\input texinfo @c -*-Texinfo-*-
-@c Copyright (C) 1991-2014 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2015 Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@c md_parse_option definitions in config/tc-*.c
This file documents the GNU Assembler "@value{AS}".
@c man begin COPYRIGHT
-Copyright @copyright{} 1991-2014 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991-2014 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
[@b{-g}[@var{debug level}]] [@b{-G} @var{num}] [@b{-KPIC}] [@b{-call_shared}]
[@b{-non_shared}] [@b{-xgot} [@b{-mvxworks-pic}]
[@b{-mabi}=@var{ABI}] [@b{-32}] [@b{-n32}] [@b{-64}] [@b{-mfp32}] [@b{-mgp32}]
+ [@b{-mfp64}] [@b{-mgp64}] [@b{-mfpxx}]
+ [@b{-modd-spreg}] [@b{-mno-odd-spreg}]
[@b{-march}=@var{CPU}] [@b{-mtune}=@var{CPU}] [@b{-mips1}] [@b{-mips2}]
[@b{-mips3}] [@b{-mips4}] [@b{-mips5}] [@b{-mips32}] [@b{-mips32r2}]
- [@b{-mips64}] [@b{-mips64r2}]
+ [@b{-mips32r3}] [@b{-mips32r5}] [@b{-mips32r6}] [@b{-mips64}] [@b{-mips64r2}]
+ [@b{-mips64r3}] [@b{-mips64r5}] [@b{-mips64r6}]
[@b{-construct-floats}] [@b{-no-construct-floats}]
[@b{-mnan=@var{encoding}}]
[@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}]
[@b{-mdsp}] [@b{-mno-dsp}]
[@b{-mdspr2}] [@b{-mno-dspr2}]
[@b{-mmsa}] [@b{-mno-msa}]
+ [@b{-mxpa}] [@b{-mno-xpa}]
[@b{-mmt}] [@b{-mno-mt}]
[@b{-mmcu}] [@b{-mno-mcu}]
[@b{-minsn32}] [@b{-mno-insn32}]
[@b{-msolaris}|@b{-mno-solaris}]
[@b{-nops=@var{count}}]
@end ifset
+@ifset RL78
+
+@emph{Target RL78 options:}
+ [@b{-mg10}]
+ [@b{-m32bit-doubles}|@b{-m64bit-doubles}]
+@end ifset
@ifset RX
@emph{Target RX options:}
[@b{-mcpu=54[123589]}|@b{-mcpu=54[56]lp}] [@b{-mfar-mode}|@b{-mf}]
[@b{-merrors-to-file} @var{<filename>}|@b{-me} @var{<filename>}]
@end ifset
-
@ifset TIC6X
@emph{Target TIC6X options:}
@ifset TILEPRO
@c TILEPro has no machine-dependent assembler options
@end ifset
+@ifset VISIUM
+@emph{Target Visium options:}
+ [@b{-mtune=@var{arch}}]
+@end ifset
@ifset XTENSA
@emph{Target Xtensa options:}
[@b{--[no-]target-align}] [@b{--[no-]longcalls}]
[@b{--[no-]transform}]
[@b{--rename-section} @var{oldname}=@var{newname}]
+ [@b{--[no-]trampolines}]
@end ifset
-
@ifset Z80
@emph{Target Z80 options:}
[@b{ -forbid-undocumented-instructions}] [@b{-Fud}]
[@b{ -forbid-unportable-instructions}] [@b{-Fup}]
@end ifset
-
@ifset Z8000
+
@c Z8000 has no machine-dependent assembler options
@end ifset
@itemx -mips5
@itemx -mips32
@itemx -mips32r2
+@itemx -mips32r3
+@itemx -mips32r5
+@itemx -mips32r6
@itemx -mips64
@itemx -mips64r2
+@itemx -mips64r3
+@itemx -mips64r5
+@itemx -mips64r6
Generate code for a particular MIPS Instruction Set Architecture level.
@samp{-mips1} is an alias for @samp{-march=r3000}, @samp{-mips2} is an
alias for @samp{-march=r6000}, @samp{-mips3} is an alias for
@samp{-march=r4000} and @samp{-mips4} is an alias for @samp{-march=r8000}.
-@samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips64}, and
-@samp{-mips64r2} correspond to generic MIPS V, MIPS32, MIPS32 Release 2,
-MIPS64, and MIPS64 Release 2 ISA processors, respectively.
+@samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips32r3},
+@samp{-mips32r5}, @samp{-mips32r6}, @samp{-mips64}, @samp{-mips64r2},
+@samp{-mips64r3}, @samp{-mips64r5}, and @samp{-mips64r6} correspond to generic
+MIPS V, MIPS32, MIPS32 Release 2, MIPS32 Release 3, MIPS32 Release 5, MIPS32
+Release 6, MIPS64, MIPS64 Release 2, MIPS64 Release 3, MIPS64 Release 5, and
+MIPS64 Release 6 ISA processors, respectively.
@item -march=@var{cpu}
Generate code for a particular MIPS CPU.
all times. @samp{-mgp32} controls the size of general-purpose registers
and @samp{-mfp32} controls the size of floating-point registers.
+@item -mgp64
+@itemx -mfp64
+The register sizes are normally inferred from the ISA and ABI, but these
+flags force a certain group of registers to be treated as 64 bits wide at
+all times. @samp{-mgp64} controls the size of general-purpose registers
+and @samp{-mfp64} controls the size of floating-point registers.
+
+@item -mfpxx
+The register sizes are normally inferred from the ISA and ABI, but using
+this flag in combination with @samp{-mabi=32} enables an ABI variant
+which will operate correctly with floating-point registers which are
+32 or 64 bits wide.
+
+@item -modd-spreg
+@itemx -mno-odd-spreg
+Enable use of floating-point operations on odd-numbered single-precision
+registers when supported by the ISA. @samp{-mfpxx} implies
+@samp{-mno-odd-spreg}, otherwise the default is @samp{-modd-spreg}.
+
@item -mips16
@itemx -no-mips16
Generate code for the MIPS 16 processor. This is equivalent to putting
This tells the assembler to accept MSA instructions.
@samp{-mno-msa} turns off this option.
+@item -mxpa
+@itemx -mno-xpa
+Generate code for the MIPS eXtended Physical Address (XPA) Extension.
+This tells the assembler to accept XPA instructions.
+@samp{-mno-xpa} turns off this option.
+
@item -mmt
@itemx -mno-mt
Generate code for the MT Application Specific Extension.
@item -march=@var{processor}
Specify which s390 processor variant is the target, @samp{g6}, @samp{g6},
@samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, @samp{z10},
-@samp{z196}, or @samp{zEC12}.
+@samp{z196}, @samp{zEC12}, or @samp{z13}.
@item -mregnames
@itemx -mno-regnames
Allow or disallow symbolic names for registers.
@end ifset
+@ifset VISIUM
+
+@ifclear man
+@xref{Visium Options}, for the options available when @value{AS} is configured
+for a Visium processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following option is available when @value{AS} is configured for a Visium
+processor.
+@c man end
+@c man begin INCLUDE
+@include c-visium.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
@ifset XTENSA
@ifclear man
Local symbols are defined and used within the assembler, but they are
normally not saved in object files. Thus, they are not visible when debugging.
-You may use the @samp{-L} option (@pxref{L, ,Include Local Symbols:
-@option{-L}}) to retain the local symbols in the object files.
+You may use the @samp{-L} option (@pxref{L, ,Include Local Symbols})
+to retain the local symbols in the object files.
@subheading Local Labels
with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
-For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32,
+For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or1k,
s390, sparc, tic4x, tic80 and xtensa, the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
@item
0 for files not affected by the floating-point ABI.
@item
-1 for files using the hardware floating-point with a standard double-precision
-FPU.
+1 for files using the hardware floating-point ABI with a standard
+double-precision FPU.
@item
2 for files using the hardware floating-point ABI with a single-precision FPU.
@item
3 for files using the software floating-point ABI.
@item
-4 for files using the hardware floating-point ABI with 64-bit wide
-double-precision floating-point registers and 32-bit wide general
-purpose registers.
+4 for files using the deprecated hardware floating-point ABI which used 64-bit
+floating-point registers, 32-bit general-purpose registers and increased the
+number of callee-saved floating-point registers.
+@item
+5 for files using the hardware floating-point ABI with a double-precision FPU
+with either 32-bit or 64-bit floating-point registers and 32-bit
+general-purpose registers.
+@item
+6 for files using the hardware floating-point ABI with 64-bit floating-point
+registers and 32-bit general-purpose registers.
+@item
+7 for files using the hardware floating-point ABI with 64-bit floating-point
+registers, 32-bit general-purpose registers and a rule that forbids the
+direct use of odd-numbered single-precision floating-point registers.
@end itemize
@end table
@ifset V850
* V850-Dependent:: V850 Dependent Features
@end ifset
+@ifset VAX
+* Vax-Dependent:: VAX Dependent Features
+@end ifset
+@ifset VISIUM
+* Visium-Dependent:: Visium Dependent Features
+@end ifset
@ifset XGATE
* XGATE-Dependent:: XGATE Features
@end ifset
@ifset Z8000
* Z8000-Dependent:: Z8000 Dependent Features
@end ifset
-@ifset VAX
-* Vax-Dependent:: VAX Dependent Features
-@end ifset
@end menu
@lowersections
@include c-tilepro.texi
@end ifset
-@ifset Z80
-@include c-z80.texi
-@end ifset
-
-@ifset Z8000
-@include c-z8k.texi
+@ifset V850
+@include c-v850.texi
@end ifset
@ifset VAX
@include c-vax.texi
@end ifset
-@ifset V850
-@include c-v850.texi
+@ifset VISIUM
+@include c-visium.texi
@end ifset
@ifset XGATE
@include c-xtensa.texi
@end ifset
+@ifset Z80
+@include c-z80.texi
+@end ifset
+
+@ifset Z8000
+@include c-z8k.texi
+@end ifset
+
@ifset GENERIC
@c reverse effect of @down at top of generic Machine-Dep chapter
@raisesections
projects / deliverable / binutils-gdb.git / blobdiff