Series Programming Manual} (Renesas M21T001).
@end ifset
@ifset SH
-For information on the Renesas (formerly Hitachi) SH machine instruction set,
-see @cite{SH-Microcomputer User's Manual} (Renesas).
+For information on the Renesas (formerly Hitachi) / SuperH SH machine instruction set,
+see @cite{SH-Microcomputer User's Manual} (Renesas) or
+@cite{SH-4 32-bit CPU Core Architecture} (SuperH) and
+@cite{SuperH (SH) 64-Bit RISC Series} (SuperH).
@end ifset
@ifset Z8000
For information on the Z8000 machine instruction set, see @cite{Z8000 CPU Technical Manual}
@samp{;} for Motorola PowerPC;
@end ifset
@ifset SH
-@samp{!} for the Renesas SH;
+@samp{!} for the Renesas / SuperH SH;
@end ifset
@ifset SPARC
@samp{!} on the SPARC;
@end ignore
On the H8/300, H8/500,
-Renesas SH,
+Renesas / SuperH SH,
and AMD 29K architectures, the letter must be
one of the letters @samp{DFPRSX} (in upper or lower case).
the proper run-time addresses.
@ifset H8
For the H8/300 and H8/500,
-and for the Renesas SH,
+and for the Renesas / SuperH SH,
@command{@value{AS}} pads sections if needed to
ensure they end on a word (sixteen bit) boundary.
@end ifset
with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
-For the a29k, hppa, m68k, m88k, w65, sparc, Xtensa, and Renesas SH, and i386 using ELF
-format,
+For the a29k, hppa, m68k, m88k, w65, sparc, Xtensa, and Renesas / SuperH SH,
+and i386 using ELF format,
the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
* MSP430-Dependent:: MSP430 Dependent Features
@end ifset
@ifset SH
-* SH-Dependent:: Renesas SH Dependent Features
-* SH64-Dependent:: Renesas SH64 Dependent Features
+* SH-Dependent:: Renesas / SuperH SH Dependent Features
+* SH64-Dependent:: SuperH SH64 Dependent Features
@end ifset
@ifset PDP11
* PDP-11-Dependent:: PDP-11 Dependent Features