\input texinfo @c -*-Texinfo-*-
-@c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-@c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1991-2015 Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@c md_parse_option definitions in config/tc-*.c
This file documents the GNU Assembler "@value{AS}".
@c man begin COPYRIGHT
-Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-Inc.
+Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-Inc.
+Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
[@b{--compress-debug-sections}] [@b{--nocompress-debug-sections}]
[@b{--debug-prefix-map} @var{old}=@var{new}]
[@b{--defsym} @var{sym}=@var{val}] [@b{-f}] [@b{-g}] [@b{--gstabs}]
- [@b{--gstabs+}] [@b{--gdwarf-2}] [@b{--help}] [@b{-I} @var{dir}] [@b{-J}]
+ [@b{--gstabs+}] [@b{--gdwarf-2}] [@b{--gdwarf-sections}]
+ [@b{--help}] [@b{-I} @var{dir}] [@b{-J}]
[@b{-K}] [@b{-L}] [@b{--listing-lhs-width}=@var{NUM}]
[@b{--listing-lhs-width2}=@var{NUM}] [@b{--listing-rhs-width}=@var{NUM}]
[@b{--listing-cont-lines}=@var{NUM}] [@b{--keep-locals}] [@b{-o}
@c
@c Target dependent options are listed below. Keep the list sorted.
@c Add an empty line for separation.
+@ifset AARCH64
+
+@emph{Target AArch64 options:}
+ [@b{-EB}|@b{-EL}]
+ [@b{-mabi}=@var{ABI}]
+@end ifset
@ifset ALPHA
@emph{Target Alpha options:}
@ifset I80386
@emph{Target i386 options:}
- [@b{--32}|@b{--n32}|@b{--64}] [@b{-n}]
+ [@b{--32}|@b{--x32}|@b{--64}] [@b{-n}]
[@b{-march}=@var{CPU}[+@var{EXTENSION}@dots{}]] [@b{-mtune}=@var{CPU}]
@end ifset
@ifset I960
@ifset M68HC11
@emph{Target M68HC11 options:}
- [@b{-m68hc11}|@b{-m68hc12}|@b{-m68hcs12}]
+ [@b{-m68hc11}|@b{-m68hc12}|@b{-m68hcs12}|@b{-mm9s12x}|@b{-mm9s12xg}]
[@b{-mshort}|@b{-mlong}]
[@b{-mshort-double}|@b{-mlong-double}]
[@b{--force-long-branches}] [@b{--short-branches}]
[@b{-jsri2bsr}] [@b{-sifilter}] [@b{-relax}]
[@b{-mcpu=[210|340]}]
@end ifset
+@ifset METAG
+
+@emph{Target Meta options:}
+ [@b{-mcpu=@var{cpu}}] [@b{-mfpu=@var{cpu}}] [@b{-mdsp=@var{cpu}}]
+@end ifset
@ifset MICROBLAZE
@emph{Target MICROBLAZE options:}
@c MicroBlaze has no machine-dependent assembler options.
[@b{-g}[@var{debug level}]] [@b{-G} @var{num}] [@b{-KPIC}] [@b{-call_shared}]
[@b{-non_shared}] [@b{-xgot} [@b{-mvxworks-pic}]
[@b{-mabi}=@var{ABI}] [@b{-32}] [@b{-n32}] [@b{-64}] [@b{-mfp32}] [@b{-mgp32}]
+ [@b{-mfp64}] [@b{-mgp64}] [@b{-mfpxx}]
+ [@b{-modd-spreg}] [@b{-mno-odd-spreg}]
[@b{-march}=@var{CPU}] [@b{-mtune}=@var{CPU}] [@b{-mips1}] [@b{-mips2}]
[@b{-mips3}] [@b{-mips4}] [@b{-mips5}] [@b{-mips32}] [@b{-mips32r2}]
- [@b{-mips64}] [@b{-mips64r2}]
+ [@b{-mips32r3}] [@b{-mips32r5}] [@b{-mips32r6}] [@b{-mips64}] [@b{-mips64r2}]
+ [@b{-mips64r3}] [@b{-mips64r5}] [@b{-mips64r6}]
[@b{-construct-floats}] [@b{-no-construct-floats}]
+ [@b{-mnan=@var{encoding}}]
[@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}]
[@b{-mips16}] [@b{-no-mips16}]
[@b{-mmicromips}] [@b{-mno-micromips}]
[@b{-mdmx}] [@b{-no-mdmx}]
[@b{-mdsp}] [@b{-mno-dsp}]
[@b{-mdspr2}] [@b{-mno-dspr2}]
+ [@b{-mmsa}] [@b{-mno-msa}]
+ [@b{-mxpa}] [@b{-mno-xpa}]
[@b{-mmt}] [@b{-mno-mt}]
[@b{-mmcu}] [@b{-mno-mcu}]
+ [@b{-minsn32}] [@b{-mno-insn32}]
[@b{-mfix7000}] [@b{-mno-fix7000}]
+ [@b{-mfix-rm7000}] [@b{-mno-fix-rm7000}]
[@b{-mfix-vr4120}] [@b{-mno-fix-vr4120}]
[@b{-mfix-vr4130}] [@b{-mno-fix-vr4130}]
[@b{-mdebug}] [@b{-no-mdebug}]
[@b{--no-expand}] [@b{--no-merge-gregs}] [@b{-x}]
[@b{--linker-allocated-gregs}]
@end ifset
+@ifset NIOSII
+
+@emph{Target Nios II options:}
+ [@b{-relax-all}] [@b{-relax-section}] [@b{-no-relax}]
+ [@b{-EB}] [@b{-EL}]
+@end ifset
+@ifset NDS32
+
+@emph{Target NDS32 options:}
+ [@b{-EL}] [@b{-EB}] [@b{-O}] [@b{-Os}] [@b{-mcpu=@var{cpu}}]
+ [@b{-misa=@var{isa}}] [@b{-mabi=@var{abi}}] [@b{-mall-ext}]
+ [@b{-m[no-]16-bit}] [@b{-m[no-]perf-ext}] [@b{-m[no-]perf2-ext}]
+ [@b{-m[no-]string-ext}] [@b{-m[no-]dsp-ext}] [@b{-m[no-]mac}] [@b{-m[no-]div}]
+ [@b{-m[no-]audio-isa-ext}] [@b{-m[no-]fpu-sp-ext}] [@b{-m[no-]fpu-dp-ext}]
+ [@b{-m[no-]fpu-fma}] [@b{-mfpu-freg=@var{FREG}}] [@b{-mreduced-regs}]
+ [@b{-mfull-regs}] [@b{-m[no-]dx-regs}] [@b{-mpic}] [@b{-mno-relax}]
+ [@b{-mb2bb}]
+@end ifset
@ifset PDP11
@emph{Target PDP11 options:}
[@b{-mpwrx}|@b{-mpwr2}|@b{-mpwr}|@b{-m601}|@b{-mppc}|@b{-mppc32}|@b{-m603}|@b{-m604}|@b{-m403}|@b{-m405}|
@b{-m440}|@b{-m464}|@b{-m476}|@b{-m7400}|@b{-m7410}|@b{-m7450}|@b{-m7455}|@b{-m750cl}|@b{-mppc64}|
@b{-m620}|@b{-me500}|@b{-e500x2}|@b{-me500mc}|@b{-me500mc64}|@b{-me5500}|@b{-me6500}|@b{-mppc64bridge}|
- @b{-mbooke}|@b{-mpower4}|@b{-mpr4}|@b{-mpower5}|@b{-mpwr5}|@b{-mpwr5x}|@b{-mpower6}|@b{-mpwr6}|
- @b{-mpower7}|@b{-mpw7}|@b{-ma2}|@b{-mcell}|@b{-mspe}|@b{-mtitan}|@b{-me300}|@b{-mcom}]
- [@b{-many}] [@b{-maltivec}|@b{-mvsx}]
+ @b{-mbooke}|@b{-mpower4}|@b{-mpwr4}|@b{-mpower5}|@b{-mpwr5}|@b{-mpwr5x}|@b{-mpower6}|@b{-mpwr6}|
+ @b{-mpower7}|@b{-mpwr7}|@b{-mpower8}|@b{-mpwr8}|@b{-ma2}|@b{-mcell}|@b{-mspe}|@b{-mtitan}|@b{-me300}|@b{-mcom}]
+ [@b{-many}] [@b{-maltivec}|@b{-mvsx}|@b{-mhtm}|@b{-mvle}]
[@b{-mregnames}|@b{-mno-regnames}]
[@b{-mrelocatable}|@b{-mrelocatable-lib}|@b{-K PIC}] [@b{-memb}]
[@b{-mlittle}|@b{-mlittle-endian}|@b{-le}|@b{-mbig}|@b{-mbig-endian}|@b{-be}]
[@b{-msolaris}|@b{-mno-solaris}]
[@b{-nops=@var{count}}]
@end ifset
+@ifset RL78
+
+@emph{Target RL78 options:}
+ [@b{-mg10}]
+ [@b{-m32bit-doubles}|@b{-m64bit-doubles}]
+@end ifset
@ifset RX
@emph{Target RX options:}
[@b{-mlittle-endian}|@b{-mbig-endian}]
- [@b{-m32bit-ints}|@b{-m16bit-ints}]
[@b{-m32bit-doubles}|@b{-m64bit-doubles}]
+ [@b{-muse-conventional-section-names}]
+ [@b{-msmall-data-limit}]
+ [@b{-mpid}]
+ [@b{-mrelax}]
+ [@b{-mint-register=@var{number}}]
+ [@b{-mgcc-abi}|@b{-mrx-abi}]
@end ifset
@ifset S390
[@b{-mcpu=54[123589]}|@b{-mcpu=54[56]lp}] [@b{-mfar-mode}|@b{-mf}]
[@b{-merrors-to-file} @var{<filename>}|@b{-me} @var{<filename>}]
@end ifset
-
@ifset TIC6X
@emph{Target TIC6X options:}
@ifset TILEPRO
@c TILEPro has no machine-dependent assembler options
@end ifset
+@ifset VISIUM
+@emph{Target Visium options:}
+ [@b{-mtune=@var{arch}}]
+@end ifset
@ifset XTENSA
@emph{Target Xtensa options:}
[@b{--[no-]target-align}] [@b{--[no-]longcalls}]
[@b{--[no-]transform}]
[@b{--rename-section} @var{oldname}=@var{newname}]
+ [@b{--[no-]trampolines}]
@end ifset
-
@ifset Z80
@emph{Target Z80 options:}
[@b{ -forbid-undocumented-instructions}] [@b{-Fud}]
[@b{ -forbid-unportable-instructions}] [@b{-Fup}]
@end ifset
-
@ifset Z8000
+
@c Z8000 has no machine-dependent assembler options
@end ifset
may help debugging assembler code, if the debugger can handle it. Note---this
option is only supported by some targets, not all of them.
+@item --gdwarf-sections
+Instead of creating a .debug_line section, create a series of
+.debug_line.@var{foo} sections where @var{foo} is the name of the
+corresponding code section. For example a code section called @var{.text.func}
+will have its dwarf line number information placed into a section called
+@var{.debug_line.text.func}. If the code section is just called @var{.text}
+then debug line section will still be called just @var{.debug_line} without any
+suffix.
+
@item --size-check=error
@itemx --size-check=warning
Issue an error or warning for invalid ELF .size directive.
@end table
@c man end
+@ifset AARCH64
+
+@ifclear man
+@xref{AArch64 Options}, for the options available when @value{AS} is configured
+for the 64-bit mode of the ARM Architecture (AArch64).
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for the
+64-bit mode of the ARM Architecture (AArch64).
+@c man end
+@c man begin INCLUDE
+@include c-aarch64.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
@ifset ALPHA
@ifclear man
@item -mthumb-interwork
Specify that the code has been generated with interworking between Thumb and
ARM code in mind.
+@item -mccs
+Turns on CodeComposer Studio assembly syntax compatibility mode.
@item -k
Specify that PIC code has been generated.
@end table
@end ifset
+@ifset H8300
+
+@ifclear man
+@xref{H8/300 Options}, for the options available when @value{AS} is configured
+for an H8/300 processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for an H8/300
+processor.
+@c man end
+@c man begin INCLUDE
+@include c-h8300.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
@ifset I80386
@ifclear man
@end table
@end ifset
+@ifset NIOSII
+
+@ifclear man
+@xref{Nios II Options}, for the options available when @value{AS} is configured
+for an Altera Nios II processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for an
+Altera Nios II processor.
+@c man end
+@c man begin INCLUDE
+@include c-nios2.texi
+@c ended inside the included file
+@end ifset
+@end ifset
+
@ifset PDP11
For details about the PDP-11 machine dependent features options,
@table @gcctabopt
-@item -m68hc11 | -m68hc12 | -m68hcs12
+@item -m68hc11 | -m68hc12 | -m68hcs12 | -mm9s12x | -mm9s12xg
Specify what processor is the target. The default is
defined by the configuration option when building the assembler.
+@item --xgate-ramoffset
+Instruct the linker to offset RAM addresses from S12X address space into
+XGATE address space.
+
@item -mshort
Specify to use the 16-bit integer ABI.
Print the syntax of instruction in case of error.
@item --print-opcodes
-print the list of instructions with syntax and then exit.
+Print the list of instructions with syntax and then exit.
@item --generate-example
-print an example of instruction for each possible instruction and then exit.
+Print an example of instruction for each possible instruction and then exit.
This option is only useful for testing @command{@value{AS}}.
@end table
@ifset MIPS
The following options are available when @value{AS} is configured for
-a @sc{mips} processor.
+a MIPS processor.
@table @gcctabopt
@item -G @var{num}
@itemx -mips5
@itemx -mips32
@itemx -mips32r2
+@itemx -mips32r3
+@itemx -mips32r5
+@itemx -mips32r6
@itemx -mips64
@itemx -mips64r2
-Generate code for a particular @sc{mips} Instruction Set Architecture level.
+@itemx -mips64r3
+@itemx -mips64r5
+@itemx -mips64r6
+Generate code for a particular MIPS Instruction Set Architecture level.
@samp{-mips1} is an alias for @samp{-march=r3000}, @samp{-mips2} is an
alias for @samp{-march=r6000}, @samp{-mips3} is an alias for
@samp{-march=r4000} and @samp{-mips4} is an alias for @samp{-march=r8000}.
-@samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips64}, and
-@samp{-mips64r2}
-correspond to generic
-@samp{MIPS V}, @samp{MIPS32}, @samp{MIPS32 Release 2}, @samp{MIPS64},
-and @samp{MIPS64 Release 2}
-ISA processors, respectively.
+@samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips32r3},
+@samp{-mips32r5}, @samp{-mips32r6}, @samp{-mips64}, @samp{-mips64r2},
+@samp{-mips64r3}, @samp{-mips64r5}, and @samp{-mips64r6} correspond to generic
+MIPS V, MIPS32, MIPS32 Release 2, MIPS32 Release 3, MIPS32 Release 5, MIPS32
+Release 6, MIPS64, MIPS64 Release 2, MIPS64 Release 3, MIPS64 Release 5, and
+MIPS64 Release 6 ISA processors, respectively.
-@item -march=@var{CPU}
-Generate code for a particular @sc{mips} cpu.
+@item -march=@var{cpu}
+Generate code for a particular MIPS CPU.
@item -mtune=@var{cpu}
-Schedule and tune for a particular @sc{mips} cpu.
+Schedule and tune for a particular MIPS CPU.
@item -mfix7000
@itemx -mno-fix7000
Cause nops to be inserted if the read of the destination register
of an mfhi or mflo instruction occurs in the following two instructions.
+@item -mfix-rm7000
+@itemx -mno-fix-rm7000
+Cause nops to be inserted if a dmult or dmultu instruction is
+followed by a load instruction.
+
@item -mdebug
@itemx -no-mdebug
Cause stabs-style debugging output to go into an ECOFF-style .mdebug
all times. @samp{-mgp32} controls the size of general-purpose registers
and @samp{-mfp32} controls the size of floating-point registers.
+@item -mgp64
+@itemx -mfp64
+The register sizes are normally inferred from the ISA and ABI, but these
+flags force a certain group of registers to be treated as 64 bits wide at
+all times. @samp{-mgp64} controls the size of general-purpose registers
+and @samp{-mfp64} controls the size of floating-point registers.
+
+@item -mfpxx
+The register sizes are normally inferred from the ISA and ABI, but using
+this flag in combination with @samp{-mabi=32} enables an ABI variant
+which will operate correctly with floating-point registers which are
+32 or 64 bits wide.
+
+@item -modd-spreg
+@itemx -mno-odd-spreg
+Enable use of floating-point operations on odd-numbered single-precision
+registers when supported by the ISA. @samp{-mfpxx} implies
+@samp{-mno-odd-spreg}, otherwise the default is @samp{-modd-spreg}.
+
@item -mips16
@itemx -no-mips16
Generate code for the MIPS 16 processor. This is equivalent to putting
This tells the assembler to accept DSP Release 2 instructions.
@samp{-mno-dspr2} turns off this option.
+@item -mmsa
+@itemx -mno-msa
+Generate code for the MIPS SIMD Architecture Extension.
+This tells the assembler to accept MSA instructions.
+@samp{-mno-msa} turns off this option.
+
+@item -mxpa
+@itemx -mno-xpa
+Generate code for the MIPS eXtended Physical Address (XPA) Extension.
+This tells the assembler to accept XPA instructions.
+@samp{-mno-xpa} turns off this option.
+
@item -mmt
@itemx -mno-mt
Generate code for the MT Application Specific Extension.
This tells the assembler to accept MCU instructions.
@samp{-mno-mcu} turns off this option.
+@item -minsn32
+@itemx -mno-insn32
+Only use 32-bit instruction encodings when generating code for the
+microMIPS processor. This option inhibits the use of any 16-bit
+instructions. This is equivalent to putting @code{.set insn32} at
+the start of the assembly file. @samp{-mno-insn32} turns off this
+option. This is equivalent to putting @code{.set noinsn32} at the
+start of the assembly file. By default @samp{-mno-insn32} is
+selected, allowing all instructions to be used.
+
@item --construct-floats
@itemx --no-construct-floats
The @samp{--no-construct-floats} option disables the construction of
the double width register. By default @samp{--construct-floats} is
selected, allowing construction of these floating point constants.
+@item --relax-branch
+@itemx --no-relax-branch
+The @samp{--relax-branch} option enables the relaxation of out-of-range
+branches. By default @samp{--no-relax-branch} is selected, causing any
+out-of-range branches to produce an error.
+
+@item -mnan=@var{encoding}
+Select between the IEEE 754-2008 (@option{-mnan=2008}) or the legacy
+(@option{-mnan=legacy}) NaN encoding format. The latter is the default.
+
@cindex emulation
@item --emulation=@var{name}
-This option causes @command{@value{AS}} to emulate @command{@value{AS}} configured
-for some other target, in all respects, including output format (choosing
-between ELF and ECOFF only), handling of pseudo-opcodes which may generate
-debugging information or store symbol table information, and default
-endianness. The available configuration names are: @samp{mipsecoff},
-@samp{mipself}, @samp{mipslecoff}, @samp{mipsbecoff}, @samp{mipslelf},
-@samp{mipsbelf}. The first two do not alter the default endianness from that
-of the primary target for which the assembler was configured; the others change
-the default to little- or big-endian as indicated by the @samp{b} or @samp{l}
-in the name. Using @samp{-EB} or @samp{-EL} will override the endianness
-selection in any case.
-
-This option is currently supported only when the primary target
-@command{@value{AS}} is configured for is a @sc{mips} ELF or ECOFF target.
-Furthermore, the primary target or others specified with
-@samp{--enable-targets=@dots{}} at configuration time must include support for
-the other format, if both are to be available. For example, the Irix 5
-configuration includes support for both.
-
-Eventually, this option will support more configurations, with more
-fine-grained control over the assembler's behavior, and will be supported for
-more processors.
+This option was formerly used to switch between ELF and ECOFF output
+on targets like IRIX 5 that supported both. MIPS ECOFF support was
+removed in GAS 2.24, so the option now serves little purpose.
+It is retained for backwards compatibility.
+
+The available configuration names are: @samp{mipself}, @samp{mipslelf} and
+@samp{mipsbelf}. Choosing @samp{mipself} now has no effect, since the output
+is always ELF. @samp{mipslelf} and @samp{mipsbelf} select little- and
+big-endian output respectively, but @samp{-EL} and @samp{-EB} are now the
+preferred options instead.
@item -nocpp
@command{@value{AS}} ignores this option. It is accepted for compatibility with
Assemble for a little endian target.
@end table
+@end ifset
+@c man end
+
+@ifset METAG
+
+@ifclear man
+@xref{Meta Options}, for the options available when @value{AS} is configured
+for a Meta processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+Meta processor.
+@c man end
+@c man begin INCLUDE
+@include c-metag.texi
+@c ended inside the included file
+@end ifset
+
@end ifset
+@c man begin OPTIONS
@ifset MMIX
See the info pages for documentation of the MMIX-specific options.
@end ifset
+@ifset NDS32
+
+@ifclear man
+@xref{NDS32 Options}, for the options available when @value{AS} is configured
+for a NDS32 processor.
+@end ifclear
+@c ended inside the included file
+@end ifset
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+NDS32 processor.
+@c man end
+@c man begin INCLUDE
+@include c-nds32.texi
+@c ended inside the included file
+@end ifset
+
@c man end
@ifset PPC
Architecture (esa) or the z/Architecture mode (zarch).
@item -march=@var{processor}
Specify which s390 processor variant is the target, @samp{g6}, @samp{g6},
-@samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, or @samp{z10}.
+@samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, @samp{z10},
+@samp{z196}, @samp{zEC12}, or @samp{z13}.
@item -mregnames
@itemx -mno-regnames
Allow or disallow symbolic names for registers.
@end ifset
+@ifset VISIUM
+
+@ifclear man
+@xref{Visium Options}, for the options available when @value{AS} is configured
+for a Visium processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following option is available when @value{AS} is configured for a Visium
+processor.
+@c man end
+@c man begin INCLUDE
+@include c-visium.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
@ifset XTENSA
@ifclear man
are noted in @ref{Machine Dependencies}.
@end ifset
No symbol may begin with a digit. Case is significant.
-There is no length limit: all characters are significant. Symbols are
-delimited by characters not in that set, or by the beginning of a file
-(since the source program must end with a newline, the end of a file is
-not a possible symbol delimiter). @xref{Symbols}.
+There is no length limit: all characters are significant. Multibyte characters
+are supported. Symbols are delimited by characters not in that set, or by the
+beginning of a file (since the source program must end with a newline, the end
+of a file is not a possible symbol delimiter). @xref{Symbols}.
@cindex length of symbols
@node Statements
Case of letters is significant: @code{foo} is a different symbol name
than @code{Foo}.
+Multibyte characters are supported. To generate a symbol name containing
+multibyte characters enclose it within double quotes and use escape codes. cf
+@xref{Strings}. Generating a multibyte symbol name from a label is not
+currently supported.
+
Each symbol has exactly one name. Each name in an assembly language program
refers to exactly one symbol. You may use that symbol name any number of times
in a program.
with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
-For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32,
+For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or1k,
s390, sparc, tic4x, tic80 and xtensa, the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
@cindex bundle
@cindex instruction bundle
@cindex aligned instruction bundle
-@code{.bundle_align_mode} enables or disables @defn{aligned instruction
+@code{.bundle_align_mode} enables or disables @dfn{aligned instruction
bundle} mode. In this mode, sequences of adjacent instructions are grouped
-into fixed-sized @defn{bundles}. If the argument is zero, this mode is
+into fixed-sized @dfn{bundles}. If the argument is zero, this mode is
disabled (which is the default state). If the argument it not zero, it
gives the size of an instruction bundle as a power of two (as for the
@code{.p2align} directive, @pxref{P2align}).
For some targets, it's an ABI requirement that no instruction may span a
-certain aligned boundary. A @defn{bundle} is simply a sequence of
+certain aligned boundary. A @dfn{bundle} is simply a sequence of
instructions that starts on an aligned boundary. For example, if
@var{abs-expr} is @code{5} then the bundle size is 32, so each aligned
chunk of 32 bytes is a bundle. When aligned instruction bundle mode is in
For some targets, it's an ABI requirement that certain instructions may
appear only as part of specified permissible sequences of multiple
instructions, all within the same bundle. A pair of @code{.bundle_lock}
-and @code{.bundle_unlock} directives define a @defn{bundle-locked}
+and @code{.bundle_unlock} directives define a @dfn{bundle-locked}
instruction sequence. For purposes of aligned instruction bundle mode, a
sequence starting with @code{.bundle_lock} and ending with
@code{.bundle_unlock} is treated as a single instruction. That is, the
aligned bundle boundary. It's an error if the sequence is longer than the
bundle size.
-Bundle-locked sequences do not nest. It's an error if two
-@code{.bundle_lock} directives appear without an intervening
-@code{.bundle_unlock} directive.
+For convenience when using @code{.bundle_lock} and @code{.bundle_unlock}
+inside assembler macros (@pxref{Macro}), bundle-locked sequences may be
+nested. That is, a second @code{.bundle_lock} directive before the next
+@code{.bundle_unlock} directive has no effect except that it must be
+matched by another closing @code{.bundle_unlock} so that there is the
+same number of @code{.bundle_lock} and @code{.bundle_unlock} directives.
@node Byte
@section @code{.byte @var{expressions}}
writable section
@item d
data section
+@item e
+exclude section from linking
@item r
read-only section
@item x
@item
0 for files not affected by the floating-point ABI.
@item
-1 for files using the hardware floating-point with a standard double-precision
-FPU.
+1 for files using the hardware floating-point ABI with a standard
+double-precision FPU.
@item
2 for files using the hardware floating-point ABI with a single-precision FPU.
@item
3 for files using the software floating-point ABI.
@item
-4 for files using the hardware floating-point ABI with 64-bit wide
-double-precision floating-point registers and 32-bit wide general
-purpose registers.
+4 for files using the deprecated hardware floating-point ABI which used 64-bit
+floating-point registers, 32-bit general-purpose registers and increased the
+number of callee-saved floating-point registers.
+@item
+5 for files using the hardware floating-point ABI with a double-precision FPU
+with either 32-bit or 64-bit floating-point registers and 32-bit
+general-purpose registers.
+@item
+6 for files using the hardware floating-point ABI with 64-bit floating-point
+registers and 32-bit general-purpose registers.
+@item
+7 for files using the hardware floating-point ABI with 64-bit floating-point
+registers, 32-bit general-purpose registers and a rule that forbids the
+direct use of odd-numbered single-precision floating-point registers.
@end itemize
@end table
subject, see the hardware manufacturer's manual.
@menu
+@ifset AARCH64
+* AArch64-Dependent:: AArch64 Dependent Features
+@end ifset
@ifset ALPHA
* Alpha-Dependent:: Alpha Dependent Features
@end ifset
@ifset M68HC11
* M68HC11-Dependent:: M68HC11 and 68HC12 Dependent Features
@end ifset
+@ifset METAG
+* Meta-Dependent :: Meta Dependent Features
+@end ifset
@ifset MICROBLAZE
* MicroBlaze-Dependent:: MICROBLAZE Dependent Features
@end ifset
@ifset MSP430
* MSP430-Dependent:: MSP430 Dependent Features
@end ifset
+@ifset NDS32
+* NDS32-Dependent:: Andes NDS32 Dependent Features
+@end ifset
+@ifset NIOSII
+* NiosII-Dependent:: Altera Nios II Dependent Features
+@end ifset
@ifset NS32K
* NS32K-Dependent:: NS32K Dependent Features
@end ifset
@ifset V850
* V850-Dependent:: V850 Dependent Features
@end ifset
+@ifset VAX
+* Vax-Dependent:: VAX Dependent Features
+@end ifset
+@ifset VISIUM
+* Visium-Dependent:: Visium Dependent Features
+@end ifset
+@ifset XGATE
+* XGATE-Dependent:: XGATE Features
+@end ifset
@ifset XSTORMY16
* XSTORMY16-Dependent:: XStormy16 Dependent Features
@end ifset
@ifset Z8000
* Z8000-Dependent:: Z8000 Dependent Features
@end ifset
-@ifset VAX
-* Vax-Dependent:: VAX Dependent Features
-@end ifset
@end menu
@lowersections
@c node and sectioning commands; hence the repetition of @chapter BLAH
@c in both conditional blocks.
+@ifset AARCH64
+@include c-aarch64.texi
+@end ifset
+
@ifset ALPHA
@include c-alpha.texi
@end ifset
@include c-m68hc11.texi
@end ifset
+@ifset METAG
+@include c-metag.texi
+@end ifset
+
@ifset MICROBLAZE
@include c-microblaze.texi
@end ifset
@include c-msp430.texi
@end ifset
+@ifset NDS32
+@include c-nds32.texi
+@end ifset
+
+@ifset NIOSII
+@include c-nios2.texi
+@end ifset
+
@ifset NS32K
@include c-ns32k.texi
@end ifset
@include c-tilepro.texi
@end ifset
-@ifset Z80
-@include c-z80.texi
-@end ifset
-
-@ifset Z8000
-@include c-z8k.texi
+@ifset V850
+@include c-v850.texi
@end ifset
@ifset VAX
@include c-vax.texi
@end ifset
-@ifset V850
-@include c-v850.texi
+@ifset VISIUM
+@include c-visium.texi
+@end ifset
+
+@ifset XGATE
+@include c-xgate.texi
@end ifset
@ifset XSTORMY16
@include c-xtensa.texi
@end ifset
+@ifset Z80
+@include c-z80.texi
+@end ifset
+
+@ifset Z8000
+@include c-z8k.texi
+@end ifset
+
@ifset GENERIC
@c reverse effect of @down at top of generic Machine-Dep chapter
@raisesections
If you have contributed to GAS and your name isn't listed here,
it is not meant as a slight. We just don't know about it. Send mail to the
maintainer, and we'll correct the situation. Currently
-@c (January 1994),
-the maintainer is Ken Raeburn (email address @code{raeburn@@cygnus.com}).
+@c (October 2012),
+the maintainer is Nick Clifton (email address @code{nickc@@redhat.com}).
Dean Elsner wrote the original @sc{gnu} assembler for the VAX.@footnote{Any
more details?}