+2002-04-05 Michael Snyder <msnyder@redhat.com>
+
+ * cli/cli-dump.c (restore_section_callback): Use paddr_nz.
+
+2002-04-05 H.J. Lu (hjl@gnu.org)
+
+ * solib-svr4.c (bkpt_names): Add "__start".
+
+2002-04-04 Andrew Cagney <ac131313@redhat.com>
+
+ * sparc-tdep.c (sparc_push_dummy_frame): Use GDB_TARGET_IS_SPARC64
+ as test for 64 bit target.
+
+2002-04-05 Andrew Cagney <ac131313@redhat.com>
+
+ * h8500-tdep.c (h8500_write_fp): Delete function.
+ * dwarf2cfi.c (cfi_write_fp): Document as not used.
+ * mips-tdep.c (mips_gdbarch_init): Do not set write_fp.
+ * ia64-tdep.c (ia64_gdbarch_init): Do not set write_fp.
+ * m68hc11-tdep.c (m68hc11_gdbarch_init): Do not set write_fp.
+ * rs6000-tdep.c (rs6000_gdbarch_init): Do not set write_fp.
+ * s390-tdep.c (s390_gdbarch_init): Do not set write_fp.
+ (s390_write_fp):
+ * sh-tdep.c (sh_gdbarch_init): Do not set write_fp.
+ * x86-64-tdep.c (i386_gdbarch_init): Do not set write_fp.
+ * d10v-tdep.c (d10v_gdbarch_init): Do not set write_fp.
+ (d10v_write_fp): Delete function.
+ * inferior.h (write_fp, generic_target_write_fp): Delete
+ declarations.
+ * regcache.c (generic_target_write_fp): Delete function.
+ (write_fp): Delete function.
+ * gdbarch.sh (TARGET_WRITE_FP): Delete.
+ * gdbarch.h, gdbarch.c: Regenerate.
+ * config/v850/tm-v850.h (TARGET_WRITE_FP): Delete macro.
+ * config/sparc/tm-sp64.h (TARGET_WRITE_FP): Delete macro.
+ (sparc64_write_fp): Delete declaration.
+ * config/h8500/tm-h8500.h (TARGET_WRITE_FP): Delete macro.
+ (h8500_write_fp): Delete declaration.
+
+2002-04-04 Andrew Cagney <ac131313@redhat.com>
+
+ * sparc-tdep.c (sparc64_write_fp): Delete.
+ (sparc_push_dummy_frame): Replace write_fp call with code to store
+ the FP directly.
+ (sparc_gdbarch_init): Do not initialize write_fp.
+
+2002-04-05 Kevin Buettner <kevinb@redhat.com>
+
+ * rs6000-tdep.c (skip_prologue): Eliminate unused/unreachable
+ clause.
+
+2002-03-29 Jim Blandy <jimb@redhat.com>
+
+ * stack.c (get_selected_block): Add new argument `addr_in_block',
+ used to return the exact code address we used to select the block,
+ not just the block.
+ * blockframe.c (get_frame_block, get_current_block): Same.
+ * frame.h (get_frame_block, get_current_block,
+ get_selected_block): Update declarations.
+ * linespec.c, stack.c, blockframe.c, breakpoint.c, findvar.c,
+ linespec.c, varobj.c, printcmd.c, symtab.c: Callers changed.
+
+2002-04-05 Michael Snyder <msnyder@redhat.com>
+
+ * breakpoint.c (insert_breakpoints): Change 'hw' to 'hardware in
+ warning message.
+
+2002-04-05 J. Brobecker <brobecker@gnat.com>
+
+ * utils.c (xfullpath): New function.
+ * defs.h (xfullpath): Add declaration.
+ * source.c (openp): Use xfullpath in place of gdb_realpath to
+ avoid resolving the basename part of filenames when the
+ associated file is a symbolic link. This fixes a potential
+ inconsistency between the filenames known to GDB and the
+ filenames it prints in the annotations.
+ * symtab.c (lookup_symtab): Use the new xfullpath function, in order
+ to be able to match a filename with either the real filename, or
+ the name of any symbolic link to this file.
+ (lookup_partial_symtab): Ditto.
+
+2002-04-04 Michael Snyder <msnyder@redhat.com>
+
+ * breakpoint.c: Add support for hardware breakpoints in overlays.
+ (overlay_events_enabled): New state variable.
+ (insert_breakpoints): Use overlay_events_enabled to decide
+ whether to attempt to set a breakpoint at the overlay load addr.
+ Handle bp_hardware_breakpoint as well as bp_breakpoint.
+ (remove_breakpoint): Use overlay_events_enabled to decide
+ whether breakpoints need to be removed from overlay load addr.
+ Handle bp_hardware_breakpoint as well as bp_breakpoint.
+ (bpstat_stop_status): Handle bp_hardware_breakpoint in overlays.
+ (create_overlay_event_breakpoint, enable_overlay_breakpoints,
+ disable_overlay_breakpoints): Update overlay_events_enabled.
+
+2002-04-04 Daniel Jacobowitz <drow@mvista.com>
+
+ * dwarf2read.c (struct function_range): New.
+ (cu_first_fn, cu_last_fn, cu_cached_fn): New.
+ (check_cu_functions): New.
+ (read_file_scope): Initialize global function lists.
+ Call dwarf_decode_line after processing children.
+ (read_func_scope): Add to global function list.
+ (dwarf_decode_lines): Call check_cu_functions everywhere
+ record_line is called. Call record_line with a linenumber
+ of 0 to mark sequence ends.
+
+2002-04-04 Michal Ludvig <mludvig@suse.cz>
+
+ * x86-64-linux-nat.c (child_xfer_memory): x86-64 ptrace() ABI
+ change sync with glibc.
+
+2002-04-03 Jim Blandy <jimb@redhat.com>
+
+ * configure.in: Call AC_C_INLINE.
+ * configure: Regenerated.
+
+2002-04-01 Daniel Jacobowitz <drow@mvista.com>
+
+ * rs6000-tdep.c: Change #include of "bfd/libcoff.h"
+ and "bfd/libbfd.h" to "libcoff.h" and "libbfd.h".
+
+2002-03-31 Mark Kettenis <kettenis@gnu.org>
+
+ * NEWS: Mention gcore support on FreeBSD/i386.
+
+ * fbsd-proc.c: New file.
+ * config/i386/nm-fbsd.h (CHILD_PID_TO_EXEC_FILE): Define.
+ * config/i386/fbsd.mh (NATDEPFILES): Add gcore.o and fbsd-proc.o.
+
+ * lin-lwp.c (child_wait): Check SAVE_ERRNO instead of ERRNO in
+ while statement.
+
+2002-03-29 Jim Blandy <jimb@redhat.com>
+
+ * cli/cli-dump.c (_initialize_cli_dump): Older GCC's tolerate
+ unescaped newlines in string literals, but newer ones don't. So
+ escape them.
+
+2002-03-26 Michael Snyder <msnyder@redhat.com>
+ Andrew Cagney <cagney@redhat.com>
+
+ * cli/cli-dump.c: New file. Dump memory to file,
+ restore file to memory.
+ * cli/cli-dump.h: New file.
+ * Makefile.in: Add rules, dependencies for cli-dump.o.
+ * NEWS: Mention new commands.
+
+2002-03-28 Michael Snyder <msnyder@redhat.com>
+
+ * symfile.c (symbol_file_add): Move test for null symbols to later.
+
+2002-03-27 Andrew Cagney <ac131313@redhat.com>
+
+ From veksler at il.ibm.com:
+ * utils.c (gdb_realpath): If canonicalize_file_name fails, return
+ the xstrduped original path.
+ Fix PR gdb/417.
+
+2002-03-27 Michael Snyder <msnyder@redhat.com>
+
+ * breakpoint.c (_initialize_breakpoint): Clean up help string.
+ * infcmd.c (_initialize_infcmd): Ditto.
+ * language.c (_initialize_language): Ditto.
+ * symfile.c (_initialize_symfile): Ditto.
+ * top.c (_init_main): Ditto.
+ * cli/cli-cmds.c (init_cli_cmds): Ditto.
+
+2002-03-27 Elena Zannoni <ezannoni@redhat.com>
+
+ * rs6000-tdep.c (struct rs6000_framedata): Add fields for AltiVec
+ vector registers handling.
+ (skip_prologue): Handle new AltiVec instructions. Fill in new
+ fields of frame data.
+ (frame_get_saved_regs): Fill in information for AltiVec registers.
+
2002-03-27 Jim Blandy <jimb@redhat.com>
* symtab.h (SYMBOL_INIT_MANGLED_NAME): Turn this macro's body into
projects / deliverable / binutils-gdb.git / blobdiff