if { [istarget mips*-*-*] } then {
set no_mips16 0
- set svr4pic [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] ]
- set empic [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
- set aout [expr [istarget *-*-bsd*] || [istarget *-*-netbsd*] || [istarget *-*-openbsd*] ]
+ set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
+ set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
+ set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
set ilocks [istarget mipstx39*-*-*]
set gpr_ilocks [expr [istarget mipstx39*-*-*]]
set addr32 [expr [istarget mipstx39*-*-*]]
- if { [istarget mips*el-*-*] || [istarget "mips*-*-*linux*"] } then {
+ if { [istarget "mips*-*-*linux*"] } then {
set tmips "t"
} else {
set tmips ""
}
+ if [istarget mips*el-*-*] {
+ set el el
+ } {
+ set el ""
+ }
run_dump_test "abs"
run_dump_test "add"
run_dump_test "bltu"
if !$ilocks { run_dump_test "div" } else { run_dump_test "div-ilocks" }
run_dump_test "dli"
- if $svr4pic {
+ if $elf {
run_dump_test "elf-jal"
} else {
run_dump_test "jal"
}
- if $svr4pic { run_dump_test "jal-svr4pic" }
- if $svr4pic { run_dump_test "jal-xgot" }
- if $empic { run_dump_test "jal-empic" }
+ if $elf { run_dump_test "jal-svr4pic" }
+ if $elf { run_dump_test "jal-xgot" }
+ if $ecoff { run_dump_test "jal-empic" }
if !$aout { run_dump_test "la" }
- if $svr4pic { run_dump_test "la-svr4pic" }
- if $svr4pic { run_dump_test "la-xgot" }
- if $empic { run_dump_test "la-empic" }
+ if $elf { run_dump_test "la-svr4pic" }
+ if $elf { run_dump_test "la-xgot" }
+ if $ecoff { run_dump_test "la-empic" }
if !$aout { run_dump_test "lb" }
- if $svr4pic { run_dump_test "lb-svr4pic" }
- if $svr4pic {
+ if $elf { run_dump_test "lb-svr4pic" }
+ if $elf {
# Both versions specify the cpu, so we can run both regardless of
# the interlocking in the configured default cpu.
run_dump_test "lb-xgot"
run_dump_test "lb-xgot-ilocks"
}
- if $empic { run_dump_test "lb-empic" }
+ if $ecoff { run_dump_test "lb-empic" }
if !$aout {
if !$gpr_ilocks {
run_dump_test "ld"
}
}
}
- if $svr4pic { run_dump_test "ld-svr4pic" }
- if $svr4pic { run_dump_test "ld-xgot" }
- if $empic { run_dump_test "ld-empic" }
+ if $elf { run_dump_test "ld-svr4pic" }
+ if $elf { run_dump_test "ld-xgot" }
+ if $ecoff { run_dump_test "ld-empic" }
run_dump_test "li"
if !$aout { run_dump_test "lifloat" }
- if $svr4pic { run_dump_test "lif-svr4pic" }
- if $svr4pic { run_dump_test "lif-xgot" }
- if $empic { run_dump_test "lif-empic" }
+ if $elf { run_dump_test "lif-svr4pic" }
+ if $elf { run_dump_test "lif-xgot" }
+ if $ecoff { run_dump_test "lif-empic" }
run_dump_test "mips4"
if !$ilocks { run_dump_test "mul" } else { run_dump_test "mul-ilocks" }
run_dump_test "rol"
if !$aout { run_dump_test "sb" }
run_dump_test "trunc"
if !$aout { run_dump_test "ulh" }
- if $svr4pic { run_dump_test "ulh-svr4pic" }
- if $svr4pic { run_dump_test "ulh-xgot" }
- if $empic { run_dump_test "ulh-empic" }
+ if $elf { run_dump_test "ulh-svr4pic" }
+ if $elf { run_dump_test "ulh-xgot" }
+ if $ecoff { run_dump_test "ulh-empic" }
if !$aout {
run_dump_test "ulw"
run_dump_test "uld"
}
# The mips16 test can only be run on ELF, because only ELF
# supports the necessary mips16 reloc.
- if { $svr4pic && !$no_mips16 } { run_dump_test "mips16" }
+ if { $elf && !$no_mips16 } { run_dump_test "mips16" }
run_dump_test "delay"
run_dump_test "nodelay"
run_dump_test "mips4010"
run_dump_test "mips4650"
run_dump_test "mips4100"
+ run_dump_test "perfcount"
# Linux uses ELF stabs, which doesn't support line number.
setup_xfail "mips*-*-*linux*"
run_dump_test "lineno"
run_dump_test "sync"
run_dump_test "mips32"
run_dump_test "mips64"
+ run_dump_test "sb1-ext-ps"
+
+ # It will always fail until someone fixes it.
+ setup_xfail "mips*-*-*"
+ run_dump_test "relax"
run_list_test "illegal" ""
- if $svr4pic {
+ run_dump_test "mips-gp32-fp32"
+ run_dump_test "mips-gp32-fp64"
+ run_dump_test "mips-gp64-fp32"
+ run_dump_test "mips-gp64-fp64"
+
+ if $elf {
# Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
# containing 4650-specific instructions with -m4650 and -mcpu=4650,
# and verify that they're the same. Specifically, we're checking
run_dump_test "elf_e_flags3"
run_dump_test "elf_e_flags4"
- if [istarget mips*el-*-*] {
- run_dump_test "elfel-rel"
- } {
- run_dump_test "elf-rel"
- }
+ run_dump_test "mips-gp32-fp32-pic"
+ run_dump_test "mips-gp32-fp64-pic"
+ run_dump_test "mips-gp64-fp32-pic"
+ run_dump_test "mips-gp64-fp64-pic"
- if [istarget mips64*-*-*] {
- if [istarget mips*el-*-*] {
- run_dump_test "elfel-rel2"
- } {
- run_dump_test "elf-rel2"
- }
- } {
- if [istarget mips*el-*-*] {
- run_dump_test "e32el-rel2"
- } {
- run_dump_test "e32-rel2"
- }
- }
-
- if [istarget mips*el-*-*] {
- run_dump_test "elfel-rel3"
- } {
- run_dump_test "elf-rel3"
- }
+ run_dump_test "mips-abi32"
+ run_dump_test "mips-abi32-pic"
- if [istarget mips*el-*-*] {
- run_dump_test "${tmips}elempic"
+ run_dump_test "elf${el}-rel"
+ if [istarget mips64*-*-*] {
+ run_dump_test "elf${el}-rel2"
+ run_dump_test "elf-rel4"
} {
- run_dump_test "${tmips}empic"
+ run_dump_test "e32${el}-rel2"
+ run_dump_test "e32-rel4"
}
-
+ run_dump_test "elf${el}-rel3"
+ run_dump_test "${tmips}${el}empic"
+ run_dump_test "empic2"
if { !$no_mips16 } {
- if [istarget mips*el-*-*] {
- run_dump_test "${tmips}mipsel16-e"
- } {
- run_dump_test "${tmips}mips16-e"
- }
- setup_xfail "mips*-*-*"
- if [istarget mips*el-*-*] {
- run_dump_test "mipsel16-f"
- } {
- run_dump_test "mips16-f"
- }
+ run_dump_test "${tmips}mips${el}16-e"
+ run_dump_test "${tmips}mips${el}16-f"
}
}
}
projects / deliverable / binutils-gdb.git / blobdiff