\input texinfo @c -*-Texinfo-*-
@c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-@c 2001, 2002, 2003, 2004
+@c 2001, 2002, 2003, 2004, 2005
@c Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@ifset H8/300
@set H8
@end ifset
-@ifset H8/500
-@set H8
-@end ifset
@ifset SH
@set H8
@end ifset
@smallexample
@c man begin SYNOPSIS
@value{AS} [@b{-a}[@b{cdhlns}][=@var{file}]] [@b{--alternate}] [@b{-D}]
- [@b{--defsym} @var{sym}=@var{val}] [@b{-f}] [@b{-g}] [@b{--gstabs}] [@b{--gstabs+}]
- [@b{--gdwarf-2}] [@b{--help}] [@b{-I} @var{dir}] [@b{-J}] [@b{-K}] [@b{-L}]
- [@b{--listing-lhs-width}=@var{NUM}] [@b{--listing-lhs-width2}=@var{NUM}]
- [@b{--listing-rhs-width}=@var{NUM}] [@b{--listing-cont-lines}=@var{NUM}]
- [@b{--keep-locals}] [@b{-o} @var{objfile}] [@b{-R}] [@b{--statistics}] [@b{-v}]
- [@b{-version}] [@b{--version}] [@b{-W}] [@b{--warn}] [@b{--fatal-warnings}]
- [@b{-w}] [@b{-x}] [@b{-Z}] [@b{--target-help}] [@var{target-options}]
- [@b{--}|@var{files} @dots{}]
+ [@b{--defsym} @var{sym}=@var{val}] [@b{-f}] [@b{-g}] [@b{--gstabs}]
+ [@b{--gstabs+}] [@b{--gdwarf-2}] [@b{--help}] [@b{-I} @var{dir}] [@b{-J}]
+ [@b{-K}] [@b{-L}] [@b{--listing-lhs-width}=@var{NUM}]
+ [@b{--listing-lhs-width2}=@var{NUM}] [@b{--listing-rhs-width}=@var{NUM}]
+ [@b{--listing-cont-lines}=@var{NUM}] [@b{--keep-locals}] [@b{-o}
+ @var{objfile}] [@b{-R}] [@b{--reduce-memory-overheads}] [@b{--statistics}]
+ [@b{-v}] [@b{-version}] [@b{--version}] [@b{-W}] [@b{--warn}]
+ [@b{--fatal-warnings}] [@b{-w}] [@b{-x}] [@b{-Z}] [@b{--target-help}]
+ [@var{target-options}] [@b{--}|@var{files} @dots{}]
@c
@c Target dependent options are listed below. Keep the list sorted.
@c Add an empty line for separation.
-@ifset A29K
-@c am29k has no machine-dependent assembler options
-@end ifset
@ifset ALPHA
@emph{Target Alpha options:}
[@b{-EB}|@b{-EL}]
[@b{-mapcs-32}|@b{-mapcs-26}|@b{-mapcs-float}|
@b{-mapcs-reentrant}]
- [@b{-mthumb-interwork}] [@b{-moabi}] [@b{-k}]
+ [@b{-mthumb-interwork}] [@b{-k}]
@end ifset
@ifset CRIS
[@b{--underscore} | @b{--no-underscore}]
[@b{--pic}] [@b{-N}]
[@b{--emulation=criself} | @b{--emulation=crisaout}]
+ [@b{--march=v0_v10} | @b{--march=v10} | @b{--march=v32} | @b{--march=common_v10_v32}]
@c Deprecated -- deliberately not documented.
@c [@b{-h}] [@b{-H}]
@end ifset
[@b{-mconstant-gp}|@b{-mauto-pic}]
[@b{-milp32}|@b{-milp64}|@b{-mlp64}|@b{-mp64}]
[@b{-mle}|@b{mbe}]
+ [@b{-mtune=itanium1}|@b{-mtune=itanium2}]
+ [@b{-munwind-check=warning}|@b{-munwind-check=error}]
+ [@b{-mhint.b=ok}|@b{-mhint.b=warning}|@b{-mhint.b=error}]
[@b{-x}|@b{-xexplicit}] [@b{-xauto}] [@b{-xdebug}]
@end ifset
@ifset IP2K
@emph{Target IP2K options:}
[@b{-mip2022}|@b{-mip2022ext}]
@end ifset
+@ifset M32C
+
+@emph{Target M32C options:}
+ [@b{-m32c}|@b{-m16c}]
+@end ifset
@ifset M32R
@emph{Target M32R options:}
[@b{-mips16}] [@b{-no-mips16}]
[@b{-mips3d}] [@b{-no-mips3d}]
[@b{-mdmx}] [@b{-no-mdmx}]
+ [@b{-mdsp}] [@b{-mno-dsp}]
+ [@b{-mmt}] [@b{-mno-mt}]
[@b{-mdebug}] [@b{-no-mdebug}]
[@b{-mpdr}] [@b{-mno-pdr}]
@end ifset
[@b{-mcpu=54[123589]}|@b{-mcpu=54[56]lp}] [@b{-mfar-mode}|@b{-mf}]
[@b{-merrors-to-file} @var{<filename>}|@b{-me} @var{<filename>}]
@end ifset
+
+@ifset Z80
+
+@emph{Target Z80 options:}
+ [@b{-z80}] [@b{-r800}]
+ [@b{ -ignore-undocumented-instructions}] [@b{-Wnud}]
+ [@b{ -ignore-unportable-instructions}] [@b{-Wnup}]
+ [@b{ -warn-undocumented-instructions}] [@b{-Wud}]
+ [@b{ -warn-unportable-instructions}] [@b{-Wup}]
+ [@b{ -forbid-undocumented-instructions}] [@b{-Fud}]
+ [@b{ -forbid-unportable-instructions}] [@b{-Fup}]
+@end ifset
+
@ifset Z8000
@c Z8000 has no machine-dependent assembler options
@end ifset
@ifset XTENSA
@emph{Target Xtensa options:}
- [@b{--[no-]density}] [@b{--[no-]relax}] [@b{--[no-]generics}]
- [@b{--[no-]text-section-literals}]
+ [@b{--[no-]text-section-literals}] [@b{--[no-]absolute-literals}]
[@b{--[no-]target-align}] [@b{--[no-]longcalls}]
+ [@b{--[no-]transform}]
+ [@b{--rename-section} @var{oldname}=@var{newname}]
@end ifset
@c man end
@end smallexample
@item -R
Fold the data section into the text section.
+@kindex --hash-size=@var{number}
+Set the default size of GAS's hash tables to a prime number close to
+@var{number}. Increasing this value can reduce the length of time it takes the
+assembler to perform its tasks, at the expense of increasing the assembler's
+memory requirements. Similarly reducing this value can reduce the memory
+requirements at the expense of speed.
+
+@item --reduce-memory-overheads
+This option reduces GAS's memory requirements, at the expense of making the
+assembly processes slower. Currently this switch is a synonym for
+@samp{--hash-size=4051}, but in the future it may have other effects as well.
+
@item --statistics
Print the maximum space (in bytes) and total time (in seconds) used by
assembly.
Select which floating point ABI is in use.
@item -mthumb
Enable Thumb only instruction decoding.
-@item -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant | -moabi
+@item -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant
Select which procedure calling convention is in use.
@item -EB | -EL
Select either big-endian (-EB) or little-endian (-EL) output.
@end table
@end ifset
+@ifset M32C
+The following options are available when @value{AS} is configured for the
+Renesas M32C and M16C processors.
+
+@table @gcctabopt
+
+@item -m32c
+Assemble M32C instructions.
+
+@item -m16c
+Assemble M16C instructions (the default).
+
+@end table
+@end ifset
+
@ifset M32R
The following options are available when @value{AS} is configured for the
Renesas M32R (formerly Mitsubishi M32R) series.
This tells the assembler to accept MDMX instructions.
@samp{-no-mdmx} turns off this option.
+@item -mdsp
+@itemx -mno-dsp
+Generate code for the DSP Application Specific Extension.
+This tells the assembler to accept DSP instructions.
+@samp{-mno-dsp} turns off this option.
+
+@item -mmt
+@itemx -mno-mt
+Generate code for the MT Application Specific Extension.
+This tells the assembler to accept MT instructions.
+@samp{-mno-mt} turns off this option.
+
@item --construct-floats
@itemx --no-construct-floats
The @samp{--no-construct-floats} option disables the construction of
an Xtensa processor.
@table @gcctabopt
-@item --density | --no-density
-Enable or disable use of instructions from the Xtensa code density
-option. This is enabled by default when the Xtensa processor supports
-the code density option.
-
-@item --relax | --no-relax
-Enable or disable instruction relaxation. This is enabled by default.
-Note: In the current implementation, these options also control whether
-assembler optimizations are performed, making these options equivalent
-to @option{--generics} and @option{--no-generics}.
-
-@item --generics | --no-generics
-Enable or disable all assembler transformations of Xtensa instructions.
-The default is @option{--generics};
-@option{--no-generics} should be used only in the rare cases when the
-instructions must be exactly as specified in the assembly source.
-
@item --text-section-literals | --no-text-section-literals
With @option{--text-@-section-@-literals}, literal pools are interspersed
in the text section. The default is
@option{--no-@-text-@-section-@-literals}, which places literals in a
-separate section in the output file.
+separate section in the output file. These options only affect literals
+referenced via PC-relative @code{L32R} instructions; literals for
+absolute mode @code{L32R} instructions are handled separately.
+
+@item --absolute-literals | --no-absolute-literals
+Indicate to the assembler whether @code{L32R} instructions use absolute
+or PC-relative addressing. The default is to assume absolute addressing
+if the Xtensa processor includes the absolute @code{L32R} addressing
+option. Otherwise, only the PC-relative @code{L32R} mode can be used.
@item --target-align | --no-target-align
Enable or disable automatic alignment to reduce branch penalties at the
Enable or disable transformation of call instructions to allow calls
across a greater range of addresses. The default is
@option{--no-@-longcalls}.
+
+@item --transform | --no-transform
+Enable or disable all assembler transformations of Xtensa instructions.
+The default is @option{--transform};
+@option{--no-transform} should be used only in the rare cases when the
+instructions must be exactly as specified in the assembly source.
+@end table
+@end ifset
+
+@ifset Z80
+The following options are available when @value{AS} is configured for
+a Z80 family processor.
+@table @gcctabopt
+@item -z80
+Assemble for Z80 processor.
+@item -r800
+Assemble for R800 processor.
+@item -ignore-undocumented-instructions
+@itemx -Wnud
+Assemble undocumented Z80 instructions that also work on R800 without warning.
+@item -ignore-unportable-instructions
+@itemx -Wnup
+Assemble all undocumented Z80 instructions without warning.
+@item -warn-undocumented-instructions
+@itemx -Wud
+Issue a warning for undocumented Z80 instructions that also work on R800.
+@item -warn-unportable-instructions
+@itemx -Wup
+Issue a warning for undocumented Z80 instructions that do notwork on R800.
+@item -forbid-undocumented-instructions
+@itemx -Fud
+Treat all undocumented instructions as errors.
+@item -forbid-unportable-instructions
+@itemx -Fup
+Treat undocumented Z80 intructions that do notwork on R800 as errors.
@end table
@end ifset
Series Programming Manual}. For the H8/300H, see @cite{H8/300H Series
Programming Manual} (Renesas).
@end ifset
-@ifset H8/500
-For information on the H8/500 machine instruction set, see @cite{H8/500
-Series Programming Manual} (Renesas M21T001).
-@end ifset
@ifset SH
For information on the Renesas (formerly Hitachi) / SuperH SH machine instruction set,
see @cite{SH-Microcomputer User's Manual} (Renesas) or
@value{OBJ-NAME} format object files.
@end ifclear
@c The following should exhaust all configs that set MULTI-OBJ, ideally
-@ifset A29K
-On the @value{TARGET}, @command{@value{AS}} can be configured to produce either
-@code{a.out} or COFF format object files.
-@end ifset
@ifset I960
On the @value{TARGET}, @command{@value{AS}} can be configured to produce either
@code{b.out} or COFF format object files.
@ifset GENERIC
(@pxref{Line,,@code{.line}})
@end ifset
-@ifclear GENERIC
-@ifclear A29K
-(@pxref{Line,,@code{.line}})
-@end ifclear
-@ifset A29K
-(@pxref{Ln,,@code{.ln}})
-@end ifset
-@end ifclear
then it is used to calculate the number printed,
otherwise the actual line in the current source file is printed. The
message text is intended to be self explanatory (in the grand Unix
@cindex line comment character
Anything from the @dfn{line comment} character to the next newline
is considered a comment and is ignored. The line comment character is
-@ifset A29K
-@samp{;} for the AMD 29K family;
-@end ifset
@ifset ARC
@samp{;} on the ARC;
@end ifset
@ifset H8/300
@samp{;} for the H8/300 family;
@end ifset
-@ifset H8/500
-@samp{!} for the H8/500 family;
-@end ifset
@ifset HPPA
@samp{;} for the HPPA;
@end ifset
@ifset IP2K
@samp{#} on the ip2k;
@end ifset
+@ifset M32C
+@samp{#} on the m32c;
+@end ifset
@ifset M32R
@samp{#} on the m32r;
@end ifset
@ifset M68HC11
@samp{#} on the 68HC11 and 68HC12;
@end ifset
-@ifset M880X0
-@samp{;} on the M880x0;
-@end ifset
@ifset VAX
@samp{#} on the Vax;
@end ifset
+@ifset Z80
+@samp{;} for the Z80;
+@end ifset
@ifset Z8000
@samp{!} for the Z8000;
@end ifset
constants are an exception: they do not end statements.
@end ifclear
@ifset abnormal-separator
-@ifset A29K
-A @dfn{statement} ends at a newline character (@samp{\n}) or an ``at''
-sign (@samp{@@}). The newline or at sign is considered part of the
-preceding statement. Newlines and at signs within character constants
-are an exception: they do not end statements.
-@end ifset
@ifset HPPA
A @dfn{statement} ends at a newline character (@samp{\n}) or an exclamation
point (@samp{!}). The newline or exclamation point is considered part of the
@end ifset
@ifset H8
A @dfn{statement} ends at a newline character (@samp{\n}); or (for the
-H8/300) a dollar sign (@samp{$}); or (for the
-Renesas-SH or the
-H8/500) a semicolon
+H8/300) a dollar sign (@samp{$}); or (for the Renesas-SH) a semicolon
(@samp{;}). The newline or separator character is considered part of
the preceding statement. Newlines and separators within character
constants are an exception: they do not end statements.
(or semicolon @samp{;})
@end ifclear
@ifset abnormal-separator
-@ifset A29K
-(or at sign @samp{@@})
-@end ifset
@ifset H8
(or dollar sign @samp{$}, for the H8/300; or semicolon @samp{;} for the
-Renesas SH or H8/500)
+Renesas SH)
@end ifset
@end ifset
@end ifclear
4.2 assembler seems to allow any of @samp{defghDEFGH}.)
@end ignore
-On the H8/300, H8/500,
-Renesas / SuperH SH,
+On the H8/300, Renesas / SuperH SH,
and AMD 29K architectures, the letter must be
one of the letters @samp{DFPRSX} (in upper or lower case).
On the HPPA architecture, the letter must be @samp{E} (upper case only).
@end ifset
@ifclear GENERIC
-@ifset A29K
-One of the letters @samp{DFPRSX} (in upper or lower case).
-@end ifset
@ifset ARC
One of the letters @samp{DFRS} (in upper or lower case).
@end ifset
the task of adjusting mentions of object-file addresses so they refer to
the proper run-time addresses.
@ifset H8
-For the H8/300 and H8/500,
-and for the Renesas / SuperH SH,
+For the H8/300, and for the Renesas / SuperH SH,
@command{@value{AS}} pads sections if needed to
ensure they end on a word (sixteen bit) boundary.
@end ifset
@end ifset
@ifclear GENERIC
@ifset H8
-On the H8/300 and H8/500 platforms, each subsection is zero-padded to a word
+On the H8/300 platform, each subsection is zero-padded to a word
boundary (two bytes).
The same is true on the Renesas SH.
@end ifset
@c these paragraphs might need to vanish from this manual, and be
@c discussed in BFD chapter of binutils (or some such).
@end ifset
-@ifset A29K
-On the AMD 29K family, no particular padding is added to section or
-subsection sizes; @value{AS} forces no alignment on this platform.
-@end ifset
@end ifclear
Subsections appear in your object file in numeric order, lowest numbered
A symbol can be given an arbitrary value by writing a symbol, followed
by an equals sign @samp{=}, followed by an expression
(@pxref{Expressions}). This is equivalent to using the @code{.set}
-directive. @xref{Set,,@code{.set}}.
+directive. @xref{Set,,@code{.set}}. In the same way, using a double
+equals sign @samp{=}@samp{=} here represents an equivalent of the
+@code{.eqv} directive. @xref{Eqv,,@code{.eqv}}.
@node Symbol Names
@section Symbol Names
string of digits, letters, dollar signs (unless otherwise noted in
@ref{Machine Dependencies}), and underscores.
@end ifclear
-@ifset A29K
-For the AMD 29K family, @samp{?} is also allowed in the
-body of a symbol name, though not at its beginning.
-@end ifset
-
@ifset SPECIAL-SYMS
@ifset H8
Symbol names begin with a letter or with one of @samp{._}. On the
-Renesas SH or the H8/500, you can also use @code{$} in symbol names. That
+Renesas SH you can also use @code{$} in symbol names. That
character may be followed by any string of digits, letters, dollar signs (save
on the H8/300), and underscores.
@end ifset
@ifclear no-space-dir
@samp{.space 4}.
@end ifclear
-@ifset no-space-dir
-@ifset A29K
-@samp{.block 4}.
-@end ifset
-@end ifset
@node Symbol Attributes
@section Symbol Attributes
@item %
@dfn{Remainder}.
-@item <
-@itemx <<
+@item <<
@dfn{Shift Left}. Same as the C operator @samp{<<}.
-@item >
-@itemx >>
+@item >>
@dfn{Shift Right}. Same as the C operator @samp{>>}.
@end table
@item ==
@dfn{Is Equal To}
@item <>
+@itemx !=
@dfn{Is Not Equal To}
@item <
@dfn{Is Less Than}
-@itemx >
+@item >
@dfn{Is Greater Than}
-@itemx >=
+@item >=
@dfn{Is Greater Than Or Equal To}
-@itemx <=
+@item <=
@dfn{Is Less Than Or Equal To}
The comparison operators can be used as infix operators. A true results has a
* Endif:: @code{.endif}
* Equ:: @code{.equ @var{symbol}, @var{expression}}
* Equiv:: @code{.equiv @var{symbol}, @var{expression}}
+* Eqv:: @code{.eqv @var{symbol}, @var{expression}}
* Err:: @code{.err}
+* Error:: @code{.error @var{string}}
* Exitm:: @code{.exitm}
* Extern:: @code{.extern}
* Fail:: @code{.fail}
* Line:: @code{.line @var{line-number}}
@end ifclear
-* Ln:: @code{.ln @var{line-number}}
* Linkonce:: @code{.linkonce [@var{type}]}
* List:: @code{.list}
+* Ln:: @code{.ln @var{line-number}}
+
+* LNS directives:: @code{.file}, @code{.loc}, etc.
+
* Long:: @code{.long @var{expressions}}
@ignore
* Lsym:: @code{.lsym @var{symbol}, @var{expression}}
* VTableInherit:: @code{.vtable_inherit @var{child}, @var{parent}}
@end ifset
+* Warning:: @code{.warning @var{string}}
* Weak:: @code{.weak @var{names}}
+* Weakref:: @code{.weakref @var{alias}, @var{symbol}}
* Word:: @code{.word @var{expressions}}
* Deprecated:: Deprecated Directives
@end menu
with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
-For the a29k, arc, hppa, i386 using ELF, i860, iq2000, m68k, m88k, or32,
+For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32,
s390, sparc, tic4x, tic80 and xtensa, the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
might use this to add OS-specific CFI opcodes, or generic CFI
opcodes that GAS does not yet support.
+@node LNS directives
+@section @code{.file @var{fileno} @var{filename}}
+@cindex @code{file} directive
+When emitting dwarf2 line number information @code{.file} assigns filenames
+to the @code{.debug_line} file name table. The @var{fileno} operand should
+be a unique positive integer to use as the index of the entry in the table.
+The @var{filename} operand is a C string literal.
+
+The detail of filename indicies is exposed to the user because the filename
+table is shared with the @code{.debug_info} section of the dwarf2 debugging
+information, and thus the user must know the exact indicies that table
+entries will have.
+
+@section @code{.loc @var{fileno} @var{lineno} [@var{column}] [@var{options}]}
+@cindex @code{loc} directive
+The @code{.loc} directive will add row to the @code{.debug_line} line
+number matrix corresponding to the immediately following assembly
+instruction. The @var{fileno}, @var{lineno}, and optional @var{column}
+arguments will be applied to the @code{.debug_line} state machine before
+the row is added.
+
+The @var{options} are a sequence of the following tokens in any order:
+
+@table @code
+@item basic_block
+This option will set the @code{basic_block} register in the
+@code{.debug_line} state machine to @code{true}.
+
+@item prologue_end
+This option will set the @code{prologue_end} register in the
+@code{.debug_line} state machine to @code{true}.
+
+@item epilogue_begin
+This option will set the @code{epilogue_begin} register in the
+@code{.debug_line} state machine to @code{true}.
+
+@item is_stmt @var{value}
+This option will set the @code{is_stmt} register in the
+@code{.debug_line} state machine to @code{value}, which must be
+either 0 or 1.
+
+@item isa @var{value}
+This directive will set the @code{isa} register in the @code{.debug_line}
+state machine to @var{value}, which must be an unsigned integer.
+
+@end table
+
+@section @code{.loc_mark_blocks @var{enable}}
+@cindex @code{loc_mark_blocks} directive
+The @code{.loc_mark_blocks} directive makes the assembler emit an entry
+to the @code{.debug_line} line number matrix with the @code{basic_block}
+register in the state machine set whenever a code label is seen.
+The @var{enable} argument should be either 1 or 0, to enable or disable
+this function respectively.
+
@node Data
@section @code{.data @var{subsection}}
@samp{@var{symbol} .equ @var{expression}}.
@end ifset
+@ifset Z80
+The syntax for @code{equ} on the Z80 is
+@samp{@var{symbol} equ @var{expression}}.
+On the Z80 it is an eror if @var{symbol} is already defined,
+compare @xref{Equiv}.
+@end ifset
+
@node Equiv
@section @code{.equiv @var{symbol}, @var{expression}}
@cindex @code{equiv} directive
.endif
.equ SYM,VAL
@end smallexample
+plus it protects the symbol from later redefinition.
+
+@node Eqv
+@section @code{.eqv @var{symbol}, @var{expression}}
+@cindex @code{eqv} directive
+The @code{.eqv} directive is like @code{.equiv}, but no attempt is made to
+evaluate the expression or any part of it immediately. Instead each time
+the resulting symbol is used in an expression, a snapshot of its current
+value is taken.
@node Err
@section @code{.err}
message and, unless the @option{-Z} option was used, it will not generate an
object file. This can be used to signal error an conditionally compiled code.
+@node Error
+@section @code{.error "@var{string}"}
+@cindex error directive
+
+Similarly to @code{.err}, this directive emits an error, but you can specify a
+string that will be emitted as the error message. If you don't specify the
+message, it defaults to @code{".error directive invoked in source file"}.
+@xref{Errors, ,Error and Warning Messages}.
+
+@smallexample
+ .error "This code has not been assembled and tested."
+@end smallexample
+
@node Exitm
@section @code{.exitm}
Exit early from the current macro definition. @xref{Macro}.
to specify an empty file name, you must give the quotes--@code{""}. This
statement may go away in future: it is only recognized to be compatible with
old @command{@value{AS}} programs.
-@ifset A29K
-In some configurations of @command{@value{AS}}, @code{.file} has already been
-removed to avoid conflicts with other assemblers. @xref{Machine Dependencies}.
-@end ifset
@end ifclear
@node Fill
has been defined. Note a symbol which has been referenced but not yet defined
is considered to be undefined.
+@cindex @code{ifb} directive
+@item .ifb @var{text}
+Assembles the following section of code if the operand is blank (empty).
+
@cindex @code{ifc} directive
@item .ifc @var{string1},@var{string2}
Assembles the following section of code if the two strings are the same. The
@item .iflt @var{absolute expression}
Assembles the following section of code if the argument is less than zero.
+@cindex @code{ifnb} directive
+@item .ifnb @var{text}
+Like @code{.ifb}, but the sense of the test is reversed: this assembles the
+following section of code if the operand is non-blank (non-empty).
+
@cindex @code{ifnc} directive
@item .ifnc @var{string1},@var{string2}.
Like @code{.ifc}, but the sense of the test is reversed: this assembles the
@ifclear GENERIC
@ifset H8
-On the H8/500 and most forms of the H8/300, @code{.int} emits 16-bit
+On most forms of the H8/300, @code{.int} emits 16-bit
integers. On the H8/300H and the Renesas SH, however, @code{.int} emits
32-bit integers.
@end ifset
move d3,sp@@-
@end example
+For some caveats with the spelling of @var{symbol}, see also the discussion
+at @xref{Macro}.
+
@node Irpc
@section @code{.irpc @var{symbol},@var{values}}@dots{}
move d3,sp@@-
@end example
+For some caveats with the spelling of @var{symbol}, see also the discussion
+at @xref{Macro}.
+
@node Lcomm
@section @code{.lcomm @var{symbol} , @var{length}}
@command{@value{AS}} will no longer support this directive: it is recognized only
for compatibility with existing assembler programs.
-@ifset GENERIC
-@ifset A29K
-@emph{Warning:} In the AMD29K configuration of @value{AS}, this command is
-not available; use the synonym @code{.ln} in that context.
-@end ifset
-@end ifset
@end ifset
@ifclear no-line-dir
@cindex @code{macro} directive
Begin the definition of a macro called @var{macname}. If your macro
definition requires arguments, specify their names after the macro name,
-separated by commas or spaces. You can supply a default value for any
-macro argument by following the name with @samp{=@var{deflt}}. For
-example, these are all valid @code{.macro} statements:
+separated by commas or spaces. You can qualify the macro argument to
+indicate whether all invocations must specify a non-blank value (through
+@samp{:@code{req}}), or whether it takes all of the remaining arguments
+(through @samp{:@code{vararg}}). You can supply a default value for any
+macro argument by following the name with @samp{=@var{deflt}}. You
+cannot define two macros with the same @var{macname} unless it has been
+subject to the @code{.purgem} directive (@xref{Purgem}.) between the two
+definitions. For example, these are all valid @code{.macro} statements:
@table @code
@item .macro comm
@samp{0}, and @samp{\p2} evaluating to @var{b}).
@end table
+@item .macro m p1:req, p2=0, p3:vararg
+Begin the definition of a macro called @code{m}, with at least three
+arguments. The first argument must always have a value specified, but
+not the second, which instead has a default value. The third formal
+will get assigned all remaining arguments specified at invocation time.
+
When you call a macro, you can specify the argument values either by
position, or by keyword. For example, @samp{sum 9,17} is equivalent to
@samp{sum to=17, from=9}.
+Note that since each of the @var{macargs} can be an identifier exactly
+as any other one permitted by the target architecture, there may be
+occasional problems if the target hand-crafts special meanings to certain
+characters when they occur in a special position. For example, if colon
+(@code{:}) is generally permitted to be part of a symbol name, but the
+architecture specific code special-cases it when occuring as the final
+character of a symbol (to denote a label), then the macro parameter
+replacement code will have no way of knowing that and consider the whole
+construct (including the colon) an identifier, and check only this
+identifier for being the subject to parameter substitution. In this
+example, besides the potential of just separating identifier and colon
+by white space, using alternate macro syntax (@xref{Altmacro}.) and
+ampersand (@code{&}) as the character to separate literal text from macro
+parameters (or macro parameters from one another) would provide a way to
+achieve the same effect:
+
+@example
+ .altmacro
+ .macro label l
+l&:
+ .endm
+@end example
+
+This applies identically to the identifiers used in @code{.irp} (@xref{Irp}.)
+and @code{.irpc} (@xref{Irpc}.).
+
@item .endm
@cindex @code{endm} directive
Mark the end of a macro definition.
For ELF targets, the @code{.section} directive is used like this:
@smallexample
-.section @var{name} [, "@var{flags}"[, @@@var{type}[,@var{flag_specific_arguments}]]
+.section @var{name} [, "@var{flags}"[, @@@var{type}[,@var{flag_specific_arguments}]]]
@end smallexample
The optional @var{flags} argument is a quoted string which may contain any
@samp{@var{symbol} .set @var{expression}}.
@end ifset
+@ifset Z80
+On Z80 @code{set} is a real instruction, use
+@samp{@var{symbol} defl @var{expression}} instead.
+@end ifset
+
@node Short
@section @code{.short @var{expressions}}
@end ifset
@end ifclear
-@ifset A29K
-@ifclear GENERIC
-@node Space
-@section @code{.space}
-@cindex @code{space} directive
-@end ifclear
-On the AMD 29K, this directive is ignored; it is accepted for
-compatibility with other AMD 29K assemblers.
-
-@quotation
-@emph{Warning:} In most versions of the @sc{gnu} assembler, the directive
-@code{.space} has the effect of @code{.block} @xref{Machine Dependencies}.
-@end quotation
-@end ifset
-
@ifset have-stabs
@node Stab
@section @code{.stabd, .stabn, .stabs}
@node VTableEntry
@section @code{.vtable_entry @var{table}, @var{offset}}
-@cindex @code{vtable_entry}
+@cindex @code{vtable_entry} directive
This directive finds or creates a symbol @code{table} and creates a
@code{VTABLE_ENTRY} relocation for it with an addend of @code{offset}.
@node VTableInherit
@section @code{.vtable_inherit @var{child}, @var{parent}}
-@cindex @code{vtable_inherit}
+@cindex @code{vtable_inherit} directive
This directive finds the symbol @code{child} and finds or creates the symbol
@code{parent} and then creates a @code{VTABLE_INHERIT} relocation for the
parent whose addend is the value of the child symbol. As a special case the
parent name of @code{0} is treated as refering the @code{*ABS*} section.
@end ifset
+@node Warning
+@section @code{.warning "@var{string}"}
+@cindex warning directive
+Similar to the directive @code{.error}
+(@pxref{Error,,@code{.error "@var{string}"}}), but just emits a warning.
+
@node Weak
@section @code{.weak @var{names}}
This directive sets the weak attribute on the comma separated list of symbol
@code{names}. If the symbols do not already exist, they will be created.
-Weak symbols are supported in COFF as a GNU extension. This directive
-sets the weak attribute on the comma separated list of symbol
+On COFF targets other than PE, weak symbols are a GNU extension. This
+directive sets the weak attribute on the comma separated list of symbol
@code{names}. If the symbols do not already exist, they will be created.
-@smallexample
-@code{.weak @var{name} [ < = | == > @var{alternate}] [, ...]}
-@end smallexample
+On the PE target, weak symbols are supported natively as weak aliases.
+When a weak symbol is created that is not an alias, GAS creates an
+alternate symbol to hold the default value.
+
+@node Weakref
+@section @code{.weakref @var{alias}, @var{target}}
+
+@cindex @code{weakref} directive
+This directive creates an alias to the target symbol that enables the symbol to
+be referenced with weak-symbol semantics, but without actually making it weak.
+If direct references or definitions of the symbol are present, then the symbol
+will not be weak, but if all references to it are through weak references, the
+symbol will be marked as weak in the symbol table.
-On the PE target, weak aliases are supported natively. Weak aliases
-(usually called "weak externals" in PE) are created when an alternate
-name is specified. When a weak symbol is linked and the symbol is not
-defined, the weak symbol becomes an alias for the alternate symbol. If
-one equal sign is used, the linker searches for defined symbols within
-other objects and libraries. This is the usual mode, historically
-called "lazy externals." Otherwise, when two equal signs are used,
-the linker searches for defined symbols only within other objects.
+The effect is equivalent to moving all references to the alias to a separate
+assembly source file, renaming the alias to the symbol in it, declaring the
+symbol as weak there, and running a reloadable link to merge the object files
+resulting from the assembly of the new source file and the old source file that
+had the references to the alias removed.
-Non-alias weak symbols are supported on PE as a GNU extension.
+The alias itself never makes to the symbol table, and is entirely handled
+within the assembler.
@node Word
@section @code{.word @var{expressions}}
subject, see the hardware manufacturer's manual.
@menu
-@ifset A29K
-* AMD29K-Dependent:: AMD 29K Dependent Features
-@end ifset
@ifset ALPHA
* Alpha-Dependent:: Alpha Dependent Features
@end ifset
@ifset ARM
* ARM-Dependent:: ARM Dependent Features
@end ifset
+@ifset BFIN
+* BFIN-Dependent:: BFIN Dependent Features
+@end ifset
@ifset CRIS
* CRIS-Dependent:: CRIS Dependent Features
@end ifset
@ifset H8/300
* H8/300-Dependent:: Renesas H8/300 Dependent Features
@end ifset
-@ifset H8/500
-* H8/500-Dependent:: Renesas H8/500 Dependent Features
-@end ifset
@ifset HPPA
* HPPA-Dependent:: HPPA Dependent Features
@end ifset
@ifset I960
* i960-Dependent:: Intel 80960 Dependent Features
@end ifset
+@ifset IA64
+* IA-64-Dependent:: Intel IA-64 Dependent Features
+@end ifset
@ifset IP2K
* IP2K-Dependent:: IP2K Dependent Features
@end ifset
+@ifset M32C
+* M32C-Dependent:: M32C Dependent Features
+@end ifset
@ifset M32R
* M32R-Dependent:: M32R Dependent Features
@end ifset
@ifset M68HC11
* M68HC11-Dependent:: M68HC11 and 68HC12 Dependent Features
@end ifset
-@ifset M880X0
-* M88K-Dependent:: M880x0 Dependent Features
-@end ifset
@ifset MIPS
* MIPS-Dependent:: MIPS Dependent Features
@end ifset
@ifset XTENSA
* Xtensa-Dependent:: Xtensa Dependent Features
@end ifset
+@ifset Z80
+* Z80-Dependent:: Z80 Dependent Features
+@end ifset
@ifset Z8000
* Z8000-Dependent:: Z8000 Dependent Features
@end ifset
@c node and sectioning commands; hence the repetition of @chapter BLAH
@c in both conditional blocks.
-@ifset A29K
-@include c-a29k.texi
-@end ifset
-
@ifset ALPHA
@include c-alpha.texi
@end ifset
@include c-arm.texi
@end ifset
+@ifset BFIN
+@include c-bfin.texi
+@end ifset
+
@ifset CRIS
@include c-cris.texi
@end ifset
@menu
* H8/300-Dependent:: Renesas H8/300 Dependent Features
-* H8/500-Dependent:: Renesas H8/500 Dependent Features
* SH-Dependent:: Renesas SH Dependent Features
@end menu
@lowersections
@include c-h8300.texi
@end ifset
-@ifset H8/500
-@include c-h8500.texi
-@end ifset
-
@ifset HPPA
@include c-hppa.texi
@end ifset
@include c-ip2k.texi
@end ifset
+@ifset M32C
+@include c-m32c.texi
+@end ifset
+
@ifset M32R
@include c-m32r.texi
@end ifset
@include c-m68hc11.texi
@end ifset
-@ifset M880X0
-@include c-m88k.texi
-@end ifset
-
@ifset MIPS
@include c-mips.texi
@end ifset
@include c-tic54x.texi
@end ifset
+@ifset Z80
+@include c-z80.texi
+@end ifset
+
@ifset Z8000
@include c-z8k.texi
@end ifset
@node Acknowledgements
@chapter Acknowledgements
-If you have contributed to @command{@value{AS}} and your name isn't listed here,
+If you have contributed to GAS and your name isn't listed here,
it is not meant as a slight. We just don't know about it. Send mail to the
maintainer, and we'll correct the situation. Currently
@c (January 1994),
(which hasn't been merged in yet). Ralph Campbell worked with the MIPS code to
support a.out format.
-Support for the Zilog Z8k and Renesas H8/300 and H8/500 processors (tc-z8k,
-tc-h8300, tc-h8500), and IEEE 695 object file format (obj-ieee), was written by
+Support for the Zilog Z8k and Renesas H8/300 processors (tc-z8k,
+tc-h8300), and IEEE 695 object file format (obj-ieee), was written by
Steve Chamberlain of Cygnus Support. Steve also modified the COFF back end to
use BFD for some low-level operations, for use with the H8/300 and AMD 29k
targets.
added support for MIPS ECOFF and ELF targets, wrote the initial RS/6000 and
PowerPC assembler, and made a few other minor patches.
-Steve Chamberlain made @command{@value{AS}} able to generate listings.
+Steve Chamberlain made GAS able to generate listings.
Hewlett-Packard contributed support for the HP9000/300.
projects / deliverable / binutils-gdb.git / blobdiff