#endif
#ifndef LEX_AT
-/* The m88k unfortunately uses @ as a label beginner. */
#define LEX_AT 0
#endif
#endif
#ifndef LEX_DOLLAR
-/* The a29k assembler does not permits labels to start with $. */
#define LEX_DOLLAR 3
#endif
}
\f
#ifndef TC_ADDRESS_BYTES
-#ifdef BFD_ASSEMBLER
#define TC_ADDRESS_BYTES address_bytes
static inline int
return n;
}
#endif
-#endif
/* Set up pseudo-op tables. */
/* endef */
{"equ", s_set, 0},
{"equiv", s_set, 1},
+ {"eqv", s_set, -1},
{"err", s_err, 0},
{"error", s_errwarn, 1},
{"exitm", s_mexit, 0},
{"xref", s_ignore, 0},
{"xstabs", s_xstab, 's'},
{"warning", s_errwarn, 0},
+ {"weakref", s_weakref, 0},
{"word", cons, 2},
{"zero", s_space, 0},
{NULL, NULL, 0} /* End sentinel. */
static offsetT
get_absolute_expr (expressionS *exp)
{
- expression (exp);
+ expression_and_evaluate (exp);
if (exp->X_op != O_constant)
{
if (exp->X_op != O_absent)
/* Input_line_pointer->after ':'. */
SKIP_WHITESPACE ();
}
+ else if (input_line_pointer[1] == '='
+ && (c == '='
+ || ((c == ' ' || c == '\t')
+ && input_line_pointer[2] == '=')))
+ {
+ equals (s, -1);
+ demand_empty_rest_of_line ();
+ }
else if ((c == '='
|| ((c == ' ' || c == '\t')
&& input_line_pointer[1] == '='))
#endif
if (NO_PSEUDO_DOT || flag_m68k_mri)
{
- /* The MRI assembler and the m88k use pseudo-ops
- without a period. */
+ /* The MRI assembler uses pseudo-ops without
+ a period. */
pop = (pseudo_typeS *) hash_find (po_hash, s);
if (pop != NULL && pop->poc_handler == NULL)
pop = NULL;
fill pattern. BYTES_P is non-zero if the alignment value should be
interpreted as the byte boundary, rather than the power of 2. */
-#ifdef BFD_ASSEMBLER
#define ALIGN_LIMIT (stdoutput->arch_info->bits_per_address - 1)
-#else
-#define ALIGN_LIMIT 15
-#endif
static void
s_align (int arg, int bytes_p)
temp = get_absolute_expr (&exp);
size = temp;
-#ifdef BFD_ASSEMBLER
size &= ((offsetT) 2 << (stdoutput->arch_info->bits_per_address - 1)) - 1;
-#endif
if (exp.X_op == O_absent)
{
as_bad (_("missing size expression"));
*p = 0;
symbolP = symbol_find_or_make (name);
- if (S_IS_DEFINED (symbolP) && !S_IS_COMMON (symbolP))
+ if ((S_IS_DEFINED (symbolP) || symbol_equated_p (symbolP))
+ && !S_IS_COMMON (symbolP))
{
- symbolP = NULL;
- as_bad (_("symbol `%s' is already defined"), name);
- *p = c;
- ignore_rest_of_line ();
- goto out;
+ if (!S_IS_VOLATILE (symbolP))
+ {
+ symbolP = NULL;
+ as_bad (_("symbol `%s' is already defined"), name);
+ *p = c;
+ ignore_rest_of_line ();
+ goto out;
+ }
+ /* This could be avoided when the symbol wasn't used so far, but
+ the comment in struc-symbol.h says this flag isn't reliable. */
+ if (1 || !symbol_used_p (symbolP))
+ symbolP = symbol_clone (symbolP, 1);
+ S_SET_SEGMENT (symbolP, undefined_section);
+ S_SET_VALUE (symbolP, 0);
+ symbol_set_frag (symbolP, &zero_address_frag);
+ S_CLEAR_VOLATILE (symbolP);
}
size = S_GET_VALUE (symbolP);
{
S_SET_VALUE (symbolP, (valueT) size);
S_SET_EXTERNAL (symbolP);
+ S_SET_SEGMENT (symbolP, bfd_com_section_ptr);
#ifdef OBJ_VMS
{
extern int flag_one;
}
S_SET_EXTERNAL (sym);
+ S_SET_SEGMENT (sym, bfd_com_section_ptr);
mri_common_symbol = sym;
#ifdef S_SET_ALIGN
#ifdef obj_handle_link_once
obj_handle_link_once (type);
#else /* ! defined (obj_handle_link_once) */
-#ifdef BFD_ASSEMBLER
{
flagword flags;
as_bad (_("bfd_set_section_flags: %s"),
bfd_errmsg (bfd_get_error ()));
}
-#else /* ! defined (BFD_ASSEMBLER) */
- as_warn (_(".linkonce is not supported for this object file format"));
-#endif /* ! defined (BFD_ASSEMBLER) */
#endif /* ! defined (obj_handle_link_once) */
demand_empty_rest_of_line ();
{
bss_seg = subseg_new (".sbss", 1);
seg_info (bss_seg)->bss = 1;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_section_flags (stdoutput, bss_seg, SEC_ALLOC))
as_warn (_("error setting flags for \".sbss\": %s"),
bfd_errmsg (bfd_get_error ()));
-#endif
}
}
#endif
}
input_line_pointer++;
- expression (&exp);
+ expression_and_evaluate (&exp);
if (exp.X_op != O_constant
&& exp.X_op != O_register)
*p = 0;
symbolP = symbol_find_or_make (name);
- /* FIXME-SOON I pulled a (&& symbolP->sy_other == 0 &&
- symbolP->sy_desc == 0) out of this test because coff doesn't have
- those fields, and I can't see when they'd ever be tripped. I
- don't think I understand why they were here so I may have
- introduced a bug. As recently as 1.37 didn't have this test
- anyway. xoxorich. */
-
- if (S_GET_SEGMENT (symbolP) == undefined_section
- && S_GET_VALUE (symbolP) == 0)
+ if (S_GET_SEGMENT (symbolP) == undefined_section)
{
/* The name might be an undefined .global symbol; be sure to
keep the "external" bit. */
called by the obj-format routine which handles section changing
when in MRI mode. It will create a new section, and return it. It
will set *TYPE to the section type: one of 'C' (code), 'D' (data),
- 'M' (mixed), or 'R' (romable). If BFD_ASSEMBLER is defined, the
- flags will be set in the section. */
+ 'M' (mixed), or 'R' (romable). The flags will be set in the section. */
void
s_mri_sect (char *type ATTRIBUTE_UNUSED)
as_bad (_("unrecognized section type"));
++input_line_pointer;
-#ifdef BFD_ASSEMBLER
{
flagword flags;
bfd_errmsg (bfd_get_error ()));
}
}
-#endif
}
/* Ignore the HP type. */
}
static void
-assign_symbol (char *name, int no_reassign)
+assign_symbol (char *name, int mode)
{
symbolS *symbolP;
#endif
}
- /* Permit register names to be redefined. */
- if (no_reassign
- && S_IS_DEFINED (symbolP)
- && S_GET_SEGMENT (symbolP) != reg_section)
- as_bad (_("symbol `%s' is already defined"), name);
+ if (S_IS_DEFINED (symbolP) || symbol_equated_p (symbolP))
+ {
+ /* Permit register names to be redefined. */
+ if ((mode != 0 || !S_IS_VOLATILE (symbolP))
+ && S_GET_SEGMENT (symbolP) != reg_section)
+ {
+ as_bad (_("symbol `%s' is already defined"), name);
+ symbolP = symbol_clone (symbolP, 0);
+ }
+ /* If the symbol is volatile, copy the symbol and replace the
+ original with the copy, so that previous uses of the symbol will
+ retain the value of the symbol at the point of use. */
+ else if (S_IS_VOLATILE (symbolP)
+ /* This could be avoided when the symbol wasn't used so far, but
+ the comment in struc-symbol.h says this flag isn't reliable. */
+ && (1 || symbol_used_p (symbolP)))
+ symbolP = symbol_clone (symbolP, 1);
+ }
+
+ if (mode == 0)
+ S_SET_VOLATILE (symbolP);
+ else if (mode < 0)
+ S_SET_FORWARD_REF (symbolP);
pseudo_set (symbolP);
}
-/* Handle the .equ, .equiv and .set directives. If EQUIV is 1, then
- this is .equiv, and it is an error if the symbol is already
- defined. */
+/* Handle the .equ, .equiv, .eqv, and .set directives. If EQUIV is 1,
+ then this is .equiv, and it is an error if the symbol is already
+ defined. If EQUIV is -1, the symbol additionally is a forward
+ reference. */
void
s_set (int equiv)
|| val.X_add_number > 0xff
|| (mult != 0 && mult != 1 && val.X_add_number != 0))
{
+ resolve_expression (&exp);
if (exp.X_op != O_constant)
as_bad (_("unsupported variable size or fill value"));
else
}
else
{
+ if (now_seg == absolute_section || mri_common_symbol != NULL)
+ resolve_expression (&exp);
+
if (exp.X_op == O_constant)
{
long repeat;
const_flag &= ~IN_DEFAULT_SECTION;
#endif
}
+
+/* .weakref x, y sets x as an alias to y that, as long as y is not
+ referenced directly, will cause y to become a weak symbol. */
+void
+s_weakref (int ignore ATTRIBUTE_UNUSED)
+{
+ char *name;
+ char delim;
+ char *end_name;
+ symbolS *symbolP;
+ symbolS *symbolP2;
+ expressionS exp;
+
+ name = input_line_pointer;
+ delim = get_symbol_end ();
+ end_name = input_line_pointer;
+
+ if (name == end_name)
+ {
+ as_bad (_("expected symbol name"));
+ *end_name = delim;
+ ignore_rest_of_line ();
+ return;
+ }
+
+ symbolP = symbol_find_or_make (name);
+
+ if (S_IS_DEFINED (symbolP) || symbol_equated_p (symbolP))
+ {
+ if(!S_IS_VOLATILE (symbolP))
+ {
+ as_bad (_("symbol `%s' is already defined"), name);
+ *end_name = delim;
+ ignore_rest_of_line ();
+ return;
+ }
+ /* This could be avoided when the symbol wasn't used so far, but
+ the comment in struc-symbol.h says this flag isn't reliable. */
+ if (1 || !symbol_used_p (symbolP))
+ symbolP = symbol_clone (symbolP, 1);
+ S_CLEAR_VOLATILE (symbolP);
+ }
+
+ *end_name = delim;
+
+ SKIP_WHITESPACE ();
+
+ if (*input_line_pointer != ',')
+ {
+ *end_name = 0;
+ as_bad (_("expected comma after \"%s\""), name);
+ *end_name = delim;
+ ignore_rest_of_line ();
+ return;
+ }
+
+ input_line_pointer++;
+
+ SKIP_WHITESPACE ();
+
+ name = input_line_pointer;
+ delim = get_symbol_end ();
+ end_name = input_line_pointer;
+
+ if (name == end_name)
+ {
+ as_bad (_("expected symbol name"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if ((symbolP2 = symbol_find_noref (name, 1)) == NULL
+ && (symbolP2 = md_undefined_symbol (name)) == NULL)
+ {
+ symbolP2 = symbol_find_or_make (name);
+ S_SET_WEAKREFD (symbolP2);
+ }
+ else
+ {
+ symbolS *symp = symbolP2;
+
+ while (S_IS_WEAKREFR (symp) && symp != symbolP)
+ {
+ expressionS *expP = symbol_get_value_expression (symp);
+
+ assert (expP->X_op == O_symbol
+ && expP->X_add_number == 0);
+ symp = expP->X_add_symbol;
+ }
+ if (symp == symbolP)
+ {
+ char *loop;
+
+ loop = concat (S_GET_NAME (symbolP),
+ " => ", S_GET_NAME (symbolP2), NULL);
+
+ symp = symbolP2;
+ while (symp != symbolP)
+ {
+ char *old_loop = loop;
+ symp = symbol_get_value_expression (symp)->X_add_symbol;
+ loop = concat (loop, " => ", S_GET_NAME (symp), NULL);
+ free (old_loop);
+ }
+
+ as_bad (_("%s: would close weakref loop: %s"),
+ S_GET_NAME (symbolP), loop);
+
+ free (loop);
+
+ *end_name = delim;
+ ignore_rest_of_line ();
+ return;
+ }
+
+ /* Short-circuiting instead of just checking here might speed
+ things up a tiny little bit, but loop error messages would
+ miss intermediate links. */
+ /* symbolP2 = symp; */
+ }
+
+ *end_name = delim;
+
+ memset (&exp, 0, sizeof (exp));
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = symbolP2;
+
+ S_SET_SEGMENT (symbolP, undefined_section);
+ symbol_set_value_expression (symbolP, &exp);
+ symbol_set_frag (symbolP, &zero_address_frag);
+ S_SET_WEAKREFR (symbolP);
+
+ demand_empty_rest_of_line ();
+}
\f
/* Verify that we are at the end of a line. If not, issue an error and
{
expressionS exp;
segT seg;
-#if (defined (OBJ_AOUT) || defined (OBJ_BOUT)) && ! defined (BFD_ASSEMBLER)
- int ext;
-#endif /* OBJ_AOUT or OBJ_BOUT */
know (symbolP); /* NULL pointer is logic error. */
- (void) expression (&exp);
+ if (!S_IS_FORWARD_REF (symbolP))
+ (void) expression (&exp);
+ else
+ (void) deferred_expression (&exp);
if (exp.X_op == O_illegal)
as_bad (_("illegal expression"));
as_bad (_("floating point number invalid"));
}
else if (exp.X_op == O_subtract
+ && !S_IS_FORWARD_REF (symbolP)
&& SEG_NORMAL (S_GET_SEGMENT (exp.X_add_symbol))
&& (symbol_get_frag (exp.X_add_symbol)
== symbol_get_frag (exp.X_op_symbol)))
as_bad ("attempt to set value of section symbol");
return;
}
-#if (defined (OBJ_AOUT) || defined (OBJ_BOUT)) && ! defined (BFD_ASSEMBLER)
- ext = S_IS_EXTERNAL (symbolP);
-#endif /* OBJ_AOUT or OBJ_BOUT */
switch (exp.X_op)
{
*symbol_X_add_number (symbolP) += exp.X_add_number;
break;
}
- else if (seg != undefined_section)
+ else if (!S_IS_FORWARD_REF (symbolP) && seg != undefined_section)
{
symbolS *s = exp.X_add_symbol;
copy_symbol_attributes (symbolP, s);
break;
}
- /* Fall thru */
+ S_SET_SEGMENT (symbolP, undefined_section);
+ symbol_set_value_expression (symbolP, &exp);
+ set_zero_frag (symbolP);
+ break;
default:
- /* The value is some complex expression.
- Set segment and frag back to that of a newly created symbol. */
- S_SET_SEGMENT (symbolP, undefined_section);
+ /* The value is some complex expression. */
+ S_SET_SEGMENT (symbolP, expr_section);
symbol_set_value_expression (symbolP, &exp);
set_zero_frag (symbolP);
break;
}
-
-#if (defined (OBJ_AOUT) || defined (OBJ_BOUT)) && ! defined (BFD_ASSEMBLER)
- if (ext)
- S_SET_EXTERNAL (symbolP);
- else
- S_CLEAR_EXTERNAL (symbolP);
-#endif /* OBJ_AOUT or OBJ_BOUT */
}
\f
/* cons()
{
memset (p, 0, nbytes);
- /* Now we need to generate a fixS to record the symbol value.
- This is easy for BFD. For other targets it can be more
- complex. For very complex cases (currently, the HPPA and
- NS32K), you can define TC_CONS_FIX_NEW to do whatever you
- want. For simpler cases, you can define TC_CONS_RELOC to be
- the name of the reloc code that should be stored in the fixS.
- If neither is defined, the code uses NO_RELOC if it is
- defined, and otherwise uses 0. */
+ /* Now we need to generate a fixS to record the symbol value. */
-#ifdef BFD_ASSEMBLER
#ifdef TC_CONS_FIX_NEW
TC_CONS_FIX_NEW (frag_now, p - frag_now->fr_literal, nbytes, exp);
#else
0, r);
}
#endif
-#else
-#ifdef TC_CONS_FIX_NEW
- TC_CONS_FIX_NEW (frag_now, p - frag_now->fr_literal, nbytes, exp);
-#else
- /* Figure out which reloc number to use. Use TC_CONS_RELOC if
- it is defined, otherwise use NO_RELOC if it is defined,
- otherwise use 0. */
-#ifndef TC_CONS_RELOC
-#ifdef NO_RELOC
-#define TC_CONS_RELOC NO_RELOC
-#else
-#define TC_CONS_RELOC 0
-#endif
-#endif
- fix_new_exp (frag_now, p - frag_now->fr_literal, (int) nbytes, exp, 0,
- TC_CONS_RELOC);
-#endif /* TC_CONS_FIX_NEW */
-#endif /* BFD_ASSEMBLER */
}
}
\f
input_line_pointer++;
if (*input_line_pointer == '=')
input_line_pointer++;
+ if (reassign < 0 && *input_line_pointer == '=')
+ input_line_pointer++;
while (*input_line_pointer == ' ' || *input_line_pointer == '\t')
input_line_pointer++;
if (flag_mri)
stop = mri_comment_field (&stopc);
- assign_symbol (sym_name, !reassign);
+ assign_symbol (sym_name, reassign >= 0 ? !reassign : reassign);
if (flag_mri)
{
asprintf (&label, "%s%s", default_prefix, name);
else
{
- char leading_char = 0;
-#ifdef BFD_ASSEMBLER
- leading_char = bfd_get_symbol_leading_char (stdoutput);
-#endif
+ char leading_char = bfd_get_symbol_leading_char (stdoutput);
/* Missing entry point, use function's name with the leading
char prepended. */
if (leading_char)