-# Copyright (C) 1993, 1994, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-# 2004, 2005, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# Copyright (C) 1993-2015 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# This file was written by Ken Raeburn (raeburn@cygnus.com).
+proc load_common_lib { name } {
+ global srcdir
+ load_file $srcdir/../../binutils/testsuite/lib/$name
+}
+
+load_common_lib binutils-common.exp
+
proc gas_version {} {
global AS
if [is_remote host] then {
set return_contents_of "gas.stderr"
} elseif [regexp ">&.*" $redir] then {
# See PR 5322 for why the following line is used.
- regsub ">&" $redir "" output_file
+ regsub ">&" $redir "" output_file
set command "$cmd 2>&1"
} elseif [regexp "2>.*" $redir] then {
set output_file "gas.out"
return
}
-# True if the object format is known to be ELF.
-#
-proc is_elf_format {} {
- if { ![istarget *-*-sysv4*]
- && ![istarget *-*-unixware*]
- && ![istarget *-*-elf*]
- && ![istarget *-*-eabi*]
- && ![istarget *-*-rtems*]
- && ![istarget hppa*64*-*-hpux*]
- && ![istarget ia64-*-hpux*]
- && ![istarget *-*-linux*]
- && ![istarget *-*-gnu*]
- && ![istarget frv-*-uclinux*]
- && ![istarget bfin-*-uclinux]
- && ![istarget sh*-*-uclinux*]
- && ![istarget *-*-irix5*]
- && ![istarget *-*-irix6*]
- && ![istarget *-*-netbsd*]
- && ![istarget *-*-openbsd*]
- && ![istarget *-*-solaris2*] } {
- return 0
- }
-
- if { [istarget *-*-linux*aout*]
- || [istarget *-*-linux*oldld*]
- || [istarget h8500-*-rtems*]
- || [istarget i960-*-rtems*]
- || [istarget *-*-rtemscoff*] } {
- return 0
- }
-
- if { ![istarget *-*-netbsdelf*]
- && ([istarget *-*-netbsd*aout*]
- || [istarget *-*-netbsdpe*]
- || [istarget arm*-*-netbsd*]
- || [istarget sparc-*-netbsd*]
- || [istarget i*86-*-netbsd*]
- || [istarget m68*-*-netbsd*]
- || [istarget vax-*-netbsd*]
- || [istarget ns32k-*-netbsd*]) } {
- return 0
- }
-
- if { [istarget arm-*-openbsd*]
- || [istarget i386-*-openbsd\[0-2\].*]
- || [istarget i386-*-openbsd3.\[0-2\]]
- || [istarget m68*-*-openbsd*]
- || [istarget ns32k-*-openbsd*]
- || [istarget sparc-*-openbsd\[0-2\].*]
- || [istarget sparc-*-openbsd3.\[0-1\]]
- || [istarget vax-*-openbsd*] } {
- return 0
- }
-
- return 1
-}
-
-# True if the object format is known to be a.out.
-#
-proc is_aout_format {} {
- if { [istarget *-*-netbsdelf]
- || [istarget sparc64-*-netbsd*]
- || [istarget sparc64-*-openbsd*] } {
- return 0
- }
- if { [istarget *-*-*\[ab\]out*]
- || [istarget *-*-linux*oldld*]
- || [istarget *-*-bsd*]
- || [istarget *-*-msdos*]
- || [istarget arm-*-netbsd*]
- || [istarget arm-*-openbsd*]
- || [istarget arm-*-riscix*]
- || [istarget i?86-*-freebsd\[12\]*]
- || [istarget i?86-*-netbsd*]
- || [istarget i?86-*-openbsd\[0-2\]*]
- || [istarget i?86-*-openbsd3.\[0-2\]*]
- || [istarget i?86-*-vsta]
- || [istarget i?86-*-mach*]
- || [istarget m68*-*-netbsd*]
- || [istarget m68*-*-openbsd*]
- || [istarget ns32k-*-*]
- || [istarget pdp11-*-*]
- || [istarget sparc*-*-sunos4*]
- || [istarget sparc*-*-netbsd*]
- || [istarget sparc*-*-openbsd\[0-2\]*]
- || [istarget sparc*-*-openbsd3.\[0-1\]*]
- || [istarget sparc*-fujitsu-none]
- || [istarget vax-dec-ultrix*]
- || [istarget vax-*-netbsd] } {
- return 1
- }
- return 0
-}
-
-# True if the object format is known to be PE COFF.
-#
-proc is_pecoff_format {} {
- if { ![istarget *-*-mingw*]
- && ![istarget *-*-cygwin*]
- && ![istarget *-*-cegcc*]
- && ![istarget *-*-pe*] } {
- return 0
- }
-
- return 1
-}
-
# Internal procedure: return the names of the standard sections
#
proc get_standard_section_names {} {
if [istarget "rx-*-*"] {
return { "P" "D_1" "B_1" }
}
+ if [istarget "alpha*-*-*vms*"] {
+ # Double quote: for TCL and for sh.
+ return { "\\\$CODE\\\$" "\\\$DATA\\\$" "\\\$BSS\\\$" }
+ }
return
}
#
# After the option lines come regexp lines. `run_dump_test' calls
# `regexp_diff' to compare the output of the dumping tool against the
-# regexps in FILE.d. `regexp_diff' is defined later in this file; see
-# further comments there.
+# regexps in FILE.d. `regexp_diff' is defined in binutils-common.exp;
+# see further comments there.
proc run_dump_test { name {extra_options {}} } {
global subdir srcdir
if { $opts(not-skip) != "" } then {
set skip 1
foreach glob $opts(not-skip) {
- if {[istarget $glob]} {
+ if {[istarget $glob]} {
set skip 0
break
}
}
set skip 1
foreach glob $opts(target) {
- if {[istarget $glob]} {
+ if {[istarget $glob]} {
set skip 0
break
}
}
- if {$skip} {
+ if {$skip} {
unsupported $testname
- return
+ return
}
}
if { $opts(not-target) != "" } then {
foreach glob $opts(not-target) {
if {[istarget $glob]} {
unsupported $testname
- return
+ return
}
}
}
-
if { $opts(source) == "" } {
set sourcefile ${file}.s
} else {
}
set stderrfile $srcdir/$subdir/$opts(stderr)
verbose "wrote pruned stderr to dump.stderr" 3
- if { [regexp_diff "dump.stderr" "$stderrfile" ""] } then {
+ if { [regexp_diff "dump.stderr" "$stderrfile"] } then {
if { $opts(error) != "" } {
verbose -log "$exitstat with: <$comp_output>, expected: <$opts(error)>"
if [regexp $opts(error) $comp_output] {
set redir ""
}
- # Ensure consistent sorting of symbols
- if {[info exists env(LC_ALL)]} {
- set old_lc_all $env(LC_ALL)
- }
- set env(LC_ALL) "C"
send_log "$cmd\n"
set status [gas_host_run "$cmd" "$redir"]
set comp_output [prune_warnings [lindex $status 1]]
- if {[info exists old_lc_all]} {
- set env(LC_ALL) $old_lc_all
- } else {
- unset env(LC_ALL)
- }
set comp_output [prune_warnings $comp_output]
if ![string match "" $comp_output] then {
send_log "$comp_output\n"
eof { perror "eof" }
}
-# regexp_diff, based on simple_diff taken from ld test suite.
-# Compares two files line-by-line.
-# FILE_1 contains strings, FILE_2 contains regexps and #-comments
-# Blank lines are ignored in either file.
-# Subsitutions in REF_SUBST are applied on FILE_2 lines.
-# Returns non-zero if differences exist.
-#
-proc regexp_diff { file_1 file_2 ref_subst} {
-
- set eof -1
- set end_1 0
- set end_2 0
- set differences 0
- set diff_pass 0
-
- if [file exists $file_1] then {
- set file_a [open $file_1 r]
- } else {
- perror "$file_1 doesn't exist"
- return 1
- }
-
- if [file exists $file_2] then {
- set file_b [open $file_2 r]
- } else {
- perror "$file_2 doesn't exist"
- close $file_a
- return 1
- }
-
- verbose " Regexp-diff'ing: $file_1 $file_2" 2
-
- while { 1 } {
- set line_a ""
- set line_b ""
- while { [string length $line_a] == 0 } {
- # Ignore blank line in FILE_1.
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
- if [ string match "#pass" $line_b ] {
- set end_2 1
- set diff_pass 1
- break
- } elseif [ string match "#..." $line_b ] {
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- set diff_pass 1
- break
- }
- # Substitute on the reference.
- foreach {name value} $ref_subst {
- regsub -- $name $line_b $value line_b
- }
- verbose "looking for \"^$line_b$\"" 3
- while { ![regexp "^$line_b$" "$line_a"] } {
- verbose "skipping \"$line_a\"" 3
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- break
- }
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- break
- }
- }
-
- if { $diff_pass } {
- break
- } elseif { $end_1 && $end_2 } {
- break
- } elseif { $end_1 } {
- send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
- verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
- set differences 1
- break
- } elseif { $end_2 } {
- send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
- verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
- set differences 1
- break
- } else {
- # Substitute on the reference.
- foreach {name value} $ref_subst {
- regsub -- $name $line_b $value line_b
- }
- verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
- if ![regexp "^$line_b$" "$line_a"] {
- send_log "regexp_diff match failure\n"
- send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
- verbose "regexp_diff match failure\n" 3
- set differences 1
- }
- }
- }
-
- if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
- send_log "$file_1 and $file_2 are different lengths\n"
- verbose "$file_1 and $file_2 are different lengths" 3
- set differences 1
- }
-
- close $file_a
- close $file_b
-
- return $differences
-}
-
proc file_contents { filename } {
set file [open $filename r]
set contents [read $file]
}
set file $srcdir/$subdir/$name
gas_run ${name}.s $opts ">&dump.out"
- if { [regexp_diff "dump.out" "${file}.l" ""] } then {
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
}
set file $srcdir/$subdir/$name
gas_run_stdin ${name}.s $opts ">&dump.out"
- if { [regexp_diff "dump.out" "${file}.l" ""] } then {
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
projects / deliverable / binutils-gdb.git / blobdiff