+2014-05-12 Simon Marchi <simon.marchi@ericsson.com>
+
+ * MAINTAINERS (Write After Approval): Add "Simon Marchi".
+
+2014-04-29 Tom Tromey <tromey@redhat.com>
+
+ * varobj.c (_initialize_varobj): Rename to "set debug varobj" and
+ "show debug varobj".
+
+2014-05-07 Kyle McMartin <kyle@redhat.com>
+
+ Pushed by Joel Brobecker <brobecker@adacore.com>.
+ * aarch64-tdep.c (aarch64_software_single_step): New function.
+ (aarch64_gdbarch_init): Handle single stepping of atomic sequences
+ with aarch64_software_single_step.
+
+2014-05-05 Joel Brobecker <brobecker@adacore.com>
+
+ GDB 7.7.1 released.
+
+2014-05-05 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (linespec_parse_basic): Run cleanups if a convenience
+ variable or history value is successfully parsed.
+
+2014-05-05 Yao Qi <yao@codesourcery.com>
+ Pedro Alves <palves@redhat.com>
+
+ * tracefile-tfile.c (tfile_xfer_partial): Record the lowest
+ address of blocks that intersects the requested range. Trim
+ LEN up to LOW_ADDR_AVAILABLE if read from executable read-only
+ sections.
+ * ctf.c (ctf_xfer_partial): Likewise.
+
+2014-05-05 Yao Qi <yao@codesourcery.com>
+
+ * printcmd.c (display_command): Remove the check to
+ target_has_execution.
+
+2014-05-03 Mark Kettenis <kettenis@gnu.org>
+
+ * ppcobsd-nat.c: Include "obsd-nat.h".
+ (_initialize_ppcobsd_nat): Call obsd_add_target instead of
+ add_target.
+ * config/powerpc/obsd.mh (NATDEPFILES): Add obsd-nat.o.
+
+2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * stap-probe.c (enum stap_arg_bitness): New enums to represent 8
+ and 16-bit signed and unsigned arguments. Update comment.
+ (stap_parse_probe_arguments): Extend code to handle such
+ arguments. Use warning instead of complaint to notify about
+ unrecognized bitness.
+
+2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ PR breakpoints/16889
+ * stap-probe.c (stap_parse_probe_arguments): Simplify
+ check for non-prefixed probes (i.e., probes whose
+ arguments do not start with "N@"). Always set the
+ argument type to a sane value.
+
+2014-05-01 David Taylor <dtaylor@emc.com>
+
+ * remote.c (compare_sections_command): Add -r option to compare
+ all loadable read-only sections.
+
+2014-04-30 Siva Chandra Reddy <sivachandra@google.com>
+
+ * dwarf2loc.c (dwarf2_locexpr_baton_eval,
+ dwarf2_evaluate_property): Remove unused CORE_ADDR argument.
+ Update all callers.
+ * dwarf2loc.h (dwarf2_evaluate_property): Update signature.
+ * gdbtypes.c (resolve_dynamic_range, resolve_dynamic_array):
+ Remove unused CORE_ADDR argument. Update all callers.
+
+2014-04-29 Pedro Alves <palves@redhat.com>
+
+ * remote.c (struct packet_config) <detect>: Extend comment.
+ (add_packet_config_cmd): Don't set the config's detect or support
+ fields here.
+ (init_all_packet_configs): Also initialize the config's 'detect'
+ field.
+ (reset_all_packet_configs_support): New function.
+ (remote_open_1): Call reset_all_packet_configs_support instead of
+ init_all_packet_configs.
+ (_initialize_remote): Initialize all packet configs. Assert that
+ all packets have an associated command, except a few known
+ outliers.
+
+2014-04-28 Joel Brobecker <brobecker@adacore.com>
+
+ * dwarf2read.c (read_subrange_type): Handle dynamic
+ DW_AT_lower_bound attributes.
+
+2014-04-28 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (ada_discrete_type_high_bound): Resolve the type's
+ dynamic bounds before computing its upper bound.
+ (ada_discrete_type_low_bound): Same as above with the lower bound.
+
+2014-04-28 Joel Brobecker <brobecker@adacore.com>
+
+ * dwarf2read.c (is_dynamic_type): Return true for dynamic
+ range types. Adjust the array handling implementation to
+ take advantage of this change.
+ (resolve_dynamic_range): New function, mostly extracted from
+ resolve_dynamic_bounds.
+ (resolve_dynamic_array): New function, mostly extracted from
+ resolve_dynamic_bounds.
+ (resolve_dynamic_bounds): Delete.
+ (resolve_dynamic_type): Reimplement. Add handling of
+ TYPE_CODE_RANGE types.
+
+2014-04-28 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-varobj.c (ada_varobj_describe_simple_array_child): Remove
+ handling of parallel ___XA types.
+
+2014-04-28 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Remove
+ unnecessary second call to static_unwrap_type.
+
+2014-04-27 Hui Zhu <hui@codesourcery.com>
+
+ * stack.c (print_frame_info): Call do_gdb_disassembly with
+ DUMMY_FRAME, SIGTRAMP_FRAME and ARCH_FRAME.
+
+2014-04-26 Doug Evans <xdje42@gmail.com>
+
+ * guile/scm-safe-call.c (scscm_eval_scheme_string): Fix comment.
+
+2014-04-25 Pedro Alves <palves@redhat.com>
+
+ PR server/16255
+ * common/linux-ptrace.c (linux_ptrace_attach_warnings): Rename to ...
+ (linux_ptrace_attach_fail_reason): ... this. Remove "warning: "
+ and newline from built string.
+ * common/linux-ptrace.h (linux_ptrace_attach_warnings): Rename to ...
+ (linux_ptrace_attach_fail_reason): ... this.
+ * linux-nat.c (linux_nat_attach): Adjust to use
+ linux_ptrace_attach_fail_reason.
+
+2014-04-25 Pedro Alves <palves@redhat.com>
+
+ * remote.c (struct remote_state): Remove multi_process_aware,
+ non_stop_aware, cond_tracepoints, cond_breakpoints,
+ breakpoint_commands, fast_tracepoints, static_tracepoints,
+ install_in_trace, disconnected_tracing,
+ enable_disable_tracepoints, string_tracing, and
+ augmented_libraries_svr4_read fields.
+ (remote_multi_process_p): Move further below in the file.
+ (struct packet_config): Add comments.
+ (update_packet_config): Delete function.
+ (show_packet_config_cmd): Use packet_config_support.
+ (add_packet_config_cmd): Use NULL as set callback.
+ (packet_ok): "set remote foo-packet"-style commands no longer
+ change config->supported -- adjust.
+ (PACKET_ConditionalTracepoints, PACKET_ConditionalBreakpoints)
+ (PACKET_BreakpointCommands, PACKET_FastTracepoints)
+ (PACKET_StaticTracepoints, PACKET_InstallInTrace): Add comments.
+ (PACKET_QNonStop, PACKET_multiprocess_feature)
+ (PACKET_EnableDisableTracepoints_feature, PACKET_tracenz_feature)
+ (PACKET_DisconnectedTracing_feature)
+ (PACKET_augmented_libraries_svr4_read_feature): New enum values.
+ (set_remote_protocol_packet_cmd): Delete function.
+ (packet_config_support, packet_support): New functions.
+ (set_remote_protocol_Z_packet_cmd): Don't call
+ update_packet_config.
+ (remote_query_attached, remote_pass_signals)
+ (remote_program_signals, remote_threads_info)
+ (remote_threads_extra_info, remote_start_remote): Use
+ packet_support.
+ (remote_start_remote): Use packet_config_support and
+ packet_support.
+ (init_all_packet_configs): Set all packets to unknown support,
+ instead of calling update_packet_config.
+ (remote_check_symbols): Use packet_support.
+ (remote_supported_packet): Unconditionally set the packet config's
+ support status.
+ (remote_multi_process_feature, remote_non_stop_feature)
+ (remote_cond_tracepoint_feature, remote_cond_breakpoint_feature)
+ (remote_breakpoint_commands_feature)
+ (remote_fast_tracepoint_feature, remote_static_tracepoint_feature)
+ (remote_install_in_trace_feature)
+ (remote_disconnected_tracing_feature)
+ (remote_enable_disable_tracepoint_feature)
+ (remote_string_tracing_feature)
+ (remote_augmented_libraries_svr4_read_feature): Delete functions.
+ (remote_protocol_features): Adjust to use remote_supported_packet
+ for "augmented-libraries-svr4-read", "multiprocess", "QNonStop",
+ "ConditionalTracepoints", "ConditionalBreakpoints",
+ "BreakpointCommands", "FastTracepoints", "StaticTracepoints",
+ "InstallInTrace", "DisconnectedTracing", "DisconnectedTracing",
+ "EnableDisableTracepoints", and "tracenz".
+ (remote_query_supported): Use packet_support.
+ (remote_open_1): Adjust.
+ (extended_remote_attach_1): Use packet_support. Switch on the
+ result of packet_ok instead of checking whether the packet ended
+ up disabled.
+ (remote_vcont_resume): Use packet_support.
+ (remote_resume, remote_stop_ns, fetch_register_using_p)
+ (remote_prepare_to_store, store_register_using_P)
+ (check_binary_download, remote_write_bytes): Use packet_support.
+ (remote_vkill): Use packet_support. Switch on the result of
+ packet_ok instead of checking whether the packet ended up
+ disabled.
+ (extended_remote_supports_disable_randomization): Use
+ packet_support.
+ (extended_remote_run): Switch on the result of packet_ok instead
+ of checking whether the packet ended up disabled.
+ (remote_insert_breakpoint, remote_remove_breakpoint)
+ (remote_insert_watchpoint, remote_remove_watchpoint)
+ (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Use
+ packet_support.
+ (remote_search_memory): Use packet_config_support.
+ (remote_get_thread_local_address, remote_get_tib_address)
+ (remote_hostio_send_command, remote_can_execute_reverse): Use
+ packet_support.
+ (remote_supports_cond_tracepoints)
+ (remote_supports_cond_breakpoints)
+ (remote_supports_fast_tracepoints)
+ (remote_supports_static_tracepoints)
+ (remote_supports_install_in_trace)
+ (remote_supports_enable_disable_tracepoint)
+ (remote_supports_string_tracing)
+ (remote_can_run_breakpoint_commands): Rewrite, checking whether
+ the packet config says the feature is enabled or disabled.
+ (remote_download_tracepoint, remote_trace_set_readonly_regions)
+ (remote_get_trace_status): Use packet_support.
+ (remote_set_disconnected_tracing): Adjust to check whether the
+ feature is enabled with packet_support.
+ (remote_set_trace_buffer_size, remote_use_agent)
+ (remote_can_use_agent, remote_supports_btrace): Use
+ packet_support.
+ (remote_enable_btrace, remote_disable_btrace, remote_read_btrace):
+ Use packet_config_support.
+ (remote_augmented_libraries_svr4_read): Rewrite, checking whether
+ the packet config says the feature is enabled or disabled.
+ (set_range_stepping): Use packet_support.
+
+2014-04-25 Tom Tromey <tromey@redhat.com>
+
+ * cli/cli-cmds.c (_initialize_cli_cmds): Document "quit" command's
+ argument.
+
+2014-04-24 Sanimir Agovic <sanimir.agovic@intel.com>
+
+ * NEWS: Mention support for C99 variable length arrays.
+
+2014-04-24 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (standard_exc): Expand introductory comment.
+
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>