/* subsegs.c - subsegments -
- Copyright (C) 1987, 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2002, 2004
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
-/*
- * Segments & sub-segments.
- */
+/* Segments & sub-segments. */
#include "as.h"
frchainS *frchain_root, *frchain_now;
+static struct obstack frchains;
+
#ifndef BFD_ASSEMBLER
#ifdef MANY_SEGMENTS
segment_info_type segment_info[SEG_MAXIMUM_ORDINAL];
#else
-/* Commented in "subsegs.h". */
+/* Commented in "subsegs.h". */
frchainS *data0_frchainP, *bss0_frchainP;
#endif /* MANY_SEGMENTS */
-char *const seg_name[] =
-{
+char const *const seg_name[] = {
"absolute",
#ifdef MANY_SEGMENTS
"e0", "e1", "e2", "e3", "e4", "e5", "e6", "e7", "e8", "e9",
+ "e10", "e11", "e12", "e13", "e14", "e15", "e16", "e17", "e18", "e19",
+ "e20", "e21", "e22", "e23", "e24", "e25", "e26", "e27", "e28", "e29",
+ "e30", "e31", "e32", "e33", "e34", "e35", "e36", "e37", "e38", "e39",
#else
"text",
"data",
"transfert vector postload",
"register",
"",
-}; /* Used by error reporters, dumpers etc. */
+}; /* Used by error reporters, dumpers etc. */
+#else /* BFD_ASSEMBLER */
+
+/* Gas segment information for bfd_abs_section_ptr and
+ bfd_und_section_ptr. */
+static segment_info_type *abs_seg_info;
+static segment_info_type *und_seg_info;
+
#endif /* BFD_ASSEMBLER */
-static void subseg_set_rest PARAMS ((segT, subsegT));
+static void subseg_set_rest (segT, subsegT);
+
+static fragS dummy_frag;
+
+static frchainS absolute_frchain;
\f
void
-subsegs_begin ()
+subsegs_begin (void)
{
/* Check table(s) seg_name[], seg_N_TYPE[] is in correct order */
#if !defined (MANY_SEGMENTS) && !defined (BFD_ASSEMBLER)
know (SEG_MAXIMUM_ORDINAL == SEG_REGISTER);
#endif
- obstack_begin (&frags, 5000);
+ obstack_begin (&frchains, chunksize);
+#if __GNUC__ >= 2
+ obstack_alignment_mask (&frchains) = __alignof__ (frchainS) - 1;
+#endif
+
frchain_root = NULL;
- frchain_now = NULL; /* Warn new_subseg() that we are booting. */
- /* Fake up 1st frag. It won't be used=> is ok if obstack...
- pads the end of it for alignment. */
- frag_now = (fragS *) obstack_alloc (&frags, SIZEOF_STRUCT_FRAG);
- memset (frag_now, SIZEOF_STRUCT_FRAG, 0);
+ frchain_now = NULL; /* Warn new_subseg() that we are booting. */
+
+ frag_now = &dummy_frag;
#ifndef BFD_ASSEMBLER
- /* This 1st frag will not be in any frchain.
- We simply give subseg_new somewhere to scribble. */
- now_subseg = 42; /* Lie for 1st call to subseg_new. */
+ now_subseg = 42; /* Lie for 1st call to subseg_new. */
#ifdef MANY_SEGMENTS
{
int i;
#endif /* ! MANY_SEGMENTS */
#endif /* ! BFD_ASSEMBLER */
+ absolute_frchain.frch_seg = absolute_section;
+ absolute_frchain.frch_subseg = 0;
+#ifdef BFD_ASSEMBLER
+ absolute_frchain.fix_root = absolute_frchain.fix_tail = 0;
+#endif
+ absolute_frchain.frch_frag_now = &zero_address_frag;
+ absolute_frchain.frch_root = absolute_frchain.frch_last = &zero_address_frag;
}
\f
/*
* segment context correct.
*/
void
-subseg_change (seg, subseg)
- register segT seg;
- register int subseg;
+subseg_change (register segT seg, register int subseg)
{
now_seg = seg;
now_subseg = subseg;
+ if (now_seg == absolute_section)
+ return;
+
#ifdef BFD_ASSEMBLER
{
segment_info_type *seginfo;
if (! seginfo)
{
seginfo = (segment_info_type *) xmalloc (sizeof (*seginfo));
- if (! seginfo)
- abort ();
- seginfo->fix_root = 0;
- seginfo->fix_tail = 0;
+ memset ((PTR) seginfo, 0, sizeof (*seginfo));
+ seginfo->fix_root = NULL;
+ seginfo->fix_tail = NULL;
seginfo->bfd_section = seg;
seginfo->sym = 0;
- bfd_set_section_userdata (stdoutput, seg, (char *) seginfo);
+ if (seg == bfd_abs_section_ptr)
+ abs_seg_info = seginfo;
+ else if (seg == bfd_und_section_ptr)
+ und_seg_info = seginfo;
+ else
+ bfd_set_section_userdata (stdoutput, seg, (PTR) seginfo);
}
}
#else
}
\f
static void
-subseg_set_rest (seg, subseg)
- segT seg;
- subsegT subseg;
+subseg_set_rest (segT seg, subsegT subseg)
{
- long tmp; /* JF for obstack alignment hacking */
register frchainS *frcP; /* crawl frchain chain */
register frchainS **lastPP; /* address of last pointer */
frchainS *newP; /* address of new frchain */
- register fragS *former_last_fragP;
- register fragS *new_fragP;
- if (frag_now) /* If not bootstrapping. */
+ mri_common_symbol = NULL;
+
+ if (frag_now && frchain_now)
+ frchain_now->frch_frag_now = frag_now;
+
+ assert (frchain_now == 0
+ || now_seg == undefined_section
+ || now_seg == absolute_section
+ || frchain_now->frch_last == frag_now);
+
+ subseg_change (seg, (int) subseg);
+
+ if (seg == absolute_section)
{
- frag_now->fr_fix = (char*) obstack_next_free (&frags) - frag_now->fr_literal;
- frag_wane (frag_now); /* Close off any frag in old subseg. */
+ frchain_now = &absolute_frchain;
+ frag_now = &zero_address_frag;
+ return;
}
- /*
- * It would be nice to keep an obstack for each subsegment, if we swap
- * subsegments a lot. Hence we would have much fewer frag_wanes().
- */
- {
- obstack_finish (&frags);
- /*
- * If we don't do the above, the next object we put on obstack frags
- * will appear to start at the fr_literal of the current frag.
- * Also, above ensures that the next object will begin on a
- * address that is aligned correctly for the engine that runs
- * this program.
- */
- }
- subseg_change (seg, (int) subseg);
+
+ assert (frchain_now == 0
+ || now_seg == undefined_section
+ || frchain_now->frch_last == frag_now);
+
/*
* Attempt to find or make a frchain for that sub seg.
* Crawl along chain of frchainSs, begins @ frchain_root.
* position of chain rooted in frchain_root.
*/
for (frcP = *(lastPP = &frchain_root);
- frcP && (int) (frcP->frch_seg) <= (int) seg;
+ frcP && frcP->frch_seg <= seg;
frcP = *(lastPP = &frcP->frch_next))
{
- if ((int) (frcP->frch_seg) == (int) seg
+ if (frcP->frch_seg == seg
&& frcP->frch_subseg >= subseg)
{
break;
*
*/
if (!frcP
- || ((int) (frcP->frch_seg) > (int) seg
- || frcP->frch_subseg > subseg)) /* Kinky logic only works with 2 segments. */
+ || (frcP->frch_seg > seg
+ || frcP->frch_subseg > subseg)) /* Kinky logic only works with 2 segments. */
{
/*
* This should be the only code that creates a frchainS.
*/
- newP = (frchainS *) obstack_alloc (&frags, sizeof (frchainS));
- memset (newP, sizeof (frchainS), 0);
- /* This begines on a good boundary because a obstack_done()
- preceeded it. It implies an obstack_done(), so we expect
- the next object allocated to begin on a correct boundary. */
+ newP = (frchainS *) obstack_alloc (&frchains, sizeof (frchainS));
+ newP->frch_subseg = subseg;
+ newP->frch_seg = seg;
+#ifdef BFD_ASSEMBLER
+ newP->fix_root = NULL;
+ newP->fix_tail = NULL;
+#endif
+ obstack_begin (&newP->frch_obstack, chunksize);
+#if __GNUC__ >= 2
+ obstack_alignment_mask (&newP->frch_obstack) = __alignof__ (fragS) - 1;
+#endif
+ newP->frch_frag_now = frag_alloc (&newP->frch_obstack);
+ newP->frch_frag_now->fr_type = rs_fill;
+
+ newP->frch_root = newP->frch_last = newP->frch_frag_now;
+
*lastPP = newP;
newP->frch_next = frcP; /* perhaps NULL */
- (frcP = newP)->frch_subseg = subseg;
- newP->frch_seg = seg;
- newP->frch_last = NULL;
+
+#ifdef BFD_ASSEMBLER
+ {
+ segment_info_type *seginfo;
+ seginfo = seg_info (seg);
+ if (seginfo && seginfo->frchainP == frcP)
+ seginfo->frchainP = newP;
+ }
+#endif
+
+ frcP = newP;
}
/*
- * Here with frcP ->ing to the frchainS for subseg.
+ * Here with frcP pointing to the frchainS for subseg.
*/
frchain_now = frcP;
- /*
- * Make a fresh frag for the subsegment.
- */
- /* We expect this to happen on a correct boundary since it was
- proceeded by a obstack_done(). */
- tmp = obstack_alignment_mask (&frags); /* JF disable alignment */
- obstack_alignment_mask (&frags) = 0;
- frag_now = (fragS *) obstack_alloc (&frags, SIZEOF_STRUCT_FRAG);
- memset (frag_now, 0, SIZEOF_STRUCT_FRAG);
- obstack_alignment_mask (&frags) = tmp;
- /* But we want any more chars to come immediately after the
- structure we just made. */
- new_fragP = frag_now;
- new_fragP->fr_next = NULL;
- /*
- * Append new frag to current frchain.
- */
- former_last_fragP = frcP->frch_last;
- if (former_last_fragP)
- {
- know (former_last_fragP->fr_next == NULL);
- know (frchain_now->frch_root);
- former_last_fragP->fr_next = new_fragP;
- }
- else
- {
- frcP->frch_root = new_fragP;
- }
- frcP->frch_last = new_fragP;
+ frag_now = frcP->frch_frag_now;
+
+ assert (frchain_now->frch_last == frag_now);
}
/*
return new_seg;
}
#else
- as_bad ("Attempt to switch to nonexistent segment \"%s\"", segname);
+ as_bad (_("attempt to switch to nonexistent segment \"%s\""), segname);
return now_seg;
#endif
}
register subsegT subseg;
{
#ifndef MANY_SEGMENTS
- know (seg == SEG_DATA || seg == SEG_TEXT || seg == SEG_BSS);
+ know (seg == SEG_DATA
+ || seg == SEG_TEXT
+ || seg == SEG_BSS
+ || seg == SEG_ABSOLUTE);
#endif
if (seg != now_seg || subseg != now_subseg)
{ /* we just changed sub-segments */
subseg_set_rest (seg, subseg);
}
+ mri_common_symbol = NULL;
}
#else /* BFD_ASSEMBLER */
segT
-subseg_new (segname, subseg)
- const char *segname;
- subsegT subseg;
+subseg_get (const char *segname, int force_new)
{
segT secptr;
segment_info_type *seginfo;
? bfd_get_section_name (stdoutput, now_seg)
: 0);
- if (now_seg_name
+ if (!force_new
+ && now_seg_name
&& (now_seg_name == segname
- || !strcmp (now_seg_name, segname))
- && subseg == now_subseg)
+ || !strcmp (now_seg_name, segname)))
return now_seg;
- secptr = bfd_make_section_old_way (stdoutput, segname);
+ if (!force_new)
+ secptr = bfd_make_section_old_way (stdoutput, segname);
+ else
+ secptr = bfd_make_section_anyway (stdoutput, segname);
+
+#ifdef obj_sec_set_private_data
+ obj_sec_set_private_data (stdoutput, secptr);
+#endif
+
seginfo = seg_info (secptr);
if (! seginfo)
{
- secptr->output_section = secptr;
+ /* Check whether output_section is set first because secptr may
+ be bfd_abs_section_ptr. */
+ if (secptr->output_section != secptr)
+ secptr->output_section = secptr;
seginfo = (segment_info_type *) xmalloc (sizeof (*seginfo));
- seginfo->fix_root = 0;
- seginfo->fix_tail = 0;
+ memset ((PTR) seginfo, 0, sizeof (*seginfo));
+ seginfo->fix_root = NULL;
+ seginfo->fix_tail = NULL;
seginfo->bfd_section = secptr;
- bfd_set_section_userdata (stdoutput, secptr, (char *) seginfo);
- subseg_set_rest (secptr, subseg);
- seginfo->frchainP = frchain_now;
- seginfo->lineno_list_head = seginfo->lineno_list_tail = 0;
- seginfo->sym = 0;
- seginfo->dot = 0;
- seginfo->hadone = 0;
- seginfo->user_stuff = 0;
+ if (secptr == bfd_abs_section_ptr)
+ abs_seg_info = seginfo;
+ else if (secptr == bfd_und_section_ptr)
+ und_seg_info = seginfo;
+ else
+ bfd_set_section_userdata (stdoutput, secptr, (PTR) seginfo);
+ seginfo->frchainP = NULL;
+ seginfo->lineno_list_head = seginfo->lineno_list_tail = NULL;
+ seginfo->sym = NULL;
+ seginfo->dot = NULL;
}
- else
- subseg_set_rest (secptr, subseg);
+ return secptr;
+}
+
+segT
+subseg_new (const char *segname, subsegT subseg)
+{
+ segT secptr;
+ segment_info_type *seginfo;
+
+ secptr = subseg_get (segname, 0);
+ subseg_set_rest (secptr, subseg);
+ seginfo = seg_info (secptr);
+ if (! seginfo->frchainP)
+ seginfo->frchainP = frchain_now;
+ return secptr;
+}
+
+/* Like subseg_new, except a new section is always created, even if
+ a section with that name already exists. */
+segT
+subseg_force_new (const char *segname, subsegT subseg)
+{
+ segT secptr;
+ segment_info_type *seginfo;
+
+ secptr = subseg_get (segname, 1);
+ subseg_set_rest (secptr, subseg);
+ seginfo = seg_info (secptr);
+ if (! seginfo->frchainP)
+ seginfo->frchainP = frchain_now;
return secptr;
}
void
-subseg_set (secptr, subseg)
- segT secptr;
- subsegT subseg;
+subseg_set (segT secptr, subsegT subseg)
{
if (! (secptr == now_seg && subseg == now_subseg))
subseg_set_rest (secptr, subseg);
+ mri_common_symbol = NULL;
+}
+
+#ifndef obj_sec_sym_ok_for_reloc
+#define obj_sec_sym_ok_for_reloc(SEC) 0
+#endif
+
+/* Get the gas information we are storing for a section. */
+
+segment_info_type *
+seg_info (segT sec)
+{
+ if (sec == bfd_abs_section_ptr)
+ return abs_seg_info;
+ else if (sec == bfd_und_section_ptr)
+ return und_seg_info;
+ else
+ return (segment_info_type *) bfd_get_section_userdata (stdoutput, sec);
+}
+
+symbolS *
+section_symbol (segT sec)
+{
+ segment_info_type *seginfo = seg_info (sec);
+ symbolS *s;
+
+ if (seginfo == 0)
+ abort ();
+ if (seginfo->sym)
+ return seginfo->sym;
+
+#ifndef EMIT_SECTION_SYMBOLS
+#define EMIT_SECTION_SYMBOLS 1
+#endif
+
+ if (! EMIT_SECTION_SYMBOLS || symbol_table_frozen)
+ {
+ /* Here we know it won't be going into the symbol table. */
+ s = symbol_create (sec->symbol->name, sec, 0, &zero_address_frag);
+ }
+ else
+ {
+ segT seg;
+ s = symbol_find_base (sec->symbol->name, 0);
+ /* We have to make sure it is the right symbol when we
+ have multiple sections with the same section name. */
+ if (s == NULL
+ || ((seg = S_GET_SEGMENT (s)) != sec
+ && seg != undefined_section))
+ s = symbol_new (sec->symbol->name, sec, 0, &zero_address_frag);
+ else if (seg == undefined_section)
+ {
+ S_SET_SEGMENT (s, sec);
+ symbol_set_frag (s, &zero_address_frag);
+ }
+ }
+
+ S_CLEAR_EXTERNAL (s);
+
+ /* Use the BFD section symbol, if possible. */
+ if (obj_sec_sym_ok_for_reloc (sec))
+ symbol_set_bfdsym (s, sec->symbol);
+ else
+ symbol_get_bfdsym (s)->flags |= BSF_SECTION_SYM;
+
+ seginfo->sym = s;
+ return s;
}
#endif /* BFD_ASSEMBLER */
+/* Return whether the specified segment is thought to hold text. */
+
+#ifndef BFD_ASSEMBLER
+const char * const nontext_section_names[] = {
+ ".eh_frame",
+ ".gcc_except_table",
+#ifdef OBJ_COFF
+#ifndef COFF_LONG_SECTION_NAMES
+ ".eh_fram",
+ ".gcc_exc",
+#endif
+#endif
+ NULL
+};
+#endif /* ! BFD_ASSEMBLER */
+
+int
+subseg_text_p (segT sec)
+{
+#ifdef BFD_ASSEMBLER
+ return (bfd_get_section_flags (stdoutput, sec) & SEC_CODE) != 0;
+#else /* ! BFD_ASSEMBLER */
+ const char * const *p;
+
+ if (sec == data_section || sec == bss_section || sec == absolute_section)
+ return 0;
+
+ for (p = nontext_section_names; *p != NULL; ++p)
+ {
+ if (strcmp (segment_name (sec), *p) == 0)
+ return 0;
+
+#ifdef obj_segment_name
+ if (strcmp (obj_segment_name (sec), *p) == 0)
+ return 0;
+#endif
+ }
+
+ return 1;
+
+#endif /* ! BFD_ASSEMBLER */
+}
+
+void
+subsegs_print_statistics (FILE *file)
+{
+ frchainS *frchp;
+ fprintf (file, "frag chains:\n");
+ for (frchp = frchain_root; frchp; frchp = frchp->frch_next)
+ {
+ int count = 0;
+ fragS *fragp;
+
+ /* If frch_subseg is non-zero, it's probably been chained onto
+ the end of a previous subsection. Don't count it again. */
+ if (frchp->frch_subseg != 0)
+ continue;
+
+ /* Skip gas-internal sections. */
+ if (segment_name (frchp->frch_seg)[0] == '*')
+ continue;
+
+ for (fragp = frchp->frch_root; fragp; fragp = fragp->fr_next)
+ {
+#if 0
+ switch (fragp->fr_type)
+ {
+ case rs_fill:
+ fprintf (file, "f"); break;
+ case rs_align:
+ fprintf (file, "a"); break;
+ case rs_align_code:
+ fprintf (file, "c"); break;
+ case rs_org:
+ fprintf (file, "o"); break;
+ case rs_machine_dependent:
+ fprintf (file, "m"); break;
+ case rs_space:
+ fprintf (file, "s"); break;
+ case 0:
+ fprintf (file, "0"); break;
+ default:
+ fprintf (file, "?"); break;
+ }
+#endif
+ count++;
+ }
+ fprintf (file, "\n");
+ fprintf (file, "\t%p %-10s\t%10d frags\n", (void *) frchp,
+ segment_name (frchp->frch_seg), count);
+ }
+}
+
/* end of subsegs.c */