/* dwarf2dbg.c - DWARF2 debug support
- Copyright 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
- Free Software Foundation, Inc.
+ Copyright (C) 1999-2019 Free Software Foundation, Inc.
Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
This file is part of GAS, the GNU Assembler.
.file FILENO "file.c"
.loc FILENO LINENO [COLUMN] [basic_block] [prologue_end] \
- [epilogue_begin] [is_stmt VALUE] [isa VALUE]
+ [epilogue_begin] [is_stmt VALUE] [isa VALUE] \
+ [discriminator VALUE]
*/
#include "as.h"
do \
{ \
if (offset > 1 \
- && string[0] != 0 \
- && string[1] == ':') \
+ && string[0] != 0 \
+ && string[1] == ':') \
string [offset] = '\\'; \
else \
string [offset] = '/'; \
#endif
#ifndef DWARF2_FORMAT
-# define DWARF2_FORMAT() dwarf2_format_32bit
+# define DWARF2_FORMAT(SEC) dwarf2_format_32bit
#endif
#ifndef DWARF2_ADDR_SIZE
# define DWARF2_ADDR_SIZE(bfd) (bfd_arch_bits_per_address (bfd) / 8)
#endif
+#ifndef DWARF2_FILE_NAME
+#define DWARF2_FILE_NAME(FILENAME, DIRNAME) FILENAME
+#endif
+
+#ifndef DWARF2_FILE_TIME_NAME
+#define DWARF2_FILE_TIME_NAME(FILENAME,DIRNAME) 0
+#endif
+
+#ifndef DWARF2_FILE_SIZE_NAME
+#define DWARF2_FILE_SIZE_NAME(FILENAME,DIRNAME) 0
+#endif
+
+#ifndef DWARF2_VERSION
+#define DWARF2_VERSION 2
+#endif
+
+/* The .debug_aranges version has been 2 in DWARF version 2, 3 and 4. */
+#ifndef DWARF2_ARANGES_VERSION
+#define DWARF2_ARANGES_VERSION 2
+#endif
+
+/* This implementation outputs version 3 .debug_line information. */
+#ifndef DWARF2_LINE_VERSION
+#define DWARF2_LINE_VERSION 3
+#endif
+
#include "subsegs.h"
-#include "elf/dwarf2.h"
+#include "dwarf2.h"
/* Since we can't generate the prolog until the body is complete, we
use three different subsegments for .debug_line: one holding the
opcodes and variable-length operands cannot be used. If this macro is
nonzero, use the DW_LNS_fixed_advance_pc opcode instead. */
#ifndef DWARF2_USE_FIXED_ADVANCE_PC
-# define DWARF2_USE_FIXED_ADVANCE_PC 0
+# define DWARF2_USE_FIXED_ADVANCE_PC linkrelax
#endif
-/* First special line opcde - leave room for the standard opcodes.
+/* First special line opcode - leave room for the standard opcodes.
Note: If you want to change this, you'll have to update the
"standard_opcode_lengths" table that is emitted below in
out_debug_line(). */
/* The maximum address skip amount that can be encoded with a special op. */
#define MAX_SPECIAL_ADDR_DELTA SPECIAL_ADDR(255)
-struct line_entry {
+#ifndef TC_PARSE_CONS_RETURN_NONE
+#define TC_PARSE_CONS_RETURN_NONE BFD_RELOC_NONE
+#endif
+
+struct line_entry
+{
struct line_entry *next;
symbolS *label;
struct dwarf2_line_info loc;
};
-struct line_subseg {
+/* Don't change the offset of next in line_entry. set_or_check_view
+ calls in dwarf2_gen_line_info_1 depend on it. */
+static char unused[offsetof(struct line_entry, next) ? -1 : 1]
+ATTRIBUTE_UNUSED;
+
+struct line_subseg
+{
struct line_subseg *next;
subsegT subseg;
struct line_entry *head;
struct line_entry **ptail;
+ struct line_entry **pmove_tail;
};
-struct line_seg {
+struct line_seg
+{
struct line_seg *next;
segT seg;
struct line_subseg *head;
/* Collects data for all line table entries during assembly. */
static struct line_seg *all_segs;
+static struct line_seg **last_seg_ptr;
-struct file_entry {
+struct file_entry
+{
const char *filename;
unsigned int dir;
};
/* TRUE when we've seen a .loc directive recently. Used to avoid
doing work when there's nothing to do. */
-static bfd_boolean loc_directive_seen;
+bfd_boolean dwarf2_loc_directive_seen;
/* TRUE when we're supposed to set the basic block mark whenever a
label is seen. */
bfd_boolean dwarf2_loc_mark_labels;
/* Current location as indicated by the most recent .loc directive. */
-static struct dwarf2_line_info current = {
+static struct dwarf2_line_info current =
+{
1, 1, 0, 0,
- DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0
+ DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0,
+ 0, NULL
};
+/* This symbol is used to recognize view number forced resets in loc
+ lists. */
+static symbolS *force_reset_view;
+
+/* This symbol evaluates to an expression that, if nonzero, indicates
+ some view assert check failed. */
+static symbolS *view_assert_failed;
+
/* The size of an address on the target. */
static unsigned int sizeof_address;
\f
-static struct line_subseg *get_line_subseg (segT, subsegT);
static unsigned int get_filenum (const char *, unsigned int);
-static struct frag *first_frag_for_seg (segT);
-static struct frag *last_frag_for_seg (segT);
-static void out_byte (int);
-static void out_opcode (int);
-static void out_two (int);
-static void out_four (int);
-static void out_abbrev (int, int);
-static void out_uleb128 (addressT);
-static void out_sleb128 (addressT);
-static offsetT get_frag_fix (fragS *, segT);
-static void out_set_addr (symbolS *);
-static int size_inc_line_addr (int, addressT);
-static void emit_inc_line_addr (int, addressT, char *, int);
-static void out_inc_line_addr (int, addressT);
-static void out_fixed_inc_line_addr (int, symbolS *, symbolS *);
-static void relax_inc_line_addr (int, symbolS *, symbolS *);
-static void process_entries (segT, struct line_entry *);
-static void out_file_list (void);
-static void out_debug_line (segT);
-static void out_debug_aranges (segT, segT);
-static void out_debug_abbrev (segT);
-\f
+
#ifndef TC_DWARF2_EMIT_OFFSET
#define TC_DWARF2_EMIT_OFFSET generic_dwarf2_emit_offset
static void
generic_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
{
- expressionS expr;
+ expressionS exp;
- expr.X_op = O_symbol;
- expr.X_add_symbol = symbol;
- expr.X_add_number = 0;
- emit_expr (&expr, size);
+ memset (&exp, 0, sizeof exp);
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = symbol;
+ exp.X_add_number = 0;
+ emit_expr (&exp, size);
}
#endif
-/* Find or create an entry for SEG+SUBSEG in ALL_SEGS. */
+/* Find or create (if CREATE_P) an entry for SEG+SUBSEG in ALL_SEGS. */
static struct line_subseg *
-get_line_subseg (segT seg, subsegT subseg)
+get_line_subseg (segT seg, subsegT subseg, bfd_boolean create_p)
{
- static segT last_seg;
- static subsegT last_subseg;
- static struct line_subseg *last_line_subseg;
-
- struct line_seg **ps, *s;
- struct line_subseg **pss, *ss;
-
- if (seg == last_seg && subseg == last_subseg)
- return last_line_subseg;
-
- for (ps = &all_segs; (s = *ps) != NULL; ps = &s->next)
- if (s->seg == seg)
- goto found_seg;
+ struct line_seg *s = seg_info (seg)->dwarf2_line_seg;
+ struct line_subseg **pss, *lss;
- s = (struct line_seg *) xmalloc (sizeof (*s));
- s->next = NULL;
- s->seg = seg;
- s->head = NULL;
- *ps = s;
+ if (s == NULL)
+ {
+ if (!create_p)
+ return NULL;
+
+ s = XNEW (struct line_seg);
+ s->next = NULL;
+ s->seg = seg;
+ s->head = NULL;
+ *last_seg_ptr = s;
+ last_seg_ptr = &s->next;
+ seg_info (seg)->dwarf2_line_seg = s;
+ }
+ gas_assert (seg == s->seg);
- found_seg:
- for (pss = &s->head; (ss = *pss) != NULL ; pss = &ss->next)
+ for (pss = &s->head; (lss = *pss) != NULL ; pss = &lss->next)
{
- if (ss->subseg == subseg)
+ if (lss->subseg == subseg)
goto found_subseg;
- if (ss->subseg > subseg)
+ if (lss->subseg > subseg)
break;
}
- ss = (struct line_subseg *) xmalloc (sizeof (*ss));
- ss->next = *pss;
- ss->subseg = subseg;
- ss->head = NULL;
- ss->ptail = &ss->head;
- *pss = ss;
+ lss = XNEW (struct line_subseg);
+ lss->next = *pss;
+ lss->subseg = subseg;
+ lss->head = NULL;
+ lss->ptail = &lss->head;
+ lss->pmove_tail = &lss->head;
+ *pss = lss;
found_subseg:
- last_seg = seg;
- last_subseg = subseg;
- last_line_subseg = ss;
+ return lss;
+}
- return ss;
+/* (Un)reverse the line_entry list starting from H. */
+
+static struct line_entry *
+reverse_line_entry_list (struct line_entry *h)
+{
+ struct line_entry *p = NULL, *e, *n;
+
+ for (e = h; e; e = n)
+ {
+ n = e->next;
+ e->next = p;
+ p = e;
+ }
+ return p;
+}
+
+/* Compute the view for E based on the previous entry P. If we
+ introduce an (undefined) view symbol for P, and H is given (P must
+ be the tail in this case), introduce view symbols for earlier list
+ entries as well, until one of them is constant. */
+
+static void
+set_or_check_view (struct line_entry *e, struct line_entry *p,
+ struct line_entry *h)
+{
+ expressionS viewx;
+
+ memset (&viewx, 0, sizeof (viewx));
+ viewx.X_unsigned = 1;
+
+ /* First, compute !(E->label > P->label), to tell whether or not
+ we're to reset the view number. If we can't resolve it to a
+ constant, keep it symbolic. */
+ if (!p || (e->loc.view == force_reset_view && force_reset_view))
+ {
+ viewx.X_op = O_constant;
+ viewx.X_add_number = 0;
+ viewx.X_add_symbol = NULL;
+ viewx.X_op_symbol = NULL;
+ }
+ else
+ {
+ viewx.X_op = O_gt;
+ viewx.X_add_number = 0;
+ viewx.X_add_symbol = e->label;
+ viewx.X_op_symbol = p->label;
+ resolve_expression (&viewx);
+ if (viewx.X_op == O_constant)
+ viewx.X_add_number = !viewx.X_add_number;
+ else
+ {
+ viewx.X_add_symbol = make_expr_symbol (&viewx);
+ viewx.X_add_number = 0;
+ viewx.X_op_symbol = NULL;
+ viewx.X_op = O_logical_not;
+ }
+ }
+
+ if (S_IS_DEFINED (e->loc.view) && symbol_constant_p (e->loc.view))
+ {
+ expressionS *value = symbol_get_value_expression (e->loc.view);
+ /* We can't compare the view numbers at this point, because in
+ VIEWX we've only determined whether we're to reset it so
+ far. */
+ if (viewx.X_op == O_constant)
+ {
+ if (!value->X_add_number != !viewx.X_add_number)
+ as_bad (_("view number mismatch"));
+ }
+ /* Record the expression to check it later. It is the result of
+ a logical not, thus 0 or 1. We just add up all such deferred
+ expressions, and resolve it at the end. */
+ else if (!value->X_add_number)
+ {
+ symbolS *deferred = make_expr_symbol (&viewx);
+ if (view_assert_failed)
+ {
+ expressionS chk;
+
+ memset (&chk, 0, sizeof (chk));
+ chk.X_unsigned = 1;
+ chk.X_op = O_add;
+ chk.X_add_number = 0;
+ chk.X_add_symbol = view_assert_failed;
+ chk.X_op_symbol = deferred;
+ deferred = make_expr_symbol (&chk);
+ }
+ view_assert_failed = deferred;
+ }
+ }
+
+ if (viewx.X_op != O_constant || viewx.X_add_number)
+ {
+ expressionS incv;
+
+ if (!p->loc.view)
+ {
+ p->loc.view = symbol_temp_make ();
+ gas_assert (!S_IS_DEFINED (p->loc.view));
+ }
+
+ memset (&incv, 0, sizeof (incv));
+ incv.X_unsigned = 1;
+ incv.X_op = O_symbol;
+ incv.X_add_symbol = p->loc.view;
+ incv.X_add_number = 1;
+
+ if (viewx.X_op == O_constant)
+ {
+ gas_assert (viewx.X_add_number == 1);
+ viewx = incv;
+ }
+ else
+ {
+ viewx.X_add_symbol = make_expr_symbol (&viewx);
+ viewx.X_add_number = 0;
+ viewx.X_op_symbol = make_expr_symbol (&incv);
+ viewx.X_op = O_multiply;
+ }
+ }
+
+ if (!S_IS_DEFINED (e->loc.view))
+ {
+ symbol_set_value_expression (e->loc.view, &viewx);
+ S_SET_SEGMENT (e->loc.view, expr_section);
+ symbol_set_frag (e->loc.view, &zero_address_frag);
+ }
+
+ /* Define and attempt to simplify any earlier views needed to
+ compute E's. */
+ if (h && p && p->loc.view && !S_IS_DEFINED (p->loc.view))
+ {
+ struct line_entry *h2;
+ /* Reverse the list to avoid quadratic behavior going backwards
+ in a single-linked list. */
+ struct line_entry *r = reverse_line_entry_list (h);
+
+ gas_assert (r == p);
+ /* Set or check views until we find a defined or absent view. */
+ do
+ set_or_check_view (r, r->next, NULL);
+ while (r->next && r->next->loc.view && !S_IS_DEFINED (r->next->loc.view)
+ && (r = r->next));
+
+ /* Unreverse the list, so that we can go forward again. */
+ h2 = reverse_line_entry_list (p);
+ gas_assert (h2 == h);
+
+ /* Starting from the last view we just defined, attempt to
+ simplify the view expressions, until we do so to P. */
+ do
+ {
+ gas_assert (S_IS_DEFINED (r->loc.view));
+ resolve_expression (symbol_get_value_expression (r->loc.view));
+ }
+ while (r != p && (r = r->next));
+
+ /* Now that we've defined and computed all earlier views that might
+ be needed to compute E's, attempt to simplify it. */
+ resolve_expression (symbol_get_value_expression (e->loc.view));
+ }
}
/* Record an entry for LOC occurring at LABEL. */
static void
dwarf2_gen_line_info_1 (symbolS *label, struct dwarf2_line_info *loc)
{
- struct line_subseg *ss;
+ struct line_subseg *lss;
struct line_entry *e;
- e = (struct line_entry *) xmalloc (sizeof (*e));
+ e = XNEW (struct line_entry);
e->next = NULL;
e->label = label;
e->loc = *loc;
- ss = get_line_subseg (now_seg, now_subseg);
- *ss->ptail = e;
- ss->ptail = &e->next;
+ lss = get_line_subseg (now_seg, now_subseg, TRUE);
+
+ if (loc->view)
+ set_or_check_view (e,
+ !lss->head ? NULL : (struct line_entry *)lss->ptail,
+ lss->head);
+
+ *lss->ptail = e;
+ lss->ptail = &e->next;
}
/* Record an entry for LOC occurring at OFS within the current fragment. */
line = loc->line;
filenum = loc->filenum;
- sym = symbol_temp_new (now_seg, ofs, frag_now);
+ if (linkrelax)
+ {
+ char name[120];
+
+ /* Use a non-fake name for the line number location,
+ so that it can be referred to by relocations. */
+ sprintf (name, ".Loc.%u.%u", line, filenum);
+ sym = symbol_new (name, now_seg, ofs, frag_now);
+ }
+ else
+ sym = symbol_temp_new (now_seg, ofs, frag_now);
dwarf2_gen_line_info_1 (sym, loc);
}
{
if (debug_type == DEBUG_DWARF2)
{
- char *filename;
- as_where (&filename, &line->line);
+ const char *filename;
+
+ memset (line, 0, sizeof (*line));
+ filename = as_where (&line->line);
line->filenum = get_filenum (filename, 0);
line->column = 0;
line->flags = DWARF2_FLAG_IS_STMT;
line->isa = current.isa;
+ line->discriminator = current.discriminator;
+ line->view = NULL;
}
else
*line = current;
}
-/* A hook to allow the target backend to inform the line number state
+/* A hook to allow the target backend to inform the line number state
machine of isa changes when assembler debug info is enabled. */
void
{
struct dwarf2_line_info loc;
- if (loc_directive_seen)
- {
- /* Use the last location established by a .loc directive, not
- the value returned by dwarf2_where(). That calls as_where()
- which will return either the logical input file name (foo.c)
- or the physical input file name (foo.s) and not the file name
- specified in the most recent .loc directive (eg foo.h). */
- loc = current;
-
- /* Unless we generate DWARF2 debugging information for each
- assembler line, we only emit one line symbol for one LOC. */
- if (debug_type != DEBUG_DWARF2)
- loc_directive_seen = FALSE;
- }
- else if (debug_type != DEBUG_DWARF2)
+ if (debug_type != DEBUG_DWARF2
+ ? !dwarf2_loc_directive_seen
+ : !seen_at_least_1_file ())
return;
- else
- dwarf2_where (&loc);
+
+ dwarf2_where (&loc);
dwarf2_gen_line_info (frag_now_fix () - size, &loc);
+ dwarf2_consume_line_info ();
+}
+
+/* Move all previously-emitted line entries for the current position by
+ DELTA bytes. This function cannot be used to move the same entries
+ twice. */
+
+void
+dwarf2_move_insn (int delta)
+{
+ struct line_subseg *lss;
+ struct line_entry *e;
+ valueT now;
+
+ if (delta == 0)
+ return;
+
+ lss = get_line_subseg (now_seg, now_subseg, FALSE);
+ if (!lss)
+ return;
+
+ now = frag_now_fix ();
+ while ((e = *lss->pmove_tail))
+ {
+ if (S_GET_VALUE (e->label) == now)
+ S_SET_VALUE (e->label, now + delta);
+ lss->pmove_tail = &e->next;
+ }
+}
+
+/* Called after the current line information has been either used with
+ dwarf2_gen_line_info or saved with a machine instruction for later use.
+ This resets the state of the line number information to reflect that
+ it has been used. */
+
+void
+dwarf2_consume_line_info (void)
+{
+ /* Unless we generate DWARF2 debugging information for each
+ assembler line, we only emit one line symbol for one LOC. */
+ dwarf2_loc_directive_seen = FALSE;
current.flags &= ~(DWARF2_FLAG_BASIC_BLOCK
| DWARF2_FLAG_PROLOGUE_END
| DWARF2_FLAG_EPILOGUE_BEGIN);
+ current.discriminator = 0;
+ current.view = NULL;
}
/* Called for each (preferably code) label. If dwarf2_loc_mark_labels
return;
if (!(bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE))
return;
-
- if (debug_type == DEBUG_DWARF2)
- dwarf2_where (&loc);
- else
- {
- loc = current;
- loc_directive_seen = FALSE;
- }
+ if (files_in_use == 0 && debug_type != DEBUG_DWARF2)
+ return;
- loc.flags |= DWARF2_FLAG_BASIC_BLOCK;
+ dwarf2_where (&loc);
- current.flags &= ~(DWARF2_FLAG_BASIC_BLOCK
- | DWARF2_FLAG_PROLOGUE_END
- | DWARF2_FLAG_EPILOGUE_BEGIN);
+ loc.flags |= DWARF2_FLAG_BASIC_BLOCK;
dwarf2_gen_line_info_1 (label, &loc);
+ dwarf2_consume_line_info ();
}
/* Get a .debug_line file number for FILENAME. If NUM is nonzero,
if (num == 0 && last_used)
{
if (! files[last_used].dir
- && strcmp (filename, files[last_used].filename) == 0)
+ && filename_cmp (filename, files[last_used].filename) == 0)
return last_used;
if (files[last_used].dir
- && strncmp (filename, dirs[files[last_used].dir],
- last_used_dir_len) == 0
+ && filename_ncmp (filename, dirs[files[last_used].dir],
+ last_used_dir_len) == 0
&& IS_DIR_SEPARATOR (filename [last_used_dir_len])
- && strcmp (filename + last_used_dir_len + 1,
- files[last_used].filename) == 0)
+ && filename_cmp (filename + last_used_dir_len + 1,
+ files[last_used].filename) == 0)
return last_used;
}
dir = 0;
if (dir_len)
{
+#ifndef DWARF2_DIR_SHOULD_END_WITH_SEPARATOR
--dir_len;
+#endif
for (dir = 1; dir < dirs_in_use; ++dir)
- if (strncmp (filename, dirs[dir], dir_len) == 0
+ if (filename_ncmp (filename, dirs[dir], dir_len) == 0
&& dirs[dir][dir_len] == '\0')
break;
if (dir >= dirs_allocated)
{
dirs_allocated = dir + 32;
- dirs = (char **)
- xrealloc (dirs, (dir + 32) * sizeof (const char *));
+ dirs = XRESIZEVEC (char *, dirs, dirs_allocated);
}
- dirs[dir] = xmalloc (dir_len + 1);
- memcpy (dirs[dir], filename, dir_len);
- dirs[dir][dir_len] = '\0';
+ dirs[dir] = xmemdup0 (filename, dir_len);
dirs_in_use = dir + 1;
}
}
for (i = 1; i < files_in_use; ++i)
if (files[i].dir == dir
&& files[i].filename
- && strcmp (file, files[i].filename) == 0)
+ && filename_cmp (file, files[i].filename) == 0)
{
last_used = i;
last_used_dir_len = dir_len;
unsigned int old = files_allocated;
files_allocated = i + 32;
- files = (struct file_entry *)
- xrealloc (files, (i + 32) * sizeof (struct file_entry));
+ files = XRESIZEVEC (struct file_entry, files, files_allocated);
memset (files + old, 0, (i + 32 - old) * sizeof (struct file_entry));
}
- Pass .file "source.c" to s_app_file
- Handle .file 1 "source.c" by adding an entry to the DWARF-2 file table
- If an entry is added to the file table, return a pointer to the filename. */
+ If an entry is added to the file table, return a pointer to the filename. */
char *
-dwarf2_directive_file (int dummy ATTRIBUTE_UNUSED)
+dwarf2_directive_filename (void)
{
offsetT num;
char *filename;
return NULL;
}
+ /* A .file directive implies compiler generated debug information is
+ being supplied. Turn off gas generated debug info. */
+ debug_type = DEBUG_NONE;
+
if (num < (int) files_in_use && files[num].filename != 0)
{
as_bad (_("file number %ld already allocated"), (long) num);
return filename;
}
+/* Calls dwarf2_directive_filename, but discards its result.
+ Used in pseudo-op tables where the function result is ignored. */
+
+void
+dwarf2_directive_file (int dummy ATTRIBUTE_UNUSED)
+{
+ (void) dwarf2_directive_filename ();
+}
+
void
dwarf2_directive_loc (int dummy ATTRIBUTE_UNUSED)
{
/* If we see two .loc directives in a row, force the first one to be
output now. */
- if (loc_directive_seen)
+ if (dwarf2_loc_directive_seen)
dwarf2_emit_insn (0);
filenum = get_absolute_expression ();
current.filenum = filenum;
current.line = line;
+ current.discriminator = 0;
#ifndef NO_LISTING
if (listing)
{
size_t dir_len = strlen (dirs[files[filenum].dir]);
size_t file_len = strlen (files[filenum].filename);
- char *cp = (char *) alloca (dir_len + 1 + file_len + 1);
+ char *cp = XNEWVEC (char, dir_len + 1 + file_len + 1);
memcpy (cp, dirs[files[filenum].dir], dir_len);
INSERT_DIR_SEPARATOR (cp, dir_len);
memcpy (cp + dir_len + 1, files[filenum].filename, file_len);
cp[dir_len + file_len + 1] = '\0';
listing_source_file (cp);
+ free (cp);
}
else
listing_source_file (files[filenum].filename);
char *p, c;
offsetT value;
- p = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (& p);
if (strcmp (p, "basic_block") == 0)
{
}
else if (strcmp (p, "is_stmt") == 0)
{
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
value = get_absolute_expression ();
if (value == 0)
current.flags &= ~DWARF2_FLAG_IS_STMT;
}
else if (strcmp (p, "isa") == 0)
{
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
value = get_absolute_expression ();
if (value >= 0)
current.isa = value;
return;
}
}
+ else if (strcmp (p, "discriminator") == 0)
+ {
+ (void) restore_line_pointer (c);
+ value = get_absolute_expression ();
+ if (value >= 0)
+ current.discriminator = value;
+ else
+ {
+ as_bad (_("discriminator less than zero"));
+ return;
+ }
+ }
+ else if (strcmp (p, "view") == 0)
+ {
+ symbolS *sym;
+
+ (void) restore_line_pointer (c);
+ SKIP_WHITESPACE ();
+
+ if (ISDIGIT (*input_line_pointer)
+ || *input_line_pointer == '-')
+ {
+ bfd_boolean force_reset = *input_line_pointer == '-';
+
+ value = get_absolute_expression ();
+ if (value != 0)
+ {
+ as_bad (_("numeric view can only be asserted to zero"));
+ return;
+ }
+ if (force_reset && force_reset_view)
+ sym = force_reset_view;
+ else
+ {
+ sym = symbol_temp_new (absolute_section, value,
+ &zero_address_frag);
+ if (force_reset)
+ force_reset_view = sym;
+ }
+ }
+ else
+ {
+ char *name = read_symbol_name ();
+
+ if (!name)
+ return;
+ sym = symbol_find_or_make (name);
+ if (S_IS_DEFINED (sym) || symbol_equated_p (sym))
+ {
+ if (S_IS_VOLATILE (sym))
+ sym = symbol_clone (sym, 1);
+ else if (!S_CAN_BE_REDEFINED (sym))
+ {
+ as_bad (_("symbol `%s' is already defined"), name);
+ return;
+ }
+ }
+ S_SET_SEGMENT (sym, undefined_section);
+ S_SET_VALUE (sym, 0);
+ symbol_set_frag (sym, &zero_address_frag);
+ }
+ current.view = sym;
+ }
else
{
as_bad (_("unknown .loc sub-directive `%s'"), p);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
return;
}
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE_AFTER_NAME ();
}
demand_empty_rest_of_line ();
- loc_directive_seen = TRUE;
+ dwarf2_loc_directive_seen = TRUE;
+ debug_type = DEBUG_NONE;
+
+ /* If we were given a view id, emit the row right away. */
+ if (current.view)
+ dwarf2_emit_insn (0);
}
void
/* Emit a signed "little-endian base 128" number. */
static void
-out_sleb128 (addressT value)
+out_leb128 (addressT value)
{
output_leb128 (frag_more (sizeof_leb128 (value, 1)), value, 1);
}
static void
out_set_addr (symbolS *sym)
{
- expressionS expr;
+ expressionS exp;
+ memset (&exp, 0, sizeof exp);
out_opcode (DW_LNS_extended_op);
out_uleb128 (sizeof_address + 1);
out_opcode (DW_LNE_set_address);
- expr.X_op = O_symbol;
- expr.X_add_symbol = sym;
- expr.X_add_number = 0;
- emit_expr (&expr, sizeof_address);
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = sym;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_address);
}
-#if DWARF2_LINE_MIN_INSN_LENGTH > 1
static void scale_addr_delta (addressT *);
static void
scale_addr_delta (addressT *addr_delta)
{
static int printed_this = 0;
- if (*addr_delta % DWARF2_LINE_MIN_INSN_LENGTH != 0)
+ if (DWARF2_LINE_MIN_INSN_LENGTH > 1)
{
- if (!printed_this)
- as_bad("unaligned opcodes detected in executable segment");
- printed_this = 1;
+ if (*addr_delta % DWARF2_LINE_MIN_INSN_LENGTH != 0 && !printed_this)
+ {
+ as_bad("unaligned opcodes detected in executable segment");
+ printed_this = 1;
+ }
+ *addr_delta /= DWARF2_LINE_MIN_INSN_LENGTH;
}
- *addr_delta /= DWARF2_LINE_MIN_INSN_LENGTH;
}
-#else
-#define scale_addr_delta(A)
-#endif
/* Encode a pair of line and address skips as efficiently as possible.
Note that the line skip is signed, whereas the address skip is unsigned.
/* Line number sequences cannot go backward in addresses. This means
we've incorrectly ordered the statements in the sequence. */
- assert ((offsetT) addr_delta >= 0);
+ gas_assert ((offsetT) addr_delta >= 0);
/* Scale the address delta by the minimum instruction length. */
scale_addr_delta (&addr_delta);
*p++ = tmp;
done:
- assert (p == end);
+ gas_assert (p == end);
}
/* Handy routine to combine calls to the above two routines. */
/* Write out an alternative form of line and address skips using
DW_LNS_fixed_advance_pc opcodes. This uses more space than the default
- line and address information, but it helps support linker relaxation that
- changes the code offsets. */
+ line and address information, but it is required if linker relaxation
+ could change the code offsets. The following two routines *must* be
+ kept in sync. */
+#define ADDR_DELTA_LIMIT 50000
-static void
-out_fixed_inc_line_addr (int line_delta, symbolS *to_sym, symbolS *from_sym)
+static int
+size_fixed_inc_line_addr (int line_delta, addressT addr_delta)
{
- expressionS expr;
+ int len = 0;
/* INT_MAX is a signal that this is actually a DW_LNE_end_sequence. */
+ if (line_delta != INT_MAX)
+ len = 1 + sizeof_leb128 (line_delta, 1);
+
+ if (addr_delta > ADDR_DELTA_LIMIT)
+ {
+ /* DW_LNS_extended_op */
+ len += 1 + sizeof_leb128 (sizeof_address + 1, 0);
+ /* DW_LNE_set_address */
+ len += 1 + sizeof_address;
+ }
+ else
+ /* DW_LNS_fixed_advance_pc */
+ len += 3;
+
if (line_delta == INT_MAX)
+ /* DW_LNS_extended_op + DW_LNE_end_sequence */
+ len += 3;
+ else
+ /* DW_LNS_copy */
+ len += 1;
+
+ return len;
+}
+
+static void
+emit_fixed_inc_line_addr (int line_delta, addressT addr_delta, fragS *frag,
+ char *p, int len)
+{
+ expressionS *pexp;
+ char *end = p + len;
+
+ /* Line number sequences cannot go backward in addresses. This means
+ we've incorrectly ordered the statements in the sequence. */
+ gas_assert ((offsetT) addr_delta >= 0);
+
+ /* Verify that we have kept in sync with size_fixed_inc_line_addr. */
+ gas_assert (len == size_fixed_inc_line_addr (line_delta, addr_delta));
+
+ /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence. */
+ if (line_delta != INT_MAX)
{
- out_opcode (DW_LNS_fixed_advance_pc);
- expr.X_op = O_subtract;
- expr.X_add_symbol = to_sym;
- expr.X_op_symbol = from_sym;
- expr.X_add_number = 0;
- emit_expr (&expr, 2);
-
- out_opcode (DW_LNS_extended_op);
- out_byte (1);
- out_opcode (DW_LNE_end_sequence);
- return;
+ *p++ = DW_LNS_advance_line;
+ p += output_leb128 (p, line_delta, 1);
}
- out_opcode (DW_LNS_advance_line);
- out_sleb128 (line_delta);
+ pexp = symbol_get_value_expression (frag->fr_symbol);
- out_opcode (DW_LNS_fixed_advance_pc);
- expr.X_op = O_subtract;
- expr.X_add_symbol = to_sym;
- expr.X_op_symbol = from_sym;
- expr.X_add_number = 0;
- emit_expr (&expr, 2);
+ /* The DW_LNS_fixed_advance_pc opcode has a 2-byte operand so it can
+ advance the address by at most 64K. Linker relaxation (without
+ which this function would not be used) could change the operand by
+ an unknown amount. If the address increment is getting close to
+ the limit, just reset the address. */
+ if (addr_delta > ADDR_DELTA_LIMIT)
+ {
+ symbolS *to_sym;
+ expressionS exp;
+
+ memset (&exp, 0, sizeof exp);
+ gas_assert (pexp->X_op == O_subtract);
+ to_sym = pexp->X_add_symbol;
+
+ *p++ = DW_LNS_extended_op;
+ p += output_leb128 (p, sizeof_address + 1, 0);
+ *p++ = DW_LNE_set_address;
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = to_sym;
+ exp.X_add_number = 0;
+ emit_expr_fix (&exp, sizeof_address, frag, p, TC_PARSE_CONS_RETURN_NONE);
+ p += sizeof_address;
+ }
+ else
+ {
+ *p++ = DW_LNS_fixed_advance_pc;
+ emit_expr_fix (pexp, 2, frag, p, TC_PARSE_CONS_RETURN_NONE);
+ p += 2;
+ }
+
+ if (line_delta == INT_MAX)
+ {
+ *p++ = DW_LNS_extended_op;
+ *p++ = 1;
+ *p++ = DW_LNE_end_sequence;
+ }
+ else
+ *p++ = DW_LNS_copy;
- out_opcode (DW_LNS_copy);
+ gas_assert (p == end);
}
/* Generate a variant frag that we can use to relax address/line
static void
relax_inc_line_addr (int line_delta, symbolS *to_sym, symbolS *from_sym)
{
- expressionS expr;
+ expressionS exp;
int max_chars;
- expr.X_op = O_subtract;
- expr.X_add_symbol = to_sym;
- expr.X_op_symbol = from_sym;
- expr.X_add_number = 0;
+ memset (&exp, 0, sizeof exp);
+ exp.X_op = O_subtract;
+ exp.X_add_symbol = to_sym;
+ exp.X_op_symbol = from_sym;
+ exp.X_add_number = 0;
/* The maximum size of the frag is the line delta with a maximum
sized address delta. */
- max_chars = size_inc_line_addr (line_delta, -DWARF2_LINE_MIN_INSN_LENGTH);
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ max_chars = size_fixed_inc_line_addr (line_delta,
+ -DWARF2_LINE_MIN_INSN_LENGTH);
+ else
+ max_chars = size_inc_line_addr (line_delta, -DWARF2_LINE_MIN_INSN_LENGTH);
frag_var (rs_dwarf2dbg, max_chars, max_chars, 1,
- make_expr_symbol (&expr), line_delta, NULL);
+ make_expr_symbol (&exp), line_delta, NULL);
}
/* The function estimates the size of a rs_dwarf2dbg variant frag
int size;
addr_delta = resolve_symbol_value (frag->fr_symbol);
- size = size_inc_line_addr (frag->fr_offset, addr_delta);
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ size = size_fixed_inc_line_addr (frag->fr_offset, addr_delta);
+ else
+ size = size_inc_line_addr (frag->fr_offset, addr_delta);
frag->fr_subtype = size;
{
offsetT addr_diff;
- addr_diff = resolve_symbol_value (frag->fr_symbol);
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ {
+ /* If linker relaxation is enabled then the distance between the two
+ symbols in the frag->fr_symbol expression might change. Hence we
+ cannot rely upon the value computed by resolve_symbol_value.
+ Instead we leave the expression unfinalized and allow
+ emit_fixed_inc_line_addr to create a fixup (which later becomes a
+ relocation) that will allow the linker to correctly compute the
+ actual address difference. We have to use a fixed line advance for
+ this as we cannot (easily) relocate leb128 encoded values. */
+ int saved_finalize_syms = finalize_syms;
+
+ finalize_syms = 0;
+ addr_diff = resolve_symbol_value (frag->fr_symbol);
+ finalize_syms = saved_finalize_syms;
+ }
+ else
+ addr_diff = resolve_symbol_value (frag->fr_symbol);
/* fr_var carries the max_chars that we created the fragment with.
fr_subtype carries the current expected length. We must, of
course, have allocated enough memory earlier. */
- assert (frag->fr_var >= (int) frag->fr_subtype);
+ gas_assert (frag->fr_var >= (int) frag->fr_subtype);
- emit_inc_line_addr (frag->fr_offset, addr_diff,
- frag->fr_literal + frag->fr_fix, frag->fr_subtype);
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ emit_fixed_inc_line_addr (frag->fr_offset, addr_diff, frag,
+ frag->fr_literal + frag->fr_fix,
+ frag->fr_subtype);
+ else
+ emit_inc_line_addr (frag->fr_offset, addr_diff,
+ frag->fr_literal + frag->fr_fix, frag->fr_subtype);
frag->fr_fix += frag->fr_subtype;
frag->fr_type = rs_fill;
symbolS *last_lab = NULL, *lab;
struct line_entry *next;
+ if (flag_dwarf_sections)
+ {
+ char * name;
+ const char * sec_name;
+
+ /* Switch to the relevant sub-section before we start to emit
+ the line number table.
+
+ FIXME: These sub-sections do not have a normal Line Number
+ Program Header, thus strictly speaking they are not valid
+ DWARF sections. Unfortunately the DWARF standard assumes
+ a one-to-one relationship between compilation units and
+ line number tables. Thus we have to have a .debug_line
+ section, as well as our sub-sections, and we have to ensure
+ that all of the sub-sections are merged into a proper
+ .debug_line section before a debugger sees them. */
+
+ sec_name = bfd_get_section_name (stdoutput, seg);
+ if (strcmp (sec_name, ".text") != 0)
+ {
+ name = concat (".debug_line", sec_name, (char *) NULL);
+ subseg_set (subseg_get (name, FALSE), 0);
+ }
+ else
+ /* Don't create a .debug_line.text section -
+ that is redundant. Instead just switch back to the
+ normal .debug_line section. */
+ subseg_set (subseg_get (".debug_line", FALSE), 0);
+ }
+
do
{
int line_delta;
out_uleb128 (column);
}
+ if (e->loc.discriminator != 0)
+ {
+ out_opcode (DW_LNS_extended_op);
+ out_leb128 (1 + sizeof_leb128 (e->loc.discriminator, 0));
+ out_opcode (DW_LNE_set_discriminator);
+ out_uleb128 (e->loc.discriminator);
+ }
+
if (isa != e->loc.isa)
{
isa = e->loc.isa;
frag = symbol_get_frag (lab);
frag_ofs = S_GET_VALUE (lab);
- if (last_frag == NULL)
+ if (last_frag == NULL
+ || (e->loc.view == force_reset_view && force_reset_view
+ /* If we're going to reset the view, but we know we're
+ advancing the PC, we don't have to force with
+ set_address. We know we do when we're at the same
+ address of the same frag, and we know we might when
+ we're in the beginning of a frag, and we were at the
+ end of the previous frag. */
+ && (frag == last_frag
+ ? (last_frag_ofs == frag_ofs)
+ : (frag_ofs == 0
+ && ((offsetT)last_frag_ofs
+ >= get_frag_fix (last_frag, seg))))))
{
out_set_addr (lab);
out_inc_line_addr (line_delta, 0);
}
- else if (DWARF2_USE_FIXED_ADVANCE_PC)
- out_fixed_inc_line_addr (line_delta, lab, last_lab);
- else if (frag == last_frag)
+ else if (frag == last_frag && ! DWARF2_USE_FIXED_ADVANCE_PC)
out_inc_line_addr (line_delta, frag_ofs - last_frag_ofs);
else
relax_inc_line_addr (line_delta, lab, last_lab);
/* Emit a DW_LNE_end_sequence for the end of the section. */
frag = last_frag_for_seg (seg);
frag_ofs = get_frag_fix (frag, seg);
- if (DWARF2_USE_FIXED_ADVANCE_PC)
- {
- lab = symbol_temp_new (seg, frag_ofs, frag);
- out_fixed_inc_line_addr (INT_MAX, lab, last_lab);
- }
- else if (frag == last_frag)
+ if (frag == last_frag && ! DWARF2_USE_FIXED_ADVANCE_PC)
out_inc_line_addr (INT_MAX, frag_ofs - last_frag_ofs);
else
{
for (i = 1; i < files_in_use; ++i)
{
+ const char *fullfilename;
+
if (files[i].filename == NULL)
{
as_bad (_("unassigned file number %ld"), (long) i);
continue;
}
- size = strlen (files[i].filename) + 1;
+ fullfilename = DWARF2_FILE_NAME (files[i].filename,
+ files[i].dir ? dirs [files [i].dir] : "");
+ size = strlen (fullfilename) + 1;
cp = frag_more (size);
- memcpy (cp, files[i].filename, size);
+ memcpy (cp, fullfilename, size);
out_uleb128 (files[i].dir); /* directory number */
- out_uleb128 (0); /* last modification timestamp */
- out_uleb128 (0); /* filesize */
+ /* Output the last modification timestamp. */
+ out_uleb128 (DWARF2_FILE_TIME_NAME (files[i].filename,
+ files[i].dir ? dirs [files [i].dir] : ""));
+ /* Output the filesize. */
+ out_uleb128 (DWARF2_FILE_SIZE_NAME (files[i].filename,
+ files[i].dir ? dirs [files [i].dir] : ""));
}
/* Terminate filename list. */
out_byte (0);
}
-/* Emit the collected .debug_line data. */
+/* Switch to SEC and output a header length field. Return the size of
+ offsets used in SEC. The caller must set EXPR->X_add_symbol value
+ to the end of the section. EXPR->X_add_number will be set to the
+ negative size of the header. */
-static void
-out_debug_line (segT line_seg)
+static int
+out_header (asection *sec, expressionS *exp)
{
- expressionS expr;
- symbolS *line_start;
- symbolS *prologue_end;
- symbolS *line_end;
- struct line_seg *s;
- enum dwarf2_format d2f;
- int sizeof_offset;
-
- subseg_set (line_seg, 0);
+ symbolS *start_sym;
+ symbolS *end_sym;
- line_start = symbol_temp_new_now ();
- prologue_end = symbol_temp_make ();
- line_end = symbol_temp_make ();
+ subseg_set (sec, 0);
- /* Total length of the information for this compilation unit. */
- expr.X_op = O_subtract;
- expr.X_add_symbol = line_end;
- expr.X_op_symbol = line_start;
-
- d2f = DWARF2_FORMAT ();
- if (d2f == dwarf2_format_32bit)
+ if (flag_dwarf_sections)
{
- expr.X_add_number = -4;
- emit_expr (&expr, 4);
- sizeof_offset = 4;
+ /* If we are going to put the start and end symbols in different
+ sections, then we need real symbols, not just fake, local ones. */
+ frag_now_fix ();
+ start_sym = symbol_make (".Ldebug_line_start");
+ end_sym = symbol_make (".Ldebug_line_end");
+ symbol_set_value_now (start_sym);
}
- else if (d2f == dwarf2_format_64bit)
- {
- expr.X_add_number = -12;
- out_four (-1);
- emit_expr (&expr, 8);
- sizeof_offset = 8;
- }
- else if (d2f == dwarf2_format_64bit_irix)
+ else
{
- expr.X_add_number = -8;
- emit_expr (&expr, 8);
- sizeof_offset = 8;
+ start_sym = symbol_temp_new_now ();
+ end_sym = symbol_temp_make ();
}
- else
+
+ /* Total length of the information. */
+ exp->X_op = O_subtract;
+ exp->X_add_symbol = end_sym;
+ exp->X_op_symbol = start_sym;
+
+ switch (DWARF2_FORMAT (sec))
{
- as_fatal (_("internal error: unknown dwarf2 format"));
+ case dwarf2_format_32bit:
+ exp->X_add_number = -4;
+ emit_expr (exp, 4);
+ return 4;
+
+ case dwarf2_format_64bit:
+ exp->X_add_number = -12;
+ out_four (-1);
+ emit_expr (exp, 8);
+ return 8;
+
+ case dwarf2_format_64bit_irix:
+ exp->X_add_number = -8;
+ emit_expr (exp, 8);
+ return 8;
}
+ as_fatal (_("internal error: unknown dwarf2 format"));
+ return 0;
+}
+
+/* Emit the collected .debug_line data. */
+
+static void
+out_debug_line (segT line_seg)
+{
+ expressionS exp;
+ symbolS *prologue_start, *prologue_end;
+ symbolS *line_end;
+ struct line_seg *s;
+ int sizeof_offset;
+
+ memset (&exp, 0, sizeof exp);
+ sizeof_offset = out_header (line_seg, &exp);
+ line_end = exp.X_add_symbol;
+
/* Version. */
- out_two (2);
+ out_two (DWARF2_LINE_VERSION);
/* Length of the prologue following this length. */
- expr.X_op = O_subtract;
- expr.X_add_symbol = prologue_end;
- expr.X_op_symbol = line_start;
- expr.X_add_number = - (4 + 2 + 4);
- emit_expr (&expr, sizeof_offset);
+ prologue_start = symbol_temp_make ();
+ prologue_end = symbol_temp_make ();
+ exp.X_op = O_subtract;
+ exp.X_add_symbol = prologue_end;
+ exp.X_op_symbol = prologue_start;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_offset);
+ symbol_set_value_now (prologue_start);
/* Parameters of the state machine. */
out_byte (DWARF2_LINE_MIN_INSN_LENGTH);
/* For each section, emit a statement program. */
for (s = all_segs; s; s = s->next)
- process_entries (s->seg, s->head->head);
+ if (SEG_NORMAL (s->seg))
+ process_entries (s->seg, s->head->head);
+ else
+ as_warn ("dwarf line number information for %s ignored",
+ segment_name (s->seg));
+
+ if (flag_dwarf_sections)
+ /* We have to switch to the special .debug_line_end section
+ before emitting the end-of-debug_line symbol. The linker
+ script arranges for this section to be placed after all the
+ (potentially garbage collected) .debug_line.<foo> sections.
+ This section contains the line_end symbol which is used to
+ compute the size of the linked .debug_line section, as seen
+ in the DWARF Line Number header. */
+ subseg_set (subseg_get (".debug_line_end", FALSE), 0);
symbol_set_value_now (line_end);
}
{
unsigned int addr_size = sizeof_address;
struct line_seg *s;
- expressionS expr;
+ expressionS exp;
unsigned int i;
+ memset (&exp, 0, sizeof exp);
subseg_set (ranges_seg, 0);
/* Base Address Entry. */
- for (i = 0; i < addr_size; i++)
+ for (i = 0; i < addr_size; i++)
out_byte (0xff);
- for (i = 0; i < addr_size; i++)
+ for (i = 0; i < addr_size; i++)
out_byte (0);
/* Range List Entry. */
end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
s->text_end = end;
- expr.X_op = O_symbol;
- expr.X_add_symbol = beg;
- expr.X_add_number = 0;
- emit_expr (&expr, addr_size);
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = beg;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
- expr.X_op = O_symbol;
- expr.X_add_symbol = end;
- expr.X_add_number = 0;
- emit_expr (&expr, addr_size);
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = end;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
}
/* End of Range Entry. */
- for (i = 0; i < addr_size; i++)
+ for (i = 0; i < addr_size; i++)
out_byte (0);
- for (i = 0; i < addr_size; i++)
+ for (i = 0; i < addr_size; i++)
out_byte (0);
}
out_debug_aranges (segT aranges_seg, segT info_seg)
{
unsigned int addr_size = sizeof_address;
- addressT size, skip;
+ offsetT size;
struct line_seg *s;
- expressionS expr;
+ expressionS exp;
+ symbolS *aranges_end;
char *p;
+ int sizeof_offset;
- size = 4 + 2 + 4 + 1 + 1;
-
- skip = 2 * addr_size - (size & (2 * addr_size - 1));
- if (skip == 2 * addr_size)
- skip = 0;
- size += skip;
-
- for (s = all_segs; s; s = s->next)
- size += 2 * addr_size;
-
- size += 2 * addr_size;
-
- subseg_set (aranges_seg, 0);
-
- /* Length of the compilation unit. */
- out_four (size - 4);
+ memset (&exp, 0, sizeof exp);
+ sizeof_offset = out_header (aranges_seg, &exp);
+ aranges_end = exp.X_add_symbol;
+ size = -exp.X_add_number;
/* Version. */
- out_two (2);
+ out_two (DWARF2_ARANGES_VERSION);
+ size += 2;
/* Offset to .debug_info. */
- /* ??? sizeof_offset */
- TC_DWARF2_EMIT_OFFSET (section_symbol (info_seg), 4);
+ TC_DWARF2_EMIT_OFFSET (section_symbol (info_seg), sizeof_offset);
+ size += sizeof_offset;
/* Size of an address (offset portion). */
out_byte (addr_size);
+ size++;
/* Size of a segment descriptor. */
out_byte (0);
+ size++;
/* Align the header. */
- if (skip)
- frag_align (ffs (2 * addr_size) - 1, 0, 0);
+ while ((size++ % (2 * addr_size)) > 0)
+ out_byte (0);
for (s = all_segs; s; s = s->next)
{
end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
s->text_end = end;
- expr.X_op = O_symbol;
- expr.X_add_symbol = beg;
- expr.X_add_number = 0;
- emit_expr (&expr, addr_size);
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = beg;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
- expr.X_op = O_subtract;
- expr.X_add_symbol = end;
- expr.X_op_symbol = beg;
- expr.X_add_number = 0;
- emit_expr (&expr, addr_size);
+ exp.X_op = O_subtract;
+ exp.X_add_symbol = end;
+ exp.X_op_symbol = beg;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
}
p = frag_more (2 * addr_size);
md_number_to_chars (p, 0, addr_size);
md_number_to_chars (p + addr_size, 0, addr_size);
+
+ symbol_set_value_now (aranges_end);
}
/* Emit data for .debug_abbrev. Note that this must be kept in
sync with out_debug_info below. */
static void
-out_debug_abbrev (segT abbrev_seg)
+out_debug_abbrev (segT abbrev_seg,
+ segT info_seg ATTRIBUTE_UNUSED,
+ segT line_seg ATTRIBUTE_UNUSED)
{
subseg_set (abbrev_seg, 0);
out_uleb128 (1);
out_uleb128 (DW_TAG_compile_unit);
out_byte (DW_CHILDREN_no);
- out_abbrev (DW_AT_stmt_list, DW_FORM_data4);
+ if (DWARF2_FORMAT (line_seg) == dwarf2_format_32bit)
+ out_abbrev (DW_AT_stmt_list, DW_FORM_data4);
+ else
+ out_abbrev (DW_AT_stmt_list, DW_FORM_data8);
if (all_segs->next == NULL)
{
out_abbrev (DW_AT_low_pc, DW_FORM_addr);
- out_abbrev (DW_AT_high_pc, DW_FORM_addr);
+ if (DWARF2_VERSION < 4)
+ out_abbrev (DW_AT_high_pc, DW_FORM_addr);
+ else
+ out_abbrev (DW_AT_high_pc, (sizeof_address == 4
+ ? DW_FORM_data4 : DW_FORM_data8));
}
else
{
- if (DWARF2_FORMAT () == dwarf2_format_32bit)
+ if (DWARF2_FORMAT (info_seg) == dwarf2_format_32bit)
out_abbrev (DW_AT_ranges, DW_FORM_data4);
else
out_abbrev (DW_AT_ranges, DW_FORM_data8);
}
- out_abbrev (DW_AT_name, DW_FORM_string);
- out_abbrev (DW_AT_comp_dir, DW_FORM_string);
- out_abbrev (DW_AT_producer, DW_FORM_string);
+ out_abbrev (DW_AT_name, DW_FORM_strp);
+ out_abbrev (DW_AT_comp_dir, DW_FORM_strp);
+ out_abbrev (DW_AT_producer, DW_FORM_strp);
out_abbrev (DW_AT_language, DW_FORM_data2);
out_abbrev (0, 0);
/* Emit a description of this compilation unit for .debug_info. */
static void
-out_debug_info (segT info_seg, segT abbrev_seg, segT line_seg, segT ranges_seg)
+out_debug_info (segT info_seg, segT abbrev_seg, segT line_seg, segT ranges_seg,
+ symbolS *name_sym, symbolS *comp_dir_sym, symbolS *producer_sym)
{
- char producer[128];
- const char *comp_dir;
- const char *dirname;
- expressionS expr;
- symbolS *info_start;
+ expressionS exp;
symbolS *info_end;
- char *p;
- int len;
- enum dwarf2_format d2f;
int sizeof_offset;
- subseg_set (info_seg, 0);
-
- info_start = symbol_temp_new_now ();
- info_end = symbol_temp_make ();
-
- /* Compilation Unit length. */
- expr.X_op = O_subtract;
- expr.X_add_symbol = info_end;
- expr.X_op_symbol = info_start;
-
- d2f = DWARF2_FORMAT ();
- if (d2f == dwarf2_format_32bit)
- {
- expr.X_add_number = -4;
- emit_expr (&expr, 4);
- sizeof_offset = 4;
- }
- else if (d2f == dwarf2_format_64bit)
- {
- expr.X_add_number = -12;
- out_four (-1);
- emit_expr (&expr, 8);
- sizeof_offset = 8;
- }
- else if (d2f == dwarf2_format_64bit_irix)
- {
- expr.X_add_number = -8;
- emit_expr (&expr, 8);
- sizeof_offset = 8;
- }
- else
- {
- as_fatal (_("internal error: unknown dwarf2 format"));
- }
+ memset (&exp, 0, sizeof exp);
+ sizeof_offset = out_header (info_seg, &exp);
+ info_end = exp.X_add_symbol;
/* DWARF version. */
- out_two (2);
+ out_two (DWARF2_VERSION);
/* .debug_abbrev offset */
TC_DWARF2_EMIT_OFFSET (section_symbol (abbrev_seg), sizeof_offset);
out_uleb128 (1);
/* DW_AT_stmt_list */
- /* ??? sizeof_offset */
- TC_DWARF2_EMIT_OFFSET (section_symbol (line_seg), 4);
+ TC_DWARF2_EMIT_OFFSET (section_symbol (line_seg),
+ (DWARF2_FORMAT (line_seg) == dwarf2_format_32bit
+ ? 4 : 8));
/* These two attributes are emitted if all of the code is contiguous. */
if (all_segs->next == NULL)
{
/* DW_AT_low_pc */
- expr.X_op = O_symbol;
- expr.X_add_symbol = all_segs->text_start;
- expr.X_add_number = 0;
- emit_expr (&expr, sizeof_address);
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = all_segs->text_start;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_address);
/* DW_AT_high_pc */
- expr.X_op = O_symbol;
- expr.X_add_symbol = all_segs->text_end;
- expr.X_add_number = 0;
- emit_expr (&expr, sizeof_address);
+ if (DWARF2_VERSION < 4)
+ exp.X_op = O_symbol;
+ else
+ {
+ exp.X_op = O_subtract;
+ exp.X_op_symbol = all_segs->text_start;
+ }
+ exp.X_add_symbol = all_segs->text_end;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_address);
}
else
{
TC_DWARF2_EMIT_OFFSET (section_symbol (ranges_seg), sizeof_offset);
}
+ /* DW_AT_name, DW_AT_comp_dir and DW_AT_producer. Symbols in .debug_str
+ setup in out_debug_str below. */
+ TC_DWARF2_EMIT_OFFSET (name_sym, sizeof_offset);
+ TC_DWARF2_EMIT_OFFSET (comp_dir_sym, sizeof_offset);
+ TC_DWARF2_EMIT_OFFSET (producer_sym, sizeof_offset);
+
+ /* DW_AT_language. Yes, this is probably not really MIPS, but the
+ dwarf2 draft has no standard code for assembler. */
+ out_two (DW_LANG_Mips_Assembler);
+
+ symbol_set_value_now (info_end);
+}
+
+/* Emit the three debug strings needed in .debug_str and setup symbols
+ to them for use in out_debug_info. */
+static void
+out_debug_str (segT str_seg, symbolS **name_sym, symbolS **comp_dir_sym,
+ symbolS **producer_sym)
+{
+ char producer[128];
+ const char *comp_dir;
+ const char *dirname;
+ char *p;
+ int len;
+
+ subseg_set (str_seg, 0);
+
/* DW_AT_name. We don't have the actual file name that was present
on the command line, so assume files[1] is the main input file.
We're not supposed to get called unless at least one line number
entry was emitted, so this should always be defined. */
- if (!files || files_in_use < 1)
+ *name_sym = symbol_temp_new_now ();
+ if (files_in_use == 0)
abort ();
if (files[1].dir)
{
dirname = remap_debug_filename (dirs[files[1].dir]);
len = strlen (dirname);
+#ifdef TE_VMS
+ /* Already has trailing slash. */
+ p = frag_more (len);
+ memcpy (p, dirname, len);
+#else
p = frag_more (len + 1);
memcpy (p, dirname, len);
INSERT_DIR_SEPARATOR (p, len);
+#endif
}
len = strlen (files[1].filename) + 1;
p = frag_more (len);
memcpy (p, files[1].filename, len);
/* DW_AT_comp_dir */
+ *comp_dir_sym = symbol_temp_new_now ();
comp_dir = remap_debug_filename (getpwd ());
len = strlen (comp_dir) + 1;
p = frag_more (len);
memcpy (p, comp_dir, len);
/* DW_AT_producer */
+ *producer_sym = symbol_temp_new_now ();
sprintf (producer, "GNU AS %s", VERSION);
len = strlen (producer) + 1;
p = frag_more (len);
memcpy (p, producer, len);
+}
- /* DW_AT_language. Yes, this is probably not really MIPS, but the
- dwarf2 draft has no standard code for assembler. */
- out_two (DW_LANG_Mips_Assembler);
-
- symbol_set_value_now (info_end);
+void
+dwarf2_init (void)
+{
+ last_seg_ptr = &all_segs;
}
+
/* Finish the dwarf2 debug sections. We emit .debug.line if there
were any .file/.loc directives, or --gdwarf2 was given, or if the
- file has a non-empty .debug_info section. If we emit .debug_line,
- and the .debug_info section is empty, we also emit .debug_info,
- .debug_aranges and .debug_abbrev. ALL_SEGS will be non-null if
- there were any .file/.loc directives, or --gdwarf2 was given and
- there were any located instructions emitted. */
+ file has a non-empty .debug_info section and an empty .debug_line
+ section. If we emit .debug_line, and the .debug_info section is
+ empty, we also emit .debug_info, .debug_aranges and .debug_abbrev.
+ ALL_SEGS will be non-null if there were any .file/.loc directives,
+ or --gdwarf2 was given and there were any located instructions
+ emitted. */
void
dwarf2_finish (void)
struct line_seg *s;
segT info_seg;
int emit_other_sections = 0;
+ int empty_debug_line = 0;
info_seg = bfd_get_section_by_name (stdoutput, ".debug_info");
emit_other_sections = info_seg == NULL || !seg_not_empty_p (info_seg);
- if (!all_segs && emit_other_sections)
- /* There is no line information and no non-empty .debug_info
- section. */
+ line_seg = bfd_get_section_by_name (stdoutput, ".debug_line");
+ empty_debug_line = line_seg == NULL || !seg_not_empty_p (line_seg);
+
+ /* We can't construct a new debug_line section if we already have one.
+ Give an error. */
+ if (all_segs && !empty_debug_line)
+ as_fatal ("duplicate .debug_line sections");
+
+ if ((!all_segs && emit_other_sections)
+ || (!emit_other_sections && !empty_debug_line))
+ /* If there is no line information and no non-empty .debug_info
+ section, or if there is both a non-empty .debug_info and a non-empty
+ .debug_line, then we do nothing. */
return;
/* Calculate the size of an address for the target machine. */
/* For each subsection, chain the debug entries together. */
for (s = all_segs; s; s = s->next)
{
- struct line_subseg *ss = s->head;
- struct line_entry **ptail = ss->ptail;
+ struct line_subseg *lss = s->head;
+ struct line_entry **ptail = lss->ptail;
- while ((ss = ss->next) != NULL)
+ while ((lss = lss->next) != NULL)
{
- *ptail = ss->head;
- ptail = ss->ptail;
+ *ptail = lss->head;
+ ptail = lss->ptail;
}
}
out_debug_line (line_seg);
/* If this is assembler generated line info, and there is no
- debug_info already, we need .debug_info and .debug_abbrev
- sections as well. */
+ debug_info already, we need .debug_info, .debug_abbrev and
+ .debug_str sections as well. */
if (emit_other_sections)
{
segT abbrev_seg;
segT aranges_seg;
segT ranges_seg;
+ segT str_seg;
+ symbolS *name_sym, *comp_dir_sym, *producer_sym;
+
+ gas_assert (all_segs);
- assert (all_segs);
-
info_seg = subseg_new (".debug_info", 0);
abbrev_seg = subseg_new (".debug_abbrev", 0);
aranges_seg = subseg_new (".debug_aranges", 0);
+ str_seg = subseg_new (".debug_str", 0);
bfd_set_section_flags (stdoutput, info_seg,
SEC_READONLY | SEC_DEBUGGING);
SEC_READONLY | SEC_DEBUGGING);
bfd_set_section_flags (stdoutput, aranges_seg,
SEC_READONLY | SEC_DEBUGGING);
+ bfd_set_section_flags (stdoutput, str_seg,
+ (SEC_READONLY | SEC_DEBUGGING
+ | SEC_MERGE | SEC_STRINGS));
+ str_seg->entsize = 1;
record_alignment (aranges_seg, ffs (2 * sizeof_address) - 1);
else
{
ranges_seg = subseg_new (".debug_ranges", 0);
- bfd_set_section_flags (stdoutput, ranges_seg,
+ bfd_set_section_flags (stdoutput, ranges_seg,
SEC_READONLY | SEC_DEBUGGING);
record_alignment (ranges_seg, ffs (2 * sizeof_address) - 1);
out_debug_ranges (ranges_seg);
}
out_debug_aranges (aranges_seg, info_seg);
- out_debug_abbrev (abbrev_seg);
- out_debug_info (info_seg, abbrev_seg, line_seg, ranges_seg);
+ out_debug_abbrev (abbrev_seg, info_seg, line_seg);
+ out_debug_str (str_seg, &name_sym, &comp_dir_sym, &producer_sym);
+ out_debug_info (info_seg, abbrev_seg, line_seg, ranges_seg,
+ name_sym, comp_dir_sym, producer_sym);
+ }
+}
+
+/* Perform any deferred checks pertaining to debug information. */
+
+void
+dwarf2dbg_final_check (void)
+{
+ /* Perform reset-view checks. Don't evaluate view_assert_failed
+ recursively: it could be very deep. It's a chain of adds, with
+ each chain element pointing to the next in X_add_symbol, and
+ holding the check value in X_op_symbol. */
+ while (view_assert_failed)
+ {
+ expressionS *exp;
+ symbolS *sym;
+ offsetT failed;
+
+ gas_assert (!symbol_resolved_p (view_assert_failed));
+
+ exp = symbol_get_value_expression (view_assert_failed);
+ sym = view_assert_failed;
+
+ /* If view_assert_failed looks like a compound check in the
+ chain, break it up. */
+ if (exp->X_op == O_add && exp->X_add_number == 0 && exp->X_unsigned)
+ {
+ view_assert_failed = exp->X_add_symbol;
+ sym = exp->X_op_symbol;
+ }
+ else
+ view_assert_failed = NULL;
+
+ failed = resolve_symbol_value (sym);
+ if (!symbol_resolved_p (sym) || failed)
+ {
+ as_bad (_("view number mismatch"));
+ break;
+ }
}
}