#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.12.2
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ --enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
- --enable-shared build shared libraries [default=yes]"
+ --enable-static[=PKGS] build static libraries [default=yes]"
ac_help="$ac_help
- --enable-static build static libraries [default=yes]"
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--enable-bfd-assembler use BFD back end for writing object files"
ac_help="$ac_help
targets alternative target configurations besides the primary"
ac_help="$ac_help
--enable-commonbfdlib build shared BFD/opcodes/libiberty library"
+ac_help="$ac_help
+ --disable-nls do not use Native Language Support"
+ac_help="$ac_help
+ --with-included-gettext use the GNU gettext library included here"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.12.2"
exit 0 ;;
-with-* | --with-*)
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
# Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:585: checking host system type" >&5
+echo "configure:592: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
- if host_alias=`$ac_config_guess`; then :
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
-host=`$ac_config_sub $host_alias`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:606: checking target system type" >&5
+echo "configure:613: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac ;;
esac
-target=`$ac_config_sub $target_alias`
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:624: checking build system type" >&5
+echo "configure:631: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac ;;
esac
-build=`$ac_config_sub $build_alias`
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:658: checking for a BSD compatible install" >&5
+echo "configure:666: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-PACKAGE=gas
-
-VERSION=2.8.2
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:727: checking whether build environment is sane" >&5
+echo "configure:720: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "" = "X"; then
+ if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
test "$2" = conftestfile
)
then
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:777: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=gas
+
+VERSION=2.9.4
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:774: checking for working aclocal" >&5
+echo "configure:823: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:787: checking for working autoconf" >&5
+echo "configure:836: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:800: checking for working automake" >&5
+echo "configure:849: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:813: checking for working autoheader" >&5
+echo "configure:862: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:826: checking for working makeinfo" >&5
+echo "configure:875: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
echo "$ac_t""missing" 1>&6
fi
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:839: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:938: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftestmake <<\EOF
-all:
- @echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- eval ac_cv_prog_make_${ac_make}_set=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
-rm -f conftestmake
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SET_MAKE=
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
- SET_MAKE="MAKE=${MAKE-make}"
fi
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:869: checking for $ac_word" >&5
+echo "configure:967: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:898: checking for $ac_word" >&5
+echo "configure:996: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
echo "$ac_t""no" 1>&6
fi
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1046: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:946: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1077: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 956 "configure"
+#line 1087 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1091: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:980: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1111: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:985: checking whether we are using GNU C" >&5
+echo "configure:1116: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:994: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1125: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1009: checking whether ${CC-cc} accepts -g" >&5
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1144: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
- CFLAGS="-O2"
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1039: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
# Check whether --with-gnu-ld or --without-gnu-ld was given.
with_gnu_ld=no
fi
-if test "$with_gnu_ld" = yes; then
+
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1188: checking for ld used by GCC" >&5
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+ /* | [A-Za-z]:\\*)
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1075: checking for GNU ld" >&5
+echo "configure:1206: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1078: checking for non-GNU ld" >&5
+echo "configure:1209: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- case "$LD" in
- /*)
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
- ;;
- *)
+ if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/ld"; then
- ac_cv_path_LD="$ac_dir/ld"
+ if test -f "$ac_dir/$ac_prog"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
- test "$with_gnu_ld" = yes && break
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
- ;;
-esac
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
fi
LD="$ac_cv_path_LD"
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking whether we are using GNU ld""... $ac_c" 1>&6
-echo "configure:1117: checking whether we are using GNU ld" >&5
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1245: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1261: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ else
+ ac_cv_path_NM="$ac_dir/nm"
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi
+fi
+
+NM="$ac_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1133: checking whether ln -s works" >&5
+echo "configure:1296: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
-
-
-
-
-
-# Always use our own libtool.
-LIBTOOL='$(top_builddir)/libtool'
-
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- if test "$enableval" = no; then
- enable_shared=no
-else
- enable_shared=yes
-fi
-fi
-
-libtool_shared=
-test "$enable_shared" = no && libtool_shared=" --disable-shared"
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- if test "$enableval" = no; then
- enable_static=no
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
else
- enable_static=yes
-fi
+ ac_tool_prefix=
fi
-libtool_static=
-test "$enable_static" = no && libtool_static=" --disable-static"
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-libtool_flags="$libtool_shared$libtool_static"
+# Check for any special flags to pass to ltconfig.
+libtool_flags=
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# libtool support.
case "$host" in
*-*-irix6*)
- ac_save_CFLAGS="$CFLAGS"
- # -n32 always needs to be added to the linker when using GCC.
- test "$ac_cv_prog_gcc" = yes && CFLAGS="$CFLAGS -n32"
- for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
- if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
- LD="${LD-ld} $f"
- fi
- done
- CFLAGS="$ac_save_CFLAGS"
- ;;
-
-*-*-sco3.2v5*)
+ # Find out which ABI we are using.
+ echo '#line 1338 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1339: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
CFLAGS="$CFLAGS -belf"
;;
+
+*-*-cygwin32*)
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1364: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_DLLTOOL"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1395: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ DLLTOOL="false"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1429: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_AS"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1460: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ AS="false"
+fi
+fi
+
+
+ ;;
+
esac
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
+LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
user_bfd_gas=
# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
te_file=generic
+# Makefile target for installing gas in $(tooldir)/bin.
+install_tooldir=install-exec-tooldir
+
canon_targets=""
if test -n "$enable_targets" ; then
for t in `echo $enable_targets | sed 's/,/ /g'`; do
eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
# check for architecture variants
+ arch=
endian=
case ${cpu} in
+ alpha*) cpu_type=alpha ;;
armeb) cpu_type=arm endian=big ;;
arm*) cpu_type=arm endian=little ;;
thumb*) cpu_type=arm endian=little ;;
m680[012346]0) cpu_type=m68k ;;
m68008) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
+ m5200) cpu_type=m68k ;;
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little ;;
+# start-sanitize-r5900
mips*5900*) cpu_type=mips endian=little ;;
+# end-sanitize-r5900
mips*) cpu_type=mips endian=big ;;
powerpcle*) cpu_type=ppc endian=little ;;
powerpc*) cpu_type=ppc endian=big ;;
rs6000*) cpu_type=ppc ;;
- sparc64) cpu_type=sparc want_sparc_v9=true ;;
- sparc*) cpu_type=sparc ;;
+ sparclite*) cpu_type=sparc arch=sparclite ;;
+ sparclet*) cpu_type=sparc arch=sparclet ;;
+ sparc64*) cpu_type=sparc arch=v9-64 ;;
+ sparc86x*) cpu_type=sparc arch=sparc86x ;;
+ sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
+ v850*) cpu_type=v850 ;;
*) cpu_type=${cpu} ;;
esac
a29k-nyu-sym1) fmt=coff ;;
a29k-*-vxworks*) fmt=coff ;;
- alpha-*-*vms*) fmt=evax ;;
- alpha-*-netware*) fmt=ecoff ;;
- alpha-*-openbsd*) fmt=ecoff ;;
- alpha-*-osf*) fmt=ecoff ;;
- alpha-*-linuxecoff*) fmt=ecoff ;;
- alpha-*-linux*) fmt=elf em=linux ;;
+ alpha*-*-*vms*) fmt=evax ;;
+ alpha*-*-netware*) fmt=ecoff ;;
+ alpha*-*-openbsd*) fmt=ecoff ;;
+ alpha*-*-osf*) fmt=ecoff ;;
+ alpha*-*-linuxecoff*) fmt=ecoff ;;
+ alpha*-*-linux-gnu*) fmt=elf em=linux ;;
+ alpha*-*-netbsd*) fmt=elf em=nbsd ;;
arc-*-elf*) fmt=elf bfd_gas=yes ;;
arm-*-riscix*) fmt=aout em=riscix ;;
arm-*-aout) fmt=aout ;;
arm-*-coff | thumb-*-coff) fmt=coff ;;
+ arm-*-elf | thumb-*-elf) fmt=elf ;;
arm-*-riscix*) fmt=aout ;;
- arm-*-pe) fmt=coff em=pe ;;
+ arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
d10v-*-*) fmt=elf bfd_gas=yes ;;
-# start-sanitize-d30v
d30v-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-d30v
+
+# start-sanitize-sky
+ dvp-*-*) fmt=elf bfd_gas=yes install_tooldir= ;;
+# end-sanitize-sky
hppa-*-*elf*) fmt=elf em=hppa ;;
hppa-*-lites*) fmt=elf em=hppa ;;
i386-ibm-aix*) fmt=coff em=i386aix ;;
i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
+ i386-*-beospe*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-beoself* | i386-*-beos*) fmt=elf bfd_gas=yes ;;
i386-*-bsd*) fmt=aout em=386bsd ;;
i386-*-netbsd0.8) fmt=aout em=386bsd ;;
i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux*) fmt=elf em=linux ;;
+ i386-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
i386-*-lynxos*) fmt=coff em=lynx ;;
- i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
- fmt=elf ;;
- i386-*-sco*elf*) fmt=elf
+ i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
+ fmt=elf bfd_gas=yes ;;
+ i386-*-freebsdelf*) fmt=elf bfd_gas=yes ;;
+ i386-*-freebsd*) fmt=aout em=386bsd ;;
+ i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*)
+ fmt=coff ;;
+ i386-*-sco3.2v5*) fmt=elf
if test ${this_target} = $target; then
cat >> confdefs.h <<\EOF
#define SCO_ELF 1
fi
;;
- i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
- fmt=coff ;;
+ i386-*-sco3.2*) fmt=coff ;;
i386-*-vsta) fmt=aout ;;
- i386-*-msdosdjgpp* | i386-*-go32*)
+ i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*)
fmt=coff em=go32;;
i386-*-rtems*) fmt=coff ;;
i386-*-gnu*) fmt=elf ;;
i386-*-msdos*) fmt=aout ;;
i386-*-moss*) fmt=elf ;;
i386-*-pe) fmt=coff em=pe ;;
- i386-*-cygwin32) fmt=coff em=pe bfd_gas=yes ;;
- i386-*-*nt) fmt=coff em=pe ;;
+ i386-*-cygwin32*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-*nt*) fmt=coff em=pe ;;
i960-*-bout) fmt=bout ;;
i960-*-coff) fmt=coff em=ic960 ;;
i960-*-rtems*) fmt=coff em=ic960 ;;
fmt=coff ;;
m68k-*-hpux*) fmt=hp300 em=hp300 ;;
m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux*) fmt=elf em=linux ;;
+ m68k-*-linux-gnu*) fmt=elf em=linux ;;
m68k-*-lynxos*) fmt=coff em=lynx ;;
m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
mips-*-lnews*) fmt=ecoff em=lnews ;;
mips-*-riscos*) fmt=ecoff ;;
mips-*-sysv*) fmt=ecoff ;;
- mips-*-elf* | mips-*-rtems* | mips-*-linux* | mips-*-gnu* | mips-*-openbsd*)
+ mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*)
fmt=elf ;;
mn10200-*-*) fmt=elf bfd_gas=yes ;;
mn10300-*-*) fmt=elf bfd_gas=yes ;;
ppc-*-beos*) fmt=coff ;;
ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
fmt=elf ;;
- ppc-*-linux*) fmt=elf
+ ppc-*-linux-gnu*) fmt=elf
case "$endian" in
big) ;;
- *) { echo "configure: error: Linux must be configured big endian" 1>&2; exit 1; } ;;
+ *) { echo "configure: error: GNU/Linux must be configured big endian" 1>&2; exit 1; } ;;
esac
;;
ppc-*-solaris*) fmt=elf
sh-*-elf*) fmt=elf ;;
sh-*-coff*) fmt=coff ;;
+ sh-*-rtems*) fmt=coff ;;
ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
fmt=aout em=sparcaout ;;
sparc-*-coff) fmt=coff ;;
sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux*) fmt=elf em=linux ;;
+ sparc-*-linux-gnu*) fmt=elf em=linux ;;
sparc-*-lynxos*) fmt=coff em=lynx ;;
sparc-fujitsu-none) fmt=aout ;;
sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
fmt=elf ;;
- sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- sparc-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ sparc-*-netbsd*) fmt=aout em=nbsd ;;
+ sparc-*-openbsd*) fmt=aout em=nbsd ;;
+ tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
+ tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
# start-sanitize-tic80
tic80-*-*) fmt=coff ;;
# end-sanitize-tic80
+
v850-*-*) fmt=elf bfd_gas=yes ;;
# start-sanitize-v850e
v850e-*-*) fmt=elf bfd_gas=yes ;;
+ v850ea-*-*) fmt=elf bfd_gas=yes ;;
# end-sanitize-v850e
-# start-sanitize-v850eq
- v850eq-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-v850eq
vax-*-bsd* | vax-*-ultrix*)
fmt=aout ;;
vax-*-vms) fmt=vms ;;
esac
case ${cpu_type}-${fmt} in
- alpha-*) bfd_gas=yes ;;
+ alpha*-*) bfd_gas=yes ;;
arm-*) bfd_gas=yes ;;
# not yet
# i386-aout) bfd_gas=preferred ;;
# do we need the opcodes library?
case ${cpu_type} in
- vax | i386)
+ vax | i386 | tic30)
;;
*)
need_opcodes=yes
+
+ case "${enable_shared}" in
+ yes) shared_opcodes=true ;;
+ *opcodes*) shared_opcodes=true ;;
+ *) shared_opcodes=false ;;
+ esac
if test "${shared_opcodes}" = "true"; then
# A shared libopcodes must be linked against libbfd.
need_bfd=yes
;;
esac
- test -n "$want_sparc_v9" && cat >> confdefs.h <<\EOF
-#define SPARC_V9 1
-EOF
-
-
- case ${cpu}-${vendor}-${os} in
- sparc64-*-elf*) cat >> confdefs.h <<\EOF
-#define SPARC_ARCH64 1
-EOF
- ;;
- esac
-
case ${cpu_type} in
m32r)
- case ${extra_objects} in
+ case "x${extra_objects}" in
*cgen.o*) ;;
*) extra_objects="$extra_objects cgen.o"
cat >> confdefs.h <<\EOF
fi
;;
+ sparc)
+ if test $this_target = $target ; then
+ cat >> confdefs.h <<EOF
+#define DEFAULT_ARCH "${arch}"
+EOF
+
+ fi
+ ;;
+
*)
;;
esac
case ${generic_target}-${fmt} in
mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- mips-*-linux*-*) case "$endian" in
+ mips-*-linux-gnu*-*) case "$endian" in
big) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
*) emulation="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
esac ;;
"") { echo "configure: error: GAS does not know what format to use for target ${target}" 1>&2; exit 1; } ;;
esac
+# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU).
+cgen_cpu_prefix=""
+case "x${extra_objects}" in
+ *cgen.o*)
+ case ${target_cpu} in
+ *) cgen_cpu_prefix=${target_cpu} ;;
+ esac
+ ;;
+esac
+
+
if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
{ echo "configure: error: GAS does not support target CPU ${target_cpu_type}" 1>&2; exit 1; }
+
case "${primary_bfd_gas}" in
yes) cat >> confdefs.h <<\EOF
#define BFD_ASSEMBLER 1
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1945: checking for $ac_word" >&5
+echo "configure:2270: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1974: checking for $ac_word" >&5
+echo "configure:2299: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
echo "$ac_t""no" 1>&6
fi
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2349: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2022: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2380: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2032 "configure"
+#line 2390 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2056: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2414: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2061: checking whether we are using GNU C" >&5
+echo "configure:2419: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2070: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2428: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2085: checking whether ${CC-cc} accepts -g" >&5
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:2447: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
- CFLAGS="-O2"
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2123: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
+ CFLAGS=
fi
fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
for ac_prog in 'bison -y' byacc
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2178: checking for $ac_word" >&5
+echo "configure:2484: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$YACC"; then
ac_cv_prog_YACC="$YACC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
IFS="$ac_save_ifs"
fi
fi
-YACC="$ac_cv_prog_YACC"
-if test -n "$YACC"; then
- echo "$ac_t""$YACC" 1>&6
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:2514: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 2529 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2535: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 2546 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2552: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 2563 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2569: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+missing_dir=`cd $ac_aux_dir && pwd`
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2599: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX=""$missing_dir/missing flex""
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2631: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$LEXLIB"
+then
+ case "$LEX" in
+ flex*) ac_lib=fl ;;
+ *) ac_lib=l ;;
+ esac
+ echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:2664: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2672 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap();
+
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:2683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LEXLIB="-l$ac_lib"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+echo $ac_n "checking lex output file root""... $ac_c" 1>&6
+echo "configure:2706: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # The minimal lex program is just a single line: %%. But some broken lexes
+# (Solaris, I think it was) want two %% lines, so accommodate them.
+echo '%%
+%%' | $LEX
+if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+else
+ { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
+echo "configure:2727: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+ac_save_LIBS="$LIBS"
+LIBS="$LIBS $LEXLIB"
+cat > conftest.$ac_ext <<EOF
+#line 2739 "configure"
+#include "confdefs.h"
+`cat $LEX_OUTPUT_ROOT.c`
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_prog_lex_yytext_pointer=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+rm -f "${LEX_OUTPUT_ROOT}.c"
+
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+ cat >> confdefs.h <<\EOF
+#define YYTEXT_POINTER 1
+EOF
+
+fi
+
+
+ALL_LINGUAS=
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:2770: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+ grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+ echo "$ac_t""yes" 1>&6
+ ISC=yes # If later tests want to check for ISC.
+ cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+ if test "$GCC" = yes; then
+ CC="$CC -posix"
+ else
+ CC="$CC -Xp"
+ fi
+else
+ echo "$ac_t""no" 1>&6
+ ISC=
+fi
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:2791: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2796 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2804: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ ac_cv_header_stdc=yes
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2821 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2839 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2860 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:2871: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:2895: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2900 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:2949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_const=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:2970: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 2977 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:2984: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for off_t""... $ac_c" 1>&6
+echo "configure:3010: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3015 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_off_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_off_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+ cat >> confdefs.h <<\EOF
+#define off_t long
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:3043: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3048 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_size_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments. Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:3078: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3083 "configure"
+#include "confdefs.h"
+#include <alloca.h>
+int main() {
+char *p = alloca(2 * sizeof(int));
+; return 0; }
+EOF
+if { (eval echo configure:3090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_header_alloca_h=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_alloca_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
+
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:3111: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3116 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if HAVE_ALLOCA_H
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
+#endif
+
+int main() {
+char *p = (char *) alloca(1);
+; return 0; }
+EOF
+if { (eval echo configure:3144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_func_alloca_works=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_func_alloca_works=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
+fi
+
+if test $ac_cv_func_alloca_works = no; then
+ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+ # that cause trouble. Some versions do not even contain alloca or
+ # contain a buggy version. If you still want to use their alloca,
+ # use ar to extract alloca.o from them instead of compiling alloca.c.
+ ALLOCA=alloca.${ac_objext}
+ cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:3176: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3181 "configure"
+#include "confdefs.h"
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "webecray" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_os_cray=yes
+else
+ rm -rf conftest*
+ ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3206: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3211 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+ break
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:3261: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_stack_direction=0
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3269 "configure"
+#include "confdefs.h"
+find_stack_direction ()
+{
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+ exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:3288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_stack_direction=1
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3313: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3318 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3352: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3357 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3380: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:3405: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_mmap_fixed_mapped=no
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3413 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+ Here is a matrix of mmap possibilities:
+ mmap private not fixed
+ mmap private fixed at somewhere currently unmapped
+ mmap private fixed at somewhere already mapped
+ mmap shared not fixed
+ mmap shared fixed at somewhere currently unmapped
+ mmap shared fixed at somewhere already mapped
+ For private mappings, we should verify that changes cannot be read()
+ back from the file, nor mmap's back from the file at a different
+ address. (There have been systems where private was not correctly
+ implemented like the infamous i386 svr4.0, and systems where the
+ VM page cache was not coherent with the filesystem buffer cache
+ like early versions of FreeBSD and possibly contemporary NetBSD.)
+ For shared mappings, we should conversely verify that changes get
+ propogated back to all the places they're supposed to be.
+
+ Grep wants private fixed already mapped.
+ The main things grep needs to know about mmap are:
+ * does it exist and is it safe to write into the mmap'd area
+ * how to use it (BSD variants) */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+/* This mess was copied from the GNU getpagesize.h. */
+#ifndef HAVE_GETPAGESIZE
+# ifdef HAVE_UNISTD_H
+# include <unistd.h>
+# endif
+
+/* Assume that all systems that can run configure have sys/param.h. */
+# ifndef HAVE_SYS_PARAM_H
+# define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+# define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+# ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+# ifdef EXEC_PAGESIZE
+# define getpagesize() EXEC_PAGESIZE
+# else /* no EXEC_PAGESIZE */
+# ifdef NBPG
+# define getpagesize() NBPG * CLSIZE
+# ifndef CLSIZE
+# define CLSIZE 1
+# endif /* no CLSIZE */
+# else /* no NBPG */
+# ifdef NBPC
+# define getpagesize() NBPC
+# else /* no NBPC */
+# ifdef PAGESIZE
+# define getpagesize() PAGESIZE
+# endif /* PAGESIZE */
+# endif /* no NBPC */
+# endif /* no NBPG */
+# endif /* no EXEC_PAGESIZE */
+# else /* no HAVE_SYS_PARAM_H */
+# define getpagesize() 8192 /* punt totally */
+# endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+ char *data, *data2, *data3;
+ int i, pagesize;
+ int fd;
+
+ pagesize = getpagesize();
+
+ /*
+ * First, make a file with some known garbage in it.
+ */
+ data = malloc(pagesize);
+ if (!data)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ *(data + i) = rand();
+ umask(0);
+ fd = creat("conftestmmap", 0600);
+ if (fd < 0)
+ exit(1);
+ if (write(fd, data, pagesize) != pagesize)
+ exit(1);
+ close(fd);
+
+ /*
+ * Next, try to mmap the file at a fixed address which
+ * already has something else allocated at it. If we can,
+ * also make sure that we see the same garbage.
+ */
+ fd = open("conftestmmap", O_RDWR);
+ if (fd < 0)
+ exit(1);
+ data2 = malloc(2 * pagesize);
+ if (!data2)
+ exit(1);
+ data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+ if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_FIXED, fd, 0L))
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data2 + i))
+ exit(1);
+
+ /*
+ * Finally, make sure that changes to the mapped area
+ * do not percolate back to the file as seen by read().
+ * (This is a bug on some variants of i386 svr4.0.)
+ */
+ for (i = 0; i < pagesize; ++i)
+ *(data2 + i) = *(data2 + i) + 1;
+ data3 = malloc(pagesize);
+ if (!data3)
+ exit(1);
+ if (read(fd, data3, pagesize) != pagesize)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data3 + i))
+ exit(1);
+ close(fd);
+ unlink("conftestmmap");
+ exit(0);
+}
+
+EOF
+if { (eval echo configure:3553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_func_mmap_fixed_mapped=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
+fi
+
+
+ for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3581: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3586 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3591: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3621: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3626 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+ if test "${ac_cv_func_stpcpy+set}" != "set"; then
+ for ac_func in stpcpy
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3678: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3683 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ fi
+ if test "${ac_cv_func_stpcpy}" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_STPCPY 1
+EOF
+
+ fi
+
+ if test $ac_cv_header_locale_h = yes; then
+ echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
+echo "configure:3740: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3745 "configure"
+#include "confdefs.h"
+#include <locale.h>
+int main() {
+return LC_MESSAGES
+; return 0; }
+EOF
+if { (eval echo configure:3752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_val_LC_MESSAGES=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_val_LC_MESSAGES=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LC_MESSAGES 1
+EOF
+
+ fi
+ fi
+ echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
+echo "configure:3773: checking whether NLS is requested" >&5
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi
+
+ echo "$ac_t""$USE_NLS" 1>&6
+
+
+ USE_INCLUDED_LIBINTL=no
+
+ if test "$USE_NLS" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_NLS 1
+EOF
+
+ echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
+echo "configure:3793: checking whether included gettext is requested" >&5
+ # Check whether --with-included-gettext or --without-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then
+ withval="$with_included_gettext"
+ nls_cv_force_use_gnu_gettext=$withval
+else
+ nls_cv_force_use_gnu_gettext=no
+fi
+
+ echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+ CATOBJEXT=NONE
+
+ ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
+echo "configure:3812: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3817 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3822: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
+echo "configure:3839: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3844 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:3851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ gt_cv_func_gettext_libc=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gt_cv_func_gettext_libc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+
+ if test "$gt_cv_func_gettext_libc" != "yes"; then
+ echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
+echo "configure:3867: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lintl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3875 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char bindtextdomain();
+
+int main() {
+bindtextdomain()
+; return 0; }
+EOF
+if { (eval echo configure:3886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
+echo "configure:3902: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3907 "configure"
+#include "confdefs.h"
+
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:3914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ gt_cv_func_gettext_libintl=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gt_cv_func_gettext_libintl=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$gt_cv_func_gettext_libc" = "yes" \
+ || test "$gt_cv_func_gettext_libintl" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GETTEXT 1
+EOF
+
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3942: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ if test "$MSGFMT" != "no"; then
+ for ac_func in dcgettext
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3976: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3981 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4031: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GMSGFMT" in
+ /*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+ echo "$ac_t""$GMSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-test -n "$YACC" && break
-done
-test -n "$YACC" || YACC="yacc"
-
-# Extract the first word of "flex", so it can be a program name with args.
-set dummy flex; ac_word=$2
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2210: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+echo "configure:4066: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
-else
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LEX="flex"
- break
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
-fi
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
fi
-LEX="$ac_cv_prog_LEX"
-if test -n "$LEX"; then
- echo "$ac_t""$LEX" 1>&6
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+ echo "$ac_t""$XGETTEXT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test -z "$LEXLIB"
-then
- case "$LEX" in
- flex*) ac_lib=fl ;;
- *) ac_lib=l ;;
- esac
- echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2243: checking for yywrap in -l$ac_lib" >&5
-ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-l$ac_lib $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2251 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 4098 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char yywrap();
int main() {
-yywrap()
+extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:2262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ CATOBJEXT=.gmo
+ DATADIRNAME=share
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ CATOBJEXT=.mo
+ DATADIRNAME=lib
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LEXLIB="-l$ac_lib"
+ INSTOBJEXT=.mo
+ fi
+ fi
+
else
echo "$ac_t""no" 1>&6
fi
-fi
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2285: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+
+ if test "$CATOBJEXT" = "NONE"; then
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ INTLOBJS="\$(GETTOBJS)"
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4138: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 2300 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2306: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 2317 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+ ;;
+esac
fi
-rm -f conftest*
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4172: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GMSGFMT" in
+ /*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
fi
- CPP="$ac_cv_prog_CPP"
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+ echo "$ac_t""$GMSGFMT" 1>&6
else
- ac_cv_prog_CPP="$CPP"
+ echo "$ac_t""no" 1>&6
fi
-echo "$ac_t""$CPP" 1>&6
-echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2346: checking lex output file root" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4207: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # The minimal lex program is just a single line: %%. But some broken lexes
-# (Solaris, I think it was) want two %% lines, so accommodate them.
-echo '%%
-%%' | $LEX
-if test -f lex.yy.c; then
- ac_cv_prog_lex_root=lex.yy
-elif test -f lexyy.c; then
- ac_cv_prog_lex_root=lexyy
-else
- { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+ echo "$ac_t""$XGETTEXT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
-LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.gmo
+ INSTOBJEXT=.mo
+ DATADIRNAME=share
+ INTLDEPS='$(top_builddir)/../intl/libintl.a'
+ INTLLIBS=$INTLDEPS
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
-echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2367: checking whether yytext is a pointer" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+ if test "$XGETTEXT" != ":"; then
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+ XGETTEXT=":"
+ fi
+ fi
+
+ # We need to process the po/ directory.
+ POSUB=po
+ else
+ DATADIRNAME=share
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ # If this is used in GNU gettext we have to set USE_NLS to `yes'
+ # because some of the sources are only built for this goal.
+ if test "$PACKAGE" = gettext; then
+ USE_NLS=yes
+ USE_INCLUDED_LIBINTL=yes
+ fi
+
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
+echo "configure:4297: checking for catalogs to be installed" >&5
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ echo "$ac_t""$LINGUAS" 1>&6
+ fi
+
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ if test $ac_cv_header_locale_h = yes; then
+ INCLUDE_LOCALE_H="#include <locale.h>"
+ else
+ INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>. Take care yourself. */"
+ fi
+
+
+ if test -f $srcdir/po2tbl.sed.in; then
+ if test "$CATOBJEXT" = ".cat"; then
+ ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
+echo "configure:4325: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # POSIX says lex can declare yytext either as a pointer or an array; the
-# default is implementation-dependent. Figure out which it is, since
-# not all implementations provide the %pointer and %array declarations.
-ac_cv_prog_lex_yytext_pointer=no
-echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
-ac_save_LIBS="$LIBS"
-LIBS="$LIBS $LEXLIB"
-cat > conftest.$ac_ext <<EOF
-#line 2379 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 4330 "configure"
#include "confdefs.h"
-`cat $LEX_OUTPUT_ROOT.c`
-int main() {
-
-; return 0; }
+#include <linux/version.h>
EOF
-if { (eval echo configure:2386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4335: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- ac_cv_prog_lex_yytext_pointer=yes
+ eval "ac_cv_header_$ac_safe=yes"
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-rm -f "${LEX_OUTPUT_ROOT}.c"
-
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ msgformat=linux
+else
+ echo "$ac_t""no" 1>&6
+msgformat=xopen
fi
-echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
-if test $ac_cv_prog_lex_yytext_pointer = yes; then
- cat >> confdefs.h <<\EOF
-#define YYTEXT_POINTER 1
-EOF
-fi
+ sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+ fi
+ sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+ $srcdir/po2tbl.sed.in > po2tbl.sed
+ fi
+ if test "$PACKAGE" = "gettext"; then
+ GT_NO="#NO#"
+ GT_YES=
+ else
+ GT_NO=
+ GT_YES="#YES#"
+ fi
+
+
+
+ MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+
+
+ l=
+
+
+ if test -d $srcdir/po; then
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
+ fi
+
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2409: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4398: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
-echo "configure:2427: checking for Cygwin32 environment" >&5
+echo "configure:4416: checking for Cygwin32 environment" >&5
if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2432 "configure"
+#line 4421 "configure"
#include "confdefs.h"
int main() {
-int main () { return __CYGWIN32__; }
+return __CYGWIN32__;
; return 0; }
EOF
-if { (eval echo configure:2439: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_cygwin32=yes
else
echo "$ac_t""$am_cv_cygwin32" 1>&6
CYGWIN32=
test "$am_cv_cygwin32" = yes && CYGWIN32=yes
+echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
+echo "configure:4445: checking for Mingw32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4450 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:4457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ am_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_mingw32" 1>&6
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes
+
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2457: checking for executable suffix" >&5
+echo "configure:4476: checking for executable suffix" >&5
if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN32" = yes; then
+ if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
am_cv_exeext=.exe
else
cat > am_c_test.c << 'EOF'
}
EOF
${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=`echo am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+am_cv_exeext=
+for file in am_c_test.*; do
+ case $file in
+ *.c) ;;
+ *.o) ;;
+ *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+ esac
+done
rm -f am_c_test*
fi
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2485: checking for $ac_hdr" >&5
+echo "configure:4511: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2490 "configure"
+#line 4516 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2495: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:4521: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:2525: checking whether compiling a cross-assembler" >&5
+echo "configure:4551: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2540: checking for working alloca.h" >&5
+echo "configure:4566: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2545 "configure"
+#line 4571 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2573: checking for alloca" >&5
+echo "configure:4599: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2578 "configure"
+#line 4604 "configure"
#include "confdefs.h"
#ifdef __GNUC__
# define alloca __builtin_alloca
#else
-# if HAVE_ALLOCA_H
-# include <alloca.h>
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
# else
-# ifdef _AIX
- #pragma alloca
+# if HAVE_ALLOCA_H
+# include <alloca.h>
# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
+# endif
# endif
# endif
# endif
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
# that cause trouble. Some versions do not even contain alloca or
# contain a buggy version. If you still want to use their alloca,
# use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.o
+ ALLOCA=alloca.${ac_objext}
cat >> confdefs.h <<\EOF
#define C_ALLOCA 1
EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2633: checking whether alloca needs Cray hooks" >&5
+echo "configure:4664: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2638 "configure"
+#line 4669 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2663: checking for $ac_func" >&5
+echo "configure:4694: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2668 "configure"
+#line 4699 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4722: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2718: checking stack direction for C alloca" >&5
+echo "configure:4749: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2726 "configure"
+#line 4757 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4776: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2767: checking for inline" >&5
+echo "configure:4798: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2774 "configure"
+#line 4805 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2781: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4812: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2811: checking for $ac_func" >&5
+echo "configure:4842: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2816 "configure"
+#line 4847 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2868: checking for $ac_func" >&5
+echo "configure:4899: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2873 "configure"
+#line 4904 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:2925: checking for working assert macro" >&5
+echo "configure:4956: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2930 "configure"
+#line 4961 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:2946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:2987: checking whether declaration is required for strstr" >&5
+echo "configure:5018: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2992 "configure"
+#line 5023 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:3024: checking whether declaration is required for malloc" >&5
+echo "configure:5055: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3029 "configure"
+#line 5060 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:3061: checking whether declaration is required for free" >&5
+echo "configure:5092: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3066 "configure"
+#line 5097 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:3098: checking whether declaration is required for sbrk" >&5
+echo "configure:5129: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3103 "configure"
+#line 5134 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:3138: checking whether declaration is required for errno" >&5
+echo "configure:5169: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3143 "configure"
+#line 5174 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
; return 0; }
EOF
-if { (eval echo configure:3158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5189: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
+ case `(ac_space=' '; set) 2>&1 | grep ac_space` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
+s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
s%@RANLIB@%$RANLIB%g
+s%@CC@%$CC%g
s%@LD@%$LD%g
+s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
+s%@DLLTOOL@%$DLLTOOL%g
+s%@AS@%$AS%g
+s%@cgen_cpu_prefix@%$cgen_cpu_prefix%g
s%@extra_objects@%$extra_objects%g
s%@target_cpu_type@%$target_cpu_type%g
s%@obj_format@%$obj_format%g
s%@te_file@%$te_file%g
+s%@install_tooldir@%$install_tooldir%g
s%@atof@%$atof%g
s%@BFDLIB@%$BFDLIB%g
s%@OPCODES_LIB@%$OPCODES_LIB%g
s%@LEXLIB@%$LEXLIB%g
s%@CPP@%$CPP%g
s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
+s%@ALLOCA@%$ALLOCA%g
+s%@USE_NLS@%$USE_NLS%g
+s%@MSGFMT@%$MSGFMT%g
+s%@GMSGFMT@%$GMSGFMT%g
+s%@XGETTEXT@%$XGETTEXT%g
+s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
+s%@CATALOGS@%$CATALOGS%g
+s%@CATOBJEXT@%$CATOBJEXT%g
+s%@DATADIRNAME@%$DATADIRNAME%g
+s%@GMOFILES@%$GMOFILES%g
+s%@INSTOBJEXT@%$INSTOBJEXT%g
+s%@INTLDEPS@%$INTLDEPS%g
+s%@INTLLIBS@%$INTLLIBS%g
+s%@INTLOBJS@%$INTLOBJS%g
+s%@POFILES@%$POFILES%g
+s%@POSUB@%$POSUB%g
+s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
+s%@GT_NO@%$GT_NO%g
+s%@GT_YES@%$GT_YES%g
+s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
+s%@l@%$l%g
s%@MAINT@%$MAINT%g
s%@EXEEXT@%$EXEEXT%g
-s%@ALLOCA@%$ALLOCA%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
EOF
cat >> $CONFIG_STATUS <<EOF
+
target_cpu_type=${target_cpu_type}
obj_format=${obj_format}
te_file=${te_file}
case ${target_cpu_type} in
m32r) echo '#include "opcodes/'"${target_cpu_type}"'-opc.h"' > cgen-opc.h ;;
esac
+
+ sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile
exit 0
EOF
chmod +x $CONFIG_STATUS