/* write.c - emit .o file
Copyright 1986, 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001
+ 1998, 1999, 2000, 2001, 2002, 2003
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#include "output-file.h"
#include "dwarf2dbg.h"
-/* This looks like a good idea. Let's try turning it on always, for now. */
-#undef BFD_FAST_SECTION_FILL
-#define BFD_FAST_SECTION_FILL
-
#ifndef TC_ADJUST_RELOC_COUNT
-#define TC_ADJUST_RELOC_COUNT(FIXP,COUNT)
+#define TC_ADJUST_RELOC_COUNT(FIX, COUNT)
#endif
#ifndef TC_FORCE_RELOCATION
-#define TC_FORCE_RELOCATION(FIXP) 0
+#define TC_FORCE_RELOCATION(FIX) \
+ (generic_force_reloc (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_ABS
+#define TC_FORCE_RELOCATION_ABS(FIX) \
+ (TC_FORCE_RELOCATION (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_LOCAL
+#define TC_FORCE_RELOCATION_LOCAL(FIX) \
+ (!(FIX)->fx_pcrel \
+ || (FIX)->fx_plt \
+ || TC_FORCE_RELOCATION (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_SUB_SAME
+#define TC_FORCE_RELOCATION_SUB_SAME(FIX, SEG) \
+ (! SEG_NORMAL (SEG))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_SUB_ABS
+#define TC_FORCE_RELOCATION_SUB_ABS(FIX) 0
#endif
-#ifndef TC_FORCE_RELOCATION_SECTION
-#define TC_FORCE_RELOCATION_SECTION(FIXP,SEG) TC_FORCE_RELOCATION(FIXP)
+#ifndef TC_FORCE_RELOCATION_SUB_LOCAL
+#ifdef DIFF_EXPR_OK
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX) 0
+#else
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX) 1
+#endif
+#endif
+
+#ifndef TC_VALIDATE_FIX_SUB
+#ifdef UNDEFINED_DIFFERENCE_OK
+/* The PA needs this for PIC code generation. */
+#define TC_VALIDATE_FIX_SUB(FIX) 1
+#else
+#ifdef BFD_ASSEMBLER
+#define TC_VALIDATE_FIX_SUB(FIX) \
+ ((FIX)->fx_r_type == BFD_RELOC_GPREL32 \
+ || (FIX)->fx_r_type == BFD_RELOC_GPREL16)
+#else
+#define TC_VALIDATE_FIX_SUB(FIX) 0
+#endif
+#endif
#endif
#ifndef TC_LINKRELAX_FIXUP
#define TC_LINKRELAX_FIXUP(SEG) 1
#endif
-#ifndef TC_FIX_ADJUSTABLE
-#define TC_FIX_ADJUSTABLE(fix) 1
+#ifndef MD_APPLY_SYM_VALUE
+#define MD_APPLY_SYM_VALUE(FIX) 1
+#endif
+
+#ifndef TC_FINALIZE_SYMS_BEFORE_SIZE_SEG
+#define TC_FINALIZE_SYMS_BEFORE_SIZE_SEG 1
#endif
#ifndef MD_PCREL_FROM_SECTION
-#define MD_PCREL_FROM_SECTION(FIXP, SEC) md_pcrel_from(FIXP)
+#define MD_PCREL_FROM_SECTION(FIX, SEC) md_pcrel_from (FIX)
#endif
#ifndef WORKING_DOT_WORD
-extern CONST int md_short_jump_size;
-extern CONST int md_long_jump_size;
+extern const int md_short_jump_size;
+extern const int md_long_jump_size;
#endif
/* Used to control final evaluation of expressions. */
int finalize_syms = 0;
int symbol_table_frozen;
+
+symbolS *abs_section_sym;
+
+/* Remember the value of dot when parsing expressions. */
+addressT dot_value;
+
void print_fixup PARAMS ((fixS *));
#ifdef BFD_ASSEMBLER
static int n_fixups;
#ifdef BFD_ASSEMBLER
-static fixS *fix_new_internal PARAMS ((fragS *, int where, int size,
- symbolS *add, symbolS *sub,
- offsetT offset, int pcrel,
- bfd_reloc_code_real_type r_type));
+#define RELOC_ENUM enum bfd_reloc_code_real
#else
+#define RELOC_ENUM int
+#endif
+
static fixS *fix_new_internal PARAMS ((fragS *, int where, int size,
symbolS *add, symbolS *sub,
offsetT offset, int pcrel,
- int r_type));
-#endif
+ RELOC_ENUM r_type));
#if defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS))
-static long fixup_segment PARAMS ((fixS * fixP, segT this_segment_type));
+static long fixup_segment PARAMS ((fixS *, segT));
#endif
static relax_addressT relax_align PARAMS ((relax_addressT addr, int align));
#if defined (BFD_ASSEMBLER) || ! defined (BFD)
static void chain_frchains_together PARAMS ((bfd *, segT, PTR));
static void cvt_frag_to_fill PARAMS ((segT, fragS *));
static void adjust_reloc_syms PARAMS ((bfd *, asection *, PTR));
+static void fix_segment PARAMS ((bfd *, asection *, PTR));
static void write_relocs PARAMS ((bfd *, asection *, PTR));
static void write_contents PARAMS ((bfd *, asection *, PTR));
static void set_symtab PARAMS ((void));
static void remove_subsegs PARAMS ((frchainS *, int, fragS **, fragS **));
static void relax_and_size_all_segments PARAMS ((void));
#endif
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
-static void set_segment_vma PARAMS ((bfd *, asection *, PTR));
-#endif
/* Create a fixS in obstack 'notes'. */
symbolS *sub_symbol; /* X_op_symbol. */
offsetT offset; /* X_add_number. */
int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+ RELOC_ENUM r_type ATTRIBUTE_UNUSED; /* Relocation type. */
{
fixS *fixP;
fixP->fx_addsy = add_symbol;
fixP->fx_subsy = sub_symbol;
fixP->fx_offset = offset;
+ fixP->fx_dot_value = dot_value;
fixP->fx_pcrel = pcrel;
fixP->fx_plt = 0;
#if defined(NEED_FX_R_TYPE) || defined (BFD_ASSEMBLER)
symbolS *add_symbol; /* X_add_symbol. */
offsetT offset; /* X_add_number. */
int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+ RELOC_ENUM r_type; /* Relocation type. */
{
return fix_new_internal (frag, where, size, add_symbol,
(symbolS *) NULL, offset, pcrel, r_type);
int size; /* 1, 2, or 4 usually. */
expressionS *exp; /* Expression. */
int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+ RELOC_ENUM r_type; /* Relocation type. */
{
symbolS *add = NULL;
symbolS *sub = NULL;
return fix_new_internal (frag, where, size, add, sub, off, pcrel, r_type);
}
+/* Generic function to determine whether a fixup requires a relocation. */
+int
+generic_force_reloc (fix)
+ fixS *fix;
+{
+#ifdef BFD_ASSEMBLER
+ if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 1;
+#endif
+ return S_FORCE_RELOC (fix->fx_addsy, fix->fx_subsy == NULL);
+}
+
/* Append a string onto another string, bumping the pointer along. */
void
append (charPP, fromP, length)
as_bad_where (fragP->fr_file, fragP->fr_line,
_("attempt to .org/.space backwards? (%ld)"),
(long) fragP->fr_offset);
+ fragP->fr_offset = 0;
}
fragP->fr_type = rs_fill;
break;
else
flags &= ~SEC_RELOC;
x = bfd_set_section_flags (abfd, sec, flags);
- assert (x == true);
+ assert (x);
newsize = md_section_align (sec, size);
x = bfd_set_section_size (abfd, sec, newsize);
- assert (x == true);
+ assert (x);
/* If the size had to be rounded up, add some padding in the last
non-empty frag. */
while (fragp->fr_next != last)
fragp = fragp->fr_next;
last->fr_address = size;
- fragp->fr_offset += newsize - size;
+ if ((newsize - size) % fragp->fr_var == 0)
+ fragp->fr_offset += (newsize - size) / fragp->fr_var;
+ else
+ /* If we hit this abort, it's likely due to subsegs_finish not
+ providing sufficient alignment on the last frag, and the
+ machine dependent code using alignment frags with fr_var
+ greater than 1. */
+ abort ();
}
#ifdef tc_frob_section
#define EMIT_SECTION_SYMBOLS 1
#endif
+/* This pass over fixups decides whether symbols can be replaced with
+ section symbols. */
+
static void
adjust_reloc_syms (abfd, sec, xxx)
bfd *abfd ATTRIBUTE_UNUSED;
point. It is possible to see unresolved expression
symbols, though, since they are not in the regular symbol
table. */
- if (sym != NULL)
- resolve_symbol_value (sym);
+ resolve_symbol_value (sym);
if (fixp->fx_subsy != NULL)
resolve_symbol_value (fixp->fx_subsy);
/* If this symbol is equated to an undefined symbol, convert
the fixup to being against that symbol. */
- if (sym != NULL && symbol_equated_p (sym)
- && (! S_IS_DEFINED (sym) || S_IS_COMMON (sym)))
+ if (symbol_equated_reloc_p (sym))
{
fixp->fx_offset += symbol_get_value_expression (sym)->X_add_number;
sym = symbol_get_value_expression (sym)->X_add_symbol;
fixp->fx_addsy = sym;
}
- if (sym != NULL && symbol_mri_common_p (sym))
+ if (symbol_mri_common_p (sym))
{
/* These symbols are handled specially in fixup_segment. */
- goto done;
+ continue;
}
- symsec = S_GET_SEGMENT (sym);
+ /* If the symbol is undefined, common, weak, or global (ELF
+ shared libs), we can't replace it with the section symbol. */
+ if (S_FORCE_RELOC (fixp->fx_addsy, 1))
+ continue;
+ /* Is there some other (target cpu dependent) reason we can't adjust
+ this one? (E.g. relocations involving function addresses on
+ the PA. */
+#ifdef tc_fix_adjustable
+ if (! tc_fix_adjustable (fixp))
+ continue;
+#endif
+
+ /* Since we're reducing to section symbols, don't attempt to reduce
+ anything that's already using one. */
+ if (symbol_section_p (sym))
+ continue;
+
+ symsec = S_GET_SEGMENT (sym);
if (symsec == NULL)
abort ();
if (bfd_is_abs_section (symsec))
{
- /* The fixup_segment routine will not use this symbol in a
- relocation unless TC_FORCE_RELOCATION returns 1. */
- if (TC_FORCE_RELOCATION (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- if (fixp->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- }
- goto done;
- }
-
- /* If it's one of these sections, assume the symbol is
- definitely going to be output. The code in
- md_estimate_size_before_relax in tc-mips.c uses this test
- as well, so if you change this code you should look at that
- code. */
- if (bfd_is_und_section (symsec)
- || bfd_is_com_section (symsec))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- /* We have the difference of an undefined symbol and some
- other symbol. Make sure to mark the other symbol as used
- in a relocation so that it will always be output. */
- if (fixp->fx_subsy)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- goto done;
+ /* The fixup_segment routine normally will not use this
+ symbol in a relocation. */
+ continue;
}
/* Don't try to reduce relocs which refer to non-local symbols
this will always be correct. */
if (symsec != sec && ! S_IS_LOCAL (sym))
{
- boolean linkonce;
-
- linkonce = false;
-#ifdef BFD_ASSEMBLER
- if ((bfd_get_section_flags (stdoutput, symsec) & SEC_LINK_ONCE)
- != 0)
- linkonce = true;
-#endif
-#ifdef OBJ_ELF
- /* The GNU toolchain uses an extension for ELF: a section
- beginning with the magic string .gnu.linkonce is a
- linkonce section. */
- if (strncmp (segment_name (symsec), ".gnu.linkonce",
- sizeof ".gnu.linkonce" - 1) == 0)
- linkonce = true;
-#endif
-
- if (linkonce)
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- if (fixp->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- goto done;
- }
- }
-
- /* Since we're reducing to section symbols, don't attempt to reduce
- anything that's already using one. */
- if (symbol_section_p (sym))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-
-#ifdef BFD_ASSEMBLER
- /* We can never adjust a reloc against a weak symbol. If we
- did, and the weak symbol was overridden by a real symbol
- somewhere else, then our relocation would be pointing at
- the wrong area of memory. */
- if (S_IS_WEAK (sym))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-
- /* Never adjust a reloc against local symbol in a merge section. */
- if (symsec->flags & SEC_MERGE)
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
-
- /* Is there some other reason we can't adjust this one? (E.g.,
- call/bal links in i960-bout symbols.) */
-#ifdef obj_fix_adjustable
- if (! obj_fix_adjustable (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
+ if ((symsec->flags & SEC_LINK_ONCE) != 0
+ || (IS_ELF
+ /* The GNU toolchain uses an extension for ELF: a
+ section beginning with the magic string
+ .gnu.linkonce is a linkonce section. */
+ && strncmp (segment_name (symsec), ".gnu.linkonce",
+ sizeof ".gnu.linkonce" - 1) == 0))
+ continue;
}
-#endif
- /* Is there some other (target cpu dependent) reason we can't adjust
- this one? (E.g. relocations involving function addresses on
- the PA. */
-#ifdef tc_fix_adjustable
- if (! tc_fix_adjustable (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
+ /* Never adjust a reloc against local symbol in a merge section
+ with non-zero addend. */
+ if ((symsec->flags & SEC_MERGE) != 0
+ && (fixp->fx_offset != 0 || fixp->fx_subsy != NULL))
+ continue;
- /* If the section symbol isn't going to be output, the relocs
- at least should still work. If not, figure out what to do
- when we run into that case.
+ /* Never adjust a reloc against TLS local symbol. */
+ if ((symsec->flags & SEC_THREAD_LOCAL) != 0)
+ continue;
- We refetch the segment when calling section_symbol, rather
+ /* We refetch the segment when calling section_symbol, rather
than using symsec, because S_GET_VALUE may wind up changing
the section when it calls resolve_symbol_value. */
fixp->fx_offset += S_GET_VALUE (sym);
fixp->fx_addsy = section_symbol (S_GET_SEGMENT (sym));
- symbol_mark_used_in_reloc (fixp->fx_addsy);
#ifdef DEBUG5
fprintf (stderr, "\nadjusted fixup:\n");
print_fixup (fixp);
#endif
-
- done:
- ;
- }
-#if 1 /* def RELOC_REQUIRES_SYMBOL */
- else
- {
- /* There was no symbol required by this relocation. However,
- BFD doesn't really handle relocations without symbols well.
- (At least, the COFF support doesn't.) So for now we fake up
- a local symbol in the absolute section. */
-
- fixp->fx_addsy = section_symbol (absolute_section);
-#if 0
- fixp->fx_addsy->sy_used_in_reloc = 1;
-#endif
}
-#endif
dump_section_relocs (abfd, sec, stderr);
}
+static void
+fix_segment (abfd, sec, xxx)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ asection *sec;
+ PTR xxx ATTRIBUTE_UNUSED;
+{
+ segment_info_type *seginfo = seg_info (sec);
+
+ fixup_segment (seginfo->fix_root, sec);
+}
+
static void
write_relocs (abfd, sec, xxx)
bfd *abfd;
if (seginfo == NULL)
return;
- fixup_segment (seginfo->fix_root, sec);
-
n = 0;
for (fixp = seginfo->fix_root; fixp; fixp = fixp->fx_next)
n++;
#ifndef RELOC_EXPANSION_POSSIBLE
/* Set up reloc information as well. */
- relocs = (arelent **) xmalloc (n * sizeof (arelent *));
- memset ((char *) relocs, 0, n * sizeof (arelent *));
+ relocs = (arelent **) xcalloc (n, sizeof (arelent *));
i = 0;
for (fixp = seginfo->fix_root; fixp != (fixS *) NULL; fixp = fixp->fx_next)
}
/* If this is an undefined symbol which was equated to another
- symbol, then use generate the reloc against the latter symbol
+ symbol, then generate the reloc against the latter symbol
rather than the former. */
sym = fixp->fx_addsy;
- while (symbol_equated_p (sym)
- && (! S_IS_DEFINED (sym) || S_IS_COMMON (sym)))
+ while (symbol_equated_reloc_p (sym))
{
symbolS *n;
case bfd_reloc_ok:
break;
case bfd_reloc_overflow:
- as_bad_where (fixp->fx_file, fixp->fx_line, _("relocation overflow"));
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation overflow"));
break;
case bfd_reloc_outofrange:
- as_bad_where (fixp->fx_file, fixp->fx_line, _("relocation out of range"));
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation out of range"));
break;
default:
as_fatal (_("%s:%u: bad return from bfd_install_relocation: %x"),
#else
n = n * MAX_RELOC_EXPANSION;
/* Set up reloc information as well. */
- relocs = (arelent **) xmalloc (n * sizeof (arelent *));
+ relocs = (arelent **) xcalloc (n, sizeof (arelent *));
i = 0;
for (fixp = seginfo->fix_root; fixp != (fixS *) NULL; fixp = fixp->fx_next)
{
arelent **reloc;
- char *data;
bfd_reloc_status_type s;
symbolS *sym;
int j;
symbol, then generate the reloc against the latter symbol
rather than the former. */
sym = fixp->fx_addsy;
- while (symbol_equated_p (sym)
- && (! S_IS_DEFINED (sym) || S_IS_COMMON (sym)))
- sym = symbol_get_value_expression (sym)->X_add_symbol;
+ while (symbol_equated_reloc_p (sym))
+ {
+ symbolS *n;
+
+ /* We must avoid looping, as that can occur with a badly
+ written program. */
+ n = symbol_get_value_expression (sym)->X_add_symbol;
+ if (n == sym)
+ break;
+ fixp->fx_offset += symbol_get_value_expression (sym)->X_add_number;
+ sym = n;
+ }
fixp->fx_addsy = sym;
reloc = tc_gen_reloc (sec, fixp);
relocs[i++] = reloc[j];
assert (i <= n);
}
- data = fixp->fx_frag->fr_literal + fixp->fx_where;
if (fixp->fx_where + fixp->fx_size
> fixp->fx_frag->fr_fix + fixp->fx_frag->fr_offset)
as_bad_where (fixp->fx_file, fixp->fx_line,
as_bad_where (fixp->fx_file, fixp->fx_line,
_("relocation overflow"));
break;
+ case bfd_reloc_outofrange:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation out of range"));
+ break;
default:
- as_fatal (_("%s:%u: bad return from bfd_install_relocation"),
- fixp->fx_file, fixp->fx_line);
+ as_fatal (_("%s:%u: bad return from bfd_install_relocation: %x"),
+ fixp->fx_file, fixp->fx_line, s);
}
}
}
PTR xxx ATTRIBUTE_UNUSED;
{
segment_info_type *seginfo = seg_info (sec);
- unsigned long offset = 0;
+ addressT offset = 0;
fragS *f;
/* Write out the frags. */
f = f->fr_next)
{
int x;
- unsigned long fill_size;
+ addressT fill_size;
char *fill_literal;
- long count;
+ offsetT count;
assert (f->fr_type == rs_fill);
if (f->fr_fix)
x = bfd_set_section_contents (stdoutput, sec,
f->fr_literal, (file_ptr) offset,
(bfd_size_type) f->fr_fix);
- if (x == false)
+ if (!x)
{
bfd_perror (stdoutput->filename);
as_perror (_("FATAL: Can't write %s"), stdoutput->filename);
fill_literal,
(file_ptr) offset,
(bfd_size_type) fill_size);
- if (x == false)
+ if (!x)
{
bfd_perror (stdoutput->filename);
as_perror (_("FATAL: Can't write %s"),
x = bfd_set_section_contents
(stdoutput, sec, buf, (file_ptr) offset,
(bfd_size_type) n_per_buf * fill_size);
- if (x != true)
- as_fatal (_("Cannot write to output file."));
+ if (!x)
+ as_fatal (_("cannot write to output file"));
offset += n_per_buf * fill_size;
}
}
#ifdef OBJ_BOUT
/* See above comments on b.out data section address. */
{
- long bss_vma;
+ addressT bss_vma;
if (data_last_frag == 0)
bss_vma = H_GET_TEXT_SIZE (&headers);
else
int nsyms;
asymbol **asympp;
symbolS *symp;
- boolean result;
- extern PTR bfd_alloc PARAMS ((bfd *, size_t));
+ bfd_boolean result;
+ extern PTR bfd_alloc PARAMS ((bfd *, bfd_size_type));
/* Count symbols. We can't rely on a count made by the loop in
write_object_file, because *_frob_file may add a new symbol or
if (nsyms)
{
int i;
+ bfd_size_type amt = (bfd_size_type) nsyms * sizeof (asymbol *);
- asympp = (asymbol **) bfd_alloc (stdoutput,
- nsyms * sizeof (asymbol *));
+ asympp = (asymbol **) bfd_alloc (stdoutput, amt);
symp = symbol_rootP;
for (i = 0; i < nsyms; i++, symp = symbol_next (symp))
{
else
asympp = 0;
result = bfd_set_symtab (stdoutput, asympp, nsyms);
- assert (result == true);
+ assert (result);
symbol_table_frozen = 1;
}
#endif
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
-static void
-set_segment_vma (abfd, sec, xxx)
- bfd *abfd;
- asection *sec;
- PTR xxx ATTRIBUTE_UNUSED;
-{
- static bfd_vma addr = 0;
-
- bfd_set_section_vma (abfd, sec, addr);
- addr += bfd_section_size (abfd, sec);
-}
-#endif /* BFD_ASSEMBLER && OBJ_COFF && !TE_PE */
-
/* Finish the subsegments. After every sub-segment, we fake an
".align ...". This conforms to BSD4.2 brane-damage. We then fake
".fill 0" because that is the kind of frag that requires least
makes calculating their intended length trivial. */
#ifndef SUB_SEGMENT_ALIGN
+#ifdef HANDLE_ALIGN
+/* The last subsegment gets an aligment corresponding to the alignment
+ of the section. This allows proper nop-filling at the end of
+ code-bearing sections. */
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) \
+ (!(FRCHAIN)->frch_next || (FRCHAIN)->frch_next->frch_seg != (SEG) \
+ ? get_recorded_alignment (SEG) : 0)
+#else
#ifdef BFD_ASSEMBLER
-#define SUB_SEGMENT_ALIGN(SEG) (0)
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 0
#else
-#define SUB_SEGMENT_ALIGN(SEG) (2)
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 2
+#endif
#endif
#endif
for (frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next)
{
- int alignment;
+ int alignment = 0;
subseg_set (frchainP->frch_seg, frchainP->frch_subseg);
/* This now gets called even if we had errors. In that case,
any alignment is meaningless, and, moreover, will look weird
if we are generating a listing. */
- alignment = had_errors () ? 0 : SUB_SEGMENT_ALIGN (now_seg);
+ if (!had_errors ())
+ {
+ alignment = SUB_SEGMENT_ALIGN (now_seg, frchainP);
+#ifdef BFD_ASSEMBLER
+ if ((bfd_get_section_flags (now_seg->owner, now_seg) & SEC_MERGE)
+ && now_seg->entsize)
+ {
+ unsigned int entsize = now_seg->entsize;
+ int entalign = 0;
- /* The last subsegment gets an aligment corresponding to the
- alignment of the section. This allows proper nop-filling
- at the end of code-bearing sections. */
- if (!frchainP->frch_next || frchainP->frch_next->frch_seg != now_seg)
- alignment = get_recorded_alignment (now_seg);
+ while ((entsize & 1) == 0)
+ {
+ ++entalign;
+ entsize >>= 1;
+ }
+ if (entalign > alignment)
+ alignment = entalign;
+ }
+#endif
+ }
if (subseg_text_p (now_seg))
frag_align_code (alignment, 0);
if (flag_always_generate_output)
{
if (n_warns || n_errs)
- as_warn (_("%d error%s, %d warning%s, generating bad object file.\n"),
+ as_warn (_("%d error%s, %d warning%s, generating bad object file"),
n_errs, n_errs == 1 ? "" : "s",
n_warns, n_warns == 1 ? "" : "s");
}
else
{
if (n_errs)
- as_fatal (_("%d error%s, %d warning%s, no object file generated.\n"),
+ as_fatal (_("%d error%s, %d warning%s, no object file generated"),
n_errs, n_errs == 1 ? "" : "s",
n_warns, n_warns == 1 ? "" : "s");
}
#ifdef BFD_ASSEMBLER
/* Remove the sections created by gas for its own purposes. */
{
- asection **seclist, *sec;
+ asection **seclist;
int i;
seclist = &stdoutput->sections;
- while (seclist && *seclist)
+ while (*seclist)
{
- sec = *seclist;
- while (sec == reg_section || sec == expr_section)
+ if (*seclist == reg_section || *seclist == expr_section)
{
- sec = sec->next;
- *seclist = sec;
+ bfd_section_list_remove (stdoutput, seclist);
stdoutput->section_count--;
- if (!sec)
- break;
}
- if (*seclist)
+ else
seclist = &(*seclist)->next;
}
i = 0;
if (!changed)
break;
}
+
+ /* Note - Most ports will use the default value of
+ TC_FINALIZE_SYMS_BEFORE_SIZE_SEG, which 1. This will force
+ local symbols to be resolved, removing their frag information.
+ Some ports however, will not have finished relaxing all of
+ their frags and will still need the local symbol frag
+ information. These ports can set
+ TC_FINALIZE_SYMS_BEFORE_SIZE_SEG to 0. */
+ finalize_syms = TC_FINALIZE_SYMS_BEFORE_SIZE_SEG;
+
bfd_map_over_sections (stdoutput, size_seg, (char *) 0);
#else
relax_and_size_all_segments ();
/* Relaxation has completed. Freeze all syms. */
finalize_syms = 1;
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
- /* Now that the segments have their final sizes, run through the
- sections and set their vma and lma. !BFD gas sets them, and BFD gas
- should too. Currently, only DJGPP uses this code, but other
- COFF targets may need to execute this too. */
- bfd_map_over_sections (stdoutput, set_segment_vma, (char *) 0);
+#ifdef md_post_relax_hook
+ md_post_relax_hook;
#endif
#ifndef BFD_ASSEMBLER
#ifdef OBJ_BOUT
|| fragP->fr_next == data_frag_root
#endif
- || ((fragP->fr_next->fr_address - fragP->fr_address)
+ || ((offsetT) (fragP->fr_next->fr_address - fragP->fr_address)
== (fragP->fr_fix + fragP->fr_offset * fragP->fr_var))))
abort ();
#endif
/* Patch the jump table. */
/* This is the offset from ??? to table_ptr+0. */
to_addr = table_addr - S_GET_VALUE (lie->sub);
-#ifdef BFD_ASSEMBLER
- to_addr -= symbol_get_frag (lie->sub)->fr_address;
-#endif
#ifdef TC_CHECK_ADJUSTED_BROKEN_DOT_WORD
TC_CHECK_ADJUSTED_BROKEN_DOT_WORD (to_addr, lie);
#endif
/* This is a long jump from table_ptr+0 to the final target. */
from_addr = table_addr;
to_addr = S_GET_VALUE (lie->add) + lie->addnum;
-#ifdef BFD_ASSEMBLER
- to_addr += symbol_get_frag (lie->add)->fr_address;
-#endif
md_create_long_jump (table_ptr, from_addr, to_addr, lie->dispfrag,
lie->add);
table_ptr += md_long_jump_size;
obj_emit_strings (&next_object_file_charP);
#ifdef BFD_HEADERS
- bfd_seek (stdoutput, 0, 0);
- bfd_write (the_object_file, 1, object_file_size, stdoutput);
+ bfd_seek (stdoutput, (file_ptr) 0, 0);
+ bfd_bwrite (the_object_file, (bfd_size_type) object_file_size, stdoutput);
#else
/* Write the data to the file. */
bfd_map_over_sections (stdoutput, adjust_reloc_syms, (char *) 0);
+#ifdef tc_frob_file_before_fix
+ tc_frob_file_before_fix ();
+#endif
+#ifdef obj_frob_file_before_fix
+ obj_frob_file_before_fix ();
+#endif
+
+ bfd_map_over_sections (stdoutput, fix_segment, (char *) 0);
+
/* Set up symbol table, and write it out. */
if (symbol_rootP)
{
/* They only differ if `name' is a fb or dollar local
label name. */
if (name2 != name && ! S_IS_DEFINED (symp))
- as_bad (_("local label %s is not defined"), name2);
+ as_bad (_("local label `%s' is not defined"), name2);
}
/* Do it again, because adjust_reloc_syms might introduce
/* Skip symbols which were equated to undefined or common
symbols. */
- if (symbol_equated_p (symp)
- && (! S_IS_DEFINED (symp) || S_IS_COMMON (symp)))
+ if (symbol_equated_reloc_p (symp))
{
symbol_remove (symp, &symbol_rootP, &symbol_lastP);
continue;
want section symbols. Otherwise, we skip local symbols
and symbols that the frob_symbol macros told us to punt,
but we keep such symbols if they are used in relocs. */
- if ((! EMIT_SECTION_SYMBOLS
- && symbol_section_p (symp))
+ if (symp == abs_section_sym
+ || (! EMIT_SECTION_SYMBOLS
+ && symbol_section_p (symp))
/* Note that S_IS_EXTERN and S_IS_LOCAL are not always
opposites. Sometimes the former checks flags and the
latter examines the name... */
|| (!S_IS_EXTERN (symp)
- && (S_IS_LOCAL (symp) || punt)
+ && (punt || S_IS_LOCAL (symp))
&& ! symbol_used_in_reloc_p (symp)))
{
symbol_remove (symp, &symbol_rootP, &symbol_lastP);
/* Make sure we really got a value for the symbol. */
if (! symbol_resolved_p (symp))
{
- as_bad (_("can't resolve value for symbol \"%s\""),
+ as_bad (_("can't resolve value for symbol `%s'"),
S_GET_NAME (symp));
symbol_mark_resolved (symp);
}
const relax_typeS *start_type;
relax_substateT next_state;
relax_substateT this_state;
- long growth;
+ offsetT growth;
offsetT aim;
addressT target;
addressT address;
#endif
know (sym_frag != NULL);
#endif
- know (!(S_GET_SEGMENT (symbolP) == absolute_section)
+ know (S_GET_SEGMENT (symbolP) != absolute_section
|| sym_frag == &zero_address_frag);
- target += S_GET_VALUE (symbolP) + sym_frag->fr_address;
+ target += S_GET_VALUE (symbolP);
/* If frag has yet to be reached on this pass,
assume it will move by STRETCH just as we did.
if (offset % fragP->fr_var != 0)
{
- as_bad (_("alignment padding (%lu bytes) not a multiple of %ld"),
- (unsigned long) offset, (long) fragP->fr_var);
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("alignment padding (%lu bytes) not a multiple of %ld"),
+ (unsigned long) offset, (long) fragP->fr_var);
offset -= (offset % fragP->fr_var);
}
break;
case rs_machine_dependent:
+ /* If fr_symbol is an expression, this call to
+ resolve_symbol_value sets up the correct segment, which will
+ likely be needed in md_estimate_size_before_relax. */
+ if (fragP->fr_symbol)
+ resolve_symbol_value (fragP->fr_symbol);
+
address += md_estimate_size_before_relax (fragP, segment);
break;
/* Do relax(). */
{
- long stretch; /* May be any size, 0 or negative. */
+ offsetT stretch; /* May be any size, 0 or negative. */
/* Cumulative number of addresses we have relaxed this pass.
We may have relaxed more than one address. */
int stretched; /* Have we stretched on this pass? */
for (fragP = segment_frag_root; fragP; fragP = fragP->fr_next)
{
- long growth = 0;
+ offsetT growth = 0;
addressT was_address;
offsetT offset;
symbolS *symbolP;
if (lie->added)
continue;
- offset = (symbol_get_frag (lie->add)->fr_address
- + S_GET_VALUE (lie->add)
+ offset = (S_GET_VALUE (lie->add)
+ lie->addnum
- - (symbol_get_frag (lie->sub)->fr_address
- + S_GET_VALUE (lie->sub)));
+ - S_GET_VALUE (lie->sub));
if (offset <= -32768 || offset >= 32767)
{
if (flag_warn_displacement)
{
char buf[50];
sprint_value (buf, (addressT) lie->addnum);
- as_warn (_(".word %s-%s+%s didn't fit"),
- S_GET_NAME (lie->add),
- S_GET_NAME (lie->sub),
- buf);
+ as_warn_where (fragP->fr_file, fragP->fr_line,
+ _(".word %s-%s+%s didn't fit"),
+ S_GET_NAME (lie->add),
+ S_GET_NAME (lie->sub),
+ buf);
}
lie->added = 1;
if (fragP->fr_subtype == 0)
know (!(S_GET_SEGMENT (symbolP) == SEG_ABSOLUTE)
|| (symbolP->sy_frag == &zero_address_frag));
#endif
- target += (S_GET_VALUE (symbolP)
- + symbol_get_frag (symbolP)->fr_address);
- } /* if we have a symbol */
+ /* Convert from an actual address to an octet offset
+ into the section. Here it is assumed that the
+ section's VMA is zero, and can omit subtracting it
+ from the symbol's value to get the address offset. */
+ know (S_GET_SECTION (symbolP)->vma == 0);
+ target += S_GET_VALUE (symbolP) * OCTETS_PER_BYTE;
+ }
know (fragP->fr_next);
after = fragP->fr_next->fr_address;
cannot have fewer than 0 chars. That is, we can't
.org backwards. */
as_bad_where (fragP->fr_file, fragP->fr_line,
- _("attempt to .org backwards ignored"));
+ _("attempt to move .org backwards"));
/* We've issued an error message. Change the
frag to avoid cascading errors. */
}
case rs_space:
+ growth = 0;
if (symbolP)
{
- growth = S_GET_VALUE (symbolP);
- if (symbol_get_frag (symbolP) != &zero_address_frag
+ offsetT amount;
+
+ amount = S_GET_VALUE (symbolP);
+ if (S_GET_SEGMENT (symbolP) != absolute_section
|| S_IS_COMMON (symbolP)
|| ! S_IS_DEFINED (symbolP))
- as_bad_where (fragP->fr_file, fragP->fr_line,
- _(".space specifies non-absolute value"));
- fragP->fr_symbol = 0;
- if (growth < 0)
{
- as_warn (_(".space or .fill with negative value, ignored"));
- growth = 0;
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _(".space specifies non-absolute value"));
+ /* Prevent repeat of this error message. */
+ fragP->fr_symbol = 0;
+ }
+ else if (amount < 0)
+ {
+ as_warn_where (fragP->fr_file, fragP->fr_line,
+ _(".space or .fill with negative value, ignored"));
+ fragP->fr_symbol = 0;
}
+ else
+ growth = (was_address + fragP->fr_fix + amount
+ - fragP->fr_next->fr_address);
}
- else
- growth = 0;
break;
case rs_machine_dependent:
case rs_leb128:
{
valueT value;
- int size;
+ offsetT size;
value = resolve_symbol_value (fragP->fr_symbol);
size = sizeof_leb128 (value, fragP->fr_subtype);
#if defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS))
-#ifndef TC_RELOC_RTSYM_LOC_FIXUP
-#define TC_RELOC_RTSYM_LOC_FIXUP(X) (1)
-#endif
-
/* fixup_segment()
Go through all the fixS's in a segment and see which ones can be
handled now. (These consist of fixS where we have since discovered
the value of a symbol, or the address of the frag involved.)
- For each one, call md_apply_fix to put the fix into the frag data.
+ For each one, call md_apply_fix3 to put the fix into the frag data.
Result is a count of how many relocation structs will be needed to
handle the remaining fixS's that we couldn't completely handle here.
These will be output later by emit_relocations(). */
static long
-fixup_segment (fixP, this_segment_type)
- register fixS *fixP;
- segT this_segment_type; /* N_TYPE bits for segment. */
+fixup_segment (fixP, this_segment)
+ fixS *fixP;
+ segT this_segment;
{
long seg_reloc_count = 0;
- symbolS *add_symbolP;
- symbolS *sub_symbolP;
valueT add_number;
- int size;
- char *place;
- long where;
- int pcrel, plt;
fragS *fragP;
segT add_symbol_segment = absolute_section;
+ if (fixP != NULL && abs_section_sym == NULL)
+ {
+#ifndef BFD_ASSEMBLER
+ abs_section_sym = &abs_symbol;
+#else
+ abs_section_sym = section_symbol (absolute_section);
+#endif
+ }
+
/* If the linker is doing the relaxing, we must not do any fixups.
- Well, strictly speaking that's not true -- we could do any that are
- PC-relative and don't cross regions that could change size. And for the
- i960 (the only machine for which we've got a relaxing linker right now),
- we might be able to turn callx/callj into bal anyways in cases where we
- know the maximum displacement. */
- if (linkrelax && TC_LINKRELAX_FIXUP (this_segment_type))
+ Well, strictly speaking that's not true -- we could do any that
+ are PC-relative and don't cross regions that could change size.
+ And for the i960 we might be able to turn callx/callj into bal
+ anyways in cases where we know the maximum displacement. */
+ if (linkrelax && TC_LINKRELAX_FIXUP (this_segment))
{
for (; fixP; fixP = fixP->fx_next)
- seg_reloc_count++;
+ if (!fixP->fx_done)
+ {
+ if (fixP->fx_addsy == NULL)
+ {
+ /* There was no symbol required by this relocation.
+ However, BFD doesn't really handle relocations
+ without symbols well. So fake up a local symbol in
+ the absolute section. */
+ fixP->fx_addsy = abs_section_sym;
+ }
+ symbol_mark_used_in_reloc (fixP->fx_addsy);
+ if (fixP->fx_subsy != NULL)
+ symbol_mark_used_in_reloc (fixP->fx_subsy);
+ seg_reloc_count++;
+ }
TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
return seg_reloc_count;
}
fragP = fixP->fx_frag;
know (fragP);
- where = fixP->fx_where;
- place = fragP->fr_literal + where;
- size = fixP->fx_size;
- add_symbolP = fixP->fx_addsy;
#ifdef TC_VALIDATE_FIX
- TC_VALIDATE_FIX (fixP, this_segment_type, skip);
+ TC_VALIDATE_FIX (fixP, this_segment, skip);
#endif
- sub_symbolP = fixP->fx_subsy;
add_number = fixP->fx_offset;
- pcrel = fixP->fx_pcrel;
- plt = fixP->fx_plt;
- if (add_symbolP != NULL
- && symbol_mri_common_p (add_symbolP))
+ if (fixP->fx_addsy != NULL
+ && symbol_mri_common_p (fixP->fx_addsy))
{
- know (add_symbolP->sy_value.X_op == O_symbol);
- add_number += S_GET_VALUE (add_symbolP);
+ know (fixP->fx_addsy->sy_value.X_op == O_symbol);
+ add_number += S_GET_VALUE (fixP->fx_addsy);
fixP->fx_offset = add_number;
- add_symbolP = fixP->fx_addsy =
- symbol_get_value_expression (add_symbolP)->X_add_symbol;
+ fixP->fx_addsy
+ = symbol_get_value_expression (fixP->fx_addsy)->X_add_symbol;
}
- if (add_symbolP)
- add_symbol_segment = S_GET_SEGMENT (add_symbolP);
+ if (fixP->fx_addsy != NULL)
+ add_symbol_segment = S_GET_SEGMENT (fixP->fx_addsy);
- if (sub_symbolP)
+ if (fixP->fx_subsy != NULL)
{
- resolve_symbol_value (sub_symbolP);
- if (add_symbolP == NULL || add_symbol_segment == absolute_section)
+ segT sub_symbol_segment;
+ resolve_symbol_value (fixP->fx_subsy);
+ sub_symbol_segment = S_GET_SEGMENT (fixP->fx_subsy);
+ if (fixP->fx_addsy != NULL
+ && sub_symbol_segment == add_symbol_segment
+ && !TC_FORCE_RELOCATION_SUB_SAME (fixP, add_symbol_segment))
{
- if (add_symbolP != NULL)
- {
- add_number += S_GET_VALUE (add_symbolP);
- add_symbolP = NULL;
- fixP->fx_addsy = NULL;
- }
-
- /* It's just -sym. */
- if (S_GET_SEGMENT (sub_symbolP) == absolute_section)
- {
- add_number -= S_GET_VALUE (sub_symbolP);
- fixP->fx_subsy = NULL;
- }
- else if (pcrel
- && S_GET_SEGMENT (sub_symbolP) == this_segment_type)
- {
- /* Should try converting to a constant. */
- goto bad_sub_reloc;
- }
- else
- bad_sub_reloc:
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Negative of non-absolute symbol %s"),
- S_GET_NAME (sub_symbolP));
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = add_number;
+ /* If the back-end code has selected a pc-relative
+ reloc, adjust the value to be pc-relative. */
+ if (1
+#ifdef TC_M68K
+ /* See the comment below about 68k weirdness. */
+ && 0
+#endif
+ && fixP->fx_pcrel)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_addsy = NULL;
+ fixP->fx_subsy = NULL;
+ fixP->fx_pcrel = 0;
}
- else if (S_GET_SEGMENT (sub_symbolP) == add_symbol_segment
- && SEG_NORMAL (add_symbol_segment))
+ else if (sub_symbol_segment == absolute_section
+ && !TC_FORCE_RELOCATION_SUB_ABS (fixP))
{
- /* Difference of 2 symbols from same segment.
- Can't make difference of 2 undefineds: 'value' means
- something different for N_UNDF. */
-#ifdef TC_I960
- /* Makes no sense to use the difference of 2 arbitrary symbols
- as the target of a call instruction. */
- if (fixP->fx_tcbit)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("callj to difference of 2 symbols"));
-#endif /* TC_I960 */
- add_number += S_GET_VALUE (add_symbolP) -
- S_GET_VALUE (sub_symbolP);
-
- add_symbolP = NULL;
- pcrel = 0; /* No further pcrel processing. */
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION_SECTION (fixP, this_segment_type))
- {
- fixP->fx_pcrel = 0;
- fixP->fx_addsy = NULL;
- fixP->fx_subsy = NULL;
- }
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = add_number;
+ fixP->fx_subsy = NULL;
}
- else
+ else if (sub_symbol_segment == this_segment
+ && !TC_FORCE_RELOCATION_SUB_LOCAL (fixP))
{
- /* Different segments in subtraction. */
- know (!(S_IS_EXTERNAL (sub_symbolP)
- && (S_GET_SEGMENT (sub_symbolP) == absolute_section)));
-
- if ((S_GET_SEGMENT (sub_symbolP) == absolute_section))
- add_number -= S_GET_VALUE (sub_symbolP);
-
-#ifdef DIFF_EXPR_OK
- else if (S_GET_SEGMENT (sub_symbolP) == this_segment_type
-#if 0
- /* Do this even if it's already described as
- pc-relative. For example, on the m68k, an
- operand of "pc@(foo-.-2)" should address
- "foo" in a pc-relative mode. */
- && pcrel
-#endif
- )
- {
- /* Make it pc-relative. */
- add_number += (MD_PCREL_FROM_SECTION (fixP, this_segment_type)
- - S_GET_VALUE (sub_symbolP));
- pcrel = 1;
- fixP->fx_pcrel = 1;
- sub_symbolP = 0;
- fixP->fx_subsy = 0;
- }
-#endif
-#ifdef UNDEFINED_DIFFERENCE_OK
- /* The PA needs this for PIC code generation. We basically
- don't want to do anything if we have the difference of two
- symbols at this point. */
- else if (1)
- {
- /* Leave it alone. */
- }
-#endif
-#ifdef BFD_ASSEMBLER
- else if (fixP->fx_r_type == BFD_RELOC_GPREL32
- || fixP->fx_r_type == BFD_RELOC_GPREL16)
- {
- /* Leave it alone. */
- }
-#endif
- else
- {
- char buf[50];
- sprint_value (buf, fragP->fr_address + where);
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Subtraction of two symbols in different sections \"%s\" {%s section} - \"%s\" {%s section} at file address %s."),
- S_GET_NAME (add_symbolP),
- segment_name (S_GET_SEGMENT (add_symbolP)),
- S_GET_NAME (sub_symbolP),
- segment_name (S_GET_SEGMENT (sub_symbolP)),
- buf);
- }
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = (add_number + fixP->fx_dot_value
+ + fixP->fx_frag->fr_address);
+
+ /* Make it pc-relative. If the back-end code has not
+ selected a pc-relative reloc, cancel the adjustment
+ we do later on all pc-relative relocs. */
+ if (0
+#ifdef TC_M68K
+ /* Do this for m68k even if it's already described
+ as pc-relative. On the m68k, an operand of
+ "pc@(foo-.-2)" should address "foo" in a
+ pc-relative mode. */
+ || 1
+#endif
+ || !fixP->fx_pcrel)
+ add_number += MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_subsy = NULL;
+ fixP->fx_pcrel = 1;
+ }
+ else if (!TC_VALIDATE_FIX_SUB (fixP))
+ {
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("can't resolve `%s' {%s section} - `%s' {%s section}"),
+ fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : "0",
+ segment_name (add_symbol_segment),
+ S_GET_NAME (fixP->fx_subsy),
+ segment_name (sub_symbol_segment));
}
}
- if (add_symbolP)
+ if (fixP->fx_addsy)
{
- if (add_symbol_segment == this_segment_type && pcrel && !plt
- && TC_RELOC_RTSYM_LOC_FIXUP (fixP))
+ if (add_symbol_segment == this_segment
+ && !TC_FORCE_RELOCATION_LOCAL (fixP))
{
/* This fixup was made when the symbol's segment was
SEG_UNKNOWN, but it is now in the local segment.
So we know how to do the address without relocation. */
-#ifdef TC_I960
- /* reloc_callj() may replace a 'call' with a 'calls' or a
- 'bal', in which cases it modifies *fixP as appropriate.
- In the case of a 'calls', no further work is required,
- and *fixP has been set up to make the rest of the code
- below a no-op. */
- reloc_callj (fixP);
-#endif /* TC_I960 */
-
- add_number += S_GET_VALUE (add_symbolP);
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
- /* Lie. Don't want further pcrel processing. */
- pcrel = 0;
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION (fixP))
- {
- fixP->fx_pcrel = 0;
- fixP->fx_addsy = NULL;
- }
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ fixP->fx_offset = add_number;
+ if (fixP->fx_pcrel)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_addsy = NULL;
+ fixP->fx_pcrel = 0;
}
- else
+ else if (add_symbol_segment == absolute_section
+ && !TC_FORCE_RELOCATION_ABS (fixP))
{
- if (add_symbol_segment == absolute_section
- && ! pcrel)
- {
-#ifdef TC_I960
- /* See comment about reloc_callj() above. */
- reloc_callj (fixP);
-#endif /* TC_I960 */
- add_number += S_GET_VALUE (add_symbolP);
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
-
- if (!TC_FORCE_RELOCATION (fixP))
- {
- fixP->fx_addsy = NULL;
- add_symbolP = NULL;
- }
- }
- else if (add_symbol_segment == undefined_section
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ fixP->fx_offset = add_number;
+ fixP->fx_addsy = NULL;
+ }
+ else if (add_symbol_segment != undefined_section
#ifdef BFD_ASSEMBLER
- || bfd_is_com_section (add_symbol_segment)
+ && ! bfd_is_com_section (add_symbol_segment)
#endif
- )
- {
-#ifdef TC_I960
- if ((int) fixP->fx_bit_fixP == 13)
- {
- /* This is a COBR instruction. They have only a
- 13-bit displacement and are only to be used
- for local branches: flag as error, don't generate
- relocation. */
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("can't use COBR format with external label"));
- fixP->fx_addsy = NULL;
- fixP->fx_done = 1;
- continue;
- } /* COBR. */
-#endif /* TC_I960 */
-
-#ifdef OBJ_COFF
-#ifdef TE_I386AIX
- if (S_IS_COMMON (add_symbolP))
- add_number += S_GET_VALUE (add_symbolP);
-#endif /* TE_I386AIX */
-#endif /* OBJ_COFF */
- ++seg_reloc_count;
- }
- else
- {
- seg_reloc_count++;
- if (TC_FIX_ADJUSTABLE (fixP))
- add_number += S_GET_VALUE (add_symbolP);
- }
- }
+ && MD_APPLY_SYM_VALUE (fixP))
+ add_number += S_GET_VALUE (fixP->fx_addsy);
}
- if (pcrel)
+ if (fixP->fx_pcrel)
{
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
- if (add_symbolP == 0)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ if (!fixP->fx_done && fixP->fx_addsy == NULL)
{
-#ifndef BFD_ASSEMBLER
- fixP->fx_addsy = &abs_symbol;
-#else
- fixP->fx_addsy = section_symbol (absolute_section);
-#endif
- symbol_mark_used_in_reloc (fixP->fx_addsy);
- ++seg_reloc_count;
+ /* There was no symbol required by this relocation.
+ However, BFD doesn't really handle relocations
+ without symbols well. So fake up a local symbol in
+ the absolute section. */
+ fixP->fx_addsy = abs_section_sym;
}
}
if (!fixP->fx_done)
- {
-#ifdef MD_APPLY_FIX3
- md_apply_fix3 (fixP, &add_number, this_segment_type);
-#else
-#ifdef BFD_ASSEMBLER
- md_apply_fix (fixP, &add_number);
-#else
- md_apply_fix (fixP, add_number);
-#endif
-#endif
+ md_apply_fix3 (fixP, &add_number, this_segment);
-#ifndef TC_HANDLES_FX_DONE
- /* If the tc-* files haven't been converted, assume it's handling
- it the old way, where a null fx_addsy means that the fix has
- been applied completely, and no further work is needed. */
- if (fixP->fx_addsy == 0 && fixP->fx_pcrel == 0)
- fixP->fx_done = 1;
-#endif
+ if (!fixP->fx_done)
+ {
+ ++seg_reloc_count;
+ if (fixP->fx_addsy == NULL)
+ fixP->fx_addsy = abs_section_sym;
+ symbol_mark_used_in_reloc (fixP->fx_addsy);
+ if (fixP->fx_subsy != NULL)
+ symbol_mark_used_in_reloc (fixP->fx_subsy);
}
- if (!fixP->fx_bit_fixP && !fixP->fx_no_overflow && size > 0)
+ if (!fixP->fx_bit_fixP && !fixP->fx_no_overflow && fixP->fx_size != 0)
{
- if ((size_t) size < sizeof (valueT))
+ if (fixP->fx_size < sizeof (valueT))
{
valueT mask;
mask = 0;
mask--; /* Set all bits to one. */
- mask <<= size * 8 - (fixP->fx_signed ? 1 : 0);
+ mask <<= fixP->fx_size * 8 - (fixP->fx_signed ? 1 : 0);
if ((add_number & mask) != 0 && (add_number & mask) != mask)
{
char buf[50], buf2[50];
- sprint_value (buf, fragP->fr_address + where);
+ sprint_value (buf, fragP->fr_address + fixP->fx_where);
if (add_number > 1000)
sprint_value (buf2, add_number);
else
sprintf (buf2, "%ld", (long) add_number);
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Value of %s too large for field of %d bytes at %s"),
- buf2, size, buf);
+ _("value of %s too large for field of %d bytes at %s"),
+ buf2, fixP->fx_size, buf);
} /* Generic error checking. */
}
#ifdef WARN_SIGNED_OVERFLOW_WORD
number. We already know it is not too negative. This is to
catch over-large switches generated by gcc on the 68k. */
if (!flag_signed_overflow_ok
- && size == 2
+ && fixP->fx_size == 2
&& add_number > 0x7fff)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Signed .word overflow; switch may be too large; %ld at 0x%lx"),
+ _("signed .word overflow; switch may be too large; %ld at 0x%lx"),
(long) add_number,
- (unsigned long) (fragP->fr_address + where));
+ (long) (fragP->fr_address + fixP->fx_where));
#endif
} /* Not a bit fix. */
valueT val;
int n;
{
- if ((size_t) n > sizeof (val) || n <= 0)
+ if (n <= 0)
abort ();
while (n--)
{
valueT val;
int n;
{
- if ((size_t) n > sizeof (val) || n <= 0)
+ if (n <= 0)
abort ();
while (n--)
{