gas/testsuite/

[deliverable/binutils-gdb.git] / gas / configure.in

diff --git a/gas/configure.in b/gas/configure.in
index 011e886db40ddd87f98e9832c8580656c6bd7b82..20a64d501b507f928759ffe7cee7407d231de11e 100644 (file)
--- a/gas/configure.in
+++ b/gas/configure.in
@@ -17,14 +17,14 @@ AC_CANONICAL_TARGET
 AC_ISC_POSIX
 
 changequote(,)dnl
-BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[        ]*\([^  ]*\)[   ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+BFD_VERSION=`${srcdir}/../bfd/configure --version | sed -n -e '1s,.* ,,p'`
 changequote([,])dnl
 AM_INIT_AUTOMAKE(gas, ${BFD_VERSION})
 
 AC_PROG_CC
 AC_GNU_SOURCE
 AC_USE_SYSTEM_EXTENSIONS
-AC_SYS_LARGEFILE
+ACX_LARGEFILE
 
 LT_INIT
 
@@ -58,6 +58,15 @@ AM_BINUTILS_WARNINGS
 # Generate a header file
 AC_CONFIG_HEADERS(config.h:config.in)
 
+# PR 14072
+AH_VERBATIM([00_CONFIG_H_CHECK],
+[/* Check that config.h is #included before system headers
+   (this works only for glibc, but that should be enough).  */
+#if defined(__GLIBC__) && !defined(__CONFIG_H__)
+#  error config.h must be #included before system headers
+#endif
+#define __CONFIG_H__ 1])
+
 # If we are on a DOS filesystem, we must use gdb.ini rather than
 # .gdbinit.
 case "${host}" in
@@ -137,6 +146,9 @@ for this_target in $target $canon_targets ; do
        AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress)
        ;;
 
+      microblaze*)
+        ;;
+
       mips-sony-bsd*)
        ;;
       mips-*-bsd*)
@@ -247,10 +259,10 @@ changequote([,])dnl
        esac
        # Decide which ABI to target by default.
        case ${target} in
-         mips64*-linux* | mips-sgi-irix6*)
+         mips64*-linux* | mips-sgi-irix6* | mips64*-freebsd* | mips64*-kfreebsd*-gnu)
            mips_default_abi=N32_ABI
            ;;
-         mips*-linux*)
+         mips*-linux* | mips*-freebsd* | mips*-kfreebsd*-gnu)
            mips_default_abi=O32_ABI
            ;;
          mips64*-openbsd*)
@@ -296,13 +308,13 @@ changequote([,])dnl
           extra_objects="$extra_objects bfin-parse.o"
         fi
 
-        echo ${extra_objects} | grep -s "bfin-lex.o"
+        echo ${extra_objects} | grep -s "bfin-lex-wrapper.o"
         if test $? -ne 0 ; then
-          extra_objects="$extra_objects bfin-lex.o"
+          extra_objects="$extra_objects bfin-lex-wrapper.o"
         fi
         ;;
 
-      fr30 | ip2k | iq2000 | lm32 | m32r | openrisc)
+      epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | openrisc)
        using_cgen=yes
        ;;
 
@@ -329,9 +341,9 @@ changequote([,])dnl
          extra_objects="$extra_objects itbl-parse.o"
        fi
 
-       echo ${extra_objects} | grep -s "itbl-lex.o"
+       echo ${extra_objects} | grep -s "itbl-lex-wrapper.o"
        if test $? -ne 0 ; then
-         extra_objects="$extra_objects itbl-lex.o"
+         extra_objects="$extra_objects itbl-lex-wrapper.o"
        fi
 
        echo ${extra_objects} | grep -s "itbl-ops.o"
@@ -350,6 +362,20 @@ changequote([,])dnl
        fi
        ;;
 
+      rl78)
+        echo ${extra_objects} | grep -s "rl78-parse.o"
+        if test $? -ne 0 ; then
+          extra_objects="$extra_objects rl78-parse.o"
+        fi
+       ;;
+
+      rx)
+        echo ${extra_objects} | grep -s "rx-parse.o"
+        if test $? -ne 0 ; then
+          extra_objects="$extra_objects rx-parse.o"
+        fi
+       ;;
+
       xstormy16)
        using_cgen=yes
        ;;
@@ -383,11 +409,16 @@ changequote([,])dnl
       te_file=$em
     fi
 
+   case ${te_file} in
+      vms) extra_objects="$extra_objects te-vms.o" ;;
+   esac
+
 # From target name and format, produce a list of supported emulations.
 
     case ${generic_target}-${fmt} in
       mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
-      mips*-*-linux*-*) case "$endian" in
+      mips*-*-linux*-* | mips*-*-freebsd* | mips*-*-kfreebsd*-gnu)
+                       case "$endian" in
                        big)    emulation="mipsbelf mipslelf mipself" ;;
                        *)      emulation="mipslelf mipsbelf mipself" ;;
                        esac ;;
@@ -452,6 +483,11 @@ if test ${all_targets} = "yes"; then
   esac
 fi
 
+# PE code has way too many macros tweaking behaviour
+case ${te_file} in
+  pe*) emulations="" ;;
+esac
+
 # Assign floating point type.  Most processors with FP support
 # IEEE FP.  On those that don't support FP at all, usually IEEE
 # is emulated.
@@ -598,7 +634,7 @@ AC_DEFINE_UNQUOTED(TARGET_OS,               "${target_os}",    [Target OS.])
 AC_PROG_YACC
 AM_PROG_LEX
 
-ALL_LINGUAS="fr tr es rw id"
+ALL_LINGUAS="fr tr es rw id ru fi ja"
 ZW_GNU_GETTEXT_SISTER_DIR
 AM_PO_SUBDIRS
 
@@ -606,7 +642,8 @@ AM_MAINTAINER_MODE
 AM_CONDITIONAL(GENINSRC_NEVER, false)
 AC_EXEEXT
 
-AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h limits.h)
+AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h errno.h sys/types.h limits.h locale.h time.h sys/stat.h)
+ACX_HEADER_STRING
 
 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
 # people who are not cross-compiling but are compiling cross-assemblers.
@@ -626,9 +663,9 @@ AC_C_INLINE
 
 # VMS doesn't have unlink.
 AC_CHECK_FUNCS(unlink remove, break)
+AC_CHECK_FUNCS(sbrk setlocale)
 
-# Some systems don't have sbrk().
-AC_CHECK_FUNCS(sbrk)
+AM_LC_MESSAGES
 
 # do we need the math library?
 case "${need_libm}" in
@@ -690,10 +727,25 @@ GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
 GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
 GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
 
-AC_CHECK_DECLS([vsnprintf])
+AC_CHECK_DECLS([free, getenv, malloc, mempcpy, realloc, stpcpy, strstr, vsnprintf])
 
 BFD_BINARY_FOPEN
 
+# Link in zlib if we can.  This allows us to write compressed debug sections.
+AM_ZLIB
+
+# Support for VMS timestamps via cross compile
+
+if test "$ac_cv_header_time_h" = yes; then
+  GAS_HAVE_TIME_TYPE_MEMBER(struct tm, tm_gmtoff)
+fi
+
+if test "$ac_cv_header_sys_stat_h" = yes; then
+    GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_sec)
+    GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_nsec)
+fi
+
+
 dnl Required for html, pdf, install-pdf and install-html targets.
 AC_SUBST(datarootdir)
 AC_SUBST(docdir)