/* itbl-ops.c
- Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
+ Copyright 1997, 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007,
+ 2009 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
/*======================================================================*/
/*
*
*/
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
+#include "as.h"
#include "itbl-ops.h"
-#include "itbl-parse.h"
+#include <itbl-parse.h>
/* #define DEBUG */
/*======================================================================*/
/* structures for keeping itbl format entries */
-struct itbl_range
- {
- int sbit; /* mask starting bit position */
- int ebit; /* mask ending bit position */
- };
+struct itbl_range {
+ int sbit; /* mask starting bit position */
+ int ebit; /* mask ending bit position */
+};
-struct itbl_field
- {
- e_type type; /* dreg/creg/greg/immed/symb */
- struct itbl_range range; /* field's bitfield range within instruction */
- unsigned long flags; /* field flags */
- struct itbl_field *next; /* next field in list */
- };
+struct itbl_field {
+ e_type type; /* dreg/creg/greg/immed/symb */
+ struct itbl_range range; /* field's bitfield range within instruction */
+ unsigned long flags; /* field flags */
+ struct itbl_field *next; /* next field in list */
+};
/* These structures define the instructions and registers for a processor.
* If the type is an instruction, the structure defines the format of an
* instruction where the fields are the list of operands.
* The flags field below uses the same values as those defined in the
* gnu assembler and are machine specific. */
-struct itbl_entry
- {
- e_processor processor; /* processor number */
- e_type type; /* dreg/creg/greg/insn */
- char *name; /* mnemionic name for insn/register */
- unsigned long value; /* opcode/instruction mask/register number */
- unsigned long flags; /* effects of the instruction */
- struct itbl_range range; /* bit range within instruction for value */
- struct itbl_field *fields; /* list of operand definitions (if any) */
- struct itbl_entry *next; /* next entry */
- };
+struct itbl_entry {
+ e_processor processor; /* processor number */
+ e_type type; /* dreg/creg/greg/insn */
+ char *name; /* mnemionic name for insn/register */
+ unsigned long value; /* opcode/instruction mask/register number */
+ unsigned long flags; /* effects of the instruction */
+ struct itbl_range range; /* bit range within instruction for value */
+ struct itbl_field *fields; /* list of operand definitions (if any) */
+ struct itbl_entry *next; /* next entry */
+};
/* local data and structures */
static int itbl_num_opcodes = 0;
/* Array of entries for each processor and entry type */
-static struct itbl_entry *entries[e_nprocs][e_ntypes] =
-{
- {0, 0, 0, 0, 0, 0},
- {0, 0, 0, 0, 0, 0},
- {0, 0, 0, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}
-};
+static struct itbl_entry *entries[e_nprocs][e_ntypes];
/* local prototypes */
-static unsigned long build_opcode PARAMS ((struct itbl_entry *e));
-static e_type get_type PARAMS ((int yytype));
-static e_processor get_processor PARAMS ((int yyproc));
-static struct itbl_entry **get_entries PARAMS ((e_processor processor,
- e_type type));
-static struct itbl_entry *find_entry_byname PARAMS ((e_processor processor,
- e_type type, char *name));
-static struct itbl_entry *find_entry_byval PARAMS ((e_processor processor,
- e_type type, unsigned long val, struct itbl_range *r));
-static struct itbl_entry *alloc_entry PARAMS ((e_processor processor,
- e_type type, char *name, unsigned long value));
-static unsigned long apply_range PARAMS ((unsigned long value,
- struct itbl_range r));
-static unsigned long extract_range PARAMS ((unsigned long value,
- struct itbl_range r));
-static struct itbl_field *alloc_field PARAMS ((e_type type, int sbit,
- int ebit, unsigned long flags));
+static unsigned long build_opcode (struct itbl_entry *e);
+static e_type get_type (int yytype);
+static e_processor get_processor (int yyproc);
+static struct itbl_entry **get_entries (e_processor processor,
+ e_type type);
+static struct itbl_entry *find_entry_byname (e_processor processor,
+ e_type type, char *name);
+static struct itbl_entry *find_entry_byval (e_processor processor,
+ e_type type, unsigned long val, struct itbl_range *r);
+static struct itbl_entry *alloc_entry (e_processor processor,
+ e_type type, char *name, unsigned long value);
+static unsigned long apply_range (unsigned long value, struct itbl_range r);
+static unsigned long extract_range (unsigned long value, struct itbl_range r);
+static struct itbl_field *alloc_field (e_type type, int sbit,
+ int ebit, unsigned long flags);
/*======================================================================*/
/* Interfaces to the parser */
{
extern FILE *yyin;
extern int yyparse (void);
- yyin = fopen (insntbl, "r");
+
+ yyin = fopen (insntbl, FOPEN_RT);
if (yyin == 0)
{
printf ("Can't open processor instruction specification file \"%s\"\n",
insntbl);
return 1;
}
- else
- {
- while (yyparse ());
- }
+
+ while (yyparse ())
+ ;
+
fclose (yyin);
itbl_have_entries = 1;
return 0;
itbl_add_reg (int yyprocessor, int yytype, char *regname,
int regnum)
{
-#if 0
-#include "as.h"
-#include "symbols.h"
- /* Since register names don't have a prefix, we put them in the symbol table so
- they can't be used as symbols. This also simplifies argument parsing as
- we can let gas parse registers for us. The recorded register number is
- regnum. */
- /* Use symbol_create here instead of symbol_new so we don't try to
- output registers into the object file's symbol table. */
- symbol_table_insert (symbol_create (regname, reg_section,
- regnum, &zero_address_frag));
-#endif
return alloc_entry (get_processor (yyprocessor), get_type (yytype), regname,
(unsigned long) regnum);
}
/* Interfaces for assembler and disassembler */
#ifndef STAND_ALONE
-#include "as.h"
-#include "symbols.h"
static void append_insns_as_macros (void);
-/* initialize for gas */
+/* Initialize for gas. */
+
void
itbl_init (void)
{
e_type type;
if (!itbl_have_entries)
- return;
+ return;
/* Since register names don't have a prefix, put them in the symbol table so
they can't be used as symbols. This simplifies argument parsing as
for (e = *es; e; e = e->next)
{
symbol_table_insert (symbol_create (e->name, reg_section,
- e->value, &zero_address_frag));
+ e->value, &zero_address_frag));
}
}
append_insns_as_macros ();
int n, id, size, new_size, new_num_opcodes;
if (!itbl_have_entries)
- return;
+ return;
if (!itbl_num_opcodes) /* no new instructions to add! */
{
printf (_("Unable to allocate memory for new instructions\n"));
return;
}
- if (size) /* copy prexisting opcodes table */
+ if (size) /* copy preexisting opcodes table */
memcpy (new_opcodes, ITBL_OPCODES, size);
/* FIXME! some NUMOPCODES are calculated expressions.
o->name = e->name;
o->args = strdup (form_args (e));
o->mask = apply_range (e->value, e->range);
- /* FIXME how to catch durring assembly? */
+ /* FIXME how to catch during assembly? */
/* mask to identify this insn */
o->match = apply_range (e->value, e->range);
o->pinfo = 0;
#ifdef USE_MACROS
- o->mask = id++; /* FIXME how to catch durring assembly? */
+ o->mask = id++; /* FIXME how to catch during assembly? */
o->match = 0; /* for macros, the insn_isa number */
o->pinfo = INSN_MACRO;
#endif
itbl_assemble (char *name, char *s)
{
unsigned long opcode;
- struct itbl_entry *e;
+ struct itbl_entry *e = NULL;
struct itbl_field *f;
char *n;
int processor;
if (!name || !*name)
- return 0; /* error! must have a opcode name/expr */
+ return 0; /* error! must have an opcode name/expr */
/* find entry in list of instructions for all processors */
for (processor = 0; processor < e_nprocs; processor++)
break;
}
if (!e)
- return 0; /* opcode not in table; invalid instrustion */
+ return 0; /* opcode not in table; invalid instruction */
opcode = build_opcode (e);
/* parse opcode's args (if any) */
struct itbl_field *f;
if (!ITBL_IS_INSN (insn))
- return 0; /* error*/
+ return 0; /* error */
processor = get_processor (ITBL_DECODE_PNUM (insn));
/* find entry in list */
e = find_entry_byval (processor, e_insn, insn, 0);
if (!e)
- return 0; /* opcode not in table; invalid instrustion */
+ return 0; /* opcode not in table; invalid instruction */
strcpy (s, e->name);
- /* parse insn's args (if any) */
+ /* Parse insn's args (if any). */
for (f = e->fields; f; f = f->next) /* for each arg, ... */
{
struct itbl_entry *r;
unsigned long value;
+ char s_value[20];
- if (f == e->fields) /* first operand is preceeded by tab */
+ if (f == e->fields) /* First operand is preceded by tab. */
strcat (s, "\t");
- else /* ','s separate following operands */
+ else /* ','s separate following operands. */
strcat (s, ",");
value = extract_range (insn, f->range);
/* n should be in form $n or 0xhhh (are symbol names valid?? */
case e_creg:
case e_greg:
/* Accept either a string name
- * or '$' followed by the register number */
+ or '$' followed by the register number. */
r = find_entry_byval (e->processor, f->type, value, &f->range);
if (r)
strcat (s, r->name);
else
- sprintf (s, "%s$%lu", s, value);
+ {
+ sprintf (s_value, "$%lu", value);
+ strcat (s, s_value);
+ }
break;
case e_addr:
- /* use assembler's symbol table to find symbol */
- /* FIXME!! Do we need this?
- * if so, what about relocs??
- */
- /* If not a symbol, fall thru to IMMED */
+ /* Use assembler's symbol table to find symbol. */
+ /* FIXME!! Do we need this? If so, what about relocs?? */
+ /* If not a symbol, fall through to IMMED. */
case e_immed:
- sprintf (s, "%s0x%lx", s, value);
+ sprintf (s_value, "0x%lx", value);
+ strcat (s, s_value);
break;
default:
return 0; /* error; invalid field spec */
}
}
- return 1; /* done! */
+ return 1; /* Done! */
}
/*======================================================================*/