ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
--enable-bfd-assembler use BFD back end for writing object files"
ac_help="$ac_help
targets alternative target configurations besides the primary"
ac_help="$ac_help
--enable-commonbfdlib build shared BFD/opcodes/libiberty library"
+ac_help="$ac_help
+ --enable-build-warnings Enable build-time compiler warnings if gcc is used"
ac_help="$ac_help
--disable-nls do not use Native Language Support"
ac_help="$ac_help
ac_n= ac_c='\c' ac_t=
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:563: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 568 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:579: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:596: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 601 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:608: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
ac_aux_dir=
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:607: checking host system type" >&5
+echo "configure:673: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:628: checking target system type" >&5
+echo "configure:694: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:646: checking build system type" >&5
+echo "configure:712: checking build system type" >&5
build_alias=$build
case "$build_alias" in
program_prefix=${target_alias}-
+ echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
+echo "configure:736: checking for strerror in -lcposix" >&5
+ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcposix $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 744 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strerror();
+
+int main() {
+strerror()
+; return 0; }
+EOF
+if { (eval echo configure:755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lcposix"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:681: checking for a BSD compatible install" >&5
+echo "configure:791: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:734: checking whether build environment is sane" >&5
+echo "configure:844: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:791: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:901: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
PACKAGE=gas
-VERSION=2.9.5
+VERSION=${BFD_VERSION}
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:837: checking for working aclocal" >&5
+echo "configure:947: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:850: checking for working autoconf" >&5
+echo "configure:960: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:863: checking for working automake" >&5
+echo "configure:973: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:876: checking for working autoheader" >&5
+echo "configure:986: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:889: checking for working makeinfo" >&5
+echo "configure:999: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=yes
fi
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:975: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1005: checking for $ac_word" >&5
+echo "configure:1085: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1035: checking for $ac_word" >&5
+echo "configure:1115: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1086: checking for $ac_word" >&5
+echo "configure:1166: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1118: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1198: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1129 "configure"
+#line 1209 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1160: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1240: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1165: checking whether we are using GNU C" >&5
+echo "configure:1245: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1254: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1193: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1273: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
+if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1236: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
+echo "configure:1316: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1260: checking for GNU ld" >&5
+echo "configure:1346: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1263: checking for non-GNU ld" >&5
+echo "configure:1349: checking for non-GNU ld" >&5
fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
done
IFS="$ac_save_ifs"
else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
-LD="$ac_cv_path_LD"
+LD="$lt_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1299: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+echo "configure:1384: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
+ lt_cv_prog_gnu_ld=yes
else
- ac_cv_prog_gnu_ld=no
+ lt_cv_prog_gnu_ld=no
fi
fi
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1401: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1315: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+echo "configure:1413: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
- ac_cv_path_NM="$NM"
+ lt_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
break
else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi
-NM="$ac_cv_path_NM"
+NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1353: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1451: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-# Define system-specific variables.
-case "$host_os" in
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1472: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
aix*)
- ac_symcode='[BCDT]'
+ lt_cv_deplibs_check_method=pass_all
;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
-solaris*)
- ac_symcode='[BDT]'
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
;;
-esac
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
+hpux10.20*|hpux11*)
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
+ ;;
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- if { (eval echo configure:1416: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1420: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
fi
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1518: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1645: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1527: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1530: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1651: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
fi
-rm -rf conftest*
-
+rm -f conftest*
fi
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1556: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
- rm -f conftestdata
- ac_cv_prog_LN_S="ln -s"
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1671: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
- echo "$ac_t""yes" 1>&6
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
else
- echo "$ac_t""no" 1>&6
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1681: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
fi
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
if test $host != $build; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1714: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 1598 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1599: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
;;
+esac
+fi
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1620: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1776: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1625 "configure"
-#include "confdefs.h"
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
-int main() {
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
-; return 0; }
EOF
-if { (eval echo configure:1632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- lt_cv_cc_needs_belf=yes
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- lt_cv_cc_needs_belf=no
+ echo "$ac_t""no" 1>&6
fi
-rm -f conftest*
+
+ else
+ MAGIC_CMD=:
+ fi
fi
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
fi
;;
+esac
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1655: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+echo "configure:1847: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
+if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1687: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+echo "configure:1879: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
+ ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
- DLLTOOL="false"
+ RANLIB=":"
fi
fi
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1722: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:1914: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test -z "$ac_cv_prog_AS"; then
+if test -z "$ac_cv_prog_STRIP"; then
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1754: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:1946: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
+ ac_cv_prog_STRIP="strip"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
- AS="false"
+ STRIP=":"
fi
fi
- ;;
-
-esac
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-# enable the --disable-libtool-lock switch
# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
enableval="$enable_libtool_lock"
- need_locks=$enableval
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
else
- need_locks=yes
+ pic_mode=default
fi
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 2013 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2047: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:2065: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2078 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
fi
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# clobbered by the next message.
exec 5>>./config.log
+
+
+
+
+
user_bfd_gas=
# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
using_cgen=no
+build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+ enableval="$enable_build_warnings"
+ case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+
+
# Generate a header file
+# If we are on a DOS filesystem, we must use gdb.ini rather than
+# .gdbinit.
+GDBINIT=".gdbinit"
+case "${host}" in
+ *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*)
+ GDBINIT="gdb.ini"
+ ;;
+esac
+
+
te_file=generic
# Makefile target for installing gas in $(tooldir)/bin.
install_tooldir=install-exec-tooldir
canon_targets=""
+all_targets=no
if test -n "$enable_targets" ; then
for t in `echo $enable_targets | sed 's/,/ /g'`; do
- result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $t 2>/dev/null`
+ if test $t = "all"; then
+ all_targets=yes
+ continue
+ fi
+ result=`$ac_config_sub $t 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
# else
endian=
case ${cpu} in
alpha*) cpu_type=alpha ;;
- armeb) cpu_type=arm endian=big ;;
- arm*) cpu_type=arm endian=little ;;
- armb*) cpu_type=arm endian=little ;;
- armv*l) cpu_type=arm endian=little ;;
- armv*b) cpu_type=arm endian=big ;;
- strongarm*) cpu_type=arm endian=little ;;
- thumb*) cpu_type=arm endian=little ;;
+ arm*b|xscale*b|strongarm*b) cpu_type=arm endian=big ;;
+ arm*|xscale*|strongarm*) cpu_type=arm endian=little ;;
hppa*) cpu_type=hppa ;;
- i[456]86) cpu_type=i386 ;;
+ i[3-7]86) cpu_type=i386 arch=i386;;
+ x86_64) cpu_type=i386 arch=x86_64;;
+ ia64) cpu_type=ia64 ;;
+ ip2k) cpu_type=ip2k endian=big ;;
+ iq2000) cpu_type=iq2000 endian=big ;;
+ m6811|m6812|m68hc12) cpu_type=m68hc11 ;;
m680[012346]0) cpu_type=m68k ;;
m68008) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little ;;
mips*) cpu_type=mips endian=big ;;
- powerpcle*) cpu_type=ppc endian=little ;;
+ or32*) cpu_type=or32 endian=big ;;
+ pjl*) cpu_type=pj endian=little ;;
+ pj*) cpu_type=pj endian=big ;;
+ powerpc*le*) cpu_type=ppc endian=little ;;
powerpc*) cpu_type=ppc endian=big ;;
rs6000*) cpu_type=ppc ;;
+ s390x*) cpu_type=s390 arch=s390x ;;
+ s390*) cpu_type=s390 arch=s390 ;;
+ sh5*) cpu_type=sh64 endian=big ;;
+ sh5le*) cpu_type=sh64 endian=little ;;
+ sh64*) cpu_type=sh64 endian=big ;;
+ sh64le*) cpu_type=sh64 endian=little ;;
+ sh*le) cpu_type=sh endian=little ;;
+ sh*) cpu_type=sh endian=big ;;
sparclite*) cpu_type=sparc arch=sparclite ;;
sparclet*) cpu_type=sparc arch=sparclet ;;
sparc64*) cpu_type=sparc arch=v9-64 ;;
sparc86x*) cpu_type=sparc arch=sparc86x ;;
sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
v850*) cpu_type=v850 ;;
+ xtensa*) cpu_type=xtensa arch=xtensa ;;
*) cpu_type=${cpu} ;;
esac
# assign object format
case ${generic_target} in
- a29k-*-coff) fmt=coff ;;
- a29k-amd-udi) fmt=coff ;;
- a29k-amd-ebmon) fmt=coff ;;
- a29k-nyu-sym1) fmt=coff ;;
- a29k-*-vxworks*) fmt=coff ;;
-
- alpha*-*-*vms*) fmt=evax ;;
- alpha*-*-netware*) fmt=ecoff ;;
- alpha*-*-openbsd*) fmt=ecoff ;;
- alpha*-*-osf*) fmt=ecoff ;;
- alpha*-*-linuxecoff*) fmt=ecoff ;;
- alpha*-*-linux-gnu*) fmt=elf em=linux ;;
- alpha*-*-netbsd*) fmt=elf em=nbsd ;;
-
- arc-*-elf*) fmt=elf bfd_gas=yes ;;
-
- arm-*-aout) fmt=aout ;;
- arm-*-coff | thumb-*-coff) fmt=coff ;;
- arm-*-elf | thumb-*-elf) fmt=elf ;;
- arm-*-linux*aout*) fmt=aout em=linux ;;
- arm-*-linux* | armv*-*-linux-gnu) fmt=elf em=linux ;;
- arm-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- arm-*-oabi | thumb-*-oabi) fmt=elf ;;
- arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;;
- arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
- arm-*-riscix*) fmt=aout em=riscix ;;
-
- d10v-*-*) fmt=elf bfd_gas=yes ;;
- d30v-*-*) fmt=elf bfd_gas=yes ;;
-
-
- fr30-*-*) fmt=elf bfd_gas=yes ;;
-
- hppa-*-*elf*) fmt=elf em=hppa ;;
- hppa-*-linux-gnu*) fmt=elf em=hppa ;;
- hppa-*-lites*) fmt=elf em=hppa ;;
- hppa-*-osf*) fmt=som em=hppa ;;
- hppa-*-rtems*) fmt=elf em=hppa ;;
- hppa-*-hpux*) fmt=som em=hppa ;;
- hppa-*-mpeix*) fmt=som em=hppa ;;
- hppa-*-bsd*) fmt=som em=hppa ;;
- hppa-*-hiux*) fmt=som em=hppa ;;
-
- h8300-*-coff) fmt=coff ;;
-
- i386-ibm-aix*) fmt=coff em=i386aix ;;
- i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
- i386-*-beospe*) fmt=coff em=pe bfd_gas=yes ;;
- i386-*-beoself* | i386-*-beos*) fmt=elf bfd_gas=yes ;;
- i386-*-bsd*) fmt=aout em=386bsd ;;
- i386-*-netbsd0.8) fmt=aout em=386bsd ;;
- i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
- i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;;
- i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
- i386-*-lynxos*) fmt=coff em=lynx ;;
- i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
- fmt=elf bfd_gas=yes ;;
- i386-*-freebsdaout* | i386-*-freebsd12.* | i386-*-freebsd12)
- fmt=aout em=386bsd ;;
- i386-*-freebsd*) fmt=elf bfd_gas=yes ;;
- i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*)
- fmt=coff ;;
- i386-*-sco3.2v5*) fmt=elf
- if test ${this_target} = $target; then
- cat >> confdefs.h <<\EOF
+ a29k-*-coff) fmt=coff ;;
+ a29k-amd-udi) fmt=coff ;;
+ a29k-amd-ebmon) fmt=coff ;;
+ a29k-nyu-sym1) fmt=coff ;;
+ a29k-*-rtems*) fmt=coff ;;
+ a29k-*-vxworks*) fmt=coff ;;
+
+ alpha*-*-*vms*) fmt=evax ;;
+ alpha*-*-netware*) fmt=ecoff ;;
+ alpha*-*-osf*) fmt=ecoff ;;
+ alpha*-*-linuxecoff*) fmt=ecoff ;;
+ alpha*-*-linux-gnu*) fmt=elf em=linux ;;
+ alpha*-*-netbsd*) fmt=elf em=nbsd ;;
+ alpha*-*-openbsd*) fmt=elf em=obsd ;;
+
+ arc-*-elf*) fmt=elf ;;
+
+ arm-*-aout) fmt=aout ;;
+ arm-*-coff | thumb-*-coff) fmt=coff ;;
+ arm-*-rtems | thumb-*-rtems) fmt=elf ;;
+ arm-*-elf | thumb-*-elf) fmt=elf ;;
+ arm-*-kaos*) fmt=elf ;;
+ arm*-*-conix*) fmt=elf ;;
+ arm-*-linux*aout*) fmt=aout em=linux ;;
+ arm*-*-linux-gnu*) fmt=elf em=linux ;;
+ arm*-*-uclinux*) fmt=elf em=linux ;;
+ arm-*-netbsdelf*) fmt=elf em=nbsd ;;
+ arm-*-*n*bsd*) fmt=aout em=nbsd ;;
+ arm-**-nto*) fmt=elf ;;
+ arm-*-oabi | thumb-*-oabi) fmt=elf ;;
+ arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;;
+ arm-*-wince) fmt=coff em=wince-pe ;;
+ arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
+ arm-*-riscix*) fmt=aout em=riscix ;;
+ arm-*-vxworks) fmt=coff ;;
+
+ avr-*-*) fmt=elf ;;
+
+ cris-*-*) fmt=multi bfd_gas=yes ;;
+
+ d10v-*-*) fmt=elf ;;
+ d30v-*-*) fmt=elf ;;
+ dlx-*-*) fmt=elf ;;
+
+ fr30-*-*) fmt=elf ;;
+ frv-*-*) fmt=elf ;;
+
+ hppa-*-linux*) case ${cpu} in
+ hppa*64*) fmt=elf em=hppalinux64;;
+ hppa*) fmt=elf em=linux;;
+ esac ;;
+ hppa-*-*elf*) fmt=elf em=hppa ;;
+ hppa-*-lites*) fmt=elf em=hppa ;;
+ hppa-*-netbsd*) fmt=elf em=nbsd ;;
+ hppa-*-openbsd*) fmt=elf em=hppa ;;
+ hppa-*-osf*) fmt=som em=hppa ;;
+ hppa-*-rtems*) fmt=elf em=hppa ;;
+ hppa-*-hpux11*) case ${cpu} in
+ hppa*64*) fmt=elf em=hppa64 ;;
+ hppa*) fmt=som em=hppa ;;
+ esac ;;
+ hppa-*-hpux*) fmt=som em=hppa ;;
+ hppa-*-mpeix*) fmt=som em=hppa ;;
+ hppa-*-bsd*) fmt=som em=hppa ;;
+ hppa-*-hiux*) fmt=som em=hppa ;;
+
+ h8300-*-rtems*) fmt=coff ;;
+ h8300-*-coff) fmt=coff ;;
+ h8300-*-elf) fmt=elf ;;
+ h8500-*-rtems*) fmt=coff ;;
+ h8500-*-coff) fmt=coff ;;
+
+ i370-*-elf* | i370-*-linux*) fmt=elf ;;
+ i386-ibm-aix*) fmt=coff em=i386aix ;;
+ i386-sequent-bsd*) fmt=aout em=dynix ;;
+ i386-*-beospe*) fmt=coff em=pe ;;
+ i386-*-beos*) fmt=elf ;;
+ i386-*-coff) fmt=coff ;;
+ i386-*-elf) fmt=elf ;;
+ i386-*-kaos*) fmt=elf ;;
+ i386-*-bsd*) fmt=aout em=386bsd ;;
+ i386-*-netbsd0.8) fmt=aout em=386bsd ;;
+ i386-*-netbsdpe*) fmt=coff em=pe ;;
+ i386-*-netbsdelf*) fmt=elf em=nbsd ;;
+ i386-*-*n*bsd*) case ${cpu} in
+ x86_64) fmt=elf em=nbsd ;;
+ *) fmt=aout em=nbsd ;;
+ esac ;;
+ i386-*-linux*aout*) fmt=aout em=linux ;;
+ i386-*-linux*oldld) fmt=aout em=linux ;;
+ i386-*-linux*coff*) fmt=coff em=linux ;;
+ i386-*-linux-gnu*) fmt=elf em=linux ;;
+ x86_64-*-linux-gnu*) fmt=elf em=linux ;;
+ i386-*-lynxos*) fmt=coff em=lynx ;;
+ i386-*-sysv[45]*) fmt=elf ;;
+ i386-*-solaris*) fmt=elf ;;
+ i386-*-freebsdaout*) fmt=aout em=386bsd ;;
+ i386-*-freebsd[12].*) fmt=aout em=386bsd ;;
+ i386-*-freebsd[12]) fmt=aout em=386bsd ;;
+ i386-*-sysv*) fmt=coff ;;
+ i386-*-sco3.2v5*coff) fmt=coff ;;
+ i386-*-isc*) fmt=coff ;;
+ i386-*-sco3.2v5*) fmt=elf
+ if test ${this_target} = $target; then
+ cat >> confdefs.h <<\EOF
#define SCO_ELF 1
EOF
- fi
- ;;
- i386-*-sco3.2*) fmt=coff ;;
- i386-*-vsta) fmt=aout ;;
- i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*)
- fmt=coff em=go32;;
- i386-*-rtemself*) fmt=elf ;;
- i386-*-rtems*) fmt=coff ;;
- i386-*-gnu*) fmt=elf ;;
- i386-*-mach*)
- fmt=aout em=mach bfd_gas=yes ;;
- i386-*-msdos*) fmt=aout ;;
- i386-*-moss*) fmt=elf ;;
- i386-*-pe) fmt=coff em=pe ;;
- i386-*-cygwin*) fmt=coff em=pe bfd_gas=yes ;;
- i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;;
- i386-*-*nt*) fmt=coff em=pe ;;
- i386-*-vxworks*) fmt=aout ;;
- i960-*-bout) fmt=bout ;;
- i960-*-coff) fmt=coff em=ic960 ;;
- i960-*-rtems*) fmt=coff em=ic960 ;;
- i960-*-nindy*) fmt=bout ;;
- i960-*-vxworks4*) fmt=bout ;;
- i960-*-vxworks5.0) fmt=bout ;;
- i960-*-vxworks5.*) fmt=coff em=ic960 ;;
- i960-*-vxworks*) fmt=bout ;;
- i960-*-elf*) fmt=elf ;;
-
- m32r-*-*) fmt=elf bfd_gas=yes ;;
-
- m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
- fmt=aout em=sun3 ;;
- m68k-motorola-sysv*) fmt=coff em=delta ;;
- m68k-bull-sysv3*) fmt=coff em=dpx2 ;;
- m68k-apollo-*) fmt=coff em=apollo ;;
- m68k-*-sysv4*) # must be before -sysv*
- fmt=elf em=svr4 ;;
- m68k-*-elf*) fmt=elf ;;
- m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
- fmt=coff ;;
- m68k-*-hpux*) fmt=hp300 em=hp300 ;;
- m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux-gnu*) fmt=elf em=linux ;;
- m68k-*-gnu*) fmt=elf ;;
- m68k-*-lynxos*) fmt=coff em=lynx ;;
- m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- m68k-apple-aux*) fmt=coff em=aux ;;
- m68k-*-psos*) fmt=elf em=psos;;
-
- m88k-motorola-sysv3*) fmt=coff em=delt88 ;;
- m88k-*-coff*) fmt=coff ;;
-
- mcore-*-elf) fmt=elf bfd_gas=yes ;;
- mcore-*-pe) fmt=coff em=pe bfd_gas=yes ;;
-
- # don't change em like *-*-bsd does
- mips-dec-netbsd*) fmt=elf endian=little ;;
- mips-dec-openbsd*) fmt=elf endian=little ;;
- mips-dec-bsd*) fmt=aout endian=little ;;
- mips-sony-bsd*) fmt=ecoff ;;
- mips-*-bsd*) { echo "configure: error: Unknown vendor for mips-bsd configuration." 1>&2; exit 1; } ;;
- mips-*-ultrix*) fmt=ecoff endian=little ;;
- mips-*-osf*) fmt=ecoff endian=little ;;
- mips-*-ecoff*) fmt=ecoff ;;
- mips-*-ecoff*) fmt=ecoff ;;
- mips-*-irix6*) fmt=elf ;;
- mips-*-irix5*) fmt=elf ;;
- mips-*-irix*) fmt=ecoff ;;
- mips-*-lnews*) fmt=ecoff em=lnews ;;
- mips-*-riscos*) fmt=ecoff ;;
- mips-*-sysv*) fmt=ecoff ;;
- mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*)
- fmt=elf ;;
- mips-*-vxworks*) fmt=elf
- cat >> confdefs.h <<\EOF
-#define MIPS_STABS_ELF 1
-EOF
-
- ;;
- mn10200-*-*) fmt=elf bfd_gas=yes ;;
- mn10300-*-*) fmt=elf bfd_gas=yes ;;
- ppc-*-pe | ppc-*-cygwin* | ppc-*-winnt*)
- fmt=coff em=pe ;;
- ppc-*-aix*) fmt=coff ;;
- ppc-*-beos*) fmt=coff ;;
- ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
- fmt=elf ;;
- ppc-*-linux-gnu*) fmt=elf
- case "$endian" in
- big) ;;
- *) { echo "configure: error: GNU/Linux must be configured big endian" 1>&2; exit 1; } ;;
- esac
- ;;
- ppc-*-solaris*) fmt=elf
- if test ${this_target} = $target; then
- cat >> confdefs.h <<\EOF
-#define TARGET_SOLARIS_COMMENT 1
+ fi ;;
+ i386-*-sco3.2*) fmt=coff ;;
+ i386-*-vsta) fmt=aout ;;
+ i386-*-msdosdjgpp* \
+ | i386-*-go32* \
+ | i386-go32-rtems*) fmt=coff em=go32
+ cat >> confdefs.h <<\EOF
+#define STRICTCOFF 1
+EOF
+ ;;
+ i386-*-rtemself*) fmt=elf ;;
+ i386-*-rtemscoff*) fmt=coff ;;
+ i386-*-rtems*) fmt=elf ;;
+ i386-*-gnu*) fmt=elf ;;
+ i386-*-mach*) fmt=aout em=mach ;;
+ i386-*-msdos*) fmt=aout ;;
+ i386-*-moss*) fmt=elf ;;
+ i386-*-pe) fmt=coff em=pe ;;
+ i386-*-cygwin*) fmt=coff em=pe ;;
+ i386-*-interix*) fmt=coff em=interix ;;
+ i386-*-mingw32*) fmt=coff em=pe ;;
+ i386-*-nto-qnx*) fmt=elf ;;
+ i386-*-*nt*) fmt=coff em=pe ;;
+ i386-*-vxworks*) fmt=aout ;;
+ i386-*-chaos) fmt=elf ;;
+
+ i860-*-*) fmt=elf endian=little
+ echo "configure: warning: GAS support for ${generic_target} is preliminary and a work in progress" 1>&2 ;;
+ i960-*-bout) fmt=bout ;;
+ i960-*-coff) fmt=coff em=ic960 ;;
+ i960-*-rtems*) fmt=coff em=ic960 ;;
+ i960-*-nindy*) fmt=bout ;;
+ i960-*-vxworks5.0) fmt=bout ;;
+ i960-*-vxworks5.*) fmt=coff em=ic960 ;;
+ i960-*-vxworks*) fmt=bout ;;
+ i960-*-elf*) fmt=elf ;;
+
+ ia64-*-elf*) fmt=elf ;;
+ ia64-*-aix*) fmt=elf em=ia64aix ;;
+ ia64-*-linux-gnu*) fmt=elf em=linux ;;
+ ia64-*-hpux*) fmt=elf em=hpux ;;
+ ia64-*-netbsd*) fmt=elf em=nbsd ;;
+
+ ip2k-*-*) fmt=elf ;;
+
+ iq2000-*-elf) fmt=elf bfd_gas=yes ;;
+
+ m32r-*-*) fmt=elf ;;
+
+ m68hc11-*-* | m6811-*-*) fmt=elf ;;
+ m68hc12-*-* | m6812-*-*) fmt=elf ;;
+
+ m68k-*-vxworks*) fmt=aout em=sun3 ;;
+ m68k-ericsson-ose) fmt=aout em=sun3 ;;
+ m68k-*-sunos*) fmt=aout em=sun3 ;;
+ m68k-motorola-sysv*) fmt=coff em=delta ;;
+ m68k-bull-sysv3*) fmt=coff em=dpx2 ;;
+ m68k-apollo-*) fmt=coff em=apollo ;;
+ m68k-*-elf*) fmt=elf ;;
+ m68k-*-sysv4*) fmt=elf em=svr4 ;;
+ m68k-*-sysv*) fmt=coff ;;
+ m68k-*-coff | m68k-*-rtemscoff*) fmt=coff ;;
+ m68k-*-rtems*) fmt=elf ;;
+ m68k-*-hpux*) fmt=hp300 em=hp300 ;;
+ m68k-*-linux*aout*) fmt=aout em=linux ;;
+ m68k-*-linux-gnu*) fmt=elf em=linux ;;
+ m68k-*-gnu*) fmt=elf ;;
+ m68k-*-lynxos*) fmt=coff em=lynx ;;
+ m68k-*-netbsdelf*) fmt=elf em=nbsd ;;
+ m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ m68k-apple-aux*) fmt=coff em=aux ;;
+ m68k-*-psos*) fmt=elf em=psos;;
+
+ m88k-motorola-sysv3*) fmt=coff em=delt88 ;;
+ m88k-*-coff*) fmt=coff ;;
+
+ mcore-*-elf) fmt=elf ;;
+ mcore-*-pe) fmt=coff em=pe bfd_gas=yes ;;
+
+ # don't change em like *-*-bsd does
+ mips-dec-openbsd*) fmt=elf endian=little ;;
+ mips-dec-bsd*) fmt=aout endian=little ;;
+ mips-sony-bsd*) fmt=ecoff ;;
+ mips-*-bsd*)
+ { echo "configure: error: Unknown vendor for mips-bsd configuration." 1>&2; exit 1; } ;;
+ mips-*-ultrix*) fmt=ecoff endian=little ;;
+ mips-*-osf*) fmt=ecoff endian=little ;;
+ mips-*-ecoff*) fmt=ecoff ;;
+ mips-*-pe*) fmt=coff endian=little em=pe ;;
+ mips-*-irix6*) fmt=elf em=irix ;;
+ mips-*-irix5*) fmt=elf em=irix ;;
+ mips-*-irix*) fmt=ecoff em=irix ;;
+ mips-*-lnews*) fmt=ecoff em=lnews ;;
+ mips-*-riscos*) fmt=ecoff ;;
+ mips*-*-linux*) fmt=elf em=tmips ;;
+ mips-*-sysv4*MP* | mips-*-gnu*) fmt=elf em=tmips ;;
+ mips-*-sysv*) fmt=ecoff ;;
+ mips-*-elf* | mips-*-rtems*) fmt=elf ;;
+ mips-*-netbsd*) fmt=elf ;;
+ mips-*-openbsd*) fmt=elf ;;
+ mips-*-vxworks*) fmt=elf ;;
+
+ mmix-*-*) fmt=elf ;;
+ mn10200-*-*) fmt=elf ;;
+ mn10300-*-*) fmt=elf ;;
+ msp430-*-*) fmt=elf ;;
+ openrisc-*-*) fmt=elf ;;
+ or32-*-rtems*) fmt=coff ;;
+ or32-*-coff) fmt=coff ;;
+ or32-*-elf) fmt=elf ;;
+ pj*) fmt=elf ;;
+
+ ppc-*-pe | ppc-*-cygwin*) fmt=coff em=pe ;;
+ ppc-*-winnt*) fmt=coff em=pe ;;
+ ppc-*-aix5*) fmt=coff em=aix5 ;;
+ ppc-*-aix*) fmt=coff ;;
+ ppc-*-beos*) fmt=coff ;;
+ ppc-*-*n*bsd* | ppc-*-elf*) fmt=elf ;;
+ ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;;
+ ppc-*-linux-gnu*) fmt=elf
+ case "$endian" in
+ big) ;;
+ *) { echo "configure: error: GNU/Linux must be configured big endian" 1>&2; exit 1; } ;;
+ esac ;;
+ ppc-*-solaris*) fmt=elf
+ if test ${this_target} = $target; then
+ cat >> confdefs.h <<\EOF
+#define TARGET_SOLARIS_COMMENT 1
+EOF
+
+ fi
+ if test x${endian} = xbig; then
+ { echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; }
+ fi ;;
+ ppc-*-rtems*) fmt=elf ;;
+ ppc-*-macos* | ppc-*-mpw*) fmt=coff em=macos ;;
+ ppc-*-netware*) fmt=elf em=ppcnw ;;
+ ppc-**-nto*) fmt=elf ;;
+ ppc-*-vxworks*) fmt=elf ;;
+ ppc-*-windiss*) fmt=elf ;;
+ ppc-*-kaos*) fmt=elf ;;
+
+ s390x-*-linux-gnu*) fmt=elf em=linux ;;
+ s390-*-linux-gnu*) fmt=elf em=linux ;;
+
+ sh*-*-linux*) fmt=elf em=linux
+ case ${cpu} in
+ sh*eb) endian=big ;;
+ *) endian=little ;;
+ esac ;;
+ sh5*-*-netbsd*) fmt=elf em=nbsd ;;
+ sh64*-*-netbsd*) fmt=elf em=nbsd ;;
+ sh*-*-netbsdelf*) fmt=elf em=nbsd ;;
+ sh-*-elf*) fmt=elf ;;
+ sh-*-coff*) fmt=coff ;;
+ sh-*-nto*) fmt=elf ;;
+ sh-*-pe*) fmt=coff em=pe bfd_gas=yes endian=little ;;
+ sh-*-rtemself*) fmt=elf ;;
+ sh-*-rtems*) fmt=coff ;;
+ sh-*-kaos*) fmt=elf ;;
+ shle*-*-kaos*) fmt=elf ;;
+ sh64-*-elf*) fmt=elf ;;
+
+ ns32k-pc532-mach*) fmt=aout em=pc532mach ;;
+ ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
+ ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
+ ns32k-*-*n*bsd*) fmt=aout em=nbsd532 ;;
+
+ sparc-*-rtemsaout*) fmt=aout ;;
+ sparc-*-rtemself*) fmt=elf ;;
+ sparc-*-rtems*) fmt=elf ;;
+ sparc-*-sunos4*) fmt=aout em=sun3 ;;
+ sparc-*-aout | sparc*-*-vxworks*) fmt=aout em=sparcaout ;;
+ sparc-*-coff) fmt=coff ;;
+ sparc-*-linux*aout*) fmt=aout em=linux ;;
+ sparc-*-linux-gnu*) fmt=elf em=linux ;;
+ sparc-*-lynxos*) fmt=coff em=lynx ;;
+ sparc-fujitsu-none) fmt=aout ;;
+ sparc-*-elf) fmt=elf ;;
+ sparc-*-sysv4*) fmt=elf ;;
+ sparc-*-solaris*) fmt=elf ;;
+ sparc-*-netbsdelf*) fmt=elf em=nbsd ;;
+ sparc-*-*n*bsd*) case ${cpu} in
+ sparc64) fmt=elf em=nbsd ;;
+ *) fmt=aout em=nbsd ;;
+ esac ;;
+ strongarm-*-coff) fmt=coff ;;
+ strongarm-*-elf) fmt=elf ;;
+ strongarm-*-kaos*) fmt=elf ;;
+ xscale-*-coff) fmt=coff ;;
+ xscale-*-elf) fmt=elf ;;
+
+ tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
+ tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
+ tic4x-*-* | c4x-*-*) fmt=coff bfd_gas=yes ;;
+ tic54x-*-* | c54x*-*-*) fmt=coff bfd_gas=yes need_libm=yes;;
+ tic80-*-*) fmt=coff ;;
+
+ v850-*-*) fmt=elf ;;
+ v850e-*-*) fmt=elf ;;
+ v850ea-*-*) fmt=elf ;;
+
+ vax-*-netbsdelf*) fmt=elf em=nbsd ;;
+ vax-*-netbsd*) fmt=aout em=nbsd ;;
+ vax-*-bsd* | vax-*-ultrix*) fmt=aout ;;
+ vax-*-vms) fmt=vms ;;
+
+ w65-*-*) fmt=coff ;;
+
+ xstormy16-*-*) fmt=elf ;;
+
+ xtensa-*-*) fmt=elf ;;
+
+ z8k-*-coff | z8k-*-sim) fmt=coff ;;
+
+ *-*-aout | *-*-scout) fmt=aout ;;
+ *-*-freebsd*) fmt=elf em=freebsd ;;
+ *-*-nindy*) fmt=bout ;;
+ *-*-bsd*) fmt=aout em=sun3 ;;
+ *-*-generic) fmt=generic ;;
+ *-*-xray | *-*-hms) fmt=coff ;;
+ *-*-sim) fmt=coff ;;
+ *-*-elf | *-*-sysv4* | *-*-solaris*) fmt=elf dev=yes ;;
+ *-*-aros*) fmt=elf em=linux bfd_gas=yes ;;
+ *-*-vxworks) fmt=aout ;;
+ *-*-netware) fmt=elf ;;
+ esac
+
+ if test ${this_target} = $target ; then
+ endian_def=
+ if test x${endian} = xbig; then
+ endian_def=1
+ elif test x${endian} = xlittle; then
+ endian_def=0
+ fi
+ if test x${endian_def} != x; then
+ cat >> confdefs.h <<EOF
+#define TARGET_BYTES_BIG_ENDIAN $endian_def
+EOF
+
+ fi
+ fi
+
+ case ${cpu_type}-${fmt} in
+ alpha*-* | arm-* | i386-* | ia64*-* | mips-* | ns32k-* \
+ | pdp11-* | ppc-* | sparc-* | strongarm-* | xscale-* \
+ | *-elf | *-ecoff | *-som)
+ bfd_gas=yes ;;
+ esac
+
+# Other random stuff.
+
+ case ${cpu_type} in
+ mips)
+ # Set mips_cpu to the name of the default CPU.
+ case ${target_cpu} in
+ mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el)
+ mips_cpu=from-abi
+ ;;
+ mipsisa32 | mipsisa32el)
+ mips_cpu=mips32
+ ;;
+ mipsisa32r2 | mipsisa32r2el)
+ mips_cpu=mips32r2
+ ;;
+ mipsisa64 | mipsisa64el)
+ mips_cpu=mips64
+ ;;
+ mipstx39 | mipstx39el)
+ mips_cpu=r3900
+ ;;
+ mips64vr | mips64vrel)
+ mips_cpu=vr4100
+ ;;
+ mipsisa32r2*)
+ mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'`
+ ;;
+ mips64* | mipsisa64* | mipsisa32*)
+ mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'`
+ ;;
+ *)
+ { echo "configure: error: $target_cpu isn't a supported MIPS CPU name" 1>&2; exit 1; }
+ ;;
+ esac
+ # See whether it's appropriate to set E_MIPS_ABI_O32 for o32
+ # binaries. It's a GNU extension that some OSes don't understand.
+ # The value only matters on ELF targets.
+ case ${target} in
+ *-*-irix*)
+ use_e_mips_abi_o32=0
+ ;;
+ *)
+ use_e_mips_abi_o32=1
+ ;;
+ esac
+ # Decide whether to generate 32-bit or 64-bit code by default.
+ # Used to resolve -march=from-abi when an embedded ABI is selected.
+ case ${target} in
+ mips64*-*-* | mipsisa64*-*-*)
+ mips_default_64bit=1
+ ;;
+ *)
+ mips_default_64bit=0
+ ;;
+ esac
+ # Decide which ABI to target by default.
+ case ${target} in
+ mips64*-linux* | mips-sgi-irix6*)
+ mips_default_abi=N32_ABI
+ ;;
+ mips*-linux*)
+ mips_default_abi=O32_ABI
+ ;;
+ *)
+ mips_default_abi=NO_ABI
+ ;;
+ esac
+ cat >> confdefs.h <<EOF
+#define MIPS_CPU_STRING_DEFAULT "$mips_cpu"
+EOF
+
+ cat >> confdefs.h <<EOF
+#define USE_E_MIPS_ABI_O32 $use_e_mips_abi_o32
EOF
- fi
- if test x${endian} = xbig; then
- { echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; }
- fi
- ;;
- ppc-*-rtems*) fmt=elf ;;
- ppc-*-macos* | ppc-*-mpw*)
- fmt=coff em=macos ;;
- ppc-*-netware*) fmt=elf em=ppcnw ;;
- ppc-*-vxworks*) fmt=elf ;;
-
- sh-*-elf*) fmt=elf ;;
- sh-*-coff*) fmt=coff ;;
- sh-*-rtemself*) fmt=elf ;;
- sh-*-rtems*) fmt=coff ;;
-
- ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
- ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
- ns32k-pc532-openbsd*) fmt=aout em=nbsd532 ;;
-
- sparc-*-rtems*) fmt=aout ;;
- sparc-*-sunos4*) fmt=aout em=sun3 ;;
- sparc-*-aout | sparc*-*-vxworks*)
- fmt=aout em=sparcaout ;;
- sparc-*-coff) fmt=coff ;;
- sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux-gnu*) fmt=elf em=linux ;;
- sparc-*-lynxos*) fmt=coff em=lynx ;;
- sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
- fmt=elf ;;
- sparc-*-netbsd*) fmt=aout em=nbsd ;;
- sparc-*-openbsd*) fmt=aout em=nbsd ;;
-
- strongarm-*-coff) fmt=coff ;;
- strongarm-*-elf) fmt=elf ;;
-
- tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
- tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
- tic80-*-*) fmt=coff ;;
-
- v850-*-*) fmt=elf bfd_gas=yes ;;
- v850e-*-*) fmt=elf bfd_gas=yes ;;
- v850ea-*-*) fmt=elf bfd_gas=yes ;;
-
- vax-*-bsd* | vax-*-ultrix*)
- fmt=aout ;;
- vax-*-vms) fmt=vms ;;
-
-
- z8k-*-coff | z8k-*-sim)
- fmt=coff ;;
-
- w65-*-*) fmt=coff ;;
-
- *-*-aout | *-*-scout)
- fmt=aout ;;
- *-*-nindy*)
- fmt=bout ;;
- *-*-bsd*)
- fmt=aout em=sun3 ;;
- *-*-generic) fmt=generic ;;
- *-*-xray | *-*-hms) fmt=coff ;;
- *-*-sim) fmt=coff ;;
- *-*-elf | *-*-sysv4* | *-*-solaris*)
- echo "configure: warning: GAS support for ${generic_target} is incomplete." 1>&2
- fmt=elf dev=yes ;;
- *-*-vxworks) fmt=aout ;;
- *-*-netware) fmt=elf ;;
- esac
-
- if test ${this_target} = $target ; then
- endian_def=
- if test x${endian} = xbig; then
- endian_def=1
- elif test x${endian} = xlittle; then
- endian_def=0
- fi
- if test x${endian_def} != x; then
cat >> confdefs.h <<EOF
-#define TARGET_BYTES_BIG_ENDIAN $endian_def
+#define MIPS_DEFAULT_64BIT $mips_default_64bit
EOF
- fi
- fi
+ cat >> confdefs.h <<EOF
+#define MIPS_DEFAULT_ABI $mips_default_abi
+EOF
- case ${cpu_type}-${fmt} in
- alpha*-*) bfd_gas=yes ;;
- arm-*) bfd_gas=yes ;;
- # not yet
- # i386-aout) bfd_gas=preferred ;;
- mips-*) bfd_gas=yes ;;
- ns32k-*) bfd_gas=yes ;;
- ppc-*) bfd_gas=yes ;;
- sparc-*) bfd_gas=yes ;;
- strongarm-*) bfd_gas=yes ;;
- *-elf) bfd_gas=yes ;;
- *-ecoff) bfd_gas=yes ;;
- *-som) bfd_gas=yes ;;
- *) ;;
+ ;;
esac
-# Other random stuff.
-
# Do we need the opcodes library?
case ${cpu_type} in
vax | i386 | tic30)
# Any other special object files needed ?
case ${cpu_type} in
- fr30 | m32r)
+ fr30 | ip2k | iq2000 | m32r | openrisc)
using_cgen=yes
;;
+ frv)
+ using_cgen=yes
+ ;;
m68k)
case ${extra_objects} in
*m68k-parse.o*) ;;
fi
;;
- sparc)
+ i386 | s390 | sparc)
if test $this_target = $target ; then
cat >> confdefs.h <<EOF
#define DEFAULT_ARCH "${arch}"
fi
;;
+
+ xstormy16)
+ using_cgen=yes
+ ;;
+
+ xtensa)
+ echo ${extra_objects} | grep -s "xtensa-relax.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects xtensa-relax.o"
+ fi
+ ;;
+
*)
;;
esac
case ${generic_target}-${fmt} in
mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- mips-*-linux-gnu*-*) case "$endian" in
- big) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- *) emulation="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
+ mips*-*-linux*-*) case "$endian" in
+ big) emulation="mipsbelf mipslelf mipself" ;;
+ *) emulation="mipslelf mipsbelf mipself" ;;
esac ;;
mips-*-lnews*-ecoff) ;;
mips-*-*-ecoff) case "$endian" in
mips-*-*-elf) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
- # Uncommenting the next line will turn on support for i386 COFF
- # in any i386 ELF configuration. This probably doesn't work
- # correctly.
- # i386-*-*-elf) emulation="i386coff i386elf" ;;
esac ;;
+ mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
+ # i386-pc-pe-coff != i386-pc-coff.
+ i386-*-pe-coff) ;;
+ # Uncommenting the next line will turn on support for i386 AOUT
+ # for the default linux configuration
+ # i386-*-linux*-elf) emulation="i386elf i386aout" ;;
+ #
+ i386-*-aout) emulation="i386aout" ;;
+ i386-*-coff) emulation="i386coff" ;;
+ i386-*-elf) emulation="i386elf" ;;
+
+ # Always all formats. The first stated emulation becomes the default.
+ cris-*-*aout*) emulation="crisaout criself" ;;
+ cris-*-*) emulation="criself crisaout" ;;
esac
emulations="$emulations $emulation"
done
+# Turn on all targets if possible
+if test ${all_targets} = "yes"; then
+ case ${target_cpu_type} in
+ i386)
+ case ${obj_format} in
+ aout)
+ emulations="$emulations i386coff i386elf"
+ ;;
+ coff)
+ emulations="$emulations i386aout i386elf"
+ ;;
+ elf)
+ emulations="$emulations i386aout i386coff"
+ ;;
+ esac
+ ;;
+ esac
+fi
+
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
case ${target_cpu} in
vax | tahoe ) atof=${target_cpu} ;;
+ pdp11) atof=vax ;;
*) atof=ieee ;;
esac
for em in . $emulations ; do
case $em in
.) continue ;;
- mipsbelf | mipslelf)
+ mipsbelf | mipslelf | mipself)
fmt=elf file=mipself ;;
- mipsbecoff | mipslecoff)
+ mipsbecoff | mipslecoff | mipsecoff)
fmt=ecoff file=mipsecoff ;;
- i386coff)
- fmt=coff file=i386coff ;;
- i386elf)
- fmt=elf file=i386elf ;;
+ *coff)
+ fmt=coff file=$em ;;
+ *aout)
+ fmt=aout file=$em ;;
+ *elf)
+ fmt=elf file=$em ;;
esac
formats="$formats $fmt"
emfiles="$emfiles e-$file.o"
obj_format=multi
fi
if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
- te_file=multi
- extra_objects="$extra_objects $emfiles"
DEFAULT_EMULATION=`set . $emulations ; echo $2`
- cat >> confdefs.h <<\EOF
+ # e-mips* has more than one emulation per file, e-i386* has just one at the
+ # moment. If only one emulation is specified, then don't define
+ # USE_EMULATIONS or include any of the e-files as they will only be bloat.
+ case "${obj_format}${emfiles}" in
+ multi* | *mips*)
+ extra_objects="$extra_objects $emfiles"
+ cat >> confdefs.h <<\EOF
#define USE_EMULATIONS 1
EOF
-
+ ;;
+ esac
fi
cat >> confdefs.h <<EOF
case "${need_bfd}" in
yes)
BFDLIB=../bfd/libbfd.la
- ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
+ BFDVER_H=../bfd/bfdver.h
+ ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
;;
esac
+
cat >> confdefs.h <<EOF
#define TARGET_ALIAS "${target_alias}"
EOF
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2677: checking for $ac_word" >&5
+echo "configure:3268: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2707: checking for $ac_word" >&5
+echo "configure:3298: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2758: checking for $ac_word" >&5
+echo "configure:3349: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2790: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:3381: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2801 "configure"
+#line 3392 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2832: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:3423: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2837: checking whether we are using GNU C" >&5
+echo "configure:3428: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3437: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2865: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:3456: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2902: checking for $ac_word" >&5
+echo "configure:3493: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$YACC" || YACC="yacc"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2933: checking how to run the C preprocessor" >&5
+echo "configure:3524: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2948 "configure"
+#line 3539 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2954: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3545: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2965 "configure"
+#line 3556 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3562: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2982 "configure"
+#line 3573 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3579: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3018: checking for $ac_word" >&5
+echo "configure:3609: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3051: checking for $ac_word" >&5
+echo "configure:3642: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:3085: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3676: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3093 "configure"
+#line 3684 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:3104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:3127: checking lex output file root" >&5
+echo "configure:3718: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:3148: checking whether yytext is a pointer" >&5
+echo "configure:3739: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 3160 "configure"
+#line 3751 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:3167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
fi
-ALL_LINGUAS=
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:3191: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
- echo "$ac_t""yes" 1>&6
- ISC=yes # If later tests want to check for ISC.
- cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
- if test "$GCC" = yes; then
- CC="$CC -posix"
- else
- CC="$CC -Xp"
- fi
+ALL_LINGUAS="fr tr es"
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3784: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
- ISC=
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:3212: checking for ANSI C header files" >&5
+echo "configure:3812: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3217 "configure"
+#line 3817 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3225: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3242 "configure"
+#line 3842 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3260 "configure"
+#line 3860 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 3281 "configure"
+#line 3881 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:3292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3316: checking for working const" >&5
+echo "configure:3916: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3321 "configure"
+#line 3921 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3370: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3970: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3391: checking for inline" >&5
+echo "configure:3991: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 3398 "configure"
+#line 3998 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:3405: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3431: checking for off_t" >&5
+echo "configure:4031: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3436 "configure"
+#line 4036 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3464: checking for size_t" >&5
+echo "configure:4064: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3469 "configure"
+#line 4069 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3499: checking for working alloca.h" >&5
+echo "configure:4099: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3504 "configure"
+#line 4104 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:3511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3532: checking for alloca" >&5
+echo "configure:4132: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3537 "configure"
+#line 4137 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3597: checking whether alloca needs Cray hooks" >&5
+echo "configure:4197: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3602 "configure"
+#line 4202 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3627: checking for $ac_func" >&5
+echo "configure:4227: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3632 "configure"
+#line 4232 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3682: checking stack direction for C alloca" >&5
+echo "configure:4282: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3690 "configure"
+#line 4290 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3734: checking for $ac_hdr" >&5
+echo "configure:4334: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3739 "configure"
+#line 4339 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3744: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4344: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3773: checking for $ac_func" >&5
+echo "configure:4373: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3778 "configure"
+#line 4378 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3826: checking for working mmap" >&5
+echo "configure:4426: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3834 "configure"
+#line 4434 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4002: checking for $ac_hdr" >&5
+echo "configure:4602: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4007 "configure"
+#line 4607 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4612: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4042: checking for $ac_func" >&5
+echo "configure:4642: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4047 "configure"
+#line 4647 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4670: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4099: checking for $ac_func" >&5
+echo "configure:4699: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4104 "configure"
+#line 4704 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4727: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4161: checking for LC_MESSAGES" >&5
+echo "configure:4761: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4166 "configure"
+#line 4766 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:4173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:4194: checking whether NLS is requested" >&5
+echo "configure:4794: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:4214: checking whether included gettext is requested" >&5
+echo "configure:4814: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:4233: checking for libintl.h" >&5
+echo "configure:4833: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4238 "configure"
+#line 4838 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4243: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4260: checking for gettext in libc" >&5
+echo "configure:4860: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4265 "configure"
+#line 4865 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4872: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4288: checking for bindtextdomain in -lintl" >&5
+echo "configure:4888: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4296 "configure"
+#line 4896 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:4307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4323: checking for gettext in libintl" >&5
+echo "configure:4923: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4328 "configure"
+#line 4928 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4363: checking for $ac_word" >&5
+echo "configure:4963: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4397: checking for $ac_func" >&5
+echo "configure:4997: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4402 "configure"
+#line 5002 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4452: checking for $ac_word" >&5
+echo "configure:5052: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4488: checking for $ac_word" >&5
+echo "configure:5088: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 4520 "configure"
+#line 5120 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:4528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4560: checking for $ac_word" >&5
+echo "configure:5160: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4594: checking for $ac_word" >&5
+echo "configure:5194: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4630: checking for $ac_word" >&5
+echo "configure:5230: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4720: checking for catalogs to be installed" >&5
+echo "configure:5320: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4748: checking for linux/version.h" >&5
+echo "configure:5348: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4753 "configure"
+#line 5353 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
l=
- if test -d $srcdir/po; then
+ if test -f $srcdir/po/POTFILES.in; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4821: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:5421: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
MAINT=$MAINTAINER_MODE_TRUE
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4844: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4849 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:4860: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_cygwin=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4877: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4882 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:4889: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_mingw32=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:4908: checking for executable suffix" >&5
+echo "configure:5446: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:4918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:5456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;;
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4943: checking for $ac_hdr" >&5
+echo "configure:5481: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4948 "configure"
+#line 5486 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5491: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:4983: checking whether compiling a cross-assembler" >&5
+echo "configure:5521: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4998: checking for working alloca.h" >&5
+echo "configure:5536: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5003 "configure"
+#line 5541 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:5010: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5031: checking for alloca" >&5
+echo "configure:5569: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5036 "configure"
+#line 5574 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:5064: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5096: checking whether alloca needs Cray hooks" >&5
+echo "configure:5634: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5101 "configure"
+#line 5639 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5126: checking for $ac_func" >&5
+echo "configure:5664: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5131 "configure"
+#line 5669 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5692: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5181: checking stack direction for C alloca" >&5
+echo "configure:5719: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 5189 "configure"
+#line 5727 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:5208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:5230: checking for inline" >&5
+echo "configure:5768: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 5237 "configure"
+#line 5775 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:5244: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5782: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5274: checking for $ac_func" >&5
+echo "configure:5812: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5279 "configure"
+#line 5817 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5331: checking for $ac_func" >&5
+echo "configure:5869: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5336 "configure"
+#line 5874 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
+# do we need the math library?
+case "${need_libm}" in
+yes)
+ LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6
+echo "configure:5932: checking for _mwvalidcheckl in -lmw" >&5
+ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lmw $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5940 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _mwvalidcheckl();
+
+int main() {
+_mwvalidcheckl()
+; return 0; }
+EOF
+if { (eval echo configure:5951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBM="-lmw"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
+echo "configure:5972: checking for main in -lm" >&5
+ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5980 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:5987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBM="$LIBM -lm"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ ;;
+*)
+ echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
+echo "configure:6010: checking for main in -lm" >&5
+ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6018 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:6025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBM="-lm"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ ;;
+esac
+
+
+ ;;
+esac
+
# Some non-ANSI preprocessors botch requoting inside strings. That's bad
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:5388: checking for working assert macro" >&5
+echo "configure:6056: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5393 "configure"
+#line 6061 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:5409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:5450: checking whether declaration is required for strstr" >&5
+echo "configure:6118: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5455 "configure"
+#line 6123 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:5487: checking whether declaration is required for malloc" >&5
+echo "configure:6155: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5492 "configure"
+#line 6160 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:5524: checking whether declaration is required for free" >&5
+echo "configure:6192: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5529 "configure"
+#line 6197 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5540: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:5561: checking whether declaration is required for sbrk" >&5
+echo "configure:6229: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5566 "configure"
+#line 6234 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
-echo "configure:5598: checking whether declaration is required for environ" >&5
+echo "configure:6266: checking whether declaration is required for environ" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5603 "configure"
+#line 6271 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_environ=no
else
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:5638: checking whether declaration is required for errno" >&5
+echo "configure:6306: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5643 "configure"
+#line 6311 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
; return 0; }
EOF
-if { (eval echo configure:5658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
-s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
+s%@GDBINIT@%$GDBINIT%g
s%@cgen_cpu_prefix@%$cgen_cpu_prefix%g
s%@extra_objects@%$extra_objects%g
s%@target_cpu_type@%$target_cpu_type%g
s%@atof@%$atof%g
s%@BFDLIB@%$BFDLIB%g
s%@OPCODES_LIB@%$OPCODES_LIB%g
+s%@BFDVER_H@%$BFDVER_H%g
s%@ALL_OBJ_DEPS@%$ALL_OBJ_DEPS%g
s%@YACC@%$YACC%g
s%@LEX@%$LEX%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
+s%@LIBM@%$LIBM%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then