-# Copyright (C) 1993, 1994, 1997 Free Software Foundation, Inc.
+# Copyright (C) 1993-2020 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+# MA 02110-1301, USA.
# Please email any bugs, comments, and/or additions to this file to:
-# DejaGnu@cygnus.com
+# dejagnu@gnu.org
# This file was written by Ken Raeburn (raeburn@cygnus.com).
+proc load_common_lib { name } {
+ global srcdir
+ load_file $srcdir/../../binutils/testsuite/lib/$name
+}
+
+load_common_lib binutils-common.exp
+
proc gas_version {} {
global AS
- catch "exec $AS -version < /dev/null" tmp
+ if [is_remote host] then {
+ remote_exec host "$AS -version < /dev/null" "" "" "gas.version"
+ remote_exec host "which $AS" "" "" "gas.which"
+
+ remote_upload host "gas.version"
+ remote_upload host "gas.which"
+
+ set which_as [file_contents "gas.which"]
+ set tmp [file_contents "gas.version"]
+
+ remote_file build delete "gas.version"
+ remote_file build delete "gas.which"
+ remote_file host delete "gas.version"
+ remote_file host delete "gas.which"
+ } else {
+ set which_as [which $AS]
+ catch "exec $AS -version < /dev/null" tmp
+ }
+
# Should find a way to discard constant parts, keep whatever's
# left, so the version string could be almost anything at all...
regexp "\[^\n\]* (cygnus-|)(\[-0-9.a-zA-Z-\]+)\[\r\n\].*" $tmp version cyg number
if ![info exists number] then {
- return "[which $AS] (no version number)\n"
+ return "$which_as (no version number)\n"
}
- clone_output "[which $AS] $number\n"
+ clone_output "$which_as $number\n"
unset version
}
+proc gas_host_run { cmd redir } {
+ verbose "Executing $cmd $redir"
+ set return_contents_of ""
+ if [regexp ">& */dev/null" $redir] then {
+ set output_file ""
+ set command "$cmd $redir"
+ } elseif [regexp "> */dev/null" $redir] then {
+ set output_file ""
+ set command "$cmd 2>gas.stderr"
+ set return_contents_of "gas.stderr"
+ } elseif [regexp ">&.*" $redir] then {
+ # See PR 5322 for why the following line is used.
+ regsub ">&" $redir "" output_file
+ set command "$cmd 2>&1"
+ } elseif [regexp "2>.*" $redir] then {
+ set output_file "gas.out"
+ set command "$cmd $redir"
+ set return_contents_of "gas.out"
+ } elseif [regexp ">.*" $redir] then {
+ set output_file ""
+ set command "$cmd $redir 2>gas.stderr"
+ set return_contents_of "gas.stderr"
+ } elseif { "$redir" == "" } then {
+ set output_file "gas.out"
+ set command "$cmd 2>&1"
+ set return_contents_of "gas.out"
+ } else {
+ fail "gas_host_run: unknown form of redirection string"
+ }
+
+ set status [remote_exec host [concat sh -c [list $command]] "" "/dev/null" "$output_file"]
+ set to_return ""
+ if { "$return_contents_of" != "" } then {
+ remote_upload host "$return_contents_of"
+ set to_return [file_contents "$return_contents_of"]
+ regsub "\n$" $to_return "" to_return
+ }
+
+ if { [lindex $status 0] == 0 && "$output_file" != ""
+ && "$output_file" != "$return_contents_of" } then {
+ remote_upload host "$output_file"
+ }
+
+ return [list [lindex $status 0] "$to_return"]
+}
+
proc gas_run { prog as_opts redir } {
global AS
global ASFLAGS
global subdir
global host_triplet
- verbose "Executing $srcdir/lib/run $AS $ASFLAGS $as_opts $srcdir/$subdir/$prog $redir"
- catch "exec $srcdir/lib/run $AS $ASFLAGS $as_opts $srcdir/$subdir/$prog $redir" comp_output
+ set status [gas_host_run "$AS $ASFLAGS $as_opts $srcdir/$subdir/$prog" "$redir"]
+ set comp_output [lindex $status 1]
+ if { [lindex $status 0] != 0 && [regexp "2>.*" $redir] } then {
+ append comp_output "child process exited abnormally"
+ }
+ set comp_output [prune_warnings $comp_output]
+ verbose "output was $comp_output"
+ return [list $comp_output ""]
+}
+
+proc gas_run_stdin { prog as_opts redir } {
+ global AS
+ global ASFLAGS
+ global comp_output
+ global srcdir
+ global subdir
+ global host_triplet
+
+ set status [gas_host_run "$AS $ASFLAGS $as_opts < $srcdir/$subdir/$prog" "$redir"]
+ set comp_output [lindex $status 1]
+ if { [lindex $status 0] != 0 && [regexp "2>.*" $redir] } then {
+ append comp_output "child process exited abnormally"
+ }
set comp_output [prune_warnings $comp_output]
verbose "output was $comp_output"
- return [list $comp_output ""];
+ return [list $comp_output ""]
}
proc all_ones { args } {
return 1
}
+# ${tool}_finish (gas_finish) will be called by runtest.exp. But
+# gas_finish should only be used with gas_start. We use gas_started
+# to tell gas_finish if gas_start has been called so that runtest.exp
+# can call gas_finish without closing the wrong fd.
+set gas_started 0
+
proc gas_start { prog as_opts } {
global AS
global ASFLAGS
global srcdir
global subdir
global spawn_id
+ global gas_started
- verbose "Starting $AS $ASFLAGS $as_opts $prog" 2
- catch {
- spawn -noecho -nottycopy $srcdir/lib/run $AS $ASFLAGS $as_opts $srcdir/$subdir/$prog
- } foo
- if ![regexp {^[0-9]+} $foo] then {
- perror "Can't run $subdir/$prog: $foo"
- }
+ set gas_started 1
+
+ verbose -log "Starting $AS $ASFLAGS $as_opts $prog" 2
+ set status [gas_host_run "$AS $ASFLAGS $as_opts $srcdir/$subdir/$prog" ">&gas.out"]
+ spawn -noecho -nottycopy cat gas.out
}
proc gas_finish { } {
global spawn_id
+ global gas_started
- catch "close"
- catch "wait"
+ if { $gas_started == 1 } {
+ catch "close"
+ catch "wait"
+ set gas_started 0
+ }
}
proc want_no_output { testname } {
global comp_output
gas_run $file $as_opts ">/dev/null"
- if ![string match "" $comp_output] then {
- send_log "$comp_output\n"
- verbose "$comp_output" 3
- }
- if [string match "" $comp_output] then {
- fail "$testname"
- } else {
+ send_log "$comp_output\n"
+ verbose "$comp_output" 3
+ if { ![string match "" $comp_output]
+ && ![string match "*Assertion failure*" $comp_output]
+ && ![string match "*Internal error*" $comp_output] } then {
pass "$testname"
+ } else {
+ fail "$testname"
}
}
case "$target_cpu" in {
"m68???" { set target_cpu_family m68k }
- "i[34]86" { set target_cpu_family i386 }
+ "i[3-7]86" { set target_cpu_family i386 }
default { set target_cpu_family $target_cpu }
}
return
}
+# run_dump_tests TESTCASES EXTRA_OPTIONS
+# Wrapper for run_dump_test, which is suitable for invoking as
+# run_dump_tests [lsort [glob -nocomplain $srcdir/$subdir/*.d]]
+# EXTRA_OPTIONS are passed down to run_dump_test. Honors runtest_file_p.
+# Body cribbed from dg-runtest.
-# run_dump_test FILE
-#
-# Assemble a .s file, then run some utility on it and check the output.
-#
-# There should be an assembly language file named FILE.s in the test
-# suite directory, and a pattern file called FILE.d. `run_dump_test'
-# will assemble FILE.s, run some tool like `objdump', `objcopy', or
-# `nm' on the .o file to produce textual output, and then analyze that
-# with regexps. The FILE.d file specifies what program to run, and
-# what to expect in its output.
-#
-# The FILE.d file begins with zero or more option lines, which specify
-# flags to pass to the assembler, the program to run to dump the
-# assembler's output, and the options it wants. The option lines have
-# the syntax:
-#
-# # OPTION: VALUE
-#
-# OPTION is the name of some option, like "name" or "objdump", and
-# VALUE is OPTION's value. The valid options are described below.
-# Whitespace is ignored everywhere, except within VALUE. The option
-# list ends with the first line that doesn't match the above syntax
-# (hmm, not great for error detection).
-#
-# The interesting options are:
-#
-# name: TEST-NAME
-# The name of this test, passed to DejaGNU's `pass' and `fail'
-# commands. If omitted, this defaults to FILE, the root of the
-# .s and .d files' names.
-#
-# as: FLAGS
-# When assembling FILE.s, pass FLAGS to the assembler.
-#
-# PROG: PROGRAM-NAME
-# The name of the program to run to analyze the .o file produced
-# by the assembler. This can be omitted; run_dump_test will guess
-# which program to run by seeing which of the flags options below
-# is present.
-#
-# objdump: FLAGS
-# nm: FLAGS
-# objcopy: FLAGS
-# Use the specified program to analyze the .o file, and pass it
-# FLAGS, in addition to the .o file name.
-#
-# source: SOURCE
-# Assemble the file SOURCE.s. If omitted, this defaults to FILE.s.
-# This is useful if several .d files want to share a .s file.
-#
-# Each option may occur at most once.
-#
-# After the option lines come regexp lines. `run_dump_test' calls
-# `regexp_diff' to compare the output of the dumping tool against the
-# regexps in FILE.d. `regexp_diff' is defined later in this file; see
-# further comments there.
-
-proc run_dump_test { name } {
- global subdir srcdir
- global OBJDUMP NM AS OBJCOPY
- global OBJDUMPFLAGS NMFLAGS ASFLAGS OBJCOPYFLAGS
- global host_triplet
-
- if [string match "*/*" $name] {
- set file $name
- set name [file tail $name]
- } else {
- set file "$srcdir/$subdir/$name"
- }
- set opt_array [slurp_options "${file}.d"]
- if { $opt_array == -1 } {
- perror "error reading options from $file.d"
- unresolved $subdir/$name
- return
- }
- set opts(as) {}
- set opts(objdump) {}
- set opts(nm) {}
- set opts(objcopy) {}
- set opts(name) {}
- set opts(PROG) {}
- set opts(source) {}
-
- foreach i $opt_array {
- set opt_name [lindex $i 0]
- set opt_val [lindex $i 1]
- if ![info exists opts($opt_name)] {
- perror "unknown option $opt_name in file $file.d"
- unresolved $subdir/$name
- return
- }
- if [string length $opts($opt_name)] {
- perror "option $opt_name multiply set in $file.d"
- unresolved $subdir/$name
- return
- }
- set opts($opt_name) $opt_val
- }
-
- if {$opts(PROG) != ""} {
- switch -- $opts(PROG) {
- objdump
- { set program objdump }
- nm
- { set program nm }
- objcopy
- { set program objcopy }
- default
- { perror "unrecognized program option $opts(PROG) in $file.d"
- unresolved $subdir/$name
- return }
- }
- } else {
- # Guess which program to run, by seeing which option was specified.
- set program ""
- foreach p {objdump objcopy nm} {
- if {$opts($p) != ""} {
- if {$program != ""} {
- perror "ambiguous dump program in $file.d"
- unresolved $subdir/$name
- return
- } else {
- set program $p
- }
- }
- }
- if {$program == ""} {
- perror "dump program unspecified in $file.d"
- unresolved $subdir/$name
- return
- }
- }
-
- set progopts1 $opts($program)
- eval set progopts \$[string toupper $program]FLAGS
- eval set binary \$[string toupper $program]
- if { $opts(name) == "" } {
- set testname "$subdir/$name"
- } else {
- set testname $opts(name)
- }
-
- if { $opts(source) == "" } {
- set sourcefile ${file}.s
- } else {
- set sourcefile $srcdir/$subdir/$opts(source)
- }
-
- send_log "$AS $ASFLAGS $opts(as) -o dump.o $sourcefile\n"
- catch "exec $srcdir/lib/run $AS $ASFLAGS $opts(as) -o dump.o $sourcefile" comp_output
- set comp_output [prune_warnings $comp_output]
+proc run_dump_tests { testcases {extra_options {}} } {
+ global runtests
- if ![string match "" $comp_output] then {
- send_log "$comp_output\n"
- verbose "$comp_output" 3
- fail $testname
- return
- }
-
- if { [which $binary] == 0 } {
- untested $testname
- return
- }
-
- if { $progopts1 == "" } { set $progopts1 "-r" }
- verbose "running $binary $progopts $progopts1" 3
-
- # Objcopy, unlike the other two, won't send its output to stdout,
- # so we have to run it specially.
- if { $program == "objcopy" } {
- send_log "$binary $progopts $progopts1 dump.o dump.out\n"
- catch "exec $binary $progopts $progopts1 dump.o dump.out" comp_output
- set comp_output [prune_warnings $comp_output]
- if ![string match "" $comp_output] then {
- send_log "$comp_output\n"
- fail $testname
- return
- }
- } else {
- send_log "$binary $progopts $progopts1 dump.o > dump.out\n"
- catch "exec $binary $progopts $progopts1 dump.o > dump.out" comp_output
- set comp_output [prune_warnings $comp_output]
- if ![string match "" $comp_output] then {
- send_log "$comp_output\n"
- fail $testname
- return
- }
- }
-
- verbose_eval {[file_contents "dump.out"]} 3
- if { [regexp_diff "dump.out" "${file}.d"] } then {
- fail $testname
- verbose "output is [file_contents "dump.out"]" 2
- return
- }
-
- pass $testname
-}
-
-proc slurp_options { file } {
- if [catch { set f [open $file r] } x] {
- #perror "couldn't open `$file': $x"
- perror "$x"
- return -1
- }
- set opt_array {}
- # whitespace expression
- set ws {[ ]*}
- set nws {[^ ]*}
- # whitespace is ignored anywhere except within the options list;
- # option names are alphabetic only
- set pat "^#${ws}(\[a-zA-Z\]*)$ws:${ws}(.*)$ws\$"
- while { [gets $f line] != -1 } {
- set line [string trim $line]
- # Whitespace here is space-tab.
- if [regexp $pat $line xxx opt_name opt_val] {
- # match!
- lappend opt_array [list $opt_name $opt_val]
- } else {
- break
- }
+ foreach testcase $testcases {
+ # If testing specific files and this isn't one of them, skip it.
+ if ![runtest_file_p $runtests $testcase] {
+ continue
+ }
+ run_dump_test [file rootname [file tail $testcase]] $extra_options
}
- close $f
- return $opt_array
}
proc objdump { opts } {
global comp_output
global host_triplet
- catch "exec $OBJDUMP $opts" comp_output
- set comp_output [prune_warnings $comp_output]
+ set status [gas_host_run "$OBJDUMP $opts" ""]
+ set comp_output [prune_warnings [lindex $status 1]]
verbose "objdump output=$comp_output\n" 3
}
global spawn_id
verbose "Starting $OBJDUMP $opts $prog" 2
- catch {
- spawn -noecho -nottyinit $srcdir/lib/run $OBJDUMP $opts $prog
- } foo
- if ![regexp {^[0-9]+} $foo] then {
- perror "Can't run $prog: $foo"
- }
+ set status [gas_host_run "$OBJDUMP $opts $prog" ">&gas.out"]
+ spawn -noecho -nottycopy cat gas.out
}
proc objdump_finish { } {
eof { perror "eof" }
}
-# regexp_diff, based on simple_diff taken from ld test suite
-# compares two files line-by-line
-# file1 contains strings, file2 contains regexps and #-comments
-# blank lines are ignored in either file
-# returns non-zero if differences exist
-#
-proc regexp_diff { file_1 file_2 } {
-
- set eof -1
- set end_1 0
- set end_2 0
- set differences 0
- set diff_pass 0
-
- if [file exists $file_1] then {
- set file_a [open $file_1 r]
- } else {
- warning "$file_1 doesn't exist"
- return 1
- }
-
- if [file exists $file_2] then {
- set file_b [open $file_2 r]
- } else {
- fail "$file_2 doesn't exist"
- close $file_a
- return 1
- }
-
- verbose " Regexp-diff'ing: $file_1 $file_2" 2
-
- while { 1 } {
- set line_a ""
- set line_b ""
- while { [string length $line_a] == 0 } {
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
- if [ string match "#pass" $line_b ] {
- set end_2 1
- set diff_pass 1
- break
- } elseif [ string match "#..." $line_b ] {
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- break
- }
- verbose "looking for \"^$line_b$\"" 3
- while { ![regexp "^$line_b$" "$line_a"] } {
- verbose "skipping \"$line_a\"" 3
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- break
- }
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- break
- }
- }
-
- if { $diff_pass } {
- break
- } elseif { $end_1 && $end_2 } {
- break
- } elseif { $end_1 } {
- send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
- verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
- set differences 1
- break
- } elseif { $end_2 } {
- send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
- verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
- set differences 1
- break
- } else {
- verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
- if ![regexp "^$line_b$" "$line_a"] {
- send_log "regexp_diff match failure\n"
- send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
- set differences 1
- break
- }
- }
- }
-
- if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
- send_log "$file_1 and $file_2 are different lengths\n"
- verbose "$file_1 and $file_2 are different lengths" 3
- set differences 1
- }
-
- close $file_a
- close $file_b
-
- return $differences
-}
-
proc file_contents { filename } {
set file [open $filename r]
set contents [read $file]
return $contents
}
+proc write_file { filename contents } {
+ set file [open $filename w]
+ puts $file "$contents"
+ close $file
+}
+
proc verbose_eval { expr { level 1 } } {
global verbose
if $verbose>$level then { eval verbose "$expr" $level }
return $text
}
}
+
+# run_list_test NAME (optional): OPTS TESTNAME
+#
+# Assemble the file "NAME.s" with command line options OPTS and
+# compare the assembler standard error output against the regular
+# expressions given in the file "NAME.l". If TESTNAME is provided,
+# it will be used as the name of the test.
+
+proc run_list_test { name {opts {}} {testname {}} } {
+ global srcdir subdir
+ if { [string length $testname] == 0 } then {
+ set testname "[file tail $subdir] $name"
+ }
+ set file $srcdir/$subdir/$name
+ gas_run ${name}.s $opts ">&dump.out"
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
+ fail $testname
+ verbose "output is [file_contents "dump.out"]" 2
+ return
+ }
+ pass $testname
+}
+
+# run_list_test_stdin NAME (optional): OPTS TESTNAME
+#
+# Similar to run_list_test, but use stdin as input.
+
+proc run_list_test_stdin { name {opts {}} {testname {}} } {
+ global srcdir subdir
+ if { [string length $testname] == 0 } then {
+ set testname "[file tail $subdir] $name"
+ }
+ set file $srcdir/$subdir/$name
+ gas_run_stdin ${name}.s $opts ">&dump.out"
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
+ fail $testname
+ verbose "output is [file_contents "dump.out"]" 2
+ return
+ }
+ pass $testname
+}
projects / deliverable / binutils-gdb.git / blobdiff