-@c Copyright (C) 2009-2015 Free Software Foundation, Inc.
+@c Copyright (C) 2009-2017 Free Software Foundation, Inc.
@c Contributed by ARM Ltd.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
This option specifies the target processor. The assembler will issue an error
message if an attempt is made to assemble an instruction which will not execute
on the target processor. The following processor names are recognized:
+@code{cortex-a35},
@code{cortex-a53},
+@code{cortex-a55},
@code{cortex-a57},
+@code{cortex-a72},
+@code{cortex-a73},
+@code{cortex-a75},
+@code{exynos-m1},
+@code{falkor},
+@code{qdf24xx},
+@code{saphira},
@code{thunderx},
+@code{vulcan},
@code{xgene1}
and
@code{xgene2}.
This option specifies the target architecture. The assembler will
issue an error message if an attempt is made to assemble an
instruction which will not execute on the target architecture. The
-only value for @var{architecture} is @code{armv8-a}.
+following architecture names are recognized: @code{armv8-a},
+@code{armv8.1-a}, @code{armv8.2-a}, @code{armv8.3-a} and @code{armv8.4-a}.
If both @option{-mcpu} and @option{-march} are specified, the
assembler will use the setting for @option{-mcpu}. If neither are
@multitable @columnfractions .12 .17 .17 .54
@headitem Extension @tab Minimum Architecture @tab Enabled by default
@tab Description
-@item @code{crc} @tab ARMv8-A @tab No
+@item @code{compnum} @tab ARMv8.2-A @tab ARMv8.3-A or later
+ @tab Enable the complex number SIMD extensions. This implies
+ @code{fp16} and @code{simd}.
+@item @code{crc} @tab ARMv8-A @tab ARMv8.1-A or later
@tab Enable CRC instructions.
@item @code{crypto} @tab ARMv8-A @tab No
- @tab Enable cryptographic extensions. This implies @code{fp} and @code{simd}.
+ @tab Enable cryptographic extensions. This implies @code{fp}, @code{simd}, @code{aes} and @code{sha2}.
+@item @code{aes} @tab ARMv8-A @tab No
+ @tab Enable the AES cryptographic extensions. This implies @code{fp} and @code{simd}.
+@item @code{sha2} @tab ARMv8-A @tab No
+ @tab Enable the SHA2 cryptographic extensions. This implies @code{fp} and @code{simd}.
+@item @code{sha3} @tab ARMv8.2-A @tab No
+ @tab Enable the ARMv8.2-A SHA2 and SHA3 cryptographic extensions. This implies @code{fp}, @code{simd} and @code{sha2}.
+@item @code{sm4} @tab ARMv8.2-A @tab No
+ @tab Enable the ARMv8.2-A SM3 and SM4 cryptographic extensions. This implies @code{fp} and @code{simd}.
@item @code{fp} @tab ARMv8-A @tab ARMv8-A or later
@tab Enable floating-point extensions.
+@item @code{fp16} @tab ARMv8.2-A @tab ARMv8.2-A or later
+ @tab Enable ARMv8.2 16-bit floating-point support. This implies
+ @code{fp}.
+@item @code{lor} @tab ARMv8-A @tab ARMv8.1-A or later
+ @tab Enable Limited Ordering Regions extensions.
+@item @code{lse} @tab ARMv8-A @tab ARMv8.1-A or later
+ @tab Enable Large System extensions.
+@item @code{pan} @tab ARMv8-A @tab ARMv8.1-A or later
+ @tab Enable Privileged Access Never support.
+@item @code{profile} @tab ARMv8.2-A @tab No
+ @tab Enable statistical profiling extensions.
+@item @code{ras} @tab ARMv8-A @tab ARMv8.2-A or later
+ @tab Enable the Reliability, Availability and Serviceability
+ extension.
+@item @code{rcpc} @tab ARMv8.2-A @tab ARMv8.3-A or later
+ @tab Enable the weak release consistency extension.
+@item @code{rdma} @tab ARMv8-A @tab ARMv8.1-A or later
+ @tab Enable ARMv8.1 Advanced SIMD extensions. This implies @code{simd}.
@item @code{simd} @tab ARMv8-A @tab ARMv8-A or later
@tab Enable Advanced SIMD extensions. This implies @code{fp}.
+@item @code{sve} @tab ARMv8.2-A @tab No
+ @tab Enable the Scalable Vector Extensions. This implies @code{fp16},
+ @code{simd} and @code{compnum}.
+@item @code{dotprod} @tab ARMv8.2-A @tab ARMv8.4-A or later
+ @tab Enable the Dot Product extension. This implies @code{simd}.
+@item @code{fp16fml} @tab ARMv8.2-A @tab ARMv8.4-A or later
+ @tab Enable ARMv8.2 16-bit floating-point multiplication variant support.
+ This implies @code{fp16}.
@end multitable
@node AArch64 Syntax
This directive switches to the @code{.bss} section.
@c CCCCCCCCCCCCCCCCCCCCCCCCCC
+
+@cindex @code{.cpu} directive, AArch64
+@item .cpu @var{name}
+Set the target processor. Valid values for @var{name} are the same as
+those accepted by the @option{-mcpu=} command line option.
+
@c DDDDDDDDDDDDDDDDDDDDDDDDDD
+
+@cindex @code{.dword} directive, AArch64
+@item .dword @var{expressions}
+The @code{.dword} directive produces 64 bit values.
+
@c EEEEEEEEEEEEEEEEEEEEEEEEEE
+
+@cindex @code{.even} directive, AArch64
+@item .even
+The @code{.even} directive aligns the output on the next even byte
+boundary.
+
@c FFFFFFFFFFFFFFFFFFFFFFFFFF
@c GGGGGGGGGGGGGGGGGGGGGGGGGG
@c HHHHHHHHHHHHHHHHHHHHHHHHHH
@c IIIIIIIIIIIIIIIIIIIIIIIIII
+
+@cindex @code{.inst} directive, AArch64
+@item .inst @var{expressions}
+Inserts the expressions into the output as if they were instructions,
+rather than data.
+
@c JJJJJJJJJJJJJJJJJJJJJJJJJJ
@c KKKKKKKKKKKKKKKKKKKKKKKKKK
@c LLLLLLLLLLLLLLLLLLLLLLLLLL
foo .req w0
@end smallexample
+ip0, ip1, lr and fp are automatically defined to
+alias to X16, X17, X30 and X29 respectively.
+
@c SSSSSSSSSSSSSSSSSSSSSSSSSS
@c TTTTTTTTTTTTTTTTTTTTTTTTTT
+@cindex @code{.tlsdescadd} directive, AArch64
+@item @code{.tlsdescadd}
+Emits a TLSDESC_ADD reloc on the next instruction.
+
+@cindex @code{.tlsdesccall} directive, AArch64
+@item @code{.tlsdesccall}
+Emits a TLSDESC_CALL reloc on the next instruction.
+
+@cindex @code{.tlsdescldr} directive, AArch64
+@item @code{.tlsdescldr}
+Emits a TLSDESC_LDR reloc on the next instruction.
+
@c UUUUUUUUUUUUUUUUUUUUUUUUUU
@cindex @code{.unreq} directive, AArch64
@c WWWWWWWWWWWWWWWWWWWWWWWWWW
@c XXXXXXXXXXXXXXXXXXXXXXXXXX
+
+@cindex @code{.xword} directive, AArch64
+@item .xword @var{expressions}
+The @code{.xword} directive produces 64 bit values. This is the same
+as the @code{.dword} directive.
+
@c YYYYYYYYYYYYYYYYYYYYYYYYYY
@c ZZZZZZZZZZZZZZZZZZZZZZZZZZ
projects / deliverable / binutils-gdb.git / blobdiff