+2007-11-15 Markus Deuling <deuling@de.ibm.com>
+
+ * arm-tdep.c (arm_prologue_this_id): Replace LOWEST_PC by its
+ expression and use get_frame_arch to replace current_gdbarch by frame's
+ architecture.
+ * arm-tdep.h (LOWEST_PC): Remove
+
+2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
+
+ Apply const qualifier to some users of bp_location.
+ * breakpoint.h (struct bpstats): Make
+ the breakpoint_at field point at const bp_location.
+ * breakpoint.c (bpstat_alloc): Accept const
+ bp_location.
+ (breakpoint_here_p, breakpoint_inserted_here_p)
+ (software_breakpoint_inserted_here_p)
+ (breakpoint_thread_match, bpstat_stop_status)
+ (read_memory_nobpt, bpstat_have_active_hw_watchpoints): Use
+ const bp_location for iteration.
+ (print_it_typical, print_bp_stop_message): Use
+ const bp_location variable.
+
+2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
+
+ Make mark_breakpoints_out static.
+ * breakpoint.h (mark_breakpoints_out): Remove
+ declaration.
+ * breakpoint.c (mark_breakpoints_out): Make static.
+
+2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
+
+ Prevent clear_command from directly modifying breakpoint list.
+ * Makefile.in (breakpoint_h): Update dependency.
+ * breakpoint.c (clear_command): Do not remove
+ breakpoints from breakpoint_chain. Collect breakpoints
+ to delete in a vector.
+ * breakpoint.h (breakpoint_p): New typedef for pointer to
+ breakpoint. Register vector of breakpoint_p.
+
+2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
+
+ Remove 'run_cleanup'.
+ * defs.h (do_run_cleanups, make_run_cleanup): Remove
+ declarations.
+ * infcmd.c (run_command_1): Call clear_solib instead
+ of do_run_cleanups.
+ * jv-lang.c (java_rerun_cleanup): Remove, for lack of
+ any use.
+ * solib.c (solib_cleanup_queued, do_clear_solib): Remove.
+ (update_solib_lib): Don't setup run cleanup.
+ (no_shared_libraries): Call clear_solib, not do_clear_solib.
+ * utils.c (run_cleanup_chain, make_run_cleanup)
+ (do_run_cleanups): Remove.
+
+2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
+
+ Remove CLEAR_SOLIB use.
+ * corelow.c (core_close): Don't check for CLEAR_SOLIB.
+ * infcmd.c (attach_command): Likewise.
+
+2007-11-14 Doug Evans <dje@google.com>
+
+ * buildsym.c (start_subfile,start_symtab): Doc fixes.
+
+2007-11-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
+
+ * tui/tui-data.c (tui_prev_win): Guard against NULL.
+
+2007-11-12 Markus Deuling <deuling@de.ibm.com>
+
+ * gdbarch.sh (gdbarch_alloc): Replace current_gdbarch by gdbarch. Remove
+ obsolete comment.
+ (verify_gdbarch, gdbarch_dump): Likewise.
+ (do_read): Update comment.
+ (addr_bit, bfd_arch_info, target_desc, long_long_bit, floatformat)
+ (ptr_bit, name_of_malloc): Replace current_gdbarch by gdbarch.
+ * gdbarch.{c,h}: Regenerate.
+
+2007-11-12 Markus Deuling <deuling@de.ibm.com>
+
+ * xtensa-tdep.c (ARG_1ST): Replace ARGS_FIRST_REG by its expression.
+ (ARGS_FIRST_REG): Remove.
+ (areg_numer): New function.
+ (xtensa_pseudo_register_read, xtensa_frame_prev_register)
+ (xtensa_extract_return_value, xtensa_store_return_value)
+ (xtensa_frame_cache): Replace AREG_NUMBER by areg_number.
+ (AREG_NUMBER): Remove.
+ (XTENSA_IS_ENTRY, ARG_NOF, ARG_1ST): Add gdbarch as parameter.
+ (xtensa_frame_cache): Update use of XTENSA_IS_ENTRY.
+ (xtensa_push_dummy_call): Update use of ARG_NOF.
+ (extract_call_winsize): Add gdbarch as parameter. Replace
+ current_gdbarch by gdbarch.
+ (xtensa_extract_return_value, xtensa_store_return_value): Update call
+ of extract_call_winsize.
+
+2007-11-10 Joel Brobecker <brobecker@adacore.com>
+
+ * NEWS: Add entry for new set/show print frame-args command.
+
+2007-11-09 Kevin Buettner <kevinb@redhat.com>
+
+ * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add missing
+ register number to map. Adjust warning check and error/warning
+ return value code to match expectations of this function's callers.
+
+2007-11-09 Joel Brobecker <brobecker@adacore.com>
+
+ * stack.c (print_this_frame_argument_p): Handle arguments passed
+ by reference properly.
+
+2007-11-09 Joel Brobecker <brobecker@adacore.com>
+
+ * stack.c (print_frame_arguments_choices): New static global.
+ (print_frame_arguments): Likewise.
+ (print_this_frame_argument_p): New function.
+ (print_frame_args): Print the argument value only when appropriate.
+ (_initialize_task): Add new "set/show print frame-arguments" command.
+
+2007-11-09 Luis Machado <luisgpm@br.ibm.com>
+
+ * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Move
+ saved_dabr_value assignment to the correct position.
+
+2007-11-09 Markus Deuling <deuling@de.ibm.com>
+
+ * arch-utils.c (generic_convert_register_p): Add gdbarch as parameter.
+ * arch-utils.h (generic_convert_register_p): Likewise.
+
+2007-11-09 Markus Deuling <deuling@de.ibm.com>
+
+ * gdbarch.sh (convert_register_p): Add gdbarch as parameter.
+ * ia64-tdep.c (ia64_convert_register_p): Likewise.
+ * i387-tdep.c (i387_convert_register_p): Likewise.
+ * i387-tdep.h (i387_convert_register_p): Likewise.
+ * alpha-tdep.c (alpha_convert_register_p): Likewise.
+ * gdbarch.{c,h}: Regenerate.
+
+ * rs6000-tdep.c (rs6000_convert_register_p): Add gdbarch as parameter.
+ Replace current_gdbarch by gdbarch.
+ * mips-tdep.c (mips_convert_register_p): Likewise.
+ * m68k-tdep.c (m68k_convert_register_p): Likewise.
+ * i386-tdep.c (i386_convert_register_p): Likewise.
+
+2007-11-08 Aleksandar Ristovski <aristovski@qnx.com>
+
+ * gdb_string.h: Include <strings.h>.
+
+2007-11-08 Vladimir Prus <vladimir@codesourcery.com>
+
+ * breakpoint.c (break_command_1): Remove
+ pending_bp parameter.
+ (create_breakpoint): Likewise.
+ (create_breakpoints): Likewise. Adjust call to
+ create_breakpoint.
+ (break_command_1): Likewise. Adjust call to
+ create_breakpoints.
+ (do_captured_breakpoint): Adjust call to
+ create_breakpoints.
+ (break_command, tbreak_command, hbreak_command)
+ (stopin_command, stopat_command): Adjust call
+ to break_command_1.
+
+2007-11-07 Joseph Myers <joseph@codesourcery.com>
+ Daniel Jacobowitz <dan@codesourcery.com>
+
+ * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Right-align
+ struct values smaller than one doubleword; left-align those
+ larger. Pass structs containing a single floating-point value in
+ registers.
+
+2007-11-07 Joseph Myers <joseph@codesourcery.com>
+ Daniel Jacobowitz <dan@codesourcery.com>
+
+ * gdbtypes.c (floatformats_ibm_long_double): New.
+ * gdbtypes.h (floatformats_ibm_long_double): Declare.
+ * ia64-tdep.c (floatformat_ia64_ext): Update for addition of
+ split_half field.
+ * mips-tdep.c (n32n64_floatformat_always_valid,
+ floatformat_n32n64_long_double_big, floatformats_n32n64_long):
+ Remove.
+ (mips_gdbarch_init): Use floatformats_ibm_long_double instead of
+ floatformats_n32n64_long.
+ * ppc-linux-tdep.c (ppc_linux_init_abi): Use 128-bit IBM long
+ double.
+ * doublest.c (convert_floatformat_to_doublest,
+ convert_doublest_to_floatformat): Handle split floating-point
+ formats.
+ * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Handle IBM long
+ double arguments.
+ (ppc64_sysv_abi_push_dummy_call): Likewise.
+ (do_ppc_sysv_return_value): Handle IBM long double return.
+
+2007-11-07 Vladimir Prus <vladimir@codesourcery.com>
+
+ Fix crash when a variable object being deleted
+ has any of its children deleted previously.
+
+ * varobj.c (delete_variable_1): Don't recurse
+ into deleted children.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * gdbarch.sh (legacy_virtual_frame_pointer): Add gdbarch parameter.
+ * gdbarch.{c,h}: Regenerate.
+ * arch-utils.c (legacy_virtual_frame_pointer): Add gdbarch parameter.
+ Replace current_gdbarch by gdbarch.
+ * m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
+ * mips-tdep.c (mips_virtual_frame_pointer): Likewise.
+ * spu-tdep.c (spu_virtual_frame_pointer): Likewise.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * shnbsd-tdep.c (shnbsd_supply_gregset, shnbsd_collect_gregset): Use
+ get_regcache_arch to get at the current architecture by regcache.
+ * xstormy16-tdep.c (xstormy16_frame_prev_register): Use get_frame_arch
+ to get at the current architecture by frame_info.
+ * fbsd-nat.c (fbsd_make_corefile_notes): Use get_regcache_arch to get
+ at the current architecture by regcache.
+ * gnu-v3-abi.c (gnuv3_skip_trampoline): Use get_frame_arch to get at
+ the current architecture by frame_info.
+ (build_gdb_vtable_type): Replace current_gdbarch by gdbarch.
+ * aix-thread.c (special_register_p): Add gdbarch as parameter.
+ (fetch_regs_kernel_thread, store_regs_kernel_thread): Add gdbarch to
+ caller of special_register_p.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * infcall.c (call_function_by_hand): Use get_frame_arch to get at the
+ current architecture by frame_info.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * xtensa-tdep.h (SIZEOF_GREGSET, XTENSA_ELF_NGREG) Remove.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * s390-nat.c (supply_gregset, fill_gregset): Use get_regcache_arch to
+ get at the current architecture by regcache.
+ (SUBOFF): Add gdbarch to macro definition.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * gdbarch.sh (breakpoint_from_pc): Add gdbarch parameter.
+ * gdbarch.{c,h}: Regenerate.
+
+ * xtensa-tdep.c (xtensa_breakpoint_from_pc): Add gdbarch parameter.
+ Replace current_gdbarch by gdbarch.
+ * sh-tdep.c (sh_breakpoint_from_pc): Likewise.
+ * sh64-tdep.c (sh64_breakpoint_from_pc): Likewise.
+ * score-tdep.c (score_breakpoint_from_pc): Likewise.
+ * mips-tdep.c (mips_breakpoint_from_pc): Likewise.
+ * m32r-tdep.c (m32r_breakpoint_from_pc): Likewise.
+ * iq2000-tdep.c (iq2000_breakpoint_from_pc): Likewise.
+ * arm-tdep.c (arm_breakpoint_from_pc): Likewise.
+
+ * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Add gdbarch
+ parameter.
+ * vax-tdep.c (vax_breakpoint_from_pc): Likewise.
+ * v850-tdep.c (v850_breakpoint_from_pc): Likewise.
+ * spu-tdep.c (spu_breakpoint_from_pc): Likewise.
+ * sparc-tdep.c (sparc_breakpoint_from_pc): Likewise.
+ * s390-tdep.c (s390_breakpoint_from_pc): Likewise.
+ * mn10300-tdep.c (mn10300_breakpoint_from_pc): Likewise.
+ * mt-tdep.c (mt_breakpoint_from_pc): Likewise.
+ * mep-tdep.c (mep_breakpoint_from_pc): Likewise.
+ * m88k-tdep.c (m88k_breakpoint_from_pc): Likewise.
+ * m68hc11-tdep.c (m68hc11_breakpoint_from_pc): Likewise.
+ * m32c-tdep.c (m32c_breakpoint_from_pc): Likewise.
+ * ia64-tdep.c (ia64_breakpoint_from_pc): Likewise.
+ * i386-tdep.c (i386_breakpoint_from_pc): Likewise.
+ * hppa-tdep.c (hppa_breakpoint_from_pc): Likewise.
+ * h8300-tdep.c (h8300_breakpoint_from_pc): Likewise.
+ * frv-tdep.c (frv_breakpoint_from_pc): Likewise.
+ * cris-tdep.c (cris_breakpoint_from_pc): Likewise.
+ * avr-tdep.c (avr_breakpoint_from_pc): Likewise.
+ * alpha-tdep.c (alpha_breakpoint_from_pc): Likewise.
+ * m68k-tdep.c (m68k_local_breakpoint_from_pc): Likewise.
+
+ * rs6000-tdep.c (rs6000_breakpoint_from_pc): Add gdbarch parameter.
+ Replace current_gdbarch by gdbarch.
+ (rs6000_software_single_step): Use get_frame_arch to get at the
+ current architecture by frame_info. Add gdbarch to
+ rs6000_breakpoint_from_pc call.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * frv-tdep.c (frv_register_name, frv_check_watch_resources): Replace
+ macro CURRENT_VARIANT by its expression.
+ (CURRENT_VARIANT): Remove.
+ (frv_check_watch_resources): Add gdbarch parameter.
+
+2007-11-07 Markus Deuling <deuling@de.ibm.com>
+
+ * MAINTAINERS (Write After Approval): Add self.
+
+2007-11-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * features/rs6000/power-core.xml: Use uint32 as register type.
+ * features/rs6000/power64-core.xml: Use uint64/uint32 as register type.
+ * features/rs6000/powerpc-32.c: Regenerate.
+ * features/rs6000/powerpc-403.c: Regenerate.
+ * features/rs6000/powerpc-403gc.c: Regenerate.
+ * features/rs6000/powerpc-505.c: Regenerate.
+ * features/rs6000/powerpc-602.c: Regenerate.
+ * features/rs6000/powerpc-603.c: Regenerate.
+ * features/rs6000/powerpc-604.c: Regenerate.
+ * features/rs6000/powerpc-64.c: Regenerate.
+ * features/rs6000/powerpc-7400.c: Regenerate.
+ * features/rs6000/powerpc-750.c: Regenerate.
+ * features/rs6000/powerpc-860.c: Regenerate.
+ * features/rs6000/powerpc-e500.c: Regenerate.
+
+2007-11-05 Joel Brobecker <brobecker@adacore.com>
+
+ * breakpoint.c (set_raw_breakpoint_without_location): Make static.
+
+2007-11-05 Joel Brobecker <brobecker@adacore.com>
+
+ * breakpoint.h (create_solib_load_event_breakpoint)
+ (create_solib_unload_event_breakpoint)
+ (create_fork_event_catchpoint, create_vfork_event_catchpoint)
+ (create_exec_event_catchpoint): Delete declaration.
+ * breakpoint.c (create_solib_load_event_breakpoint)
+ (solib_load_unload_1, create_solib_unload_event_breakpoint): Delete.
+ (create_fork_event_catchpoint, create_vfork_event_catchpoint)
+ (create_exec_event_catchpoint): Make static.
+
+2007-11-05 Joel Brobecker <brobecker@adacore.com>
+
+ * breakpoint.h (set_breakpoint_sal): Remove declaration.
+ * breakpoint.c (set_breakpoint_sal): Delete.
+
+2007-11-05 Joel Brobecker <brobecker@adacore.com>
+
+ * buildsym.c (finish_block): Remove "#if 1"/"#endif" brackets.
+ (make_blockvector): Likewise. Remove FIXME comment.
+
+2007-11-05 Luis Machado <luisgpm@br.ibm.com>
+
+ * printcmd.c: (printf_command): Add support for new DFP
+ modifiers %H, %D and %DD.
+ * configure.ac: Add check for DECFLOAT printf support.
+ * configure: Regenerated.
+
+2007-11-02 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbtypes.h (struct cplus_struct_type): Remove runtime_ptr member.
+ (TYPE_RUNTIME_PTR, TYPE_VTABLE, TYPE_HAS_VTABLE,
+ TYPE_PRIMARY_BASE, TYPE_VIRTUAL_BASE_LIST): Remove macros.
+ (HP_ACC_VFUNC_START, HP_ACC_VBASE_START, HP_ACC_TYPEINFO_OFFSET,
+ HP_ACC_TOP_OFFSET_OFFSET): Likewise.
+ (has_vtable, primary_base_class, virtual_base_list_length,
+ virtual_base_list_length_skip_primaries, virtual_base_index,
+ virtual_base_index_skip_primaries, class_index_in_primary_list,
+ count_virtual_fns): Remove prototypes.
+ * gdbtypes.c (has_vtable, primary_base_class, current_vbase_list,
+ virtual_base_list_aux, virtual_base_list, virtual_base_list_length,
+ virtual_base_list_length_skip_primaries, virtual_base_index,
+ virtual_base_index_skip_primaries, class_index_in_primary_list,
+ count_virtual_fns): Remove.
+
+ * cp-valprint.c (cp_print_hpacc_virtual_table_entries): Remove.
+ (hpacc_vtbl_ptr_name, hpacc_vtbl_ptr_type_name): Remove.
+ (cp_print_value_fields): Remove support for HP aCC vtables.
+ (cp_print_value): Likewise.
+ * c-typeprint.c (c_type_print_base): Likewise.
+
+ * value.h (find_rt_vbase_offset): Remove prototype.
+ * valops.c (find_rt_vbase_offset): Remove.
+ (search_struct_method): Remove support for HP aCC vtables.
+ (find_method_list): Likewise.
+
+2007-11-02 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * language.h (struct language_defn): Remove la_builtin_type_vector
+ and string_char_type members.
+ * language.c (language_string_char_type): No longer consult
+ la->string_char_type.
+ (language_lookup_primitive_type_by_name): No longer consult
+ current_language->la_builtin_type_vector.
+
+ * language.c (unknown_language_defn, auto_language_defn,
+ local_language_defn): Adapt initializer.
+ * ada-lang.c (ada_language_defn): Likewise.
+ * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn,
+ minimal_language_defn): Likewise.
+ * f-lang.c (f_language_defn): Likewise.
+ * jv-lang.c (java_language_defn): Likewise.
+ * m2-lang.c (m2_language_defn): Likewise.
+ * objc-lang.c (objc_language_defn): Likewise.
+ * p-lang.c (pascal_language_defn): Likewise.
+ * scm-lang.c (scm_language_defn): Likewise.
+
+2007-11-02 Markus Deuling <deuling@de.ibm.com>
+
+ * frame.c (frame_id_inner): Add gdbarch parameter. Replace
+ current_gdbarch by gdbarch.
+ (frame_find_by_id, get_prev_frame_1): Use get_frame_arch to get at the
+ current architecture by frame_info.
+ * frame.h (frame_id_inner): Add gdbarch parameter.
+ * stack.c (return_command): Use get_frame_arch to get at the current
+ architecture by frame_info. Update call of frame_id_inner.
+ * infrun.c (handle_inferior_event): Likewise.
+ * dummy-frame.c (dummy_frame_push): Use get_regcache_arch to get at the
+ current architecture by regcache. Update call of frame_id_inner.
+
+2007-11-02 Markus Deuling <deuling@de.ibm.com>
+
+ * gdbarch.sh (register_name): Add gdbarch parameter.
+ * gdbarch.{c,h}: Regenerate.
+
+ * target-descriptions.c (tdesc_register_name): Add gdbarch parameter.
+ (tdesc_register_name): Replace current_gdbarch by gdbarch.
+ * target-descriptions.h (tdesc_register_name): Add gdbarch parameter.
+
+ * xstormy16-tdep.c (xstormy16_register_name): Add gdbarch parameter.
+ * vax-tdep.c (vax_register_name): Add gdbarch parameter.
+ * spu-tdep.c (spu_register_name): Add gdbarch parameter.
+ * s390-tdep.c (s390_register_name): Add gdbarch parameter.
+ * mt-tdep.c (mt_register_name): Add gdbarch parameter.
+ (mt_registers_info): Replace current_gdbarch by gdbarch.
+ (mt_register_reggroup_p): Add gdbarch to mt_register_name call.
+ * mips-tdep.c (mips_register_name): Add gdbarch parameter. Replace
+ current_gdbarch by gdbarch.
+ (mips_register_name): Add gdbarch to tdesc_register_name call.
+ * mep-tdep.c (mep_register_name): Add gdbarch parameter. Replace
+ current_gdbarch by gdbarch.
+ (mep_register_reggroup_p): Add gdbarch to mep_register_name call.
+ * m32c-tdep.c (m32c_register_name): Add gdbarch parameter. Replace
+ current_gdbarch by gdbarch.
+ * m88k-tdep.c (m88k_register_name): Add gdbarch parameter.
+ * m68k-tdep.c (m68k_register_name): Add gdbarch parameter.
+ * m32r-tdep.c (m32r_register_name): Add gdbarch parameter.
+ (m32r_frame_unwind_cache): Use get_frame_arch to get at the current
+ architecture by frame_info.
+ * iq2000-tdep.c (iq2000_register_name): Add gdbarch parameter.
+ * ia64-tdep.c (ia64_register_name): Add gdbarch parameter.
+ * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Add gdbarch
+ parameter.
+ * h8300-tdep.c (h8300_register_name, h8300s_register_name)
+ (h8300sx_register_name): Add gdbarch parameter.
+ * cris-tdep.c (cris_register_name, crisv32_register_name): Add
+ gdbarch parameter. Replace current_gdbarch by gdbarch.
+ (cris_gdbarch_init): Replace current_gdbarch by gdbarch (comment).
+ * avr-tdep.c (avr_register_name): Add gdbarch parameter.
+ * arm-tdep.c (arm_register_name): Add gdbarch paramete
+ * amd64-tdep.c (amd64_register_name): Add gdbarch parameter. Update
+ caller.
+ * amd64-tdep.h (amd64_register_name): Add gdbarch parameter.
+ * amd64-linux-tdep.c (amd64_linux_register_name): Add gdbarch parameter.
+ * alpha-tdep.c (alpha_register_name): Add gdbarch parameter.
+ (alpha_cannot_fetch_register, alpha_cannot_store_register): Update call
+ of alpha_register_name.
+ * frv-tdep.c (frv_register_name): Add gdbarch parameter.
+ * i386-tdep.c (i386_register_name): Add gdbarch parameter. Replace
+ current_gdbarch by gdbarch.
+ (i386_register_type): Replace ?current_gdbarch by gdbarch.
+ * i386-tdep.h (i386_register_name): Add gdbarch parameter.
+ * i386-linux-tdep.c (i386_linux_register_name): Add gdbarch parameter.
+
+ * m68hc11-tdep.c (m68hc11_register_name): Add gdbarch parameter.
+ (m68hc11_register_reggroup_p): Add gdbarch to call of
+ m68hc11_register_name.
+ * mn10300-tdep.c (mn10300_generic_register_name, am33_register_name)
+ (am33_2_register_name): Add gdbarch parameter.
+ (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
+ architecture by frame_info.
+ (mn10300_dump_tdep): Replace current_gdbarch by gdbarch.
+ * rs6000-tdep.c (rs6000_register_name): Add gdbarch parameter. Replace
+ current_gdbarch by gdbarch.
+ * score-tdep.c (score_register_name): Add gdbarch parameter.
+ (score_return_value, score_push_dummy_call): Replace current_gdbarch
+ by gdbarch.
+ * sh64-tdep.c (sh64_register_name): Add gdbarch parameter.
+ (sh64_compact_reg_base_num, sh64_register_convert_to_virtual)
+ (sh64_register_convert_to_raw, sh64_fv_reg_base_num)
+ (sh64_dr_reg_base_num, sh64_fpp_reg_base_num): Add gdbarch parameter
+ and update caller. Replace current_gdbarch by gdbarch.
+ (sh64_extract_return_value, sh64_store_return_value): Use
+ get_regcache_arch to get at the current architecture by regcache.
+ * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name)
+ (sh_sh3e_register_name, sh_sh2e_register_name, sh_sh2a_register_name)
+ (sh_sh2a_nofpu_register_name, sh_sh_dsp_register_name)
+ (sh_sh3_dsp_register_name, sh_sh4_register_name)
+ (sh_sh4_nofpu_register_name, sh_sh4al_dsp_register_name): Add gdbarch
+ parameter.
+ (fv_reg_base_num, dr_reg_base_num, sh_justify_value_in_reg)
+ (sh_next_flt_argreg): Add gdbarch parameter and update caller. Replace
+ current_gdbarch by gdbarch.
+ (sh_extract_return_value_fpu, sh_store_return_value_fpu): Use
+ get_regcache_arch to get at the current architecture by regcache.
+ * sparc-tdep.c (sparc32_register_name): Add gdbarch parameter.
+ * sparc64-tdep.c (sparc64_register_name): Add gdbarch parameter.
+ * v850-tdep.c (v850_register_name, v850e_register_name): Add gdbarch
+ parameter.
+ (v850_unwind_sp, v850_unwind_pc): Replace current_gdbarch by gdbarch.
+ * xtensa-tdep.c (xtensa_register_name): Add gdbarch parameter. Replace
+ current_gdbarch by gdbarch.
+ (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
+ (xtensa_frame_prev_register): Add gdbarch parameter to
+ xtensa_register_name call.
+
+2007-10-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Fall back to
+ find_solib_trampoline_target if PC is not in .plt section.
+
+2007-10-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * elfread.c (elf_symtab_read): When constructing a solib trampoline
+ minimal symbol from an undefined dynamic symbol, use proper section.
+
+2007-10-31 Markus Deuling <deuling@de.ibm.com>
+
+ * arm-linux-nat.c (fetch_register, fetch_regs): Use get_regcache_arch
+ to get at the current architecture by regcache.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * libunwind-frame.c (libunwind_frame_sniffer)
+ libunwind_frame_prev_register, libunwind_sigtramp_frame_sniffer)
+ (libunwind_frame_cache): Use get_frame_arch to get at the current
+ architecture by frame_info.
+ (libunwind_get_reg_special): Replace current_gdbarch by gdbarch.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * iq2000-tdep.c (iq2000_frame_prev_register): Use get_frame_arch to get
+ at the current architecture by frame_info.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * inf-child.c (inf_child_fetch_inferior_registers): Use
+ get_regcache_arch to get at the current architecture by regcache.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * inf-ptrace.c (inf_ptrace_fetch_registers)
+ (inf_ptrace_fetch_register, inf_ptrace_store_register)
+ (inf_ptrace_store_registers): Use get_regcache_arch to get at the
+ current architecture by regcache.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * hpux-thread.c (hpux_thread_fetch_registers)
+ (hpux_thread_store_registers): Use get_regcache_arch to get at the
+ current architecture by regcache.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * hppa-tdep.c (hppa_frame_cache): Use get_frame_arch to get at the
+ current architecture by frame_info.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * go32-nat.c (fetch_register, go32_fetch_registers, store_register)
+ (go32_store_registers): Use get_regcache_arch to get at the current
+ architecture by regcache.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * gdbtypes.c (gdbtypes_post_init): Replace current_gdbarch by gdbarch.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Use get_frame_arch
+ to get at the current architecture by frame_info.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * f-lang.c (build_fortran_types): Replace current_gdbarch by gdbarch.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * core-regset.c (fetch_core_registers): Use get_regcache_arch to get at
+ the current architecture by regcache.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * corelow.c (get_core_registers): Use get_regcache_arch to get at the
+ current architecture by regcache.
+
+2007-10-30 Markus Deuling <deuling@de.ibm.com>
+
+ * bsd-uthread.c (bsd_uthread_fetch_registers)
+ (bsd_uthread_store_registers): Use get_regcache_arch to get at the
+ current architecture by regcache.
+
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* avr-tdep.c (avr_frame_unwind_cache, avr_frame_prev_register): Use
projects / deliverable / binutils-gdb.git / blobdiff