/* write.c - emit .o file
Copyright 1986, 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
/* This thing should be set up to do byteordering correctly. But... */
#include "output-file.h"
#include "dwarf2dbg.h"
-/* This looks like a good idea. Let's try turning it on always, for now. */
-#undef BFD_FAST_SECTION_FILL
-#define BFD_FAST_SECTION_FILL
-
#ifndef TC_ADJUST_RELOC_COUNT
-#define TC_ADJUST_RELOC_COUNT(FIXP,COUNT)
+#define TC_ADJUST_RELOC_COUNT(FIX, COUNT)
#endif
#ifndef TC_FORCE_RELOCATION
-#define TC_FORCE_RELOCATION(FIXP) 0
+#define TC_FORCE_RELOCATION(FIX) \
+ (generic_force_reloc (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_ABS
+#define TC_FORCE_RELOCATION_ABS(FIX) \
+ (TC_FORCE_RELOCATION (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_LOCAL
+#define TC_FORCE_RELOCATION_LOCAL(FIX) \
+ (!(FIX)->fx_pcrel \
+ || (FIX)->fx_plt \
+ || TC_FORCE_RELOCATION (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_SUB_SAME
+#define TC_FORCE_RELOCATION_SUB_SAME(FIX, SEG) \
+ (! SEG_NORMAL (SEG))
#endif
-#ifndef TC_FORCE_RELOCATION_SECTION
-#define TC_FORCE_RELOCATION_SECTION(FIXP,SEG) TC_FORCE_RELOCATION(FIXP)
+#ifndef TC_FORCE_RELOCATION_SUB_ABS
+#define TC_FORCE_RELOCATION_SUB_ABS(FIX) 0
+#endif
+
+#ifndef TC_FORCE_RELOCATION_SUB_LOCAL
+#ifdef DIFF_EXPR_OK
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX) 0
+#else
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX) 1
+#endif
+#endif
+
+#ifndef TC_VALIDATE_FIX_SUB
+#ifdef UNDEFINED_DIFFERENCE_OK
+/* The PA needs this for PIC code generation. */
+#define TC_VALIDATE_FIX_SUB(FIX) 1
+#else
+#define TC_VALIDATE_FIX_SUB(FIX) \
+ ((FIX)->fx_r_type == BFD_RELOC_GPREL32 \
+ || (FIX)->fx_r_type == BFD_RELOC_GPREL16)
+#endif
#endif
#ifndef TC_LINKRELAX_FIXUP
#define TC_LINKRELAX_FIXUP(SEG) 1
#endif
-#ifndef TC_FIX_ADJUSTABLE
-#define TC_FIX_ADJUSTABLE(fix) 1
+#ifndef MD_APPLY_SYM_VALUE
+#define MD_APPLY_SYM_VALUE(FIX) 1
#endif
#ifndef TC_FINALIZE_SYMS_BEFORE_SIZE_SEG
#endif
#ifndef MD_PCREL_FROM_SECTION
-#define MD_PCREL_FROM_SECTION(FIXP, SEC) md_pcrel_from(FIXP)
+#define MD_PCREL_FROM_SECTION(FIX, SEC) md_pcrel_from (FIX)
#endif
-#ifndef WORKING_DOT_WORD
-extern CONST int md_short_jump_size;
-extern CONST int md_long_jump_size;
+#ifndef TC_FAKE_LABEL
+#define TC_FAKE_LABEL(NAME) (strcmp ((NAME), FAKE_LABEL_NAME) == 0)
#endif
/* Used to control final evaluation of expressions. */
int finalize_syms = 0;
int symbol_table_frozen;
-void print_fixup PARAMS ((fixS *));
-#ifdef BFD_ASSEMBLER
-static void renumber_sections PARAMS ((bfd *, asection *, PTR));
+symbolS *abs_section_sym;
+
+/* Remember the value of dot when parsing expressions. */
+addressT dot_value;
+
+void print_fixup (fixS *);
+
+static void renumber_sections (bfd *, asection *, PTR);
/* We generally attach relocs to frag chains. However, after we have
chained these all together into a segment, any relocs we add after
that must be attached to a segment. This will include relocs added
in md_estimate_size_for_relax, for example. */
static int frags_chained = 0;
-#endif
-
-#ifndef BFD_ASSEMBLER
-
-#ifndef MANY_SEGMENTS
-struct frag *text_frag_root;
-struct frag *data_frag_root;
-struct frag *bss_frag_root;
-
-struct frag *text_last_frag; /* Last frag in segment. */
-struct frag *data_last_frag; /* Last frag in segment. */
-static struct frag *bss_last_frag; /* Last frag in segment. */
-#endif
-
-#ifndef BFD
-static object_headers headers;
-#endif
-
-long string_byte_count;
-char *next_object_file_charP; /* Tracks object file bytes. */
-
-#ifndef OBJ_VMS
-int magic_number_for_object_file = DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE;
-#endif
-
-#endif /* BFD_ASSEMBLER */
static int n_fixups;
-#ifdef BFD_ASSEMBLER
-static fixS *fix_new_internal PARAMS ((fragS *, int where, int size,
- symbolS *add, symbolS *sub,
- offsetT offset, int pcrel,
- bfd_reloc_code_real_type r_type));
-#else
-static fixS *fix_new_internal PARAMS ((fragS *, int where, int size,
- symbolS *add, symbolS *sub,
- offsetT offset, int pcrel,
- int r_type));
-#endif
-#if defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS))
-static long fixup_segment PARAMS ((fixS * fixP, segT this_segment_type));
-#endif
-static relax_addressT relax_align PARAMS ((relax_addressT addr, int align));
-#if defined (BFD_ASSEMBLER) || ! defined (BFD)
-static fragS *chain_frchains_together_1 PARAMS ((segT, struct frchain *));
-#endif
-#ifdef BFD_ASSEMBLER
-static void chain_frchains_together PARAMS ((bfd *, segT, PTR));
-static void cvt_frag_to_fill PARAMS ((segT, fragS *));
-static void adjust_reloc_syms PARAMS ((bfd *, asection *, PTR));
-static void write_relocs PARAMS ((bfd *, asection *, PTR));
-static void write_contents PARAMS ((bfd *, asection *, PTR));
-static void set_symtab PARAMS ((void));
-#endif
-#if defined (BFD_ASSEMBLER) || (! defined (BFD) && ! defined (OBJ_AOUT))
-static void merge_data_into_text PARAMS ((void));
-#endif
-#if ! defined (BFD_ASSEMBLER) && ! defined (BFD)
-static void cvt_frag_to_fill PARAMS ((object_headers *, segT, fragS *));
-static void remove_subsegs PARAMS ((frchainS *, int, fragS **, fragS **));
-static void relax_and_size_all_segments PARAMS ((void));
-#endif
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
-static void set_segment_vma PARAMS ((bfd *, asection *, PTR));
-#endif
+#define RELOC_ENUM enum bfd_reloc_code_real
+
+static fixS *fix_new_internal (fragS *, int where, int size,
+ symbolS *add, symbolS *sub,
+ offsetT offset, int pcrel,
+ RELOC_ENUM r_type);
+static long fixup_segment (fixS *, segT);
+static relax_addressT relax_align (relax_addressT addr, int align);
+static fragS *chain_frchains_together_1 (segT, struct frchain *);
+static void chain_frchains_together (bfd *, segT, PTR);
+static void cvt_frag_to_fill (segT, fragS *);
+static void adjust_reloc_syms (bfd *, asection *, PTR);
+static void fix_segment (bfd *, asection *, PTR);
+static void write_relocs (bfd *, asection *, PTR);
+static void write_contents (bfd *, asection *, PTR);
+static void set_symtab (void);
+static void merge_data_into_text (void);
/* Create a fixS in obstack 'notes'. */
static fixS *
-fix_new_internal (frag, where, size, add_symbol, sub_symbol, offset, pcrel,
- r_type)
- fragS *frag; /* Which frag? */
- int where; /* Where in that frag? */
- int size; /* 1, 2, or 4 usually. */
- symbolS *add_symbol; /* X_add_symbol. */
- symbolS *sub_symbol; /* X_op_symbol. */
- offsetT offset; /* X_add_number. */
- int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+fix_new_internal (fragS *frag, /* Which frag? */
+ int where, /* Where in that frag? */
+ int size, /* 1, 2, or 4 usually. */
+ symbolS *add_symbol, /* X_add_symbol. */
+ symbolS *sub_symbol, /* X_op_symbol. */
+ offsetT offset, /* X_add_number. */
+ int pcrel, /* TRUE if PC-relative relocation. */
+ RELOC_ENUM r_type ATTRIBUTE_UNUSED /* Relocation type. */)
{
fixS *fixP;
fixP->fx_addsy = add_symbol;
fixP->fx_subsy = sub_symbol;
fixP->fx_offset = offset;
+ fixP->fx_dot_value = dot_value;
fixP->fx_pcrel = pcrel;
fixP->fx_plt = 0;
-#if defined(NEED_FX_R_TYPE) || defined (BFD_ASSEMBLER)
fixP->fx_r_type = r_type;
-#endif
fixP->fx_im_disp = 0;
fixP->fx_pcrel_adjust = 0;
fixP->fx_bit_fixP = 0;
time option. xoxorich. */
{
-#ifdef BFD_ASSEMBLER
fixS **seg_fix_rootP = (frags_chained
? &seg_info (now_seg)->fix_root
: &frchain_now->fix_root);
fixS **seg_fix_tailP = (frags_chained
? &seg_info (now_seg)->fix_tail
: &frchain_now->fix_tail);
-#endif
#ifdef REVERSE_SORT_RELOCS
/* Create a fixup relative to a symbol (plus a constant). */
fixS *
-fix_new (frag, where, size, add_symbol, offset, pcrel, r_type)
- fragS *frag; /* Which frag? */
- int where; /* Where in that frag? */
- int size; /* 1, 2, or 4 usually. */
- symbolS *add_symbol; /* X_add_symbol. */
- offsetT offset; /* X_add_number. */
- int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+fix_new (fragS *frag, /* Which frag? */
+ int where, /* Where in that frag? */
+ int size, /* 1, 2, or 4 usually. */
+ symbolS *add_symbol, /* X_add_symbol. */
+ offsetT offset, /* X_add_number. */
+ int pcrel, /* TRUE if PC-relative relocation. */
+ RELOC_ENUM r_type /* Relocation type. */)
{
return fix_new_internal (frag, where, size, add_symbol,
(symbolS *) NULL, offset, pcrel, r_type);
file formats support anyhow. */
fixS *
-fix_new_exp (frag, where, size, exp, pcrel, r_type)
- fragS *frag; /* Which frag? */
- int where; /* Where in that frag? */
- int size; /* 1, 2, or 4 usually. */
- expressionS *exp; /* Expression. */
- int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+fix_new_exp (fragS *frag, /* Which frag? */
+ int where, /* Where in that frag? */
+ int size, /* 1, 2, or 4 usually. */
+ expressionS *exp, /* Expression. */
+ int pcrel, /* TRUE if PC-relative relocation. */
+ RELOC_ENUM r_type /* Relocation type. */)
{
symbolS *add = NULL;
symbolS *sub = NULL;
case O_symbol_rva:
add = exp->X_add_symbol;
off = exp->X_add_number;
-
-#if defined(BFD_ASSEMBLER)
r_type = BFD_RELOC_RVA;
-#else
-#if defined(TC_RVA_RELOC)
- r_type = TC_RVA_RELOC;
-#else
- as_fatal (_("rva not supported"));
-#endif
-#endif
break;
case O_uminus:
return fix_new_internal (frag, where, size, add, sub, off, pcrel, r_type);
}
+/* Generic function to determine whether a fixup requires a relocation. */
+int
+generic_force_reloc (fixS *fix)
+{
+ if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 1;
+
+ if (fix->fx_addsy == NULL)
+ return 0;
+
+ return S_FORCE_RELOC (fix->fx_addsy, fix->fx_subsy == NULL);
+}
+
/* Append a string onto another string, bumping the pointer along. */
void
-append (charPP, fromP, length)
- char **charPP;
- char *fromP;
- unsigned long length;
+append (char **charPP, char *fromP, unsigned long length)
{
/* Don't trust memcpy() of 0 chars. */
if (length == 0)
*charPP += length;
}
-#ifndef BFD_ASSEMBLER
-int section_alignment[SEG_MAXIMUM_ORDINAL];
-#endif
-
/* This routine records the largest alignment seen for each segment.
If the beginning of the segment is aligned on the worst-case
boundary, all of the other alignments within it will work. At
least one object format really uses this info. */
void
-record_alignment (seg, align)
- /* Segment to which alignment pertains. */
- segT seg;
- /* Alignment, as a power of 2 (e.g., 1 => 2-byte boundary, 2 => 4-byte
- boundary, etc.) */
- int align;
+record_alignment (/* Segment to which alignment pertains. */
+ segT seg,
+ /* Alignment, as a power of 2 (e.g., 1 => 2-byte
+ boundary, 2 => 4-byte boundary, etc.) */
+ int align)
{
if (seg == absolute_section)
return;
-#ifdef BFD_ASSEMBLER
+
if ((unsigned int) align > bfd_get_section_alignment (stdoutput, seg))
bfd_set_section_alignment (stdoutput, seg, align);
-#else
- if (align > section_alignment[(int) seg])
- section_alignment[(int) seg] = align;
-#endif
}
int
-get_recorded_alignment (seg)
- segT seg;
+get_recorded_alignment (segT seg)
{
if (seg == absolute_section)
return 0;
-#ifdef BFD_ASSEMBLER
+
return bfd_get_section_alignment (stdoutput, seg);
-#else
- return section_alignment[(int) seg];
-#endif
}
-#ifdef BFD_ASSEMBLER
-
/* Reset the section indices after removing the gas created sections. */
static void
-renumber_sections (abfd, sec, countparg)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *sec;
- PTR countparg;
+renumber_sections (bfd *abfd ATTRIBUTE_UNUSED, asection *sec, PTR countparg)
{
int *countp = (int *) countparg;
++*countp;
}
-#endif /* defined (BFD_ASSEMBLER) */
-
-#if defined (BFD_ASSEMBLER) || ! defined (BFD)
-
static fragS *
-chain_frchains_together_1 (section, frchp)
- segT section;
- struct frchain *frchp;
+chain_frchains_together_1 (segT section, struct frchain *frchp)
{
fragS dummy, *prev_frag = &dummy;
-#ifdef BFD_ASSEMBLER
fixS fix_dummy, *prev_fix = &fix_dummy;
-#endif
for (; frchp && frchp->frch_seg == section; frchp = frchp->frch_next)
{
prev_frag->fr_next = frchp->frch_root;
prev_frag = frchp->frch_last;
assert (prev_frag->fr_type != 0);
-#ifdef BFD_ASSEMBLER
if (frchp->fix_root != (fixS *) NULL)
{
if (seg_info (section)->fix_root == (fixS *) NULL)
seg_info (section)->fix_tail = frchp->fix_tail;
prev_fix = frchp->fix_tail;
}
-#endif
}
assert (prev_frag->fr_type != 0);
prev_frag->fr_next = 0;
return prev_frag;
}
-#endif
-
-#ifdef BFD_ASSEMBLER
-
static void
-chain_frchains_together (abfd, section, xxx)
- bfd *abfd ATTRIBUTE_UNUSED;
- segT section;
- PTR xxx ATTRIBUTE_UNUSED;
+chain_frchains_together (bfd *abfd ATTRIBUTE_UNUSED,
+ segT section,
+ PTR xxx ATTRIBUTE_UNUSED)
{
segment_info_type *info;
frags_chained = 1;
}
-#endif
-
-#if !defined (BFD) && !defined (BFD_ASSEMBLER)
-
-static void
-remove_subsegs (head, seg, root, last)
- frchainS *head;
- int seg;
- fragS **root;
- fragS **last;
-{
- *root = head->frch_root;
- *last = chain_frchains_together_1 (seg, head);
-}
-
-#endif /* BFD */
-
-#if defined (BFD_ASSEMBLER) || !defined (BFD)
-
-#ifdef BFD_ASSEMBLER
-static void
-cvt_frag_to_fill (sec, fragP)
- segT sec ATTRIBUTE_UNUSED;
- fragS *fragP;
-#else
static void
-cvt_frag_to_fill (headersP, sec, fragP)
- object_headers *headersP;
- segT sec;
- fragS *fragP;
-#endif
+cvt_frag_to_fill (segT sec ATTRIBUTE_UNUSED, fragS *fragP)
{
switch (fragP->fr_type)
{
as_bad_where (fragP->fr_file, fragP->fr_line,
_("attempt to .org/.space backwards? (%ld)"),
(long) fragP->fr_offset);
+ fragP->fr_offset = 0;
}
fragP->fr_type = rs_fill;
break;
break;
case rs_machine_dependent:
-#ifdef BFD_ASSEMBLER
md_convert_frag (stdoutput, sec, fragP);
-#else
- md_convert_frag (headersP, sec, fragP);
-#endif
assert (fragP->fr_next == NULL
|| ((offsetT) (fragP->fr_next->fr_address - fragP->fr_address)
BAD_CASE (fragP->fr_type);
break;
}
+#ifdef md_frag_check
+ md_frag_check (fragP);
+#endif
}
-#endif /* defined (BFD_ASSEMBLER) || !defined (BFD) */
+static void relax_seg (bfd *, asection *, PTR);
-#ifdef BFD_ASSEMBLER
-static void relax_seg PARAMS ((bfd *, asection *, PTR));
static void
-relax_seg (abfd, sec, xxx)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *sec;
- PTR xxx;
+relax_seg (bfd *abfd ATTRIBUTE_UNUSED, asection *sec, PTR xxx)
{
segment_info_type *seginfo = seg_info (sec);
}
}
-static void size_seg PARAMS ((bfd *, asection *, PTR));
+static void size_seg (bfd *, asection *, PTR);
+
static void
-size_seg (abfd, sec, xxx)
- bfd *abfd;
- asection *sec;
- PTR xxx ATTRIBUTE_UNUSED;
+size_seg (bfd *abfd, asection *sec, PTR xxx ATTRIBUTE_UNUSED)
{
flagword flags;
fragS *fragp;
else
flags &= ~SEC_RELOC;
x = bfd_set_section_flags (abfd, sec, flags);
- assert (x == true);
+ assert (x);
newsize = md_section_align (sec, size);
x = bfd_set_section_size (abfd, sec, newsize);
- assert (x == true);
+ assert (x);
/* If the size had to be rounded up, add some padding in the last
non-empty frag. */
while (fragp->fr_next != last)
fragp = fragp->fr_next;
last->fr_address = size;
- fragp->fr_offset += newsize - size;
+ if ((newsize - size) % fragp->fr_var == 0)
+ fragp->fr_offset += (newsize - size) / fragp->fr_var;
+ else
+ /* If we hit this abort, it's likely due to subsegs_finish not
+ providing sufficient alignment on the last frag, and the
+ machine dependent code using alignment frags with fr_var
+ greater than 1. */
+ abort ();
}
#ifdef tc_frob_section
#ifdef DEBUG2
static void
-dump_section_relocs (abfd, sec, stream_)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *sec;
- char *stream_;
+dump_section_relocs (bfd *abfd ATTRIBUTE_UNUSED, asection *sec, FILE *stream)
{
- FILE *stream = (FILE *) stream_;
segment_info_type *seginfo = seg_info (sec);
fixS *fixp = seginfo->fix_root;
#define EMIT_SECTION_SYMBOLS 1
#endif
+/* This pass over fixups decides whether symbols can be replaced with
+ section symbols. */
+
static void
-adjust_reloc_syms (abfd, sec, xxx)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *sec;
- PTR xxx ATTRIBUTE_UNUSED;
+adjust_reloc_syms (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec,
+ PTR xxx ATTRIBUTE_UNUSED)
{
segment_info_type *seginfo = seg_info (sec);
fixS *fixp;
point. It is possible to see unresolved expression
symbols, though, since they are not in the regular symbol
table. */
- if (sym != NULL)
- resolve_symbol_value (sym);
+ resolve_symbol_value (sym);
if (fixp->fx_subsy != NULL)
resolve_symbol_value (fixp->fx_subsy);
- /* If this symbol is equated to an undefined symbol, convert
- the fixup to being against that symbol. */
- if (sym != NULL && symbol_equated_reloc_p (sym))
+ /* If this symbol is equated to an undefined or common symbol,
+ convert the fixup to being against that symbol. */
+ if (symbol_equated_reloc_p (sym))
{
+ symbolS *new_sym
+ = symbol_get_value_expression (sym)->X_add_symbol;
+ const char *name = S_GET_NAME (sym);
+ if (!S_IS_COMMON (new_sym)
+ && !TC_FAKE_LABEL (name)
+ && (!S_IS_EXTERNAL (sym) || S_IS_LOCAL (sym)))
+ as_bad (_("Local symbol `%s' can't be equated to undefined symbol `%s'"),
+ name, S_GET_NAME (new_sym));
fixp->fx_offset += symbol_get_value_expression (sym)->X_add_number;
- sym = symbol_get_value_expression (sym)->X_add_symbol;
+ sym = new_sym;
fixp->fx_addsy = sym;
}
- if (sym != NULL && symbol_mri_common_p (sym))
+ if (symbol_mri_common_p (sym))
{
/* These symbols are handled specially in fixup_segment. */
- goto done;
+ continue;
}
- symsec = S_GET_SEGMENT (sym);
+ /* If the symbol is undefined, common, weak, or global (ELF
+ shared libs), we can't replace it with the section symbol. */
+ if (S_FORCE_RELOC (fixp->fx_addsy, 1))
+ continue;
+ /* Is there some other (target cpu dependent) reason we can't adjust
+ this one? (E.g. relocations involving function addresses on
+ the PA. */
+#ifdef tc_fix_adjustable
+ if (! tc_fix_adjustable (fixp))
+ continue;
+#endif
+
+ /* Since we're reducing to section symbols, don't attempt to reduce
+ anything that's already using one. */
+ if (symbol_section_p (sym))
+ continue;
+
+ symsec = S_GET_SEGMENT (sym);
if (symsec == NULL)
abort ();
if (bfd_is_abs_section (symsec))
{
- /* The fixup_segment routine will not use this symbol in a
- relocation unless TC_FORCE_RELOCATION returns 1. */
- if (TC_FORCE_RELOCATION (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- if (fixp->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- }
- goto done;
- }
-
- /* If it's one of these sections, assume the symbol is
- definitely going to be output. The code in
- md_estimate_size_before_relax in tc-mips.c uses this test
- as well, so if you change this code you should look at that
- code. */
- if (bfd_is_und_section (symsec)
- || bfd_is_com_section (symsec))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- /* We have the difference of an undefined symbol and some
- other symbol. Make sure to mark the other symbol as used
- in a relocation so that it will always be output. */
- if (fixp->fx_subsy)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- goto done;
+ /* The fixup_segment routine normally will not use this
+ symbol in a relocation. */
+ continue;
}
/* Don't try to reduce relocs which refer to non-local symbols
this will always be correct. */
if (symsec != sec && ! S_IS_LOCAL (sym))
{
- boolean linkonce;
-
- linkonce = false;
-#ifdef BFD_ASSEMBLER
- if ((bfd_get_section_flags (stdoutput, symsec) & SEC_LINK_ONCE)
- != 0)
- linkonce = true;
-#endif
-#ifdef OBJ_ELF
- /* The GNU toolchain uses an extension for ELF: a section
- beginning with the magic string .gnu.linkonce is a
- linkonce section. */
- if (strncmp (segment_name (symsec), ".gnu.linkonce",
- sizeof ".gnu.linkonce" - 1) == 0)
- linkonce = true;
-#endif
-
- if (linkonce)
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- if (fixp->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- goto done;
- }
- }
-
- /* Since we're reducing to section symbols, don't attempt to reduce
- anything that's already using one. */
- if (symbol_section_p (sym))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-
-#ifdef BFD_ASSEMBLER
- /* We can never adjust a reloc against a weak symbol. If we
- did, and the weak symbol was overridden by a real symbol
- somewhere else, then our relocation would be pointing at
- the wrong area of memory. */
- if (S_IS_WEAK (sym))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
+ if ((symsec->flags & SEC_LINK_ONCE) != 0
+ || (IS_ELF
+ /* The GNU toolchain uses an extension for ELF: a
+ section beginning with the magic string
+ .gnu.linkonce is a linkonce section. */
+ && strncmp (segment_name (symsec), ".gnu.linkonce",
+ sizeof ".gnu.linkonce" - 1) == 0))
+ continue;
}
/* Never adjust a reloc against local symbol in a merge section
with non-zero addend. */
- if ((symsec->flags & SEC_MERGE) && fixp->fx_offset)
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
-
- /* Is there some other reason we can't adjust this one? (E.g.,
- call/bal links in i960-bout symbols.) */
-#ifdef obj_fix_adjustable
- if (! obj_fix_adjustable (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
-
- /* Is there some other (target cpu dependent) reason we can't adjust
- this one? (E.g. relocations involving function addresses on
- the PA. */
-#ifdef tc_fix_adjustable
- if (! tc_fix_adjustable (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
+ if ((symsec->flags & SEC_MERGE) != 0
+ && (fixp->fx_offset != 0 || fixp->fx_subsy != NULL))
+ continue;
- /* If the section symbol isn't going to be output, the relocs
- at least should still work. If not, figure out what to do
- when we run into that case.
+ /* Never adjust a reloc against TLS local symbol. */
+ if ((symsec->flags & SEC_THREAD_LOCAL) != 0)
+ continue;
- We refetch the segment when calling section_symbol, rather
+ /* We refetch the segment when calling section_symbol, rather
than using symsec, because S_GET_VALUE may wind up changing
the section when it calls resolve_symbol_value. */
fixp->fx_offset += S_GET_VALUE (sym);
fixp->fx_addsy = section_symbol (S_GET_SEGMENT (sym));
- symbol_mark_used_in_reloc (fixp->fx_addsy);
#ifdef DEBUG5
fprintf (stderr, "\nadjusted fixup:\n");
print_fixup (fixp);
#endif
-
- done:
- ;
- }
-#if 1 /* def RELOC_REQUIRES_SYMBOL */
- else
- {
- /* There was no symbol required by this relocation. However,
- BFD doesn't really handle relocations without symbols well.
- (At least, the COFF support doesn't.) So for now we fake up
- a local symbol in the absolute section. */
-
- fixp->fx_addsy = section_symbol (absolute_section);
-#if 0
- fixp->fx_addsy->sy_used_in_reloc = 1;
-#endif
}
-#endif
dump_section_relocs (abfd, sec, stderr);
}
static void
-write_relocs (abfd, sec, xxx)
- bfd *abfd;
- asection *sec;
- PTR xxx ATTRIBUTE_UNUSED;
+fix_segment (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec,
+ PTR xxx ATTRIBUTE_UNUSED)
+{
+ segment_info_type *seginfo = seg_info (sec);
+
+ fixup_segment (seginfo->fix_root, sec);
+}
+
+static void
+write_relocs (bfd *abfd, asection *sec, PTR xxx ATTRIBUTE_UNUSED)
{
segment_info_type *seginfo = seg_info (sec);
unsigned int i;
if (seginfo == NULL)
return;
- fixup_segment (seginfo->fix_root, sec);
-
n = 0;
for (fixp = seginfo->fix_root; fixp; fixp = fixp->fx_next)
n++;
#ifndef RELOC_EXPANSION_POSSIBLE
/* Set up reloc information as well. */
- relocs = (arelent **) xmalloc (n * sizeof (arelent *));
- memset ((char *) relocs, 0, n * sizeof (arelent *));
+ relocs = (arelent **) xcalloc (n, sizeof (arelent *));
i = 0;
for (fixp = seginfo->fix_root; fixp != (fixS *) NULL; fixp = fixp->fx_next)
continue;
}
-#if 0
- /* This test is triggered inappropriately for the SH. */
- if (fixp->fx_where + fixp->fx_size
- > fixp->fx_frag->fr_fix + fixp->fx_frag->fr_offset)
- abort ();
-#endif
+ /*
+ This test is triggered inappropriately for the SH:
+ if (fixp->fx_where + fixp->fx_size
+ > fixp->fx_frag->fr_fix + fixp->fx_frag->fr_offset)
+ abort ();
+ */
s = bfd_install_relocation (stdoutput, reloc,
fixp->fx_frag->fr_literal,
case bfd_reloc_ok:
break;
case bfd_reloc_overflow:
- as_bad_where (fixp->fx_file, fixp->fx_line, _("relocation overflow"));
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation overflow"));
break;
case bfd_reloc_outofrange:
- as_bad_where (fixp->fx_file, fixp->fx_line, _("relocation out of range"));
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation out of range"));
break;
default:
as_fatal (_("%s:%u: bad return from bfd_install_relocation: %x"),
#else
n = n * MAX_RELOC_EXPANSION;
/* Set up reloc information as well. */
- relocs = (arelent **) xmalloc (n * sizeof (arelent *));
+ relocs = (arelent **) xcalloc (n, sizeof (arelent *));
i = 0;
for (fixp = seginfo->fix_root; fixp != (fixS *) NULL; fixp = fixp->fx_next)
{
arelent **reloc;
- char *data;
bfd_reloc_status_type s;
symbolS *sym;
int j;
rather than the former. */
sym = fixp->fx_addsy;
while (symbol_equated_reloc_p (sym))
- sym = symbol_get_value_expression (sym)->X_add_symbol;
+ {
+ symbolS *n;
+
+ /* We must avoid looping, as that can occur with a badly
+ written program. */
+ n = symbol_get_value_expression (sym)->X_add_symbol;
+ if (n == sym)
+ break;
+ fixp->fx_offset += symbol_get_value_expression (sym)->X_add_number;
+ sym = n;
+ }
fixp->fx_addsy = sym;
reloc = tc_gen_reloc (sec, fixp);
relocs[i++] = reloc[j];
assert (i <= n);
}
- data = fixp->fx_frag->fr_literal + fixp->fx_where;
if (fixp->fx_where + fixp->fx_size
> fixp->fx_frag->fr_fix + fixp->fx_frag->fr_offset)
as_bad_where (fixp->fx_file, fixp->fx_line,
as_bad_where (fixp->fx_file, fixp->fx_line,
_("relocation overflow"));
break;
+ case bfd_reloc_outofrange:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation out of range"));
+ break;
default:
- as_fatal (_("%s:%u: bad return from bfd_install_relocation"),
- fixp->fx_file, fixp->fx_line);
+ as_fatal (_("%s:%u: bad return from bfd_install_relocation: %x"),
+ fixp->fx_file, fixp->fx_line, s);
}
}
}
#ifdef DEBUG4
{
- int i, j, nsyms;
+ unsigned int i, j, nsyms;
asymbol **sympp;
sympp = bfd_get_outsymbols (stdoutput);
nsyms = bfd_get_symcount (stdoutput);
#ifdef DEBUG3
{
- int i;
+ unsigned int i;
arelent *r;
asymbol *s;
fprintf (stderr, "relocs for sec %s\n", sec->name);
{
r = relocs[i];
s = *r->sym_ptr_ptr;
- fprintf (stderr, " reloc %2d @%08x off %4x : sym %-10s addend %x\n",
- i, r, r->address, s->name, r->addend);
+ fprintf (stderr, " reloc %2d @%p off %4lx : sym %-10s addend %lx\n",
+ i, r, (unsigned long)r->address, s->name, (unsigned long)r->addend);
}
}
#endif
}
static void
-write_contents (abfd, sec, xxx)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *sec;
- PTR xxx ATTRIBUTE_UNUSED;
+write_contents (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec,
+ PTR xxx ATTRIBUTE_UNUSED)
{
segment_info_type *seginfo = seg_info (sec);
- unsigned long offset = 0;
+ addressT offset = 0;
fragS *f;
/* Write out the frags. */
f = f->fr_next)
{
int x;
- unsigned long fill_size;
+ addressT fill_size;
char *fill_literal;
- long count;
+ offsetT count;
assert (f->fr_type == rs_fill);
if (f->fr_fix)
x = bfd_set_section_contents (stdoutput, sec,
f->fr_literal, (file_ptr) offset,
(bfd_size_type) f->fr_fix);
- if (x == false)
+ if (!x)
{
bfd_perror (stdoutput->filename);
as_perror (_("FATAL: Can't write %s"), stdoutput->filename);
fill_literal,
(file_ptr) offset,
(bfd_size_type) fill_size);
- if (x == false)
+ if (!x)
{
bfd_perror (stdoutput->filename);
as_perror (_("FATAL: Can't write %s"),
x = bfd_set_section_contents
(stdoutput, sec, buf, (file_ptr) offset,
(bfd_size_type) n_per_buf * fill_size);
- if (x != true)
+ if (!x)
as_fatal (_("cannot write to output file"));
offset += n_per_buf * fill_size;
}
}
}
}
-#endif
-#if defined(BFD_ASSEMBLER) || (!defined (BFD) && !defined(OBJ_AOUT))
static void
-merge_data_into_text ()
+merge_data_into_text (void)
{
-#if defined(BFD_ASSEMBLER) || defined(MANY_SEGMENTS)
seg_info (text_section)->frchainP->frch_last->fr_next =
seg_info (data_section)->frchainP->frch_root;
seg_info (text_section)->frchainP->frch_last =
seg_info (data_section)->frchainP->frch_last;
seg_info (data_section)->frchainP = 0;
-#else
- fixS *tmp;
-
- text_last_frag->fr_next = data_frag_root;
- text_last_frag = data_last_frag;
- data_last_frag = NULL;
- data_frag_root = NULL;
- if (text_fix_root)
- {
- for (tmp = text_fix_root; tmp->fx_next; tmp = tmp->fx_next);;
- tmp->fx_next = data_fix_root;
- text_fix_tail = data_fix_tail;
- }
- else
- text_fix_root = data_fix_root;
- data_fix_root = NULL;
-#endif
}
-#endif /* BFD_ASSEMBLER || (! BFD && ! OBJ_AOUT) */
-#if !defined (BFD_ASSEMBLER) && !defined (BFD)
static void
-relax_and_size_all_segments ()
-{
- fragS *fragP;
-
- relax_segment (text_frag_root, SEG_TEXT);
- relax_segment (data_frag_root, SEG_DATA);
- relax_segment (bss_frag_root, SEG_BSS);
-
- /* Now the addresses of frags are correct within the segment. */
- know (text_last_frag->fr_type == rs_fill && text_last_frag->fr_offset == 0);
- H_SET_TEXT_SIZE (&headers, text_last_frag->fr_address);
- text_last_frag->fr_address = H_GET_TEXT_SIZE (&headers);
-
- /* Join the 2 segments into 1 huge segment.
- To do this, re-compute every rn_address in the SEG_DATA frags.
- Then join the data frags after the text frags.
-
- Determine a_data [length of data segment]. */
- if (data_frag_root)
- {
- register relax_addressT slide;
-
- know ((text_last_frag->fr_type == rs_fill)
- && (text_last_frag->fr_offset == 0));
-
- H_SET_DATA_SIZE (&headers, data_last_frag->fr_address);
- data_last_frag->fr_address = H_GET_DATA_SIZE (&headers);
- slide = H_GET_TEXT_SIZE (&headers); /* & in file of the data segment. */
-#ifdef OBJ_BOUT
-#define RoundUp(N,S) (((N)+(S)-1)&-(S))
- /* For b.out: If the data section has a strict alignment
- requirement, its load address in the .o file will be
- rounded up from the size of the text section. These
- two values are *not* the same! Similarly for the bss
- section.... */
- slide = RoundUp (slide, 1 << section_alignment[SEG_DATA]);
-#endif
-
- for (fragP = data_frag_root; fragP; fragP = fragP->fr_next)
- fragP->fr_address += slide;
-
- know (text_last_frag != 0);
- text_last_frag->fr_next = data_frag_root;
- }
- else
- {
- H_SET_DATA_SIZE (&headers, 0);
- }
-
-#ifdef OBJ_BOUT
- /* See above comments on b.out data section address. */
- {
- long bss_vma;
- if (data_last_frag == 0)
- bss_vma = H_GET_TEXT_SIZE (&headers);
- else
- bss_vma = data_last_frag->fr_address;
- bss_vma = RoundUp (bss_vma, 1 << section_alignment[SEG_BSS]);
- bss_address_frag.fr_address = bss_vma;
- }
-#else /* ! OBJ_BOUT */
- bss_address_frag.fr_address = (H_GET_TEXT_SIZE (&headers) +
- H_GET_DATA_SIZE (&headers));
-
-#endif /* ! OBJ_BOUT */
-
- /* Slide all the frags. */
- if (bss_frag_root)
- {
- relax_addressT slide = bss_address_frag.fr_address;
-
- for (fragP = bss_frag_root; fragP; fragP = fragP->fr_next)
- fragP->fr_address += slide;
- }
-
- if (bss_last_frag)
- H_SET_BSS_SIZE (&headers,
- bss_last_frag->fr_address - bss_frag_root->fr_address);
- else
- H_SET_BSS_SIZE (&headers, 0);
-}
-#endif /* ! BFD_ASSEMBLER && ! BFD */
-
-#if defined (BFD_ASSEMBLER) || !defined (BFD)
-
-#ifdef BFD_ASSEMBLER
-static void
-set_symtab ()
+set_symtab (void)
{
int nsyms;
asymbol **asympp;
symbolS *symp;
- boolean result;
- extern PTR bfd_alloc PARAMS ((bfd *, bfd_size_type));
+ bfd_boolean result;
+ extern PTR bfd_alloc (bfd *, bfd_size_type);
/* Count symbols. We can't rely on a count made by the loop in
write_object_file, because *_frob_file may add a new symbol or
else
asympp = 0;
result = bfd_set_symtab (stdoutput, asympp, nsyms);
- assert (result == true);
+ assert (result);
symbol_table_frozen = 1;
}
-#endif
-
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
-static void
-set_segment_vma (abfd, sec, xxx)
- bfd *abfd;
- asection *sec;
- PTR xxx ATTRIBUTE_UNUSED;
-{
- static bfd_vma addr = 0;
-
- bfd_set_section_vma (abfd, sec, addr);
- addr += bfd_section_size (abfd, sec);
-}
-#endif /* BFD_ASSEMBLER && OBJ_COFF && !TE_PE */
/* Finish the subsegments. After every sub-segment, we fake an
".align ...". This conforms to BSD4.2 brane-damage. We then fake
makes calculating their intended length trivial. */
#ifndef SUB_SEGMENT_ALIGN
-#ifdef BFD_ASSEMBLER
-#define SUB_SEGMENT_ALIGN(SEG) (0)
+#ifdef HANDLE_ALIGN
+/* The last subsegment gets an alignment corresponding to the alignment
+ of the section. This allows proper nop-filling at the end of
+ code-bearing sections. */
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) \
+ (!(FRCHAIN)->frch_next || (FRCHAIN)->frch_next->frch_seg != (SEG) \
+ ? get_recorded_alignment (SEG) : 0)
#else
-#define SUB_SEGMENT_ALIGN(SEG) (2)
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 0
#endif
#endif
void
-subsegs_finish ()
+subsegs_finish (void)
{
struct frchain *frchainP;
for (frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next)
{
- int alignment;
+ int alignment = 0;
subseg_set (frchainP->frch_seg, frchainP->frch_subseg);
/* This now gets called even if we had errors. In that case,
any alignment is meaningless, and, moreover, will look weird
if we are generating a listing. */
- alignment = had_errors () ? 0 : SUB_SEGMENT_ALIGN (now_seg);
+ if (!had_errors ())
+ {
+ alignment = SUB_SEGMENT_ALIGN (now_seg, frchainP);
+ if ((bfd_get_section_flags (now_seg->owner, now_seg) & SEC_MERGE)
+ && now_seg->entsize)
+ {
+ unsigned int entsize = now_seg->entsize;
+ int entalign = 0;
- /* The last subsegment gets an aligment corresponding to the
- alignment of the section. This allows proper nop-filling
- at the end of code-bearing sections. */
- if (!frchainP->frch_next || frchainP->frch_next->frch_seg != now_seg)
- alignment = get_recorded_alignment (now_seg);
+ while ((entsize & 1) == 0)
+ {
+ ++entalign;
+ entsize >>= 1;
+ }
+ if (entalign > alignment)
+ alignment = entalign;
+ }
+ }
if (subseg_text_p (now_seg))
frag_align_code (alignment, 0);
/* Write the object file. */
void
-write_object_file ()
+write_object_file (void)
{
-#if ! defined (BFD_ASSEMBLER) || ! defined (WORKING_DOT_WORD)
+#ifndef WORKING_DOT_WORD
fragS *fragP; /* Track along all frags. */
#endif
/* From now on, we don't care about sub-segments. Build one frag chain
for each segment. Linked thru fr_next. */
-#ifdef BFD_ASSEMBLER
/* Remove the sections created by gas for its own purposes. */
{
- asection **seclist;
int i;
- seclist = &stdoutput->sections;
- while (*seclist)
- {
- if (*seclist == reg_section || *seclist == expr_section)
- {
- bfd_section_list_remove (stdoutput, seclist);
- stdoutput->section_count--;
- }
- else
- seclist = &(*seclist)->next;
- }
+ bfd_section_list_remove (stdoutput, reg_section);
+ bfd_section_list_remove (stdoutput, expr_section);
+ stdoutput->section_count -= 2;
i = 0;
bfd_map_over_sections (stdoutput, renumber_sections, &i);
}
bfd_map_over_sections (stdoutput, chain_frchains_together, (char *) 0);
-#else
- remove_subsegs (frchain_root, SEG_TEXT, &text_frag_root, &text_last_frag);
- remove_subsegs (data0_frchainP, SEG_DATA, &data_frag_root, &data_last_frag);
- remove_subsegs (bss0_frchainP, SEG_BSS, &bss_frag_root, &bss_last_frag);
-#endif
/* We have two segments. If user gave -R flag, then we must put the
data frags into the text segment. Do this before relaxing so
we know to take advantage of -R and make shorter addresses. */
-#if !defined (OBJ_AOUT) || defined (BFD_ASSEMBLER)
if (flag_readonly_data_in_text)
{
merge_data_into_text ();
}
-#endif
-#ifdef BFD_ASSEMBLER
while (1)
{
int changed;
finalize_syms = TC_FINALIZE_SYMS_BEFORE_SIZE_SEG;
bfd_map_over_sections (stdoutput, size_seg, (char *) 0);
-#else
- relax_and_size_all_segments ();
-#endif /* BFD_ASSEMBLER */
/* Relaxation has completed. Freeze all syms. */
finalize_syms = 1;
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
- /* Now that the segments have their final sizes, run through the
- sections and set their vma and lma. !BFD gas sets them, and BFD gas
- should too. Currently, only DJGPP uses this code, but other
- COFF targets may need to execute this too. */
- bfd_map_over_sections (stdoutput, set_segment_vma, (char *) 0);
-#endif
-
-#ifndef BFD_ASSEMBLER
- /* Crawl the symbol chain.
-
- For each symbol whose value depends on a frag, take the address of
- that frag and subsume it into the value of the symbol.
- After this, there is just one way to lookup a symbol value.
- Values are left in their final state for object file emission.
- We adjust the values of 'L' local symbols, even if we do
- not intend to emit them to the object file, because their values
- are needed for fix-ups.
-
- Unless we saw a -L flag, remove all symbols that begin with 'L'
- from the symbol chain. (They are still pointed to by the fixes.)
-
- Count the remaining symbols.
- Assign a symbol number to each symbol.
- Count the number of string-table chars we will emit.
- Put this info into the headers as appropriate. */
- know (zero_address_frag.fr_address == 0);
- string_byte_count = sizeof (string_byte_count);
-
- obj_crawl_symbol_chain (&headers);
-
- if (string_byte_count == sizeof (string_byte_count))
- string_byte_count = 0;
-
- H_SET_STRING_SIZE (&headers, string_byte_count);
-
- /* Addresses of frags now reflect addresses we use in the object file.
- Symbol values are correct.
- Scan the frags, converting any ".org"s and ".align"s to ".fill"s.
- Also converting any machine-dependent frags using md_convert_frag(); */
- subseg_change (SEG_TEXT, 0);
-
- for (fragP = text_frag_root; fragP; fragP = fragP->fr_next)
- {
- /* At this point we have linked all the frags into a single
- chain. However, cvt_frag_to_fill may call md_convert_frag
- which may call fix_new. We need to ensure that fix_new adds
- the fixup to the right section. */
- if (fragP == data_frag_root)
- subseg_change (SEG_DATA, 0);
-
- cvt_frag_to_fill (&headers, SEG_TEXT, fragP);
-
- /* Some assert macros don't work with # directives mixed in. */
-#ifndef NDEBUG
- if (!(fragP->fr_next == NULL
-#ifdef OBJ_BOUT
- || fragP->fr_next == data_frag_root
-#endif
- || ((fragP->fr_next->fr_address - fragP->fr_address)
- == (fragP->fr_fix + fragP->fr_offset * fragP->fr_var))))
- abort ();
+#ifdef md_post_relax_hook
+ md_post_relax_hook;
#endif
- }
-#endif /* ! BFD_ASSEMBLER */
#ifndef WORKING_DOT_WORD
{
exp.X_add_symbol = lie->add;
exp.X_op_symbol = lie->sub;
exp.X_add_number = lie->addnum;
-#ifdef BFD_ASSEMBLER
#ifdef TC_CONS_FIX_NEW
TC_CONS_FIX_NEW (lie->frag,
lie->word_goes_here - lie->frag->fr_literal,
lie->word_goes_here - lie->frag->fr_literal,
2, &exp, 0, BFD_RELOC_16);
#endif
-#else
-#if defined(TC_SPARC) || defined(TC_A29K) || defined(NEED_FX_R_TYPE)
- fix_new_exp (lie->frag,
- lie->word_goes_here - lie->frag->fr_literal,
- 2, &exp, 0, NO_RELOC);
-#else
-#ifdef TC_NS32K
- fix_new_ns32k_exp (lie->frag,
- lie->word_goes_here - lie->frag->fr_literal,
- 2, &exp, 0, 0, 2, 0, 0);
-#else
- fix_new_exp (lie->frag,
- lie->word_goes_here - lie->frag->fr_literal,
- 2, &exp, 0, 0);
-#endif /* TC_NS32K */
-#endif /* TC_SPARC|TC_A29K|NEED_FX_R_TYPE */
-#endif /* BFD_ASSEMBLER */
*prevP = lie->next_broken_word;
}
else
}
#endif /* not WORKING_DOT_WORD */
-#ifndef BFD_ASSEMBLER
-#ifndef OBJ_VMS
- { /* not vms */
- char *the_object_file;
- long object_file_size;
- /* Scan every FixS performing fixups. We had to wait until now to
- do this because md_convert_frag() may have made some fixSs. */
- int trsize, drsize;
-
- subseg_change (SEG_TEXT, 0);
- trsize = md_reloc_size * fixup_segment (text_fix_root, SEG_TEXT);
- subseg_change (SEG_DATA, 0);
- drsize = md_reloc_size * fixup_segment (data_fix_root, SEG_DATA);
- H_SET_RELOCATION_SIZE (&headers, trsize, drsize);
-
- /* FIXME: Move this stuff into the pre-write-hook. */
- H_SET_MAGIC_NUMBER (&headers, magic_number_for_object_file);
- H_SET_ENTRY_POINT (&headers, 0);
-
- obj_pre_write_hook (&headers); /* Extra coff stuff. */
-
- object_file_size = H_GET_FILE_SIZE (&headers);
- next_object_file_charP = the_object_file = xmalloc (object_file_size);
-
- output_file_create (out_file_name);
-
- obj_header_append (&next_object_file_charP, &headers);
-
- know ((next_object_file_charP - the_object_file)
- == H_GET_HEADER_SIZE (&headers));
-
- /* Emit code. */
- for (fragP = text_frag_root; fragP; fragP = fragP->fr_next)
- {
- register long count;
- register char *fill_literal;
- register long fill_size;
-
- PROGRESS (1);
- know (fragP->fr_type == rs_fill);
- append (&next_object_file_charP, fragP->fr_literal,
- (unsigned long) fragP->fr_fix);
- fill_literal = fragP->fr_literal + fragP->fr_fix;
- fill_size = fragP->fr_var;
- know (fragP->fr_offset >= 0);
-
- for (count = fragP->fr_offset; count; count--)
- append (&next_object_file_charP, fill_literal,
- (unsigned long) fill_size);
- }
-
- know ((next_object_file_charP - the_object_file)
- == (H_GET_HEADER_SIZE (&headers)
- + H_GET_TEXT_SIZE (&headers)
- + H_GET_DATA_SIZE (&headers)));
-
- /* Emit relocations. */
- obj_emit_relocations (&next_object_file_charP, text_fix_root,
- (relax_addressT) 0);
- know ((next_object_file_charP - the_object_file)
- == (H_GET_HEADER_SIZE (&headers)
- + H_GET_TEXT_SIZE (&headers)
- + H_GET_DATA_SIZE (&headers)
- + H_GET_TEXT_RELOCATION_SIZE (&headers)));
-#ifdef TC_I960
- /* Make addresses in data relocation directives relative to beginning of
- first data fragment, not end of last text fragment: alignment of the
- start of the data segment may place a gap between the segments. */
- obj_emit_relocations (&next_object_file_charP, data_fix_root,
- data0_frchainP->frch_root->fr_address);
-#else /* TC_I960 */
- obj_emit_relocations (&next_object_file_charP, data_fix_root,
- text_last_frag->fr_address);
-#endif /* TC_I960 */
-
- know ((next_object_file_charP - the_object_file)
- == (H_GET_HEADER_SIZE (&headers)
- + H_GET_TEXT_SIZE (&headers)
- + H_GET_DATA_SIZE (&headers)
- + H_GET_TEXT_RELOCATION_SIZE (&headers)
- + H_GET_DATA_RELOCATION_SIZE (&headers)));
-
- /* Emit line number entries. */
- OBJ_EMIT_LINENO (&next_object_file_charP, lineno_rootP, the_object_file);
- know ((next_object_file_charP - the_object_file)
- == (H_GET_HEADER_SIZE (&headers)
- + H_GET_TEXT_SIZE (&headers)
- + H_GET_DATA_SIZE (&headers)
- + H_GET_TEXT_RELOCATION_SIZE (&headers)
- + H_GET_DATA_RELOCATION_SIZE (&headers)
- + H_GET_LINENO_SIZE (&headers)));
-
- /* Emit symbols. */
- obj_emit_symbols (&next_object_file_charP, symbol_rootP);
- know ((next_object_file_charP - the_object_file)
- == (H_GET_HEADER_SIZE (&headers)
- + H_GET_TEXT_SIZE (&headers)
- + H_GET_DATA_SIZE (&headers)
- + H_GET_TEXT_RELOCATION_SIZE (&headers)
- + H_GET_DATA_RELOCATION_SIZE (&headers)
- + H_GET_LINENO_SIZE (&headers)
- + H_GET_SYMBOL_TABLE_SIZE (&headers)));
-
- /* Emit strings. */
- if (string_byte_count > 0)
- obj_emit_strings (&next_object_file_charP);
-
-#ifdef BFD_HEADERS
- bfd_seek (stdoutput, (file_ptr) 0, 0);
- bfd_bwrite (the_object_file, (bfd_size_type) object_file_size, stdoutput);
-#else
-
- /* Write the data to the file. */
- output_file_append (the_object_file, object_file_size, out_file_name);
- free (the_object_file);
-#endif
- }
-#else /* OBJ_VMS */
- /* Now do the VMS-dependent part of writing the object file. */
- vms_write_object_file (H_GET_TEXT_SIZE (&headers),
- H_GET_DATA_SIZE (&headers),
- H_GET_BSS_SIZE (&headers),
- text_frag_root, data_frag_root);
-#endif /* OBJ_VMS */
-#else /* BFD_ASSEMBLER */
-
/* Resolve symbol values. This needs to be done before processing
the relocations. */
if (symbol_rootP)
bfd_map_over_sections (stdoutput, adjust_reloc_syms, (char *) 0);
+#ifdef tc_frob_file_before_fix
+ tc_frob_file_before_fix ();
+#endif
+#ifdef obj_frob_file_before_fix
+ obj_frob_file_before_fix ();
+#endif
+
+ bfd_map_over_sections (stdoutput, fix_segment, (char *) 0);
+
/* Set up symbol table, and write it out. */
if (symbol_rootP)
{
symbolS *symp;
+ bfd_boolean skip_next_symbol = FALSE;
for (symp = symbol_rootP; symp; symp = symbol_next (symp))
{
int punt = 0;
const char *name;
+ if (skip_next_symbol)
+ {
+ /* Don't do anything besides moving the value of the
+ symbol from the GAS value-field to the BFD value-field. */
+ symbol_get_bfdsym (symp)->value = S_GET_VALUE (symp);
+ skip_next_symbol = FALSE;
+ continue;
+ }
+
if (symbol_mri_common_p (symp))
{
if (S_IS_EXTERNAL (symp))
symbols. */
if (symbol_equated_reloc_p (symp))
{
+ const char *name = S_GET_NAME (symp);
+ if (S_IS_COMMON (symp)
+ && !TC_FAKE_LABEL (name)
+ && (!S_IS_EXTERNAL (symp) || S_IS_LOCAL (symp)))
+ {
+ expressionS *e = symbol_get_value_expression (symp);
+ as_bad (_("Local symbol `%s' can't be equated to common symbol `%s'"),
+ name, S_GET_NAME (e->X_add_symbol));
+ }
symbol_remove (symp, &symbol_rootP, &symbol_lastP);
continue;
}
if (S_IS_DEFINED (symp) == 0
&& S_GET_VALUE (symp) != 0)
S_SET_SEGMENT (symp, bfd_com_section_ptr);
-#if 0
- printf ("symbol `%s'\n\t@%x: value=%d flags=%x seg=%s\n",
- S_GET_NAME (symp), symp,
- S_GET_VALUE (symp),
- symbol_get_bfdsym (symp)->flags,
- segment_name (S_GET_SEGMENT (symp)));
-#endif
#ifdef obj_frob_symbol
obj_frob_symbol (symp, punt);
want section symbols. Otherwise, we skip local symbols
and symbols that the frob_symbol macros told us to punt,
but we keep such symbols if they are used in relocs. */
- if ((! EMIT_SECTION_SYMBOLS
- && symbol_section_p (symp))
- /* Note that S_IS_EXTERN and S_IS_LOCAL are not always
+ if (symp == abs_section_sym
+ || (! EMIT_SECTION_SYMBOLS
+ && symbol_section_p (symp))
+ /* Note that S_IS_EXTERNAL and S_IS_LOCAL are not always
opposites. Sometimes the former checks flags and the
latter examines the name... */
- || (!S_IS_EXTERN (symp)
- && (S_IS_LOCAL (symp) || punt)
+ || (!S_IS_EXTERNAL (symp)
+ && (punt || S_IS_LOCAL (symp))
&& ! symbol_used_in_reloc_p (symp)))
{
symbol_remove (symp, &symbol_rootP, &symbol_lastP);
/* Set the value into the BFD symbol. Up til now the value
has only been kept in the gas symbolS struct. */
symbol_get_bfdsym (symp)->value = S_GET_VALUE (symp);
+
+ /* A warning construct is a warning symbol followed by the
+ symbol warned about. Don't let anything object-format or
+ target-specific muck with it; it's ready for output. */
+ if (symbol_get_bfdsym (symp)->flags & BSF_WARNING)
+ skip_next_symbol = TRUE;
}
}
#endif
bfd_map_over_sections (stdoutput, write_contents, (char *) 0);
-#endif /* BFD_ASSEMBLER */
}
-#endif /* ! BFD */
#ifdef TC_GENERIC_RELAX_TABLE
-
/* Relax a fragment by scanning TC_GENERIC_RELAX_TABLE. */
long
-relax_frag (segment, fragP, stretch)
- segT segment;
- fragS *fragP;
- long stretch;
+relax_frag (segT segment, fragS *fragP, long stretch)
{
const relax_typeS *this_type;
const relax_typeS *start_type;
relax_substateT next_state;
relax_substateT this_state;
- long growth;
+ offsetT growth;
offsetT aim;
addressT target;
addressT address;
sym_frag = symbol_get_frag (symbolP);
#ifndef DIFF_EXPR_OK
-#if !defined (MANY_SEGMENTS) && !defined (BFD_ASSEMBLER)
- know ((S_GET_SEGMENT (symbolP) == SEG_ABSOLUTE)
- || (S_GET_SEGMENT (symbolP) == SEG_DATA)
- || (S_GET_SEGMENT (symbolP) == SEG_BSS)
- || (S_GET_SEGMENT (symbolP) == SEG_TEXT));
-#endif
know (sym_frag != NULL);
#endif
- know (!(S_GET_SEGMENT (symbolP) == absolute_section)
+ know (S_GET_SEGMENT (symbolP) != absolute_section
|| sym_frag == &zero_address_frag);
target += S_GET_VALUE (symbolP);
#ifdef TC_PCREL_ADJUST
/* Currently only the ns32k family needs this. */
aim += TC_PCREL_ADJUST (fragP);
-/* #else */
- /* This machine doesn't want to use pcrel_adjust.
- In that case, pcrel_adjust should be zero. */
-#if 0
- assert (fragP->fr_targ.ns32k.pcrel_adjust == 0);
-#endif
#endif
-#ifdef md_prepare_relax_scan /* formerly called M68K_AIM_KLUDGE */
+
+#ifdef md_prepare_relax_scan
+ /* Formerly called M68K_AIM_KLUDGE. */
md_prepare_relax_scan (fragP, address, aim, this_state, this_type);
#endif
/* Relax_align. Advance location counter to next address that has 'alignment'
lowest order bits all 0s, return size of adjustment made. */
static relax_addressT
-relax_align (address, alignment)
- register relax_addressT address; /* Address now. */
- register int alignment; /* Alignment (binary). */
+relax_align (register relax_addressT address, /* Address now. */
+ register int alignment /* Alignment (binary). */)
{
relax_addressT mask;
relax_addressT new_address;
addresses. */
int
-relax_segment (segment_frag_root, segment)
- struct frag *segment_frag_root;
- segT segment;
+relax_segment (struct frag *segment_frag_root, segT segment)
{
- register struct frag *fragP;
- register relax_addressT address;
+ unsigned long frag_count;
+ struct frag *fragP;
+ relax_addressT address;
int ret;
-#if !defined (MANY_SEGMENTS) && !defined (BFD_ASSEMBLER)
- know (segment == SEG_DATA || segment == SEG_TEXT || segment == SEG_BSS);
-#endif
/* In case md_estimate_size_before_relax() wants to make fixSs. */
subseg_change (segment, 0);
/* For each frag in segment: count and store (a 1st guess of)
fr_address. */
address = 0;
- for (fragP = segment_frag_root; fragP; fragP = fragP->fr_next)
+ for (frag_count = 0, fragP = segment_frag_root;
+ fragP;
+ fragP = fragP->fr_next, frag_count ++)
{
fragP->relax_marker = 0;
fragP->fr_address = address;
/* Do relax(). */
{
- long stretch; /* May be any size, 0 or negative. */
+ unsigned long max_iterations;
+ offsetT stretch; /* May be any size, 0 or negative. */
/* Cumulative number of addresses we have relaxed this pass.
We may have relaxed more than one address. */
int stretched; /* Have we stretched on this pass? */
grew, and another shrank. If a branch instruction doesn't fit anymore,
we could be scrod. */
+ /* We want to prevent going into an infinite loop where one frag grows
+ depending upon the location of a symbol which is in turn moved by
+ the growing frag. eg:
+
+ foo = .
+ .org foo+16
+ foo = .
+
+ So we dictate that this algorithm can be at most O2. */
+ max_iterations = frag_count * frag_count;
+ /* Check for overflow. */
+ if (max_iterations < frag_count)
+ max_iterations = frag_count;
+
do
{
stretch = 0;
for (fragP = segment_frag_root; fragP; fragP = fragP->fr_next)
{
- long growth = 0;
+ offsetT growth = 0;
addressT was_address;
offsetT offset;
symbolS *symbolP;
if (symbolP)
{
-#if !defined (MANY_SEGMENTS) && !defined (BFD_ASSEMBLER)
- know ((S_GET_SEGMENT (symbolP) == SEG_ABSOLUTE)
- || (S_GET_SEGMENT (symbolP) == SEG_DATA)
- || (S_GET_SEGMENT (symbolP) == SEG_TEXT)
- || S_GET_SEGMENT (symbolP) == SEG_BSS);
- know (symbolP->sy_frag);
- know (!(S_GET_SEGMENT (symbolP) == SEG_ABSOLUTE)
- || (symbolP->sy_frag == &zero_address_frag));
-#endif
/* Convert from an actual address to an octet offset
into the section. Here it is assumed that the
section's VMA is zero, and can omit subtracting it
from the symbol's value to get the address offset. */
- know (S_GET_SECTION (symbolP)->vma == 0);
+ know (S_GET_SEGMENT (symbolP)->vma == 0);
target += S_GET_VALUE (symbolP) * OCTETS_PER_BYTE;
}
cannot have fewer than 0 chars. That is, we can't
.org backwards. */
as_bad_where (fragP->fr_file, fragP->fr_line,
- _("attempt to .org backwards"));
+ _("attempt to move .org backwards"));
/* We've issued an error message. Change the
frag to avoid cascading errors. */
fragP->fr_type = rs_align;
fragP->fr_subtype = 0;
fragP->fr_offset = 0;
- fragP->fr_fix = after - address;
+ fragP->fr_fix = after - was_address;
growth = stretch;
}
case rs_leb128:
{
valueT value;
- int size;
+ offsetT size;
value = resolve_symbol_value (fragP->fr_symbol);
size = sizeof_leb128 (value, fragP->fr_subtype);
stretch += growth;
stretched = 1;
}
- } /* For each frag in the segment. */
+ }
}
- while (stretched); /* Until nothing further to relax. */
- } /* do_relax */
+ /* Until nothing further to relax. */
+ while (stretched && -- max_iterations);
+
+ if (stretched)
+ as_fatal (_("Infinite loop encountered whilst attempting to compute the addresses of symbols in section %s"),
+ segment_name (segment));
+ }
ret = 0;
for (fragP = segment_frag_root; fragP; fragP = fragP->fr_next)
return ret;
}
-#if defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS))
-
-#ifndef TC_RELOC_RTSYM_LOC_FIXUP
-#define TC_RELOC_RTSYM_LOC_FIXUP(X) (1)
-#endif
-
/* fixup_segment()
Go through all the fixS's in a segment and see which ones can be
handled now. (These consist of fixS where we have since discovered
the value of a symbol, or the address of the frag involved.)
- For each one, call md_apply_fix3 to put the fix into the frag data.
+ For each one, call md_apply_fix to put the fix into the frag data.
Result is a count of how many relocation structs will be needed to
handle the remaining fixS's that we couldn't completely handle here.
These will be output later by emit_relocations(). */
static long
-fixup_segment (fixP, this_segment_type)
- register fixS *fixP;
- segT this_segment_type; /* N_TYPE bits for segment. */
+fixup_segment (fixS *fixP, segT this_segment)
{
long seg_reloc_count = 0;
- symbolS *add_symbolP;
- symbolS *sub_symbolP;
valueT add_number;
- int size;
- char *place;
- long where;
- int pcrel, plt;
fragS *fragP;
segT add_symbol_segment = absolute_section;
+ if (fixP != NULL && abs_section_sym == NULL)
+ abs_section_sym = section_symbol (absolute_section);
+
/* If the linker is doing the relaxing, we must not do any fixups.
- Well, strictly speaking that's not true -- we could do any that are
- PC-relative and don't cross regions that could change size. And for the
- i960 (the only machine for which we've got a relaxing linker right now),
- we might be able to turn callx/callj into bal anyways in cases where we
- know the maximum displacement. */
- if (linkrelax && TC_LINKRELAX_FIXUP (this_segment_type))
+ Well, strictly speaking that's not true -- we could do any that
+ are PC-relative and don't cross regions that could change size.
+ And for the i960 we might be able to turn callx/callj into bal
+ anyways in cases where we know the maximum displacement. */
+ if (linkrelax && TC_LINKRELAX_FIXUP (this_segment))
{
for (; fixP; fixP = fixP->fx_next)
- seg_reloc_count++;
+ if (!fixP->fx_done)
+ {
+ if (fixP->fx_addsy == NULL)
+ {
+ /* There was no symbol required by this relocation.
+ However, BFD doesn't really handle relocations
+ without symbols well. So fake up a local symbol in
+ the absolute section. */
+ fixP->fx_addsy = abs_section_sym;
+ }
+ symbol_mark_used_in_reloc (fixP->fx_addsy);
+ if (fixP->fx_subsy != NULL)
+ symbol_mark_used_in_reloc (fixP->fx_subsy);
+ seg_reloc_count++;
+ }
TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
return seg_reloc_count;
}
fragP = fixP->fx_frag;
know (fragP);
- where = fixP->fx_where;
- place = fragP->fr_literal + where;
- size = fixP->fx_size;
- add_symbolP = fixP->fx_addsy;
#ifdef TC_VALIDATE_FIX
- TC_VALIDATE_FIX (fixP, this_segment_type, skip);
+ TC_VALIDATE_FIX (fixP, this_segment, skip);
#endif
- sub_symbolP = fixP->fx_subsy;
add_number = fixP->fx_offset;
- pcrel = fixP->fx_pcrel;
- plt = fixP->fx_plt;
- if (add_symbolP != NULL
- && symbol_mri_common_p (add_symbolP))
+ if (fixP->fx_addsy != NULL
+ && symbol_mri_common_p (fixP->fx_addsy))
{
- know (add_symbolP->sy_value.X_op == O_symbol);
- add_number += S_GET_VALUE (add_symbolP);
+ add_number += S_GET_VALUE (fixP->fx_addsy);
fixP->fx_offset = add_number;
- add_symbolP = fixP->fx_addsy =
- symbol_get_value_expression (add_symbolP)->X_add_symbol;
+ fixP->fx_addsy
+ = symbol_get_value_expression (fixP->fx_addsy)->X_add_symbol;
}
- if (add_symbolP)
- add_symbol_segment = S_GET_SEGMENT (add_symbolP);
+ if (fixP->fx_addsy != NULL)
+ add_symbol_segment = S_GET_SEGMENT (fixP->fx_addsy);
- if (sub_symbolP)
+ if (fixP->fx_subsy != NULL)
{
- resolve_symbol_value (sub_symbolP);
- if (add_symbolP == NULL || add_symbol_segment == absolute_section)
- {
- if (add_symbolP != NULL)
- {
- add_number += S_GET_VALUE (add_symbolP);
- add_symbolP = NULL;
- fixP->fx_addsy = NULL;
- }
-
- /* It's just -sym. */
- if (S_GET_SEGMENT (sub_symbolP) == absolute_section)
- {
- add_number -= S_GET_VALUE (sub_symbolP);
- fixP->fx_subsy = NULL;
- }
- else if (pcrel
- && S_GET_SEGMENT (sub_symbolP) == this_segment_type)
- {
- /* Should try converting to a constant. */
- goto bad_sub_reloc;
- }
- else
- bad_sub_reloc:
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("negative of non-absolute symbol `%s'"),
- S_GET_NAME (sub_symbolP));
- }
- else if (S_GET_SEGMENT (sub_symbolP) == add_symbol_segment
- && SEG_NORMAL (add_symbol_segment))
+ segT sub_symbol_segment;
+ resolve_symbol_value (fixP->fx_subsy);
+ sub_symbol_segment = S_GET_SEGMENT (fixP->fx_subsy);
+ if (fixP->fx_addsy != NULL
+ && sub_symbol_segment == add_symbol_segment
+ && !TC_FORCE_RELOCATION_SUB_SAME (fixP, add_symbol_segment))
{
- /* Difference of 2 symbols from same segment.
- Can't make difference of 2 undefineds: 'value' means
- something different for N_UNDF. */
-#ifdef TC_I960
- /* Makes no sense to use the difference of 2 arbitrary symbols
- as the target of a call instruction. */
- if (fixP->fx_tcbit)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("callj to difference of two symbols"));
-#endif /* TC_I960 */
- add_number += (S_GET_VALUE (add_symbolP)
- - S_GET_VALUE (sub_symbolP));
- if (1
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = add_number;
+ fixP->fx_addsy = NULL;
+ fixP->fx_subsy = NULL;
#ifdef TC_M68K
- /* See the comment below about 68k weirdness. */
- && 0
+ /* See the comment below about 68k weirdness. */
+ fixP->fx_pcrel = 0;
#endif
- && pcrel)
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
-
- add_symbolP = NULL;
- pcrel = 0; /* No further pcrel processing. */
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION_SECTION (fixP, this_segment_type))
- {
- fixP->fx_pcrel = 0;
- fixP->fx_addsy = NULL;
- fixP->fx_subsy = NULL;
- }
}
- else
+ else if (sub_symbol_segment == absolute_section
+ && !TC_FORCE_RELOCATION_SUB_ABS (fixP))
{
- /* Different segments in subtraction. */
- know (!(S_IS_EXTERNAL (sub_symbolP)
- && (S_GET_SEGMENT (sub_symbolP) == absolute_section)));
-
- if ((S_GET_SEGMENT (sub_symbolP) == absolute_section))
- add_number -= S_GET_VALUE (sub_symbolP);
-
-#ifdef DIFF_EXPR_OK
- else if (S_GET_SEGMENT (sub_symbolP) == this_segment_type)
- {
- /* Make it pc-relative. */
- if (0
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = add_number;
+ fixP->fx_subsy = NULL;
+ }
+ else if (sub_symbol_segment == this_segment
+ && !TC_FORCE_RELOCATION_SUB_LOCAL (fixP))
+ {
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = (add_number + fixP->fx_dot_value
+ + fixP->fx_frag->fr_address);
+
+ /* Make it pc-relative. If the back-end code has not
+ selected a pc-relative reloc, cancel the adjustment
+ we do later on all pc-relative relocs. */
+ if (0
#ifdef TC_M68K
- /* Do this for m68k even if it's already described
- as pc-relative. On the m68k, an operand of
- "pc@(foo-.-2)" should address "foo" in a
- pc-relative mode. */
- || 1
-#endif
- || !pcrel)
- {
- add_number += MD_PCREL_FROM_SECTION (fixP,
- this_segment_type);
- pcrel = 1;
- fixP->fx_pcrel = 1;
- }
-
- add_number -= S_GET_VALUE (sub_symbolP);
- sub_symbolP = 0;
- fixP->fx_subsy = 0;
- }
-#endif
-#ifdef UNDEFINED_DIFFERENCE_OK
- /* The PA needs this for PIC code generation. We basically
- don't want to do anything if we have the difference of two
- symbols at this point. */
- else if (1)
- {
- /* Leave it alone. */
- }
-#endif
-#ifdef BFD_ASSEMBLER
- else if (fixP->fx_r_type == BFD_RELOC_GPREL32
- || fixP->fx_r_type == BFD_RELOC_GPREL16)
- {
- /* Leave it alone. */
- }
-#endif
- else
- {
- char buf[50];
- sprint_value (buf, fragP->fr_address + where);
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("subtraction of two symbols in different sections `%s' {%s section} - `%s' {%s section} at file address %s"),
- S_GET_NAME (add_symbolP),
- segment_name (S_GET_SEGMENT (add_symbolP)),
- S_GET_NAME (sub_symbolP),
- segment_name (S_GET_SEGMENT (sub_symbolP)),
- buf);
- }
+ /* Do this for m68k even if it's already described
+ as pc-relative. On the m68k, an operand of
+ "pc@(foo-.-2)" should address "foo" in a
+ pc-relative mode. */
+ || 1
+#endif
+ || !fixP->fx_pcrel)
+ add_number += MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_subsy = NULL;
+ fixP->fx_pcrel = 1;
+ }
+ else if (!TC_VALIDATE_FIX_SUB (fixP))
+ {
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("can't resolve `%s' {%s section} - `%s' {%s section}"),
+ fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : "0",
+ segment_name (add_symbol_segment),
+ S_GET_NAME (fixP->fx_subsy),
+ segment_name (sub_symbol_segment));
}
}
- if (add_symbolP)
+ if (fixP->fx_addsy)
{
- if (add_symbol_segment == this_segment_type && pcrel && !plt
- && TC_RELOC_RTSYM_LOC_FIXUP (fixP))
+ if (add_symbol_segment == this_segment
+ && !TC_FORCE_RELOCATION_LOCAL (fixP))
{
/* This fixup was made when the symbol's segment was
SEG_UNKNOWN, but it is now in the local segment.
So we know how to do the address without relocation. */
-#ifdef TC_I960
- /* reloc_callj() may replace a 'call' with a 'calls' or a
- 'bal', in which cases it modifies *fixP as appropriate.
- In the case of a 'calls', no further work is required,
- and *fixP has been set up to make the rest of the code
- below a no-op. */
- reloc_callj (fixP);
-#endif /* TC_I960 */
-
- add_number += S_GET_VALUE (add_symbolP);
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
- /* Lie. Don't want further pcrel processing. */
- pcrel = 0;
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION (fixP))
- {
- fixP->fx_pcrel = 0;
- fixP->fx_addsy = NULL;
- }
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ fixP->fx_offset = add_number;
+ if (fixP->fx_pcrel)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_addsy = NULL;
+ fixP->fx_pcrel = 0;
}
- else
+ else if (add_symbol_segment == absolute_section
+ && !TC_FORCE_RELOCATION_ABS (fixP))
{
- if (add_symbol_segment == absolute_section
- && ! pcrel)
- {
-#ifdef TC_I960
- /* See comment about reloc_callj() above. */
- reloc_callj (fixP);
-#endif /* TC_I960 */
- add_number += S_GET_VALUE (add_symbolP);
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
-
- if (!TC_FORCE_RELOCATION (fixP))
- {
- fixP->fx_addsy = NULL;
- add_symbolP = NULL;
- }
- }
- else if (add_symbol_segment == undefined_section
-#ifdef BFD_ASSEMBLER
- || bfd_is_com_section (add_symbol_segment)
-#endif
- )
- {
-#ifdef TC_I960
- if ((int) fixP->fx_bit_fixP == 13)
- {
- /* This is a COBR instruction. They have only a
- 13-bit displacement and are only to be used
- for local branches: flag as error, don't generate
- relocation. */
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("can't use COBR format with external label"));
- fixP->fx_addsy = NULL;
- fixP->fx_done = 1;
- continue;
- } /* COBR. */
-#endif /* TC_I960 */
-
-#ifdef OBJ_COFF
-#ifdef TE_I386AIX
- if (S_IS_COMMON (add_symbolP))
- add_number += S_GET_VALUE (add_symbolP);
-#endif /* TE_I386AIX */
-#endif /* OBJ_COFF */
- ++seg_reloc_count;
- }
- else
- {
- seg_reloc_count++;
- if (TC_FIX_ADJUSTABLE (fixP))
- add_number += S_GET_VALUE (add_symbolP);
- }
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ fixP->fx_offset = add_number;
+ fixP->fx_addsy = NULL;
}
+ else if (add_symbol_segment != undefined_section
+ && ! bfd_is_com_section (add_symbol_segment)
+ && MD_APPLY_SYM_VALUE (fixP))
+ add_number += S_GET_VALUE (fixP->fx_addsy);
}
- if (pcrel)
+ if (fixP->fx_pcrel)
{
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
- if (add_symbolP == 0)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ if (!fixP->fx_done && fixP->fx_addsy == NULL)
{
-#ifndef BFD_ASSEMBLER
- fixP->fx_addsy = &abs_symbol;
-#else
- fixP->fx_addsy = section_symbol (absolute_section);
-#endif
- symbol_mark_used_in_reloc (fixP->fx_addsy);
- ++seg_reloc_count;
+ /* There was no symbol required by this relocation.
+ However, BFD doesn't really handle relocations
+ without symbols well. So fake up a local symbol in
+ the absolute section. */
+ fixP->fx_addsy = abs_section_sym;
}
}
if (!fixP->fx_done)
- md_apply_fix3 (fixP, & add_number, this_segment_type);
+ md_apply_fix (fixP, &add_number, this_segment);
+
+ if (!fixP->fx_done)
+ {
+ ++seg_reloc_count;
+ if (fixP->fx_addsy == NULL)
+ fixP->fx_addsy = abs_section_sym;
+ symbol_mark_used_in_reloc (fixP->fx_addsy);
+ if (fixP->fx_subsy != NULL)
+ symbol_mark_used_in_reloc (fixP->fx_subsy);
+ }
- if (!fixP->fx_bit_fixP && !fixP->fx_no_overflow && size > 0)
+ if (!fixP->fx_bit_fixP && !fixP->fx_no_overflow && fixP->fx_size != 0)
{
- if ((size_t) size < sizeof (valueT))
+ if (fixP->fx_size < sizeof (valueT))
{
valueT mask;
mask = 0;
mask--; /* Set all bits to one. */
- mask <<= size * 8 - (fixP->fx_signed ? 1 : 0);
+ mask <<= fixP->fx_size * 8 - (fixP->fx_signed ? 1 : 0);
if ((add_number & mask) != 0 && (add_number & mask) != mask)
{
char buf[50], buf2[50];
- sprint_value (buf, fragP->fr_address + where);
+ sprint_value (buf, fragP->fr_address + fixP->fx_where);
if (add_number > 1000)
sprint_value (buf2, add_number);
else
sprintf (buf2, "%ld", (long) add_number);
as_bad_where (fixP->fx_file, fixP->fx_line,
_("value of %s too large for field of %d bytes at %s"),
- buf2, size, buf);
+ buf2, fixP->fx_size, buf);
} /* Generic error checking. */
}
#ifdef WARN_SIGNED_OVERFLOW_WORD
number. We already know it is not too negative. This is to
catch over-large switches generated by gcc on the 68k. */
if (!flag_signed_overflow_ok
- && size == 2
+ && fixP->fx_size == 2
&& add_number > 0x7fff)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("signed .word overflow; switch may be too large; %ld at 0x%lx"),
(long) add_number,
- (unsigned long) (fragP->fr_address + where));
+ (long) (fragP->fr_address + fixP->fx_where));
#endif
} /* Not a bit fix. */
return seg_reloc_count;
}
-#endif /* defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS)) */
-
void
-number_to_chars_bigendian (buf, val, n)
- char *buf;
- valueT val;
- int n;
+number_to_chars_bigendian (char *buf, valueT val, int n)
{
- if ((size_t) n > sizeof (val) || n <= 0)
+ if (n <= 0)
abort ();
while (n--)
{
}
void
-number_to_chars_littleendian (buf, val, n)
- char *buf;
- valueT val;
- int n;
+number_to_chars_littleendian (char *buf, valueT val, int n)
{
- if ((size_t) n > sizeof (val) || n <= 0)
+ if (n <= 0)
abort ();
while (n--)
{
}
void
-write_print_statistics (file)
- FILE *file;
+write_print_statistics (FILE *file)
{
fprintf (file, "fixups: %d\n", n_fixups);
}
extern int indent_level;
void
-print_fixup (fixp)
- fixS *fixp;
+print_fixup (fixS *fixp)
{
indent_level = 1;
fprintf (stderr, "fix %lx %s:%d", (long) fixp, fixp->fx_file, fixp->fx_line);
fprintf (stderr, "\n size=%d frag=%lx where=%ld offset=%lx addnumber=%lx",
fixp->fx_size, (long) fixp->fx_frag, (long) fixp->fx_where,
(long) fixp->fx_offset, (long) fixp->fx_addnumber);
-#ifdef BFD_ASSEMBLER
fprintf (stderr, "\n %s (%d)", bfd_get_reloc_code_name (fixp->fx_r_type),
fixp->fx_r_type);
-#else
-#ifdef NEED_FX_R_TYPE
- fprintf (stderr, " r_type=%d", fixp->fx_r_type);
-#endif
-#endif
if (fixp->fx_addsy)
{
fprintf (stderr, "\n +<");