Do-first:
-mpw_files="mpw-config.in mpw-make.in ser-mac.c mac-xdep.c mac-defs.h macgdb.r ChangeLog.mpw"
+arc_files="arc-tdep.c remote-arc.c"
-if ( echo $* | grep keep\-mpw > /dev/null ) ; then
- keep_these_too="${mpw_files} ${keep_these_too}"
+if ( echo $* | grep keep\-arc > /dev/null ) ; then
+ keep_these_too="${arc_files} ${keep_these_too}"
if [ -n "${verbose}" ] ; then
- echo Keeping ${mpw_files}
+ echo Keeping ${arc_files}
fi
else
- lose_these_too="${mpw_files} ${lose_these_too}"
+ lose_these_too="${arc_files} ${lose_these_too}"
if [ -n "${verbose}" ] ; then
- echo Deleting ${mpw_files}
+ echo Deleting ${arc_files}
fi
fi
-# mswin gdb is not really gdbtk, but is close enough for now.
-
-gdbtk_files="gdbtk.c gdbtk.tcl mswin"
+gdbtk_files="README.GDBTK gdbtk.c gdbtcl gdbtk.tcl"
if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
lose_these_too="${gdbtk_files} ${lose_these_too}"
fi
fi
+# WinGDB files are not really ready to be part of FSF releases, but
+# keep them for progressives and such.
+
+mswin_files="mswin"
+
+if ( echo $* | grep lose\-mswin > /dev/null ) ; then
+ lose_these_too="${mswin_files} ${lose_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Deleting ${mswin_files}
+ fi
+else
+ keep_these_too="${mswin_files} ${keep_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Keeping ${mswin_files}
+ fi
+fi
+
+gm_files="gmagic.c gmagic.h"
+
+if ( echo $* | grep keep\-gm > /dev/null ) ; then
+ keep_these_too="${gm_files} ${keep_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Keeping ${gm_files}
+ fi
+else
+ lose_these_too="${gm_files} ${lose_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Deleting ${gm_files}
+ fi
+fi
+
+tic80_files="tic80-tdep.c"
+
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+ keep_these_too="${tic80_files} ${keep_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Keeping ${tic80_files}
+ fi
+else
+ lose_these_too="${tic80_files} ${lose_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Deleting ${tic80_files}
+ fi
+fi
+
+v850_files="v850ice.c v850-tdep.c"
+
+if ( echo $* | grep keep\-v850 > /dev/null ) ; then
+ keep_these_too="${v850_files} ${keep_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Keeping ${v850_files}
+ fi
+else
+ lose_these_too="${v850_files} ${lose_these_too}"
+ if [ -n "${verbose}" ] ; then
+ echo Deleting ${v850_files}
+ fi
+fi
+
# All files listed between the "Things-to-keep:" line and the
# "Files-to-sed:" line will be kept. All other files will be removed.
# Directories listed in this section will have their own Sanitize
Things-to-keep:
-.gdbinit
29k-share
COPYING
ChangeLog
ChangeLog-92
ChangeLog-93
ChangeLog-94
+ChangeLog-95
+ChangeLog-96
Makefile.in
NEWS
README
TODO
a29k-tdep.c
a68v-nat.c
+abug-rom.c
+aclocal.m4
+acconfig.h
alpha-nat.c
alpha-tdep.c
altos-xdep.c
arm-convert.s
arm-tdep.c
arm-xdep.c
-array-rom.c
+bcache.c
+bcache.h
blockframe.c
breakpoint.c
breakpoint.h
c-typeprint.c
c-valprint.c
call-cmds.h
-ch-exp.y
+ch-exp.c
ch-lang.c
ch-lang.h
ch-typeprint.c
complaints.c
complaints.h
config
+config.in
+configure
+configure.host
configure.in
+configure.tgt
convex-tdep.c
convex-xdep.c
copying.awk
copying.c
+core-aout.c
+core-regset.c
core-sol2.c
-core-svr4.c
-core.c
-coredep.c
+corefile.c
corelow.c
cp-valprint.c
+cpu32bug-rom.c
cxux-nat.c
+d10v-tdep.c
+dbug-rom.c
dbxread.c
dcache.c
dcache.h
+debugify.h
+debugify.c
defs.h
delta68-nat.c
demangle.c
doc
dpx2-nat.c
+dsrec.c
dst.h
dstread.c
+dwarf2read.c
dwarfread.c
elfread.c
environ.c
environ.h
eval.c
exec.c
+exc_request.defs
expprint.c
expression.h
f-exp.y
findvar.c
fork-child.c
frame.h
-gcc.patch
+gdb_stat.h
+gdb_string.h
gdb-stabs.h
gdb.1
+gdb.gdb
gdba.el
gdbcmd.h
gdbcore.h
+gdbinit.in
gdbserver
+gdbthread.h
gdbtypes.c
gdbtypes.h
+gnu-nat.c
+gnu-nat.h
+gnu-regex.c
+gnu-regex.h
go32-xdep.c
gould-tdep.c
gould-xdep.c
hppa-tdep.c
hppab-nat.c
hppah-nat.c
+hppam3-nat.c
hpread.c
+hpux-thread.c
i386-stub.c
i386-tdep.c
i386aix-nat.c
i386b-nat.c
+i386gnu-nat.c
i386ly-tdep.c
i386m3-nat.c
i386mach-nat.c
irix4-nat.c
irix5-nat.c
isi-xdep.c
+java-exp.y
+java-lang.c
+java-lang.h
+java-valprint.c
kdb-start.c
language.c
language.h
m2-typeprint.c
m2-valprint.c
m3-nat.c
+m32r-rom.c
+m32r-stub.c
+m32r-tdep.c
m68k-stub.c
m68k-tdep.c
+m68knbsd-nat.c
m88k-nat.c
m88k-tdep.c
+mac-defs.h
+mac-xdep.c
+mac-gdb.r
+mac-nat.c
main.c
maint.c
mdebugread.c
mipsm3-nat.c
mipsv4-nat.c
mipsread.c
+mn10200-tdep.c
+mn10300-tdep.c
+mon960-rom.c
monitor.h
monitor.c
+mpw-config.in
+mpw-make.sed
+msg.defs
+msg_reply.defs
news-xdep.c
nindy-share
nindy-tdep.c
nlm
nlmread.c
+notify.defs
ns32k-tdep.c
ns32km3-nat.c
objfiles.c
objfiles.h
op50-rom.c
os9kread.c
+osf-share
osfsolib.c
parse.c
parser-defs.h
partial-stab.h
+ppcbug-rom.c
printcmd.c
+process_reply.defs
procfs.c
ptx4-nat.c
pyr-tdep.c
pyr-xdep.c
-regex.c
-regex.h
-rem-multi.shar
remote-adapt.c
+remote-array.c
remote-bug.c
remote-e7000.c
remote-eb.c
remote-mips.c
remote-mm.c
remote-nindy.c
+remote-nrom.c
remote-os9k.c
-remote-pa.c
+remote-rdp.c
remote-sim.c
-remote-sim.h
remote-st.c
remote-udi.c
remote-utils.c
remote-vx29k.c
remote-vx68.c
remote-vx960.c
-remote-z8k.c
+remote-vxmips.c
+remote-vxsparc.c
+remote-wiggler.c
remote.c
+reply_mig_hack.awk
rs6000-nat.c
rs6000-tdep.c
rom68k-rom.c
saber.suppress
+scm-exp.c
+scm-lang.c
+scm-lang.h
+scm-tags.h
+scm-valprint.c
ser-e7kpc.c
ser-go32.c
+ser-mac.c
ser-tcp.c
ser-unix.c
serial.c
serial.h
+sh-stub.c
sh-tdep.c
+sh3-rom.c
signals.h
+sol-thread.c
solib.c
solib.h
somread.c
sparc-tdep.c
sparcl-stub.c
sparcl-tdep.c
-sparclite
+sparclet-rom.c
+sparclet-stub.c
+srec.h
stabsread.c
stabsread.h
stack.c
terminal.h
testsuite
thread.c
-thread.h
top.c
top.h
typeprint.c
vx-share
w65-tdep.c
w89k-rom.c
+win32-nat.c
xcoffread.c
xcoffsolib.c
xcoffsolib.h
+xmodem.c
+xmodem.h
z8k-tdep.c
-
# Things which are explicitly *not* kept, for now.
-# energize - Part of Lucid support.
-# energize-patches - Part of Lucid support.
-# energize.c - Part of Lucid support.
-# energize.h - Part of Lucid support.
-# remote-sa.sparc.c - Remote target for a standalone SPARC, using
-# the FORTH console ROMs. We never got the paperwork
-# straight, since Sun's lawyers messed with the
-# FSF contract and RMS didn't accept the changes.
-# Written at SunLabs.
-# state.c - Not used at the moment, keep for reference (fnf)
-# state.h - Not used at the moment, keep for reference (fnf)
Things-to-lose:
-energize
-energize-patches
-energize.c
-energize.h
-remote-mon.c
-remote-sa.sparc.c
ser-go32-para.c
-state.c
-state.h
-arc-tdep.c
-remote-arc.c
+HOW_TO_RELEASE
Do-last:
-echo Removing traces of \"mpw\"...
-
# Don't try to clean directories here, as the 'mv' command will fail.
# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-mpw > /dev/null ) ; then
+if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
+ echo Catering to RMS by removing traces of \"gdbtk\"...
for i in * ; do
- if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
- echo Keeping mpw stuff in $i
+ if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
+ echo Removing traces of \"gdbtk\" out of $i...
+ cp $i new
+ sed '/start\-sanitize\-gdbtk/,/end-\sanitize\-gdbtk/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ echo Caching $i in .Recover...
+ mv $i .Recover
+ fi
+ mv new $i
fi
done
else
+ echo Leaving \"gdbtk\" in the sources...
for i in * ; do
- if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
- echo Removing traces of \"mpw\" out of $i...
+ if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
+ echo Keeping \"gdbtk\" stuff in $i, but editing out sanitize lines...
cp $i new
- sed '/start\-sanitize\-mpw/,/end-\sanitize\-mpw/d' < $i > new
+ sed -e '/start\-sanitize\-gdbtk/d' -e '/end\-sanitize\-gdbtk/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
echo Caching $i in .Recover...
mv $i .Recover
done
fi
-echo Catering to RMS by removing traces of \"gdbtk\"...
+arc_files="configure.tgt ChangeLog-95"
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-gdbtk > /dev/null ) ; then
+if ( echo $* | grep keep\-arc > /dev/null ) ; then
+ for i in $arc_files ; do
+ if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping arc stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $arc_files ; do
+ if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"arc\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+if ( echo $* | grep keep\-gm > /dev/null ) ; then
for i in * ; do
- if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
- echo Keeping gdbtk stuff in $i
+ if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping gm stuff in $i
+ fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
- echo Removing traces of \"gdbtk\" out of $i...
+ if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"gm\" from $i...
+ fi
cp $i new
- sed '/start\-sanitize\-gdbtk/,/end-\sanitize\-gdbtk/d' < $i > new
+ sed '/start\-sanitize\-gm/,/end-\sanitize\-gm/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- echo Caching $i in .Recover...
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
mv $i .Recover
fi
mv new $i
done
fi
-r16_files="configure.in"
+if ( echo $* | grep keep\-v850 > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping v850 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"v850\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
-if ( echo $* | grep keep\-r16 > /dev/null ) ; then
- for i in $r16_files ; do
- if test ! -d $i && (grep sanitize-r16 $i > /dev/null) ; then
+if ( echo $* | grep keep\-sh4 > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping r16 stuff in $i
+ echo Keeping sh4 stuff in $i
fi
fi
done
else
- for i in $r16_files ; do
- if test ! -d $i && (grep sanitize-r16 $i > /dev/null) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"r16\" from $i...
+ echo Removing traces of \"sh4\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-r16/,/end-\sanitize\-r16/d' < $i > new
+ sed '/start\-sanitize\-sh4/,/end-\sanitize\-sh4/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-arc_files="configure.in ChangeLog"
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping r5900 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"r5900\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
- for i in $arc_files ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+if ( echo $* | grep keep\-tx39 > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tx39 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping arc stuff in $i
+ echo Keeping tx39 stuff in $i
fi
fi
done
else
- for i in $arc_files ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tx39 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"arc\" from $i...
+ echo Removing traces of \"tx39\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+ sed '/start\-sanitize\-tx39/,/end-\sanitize\-tx39/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tic80 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tic80\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tic80/,/end-\sanitize\-tic80/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...