/* dwarf2dbg.c - DWARF2 debug support
- Copyright 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+ Copyright 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
/* Logical line numbers can be controlled by the compiler via the
- following two directives:
+ following directives:
.file FILENO "file.c"
- .loc FILENO LINENO [COLUMN]
+ .loc FILENO LINENO [COLUMN] [basic_block] [prologue_end] \
+ [epilogue_begin] [is_stmt VALUE] [isa VALUE]
+*/
- FILENO is the filenumber. */
-
-#include "ansidecl.h"
#include "as.h"
+#include "safe-ctype.h"
#ifdef HAVE_LIMITS_H
#include <limits.h>
#include "dwarf2dbg.h"
#include <filenames.h>
+#ifdef HAVE_DOS_BASED_FILE_SYSTEM
+/* We need to decide which character to use as a directory separator.
+ Just because HAVE_DOS_BASED_FILE_SYSTEM is defined, it does not
+ necessarily mean that the backslash character is the one to use.
+ Some environments, eg Cygwin, can support both naming conventions.
+ So we use the heuristic that we only need to use the backslash if
+ the path is an absolute path starting with a DOS style drive
+ selector. eg C: or D: */
+# define INSERT_DIR_SEPARATOR(string, offset) \
+ do \
+ { \
+ if (offset > 1 \
+ && string[0] != 0 \
+ && string[1] == ':') \
+ string [offset] = '\\'; \
+ else \
+ string [offset] = '/'; \
+ } \
+ while (0)
+#else
+# define INSERT_DIR_SEPARATOR(string, offset) string[offset] = '/'
+#endif
+
#ifndef DWARF2_FORMAT
# define DWARF2_FORMAT() dwarf2_format_32bit
#endif
#ifndef DWARF2_ADDR_SIZE
-# define DWARF2_ADDR_SIZE(bfd) (bfd_arch_bits_per_address (bfd) / 8);
-#endif
-
-#ifndef TC_DWARF2_EMIT_OFFSET
-# define TC_DWARF2_EMIT_OFFSET generic_dwarf2_emit_offset
+# define DWARF2_ADDR_SIZE(bfd) (bfd_arch_bits_per_address (bfd) / 8)
#endif
-#ifdef BFD_ASSEMBLER
-
#include "subsegs.h"
#include "elf/dwarf2.h"
#define DL_FILES 1
#define DL_BODY 2
+/* If linker relaxation might change offsets in the code, the DWARF special
+ opcodes and variable-length operands cannot be used. If this macro is
+ nonzero, use the DW_LNS_fixed_advance_pc opcode instead. */
+#ifndef DWARF2_USE_FIXED_ADVANCE_PC
+# define DWARF2_USE_FIXED_ADVANCE_PC 0
+#endif
+
/* First special line opcde - leave room for the standard opcodes.
Note: If you want to change this, you'll have to update the
"standard_opcode_lengths" table that is emitted below in
- dwarf2_finish(). */
-#define DWARF2_LINE_OPCODE_BASE 10
+ out_debug_line(). */
+#define DWARF2_LINE_OPCODE_BASE 13
#ifndef DWARF2_LINE_BASE
/* Minimum line offset in a special line info. opcode. This value
# define DWARF2_LINE_MIN_INSN_LENGTH 1
#endif
-/* Flag that indicates the initial value of the is_stmt_start flag.
- In the present implementation, we do not mark any lines as
- the beginning of a source statement, because that information
- is not made available by the GCC front-end. */
+/* Flag that indicates the initial value of the is_stmt_start flag. */
#define DWARF2_LINE_DEFAULT_IS_STMT 1
/* Given a special op, return the line skip amount. */
struct line_entry {
struct line_entry *next;
- fragS *frag;
- addressT frag_ofs;
+ symbolS *label;
struct dwarf2_line_info loc;
};
doing work when there's nothing to do. */
static bfd_boolean loc_directive_seen;
-/* Current location as indicated by the most recent .loc directive. */
-static struct dwarf2_line_info current;
+/* TRUE when we're supposed to set the basic block mark whenever a
+ label is seen. */
+bfd_boolean dwarf2_loc_mark_labels;
-/* Fake label name. */
-static char const fake_label_name[] = ".L0\001";
+/* Current location as indicated by the most recent .loc directive. */
+static struct dwarf2_line_info current = {
+ 1, 1, 0, 0,
+ DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0
+};
/* The size of an address on the target. */
static unsigned int sizeof_address;
\f
-static void generic_dwarf2_emit_offset PARAMS((symbolS *, unsigned int));
-static struct line_subseg *get_line_subseg PARAMS ((segT, subsegT));
-static unsigned int get_filenum PARAMS ((const char *, unsigned int));
-static struct frag *first_frag_for_seg PARAMS ((segT));
-static struct frag *last_frag_for_seg PARAMS ((segT));
-static void out_byte PARAMS ((int));
-static void out_opcode PARAMS ((int));
-static void out_two PARAMS ((int));
-static void out_four PARAMS ((int));
-static void out_abbrev PARAMS ((int, int));
-static void out_uleb128 PARAMS ((addressT));
-static symbolS *symbol_new_now PARAMS ((void));
-static void set_symbol_value_now PARAMS ((symbolS *));
-static offsetT get_frag_fix PARAMS ((fragS *));
-static void out_set_addr PARAMS ((segT, fragS *, addressT));
-static int size_inc_line_addr PARAMS ((int, addressT));
-static void emit_inc_line_addr PARAMS ((int, addressT, char *, int));
-static void out_inc_line_addr PARAMS ((int, addressT));
-static void relax_inc_line_addr PARAMS ((int, segT, fragS *, addressT,
- fragS *, addressT));
-static void process_entries PARAMS ((segT, struct line_entry *));
-static void out_file_list PARAMS ((void));
-static void out_debug_line PARAMS ((segT));
-static void out_debug_aranges PARAMS ((segT, segT));
-static void out_debug_abbrev PARAMS ((segT));
-static void out_debug_info PARAMS ((segT, segT, segT));
+static struct line_subseg *get_line_subseg (segT, subsegT);
+static unsigned int get_filenum (const char *, unsigned int);
+static struct frag *first_frag_for_seg (segT);
+static struct frag *last_frag_for_seg (segT);
+static void out_byte (int);
+static void out_opcode (int);
+static void out_two (int);
+static void out_four (int);
+static void out_abbrev (int, int);
+static void out_uleb128 (addressT);
+static void out_sleb128 (addressT);
+static offsetT get_frag_fix (fragS *, segT);
+static void out_set_addr (symbolS *);
+static int size_inc_line_addr (int, addressT);
+static void emit_inc_line_addr (int, addressT, char *, int);
+static void out_inc_line_addr (int, addressT);
+static void out_fixed_inc_line_addr (int, symbolS *, symbolS *);
+static void relax_inc_line_addr (int, symbolS *, symbolS *);
+static void process_entries (segT, struct line_entry *);
+static void out_file_list (void);
+static void out_debug_line (segT);
+static void out_debug_aranges (segT, segT);
+static void out_debug_abbrev (segT);
\f
+#ifndef TC_DWARF2_EMIT_OFFSET
+#define TC_DWARF2_EMIT_OFFSET generic_dwarf2_emit_offset
+
/* Create an offset to .dwarf2_*. */
static void
-generic_dwarf2_emit_offset (symbol, size)
- symbolS *symbol;
- unsigned int size;
+generic_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
{
expressionS expr;
expr.X_add_number = 0;
emit_expr (&expr, size);
}
+#endif
/* Find or create an entry for SEG+SUBSEG in ALL_SEGS. */
static struct line_subseg *
-get_line_subseg (seg, subseg)
- segT seg;
- subsegT subseg;
+get_line_subseg (segT seg, subsegT subseg)
{
static segT last_seg;
static subsegT last_subseg;
static struct line_subseg *last_line_subseg;
- struct line_seg *s;
+ struct line_seg **ps, *s;
struct line_subseg **pss, *ss;
if (seg == last_seg && subseg == last_subseg)
return last_line_subseg;
- for (s = all_segs; s; s = s->next)
+ for (ps = &all_segs; (s = *ps) != NULL; ps = &s->next)
if (s->seg == seg)
goto found_seg;
s = (struct line_seg *) xmalloc (sizeof (*s));
- s->next = all_segs;
+ s->next = NULL;
s->seg = seg;
s->head = NULL;
- all_segs = s;
+ *ps = s;
found_seg:
for (pss = &s->head; (ss = *pss) != NULL ; pss = &ss->next)
return ss;
}
-/* Record an entry for LOC ocurring at OFS within the current fragment. */
+/* Record an entry for LOC occurring at LABEL. */
-void
-dwarf2_gen_line_info (ofs, loc)
- addressT ofs;
- struct dwarf2_line_info *loc;
+static void
+dwarf2_gen_line_info_1 (symbolS *label, struct dwarf2_line_info *loc)
{
struct line_subseg *ss;
struct line_entry *e;
+
+ e = (struct line_entry *) xmalloc (sizeof (*e));
+ e->next = NULL;
+ e->label = label;
+ e->loc = *loc;
+
+ ss = get_line_subseg (now_seg, now_subseg);
+ *ss->ptail = e;
+ ss->ptail = &e->next;
+}
+
+/* Record an entry for LOC occurring at OFS within the current fragment. */
+
+void
+dwarf2_gen_line_info (addressT ofs, struct dwarf2_line_info *loc)
+{
static unsigned int line = -1;
static unsigned int filenum = -1;
+ symbolS *sym;
+
/* Early out for as-yet incomplete location information. */
if (loc->filenum == 0 || loc->line == 0)
return;
line = loc->line;
filenum = loc->filenum;
- e = (struct line_entry *) xmalloc (sizeof (*e));
- e->next = NULL;
- e->frag = frag_now;
- e->frag_ofs = ofs;
- e->loc = *loc;
-
- ss = get_line_subseg (now_seg, now_subseg);
- *ss->ptail = e;
- ss->ptail = &e->next;
+ sym = symbol_temp_new (now_seg, ofs, frag_now);
+ dwarf2_gen_line_info_1 (sym, loc);
}
+/* Returns the current source information. If .file directives have
+ been encountered, the info for the corresponding source file is
+ returned. Otherwise, the info for the assembly source file is
+ returned. */
+
void
-dwarf2_where (line)
- struct dwarf2_line_info *line;
+dwarf2_where (struct dwarf2_line_info *line)
{
if (debug_type == DEBUG_DWARF2)
{
as_where (&filename, &line->line);
line->filenum = get_filenum (filename, 0);
line->column = 0;
- line->flags = DWARF2_FLAG_BEGIN_STMT;
+ line->flags = DWARF2_FLAG_IS_STMT;
+ line->isa = current.isa;
}
else
*line = current;
}
+/* A hook to allow the target backend to inform the line number state
+ machine of isa changes when assembler debug info is enabled. */
+
+void
+dwarf2_set_isa (unsigned int isa)
+{
+ current.isa = isa;
+}
+
/* Called for each machine instruction, or relatively atomic group of
machine instructions (ie built-in macro). The instruction or group
is SIZE bytes in length. If dwarf2 line number generation is called
for, emit a line statement appropriately. */
void
-dwarf2_emit_insn (size)
- int size;
+dwarf2_emit_insn (int size)
{
struct dwarf2_line_info loc;
else if (debug_type != DEBUG_DWARF2)
return;
else
- dwarf2_where (& loc);
+ dwarf2_where (&loc);
dwarf2_gen_line_info (frag_now_fix () - size, &loc);
+
+ current.flags &= ~(DWARF2_FLAG_BASIC_BLOCK
+ | DWARF2_FLAG_PROLOGUE_END
+ | DWARF2_FLAG_EPILOGUE_BEGIN);
+}
+
+/* Called for each (preferably code) label. If dwarf2_loc_mark_labels
+ is enabled, emit a basic block marker. */
+
+void
+dwarf2_emit_label (symbolS *label)
+{
+ struct dwarf2_line_info loc;
+
+ if (!dwarf2_loc_mark_labels)
+ return;
+ if (S_GET_SEGMENT (label) != now_seg)
+ return;
+ if (!(bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE))
+ return;
+
+ if (debug_type == DEBUG_DWARF2)
+ dwarf2_where (&loc);
+ else
+ {
+ loc = current;
+ loc_directive_seen = FALSE;
+ }
+
+ loc.flags |= DWARF2_FLAG_BASIC_BLOCK;
+
+ current.flags &= ~(DWARF2_FLAG_BASIC_BLOCK
+ | DWARF2_FLAG_PROLOGUE_END
+ | DWARF2_FLAG_EPILOGUE_BEGIN);
+
+ dwarf2_gen_line_info_1 (label, &loc);
}
/* Get a .debug_line file number for FILENAME. If NUM is nonzero,
empty one. */
static unsigned int
-get_filenum (filename, num)
- const char *filename;
- unsigned int num;
+get_filenum (const char *filename, unsigned int num)
{
static unsigned int last_used, last_used_dir_len;
const char *file;
{
--dir_len;
for (dir = 1; dir < dirs_in_use; ++dir)
- if (memcmp (filename, dirs[dir], dir_len) == 0
+ if (strncmp (filename, dirs[dir], dir_len) == 0
&& dirs[dir][dir_len] == '\0')
break;
files[i].filename = num ? file : xstrdup (file);
files[i].dir = dir;
- files_in_use = i + 1;
+ if (files_in_use < i + 1)
+ files_in_use = i + 1;
last_used = i;
last_used_dir_len = dir_len;
If an entry is added to the file table, return a pointer to the filename. */
char *
-dwarf2_directive_file (dummy)
- int dummy ATTRIBUTE_UNUSED;
+dwarf2_directive_file (int dummy ATTRIBUTE_UNUSED)
{
offsetT num;
char *filename;
num = get_absolute_expression ();
filename = demand_copy_C_string (&filename_len);
+ if (filename == NULL)
+ return NULL;
demand_empty_rest_of_line ();
if (num < 1)
}
void
-dwarf2_directive_loc (dummy)
- int dummy ATTRIBUTE_UNUSED;
+dwarf2_directive_loc (int dummy ATTRIBUTE_UNUSED)
{
- offsetT filenum, line, column;
+ offsetT filenum, line;
filenum = get_absolute_expression ();
SKIP_WHITESPACE ();
line = get_absolute_expression ();
- SKIP_WHITESPACE ();
- column = get_absolute_expression ();
- demand_empty_rest_of_line ();
if (filenum < 1)
{
current.filenum = filenum;
current.line = line;
- current.column = column;
- current.flags = DWARF2_FLAG_BEGIN_STMT;
-
- loc_directive_seen = TRUE;
#ifndef NO_LISTING
if (listing)
char *cp = (char *) alloca (dir_len + 1 + file_len + 1);
memcpy (cp, dirs[files[filenum].dir], dir_len);
- cp[dir_len] = '/';
+ INSERT_DIR_SEPARATOR (cp, dir_len);
memcpy (cp + dir_len + 1, files[filenum].filename, file_len);
cp[dir_len + file_len + 1] = '\0';
listing_source_file (cp);
listing_source_line (line);
}
#endif
+
+ SKIP_WHITESPACE ();
+ if (ISDIGIT (*input_line_pointer))
+ {
+ current.column = get_absolute_expression ();
+ SKIP_WHITESPACE ();
+ }
+
+ while (ISALPHA (*input_line_pointer))
+ {
+ char *p, c;
+ offsetT value;
+
+ p = input_line_pointer;
+ c = get_symbol_end ();
+
+ if (strcmp (p, "basic_block") == 0)
+ {
+ current.flags |= DWARF2_FLAG_BASIC_BLOCK;
+ *input_line_pointer = c;
+ }
+ else if (strcmp (p, "prologue_end") == 0)
+ {
+ current.flags |= DWARF2_FLAG_PROLOGUE_END;
+ *input_line_pointer = c;
+ }
+ else if (strcmp (p, "epilogue_begin") == 0)
+ {
+ current.flags |= DWARF2_FLAG_EPILOGUE_BEGIN;
+ *input_line_pointer = c;
+ }
+ else if (strcmp (p, "is_stmt") == 0)
+ {
+ *input_line_pointer = c;
+ value = get_absolute_expression ();
+ if (value == 0)
+ current.flags &= ~DWARF2_FLAG_IS_STMT;
+ else if (value == 1)
+ current.flags |= DWARF2_FLAG_IS_STMT;
+ else
+ {
+ as_bad (_("is_stmt value not 0 or 1"));
+ return;
+ }
+ }
+ else if (strcmp (p, "isa") == 0)
+ {
+ *input_line_pointer = c;
+ value = get_absolute_expression ();
+ if (value >= 0)
+ current.isa = value;
+ else
+ {
+ as_bad (_("isa number less than zero"));
+ return;
+ }
+ }
+ else
+ {
+ as_bad (_("unknown .loc sub-directive `%s'"), p);
+ *input_line_pointer = c;
+ return;
+ }
+
+ SKIP_WHITESPACE ();
+ }
+
+ demand_empty_rest_of_line ();
+ loc_directive_seen = TRUE;
+}
+
+void
+dwarf2_directive_loc_mark_labels (int dummy ATTRIBUTE_UNUSED)
+{
+ offsetT value = get_absolute_expression ();
+
+ if (value != 0 && value != 1)
+ {
+ as_bad (_("expected 0 or 1"));
+ ignore_rest_of_line ();
+ }
+ else
+ {
+ dwarf2_loc_mark_labels = value != 0;
+ demand_empty_rest_of_line ();
+ }
}
\f
static struct frag *
-first_frag_for_seg (seg)
- segT seg;
+first_frag_for_seg (segT seg)
{
- frchainS *f, *first = NULL;
-
- for (f = frchain_root; f; f = f->frch_next)
- if (f->frch_seg == seg
- && (! first || first->frch_subseg > f->frch_subseg))
- first = f;
-
- return first ? first->frch_root : NULL;
+ return seg_info (seg)->frchainP->frch_root;
}
static struct frag *
-last_frag_for_seg (seg)
- segT seg;
+last_frag_for_seg (segT seg)
{
- frchainS *f, *last = NULL;
+ frchainS *f = seg_info (seg)->frchainP;
- for (f = frchain_root; f; f = f->frch_next)
- if (f->frch_seg == seg
- && (! last || last->frch_subseg < f->frch_subseg))
- last= f;
+ while (f->frch_next != NULL)
+ f = f->frch_next;
- return last ? last->frch_last : NULL;
+ return f->frch_last;
}
\f
/* Emit a single byte into the current segment. */
static inline void
-out_byte (byte)
- int byte;
+out_byte (int byte)
{
FRAG_APPEND_1_CHAR (byte);
}
/* Emit a statement program opcode into the current segment. */
static inline void
-out_opcode (opc)
- int opc;
+out_opcode (int opc)
{
out_byte (opc);
}
/* Emit a two-byte word into the current segment. */
static inline void
-out_two (data)
- int data;
+out_two (int data)
{
md_number_to_chars (frag_more (2), data, 2);
}
/* Emit a four byte word into the current segment. */
static inline void
-out_four (data)
- int data;
+out_four (int data)
{
md_number_to_chars (frag_more (4), data, 4);
}
/* Emit an unsigned "little-endian base 128" number. */
static void
-out_uleb128 (value)
- addressT value;
+out_uleb128 (addressT value)
{
output_leb128 (frag_more (sizeof_leb128 (value, 0)), value, 0);
}
-/* Emit a tuple for .debug_abbrev. */
-
-static inline void
-out_abbrev (name, form)
- int name, form;
-{
- out_uleb128 (name);
- out_uleb128 (form);
-}
-
-/* Create a new fake symbol whose value is the current position. */
+/* Emit a signed "little-endian base 128" number. */
-static symbolS *
-symbol_new_now ()
+static void
+out_sleb128 (addressT value)
{
- return symbol_new (fake_label_name, now_seg, frag_now_fix (), frag_now);
+ output_leb128 (frag_more (sizeof_leb128 (value, 1)), value, 1);
}
-/* Set the value of SYM to the current position in the current segment. */
+/* Emit a tuple for .debug_abbrev. */
-static void
-set_symbol_value_now (sym)
- symbolS *sym;
+static inline void
+out_abbrev (int name, int form)
{
- S_SET_SEGMENT (sym, now_seg);
- S_SET_VALUE (sym, frag_now_fix ());
- symbol_set_frag (sym, frag_now);
+ out_uleb128 (name);
+ out_uleb128 (form);
}
/* Get the size of a fragment. */
static offsetT
-get_frag_fix (frag)
- fragS *frag;
+get_frag_fix (fragS *frag, segT seg)
{
frchainS *fr;
/* If a fragment is the last in the chain, special measures must be
taken to find its size before relaxation, since it may be pending
on some subsegment chain. */
- for (fr = frchain_root; fr; fr = fr->frch_next)
+ for (fr = seg_info (seg)->frchainP; fr; fr = fr->frch_next)
if (fr->frch_last == frag)
- {
- long align_mask = -1 << get_recorded_alignment (fr->frch_seg);
- return (((char *) obstack_next_free (&fr->frch_obstack)
- - frag->fr_literal) + ~align_mask) & align_mask;
- }
+ return (char *) obstack_next_free (&fr->frch_obstack) - frag->fr_literal;
abort ();
}
/* Set an absolute address (may result in a relocation entry). */
static void
-out_set_addr (seg, frag, ofs)
- segT seg;
- fragS *frag;
- addressT ofs;
+out_set_addr (symbolS *sym)
{
expressionS expr;
- symbolS *sym;
-
- sym = symbol_new (fake_label_name, seg, ofs, frag);
out_opcode (DW_LNS_extended_op);
out_uleb128 (sizeof_address + 1);
}
#if DWARF2_LINE_MIN_INSN_LENGTH > 1
-static void scale_addr_delta PARAMS ((addressT *));
+static void scale_addr_delta (addressT *);
static void
-scale_addr_delta (addr_delta)
- addressT *addr_delta;
+scale_addr_delta (addressT *addr_delta)
{
static int printed_this = 0;
if (*addr_delta % DWARF2_LINE_MIN_INSN_LENGTH != 0)
exactly the expected number of bytes. */
static int
-size_inc_line_addr (line_delta, addr_delta)
- int line_delta;
- addressT addr_delta;
+size_inc_line_addr (int line_delta, addressT addr_delta)
{
unsigned int tmp, opcode;
int len = 0;
}
static void
-emit_inc_line_addr (line_delta, addr_delta, p, len)
- int line_delta;
- addressT addr_delta;
- char *p;
- int len;
+emit_inc_line_addr (int line_delta, addressT addr_delta, char *p, int len)
{
unsigned int tmp, opcode;
int need_copy = 0;
char *end = p + len;
+ /* Line number sequences cannot go backward in addresses. This means
+ we've incorrectly ordered the statements in the sequence. */
+ assert ((offsetT) addr_delta >= 0);
+
/* Scale the address delta by the minimum instruction length. */
scale_addr_delta (&addr_delta);
*p++ = DW_LNS_advance_line;
p += output_leb128 (p, line_delta, 1);
- /* Prettier, I think, to use DW_LNS_copy instead of a
- "line +0, addr +0" special opcode. */
- if (addr_delta == 0)
- {
- *p++ = DW_LNS_copy;
- goto done;
- }
-
line_delta = 0;
tmp = 0 - DWARF2_LINE_BASE;
need_copy = 1;
}
+ /* Prettier, I think, to use DW_LNS_copy instead of a "line +0, addr +0"
+ special opcode. */
+ if (line_delta == 0 && addr_delta == 0)
+ {
+ *p++ = DW_LNS_copy;
+ goto done;
+ }
+
/* Bias the opcode by the special opcode base. */
tmp += DWARF2_LINE_OPCODE_BASE;
/* Handy routine to combine calls to the above two routines. */
static void
-out_inc_line_addr (line_delta, addr_delta)
- int line_delta;
- addressT addr_delta;
+out_inc_line_addr (int line_delta, addressT addr_delta)
{
int len = size_inc_line_addr (line_delta, addr_delta);
emit_inc_line_addr (line_delta, addr_delta, frag_more (len), len);
}
+/* Write out an alternative form of line and address skips using
+ DW_LNS_fixed_advance_pc opcodes. This uses more space than the default
+ line and address information, but it helps support linker relaxation that
+ changes the code offsets. */
+
+static void
+out_fixed_inc_line_addr (int line_delta, symbolS *to_sym, symbolS *from_sym)
+{
+ expressionS expr;
+
+ /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence. */
+ if (line_delta == INT_MAX)
+ {
+ out_opcode (DW_LNS_fixed_advance_pc);
+ expr.X_op = O_subtract;
+ expr.X_add_symbol = to_sym;
+ expr.X_op_symbol = from_sym;
+ expr.X_add_number = 0;
+ emit_expr (&expr, 2);
+
+ out_opcode (DW_LNS_extended_op);
+ out_byte (1);
+ out_opcode (DW_LNE_end_sequence);
+ return;
+ }
+
+ out_opcode (DW_LNS_advance_line);
+ out_sleb128 (line_delta);
+
+ out_opcode (DW_LNS_fixed_advance_pc);
+ expr.X_op = O_subtract;
+ expr.X_add_symbol = to_sym;
+ expr.X_op_symbol = from_sym;
+ expr.X_add_number = 0;
+ emit_expr (&expr, 2);
+
+ out_opcode (DW_LNS_copy);
+}
+
/* Generate a variant frag that we can use to relax address/line
increments between fragments of the target segment. */
static void
-relax_inc_line_addr (line_delta, seg, to_frag, to_ofs, from_frag, from_ofs)
- int line_delta;
- segT seg;
- fragS *to_frag, *from_frag;
- addressT to_ofs, from_ofs;
+relax_inc_line_addr (int line_delta, symbolS *to_sym, symbolS *from_sym)
{
- symbolS *to_sym, *from_sym;
expressionS expr;
int max_chars;
- to_sym = symbol_new (fake_label_name, seg, to_ofs, to_frag);
- from_sym = symbol_new (fake_label_name, seg, from_ofs, from_frag);
-
expr.X_op = O_subtract;
expr.X_add_symbol = to_sym;
expr.X_op_symbol = from_sym;
the relaxation loop. We set fr_subtype to the expected length. */
int
-dwarf2dbg_estimate_size_before_relax (frag)
- fragS *frag;
+dwarf2dbg_estimate_size_before_relax (fragS *frag)
{
offsetT addr_delta;
int size;
of the frag. This returns the change in frag length. */
int
-dwarf2dbg_relax_frag (frag)
- fragS *frag;
+dwarf2dbg_relax_frag (fragS *frag)
{
int old_size, new_size;
fr_subtype will be the desired length of the frag. */
void
-dwarf2dbg_convert_frag (frag)
- fragS *frag;
+dwarf2dbg_convert_frag (fragS *frag)
{
offsetT addr_diff;
beginning at E, for segment SEG. */
static void
-process_entries (seg, e)
- segT seg;
- struct line_entry *e;
+process_entries (segT seg, struct line_entry *e)
{
unsigned filenum = 1;
unsigned line = 1;
unsigned column = 0;
- unsigned flags = DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_BEGIN_STMT : 0;
- fragS *frag = NULL;
- fragS *last_frag;
- addressT frag_ofs = 0;
- addressT last_frag_ofs;
+ unsigned isa = 0;
+ unsigned flags = DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0;
+ fragS *last_frag = NULL, *frag;
+ addressT last_frag_ofs = 0, frag_ofs;
+ symbolS *last_lab = NULL, *lab;
struct line_entry *next;
- while (e)
+ do
{
- int changed = 0;
+ int line_delta;
if (filenum != e->loc.filenum)
{
filenum = e->loc.filenum;
out_opcode (DW_LNS_set_file);
out_uleb128 (filenum);
- changed = 1;
}
if (column != e->loc.column)
column = e->loc.column;
out_opcode (DW_LNS_set_column);
out_uleb128 (column);
- changed = 1;
}
- if ((e->loc.flags ^ flags) & DWARF2_FLAG_BEGIN_STMT)
+ if (isa != e->loc.isa)
{
- flags = e->loc.flags;
- out_opcode (DW_LNS_negate_stmt);
- changed = 1;
+ isa = e->loc.isa;
+ out_opcode (DW_LNS_set_isa);
+ out_uleb128 (isa);
}
- if (e->loc.flags & DWARF2_FLAG_BEGIN_BLOCK)
+ if ((e->loc.flags ^ flags) & DWARF2_FLAG_IS_STMT)
{
- out_opcode (DW_LNS_set_basic_block);
- changed = 1;
+ flags = e->loc.flags;
+ out_opcode (DW_LNS_negate_stmt);
}
+ if (e->loc.flags & DWARF2_FLAG_BASIC_BLOCK)
+ out_opcode (DW_LNS_set_basic_block);
+
+ if (e->loc.flags & DWARF2_FLAG_PROLOGUE_END)
+ out_opcode (DW_LNS_set_prologue_end);
+
+ if (e->loc.flags & DWARF2_FLAG_EPILOGUE_BEGIN)
+ out_opcode (DW_LNS_set_epilogue_begin);
+
/* Don't try to optimize away redundant entries; gdb wants two
entries for a function where the code starts on the same line as
the {, and there's no way to identify that case here. Trust gcc
to optimize appropriately. */
- if (1 /* line != e->loc.line || changed */)
- {
- int line_delta = e->loc.line - line;
- if (frag == NULL)
- {
- out_set_addr (seg, e->frag, e->frag_ofs);
- out_inc_line_addr (line_delta, 0);
- }
- else if (frag == e->frag)
- out_inc_line_addr (line_delta, e->frag_ofs - frag_ofs);
- else
- relax_inc_line_addr (line_delta, seg, e->frag, e->frag_ofs,
- frag, frag_ofs);
+ line_delta = e->loc.line - line;
+ lab = e->label;
+ frag = symbol_get_frag (lab);
+ frag_ofs = S_GET_VALUE (lab);
- frag = e->frag;
- frag_ofs = e->frag_ofs;
- line = e->loc.line;
- }
- else if (frag == NULL)
+ if (last_frag == NULL)
{
- out_set_addr (seg, e->frag, e->frag_ofs);
- frag = e->frag;
- frag_ofs = e->frag_ofs;
+ out_set_addr (lab);
+ out_inc_line_addr (line_delta, 0);
}
+ else if (DWARF2_USE_FIXED_ADVANCE_PC)
+ out_fixed_inc_line_addr (line_delta, lab, last_lab);
+ else if (frag == last_frag)
+ out_inc_line_addr (line_delta, frag_ofs - last_frag_ofs);
+ else
+ relax_inc_line_addr (line_delta, lab, last_lab);
+
+ line = e->loc.line;
+ last_lab = lab;
+ last_frag = frag;
+ last_frag_ofs = frag_ofs;
next = e->next;
free (e);
e = next;
}
+ while (e);
/* Emit a DW_LNE_end_sequence for the end of the section. */
- last_frag = last_frag_for_seg (seg);
- last_frag_ofs = get_frag_fix (last_frag);
- if (frag == last_frag)
- out_inc_line_addr (INT_MAX, last_frag_ofs - frag_ofs);
+ frag = last_frag_for_seg (seg);
+ frag_ofs = get_frag_fix (frag, seg);
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ {
+ lab = symbol_temp_new (seg, frag_ofs, frag);
+ out_fixed_inc_line_addr (INT_MAX, lab, last_lab);
+ }
+ else if (frag == last_frag)
+ out_inc_line_addr (INT_MAX, frag_ofs - last_frag_ofs);
else
- relax_inc_line_addr (INT_MAX, seg, last_frag, last_frag_ofs,
- frag, frag_ofs);
+ {
+ lab = symbol_temp_new (seg, frag_ofs, frag);
+ relax_inc_line_addr (INT_MAX, lab, last_lab);
+ }
}
/* Emit the directory and file tables for .debug_line. */
static void
-out_file_list ()
+out_file_list (void)
{
size_t size;
char *cp;
/* Emit the collected .debug_line data. */
static void
-out_debug_line (line_seg)
- segT line_seg;
+out_debug_line (segT line_seg)
{
expressionS expr;
symbolS *line_start;
subseg_set (line_seg, 0);
- line_start = symbol_new_now ();
- prologue_end = symbol_make (fake_label_name);
- line_end = symbol_make (fake_label_name);
+ line_start = symbol_temp_new_now ();
+ prologue_end = symbol_temp_make ();
+ line_end = symbol_temp_make ();
/* Total length of the information for this compilation unit. */
expr.X_op = O_subtract;
out_byte (0); /* DW_LNS_set_basic_block */
out_byte (0); /* DW_LNS_const_add_pc */
out_byte (1); /* DW_LNS_fixed_advance_pc */
+ out_byte (0); /* DW_LNS_set_prologue_end */
+ out_byte (0); /* DW_LNS_set_epilogue_begin */
+ out_byte (1); /* DW_LNS_set_isa */
out_file_list ();
- set_symbol_value_now (prologue_end);
+ symbol_set_value_now (prologue_end);
/* For each section, emit a statement program. */
for (s = all_segs; s; s = s->next)
process_entries (s->seg, s->head->head);
- set_symbol_value_now (line_end);
+ symbol_set_value_now (line_end);
+}
+
+static void
+out_debug_ranges (segT ranges_seg)
+{
+ unsigned int addr_size = sizeof_address;
+ struct line_seg *s;
+ expressionS expr;
+ unsigned int i;
+
+ subseg_set (ranges_seg, 0);
+
+ /* Base Address Entry. */
+ for (i = 0; i < addr_size; i++)
+ out_byte (0xff);
+ for (i = 0; i < addr_size; i++)
+ out_byte (0);
+
+ /* Range List Entry. */
+ for (s = all_segs; s; s = s->next)
+ {
+ fragS *frag;
+ symbolS *beg, *end;
+
+ frag = first_frag_for_seg (s->seg);
+ beg = symbol_temp_new (s->seg, 0, frag);
+ s->text_start = beg;
+
+ frag = last_frag_for_seg (s->seg);
+ end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
+ s->text_end = end;
+
+ expr.X_op = O_symbol;
+ expr.X_add_symbol = beg;
+ expr.X_add_number = 0;
+ emit_expr (&expr, addr_size);
+
+ expr.X_op = O_symbol;
+ expr.X_add_symbol = end;
+ expr.X_add_number = 0;
+ emit_expr (&expr, addr_size);
+ }
+
+ /* End of Range Entry. */
+ for (i = 0; i < addr_size; i++)
+ out_byte (0);
+ for (i = 0; i < addr_size; i++)
+ out_byte (0);
}
/* Emit data for .debug_aranges. */
static void
-out_debug_aranges (aranges_seg, info_seg)
- segT aranges_seg;
- segT info_seg;
+out_debug_aranges (segT aranges_seg, segT info_seg)
{
unsigned int addr_size = sizeof_address;
addressT size, skip;
symbolS *beg, *end;
frag = first_frag_for_seg (s->seg);
- beg = symbol_new (fake_label_name, s->seg, 0, frag);
+ beg = symbol_temp_new (s->seg, 0, frag);
s->text_start = beg;
frag = last_frag_for_seg (s->seg);
- end = symbol_new (fake_label_name, s->seg, get_frag_fix (frag), frag);
+ end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
s->text_end = end;
expr.X_op = O_symbol;
sync with out_debug_info below. */
static void
-out_debug_abbrev (abbrev_seg)
- segT abbrev_seg;
+out_debug_abbrev (segT abbrev_seg)
{
subseg_set (abbrev_seg, 0);
out_abbrev (DW_AT_low_pc, DW_FORM_addr);
out_abbrev (DW_AT_high_pc, DW_FORM_addr);
}
+ else
+ {
+ if (DWARF2_FORMAT () == dwarf2_format_32bit)
+ out_abbrev (DW_AT_ranges, DW_FORM_data4);
+ else
+ out_abbrev (DW_AT_ranges, DW_FORM_data8);
+ }
out_abbrev (DW_AT_name, DW_FORM_string);
out_abbrev (DW_AT_comp_dir, DW_FORM_string);
out_abbrev (DW_AT_producer, DW_FORM_string);
/* Emit a description of this compilation unit for .debug_info. */
static void
-out_debug_info (info_seg, abbrev_seg, line_seg)
- segT info_seg;
- segT abbrev_seg;
- segT line_seg;
+out_debug_info (segT info_seg, segT abbrev_seg, segT line_seg, segT ranges_seg)
{
char producer[128];
char *comp_dir;
subseg_set (info_seg, 0);
- info_start = symbol_new_now ();
- info_end = symbol_make (fake_label_name);
+ info_start = symbol_temp_new_now ();
+ info_end = symbol_temp_make ();
/* Compilation Unit length. */
expr.X_op = O_subtract;
/* ??? sizeof_offset */
TC_DWARF2_EMIT_OFFSET (section_symbol (line_seg), 4);
- /* These two attributes may only be emitted if all of the code is
- contiguous. Multiple sections are not that. */
+ /* These two attributes are emitted if all of the code is contiguous. */
if (all_segs->next == NULL)
{
/* DW_AT_low_pc */
expr.X_add_number = 0;
emit_expr (&expr, sizeof_address);
}
+ else
+ {
+ /* This attribute is emitted if the code is disjoint. */
+ /* DW_AT_ranges. */
+ TC_DWARF2_EMIT_OFFSET (section_symbol (ranges_seg), sizeof_offset);
+ }
/* DW_AT_name. We don't have the actual file name that was present
on the command line, so assume files[1] is the main input file.
len = strlen (dirs[files[1].dir]);
p = frag_more (len + 1);
memcpy (p, dirs[files[1].dir], len);
- p[len] = '/';
+ INSERT_DIR_SEPARATOR (p, len);
}
len = strlen (files[1].filename) + 1;
p = frag_more (len);
dwarf2 draft has no standard code for assembler. */
out_two (DW_LANG_Mips_Assembler);
- set_symbol_value_now (info_end);
+ symbol_set_value_now (info_end);
}
+/* Finish the dwarf2 debug sections. We emit .debug.line if there
+ were any .file/.loc directives, or --gdwarf2 was given, or if the
+ file has a non-empty .debug_info section. If we emit .debug_line,
+ and the .debug_info section is empty, we also emit .debug_info,
+ .debug_aranges and .debug_abbrev. ALL_SEGS will be non-null if
+ there were any .file/.loc directives, or --gdwarf2 was given and
+ there were any located instructions emitted. */
+
void
-dwarf2_finish ()
+dwarf2_finish (void)
{
segT line_seg;
struct line_seg *s;
+ segT info_seg;
+ int emit_other_sections = 0;
- /* We don't need to do anything unless:
- - Some debug information was recorded via .file/.loc
- - or, we are generating DWARF2 information ourself (--gdwarf2)
- - or, there is a user-provided .debug_info section which could
- reference the file table in the .debug_line section we generate
- below. */
- if (all_segs == NULL
- && debug_type != DEBUG_DWARF2
- && bfd_get_section_by_name (stdoutput, ".debug_info") == NULL)
+ info_seg = bfd_get_section_by_name (stdoutput, ".debug_info");
+ emit_other_sections = info_seg == NULL || !seg_not_empty_p (info_seg);
+
+ if (!all_segs && emit_other_sections)
+ /* There is no line information and no non-empty .debug_info
+ section. */
return;
/* Calculate the size of an address for the target machine. */
/* Create and switch to the line number section. */
line_seg = subseg_new (".debug_line", 0);
- bfd_set_section_flags (stdoutput, line_seg, SEC_READONLY);
+ bfd_set_section_flags (stdoutput, line_seg, SEC_READONLY | SEC_DEBUGGING);
/* For each subsection, chain the debug entries together. */
for (s = all_segs; s; s = s->next)
out_debug_line (line_seg);
- /* If this is assembler generated line info, we need .debug_info
- and .debug_abbrev sections as well. */
- if (all_segs != NULL && debug_type == DEBUG_DWARF2)
+ /* If this is assembler generated line info, and there is no
+ debug_info already, we need .debug_info and .debug_abbrev
+ sections as well. */
+ if (emit_other_sections)
{
segT abbrev_seg;
- segT info_seg;
segT aranges_seg;
+ segT ranges_seg;
+ assert (all_segs);
+
info_seg = subseg_new (".debug_info", 0);
abbrev_seg = subseg_new (".debug_abbrev", 0);
aranges_seg = subseg_new (".debug_aranges", 0);
- bfd_set_section_flags (stdoutput, info_seg, SEC_READONLY);
- bfd_set_section_flags (stdoutput, abbrev_seg, SEC_READONLY);
- bfd_set_section_flags (stdoutput, aranges_seg, SEC_READONLY);
+ bfd_set_section_flags (stdoutput, info_seg,
+ SEC_READONLY | SEC_DEBUGGING);
+ bfd_set_section_flags (stdoutput, abbrev_seg,
+ SEC_READONLY | SEC_DEBUGGING);
+ bfd_set_section_flags (stdoutput, aranges_seg,
+ SEC_READONLY | SEC_DEBUGGING);
record_alignment (aranges_seg, ffs (2 * sizeof_address) - 1);
+ if (all_segs->next == NULL)
+ ranges_seg = NULL;
+ else
+ {
+ ranges_seg = subseg_new (".debug_ranges", 0);
+ bfd_set_section_flags (stdoutput, ranges_seg,
+ SEC_READONLY | SEC_DEBUGGING);
+ record_alignment (ranges_seg, ffs (2 * sizeof_address) - 1);
+ out_debug_ranges (ranges_seg);
+ }
+
out_debug_aranges (aranges_seg, info_seg);
out_debug_abbrev (abbrev_seg);
- out_debug_info (info_seg, abbrev_seg, line_seg);
+ out_debug_info (info_seg, abbrev_seg, line_seg, ranges_seg);
}
}
-
-#else
-void
-dwarf2_finish ()
-{
-}
-
-int
-dwarf2dbg_estimate_size_before_relax (frag)
- fragS *frag ATTRIBUTE_UNUSED;
-{
- as_fatal (_("dwarf2 is not supported for this object file format"));
- return 0;
-}
-
-int
-dwarf2dbg_relax_frag (frag)
- fragS *frag ATTRIBUTE_UNUSED;
-{
- as_fatal (_("dwarf2 is not supported for this object file format"));
- return 0;
-}
-
-void
-dwarf2dbg_convert_frag (frag)
- fragS *frag ATTRIBUTE_UNUSED;
-{
- as_fatal (_("dwarf2 is not supported for this object file format"));
-}
-
-void
-dwarf2_emit_insn (size)
- int size ATTRIBUTE_UNUSED;
-{
-}
-
-char *
-dwarf2_directive_file (dummy)
- int dummy ATTRIBUTE_UNUSED;
-{
- s_app_file (0);
- return NULL;
-}
-
-void
-dwarf2_directive_loc (dummy)
- int dummy ATTRIBUTE_UNUSED;
-{
- as_fatal (_("dwarf2 is not supported for this object file format"));
-}
-#endif /* BFD_ASSEMBLER */
projects / deliverable / binutils-gdb.git / blobdiff