Fix description of EM_S370.

[deliverable/binutils-gdb.git] / gas / configure

diff --git a/gas/configure b/gas/configure
index 494d85255dcd0e38e2fe4bce08b1f2c6bfc7ae3c..82c0da4f582a78cabd20d0ec128da25e847d9126 100755 (executable)
--- a/gas/configure
+++ b/gas/configure
@@ -1918,6 +1918,16 @@ using_cgen=no
 
 
 
+# If we are on a DOS filesystem, we must use gdb.ini rather than
+# .gdbinit.
+GDBINIT=".gdbinit"
+case "${host}" in
+  *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
+    GDBINIT="gdb.ini"
+    ;;
+esac
+
+
 te_file=generic
 
 # Makefile target for installing gas in $(tooldir)/bin.
@@ -1926,7 +1936,7 @@ install_tooldir=install-exec-tooldir
 canon_targets=""
 if test -n "$enable_targets" ; then
   for t in `echo $enable_targets | sed 's/,/ /g'`; do
-    result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $t 2>/dev/null`
+    result=`$ac_config_sub $t 2>/dev/null`
     if test -n "$result" ; then
       canon_targets="$canon_targets $result"
 #    else
@@ -1976,6 +1986,8 @@ for this_target in $target $canon_targets ; do
       m8*)             cpu_type=m88k ;;
       mips*el)         cpu_type=mips endian=little ;;
       mips*)           cpu_type=mips endian=big ;;
+      pjl*)            cpu_type=pj endian=little ;;
+      pj*)             cpu_type=pj endian=big ;;
       powerpcle*)      cpu_type=ppc endian=little ;;
       powerpc*)                cpu_type=ppc endian=big ;;
       rs6000*)         cpu_type=ppc ;;
@@ -2020,8 +2032,9 @@ for this_target in $target $canon_targets ; do
       arm-*-aout)                      fmt=aout ;;
       arm-*-coff | thumb-*-coff)        fmt=coff ;;
       arm-*-elf | thumb-*-elf)          fmt=elf ;;
+      arm*-*-conix*)                   fmt=elf ;;
       arm-*-linux*aout*)               fmt=aout em=linux ;;
-      arm-*-linux* | armv*-*-linux-gnu)        fmt=elf  em=linux ;;
+      arm*-*-linux-gnu*)               fmt=elf  em=linux ;;
       arm-*-netbsd*)                   fmt=aout em=nbsd bfd_gas=yes ;;
       arm-*-oabi | thumb-*-oabi)        fmt=elf ;;
       arm-epoc-pe | thumb-epoc-pe)      fmt=coff em=epoc-pe ;;
@@ -2086,8 +2099,10 @@ EOF
       i386-*-moss*)        fmt=elf ;;
       i386-*-pe)            fmt=coff em=pe ;;
       i386-*-cygwin*)       fmt=coff em=pe bfd_gas=yes ;;
+      i386-*-interix*)     fmt=coff em=interix bfd_gas=yes ;;
       i386-*-mingw32*)      fmt=coff em=pe bfd_gas=yes ;;
       i386-*-*nt*)          fmt=coff em=pe ;;
+      i386-*-vxworks*)      fmt=aout ;;
       i960-*-bout)          fmt=bout ;;
       i960-*-coff)          fmt=coff em=ic960 ;;
       i960-*-rtems*)        fmt=coff em=ic960 ;;
@@ -2152,6 +2167,7 @@ EOF
                            ;;
       mn10200-*-*)         fmt=elf bfd_gas=yes ;;
       mn10300-*-*)         fmt=elf bfd_gas=yes ;;
+      pj*)                 fmt=elf ;;
       ppc-*-pe | ppc-*-cygwin* | ppc-*-winnt*)
                            fmt=coff em=pe ;;
       ppc-*-aix*)           fmt=coff ;;
@@ -2269,6 +2285,9 @@ EOF
       *-elf)   bfd_gas=yes ;;
       *-ecoff) bfd_gas=yes ;;
       *-som)   bfd_gas=yes ;;
+    #enable bfd for coff to allow testing if a bfd target is the primary target,
+    #but not for coff as the primary target
+      i386-coff)       if test x${primary_bfd_gas} = xyes; then bfd_gas=yes; fi ;;
       *)               ;;
     esac
 
@@ -2375,11 +2394,12 @@ EOF
       mips-*-*-elf)    case "$endian" in
                        big)    emulation="mipsbelf mipslelf mipself" ;;
                        *)      emulation="mipslelf mipsbelf mipself" ;;
-      # Uncommenting the next line will turn on support for i386 COFF
-      # in any i386 ELF configuration.  This probably doesn't work
-      # correctly.
-      # i386-*-*-elf)  emulation="i386coff i386elf" ;;
                        esac ;;
+      i386-*-elf)      emulation="i386elf" ;;
+      i386-*-coff)     emulation="i386coff" ;;
+      # Uncommenting the next line will turn on support for i386 COFF
+      # in any i386 ELF configuration.
+      # i386-*-*-elf)  emulation="i386elf i386coff" ;;
     esac
 
     emulations="$emulations $emulation"
@@ -2580,13 +2600,19 @@ EOF
   obj_format=multi
 fi
 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
-  te_file=multi
-  extra_objects="$extra_objects $emfiles"
   DEFAULT_EMULATION=`set . $emulations ; echo $2`
-  cat >> confdefs.h <<\EOF
+  # e-mips* has more than one emulation per file, e-i386* has just one at the
+  # moment.  If only one emulation is specified, then don't define
+  # USE_EMULATIONS or include any of the e-files as they will only be bloat.
+  case "${obj_format}${emfiles}" in
+    multi* | *mips*)
+      te_file=multi
+      extra_objects="$extra_objects $emfiles"
+      cat >> confdefs.h <<\EOF
 #define USE_EMULATIONS 1
 EOF
-
+ ;;
+  esac
 fi
 
 cat >> confdefs.h <<EOF
@@ -2672,7 +2698,7 @@ EOF
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2676: checking for $ac_word" >&5
+echo "configure:2701: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2702,7 +2728,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2706: checking for $ac_word" >&5
+echo "configure:2731: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2753,7 +2779,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2757: checking for $ac_word" >&5
+echo "configure:2782: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2785,7 +2811,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2789: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2814: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2796,12 +2822,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2800 "configure"
+#line 2825 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2827,12 +2853,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2831: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2856: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2836: checking whether we are using GNU C" >&5
+echo "configure:2861: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2841,7 +2867,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2845: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2870: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2860,7 +2886,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2864: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2889: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2897,7 +2923,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2901: checking for $ac_word" >&5
+echo "configure:2926: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2928,7 +2954,7 @@ done
 test -n "$YACC" || YACC="yacc"
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2932: checking how to run the C preprocessor" >&5
+echo "configure:2957: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -2943,13 +2969,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2947 "configure"
+#line 2972 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2978: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2960,13 +2986,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2964 "configure"
+#line 2989 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2977,13 +3003,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2981 "configure"
+#line 3006 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -3013,7 +3039,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3017: checking for $ac_word" >&5
+echo "configure:3042: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3046,7 +3072,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex""
 # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3050: checking for $ac_word" >&5
+echo "configure:3075: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3080,7 +3106,7 @@ then
   *) ac_lib=l ;;
   esac
   echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:3084: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3109: checking for yywrap in -l$ac_lib" >&5
 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3088,7 +3114,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-l$ac_lib  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3092 "configure"
+#line 3117 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3099,7 +3125,7 @@ int main() {
 yywrap()
 ; return 0; }
 EOF
-if { (eval echo configure:3103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3122,7 +3148,7 @@ fi
 fi
 
 echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:3126: checking lex output file root" >&5
+echo "configure:3151: checking lex output file root" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3143,7 +3169,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
 
 echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:3147: checking whether yytext is a pointer" >&5
+echo "configure:3172: checking whether yytext is a pointer" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3155,14 +3181,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
 ac_save_LIBS="$LIBS"
 LIBS="$LIBS $LEXLIB"
 cat > conftest.$ac_ext <<EOF
-#line 3159 "configure"
+#line 3184 "configure"
 #include "confdefs.h"
 `cat $LEX_OUTPUT_ROOT.c`
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:3166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_prog_lex_yytext_pointer=yes
 else
@@ -3186,7 +3212,7 @@ fi
 
 ALL_LINGUAS=
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:3190: checking for POSIXized ISC" >&5
+echo "configure:3215: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -3207,12 +3233,12 @@ else
 fi
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:3211: checking for ANSI C header files" >&5
+echo "configure:3236: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3216 "configure"
+#line 3241 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -3220,7 +3246,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3224: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3249: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3237,7 +3263,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 3241 "configure"
+#line 3266 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -3255,7 +3281,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 3259 "configure"
+#line 3284 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -3276,7 +3302,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 3280 "configure"
+#line 3305 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -3287,7 +3313,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:3291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -3311,12 +3337,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3315: checking for working const" >&5
+echo "configure:3340: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3320 "configure"
+#line 3345 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3365,7 +3391,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:3369: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3394: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -3386,21 +3412,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3390: checking for inline" >&5
+echo "configure:3415: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 3397 "configure"
+#line 3422 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:3404: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -3426,12 +3452,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3430: checking for off_t" >&5
+echo "configure:3455: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3435 "configure"
+#line 3460 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3459,12 +3485,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3463: checking for size_t" >&5
+echo "configure:3488: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3468 "configure"
+#line 3493 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3494,19 +3520,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3498: checking for working alloca.h" >&5
+echo "configure:3523: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3503 "configure"
+#line 3528 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:3510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -3527,12 +3553,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3531: checking for alloca" >&5
+echo "configure:3556: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3536 "configure"
+#line 3561 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -3560,7 +3586,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:3564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -3592,12 +3618,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3596: checking whether alloca needs Cray hooks" >&5
+echo "configure:3621: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3601 "configure"
+#line 3626 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -3622,12 +3648,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3626: checking for $ac_func" >&5
+echo "configure:3651: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3631 "configure"
+#line 3656 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3650,7 +3676,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3677,7 +3703,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3681: checking stack direction for C alloca" >&5
+echo "configure:3706: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3685,7 +3711,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 3689 "configure"
+#line 3714 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -3704,7 +3730,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:3708: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -3729,17 +3755,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3733: checking for $ac_hdr" >&5
+echo "configure:3758: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3738 "configure"
+#line 3763 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3768,12 +3794,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3772: checking for $ac_func" >&5
+echo "configure:3797: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3777 "configure"
+#line 3802 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3796,7 +3822,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3821,7 +3847,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3825: checking for working mmap" >&5
+echo "configure:3850: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3829,7 +3855,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3833 "configure"
+#line 3858 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -3969,7 +3995,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3998: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3997,17 +4023,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4001: checking for $ac_hdr" >&5
+echo "configure:4026: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4006 "configure"
+#line 4031 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4011: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4036: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4037,12 +4063,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4041: checking for $ac_func" >&5
+echo "configure:4066: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4046 "configure"
+#line 4071 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4065,7 +4091,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4094,12 +4120,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4098: checking for $ac_func" >&5
+echo "configure:4123: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4103 "configure"
+#line 4128 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4122,7 +4148,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4156,19 +4182,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4160: checking for LC_MESSAGES" >&5
+echo "configure:4185: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4165 "configure"
+#line 4190 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:4172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -4189,7 +4215,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:4193: checking whether NLS is requested" >&5
+echo "configure:4218: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -4209,7 +4235,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:4213: checking whether included gettext is requested" >&5
+echo "configure:4238: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -4228,17 +4254,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:4232: checking for libintl.h" >&5
+echo "configure:4257: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4237 "configure"
+#line 4262 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4267: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4255,19 +4281,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4259: checking for gettext in libc" >&5
+echo "configure:4284: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4264 "configure"
+#line 4289 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:4271: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -4283,7 +4309,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
           if test "$gt_cv_func_gettext_libc" != "yes"; then
             echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4287: checking for bindtextdomain in -lintl" >&5
+echo "configure:4312: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4291,7 +4317,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4295 "configure"
+#line 4320 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4302,7 +4328,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:4306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4318,19 +4344,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4322: checking for gettext in libintl" >&5
+echo "configure:4347: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4327 "configure"
+#line 4352 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:4334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -4358,7 +4384,7 @@ EOF
              # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4362: checking for $ac_word" >&5
+echo "configure:4387: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4392,12 +4418,12 @@ fi
                for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4396: checking for $ac_func" >&5
+echo "configure:4421: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4401 "configure"
+#line 4426 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4420,7 +4446,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4447,7 +4473,7 @@ done
                # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4451: checking for $ac_word" >&5
+echo "configure:4476: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4483,7 +4509,7 @@ fi
                # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4487: checking for $ac_word" >&5
+echo "configure:4512: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4515,7 +4541,7 @@ else
 fi
 
                cat > conftest.$ac_ext <<EOF
-#line 4519 "configure"
+#line 4544 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4523,7 +4549,7 @@ extern int _nl_msg_cat_cntr;
                               return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:4527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
                   DATADIRNAME=share
@@ -4555,7 +4581,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4559: checking for $ac_word" >&5
+echo "configure:4584: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4589,7 +4615,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4593: checking for $ac_word" >&5
+echo "configure:4618: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4625,7 +4651,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4629: checking for $ac_word" >&5
+echo "configure:4654: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4715,7 +4741,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4719: checking for catalogs to be installed" >&5
+echo "configure:4744: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -4743,17 +4769,17 @@ echo "configure:4719: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
         ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4747: checking for linux/version.h" >&5
+echo "configure:4772: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4752 "configure"
+#line 4777 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4757: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4782: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4816,7 +4842,7 @@ fi
   
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4820: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4845: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4839,12 +4865,12 @@ fi
   
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4843: checking for Cygwin environment" >&5
+echo "configure:4868: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4848 "configure"
+#line 4873 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4855,7 +4881,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:4859: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4884: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -4872,19 +4898,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4876: checking for mingw32 environment" >&5
+echo "configure:4901: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4881 "configure"
+#line 4906 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:4888: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4913: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -4903,7 +4929,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:4907: checking for executable suffix" >&5
+echo "configure:4932: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4913,7 +4939,7 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:4917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:4942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.c | *.o | *.obj | *.ilk | *.pdb) ;;
@@ -4938,17 +4964,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4942: checking for $ac_hdr" >&5
+echo "configure:4967: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4947 "configure"
+#line 4972 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4952: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4977: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4978,7 +5004,7 @@ done
 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
 # people who are not cross-compiling but are compiling cross-assemblers.
 echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:4982: checking whether compiling a cross-assembler" >&5
+echo "configure:5007: checking whether compiling a cross-assembler" >&5
 if test "${host}" = "${target}"; then
   cross_gas=no
 else
@@ -4993,19 +5019,19 @@ echo "$ac_t""$cross_gas" 1>&6
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4997: checking for working alloca.h" >&5
+echo "configure:5022: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5002 "configure"
+#line 5027 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:5009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -5026,12 +5052,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5030: checking for alloca" >&5
+echo "configure:5055: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5035 "configure"
+#line 5060 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -5059,7 +5085,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:5063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5088: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -5091,12 +5117,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5095: checking whether alloca needs Cray hooks" >&5
+echo "configure:5120: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5100 "configure"
+#line 5125 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -5121,12 +5147,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5125: checking for $ac_func" >&5
+echo "configure:5150: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5130 "configure"
+#line 5155 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5149,7 +5175,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5176,7 +5202,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5180: checking stack direction for C alloca" >&5
+echo "configure:5205: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5184,7 +5210,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 5188 "configure"
+#line 5213 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -5203,7 +5229,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:5207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -5225,21 +5251,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:5229: checking for inline" >&5
+echo "configure:5254: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 5236 "configure"
+#line 5261 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:5243: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5268: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -5269,12 +5295,12 @@ esac
 for ac_func in unlink remove
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5273: checking for $ac_func" >&5
+echo "configure:5298: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5278 "configure"
+#line 5303 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5297,7 +5323,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5326,12 +5352,12 @@ done
 for ac_func in sbrk
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5330: checking for $ac_func" >&5
+echo "configure:5355: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5335 "configure"
+#line 5360 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5354,7 +5380,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5383,12 +5409,12 @@ done
 # enough, but on some of those systems, the assert macro relies on requoting
 # working properly!
 echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:5387: checking for working assert macro" >&5
+echo "configure:5412: checking for working assert macro" >&5
 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5392 "configure"
+#line 5417 "configure"
 #include "confdefs.h"
 #include <assert.h>
 #include <stdio.h>
@@ -5404,7 +5430,7 @@ assert (a == b
 
 ; return 0; }
 EOF
-if { (eval echo configure:5408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_assert_ok=yes
 else
@@ -5445,12 +5471,12 @@ gas_test_headers="
 "
 
 echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:5449: checking whether declaration is required for strstr" >&5
+echo "configure:5474: checking whether declaration is required for strstr" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5454 "configure"
+#line 5479 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5461,7 +5487,7 @@ x = (f) strstr;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_strstr=no
 else
@@ -5482,12 +5508,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:5486: checking whether declaration is required for malloc" >&5
+echo "configure:5511: checking whether declaration is required for malloc" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5491 "configure"
+#line 5516 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5498,7 +5524,7 @@ x = (f) malloc;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_malloc=no
 else
@@ -5519,12 +5545,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:5523: checking whether declaration is required for free" >&5
+echo "configure:5548: checking whether declaration is required for free" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5528 "configure"
+#line 5553 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5535,7 +5561,7 @@ x = (f) free;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_free=no
 else
@@ -5556,12 +5582,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:5560: checking whether declaration is required for sbrk" >&5
+echo "configure:5585: checking whether declaration is required for sbrk" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5565 "configure"
+#line 5590 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5572,7 +5598,7 @@ x = (f) sbrk;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_sbrk=no
 else
@@ -5593,12 +5619,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
-echo "configure:5597: checking whether declaration is required for environ" >&5
+echo "configure:5622: checking whether declaration is required for environ" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5602 "configure"
+#line 5627 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5609,7 +5635,7 @@ x = (f) environ;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_environ=no
 else
@@ -5633,12 +5659,12 @@ fi
 # for it?
 
 echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:5637: checking whether declaration is required for errno" >&5
+echo "configure:5662: checking whether declaration is required for errno" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5642 "configure"
+#line 5667 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_ERRNO_H
@@ -5653,7 +5679,7 @@ x = (f) errno;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_errno=no
 else
@@ -5776,7 +5802,7 @@ done
 ac_given_srcdir=$srcdir
 ac_given_INSTALL="$INSTALL"
 
-trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -5843,6 +5869,7 @@ s%@LN_S@%$LN_S%g
 s%@DLLTOOL@%$DLLTOOL%g
 s%@AS@%$AS%g
 s%@LIBTOOL@%$LIBTOOL%g
+s%@GDBINIT@%$GDBINIT%g
 s%@cgen_cpu_prefix@%$cgen_cpu_prefix%g
 s%@extra_objects@%$extra_objects%g
 s%@target_cpu_type@%$target_cpu_type%g
@@ -5924,7 +5951,7 @@ EOF
 
 cat >> $CONFIG_STATUS <<EOF
 
-CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in"}
 EOF
 cat >> $CONFIG_STATUS <<\EOF
 for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then