@kindex --text-section-literals
@kindex --no-text-section-literals
Control the treatment of literal pools. The default is
-@samp{--no-@-text-@-section-@-literals}, which places literals in a
-separate section in the output file. This allows the literal pool to be
+@samp{--no-@-text-@-section-@-literals}, which places literals in
+separate sections in the output file. This allows the literal pool to be
placed in a data RAM/ROM. With @samp{--text-@-section-@-literals}, the
literals are interspersed in the text section in order to keep them as
close as possible to their references. This may be necessary for large
@code{L32R} instructions in the text section. These options only affect
literals referenced via PC-relative @code{L32R} instructions; literals
for absolute mode @code{L32R} instructions are handled separately.
+@xref{Literal Directive, ,literal}.
@item --absolute-literals | --no-absolute-literals
@kindex --absolute-literals
braces:
@smallexample
+@group
@{
[@var{format}]
@var{opcode0} [@var{operands}]
+@end group
@var{opcode1} [@var{operands}]
+@group
@var{opcode2} [@var{operands}]
@dots{}
@}
+@end group
@end smallexample
The opcodes in a FLIX instruction are listed in the same order as the
@node Xtensa Automatic Alignment
@subsection Automatic Instruction Alignment
@cindex alignment of @code{LOOP} instructions
-@cindex alignment of @code{ENTRY} instructions
@cindex alignment of branch targets
@cindex @code{LOOP} instructions, alignment
-@cindex @code{ENTRY} instructions, alignment
@cindex branch target alignment
The Xtensa assembler will automatically align certain instructions, both
fetch width when aligning @code{LOOP} instructions (except if the first
instruction in the loop is a 64-bit instruction).
-Similarly, the @code{ENTRY} instruction must be aligned on a 0 mod 4
-byte boundary. The assembler satisfies this requirement by inserting
-zero bytes when required. In addition, labels immediately preceding the
-@code{ENTRY} instruction will be moved to the newly aligned instruction
-location.
+Previous versions of the assembler automatically aligned @code{ENTRY}
+instructions to 4-byte boundaries, but that alignment is now the
+programmer's responsibility.
@node Xtensa Relaxation
@section Xtensa Relaxation
may result in:
@smallexample
+@group
bnez.n a2, M
j L
M:
+@end group
@end smallexample
(The @code{BNEZ.N} instruction would be used in this example only if the
might be relaxed to:
@smallexample
+@group
.literal .L1, func
l32r a8, .L1
callx8 a8
+@end group
@end smallexample
Because the addresses of targets of function calls are not generally
is assembled into the following machine code:
@smallexample
+@group
.literal .L1, 100000
l32r a0, .L1
+@end group
@end smallexample
@cindex @code{L8UI} instructions, relaxation
is translated to:
@smallexample
+@group
.literal .L1, 2040
l32r a1, .L1
+@end group
+@group
addi a1, a0, a1
l32i a1, a1, 0
+@end group
@end smallexample
@noindent
For example:
@smallexample
+@group
addi a5, a6, 0
addi a5, a6, 512
+@end group
+@group
addi a5, a6, 513
addi a5, a6, 50000
+@end group
@end smallexample
is assembled into the following:
@smallexample
+@group
.literal .L1, 50000
mov.n a5, a6
+@end group
addmi a5, a6, 0x200
addmi a5, a6, 0x200
addi a5, a5, 1
+@group
l32r a5, .L1
add a5, a6, a5
+@end group
@end smallexample
@node Xtensa Directives
The Xtensa assembler supports a region-based directive syntax:
@smallexample
+@group
.begin @var{directive} [@var{options}]
@dots{}
.end @var{directive}
+@end group
@end smallexample
All the Xtensa-specific directives that apply to a region of code use
outer state. For example, consider:
@smallexample
+@group
.begin no-transform
L: add a0, a1, a2
+@end group
.begin transform
M: add a0, a1, a2
.end transform
+@group
N: add a0, a1, a2
.end no-transform
+@end group
@end smallexample
The @code{ADD} opcodes at @code{L} and @code{N} in the outer
Tensilica's assembler.
@smallexample
+@group
.begin [no-]schedule
.end [no-]schedule
+@end group
@end smallexample
This directive is ignored and has no effect on @command{@value{AS}}.
relaxation. @xref{Xtensa Call Relaxation, ,Function Call Relaxation}.
@smallexample
+@group
.begin [no-]longcalls
.end [no-]longcalls
+@end group
@end smallexample
Call relaxation is disabled by default unless the @samp{--longcalls}
optimization (@pxref{Xtensa Optimizations, ,Xtensa Optimizations}).
@smallexample
+@group
.begin [no-]transform
.end [no-]transform
+@end group
@end smallexample
Transformations are enabled by default unless the @samp{--no-transform}
identical literals. For example, the code:
@smallexample
+@group
entry sp, 40
.literal .L1, sym
l32r a4, .L1
+@end group
@end smallexample
can be used to load a pointer to the symbol @code{sym} into register
@code{ENTRY} and @code{L32R} instructions; instead, the assembler puts
the data in a literal pool.
-Literal pools for absolute mode @code{L32R} instructions
-(@pxref{Absolute Literals Directive}) are placed in a separate
-@code{.lit4} section. By default literal pools for PC-relative mode
-@code{L32R} instructions are placed in a separate @code{.literal}
-section; however, when using the @samp{--text-@-section-@-literals}
+Literal pools are placed by default in separate literal sections;
+however, when using the @samp{--text-@-section-@-literals}
option (@pxref{Xtensa Options, ,Command Line Options}), the literal
-pools are placed in the current section. These text section literal
+pools for PC-relative mode @code{L32R} instructions
+are placed in the current section.@footnote{Literals for the
+@code{.init} and @code{.fini} sections are always placed in separate
+sections, even when @samp{--text-@-section-@-literals} is enabled.}
+These text section literal
pools are created automatically before @code{ENTRY} instructions and
manually after @samp{.literal_position} directives (@pxref{Literal
Position Directive, ,literal_position}). If there are no preceding
must be used to place the text section literal pools; otherwise,
@command{@value{AS}} will report an error.
+When literals are placed in separate sections, the literal section names
+are derived from the names of the sections where the literals are
+defined. The base literal section names are @code{.literal} for
+PC-relative mode @code{L32R} instructions and @code{.lit4} for absolute
+mode @code{L32R} instructions (@pxref{Absolute Literals Directive,
+,absolute-literals}). These base names are used for literals defined in
+the default @code{.text} section. For literals defined in other
+sections or within the scope of a @code{literal_prefix} directive
+(@pxref{Literal Prefix Directive, ,literal_prefix}), the following rules
+determine the literal section name:
+
+@enumerate
+@item
+If the current section is a member of a section group, the literal
+section name includes the group name as a suffix to the base
+@code{.literal} or @code{.lit4} name, with a period to separate the base
+name and group name. The literal section is also made a member of the
+group.
+
+@item
+If the current section name (or @code{literal_prefix} value) begins with
+``@code{.gnu.linkonce.@var{kind}.}'', the literal section name is formed
+by replacing ``@code{.@var{kind}}'' with the base @code{.literal} or
+@code{.lit4} name. For example, for literals defined in a section named
+@code{.gnu.linkonce.t.func}, the literal section will be
+@code{.gnu.linkonce.literal.func} or @code{.gnu.linkonce.lit4.func}.
+
+@item
+If the current section name (or @code{literal_prefix} value) ends with
+@code{.text}, the literal section name is formed by replacing that
+suffix with the base @code{.literal} or @code{.lit4} name. For example,
+for literals defined in a section named @code{.iram0.text}, the literal
+section will be @code{.iram0.literal} or @code{.iram0.lit4}.
+
+@item
+If none of the preceding conditions apply, the literal section name is
+formed by adding the base @code{.literal} or @code{.lit4} name as a
+suffix to the current section name (or @code{literal_prefix} value).
+@end enumerate
+
@node Literal Position Directive
@subsection literal_position
@cindex @code{literal_position} directive
the unconditional jump.
@smallexample
+@group
.global M
code_start:
+@end group
j continue
.literal_position
.align 4
+@group
continue:
movi a4, M
+@end group
@end smallexample
@node Literal Prefix Directive
@subsection literal_prefix
@cindex @code{literal_prefix} directive
-The @code{literal_prefix} directive allows you to specify different
-sections to hold literals from different portions of an assembly file.
-With this directive, a single assembly file can be used to generate code
-into multiple sections, including literals generated by the assembler.
+The @code{literal_prefix} directive allows you to override the default
+literal section names, which are derived from the names of the sections
+where the literals are defined.
@smallexample
+@group
.begin literal_prefix [@var{name}]
.end literal_prefix
+@end group
@end smallexample
-By default the assembler places literal pools in sections separate from
-the instructions, using the default literal section names of
-@code{.literal} for PC-relative mode @code{L32R} instructions and
-@code{.lit4} for absolute mode @code{L32R} instructions (@pxref{Absolute
-Literals Directive}). The @code{literal_prefix} directive causes
-different literal sections to be used for the code inside the delimited
-region. The new literal sections are determined by including @var{name}
-as a prefix to the default literal section names. If the @var{name}
+For literals defined within the delimited region, the literal section
+names are derived from the @var{name} argument instead of the name of
+the current section. The rules used to derive the literal section names
+do not change. @xref{Literal Directive, ,literal}. If the @var{name}
argument is omitted, the literal sections revert to the defaults. This
directive has no effect when using the
@samp{--text-@-section-@-literals} option (@pxref{Xtensa Options,
,Command Line Options}).
-Except for two special cases, the assembler determines the new literal
-sections by simply prepending @var{name} to the default section names,
-resulting in @code{@var{name}.literal} and @code{@var{name}.lit4}
-sections. The @code{literal_prefix} directive is often used with the
-name of the current text section as the prefix argument. To facilitate
-this usage, the assembler uses special case rules when it recognizes
-@var{name} as a text section name. First, if @var{name} ends with
-@code{.text}, that suffix is not included in the literal section name.
-For example, if @var{name} is @code{.iram0.text}, then the literal
-sections will be @code{.iram0.literal} and @code{.iram0.lit4}. Second,
-if @var{name} begins with @code{.gnu.linkonce.t.}, then the literal
-section names are formed by replacing the @code{.t} substring with
-@code{.literal} and @code{.lit4}. For example, if @var{name} is
-@code{.gnu.linkonce.t.func}, the literal sections will be
-@code{.gnu.linkonce.literal.func} and @code{.gnu.linkonce.lit4.func}.
-
@node Absolute Literals Directive
@subsection absolute-literals
@cindex @code{absolute-literals} directive
include the absolute addressing option for @code{L32R} instructions.
@smallexample
+@group
.begin [no-]absolute-literals
.end [no-]absolute-literals
+@end group
@end smallexample
These directives do not change the @code{L32R} mode---they only cause