+Thu Oct 07 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * breakpoint.c, breakpoint.h (breakpoint_init_inferior): New function
+ that clears the `inserted' flag for all breakpoints and deletes
+ any breakpoints which should go away between runs of programs.
+ * inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior),
+ remote-es.c (es1800_load), comments in exec.c and corelow.c:
+ Use it instead of mark_breakpoints_out.
+ * breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h
+ uses it in a completely different context.
+ * breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case.
+
+Thu Oct 07 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * Makefile.in (REGEX, REGEX1): Always use our own version of
+ regex.c to be consistent across hosts.
+ * source.c (_initialize_source): Initialize regex to use grep
+ style syntax as an approximation to POSIX basic regex syntax.
+
+Wed Oct 6 12:43:47 1993 Jeffrey A Law (law@snake.cs.utah.edu)
+ Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * hppa-tdep.c (frame_chain): Rework so that it correctly
+ handles boundaries where code with a frame pointer calls code
+ without a frame pointer.
+ (dig_fp_from_stack): New function.
+
+Wed Oct 6 12:43:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c (delete_breakpoint): Don't insert a disabled breakpoint.
+
+ * README: Add Alpha notes from Schauer.
+
+Tue Oct 5 15:26:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * Makefile.in (install, uninstall): Remove $$n.1 stuff; I don't
+ understand what it is trying to do, but I suspect it's not doing
+ it.
+
+ * config/ns32k/merlin.mh: Add comment about M_INSTALL.
+ * config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
+ M_UNINSTALL; it tries to install a non-existent file gdb.z.
+ * Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
+
+ * stabsread.c (read_range_type): Remove comment which recommends
+ distinguishing float from complex by the name.
+
+Tue Oct 5 12:17:40 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+ Jim Kingdon (kingdon@cygnus.com)
+ Stu Grossman (grossman@cygnus.com)
+
+ Changes to support alpha OSF/1 in native mode.
+ * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
+ config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
+ New files.
+ * Makefile.in: Add new files and dependencies.
+ * configure.in: Add alpha target.
+ * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
+ * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
+ shared libraries now.
+ * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
+
+ * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
+ provide `unsigned int' default.
+ * breakpoint.c (breakpoint_auto_delete): Delete only if we really
+ stopped for the breakpoint.
+ * stabsread.c, stabsread.h (define_symbol): Change valu parameter
+ to a CORE_ADDR.
+ * stabsread.c (read_range_type): Handle the case where the lower
+ bound overflows and the upper doesn't and the range is legal.
+ * infrun.c (resume): Do not step a breakpoint instruction if
+ CANNOT_STEP_BREAKPOINT is defined.
+
+ * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
+ Now that we have the bp_call_dummy breakpoint the call dummy code
+ is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
+ FIX_CALL_DUMMY can be used to set up everything for the dummy.
+ The breakpoint for the dummy is set at the entry point and thats it.
+ * blockframe.c (inside_entry_file, inside_entry_func): Do not stop
+ backtraces if pc is in the call dummy at the entry point.
+ * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
+ the expected breakpoint pc when setting up the frame for
+ set_momentary_breakpoint.
+ * symfile.c (entry_point_address): New function for AT_ENTRY_POINT
+ support.
+ * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
+
+Tue Oct 5 11:37:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
+ Change other hppa host entries to use -*- not -hp-.
+
+Mon Oct 4 19:16:14 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * i386-nlmstub.c: New file; debugging stub for i386 NetWare. Must
+ be compiled with NetWare header files and turned into an NLM with
+ nlmconv.
+
+Mon Oct 4 11:02:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * minsyms.c (lookup_minimal_symbol_by_pc): Don't use mst_abs symbols.
+
+ * dbxread.c (process_one_symbol): Make n_opt_found static.
+
+ * Rename i386lynx-tdep.c to i386ly-tdep.c for 14 character file names.
+ * Makefile.in, config/i386/i386lynx.mt: Change accordingly.
+
+ * values.c (record_latest_value): Fetch lazy values and set VALUE_LVAL
+ to not_lval.
+
+Sun Oct 3 15:54:51 1993 Stan Shebs (shebs@rtl.cygnus.com)
+
+ * objfiles.h (objfile): New slot sym_stab_info, use by most
+ stab-reading formats.
+ * gdb-stabs.h (DBX_SYMFILE_INFO): Access sym_stab_info instead of
+ sym_private.
+ * coffread.c (coff_symfile_init): Alloc struct for sym_stab_info.
+ * dbxread.c, elfread.c, paread.c: Change sym_private references to
+ sym_stab_info references.
+
+Sat Oct 2 19:28:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * mipsread.c, objfiles.c, utils.c: Use PTR not void *. RISC/OS
+ 4.02 lacks void *.
+ * elfread.c: Use void * not PTR inside PARAMS.
+
+ * config/mips/news-mips.mh: Remove coredep.o; mips-nat.o does it.
+ * config/mips/news-mips.mh: Define NAT_FILE not NM_FILE.
+ * config/mips/nm-news-mips.h: Include mips/nm-mips.h not nm-mips.h.
+
+Sat Oct 2 16:05:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in, coff-solib.c, coff-solib.h, i386lynx.mt,
+ tm-i386lynx.h: Add support for SVR3 COFF shared libraries.
+
+Sat Oct 2 15:50:41 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m88k-nat.c (store_inferior_registers): When writing all registers,
+ don't try to write EXIP_REGNUM or ENIP_REGNUM (not needed for this
+ case, and they cause trouble).
+
+ * TODO: Don't suggest doing fast watchpoints by stepping a line
+ at a time. That would be really hairy and still not fast enough.
+ Do suggest debug registers and page table diddling.
+
+Fri Oct 1 14:54:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * printcmd.c (do_examine): Make meaning of 'h', 'w', and 'g' not
+ depend on builtin_type_*. Instead, it is always 2, 4, and 8 bytes
+ like the documentation says.
+ * printcmd.c (decode_format) [CC_HAS_LONG_LONG]: Remove 'l' as
+ synonym for 'g'. This was never documented, it shouldn't depend on
+ CC_HAS_LONG_LONG, and I don't see what's wrong with 'g'.
+
+Fri Oct 1 10:06:35 1993 Kung Hsu (kung@cirdan.cygnus.com)
+
+ * symtab.c: fix a bug in testsuite (virtfunc.exp)
+
+Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m88k-nat.c (fill_gregset): Fix typo (R_SFIP -> R_FIP).
+
+ * c-typeprint.c (c_type_print_base, TYPE_FN_FIELD_STUB code):
+ If demangled name lacks a colon, don't dump core.
+
+ * blockframe.c (find_pc_partial_function): If pst->readin is
+ set, don't try to get symbols from pst.
+
+ * inflow.c (generic_mourn_inferior): Call reinit_frame_cache
+ instead of doing it ourself.
+ * blockframe.c (reinit_frame_cache): Use code which was in
+ generic_mourn_inferior so we can use this function even when
+ we have switched targets.
+ * corelow.c (core_detach): Call reinit_frame_cache.
+ * target.c (target_detach): Don't call generic_mourn_inferior
+ (revert yesterday's change, now handled by core_detach).
+ * objfiles.c (free_objfile): Detach any core file if we call
+ SOLIB_CLEAR. #include target.h.
+
+ * fork-child.c (fork_inferior): Don't call target_terminal_init
+ and target_terminal_inferior until we are sure that the inferior
+ has called gdb_setpgid. This fixes PR 2900 (Schauer tracked it
+ down and was able to reliably reproduce it by putting a sleep()
+ before the gdb_setpgid()).
+
+Thu Sep 30 12:00:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * c-exp.y, m2-exp.y: Change type of address for msymbol to
+ builtin_type_long.
+ * infptrace.c (fetch_register, store_inferior_register,
+ child_xfer_memory): Use PTRACE_XFER_TYPE for the type of ptrace
+ transfers. Provide an `int' default for PTRACE_XFER_TYPE.
+
+Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * defs.h (TARGET_*_BIT): Don't use host information (sizeof) in
+ picking defaults.
+
+ * cp-valprint.c (cp_is_vtbl_ptr_type): Continue to accept old form.
+
+Thu Sep 30 11:25:55 1993 Kung Hsu (kung@cygnus.com)
+
+ * cp-valprint.c (cp_is_vtbl_ptr_type):
+ change vtable field name to __vtbl (pr2695).
+
+ * symtab.c (gdb_mangle_name): fix a bug, to get mangled name right.
+
+Wed Sep 29 18:34:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in: Add deps for i386lynx-nat.o and i386lynx-tdep.o to
+ keep non-gnu makes happy.
+
+Wed Sep 29 10:52:19 1993 Kung Hsu (kung@cygnus.com)
+
+ * c-valprint.c: to fix virtual table print bug (pr2695).
+
+>>>>>>> 1.1795
+Wed Sep 29 10:52:19 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * target.c (target_detach): Call generic_mourn_inferior.
+ * inflow.c (generic_mourn_inferior): Call flush_cached_frames.
+
+Tue Sep 28 23:08:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * dbxread.c, coffread.c, elfread.c: A few changes to comments.
+
+Tue Sep 28 18:39:37 1993 Stan Shebs (shebs@rtl.cygnus.com)
+
+ * configure.in: Rename ...-lynx* to ...-lynxos*.
+ Add m68*-*-lynxos* configuration.
+ * dbxread.c (coffstab_build_psymtabs): New function,
+ interfaces coffread.c to dbxread functions.
+ * coffread.c (coff_symfile_info): Expand to include
+ dbx_symfile_info slots.
+ (coff_symfile_init): Init coff_symfile_info struct.
+ (coff_locate_sections): New functions, finds the stab and stabstr
+ sections.
+ (coff_symfile_read): Call coffstab_build_psymtabs if a stab
+ section is present.
+ (coff_section_offsets): Replace fake version with real offsets.
+
+Tue Sep 28 18:00:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * infcmd.c (run_stack_dummy): Set the frame in the bp_call_dummy
+ breakpoint.
+
+Tue Sep 28 17:53:26 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * config/nm-sysv4.h: Include solib.h. Define SVR4_SHARED_LIBS.
+ * config/tm-sysv4.h: Don't include solib.h.
+ * config/xm-sysv4.h: Don't define SVR4_SHARED_LIBS.
+ * config/i386/i386v4.mt (TDEPFILES): Move solib.o from here...
+ * config/i386/i386v4.mh (NATDEPFILES): ...to here.
+ * config/i386/nm-i386v4.h: Include nm-sysv4.h.
+ * config/m68k/amix.mt (TDEPFILES): Move solib.o from here...
+ * config/m68k/amix.mh (NATDEPFILES): ...to here.
+
+Tue Sep 28 09:45:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
+
+ Clean up problems with targets and hosts that have 64 bit longs
+ and pointers and 32 bit ints.
+ * breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
+ ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
+ expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
+ m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
+ printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
+ symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
+ Change all printf formats from %x to %lx if outputting an address.
+ Change la_*_format to use long format.
+ local_hex_string, local_hex_string_custom now take an unsigned long
+ argument, change all callers.
+ * coffread.c (read_coff_symtab): Remove superfluous cast for
+ complaint output.
+ * dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
+ * findvar.c, value.h (write_register): Change val to LONGEST.
+ * gdbtypes.h (struct type): Change `bitsize' to long as
+ TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
+ * inferior.h (struct inferior_status): Change type of stop_pc to
+ CORE_ADDR.
+ * language.h (local_octal_string, local_octal_string_custom):
+ Remove prototype, the functions are neither defined nor used.
+ * mipsread.c (parse_symbol): Use temporary variable for bitsize as
+ f->bitsize is a long now.
+ * objfiles.c (add_to_objfile_sections, build_objfile_section_table):
+ Use unsigned long casts instead of int for abusing sections_end
+ pointer as integer.
+ * stack.c (parse_frame_specification): Change type of `args' to
+ CORE_ADDR for SETUP_ARBITRARY_FRAME.
+
+ * printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
+ * mipsread.c (parse_type): Alpha cc now supports the t->continued
+ bit, update algorithm to match the way the compiler uses it.
+
+Tue Sep 28 12:05:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * utils.c (fprintfi_filtered): Fix comments.
+
+Mon Sep 27 18:10:08 1993 Stu Grossman (grossman at cygnus.com)
+
+ * coffread.c (read_coff_symtab): Don't call getfilename if there
+ are no auxents.
+
+Mon Sep 27 10:22:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * symtab.c (find_pc_line): Fix comments.
+
+ * remote-udi.c (udi_mourn): Don't pop target.
+
+>>>>>>> 1.1783
+Fri Sep 24 17:25:41 1993 Stu Grossman (grossman at cygnus.com)
+
+ * corelow.c: Add multi thread/process support for core files with
+ .reg/XXX pseudo-sections.
+ * i386lynx-nat.c thread.h thread.c: Remove unnecessary core file
+ support.
+
+Thu Sep 23 10:49:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote-udi.c (download): Skip zero length sections.
+
+ * valops.c (search_struct_method, value_struct_elt):
+ Use (value)-1, not -1, for error.
+
+ * infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments
+ about SHIFT_INST_REGS.
+
+ * exec.c (exec_file_command): Set text_end based on all code readonly
+ sections, not just ".text".
+
+ * defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h,
+ config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
+ z8k-tdep.c: Remove all references to ADDR_BITS_SET.
+ * config/m88k/tm-m88k.h: Define TARGET_WRITE_PC.
+
+ * config/m88k/tm-m88k.h, m88k-tdep.c: Add call function stuff.
+
+Thu Sep 23 00:13:06 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * config/mips/tm-mips.h (STORE_STRUCT_RETURN): Define as noop as
+ the pushing of the struct return address is already handled in
+ mips_push_arguments.
+ * mips-tdep.c (reinit_frame_cache_sfunc): Fix typo in prototype
+ declaration.
+ * mipsread.c (parse_symbol, parse_type, upgrade_type): Add more
+ sanity checks for corrupt symbol entries to avoid core dumps
+ reported by benson@odi.com. Obviously Ultrix 4.3A cc now has
+ the same problems as the OSF/1 alpha cc.
+ * mipsread.c (parse_lines): Iterate over the range of the compressed
+ line number entries, the old iteration sometimes failed to stop
+ and wrote past the end of the LINETABLE. Add sanity check to avoid
+ the same problem in case the line number info is corrupt.
+ * mipsread.c (parse_procedure): Adjust pdr for alpha __sigtramp.
+ * mipsread.c (parse_external, parse_partial_symbols): Ignore stNil
+ symbols that are produced for statics in .o files and stLocal symbols
+ that are produced for every section in OSF/1 dynamically linked
+ executables.
+ * mipsread.c (psymtab_to_symtab_1): Put out `undefined symbols'
+ warning only under `verbose on' as there are many undefined symbols
+ in a dynamically linked executable.
+
+Wed Sep 22 10:28:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * config/i960/nindy960.mt: Don't define REMOTE_O; REMOTE_O was
+ intended only for VxWorks. Remove dcache.o from TDEPFILES now
+ that we pick it up from the default REMOTE_O.
+
+ * breakpoint.c (bpstat_what): Initialize retval.call_dummy and
+ retval.step_resume.
+
+ * mips-tdep.c (mips_frame_chain): If frame size zero, return zero.
+ * rs6000-tdep.c: Add comment about framelessness.
+
+ * remote-nindy.c: Declare ninMemGet and ninMemPut.
+
+Wed Sep 22 08:02:57 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in: Add i386lynx-tdep to the right places.
+ (TARDIRS): Add gdbserver.
+
+ * exec.c (print_section_info): Print entry point.
+ * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
+ i386lynx-tdep.c. Add core file support.
+ * i386lynx-tdep.c: New module for Lynx/386 target dependant code.
+ * maint.c: Add `maint info sections' command to print info about all
+ sections that BFD knows about for exec and core files.
+ * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
+ before putting frame on the stack. Consolidate writes to reduce
+ traffic for remote debugging.
+ * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
+ * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
+ * config/i386/nm-i386lynx.h: Add target_pid_to_str().
+ * config/i386/tm-i386lynx.h: Remove target_pid_to_str().
+ * sparclite/Makefile.in: Add deps to keep Sun make happy.
+
+Tue Sep 21 17:48:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.h, breakpoint.c (bpstat_stop_status): Add new argument
+ not_a_breakpoint.
+ * infrun.c (wait_for_inferior): Pass it. Also consolidate the
+ test of whether we are stepping into a CURRENTLY_STEPPING macro.
+
+Tue Sep 21 17:22:34 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ * breakpoint.c (bpstat_stop_status),
+ infcmd.c (step_1),
+ infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef
+ and insert macro.
+
+ * m88k-tdep.c: include ieee-float.h. new global target_is_m88110.
+ new const struct ext_format_m88110 for float format.
+ (pic_prologue_code): add braces.
+ (next_insn): remove unused variable buf.
+ (frame_find_saved_regs): remove unused variables next_addr,
+ saved_regs, regnum.
+ (frame_locals_address): remove unused variables frame, ap.
+ (frame_args_address): remove unused variables frame, ap.
+ (push_parameters): add some breaks and a default case.
+
+ * remote-bug.c: remove redundant includes of value.h, target.h,
+ serial.h.
+ (bug_open): corrected typo, sr_multi_scan -> gr_multi_scan.
+ (bug_fetch_register): special case sfip register for m88110.
+ remove flag bit masking of pc registers. This should be handled
+ by the ADDR_BITS_* macros.
+ (bug_store_register): special case sfip register for m88110.
+ Corrected sprint format for extended registers.
+
+ * config/m88k/tm-m88k.h: white space and comment changes. include
+ ieee-float.h. expanded to cope with m88110 extended registers.
+ (R0_REGNUM, XFP_REGNUM, X0_REGNUM): new macros.
+ (SHIFT_INST_REGS): becomes a real macro.
+
+Tue Sep 21 17:48:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c (breakpoint_1): Support bp_call_dummy.
+
+Tue Sep 21 17:06:19 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * elfread.c (record_minimal_symbol_and_info): Guess the section to
+ use from the type.
+ * objfiles.c: Include gdb-stabs.h for SECT_* macros.
+ (objfile_relocate): Relocate textlow and texthigh in psymtabs.
+ Relocate partial symbols. Check that minimal SYMBOL_SECTION is
+ nonnegative before using it.
+ * symtab.h: Adjust section field comment.
+
+ * remote.c (interrupt_query): New function.
+ (remote_interrupt_twice): Call interrupt_query.
+ (putpkt, getpkt): If quit_flag is set, call interrupt_query.
+ (remote_wait): Don't bother with objfile_relocate if the addresses
+ haven't changed.
+ (remote_fetch_registers): If we see a packet that doesn't start
+ with a hex character, fetch a new one.
+
+Tue Sep 21 11:44:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote.c, remote-utils.c: Use SERIAL_FLUSH_INPUT after opening it.
+
+ * printcmd.c (print_scalar_formatted): When truncating value we are
+ going to print as unsigned, handle it generally for any length
+ less than sizeof (LONGEST), rather than special-casing sizeof (char),
+ sizeof (short), and sizeof (long). Clarify comment on what this
+ is for.
+
+ * symfile.c (deduce_language_from_filename): Accept .cxx for C++.
+ * buildsym.c (start_subfile): Use deduce_language_from_filename
+ rather than checking for .C or .cc ourself.
+
+Mon Sep 20 14:53:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * defs.h: Declare argument of re_comp as const char *.
+
+ * remote.c, remote-mips.c: Use sr_get_debug not remote_debug.
+
+ * README: Say using bfd from another release doesn't generally work.
+
+Sat Sep 18 10:13:18 1993 Jim Kingdon (kingdon@poseidon.cygnus.com)
+
+ * mipsread.c (parse_type): Don't complain() if we guessed struct
+ and it was a union, or vice versa.
+
+ * defs.h (make_cleanup): Change PTR to void * when inside PARAMS.
+
+ Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
+ * breakpoint.h (enum bptype): Add bp_call_dummy.
+ (struct bpstat_what): Add call_dummy field.
+ * infrun.c (wait_for_inferior): Deal with it.
+ * breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
+ * infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
+ * config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
+
+ * remote-sim.h: New file.
+ * remote-sim.c: Add remote debug feature. Rename stuff to distinguish
+ interface to simulator from gdb-specific stuff. Other changes.
+start-sanitize-v9
+ * remote-sp64sim.c: Renamed to remote-sim.c.
+ Use sr_get_debug instead of our own sim_verbose/simif_snoop.
+ Use gnutarget in call to bfd_openr.
+ Rename simif_* to gdbsim_*.
+ * config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c.
+end-sanitize-v9
+
+Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * findvar.c (extract_signed_integer): Cast *p to LONGEST before doing
+ the xor and subtract. Otherwise it will not sign extend if the type
+ of LONGEST is larger than int.
+ * cp-valprint.c (cp_print_class_method): Inhibit core dump if
+ domain is an undefined cross reference.
+ * valops.c (call_function_by_hand): Set real_pc to correct
+ value if CALL_DUMMY_LOCATION != ON_STACK.
+
+Thu Sep 16 20:37:06 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * config/a29k/tm-a29k.h (FRAME_CHAIN): If rsize is zero, return zero.
+
+Thu Sep 16 13:16:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * infrun.c (wait_for_inferior): Allow user to single step within
+ a stack dummy.
+
+Thu Sep 16 12:34:01 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * dbxread.c (copy_pending): Deal with END NULL.
+ (process_one_symbol): Add comments about what common_block NULL means.
+
+Wed Sep 15 14:50:26 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * remote-udi.c, remote-adapt.c, remote-mm.c: Move processor_type
+ to tm-a29k.h and a29k-tdep.c and make it an enum.
+ * a29k-tdep.c (a29k_get_processor_type): New function. Fix many
+ aspects of how we detected the processor type.
+ * remote-udi.c, remote-adapt.c, remote-mm.c (*_open): Call it
+ rather than figuring out the type ourselves.
+
+Thu Sep 16 12:12:59 1993 Stu Grossman (grossman at cygnus.com)
+
+ * sparc-stub.c (_trap_low): Do restore/save sequence after
+ setting sp to ensure that we load the previous window from the
+ right place on the stack.
+
+Thu Sep 16 00:36:32 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mipsread.c: Many changes for alpha ecoff format:
+ Correct sizeof(int) == sizeof(long) assumptions.
+ Replace stParsed hack by putting the parsed types on the pending chain.
+ Replace mips specific ecoff mapping by ECOFF_REG_TO_REGNUM macro,
+ provide default for cross debugging.
+ Swapping the symbol back is no longer needed as the symbol is not
+ modified anymore.
+ Add new alpha basic types, handle btTypedef, handle stStaticProc
+ external symbols .
+ Update and clean up cross_ref for alpha cc cross ref variations.
+ Allocate types on the type_obstack to inhibit storage leaks.
+ * config/mips/tm-mips.h (ECOFF_REG_TO_REGNUM): Define.
+ * gdbtypes.c (recursive_dump_type): Dump TYPE_TAG_NAME if it is set.
+
+Tue Sep 14 09:12:17 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * stabsread.c (read_type): Process "s" (size) type attribute.
+ If type is defined to another type, copy the type.
+
+Tue Sep 14 18:37:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * config/i386/i386v4.mh (NATDEPFILES): Move exec.o from here...
+ * config/i386/i386v4.mt (TDEPFILES): ...to here.
+
+Tue Sep 14 12:21:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ * Makefile.in (remote_utils_h): add serial.h and target.h.
+ (main.o, remote-es.o, remote-nindy.o, remote.o): remove target.h
+ (already in remote_utils_h).
+ (remote-utils.o): new rule.
+
+ * remote-utils.h: include serial.h.
+
+ * serial.h: ifdef protect from multiple inclusion.
+
+ * remote.c, remote-nindy.c, remote-mon.c, remote-es.c: include
+ remote-utils.h.
+
+ * remote.c (remote_open), remote-nindy.c (nindy_open,
+ nindy_files_info), remote-mon.c (general_open), remote-es.c
+ (es1800_open): use remote-utils facilities for baud rate.
+
+Tue Sep 14 09:12:17 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * paread.c, coffread.c, elfread.c, dwarfread.c:
+ Include <time.h> and <sys/types.h> before libbfd.h.
+
+ * paread.c: Define BYTES_IN_WORD before including aout/aout64.h.
+
+ * Makefile.in (a29k-tdep.o): Depend on $(defs_h).
+ * config/a29k/tm-a29k.h (SAVED_PC_AFTER_CALL): Use gr122 not lr0
+ if this is a transparent procedure.
+
+Mon Sep 13 16:06:43 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * remote.c: Define remote_debug to 0 and #if 0 baud_rate. Temporary
+ hack so this file compiles again.
+
+ * remote-utils.c (gr_multi_scan): Cast return value from alloca.
+ (gr_multi_scan): #if 0 never-reached return(-1).
+
+ * remote-udi.c (udi_wait): Return inferior_pid not 0.
+
+Mon Sep 13 14:14:35 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ Collect some remote things into remote-utils.
+ * remote-utils.[ch]: new files of functions collected from several
+ different remote targets.
+ * Makefile.in (REMOTE_O): add remote-utils.o.
+ (dcache_h, remote_utils_h): new macros.
+ (HFILES): add $(remote_utils_h).
+ (ALLDEPFILES): add $(remote_utils_h).
+ (dcache.o): new rule.
+ (main.o, remote-bug.o): also depend on $(remote_utils_h).
+ * target.h (remote_debug): extern moved to remote-utils.h.
+ * target.c (find_default_run_target, find_core_target): initialize
+ runable.
+ (remote_debug): moved to remote-utils.c.
+ (_initialize_targets): move declaration of user variable
+ remotedebug to remote-utils.c.
+ * remote-bug.c: include remote-utils.h rather than dcache.h.
+ (bug_close, bug_write, bug_write_cr, desc, bug_dcache, timeout,
+ dev_name, check_open, is_open, readchar, readchar_nofail,
+ pollchar, expect, expect_prompt, get_hex_digit, get_hex_byte,
+ get_hex_word, bug_kill, bug_detach, bug_create_inferior,
+ multi-scan, bug_prepare_to_store, bug_fetch_word,
+ bug_store_word, bug_files_info, bug_mourn, bug_com, bug_device,
+ bug_speed): removed and replaced with facilities from
+ remote-utils.[ch].
+ (bug_read_inferior_memory): renamed to bug_read_memory.
+ (bug_write_inferior_memory): renamed to bug_write_memory.
+ (bug_xfer_inferior_memory): renamed to bug_xfer_memory.
+ (get_word): comment out this unused function for now.
+ (bug_settings, cpu_check_strings): new statics.
+ (bug_open): rewritten to use gr_open.
+ (_initialize_remote_bug): remove declarations of commands bug,
+ device, speed.
+ * main.c: include remote-utils.h.
+ (baud_rate): removed to remote-utils.c.
+ (main): handle baud rate settings using new facilities from
+ remote-utils.
+ * defs.h (baud_rate): removed extern.
+
+ m88110 support via bug-197 monitor.
+ * remote-bug.c (get_reg_name, bug_fetch_register,
+ bug_store_register): added m88110 extended register support.
+ (wait_strings): added bug-197 prompt.
+ (bug_wait): cope with bug-197 prompt.
+ (start_load): cope with either bug-197 or bug-187 prompt.
+
+Mon Sep 13 12:53:09 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * inferior.h, infrun.c, thread.c, infcmd.c: Remove all uses of
+ pc_changed. If it was ever set to a non-zero value, it was before
+ GDB 2.8. It doesn't seem to have any useful function.
+
+ * defs.h: Don't define NORETURN (see comment).
+
+Sat Sep 11 10:46:09 1993 Jim Kingdon (kingdon@poseidon.cygnus.com)
+
+ * m88k-nat.c (fill_gregset): Set r31 and sfip.
+
+Thu Sep 9 10:18:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote-udi.c (udi_wait, case UDIStdinNeeded): Use a loop calling
+ getchar() (terminated only on '\n') instead of scanf. Send the
+ '\n' which terminates it to the remote system.
+
+ More gcc lint:
+ * exec.c (ignore): Return 0.
+ * stack.c (return_command): Fetch lazy value directly, not via
+ VALUE_CONTENTS, to avoid "value computed is not used".
+ * inflow.c (new_tty): Move osigttou inside #if.
+
+ * remote.c (remote_fetch_registers): If remote reply is short, just
+ note that fact and keep going (reading extra registers as all bits 0).
+ (remote_store_registers): Send number of registers that were found
+ by remote_fetch_registers.
+ * m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove
+ HAVE_68881. Define CANNOT_STORE_REGISTER if ptrace() can't write
+ floating registers.
+ * config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}:
+ Remove, replaced by {tm-m68k-em.h,m68k-em.mt}.
+ * Makefile.in, configure.in: Change accordingly.
+
+Thu Sep 9 04:59:03 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mipsread.c (cross_ref): Allow SGI extended symbol types as cross
+ reference targets.
+ * symmisc.c (print_symbol): Use TYPE_TAG_NAME not TYPE_NAME to avoid
+ printing of identities.
+
+Wed Sep 8 19:18:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c (breakpoint_1): Deal with step resume breakpoint.
+
Wed Sep 8 13:01:10 1993 K. Richard Pixley (rich@cygnus.com)
Gcc lint.
+ * config/m88k/tm-m88k.h (frame_find_saved_regs): prototype.
+ * config/h8300/tm-h8300.h (NUM_REGS): rewrite to avoid nested comment.
+ * blockframe.c (get_prev_frame_info): initialize address.
+ * breakpoint.c (bpstat_copy): initialize retval.
+ (bpstat_stop_status): initialize value_is_zero.
+ (bpstat_what): initialize bs_class.
+ (breakpoint_1, mention): add do-nothing case for bp_step_resume.
+ (break_command_1): initialize cond_end, addr_end, &
+ canonical_strings_chain.
+ (enable_breakpoint): initialize save_selected_frame.
+ * buildsym.c (end_symtab): initialize symtab & linetablesize.
+ * c-exp.y (parse_number): initialize i.
+ * c-typeprint.c (c_type_print_varspec_prefix): include
+ TYPE_CODE_BITSTRING in switch statements and do nothing.
+ * c-valprint.c (c_val_print): removed unused variable c.
+ * ch-valprint.c (chill_val_print): removed unused variable eltlen.
+ * cp-valprint.c (cp_print_class_method): initialize f & j.
+ * eval.c (evaluate_subexp): initialize pc2, arg1, arg2.
+ * expprint.c (print_subexp): initialize myprec, assoc, & tempstr.
+ * findvar.c (value_from_register): initialize first_addr.
+ * gdbtypes.c (lookup_struct_elt_type): localize use of temporary
+ variable typename.
+ * infcmd.c (run_stack_dummy): return zero rather than simple
+ return.
* infrun.c (wait_for_inferior): initialize stop_sp, prologue_pc.
remove symtab, appears unused.
(restore_selected_frame): return 1.
projects / deliverable / binutils-gdb.git / blobdiff