--enable-static=PKGS build static libraries default=yes
--enable-fast-install=PKGS optimize for fast installation default=yes
--disable-libtool-lock avoid locking (might break parallel builds)
- --enable-bfd-assembler use BFD back end for writing object files
targets alternative target configurations besides the primary
--enable-commonbfdlib build shared BFD/opcodes/libiberty library
--enable-werror treat compile warnings as errors
;;
darwin* | rhapsody*)
+ # this will be overwritten by pass_all, but leave it in just in case
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
lt_cv_file_magic_cmd='/usr/bin/file -L'
case "$host_os" in
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
;;
esac
+ lt_cv_deplibs_check_method=pass_all
;;
freebsd* | kfreebsd*-gnu)
# This must be Linux ELF.
linux-gnu*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ lt_cv_deplibs_check_method=pass_all
;;
netbsd* | knetbsd*-gnu)
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+ esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len" ; then
+ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+ echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 3815 "configure"' > conftest.$ac_ext
+ echo '#line 3870 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
rm -rf conftest*
;;
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
-user_bfd_gas=
-# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
-if test "${enable_bfd_assembler+set}" = set; then
- enableval="$enable_bfd_assembler"
- case "${enableval}" in
- yes) need_bfd=yes user_bfd_gas=yes ;;
- no) user_bfd_gas=no ;;
- *) { { echo "$as_me:$LINENO: error: bad value ${enableval} given for bfd-assembler option" >&5
-echo "$as_me: error: bad value ${enableval} given for bfd-assembler option" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-fi; # Check whether --enable-targets or --disable-targets was given.
+# Check whether --enable-targets or --disable-targets was given.
if test "${enable_targets+set}" = set; then
enableval="$enable_targets"
case "${enableval}" in
using_cgen=no
-WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
# Check whether --enable-werror or --disable-werror was given.
if test "${enable_werror+set}" = set; then
NO_WERROR=
if test "${ERROR_ON_WARNING}" = yes ; then
- WARN_CFLAGS="$WARN_CFLAGS -Werror"
+ GCC_WARN_CFLAGS="$GCC_WARN_CFLAGS -Werror"
NO_WERROR="-Wno-error"
fi
+if test "${GCC}" = yes ; then
+ WARN_CFLAGS="${GCC_WARN_CFLAGS}"
+fi
+
# Check whether --enable-build-warnings or --disable-build-warnings was given.
if test "${enable_build_warnings+set}" = set; then
enableval="$enable_build_warnings"
case "${enableval}" in
- yes) ;;
- no) WARN_CFLAGS="-w";;
+ yes) WARN_CFLAGS="${GCC_WARN_CFLAGS}";;
+ no) if test "${GCC}" = yes ; then
+ WARN_CFLAGS="-w"
+ fi;;
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- WARN_CFLAGS="${WARN_CFLAGS} ${t}";;
+ WARN_CFLAGS="${GCC_WARN_CFLAGS} ${t}";;
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- WARN_CFLAGS="${t} ${WARN_CFLAGS}";;
+ WARN_CFLAGS="${t} ${GCC_WARN_CFLAGS}";;
*) WARN_CFLAGS=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
fi;
*opcodes*) shared_opcodes=true ;;
*) shared_opcodes=false ;;
esac
- if test "${shared_opcodes}" = "true"; then
- # A shared libopcodes must be linked against libbfd.
- need_bfd=yes
- fi
;;
esac
# Any other special object files needed ?
case ${cpu_type} in
+
+ bfin)
+ echo ${extra_objects} | grep -s "bfin-parse.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects bfin-parse.o"
+ fi
+
+ echo ${extra_objects} | grep -s "bfin-lex.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects bfin-lex.o"
+ fi
+ ;;
+
fr30 | ip2k | iq2000 | m32r | openrisc)
using_cgen=yes
;;
+ m32c)
+ using_cgen=yes
+ ;;
frv)
using_cgen=yes
;;
fi
;;
- ms1)
+ mt)
using_cgen=yes
;;
using_cgen=yes
;;
+ xc16x)
+ using_cgen=yes
+ ;;
+
xtensa)
echo ${extra_objects} | grep -s "xtensa-relax.o"
if test $? -ne 0 ; then
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
- primary_bfd_gas=$bfd_gas
obj_format=$fmt
te_file=$em
-
- if test $bfd_gas = no ; then
- # Can't support other configurations this way.
- break
- fi
- elif test $bfd_gas = no ; then
- # Can't support this configuration.
- break
fi
# From target name and format, produce a list of supported emulations.
{ (exit 1); exit 1; }; }
fi
-case ${user_bfd_gas}-${primary_bfd_gas} in
- yes-yes | no-no)
- # We didn't override user's choice.
- ;;
- no-yes)
- { echo "$as_me:$LINENO: WARNING: Use of BFD is required for ${target}; overriding config options." >&5
-echo "$as_me: WARNING: Use of BFD is required for ${target}; overriding config options." >&2;}
- ;;
- no-preferred)
- primary_bfd_gas=no
- ;;
- *-preferred)
- primary_bfd_gas=yes
- ;;
- yes-*)
- primary_bfd_gas=yes
- ;;
- -*)
- # User specified nothing.
- ;;
-esac
-
# Some COFF configurations want these random other flags set.
case ${obj_format} in
coff)
esac
# Getting this done right is going to be a bitch. Each configuration specified
-# with --enable-targets=... should be checked for environment, format, cpu, and
-# bfd_gas setting.
+# with --enable-targets=... should be checked for environment, format, cpu
+# setting.
#
# For each configuration, the necessary object file support code must be linked
# in. This might be only one, it might be up to four. The necessary emulation
#define OBJ_MAYBE_GENERIC 1
_ACEOF
;;
- hp300)
-cat >>confdefs.h <<\_ACEOF
-#define OBJ_MAYBE_HP300 1
-_ACEOF
- ;;
ieee)
cat >>confdefs.h <<\_ACEOF
#define OBJ_MAYBE_IEEE 1
_ACEOF
-case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
- yes-*-coff) need_bfd=yes ;;
- no-*-coff) need_bfd=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define MANY_SEGMENTS 1
-_ACEOF
- ;;
-esac
-
reject_dev_configs=yes
case ${reject_dev_configs}-${dev} in
-case "${primary_bfd_gas}" in
- yes)
-cat >>confdefs.h <<\_ACEOF
-#define BFD_ASSEMBLER 1
-_ACEOF
-
- need_bfd=yes ;;
-esac
-
# do we need the opcodes library?
case "${need_opcodes}" in
yes)
;;
esac
-case "${need_bfd}" in
-yes)
- BFDLIB=../bfd/libbfd.la
- BFDVER_H=../bfd/bfdver.h
- ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
- ;;
-esac
+BFDLIB=../bfd/libbfd.la
+BFDVER_H=../bfd/bfdver.h
+ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
yes)
LIBM=
case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
# These system don't have libm
+ # on darwin the libm is a symbolic link to libSystem.dylib
;;
*-ncr-sysv4.3*)
echo "$as_me:$LINENO: checking for _mwvalidcheckl in -lmw" >&5
fi
+echo "$as_me:$LINENO: checking whether vsnprintf is declared" >&5
+echo $ECHO_N "checking whether vsnprintf is declared... $ECHO_C" >&6
+if test "${ac_cv_have_decl_vsnprintf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+#ifndef vsnprintf
+ char *p = (char *) vsnprintf;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_have_decl_vsnprintf=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_have_decl_vsnprintf=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_vsnprintf" >&5
+echo "${ECHO_T}$ac_cv_have_decl_vsnprintf" >&6
+if test $ac_cv_have_decl_vsnprintf = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_VSNPRINTF 1
+_ACEOF
+
+
+else
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_VSNPRINTF 0
+_ACEOF
+
+
+fi
+
+
+
ac_config_files="$ac_config_files Makefile doc/Makefile po/Makefile.in:po/Make-in"