+2016-01-19 John Baldwin <jhb@FreeBSD.org>
+
+ * configure.ac: Include <sys/types.h when checking for "r_fs" in
+ "struct reg".
+ * configure: Regenerate.
+
+2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
+
+ * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
+ instruction support.
+ (micromips_next_pc): Likewise.
+ (micromips_scan_prologue): Likewise.
+ (micromips_deal_with_atomic_sequence): Likewise.
+ (micromips_stack_frame_destroyed_p): Likewise.
+ (mips_breakpoint_from_pc): Likewise.
+
+2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
+
+ * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
+ unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
+
+2016-01-18 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention that GDB now displays the ID and name of the
+ thread that hit a breakpoint or received a signal.
+ * break-catch-sig.c (signal_catchpoint_print_it): Use
+ maybe_print_thread_hit_breakpoint.
+ * break-catch-syscall.c (print_it_catch_syscall): Likewise.
+ * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
+ * breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
+ (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
+ (print_it_catch_exec, print_it_ranged_breakpoint)
+ (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
+ Use maybe_print_thread_hit_breakpoint.
+ * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
+ * gdbthread.h (show_thread_that_caused_stop): Declare.
+ * infrun.c (print_signal_received_reason): Print which thread
+ received signal.
+ * thread.c (show_thread_that_caused_stop): New function.
+
+2016-01-18 Gary Benson <gbenson@redhat.com>
+
+ * nat/linux-namespaces.c (do_fork): New function.
+ (linux_mntns_get_helper): Use the above.
+
+2016-01-17 Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de> (tiny change)
+
+ Pushed by Joel Brobecker <brobecker@adacore.com>.
+ PR gdb/19208
+ * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
+ if the function has no name.
+
+2016-01-15 Sandra Loosemore <sandra@codesourcery.com>
+
+ * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
+ Conditionalize for Windows host.
+ (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
+ (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
+ (phony_iconv_open): Handle both UTF-32 endiannesses.
+ (phony_iconv): Likewise. Check for output overflow and clean up
+ out-of-input cases. Correct adjustment to input buffer pointer.
+ (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
+ phony_iconv_open.
+
+2016-01-15 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention star wildcard ranges.
+ * cli/cli-utils.c (get_number_or_range): Check state->in_range first.
+ (number_range_setup_range): New function.
+ * cli/cli-utils.h (number_range_setup_range): New declaration.
+ * thread.c (thread_apply_command): Support star TID ranges.
+ * tid-parse.c (tid_range_parser_finished)
+ (tid_range_parser_string, tid_range_parser_skip)
+ (get_tid_or_range, get_tid_or_range): Handle
+ TID_RANGE_STATE_STAR_RANGE.
+ (tid_range_parser_star_range): New function.
+ * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
+ New value.
+ (tid_range_parser_star_range): New declaration.
+
+2016-01-15 Pedro Alves <palves@redhat.com>
+
+ * thread.c (thread_apply_command): Use the tid range parser to
+ advance past the thread ID list.
+ * tid-parse.c (get_positive_number_trailer): New function.
+ (parse_thread_id): Use it.
+ (get_tid_or_range): Use it. Return 0 instead of throwing invalid
+ thread ID error.
+ (get_tid_or_range): Detect negative values. Return 0 instead of
+ throwing invalid thread ID error.
+
+2016-01-14 Yao Qi <yao.qi@linaro.org>
+
+ * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
+ Declare.
+ (arm_linux_get_next_pcs_ops): Install
+ arm_linux_get_next_pcs_syscall_next_pc.
+ (arm_linux_syscall_next_pc): Change to ...
+ (arm_linux_get_next_pcs_syscall_next_pc): ... it.
+ (arm_linux_init_abi): Don't set tdep->syscall_next_pc.
+ * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
+ (arm_get_next_pcs_syscall_next_pc): Make it static. Don't
+ call tdep->syscall_next_pc.
+ * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
+ (arm_get_next_pcs_syscall_next_pc): Remove.
+
+2016-01-14 Yao Qi <yao.qi@linaro.org>
+
+ * remote.c (remote_set_syscall_catchpoint): Cast to char *.
+ * thread.c (do_captured_thread_select): Cast to const char *.
+
+2016-01-14 Yao Qi <yao.qi@linaro.org>
+
+ * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
+ argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
+ (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
+ instead.
+ * arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
+ <arm_thumb2_breakpoint>: Remove.
+ <has_thumb2_breakpoint>: New field.
+ (arm_get_next_pcs_ctor): Update declaration.
+ * arm-linux-tdep.c (arm_linux_software_single_step): Pass
+ 1 to arm_get_next_pcs_ctor.
+ * arm-tdep.c (arm_software_single_step): Pass 0 to
+ arm_get_next_pcs_ctor.
+
+2016-01-13 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
+
+2016-01-13 Yao Qi <yao.qi@linaro.org>
+
+ * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
+ byte_order_for_code to read instruction.
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention $_gthread.
+ * gdbthread.h (struct thread_info) <global_num>: Mention
+ $_gthread.
+ * thread.c (thread_num_make_value_helper): New function.
+ (thread_id_make_value): Delete.
+ (thread_id_per_inf_num_make_value, global_thread_id_make_value):
+ New.
+ (thread_funcs): Adjust.
+ (gthread_funcs): New.
+ (_initialize_thread): Register $_gthread variable.
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention "info threads -gid".
+ * gdbthread.h (struct thread_info) <global_num>: Mention "info
+ threads -gid".
+ * thread.c (info_threads_command): Handle "-gid".
+ (_initialize_thread): Adjust "info threads" help string to mention
+ -gid.
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention InferiorThread.global_num.
+ * python/py-infthread.c (thpy_get_global_num): New function.
+ (thread_object_getset): Register "global_num".
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention that thread IDs are now per inferior and global
+ thread IDs.
+ * Makefile.in (SFILES): Add tid-parse.c.
+ (COMMON_OBS): Add tid-parse.o.
+ (HFILES_NO_SRCDIR): Add tid-parse.h.
+ * ada-tasks.c: Adjust to use ptid_to_global_thread_id.
+ * breakpoint.c (insert_breakpoint_locations)
+ (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
+ (print_one_breakpoint_location, set_longjmp_breakpoint)
+ (check_longjmp_breakpoint_for_call_dummy)
+ (set_momentary_breakpoint): Adjust to use global IDs.
+ (find_condition_and_thread, watch_command_1): Use parse_thread_id.
+ (until_break_command, longjmp_bkpt_dtor)
+ (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
+ to use global IDs.
+ * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
+ ptid_to_global_thread_id.
+ * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
+ * gdbthread.h (struct thread_info): Rename field 'num' to
+ 'global_num. Add new fields 'per_inf_num' and 'inf'.
+ (thread_id_to_pid): Rename thread_id_to_pid to
+ global_thread_id_to_ptid.
+ (pid_to_thread_id): Rename to ...
+ (ptid_to_global_thread_id): ... this.
+ (valid_thread_id): Rename to ...
+ (valid_global_thread_id): ... this.
+ (find_thread_id): Rename to ...
+ (find_thread_global_id): ... this.
+ (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
+ (print_thread_info): Add comment.
+ * tid-parse.h: New file.
+ * tid-parse.c: New file.
+ * infcmd.c (step_command_fsm_prepare)
+ (step_command_fsm_should_stop): Adjust to use the global thread
+ ID.
+ (until_next_command, until_next_command)
+ (finish_command_fsm_should_stop): Adjust to use the global thread
+ ID.
+ (attach_post_wait): Adjust to check the inferior number too.
+ * inferior.h (struct inferior) <highest_thread_num>: New field.
+ * infrun.c (handle_signal_stop)
+ (insert_exception_resume_breakpoint)
+ (insert_exception_resume_from_probe): Adjust to use the global
+ thread ID.
+ * record-btrace.c (record_btrace_open): Use global thread IDs.
+ * remote.c (process_initial_stop_replies): Also consider the
+ inferior number.
+ * target.c (target_pre_inferior): Clear the inferior's highest
+ thread num.
+ * thread.c (clear_thread_inferior_resources): Adjust to use the
+ global thread ID.
+ (new_thread): New inferior parameter. Adjust to use it. Set both
+ the thread's global ID and the thread's per-inferior ID.
+ (add_thread_silent): Adjust.
+ (find_thread_global_id): New.
+ (find_thread_id): Make static. Adjust to rename.
+ (valid_thread_id): Rename to ...
+ (valid_global_thread_id): ... this.
+ (pid_to_thread_id): Rename to ...
+ (ptid_to_global_thread_id): ... this.
+ (thread_id_to_pid): Rename to ...
+ (global_thread_id_to_ptid): ... this. Adjust.
+ (first_thread_of_process): Adjust.
+ (do_captured_list_thread_ids): Adjust to use global thread IDs.
+ (should_print_thread): New function.
+ (print_thread_info): Rename to ...
+ (print_thread_info_1): ... this, and add new show_global_ids
+ parameter. Handle it. Iterate over inferiors.
+ (print_thread_info): Reimplement as wrapper around
+ print_thread_info_1.
+ (show_inferior_qualified_tids): New function.
+ (print_thread_id): Use it.
+ (tp_array_compar): Compare inferior numbers too.
+ (thread_apply_command): Use tid_range_parser.
+ (do_captured_thread_select): Use parse_thread_id.
+ (thread_id_make_value): Adjust.
+ (_initialize_thread): Adjust "info threads" help string.
+ * varobj.c (struct varobj_root): Update comment.
+ (varobj_create): Adjust to use global thread IDs.
+ (value_of_root_1): Adjust to use global_thread_id_to_ptid.
+ * windows-tdep.c (display_tib): No longer accept an argument.
+ * cli/cli-utils.c (get_number_trailer): Make extern.
+ * cli/cli-utils.h (get_number_trailer): Declare.
+ (get_number_const): Adjust documentation.
+ * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
+ thread IDs.
+ * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
+ (mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
+ * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
+ * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
+ Likewise.
+ * python/py-breakpoint.c (bppy_set_thread): Likewise.
+ * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
+ * python/py-infthread.c (thpy_get_num): Add comment and return the
+ per-inferior thread ID.
+ (thread_object_getset): Update comment of "num".
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ * breakpoint.c (remove_threaded_breakpoints)
+ (print_one_breakpoint_location): Use print_thread_id.
+ * btrace.c (btrace_enable, btrace_disable, btrace_teardown)
+ (btrace_fetch, btrace_clear): Use print_thread_id.
+ * common/print-utils.c (CELLSIZE): Delete.
+ (get_cell): Rename to ...
+ (get_print_cell): ... this and made extern. Adjust call callers.
+ Adjust to use PRINT_CELL_SIZE.
+ * common/print-utils.h (get_print_cell): Declare.
+ (PRINT_CELL_SIZE): New.
+ * gdbthread.h (print_thread_id): Declare.
+ * infcmd.c (signal_command): Use print_thread_id.
+ * inferior.c (print_inferior): Use print_thread_id.
+ * infrun.c (handle_signal_stop)
+ (insert_exception_resume_breakpoint)
+ (insert_exception_resume_from_probe)
+ (print_signal_received_reason): Use print_thread_id.
+ * record-btrace.c (record_btrace_info)
+ (record_btrace_resume_thread, record_btrace_cancel_resume)
+ (record_btrace_step_thread, record_btrace_wait): Use
+ print_thread_id.
+ * thread.c (thread_apply_all_command): Use print_thread_id.
+ (print_thread_id): New function.
+ (thread_apply_command): Use print_thread_id.
+ (thread_command, thread_find_command, do_captured_thread_select):
+ Use print_thread_id.
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention InferiorThread.inferior.
+ * python/py-infthread.c (thpy_get_inferior): New.
+ (thread_object_getset): Register "inferior".
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention $_inferior.
+ * inferior.c (inferior_id_make_value): New.
+ (inferior_funcs): New.
+ (_initialize_inferior): Create $_inferior variable.
+
+2016-01-13 Pedro Alves <palves@redhat.com>
+
+ PR breakpoints/19388
+ * frame.c (get_current_frame): Use validate_registers_access.
+ * gdbthread.h (validate_registers_access): Declare.
+ * infrun.c (validate_siginfo_access): Delete.
+ (siginfo_value_read, siginfo_value_write): Use
+ validate_registers_access.
+ * thread.c (validate_registers_access): New function.
+
+2016-01-12 Josh Stone <jistone@redhat.com>
+ Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
+ syscall_entry and syscall_return stop reasons. Mention GDB
+ support for remote catch syscall.
+ * remote.c (PACKET_QCatchSyscalls): New enum.
+ (remote_set_syscall_catchpoint): New function.
+ (remote_protocol_features): New element for QCatchSyscalls.
+ (remote_parse_stop_reply): Parse syscall_entry/return stops.
+ (init_remote_ops): Install remote_set_syscall_catchpoint.
+ (_initialize_remote): Config QCatchSyscalls.
+ * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
+
+2016-01-12 Yao Qi <yao.qi@linaro.org>
+
+ * nat/linux-ptrace.c (linux_child_function): Cast child_stack
+ to gdb_byte * and pass to linux_fork_to_function.
+
+2016-01-12 Yao Qi <yao.qi@linaro.org>
+
+ * nat/linux-ptrace.c (linux_fork_to_function): Change type
+ of argument 'function'.
+ (linux_grandchild_function): Change return type to 'int'.
+ Change child_stack's type to 'void *'.
+ (linux_child_function): Likewise.
+
+2016-01-12 Pedro Alves <palves@redhat.com>
+
+ Remove use of the registered trademark symbol throughout.
+
+2016-01-12 Thomas Schwinge <thomas@codesourcery.com>
+
+ * reply_mig_hack.awk: Rewrite one regular expression.
+
+2016-01-11 Mike Frysinger <vapier@gentoo.org>
+
+ * acinclude.m4: Include new warning.m4 file.
+ * configure: Regenerated.
+ * configure.ac: Move all warning logic ...
+ * warning.m4: ... here.
+
+2016-01-08 Yao Qi <yao.qi@linaro.org>
+
+ * extension.c: Include target.h.
+ (set_active_ext_lang): Only call install_gdb_sigint_handler,
+ check_quit_flag, and set_quit_flag if target_terminal_is_ours
+ returns false.
+ (restore_active_ext_lang): Likewise.
+ * target.c (target_terminal_is_ours): New function.
+ * target.h (target_terminal_is_ours): Declare.
+
+2016-01-07 Maciej W. Rozycki <macro@imgtec.com>
+
+ * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
+ to `err' in the little-endian leg.
+
+2016-01-06 Yao Qi <yao.qi@linaro.org>
+
+ * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
+ lines below.
+ (thumb_get_next_pcs_raw): Make it static.
+ (arm_get_next_pcs_raw): Likewise.
+ * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
+ declaration.
+ (arm_get_next_pcs_raw): Likewise.
+
2016-01-05 Mike Frysinger <vapier@gentoo.org>
* version.in: Change cvs to git.
projects / deliverable / binutils-gdb.git / blobdiff