+Wed Jul 5 20:09:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * event-loop.c: Include either <poll.h> or <sys/poll.h>.
+
+ * configure.in (targ_archs): Check for <poll.h> and <sys/poll.h>.
+ * configure, config.in: Re-generate.
+
+Wed Jul 5 18:10:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ From 2000-06-12 Bill Nottingham <notting@redhat.com>:
+ * Makefile.in: add $(infodir) to FLAGS_TO_PASS
+
+Wed Jul 5 18:03:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * TODO: Updates.
+
+2000-07-05 Mark Kettenis <kettenis@gnu.org>
+
+ * TODO: Update.
+
+2000-07-03 Chris Faylor <cfg@cygnus.com>
+
+ Committed by Elena Zannoni <ezannoni@cygnus.com>
+ * sh-tdep.c (sh_skip_prologue): Change prologue matching for modern
+ compilers.
+ (sh_frame_find_saved_regs): Ditto.
+ (sh_find_callers_reg): Stop if pc is zero.
+
+Sat Jul 1 17:47:08 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * ser-unix.c (do_unix_readchar): Revert Tue Mar 28 18:19:50 2000
+ Andrew Cagney <cagney@b1.cygnus.com>. Locks up when no data is
+ pending.
+
+Sat Jul 1 15:40:14 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * Makefile.in (SER_HARDWIRE): Restore code to set it by configure.
+
+2000-06-26 Kevin Buettner <kevinb@redhat.com>
+
+ * copying.awk: Eliminate use of PARAMS from this file.
+
+Fri Jun 23 20:47:03 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * mips-tdep.c (mips_push_arguments): Use the variable stack_used_p
+ to determine if any arguments were written to the stack. Do not
+ rely on NUMARG>=8.
+
+Mon Jun 19 11:29:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * command.h (add_set_auto_boolean_cmd): Add declaration.
+ (enum var_types): Add var_auto_boolean.
+
+ * command.c (add_set_auto_boolean_cmd): New function.
+ (do_setshow_command): Recognize auto_boolean.
+ (parse_binary_operation): Recognize enable and disable.
+ (parse_auto_binary_operation): Parse auto binary variables.
+
+ * TODO: Update
+
+Fri Jun 23 16:20:21 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * mips-tdep.c (fp_register_arg_p): New function.
+ (mips_push_arguments): Use. Do not pass floating point arguments
+ on in an integer register.
+
+2000-06-21 Pierre Muller <muller@ics.u-strasbg.fr>
+ * symfile.c (init_filename_language_table): add ".pas", ".p" and ".pp"
+ as pascal source file extensions.
+
+2000-06-19 J.T. Conklin <jtc@redback.com>
+
+ * remote-nindy.c (nindy_fetch_word, nindy_store_word): Removed
+ (nindy_xfer_inferior_memory): Use dcache_xfer_memory() instead of
+ breaking transfer into chunks and using nindy_fetch_word() and
+ nindy_store_word().
+
+ * remote-bug.c (bug_xfer_memory): Use dcache_xfer_memory() instead
+ of breaking transfer into chunks and using gr_fetch_word() and
+ gr_store_word().
+
+ * remote.c (remote_fetch_word, remote_store_word): Removed.
+
+ * remote-utils.h (gr_fetch_word, gr_store_word): Removed.
+ * remote-utils.c (gr_fetch_word, gr_store_word): Removed.
+
+ * dcache.h (dcache_fetch, dcache_poke, dcache_poke_block): Removed.
+ * dcache.c (dcache_fetch, dcache_poke): Removed.
+
+2000-06-16 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * defs.h: define language_pascal in language enumeration.
+ * language.h: define _LANG_pascal macro.
+ * language.c: add language_pascal support in all language dependant
+ functions.
+
+Sun Jun 18 01:01:09 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * mips-tdep.c (mips_debug): New variable.
+ (_initialize_mips_tdep): Add command "set debug mips".
+ (mips_push_arguments): Add code to dump the argument list as it is
+ created.
+
+Sun Jun 18 00:27:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * mips-tdep.c (mips_push_arguments): For MIPS_EABI, squeeze a
+ strut containing a floating-point into an FP register.
+
+Sat Jun 17 16:00:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * remote-mips.c: Include <ctype.h>
+ (mips_receive_header): Write printable characters to gdb_stdtarg
+ instead of gdb_stdlog. Only count non-printables as invalid.
+ (mips_syn_garbage): Reduce to 10.
+
+Sat Jun 17 15:39:28 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * mips-tdep.c (mips_gdbarch_init): When the object file header
+ specifies EABI64, select EABI64 and not EABI32.
+
+2000-06-16 Nicholas Duffek <nsd@redhat.com>
+
+ * rs6000-tdep.c: Changes throughout for multi-arch 64-bit
+ support. Incorporate most of tm-rs6000.h.
+ (find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
+ (rs6000_set_host_arch_hook): Declare.
+ (read_memory_addr): Define.
+ (pop_frame): Rename to rs6000_pop_frame.
+ (rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
+ rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
+ dummy frame handling.
+ (branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
+ rs6000_frame_saved_pc, frame_get_saved_regs,
+ frame_initial_stack_address, rs6000_frame_chain,
+ rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
+ of read_memory_integer.
+ (branch_dest, rs6000_pop_frame, rs6000_push_arguments,
+ rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
+ frame_get_saved_regs, frame_initial_stack_address,
+ rs6000_frame_chain): Replace 4 with TDEP->wordsize.
+ (skip_prologue): Recognize some 64-bit stack adjustments.
+ (push_dummy_frame, pop_dummy_frame, set_processor,
+ show_processor): Delete.
+ (frame_get_saved_regs): Manipulate saved register addresses using
+ CORE_ADDR instead of int.
+ (rs6000_create_inferior): New function.
+ (register_names_*[]): Change to struct reg registers_*[].
+ (variants[]): Assimilate into multi-arch approach.
+ (register_names_*[], variants[]): Refer to pre-PowerPC
+ architectures as POWER instead of RS6000.
+ * rs6000-nat.c: Ubiquitous changes for 64-bit support.
+ (vmap_secs, xcoff_relocate_symtab): Cast addresses
+ to unsigned long to avoid sign-extension errors.
+ (set_host_arch): New function.
+ (xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
+ (rs6000_core_fns): Use new bfd_target_xcoff_flavour.
+ (_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
+ * symfile.c (find_sym_fns): Remove special xcoff kludge.
+ * xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
+ (process_linenos): Query line struct size from coff
+ backend instead of using compile-time constant.
+ (enter_line_range): Likewise.
+ (read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
+ record_debugformat() if appropriate.
+ (process_xcoff_symbol): Access symbol addresses using
+ SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
+ (read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
+ (scan_xcoff_symtab): Likewise. Query syment struct size from
+ coff backend instead of using compile-time constant.
+ (xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
+ * Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
+ that this Makefile variable get set to. (From Kevin Buettner.)
+ * config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
+ the TOC doesn't overflow. (From Kevin Buettner.)
+ * config/powerpc/tm-ppc-aix.h: Move config decisions to
+ multi-arched rs6000-tdep.c.
+ * config/rs6000/tm-rs6000.h: Likewise.
+ (GDB_MULTI_ARCH): Define.
+ (skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
+ (is_magic_function_pointer): Replace with
+ rs6000_convert_from_func_ptr_addr.
+ (TARGET_CREATE_INFERIOR_HOOK): Define.
+ (find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
+ (rs6000_set_host_arch_hook): Declare.
+ * config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
+
+2000-06-15 Kevin Buettner <kevinb@redhat.com>
+
+ * v850ice.c: Eliminate use of PARAMS from this file.
+
2000-06-15 Michael Snyder <msnyder@cygnus.com>
* valops.c (value_cast): Break up long lines.
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
- config/sparc/tm-sparc.h, config/delta/tm-delta.h,
- config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
+ config/sparc/tm-sparc.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
Provide the hooks needed to support architectures on which
projects / deliverable / binutils-gdb.git / blobdiff