empty (const frag_flags *);
static void xtensa_frag_flags_init (frag_flags *);
static void get_frag_property_flags (const fragS *, frag_flags *);
static bfd_vma frag_flags_to_number (const frag_flags *);
-static void add_xt_prop_frags
- (segT, segT, xtensa_block_info **, frag_flags_fn);
+static void add_xt_prop_frags (segT, xtensa_block_info **, frag_flags_fn);
/* Set up property tables after relaxation. */
xtensa_post_relax_hook (void)
{
xtensa_move_seg_list_to_beginning (literal_head);
- xtensa_move_seg_list_to_beginning (init_literal_head);
- xtensa_move_seg_list_to_beginning (fini_literal_head);
xtensa_find_unmarked_state_frags ();
+ xtensa_mark_frags_for_org ();
+ xtensa_mark_difference_of_two_symbols ();
xtensa_create_property_segments (get_frag_is_literal,
NULL,
if (section_has_property (sec, property_function))
{
- char *property_section_name =
- xtensa_get_property_section_name (sec, section_name_base);
- segT insn_sec = retrieve_xtensa_section (property_section_name);
- segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec);
- xtensa_block_info **xt_blocks =
- &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+ segment_info_type *xt_seg_info;
+ xtensa_block_info **xt_blocks;
+ segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+
+ prop_sec->output_section = prop_sec;
+ subseg_set (prop_sec, 0);
+ xt_seg_info = seg_info (prop_sec);
+ xt_blocks = &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+
/* Walk over all of the frchains here and add new sections. */
- add_xt_block_frags (sec, insn_sec, xt_blocks, property_function,
+ add_xt_block_frags (sec, xt_blocks, property_function,
end_property_function);
}
}
if (block)
{
xtensa_block_info *cur_block;
- /* This is a section with some data. */
int num_recs = 0;
bfd_size_type rec_size;
rec_size = num_recs * 8;
bfd_set_section_size (stdoutput, sec, rec_size);
- /* In order to make this work with the assembler, we have to
- build some frags and then build the "fixups" for it. It
- would be easier to just set the contents then set the
- arlents. */
-
if (num_recs)
{
- /* Allocate a fragment and leak it. */
- fragS *fragP;
- bfd_size_type frag_size;
- fixS *fixes;
- frchainS *frchainP;
- int i;
char *frag_data;
+ int i;
- frag_size = sizeof (fragS) + rec_size;
- fragP = (fragS *) xmalloc (frag_size);
-
- memset (fragP, 0, frag_size);
- fragP->fr_address = 0;
- fragP->fr_next = NULL;
- fragP->fr_fix = rec_size;
- fragP->fr_var = 0;
- fragP->fr_type = rs_fill;
- /* The rest are zeros. */
-
- frchainP = seginfo->frchainP;
- frchainP->frch_root = fragP;
- frchainP->frch_last = fragP;
-
- fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs);
- memset (fixes, 0, sizeof (fixS) * num_recs);
-
- seginfo->fix_root = fixes;
- seginfo->fix_tail = &fixes[num_recs - 1];
+ subseg_set (sec, 0);
+ frag_data = frag_more (rec_size);
cur_block = block;
- frag_data = &fragP->fr_literal[0];
for (i = 0; i < num_recs; i++)
{
- fixS *fix = &fixes[i];
- assert (cur_block);
+ fixS *fix;
/* Write the fixup. */
- if (i != num_recs - 1)
- fix->fx_next = &fixes[i + 1];
- else
- fix->fx_next = NULL;
- fix->fx_size = 4;
- fix->fx_done = 0;
- fix->fx_frag = fragP;
- fix->fx_where = i * 8;
- fix->fx_addsy = section_symbol (cur_block->sec);
- fix->fx_offset = cur_block->offset;
- fix->fx_r_type = BFD_RELOC_32;
- fix->fx_file = "Internal Assembly";
+ assert (cur_block);
+ fix = fix_new (frag_now, i * 8, 4,
+ section_symbol (cur_block->sec),
+ cur_block->offset,
+ FALSE, BFD_RELOC_32);
+ fix->fx_file = "<internal>";
fix->fx_line = 0;
/* Write the length. */
- md_number_to_chars (&frag_data[4 + 8 * i],
+ md_number_to_chars (&frag_data[4 + i * 8],
cur_block->size, 4);
cur_block = cur_block->next;
}
+ frag_wane (frag_now);
+ frag_new (0);
+ frag_wane (frag_now);
}
}
}
if (section_has_xproperty (sec, flag_fn))
{
- char *property_section_name =
- xtensa_get_property_section_name (sec, section_name_base);
- segT insn_sec = retrieve_xtensa_section (property_section_name);
- segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec);
- xtensa_block_info **xt_blocks =
- &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+ segment_info_type *xt_seg_info;
+ xtensa_block_info **xt_blocks;
+ segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+
+ prop_sec->output_section = prop_sec;
+ subseg_set (prop_sec, 0);
+ xt_seg_info = seg_info (prop_sec);
+ xt_blocks = &xt_seg_info->tc_segment_info_data.blocks[sec_type];
+
/* Walk over all of the frchains here and add new sections. */
- add_xt_prop_frags (sec, insn_sec, xt_blocks, flag_fn);
+ add_xt_prop_frags (sec, xt_blocks, flag_fn);
}
}
if (block)
{
xtensa_block_info *cur_block;
- /* This is a section with some data. */
int num_recs = 0;
bfd_size_type rec_size;
rec_size = num_recs * (8 + 4);
bfd_set_section_size (stdoutput, sec, rec_size);
-
/* elf_section_data (sec)->this_hdr.sh_entsize = 12; */
- /* In order to make this work with the assembler, we have to build
- some frags then build the "fixups" for it. It would be easier to
- just set the contents then set the arlents. */
-
if (num_recs)
{
- /* Allocate a fragment and (unfortunately) leak it. */
- fragS *fragP;
- bfd_size_type frag_size;
- fixS *fixes;
- frchainS *frchainP;
- int i;
char *frag_data;
+ int i;
- frag_size = sizeof (fragS) + rec_size;
- fragP = (fragS *) xmalloc (frag_size);
-
- memset (fragP, 0, frag_size);
- fragP->fr_address = 0;
- fragP->fr_next = NULL;
- fragP->fr_fix = rec_size;
- fragP->fr_var = 0;
- fragP->fr_type = rs_fill;
- /* The rest are zeros. */
-
- frchainP = seginfo->frchainP;
- frchainP->frch_root = fragP;
- frchainP->frch_last = fragP;
-
- fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs);
- memset (fixes, 0, sizeof (fixS) * num_recs);
-
- seginfo->fix_root = fixes;
- seginfo->fix_tail = &fixes[num_recs - 1];
+ subseg_set (sec, 0);
+ frag_data = frag_more (rec_size);
cur_block = block;
- frag_data = &fragP->fr_literal[0];
for (i = 0; i < num_recs; i++)
{
- fixS *fix = &fixes[i];
- assert (cur_block);
+ fixS *fix;
/* Write the fixup. */
- if (i != num_recs - 1)
- fix->fx_next = &fixes[i + 1];
- else
- fix->fx_next = NULL;
- fix->fx_size = 4;
- fix->fx_done = 0;
- fix->fx_frag = fragP;
- fix->fx_where = i * (8 + 4);
- fix->fx_addsy = section_symbol (cur_block->sec);
- fix->fx_offset = cur_block->offset;
- fix->fx_r_type = BFD_RELOC_32;
- fix->fx_file = "Internal Assembly";
+ assert (cur_block);
+ fix = fix_new (frag_now, i * 12, 4,
+ section_symbol (cur_block->sec),
+ cur_block->offset,
+ FALSE, BFD_RELOC_32);
+ fix->fx_file = "<internal>";
fix->fx_line = 0;
/* Write the length. */
- md_number_to_chars (&frag_data[4 + (8+4) * i],
+ md_number_to_chars (&frag_data[4 + i * 12],
cur_block->size, 4);
- md_number_to_chars (&frag_data[8 + (8+4) * i],
+ md_number_to_chars (&frag_data[8 + i * 12],
frag_flags_to_number (&cur_block->flags),
4);
cur_block = cur_block->next;
}
+ frag_wane (frag_now);
+ frag_new (0);
+ frag_wane (frag_now);
}
}
}
}
-static segment_info_type *
-retrieve_segment_info (segT seg)
-{
- segment_info_type *seginfo;
- seginfo = (segment_info_type *) bfd_get_section_userdata (stdoutput, seg);
- if (!seginfo)
- {
- frchainS *frchainP;
-
- seginfo = (segment_info_type *) xmalloc (sizeof (*seginfo));
- memset ((void *) seginfo, 0, sizeof (*seginfo));
- seginfo->fix_root = NULL;
- seginfo->fix_tail = NULL;
- seginfo->bfd_section = seg;
- seginfo->sym = 0;
- /* We will not be dealing with these, only our special ones. */
- bfd_set_section_userdata (stdoutput, seg, (void *) seginfo);
-
- frchainP = (frchainS *) xmalloc (sizeof (frchainS));
- frchainP->frch_root = NULL;
- frchainP->frch_last = NULL;
- frchainP->frch_next = NULL;
- frchainP->frch_seg = seg;
- frchainP->frch_subseg = 0;
- frchainP->fix_root = NULL;
- frchainP->fix_tail = NULL;
- /* Do not init the objstack. */
- /* obstack_begin (&frchainP->frch_obstack, chunksize); */
- /* frchainP->frch_frag_now = fragP; */
- frchainP->frch_frag_now = NULL;
-
- seginfo->frchainP = frchainP;
- }
-
- return seginfo;
-}
-
-
-static segT
-retrieve_xtensa_section (char *sec_name)
-{
- bfd *abfd = stdoutput;
- flagword flags, out_flags, link_once_flags;
- segT s;
-
- flags = bfd_get_section_flags (abfd, now_seg);
- link_once_flags = (flags & SEC_LINK_ONCE);
- if (link_once_flags)
- link_once_flags |= (flags & SEC_LINK_DUPLICATES);
- out_flags = (SEC_RELOC | SEC_HAS_CONTENTS | SEC_READONLY | link_once_flags);
-
- s = bfd_make_section_old_way (abfd, sec_name);
- if (s == NULL)
- as_bad (_("could not create section %s"), sec_name);
- if (!bfd_set_section_flags (abfd, s, out_flags))
- as_bad (_("invalid flag combination on section %s"), sec_name);
-
- return s;
-}
-
-
static bfd_boolean
section_has_property (segT sec, frag_predicate property_function)
{
static void
add_xt_block_frags (segT sec,
- segT xt_block_sec,
xtensa_block_info **xt_block,
frag_predicate property_function,
frag_predicate end_property_function)
{
- segment_info_type *seg_info;
- segment_info_type *xt_seg_info;
bfd_vma seg_offset;
fragS *fragP;
- xt_seg_info = retrieve_segment_info (xt_block_sec);
- seg_info = retrieve_segment_info (sec);
-
/* Build it if needed. */
while (*xt_block != NULL)
xt_block = &(*xt_block)->next;
/* Walk through the frags. */
seg_offset = 0;
- if (seg_info->frchainP)
+ if (seg_info (sec)->frchainP)
{
- for (fragP = seg_info->frchainP->frch_root;
+ for (fragP = seg_info (sec)->frchainP->frch_root;
fragP;
fragP = fragP->fr_next)
{
xtensa_frag_flags_init (prop_flags);
if (fragP->tc_frag_data.is_literal)
prop_flags->is_literal = TRUE;
+ if (fragP->tc_frag_data.is_specific_opcode
+ || fragP->tc_frag_data.is_no_transform)
+ {
+ prop_flags->is_no_transform = TRUE;
+ if (xtensa_frag_flags_is_empty (prop_flags))
+ prop_flags->is_data = TRUE;
+ }
if (fragP->tc_frag_data.is_unreachable)
prop_flags->is_unreachable = TRUE;
else if (fragP->tc_frag_data.is_insn)
prop_flags->insn.is_loop_target = TRUE;
if (fragP->tc_frag_data.is_branch_target)
prop_flags->insn.is_branch_target = TRUE;
- if (fragP->tc_frag_data.is_specific_opcode
- || fragP->tc_frag_data.is_no_transform)
- prop_flags->insn.is_no_transform = TRUE;
if (fragP->tc_frag_data.is_no_density)
prop_flags->insn.is_no_density = TRUE;
if (fragP->tc_frag_data.use_absolute_literals)
if (prop_flags->insn.is_no_density)
num |= XTENSA_PROP_INSN_NO_DENSITY;
- if (prop_flags->insn.is_no_transform)
- num |= XTENSA_PROP_INSN_NO_TRANSFORM;
+ if (prop_flags->is_no_transform)
+ num |= XTENSA_PROP_NO_TRANSFORM;
if (prop_flags->insn.is_no_reorder)
num |= XTENSA_PROP_INSN_NO_REORDER;
if (prop_flags->insn.is_abslit)
if (prop_flags_1->insn.is_no_density !=
prop_flags_2->insn.is_no_density)
return FALSE;
- if (prop_flags_1->insn.is_no_transform !=
- prop_flags_2->insn.is_no_transform)
+ if (prop_flags_1->is_no_transform !=
+ prop_flags_2->is_no_transform)
return FALSE;
if (prop_flags_1->insn.is_no_reorder !=
prop_flags_2->insn.is_no_reorder)
static void
add_xt_prop_frags (segT sec,
- segT xt_block_sec,
xtensa_block_info **xt_block,
frag_flags_fn property_function)
{
- segment_info_type *seg_info;
- segment_info_type *xt_seg_info;
bfd_vma seg_offset;
fragS *fragP;
- xt_seg_info = retrieve_segment_info (xt_block_sec);
- seg_info = retrieve_segment_info (sec);
/* Build it if needed. */
while (*xt_block != NULL)
{
/* Walk through the frags. */
seg_offset = 0;
- if (seg_info->frchainP)
+ if (seg_info (sec)->frchainP)
{
- for (fragP = seg_info->frchainP->frch_root; fragP;
+ for (fragP = seg_info (sec)->frchainP->frch_root; fragP;
fragP = fragP->fr_next)
{
xtensa_block_info tmp_block;
TInsn *insn;
assert (!istack_full (stack));
insn = &stack->insn[rec];
- memset (insn, 0, sizeof (TInsn));
+ tinsn_init (insn);
stack->ninsn++;
return insn;
}
int rec = stack->ninsn - 1;
assert (!istack_empty (stack));
stack->ninsn--;
- memset (&stack->insn[rec], 0, sizeof (TInsn));
+ tinsn_init (&stack->insn[rec]);
}
\f
}
-/* Get the ``num''th token of the TInsn.
- It is illegal to call this if num > insn->ntoks. */
-
-expressionS *
-tinsn_get_tok (TInsn *insn, int num)
-{
- assert (num < insn->ntok);
- return &insn->tok[num];
-}
-
-
/* Return TRUE if ANY of the operands in the insn are symbolic. */
static bfd_boolean
projects / deliverable / binutils-gdb.git / blobdiff