/* input_scrub.c - Break up input buffers into whole numbers of lines.
- Copyright (C) 1987, 1990, 1991 Free Software Foundation, Inc.
-
+ Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 2000, 2001, 2003, 2005, 2006, 2007, 2008
+ Free Software Foundation, Inc.
+
This file is part of GAS, the GNU Assembler.
-
+
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
-
+
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
-#include <errno.h> /* Need this to make errno declaration right */
#include "as.h"
#include "input-file.h"
+#include "sb.h"
+#include "listing.h"
/*
* O/S independent module to supply buffers of sanitised source code
- * to rest of assembler. We get sanitized input data of arbitrary length.
+ * to rest of assembler. We get sanitised input data of arbitrary length.
* We break these buffers on line boundaries, recombine pieces that
* were broken across buffers, and return a buffer of full lines to
* the caller.
* The last partial line begins the next buffer we build and return to caller.
- * The buffer returned to caller is preceeded by BEFORE_STRING and followed
+ * The buffer returned to caller is preceded by BEFORE_STRING and followed
* by AFTER_STRING, as sentinels. The last character before AFTER_STRING
* is a newline.
* Also looks after line numbers, for e.g. error messages.
*/
\f
#define BEFORE_STRING ("\n")
-#define AFTER_STRING ("\0") /* bcopy of 0 chars might choke. */
+#define AFTER_STRING ("\0") /* memcpy of 0 chars might choke. */
#define BEFORE_SIZE (1)
#define AFTER_SIZE (1)
-static char * buffer_start; /*->1st char of full buffer area. */
-static char * partial_where; /*->after last full line in buffer. */
-static int partial_size; /* >=0. Number of chars in partial line in buffer. */
-static char save_source [AFTER_SIZE];
-/* Because we need AFTER_STRING just after last */
-/* full line, it clobbers 1st part of partial */
-/* line. So we preserve 1st part of partial */
-/* line here. */
-static int buffer_length; /* What is the largest size buffer that */
-/* input_file_give_next_buffer() could */
-/* return to us? */
+#ifndef TC_EOL_IN_INSN
+#define TC_EOL_IN_INSN(P) 0
+#endif
-/* Saved information about the file that .include'd this one. When we hit EOF,
- we automatically pop to that file. */
+static char *buffer_start; /*->1st char of full buffer area. */
+static char *partial_where; /*->after last full line in buffer. */
+static int partial_size; /* >=0. Number of chars in partial line in buffer. */
+
+/* Because we need AFTER_STRING just after last full line, it clobbers
+ 1st part of partial line. So we preserve 1st part of partial line
+ here. */
+static char save_source[AFTER_SIZE];
+
+/* What is the largest size buffer that input_file_give_next_buffer()
+ could return to us? */
+static unsigned int buffer_length;
+
+/* The index into an sb structure we are reading from. -1 if none. */
+static int sb_index = -1;
+
+/* If we are reading from an sb structure, this is it. */
+static sb from_sb;
+
+/* Should we do a conditional check on from_sb? */
+static int from_sb_is_expansion = 1;
-static char *next_saved_file;
+/* The number of nested sb structures we have included. */
+int macro_nest;
/* We can have more than one source file open at once, though the info for all
but the latest one are saved off in a struct input_save. These files remain
open, so we are limited by the number of open files allowed by the
underlying OS. We may also sequentially read more than one source file in an
- assembly. */
+ assembly. */
/* We must track the physical file and line number for error messages. We also
track a "logical" file and line number corresponding to (C?) compiler
source line numbers. Whenever we open a file we must fill in
- physical_input_file. So if it is NULL we have not opened any files yet. */
+ physical_input_file. So if it is NULL we have not opened any files yet. */
-char *physical_input_file;
-char *logical_input_file;
+static char *physical_input_file;
+static char *logical_input_file;
-typedef unsigned int line_numberT; /* 1-origin line number in a source file. */
-/* A line ends in '\n' or eof. */
+typedef unsigned int line_numberT; /* 1-origin line number in a source file. */
+/* A line ends in '\n' or eof. */
-line_numberT physical_input_line;
-line_numberT logical_input_line;
+static line_numberT physical_input_line;
+static int logical_input_line;
/* Struct used to save the state of the input handler during include files */
struct input_save {
- char *buffer_start;
- char *partial_where;
- int partial_size;
- char save_source [AFTER_SIZE];
- int buffer_length;
- char *physical_input_file;
- char *logical_input_file;
- line_numberT physical_input_line;
- line_numberT logical_input_line;
- char *next_saved_file; /* Chain of input_saves */
- char *input_file_save; /* Saved state of input routines */
- char *saved_position; /* Caller's saved position in buf */
+ char * buffer_start;
+ char * partial_where;
+ int partial_size;
+ char save_source[AFTER_SIZE];
+ unsigned int buffer_length;
+ char * physical_input_file;
+ char * logical_input_file;
+ line_numberT physical_input_line;
+ int logical_input_line;
+ int sb_index;
+ sb from_sb;
+ int from_sb_is_expansion; /* Should we do a conditional check? */
+ struct input_save * next_saved_file; /* Chain of input_saves. */
+ char * input_file_save; /* Saved state of input routines. */
+ char * saved_position; /* Caller's saved position in buf. */
};
-#ifdef __STDC__
-static void as_1_char(unsigned int c, FILE *stream);
-#else /* __STDC__ */
-static void as_1_char();
-#endif /* __STDC__ */
+static struct input_save *input_scrub_push (char *saved_position);
+static char *input_scrub_pop (struct input_save *arg);
+
+/* Saved information about the file that .include'd this one. When we hit EOF,
+ we automatically pop to that file. */
+
+static struct input_save *next_saved_file;
/* Push the state of input reading and scrubbing so that we can #include.
The return value is a 'void *' (fudged for old compilers) to a save
- area, which can be restored by passing it to input_scrub_pop(). */
-char *input_scrub_push(saved_position)
-char *saved_position;
-{
- register struct input_save *saved;
-
- saved = (struct input_save *) xmalloc(sizeof *saved);
-
- saved->saved_position = saved_position;
- saved->buffer_start = buffer_start;
- saved->partial_where = partial_where;
- saved->partial_size = partial_size;
- saved->buffer_length = buffer_length;
- saved->physical_input_file = physical_input_file;
- saved->logical_input_file = logical_input_file;
- saved->physical_input_line = physical_input_line;
- saved->logical_input_line = logical_input_line;
- bcopy(saved->save_source, save_source, sizeof(save_source));
- saved->next_saved_file = next_saved_file;
- saved->input_file_save = input_file_push();
-
- input_scrub_begin(); /* Reinitialize! */
-
- return((char *) saved);
-} /* input_scrub_push() */
+ area, which can be restored by passing it to input_scrub_pop(). */
-char *
- input_scrub_pop (arg)
-char *arg;
+static struct input_save *
+input_scrub_push (char *saved_position)
{
- register struct input_save *saved;
- char *saved_position;
-
- input_scrub_end (); /* Finish off old buffer */
-
- saved = (struct input_save *)arg;
-
- input_file_pop (saved->input_file_save);
- saved_position = saved->saved_position;
- buffer_start = saved->buffer_start;
- buffer_length = saved->buffer_length;
- physical_input_file = saved->physical_input_file;
- logical_input_file = saved->logical_input_file;
- physical_input_line = saved->physical_input_line;
- logical_input_line = saved->logical_input_line;
- partial_where = saved->partial_where;
- partial_size = saved->partial_size;
- next_saved_file = saved->next_saved_file;
- bcopy (save_source, saved->save_source, sizeof (save_source));
-
- free(arg);
- return saved_position;
+ register struct input_save *saved;
+
+ saved = (struct input_save *) xmalloc (sizeof *saved);
+
+ saved->saved_position = saved_position;
+ saved->buffer_start = buffer_start;
+ saved->partial_where = partial_where;
+ saved->partial_size = partial_size;
+ saved->buffer_length = buffer_length;
+ saved->physical_input_file = physical_input_file;
+ saved->logical_input_file = logical_input_file;
+ saved->physical_input_line = physical_input_line;
+ saved->logical_input_line = logical_input_line;
+ saved->sb_index = sb_index;
+ saved->from_sb = from_sb;
+ saved->from_sb_is_expansion = from_sb_is_expansion;
+ memcpy (saved->save_source, save_source, sizeof (save_source));
+ saved->next_saved_file = next_saved_file;
+ saved->input_file_save = input_file_push ();
+
+ input_file_begin (); /* Reinitialize! */
+ logical_input_line = -1;
+ logical_input_file = (char *) NULL;
+ buffer_length = input_file_buffer_size ();
+ sb_index = -1;
+
+ buffer_start = (char *) xmalloc ((BEFORE_SIZE + buffer_length
+ + buffer_length + AFTER_SIZE));
+ memcpy (buffer_start, BEFORE_STRING, (int) BEFORE_SIZE);
+
+ return saved;
}
+static char *
+input_scrub_pop (struct input_save *saved)
+{
+ char *saved_position;
+
+ input_scrub_end (); /* Finish off old buffer */
+
+ input_file_pop (saved->input_file_save);
+ saved_position = saved->saved_position;
+ buffer_start = saved->buffer_start;
+ buffer_length = saved->buffer_length;
+ physical_input_file = saved->physical_input_file;
+ logical_input_file = saved->logical_input_file;
+ physical_input_line = saved->physical_input_line;
+ logical_input_line = saved->logical_input_line;
+ sb_index = saved->sb_index;
+ from_sb = saved->from_sb;
+ from_sb_is_expansion = saved->from_sb_is_expansion;
+ partial_where = saved->partial_where;
+ partial_size = saved->partial_size;
+ next_saved_file = saved->next_saved_file;
+ memcpy (save_source, saved->save_source, sizeof (save_source));
+
+ free (saved);
+ return saved_position;
+}
\f
void
- input_scrub_begin ()
+input_scrub_begin (void)
{
- know(strlen(BEFORE_STRING) == BEFORE_SIZE);
- know(strlen(AFTER_STRING) == AFTER_SIZE || (AFTER_STRING[0] == '\0' && AFTER_SIZE == 1));
-
- input_file_begin ();
-
- buffer_length = input_file_buffer_size ();
-
- buffer_start = xmalloc((long)(BEFORE_SIZE + buffer_length + buffer_length + AFTER_SIZE));
- bcopy (BEFORE_STRING, buffer_start, (int)BEFORE_SIZE);
-
- /* Line number things. */
- logical_input_line = 0;
- logical_input_file = (char *)NULL;
- physical_input_file = NULL; /* No file read yet. */
- next_saved_file = NULL; /* At EOF, don't pop to any other file */
- do_scrub_begin();
+ know (strlen (BEFORE_STRING) == BEFORE_SIZE);
+ know (strlen (AFTER_STRING) == AFTER_SIZE
+ || (AFTER_STRING[0] == '\0' && AFTER_SIZE == 1));
+
+ input_file_begin ();
+
+ buffer_length = input_file_buffer_size ();
+
+ buffer_start = (char *) xmalloc ((BEFORE_SIZE + buffer_length
+ + buffer_length + AFTER_SIZE));
+ memcpy (buffer_start, BEFORE_STRING, (int) BEFORE_SIZE);
+
+ /* Line number things. */
+ logical_input_line = -1;
+ logical_input_file = (char *) NULL;
+ physical_input_file = NULL; /* No file read yet. */
+ next_saved_file = NULL; /* At EOF, don't pop to any other file */
+ do_scrub_begin (flag_m68k_mri);
}
void
- input_scrub_end ()
+input_scrub_end (void)
{
- if (buffer_start)
- {
- free (buffer_start);
- buffer_start = 0;
- input_file_end ();
- }
+ if (buffer_start)
+ {
+ free (buffer_start);
+ buffer_start = 0;
+ input_file_end ();
+ }
}
-/* Start reading input from a new file. */
+/* Start reading input from a new file.
+ Return start of caller's part of buffer. */
-char * /* Return start of caller's part of buffer. */
- input_scrub_new_file (filename)
-char * filename;
+char *
+input_scrub_new_file (char *filename)
{
- input_file_open (filename, !flagseen['f']);
- physical_input_file = filename[0] ? filename : "{standard input}";
- physical_input_line = 0;
-
- partial_size = 0;
- return (buffer_start + BEFORE_SIZE);
-}
+ input_file_open (filename, !flag_no_comments);
+ physical_input_file = filename[0] ? filename : _("{standard input}");
+ physical_input_line = 0;
+ partial_size = 0;
+ return (buffer_start + BEFORE_SIZE);
+}
/* Include a file from the current file. Save our state, cause it to
be restored on EOF, and begin handling a new file. Same result as
- input_scrub_new_file. */
+ input_scrub_new_file. */
char *
- input_scrub_include_file (filename, position)
-char *filename;
-char *position;
+input_scrub_include_file (char *filename, char *position)
{
- next_saved_file = input_scrub_push(position);
- return input_scrub_new_file (filename);
+ next_saved_file = input_scrub_push (position);
+ return input_scrub_new_file (filename);
+}
+
+/* Start getting input from an sb structure. This is used when
+ expanding a macro. */
+
+void
+input_scrub_include_sb (sb *from, char *position, int is_expansion)
+{
+ if (macro_nest > max_macro_nest)
+ as_fatal (_("macros nested too deeply"));
+ ++macro_nest;
+
+#ifdef md_macro_start
+ if (is_expansion)
+ {
+ md_macro_start ();
+ }
+#endif
+
+ next_saved_file = input_scrub_push (position);
+
+ sb_new (&from_sb);
+ from_sb_is_expansion = is_expansion;
+ if (from->len >= 1 && from->ptr[0] != '\n')
+ {
+ /* Add the sentinel required by read.c. */
+ sb_add_char (&from_sb, '\n');
+ }
+ sb_scrub_and_add_sb (&from_sb, from);
+
+ /* Make sure the parser looks at defined contents when it scans for
+ e.g. end-of-line at the end of a macro. */
+ sb_add_char (&from_sb, 0);
+ from_sb.len--;
+
+ sb_index = 1;
+
+ /* These variables are reset by input_scrub_push. Restore them
+ since we are, after all, still at the same point in the file. */
+ logical_input_line = next_saved_file->logical_input_line;
+ logical_input_file = next_saved_file->logical_input_file;
}
void
- input_scrub_close ()
+input_scrub_close (void)
{
- input_file_close ();
+ input_file_close ();
}
+
char *
- input_scrub_next_buffer (bufp)
-char **bufp;
+input_scrub_next_buffer (char **bufp)
{
- register char * limit; /*->just after last char of buffer. */
-
- *bufp = buffer_start + BEFORE_SIZE;
-
-#ifdef DONTDEF
- if(preprocess) {
- if(save_buffer) {
- *bufp = save_buffer;
- save_buffer = 0;
- }
- limit = input_file_give_next_buffer(buffer_start+BEFORE_SIZE);
- if (!limit) {
- partial_where = 0;
- if(partial_size)
- as_warn("Partial line at end of file ignored");
- return partial_where;
- }
-
- if(partial_size)
- bcopy(save_source, partial_where,(int)AFTER_SIZE);
- do_scrub(partial_where,partial_size,buffer_start+BEFORE_SIZE,limit-(buffer_start+BEFORE_SIZE),&out_string,&out_length);
- limit=out_string + out_length;
- for(p=limit;*--p!='\n';)
- ;
- p++;
- if(p<=buffer_start+BEFORE_SIZE)
- as_fatal("Source line too long. Please change file '%s' and re-make the assembler.", __FILE__);
-
- partial_where = p;
- partial_size = limit-p;
- bcopy(partial_where, save_source,(int)AFTER_SIZE);
- bcopy(AFTER_STRING, partial_where, (int)AFTER_SIZE);
-
- save_buffer = *bufp;
- *bufp = out_string;
-
- return partial_where;
- }
-
- /* We're not preprocessing. Do the right thing */
-#endif
- if (partial_size)
+ register char *limit; /*->just after last char of buffer. */
+
+ if (sb_index >= 0)
+ {
+ if (sb_index >= from_sb.len)
+ {
+ sb_kill (&from_sb);
+ if (from_sb_is_expansion
+ )
{
- bcopy (partial_where, buffer_start + BEFORE_SIZE, (int)partial_size);
- bcopy (save_source, buffer_start + BEFORE_SIZE, (int)AFTER_SIZE);
- }
- limit = input_file_give_next_buffer (buffer_start + BEFORE_SIZE + partial_size);
- if (limit)
- {
- register char * p; /* Find last newline. */
-
- for (p = limit; * -- p != '\n';)
- {
- }
- ++ p;
- if (p <= buffer_start + BEFORE_SIZE)
- {
- as_fatal("Source line too long. Please change file %s then rebuild assembler.", __FILE__);
- }
- partial_where = p;
- partial_size = limit - p;
- bcopy (partial_where, save_source, (int)AFTER_SIZE);
- bcopy (AFTER_STRING, partial_where, (int)AFTER_SIZE);
+ cond_finish_check (macro_nest);
+#ifdef md_macro_end
+ /* Allow the target to clean up per-macro expansion
+ data. */
+ md_macro_end ();
+#endif
}
- else
+ --macro_nest;
+ partial_where = NULL;
+ if (next_saved_file != NULL)
+ *bufp = input_scrub_pop (next_saved_file);
+ return partial_where;
+ }
+
+ partial_where = from_sb.ptr + from_sb.len;
+ partial_size = 0;
+ *bufp = from_sb.ptr + sb_index;
+ sb_index = from_sb.len;
+ return partial_where;
+ }
+
+ *bufp = buffer_start + BEFORE_SIZE;
+
+ if (partial_size)
+ {
+ memcpy (buffer_start + BEFORE_SIZE, partial_where,
+ (unsigned int) partial_size);
+ memcpy (buffer_start + BEFORE_SIZE, save_source, AFTER_SIZE);
+ }
+ limit = input_file_give_next_buffer (buffer_start
+ + BEFORE_SIZE
+ + partial_size);
+ if (limit)
+ {
+ register char *p; /* Find last newline. */
+ /* Terminate the buffer to avoid confusing TC_EOL_IN_INSN. */
+ *limit = '\0';
+ for (p = limit - 1; *p != '\n' || TC_EOL_IN_INSN (p); --p)
+ ;
+ ++p;
+
+ while (p <= buffer_start + BEFORE_SIZE)
+ {
+ int limoff;
+
+ limoff = limit - buffer_start;
+ buffer_length += input_file_buffer_size ();
+ buffer_start = (char *) xrealloc (buffer_start,
+ (BEFORE_SIZE
+ + 2 * buffer_length
+ + AFTER_SIZE));
+ *bufp = buffer_start + BEFORE_SIZE;
+ limit = input_file_give_next_buffer (buffer_start + limoff);
+
+ if (limit == NULL)
{
- partial_where = 0;
- if (partial_size > 0)
- {
- as_warn("Partial line at end of file ignored");
- }
- /* If we should pop to another file at EOF, do it. */
- if (next_saved_file)
- {
- *bufp = input_scrub_pop (next_saved_file); /* Pop state */
- /* partial_where is now correct to return, since we popped it. */
- }
+ as_warn (_("partial line at end of file ignored"));
+ partial_where = NULL;
+ if (next_saved_file)
+ *bufp = input_scrub_pop (next_saved_file);
+ return NULL;
}
- return (partial_where);
+
+ /* Terminate the buffer to avoid confusing TC_EOL_IN_INSN. */
+ *limit = '\0';
+ for (p = limit - 1; *p != '\n' || TC_EOL_IN_INSN (p); --p)
+ ;
+ ++p;
+ }
+
+ partial_where = p;
+ partial_size = limit - p;
+ memcpy (save_source, partial_where, (int) AFTER_SIZE);
+ memcpy (partial_where, AFTER_STRING, (int) AFTER_SIZE);
+ }
+ else
+ {
+ partial_where = 0;
+ if (partial_size > 0)
+ {
+ as_warn (_("partial line at end of file ignored"));
+ }
+
+ /* Tell the listing we've finished the file. */
+ LISTING_EOF ();
+
+ /* If we should pop to another file at EOF, do it. */
+ if (next_saved_file)
+ {
+ *bufp = input_scrub_pop (next_saved_file); /* Pop state */
+ /* partial_where is now correct to return, since we popped it. */
+ }
+ }
+ return (partial_where);
}
\f
-/*
- * The remaining part of this file deals with line numbers, error
- * messages and so on.
- */
-
+/* The remaining part of this file deals with line numbers, error
+ messages and so on. Return TRUE if we opened any file. */
int
- seen_at_least_1_file () /* TRUE if we opened any file. */
+seen_at_least_1_file (void)
{
- return (physical_input_file != NULL);
+ return (physical_input_file != NULL);
}
void
- bump_line_counters ()
+bump_line_counters (void)
{
- ++ physical_input_line;
- /* ++ logical_input_line; FIXME-now remove this. */
+ if (sb_index < 0)
+ {
+ ++physical_input_line;
+ if (logical_input_line >= 0)
+ ++logical_input_line;
+ }
}
\f
-/*
- * new_logical_line()
- *
- * Tells us what the new logical line number and file are.
- * If the line_number is <0, we don't change the current logical line number.
- * If the fname is NULL, we don't change the current logical file name.
- */
-void new_logical_line(fname, line_number)
-char *fname; /* DON'T destroy it! We point to it! */
-int line_number;
-{
- if (fname) {
- logical_input_file = fname;
- } /* if we have a file name */
-
- if (line_number >= 0) {
- logical_input_line = line_number;
- } /* if we have a line number */
-} /* new_logical_line() */
-\f
-/*
- * a s _ w h e r e ()
- *
- * Write a line to stderr locating where we are in reading
- * input source files.
- * As a sop to the debugger of AS, pretty-print the offending line.
- */
-void as_where() {
- char *p;
- line_numberT line;
-
- if (logical_input_file && (logical_input_line > 0)) {
- p = logical_input_file;
- line = logical_input_line;
- } else {
- p = physical_input_file;
- line = physical_input_line;
- } /* line number should match file name */
-
- fprintf(stderr, "%s:%u: ", p, line);
-
-#ifdef DONTDEF
- if (physical_input_file) {
- if (input_file_is_open()) { /* we can still read lines from source */
- fprintf (stderr," @ physical line %ld., file \"%s\"",
- (long) physical_input_line, physical_input_file);
- fprintf (stderr," @ logical line %ld., file \"%s\"\n",
- (long) logical_input_line, logical_input_file);
- (void)putc(' ', stderr);
- as_howmuch (stderr);
- (void)putc('\n', stderr);
- } else {
- fprintf(stderr, " After reading source.\n");
- } /* input file is still open */
- } else {
- fprintf(stderr, " Before reading source.\n");
- } /* we tried to read SOME source */
-#endif /* DONTDEF */
-
- return;
-} /* as_where() */
-
-
+/* Tells us what the new logical line number and file are.
+ If the line_number is -1, we don't change the current logical line
+ number. If it is -2, we decrement the logical line number (this is
+ to support the .appfile pseudo-op inserted into the stream by
+ do_scrub_chars).
+ If the fname is NULL, we don't change the current logical file name.
+ Returns nonzero if the filename actually changes. */
-\f
-/*
- * a s _ h o w m u c h ()
- *
- * Output to given stream how much of line we have scanned so far.
- * Assumes we have scanned up to and including input_line_pointer.
- * No free '\n' at end of line.
- */
-void
- as_howmuch (stream)
-FILE * stream; /* Opened for write please. */
+int
+new_logical_line_flags (char *fname, /* DON'T destroy it! We point to it! */
+ int line_number,
+ int flags)
{
- register char * p; /* Scan input line. */
- /* register char c; JF unused */
-
- for (p = input_line_pointer - 1; * p != '\n'; --p)
- {
- }
- ++ p; /* p->1st char of line. */
- for (; p <= input_line_pointer; p++)
- {
- /* Assume ASCII. EBCDIC & other micro-computer char sets ignored. */
- /* c = *p & 0xFF; JF unused */
- as_1_char(*p, stream);
- }
+ switch (flags)
+ {
+ case 0:
+ break;
+ case 1:
+ if (line_number != -1)
+ abort ();
+ break;
+ case 1 << 1:
+ case 1 << 2:
+ /* FIXME: we could check that include nesting is correct. */
+ break;
+ default:
+ abort ();
+ }
+
+ if (line_number >= 0)
+ logical_input_line = line_number;
+ else if (line_number == -1 && fname && !*fname && (flags & (1 << 2)))
+ {
+ logical_input_file = physical_input_file;
+ logical_input_line = physical_input_line;
+ fname = NULL;
+ }
+
+ if (fname
+ && (logical_input_file == NULL
+ || strcmp (logical_input_file, fname)))
+ {
+ logical_input_file = fname;
+ return 1;
+ }
+ else
+ return 0;
}
-static void as_1_char (c,stream)
-unsigned int c;
-FILE *stream;
+int
+new_logical_line (char *fname, int line_number)
{
- if (c > 127)
- {
- (void)putc('%', stream);
- c -= 128;
- }
- if (c < 32)
- {
- (void)putc('^', stream);
- c += '@';
- }
- (void)putc(c, stream);
+ return new_logical_line_flags (fname, line_number, 0);
}
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
+\f
+/* Return the current file name and line number.
+ namep should be char * const *, but there are compilers which screw
+ up declarations like that, and it's easier to avoid it. */
-/* end of input_scrub.c */
+void
+as_where (char **namep, unsigned int *linep)
+{
+ if (logical_input_file != NULL
+ && (linep == NULL || logical_input_line >= 0))
+ {
+ *namep = logical_input_file;
+ if (linep != NULL)
+ *linep = logical_input_line;
+ }
+ else if (physical_input_file != NULL)
+ {
+ *namep = physical_input_file;
+ if (linep != NULL)
+ *linep = physical_input_line;
+ }
+ else
+ {
+ *namep = 0;
+ if (linep != NULL)
+ *linep = 0;
+ }
+}