--enable-static=PKGS build static libraries default=yes
--enable-fast-install=PKGS optimize for fast installation default=yes
--disable-libtool-lock avoid locking (might break parallel builds)
- --enable-bfd-assembler use BFD back end for writing object files
targets alternative target configurations besides the primary
--enable-commonbfdlib build shared BFD/opcodes/libiberty library
--enable-werror treat compile warnings as errors
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 3815 "configure"' > conftest.$ac_ext
+ echo '#line 3814 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
-user_bfd_gas=
-# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
-if test "${enable_bfd_assembler+set}" = set; then
- enableval="$enable_bfd_assembler"
- case "${enableval}" in
- yes) need_bfd=yes user_bfd_gas=yes ;;
- no) user_bfd_gas=no ;;
- *) { { echo "$as_me:$LINENO: error: bad value ${enableval} given for bfd-assembler option" >&5
-echo "$as_me: error: bad value ${enableval} given for bfd-assembler option" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-fi; # Check whether --enable-targets or --disable-targets was given.
+# Check whether --enable-targets or --disable-targets was given.
if test "${enable_targets+set}" = set; then
enableval="$enable_targets"
case "${enableval}" in
using_cgen=no
-WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
# Check whether --enable-werror or --disable-werror was given.
if test "${enable_werror+set}" = set; then
NO_WERROR=
if test "${ERROR_ON_WARNING}" = yes ; then
- WARN_CFLAGS="$WARN_CFLAGS -Werror"
+ GCC_WARN_CFLAGS="$GCC_WARN_CFLAGS -Werror"
NO_WERROR="-Wno-error"
fi
+if test "${GCC}" = yes ; then
+ WARN_CFLAGS="${GCC_WARN_CFLAGS}"
+fi
+
# Check whether --enable-build-warnings or --disable-build-warnings was given.
if test "${enable_build_warnings+set}" = set; then
enableval="$enable_build_warnings"
case "${enableval}" in
- yes) ;;
- no) WARN_CFLAGS="-w";;
+ yes) WARN_CFLAGS="${GCC_WARN_CFLAGS}";;
+ no) if test "${GCC}" = yes ; then
+ WARN_CFLAGS="-w"
+ fi;;
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- WARN_CFLAGS="${WARN_CFLAGS} ${t}";;
+ WARN_CFLAGS="${GCC_WARN_CFLAGS} ${t}";;
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- WARN_CFLAGS="${t} ${WARN_CFLAGS}";;
+ WARN_CFLAGS="${t} ${GCC_WARN_CFLAGS}";;
*) WARN_CFLAGS=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
fi;
*opcodes*) shared_opcodes=true ;;
*) shared_opcodes=false ;;
esac
- if test "${shared_opcodes}" = "true"; then
- # A shared libopcodes must be linked against libbfd.
- need_bfd=yes
- fi
;;
esac
# Any other special object files needed ?
case ${cpu_type} in
+
+ bfin)
+ echo ${extra_objects} | grep -s "bfin-parse.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects bfin-parse.o"
+ fi
+
+ echo ${extra_objects} | grep -s "bfin-lex.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects bfin-lex.o"
+ fi
+ ;;
+
fr30 | ip2k | iq2000 | m32r | openrisc)
using_cgen=yes
;;
+ m32c)
+ using_cgen=yes
+ ;;
frv)
using_cgen=yes
;;
fi
;;
+ mt)
+ using_cgen=yes
+ ;;
+
i386 | s390 | sparc)
if test $this_target = $target ; then
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
- primary_bfd_gas=$bfd_gas
obj_format=$fmt
te_file=$em
-
- if test $bfd_gas = no ; then
- # Can't support other configurations this way.
- break
- fi
- elif test $bfd_gas = no ; then
- # Can't support this configuration.
- break
fi
# From target name and format, produce a list of supported emulations.
cgen_cpu_prefix=""
if test $using_cgen = yes ; then
case ${target_cpu} in
+ mt) cgen_cpu_prefix=ms1 ;;
*) cgen_cpu_prefix=${target_cpu} ;;
esac
{ (exit 1); exit 1; }; }
fi
-case ${user_bfd_gas}-${primary_bfd_gas} in
- yes-yes | no-no)
- # We didn't override user's choice.
- ;;
- no-yes)
- { echo "$as_me:$LINENO: WARNING: Use of BFD is required for ${target}; overriding config options." >&5
-echo "$as_me: WARNING: Use of BFD is required for ${target}; overriding config options." >&2;}
- ;;
- no-preferred)
- primary_bfd_gas=no
- ;;
- *-preferred)
- primary_bfd_gas=yes
- ;;
- yes-*)
- primary_bfd_gas=yes
- ;;
- -*)
- # User specified nothing.
- ;;
-esac
-
# Some COFF configurations want these random other flags set.
case ${obj_format} in
coff)
esac
# Getting this done right is going to be a bitch. Each configuration specified
-# with --enable-targets=... should be checked for environment, format, cpu, and
-# bfd_gas setting.
+# with --enable-targets=... should be checked for environment, format, cpu
+# setting.
#
# For each configuration, the necessary object file support code must be linked
# in. This might be only one, it might be up to four. The necessary emulation
#define OBJ_MAYBE_GENERIC 1
_ACEOF
;;
- hp300)
-cat >>confdefs.h <<\_ACEOF
-#define OBJ_MAYBE_HP300 1
-_ACEOF
- ;;
ieee)
cat >>confdefs.h <<\_ACEOF
#define OBJ_MAYBE_IEEE 1
_ACEOF
-case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
- yes-*-coff) need_bfd=yes ;;
- no-*-coff) need_bfd=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define MANY_SEGMENTS 1
-_ACEOF
- ;;
-esac
-
reject_dev_configs=yes
case ${reject_dev_configs}-${dev} in
-case "${primary_bfd_gas}" in
- yes)
-cat >>confdefs.h <<\_ACEOF
-#define BFD_ASSEMBLER 1
-_ACEOF
-
- need_bfd=yes ;;
-esac
-
# do we need the opcodes library?
case "${need_opcodes}" in
yes)
;;
esac
-case "${need_bfd}" in
-yes)
- BFDLIB=../bfd/libbfd.la
- BFDVER_H=../bfd/bfdver.h
- ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
- ;;
-esac
+BFDLIB=../bfd/libbfd.la
+BFDVER_H=../bfd/bfdver.h
+ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
projects / deliverable / binutils-gdb.git / blobdiff