[@b{-mnan=@var{encoding}}]
[@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}]
[@b{-mips16}] [@b{-no-mips16}]
+ [@b{-mmips16e2}] [@b{-mno-mips16e2}]
[@b{-mmicromips}] [@b{-mno-micromips}]
[@b{-msmartmips}] [@b{-mno-smartmips}]
[@b{-mips3d}] [@b{-no-mips3d}]
@b{-m620}|@b{-me500}|@b{-e500x2}|@b{-me500mc}|@b{-me500mc64}|@b{-me5500}|@b{-me6500}|@b{-mppc64bridge}|
@b{-mbooke}|@b{-mpower4}|@b{-mpwr4}|@b{-mpower5}|@b{-mpwr5}|@b{-mpwr5x}|@b{-mpower6}|@b{-mpwr6}|
@b{-mpower7}|@b{-mpwr7}|@b{-mpower8}|@b{-mpwr8}|@b{-mpower9}|@b{-mpwr9}@b{-ma2}|
- @b{-mcell}|@b{-mspe}|@b{-mtitan}|@b{-me300}|@b{-mcom}]
+ @b{-mcell}|@b{-mspe}|@b{-mspe2}|@b{-mtitan}|@b{-me300}|@b{-mcom}]
[@b{-many}] [@b{-maltivec}|@b{-mvsx}|@b{-mhtm}|@b{-mvle}]
[@b{-mregnames}|@b{-mno-regnames}]
[@b{-mrelocatable}|@b{-mrelocatable-lib}|@b{-K PIC}] [@b{-memb}]
[@b{-mnolink-relax}]
[@b{-mno-warn-regname-label}]
@end ifset
+@ifset RISCV
+
+@emph{Target RISC-V options:}
+ [@b{-fpic}|@b{-fPIC}|@b{-fno-pic}]
+ [@b{-march}=@var{ISA}]
+ [@b{-mabi}=@var{ABI}]
+@end ifset
@ifset RL78
@emph{Target RL78 options:}
[@b{-mint-register=@var{number}}]
[@b{-mgcc-abi}|@b{-mrx-abi}]
@end ifset
-@ifset RISCV
-
-@emph{Target RISC-V options:}
- [@b{-march}=@var{ISA}]
- [@b{-mabi}=@var{ABI}]
-@end ifset
@ifset S390
@emph{Target s390 options:}
@item -mips16
@itemx -no-mips16
Generate code for the MIPS 16 processor. This is equivalent to putting
-@code{.set mips16} at the start of the assembly file. @samp{-no-mips16}
+@code{.module mips16} at the start of the assembly file. @samp{-no-mips16}
turns off this option.
+@item -mmips16e2
+@itemx -mno-mips16e2
+Enable the use of MIPS16e2 instructions in MIPS16 mode. This is equivalent
+to putting @code{.module mips16e2} at the start of the assembly file.
+@samp{-mno-mips16e2} turns off this option.
+
@item -mmicromips
@itemx -mno-micromips
Generate code for the microMIPS processor. This is equivalent to putting
-@code{.set micromips} at the start of the assembly file. @samp{-mno-micromips}
-turns off this option. This is equivalent to putting @code{.set nomicromips}
-at the start of the assembly file.
+@code{.module micromips} at the start of the assembly file.
+@samp{-mno-micromips} turns off this option. This is equivalent to putting
+@code{.module nomicromips} at the start of the assembly file.
@item -msmartmips
@itemx -mno-smartmips
-Enables the SmartMIPS extension to the MIPS32 instruction set. This is
-equivalent to putting @code{.set smartmips} at the start of the assembly file.
-@samp{-mno-smartmips} turns off this option.
+Enables the SmartMIPS extension to the MIPS32 instruction set. This is
+equivalent to putting @code{.module smartmips} at the start of the assembly
+file. @samp{-mno-smartmips} turns off this option.
@item -mips3d
@itemx -no-mips3d
@ifset RISCV
@ifclear man
-@xref{RISC-V-Opts}, for the options available when @value{AS} is configured
+@xref{RISC-V-Options}, for the options available when @value{AS} is configured
for a RISC-V processor.
@end ifclear
@ifset man
@c man begin OPTIONS
The following options are available when @value{AS} is configured for a
-RISC-V processor.
+RISC-V processor.
@c man end
@c man begin INCLUDE
@include c-riscv.texi
@samp{arch3}), @samp{g6}, @samp{z900} (or @samp{arch5}), @samp{z990} (or
@samp{arch6}), @samp{z9-109}, @samp{z9-ec} (or @samp{arch7}), @samp{z10} (or
@samp{arch8}), @samp{z196} (or @samp{arch9}), @samp{zEC12} (or @samp{arch10}),
-@samp{z13} (or @samp{arch11}), or @samp{arch12}.
+@samp{z13} (or @samp{arch11}), or @samp{z14} (or @samp{arch12}).
@item -mregnames
@itemx -mno-regnames
Allow or disallow symbolic names for registers.
The second expression (also absolute) gives the fill value to be stored in the
padding bytes. It (and the comma) may be omitted. If it is omitted, the
-padding bytes are normally zero. However, on some systems, if the section is
+padding bytes are normally zero. However, on most systems, if the section is
marked as containing code and the fill value is omitted, the space is filled
with no-op instructions.
The second expression (also absolute) gives the fill value to be stored in the
padding bytes. It (and the comma) may be omitted. If it is omitted, the
-padding bytes are normally zero. However, on some systems, if the section is
+padding bytes are normally zero. However, on most systems, if the section is
marked as containing code and the fill value is omitted, the space is filled
with no-op instructions.
This directive will set the @code{discriminator} register in the @code{.debug_line}
state machine to @var{value}, which must be an unsigned integer.
+@item view @var{value}
+This option causes a row to be added to @code{.debug_line} in reference to the
+current address (which might not be the same as that of the following assembly
+instruction), and to associate @var{value} with the @code{view} register in the
+@code{.debug_line} state machine. If @var{value} is a label, both the
+@code{view} register and the label are set to the number of prior @code{.loc}
+directives at the same program location. If @var{value} is the literal
+@code{0}, the @code{view} register is set to zero, and the assembler asserts
+that there aren't any prior @code{.loc} directives at the same program
+location. If @var{value} is the literal @code{-0}, the assembler arrange for
+the @code{view} register to be reset in this row, even if there are prior
+@code{.loc} directives at the same program location.
+
@end table
@node Loc_mark_labels
The second expression (also absolute) gives the fill value to be stored in the
padding bytes. It (and the comma) may be omitted. If it is omitted, the
-padding bytes are normally zero. However, on some systems, if the section is
+padding bytes are normally zero. However, on most systems, if the section is
marked as containing code and the fill value is omitted, the space is filled
with no-op instructions.
.long 0
@end example
+A count of zero is allowed, but nothing is generated. Negative counts are not
+allowed and if encountered will be treated as if they were zero.
+
@node Sbttl
@section @code{.sbttl "@var{subheading}"}
@cindex eight-byte integer
@cindex integer, 8-byte
-Like the @option{.8byte} directive, except that it inserts unaligned, eight
+Like the @option{.2byte} directive, except that it inserts unaligned, eight
byte long bignum values into the output.
@end ifset
@ifset PRU
* PRU-Dependent:: PRU Dependent Features
@end ifset
-@ifset RL78
-* RL78-Dependent:: RL78 Dependent Features
-@end ifset
@ifset RISCV
* RISC-V-Dependent:: RISC-V Dependent Features
@end ifset
+@ifset RL78
+* RL78-Dependent:: RL78 Dependent Features
+@end ifset
@ifset RX
* RX-Dependent:: RX Dependent Features
@end ifset
@include c-pru.texi
@end ifset
-@ifset RL78
-@include c-rl78.texi
-@end ifset
-
@ifset RISCV
@include c-riscv.texi
@end ifset
+@ifset RL78
+@include c-rl78.texi
+@end ifset
+
@ifset RX
@include c-rx.texi
@end ifset
projects / deliverable / binutils-gdb.git / blobdiff