* MIPS option stack:: Directives to save and restore options
* MIPS ASE instruction generation overrides:: Directives to control
generation of MIPS ASE instructions
+* MIPS floating-point:: Directives to override floating-point options
@end menu
@node MIPS Opts
tools, which must be configured for one or the other). Use @samp{-EB}
to select big-endian output, and @samp{-EL} for little-endian.
+@item -KPIC
+@cindex PIC selection, MIPS
+@cindex @option{-KPIC} option, MIPS
+Generate SVR4-style PIC. This option tells the assembler to generate
+SVR4-style position-independent macro expansions. It also tells the
+assembler to mark the output file as PIC.
+
+@item -mvxworks-pic
+@cindex @option{-mvxworks-pic} option, MIPS
+Generate VxWorks PIC. This option tells the assembler to generate
+VxWorks-style position-independent macro expansions.
+
@cindex MIPS architecture options
@item -mips1
@itemx -mips2
all times. @samp{-mgp32} controls the size of general-purpose registers
and @samp{-mfp32} controls the size of floating-point registers.
+The @code{.set gp=32} and @code{.set fp=32} directives allow the size
+of registers to be changed for parts of an object. The default value is
+restored by @code{.set gp=default} and @code{.set fp=default}.
+
On some MIPS variants there is a 32-bit mode flag; when this flag is
set, 64-bit instructions generate a trap. Also, some 32-bit OSes only
save the 32-bit registers on a context switch, so it is essential never
to use the 64-bit registers.
@item -mgp64
-Assume that 64-bit general purpose registers are available. This is
-provided in the interests of symmetry with -gp32.
+@itemx -mfp64
+Assume that 64-bit registers are available. This is provided in the
+interests of symmetry with @samp{-mgp32} and @samp{-mfp32}.
+
+The @code{.set gp=64} and @code{.set fp=64} directives allow the size
+of registers to be changed for parts of an object. The default value is
+restored by @code{.set gp=default} and @code{.set fp=default}.
@item -mips16
@itemx -no-mips16
Generate code for the MIPS 16 processor. This is equivalent to putting
-@samp{.set mips16} at the start of the assembly file. @samp{-no-mips16}
+@code{.set mips16} at the start of the assembly file. @samp{-no-mips16}
turns off this option.
+@item -msmartmips
+@itemx -mno-smartmips
+Enables the SmartMIPS extensions to the MIPS32 instruction set, which
+provides a number of new instructions which target smartcard and
+cryptographic applications. This is equivalent to putting
+@code{.set smartmips} at the start of the assembly file.
+@samp{-mno-smartmips} turns off this option.
+
@item -mips3d
@itemx -no-mips3d
Generate code for the MIPS-3D Application Specific Extension.
This tells the assembler to accept MDMX instructions.
@samp{-no-mdmx} turns off this option.
+@item -mdsp
+@itemx -mno-dsp
+Generate code for the DSP Release 1 Application Specific Extension.
+This tells the assembler to accept DSP Release 1 instructions.
+@samp{-mno-dsp} turns off this option.
+
+@item -mdspr2
+@itemx -mno-dspr2
+Generate code for the DSP Release 2 Application Specific Extension.
+This option implies -mdsp.
+This tells the assembler to accept DSP Release 2 instructions.
+@samp{-mno-dspr2} turns off this option.
+
+@item -mmt
+@itemx -mno-mt
+Generate code for the MT Application Specific Extension.
+This tells the assembler to accept MT instructions.
+@samp{-mno-mt} turns off this option.
+
@item -mfix7000
@itemx -mno-fix7000
Cause nops to be inserted if the read of the destination register
intended to be used on GCC-generated code: it is not designed to catch
all problems in hand-written assembler code.
+@item -mfix-vr4130
+@itemx -no-mfix-vr4130
+Insert nops to work around the VR4130 @samp{mflo}/@samp{mfhi} errata.
+
@item -m4010
@itemx -no-m4010
Generate code for the LSI @sc{r4010} chip. This tells the assembler to
rm9000,
10000,
12000,
-mips32-4k,
-sb1
+4kc,
+4km,
+4kp,
+4ksc,
+4kec,
+4kem,
+4kep,
+4ksd,
+m4k,
+m4kp,
+24kc,
+24kf2_1,
+24kf,
+24kf1_1,
+24kec,
+24kef2_1,
+24kef,
+24kef1_1,
+34kc,
+34kf2_1,
+34kf,
+34kf1_1,
+74kc,
+74kf2_1,
+74kf,
+74kf1_1,
+74kf3_2,
+5kc,
+5kf,
+20kc,
+25kf,
+sb1,
+sb1a,
+loongson2e,
+loongson2f,
+octeon
@end quotation
+For compatibility reasons, @samp{@var{n}x} and @samp{@var{b}fx} are
+accepted as synonyms for @samp{@var{n}f1_1}. These values are
+deprecated.
+
@item -mtune=@var{cpu}
Schedule and tune for a particular MIPS cpu. Valid @var{cpu} values are
identical to @samp{-march=@var{cpu}}.
@sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the
@sc{gnu} assembler itself never runs the C preprocessor.
+@item -msoft-float
+@itemx -mhard-float
+Disable or enable floating-point instructions. Note that by default
+floating-point instructions are always allowed even with CPU targets
+that don't have support for these instructions.
+
+@item -msingle-float
+@itemx -mdouble-float
+Disable or enable double-precision floating-point operations. Note
+that by default double-precision floating-point operations are always
+allowed even with CPU targets that don't have support for these
+operations.
+
@item --construct-floats
@itemx --no-construct-floats
-@cindex --construct-floats
-@cindex --no-construct-floats
The @code{--no-construct-floats} option disables the construction of
double width floating point constants by loading the two halves of the
value into the two single width floating point registers that make up
are permitted, but also how certain macros are expanded. @code{.set
mips0} restores the @sc{isa} level to its original level: either the
level you selected with command line options, or the default for your
-configuration. You can use this feature to permit specific @sc{r4000}
+configuration. You can use this feature to permit specific @sc{mips3}
instructions while assembling in 32 bit mode. Use this directive with
care!
-The directive @samp{.set mips16} puts the assembler into MIPS 16 mode,
+@cindex MIPS CPU override
+@kindex @code{.set arch=@var{cpu}}
+The @code{.set arch=@var{cpu}} directive provides even finer control.
+It changes the effective CPU target and allows the assembler to use
+instructions specific to a particular CPU. All CPUs supported by the
+@samp{-march} command line option are also selectable by this directive.
+The original value is restored by @code{.set arch=default}.
+
+The directive @code{.set mips16} puts the assembler into MIPS 16 mode,
in which it will assemble instructions for the MIPS 16 processor. Use
-@samp{.set nomips16} to return to normal 32 bit mode.
+@code{.set nomips16} to return to normal 32 bit mode.
Traditional @sc{mips} assemblers do not support this directive.
@kindex @code{.set autoextend}
@kindex @code{.set noautoextend}
By default, MIPS 16 instructions are automatically extended to 32 bits
-when necessary. The directive @samp{.set noautoextend} will turn this
-off. When @samp{.set noautoextend} is in effect, any 32 bit instruction
-must be explicitly extended with the @samp{.e} modifier (e.g.,
-@samp{li.e $4,1000}). The directive @samp{.set autoextend} may be used
+when necessary. The directive @code{.set noautoextend} will turn this
+off. When @code{.set noautoextend} is in effect, any 32 bit instruction
+must be explicitly extended with the @code{.e} modifier (e.g.,
+@code{li.e $4,1000}). The directive @code{.set autoextend} may be used
to once again automatically extend instructions when necessary.
This directive is only meaningful when in MIPS 16 mode. Traditional
in the assembly. The @code{.set nomips3d} directive prevents MIPS-3D
instructions from being accepted.
+@cindex SmartMIPS instruction generation override
+@kindex @code{.set smartmips}
+@kindex @code{.set nosmartmips}
+The directive @code{.set smartmips} makes the assembler accept
+instructions from the SmartMIPS Application Specific Extension to the
+MIPS32 @sc{isa} from that point on in the assembly. The
+@code{.set nosmartmips} directive prevents SmartMIPS instructions from
+being accepted.
+
@cindex MIPS MDMX instruction generation override
@kindex @code{.set mdmx}
@kindex @code{.set nomdmx}
in the assembly. The @code{.set nomdmx} directive prevents MDMX
instructions from being accepted.
+@cindex MIPS DSP Release 1 instruction generation override
+@kindex @code{.set dsp}
+@kindex @code{.set nodsp}
+The directive @code{.set dsp} makes the assembler accept instructions
+from the DSP Release 1 Application Specific Extension from that point
+on in the assembly. The @code{.set nodsp} directive prevents DSP
+Release 1 instructions from being accepted.
+
+@cindex MIPS DSP Release 2 instruction generation override
+@kindex @code{.set dspr2}
+@kindex @code{.set nodspr2}
+The directive @code{.set dspr2} makes the assembler accept instructions
+from the DSP Release 2 Application Specific Extension from that point
+on in the assembly. This dirctive implies @code{.set dsp}. The
+@code{.set nodspr2} directive prevents DSP Release 2 instructions from
+being accepted.
+
+@cindex MIPS MT instruction generation override
+@kindex @code{.set mt}
+@kindex @code{.set nomt}
+The directive @code{.set mt} makes the assembler accept instructions
+from the MT Application Specific Extension from that point on
+in the assembly. The @code{.set nomt} directive prevents MT
+instructions from being accepted.
+
+Traditional @sc{mips} assemblers do not support these directives.
+
+@node MIPS floating-point
+@section Directives to override floating-point options
+
+@cindex Disable floating-point instructions
+@kindex @code{.set softfloat}
+@kindex @code{.set hardfloat}
+The directives @code{.set softfloat} and @code{.set hardfloat} provide
+finer control of disabling and enabling float-point instructions.
+These directives always override the default (that hard-float
+instructions are accepted) or the command-line options
+(@samp{-msoft-float} and @samp{-mhard-float}).
+
+@cindex Disable single-precision floating-point operations
+@kindex @code{.set softfloat}
+@kindex @code{.set hardfloat}
+The directives @code{.set singlefloat} and @code{.set doublefloat}
+provide finer control of disabling and enabling double-precision
+float-point operations. These directives always override the default
+(that double-precision operations are accepted) or the command-line
+options (@samp{-msingle-float} and @samp{-mdouble-float}).
+
Traditional @sc{mips} assemblers do not support these directives.
projects / deliverable / binutils-gdb.git / blobdiff