eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
# check for architecture variants
+ endian=
case ${cpu} in
armeb) cpu_type=arm endian=big ;;
arm*) cpu_type=arm endian=little ;;
if test ${this_target} = $target ; then
target_cpu_type=${cpu_type}
+ if test x${endian} = xbig; then
+ cat >> confdefs.h <<\EOF
+#define TARGET_BYTES_BIG_ENDIAN 1
+EOF
+
+ elif test x${endian} = xlittle; then
+ cat >> confdefs.h <<\EOF
+#define TARGET_BYTES_BIG_ENDIAN 0
+EOF
+
+ fi
elif test ${target_cpu_type} != ${cpu_type} ; then
continue
fi
- targ=${cpu_type}
generic_target=${cpu_type}-$vendor-$os
dev=no
bfd_gas=no
# assign object format
case ${generic_target} in
- a29k-*-coff) fmt=coff targ=ebmon29k ;;
- a29k-amd-udi) fmt=coff targ=ebmon29k ;;
- a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
- a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
+ a29k-*-coff) fmt=coff ;;
+ a29k-amd-udi) fmt=coff ;;
+ a29k-amd-ebmon) fmt=coff ;;
+ a29k-nyu-sym1) fmt=coff ;;
a29k-*-vxworks*) fmt=coff ;;
alpha-*-*vms*) fmt=evax ;;
arc-*-elf*) fmt=elf bfd_gas=yes ;;
# end-sanitize-arc
- arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
- arm-*-aout) fmt=aout
- case "$endian" in
- big) targ=arm-big ;;
- *) targ=arm-lit ;;
- esac
- ;;
+ arm-*-riscix*) fmt=aout em=riscix ;;
+ arm-*-aout) fmt=aout ;;
arm-*-coff | thumb-*-coff) fmt=coff ;;
arm-*-riscix*) fmt=aout ;;
- arm-*-pe) fmt=coff targ=armcoff em=pe ;;
+ arm-*-pe) fmt=coff em=pe ;;
d10v-*-*) fmt=elf bfd_gas=yes ;;
# start-sanitize-d30v
h8300-*-coff) fmt=coff ;;
- i386-ibm-aix*) fmt=coff targ=i386coff
- em=i386aix ;;
+ i386-ibm-aix*) fmt=coff em=i386aix ;;
i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
i386-*-bsd*) fmt=aout em=386bsd ;;
i386-*-netbsd0.8) fmt=aout em=386bsd ;;
i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux
- targ=i386coff ;;
+ i386-*-linux*coff*) fmt=coff em=linux ;;
i386-*-linux*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=coff targ=i386coff
- em=lynx ;;
+ i386-*-lynxos*) fmt=coff em=lynx ;;
i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
fmt=elf ;;
- i386-*-sco*elf*) fmt=elf targ=sco5 ;;
+ i386-*-sco*elf*) fmt=elf
+ if test ${this_target} = $target; then
+ cat >> confdefs.h <<\EOF
+#define SCO_ELF 1
+EOF
+
+ fi
+ ;;
i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
- fmt=coff targ=i386coff ;;
+ fmt=coff ;;
i386-*-vsta) fmt=aout ;;
i386-*-msdosdjgpp* | i386-*-go32*)
- fmt=coff targ=coffgo32 em=go32;;
- i386-*-rtems*) fmt=coff targ=i386coff ;;
+ fmt=coff em=go32;;
+ i386-*-rtems*) fmt=coff ;;
i386-*-gnu*) fmt=elf ;;
i386-*-mach*)
fmt=aout em=mach bfd_gas=yes ;;
i386-*-msdos*) fmt=aout ;;
i386-*-moss*) fmt=elf ;;
- i386-*-pe) fmt=coff targ=i386coff em=pe ;;
- i386-*-cygwin32) fmt=coff targ=i386coff em=pe bfd_gas=yes ;;
- i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
+ i386-*-pe) fmt=coff em=pe ;;
+ i386-*-cygwin32) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-*nt) fmt=coff em=pe ;;
i960-*-bout) fmt=bout ;;
- i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
- i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
+ i960-*-coff) fmt=coff em=ic960 ;;
+ i960-*-rtems*) fmt=coff em=ic960 ;;
i960-*-nindy*) fmt=bout ;;
i960-*-vxworks4*) fmt=bout ;;
i960-*-vxworks5.0) fmt=bout ;;
- i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
+ i960-*-vxworks5.*) fmt=coff em=ic960 ;;
i960-*-vxworks*) fmt=bout ;;
m32r-*-*) fmt=elf bfd_gas=yes ;;
m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
fmt=aout em=sun3 ;;
- m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
- m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
- m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
+ m68k-motorola-sysv*) fmt=coff em=delta ;;
+ m68k-bull-sysv3*) fmt=coff em=dpx2 ;;
+ m68k-apollo-*) fmt=coff em=apollo ;;
m68k-*-sysv4*) # must be before -sysv*
fmt=elf em=svr4 ;;
m68k-*-elf*) fmt=elf ;;
m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
- fmt=coff targ=m68kcoff ;;
+ fmt=coff ;;
m68k-*-hpux*) fmt=hp300 em=hp300 ;;
m68k-*-linux*aout*) fmt=aout em=linux ;;
m68k-*-linux*) fmt=elf em=linux ;;
- m68k-*-lynxos*) fmt=coff targ=m68kcoff
- em=lynx ;;
+ m68k-*-lynxos*) fmt=coff em=lynx ;;
m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
+ m68k-apple-aux*) fmt=coff em=aux ;;
m68k-*-psos*) fmt=elf em=psos;;
- m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
- m88k-*-coff*) fmt=coff targ=m88kcoff ;;
+ m88k-motorola-sysv3*) fmt=coff em=delt88 ;;
+ m88k-*-coff*) fmt=coff ;;
# don't change em like *-*-bsd does
- mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
- mips-dec-openbsd*) fmt=elf targ=mips-lit endian=little ;;
- mips-dec-bsd*) fmt=aout targ=mips-lit ;;
- mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
+ mips-dec-netbsd*) fmt=elf endian=little ;;
+ mips-dec-openbsd*) fmt=elf endian=little ;;
+ mips-dec-bsd*) fmt=aout ;;
+ mips-sony-bsd*) fmt=ecoff ;;
mips-*-bsd*) { echo "configure: error: Unknown vendor for mips-bsd configuration." 1>&2; exit 1; } ;;
- mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
- mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
- mips-*-ecoff*) fmt=ecoff
- case "$endian" in
- big) targ=mips-big ;;
- *) targ=mips-lit ;;
- esac
- ;;
- mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
- mips-*-irix6*) fmt=elf targ=mips-big ;;
- mips-*-irix5*) fmt=elf targ=mips-big ;;
- mips-*-irix*) fmt=ecoff targ=mips-big ;;
- mips-*-lnews*) fmt=ecoff targ=mips-lit em=lnews ;;
- mips-*-riscos*) fmt=ecoff targ=mips-big ;;
- mips-*-sysv*) fmt=ecoff targ=mips-big ;;
+ mips-*-ultrix*) fmt=ecoff endian=little ;;
+ mips-*-osf*) fmt=ecoff endian=little ;;
+ mips-*-ecoff*) fmt=ecoff ;;
+ mips-*-ecoff*) fmt=ecoff ;;
+ mips-*-irix6*) fmt=elf ;;
+ mips-*-irix5*) fmt=elf ;;
+ mips-*-irix*) fmt=ecoff ;;
+ mips-*-lnews*) fmt=ecoff em=lnews ;;
+ mips-*-riscos*) fmt=ecoff ;;
+ mips-*-sysv*) fmt=ecoff ;;
mips-*-elf* | mips-*-rtems* | mips-*-linux* | mips-*-gnu* | mips-*-openbsd*)
- fmt=elf
- case "$endian" in
- big) targ=mips-big ;;
- *) targ=mips-lit ;;
- esac
- ;;
+ fmt=elf ;;
mn10200-*-*) fmt=elf bfd_gas=yes ;;
mn10300-*-*) fmt=elf bfd_gas=yes ;;
ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
- fmt=coff em=pe
- case "$endian" in
- big) targ=ppc-big ;;
- *) targ=ppc-lit ;;
- esac
- ;;
+ fmt=coff em=pe ;;
ppc-*-aix*) fmt=coff ;;
ppc-*-beos*) fmt=coff ;;
ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
- fmt=elf
- case "$endian" in
- big) targ=ppc-big ;;
- *) targ=ppc-lit ;;
- esac
- ;;
+ fmt=elf ;;
ppc-*-linux*) fmt=elf
case "$endian" in
- big) targ=ppc-big ;;
+ big) ;;
*) { echo "configure: error: Linux must be configured big endian" 1>&2; exit 1; } ;;
esac
;;
ppc-*-solaris*) fmt=elf
- case "$endian" in
- big) { echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; } ;;
- *) targ=ppc-sol ;;
- esac
- ;;
- ppc-*-rtems*)
- fmt=elf
- case "$endian" in
- big) targ=ppc-big ;;
- *) targ=ppc-lit ;;
- esac
+ if test ${this_target} = $target; then
+ cat >> confdefs.h <<\EOF
+#define TARGET_SOLARIS_COMMENT 1
+EOF
+
+ fi
+ if test x${endian} = xbig; then
+ { echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; }
+ fi
;;
+ ppc-*-rtems*) fmt=elf ;;
ppc-*-macos* | ppc-*-mpw*)
fmt=coff em=macos ;;
ppc-*-netware*) fmt=elf em=ppcnw ;;
sparc-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
# start-sanitize-tic80
- tic80-*-*) fmt=coff targ=tic80coff;;
+ tic80-*-*) fmt=coff ;;
# end-sanitize-tic80
-# start-sanitize-v850
v850-*-*) fmt=elf bfd_gas=yes ;;
-
-# end-sanitize-v850
+# start-sanitize-v850e
+ v850e-*-*) fmt=elf bfd_gas=yes
+ target_cpu_type=v850 ;;
+# end-sanitize-v850e
+# start-sanitize-v850eq
+ v850eq-*-*) fmt=elf bfd_gas=yes
+ target_cpu_type=v850 ;;
+# end-sanitize-v850eq
vax-*-bsd* | vax-*-ultrix*)
fmt=aout ;;
vax-*-vms) fmt=vms ;;
if test $this_target = $target ; then
primary_bfd_gas=$bfd_gas
obj_format=$fmt
- gas_target=$targ
te_file=$em
if test $bfd_gas = no ; then
{ echo "configure: error: GAS does not have support for object file format ${obj_format}" 1>&2; exit 1; }
fi
-# and target makefile frag
-
-target_frag=${srcdir}/config/${gas_target}.mt
-if test ! -r ${target_frag}; then
- target_frag=/dev/null # ick! but subst_file can't be conditionalized
-fi
-
-
case ${user_bfd_gas}-${primary_bfd_gas} in
yes-yes | no-no)
# We didn't override user's choice.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1964: checking for $ac_word" >&5
+echo "configure:1943: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1993: checking for $ac_word" >&5
+echo "configure:1972: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2041: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2020: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2051 "configure"
+#line 2030 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2075: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2054: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2080: checking whether we are using GNU C" >&5
+echo "configure:2059: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2089: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2104: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2083: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2142: checking for a BSD compatible install" >&5
+echo "configure:2121: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2197: checking for $ac_word" >&5
+echo "configure:2176: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2229: checking for $ac_word" >&5
+echo "configure:2208: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2262: checking for yywrap in -l$ac_lib" >&5
+echo "configure:2241: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2270 "configure"
+#line 2249 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:2281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2304: checking how to run the C preprocessor" >&5
+echo "configure:2283: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2319 "configure"
+#line 2298 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2304: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2336 "configure"
+#line 2315 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2342: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2321: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2365: checking lex output file root" >&5
+echo "configure:2344: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2386: checking whether yytext is a pointer" >&5
+echo "configure:2365: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2398 "configure"
+#line 2377 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2428: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2407: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
-echo "configure:2446: checking for Cygwin32 environment" >&5
+echo "configure:2425: checking for Cygwin32 environment" >&5
if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2451 "configure"
+#line 2430 "configure"
#include "confdefs.h"
int main() {
int main () { return __CYGWIN32__; }
; return 0; }
EOF
-if { (eval echo configure:2458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_cygwin32=yes
else
test "$am_cv_cygwin32" = yes && CYGWIN32=yes
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2476: checking for executable suffix" >&5
+echo "configure:2455: checking for executable suffix" >&5
if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2504: checking for $ac_hdr" >&5
+echo "configure:2483: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2509 "configure"
+#line 2488 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2514: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2493: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:2544: checking whether compiling a cross-assembler" >&5
+echo "configure:2523: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2559: checking for working alloca.h" >&5
+echo "configure:2538: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2564 "configure"
+#line 2543 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2592: checking for alloca" >&5
+echo "configure:2571: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2597 "configure"
+#line 2576 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2652: checking whether alloca needs Cray hooks" >&5
+echo "configure:2631: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2657 "configure"
+#line 2636 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2682: checking for $ac_func" >&5
+echo "configure:2661: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2687 "configure"
+#line 2666 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2737: checking stack direction for C alloca" >&5
+echo "configure:2716: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2745 "configure"
+#line 2724 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2786: checking for inline" >&5
+echo "configure:2765: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2793 "configure"
+#line 2772 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2800: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2830: checking for $ac_func" >&5
+echo "configure:2809: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2835 "configure"
+#line 2814 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2887: checking for $ac_func" >&5
+echo "configure:2866: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2892 "configure"
+#line 2871 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2894: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:2944: checking for working assert macro" >&5
+echo "configure:2923: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2949 "configure"
+#line 2928 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:2965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:3006: checking whether declaration is required for strstr" >&5
+echo "configure:2985: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3011 "configure"
+#line 2990 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:3043: checking whether declaration is required for malloc" >&5
+echo "configure:3022: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3048 "configure"
+#line 3027 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:3080: checking whether declaration is required for free" >&5
+echo "configure:3059: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3085 "configure"
+#line 3064 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:3117: checking whether declaration is required for sbrk" >&5
+echo "configure:3096: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3122 "configure"
+#line 3101 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:3157: checking whether declaration is required for errno" >&5
+echo "configure:3136: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3162 "configure"
+#line 3141 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
; return 0; }
EOF
-if { (eval echo configure:3177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
s%@LD@%$LD%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
-/@target_frag@/r $target_frag
-s%@target_frag@%%g
s%@extra_objects@%$extra_objects%g
s%@target_cpu_type@%$target_cpu_type%g
s%@obj_format@%$obj_format%g
projects / deliverable / binutils-gdb.git / blobdiff